17 files changed, 1393 insertions, 163 deletions
diff --git a/dev/python/configobj/configobj.SlackBuild b/dev/python/configobj/configobj.SlackBuild
new file mode 100755
index 00000000..405354ba
--- /dev/null
+++ b/dev/python/configobj/configobj.SlackBuild
@@ -0,0 +1,144 @@
+#!/bin/bash
+#
+#  configobj.SlackBuild is free software; you can redistribute
+#  it and/or modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of the License,
+#  or any later version.
+#
+#  configobj.SlackBuild is distributed in the hope that it will
+#  be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+#  Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License along
+#  with this program; if not, write to the Free Software Foundation, Inc.,
+#  59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+#
+# slackbuild for configobj, by Silvio Rhatto
+# requires:  
+# tested: configobj-4.5.2
+#
+
+# Look for slackbuildrc
+if [ -f ~/.slackbuildrc ]; then
+  source ~/.slackbuildrc
+elif [ -f /etc/slackbuildrc ]; then
+  source /etc/slackbuildrc
+fi
+
+# Set variables
+CWD="$(pwd)"
+SRC_NAME="configobj"
+PKG_NAME="configobj"
+ARCH=${ARCH:=i486}
+SRC_VERSION=${VERSION:=4.5.2}
+PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
+BUILD=${BUILD:=1rha}
+SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
+TMP=${TMP:=/tmp}
+PKG=${PKG:=$TMP/package-$PKG_NAME}
+REPOS=${REPOS:=$TMP}
+PREFIX=${PREFIX:=/usr}
+PKG_WORK="$TMP/$SRC_NAME"
+CONF_OPTIONS=${CONF_OPTIONS:=""}
+NUMJOBS=${NUMJOBS:=""}
+
+# Set system libraries' path and optmization flags based on $ARCH
+LIBDIR="$PREFIX/lib"
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mcpu=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIR="$PREFIX/lib64"
+  LDFLAGS="-L/lib64 -L/usr/lib64"
+fi
+
+# Set error codes (used by createpkg)
+ERROR_WGET=31;      ERROR_MAKE=32;      ERROR_INSTALL=33
+ERROR_MD5=34;       ERROR_CONF=35;      ERROR_HELP=36
+ERROR_TAR=37;       ERROR_MKPKG=38;     ERROR_GPG=39
+ERROR_PATCH=40;     ERROR_VCS=41;       ERROR_MKDIR=42
+
+# Clean up any leftovers of previous builds
+rm -rf "$PKG_WORK" 2> /dev/null
+rm -rf "$PKG" 2> /dev/null
+
+# Create directories if necessary
+mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR
+mkdir -p "$PKG" || exit $ERROR_MKDIR
+mkdir -p "$REPOS" || exit $ERROR_MKDIR
+mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR
+
+# Dowload source if necessary
+SRC="$SRC_NAME-$VERSION.zip"
+URL="http://downloads.sourceforge.net/configobj/$SRC"
+
+if [ ! -s "$SRC_DIR/$SRC" ] || ! unzip -t "$SRC_DIR/$SRC" 2> /dev/null; then
+  wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
+fi
+
+# Untar
+cd "$PKG_WORK"
+unzip  "$SRC_DIR/$SRC" || exit $ERROR_TAR
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
+cd "$PKG_SRC"
+
+# Build and install package
+python setup.py build install --root=$PKG
+
+# Strip binaries
+( cd "$PKG"
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Install documentation
+DOCS="PKG-INFO docs/*"
+mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
+for doc in $DOCS; do
+  if [ -f "$doc" ]; then
+    cp -a $doc "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
+  fi
+done
+
+# Add package description (slack-desc)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+cat << EODESC > "$PKG/install/slack-desc"
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+         |-----handy-ruler----------------------------------------------------|
+configobj: configobj
+configobj:
+configobj: A python module for ultra simple handling of configuration files.
+configobj: Also useful for human readable data persistence.
+configobj: Flexible and simple.
+configobj:
+configobj:
+configobj:
+configobj:
+configobj:
+configobj:
+EODESC
+
+# Build the package
+cd "$PKG"
+makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
+
+# Delete source and build directories if requested
+if [ "$CLEANUP" == "yes" ]; then
+  rm -rf "$PKG_WORK" "$PKG"
+fi
diff --git a/dev/python/db3/db3.SlackBuild b/dev/python/db3/db3.SlackBuild
new file mode 100644
index 00000000..f4e22c20
--- /dev/null
+++ b/dev/python/db3/db3.SlackBuild
@@ -0,0 +1,183 @@
+#!/bin/bash
+#
+#  db3.SlackBuild is free software; you can redistribute
+#  it and/or modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of the License,
+#  or any later version.
+#
+#  db3.SlackBuild is distributed in the hope that it will
+#  be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+#  Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License along
+#  with this program; if not, write to the Free Software Foundation, Inc.,
+#  59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+#
+# slackbuild for db3, by Rudson R. Alves
+# requires:  
+# tested: db3-3.3.11
+#
+
+# Look for slackbuildrc
+if [ -f ~/.slackbuildrc ]; then
+  source ~/.slackbuildrc
+elif [ -f /etc/slackbuildrc ]; then
+  source /etc/slackbuildrc
+fi
+
+# Set variables
+CWD="$(pwd)"
+SRC_NAME="db"
+PKG_NAME="db3"
+ARCH=${ARCH:=i486}
+SRC_VERSION=${VERSION:=3.3.11}
+PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
+BUILD=${BUILD:=1srv}
+SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
+TMP=${TMP:=/tmp}
+PKG=${PKG:=$TMP/package-$PKG_NAME}
+REPOS=${REPOS:=$TMP}
+PREFIX=${PREFIX:=/usr}
+PKG_WORK="$TMP/$SRC_NAME"
+CONF_OPTIONS=${CONF_OPTIONS:="--enable-compat185 --disable-shared --enable-rpc"}
+NUMJOBS=${NUMJOBS:="-j3"}
+
+# Set system libraries' path and optmization flags based on $ARCH
+LIBDIR="$PREFIX/lib"
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mcpu=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIR="$PREFIX/lib64"
+  LDFLAGS="-L/lib64 -L/usr/lib64"
+fi
+
+# Set error codes (used by createpkg)
+ERROR_WGET=31;      ERROR_MAKE=32;      ERROR_INSTALL=33
+ERROR_MD5=34;       ERROR_CONF=35;      ERROR_HELP=36
+ERROR_TAR=37;       ERROR_MKPKG=38;     ERROR_GPG=39
+ERROR_PATCH=40;     ERROR_VCS=41;       ERROR_MKDIR=42
+
+# Clean up any leftovers of previous builds
+rm -rf "$PKG_WORK" 2> /dev/null
+rm -rf "$PKG" 2> /dev/null
+
+# Create directories if necessary
+mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR
+mkdir -p "$PKG" || exit $ERROR_MKDIR
+mkdir -p "$REPOS" || exit $ERROR_MKDIR
+mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR
+
+# Dowload source if necessary
+SRC="$SRC_NAME-$VERSION.tar.gz"
+URL="http://download.oracle.com/berkeley-db/$SRC"
+
+if [ ! -s "$SRC_DIR/$SRC" ] || ! gunzip -t "$SRC_DIR/$SRC" 2> /dev/null; then
+  wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
+fi
+
+# Untar
+cd "$PKG_WORK"
+tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
+cd "$PKG_SRC"
+
+# Patch source
+patches="
+         $PKG_NAME.diff $PKG_NAME-$PKG_VERSION.diff
+         $PKG_NAME-$PKG_VERSION-$ARCH.diff $PKG_NAME-$ARCH.diff"
+for patch in $patches; do
+  if [ -f "$CWD/$patch" ]; then
+    patch -Np0 < "$CWD/$patch" || exit $ERROR_PATCH
+  elif [ -f "$CWD/patches/$patch" ]; then
+    patch -Np0 < "$CWD/patches/$patch" || exit $ERROR_PATCH
+  elif [ -f "$CWD/$patch.gz" ]; then
+    gzip -dc "$CWD/$patch.gz" | patch -Np0 || exit $ERROR_PATCH
+  elif [ -f "$CWD/patches/$patch.gz" ]; then
+    gzip -dc "$CWD/patches/$patch.gz" | patch -Np0 || exit $ERROR_PATCH
+  fi
+done
+
+if echo http://slackware.cs.utah.edu/pub/slackware/slackware-12.1/pasture/source/db3/patch.3.3.11.1.gz | grep -q -v "PATCH URLS"; then
+  for patch_url in http://slackware.cs.utah.edu/pub/slackware/slackware-12.1/pasture/source/db3/patch.3.3.11.1.gz; do
+    patch="`basename $patch_url`"
+    if [ ! -s "$SRC_DIR/$patch" ]; then
+      wget "$patch_url" -O "$SRC_DIR/$patch" || exit $ERROR_WGET
+    fi
+    if [ "`basename $patch .gz`" != "$patch" ]; then
+      gzip -dc $SRC_DIR/$patch | patch -Np0 || exit $ERROR_PATCH
+    elif [ "`basename $patch .bz2`" != "$patch" ]; then
+      bzip2 -dc $SRC_DIR/$patch | patch -Np0 || exit $ERROR_PATCH
+    else
+      patch -Np0 < "$SRC_DIR/$patch" || exit $ERROR_PATCH
+    fi
+  done
+fi
+
+# Configure
+cd dist
+CFLAGS="$SLKCFLAGS" \
+  CXXFLAGS="$SLKCFLAGS" \
+  ./configure \
+  --prefix="$PREFIX" --libdir="$LIBDIR" $CONF_OPTIONS || exit $ERROR_CONF
+
+# Compile
+make $NUMJOBS || exit $ERROR_MAKE
+
+# Install
+make install DESTDIR="$PKG" || exit $ERROR_INSTALL
+
+# Strip binaries
+( cd "$PKG"
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Install documentation
+DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING LICENSE SIGNATURE readme.*"
+mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
+for doc in $DOCS; do
+  if [ -f "$doc" ]; then
+    cp -a $doc "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
+  fi
+done
+
+# Add package description (slack-desc)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+cat << EODESC > "$PKG/install/slack-desc"
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+   |-----handy-ruler----------------------------------------------------------|
+db3: db3 (Berkeley database library version 3)
+db3:
+db3: The Berkeley Database (Berkeley DB) library provides embedded database
+db3: support for both traditional and client/server applications.
+db3:
+db3: This package should be installed if compatibility is needed with
+db3: databases created with the Berkeley DB version 3.
+db3:
+EODESC
+
+# Build the package
+cd "$PKG"
+makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
+
+# Delete source and build directories if requested
+if [ "$CLEANUP" == "yes" ]; then
+  rm -rf "$PKG_WORK" "$PKG"
+fi
diff --git a/dev/python/epsilon/epsilon.SlackBuild b/dev/python/epsilon/epsilon.SlackBuild
index b03be75d..2ff23a48 100755
--- a/dev/python/epsilon/epsilon.SlackBuild
+++ b/dev/python/epsilon/epsilon.SlackBuild
@@ -1,105 +1,142 @@
 #!/bin/bash
 #
-#  epsilon.SlackBuild is free software; you can redistribute it and/or modify it under the
-#  terms of the GNU General Public License as published by the Free Software
-#  Foundation; either version 2 of the License, or any later version.
+#  epsilon.SlackBuild is free software; you can redistribute
+#  it and/or modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of the License,
+#  or any later version.
 #
-#  epsilon.SlackBuild is distributed in the hope that it will be useful, but WITHOUT ANY
-#  WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-#  A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+#  epsilon.SlackBuild is distributed in the hope that it will
+#  be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+#  Public License for more details.
 #
-#  You should have received a copy of the GNU General Public License along with
-#  this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-#  Place - Suite 330, Boston, MA 02111-1307, USA
+#  You should have received a copy of the GNU General Public License along
+#  with this program; if not, write to the Free Software Foundation, Inc.,
+#  59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
 #
-# slackbuild script for epsilon
-# by rhatto at riseup.net
+# slackbuild for epsilon, by Silvio Rhatto
+# requires: eet evas ecore embryo edje imlib2 
+# tested: epsilon-svn_version
 #
 
-if [ -s "slack-required" ]; then
-  echo Recomended and required packages for building epsilon are:
-  cat slack-required | sed -e 's/^/\t/'
-  if [ "$INTERACT" != "no" ]; then
-    echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER.
-    read crap
-#  else
-#    echo Sleeping 3 seconds...
-#    sleep 3
-  fi
-fi
-
-CWD="`pwd`"
-
+# Look for slackbuildrc
 if [ -f ~/.slackbuildrc ]; then
   source ~/.slackbuildrc
 elif [ -f /etc/slackbuildrc ]; then
   source /etc/slackbuildrc
 fi
 
-# default settings
-PACKAGE="epsilon"
+# Set variables
+CWD="$(pwd)"
+SRC_NAME="epsilon"
+PKG_NAME="epsilon"
 ARCH=${ARCH:=i486}
-VERSION="`date +%Y%m%d`"
+SRC_VERSION=${VERSION:=svn_version}
+PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
 BUILD=${BUILD:=1rha}
-SRC_DIR=${SRC:=$CWD}
+SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
 TMP=${TMP:=/tmp}
+PKG=${PKG:=$TMP/package-$PKG_NAME}
 REPOS=${REPOS:=$TMP}
-
-if [ "$ARCH" == "x86_64" ]; then
-  export LDFLAGS="-L/lib64 -L/usr/lib64"
-  LIBDIR=/usr/lib64
-else
-  LIBDIR=/usr/lib
+PREFIX=${PREFIX:=/usr}
+PKG_WORK="$TMP/$SRC_NAME"
+CONF_OPTIONS=${CONF_OPTIONS:="--sysconfdir=/etc"}
+NUMJOBS=${NUMJOBS:=""}
+
+# Set system libraries' path and optmization flags based on $ARCH
+LIBDIR="$PREFIX/lib"
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mcpu=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIR="$PREFIX/lib64"
+  LDFLAGS="-L/lib64 -L/usr/lib64"
 fi
 
-# -------  error codes for createpkg  --------------
+# Set error codes (used by createpkg)
 ERROR_WGET=31;      ERROR_MAKE=32;      ERROR_INSTALL=33
 ERROR_MD5=34;       ERROR_CONF=35;      ERROR_HELP=36
 ERROR_TAR=37;       ERROR_MKPKG=38;     ERROR_GPG=39
-ERROR_PATCH=40;     ERROR_VCS=41
-
-SRC_DIR="$SRC_DIR/efl"
-mkdir -p $SRC_DIR
-
-if [ -d "$SRC_DIR/e17/libs/epsilon" ]; then
-  cd $SRC_DIR/e17/libs/epsilon
-  cvs update || exit $ERROR_VCS
-else
-  cd $SRC_DIR
-  # echo "Please hit ENTER on passwd prompt..."
-  # cvs -d:pserver:anonymous@anoncvs.enlightenment.org:/var/cvs/e login || exit $ERROR_VCS
-  cvs -z3 -d:pserver:anonymous@anoncvs.enlightenment.org:/var/cvs/e co e17/libs/epsilon || exit $ERROR_VCS
-fi
-
-TMP="$TMP/$PACKAGE"
-rm -rf $TMP
-mkdir -p $TMP
-cd $TMP
+ERROR_PATCH=40;     ERROR_VCS=41;       ERROR_MKDIR=42
 
-cd $SRC_DIR/e17/libs/epsilon
+# Clean up any leftovers of previous builds
+rm -rf "$PKG_WORK" 2> /dev/null
+rm -rf "$PKG" 2> /dev/null
 
-make clean &> /dev/null
-./autogen.sh --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR || exit $ERROR_CONF
-make || exit $ERROR_MAKE
-make DESTDIR=$TMP/package-$PACKAGE install || exit $ERROR_INSTALL
+# Create directories if necessary
+mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR
+mkdir -p "$PKG" || exit $ERROR_MKDIR
+mkdir -p "$REPOS" || exit $ERROR_MKDIR
+mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR
 
-CWD="`pwd`"
+# Get svn source code
+cd "$SRC_DIR"
+SND_DIR="`basename http://svn.enlightenment.org/svn/e/trunk/epsilon`"
 
-cd $TMP/package-$PACKAGE
+if [ "`find "$SRC_DIR/" -name .svn`" != "" ] && [ -d "$SRC_DIR/$SND_DIR" ]; then
+  cd $SND_DIR
+  svn update || exit $ERROR_VCS
+else
+  svn checkout http://svn.enlightenment.org/svn/e/trunk/epsilon $SND_DIR || exit $ERROR_VCS
+  cd $SND_DIR
+fi
 
-find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
-find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+PKG_VERSION="`svn info | awk '/Last Changed Rev:/ { print $4 }'`_svn"
+
+# Copy svn source
+cd "$PKG_WORK"
+cp -a $SRC_DIR/* .
+PKG_SRC="$PWD/$SND_DIR"
+cd "$PKG_SRC"
+
+# Configure
+./autogen.sh || exit $ERROR_CONF
+CFLAGS="$SLKCFLAGS" \
+  CXXFLAGS="$SLKCFLAGS" \
+  ./configure \
+  --prefix="$PREFIX" --libdir="$LIBDIR" $CONF_OPTIONS || exit $ERROR_CONF
+
+# Compile
+make $NUMJOBS || exit $ERROR_MAKE
+
+# Install
+make install DESTDIR="$PKG" || exit $ERROR_INSTALL
+
+# Strip binaries
+( cd "$PKG"
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Install documentation
+DOCS="AUTHORS COPYING ChangeLog NEWS README TODO BUGS"
+mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
+for doc in $DOCS; do
+  if [ -f "$doc" ]; then
+    cp -a $doc "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
+  fi
+done
 
-mkdir install
-cat << EOF > install/slack-desc
+# Add package description (slack-desc)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+cat << EODESC > "$PKG/install/slack-desc"
 # HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
+# The "handy ruler" below makes it easier to edit a package description. Line
 # up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
+# on the right side marks the last column you can put a character in. You must
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
-       |-----handy-ruler-----------------------------------------------------|
+       |-----handy-ruler------------------------------------------------------|
 epsilon: epsilon
 epsilon: 
 epsilon: Epsilon is a small, display independent, and quick thumbnailing
@@ -111,22 +148,13 @@ epsilon:
 epsilon:
 epsilon:
 epsilon:
-EOF
-
-# docs
-mkdir -p usr/doc/$PACKAGE-$VERSION
+EODESC
 
-DOCS="AUTHORS COPYING ChangeLog CHANGELOG INSTALL NEWS README TODO"
-
-for file in $DOCS; do
-  if [ -f "$CWD/$file" ]; then
-    cp $CWD/$file usr/doc/$PACKAGE-$VERSION/
-  fi
-done
-
-makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG
+# Build the package
+cd "$PKG"
+makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
 
+# Delete source and build directories if requested
 if [ "$CLEANUP" == "yes" ]; then
-  rm -rf $TMP
+  rm -rf "$PKG_WORK" "$PKG"
 fi
-
diff --git a/dev/python/epsilon/slack-required b/dev/python/epsilon/slack-required
index 7722b8eb..1d137eb6 100644
--- a/dev/python/epsilon/slack-required
+++ b/dev/python/epsilon/slack-required
@@ -1,6 +1,9 @@
-eet
-evas
-ecore
-embryo
-edje
-imlib2
+# Dependency list to epsilon
+#
+# dependency [condition] [version]]
+eet				
+evas				
+ecore				
+embryo				
+edje				
+imlib2				
diff --git a/dev/python/genshi/Genshi.SlackBuild b/dev/python/genshi/Genshi.SlackBuild
new file mode 100755
index 00000000..c6b8fbb2
--- /dev/null
+++ b/dev/python/genshi/Genshi.SlackBuild
@@ -0,0 +1,144 @@
+#!/bin/bash
+#
+#  Genshi.SlackBuild is free software; you can redistribute
+#  it and/or modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of the License,
+#  or any later version.
+#
+#  Genshi.SlackBuild is distributed in the hope that it will
+#  be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+#  Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License along
+#  with this program; if not, write to the Free Software Foundation, Inc.,
+#  59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+#
+# slackbuild for Genshi, by Silvio Rhatto
+# requires: setuptools 
+# tested: Genshi-0.5
+#
+
+# Look for slackbuildrc
+if [ -f ~/.slackbuildrc ]; then
+  source ~/.slackbuildrc
+elif [ -f /etc/slackbuildrc ]; then
+  source /etc/slackbuildrc
+fi
+
+# Set variables
+CWD="$(pwd)"
+SRC_NAME="Genshi"
+PKG_NAME="Genshi"
+ARCH=${ARCH:=i486}
+SRC_VERSION=${VERSION:=0.5}
+PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
+BUILD=${BUILD:=1rha}
+SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
+TMP=${TMP:=/tmp}
+PKG=${PKG:=$TMP/package-$PKG_NAME}
+REPOS=${REPOS:=$TMP}
+PREFIX=${PREFIX:=/usr}
+PKG_WORK="$TMP/$SRC_NAME"
+CONF_OPTIONS=${CONF_OPTIONS:=""}
+NUMJOBS=${NUMJOBS:=""}
+
+# Set system libraries' path and optmization flags based on $ARCH
+LIBDIR="$PREFIX/lib"
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mcpu=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIR="$PREFIX/lib64"
+  LDFLAGS="-L/lib64 -L/usr/lib64"
+fi
+
+# Set error codes (used by createpkg)
+ERROR_WGET=31;      ERROR_MAKE=32;      ERROR_INSTALL=33
+ERROR_MD5=34;       ERROR_CONF=35;      ERROR_HELP=36
+ERROR_TAR=37;       ERROR_MKPKG=38;     ERROR_GPG=39
+ERROR_PATCH=40;     ERROR_VCS=41;       ERROR_MKDIR=42
+
+# Clean up any leftovers of previous builds
+rm -rf "$PKG_WORK" 2> /dev/null
+rm -rf "$PKG" 2> /dev/null
+
+# Create directories if necessary
+mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR
+mkdir -p "$PKG" || exit $ERROR_MKDIR
+mkdir -p "$REPOS" || exit $ERROR_MKDIR
+mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR
+
+# Dowload source if necessary
+SRC="$SRC_NAME-$VERSION.tar.bz2"
+URL="http://ftp.edgewall.com/pub/genshi/$SRC"
+
+if [ ! -s "$SRC_DIR/$SRC" ] || ! bunzip2 -t "$SRC_DIR/$SRC" 2> /dev/null; then
+  wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
+fi
+
+# Untar
+cd "$PKG_WORK"
+tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
+cd "$PKG_SRC"
+
+# Build and install package
+python setup.py build install --root=$PKG
+
+# Strip binaries
+( cd "$PKG"
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Install documentation
+DOCS="COPYING ChangeLog README.txt UPGRADE.txt"
+mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
+for doc in $DOCS; do
+  if [ -f "$doc" ]; then
+    cp -a $doc "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
+  fi
+done
+
+# Add package description (slack-desc)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+cat << EODESC > "$PKG/install/slack-desc"
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler-------------------------------------------------------|
+Genshi: Genshi
+Genshi: 
+Genshi: Genshi is a Python library that provides an integrated set of
+Genshi: components for parsing, generating, and processing HTML, XML
+Genshi: or other textual content for output generation on the web.
+Genshi: 
+Genshi: 
+Genshi: 
+Genshi: 
+Genshi: 
+Genshi: 
+EODESC
+
+# Build the package
+cd "$PKG"
+makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
+
+# Delete source and build directories if requested
+if [ "$CLEANUP" == "yes" ]; then
+  rm -rf "$PKG_WORK" "$PKG"
+fi
diff --git a/dev/python/genshi/slack-required b/dev/python/genshi/slack-required
new file mode 100644
index 00000000..3d6804cb
--- /dev/null
+++ b/dev/python/genshi/slack-required
@@ -0,0 +1,4 @@
+# Dependency list to Genshi
+#
+# dependency [condition] [version]]
+setuptools				
diff --git a/dev/python/mysql-python/MySQL-python.SlackBuild b/dev/python/mysql-python/MySQL-python.SlackBuild
new file mode 100644
index 00000000..a844a867
--- /dev/null
+++ b/dev/python/mysql-python/MySQL-python.SlackBuild
@@ -0,0 +1,144 @@
+#!/bin/bash
+#
+#  MySQL-python.SlackBuild is free software; you can redistribute
+#  it and/or modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of the License,
+#  or any later version.
+#
+#  MySQL-python.SlackBuild is distributed in the hope that it will
+#  be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+#  Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License along
+#  with this program; if not, write to the Free Software Foundation, Inc.,
+#  59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+#
+# slackbuild for MySQL-python, by Rudson R. Alves
+# requires: python setuptools 
+# tested: MySQL-python-1.2.2
+#
+
+# Look for slackbuildrc
+if [ -f ~/.slackbuildrc ]; then
+  source ~/.slackbuildrc
+elif [ -f /etc/slackbuildrc ]; then
+  source /etc/slackbuildrc
+fi
+
+# Set variables
+CWD="$(pwd)"
+SRC_NAME="MySQL-python"
+PKG_NAME="MySQL-python"
+ARCH=${ARCH:=i486}
+SRC_VERSION=${VERSION:=1.2.2}
+PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
+BUILD=${BUILD:=1srv}
+SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
+TMP=${TMP:=/tmp}
+PKG=${PKG:=$TMP/package-$PKG_NAME}
+REPOS=${REPOS:=$TMP}
+PREFIX=${PREFIX:=/usr}
+PKG_WORK="$TMP/$SRC_NAME"
+CONF_OPTIONS=${CONF_OPTIONS:=""}
+NUMJOBS=${NUMJOBS:="-j4"}
+
+# Set system libraries' path and optmization flags based on $ARCH
+LIBDIR="$PREFIX/lib"
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mcpu=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIR="$PREFIX/lib64"
+  LDFLAGS="-L/lib64 -L/usr/lib64"
+fi
+
+# Set error codes (used by createpkg)
+ERROR_WGET=31;      ERROR_MAKE=32;      ERROR_INSTALL=33
+ERROR_MD5=34;       ERROR_CONF=35;      ERROR_HELP=36
+ERROR_TAR=37;       ERROR_MKPKG=38;     ERROR_GPG=39
+ERROR_PATCH=40;     ERROR_VCS=41;       ERROR_MKDIR=42
+
+# Clean up any leftovers of previous builds
+rm -rf "$PKG_WORK" 2> /dev/null
+rm -rf "$PKG" 2> /dev/null
+
+# Create directories if necessary
+mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR
+mkdir -p "$PKG" || exit $ERROR_MKDIR
+mkdir -p "$REPOS" || exit $ERROR_MKDIR
+mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR
+
+# Dowload source if necessary
+SRC="$SRC_NAME-$VERSION.tar.gz"
+URL="http://downloads.sourceforge.net/MySQL-python/$SRC"
+
+if [ ! -s "$SRC_DIR/$SRC" ] || ! gunzip -t "$SRC_DIR/$SRC" 2> /dev/null; then
+  wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
+fi
+
+# Untar
+cd "$PKG_WORK"
+tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
+cd "$PKG_SRC"
+
+# Compile
+python setup.py build install --root=$PKG || exit $ERROR_MAKE
+
+# Strip binaries
+( cd "$PKG"
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Install documentation
+DOCS="ChangeLog GPL HISTORY MANIFEST MANIFEST.in PKG-INFO README "
+mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
+for doc in $DOCS; do
+  if [ -f "$doc" ]; then
+    cp -a $doc "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
+  fi
+done
+
+# Add package description (slack-desc)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+cat << EODESC > "$PKG/install/slack-desc"
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler-------------------------------------------------|
+MySQL-python: MySQL-python by Slack.Sarava
+MySQL-python: 
+MySQL-python: MySQLdb is an interface to the popular MySQL database server
+MySQL-python: for Python.  The design goals are:
+MySQL-python: * Compliance with Python database API version 2.0 [PEP-0249]
+MySQL-python: * Thread-safety
+MySQL-python: * Thread-friendliness (threads will not block each other)
+MySQL-python: 
+MySQL-python: MySQL-3.23 through 5.0 and Python-2.3 through 2.5 are currently
+MySQL-python: supported.
+MySQL-python:
+EODESC
+
+# Build the package
+cd "$PKG"
+makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
+
+# Delete source and build directories if requested
+if [ "$CLEANUP" == "yes" ]; then
+  rm -rf "$PKG_WORK" "$PKG"
+fi
diff --git a/dev/python/mysql-python/slack-required b/dev/python/mysql-python/slack-required
new file mode 100644
index 00000000..1011a0c8
--- /dev/null
+++ b/dev/python/mysql-python/slack-required
@@ -0,0 +1,6 @@
+# Dependency list to MySQL-python
+#
+# dependency [condition] [version]]
+python				
+Pyrex				
+setuptools				
diff --git a/dev/python/numpy/numpy.SlackBuild b/dev/python/numpy/numpy.SlackBuild
index 8bbdcdeb..2ff9a012 100755
--- a/dev/python/numpy/numpy.SlackBuild
+++ b/dev/python/numpy/numpy.SlackBuild
@@ -10,12 +10,12 @@
 #  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
 #  Public License for more details.
 #
-#  You should have received a copy of the GNU General Public License along with
-#  this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-#  Place - Suite 330, Boston, MA 02111-1307, USA
+#  You should have received a copy of the GNU General Public License along
+#  with this program; if not, write to the Free Software Foundation, Inc.,
+#  59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
 #
-# slackbuild for numpy, by Silvio Rhatto
-# requires: python
+# slackbuild for numpy, by Rudson R. Alves
+# requires: python lapack 
 # tested: numpy-1.0.4
 #
 
@@ -33,7 +33,7 @@ PKG_NAME="numpy"
 ARCH=${ARCH:=i486}
 SRC_VERSION=${VERSION:=1.0.4}
 PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
-BUILD=${BUILD:=1rha}
+BUILD=${BUILD:=1srv}
 SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
 TMP=${TMP:=/tmp}
 PKG=${PKG:=$TMP/package-$PKG_NAME}
@@ -41,7 +41,7 @@ REPOS=${REPOS:=$TMP}
 PREFIX=${PREFIX:=/usr}
 PKG_WORK="$TMP/$SRC_NAME"
 CONF_OPTIONS=${CONF_OPTIONS:=""}
-NUMJOBS=${NUMJOBS:=""}
+NUMJOBS=${NUMJOBS:="-j4"}
 
 # Set system libraries' path and optmization flags based on $ARCH
 LIBDIR="$PREFIX/lib"
@@ -55,8 +55,9 @@ elif [ "$ARCH" = "i686" ]; then
 elif [ "$ARCH" = "s390" ]; then
   SLKCFLAGS="-O2"
 elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2"
+  SLKCFLAGS="-O2 -fPIC"
   LIBDIR="$PREFIX/lib64"
+  LDFLAGS="-L/lib64 -L/usr/lib64"
 fi
 
 # Set error codes (used by createpkg)
@@ -83,15 +84,17 @@ if [ ! -s "$SRC_DIR/$SRC" ] || ! gunzip -t "$SRC_DIR/$SRC" 2> /dev/null; then
   wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
 fi
 
-
 # Untar
 cd "$PKG_WORK"
 tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC=`ls -l | awk '/^d/ { print $8 }'`
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
 cd "$PKG_SRC"
 
-# Build and install package
-python setup.py build install --root=$PKG
+# Compile
+python setup.py build || exit $ERROR_MAKE
+
+# Install
+python setup.py install --prefix=$PKG/usr || exit $ERROR_INSTALL
 
 # Strip binaries
 ( cd "$PKG"
@@ -114,22 +117,22 @@ done
 mkdir -p "$PKG/install" || exit $ERROR_MKDIR
 cat << EODESC > "$PKG/install/slack-desc"
 # HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
+# The "handy ruler" below makes it easier to edit a package description. Line
 # up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
+# on the right side marks the last column you can put a character in. You must
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
      |-----handy-ruler--------------------------------------------------------|
-numpy: NumPy: array processing for numbers, strings, records, and objects.
+numpy: numpy by Slack.Sarava
+numpy:
+numpy: NumPy is a replacement of Numeric Python that adds the features
+numpy: of numarray.
+numpy:
+numpy:
+numpy:
+numpy:
 numpy:
-numpy: NumPy is a general-purpose array-processing package designed to efficiently
-numpy: manipulate large multi-dimensional arrays of arbitrary records without
-numpy: sacrificing too much speed for small multi-dimensional arrays. NumPy is
-numpy: built on the Numeric code base and adds features introduced by numarray as
-numpy: well as an extended C-API and the ability to create arrays of arbitrary
-numpy: type which also makes NumPy suitable for interfacing with general-purpose
-numpy: data-base applications.
 numpy:
 numpy:
 EODESC
diff --git a/dev/python/numpy/slack-required b/dev/python/numpy/slack-required
index b53d6a78..a8ce98af 100644
--- a/dev/python/numpy/slack-required
+++ b/dev/python/numpy/slack-required
@@ -2,3 +2,4 @@
 #
 # dependency [condition] [version]]
 python				
+lapack				
diff --git a/dev/python/pygments/Pygments.SlackBuild b/dev/python/pygments/Pygments.SlackBuild
new file mode 100755
index 00000000..290570a5
--- /dev/null
+++ b/dev/python/pygments/Pygments.SlackBuild
@@ -0,0 +1,144 @@
+#!/bin/bash
+#
+#  Pygments.SlackBuild is free software; you can redistribute
+#  it and/or modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of the License,
+#  or any later version.
+#
+#  Pygments.SlackBuild is distributed in the hope that it will
+#  be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+#  Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License along
+#  with this program; if not, write to the Free Software Foundation, Inc.,
+#  59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+#
+# slackbuild for Pygments, by Silvio Rhatto
+# requires:  
+# tested: Pygments-0.10
+#
+
+# Look for slackbuildrc
+if [ -f ~/.slackbuildrc ]; then
+  source ~/.slackbuildrc
+elif [ -f /etc/slackbuildrc ]; then
+  source /etc/slackbuildrc
+fi
+
+# Set variables
+CWD="$(pwd)"
+SRC_NAME="Pygments"
+PKG_NAME="Pygments"
+ARCH=${ARCH:=i486}
+SRC_VERSION=${VERSION:=0.10}
+PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
+BUILD=${BUILD:=1rha}
+SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
+TMP=${TMP:=/tmp}
+PKG=${PKG:=$TMP/package-$PKG_NAME}
+REPOS=${REPOS:=$TMP}
+PREFIX=${PREFIX:=/usr}
+PKG_WORK="$TMP/$SRC_NAME"
+CONF_OPTIONS=${CONF_OPTIONS:=""}
+NUMJOBS=${NUMJOBS:=""}
+
+# Set system libraries' path and optmization flags based on $ARCH
+LIBDIR="$PREFIX/lib"
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mcpu=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIR="$PREFIX/lib64"
+  LDFLAGS="-L/lib64 -L/usr/lib64"
+fi
+
+# Set error codes (used by createpkg)
+ERROR_WGET=31;      ERROR_MAKE=32;      ERROR_INSTALL=33
+ERROR_MD5=34;       ERROR_CONF=35;      ERROR_HELP=36
+ERROR_TAR=37;       ERROR_MKPKG=38;     ERROR_GPG=39
+ERROR_PATCH=40;     ERROR_VCS=41;       ERROR_MKDIR=42
+
+# Clean up any leftovers of previous builds
+rm -rf "$PKG_WORK" 2> /dev/null
+rm -rf "$PKG" 2> /dev/null
+
+# Create directories if necessary
+mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR
+mkdir -p "$PKG" || exit $ERROR_MKDIR
+mkdir -p "$REPOS" || exit $ERROR_MKDIR
+mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR
+
+# Dowload source if necessary
+SRC="$SRC_NAME-$VERSION.tar.gz"
+URL="http://pypi.python.org/packages/source/P/Pygments/$SRC"
+
+if [ ! -s "$SRC_DIR/$SRC" ] || ! gunzip -t "$SRC_DIR/$SRC" 2> /dev/null; then
+  wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
+fi
+
+# Untar
+cd "$PKG_WORK"
+tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
+cd "$PKG_SRC"
+
+# Build and install package
+python setup.py build install --root=$PKG
+
+# Strip binaries
+( cd "$PKG"
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Install documentation
+DOCS="AUTHORS CHANGES LICENSE TODO"
+mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
+for doc in $DOCS; do
+  if [ -f "$doc" ]; then
+    cp -a $doc "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
+  fi
+done
+
+# Add package description (slack-desc)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+cat << EODESC > "$PKG/install/slack-desc"
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+        |-----handy-ruler-----------------------------------------------------|
+Pygments: Pygments
+Pygments:
+Pygments: Pygments is a syntax highlighting package written in Python.
+Pygments:
+Pygments:
+Pygments:
+Pygments:
+Pygments:
+Pygments:
+Pygments:
+Pygments:
+EODESC
+
+# Build the package
+cd "$PKG"
+makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
+
+# Delete source and build directories if requested
+if [ "$CLEANUP" == "yes" ]; then
+  rm -rf "$PKG_WORK" "$PKG"
+fi
diff --git a/dev/python/pyrex/Pyrex.SlackBuild b/dev/python/pyrex/Pyrex.SlackBuild
index ade78172..f570f0d5 100755
--- a/dev/python/pyrex/Pyrex.SlackBuild
+++ b/dev/python/pyrex/Pyrex.SlackBuild
@@ -10,13 +10,13 @@
 #  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
 #  Public License for more details.
 #
-#  You should have received a copy of the GNU General Public License along with
-#  this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-#  Place - Suite 330, Boston, MA 02111-1307, USA
+#  You should have received a copy of the GNU General Public License along
+#  with this program; if not, write to the Free Software Foundation, Inc.,
+#  59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
 #
-# slackbuild for Pyrex, by Silvio Rhatto
-# requires:  
-# tested: Pyrex-0.9.6.4
+# slackbuild for Pyrex, by Rudson R. Alves
+# requires: python 
+# tested: Pyrex-0.9.8.4
 #
 
 # Look for slackbuildrc
@@ -31,9 +31,9 @@ CWD="$(pwd)"
 SRC_NAME="Pyrex"
 PKG_NAME="Pyrex"
 ARCH=${ARCH:=i486}
-SRC_VERSION=${VERSION:=0.9.6.4}
+SRC_VERSION=${VERSION:=0.9.8.4}
 PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
-BUILD=${BUILD:=1rha}
+BUILD=${BUILD:=1srv}
 SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
 TMP=${TMP:=/tmp}
 PKG=${PKG:=$TMP/package-$PKG_NAME}
@@ -41,7 +41,7 @@ REPOS=${REPOS:=$TMP}
 PREFIX=${PREFIX:=/usr}
 PKG_WORK="$TMP/$SRC_NAME"
 CONF_OPTIONS=${CONF_OPTIONS:=""}
-NUMJOBS=${NUMJOBS:=""}
+NUMJOBS=${NUMJOBS:="-j4"}
 
 # Set system libraries' path and optmization flags based on $ARCH
 LIBDIR="$PREFIX/lib"
@@ -57,6 +57,7 @@ elif [ "$ARCH" = "s390" ]; then
 elif [ "$ARCH" = "x86_64" ]; then
   SLKCFLAGS="-O2 -fPIC"
   LIBDIR="$PREFIX/lib64"
+  LDFLAGS="-L/lib64 -L/usr/lib64"
 fi
 
 # Set error codes (used by createpkg)
@@ -79,18 +80,19 @@ mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR
 SRC="$SRC_NAME-$VERSION.tar.gz"
 URL="http://www.cosc.canterbury.ac.nz/greg.ewing/python/Pyrex/$SRC"
 
-if [ ! -s "$SRC_DIR/$SRC" ] || ! gunzip -t "$SRC_DIR/$SRC" 2> /dev/null; then
+#if [ ! -s "$SRC_DIR/$SRC" ] || ! gunzip -t "$SRC_DIR/$SRC" 2> /dev/null; then
+if [ ! -s "$SRC_DIR/$SRC" ]; then # gunzip test faill
   wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
 fi
 
 # Untar
 cd "$PKG_WORK"
 tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $8 }'`"
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
 cd "$PKG_SRC"
 
-# Build and install package
-python setup.py build install --root=$PKG
+# Install
+python setup.py build install --root=$PKG || exit $ERROR_INSTALL
 
 # Strip binaries
 ( cd "$PKG"
@@ -101,7 +103,7 @@ python setup.py build install --root=$PKG
 )
 
 # Install documentation
-DOCS="CHANGES.txt CHECKLIST.txt Doc/* README.txt ToDo.txt USAGE.txt"
+DOCS="CHANGES.txt CHECKLIST.txt INSTALL.txt MANIFEST.in README.txt ToDo.txt USAGE.txt"
 mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
 for doc in $DOCS; do
   if [ -f "$doc" ]; then
@@ -113,24 +115,24 @@ done
 mkdir -p "$PKG/install" || exit $ERROR_MKDIR
 cat << EODESC > "$PKG/install/slack-desc"
 # HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
+# The "handy ruler" below makes it easier to edit a package description. Line
 # up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in.  You must
+# on the right side marks the last column you can put a character in. You must
 # make exactly 11 lines for the formatting to be correct.  It's also
 # customary to leave one space after the ':'.
 
      |-----handy-ruler--------------------------------------------------------|
-Pyrex: Pyrex (Language for Writing Python Extension Modules)
-Pyrex:
-Pyrex: Pyrex lets you write code that mixes Python and C data types any
-Pyrex: way you want, and compiles it into a C extension for Python. 
-Pyrex:
-Pyrex:
-Pyrex:
-Pyrex:
-Pyrex:
-Pyrex:
-Pyrex:
+pyrex: Pyrex by Slack.Sarava
+pyrex:
+pyrex: Pyrex lets you write code that mixes Python and C data types any way
+pyrex: you want, and compiles it into a C extension for Python. 
+pyrex:
+pyrex:
+pyrex:
+pyrex:
+pyrex:
+pyrex:
+pyrex:
 EODESC
 
 # Build the package
diff --git a/dev/python/pyrex/slack-required b/dev/python/pyrex/slack-required
new file mode 100644
index 00000000..86cd5f64
--- /dev/null
+++ b/dev/python/pyrex/slack-required
@@ -0,0 +1,4 @@
+# Dependency list to Pyrex
+#
+# dependency [condition] [version]]
+python				
diff --git a/dev/python/pythondialog/pythondialog.SlackBuild b/dev/python/pythondialog/pythondialog.SlackBuild
new file mode 100644
index 00000000..f70b1bf0
--- /dev/null
+++ b/dev/python/pythondialog/pythondialog.SlackBuild
@@ -0,0 +1,149 @@
+#!/bin/bash
+#
+#  pythondialog.SlackBuild is free software; you can redistribute
+#  it and/or modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of the License,
+#  or any later version.
+#
+#  pythondialog.SlackBuild is distributed in the hope that it will
+#  be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+#  Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License along
+#  with this program; if not, write to the Free Software Foundation, Inc.,
+#  59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+#
+# slackbuild for pythondialog, by Rudson R. Alves
+# requires:  
+# tested: pythondialog-2.7
+#
+
+# Look for slackbuildrc
+if [ -f ~/.slackbuildrc ]; then
+  source ~/.slackbuildrc
+elif [ -f /etc/slackbuildrc ]; then
+  source /etc/slackbuildrc
+fi
+
+# Set variables
+CWD="$(pwd)"
+SRC_NAME="pythondialog"
+PKG_NAME="pythondialog"
+ARCH=${ARCH:=i486}
+SRC_VERSION=${VERSION:=2.7}
+PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
+BUILD=${BUILD:=1srv}
+SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
+TMP=${TMP:=/tmp}
+PKG=${PKG:=$TMP/package-$PKG_NAME}
+REPOS=${REPOS:=$TMP}
+PREFIX=${PREFIX:=/usr}
+PKG_WORK="$TMP/$SRC_NAME"
+CONF_OPTIONS=${CONF_OPTIONS:=""}
+NUMJOBS=${NUMJOBS:="-j4"}
+
+# Set system libraries' path and optmization flags based on $ARCH
+LIBDIR="$PREFIX/lib"
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mcpu=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIR="$PREFIX/lib64"
+  LDFLAGS="-L/lib64 -L/usr/lib64"
+fi
+
+# Set error codes (used by createpkg)
+ERROR_WGET=31;      ERROR_MAKE=32;      ERROR_INSTALL=33
+ERROR_MD5=34;       ERROR_CONF=35;      ERROR_HELP=36
+ERROR_TAR=37;       ERROR_MKPKG=38;     ERROR_GPG=39
+ERROR_PATCH=40;     ERROR_VCS=41;       ERROR_MKDIR=42
+
+# Clean up any leftovers of previous builds
+rm -rf "$PKG_WORK" 2> /dev/null
+rm -rf "$PKG" 2> /dev/null
+
+# Create directories if necessary
+mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR
+mkdir -p "$PKG" || exit $ERROR_MKDIR
+mkdir -p "$REPOS" || exit $ERROR_MKDIR
+mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR
+
+# Dowload source if necessary
+SRC="$SRC_NAME-$VERSION.tar.bz2"
+URL="http://downloads.sourceforge.net/pythondialog/$SRC"
+
+if [ ! -s "$SRC_DIR/$SRC" ] || ! bunzip2 -t "$SRC_DIR/$SRC" 2> /dev/null; then
+  wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
+fi
+
+# Untar
+cd "$PKG_WORK"
+tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
+cd "$PKG_SRC"
+
+# Compile
+python ./setup.py build || exit $ERROR_MAKE
+
+# Install
+python ./setup.py install --record $PREFIX --root=$PKG
+mv $PKG/usr/local/* $PKG/usr
+rm -rf $PKG/usr/local
+
+# Strip binaries
+( cd "$PKG"
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Install documentation
+DOCS="AUTHORS DEBUGGING MANIFEST.in README COPYING INSTALL PKG-INFO TODO"
+mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
+for doc in $DOCS; do
+  if [ -f "$doc" ]; then
+    cp -a $doc "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
+  fi
+done
+
+# Add package description (slack-desc)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+cat << EODESC > "$PKG/install/slack-desc"
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+            |-----handy-ruler-------------------------------------------------|
+pythondialog: pythondialog by Slack.Sarava
+pythondialog:
+pythondialog: This is a Python module for making simple Text/Console-mode
+pythondialog: user interfaces on Unix/Linux systems. 
+pythondialog:
+pythondialog:
+pythondialog:
+pythondialog:
+pythondialog:
+pythondialog:
+pythondialog:
+EODESC
+
+# Build the package
+cd "$PKG"
+makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
+
+# Delete source and build directories if requested
+if [ "$CLEANUP" == "yes" ]; then
+  rm -rf "$PKG_WORK" "$PKG"
+fi
diff --git a/dev/python/setuptools/setuptools.SlackBuild b/dev/python/setuptools/setuptools.SlackBuild
index c4861864..83631965 100755
--- a/dev/python/setuptools/setuptools.SlackBuild
+++ b/dev/python/setuptools/setuptools.SlackBuild
@@ -1,48 +1,144 @@
 #!/bin/bash
 #
-#  setuptools.SlackBuild is free software; you can redistribute it and/or modify it under the
-#  terms of the GNU General Public License as published by the Free Software
-#  Foundation; either version 2 of the License, or any later version.
+#  setuptools.SlackBuild is free software; you can redistribute
+#  it and/or modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of the License,
+#  or any later version.
 #
-#  setuptools.SlackBuild is distributed in the hope that it will be useful, but WITHOUT ANY
-#  WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-#  A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
+#  setuptools.SlackBuild is distributed in the hope that it will
+#  be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+#  Public License for more details.
 #
-#  You should have received a copy of the GNU General Public License along with
-#  this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-#  Place - Suite 330, Boston, MA 02111-1307, USA
+#  You should have received a copy of the GNU General Public License along
+#  with this program; if not, write to the Free Software Foundation, Inc.,
+#  59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
 #
-# SlackBuild script to call setuptools.build with correct settings
+# slackbuild for setuptools, by Silvio Rhatto
+# requires:  
+# tested: setuptools-0.6c8
 #
 
-CWD="`pwd`"
-
+# Look for slackbuildrc
 if [ -f ~/.slackbuildrc ]; then
   source ~/.slackbuildrc
 elif [ -f /etc/slackbuildrc ]; then
   source /etc/slackbuildrc
 fi
 
-# default settings
-PACKAGE="setuptools"
-VERSION=${VERSION:=0.6c6}
+# Set variables
+CWD="$(pwd)"
+SRC_NAME="setuptools"
+PKG_NAME="setuptools"
 ARCH=${ARCH:=i486}
+SRC_VERSION=${VERSION:=0.6c8}
+PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
 BUILD=${BUILD:=1rha}
-SRC_DIR=${SRC:=$CWD}
+SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
 TMP=${TMP:=/tmp}
+PKG=${PKG:=$TMP/package-$PKG_NAME}
 REPOS=${REPOS:=$TMP}
+PREFIX=${PREFIX:=/usr}
+PKG_WORK="$TMP/$SRC_NAME"
+CONF_OPTIONS=${CONF_OPTIONS:=""}
+NUMJOBS=${NUMJOBS:=""}
+
+# Set system libraries' path and optmization flags based on $ARCH
+LIBDIR="$PREFIX/lib"
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mcpu=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIR="$PREFIX/lib64"
+  LDFLAGS="-L/lib64 -L/usr/lib64"
+fi
 
-rm -rf $TMP/$PACKAGE
-mkdir -p $SRC_DIR/$PACKAGE $TMP/$PACKAGE $REPOS
+# Set error codes (used by createpkg)
+ERROR_WGET=31;      ERROR_MAKE=32;      ERROR_INSTALL=33
+ERROR_MD5=34;       ERROR_CONF=35;      ERROR_HELP=36
+ERROR_TAR=37;       ERROR_MKPKG=38;     ERROR_GPG=39
+ERROR_PATCH=40;     ERROR_VCS=41;       ERROR_MKDIR=42
 
-export PACKAGE VERSION ARCH BUILD SRC_DIR TMP REPOS
+# Clean up any leftovers of previous builds
+rm -rf "$PKG_WORK" 2> /dev/null
+rm -rf "$PKG" 2> /dev/null
 
-if which simpletrack &> /dev/null; then
-  simpletrack $PACKAGE.build
-else
-  slacktrack -b $REPOS -x $TMP,$SRC_DIR,/dev -jefkzp "$PACKAGE-$VERSION-$ARCH-$BUILD.tgz" "./$PACKAGE.build"
+# Create directories if necessary
+mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR
+mkdir -p "$PKG" || exit $ERROR_MKDIR
+mkdir -p "$REPOS" || exit $ERROR_MKDIR
+mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR
+
+# Dowload source if necessary
+SRC="$SRC_NAME-$VERSION.tar.gz"
+URL="http://pypi.python.org/packages/source/s/setuptools/$SRC"
+
+if [ ! -s "$SRC_DIR/$SRC" ] || ! gunzip -t "$SRC_DIR/$SRC" 2> /dev/null; then
+  wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
 fi
 
+# Untar
+cd "$PKG_WORK"
+tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
+cd "$PKG_SRC"
+
+# Build and install package
+python setup.py build install --root=$PKG
+
+# Strip binaries
+( cd "$PKG"
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Install documentation
+DOCS="PKG-INFO README.txt"
+mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
+for doc in $DOCS; do
+  if [ -f "$doc" ]; then
+    cp -a $doc "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
+  fi
+done
+
+# Add package description (slack-desc)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+cat << EODESC > "$PKG/install/slack-desc"
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+          |-----handy-ruler---------------------------------------------------|
+setuptools: setuptools 
+setuptools:
+setuptools: setuptools is a collection of enhancements to the Python distutils.
+setuptools:
+setuptools:
+setuptools:
+setuptools:
+setuptools:
+setuptools:
+setuptools:
+setuptools:
+EODESC
+
+# Build the package
+cd "$PKG"
+makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
+
+# Delete source and build directories if requested
 if [ "$CLEANUP" == "yes" ]; then
-  rm -rf $TMP/$PACKAGE
+  rm -rf "$PKG_WORK" "$PKG"
 fi
diff --git a/dev/python/visual/slack-required b/dev/python/visual/slack-required
new file mode 100644
index 00000000..4fa8a230
--- /dev/null
+++ b/dev/python/visual/slack-required
@@ -0,0 +1,22 @@
+# Dependency list to visual
+#
+# dependency [condition] [version]]
+python				
+numpy				
+gtk				
+atk				
+atkmm				
+sigc++				
+gtkmm				
+gdkmm				
+glib				
+glibmm				
+pango				
+pangomm				
+freetype2				
+gtkglext				
+gtkglextmm				
+cairo				
+cairomm				
+libglade				
+libglademm				
diff --git a/dev/python/visual/visual.SlackBuild b/dev/python/visual/visual.SlackBuild
new file mode 100644
index 00000000..8d38ade6
--- /dev/null
+++ b/dev/python/visual/visual.SlackBuild
@@ -0,0 +1,153 @@
+#!/bin/bash
+#
+#  visual.SlackBuild is free software; you can redistribute
+#  it and/or modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of the License,
+#  or any later version.
+#
+#  visual.SlackBuild is distributed in the hope that it will
+#  be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+#  Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License along
+#  with this program; if not, write to the Free Software Foundation, Inc.,
+#  59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+#
+# slackbuild for visual, by Rudson R. Alves
+# requires: python numpy gtk atk atkmm sigc++ gtkmm gdkmm glib glibmm pango pangomm freetype2 gtkglext gtkglextmm cairo cairomm libglade libglademm 
+# tested: visual-4
+#
+
+# Look for slackbuildrc
+if [ -f ~/.slackbuildrc ]; then
+  source ~/.slackbuildrc
+elif [ -f /etc/slackbuildrc ]; then
+  source /etc/slackbuildrc
+fi
+
+# Set variables
+CWD="$(pwd)"
+SRC_NAME="visual"
+PKG_NAME="visual"
+ARCH=${ARCH:=i486}
+SRC_VERSION=${VERSION:=4}
+PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
+BUILD=${BUILD:=1srv}
+SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
+TMP=${TMP:=/tmp}
+PKG=${PKG:=$TMP/package-$PKG_NAME}
+REPOS=${REPOS:=$TMP}
+PREFIX=${PREFIX:=/usr}
+PKG_WORK="$TMP/$SRC_NAME"
+CONF_OPTIONS=${CONF_OPTIONS:=""}
+NUMJOBS=${NUMJOBS:="-j4"}
+
+# Set system libraries' path and optmization flags based on $ARCH
+LIBDIR="$PREFIX/lib"
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mcpu=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIR="$PREFIX/lib64"
+  LDFLAGS="-L/lib64 -L/usr/lib64"
+fi
+
+# Set error codes (used by createpkg)
+ERROR_WGET=31;      ERROR_MAKE=32;      ERROR_INSTALL=33
+ERROR_MD5=34;       ERROR_CONF=35;      ERROR_HELP=36
+ERROR_TAR=37;       ERROR_MKPKG=38;     ERROR_GPG=39
+ERROR_PATCH=40;     ERROR_VCS=41;       ERROR_MKDIR=42
+
+# Clean up any leftovers of previous builds
+rm -rf "$PKG_WORK" 2> /dev/null
+rm -rf "$PKG" 2> /dev/null
+
+# Create directories if necessary
+mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR
+mkdir -p "$PKG" || exit $ERROR_MKDIR
+mkdir -p "$REPOS" || exit $ERROR_MKDIR
+mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR
+
+# Dowload source if necessary
+SRC="$SRC_NAME-$VERSION.beta26.tar.bz2"
+URL="http://downloads.sourceforge.net/visual/$SRC"
+
+if [ ! -s "$SRC_DIR/$SRC" ] || ! bunzip2 -t "$SRC_DIR/$SRC" 2> /dev/null; then
+  wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
+fi
+
+# Untar
+cd "$PKG_WORK"
+tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
+cd "$PKG_SRC"
+
+# Configure
+CFLAGS="$SLKCFLAGS" \
+  CXXFLAGS="$SLKCFLAGS" \
+  ./configure \
+  --prefix="$PREFIX" --libdir="$LIBDIR" $CONF_OPTIONS || exit $ERROR_CONF
+
+# Compile
+make $NUMJOBS || exit $ERROR_MAKE
+
+# Install
+make install DESTDIR="$PKG" || exit $ERROR_INSTALL
+
+# Strip binaries
+( cd "$PKG"
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Install documentation
+DOCS="HACKING.txt INSTALL.txt NEWS.txt README"
+mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
+for doc in $DOCS; do
+  if [ -f "$doc" ]; then
+    cp -a $doc "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
+  fi
+done
+
+# Add package description (slack-desc)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+cat << EODESC > "$PKG/install/slack-desc"
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+      |-----handy-ruler-------------------------------------------------------|
+visual: visual by Slack.Sarava
+visual:
+visual: VPython is a package that includes:
+visual: * the Python programming language
+visual: * the IDLE interactive development environment
+visual: * "Visual", a Python module that offers real-time 3D output, and is
+visual:   easily usable by novice programmers
+visual: * "Numeric", a Python module for fast processing of arrays
+visual:
+visual:
+visual:
+EODESC
+
+# Build the package
+cd "$PKG"
+makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
+
+# Delete source and build directories if requested
+if [ "$CLEANUP" == "yes" ]; then
+  rm -rf "$PKG_WORK" "$PKG"
+fi