path: root/templates/slamd64-11.0/packages

# This is a Slackware Installation Tagfile.
# 
# This one comes from disk: A1 (Base Linux series)
# and a backup copy called "tagfile.org" can be found on the same disk. You
# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
# the "tagfile.org" only if you want to restore original installation defaults
# by copying it over the top of "tagfile".
# 
# It is used to automate software installation. 
# There are two labels that you can use: ADD and SKP.
#
# If the PROMPT option is used during installation, this file will be checked
# to determine the installation default. First, all the lines beginning with
# <package_name>: 
# will be extracted. Then, the last line in the extracted segment will be 
# checked for the flags ADD, REC, OPT and SKP.
#
# If ADD is found, then a priority of [required] will be displayed, and the
# package will be automatically installed. 
#
# If SKP is found, then a priority of [skip] will be displayed, and
# the package will be automatically skipped.
#
# All other packages will be prompted for. There are two optional flags you
# can use to change the package priority level shown when the user is 
# prompted: REC and OPT. If REC is found, the priority shown will be
# [recommended], while if OPT is found, the user sees priority [optional].
#
# If no flags are found for a given package, the user is shown priority
# [unknown], and is prompted for whether the package should be installed.
#
# If you mess this file up beyond recognition, just restore from "tagfile.org"
# 
#
aaa_base: ADD
aaa_elflibs: ADD
acl: ADD
acpid: REC
attr: ADD
bash: ADD
bin: ADD
bzip2: ADD
coreutils: ADD
cpio: ADD
cups: REC
cxxlibs: ADD
dcron: ADD
devs: ADD
devmapper: OPT
e2fsprogs: ADD
elvis: ADD
etc: ADD
findutils: ADD
floppy: ADD
gawk: ADD
genpower: OPT
gettext: REC
glibc-solibs: ADD
glibc-zoneinfo: ADD
gpm: REC
grep: ADD
gzip: ADD
hdparm: ADD
hotplug: ADD
infozip: ADD
jfsutils: OPT
kbd: REC
kernel-modules: ADD
less: ADD
lilo: ADD
logrotate: ADD
lvm2: OPT
minicom: REC
mkinitrd: REC
module-init-tools: ADD
openssl-solibs: ADD
pciutils: OPT
pcmcia-cs: REC
pcmciautils: REC
pkgtools: ADD
procps: ADD
reiserfsprogs: ADD
sed: ADD
shadow: ADD
sharutils: ADD
slocate: ADD
smartmontools: ADD
sysfsutils: REC
sysklogd: ADD
syslinux: ADD
sysvinit: ADD
tar: ADD
tcsh: REC
udev: ADD
usbutils: ADD
utempter: REC
util-linux: ADD
xfsprogs: OPT
32atk: ADD
32base: ADD
32cairo: REC
32gtk+: ADD
32gtk+2: ADD
32pango: ADD
32x11: ADD
linux32: REC
# This is a Slackware Installation Tagfile.
#           
# This one comes from disk: AP1 (Applications series)
# and a backup copy called "tagfile.org" can be found on the same disk. You
# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
# the "tagfile.org" only if you want to restore original installation defaults
# by copying it over the top of "tagfile".
# 
# It is used to automate software installation. 
# There are two labels that you can use: ADD and SKP.
#
# If the PROMPT option is used during installation, this file will be checked
# to determine the installation default. First, all the lines beginning with
# <package_name>: 
# will be extracted. Then, the last line in the extracted segment will be 
# checked for the flags ADD, REC, OPT and SKP.
#
# If ADD is found, then a priority of [required] will be displayed, and the
# package will be automatically installed. 
#
# If SKP is found, then a priority of [skip] will be displayed, and
# the package will be automatically skipped.
#
# All other packages will be prompted for. There are two optional flags you
# can use to change the package priority level shown when the user is 
# prompted: REC and OPT. If REC is found, the priority shown will be
# [recommended], while if OPT is found, the user sees priority [optional].
#
# If no flags are found for a given package, the user is shown priority
# [unknown], and is prompted for whether the package should be installed.
#
# If you mess this file up beyond recognition, just restore from "tagfile.org"
# 
#
acct: OPT
alsa-utils: REC
amp: OPT
ash: OPT
at: OPT
aumix: OPT
bc: OPT
bpe: OPT
cdparanoia: OPT
cdrdao: OPT
cdrtools: OPT
diffutils: REC
dmapi: REC
dvd+rw-tools: OPT
enscript: OPT
espgs: REC
flac: OPT
gimp-print: OPT
gnu-gs-fonts: REC
groff: ADD
hpijs: REC
ispell: OPT
jed: OPT
joe: OPT
jove: OPT
ksh93: OPT
linuxdoc-tools: REC
lm_sensors: REC
lsof: OPT
madplay: OPT
man: ADD
man-pages: REC
mc: OPT
mdadm: OPT
most: OPT
mpg321: OPT
mt-st: OPT
mysql: OPT
normalize: OPT
quota: OPT
raidtools: OPT
rexima: REC
rpm: OPT
rzip: OPT
sc: OPT
screen: OPT
sox: REC
sudo: OPT
sysstat: OPT
texinfo: REC
vim: OPT
vorbis-tools: OPT
workbone: OPT
xfsdump: REC
zsh: OPT
autoconf: OPT
automake: OPT
bin86: ADD
binutils: ADD
bison: ADD
byacc: OPT
ccache: OPT
clisp: OPT
cscope: OPT
cvs: REC
distcc: OPT
doxygen: OPT
flex: ADD
gcc: ADD
gcc-g++: REC
gcc-g77: OPT
gcc-gnat: OPT
gcc-java: OPT
gcc-objc: OPT
gdb: REC
gettext-tools: REC
guile: OPT
git:REC
indent: OPT
kernel-headers: ADD
libtool: OPT
m4: REC
make: ADD
mercurial: REC
nasm: OPT
oprofile: OPT
p2c: OPT
perl: REC
pkgconfig: REC
pmake: REC
python: OPT
rcs: OPT
ruby: REC
strace: REC
subversion: REC
# This is a Slackware Installation Tagfile.
#
# This one comes from disk: F1 (Frequently Asked Questions)
# and a backup copy called "tagfile.org" can be found on the same disk. You
# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
# the "tagfile.org" only if you want to restore original installation defaults
# by copying it over the top of "tagfile".
# 
# It is used to automate software installation. 
# There are two labels that you can use: ADD and SKP.
#
# If the PROMPT option is used during installation, this file will be checked
# to determine the installation default. First, all the lines beginning with
# <package_name>: 
# will be extracted. Then, the last line in the extracted segment will be 
# checked for the flags ADD, REC, OPT and SKP.
#
# If ADD is found, then a priority of [required] will be displayed, and the
# package will be automatically installed. 
#
# If SKP is found, then a priority of [skip] will be displayed, and
# the package will be automatically skipped.
#
# All other packages will be prompted for. There are two optional flags you
# can use to change the package priority level shown when the user is 
# prompted: REC and OPT. If REC is found, the priority shown will be
# [recommended], while if OPT is found, the user sees priority [optional].
#
# If no flags are found for a given package, the user is shown priority
# [unknown], and is prompted for whether the package should be installed.
#
# If you mess this file up beyond recognition, just restore from "tagfile.org"
# 
#
linux-faqs: ADD
linux-howtos: ADD
kernel-source: REC
aalib: REC
alsa-driver: ADD
alsa-oss: OPT
alsa-lib: ADD
apr: REC
apr-util: REC
arts: ADD
aspell: REC
aspell-en: REC
atk: REC
audiofile: REC
cairo: REC
db42: REC
db44: REC
desktop-file-utils: REC
esound: REC
expat: REC
freetype: REC
fribidi: REC
gdk-pixbuf: REC
gd: REC
gdbm: REC
glib: REC
glib2: REC
glibc: REC
glibc-i18n: OPT
glut: REC
gnome-icon-theme: REC
gmp: REC
gnet: REC
gpgme: OPT
gtk+: REC
gtk+2: REC
hicolor-icon-theme: REC
imlib: REC
jre: REC
lcms: REC
lesstif: REC
libao: REC
libart_lgpl: REC
libassuan: OPT
libcaca: OPT
libexif: REC
libgcrypt: OPT
libglade: OPT
libgpg-error: OPT
libgpod: REC
libgsf: REC
libgtkhtml: REC
libid3tag: REC
libidl: REC
libidn: REC
libieee1284: REC
libjpeg: REC
libksba: OPT
libmad: REC
libmal: REC
libmikmod: REC
libmng: REC
libmusicbrainz: REC
libmtp: REC
libnjb: REC
libogg: REC
libpng: REC
librsvg: REC
libtermcap: REC
libtheora: REC
libtiff: REC
libtunepimp: REC
libungif: REC
libusb: REC
libvisual: REC
libvorbis: REC
libwmf: REC
libwmf-docs: OPT
libwpd: REC
libxml2: REC
libxslt: REC
mhash: REC
mm: REC
mpeg_lib: OPT
mpfr: REC
ncurses: REC
neon: REC
netpbm: REC
pango: REC
pcre: REC
pilot-link: REC
popt: REC
pth: REC
readline: REC
sdl: REC
shared-mime-info: REC
slang1: REC
slang: REC
startup-notification: ADD
svgalib: REC
t1lib: REC
taglib: REC
wv2: REC
xaw3d: REC
zlib: REC
# This is a Slackware Installation Tagfile.
#           
# This one comes from the N (Network/UUCP/Mail/News) series.
# It is used to automate software installation. 
# There are two labels that you can use: ADD and SKP.
#
# If the PROMPT option is used during installation, this file will be checked
# to determine the installation default. First, all the lines beginning with
# <package_name>: 
# will be extracted. Then, the last line in the extracted segment will be 
# checked for the flags ADD, REC, OPT and SKP.
#
# If ADD is found, then a priority of [required] will be displayed, and the
# package will be automatically installed. 
#
# If SKP is found, then a priority of [skip] will be displayed, and
# the package will be automatically skipped.
#
# All other packages will be prompted for. There are two optional flags you
# can use to change the package priority level shown when the user is 
# prompted: REC and OPT. If REC is found, the priority shown will be
# [recommended], while if OPT is found, the user sees priority [optional].
#
# If no flags are found for a given package, the user is shown priority
# [unknown], and is prompted for whether the package should be installed.
# 
#
apache: OPT
autofs: OPT
bind: REC
bitchx: OPT
bootp: OPT
curl: OPT
cyrus-sasl: REC
dhcp: OPT
dhcpcd: REC
dnsmasq: OPT
elm: OPT
epic4: OPT
fetchmail: OPT
getmail: REC
gnupg: OPT
gnupg2: OPT
imapd: OPT
inetd: REC
iproute2: OPT
iptables: ADD
iptraf: OPT
irssi: OPT
lftp: OPT
links: OPT
lynx: OPT
metamail: REC
mod_ssl: OPT
mutt: OPT
mailx: REC
nc: OPT
ncftp: OPT
netatalk: OPT
netpipes: OPT
newspost: OPT
nfs-utils: OPT
nmap: OPT
nn: OPT
ntp: OPT
openldap-client: REC
openssh: REC
openssl: REC
php: OPT
pidentd: REC
pine: OPT
pinentry: OPT
popa3d: REC
ppp: REC
portmap: REC
procmail: OPT
proftpd: REC
rdesktop: OPT
rdist: OPT
rp-pppoe: OPT
rsync: OPT
samba: OPT
sendmail-cf: OPT
sendmail: REC
slrn: OPT
stunnel: OPT
tcpdump: REC
tcpip: REC
tin: OPT
traceroute: OPT
trn: OPT
uucp: OPT
vsftpd: REC
wget: OPT
whois: OPT
wireless-tools: OPT
yptools: OPT
ytalk: REC
dejavu-ttf: REC
fontconfig: ADD
ttf-indic-fonts: REC
x11: ADD
x11-devel: ADD
x11-docs: REC
x11-docs-html: OPT
x11-fonts-100dpi: OPT
x11-fonts-cyrillic: OPT
x11-fonts-misc: ADD
x11-fonts-scale: ADD
x11-xdmx: OPT
x11-xnest: OPT
x11-xvfb: OPT
blackbox: OPT
fluxbox: OPT
fvwm: OPT
gaim: OPT
gftp: OPT
gimp: REC
gimp-help-2: REC
gkrellm: OPT
gnuchess: REC
gnuplot: OPT
gucharmap: OPT
gv: REC
gxine: OPT
imagemagick: REC
mozilla-firefox: REC
pan: REC
rxvt: REC
sane: OPT
seamonkey: REC
seyon: OPT
vim-gvim: REC
windowmaker: REC
xfm: OPT
x3270: OPT
xchat: OPT
xgames: OPT
xfce: OPT
xfractint: OPT
xine-lib: REC
xine-ui: REC
xmms: OPT
xpaint: OPT
xpdf: OPT
xsane: REC
xlockmore: REC
xscreensaver: REC
xv: REC
# This is a Slackware Installation Tagfile.
#
# This one comes from disk: Y1 (Yaaaaaahhoooo? Games and Amusements).
# 
# It is used to automate software installation. 
# There are two labels that you can use: ADD and SKP.
#
# If the PROMPT option is used during installation, this file will be checked
# to determine the installation default. First, all the lines beginning with
# <package_name>: 
# will be extracted. Then, the last line in the extracted segment will be 
# checked for the flags ADD, REC, OPT and SKP.
#
# If ADD is found, then a priority of [required] will be displayed, and the
# package will be automatically installed. 
#
# If SKP is found, then a priority of [skip] will be displayed, and
# the package will be automatically skipped.
#
# All other packages will be prompted for. There are two optional flags you
# can use to change the package priority level shown when the user is 
# prompted: REC and OPT. If REC is found, the priority shown will be
# [recommended], while if OPT is found, the user sees priority [optional].
#
# If no flags are found for a given package, the user is shown priority
# [unknown], and is prompted for whether the package should be installed.
bsd-games: OPT
# Tagfile for emacs series
emacs: ADD
emacs-misc: REC
emacs-lisp: OPT
emacs-leim: OPT
emacs-nox: OPT
emacs-info: REC
tetex: ADD
tetex-doc: REC
xfig: OPT
transfig: OPT
# This is a Slackware Installation Tagfile.
#           
# This one comes from disk: TCL1 (Tcl/Tk series)
# and a backup copy called "tagfile.org" can be found on the same disk. You
# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
# the "tagfile.org" only if you want to restore original installation defaults
# by copying it over the top of "tagfile".
# 
# It is used to automate software installation. 
# There are two labels that you can use: ADD and SKP.
#
# If the PROMPT option is used during installation, this file will be checked
# to determine the installation default. First, all the lines beginning with
# <package_name>: 
# will be extracted. Then, the last line in the extracted segment will be 
# checked for the flags ADD, REC, OPT and SKP.
#
# If ADD is found, then a priority of [required] will be displayed, and the
# package will be automatically installed. 
#
# If SKP is found, then a priority of [skip] will be displayed, and
# the package will be automatically skipped.
#
# All other packages will be prompted for. There are two optional flags you
# can use to change the package priority level shown when the user is 
# prompted: REC and OPT. If REC is found, the priority shown will be
# [recommended], while if OPT is found, the user sees priority [optional].
#
# If no flags are found for a given package, the user is shown priority
# [unknown], and is prompted for whether the package should be installed.
#
# If you mess this file up beyond recognition, just restore from "tagfile.org"
# 
#
expect: OPT
hfsutils: OPT
tcl: ADD
tclx: REC
tk: REC
tix: OPT
amarok: OPT
kdeaccessibility: OPT
kdeaddons: OPT
kdeadmin: ADD
kdeartwork: ADD
kdebase: ADD
kdebindings: OPT
kdeedu: REC
kdegames: REC
kdegraphics: ADD
kdelibs: ADD
kdemultimedia: REC
kdenetwork: REC
kdepim: REC
kdesdk: OPT
kdetoys: REC
kdeutils: ADD
kdevelop: OPT
kdewebdev: OPT
koffice: REC
qca: REC
qca-tls: REC
qt: ADD
# contrib packages section begins here
slacktrack
simplepkg