diff options
Diffstat (limited to 'templates/slamd64-11.0/packages')
| -rw-r--r-- | templates/slamd64-11.0/packages | 627 |
1 files changed, 627 insertions, 0 deletions
diff --git a/templates/slamd64-11.0/packages b/templates/slamd64-11.0/packages new file mode 100644 index 0000000..d6a0bb4 --- /dev/null +++ b/templates/slamd64-11.0/packages @@ -0,0 +1,627 @@ +# This is a Slackware Installation Tagfile. +# +# This one comes from disk: A1 (Base Linux series) +# and a backup copy called "tagfile.org" can be found on the same disk. You +# should never edit the "tagfile.org" copy, only the one called "tagfile". Use +# the "tagfile.org" only if you want to restore original installation defaults +# by copying it over the top of "tagfile". +# +# It is used to automate software installation. +# There are two labels that you can use: ADD and SKP. +# +# If the PROMPT option is used during installation, this file will be checked +# to determine the installation default. First, all the lines beginning with +# <package_name>: +# will be extracted. Then, the last line in the extracted segment will be +# checked for the flags ADD, REC, OPT and SKP. +# +# If ADD is found, then a priority of [required] will be displayed, and the +# package will be automatically installed. +# +# If SKP is found, then a priority of [skip] will be displayed, and +# the package will be automatically skipped. +# +# All other packages will be prompted for. There are two optional flags you +# can use to change the package priority level shown when the user is +# prompted: REC and OPT. If REC is found, the priority shown will be +# [recommended], while if OPT is found, the user sees priority [optional]. +# +# If no flags are found for a given package, the user is shown priority +# [unknown], and is prompted for whether the package should be installed. +# +# If you mess this file up beyond recognition, just restore from "tagfile.org" +# +# +aaa_base: ADD +aaa_elflibs: ADD +acl: ADD +acpid: REC +attr: ADD +bash: ADD +bin: ADD +bzip2: ADD +coreutils: ADD +cpio: ADD +cups: REC +cxxlibs: ADD +dcron: ADD +devs: ADD +devmapper: OPT +e2fsprogs: ADD +elvis: ADD +etc: ADD +findutils: ADD +floppy: ADD +gawk: ADD +genpower: OPT +gettext: REC +glibc-solibs: ADD +glibc-zoneinfo: ADD +gpm: REC +grep: ADD +gzip: ADD +hdparm: ADD +hotplug: ADD +infozip: ADD +jfsutils: OPT +kbd: REC +kernel-modules: ADD +less: ADD +lilo: ADD +logrotate: ADD +lvm2: OPT +minicom: REC +mkinitrd: REC +module-init-tools: ADD +openssl-solibs: ADD +pciutils: OPT +pcmcia-cs: REC +pcmciautils: REC +pkgtools: ADD +procps: ADD +reiserfsprogs: ADD +sed: ADD +shadow: ADD +sharutils: ADD +slocate: ADD +smartmontools: ADD +sysfsutils: REC +sysklogd: ADD +syslinux: ADD +sysvinit: ADD +tar: ADD +tcsh: REC +udev: ADD +usbutils: ADD +utempter: REC +util-linux: ADD +xfsprogs: OPT +32atk: ADD +32base: ADD +32cairo: REC +32gtk+: ADD +32gtk+2: ADD +32pango: ADD +32x11: ADD +linux32: REC +# This is a Slackware Installation Tagfile. +# +# This one comes from disk: AP1 (Applications series) +# and a backup copy called "tagfile.org" can be found on the same disk. You +# should never edit the "tagfile.org" copy, only the one called "tagfile". Use +# the "tagfile.org" only if you want to restore original installation defaults +# by copying it over the top of "tagfile". +# +# It is used to automate software installation. +# There are two labels that you can use: ADD and SKP. +# +# If the PROMPT option is used during installation, this file will be checked +# to determine the installation default. First, all the lines beginning with +# <package_name>: +# will be extracted. Then, the last line in the extracted segment will be +# checked for the flags ADD, REC, OPT and SKP. +# +# If ADD is found, then a priority of [required] will be displayed, and the +# package will be automatically installed. +# +# If SKP is found, then a priority of [skip] will be displayed, and +# the package will be automatically skipped. +# +# All other packages will be prompted for. There are two optional flags you +# can use to change the package priority level shown when the user is +# prompted: REC and OPT. If REC is found, the priority shown will be +# [recommended], while if OPT is found, the user sees priority [optional]. +# +# If no flags are found for a given package, the user is shown priority +# [unknown], and is prompted for whether the package should be installed. +# +# If you mess this file up beyond recognition, just restore from "tagfile.org" +# +# +acct: OPT +alsa-utils: REC +amp: OPT +ash: OPT +at: OPT +aumix: OPT +bc: OPT +bpe: OPT +cdparanoia: OPT +cdrdao: OPT +cdrtools: OPT +diffutils: REC +dmapi: REC +dvd+rw-tools: OPT +enscript: OPT +espgs: REC +flac: OPT +gimp-print: OPT +gnu-gs-fonts: REC +groff: ADD +hpijs: REC +ispell: OPT +jed: OPT +joe: OPT +jove: OPT +ksh93: OPT +linuxdoc-tools: REC +lm_sensors: REC +lsof: OPT +madplay: OPT +man: ADD +man-pages: REC +mc: OPT +mdadm: OPT +most: OPT +mpg321: OPT +mt-st: OPT +mysql: OPT +normalize: OPT +quota: OPT +raidtools: OPT +rexima: REC +rpm: OPT +rzip: OPT +sc: OPT +screen: OPT +sox: REC +sudo: OPT +sysstat: OPT +texinfo: REC +vim: OPT +vorbis-tools: OPT +workbone: OPT +xfsdump: REC +zsh: OPT +autoconf: OPT +automake: OPT +bin86: ADD +binutils: ADD +bison: ADD +byacc: OPT +ccache: OPT +clisp: OPT +cscope: OPT +cvs: REC +distcc: OPT +doxygen: OPT +flex: ADD +gcc: ADD +gcc-g++: REC +gcc-g77: OPT +gcc-gnat: OPT +gcc-java: OPT +gcc-objc: OPT +gdb: REC +gettext-tools: REC +guile: OPT +git:REC +indent: OPT +kernel-headers: ADD +libtool: OPT +m4: REC +make: ADD +mercurial: REC +nasm: OPT +oprofile: OPT +p2c: OPT +perl: REC +pkgconfig: REC +pmake: REC +python: OPT +rcs: OPT +ruby: REC +strace: REC +subversion: REC +# This is a Slackware Installation Tagfile. +# +# This one comes from disk: F1 (Frequently Asked Questions) +# and a backup copy called "tagfile.org" can be found on the same disk. You +# should never edit the "tagfile.org" copy, only the one called "tagfile". Use +# the "tagfile.org" only if you want to restore original installation defaults +# by copying it over the top of "tagfile". +# +# It is used to automate software installation. +# There are two labels that you can use: ADD and SKP. +# +# If the PROMPT option is used during installation, this file will be checked +# to determine the installation default. First, all the lines beginning with +# <package_name>: +# will be extracted. Then, the last line in the extracted segment will be +# checked for the flags ADD, REC, OPT and SKP. +# +# If ADD is found, then a priority of [required] will be displayed, and the +# package will be automatically installed. +# +# If SKP is found, then a priority of [skip] will be displayed, and +# the package will be automatically skipped. +# +# All other packages will be prompted for. There are two optional flags you +# can use to change the package priority level shown when the user is +# prompted: REC and OPT. If REC is found, the priority shown will be +# [recommended], while if OPT is found, the user sees priority [optional]. +# +# If no flags are found for a given package, the user is shown priority +# [unknown], and is prompted for whether the package should be installed. +# +# If you mess this file up beyond recognition, just restore from "tagfile.org" +# +# +linux-faqs: ADD +linux-howtos: ADD +kernel-source: REC +aalib: REC +alsa-driver: ADD +alsa-oss: OPT +alsa-lib: ADD +apr: REC +apr-util: REC +arts: ADD +aspell: REC +aspell-en: REC +atk: REC +audiofile: REC +cairo: REC +db42: REC +db44: REC +desktop-file-utils: REC +esound: REC +expat: REC +freetype: REC +fribidi: REC +gdk-pixbuf: REC +gd: REC +gdbm: REC +glib: REC +glib2: REC +glibc: REC +glibc-i18n: OPT +glut: REC +gnome-icon-theme: REC +gmp: REC +gnet: REC +gpgme: OPT +gtk+: REC +gtk+2: REC +hicolor-icon-theme: REC +imlib: REC +jre: REC +lcms: REC +lesstif: REC +libao: REC +libart_lgpl: REC +libassuan: OPT +libcaca: OPT +libexif: REC +libgcrypt: OPT +libglade: OPT +libgpg-error: OPT +libgpod: REC +libgsf: REC +libgtkhtml: REC +libid3tag: REC +libidl: REC +libidn: REC +libieee1284: REC +libjpeg: REC +libksba: OPT +libmad: REC +libmal: REC +libmikmod: REC +libmng: REC +libmusicbrainz: REC +libmtp: REC +libnjb: REC +libogg: REC +libpng: REC +librsvg: REC +libtermcap: REC +libtheora: REC +libtiff: REC +libtunepimp: REC +libungif: REC +libusb: REC +libvisual: REC +libvorbis: REC +libwmf: REC +libwmf-docs: OPT +libwpd: REC +libxml2: REC +libxslt: REC +mhash: REC +mm: REC +mpeg_lib: OPT +mpfr: REC +ncurses: REC +neon: REC +netpbm: REC +pango: REC +pcre: REC +pilot-link: REC +popt: REC +pth: REC +readline: REC +sdl: REC +shared-mime-info: REC +slang1: REC +slang: REC +startup-notification: ADD +svgalib: REC +t1lib: REC +taglib: REC +wv2: REC +xaw3d: REC +zlib: REC +# This is a Slackware Installation Tagfile. +# +# This one comes from the N (Network/UUCP/Mail/News) series. +# It is used to automate software installation. +# There are two labels that you can use: ADD and SKP. +# +# If the PROMPT option is used during installation, this file will be checked +# to determine the installation default. First, all the lines beginning with +# <package_name>: +# will be extracted. Then, the last line in the extracted segment will be +# checked for the flags ADD, REC, OPT and SKP. +# +# If ADD is found, then a priority of [required] will be displayed, and the +# package will be automatically installed. +# +# If SKP is found, then a priority of [skip] will be displayed, and +# the package will be automatically skipped. +# +# All other packages will be prompted for. There are two optional flags you +# can use to change the package priority level shown when the user is +# prompted: REC and OPT. If REC is found, the priority shown will be +# [recommended], while if OPT is found, the user sees priority [optional]. +# +# If no flags are found for a given package, the user is shown priority +# [unknown], and is prompted for whether the package should be installed. +# +# +apache: OPT +autofs: OPT +bind: REC +bitchx: OPT +bootp: OPT +curl: OPT +cyrus-sasl: REC +dhcp: OPT +dhcpcd: REC +dnsmasq: OPT +elm: OPT +epic4: OPT +fetchmail: OPT +getmail: REC +gnupg: OPT +gnupg2: OPT +imapd: OPT +inetd: REC +iproute2: OPT +iptables: ADD +iptraf: OPT +irssi: OPT +lftp: OPT +links: OPT +lynx: OPT +metamail: REC +mod_ssl: OPT +mutt: OPT +mailx: REC +nc: OPT +ncftp: OPT +netatalk: OPT +netpipes: OPT +newspost: OPT +nfs-utils: OPT +nmap: OPT +nn: OPT +ntp: OPT +openldap-client: REC +openssh: REC +openssl: REC +php: OPT +pidentd: REC +pine: OPT +pinentry: OPT +popa3d: REC +ppp: REC +portmap: REC +procmail: OPT +proftpd: REC +rdesktop: OPT +rdist: OPT +rp-pppoe: OPT +rsync: OPT +samba: OPT +sendmail-cf: OPT +sendmail: REC +slrn: OPT +stunnel: OPT +tcpdump: REC +tcpip: REC +tin: OPT +traceroute: OPT +trn: OPT +uucp: OPT +vsftpd: REC +wget: OPT +whois: OPT +wireless-tools: OPT +yptools: OPT +ytalk: REC +dejavu-ttf: REC +fontconfig: ADD +ttf-indic-fonts: REC +x11: ADD +x11-devel: ADD +x11-docs: REC +x11-docs-html: OPT +x11-fonts-100dpi: OPT +x11-fonts-cyrillic: OPT +x11-fonts-misc: ADD +x11-fonts-scale: ADD +x11-xdmx: OPT +x11-xnest: OPT +x11-xvfb: OPT +blackbox: OPT +fluxbox: OPT +fvwm: OPT +gaim: OPT +gftp: OPT +gimp: REC +gimp-help-2: REC +gkrellm: OPT +gnuchess: REC +gnuplot: OPT +gucharmap: OPT +gv: REC +gxine: OPT +imagemagick: REC +mozilla-firefox: REC +pan: REC +rxvt: REC +sane: OPT +seamonkey: REC +seyon: OPT +vim-gvim: REC +windowmaker: REC +xfm: OPT +x3270: OPT +xchat: OPT +xgames: OPT +xfce: OPT +xfractint: OPT +xine-lib: REC +xine-ui: REC +xmms: OPT +xpaint: OPT +xpdf: OPT +xsane: REC +xlockmore: REC +xscreensaver: REC +xv: REC +# This is a Slackware Installation Tagfile. +# +# This one comes from disk: Y1 (Yaaaaaahhoooo? Games and Amusements). +# +# It is used to automate software installation. +# There are two labels that you can use: ADD and SKP. +# +# If the PROMPT option is used during installation, this file will be checked +# to determine the installation default. First, all the lines beginning with +# <package_name>: +# will be extracted. Then, the last line in the extracted segment will be +# checked for the flags ADD, REC, OPT and SKP. +# +# If ADD is found, then a priority of [required] will be displayed, and the +# package will be automatically installed. +# +# If SKP is found, then a priority of [skip] will be displayed, and +# the package will be automatically skipped. +# +# All other packages will be prompted for. There are two optional flags you +# can use to change the package priority level shown when the user is +# prompted: REC and OPT. If REC is found, the priority shown will be +# [recommended], while if OPT is found, the user sees priority [optional]. +# +# If no flags are found for a given package, the user is shown priority +# [unknown], and is prompted for whether the package should be installed. +bsd-games: OPT +# Tagfile for emacs series +emacs: ADD +emacs-misc: REC +emacs-lisp: OPT +emacs-leim: OPT +emacs-nox: OPT +emacs-info: REC +tetex: ADD +tetex-doc: REC +xfig: OPT +transfig: OPT +# This is a Slackware Installation Tagfile. +# +# This one comes from disk: TCL1 (Tcl/Tk series) +# and a backup copy called "tagfile.org" can be found on the same disk. You +# should never edit the "tagfile.org" copy, only the one called "tagfile". Use +# the "tagfile.org" only if you want to restore original installation defaults +# by copying it over the top of "tagfile". +# +# It is used to automate software installation. +# There are two labels that you can use: ADD and SKP. +# +# If the PROMPT option is used during installation, this file will be checked +# to determine the installation default. First, all the lines beginning with +# <package_name>: +# will be extracted. Then, the last line in the extracted segment will be +# checked for the flags ADD, REC, OPT and SKP. +# +# If ADD is found, then a priority of [required] will be displayed, and the +# package will be automatically installed. +# +# If SKP is found, then a priority of [skip] will be displayed, and +# the package will be automatically skipped. +# +# All other packages will be prompted for. There are two optional flags you +# can use to change the package priority level shown when the user is +# prompted: REC and OPT. If REC is found, the priority shown will be +# [recommended], while if OPT is found, the user sees priority [optional]. +# +# If no flags are found for a given package, the user is shown priority +# [unknown], and is prompted for whether the package should be installed. +# +# If you mess this file up beyond recognition, just restore from "tagfile.org" +# +# +expect: OPT +hfsutils: OPT +tcl: ADD +tclx: REC +tk: REC +tix: OPT +amarok: OPT +kdeaccessibility: OPT +kdeaddons: OPT +kdeadmin: ADD +kdeartwork: ADD +kdebase: ADD +kdebindings: OPT +kdeedu: REC +kdegames: REC +kdegraphics: ADD +kdelibs: ADD +kdemultimedia: REC +kdenetwork: REC +kdepim: REC +kdesdk: OPT +kdetoys: REC +kdeutils: ADD +kdevelop: OPT +kdewebdev: OPT +koffice: REC +qca: REC +qca-tls: REC +qt: ADD +# contrib packages section begins here +slacktrack +simplepkg |