diff options
Diffstat (limited to 'templates')
72 files changed, 0 insertions, 10129 deletions
diff --git a/templates/openoffice/openoffice.d/etc/profile.d/lang.csh b/templates/openoffice/openoffice.d/etc/profile.d/lang.csh deleted file mode 100755 index 94e8a92..0000000 --- a/templates/openoffice/openoffice.d/etc/profile.d/lang.csh +++ /dev/null @@ -1,33 +0,0 @@ -#!/bin/csh -# Set the system locale. (no, we don't have a menu for this ;-) -# For a list of locales which are supported by this machine, type: -# locale -a - -# en_US is the Slackware default locale: -setenv LANG pt_BR - -# 'C' is the old Slackware (and UNIX) default, which is 127-bit -# ASCII with a charmap setting of ANSI_X3.4-1968. These days, -# it's better to use en_US or another modern $LANG setting to -# support extended character sets. -#setenv LANG C - -# There is also support for UTF-8 locales, but be aware that -# some programs are not yet able to handle UTF-8 and will fail to -# run properly. In those cases, you can set LANG=C before -# starting them. Still, I'd avoid UTF unless you actually need it. -#setenv LANG en_US.UTF-8 - -# Another option for en_US: -#setenv LANG en_US.ISO8859-1 - -# One side effect of the newer locales is that the sort order -# is no longer according to ASCII values, so the sort order will -# change in many places. Since this isn't usually expected and -# can break scripts, we'll stick with traditional ASCII sorting. -# If you'd prefer the sort algorithm that goes with your $LANG -# setting, comment this out. -setenv LC_COLLATE C - -# End of /etc/profile.d/lang.csh - diff --git a/templates/openoffice/openoffice.d/etc/profile.d/lang.sh b/templates/openoffice/openoffice.d/etc/profile.d/lang.sh deleted file mode 100755 index c9cde20..0000000 --- a/templates/openoffice/openoffice.d/etc/profile.d/lang.sh +++ /dev/null @@ -1,33 +0,0 @@ -#!/bin/sh -# Set the system locale. (no, we don't have a menu for this ;-) -# For a list of locales which are supported by this machine, type: -# locale -a - -# en_US is the Slackware default locale: -export LANG=pt_BR - -# 'C' is the old Slackware (and UNIX) default, which is 127-bit -# ASCII with a charmap setting of ANSI_X3.4-1968. These days, -# it's better to use en_US or another modern $LANG setting to -# support extended character sets. -#export LANG=C - -# There is also support for UTF-8 locales, but be aware that -# some programs are not yet able to handle UTF-8 and will fail to -# run properly. In those cases, you can set LANG=C before -# starting them. Still, I'd avoid UTF unless you actually need it. -#export LANG=en_US.UTF-8 - -# Another option for en_US: -#export LANG=en_US.ISO8859-1 - -# One side effect of the newer locales is that the sort order -# is no longer according to ASCII values, so the sort order will -# change in many places. Since this isn't usually expected and -# can break scripts, we'll stick with traditional ASCII sorting. -# If you'd prefer the sort algorithm that goes with your $LANG -# setting, comment this out. -export LC_COLLATE=C - -# End of /etc/profile.d/lang.sh - diff --git a/templates/openoffice/openoffice.d/opt/OpenOffice.org b/templates/openoffice/openoffice.d/opt/OpenOffice.org deleted file mode 120000 index 7146afd..0000000 --- a/templates/openoffice/openoffice.d/opt/OpenOffice.org +++ /dev/null @@ -1 +0,0 @@ -../opt2/OpenOffice.org
\ No newline at end of file diff --git a/templates/openoffice/openoffice.s/post-install.sh b/templates/openoffice/openoffice.s/post-install.sh deleted file mode 100755 index 086c7a4..0000000 --- a/templates/openoffice/openoffice.s/post-install.sh +++ /dev/null @@ -1,22 +0,0 @@ -#!/bin/bash - -if [ -z "$2" ]; then - echo "usage: `basename $0` <jail-root> <jail-name>" - exit 1 -elif [ ! -d "$1/$2" ]; then - echo "folder $1/$2 does not exist" - exit 1 -fi - -echo running post-installation script for $1/$2 jail... - -# copia de arquivos -cp -p /etc/passwd $1/$2/etc/ -cp -p /etc/group $1/$2/etc/ -cp /etc/localtime $1/$2/etc/ - -# pos-instalacao -mount -t proc proc $1/$2/proc -chroot $1/$2 /sbin/ldconfig -cd $1/$2 && exec ./var/log/scripts/glibc-zoneinfo-* -umount $1/$2/proc diff --git a/templates/openoffice/openoffice.template b/templates/openoffice/openoffice.template deleted file mode 100644 index ef3ae52..0000000 --- a/templates/openoffice/openoffice.template +++ /dev/null @@ -1,60 +0,0 @@ -aaa_base: ADD -aaa_elflibs: ADD -acpid: REC -bash: ADD -bin: ADD -bzip2: ADD -coreutils: ADD -cups: REC -cxxlibs: ADD -devs: ADD -etc: ADD -a2ps -bc -enscript -espgs -etc -findutils -gawk -gettext -getty-ps -gimp-print -glibc -glibc-i18n -glibc-profile -glibc-solibs -glibc-zoneinfo -grep -gzip -hpijs -infozip -ispell -kbd -kde-i18n-pt_BR -kdebase -kdelibs -koffice-i18n-pt_BR -less -libart_lgpl -libidn -libmng -pkgtools -qt -sed -shadow -sudo -sysklogd -sysvinit -utempter -util-linux -x11 -x11-devel -x11-fonts-100dpi -x11-fonts-cyrillic -x11-fonts-misc -x11-fonts-scale -x11-xdmx -x11-xnest -x11-xvfb -openoffice-chroot -openssl diff --git a/templates/slackware/slackware.template b/templates/slackware/slackware.template deleted file mode 100644 index c3590c1..0000000 --- a/templates/slackware/slackware.template +++ /dev/null @@ -1,566 +0,0 @@ -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: A1 (Base Linux series) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -aaa_base: ADD -aaa_elflibs: ADD -acpid: REC -apmd: REC -bash: ADD -bin: ADD -bzip2: ADD -coreutils: ADD -cpio: ADD -cups: REC -cxxlibs: ADD -dcron: ADD -devs: ADD -e2fsprogs: ADD -elvis: ADD -etc: ADD -findutils: ADD -floppy: ADD -gawk: ADD -genpower: OPT -gettext: REC -getty-ps: OPT -glibc-solibs: ADD -glibc-zoneinfo: ADD -gpm: REC -grep: ADD -gzip: ADD -hdparm: ADD -hotplug: ADD -infozip: ADD -isapnptools: OPT -jfsutils: OPT -kbd: REC -kernel-ide: REC -kernel-modules: ADD -less: ADD -lilo: ADD -loadlin: REC -logrotate: ADD -minicom: REC -mkinitrd: REC -module-init-tools: ADD -openssl-solibs: ADD -pciutils: OPT -pcmcia-cs: REC -pkgtools: ADD -procps: ADD -reiserfsprogs: ADD -sed: ADD -shadow: ADD -slocate: ADD -smartmontools: ADD -sysklogd: ADD -syslinux: ADD -sysvinit: ADD -tar: ADD -tcsh: REC -udev: ADD -umsdos-progs: ADD -usbutils: ADD -utempter: REC -util-linux: ADD -xfsprogs: OPT -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: AP1 (Applications series) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -a2ps: REC -acct: OPT -alsa-utils: REC -amp: OPT -ash: OPT -at: OPT -aumix: OPT -bc: OPT -bpe: OPT -cdparanoia: OPT -cdrdao: OPT -cdrtools: OPT -diffutils: REC -dvd+rw-tools: OPT -enscript: OPT -espgs: REC -flac: OPT -gimp-print: OPT -groff: ADD -gnu-gs-fonts: REC -hpijs: REC -ispell: OPT -jed: OPT -joe: OPT -jove: OPT -ksh93: OPT -lsof: OPT -lvm: OPT -madplay: OPT -man: ADD -man-pages: REC -mc: OPT -mdadm: OPT -most: OPT -mpg321: OPT -mt-st: OPT -mysql: OPT -normalize: OPT -quota: OPT -raidtools: OPT -rexima: REC -rpm: OPT -rzip: OPT -sc: OPT -screen: OPT -seejpeg: REC -sgml-tools: REC -sox: REC -sudo: OPT -texinfo: REC -vim: OPT -vorbis-tools: OPT -workbone: OPT -zsh: OPT - -autoconf: OPT -automake: OPT -bin86: ADD -binutils: ADD -bison: ADD -byacc: OPT -ccache: OPT -clisp: OPT -cscope: OPT -cvs: REC -distcc: OPT -doxygen: OPT -flex: ADD -gcc: ADD -gcc-g++: REC -gcc-g77: OPT -gcc-gnat: OPT -gcc-java: OPT -gcc-objc: OPT -gdb: REC -gettext-tools: REC -guile: OPT -indent: OPT -kernel-headers: ADD -libtool: OPT -m4: REC -make: ADD -nasm: OPT -oprofile: OPT -p2c: OPT -perl: REC -pkgconfig: REC -pmake: REC -python: OPT -python-demo: OPT -python-tools: OPT -rcs: OPT -strace: REC -subversion: OPT -# Tagfile for emacs series -emacs: ADD -emacs-misc: REC -emacs-lisp: OPT -emacs-leim: OPT -emacs-nox: OPT -emacs-info: REC -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: F1 (Frequently Asked Questions) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -linux-faqs: ADD -linux-howtos: ADD -kernel-source: REC -aalib: REC -alsa-driver: ADD -alsa-lib: ADD -alsa-oss: OPT -arts: ADD -aspell: REC -aspell-en: REC -atk: REC -audiofile: REC -db3: REC -db31: REC -db4: REC -esound: REC -expat: REC -fribidi: REC -gdbm: REC -gdk-pixbuf: REC -glib: REC -glib2: REC -glibc: REC -glibc-i18n: OPT -glibc-profile: OPT -glut: REC -gmp: REC -gnet: REC -gtk+: REC -gtk+2: REC -imlib: REC -jre: OPT -lcms: REC -lesstif: REC -libao: REC -libart_lgpl: REC -libcaca: OPT -libexif: REC -libglade: REC -libgsf: REC -libgtkhtml: REC -libid3tag: REC -libidl: REC -libidn: REC -libieee1284: REC -libjpeg: REC -libmad: REC -libmikmod: REC -libmng: REC -libogg: REC -libpng: REC -librsvg: REC -libtermcap: REC -libtiff: REC -libungif: REC -libusb: REC -libvorbis: REC -libwmf: REC -libwmf-docs: OPT -libwpd: REC -libxml2: REC -libxslt: REC -mhash: REC -mpeg_lib: OPT -ncurses: REC -netpbm: REC -pango: REC -pcre: REC -pilot-link: REC -popt: REC -readline: REC -sdl: REC -shared-mime-info: REC -slang: REC -startup-notification: ADD -svgalib: REC -t1lib: REC -taglib: REC -wv2: REC -xaw3d: REC -zlib: REC -# This is a Slackware Installation Tagfile. -# -# This one comes from the N (Network/UUCP/Mail/News) series. -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# -apache: OPT -autofs: OPT -bind: REC -bitchx: OPT -bootp: OPT -curl: OPT -cyrus-sasl: REC -dhcp: OPT -dhcpcd: REC -dnsmasq: OPT -elm: OPT -epic4: OPT -fetchmail: OPT -getmail: REC -gnupg: OPT -htdig: OPT -imapd: OPT -inetd: REC -iproute2: OPT -iptables: ADD -iptraf: OPT -irssi: OPT -lftp: OPT -links: OPT -lynx: OPT -metamail: REC -mod_ssl: OPT -mutt: OPT -nail: REC -nc: OPT -ncftp: OPT -netatalk: OPT -netpipes: OPT -netwatch: OPT -newspost: OPT -nfs-utils: OPT -nmap: OPT -nn: OPT -ntp: OPT -openssh: REC -openssl: REC -php: OPT -pidentd: REC -pine: OPT -popa3d: REC -portmap: REC -ppp: OPT -procmail: REC -proftpd: OPT -rdist: OPT -rp-pppoe: OPT -rsync: OPT -samba: OPT -sendmail-cf: OPT -sendmail: REC -slrn: OPT -stunnel: OPT -tcpdump: REC -tcpip: REC -tin: OPT -traceroute: OPT -trn: OPT -uucp: OPT -vsftpd: REC -wget: OPT -whois: OPT -wireless-tools: OPT -yptools: OPT -ytalk: OPT -tetex: ADD -tetex-doc: REC -xfig: OPT -transfig: OPT -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: TCL1 (Tcl/Tk series) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -expect: OPT -hfsutils: OPT -tcl: ADD -tk: REC -tclx: REC -tix: OPT -x11: ADD -x11-devel: ADD -x11-docs: REC -x11-docs-html: OPT -x11-fonts-100dpi: OPT -x11-fonts-cyrillic: OPT -x11-fonts-misc: ADD -x11-fonts-scale: ADD -x11-xdmx: OPT -x11-xnest: OPT -x11-xvfb: OPT -abiword: OPT -blackbox: OPT -fluxbox: OPT -fvwm: REC -gaim: OPT -gftp: OPT -gimp: REC -gimp-help-2: REC -gkrellm: OPT -gnuchess: REC -gnuplot: OPT -gucharmap: OPT -gv: REC -gxine: OPT -imagemagick: REC -mozilla: REC -mozilla-firefox: REC -mozilla-thunderbird: REC -pan: REC -rxvt: REC -sane: OPT -seyon: OPT -windowmaker: REC -x3270: OPT -xchat: OPT -xfce: OPT -xfm: OPT -xfractint: OPT -xgames: REC -xine-lib: REC -xine-ui: REC -xpaint: OPT -xpdf: OPT -xmms: OPT -xsane: OPT -xlockmore: REC -xscreensaver: REC -xv: REC -xvim: REC -xxgdb: REC -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: Y1 (Yaaaaaahhoooo? Games and Amusements). -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -bsd-games: OPT - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/apache/httpd.conf b/templates/vserver-legacy/vserver-legacy.d/etc/apache/httpd.conf deleted file mode 100644 index 7b7115d..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/apache/httpd.conf +++ /dev/null @@ -1,1046 +0,0 @@ -## -## httpd.conf -- Apache HTTP server configuration file -## - -# -# Based upon the NCSA server configuration files originally by Rob McCool. -# -# This is the main Apache server configuration file. It contains the -# configuration directives that give the server its instructions. -# See <URL:http://httpd.apache.org/docs/> for detailed information about -# the directives. -# -# Do NOT simply read the instructions in here without understanding -# what they do. They're here only as hints or reminders. If you are unsure -# consult the online docs. You have been warned. -# -# After this file is processed, the server will look for and process -# /etc/apache/srm.conf and then /etc/apache/access.conf -# unless you have overridden these with ResourceConfig and/or -# AccessConfig directives here. -# -# The configuration directives are grouped into three basic sections: -# 1. Directives that control the operation of the Apache server process as a -# whole (the 'global environment'). -# 2. Directives that define the parameters of the 'main' or 'default' server, -# which responds to requests that aren't handled by a virtual host. -# These directives also provide default values for the settings -# of all virtual hosts. -# 3. Settings for virtual hosts, which allow Web requests to be sent to -# different IP addresses or hostnames and have them handled by the -# same Apache server process. -# -# Configuration and logfile names: If the filenames you specify for many -# of the server's control files begin with "/" (or "drive:/" for Win32), the -# server will use that explicit path. If the filenames do *not* begin -# with "/", the value of ServerRoot is prepended -- so "logs/foo.log" -# with ServerRoot set to "/usr/local/apache" will be interpreted by the -# server as "/usr/local/apache/logs/foo.log". -# - -### Section 1: Global Environment -# -# The directives in this section affect the overall operation of Apache, -# such as the number of concurrent requests it can handle or where it -# can find its configuration files. -# - -# -# ServerType is either inetd, or standalone. Inetd mode is only supported on -# Unix platforms. -# -ServerType standalone - -# ServerTokens directive -ServerTokens ProductOnly - -# -# ServerRoot: The top of the directory tree under which the server's -# configuration, error, and log files are kept. -# -# NOTE! If you intend to place this on an NFS (or otherwise network) -# mounted filesystem then please read the LockFile documentation -# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>); -# you will save yourself a lot of trouble. -# -ServerRoot "/usr" - -# -# The LockFile directive sets the path to the lockfile used when Apache -# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or -# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at -# its default value. The main reason for changing it is if the logs -# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL -# DISK. The PID of the main server process is automatically appended to -# the filename. -# -#LockFile /var/run/httpd.lock - -# -# PidFile: The file in which the server should record its process -# identification number when it starts. -# -PidFile /var/run/httpd.pid - -# -# ScoreBoardFile: File used to store internal server process information. -# Not all architectures require this. But if yours does (you'll know because -# this file will be created when you run Apache) then you *must* ensure that -# no two invocations of Apache share the same scoreboard file. -# -ScoreBoardFile /var/run/httpd.scoreboard - -# -# In the standard configuration, the server will process httpd.conf (this -# file, specified by the -f command line option), srm.conf, and access.conf -# in that order. The latter two files are now distributed empty, as it is -# recommended that all directives be kept in a single file for simplicity. -# The commented-out values below are the built-in defaults. You can have the -# server ignore these files altogether by using "/dev/null" (for Unix) or -# "nul" (for Win32) for the arguments to the directives. -# -#ResourceConfig /etc/apache/srm.conf -#AccessConfig /etc/apache/access.conf - -# -# Timeout: The number of seconds before receives and sends time out. -# -Timeout 300 - -# -# KeepAlive: Whether or not to allow persistent connections (more than -# one request per connection). Set to "Off" to deactivate. -# -KeepAlive On - -# -# MaxKeepAliveRequests: The maximum number of requests to allow -# during a persistent connection. Set to 0 to allow an unlimited amount. -# We recommend you leave this number high, for maximum performance. -# -MaxKeepAliveRequests 100 - -# -# KeepAliveTimeout: Number of seconds to wait for the next request from the -# same client on the same connection. -# -KeepAliveTimeout 2 - -# -# Server-pool size regulation. Rather than making you guess how many -# server processes you need, Apache dynamically adapts to the load it -# sees --- that is, it tries to maintain enough server processes to -# handle the current load, plus a few spare servers to handle transient -# load spikes (e.g., multiple simultaneous requests from a single -# Netscape browser). -# -# It does this by periodically checking how many servers are waiting -# for a request. If there are fewer than MinSpareServers, it creates -# a new spare. If there are more than MaxSpareServers, some of the -# spares die off. The default values are probably OK for most sites. -# -MinSpareServers 5 -MaxSpareServers 10 - -# -# Number of servers to start initially --- should be a reasonable ballpark -# figure. -# -StartServers 5 - -# -# Limit on total number of servers running, i.e., limit on the number -# of clients who can simultaneously connect --- if this limit is ever -# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. -# It is intended mainly as a brake to keep a runaway server from taking -# the system with it as it spirals down... -# -MaxClients 150 - -# -# MaxRequestsPerChild: the number of requests each child process is -# allowed to process before the child dies. The child will exit so -# as to avoid problems after prolonged use when Apache (and maybe the -# libraries it uses) leak memory or other resources. On most systems, this -# isn't really needed, but a few (such as Solaris) do have notable leaks -# in the libraries. For these platforms, set to something like 10000 -# or so; a setting of 0 means unlimited. -# -# NOTE: This value does not include keepalive requests after the initial -# request per connection. For example, if a child process handles -# an initial request and 10 subsequent "keptalive" requests, it -# would only count as 1 request towards this limit. -# -MaxRequestsPerChild 0 - -# -# Listen: Allows you to bind Apache to specific IP addresses and/or -# ports, instead of the default. See also the <VirtualHost> -# directive. -# -#Listen 3000 -#Listen 12.34.56.78:80 - -# -# BindAddress: You can support virtual hosts with this option. This directive -# is used to tell the server which IP address to listen to. It can either -# contain "*", an IP address, or a fully qualified Internet domain name. -# See also the <VirtualHost> and Listen directives. -# -#BindAddress * - -# -# Dynamic Shared Object (DSO) Support -# -# To be able to use the functionality of a module which was built as a DSO you -# have to place corresponding `LoadModule' lines at this location so the -# directives contained in it are actually available _before_ they are used. -# Please read the file http://httpd.apache.org/docs/dso.html for more -# details about the DSO mechanism and run `httpd -l' for the list of already -# built-in (statically linked and thus always available) modules in your httpd -# binary. -# -# Note: The order in which modules are loaded is important. Don't change -# the order below without expert advice. -# -# Example: -# LoadModule foo_module libexec/mod_foo.so -LoadModule vhost_alias_module libexec/apache/mod_vhost_alias.so -#LoadModule env_module libexec/apache/mod_env.so -LoadModule define_module libexec/apache/mod_define.so -LoadModule config_log_module libexec/apache/mod_log_config.so -LoadModule mime_magic_module libexec/apache/mod_mime_magic.so -LoadModule mime_module libexec/apache/mod_mime.so -LoadModule negotiation_module libexec/apache/mod_negotiation.so -#LoadModule status_module libexec/apache/mod_status.so -#LoadModule info_module libexec/apache/mod_info.so -LoadModule includes_module libexec/apache/mod_include.so -LoadModule autoindex_module libexec/apache/mod_autoindex.so -LoadModule dir_module libexec/apache/mod_dir.so -LoadModule cgi_module libexec/apache/mod_cgi.so -#LoadModule asis_module libexec/apache/mod_asis.so -#LoadModule imap_module libexec/apache/mod_imap.so -#LoadModule action_module libexec/apache/mod_actions.so -#LoadModule speling_module libexec/apache/mod_speling.so -#LoadModule userdir_module libexec/apache/mod_userdir.so -LoadModule alias_module libexec/apache/mod_alias.so -LoadModule rewrite_module libexec/apache/mod_rewrite.so -LoadModule access_module libexec/apache/mod_access.so -LoadModule auth_module libexec/apache/mod_auth.so -LoadModule anon_auth_module libexec/apache/mod_auth_anon.so -#LoadModule dbm_auth_module libexec/apache/mod_auth_dbm.so -#LoadModule digest_module libexec/apache/mod_digest.so -LoadModule proxy_module libexec/apache/libproxy.so -LoadModule cern_meta_module libexec/apache/mod_cern_meta.so -LoadModule expires_module libexec/apache/mod_expires.so -LoadModule headers_module libexec/apache/mod_headers.so -#LoadModule usertrack_module libexec/apache/mod_usertrack.so -#LoadModule log_forensic_module libexec/apache/mod_log_forensic.so -#LoadModule unique_id_module libexec/apache/mod_unique_id.so -LoadModule setenvif_module libexec/apache/mod_setenvif.so - -# Reconstruction of the complete module list from all available modules -# (static and shared ones) to achieve correct module execution order. -# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO] -ClearModuleList -AddModule mod_vhost_alias.c -#AddModule mod_env.c -AddModule mod_define.c -AddModule mod_log_config.c -AddModule mod_mime_magic.c -AddModule mod_mime.c -AddModule mod_negotiation.c -#AddModule mod_status.c -#AddModule mod_info.c -AddModule mod_include.c -AddModule mod_autoindex.c -AddModule mod_dir.c -AddModule mod_cgi.c -#AddModule mod_asis.c -#AddModule mod_imap.c -#AddModule mod_actions.c -#AddModule mod_speling.c -#AddModule mod_userdir.c -AddModule mod_alias.c -AddModule mod_rewrite.c -AddModule mod_access.c -AddModule mod_auth.c -AddModule mod_auth_anon.c -#AddModule mod_auth_dbm.c -#AddModule mod_digest.c -AddModule mod_proxy.c -AddModule mod_cern_meta.c -AddModule mod_expires.c -AddModule mod_headers.c -#AddModule mod_usertrack.c -#AddModule mod_log_forensic.c -#AddModule mod_unique_id.c -AddModule mod_so.c -AddModule mod_setenvif.c - -# -# ExtendedStatus controls whether Apache will generate "full" status -# information (ExtendedStatus On) or just basic information (ExtendedStatus -# Off) when the "server-status" handler is called. The default is Off. -# -#ExtendedStatus On - -### Section 2: 'Main' server configuration -# -# The directives in this section set up the values used by the 'main' -# server, which responds to any requests that aren't handled by a -# <VirtualHost> definition. These values also provide defaults for -# any <VirtualHost> containers you may define later in the file. -# -# All of these directives may appear inside <VirtualHost> containers, -# in which case these default settings will be overridden for the -# virtual host being defined. -# - -# -# If your ServerType directive (set earlier in the 'Global Environment' -# section) is set to "inetd", the next few directives don't have any -# effect since their settings are defined by the inetd configuration. -# Skip ahead to the ServerAdmin directive. -# - -# -# Port: The port to which the standalone server listens. For -# ports < 1023, you will need httpd to be run as root initially. -# -Port 80 - -# -# If you wish httpd to run as a different user or group, you must run -# httpd as root initially and it will switch. -# -# User/Group: The name (or #number) of the user/group to run httpd as. -# . On SCO (ODT 3) use "User nouser" and "Group nogroup". -# . On HPUX you may not be able to use shared memory as nobody, and the -# suggested workaround is to create a user www and use that user. -# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) -# when the value of (unsigned)Group is above 60000; -# don't use Group "#-1" on these systems! -# -User nobody -Group nobody - -# -# ServerAdmin: Your address, where problems with the server should be -# e-mailed. This address appears on some server-generated pages, such -# as error documents. -# -ServerAdmin root@midas.slackware.lan - -# -# ServerName allows you to set a host name which is sent back to clients for -# your server if it's different than the one the program would get (i.e., use -# "www" instead of the host's real name). -# -# Note: You cannot just invent host names and hope they work. The name you -# define here must be a valid DNS name for your host. If you don't understand -# this, ask your network administrator. -# If your host doesn't have a registered DNS name, enter its IP address here. -# You will have to access it by its address (e.g., http://123.45.67.89/) -# anyway, and this will make redirections work in a sensible way. -# -# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your -# machine always knows itself by this address. If you use Apache strictly for -# local testing and development, you may use 127.0.0.1 as the server name. -# -#ServerName www.example.com - -# -# DocumentRoot: The directory out of which you will serve your -# documents. By default, all requests are taken from this directory, but -# symbolic links and aliases may be used to point to other locations. -# -DocumentRoot "/var/www/htdocs" - -# -# Each directory to which Apache has access, can be configured with respect -# to which services and features are allowed and/or disabled in that -# directory (and its subdirectories). -# -# First, we configure the "default" to be a very restrictive set of -# permissions. -# -<Directory /> - Options FollowSymLinks - AllowOverride None -</Directory> - -# -# Note that from this point forward you must specifically allow -# particular features to be enabled - so if something's not working as -# you might expect, make sure that you have specifically enabled it -# below. -# - -# -# This should be changed to whatever you set DocumentRoot to. -# -<Directory "/var/www/htdocs"> - -# -# This may also be "None", "All", or any combination of "Indexes", -# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". -# -# Note that "MultiViews" must be named *explicitly* --- "Options All" -# doesn't give it to you. -# - Options Indexes FollowSymLinks MultiViews - -# -# This controls which options the .htaccess files in directories can -# override. Can also be "All", or any combination of "Options", "FileInfo", -# "AuthConfig", and "Limit" -# - AllowOverride None - -# -# Controls who can get stuff from this server. -# - Order allow,deny - Allow from all -</Directory> - -# -# UserDir: The name of the directory which is appended onto a user's home -# directory if a ~user request is received. -# -<IfModule mod_userdir.c> - UserDir public_html -</IfModule> - -# -# Control access to UserDir directories. The following is an example -# for a site where these directories are restricted to read-only. -# -#<Directory /home/*/public_html> -# AllowOverride FileInfo AuthConfig Limit -# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec -# <Limit GET POST OPTIONS PROPFIND> -# Order allow,deny -# Allow from all -# </Limit> -# <LimitExcept GET POST OPTIONS PROPFIND> -# Order deny,allow -# Deny from all -# </LimitExcept> -#</Directory> - -# -# DirectoryIndex: Name of the file or files to use as a pre-written HTML -# directory index. Separate multiple entries with spaces. -# -<IfModule mod_dir.c> - DirectoryIndex index.html -</IfModule> - -# -# AccessFileName: The name of the file to look for in each directory -# for access control information. -# -AccessFileName .htaccess - -# -# The following lines prevent .htaccess files from being viewed by -# Web clients. Since .htaccess files often contain authorization -# information, access is disallowed for security reasons. Comment -# these lines out if you want Web visitors to see the contents of -# .htaccess files. If you change the AccessFileName directive above, -# be sure to make the corresponding changes here. -# -# Also, folks tend to use names such as .htpasswd for password -# files, so this will protect those as well. -# -<Files ~ "^\.ht"> - Order allow,deny - Deny from all - Satisfy All -</Files> - -# -# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each -# document that was negotiated on the basis of content. This asks proxy -# servers not to cache the document. Uncommenting the following line disables -# this behavior, and proxies will be allowed to cache the documents. -# -#CacheNegotiatedDocs - -# -# UseCanonicalName: (new for 1.3) With this setting turned on, whenever -# Apache needs to construct a self-referencing URL (a URL that refers back -# to the server the response is coming from) it will use ServerName and -# Port to form a "canonical" name. With this setting off, Apache will -# use the hostname:port that the client supplied, when possible. This -# also affects SERVER_NAME and SERVER_PORT in CGI scripts. -# -UseCanonicalName On - -# -# TypesConfig describes where the mime.types file (or equivalent) is -# to be found. -# -<IfModule mod_mime.c> - TypesConfig /etc/apache/mime.types -</IfModule> - -# -# DefaultType is the default MIME type the server will use for a document -# if it cannot otherwise determine one, such as from filename extensions. -# If your server contains mostly text or HTML documents, "text/plain" is -# a good value. If most of your content is binary, such as applications -# or images, you may want to use "application/octet-stream" instead to -# keep browsers from trying to display binary files as though they are -# text. -# -DefaultType text/plain - -# -# The mod_mime_magic module allows the server to use various hints from the -# contents of the file itself to determine its type. The MIMEMagicFile -# directive tells the module where the hint definitions are located. -# mod_mime_magic is not part of the default server (you have to add -# it yourself with a LoadModule [see the DSO paragraph in the 'Global -# Environment' section], or recompile the server and include mod_mime_magic -# as part of the configuration), so it's enclosed in an <IfModule> container. -# This means that the MIMEMagicFile directive will only be processed if the -# module is part of the server. -# -<IfModule mod_mime_magic.c> - MIMEMagicFile /etc/apache/magic -</IfModule> - -# -# HostnameLookups: Log the names of clients or just their IP addresses -# e.g., www.apache.org (on) or 204.62.129.132 (off). -# The default is off because it'd be overall better for the net if people -# had to knowingly turn this feature on, since enabling it means that -# each client request will result in AT LEAST one lookup request to the -# nameserver. -# -HostnameLookups Off - -# -# ErrorLog: The location of the error log file. -# If you do not specify an ErrorLog directive within a <VirtualHost> -# container, error messages relating to that virtual host will be -# logged here. If you *do* define an error logfile for a <VirtualHost> -# container, that host's errors will be logged there and not here. -# -ErrorLog "| /usr/bin/error-log.sh /var/log/apache/error_log" - -# -# LogLevel: Control the number of messages logged to the error_log. -# Possible values include: debug, info, notice, warn, error, crit, -# alert, emerg. -# -LogLevel warn - -# -# The following directives define some format nicknames for use with -# a CustomLog directive (see below). -# -LogFormat "%l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined -LogFormat "%l %u %t \"%r\" %>s %b" common -LogFormat "%{Referer}i -> %U" referer -LogFormat "%{User-agent}i" agent - -# -# The location and format of the access logfile (Common Logfile Format). -# If you do not define any access logfiles within a <VirtualHost> -# container, they will be logged here. Contrariwise, if you *do* -# define per-<VirtualHost> access logfiles, transactions will be -# logged therein and *not* in this file. -# -CustomLog /var/log/apache/access_log common - -# -# If you would like to have agent and referer logfiles, uncomment the -# following directives. -# -#CustomLog /var/log/apache/referer_log referer -#CustomLog /var/log/apache/agent_log agent - -# -# If you prefer a single logfile with access, agent, and referer information -# (Combined Logfile Format) you can use the following directive. -# -#CustomLog /var/log/apache/access_log combined - -# -# Optionally add a line containing the server version and virtual host -# name to server-generated pages (error documents, FTP directory listings, -# mod_status and mod_info output etc., but not CGI generated documents). -# Set to "EMail" to also include a mailto: link to the ServerAdmin. -# Set to one of: On | Off | EMail -# -ServerSignature Off - -# EBCDIC configuration: -# (only for mainframes using the EBCDIC codeset, currently one of: -# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!! -# The following default configuration assumes that "text files" -# are stored in EBCDIC (so that you can operate on them using the -# normal POSIX tools like grep and sort) while "binary files" are -# stored with identical octets as on an ASCII machine. -# -# The directives are evaluated in configuration file order, with -# the EBCDICConvert directives applied before EBCDICConvertByType. -# -# If you want to have ASCII HTML documents and EBCDIC HTML documents -# at the same time, you can use the file extension to force -# conversion off for the ASCII documents: -# > AddType text/html .ahtml -# > EBCDICConvert Off=InOut .ahtml -# -# EBCDICConvertByType On=InOut text/* message/* multipart/* -# EBCDICConvertByType On=In application/x-www-form-urlencoded -# EBCDICConvertByType On=InOut application/postscript model/vrml -# EBCDICConvertByType Off=InOut */* - - -# -# Aliases: Add here as many aliases as you need (with no limit). The format is -# Alias fakename realname -# -<IfModule mod_alias.c> - - # - # Note that if you include a trailing / on fakename then the server will - # require it to be present in the URL. So "/icons" isn't aliased in this - # example, only "/icons/". If the fakename is slash-terminated, then the - # realname must also be slash terminated, and if the fakename omits the - # trailing slash, the realname must also omit it. - # - Alias /icons/ "/var/www/icons/" - - <Directory "/var/www/icons"> - Options Indexes MultiViews - AllowOverride None - Order allow,deny - Allow from all - </Directory> - - # This Alias will project the on-line documentation tree under /manual/ - # even if you change the DocumentRoot. Comment it if you don't want to - # provide access to the on-line documentation. - # - Alias /manual/ "/var/www/htdocs/manual/" - - <Directory "/var/www/htdocs/manual"> - Options Indexes FollowSymlinks MultiViews - AllowOverride None - Order allow,deny - Allow from all - </Directory> - - # - # ScriptAlias: This controls which directories contain server scripts. - # ScriptAliases are essentially the same as Aliases, except that - # documents in the realname directory are treated as applications and - # run by the server when requested rather than as documents sent to the client. - # The same rules about trailing "/" apply to ScriptAlias directives as to - # Alias. - # - ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" - - # - # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased - # CGI directory exists, if you have that configured. - # - <Directory "/var/www/cgi-bin"> - AllowOverride None - Options None - Order allow,deny - Allow from all - </Directory> - -</IfModule> -# End of aliases. - -# -# Redirect allows you to tell clients about documents which used to exist in -# your server's namespace, but do not anymore. This allows you to tell the -# clients where to look for the relocated document. -# Format: Redirect old-URI new-URL -# - -# -# Directives controlling the display of server-generated directory listings. -# -<IfModule mod_autoindex.c> - - # - # FancyIndexing is whether you want fancy directory indexing or standard - # - IndexOptions FancyIndexing - - # - # AddIcon* directives tell the server which icon to show for different - # files or filename extensions. These are only displayed for - # FancyIndexed directories. - # - AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip - - AddIconByType (TXT,/icons/text.gif) text/* - AddIconByType (IMG,/icons/image2.gif) image/* - AddIconByType (SND,/icons/sound2.gif) audio/* - AddIconByType (VID,/icons/movie.gif) video/* - - AddIcon /icons/binary.gif .bin .exe - AddIcon /icons/binhex.gif .hqx - AddIcon /icons/tar.gif .tar - AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv - AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip - AddIcon /icons/a.gif .ps .ai .eps - AddIcon /icons/layout.gif .html .shtml .htm .pdf - AddIcon /icons/text.gif .txt - AddIcon /icons/c.gif .c - AddIcon /icons/p.gif .pl .py - AddIcon /icons/f.gif .for - AddIcon /icons/dvi.gif .dvi - AddIcon /icons/uuencoded.gif .uu - AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl - AddIcon /icons/tex.gif .tex - AddIcon /icons/bomb.gif core - - AddIcon /icons/back.gif .. - AddIcon /icons/hand.right.gif README - AddIcon /icons/folder.gif ^^DIRECTORY^^ - AddIcon /icons/blank.gif ^^BLANKICON^^ - - # - # DefaultIcon is which icon to show for files which do not have an icon - # explicitly set. - # - DefaultIcon /icons/unknown.gif - - # - # AddDescription allows you to place a short description after a file in - # server-generated indexes. These are only displayed for FancyIndexed - # directories. - # Format: AddDescription "description" filename - # - #AddDescription "GZIP compressed document" .gz - #AddDescription "tar archive" .tar - #AddDescription "GZIP compressed tar archive" .tgz - - # - # ReadmeName is the name of the README file the server will look for by - # default, and append to directory listings. - # - # HeaderName is the name of a file which should be prepended to - # directory indexes. - # - ReadmeName README.html - HeaderName HEADER.html - - # - # IndexIgnore is a set of filenames which directory indexing should ignore - # and not include in the listing. Shell-style wildcarding is permitted. - # - IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t - -</IfModule> -# End of indexing directives. - -# -# Document types. -# -<IfModule mod_mime.c> - - # - # AddLanguage allows you to specify the language of a document. You can - # then use content negotiation to give a browser a file in a language - # it can understand. - # - # Note 1: The suffix does not have to be the same as the language - # keyword --- those with documents in Polish (whose net-standard - # language code is pl) may wish to use "AddLanguage pl .po" to - # avoid the ambiguity with the common suffix for perl scripts. - # - # Note 2: The example entries below illustrate that in quite - # some cases the two character 'Language' abbreviation is not - # identical to the two character 'Country' code for its country, - # E.g. 'Danmark/dk' versus 'Danish/da'. - # - # Note 3: In the case of 'ltz' we violate the RFC by using a three char - # specifier. But there is 'work in progress' to fix this and get - # the reference data for rfc1766 cleaned up. - # - # Danish (da) - Dutch (nl) - English (en) - Estonian (ee) - # French (fr) - German (de) - Greek-Modern (el) - # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn) - # Portugese (pt) - Luxembourgeois* (ltz) - # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs) - # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) - # Russian (ru) - # - AddLanguage da .dk - AddLanguage nl .nl - AddLanguage en .en - AddLanguage et .ee - AddLanguage fr .fr - AddLanguage de .de - AddLanguage el .el - AddLanguage he .he - AddCharset ISO-8859-8 .iso8859-8 - AddLanguage it .it - AddLanguage ja .ja - AddCharset ISO-2022-JP .jis - AddLanguage kr .kr - AddCharset ISO-2022-KR .iso-kr - AddLanguage nn .nn - AddLanguage no .no - AddLanguage pl .po - AddCharset ISO-8859-2 .iso-pl - AddLanguage pt .pt - AddLanguage pt-br .pt-br - AddLanguage ltz .lu - AddLanguage ca .ca - AddLanguage es .es - AddLanguage sv .sv - AddLanguage cs .cz .cs - AddLanguage ru .ru - AddLanguage zh-TW .zh-tw - AddCharset Big5 .Big5 .big5 - AddCharset WINDOWS-1251 .cp-1251 - AddCharset CP866 .cp866 - AddCharset ISO-8859-5 .iso-ru - AddCharset KOI8-R .koi8-r - AddCharset UCS-2 .ucs2 - AddCharset UCS-4 .ucs4 - AddCharset UTF-8 .utf8 - - # LanguagePriority allows you to give precedence to some languages - # in case of a tie during content negotiation. - # - # Just list the languages in decreasing order of preference. We have - # more or less alphabetized them here. You probably want to change this. - # - <IfModule mod_negotiation.c> - LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw - </IfModule> - - # - # AddType allows you to tweak mime.types without actually editing it, or to - # make certain files to be certain types. - # - AddType application/x-tar .tgz - - # - # AddEncoding allows you to have certain browsers uncompress - # information on the fly. Note: Not all browsers support this. - # Despite the name similarity, the following Add* directives have nothing - # to do with the FancyIndexing customization directives above. - # - AddEncoding x-compress .Z - AddEncoding x-gzip .gz .tgz - # - # If the AddEncoding directives above are commented-out, then you - # probably should define those extensions to indicate media types: - # - #AddType application/x-compress .Z - #AddType application/x-gzip .gz .tgz - - # - # AddHandler allows you to map certain file extensions to "handlers", - # actions unrelated to filetype. These can be either built into the server - # or added with the Action command (see below) - # - # If you want to use server side includes, or CGI outside - # ScriptAliased directories, uncomment the following lines. - # - # To use CGI scripts: - # - #AddHandler cgi-script .cgi - - # - # To use server-parsed HTML files - # - #AddType text/html .shtml - #AddHandler server-parsed .shtml - - # - # Uncomment the following line to enable Apache's send-asis HTTP file - # feature - # - #AddHandler send-as-is asis - - # - # If you wish to use server-parsed imagemap files, use - # - #AddHandler imap-file map - - # - # To enable type maps, you might want to use - # - #AddHandler type-map var - -</IfModule> -# End of document types. - -# -# Action lets you define media types that will execute a script whenever -# a matching file is called. This eliminates the need for repeated URL -# pathnames for oft-used CGI file processors. -# Format: Action media/type /cgi-script/location -# Format: Action handler-name /cgi-script/location -# - -# -# MetaDir: specifies the name of the directory in which Apache can find -# meta information files. These files contain additional HTTP headers -# to include when sending the document -# -#MetaDir .web - -# -# MetaSuffix: specifies the file name suffix for the file containing the -# meta information. -# -#MetaSuffix .meta - -# -# Customizable error response (Apache style) -# these come in three flavors -# -# 1) plain text -ErrorDocument 500 /missing.html -# n.b. the single leading (") marks it as text, it does not get output -# -# 2) local redirects -ErrorDocument 404 /missing.html -# to redirect to local URL /missing.html -#ErrorDocument 404 /cgi-bin/missing_handler.pl -# N.B.: You can redirect to a script or a document using server-side-includes. -# -# 3) external redirects -ErrorDocument 402 /missing.html -# N.B.: Many of the environment variables associated with the original -# request will *not* be available to such a script. - -# -# Customize behaviour based on the browser -# -<IfModule mod_setenvif.c> - - # - # The following directives modify normal HTTP response behavior. - # The first directive disables keepalive for Netscape 2.x and browsers that - # spoof it. There are known problems with these browser implementations. - # The second directive is for Microsoft Internet Explorer 4.0b2 - # which has a broken HTTP/1.1 implementation and does not properly - # support keepalive when it is used on 301 or 302 (redirect) responses. - # - BrowserMatch "Mozilla/2" nokeepalive - BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 - - # - # The following directive disables HTTP/1.1 responses to browsers which - # are in violation of the HTTP/1.0 spec by not being able to grok a - # basic 1.1 response. - # - BrowserMatch "RealPlayer 4\.0" force-response-1.0 - BrowserMatch "Java/1\.0" force-response-1.0 - BrowserMatch "JDK/1\.0" force-response-1.0 - -</IfModule> -# End of browser customization directives - -# -# Allow server status reports, with the URL of http://servername/server-status -# Change the ".example.com" to match your domain to enable. -# -#<Location /server-status> -# SetHandler server-status -# Order deny,allow -# Deny from all -# Allow from .example.com -#</Location> - -# -# Allow remote server configuration reports, with the URL of -# http://servername/server-info (requires that mod_info.c be loaded). -# Change the ".example.com" to match your domain to enable. -# -#<Location /server-info> -# SetHandler server-info -# Order deny,allow -# Deny from all -# Allow from .example.com -#</Location> - -# -# There have been reports of people trying to abuse an old bug from pre-1.1 -# days. This bug involved a CGI script distributed as a part of Apache. -# By uncommenting these lines you can redirect these attacks to a logging -# script on phf.apache.org. Or, you can record them yourself, using the script -# support/phf_abuse_log.cgi. -# -#<Location /cgi-bin/phf*> -# Deny from all -# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi -#</Location> - -### Section 3: Virtual Hosts -# -# VirtualHost: If you want to maintain multiple domains/hostnames on your -# machine you can setup VirtualHost containers for them. Most configurations -# use only name-based virtual hosts so the server doesn't need to worry about -# IP addresses. This is indicated by the asterisks in the directives below. -# -# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/> -# for further details before you try to setup virtual hosts. -# -# You may use the command line option '-S' to verify your virtual host -# configuration. - -# -# Use name-based virtual hosting. -# -#NameVirtualHost *:80 - -# -# VirtualHost example: -# Almost any Apache directive may go into a VirtualHost container. -# The first VirtualHost section is used for requests without a known -# server name. -# -#<VirtualHost *:80> -# ServerAdmin webmaster@dummy-host.example.com -# DocumentRoot /www/docs/dummy-host.example.com -# ServerName dummy-host.example.com -# ErrorLog logs/dummy-host.example.com-error_log -# CustomLog logs/dummy-host.example.com-access_log common -#</VirtualHost> - -# By default, all external Apache modules are disabled. To enable a particular -# module for Apache, make sure the necessary packages are installed. Then -# uncomment the appropriate Include line below, save the file, and restart -# Apache. Note that some modules may need additional configuration steps. For -# example, mod_ssl requires a site certificate which you may need to generate. -# -# Lastly, if you remove a module package, be sure to edit this file and comment -# out the appropriate Include line. - -# ==> mod_php configuration settings <== -# -# PACKAGES REQUIRED: openssl-solibs (A series) and/or openssl (N series), -# mysql (AP series), gmp (L series), mhash (L series), -# and apache (N series) -# -#Include /etc/apache/mod_php.conf - -# ==> mod_ssl configuration settings <== -# -# PACKAGES REQUIRED: apache (N series) and openssl (N series) -# -#Include /etc/apache/mod_ssl.conf - -#NameVirtualHost VSERVER_IP - -Include /etc/apache/vhosts diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/apache/php.ini b/templates/vserver-legacy/vserver-legacy.d/etc/apache/php.ini deleted file mode 100644 index e6cddef..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/apache/php.ini +++ /dev/null @@ -1,1122 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; -; This is the recommended, PHP 4-style version of the php.ini-dist file. It -; sets some non standard settings, that make PHP more efficient, more secure, -; and encourage cleaner coding. -; The price is that with these settings, PHP may be incompatible with some -; applications, and sometimes, more difficult to develop with. Using this -; file is warmly recommended for production sites. As all of the changes from -; the standard settings are thoroughly documented, you can go over each one, -; and decide whether you want to use it or not. -; -; For general information about the php.ini file, please consult the php.ini-dist -; file, included in your PHP distribution. -; -; This file is different from the php.ini-dist file in the fact that it features -; different values for several directives, in order to improve performance, while -; possibly breaking compatibility with the standard out-of-the-box behavior of -; PHP 3. Please make sure you read what's different, and modify your scripts -; accordingly, if you decide to use this file instead. -; -; - register_globals = Off [Security, Performance] -; Global variables are no longer registered for input data (POST, GET, cookies, -; environment and other server variables). Instead of using $foo, you must use -; you can use $_REQUEST["foo"] (includes any variable that arrives through the -; request, namely, POST, GET and cookie variables), or use one of the specific -; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending -; on where the input originates. Also, you can look at the -; import_request_variables() function. -; Note that register_globals is going to be depracated (i.e., turned off by -; default) in the next version of PHP, because it often leads to security bugs. -; Read http://php.net/manual/en/security.registerglobals.php for further -; information. -; - display_errors = Off [Security] -; With this directive set to off, errors that occur during the execution of -; scripts will no longer be displayed as a part of the script output, and thus, -; will no longer be exposed to remote users. With some errors, the error message -; content may expose information about your script, web server, or database -; server that may be exploitable for hacking. Production sites should have this -; directive set to off. -; - log_errors = On [Security] -; This directive complements the above one. Any errors that occur during the -; execution of your script will be logged (typically, to your server's error log, -; but can be configured in several ways). Along with setting display_errors to off, -; this setup gives you the ability to fully understand what may have gone wrong, -; without exposing any sensitive information to remote users. -; - output_buffering = 4096 [Performance] -; Set a 4KB output buffer. Enabling output buffering typically results in less -; writes, and sometimes less packets sent on the wire, which can often lead to -; better performance. The gain this directive actually yields greatly depends -; on which Web server you're working with, and what kind of scripts you're using. -; - register_argc_argv = Off [Performance] -; Disables registration of the somewhat redundant $argv and $argc global -; variables. -; - magic_quotes_gpc = Off [Performance] -; Input data is no longer escaped with slashes so that it can be sent into -; SQL databases without further manipulation. Instead, you should use the -; function addslashes() on each input element you wish to send to a database. -; - variables_order = "GPCS" [Performance] -; The environment variables are not hashed into the $HTTP_ENV_VARS[]. To access -; environment variables, you can use getenv() instead. -; - error_reporting = E_ALL [Code Cleanliness, Security(?)] -; By default, PHP surpresses errors of type E_NOTICE. These error messages -; are emitted for non-critical errors, but that could be a symptom of a bigger -; problem. Most notably, this will cause error messages about the use -; of uninitialized variables to be displayed. -; - allow_call_time_pass_reference = Off [Code cleanliness] -; It's not possible to decide to force a variable to be passed by reference -; when calling a function. The PHP 4 style to do this is by making the -; function require the relevant argument by reference. - - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -engine = On - -; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized. -; NOTE: Using short tags should be avoided when developing applications or -; libraries that are meant for redistribution, or deployment on PHP -; servers which are not under your control, because short tags may not -; be supported on the target server. For portable, redistributable code, -; be sure not to use short tags. -short_open_tag = On - -; Allow ASP-style <% %> tags. -asp_tags = Off - -; The number of significant digits displayed in floating point numbers. -precision = 14 - -; Enforce year 2000 compliance (will cause problems with non-compliant browsers) -y2k_compliance = On - -; Output buffering allows you to send header lines (including cookies) even -; after you send body content, at the price of slowing PHP's output layer a -; bit. You can enable output buffering during runtime by calling the output -; buffering functions. You can also enable output buffering for all files by -; setting this directive to On. If you wish to limit the size of the buffer -; to a certain size - you can use a maximum number of bytes instead of 'On', as -; a value for this directive (e.g., output_buffering=4096). -output_buffering = 4096 - -; You can redirect all of the output of your scripts to a function. For -; example, if you set output_handler to "mb_output_handler", character -; encoding will be transparently converted to the specified encoding. -; Setting any output handler automatically turns on output buffering. -; Note: People who wrote portable scripts should not depend on this ini -; directive. Instead, explicitly set the output handler using ob_start(). -; Using this ini directive may cause problems unless you know what script -; is doing. -; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" -; and you cannot use both "ob_gzhandler" and "zlib.output_compression". -;output_handler = - -; Transparent output compression using the zlib library -; Valid values for this option are 'off', 'on', or a specific buffer size -; to be used for compression (default is 4KB) -; Note: Resulting chunk size may vary due to nature of compression. PHP -; outputs chunks that are few handreds bytes each as a result of compression. -; If you want larger chunk size for better performence, enable output_buffering -; also. -; Note: output_handler must be empty if this is set 'On' !!!! -; Instead you must use zlib.output_handler. -zlib.output_compression = Off - -; You cannot specify additional output handlers if zlib.output_compression -; is activated here. This setting does the same as output_handler but in -; a different order. -;zlib.output_handler = - -; Implicit flush tells PHP to tell the output layer to flush itself -; automatically after every output block. This is equivalent to calling the -; PHP function flush() after each and every call to print() or echo() and each -; and every HTML block. Turning this option on has serious performance -; implications and is generally recommended for debugging purposes only. -implicit_flush = Off - -; The unserialize callback function will be called (with the undefined class' -; name as parameter), if the unserializer finds an undefined class -; which should be instanciated. -; A warning appears if the specified function is not defined, or if the -; function doesn't include/implement the missing class. -; So only set this entry, if you really want to implement such a -; callback-function. -unserialize_callback_func= - -; When floats & doubles are serialized store serialize_precision significant -; digits after the floating point. The default value ensures that when floats -; are decoded with unserialize, the data will remain the same. -serialize_precision = 100 - -; Whether to enable the ability to force arguments to be passed by reference -; at function call time. This method is deprecated and is likely to be -; unsupported in future versions of PHP/Zend. The encouraged method of -; specifying which arguments should be passed by reference is in the function -; declaration. You're encouraged to try and turn this option Off and make -; sure your scripts work properly with it in order to ensure they will work -; with future versions of the language (you will receive a warning each time -; you use this feature, and the argument will be passed by value instead of by -; reference). -allow_call_time_pass_reference = Off - -; -; Safe Mode -; -safe_mode = Off - -; By default, Safe Mode does a UID compare check when -; opening files. If you want to relax this to a GID compare, -; then turn on safe_mode_gid. -safe_mode_gid = Off - -; When safe_mode is on, UID/GID checks are bypassed when -; including files from this directory and its subdirectories. -; (directory must also be in include_path or full path must -; be used when including) -safe_mode_include_dir = - -; When safe_mode is on, only executables located in the safe_mode_exec_dir -; will be allowed to be executed via the exec family of functions. -safe_mode_exec_dir = - -; Setting certain environment variables may be a potential security breach. -; This directive contains a comma-delimited list of prefixes. In Safe Mode, -; the user may only alter environment variables whose names begin with the -; prefixes supplied here. By default, users will only be able to set -; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). -; -; Note: If this directive is empty, PHP will let the user modify ANY -; environment variable! -safe_mode_allowed_env_vars = PHP_ - -; This directive contains a comma-delimited list of environment variables that -; the end user won't be able to change using putenv(). These variables will be -; protected even if safe_mode_allowed_env_vars is set to allow to change them. -safe_mode_protected_env_vars = LD_LIBRARY_PATH - -; open_basedir, if set, limits all file operations to the defined directory -; and below. This directive makes most sense if used in a per-directory -; or per-virtualhost web server configuration file. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -;open_basedir = - -; This directive allows you to disable certain functions for security reasons. -; It receives a comma-delimited list of function names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -disable_functions = - -; This directive allows you to disable certain classes for security reasons. -; It receives a comma-delimited list of class names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -disable_classes = - -; Colors for Syntax Highlighting mode. Anything that's acceptable in -; <font color="??????"> would work. -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.bg = #FFFFFF -;highlight.default = #0000BB -;highlight.html = #000000 - - -; -; Misc -; -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -expose_php = On - - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -max_execution_time = 30 ; Maximum execution time of each script, in seconds -max_input_time = 60 ; Maximum amount of time each script may spend parsing request data -memory_limit = 8M ; Maximum amount of memory a script may consume (8MB) - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; error_reporting is a bit-field. Or each number up to get desired error -; reporting level -; E_ALL - All errors and warnings -; E_ERROR - fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it's automatically initialized to an -; empty string) -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; -; Examples: -; -; - Show all errors, except for notices -; -;error_reporting = E_ALL & ~E_NOTICE -; -; - Show only errors -; -;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR -; -; - Show all errors -; -error_reporting = E_ALL - -; Print out errors (as a part of the output). For production web sites, -; you're strongly encouraged to turn this feature off, and use error logging -; instead (see below). Keeping display_errors enabled on a production web site -; may reveal security information to end users, such as file paths on your Web -; server, your database schema or other information. -display_errors = Off - -; Even when display_errors is on, errors that occur during PHP's startup -; sequence are not displayed. It's strongly recommended to keep -; display_startup_errors off, except for when debugging. -display_startup_errors = Off - -; Log errors into a log file (server-specific log, stderr, or error_log (below)) -; As stated above, you're strongly advised to use error logging in place of -; error displaying on production web sites. -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line until ignore_repeated_source is set true. -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; sourcelines. -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -report_memleaks = On - -; Store the last error/warning message in $php_errormsg (boolean). -track_errors = Off - -; Disable the inclusion of HTML tags in error messages. -;html_errors = Off - -; If html_errors is set On PHP produces clickable error messages that direct -; to a page describing the error or function causing the error in detail. -; You can download a copy of the PHP manual from http://www.php.net/docs.php -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. -;docref_root = "/phpmanual/" -;docref_ext = .html - -; String to output before an error message. -;error_prepend_string = "<font color=ff0000>" - -; String to output after an error message. -;error_append_string = "</font>" - -; Log errors to specified file. -;error_log = filename - -; Log errors to syslog (Event Log on NT, not valid in Windows 95). -;error_log = syslog - - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; -; -; Note - track_vars is ALWAYS enabled as of PHP 4.0.3 - -; The separator used in PHP generated URLs to separate arguments. -; Default is "&". -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; Default is "&". -; NOTE: Every character in this directive is considered as separator! -;arg_separator.input = ";&" - -; This directive describes the order in which PHP registers GET, POST, Cookie, -; Environment and Built-in variables (G, P, C, E & S respectively, often -; referred to as EGPCS or GPC). Registration is done from left to right, newer -; values override older values. -variables_order = "GPCS" - -; Whether or not to register the EGPCS variables as global variables. You may -; want to turn this off if you don't want to clutter your scripts' global scope -; with user data. This makes most sense when coupled with track_vars - in which -; case you can access all of the GPC variables through the $HTTP_*_VARS[], -; variables. -; -; You should do your best to write your scripts so that they do not require -; register_globals to be on; Using form variables as globals can easily lead -; to possible security problems, if the code is not very well thought of. -register_globals = Off - -; This directive tells PHP whether to declare the argv&argc variables (that -; would contain the GET information). If you don't use these variables, you -; should turn it off for increased performance. -register_argc_argv = Off - -; Maximum size of POST data that PHP will accept. -post_max_size = 8M - -; This directive is deprecated. Use variables_order instead. -gpc_order = "GPC" - -; Magic quotes -; - -; Magic quotes for incoming GET/POST/Cookie data. -magic_quotes_gpc = Off - -; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. -magic_quotes_runtime = Off - -; Use Sybase-style magic quotes (escape ' with '' instead of \'). -magic_quotes_sybase = Off - -; Automatically add files before or after any PHP document. -auto_prepend_file = -auto_append_file = - -; As of 4.0b4, PHP always outputs a character encoding by default in -; the Content-type: header. To disable sending of the charset, simply -; set it to be empty. -; -; PHP's built-in default is text/html -default_mimetype = "text/html" -;default_charset = "iso-8859-1" - -; Always populate the $HTTP_RAW_POST_DATA variable. -;always_populate_raw_post_data = On - - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -;include_path = ".:/php/includes" -; -; Windows: "\path1;\path2" -;include_path = ".;c:\php\includes" - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -doc_root = - -; The directory under which PHP opens the script using /~usernamem used only -; if nonempty. -user_dir = - -; Directory in which the loadable extensions (modules) reside. -; extension_dir = "./" -extension_dir = "/usr/lib/php/extensions/" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -enable_dl = On - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. -; cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; cgi.redirect_status_env = ; - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is zero. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; cgi.fix_pathinfo=1 - -; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; fastcgi.impersonate = 1; - -; Disable logging through FastCGI connection -; fastcgi.log = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If it's set 0 PHP sends Status: header that -; is supported by Apache. When this option is set to 1 PHP will send -; RFC2616 compliant header. -; Default is zero. -;cgi.rfc2616_headers = 0 - - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -upload_max_filesize = 10M - - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -allow_url_fopen = On - -; Define the anonymous ftp password (your email address) -;from="john@doe.com" - -; Define the user agent for php to send -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -default_socket_timeout = 60 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; auto_detect_line_endings = Off - - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; -; -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename.extension -; -; For example, on Windows: -; -; extension=msql.dll -; -; ... or under UNIX: -; -; extension=msql.so -; -; Note that it should be the name of the module only; no directory information -; needs to go here. Specify the location of the extension with the -; extension_dir directive above. -; -; Load the MySQL module by default. Comment this out if you don't use MySQL. -extension=mysql.so - -; Load the gettext extension by default. Comment this out if you don't have the -; gettext shared library installed. -extension=gettext.so - -;Windows Extensions -;Note that MySQL and ODBC support is now built in, so no dll is needed for it. -; -;extension=php_mbstring.dll -;extension=php_bz2.dll -;extension=php_cpdf.dll -;extension=php_crack.dll -;extension=php_curl.dll -;extension=php_db.dll -;extension=php_dba.dll -;extension=php_dbase.dll -;extension=php_dbx.dll -;extension=php_domxml.dll -;extension=php_exif.dll -;extension=php_fdf.dll -;extension=php_filepro.dll -;extension=php_gd2.dll -;extension=php_gettext.dll -;extension=php_hyperwave.dll -;extension=php_iconv.dll -;extension=php_ifx.dll -;extension=php_iisfunc.dll -;extension=php_imap.dll -;extension=php_interbase.dll -;extension=php_java.dll -;extension=php_ldap.dll -;extension=php_mcrypt.dll -;extension=php_mhash.dll -;extension=php_mime_magic.dll -;extension=php_ming.dll -;extension=php_mssql.dll -;extension=php_msql.dll -;extension=php_oci8.dll -;extension=php_openssl.dll -;extension=php_oracle.dll -;extension=php_pdf.dll -;extension=php_pgsql.dll -;extension=php_printer.dll -;extension=php_shmop.dll -;extension=php_snmp.dll -;extension=php_sockets.dll -;extension=php_sybase_ct.dll -;extension=php_w32api.dll -;extension=php_xmlrpc.dll -;extension=php_xslt.dll -;extension=php_yaz.dll -;extension=php_zip.dll - - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[Syslog] -; Whether or not to define the various syslog variables (e.g. $LOG_PID, -; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In -; runtime, you can define these variables by calling define_syslog_variables(). -define_syslog_variables = Off - -[mail function] -; For Win32 only. -SMTP = localhost -smtp_port = 25 - -; For Win32 only. -;sendmail_from = me@example.com - -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -;sendmail_path = - -[Java] -;java.class.path = .\php_java.jar -;java.home = c:\jdk -;java.library = c:\jdk\jre\bin\hotspot\jvm.dll -;java.library.path = .\ - -[SQL] -sql.safe_mode = Off - -[ODBC] -;odbc.default_db = Not yet implemented -;odbc.default_user = Not yet implemented -;odbc.default_pw = Not yet implemented - -; Allow or prevent persistent links. -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of uodbc.defaultlrl and uodbc.defaultbinmode -odbc.defaultbinmode = 1 - -[MySQL] -; Allow or prevent persistent links. -mysql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mysql.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -mysql.max_links = -1 - -; Default port number for mysql_connect(). If unset, mysql_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -mysql.default_port = - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -mysql.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -mysql.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -mysql.default_user = - -; Default password for mysql_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -mysql.default_password = - -; Maximum time (in seconds) for connect timeout. -1 means no limit -mysql.connect_timeout = 60 - -; Trace mode. When trace_mode is active (=On), warnings for table/index scans and -; SQL-Errors will be displayed. -mysql.trace_mode = Off - -[mSQL] -; Allow or prevent persistent links. -msql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -msql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -msql.max_links = -1 - -[PostgresSQL] -; Allow or prevent persistent links. -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Noitce message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -pgsql.log_notice = 0 - -[Sybase] -; Allow or prevent persistent links. -sybase.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -sybase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -sybase.max_links = -1 - -;sybase.interface_file = "/usr/sybase/interfaces" - -; Minimum error severity to display. -sybase.min_error_severity = 10 - -; Minimum message severity to display. -sybase.min_message_severity = 10 - -; Compatability mode with old versions of PHP 3.0. -; If on, this will cause PHP to automatically assign types to results according -; to their Sybase type, instead of treating them all as strings. This -; compatibility mode will probably not stay around forever, so try applying -; whatever necessary changes to your code, and turn it off. -sybase.compatability_mode = Off - -[Sybase-CT] -; Allow or prevent persistent links. -sybct.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -sybct.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -sybct.max_links = -1 - -; Minimum server message severity to display. -sybct.min_server_severity = 10 - -; Minimum client message severity to display. -sybct.min_client_severity = 10 - -[dbx] -; returned column names can be converted for compatibility reasons -; possible values for dbx.colnames_case are -; "unchanged" (default, if not set) -; "lowercase" -; "uppercase" -; the recommended default is either upper- or lowercase, but -; unchanged is currently set for backwards compatibility -dbx.colnames_case = "lowercase" - -[bcmath] -; Number of decimal digits for all bcmath functions. -bcmath.scale = 0 - -[browscap] -;browscap = extra/browscap.ini - -[Informix] -; Default host for ifx_connect() (doesn't apply in safe mode). -ifx.default_host = - -; Default user for ifx_connect() (doesn't apply in safe mode). -ifx.default_user = - -; Default password for ifx_connect() (doesn't apply in safe mode). -ifx.default_password = - -; Allow or prevent persistent links. -ifx.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -ifx.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ifx.max_links = -1 - -; If on, select statements return the contents of a text blob instead of its id. -ifx.textasvarchar = 0 - -; If on, select statements return the contents of a byte blob instead of its id. -ifx.byteasvarchar = 0 - -; Trailing blanks are stripped from fixed-length char columns. May help the -; life of Informix SE users. -ifx.charasvarchar = 0 - -; If on, the contents of text and byte blobs are dumped to a file instead of -; keeping them in memory. -ifx.blobinfile = 0 - -; NULL's are returned as empty strings, unless this is set to 1. In that case, -; NULL's are returned as string 'NULL'. -ifx.nullformat = 0 - -[Session] -; Handler used to store/retrieve data. -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -;session.save_path = /tmp - -; Whether to use cookies. -session.use_cookies = 1 - -; This option enables administrators to make their users invulnerable to -; attacks which involve passing session ids in URLs; defaults to 0. -; session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -session.name = PHPSESSID - -; Initialize session on request startup. -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -session.cookie_path = / - -; The domain for which the cookie is valid. -session.cookie_domain = - -; Handler used to serialize data. php is the standard serializer of PHP. -session.serialize_handler = php - -; Define the probability that the 'garbage collection' process is started -; on every session initialization. -; The probability is calculated by using gc_probability/gc_divisor, -; e.g. 1/100 means there is a 1% chance that the GC process starts -; on each request. - -session.gc_probability = 1 -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -session.gc_maxlifetime = 1440 - -; PHP 4.2 and less have an undocumented feature/bug that allows you to -; to initialize a session variable in the global scope, albeit register_globals -; is disabled. PHP 4.3 and later will warn you, if this feature is used. -; You can disable the feature and the warning separately. At this time, -; the warning is only displayed, if bug_compat_42 is enabled. - -session.bug_compat_42 = 0 -session.bug_compat_warn = 1 - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -session.referer_check = - -; How many bytes to read from the file. -session.entropy_length = 0 - -; Specified here to create the session id. -session.entropy_file = - -;session.entropy_length = 16 - -;session.entropy_file = /dev/urandom - -; Set to {nocache,private,public,} to determine HTTP caching aspects. -; or leave this empty to avoid sending anti-caching headers. -session.cache_limiter = nocache - -; Document expires after n minutes. -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publically accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -session.use_trans_sid = 0 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -; form/fieldset are special; if you include them here, the rewriter will -; add a hidden <input> field with the info which is otherwise appended -; to URLs. If you want XHTML conformity, remove the form entry. -; Note that all valid entries require a "=", even if no value follows. -url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" - -[MSSQL] -; Allow or prevent persistent links. -mssql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mssql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -mssql.max_links = -1 - -; Minimum error severity to display. -mssql.min_error_severity = 10 - -; Minimum message severity to display. -mssql.min_message_severity = 10 - -; Compatability mode with old versions of PHP 3.0. -mssql.compatability_mode = Off - -; Connect timeout -;mssql.connect_timeout = 5 - -; Query timeout -;mssql.timeout = 60 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textlimit = 4096 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textsize = 4096 - -; Limits the number of records in each batch. 0 = all records in one batch. -;mssql.batchsize = 0 - -; Specify how datetime and datetim4 columns are returned -; On => Returns data converted to SQL server settings -; Off => Returns values as YYYY-MM-DD hh:mm:ss -;mssql.datetimeconvert = On - -; Use NT authentication when connecting to the server -mssql.secure_connection = Off - -; Specify max number of processes. Default = 25 -;mssql.max_procs = 25 - -[Assertion] -; Assert(expr); active by default. -;assert.active = On - -; Issue a PHP warning for each failed assertion. -;assert.warning = On - -; Don't bail out by default. -;assert.bail = Off - -; User-function to be called if an assertion fails. -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -;assert.quiet_eval = 0 - -[Ingres II] -; Allow or prevent persistent links. -ingres.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -ingres.max_persistent = -1 - -; Maximum number of links, including persistents. -1 means no limit. -ingres.max_links = -1 - -; Default database (format: [node_id::]dbname[/srv_class]). -ingres.default_database = - -; Default user. -ingres.default_user = - -; Default password. -ingres.default_password = - -[Verisign Payflow Pro] -; Default Payflow Pro server. -pfpro.defaulthost = "test-payflow.verisign.com" - -; Default port to connect to. -pfpro.defaultport = 443 - -; Default timeout in seconds. -pfpro.defaulttimeout = 30 - -; Default proxy IP address (if required). -;pfpro.proxyaddress = - -; Default proxy port. -;pfpro.proxyport = - -; Default proxy logon. -;pfpro.proxylogon = - -; Default proxy password. -;pfpro.proxypassword = - -[com] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -;com.typelib_file = -; allow Distributed-COM calls -;com.allow_dcom = true -; autoregister constants of a components typlib on com_load() -;com.autoregister_typelib = true -; register constants casesensitive -;com.autoregister_casesensitive = false -; show warnings on duplicate constat registrations -;com.autoregister_verbose = true - -[Printer] -;printer.default_printer = "" - -[mbstring] -; language for internal character representation. -;mbstring.language = Japanese - -; internal/script encoding. -; Some encoding cannot work as internal encoding. -; (e.g. SJIS, BIG5, ISO-2022-*) -;mbstring.internal_encoding = EUC-JP - -; http input encoding. -;mbstring.http_input = auto - -; http output encoding. mb_output_handler must be -; registered as output buffer to function -;mbstring.http_output = SJIS - -; enable automatic encoding translation accoding to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; auto means -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -;mbstring.substitute_character = none; - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -;mbstring.func_overload = 0 - -[FrontBase] -;fbsql.allow_persistent = On -;fbsql.autocommit = On -;fbsql.default_database = -;fbsql.default_database_password = -;fbsql.default_host = -;fbsql.default_password = -;fbsql.default_user = "_SYSTEM" -;fbsql.generate_warnings = Off -;fbsql.max_connections = 128 -;fbsql.max_links = 128 -;fbsql.max_persistent = -1 -;fbsql.max_results = 128 -;fbsql.batchSize = 1000 - -[Crack] -; Modify the setting below to match the directory location of the cracklib -; dictionary files. Include the base filename, but not the file extension. -; crack.default_dictionary = "c:\php\lib\cracklib_dict" - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -;exif.encode_unicode = ISO-8859-15 -;exif.decode_unicode_motorola = UCS-2BE -;exif.decode_unicode_intel = UCS-2LE -;exif.encode_jis = -;exif.decode_jis_motorola = JIS -;exif.decode_jis_intel = JIS - -; Local Variables: -; tab-width: 4 -; End: diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/apache/vhosts b/templates/vserver-legacy/vserver-legacy.d/etc/apache/vhosts deleted file mode 100644 index e69de29..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/apache/vhosts +++ /dev/null diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/hosts b/templates/vserver-legacy/vserver-legacy.d/etc/hosts deleted file mode 100644 index 6e33147..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/hosts +++ /dev/null @@ -1,21 +0,0 @@ -# -# hosts This file describes a number of hostname-to-address -# mappings for the TCP/IP subsystem. It is mostly -# used at boot time, when no name servers are running. -# On small systems, this file can be used instead of a -# "named" name server. Just add the names, addresses -# and any aliases to this file... -# -# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1 -# should NEVER be named with the name of the machine. It causes problems -# for some (stupid) programs, irc and reputedly talk. :^) -# - -# For loopbacking. -127.0.0.1 localhost -# This next entry is technically wrong, but good enough to get TCP/IP apps -# to quit complaining that they can't verify the hostname on a loopback-only -# Linux box. -127.0.0.1 darkstar.example.net darkstar - -# End of hosts. diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/logrotate.d/apache b/templates/vserver-legacy/vserver-legacy.d/etc/logrotate.d/apache deleted file mode 100644 index f31fbe2..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/logrotate.d/apache +++ /dev/null @@ -1,11 +0,0 @@ -/var/log/apache/access_log /var/log/apache/error_log { - monthly - nomail - compress - create 0664 root root - rotate 12 - postrotate - /etc/rc.d/rc.httpd restart > /dev/null - endscript -} - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/profile b/templates/vserver-legacy/vserver-legacy.d/etc/profile deleted file mode 100644 index 563594a..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/profile +++ /dev/null @@ -1,87 +0,0 @@ -# /etc/profile: This file contains system-wide defaults used by -# all Bourne (and related) shells. - -# Set the values for some environment variables: -export MINICOM="-c on" -export MANPATH=/usr/local/man:/usr/man:/usr/X11R6/man -export HOSTNAME="`cat /etc/HOSTNAME`" -export LESSOPEN="|lesspipe.sh %s" -export LESS="-M" - -# If the user doesn't have a .inputrc, use the one in /etc. -if [ ! -r "$HOME/.inputrc" ]; then - export INPUTRC=/etc/inputrc -fi - -# Set the default system $PATH: -PATH="/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/games" - -# For root users, ensure that /usr/local/sbin, /usr/sbin, and /sbin are in -# the $PATH. Some means of connection don't add these by default (sshd comes -# to mind). -if [ "`id -u`" = "0" ]; then - echo $PATH | grep /usr/local/sbin 1> /dev/null 2> /dev/null - if [ ! $? = 0 ]; then - PATH=/usr/local/sbin:/usr/sbin:/sbin:$PATH - fi -fi - -# I had problems using 'eval tset' instead of 'TERM=', but you might want to -# try it anyway. I think with the right /etc/termcap it would work great. -# eval `tset -sQ "$TERM"` -if [ "$TERM" = "" -o "$TERM" = "unknown" ]; then - TERM=linux -fi - -# Set ksh93 visual editing mode: -if [ "$SHELL" = "/bin/ksh" ]; then - VISUAL=emacs -# VISUAL=gmacs -# VISUAL=vi -fi - -# Set a default shell prompt: -#PS1='`hostname`:`pwd`# ' -if [ "$SHELL" = "/bin/pdksh" ]; then - PS1='! $ ' -elif [ "$SHELL" = "/bin/ksh" ]; then - PS1='! ${PWD/#$HOME/~}$ ' -elif [ "$SHELL" = "/bin/zsh" ]; then - PS1='%n@%m:%~%# ' -elif [ "$SHELL" = "/bin/ash" ]; then - PS1='$ ' -else - PS1='\u@\h:\w\$ ' -fi -PS2='> ' -export PATH DISPLAY LESS TERM PS1 PS2 - -# Default umask. A umask of 022 prevents new files from being created group -# and world writable. -umask 022 - -# Set up the LS_COLORS and LS_OPTIONS environment variables for color ls: -if [ "$SHELL" = "/bin/zsh" ]; then - eval `dircolors -z` -elif [ "$SHELL" = "/bin/ash" ]; then - eval `dircolors -s` -else - eval `dircolors -b` -fi - -# Append any additional sh scripts found in /etc/profile.d/: -for profile_script in /etc/profile.d/*.sh ; do - if [ -x $profile_script ]; then - . $profile_script - fi -done -unset profile_script - -# For non-root users, add the current directory to the search path: -if [ ! "`id -u`" = "0" ]; then - PATH="$PATH:." -fi - -# firewall: -export FTP_PASSIVE=1 - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.0 b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.0 deleted file mode 100755 index bfec90a..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.0 +++ /dev/null @@ -1,110 +0,0 @@ -#! /bin/sh -# -# rc.6 This file is executed by init when it goes into runlevel -# 0 (halt) or runlevel 6 (reboot). It kills all processes, -# unmounts file systems and then either halts or reboots. -# -# Version: @(#)/etc/rc.d/rc.6 2.47 Sat Jan 13 13:37:26 PST 2001 -# -# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org> -# Modified by: Patrick J. Volkerding, <volkerdi@slackware.com> -# - -# Set the path. -PATH=/sbin:/etc:/bin:/usr/bin - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Set linefeed mode to avoid staircase effect. -stty onlcr - -echo "Running shutdown script $0:" - -# Find out how we were called. -case "$0" in - *0) - command="halt" - ;; - *6) - command=reboot - ;; - *) - echo "$0: call me as \"rc.0\" or \"rc.6\" please!" - exit 1 - ;; -esac - -# Stop the Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - /etc/rc.d/rc.httpd stop -fi - -# Stop the MySQL database: -if [ -r /var/run/mysql/mysql.pid ]; then - . /etc/rc.d/rc.mysqld stop -fi - -# Stop the Samba server: -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba stop -fi - -# Try to kill dhcpcd so the DHCP leases can be returned: -killall -15 dhcpcd 1> /dev/null 2> /dev/null - -# Try to shut down pppd: -PS="$(ps ax)" -if echo "$PS" | grep -q -w pppd ; then - if [ -x /usr/sbin/ppp-off ]; then - /usr/sbin/ppp-off - fi -fi - -# Turn off process accounting: -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - echo "Turning off process accounting." - /sbin/accton -fi - -# Kill all processes. -# INIT is supposed to handle this entirely now, but this didn't always -# work correctly without this second pass at killing off the processes. -# Since INIT already notified the user that processes were being killed, -# we'll avoid echoing this info this time around. -if [ "$1" != "fast" ]; then # shutdown did not already kill all processes - killall5 -15 - sleep 5 - killall5 -9 -fi - -# Carry a random seed between reboots. -echo "Saving random seed from /dev/urandom in /etc/random-seed." -# Use the pool size from /proc, or 512 bytes: -if [ -r /proc/sys/kernel/random/poolsize ]; then - dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null -else - dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null -fi -chmod 600 /etc/random-seed - -# Before unmounting file systems write a reboot or halt record to wtmp. -$command -w - -# Clear /var/lock/subsys. -if [ -d /var/lock/subsys ]; then - rm -f /var/lock/subsys/* -fi - -# This never hurts: -sync - -# sleep 1 fixes problems with some hard drives that don't -# otherwise finish syncing before reboot or poweroff -sleep 1 - -# This is to ensure all processes have completed on SMP machines: -wait - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.4 b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.4 deleted file mode 100644 index b972052..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.4 +++ /dev/null @@ -1,256 +0,0 @@ -#!/bin/sh -# -# rc.M This file is executed by init(8) when the system is being -# initialized for one of the "multi user" run levels (i.e. -# levels 1 through 6). It usually does mounting of file -# systems et al. -# -# Version: @(#)/etc/rc.d/rc.M 2.23 Wed Feb 26 19:20:58 PST 2003 -# -# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> -# Heavily modified by Patrick Volkerding <volkerdi@slackware.com> -# - -# Tell the viewers what's going to happen. -echo "Going multiuser..." - -# Screen blanks after 15 minutes idle time, and powers down in one hour -# if the kernel supports APM or ACPI power management: -#/bin/setterm -blank 15 -powersave powerdown -powerdown 60 - -# Set the hostname. -#if [ -r /etc/HOSTNAME ]; then -# /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .) -#else - # fall back on this old default: -# echo "darkstar.example.net" > /etc/HOSTNAME -# /bin/hostname darkstar -#fi - -# Save the contents of 'dmesg': -#/bin/dmesg -s 65536 > /var/log/dmesg - -# Start the system logger. -if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then - . /etc/rc.d/rc.syslog start -fi - -# Initialize PCMCIA devices: -# -# NOTE: This used to be started near the top of rc.S so that PCMCIA devices -# could be fsck'ed along with the other drives. This had some unfortunate -# side effects, however, since root isn't yet read-write, and /var might not -# even be mounted the .pid files can't be correctly written in /var/run and -# the pcmcia system can't be correctly shut down. If you want some PCMCIA -# partition to be mounted at boot (or when the card is inserted) then add -# the appropriate lines to /etc/pcmcia/scsi.opts. -# -if [ -x /etc/rc.d/rc.pcmcia ] ; then - . /etc/rc.d/rc.pcmcia start - # The cards might need a little extra time here to initialize. - if [ -r /var/run/cardmgr.pid ]; then - sleep 5 - fi -fi - -# Initialize the networking hardware. If your network driver is a module -# and you haven't loaded it manually, this will be deferred until after -# the hotplug system loads the module below. -#if [ -x /etc/rc.d/rc.inet1 ]; then -# . /etc/rc.d/rc.inet1 -#fi - -# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices: -if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then - # Don't run hotplug if 'nohotplug' was given at boot. - if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then - echo "Activating hardware detection: /etc/rc.d/rc.hotplug start" - . /etc/rc.d/rc.hotplug start - fi -fi - -# Start networking daemons: -if [ -x /etc/rc.d/rc.inet2 ]; then - . /etc/rc.d/rc.inet2 -fi - -# Remove stale locks and junk files (must be done after mount -a!) -/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null - -# Remove stale hunt sockets so the game can start. -if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then - echo "Removing your stale hunt sockets from /tmp." - /bin/rm -f /tmp/hunt* -fi - -# Ensure basic filesystem permissions sanity. -chmod 755 / 2> /dev/null -chmod 1777 /tmp /var/tmp - -# Update all the shared library links: -if [ -x /sbin/ldconfig ]; then - echo "Updating shared library links: /sbin/ldconfig" - /sbin/ldconfig -fi - -# Update the X font indexes: -if [ -x /usr/X11R6/bin/fc-cache ]; then - echo "Updating X font indexes: /usr/X11R6/bin/fc-cache" - /usr/X11R6/bin/fc-cache -fi - -# Start the print spooling system. This will usually be LPRng (lpd) or CUPS. -if [ -x /etc/rc.d/rc.cups ]; then - # Start CUPS: - /etc/rc.d/rc.cups start -elif [ -x /etc/rc.d/rc.lprng ]; then - # Start LPRng (lpd): - . /etc/rc.d/rc.lprng start -fi - -# Start netatalk. (a file/print server for Macs using Appletalk) -if [ -x /etc/rc.d/rc.atalk ]; then - /etc/rc.d/rc.atalk -fi - -# Start smartd, which monitors the status of S.M.A.R.T. compatible -# hard drives and reports any problems. Note some devices (which aren't -# smart, I guess ;) will hang if probed by smartd, so it's commented out -# by default. -#if [ -x /usr/sbin/smartd ]; then -# /usr/sbin/smartd -#fi - -# Monitor the UPS with genpowerd. -# To use this, uncomment this section and edit your settings in -# /etc/genpowerd.conf (serial device, UPS type, etc). For more information, -# see "man genpowerd" or the extensive documentation in the -# /usr/doc/genpower-1.0.3 directory. -# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want -# support for stopping the UPS's inverter after the machine halts. -#if [ -x /sbin/genpowerd ]; then -# echo "Starting genpowerd daemon..." -# /sbin/genpowerd -#fi - -# Turn on process accounting. To enable process accounting, make sure the -# option for BSD process accounting is enabled in your kernel, and then -# create the file /var/log/pacct (touch /var/log/pacct). By default, process -# accounting is not enabled (since /var/log/pacct does not exist). This is -# because the log file can get VERY large. -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - /sbin/accton /var/log/pacct - chmod 640 /var/log/pacct - echo "Process accounting turned on." -fi - -# Start crond (Dillon's crond): -# If you want cron to actually log activity to /var/log/cron, then change -# -l10 to -l8 to increase the logging level. -if [ -x /usr/sbin/crond ]; then - /usr/sbin/crond -l10 >>/var/log/cron 2>&1 -fi - -# Start atd (manages jobs scheduled with 'at'): -if [ -x /usr/sbin/atd ]; then - /usr/sbin/atd -b 15 -l 1 -fi - -# Slackware-Mini-Quota-HOWTO: -# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to -# the appropriate partitions as listed in /etc/fstab. Here's an example: -# -# /dev/hda2 /home ext3 defaults,usrquota 1 1 -# -# You'll then need to setup initial quota files at the top of the partitions -# to support quota, like this: -# touch /home/aquota.user /home/aquota.group -# chmod 600 /home/aquota.user /home/aquota.group -# -# Then, reboot to activate the system. -# To edit user quotas, use 'edquota'. See 'man edquota'. Also, the -# official Quota Mini-HOWTO has lots of useful information. That can be found -# here: /usr/doc/Linux-HOWTOs/Quota - -# Check quotas and then turn quota system on: -if grep -q quota /etc/fstab ; then - if [ -x /sbin/quotacheck ]; then - echo "Checking filesystem quotas: /sbin/quotacheck -avugm" - /sbin/quotacheck -avugm - fi - if [ -x /sbin/quotaon ]; then - echo "Activating filesystem quotas: /sbin/quotaon -avug" - /sbin/quotaon -avug - fi -fi - -# Start the sendmail daemon: -if [ -x /etc/rc.d/rc.sendmail ]; then - . /etc/rc.d/rc.sendmail start -fi - -# Start the APM daemon if APM is enabled in the kernel: -if [ -x /usr/sbin/apmd ]; then - if cat /proc/apm 1> /dev/null 2> /dev/null ; then - echo "Starting APM daemon: /usr/sbin/apmd" - /usr/sbin/apmd - fi -fi - -# Start the ACPI (Advanced Configuration and Power Interface) daemon: -if [ -x /etc/rc.d/rc.acpid ]; then - . /etc/rc.d/rc.acpid start -fi - -# Load ALSA (sound) defaults: -if [ -x /etc/rc.d/rc.alsa ]; then - . /etc/rc.d/rc.alsa -fi - -# Load a custom screen font if the user has an rc.font script. -if [ -x /etc/rc.d/rc.font ]; then - . /etc/rc.d/rc.font -fi - -# Load a custom keymap if the user has an rc.keymap script. -if [ -x /etc/rc.d/rc.keymap ]; then - . /etc/rc.d/rc.keymap -fi - -# Initialize HP Officejet support: -if [ -x /etc/rc.d/rc.hpoj ]; then - . /etc/rc.d/rc.hpoj start -fi - -# Start the MySQL database: -if [ -x /etc/rc.d/rc.mysqld ]; then - . /etc/rc.d/rc.mysqld start -fi - -# Start Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - . /etc/rc.d/rc.httpd start -fi - -# Start Samba (a file/print server for Win95/NT machines). -# Samba can be started in /etc/inetd.conf instead. -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba start -fi - -# Start the GPM mouse server: -if [ -x /etc/rc.d/rc.gpm ]; then - . /etc/rc.d/rc.gpm start -fi - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Start the local setup procedure. -if [ -x /etc/rc.d/rc.local ]; then - . /etc/rc.d/rc.local -fi - -# All done. diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.6 b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.6 deleted file mode 100755 index bfec90a..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.6 +++ /dev/null @@ -1,110 +0,0 @@ -#! /bin/sh -# -# rc.6 This file is executed by init when it goes into runlevel -# 0 (halt) or runlevel 6 (reboot). It kills all processes, -# unmounts file systems and then either halts or reboots. -# -# Version: @(#)/etc/rc.d/rc.6 2.47 Sat Jan 13 13:37:26 PST 2001 -# -# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org> -# Modified by: Patrick J. Volkerding, <volkerdi@slackware.com> -# - -# Set the path. -PATH=/sbin:/etc:/bin:/usr/bin - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Set linefeed mode to avoid staircase effect. -stty onlcr - -echo "Running shutdown script $0:" - -# Find out how we were called. -case "$0" in - *0) - command="halt" - ;; - *6) - command=reboot - ;; - *) - echo "$0: call me as \"rc.0\" or \"rc.6\" please!" - exit 1 - ;; -esac - -# Stop the Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - /etc/rc.d/rc.httpd stop -fi - -# Stop the MySQL database: -if [ -r /var/run/mysql/mysql.pid ]; then - . /etc/rc.d/rc.mysqld stop -fi - -# Stop the Samba server: -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba stop -fi - -# Try to kill dhcpcd so the DHCP leases can be returned: -killall -15 dhcpcd 1> /dev/null 2> /dev/null - -# Try to shut down pppd: -PS="$(ps ax)" -if echo "$PS" | grep -q -w pppd ; then - if [ -x /usr/sbin/ppp-off ]; then - /usr/sbin/ppp-off - fi -fi - -# Turn off process accounting: -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - echo "Turning off process accounting." - /sbin/accton -fi - -# Kill all processes. -# INIT is supposed to handle this entirely now, but this didn't always -# work correctly without this second pass at killing off the processes. -# Since INIT already notified the user that processes were being killed, -# we'll avoid echoing this info this time around. -if [ "$1" != "fast" ]; then # shutdown did not already kill all processes - killall5 -15 - sleep 5 - killall5 -9 -fi - -# Carry a random seed between reboots. -echo "Saving random seed from /dev/urandom in /etc/random-seed." -# Use the pool size from /proc, or 512 bytes: -if [ -r /proc/sys/kernel/random/poolsize ]; then - dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null -else - dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null -fi -chmod 600 /etc/random-seed - -# Before unmounting file systems write a reboot or halt record to wtmp. -$command -w - -# Clear /var/lock/subsys. -if [ -d /var/lock/subsys ]; then - rm -f /var/lock/subsys/* -fi - -# This never hurts: -sync - -# sleep 1 fixes problems with some hard drives that don't -# otherwise finish syncing before reboot or poweroff -sleep 1 - -# This is to ensure all processes have completed on SMP machines: -wait - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.K b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.K deleted file mode 100755 index 00a1501..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.K +++ /dev/null @@ -1,88 +0,0 @@ -#! /bin/sh -# -# rc.K This file is executed by init when it goes into runlevel -# 1, which is the administrative state. It kills all -# daemons and then puts the system into single user mode. -# Note that the file systems are kept mounted. -# -# Version: @(#)/etc/rc.d/rc.K 3.1415 Sat Jan 13 13:37:26 PST 2001 -# -# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org> -# Modified by: Patrick J. Volkerding <volkerdi@slackware.com> -# - -# Set the path. -PATH=/sbin:/bin:/usr/bin:/usr/sbin - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Try to turn off quota: -if grep -q quota /etc/fstab ; then - if [ -x /sbin/quotaoff ]; then - echo "Turning off filesystem quotas." - /sbin/quotaoff -a - fi -fi - -# Try to turn off accounting: -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - echo "Turning off accounting." - /sbin/accton -fi - -# Stop the Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - /etc/rc.d/rc.httpd stop -fi - -# Stop the Samba server: -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba stop -fi - -# Shut down the NFS server: -if [ -x /etc/rc.d/rc.nfsd ]; then - /etc/rc.d/rc.nfsd stop -fi - -# Shut down PCMCIA devices: -if [ -x /etc/rc.d/rc.pcmcia ] ; then - . /etc/rc.d/rc.pcmcia stop - # The cards might need a little extra time here to initialize. - sleep 5 -fi - -# Kill all processes. -echo -echo "Sending all processes the SIGHUP signal." -killall5 -1 -echo -n "Waiting for processes to hang up" -for loop in 0 1 2 3 4 5 ; do - sleep 1 - echo -n "." -done -echo -echo "Sending all processes the SIGTERM signal." -killall5 -15 -echo -n "Waiting for processes to terminate" -for loop in 0 1 2 3 4 5 ; do - sleep 1 - echo -n "." -done -echo -echo "Sending all processes the SIGKILL signal." -killall5 -9 -echo -n "Waiting for processes to exit" -for loop in 0 1 2 3 4 5 ; do - sleep 1 - echo -n "." -done -echo - -# Now go to the single user level -echo "Going to single user mode..." -telinit -t 1 1 - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.M b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.M deleted file mode 100755 index 0cb3343..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.M +++ /dev/null @@ -1,256 +0,0 @@ -#!/bin/sh -# -# rc.M This file is executed by init(8) when the system is being -# initialized for one of the "multi user" run levels (i.e. -# levels 1 through 6). It usually does mounting of file -# systems et al. -# -# Version: @(#)/etc/rc.d/rc.M 2.23 Wed Feb 26 19:20:58 PST 2003 -# -# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> -# Heavily modified by Patrick Volkerding <volkerdi@slackware.com> -# - -# Tell the viewers what's going to happen. -echo "Going multiuser..." - -# Screen blanks after 15 minutes idle time, and powers down in one hour -# if the kernel supports APM or ACPI power management: -#/bin/setterm -blank 15 -powersave powerdown -powerdown 60 - -# Set the hostname. -#if [ -r /etc/HOSTNAME ]; then -# /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .) -#else - # fall back on this old default: -# echo "darkstar.example.net" > /etc/HOSTNAME -# /bin/hostname darkstar -#fi - -# Save the contents of 'dmesg': -#/bin/dmesg -s 65536 > /var/log/dmesg - -# Start the system logger. -if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then - . /etc/rc.d/rc.syslog start -fi - -# Initialize PCMCIA devices: -# -# NOTE: This used to be started near the top of rc.S so that PCMCIA devices -# could be fsck'ed along with the other drives. This had some unfortunate -# side effects, however, since root isn't yet read-write, and /var might not -# even be mounted the .pid files can't be correctly written in /var/run and -# the pcmcia system can't be correctly shut down. If you want some PCMCIA -# partition to be mounted at boot (or when the card is inserted) then add -# the appropriate lines to /etc/pcmcia/scsi.opts. -# -if [ -x /etc/rc.d/rc.pcmcia ] ; then - . /etc/rc.d/rc.pcmcia start - # The cards might need a little extra time here to initialize. - if [ -r /var/run/cardmgr.pid ]; then - sleep 5 - fi -fi - -# Initialize the networking hardware. If your network driver is a module -# and you haven't loaded it manually, this will be deferred until after -# the hotplug system loads the module below. -#if [ -x /etc/rc.d/rc.inet1 ]; then -# . /etc/rc.d/rc.inet1 -#fi - -# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices: -if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then - # Don't run hotplug if 'nohotplug' was given at boot. - if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then - echo "Activating hardware detection: /etc/rc.d/rc.hotplug start" - . /etc/rc.d/rc.hotplug start - fi -fi - -# Start networking daemons: -if [ -x /etc/rc.d/rc.inet2 ]; then - . /etc/rc.d/rc.inet2 -fi - -# Remove stale locks and junk files (must be done after mount -a!) -/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null - -# Remove stale hunt sockets so the game can start. -if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then - echo "Removing your stale hunt sockets from /tmp." - /bin/rm -f /tmp/hunt* -fi - -# Ensure basic filesystem permissions sanity. -chmod 755 / 2> /dev/null -chmod 1777 /tmp /var/tmp - -# Update all the shared library links: -if [ -x /sbin/ldconfig ]; then - echo "Updating shared library links: /sbin/ldconfig" - /sbin/ldconfig -fi - -# Update the X font indexes: -if [ -x /usr/X11R6/bin/fc-cache ]; then - echo "Updating X font indexes: /usr/X11R6/bin/fc-cache" - /usr/X11R6/bin/fc-cache -fi - -# Start the print spooling system. This will usually be LPRng (lpd) or CUPS. -if [ -x /etc/rc.d/rc.cups ]; then - # Start CUPS: - /etc/rc.d/rc.cups start -elif [ -x /etc/rc.d/rc.lprng ]; then - # Start LPRng (lpd): - . /etc/rc.d/rc.lprng start -fi - -# Start netatalk. (a file/print server for Macs using Appletalk) -if [ -x /etc/rc.d/rc.atalk ]; then - /etc/rc.d/rc.atalk -fi - -# Start smartd, which monitors the status of S.M.A.R.T. compatible -# hard drives and reports any problems. Note some devices (which aren't -# smart, I guess ;) will hang if probed by smartd, so it's commented out -# by default. -#if [ -x /usr/sbin/smartd ]; then -# /usr/sbin/smartd -#fi - -# Monitor the UPS with genpowerd. -# To use this, uncomment this section and edit your settings in -# /etc/genpowerd.conf (serial device, UPS type, etc). For more information, -# see "man genpowerd" or the extensive documentation in the -# /usr/doc/genpower-1.0.3 directory. -# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want -# support for stopping the UPS's inverter after the machine halts. -#if [ -x /sbin/genpowerd ]; then -# echo "Starting genpowerd daemon..." -# /sbin/genpowerd -#fi - -# Turn on process accounting. To enable process accounting, make sure the -# option for BSD process accounting is enabled in your kernel, and then -# create the file /var/log/pacct (touch /var/log/pacct). By default, process -# accounting is not enabled (since /var/log/pacct does not exist). This is -# because the log file can get VERY large. -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - /sbin/accton /var/log/pacct - chmod 640 /var/log/pacct - echo "Process accounting turned on." -fi - -# Start crond (Dillon's crond): -# If you want cron to actually log activity to /var/log/cron, then change -# -l10 to -l8 to increase the logging level. -if [ -x /usr/sbin/crond ]; then - /usr/sbin/crond -l10 >>/var/log/cron 2>&1 -fi - -# Start atd (manages jobs scheduled with 'at'): -if [ -x /usr/sbin/atd ]; then - /usr/sbin/atd -b 15 -l 1 -fi - -# Slackware-Mini-Quota-HOWTO: -# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to -# the appropriate partitions as listed in /etc/fstab. Here's an example: -# -# /dev/hda2 /home ext3 defaults,usrquota 1 1 -# -# You'll then need to setup initial quota files at the top of the partitions -# to support quota, like this: -# touch /home/aquota.user /home/aquota.group -# chmod 600 /home/aquota.user /home/aquota.group -# -# Then, reboot to activate the system. -# To edit user quotas, use 'edquota'. See 'man edquota'. Also, the -# official Quota Mini-HOWTO has lots of useful information. That can be found -# here: /usr/doc/Linux-HOWTOs/Quota - -# Check quotas and then turn quota system on: -if grep -q quota /etc/fstab ; then - if [ -x /sbin/quotacheck ]; then - echo "Checking filesystem quotas: /sbin/quotacheck -avugm" - /sbin/quotacheck -avugm - fi - if [ -x /sbin/quotaon ]; then - echo "Activating filesystem quotas: /sbin/quotaon -avug" - /sbin/quotaon -avug - fi -fi - -# Start the sendmail daemon: -if [ -x /etc/rc.d/rc.sendmail ]; then - . /etc/rc.d/rc.sendmail start -fi - -# Start the APM daemon if APM is enabled in the kernel: -if [ -x /usr/sbin/apmd ]; then - if cat /proc/apm 1> /dev/null 2> /dev/null ; then - echo "Starting APM daemon: /usr/sbin/apmd" - /usr/sbin/apmd - fi -fi - -# Start the ACPI (Advanced Configuration and Power Interface) daemon: -if [ -x /etc/rc.d/rc.acpid ]; then - . /etc/rc.d/rc.acpid start -fi - -# Load ALSA (sound) defaults: -if [ -x /etc/rc.d/rc.alsa ]; then - . /etc/rc.d/rc.alsa -fi - -# Load a custom screen font if the user has an rc.font script. -if [ -x /etc/rc.d/rc.font ]; then - . /etc/rc.d/rc.font -fi - -# Load a custom keymap if the user has an rc.keymap script. -if [ -x /etc/rc.d/rc.keymap ]; then - . /etc/rc.d/rc.keymap -fi - -# Initialize HP Officejet support: -if [ -x /etc/rc.d/rc.hpoj ]; then - . /etc/rc.d/rc.hpoj start -fi - -# Start the MySQL database: -if [ -x /etc/rc.d/rc.mysqld ]; then - . /etc/rc.d/rc.mysqld start -fi - -# Start Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - . /etc/rc.d/rc.httpd start -fi - -# Start Samba (a file/print server for Win95/NT machines). -# Samba can be started in /etc/inetd.conf instead. -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba start -fi - -# Start the GPM mouse server: -if [ -x /etc/rc.d/rc.gpm ]; then - . /etc/rc.d/rc.gpm start -fi - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Start the local setup procedure. -if [ -x /etc/rc.d/rc.local ]; then - . /etc/rc.d/rc.local -fi - -# All done. diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.S b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.S deleted file mode 100755 index 05c75b4..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.S +++ /dev/null @@ -1,294 +0,0 @@ -#!/bin/sh -# -# /etc/rc.d/rc.S: System initialization script. -# -# Mostly written by: Patrick J. Volkerding, <volkerdi@slackware.com> -# - -PATH=/sbin:/usr/sbin:/bin:/usr/bin - -# Mount /proc right away: -/sbin/mount -v proc /proc -n -t proc - -# If 'nohotplug' was given at boot, or rc.hotplug has been turned off -# (is not executable), then shut off hotplugging in the kernel now. -# Turning off hotplug is *not* recommended, and will break some things. -if [ -w /proc/sys/kernel/hotplug ]; then - if grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then - echo "/dev/null" > /proc/sys/kernel/hotplug - elif [ ! -x /etc/rc.d/rc.hotplug ]; then - echo "/dev/null" > /proc/sys/kernel/hotplug - fi -fi - -# Start devfsd if necessary. On newer kernels, udev should be used instead. -if [ -x /etc/rc.d/rc.devfsd ]; then - /etc/rc.d/rc.devfsd start -fi - -# Mount sysfs next, if the kernel supports it: -if [ -d /sys ]; then - if cat /proc/filesystems | grep -w sysfs 1> /dev/null 2> /dev/null ; then - if ! cat /proc/mounts | grep -w sysfs 1> /dev/null 2> /dev/null ; then - /sbin/mount -v sysfs /sys -n -t sysfs - fi - fi -fi - -# Initialize udev to manage /dev entries for 2.6.x kernels: -if [ -x /etc/rc.d/rc.udev ]; then - if ! grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then - /etc/rc.d/rc.udev - fi -fi - -# Enable swapping: -/sbin/swapon -a - -# Test to see if the root partition is read-only, like it ought to be. -READWRITE=no -if touch /fsrwtestfile 2>/dev/null; then - rm -f /fsrwtestfile - READWRITE=yes -else - echo "Testing root filesystem status: read-only filesystem" -fi - -# See if a forced filesystem check was requested at shutdown: -if [ -r /etc/forcefsck ]; then - FORCEFSCK="-f" -fi - -# Check the root filesystem: -if [ ! $READWRITE = yes ]; then - RETVAL=0 - if [ ! -r /etc/fastboot ]; then - echo "Checking root filesystem:" - /sbin/fsck $FORCEFSCK -C -a / - RETVAL=$? - fi - # An error code of 2 or higher will require a reboot. - if [ $RETVAL -ge 2 ]; then - # An error code equal to or greater than 4 means that some errors - # could not be corrected. This requires manual attention, so we - # offer a chance to try to fix the problem in single-user mode: - if [ $RETVAL -ge 4 ]; then - echo - echo "***********************************************************" - echo "*** An error occurred during the root filesystem check. ***" - echo "*** You will now be given a chance to log into the ***" - echo "*** system in single-user mode to fix the problem. ***" - echo "*** ***" - echo "*** If you are using the ext2 filesystem, running ***" - echo "*** 'e2fsck -v -y <partition>' might help. ***" - echo "***********************************************************" - echo - echo "Once you exit the single-user shell, the system will reboot." - echo - PS1="(Repair filesystem) \#"; export PS1 - sulogin - else # With an error code of 2 or 3, reboot the machine automatically: - echo - echo "***********************************" - echo "*** The filesystem was changed. ***" - echo "*** The system will now reboot. ***" - echo "***********************************" - echo - fi - echo "Unmounting file systems." - /sbin/umount -a -r - /sbin/mount -n -o remount,ro / - echo "Rebooting system." - sleep 2 - reboot -f - fi - # Remount the root filesystem in read-write mode - echo "Remounting root device with read-write enabled." - /sbin/mount -w -v -n -o remount / - if [ $? -gt 0 ] ; then - echo - echo "Attempt to remount root device as read-write failed! This is going to" - echo "cause serious problems." - echo - echo "If you're using the UMSDOS filesystem, you **MUST** mount the root partition" - echo "read-write! You can make sure the root filesystem is getting mounted " - echo "read-write with the 'rw' flag to Loadlin:" - echo - echo "loadlin vmlinuz root=/dev/hda1 rw (replace /dev/hda1 with your root device)" - echo - echo "Normal bootdisks can be made to mount a system read-write with the rdev command:" - echo - echo "rdev -R /dev/fd0 0" - echo - echo "You can also get into your system by using a boot disk with a command like this" - echo "on the LILO prompt line: (change the root partition name as needed)" - echo - echo "LILO: mount root=/dev/hda1 rw" - echo - echo "Please press ENTER to continue, then reboot and use one of the above methods to" - echo -n "get into your machine and start looking for the problem. " - read junk; - fi -else - echo "Testing root filesystem status: read-write filesystem" - if cat /etc/fstab | grep ' / ' | grep umsdos 1> /dev/null 2> /dev/null ; then - ROOTTYPE="umsdos" - fi - if [ ! "$ROOTTYPE" = "umsdos" ]; then # no warn for UMSDOS - echo - echo "*** ERROR: Root partition has already been mounted read-write. Cannot check!" - echo - echo "For filesystem checking to work properly, your system must initially mount" - echo "the root partition as read only. Please modify your kernel with 'rdev' so that" - echo "it does this. If you're booting with LILO, add a line:" - echo - echo " read-only" - echo - echo "to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it." - echo - echo "If you boot from a kernel on a floppy disk, put it in the drive and type:" - echo " rdev -R /dev/fd0 1" - echo - echo "If you boot from a bootdisk, or with Loadlin, you can add the 'ro' flag." - echo - echo "This will fix the problem *AND* eliminate this annoying message. :^)" - echo - echo -n "Press ENTER to continue. " - read junk; - fi -fi # Done checking root filesystem - -# Any /etc/mtab that exists here is old, so we delete it to start over: -/bin/rm -f /etc/mtab* -# Remounting the / partition will initialize the new /etc/mtab: -/sbin/mount -w -o remount / - -# Fix /etc/mtab to list sys and proc if they were not yet entered in -# /etc/mtab because / was still mounted read-only: -if [ -d /proc/sys ]; then - /sbin/mount -f proc /proc -t proc -fi -if [ -d /sys/bus ]; then - /sbin/mount -f sysfs /sys -t sysfs -fi - -# Set the system time from the hardware clock using hwclock --hctosys. -if [ -x /sbin/hwclock ]; then - if grep "^UTC" /etc/hardwareclock 1> /dev/null 2> /dev/null ; then - echo "Setting system time from the hardware clock (UTC)." - /sbin/hwclock --utc --hctosys - else - echo "Setting system time from the hardware clock (localtime)." - /sbin/hwclock --localtime --hctosys - fi -fi - -# Configure ISA Plug-and-Play devices: -if [ -r /etc/isapnp.conf ]; then - if [ -x /sbin/isapnp ]; then - /sbin/isapnp /etc/isapnp.conf - fi -fi - -# This loads any kernel modules that are needed. These might be required to -# use your ethernet card, sound card, or other optional hardware. -if [ -x /etc/rc.d/rc.modules -a -r /proc/modules ]; then - . /etc/rc.d/rc.modules -fi - -# Configure runtime kernel parameters: -if [ -x /sbin/sysctl -a -r /etc/sysctl.conf ]; then - /sbin/sysctl -e -p /etc/sysctl.conf -fi - -# Initialize the Logical Volume Manager. -# This won't start unless we find /etc/lvmtab (LVM1) or -# /etc/lvm/backup/ (LVM2). This is created by /sbin/vgscan, so to -# use LVM you must run /sbin/vgscan yourself the first time (and -# create some VGs and LVs). -if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then - echo "Initializing LVM (Logical Volume Manager):" - # Check for device-mapper support. - if ! cat /proc/devices | grep -w device-mapper 1> /dev/null 2> /dev/null ; then - # If device-mapper exists as a module, try to load it. - if [ -r /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko ]; then - insmod /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko - fi - fi - # Scan for new volume groups: - /sbin/vgscan 2> /dev/null - if [ $? = 0 ]; then - # This needs a moment to register. - sleep 10 - # Make volume groups available to the kernel. - # This should also make logical volumes available. - /sbin/vgchange -ay - # Enable swapping again in case any LVs are used for swap. Ignore previous error. :-) - /sbin/swapon -a - fi -fi - -# Check all the non-root filesystems: -if [ ! -r /etc/fastboot ]; then - echo "Checking non-root filesystems:" - /sbin/fsck $FORCEFSCK -C -R -A -a -fi - -# mount non-root file systems in fstab (but not NFS or SMB -# because TCP/IP is not yet configured, and not proc because -# that has already been mounted): -/sbin/mount -a -v -t nonfs,nosmbfs,noproc - -# Clean up some temporary files: -( cd /var/log/setup/tmp && rm -rf * ) -/bin/rm -f /var/run/utmp /var/run/*pid /etc/nologin /var/run/lpd* \ - /var/run/ppp* /etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot - -# Attempt to umount and remove any leftover /initrd: -if [ -d /initrd ]; then - /sbin/umount /initrd 2> /dev/null - rmdir /initrd 2> /dev/null - blockdev --flushbufs /dev/ram0 2> /dev/null -fi - -# Create a fresh utmp file: -touch /var/run/utmp -chown root.utmp /var/run/utmp -chmod 664 /var/run/utmp - -if [ "$ROOTTYPE" = "umsdos" ]; then # we need to update any files added in DOS: - echo "Synchronizing UMSDOS directory structure:" - echo " /sbin/umssync -r99 -v- /" - /sbin/umssync -r99 -v- / -fi - -# Setup the /etc/motd to reflect the current kernel level: -# THIS WIPES ANY CHANGES YOU MAKE TO /ETC/MOTD WITH EACH BOOT. -# COMMENT THIS OUT IF YOU WANT TO MAKE A CUSTOM VERSION. -echo "$(/bin/uname -sr)." > /etc/motd - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Run serial port setup script: -# (CAREFUL! This can make some systems hang if the rc.serial script isn't -# set up correctly. If this happens, you may have to edit the file from a -# boot disk) -# -# . /etc/rc.d/rc.serial - -# Carry an entropy pool between reboots to improve randomness. -if [ -f /etc/random-seed ]; then - echo "Using /etc/random-seed to initialize /dev/urandom." - cat /etc/random-seed > /dev/urandom -fi -# Use the pool size from /proc, or 512 bytes: -if [ -r /proc/sys/kernel/random/poolsize ]; then - dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null -else - dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null -fi -chmod 600 /etc/random-seed - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.httpd b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.httpd deleted file mode 100644 index 00b8837..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.httpd +++ /dev/null @@ -1,21 +0,0 @@ -#!/bin/sh -# -# /etc/rc.d/rc.httpd -# -# Start/stop/restart the Apache web server. -# -# To make Apache start automatically at boot, make this -# file executable: chmod 755 /etc/rc.d/rc.httpd -# - -case "$1" in - 'start') - /usr/sbin/apachectl start ;; - 'stop') - /usr/sbin/apachectl stop ;; - 'restart') - /usr/sbin/apachectl restart ;; - *) - echo "usage $0 start|stop|restart" ;; -esac - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inet2 b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inet2 deleted file mode 100755 index db56589..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inet2 +++ /dev/null @@ -1,129 +0,0 @@ -#!/bin/sh -# -# rc.inet2 This shell script boots up the entire network system. -# Note, that when this script is used to also fire -# up any important remote NFS disks (like the /usr -# directory), care must be taken to actually -# have all the needed binaries online _now_ ... -# -# Uncomment or comment out sections depending on which -# services your site requires. -# -# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> -# Modified for Slackware by Patrick Volkerding <volkerdi@slackware.com> - - -# At this point, we are ready to talk to The World... - - -# Mount remote (NFS) filesystems: -if cat /etc/fstab | grep -v '^#' | grep -w nfs 1> /dev/null 2> /dev/null ; then - # Start the RPC portmapper if we find NFS volumes defined in /etc/fstab, - # since it will need to be running in order to mount them. If portmap - # is not running, attempting to mount an NFS partition will cause mount - # to hang. Keep this in mind if you plan to mount unlisted partitions... - if [ -x /etc/rc.d/rc.portmap ]; then - . /etc/rc.d/rc.portmap start - else - # Warn about a possible NFS problem. It's also possible to mount NFS partitions - # without rpc.portmap by using '-o nolock' (not a good idea in most cases). - echo "WARNING: NFS partitions found in /etc/fstab, but /etc/rc.d/rc.portmap is" - echo " not executable. If you do not run portmap, NFS partitions will" - echo " not mount properly. To start rpc.portmap at boot, change the" - echo " permissions on /etc/rc.d/rc.portmap: chmod 755 /etc/rc.d/rc.portmap" - sleep 10 - fi - echo "Mounting remote (NFS) file systems: /sbin/mount -a -t nfs" - /sbin/mount -a -t nfs # This may be our /usr runtime! - # Show the mounted volumes: - /sbin/mount -v -t nfs -fi - -# Load the RPC portmapper if /etc/rc.d/rc.portmap is executable. -# This might be needed to mount NFS partitions that are not listed in /etc/fstab. -if [ -x /etc/rc.d/rc.portmap ]; then - . /etc/rc.d/rc.portmap start -fi - -# Mount remote (SMB) filesystems: -if cat /etc/fstab | grep -v '^#' | grep -w smbfs 1> /dev/null 2> /dev/null ; then - echo "Mounting remote (SMB) file systems: /sbin/mount -a -t smbfs" - /sbin/mount -a -t smbfs - # Show the mounted volumes: - /sbin/mount -v -t smbfs -fi - -# Start the system logger if it is not already running (maybe because /usr -# is on a network partition). -if [ -x /etc/rc.d/rc.syslog -a -d /var/log -a ! -r /var/run/syslogd.pid ]; then - . /etc/rc.d/rc.syslog start -fi - -# If there is a firewall script, run it before enabling packet forwarding. -# See the HOWTOs on http://www.netfilter.org/ for documentation on -# setting up a firewall or NAT on Linux. In some cases this might need to -# be moved past the section below dealing with IP packet forwarding. -if [ -x /etc/rc.d/rc.firewall ]; then - /etc/rc.d/rc.firewall start -fi - -# Turn on IPv4 packet forwarding support. -if [ -x /etc/rc.d/rc.ip_forward ]; then - . /etc/rc.d/rc.ip_forward start -fi - -# Start the inetd server: -if [ -x /etc/rc.d/rc.inetd ]; then - /etc/rc.d/rc.inetd start -fi - -# Start the OpenSSH SSH daemon: -if [ -x /etc/rc.d/rc.sshd ]; then - echo "Starting OpenSSH SSH daemon: /usr/sbin/sshd" - /etc/rc.d/rc.sshd start -fi - -# Start the BIND name server daemon: -if [ -x /etc/rc.d/rc.bind ]; then - /etc/rc.d/rc.bind start -fi - -# Start NIS (the Network Information Service): -if [ -x /etc/rc.d/rc.yp ]; then - . /etc/rc.d/rc.yp start -fi - -# Start the NFS server. Note that for this to work correctly, you'll -# need to load the knfsd module for kernel NFS server support. -# You'll also need to set up some shares in /etc/exports, and be sure -# that /etc/rc.d/rc.portmap is executable. -# Starting the NFS server: -if [ -x /etc/rc.d/rc.nfsd ]; then - /etc/rc.d/rc.nfsd start -fi - -# Stuff you won't need follows. ;-) - -# # Start the network routing daemon: -# if [ -x /usr/sbin/routed ]; then -# echo "Starting network routing daemon: /usr/sbin/routed" -# /usr/sbin/routed -g -s -# fi - -# # Start the system status server: -# if [ -x /usr/sbin/rwhod ]; then -# echo "Starting system status server: /usr/sbin/rwhod" -# /usr/sbin/rwhod -# fi - -# # Fire up the PC-NFS daemon(s). This is a primarily obsolete system, and may -# # not be very secure. It's not at all needed for normal NFS server support. -# # You probably should not run this. -# if [ -x /usr/sbin/rpc.pcnfsd ]; then -# echo "Starting PC-NFS daemons: /usr/sbin/rpc.pcnfsd /usr/sbin/rpc.bwnfsd" -# /usr/sbin/rpc.pcnfsd /var/spool/lpd -# fi -# if [ -x /usr/sbin/rpc.bwnfsd ]; then -# /usr/sbin/rpc.bwnfsd /var/spool/lpd -# fi - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inetd b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inetd deleted file mode 100644 index 9fe1419..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inetd +++ /dev/null @@ -1,36 +0,0 @@ -#!/bin/sh -# Start/stop/restart inetd, the BSD Internet super-daemon. - -# Start inetd: -inetd_start() { - if [ -x /usr/sbin/inetd ]; then - echo "Starting Internet super-server daemon: /usr/sbin/inetd" - /usr/sbin/inetd - fi -} - -# Stop inetd: -inetd_stop() { - killall inetd -} - -# Restart inetd: -inetd_restart() { - inetd_stop - sleep 1 - inetd_start -} - -case "$1" in -'start') - inetd_start - ;; -'stop') - inetd_stop - ;; -'restart') - inetd_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.ip_forward b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.ip_forward deleted file mode 100644 index 52bd2fe..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.ip_forward +++ /dev/null @@ -1,64 +0,0 @@ -#!/bin/sh -# /etc/rc.d/rc.ip_forward: start/stop IP packet forwarding -# -# If you intend to run your Linux box as a router, i.e. as a -# computer that forwards and redistributes network packets, you -# will need to enable IP packet forwarding in your kernel. -# -# To activate IP packet forwarding at boot time, make this -# script executable: chmod 755 /etc/rc.d/rc.ip_forward -# -# To disable IP packet forwarding at boot time, make this -# script non-executable: chmod 644 /etc/rc.d/rc.ip_forward - -# Start IP packet forwarding: -ip_forward_start() { - if [ -f /proc/sys/net/ipv4/ip_forward ]; then - echo "Activating IPv4 packet forwarding." - echo 1 > /proc/sys/net/ipv4/ip_forward - fi - # When using IPv4 packet forwarding, you will also get the - # rp_filter, which automatically rejects incoming packets if the - # routing table entry for their source address doesn't match the - # network interface they're arriving on. This has security - # advantages because it prevents the so-called IP spoofing, - # however it can pose problems if you use asymmetric routing - # (packets from you to a host take a different path than packets - # from that host to you) or if you operate a non-routing host - # which has several IP addresses on different interfaces. To - # turn rp_filter off, uncomment the lines below: - #if [ -r /proc/sys/net/ipv4/conf/all/rp_filter ]; then - # echo "Disabling rp_filter." - # echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter - #fi -} - -# Stop IP packet forwarding: -ip_forward_stop() { - if [ -f /proc/sys/net/ipv4/ip_forward ]; then - echo "Disabling IPv4 packet forwarding." - echo 0 > /proc/sys/net/ipv4/ip_forward - fi -} - -# Restart IP packet forwarding: -ip_forward_restart() { - ip_forward_stop - sleep 1 - ip_forward_start -} - -case "$1" in -'start') - ip_forward_start - ;; -'stop') - ip_forward_stop - ;; -'restart') - ip_forward_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.local b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.local deleted file mode 100755 index 3cf2076..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.local +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/sh -# -# /etc/rc.d/rc.local: Local system initialization script. -# -# Put any local setup commands in here: diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.mysqld b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.mysqld deleted file mode 100644 index 239e2e6..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.mysqld +++ /dev/null @@ -1,80 +0,0 @@ -#!/bin/sh -# Start/stop/restart mysqld. -# -# Copyright 2003 Patrick J. Volkerding, Concord, CA -# Copyright 2003 Slackware Linux, Inc., Concord, CA -# -# This program comes with NO WARRANTY, to the extent permitted by law. -# You may redistribute copies of this program under the terms of the -# GNU General Public License. - -# To start MySQL automatically at boot, be sure this script is executable: -# chmod 755 /etc/rc.d/rc.mysqld - -# Before you can run MySQL, you must have a database. To install an initial -# database, do this as root: -# -# su - mysql -# mysql_install_db -# -# Note that step one is becoming the mysql user. It's important to do this -# before making any changes to the database, or mysqld won't be able to write -# to it later (this can be fixed with 'chown -R mysql.mysql /var/lib/mysql'). - -# To disallow outside connections to the database (if you don't need them, this -# is recommended to increase security), uncomment the next line: -#SKIP="--skip-networking" - -# Start mysqld: -mysqld_start() { - if [ -x /usr/bin/mysqld_safe ]; then - # If there is an old PID file (no mysqld running), clean it up: - if [ -r /var/run/mysql/mysql.pid ]; then - if ! ps ax | grep mysqld 1> /dev/null 2> /dev/null ; then - echo "Cleaning up old /var/run/mysql/mysql.pid." - rm -f /var/run/mysql/mysql.pid - fi - fi - /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid $SKIP & - fi -} - -# Stop mysqld: -mysqld_stop() { - # If there is no PID file, ignore this request... - if [ -r /var/run/mysql/mysql.pid ]; then - killall mysqld - # Wait at least one minute for it to exit, as we don't know how big the DB is... - for second in 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 \ - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 60 ; do - if [ ! -r /var/run/mysql/mysql.pid ]; then - break; - fi - sleep 1 - done - if [ "$second" = "60" ]; then - echo "WARNING: Gave up waiting for mysqld to exit!" - sleep 15 - fi - fi -} - -# Restart mysqld: -mysqld_restart() { - mysqld_stop - mysqld_start -} - -case "$1" in -'start') - mysqld_start - ;; -'stop') - mysqld_stop - ;; -'restart') - mysqld_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.postfix b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.postfix deleted file mode 100644 index bc32367..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.postfix +++ /dev/null @@ -1,45 +0,0 @@ -#!/bin/sh -# -## Slackware init script for postfix -## 20030828 Manolis Tzanidakis -# - -postfix_start() { - if [ -x /usr/sbin/postfix ]; then - echo -n "Starting postfix MTA: " - echo "/usr/sbin/postfix start" - /usr/sbin/postfix start 2>/dev/null - fi -} - -postfix_stop() { - /usr/sbin/postfix stop 2>/dev/null -} - -postfix_restart() { - sh $0 stop - sleep 1 - sh $0 start -} - -postfix_reload() { - /usr/sbin/postfix reload 2>/dev/null -} - -case "$1" in - 'start') - postfix_start - ;; - 'stop') - postfix_stop - ;; - 'restart') - postfix_restart - ;; - 'reload') - postfix_reload - ;; - *) - echo "usage $0 start|stop|restart|reload" -esac - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sendmail b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sendmail deleted file mode 100644 index 1a31c52..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sendmail +++ /dev/null @@ -1,38 +0,0 @@ -#!/bin/sh -# Start/stop/restart sendmail. - -# Start sendmail: -sendmail_start() { - if [ -x /usr/sbin/sendmail ]; then - echo "Starting sendmail MTA daemon: /usr/sbin/sendmail -L sm-mta -bd -q25m" - /usr/sbin/sendmail -L sm-mta -bd -q25m - echo "Starting sendmail MSP queue runner: /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m" - /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m - fi -} - -# Stop sendmail: -sendmail_stop() { - killall sendmail -} - -# Restart sendmail: -sendmail_restart() { - sendmail_stop - sleep 1 - sendmail_start -} - -case "$1" in -'start') - sendmail_start - ;; -'stop') - sendmail_stop - ;; -'restart') - sendmail_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.serial b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.serial deleted file mode 100755 index 5f31c01..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.serial +++ /dev/null @@ -1,132 +0,0 @@ -# -# /etc/rc.serial -# Initializes the serial ports on your system -# -# chkconfig: 2345 50 75 -# description: This initializes the settings of the serial port -# -# FILE_VERSION: 19981128 -# -# Distributed with setserial and the serial driver. We need to use the -# FILE_VERSION field to assure that we don't overwrite a newer rc.serial -# file with a newer one. -# -# XXXX For now, the autosave feature doesn't work if you are -# using the multiport feature; it doesn't save the multiport configuration -# (for now). Autosave also doesn't work for the hayes devices. -# - -RCLOCKFILE=/var/lock/subsys/serial -DIRS="/lib/modules/`uname -r`/misc /lib/modules /usr/lib/modules ." -PATH=/bin:/sbin:/usr/bin -DRIVER=serial -DRIVER_NAME=serial -MODULE_REGEXP="serial\b" - -ALLDEVS="/dev/ttyS?" -if /bin/ls /dev/ttyS?? >& /dev/null ; then - ALLDEVS="$ALLDEVS /dev/ttyS??" -fi - -SETSERIAL="" -if test -x /bin/setserial ; then - SETSERIAL=/bin/setserial -elif test -x /sbin/setserial ; then - SETSERIAL=/sbin/setserial -fi - -# -# See if the serial driver is loaded -# -LOADED="" -if test -f /proc/devices; then - if grep -q " ttyS$" /proc/devices ; then - LOADED="yes" - else - LOADED="no" - fi -fi - -# -# Find the serial driver -# -for i in $DIRS -do - if test -z "$MODULE" -a -f $i/$DRIVER.o ; then - MODULE=$i/$DRIVER.o - fi -done - -if ! test -f /proc/modules ; then - MODULE="" -fi - -# -# Handle System V init conventions... -# -case $1 in -start) - action="start"; - ;; -stop) - action="stop"; - ;; -*) - action="start"; -esac - -if test $action = stop ; then - if test -n ${SETSERIAL} -a "$LOADED" != "no" -a \ - `head -1 /etc/serial.conf`X = "###AUTOSAVE###X" ; then - echo -n "Saving state of serial devices... " - grep "^#" /etc/serial.conf > /etc/.serial.conf.new - ${SETSERIAL} -G -g ${ALLDEVS} >> /etc/.serial.conf.new - mv /etc/serial.conf /etc/.serial.conf.old - mv /etc/.serial.conf.new /etc/serial.conf - echo "done." - fi - if test -n "$MODULE" ; then - module=`grep $MODULE_REGEXP /proc/modules | awk '{print $1}'` - if test -z "$module" ; then - echo "The $DRIVER_NAME driver is not loaded." - rm -f ${RCLOCKFILE} - exit 0 - fi - if rmmod $module ; then :; else - echo "The $DRIVER_NAME driver could NOT be unloaded." - exit 1; - fi - echo "The $DRIVER_NAME driver has been unloaded." - fi - rm -f ${RCLOCKFILE} - exit 0 -fi - -# -# If not stop, it must be a start.... -# - -if test -n "$MODULE" -a "$LOADED" != "yes" ; then - if insmod -f $MODULE $DRIVER_ARG ; then - true - else - echo "Couldn't load $DRIVER_NAME driver." - exit 1 - fi -fi - -if test -f /etc/serial.conf ; then - if test -n ${SETSERIAL} ; then - grep -v ^# < /etc/serial.conf | while read device args - do - if [ ! "$device" = "" -a ! "$args" = "" ]; then - ${SETSERIAL} -z $device $args - fi - done - fi -else - echo "###AUTOSAVE###" > /etc/serial.conf -fi - -touch ${RCLOCKFILE} -${SETSERIAL} -bg ${ALLDEVS} diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sshd b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sshd deleted file mode 100755 index a3707e3..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sshd +++ /dev/null @@ -1,50 +0,0 @@ -#!/bin/sh -# Start/stop/restart the secure shell server: - -sshd_start() { - # Create host keys if needed. - if [ ! -r /etc/ssh/ssh_host_key ]; then - /usr/bin/ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N '' - fi - if [ ! -f /etc/ssh/ssh_host_dsa_key ]; then - /usr/bin/ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N '' - fi - if [ ! -f /etc/ssh/ssh_host_rsa_key ]; then - /usr/bin/ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N '' - fi - /usr/sbin/sshd -} - -sshd_stop() { - killall sshd -} - -sshd_restart() { - if [ -r /var/run/sshd.pid ]; then - echo "WARNING: killing listener process only. To kill every sshd process, you must" - echo " use 'rc.sshd stop'. 'rc.sshd restart' kills only the parent sshd to" - echo " allow an admin logged in through sshd to use 'rc.sshd restart' without" - echo " being cut off. If sshd has been upgraded, new connections will now" - echo " use the new version, which should be a safe enough approach." - kill `cat /var/run/sshd.pid` - else - killall sshd - fi - sleep 1 - sshd_start -} - -case "$1" in -'start') - sshd_start - ;; -'stop') - sshd_stop - ;; -'restart') - sshd_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.syslog b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.syslog deleted file mode 100755 index a005fb7..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.syslog +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/sh -# Start/stop/restart the system logging daemons. -# -# Written for Slackware Linux by Patrick J. Volkerding <volkerdi@slackware.com>. - -syslogd_start() { - if [ -x /usr/sbin/syslogd -a -x /usr/sbin/klogd ]; then - echo -n "Starting sysklogd daemons: " - echo -n "/usr/sbin/syslogd " - /usr/sbin/syslogd - sleep 1 # prevent syslogd/klogd race condition on SMP kernels - echo "/usr/sbin/klogd -c 3 -x" - # '-c 3' = display level 'error' or higher messages on console - # '-x' = turn off broken EIP translation - /usr/sbin/klogd -c 3 -x - fi -} - -syslogd_stop() { - killall syslogd 2> /dev/null - killall klogd 2> /dev/null -} - -syslogd_restart() { - syslogd_stop - sleep 1 - syslogd_start -} - -case "$1" in -'start') - syslogd_start - ;; -'stop') - syslogd_stop - ;; -'restart') - syslogd_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sysvinit b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sysvinit deleted file mode 100755 index 916e59e..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sysvinit +++ /dev/null @@ -1,58 +0,0 @@ -#!/bin/sh -# -# rc.sysvinit This file provides basic compatibility with SystemV style -# startup scripts. The SystemV style init system places -# start/stop scripts for each runlevel into directories such as -# /etc/rc.d/rc3.d/ (for runlevel 3) instead of starting them -# from /etc/rc.d/rc.M. This makes for a lot more init scripts, -# and a more complicated execution path to follow through if -# something goes wrong. For this reason, Slackware has always -# used the traditional BSD style init script layout. -# -# However, many binary packages exist that install SystemV -# init scripts. With rc.sysvinit in place, most well-written -# startup scripts will work. This is primarily intended to -# support commercial software, though, and probably shouldn't -# be considered bug free. -# -# Written by Patrick Volkerding <volkerdi@slackware.com>, 1999 -# from an example by Miquel van Smoorenburg <miquels@cistron.nl>. - -# Run an init script: -startup() { - case "$1" in - *.sh) - sh "$@" - ;; - *) - "$@" - ;; - esac -} - -# Set onlcr to avoid staircase effect. -stty onlcr 0>&1 - -if [ "$runlevel" = "" ]; then - runlevel=$RUNLEVEL - export runlevel - prevlevel=$PREVLEVEL - export prevlevel -fi - -# Run kill scripts in the previous runlevel if not "none" -if [ ! "$prevlevel" = "N" ]; then - for script in /etc/rc.d/rc$prevlevel.d/K* ; do - if [ -x $script ]; then - startup $script stop - fi - done -fi - -# Now do the startup scripts: -for script in /etc/rc.d/rc$runlevel.d/S* ; do - if [ -x $script ]; then - startup $script start - fi -done - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rssh.conf b/templates/vserver-legacy/vserver-legacy.d/etc/rssh.conf deleted file mode 100644 index a74acc6..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/rssh.conf +++ /dev/null @@ -1,48 +0,0 @@ -# This is the default rssh config file - -# set the log facility. "LOG_USER" and "user" are equivalent. -logfacility = LOG_USER - -# Leave these all commented out to make the default action for rssh to lock -# users out completely... - -allowscp -allowsftp -#allowcvs -#allowrdist -#allowrsync - -# set the default umask -umask = 022 - -# If you want to chroot users, use this to set the directory where the root of -# the chroot jail will be located. -# -# if you DO NOT want to chroot users, LEAVE THIS COMMENTED OUT. -# You can quote anywhere, but quotes not required unless path contains a -# space... as in this example. - -chrootpath = "/var/users" - -########################################## -# EXAMPLES of configuring per-user options - -#user=rudy:077:00010: # the path can simply be left out to not chroot -#user=rudy:077:00010 # the ending colon is optional - -#spaces in the path must be quoted... -#user=rudy:011:00001:"/usr/local/chroot dir" # scp with chroot -#user=rudy:011:00010:"/usr/local/chroot dir" # sftp with chroot -#user=rudy:011:00011:"/usr/local/chroot dir" # both with chroot -#user=rudy:011:00100: # cvs, with no chroot -#user=rudy:011:01000: # rdist, with no chroot -#user=rudy:011:10000: # rsync, with no chroot -#user="rudy:011:00001:/usr/local/chroot" # whole user string can be quoted -#user=rudy:01"1:00001:/usr/local/chroot" # or somewhere in the middle, freak! -#user=rudy:'011:00001:/usr/local/chroot' # single quotes too - -# Spaces before or after the '=' are fine, but spaces in chrootpath need -# quotes. -#user = "rudy:011:00001:/usr/local/chroot dir" -#user = "rudy:011:00001:/usr/local/chroot dir" # neither do comments at line end - diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/ssh/sshd_config b/templates/vserver-legacy/vserver-legacy.d/etc/ssh/sshd_config deleted file mode 100644 index a161fec..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/etc/ssh/sshd_config +++ /dev/null @@ -1,103 +0,0 @@ -# $OpenBSD: sshd_config,v 1.69 2004/05/23 23:59:53 dtucker Exp $ - -# This is the sshd server system-wide configuration file. See -# sshd_config(5) for more information. - -# This sshd was compiled with PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin - -# The strategy used for options in the default sshd_config shipped with -# OpenSSH is to specify options with their default value where -# possible, but leave them commented. Uncommented options change a -# default value. - -#Port 22 -#Protocol 2,1 -#ListenAddress 0.0.0.0 -#ListenAddress :: - -# HostKey for protocol version 1 -#HostKey /etc/ssh/ssh_host_key -# HostKeys for protocol version 2 -#HostKey /etc/ssh/ssh_host_rsa_key -#HostKey /etc/ssh/ssh_host_dsa_key - -# Lifetime and size of ephemeral version 1 server key -#KeyRegenerationInterval 1h -#ServerKeyBits 768 - -# Logging -#obsoletes QuietMode and FascistLogging -#SyslogFacility AUTH -#LogLevel INFO - -# Authentication: - -#LoginGraceTime 2m -PermitRootLogin no -#StrictModes yes -#MaxAuthTries 6 - -#RSAAuthentication yes -#PubkeyAuthentication yes -#AuthorizedKeysFile .ssh/authorized_keys - -# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -#RhostsRSAAuthentication no -# similar for protocol version 2 -#HostbasedAuthentication no -# Change to yes if you don't trust ~/.ssh/known_hosts for -# RhostsRSAAuthentication and HostbasedAuthentication -#IgnoreUserKnownHosts no -# Don't read the user's ~/.rhosts and ~/.shosts files -#IgnoreRhosts yes - -# To disable tunneled clear text passwords, change to no here! -#PasswordAuthentication yes -#PermitEmptyPasswords no - -# Change to no to disable s/key passwords -#ChallengeResponseAuthentication yes - -# Kerberos options -#KerberosAuthentication no -#KerberosOrLocalPasswd yes -#KerberosTicketCleanup yes -#KerberosGetAFSToken no - -# GSSAPI options -#GSSAPIAuthentication no -#GSSAPICleanupCredentials yes - -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will -# be allowed through the ChallengeResponseAuthentication mechanism. -# Depending on your PAM configuration, this may bypass the setting of -# PasswordAuthentication, PermitEmptyPasswords, and -# "PermitRootLogin without-password". If you just want the PAM account and -# session checks to run without PAM authentication, then enable this but set -# ChallengeResponseAuthentication=no -#UsePAM no - -#AllowTcpForwarding yes -#GatewayPorts no -#X11Forwarding no -#X11DisplayOffset 10 -#X11UseLocalhost yes -#PrintMotd yes -#PrintLastLog yes -#TCPKeepAlive yes -#UseLogin no -#UsePrivilegeSeparation yes -#PermitUserEnvironment no -#Compression yes -#ClientAliveInterval 0 -#ClientAliveCountMax 3 -#UseDNS yes -#PidFile /var/run/sshd.pid -#MaxStartups 10 - -# no default banner path -#Banner /some/path - -# override default of no subsystems -Subsystem sftp /usr/libexec/sftp-server diff --git a/templates/vserver-legacy/vserver-legacy.d/var/www/htdocs/missing.html b/templates/vserver-legacy/vserver-legacy.d/var/www/htdocs/missing.html deleted file mode 100644 index b2eec17..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/var/www/htdocs/missing.html +++ /dev/null @@ -1,12 +0,0 @@ -<html> -<head> -<title>404 - Not Found</title> -</head> -<body> - <center> - <pre> - O endereço que você requisitou não pôde ser encontrado :( - </pre> - </center> -</body> -</html> diff --git a/templates/vserver-legacy/vserver-legacy.d/var/www/missing.html b/templates/vserver-legacy/vserver-legacy.d/var/www/missing.html deleted file mode 100644 index b2eec17..0000000 --- a/templates/vserver-legacy/vserver-legacy.d/var/www/missing.html +++ /dev/null @@ -1,12 +0,0 @@ -<html> -<head> -<title>404 - Not Found</title> -</head> -<body> - <center> - <pre> - O endereço que você requisitou não pôde ser encontrado :( - </pre> - </center> -</body> -</html> diff --git a/templates/vserver-legacy/vserver-legacy.s/GPG-KEY b/templates/vserver-legacy/vserver-legacy.s/GPG-KEY deleted file mode 100644 index fd23e95..0000000 --- a/templates/vserver-legacy/vserver-legacy.s/GPG-KEY +++ /dev/null @@ -1,88 +0,0 @@ -security@slackware.com public key - -Type bits/keyID Date User ID -pub 1024D/40102233 2003-02-26 Slackware Linux Project <security@slackware.com> -sub 1024g/4E523569 2003-02-26 [expires: 2012-12-21] - ------BEGIN PGP PUBLIC KEY BLOCK----- -Version: GnuPG v1.2.1 (GNU/Linux) - -mQGiBD5dIFQRBADB31WinbXdaGk/8RNkpnZclu1w3Xmd5ItACDLB2FhOhArw35EA -MOYzxI0gRtDNWN4pn9n74q4HbFzyRWElThWRtBTYLEpImzrk7HYVCjMxjw5A0fTr -88aiHOth5aS0vPAoq+3TYn6JDSipf2bR03G2JVwgj3Iu066pX4naivNm8wCgldHG -F3y9vT3UPYh3QFgEUlCalt0D/3n6NopRYy0hMN6BPu+NarXwv6NQ9g0GV5FNjEEr -igkrD/htqCyWAUl8zyCKKUFZZx4UGBRZ5guCdNzwgYH3yn3aVMhJYQ6tcSlLsj3f -JIz4LAZ3+rI77rbn7gHHdp7CSAuV+QHv3aNanUD/KGz5SPSvF4w+5qRM4PfPNT1h -LMV8BACzxiyX7vzeE4ZxNYvcuCtv0mvEHl9yD66NFA35RvXaO0QiRVYeoUa5JOQZ -gwq+fIB0zgsEYDhXFkC1hM/QL4NccMRk8C09nFn4eiz4dAEnwKt4rLCJKhkLl1DW -TSoXHe/dOXaLnFyLzB1J8hEYmUvw3SwPt//wMqDiVBLeZfFcdLQwU2xhY2t3YXJl -IExpbnV4IFByb2plY3QgPHNlY3VyaXR5QHNsYWNrd2FyZS5jb20+iF8EExECAB8F -Aj5dIFQFCRJ3owAECwcDAgMVAgMDFgIBAh4BAheAAAoJEGpEY8BAECIzee0An3My -boalJ5nLePD0HCzMuf8Ix8gPAJ9lnU1wqNVGza0t89ACTurDoppQ2rkBDQQ+XSBV -EAQA3VYlpPyRKdOKoM6t1SwNG0YgVFSvxy/eiratBf7misDBsJeH86Pf8H9OfVHO -cqscLiC+iqvDgqeTUX9vASjlnvcoS/3H5TDPlxiifIDggqd2euNtJ8+lyXRBV6yP -sBIA6zki9cR4zphe48hKpSsDfj7uL5sfyc2UmKKboSu3x7cAAwUD/1jmoLQs9bIt -bTosoy+5+Uzrl0ShRlv+iZV8RPzAMFuRJNxUJkUmmThowtXRaPKFI9AVd+pP44aA -J+zxCPtS2isiW20AxubJoBPpXcVatJWi4sG+TM5Z5VRoLg7tIDNVWsyHGXPAhIG2 -Y8Z1kyWwb4P8A/W2b1ZCqS7Fx4yEhTikiEwEGBECAAwFAj5dIFUFCRJ3owAACgkQ -akRjwEAQIjM1uwCdE7V4mPCqdby/nV699NxKX0iW/OsAniaVhEip8Ptff74Sv4JV -tb+Sth2l -=H5uu ------END PGP PUBLIC KEY BLOCK----- - -slamd64 public key - ------BEGIN PGP PUBLIC KEY BLOCK----- -Version: GnuPG v1.2.6 (GNU/Linux) - -mQGiBELKSBYRBACiElxGMXqxUwdsQBKPngV6/k0Q5AYT34+WLL0B7XRR9kOotCfc -PTLCP5qLM9etpzKhbMbgWGpaBrA/3KEPOJ7JVhk6JcLgjoi0QsMusaI4BGnmrxkw -3mh9xPwc+jPgiYOljbZhNG6FMQtrdlKYV+BmwS8mt/YBymShghtlgdHJjwCg/PAG -YJDsfoG1ebuwcjYlsGoD2x0EAJX7UnTdxxESvmIuk172MunZqw+o8+o/W684z13/ -wOkcVqvuAcd0ejuY0z09GFfyhtig8E55UcKNyVC50+3aJUXlt9//HnENHZo+OEN1 -ezbOXUcJIw8xkU551qaxubqWXtKYEJP9z/khVPe4N0JW2vWOcAFYhuOEx1ylaNrX -gUY4BACDpn+pntq0ooZqkSPT4v1ibOQg/3xh2F1PgsnOahMRrXbVEdL9ItsVnHM/ -ygHBjLhkEMd612nVVSw1BYMBAwQbsYB8Lgn1QxXl0ISBYR1RYW1LvyaJM6A6TDL+ -EdWp+iTtlKOe/VD+oCfHmMONoucZJM2AtK1vXTX3x4Wb4MgVdLQoRnJlZGVyaWNr -IEVtbW90dCA8bWFpbEBmcmVkZW1tb3R0LmNvLnVrPohkBBMRAgAkBQJCykgWAhsD -BQkDwmcABgsJCAcDAgMVAgMDFgIBAh4BAheAAAoJEAd5Da1T/acLGfIAoOqIHrg4 -r2pq/tKi9VifOJS1xg4LAKDpi0I0pzsdDJ2owxCQ88MkoSDKgohMBBARAgAMBQJD -Ed/tBYMDes8pAAoJEFgpV1AFAIOLprQAnRDVVmDPnzVNOWrZ8D55gG2bOwkxAKCl -dGThnu0aQ0IEL7MgUETGtk4hS4iiBBABAgAMBQJDEdpDBYMDetTTAAoJEJugaRW/ -hasxqCwEAKczPTgOrRXXTs4piB14DayJQVgoqVgiNfKzd5qVuvQgYebQrMu7hi5U -0q/n6TbQpjmMDZKxhXhEY1gs32mtzKKDrerTpF+pJAgQVvBLZS2mF4HbVnU74GvL -2UKJtEtgb9u+i1Efd4Q8GIJUzLLJifURQWTk1e3B9qGApKXpWJlviEwEEBECAAwF -AkMR75MFgwN6v4MACgkQTqjEwhXvPN1j7gCbBXZs9MM6YXGI/yTlEhiXyTECxm8A -nj6O1XszSa5kaD7CvnRFzNkm5O5MiEwEEBECAAwFAkMR79UFgwN6v0EACgkQoLYC -8AehV8eLBQCgv8WEdBtFjTh3Wl06WK5dKCw0nHsAn0IIHRbJC5jO4NWrIpupBMnz -3fBsiEwEExECAAwFAkMR9ggFgwN6uQ4ACgkQR+ny47i1wzAfZQCfRACyfYBxs+tu -6OzpLP2DGjEaa1UAnj4MVMH32f/34oN6o9dPKPT8HXWziEwEExECAAwFAkMR9vcF -gwN6uB8ACgkQB0u7y43syeIaogCfVy7lqRjRDbttJs1u1g3FekdbJ1kAnRo726tA -u8Xf+JWD3OrmMo0Uup3giEwEEBECAAwFAkMR+qgFgwN6tG4ACgkQfWXW5We1ioQk -tgCePGa3NpcfEWb8drmO95Mp1C+FaBIAoNEqA89xUvTIpqooucTzFxgAupVgiEwE -EBECAAwFAkMSF+UFgwN6lzEACgkQ/lREvmcCFhscDQCgnMxf4Nmu3B41GWupTWxb -9b+te5sAoIiTZHzOSKtqN4cJ2i22iP/vZPt4iEwEEBECAAwFAkMULeAFgwN4gTYA -CgkQsxZ93p+gHn6bcACgwY/5ZpvvEK+eycM5XNQhVI6w4j8An0JoXlFaGStIzUmW -42obaW6CG4WViEYEExECAAYFAkMUZuAACgkQGnR+RTDgudhG1QCeJelEhnX/3JeW -S5BaM7640suSeLQAnA2RDMH4zIJLI4MWEXBAvaA0lSr7iEwEEBECAAwFAkMUP8gF -gwN4b04ACgkQM/XwBW70U1iAOwCgmah/GnZikIhyeFr6KsKpsmZCQTQAn3Vs7JZm -w4qBLiI+RXxw7vIJlI4AiEwEEBECAAwFAkMUZ9EFgwN4R0UACgkQ72KcVAmwbhAC -FACgiNqao9mzAWZBjIY7iiqz34gbK/QAn34F1bLAb0sHKiSUcFkVi/uZ8R0viEwE -EBECAAwFAkMWFj8FgwN2mNcACgkQn3j4POjENGF+UgCeM+mEKW5+MjNN17QCAvZi -cBVJEHMAn14YyvdSIwBBFUNPWYOw7GwYyAhHiEwEEBECAAwFAkMXW0cFgwN1U88A -CgkQTxqZjtpq5iG4PwCfe2ymOYh5t+bEZGGCtJg3sWJ5hHYAmQGS+jGWcTMlXSe+ -65o/aPfLUkMQuQINBELKSCgQCADjG+pX7C0sRIkX1QQ6lFW3IrajWypXtd4jO1TA -dlLFES7OxF202V15+TRtL9NO34x7u6RPTnF7wi/i2U1dqM9ZjrFcTJA17Y7+OLH+ -yw64/5OJapUi48qI7hnLRTPykz0c+b92pUt1X/BIWmf301jbZ0AbFZV4yvm1OUH4 -wrGLLFeATjiBWTcJarRiR89DzQ/Cm+c791WXdIhEvv5Vp4/d8HzGZhEUVKTCoA3e -Z8ZIdJoy/d7FYfyeg836UDXEqr598n2p9DxMwkRj5oHINB64CrQuKr7zDdP8Zv2g -vKkjeS4mN+07saWK3UTY5ADByNVHSu+P0LZYPhxjze7KOVjHAAUTCACa5ohR/7/N -x2M2OB9VPAwQPjAFNst6fPotcFLDy5Q/jlbBcDNf1OdzgkE/06z7iPGRmIJL6flz -QZH+hYwDqjulVVtPQXiZMVGvlfC9YIAdJX/1Ca2L9mL4c4IBQbFNkSlgkLaPTwUJ -BD2PnA+q+ERy39UANhIR/LVGltK1krDds8CwbxMSYNFvFgf4dmh6GzI5ioByDoTM -8ShfS2GjAekviNVLsGC5UWKuQl/XVaC/j7CTAT7WbikfXWI2uonFBx47vjf2UaPa -E0HnAVwDY0cAZeaObpDKvyogsf8H4CzK9JCKtW9aTUpKurEpyHfcKqB07GMLC/+Q -QiA3bFmrSaTRiE8EGBECAA8FAkLKSCgCGwwFCQPCZwAACgkQB3kNrVP9pwsejwCg -gaQm6lU/H7ja0EUaJJFZnRoqRvAAnRK8CC4PIr/ZYDjd+aeS3R31FjGr -=D1wm ------END PGP PUBLIC KEY BLOCK----- diff --git a/templates/vserver-legacy/vserver-legacy.s/devices.tar.gz b/templates/vserver-legacy/vserver-legacy.s/devices.tar.gz Binary files differdeleted file mode 100644 index 992ba79..0000000 --- a/templates/vserver-legacy/vserver-legacy.s/devices.tar.gz +++ /dev/null diff --git a/templates/vserver-legacy/vserver-legacy.s/skel.conf b/templates/vserver-legacy/vserver-legacy.s/skel.conf deleted file mode 100644 index 73985d3..0000000 --- a/templates/vserver-legacy/vserver-legacy.s/skel.conf +++ /dev/null @@ -1,70 +0,0 @@ -if [ "" = "" ] ; then -PROFILE=prod -fi -# Select the IP number assigned to the virtual server -# This IP must be one IP of the server, either an interface -# or an IP alias -# A vserver may have more than one IP. Separate them with spaces. -# do not forget double quotes. -# Some examples: -# IPROOT="1.2.3.4 2.3.4.5" -# IPROOT="eth0:1.2.3.4 eth1:2.3.4.5" -# If the device is not specified, IPROOTDEV is used -case $PROFILE in -prod) -#IPROOT=143.106.35.156 -IPROOT="eth0:192.168.0.1" -# The netmask and broadcast are computed by default from IPROOTDEV -#IPROOTMASK= -#IPROOTBCAST= -# You can define on which device the IP alias will be done -# The IP alias will be set when the server is started and unset -# when the server is stopped -#IPROOTDEV=eth0 -# You can set a different host name for the vserver -# If empty, the host name of the main server is used -S_HOSTNAME=skel -;; -backup) -IPROOT=1.2.3.4 -#IPROOTMASK= -#IPROOTBCAST= -#IPROOTDEV=eth0 -S_HOSTNAME= -;; -esac -# Uncomment the onboot line if you want to enable this -# virtual server at boot time -#ONBOOT=yes -# You can set a different NIS domain for the vserver -# If empty, the current on is kept -# Set it to "none" to have no NIS domain set -S_DOMAINNAME= -# You can set the priority level (nice) of all process in the vserver -# Even root won't be able to raise it -S_NICE= -# You can set various flags for the new security context -# lock: Prevent the vserver from setting new security context -# sched: Merge scheduler priority of all processes in the vserver -# so that it acts a like a single one. -# nproc: Limit the number of processes in the vserver according to ulimit -# (instead of a per user limit, this becomes a per vserver limit) -# private: No other process can join this security context. Even root -# Do not forget the quotes around the flags -S_FLAGS="lock nproc" -# You can set various ulimit flags and they will be inherited by the -# vserver. You enter here various command line argument of ulimit -# ULIMIT="-HS -u 200" -# The example above, combined with the nproc S_FLAGS will limit the -# vserver to a maximum of 200 processes -ULIMIT="-HS -u 1000" -# You can set various capabilities. By default, the vserver are run -# with a limited set, so you can let root run in a vserver and not -# worry about it. He can't take over the machine. In some cases -# you can to give a little more capabilities (such as CAP_NET_RAW) -# S_CAPS="CAP_NET_RAW" -S_CAPS="CAP_SETGID" -# Select an unused context (this is optional) -# The default is to allocate a free context on the fly -# In general you don't need to force a context -#S_CONTEXT= diff --git a/templates/vserver-legacy/vserver-legacy.s/vserver-legacy.sh b/templates/vserver-legacy/vserver-legacy.s/vserver-legacy.sh deleted file mode 100644 index 4ce8a4b..0000000 --- a/templates/vserver-legacy/vserver-legacy.s/vserver-legacy.sh +++ /dev/null @@ -1,49 +0,0 @@ -#!/bin/bash -# -# legacy vserver template -# - -BASE="/etc/simplepkg/templates/vserver-legacy/vserver-legacy.s/" -DEVICES="$BASE/devices.tar.gz" -GPGKEY="$BASE/GPG-KEY" -SKEL="$BASE/skel.conf" - -if [ -z "$2" ]; then - echo "usage: `basename $0` <jail-root> <jail-name>" - exit 1 -elif [ ! -d "$1/$2" ]; then - echo "folder $1/$2 does not exist" - exit 1 -fi - -cp /etc/resolv.conf $1/$2/etc/ -cp /etc/localtime $1/$2/etc/ -echo /dev/hdv1 / ext2 defaults 1 1 > $1/$2/etc/fstab -echo /dev/hdv1 / ext2 rw 0 0 > $1/$2/etc/mtab - -echo "creating devices and dependencies" -if [ -f "$DEVICES" ]; then - cd $1/$2/ - tar zxvf $DEVICES - chroot $1/$2/ sbin/ldconfig -else - echo error: device template $DEVICES not found -fi - -if [ -f "$SKEL" ]; then - echo "creating /etc/vservers/$2.conf" - mkdir -p /etc/vservers - cp $SKEL /etc/vservers/$2.conf -else - echo error: config file template $SKEL not found -fi - -if [ -f "$GPGKEY" ]; then - echo "importing slack gpg pubkey" - mkdir $1/$2/root/.gnupg - gpg --homedir $1/$2/root/.gnupg --import $GPGKEY -fi - -echo "done; now edit /etc/vservers/$2.conf" -echo "then, set all desired iptables rules and start $server vserver" -echo "dont forget to change root's password with the command "vserver $2 exec passwd"" diff --git a/templates/vserver-legacy/vserver-legacy.template b/templates/vserver-legacy/vserver-legacy.template deleted file mode 100644 index b810e32..0000000 --- a/templates/vserver-legacy/vserver-legacy.template +++ /dev/null @@ -1,251 +0,0 @@ -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: A1 (Base Linux series) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -aaa_base: ADD -aaa_elflibs: ADD -bash: ADD -bin: ADD -bzip2: ADD -coreutils: ADD -cxxlibs: ADD -dcron: ADD -elvis: ADD -etc: ADD -findutils: ADD -gawk: ADD -gettext: REC -grep: ADD -gzip: ADD -infozip: ADD -less: ADD -logrotate: ADD -openssl-solibs: ADD -pkgtools: ADD -procps: ADD -sed: ADD -shadow: ADD -slocate: ADD -sysklogd: ADD -sysvinit: ADD -tar: ADD -util-linux: ADD -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: AP1 (Applications series) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -bc: OPT -diffutils: REC -jed: OPT -joe: OPT -jove: OPT -lsof: OPT -mysql: OPT -sudo: OPT -vim: OPT -# Tagfile for emacs series -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: F1 (Frequently Asked Questions) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -libidn: REC -libxml2: REC -mhash: REC -# This is a Slackware Installation Tagfile. -# -# This one comes from the N (Network/UUCP/Mail/News) series. -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# -apache: OPT -curl: OPT -gnupg: OPT -htdig: OPT -inetd: REC -lftp: OPT -lynx: OPT -mod_ssl: OPT -nail: REC -openssh: REC -openssl: REC -php: OPT -rsync: OPT -stunnel: OPT -tcpip: REC -wget: OPT -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: TCL1 (Tcl/Tk series) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: Y1 (Yaaaaaahhoooo? Games and Amusements). -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# extra -libsafe -# contrib -simplepkg -ssmtp diff --git a/templates/vserver/vserver.d/etc/apache/httpd.conf b/templates/vserver/vserver.d/etc/apache/httpd.conf deleted file mode 100644 index 7b7115d..0000000 --- a/templates/vserver/vserver.d/etc/apache/httpd.conf +++ /dev/null @@ -1,1046 +0,0 @@ -## -## httpd.conf -- Apache HTTP server configuration file -## - -# -# Based upon the NCSA server configuration files originally by Rob McCool. -# -# This is the main Apache server configuration file. It contains the -# configuration directives that give the server its instructions. -# See <URL:http://httpd.apache.org/docs/> for detailed information about -# the directives. -# -# Do NOT simply read the instructions in here without understanding -# what they do. They're here only as hints or reminders. If you are unsure -# consult the online docs. You have been warned. -# -# After this file is processed, the server will look for and process -# /etc/apache/srm.conf and then /etc/apache/access.conf -# unless you have overridden these with ResourceConfig and/or -# AccessConfig directives here. -# -# The configuration directives are grouped into three basic sections: -# 1. Directives that control the operation of the Apache server process as a -# whole (the 'global environment'). -# 2. Directives that define the parameters of the 'main' or 'default' server, -# which responds to requests that aren't handled by a virtual host. -# These directives also provide default values for the settings -# of all virtual hosts. -# 3. Settings for virtual hosts, which allow Web requests to be sent to -# different IP addresses or hostnames and have them handled by the -# same Apache server process. -# -# Configuration and logfile names: If the filenames you specify for many -# of the server's control files begin with "/" (or "drive:/" for Win32), the -# server will use that explicit path. If the filenames do *not* begin -# with "/", the value of ServerRoot is prepended -- so "logs/foo.log" -# with ServerRoot set to "/usr/local/apache" will be interpreted by the -# server as "/usr/local/apache/logs/foo.log". -# - -### Section 1: Global Environment -# -# The directives in this section affect the overall operation of Apache, -# such as the number of concurrent requests it can handle or where it -# can find its configuration files. -# - -# -# ServerType is either inetd, or standalone. Inetd mode is only supported on -# Unix platforms. -# -ServerType standalone - -# ServerTokens directive -ServerTokens ProductOnly - -# -# ServerRoot: The top of the directory tree under which the server's -# configuration, error, and log files are kept. -# -# NOTE! If you intend to place this on an NFS (or otherwise network) -# mounted filesystem then please read the LockFile documentation -# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>); -# you will save yourself a lot of trouble. -# -ServerRoot "/usr" - -# -# The LockFile directive sets the path to the lockfile used when Apache -# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or -# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at -# its default value. The main reason for changing it is if the logs -# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL -# DISK. The PID of the main server process is automatically appended to -# the filename. -# -#LockFile /var/run/httpd.lock - -# -# PidFile: The file in which the server should record its process -# identification number when it starts. -# -PidFile /var/run/httpd.pid - -# -# ScoreBoardFile: File used to store internal server process information. -# Not all architectures require this. But if yours does (you'll know because -# this file will be created when you run Apache) then you *must* ensure that -# no two invocations of Apache share the same scoreboard file. -# -ScoreBoardFile /var/run/httpd.scoreboard - -# -# In the standard configuration, the server will process httpd.conf (this -# file, specified by the -f command line option), srm.conf, and access.conf -# in that order. The latter two files are now distributed empty, as it is -# recommended that all directives be kept in a single file for simplicity. -# The commented-out values below are the built-in defaults. You can have the -# server ignore these files altogether by using "/dev/null" (for Unix) or -# "nul" (for Win32) for the arguments to the directives. -# -#ResourceConfig /etc/apache/srm.conf -#AccessConfig /etc/apache/access.conf - -# -# Timeout: The number of seconds before receives and sends time out. -# -Timeout 300 - -# -# KeepAlive: Whether or not to allow persistent connections (more than -# one request per connection). Set to "Off" to deactivate. -# -KeepAlive On - -# -# MaxKeepAliveRequests: The maximum number of requests to allow -# during a persistent connection. Set to 0 to allow an unlimited amount. -# We recommend you leave this number high, for maximum performance. -# -MaxKeepAliveRequests 100 - -# -# KeepAliveTimeout: Number of seconds to wait for the next request from the -# same client on the same connection. -# -KeepAliveTimeout 2 - -# -# Server-pool size regulation. Rather than making you guess how many -# server processes you need, Apache dynamically adapts to the load it -# sees --- that is, it tries to maintain enough server processes to -# handle the current load, plus a few spare servers to handle transient -# load spikes (e.g., multiple simultaneous requests from a single -# Netscape browser). -# -# It does this by periodically checking how many servers are waiting -# for a request. If there are fewer than MinSpareServers, it creates -# a new spare. If there are more than MaxSpareServers, some of the -# spares die off. The default values are probably OK for most sites. -# -MinSpareServers 5 -MaxSpareServers 10 - -# -# Number of servers to start initially --- should be a reasonable ballpark -# figure. -# -StartServers 5 - -# -# Limit on total number of servers running, i.e., limit on the number -# of clients who can simultaneously connect --- if this limit is ever -# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. -# It is intended mainly as a brake to keep a runaway server from taking -# the system with it as it spirals down... -# -MaxClients 150 - -# -# MaxRequestsPerChild: the number of requests each child process is -# allowed to process before the child dies. The child will exit so -# as to avoid problems after prolonged use when Apache (and maybe the -# libraries it uses) leak memory or other resources. On most systems, this -# isn't really needed, but a few (such as Solaris) do have notable leaks -# in the libraries. For these platforms, set to something like 10000 -# or so; a setting of 0 means unlimited. -# -# NOTE: This value does not include keepalive requests after the initial -# request per connection. For example, if a child process handles -# an initial request and 10 subsequent "keptalive" requests, it -# would only count as 1 request towards this limit. -# -MaxRequestsPerChild 0 - -# -# Listen: Allows you to bind Apache to specific IP addresses and/or -# ports, instead of the default. See also the <VirtualHost> -# directive. -# -#Listen 3000 -#Listen 12.34.56.78:80 - -# -# BindAddress: You can support virtual hosts with this option. This directive -# is used to tell the server which IP address to listen to. It can either -# contain "*", an IP address, or a fully qualified Internet domain name. -# See also the <VirtualHost> and Listen directives. -# -#BindAddress * - -# -# Dynamic Shared Object (DSO) Support -# -# To be able to use the functionality of a module which was built as a DSO you -# have to place corresponding `LoadModule' lines at this location so the -# directives contained in it are actually available _before_ they are used. -# Please read the file http://httpd.apache.org/docs/dso.html for more -# details about the DSO mechanism and run `httpd -l' for the list of already -# built-in (statically linked and thus always available) modules in your httpd -# binary. -# -# Note: The order in which modules are loaded is important. Don't change -# the order below without expert advice. -# -# Example: -# LoadModule foo_module libexec/mod_foo.so -LoadModule vhost_alias_module libexec/apache/mod_vhost_alias.so -#LoadModule env_module libexec/apache/mod_env.so -LoadModule define_module libexec/apache/mod_define.so -LoadModule config_log_module libexec/apache/mod_log_config.so -LoadModule mime_magic_module libexec/apache/mod_mime_magic.so -LoadModule mime_module libexec/apache/mod_mime.so -LoadModule negotiation_module libexec/apache/mod_negotiation.so -#LoadModule status_module libexec/apache/mod_status.so -#LoadModule info_module libexec/apache/mod_info.so -LoadModule includes_module libexec/apache/mod_include.so -LoadModule autoindex_module libexec/apache/mod_autoindex.so -LoadModule dir_module libexec/apache/mod_dir.so -LoadModule cgi_module libexec/apache/mod_cgi.so -#LoadModule asis_module libexec/apache/mod_asis.so -#LoadModule imap_module libexec/apache/mod_imap.so -#LoadModule action_module libexec/apache/mod_actions.so -#LoadModule speling_module libexec/apache/mod_speling.so -#LoadModule userdir_module libexec/apache/mod_userdir.so -LoadModule alias_module libexec/apache/mod_alias.so -LoadModule rewrite_module libexec/apache/mod_rewrite.so -LoadModule access_module libexec/apache/mod_access.so -LoadModule auth_module libexec/apache/mod_auth.so -LoadModule anon_auth_module libexec/apache/mod_auth_anon.so -#LoadModule dbm_auth_module libexec/apache/mod_auth_dbm.so -#LoadModule digest_module libexec/apache/mod_digest.so -LoadModule proxy_module libexec/apache/libproxy.so -LoadModule cern_meta_module libexec/apache/mod_cern_meta.so -LoadModule expires_module libexec/apache/mod_expires.so -LoadModule headers_module libexec/apache/mod_headers.so -#LoadModule usertrack_module libexec/apache/mod_usertrack.so -#LoadModule log_forensic_module libexec/apache/mod_log_forensic.so -#LoadModule unique_id_module libexec/apache/mod_unique_id.so -LoadModule setenvif_module libexec/apache/mod_setenvif.so - -# Reconstruction of the complete module list from all available modules -# (static and shared ones) to achieve correct module execution order. -# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO] -ClearModuleList -AddModule mod_vhost_alias.c -#AddModule mod_env.c -AddModule mod_define.c -AddModule mod_log_config.c -AddModule mod_mime_magic.c -AddModule mod_mime.c -AddModule mod_negotiation.c -#AddModule mod_status.c -#AddModule mod_info.c -AddModule mod_include.c -AddModule mod_autoindex.c -AddModule mod_dir.c -AddModule mod_cgi.c -#AddModule mod_asis.c -#AddModule mod_imap.c -#AddModule mod_actions.c -#AddModule mod_speling.c -#AddModule mod_userdir.c -AddModule mod_alias.c -AddModule mod_rewrite.c -AddModule mod_access.c -AddModule mod_auth.c -AddModule mod_auth_anon.c -#AddModule mod_auth_dbm.c -#AddModule mod_digest.c -AddModule mod_proxy.c -AddModule mod_cern_meta.c -AddModule mod_expires.c -AddModule mod_headers.c -#AddModule mod_usertrack.c -#AddModule mod_log_forensic.c -#AddModule mod_unique_id.c -AddModule mod_so.c -AddModule mod_setenvif.c - -# -# ExtendedStatus controls whether Apache will generate "full" status -# information (ExtendedStatus On) or just basic information (ExtendedStatus -# Off) when the "server-status" handler is called. The default is Off. -# -#ExtendedStatus On - -### Section 2: 'Main' server configuration -# -# The directives in this section set up the values used by the 'main' -# server, which responds to any requests that aren't handled by a -# <VirtualHost> definition. These values also provide defaults for -# any <VirtualHost> containers you may define later in the file. -# -# All of these directives may appear inside <VirtualHost> containers, -# in which case these default settings will be overridden for the -# virtual host being defined. -# - -# -# If your ServerType directive (set earlier in the 'Global Environment' -# section) is set to "inetd", the next few directives don't have any -# effect since their settings are defined by the inetd configuration. -# Skip ahead to the ServerAdmin directive. -# - -# -# Port: The port to which the standalone server listens. For -# ports < 1023, you will need httpd to be run as root initially. -# -Port 80 - -# -# If you wish httpd to run as a different user or group, you must run -# httpd as root initially and it will switch. -# -# User/Group: The name (or #number) of the user/group to run httpd as. -# . On SCO (ODT 3) use "User nouser" and "Group nogroup". -# . On HPUX you may not be able to use shared memory as nobody, and the -# suggested workaround is to create a user www and use that user. -# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) -# when the value of (unsigned)Group is above 60000; -# don't use Group "#-1" on these systems! -# -User nobody -Group nobody - -# -# ServerAdmin: Your address, where problems with the server should be -# e-mailed. This address appears on some server-generated pages, such -# as error documents. -# -ServerAdmin root@midas.slackware.lan - -# -# ServerName allows you to set a host name which is sent back to clients for -# your server if it's different than the one the program would get (i.e., use -# "www" instead of the host's real name). -# -# Note: You cannot just invent host names and hope they work. The name you -# define here must be a valid DNS name for your host. If you don't understand -# this, ask your network administrator. -# If your host doesn't have a registered DNS name, enter its IP address here. -# You will have to access it by its address (e.g., http://123.45.67.89/) -# anyway, and this will make redirections work in a sensible way. -# -# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your -# machine always knows itself by this address. If you use Apache strictly for -# local testing and development, you may use 127.0.0.1 as the server name. -# -#ServerName www.example.com - -# -# DocumentRoot: The directory out of which you will serve your -# documents. By default, all requests are taken from this directory, but -# symbolic links and aliases may be used to point to other locations. -# -DocumentRoot "/var/www/htdocs" - -# -# Each directory to which Apache has access, can be configured with respect -# to which services and features are allowed and/or disabled in that -# directory (and its subdirectories). -# -# First, we configure the "default" to be a very restrictive set of -# permissions. -# -<Directory /> - Options FollowSymLinks - AllowOverride None -</Directory> - -# -# Note that from this point forward you must specifically allow -# particular features to be enabled - so if something's not working as -# you might expect, make sure that you have specifically enabled it -# below. -# - -# -# This should be changed to whatever you set DocumentRoot to. -# -<Directory "/var/www/htdocs"> - -# -# This may also be "None", "All", or any combination of "Indexes", -# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". -# -# Note that "MultiViews" must be named *explicitly* --- "Options All" -# doesn't give it to you. -# - Options Indexes FollowSymLinks MultiViews - -# -# This controls which options the .htaccess files in directories can -# override. Can also be "All", or any combination of "Options", "FileInfo", -# "AuthConfig", and "Limit" -# - AllowOverride None - -# -# Controls who can get stuff from this server. -# - Order allow,deny - Allow from all -</Directory> - -# -# UserDir: The name of the directory which is appended onto a user's home -# directory if a ~user request is received. -# -<IfModule mod_userdir.c> - UserDir public_html -</IfModule> - -# -# Control access to UserDir directories. The following is an example -# for a site where these directories are restricted to read-only. -# -#<Directory /home/*/public_html> -# AllowOverride FileInfo AuthConfig Limit -# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec -# <Limit GET POST OPTIONS PROPFIND> -# Order allow,deny -# Allow from all -# </Limit> -# <LimitExcept GET POST OPTIONS PROPFIND> -# Order deny,allow -# Deny from all -# </LimitExcept> -#</Directory> - -# -# DirectoryIndex: Name of the file or files to use as a pre-written HTML -# directory index. Separate multiple entries with spaces. -# -<IfModule mod_dir.c> - DirectoryIndex index.html -</IfModule> - -# -# AccessFileName: The name of the file to look for in each directory -# for access control information. -# -AccessFileName .htaccess - -# -# The following lines prevent .htaccess files from being viewed by -# Web clients. Since .htaccess files often contain authorization -# information, access is disallowed for security reasons. Comment -# these lines out if you want Web visitors to see the contents of -# .htaccess files. If you change the AccessFileName directive above, -# be sure to make the corresponding changes here. -# -# Also, folks tend to use names such as .htpasswd for password -# files, so this will protect those as well. -# -<Files ~ "^\.ht"> - Order allow,deny - Deny from all - Satisfy All -</Files> - -# -# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each -# document that was negotiated on the basis of content. This asks proxy -# servers not to cache the document. Uncommenting the following line disables -# this behavior, and proxies will be allowed to cache the documents. -# -#CacheNegotiatedDocs - -# -# UseCanonicalName: (new for 1.3) With this setting turned on, whenever -# Apache needs to construct a self-referencing URL (a URL that refers back -# to the server the response is coming from) it will use ServerName and -# Port to form a "canonical" name. With this setting off, Apache will -# use the hostname:port that the client supplied, when possible. This -# also affects SERVER_NAME and SERVER_PORT in CGI scripts. -# -UseCanonicalName On - -# -# TypesConfig describes where the mime.types file (or equivalent) is -# to be found. -# -<IfModule mod_mime.c> - TypesConfig /etc/apache/mime.types -</IfModule> - -# -# DefaultType is the default MIME type the server will use for a document -# if it cannot otherwise determine one, such as from filename extensions. -# If your server contains mostly text or HTML documents, "text/plain" is -# a good value. If most of your content is binary, such as applications -# or images, you may want to use "application/octet-stream" instead to -# keep browsers from trying to display binary files as though they are -# text. -# -DefaultType text/plain - -# -# The mod_mime_magic module allows the server to use various hints from the -# contents of the file itself to determine its type. The MIMEMagicFile -# directive tells the module where the hint definitions are located. -# mod_mime_magic is not part of the default server (you have to add -# it yourself with a LoadModule [see the DSO paragraph in the 'Global -# Environment' section], or recompile the server and include mod_mime_magic -# as part of the configuration), so it's enclosed in an <IfModule> container. -# This means that the MIMEMagicFile directive will only be processed if the -# module is part of the server. -# -<IfModule mod_mime_magic.c> - MIMEMagicFile /etc/apache/magic -</IfModule> - -# -# HostnameLookups: Log the names of clients or just their IP addresses -# e.g., www.apache.org (on) or 204.62.129.132 (off). -# The default is off because it'd be overall better for the net if people -# had to knowingly turn this feature on, since enabling it means that -# each client request will result in AT LEAST one lookup request to the -# nameserver. -# -HostnameLookups Off - -# -# ErrorLog: The location of the error log file. -# If you do not specify an ErrorLog directive within a <VirtualHost> -# container, error messages relating to that virtual host will be -# logged here. If you *do* define an error logfile for a <VirtualHost> -# container, that host's errors will be logged there and not here. -# -ErrorLog "| /usr/bin/error-log.sh /var/log/apache/error_log" - -# -# LogLevel: Control the number of messages logged to the error_log. -# Possible values include: debug, info, notice, warn, error, crit, -# alert, emerg. -# -LogLevel warn - -# -# The following directives define some format nicknames for use with -# a CustomLog directive (see below). -# -LogFormat "%l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined -LogFormat "%l %u %t \"%r\" %>s %b" common -LogFormat "%{Referer}i -> %U" referer -LogFormat "%{User-agent}i" agent - -# -# The location and format of the access logfile (Common Logfile Format). -# If you do not define any access logfiles within a <VirtualHost> -# container, they will be logged here. Contrariwise, if you *do* -# define per-<VirtualHost> access logfiles, transactions will be -# logged therein and *not* in this file. -# -CustomLog /var/log/apache/access_log common - -# -# If you would like to have agent and referer logfiles, uncomment the -# following directives. -# -#CustomLog /var/log/apache/referer_log referer -#CustomLog /var/log/apache/agent_log agent - -# -# If you prefer a single logfile with access, agent, and referer information -# (Combined Logfile Format) you can use the following directive. -# -#CustomLog /var/log/apache/access_log combined - -# -# Optionally add a line containing the server version and virtual host -# name to server-generated pages (error documents, FTP directory listings, -# mod_status and mod_info output etc., but not CGI generated documents). -# Set to "EMail" to also include a mailto: link to the ServerAdmin. -# Set to one of: On | Off | EMail -# -ServerSignature Off - -# EBCDIC configuration: -# (only for mainframes using the EBCDIC codeset, currently one of: -# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!! -# The following default configuration assumes that "text files" -# are stored in EBCDIC (so that you can operate on them using the -# normal POSIX tools like grep and sort) while "binary files" are -# stored with identical octets as on an ASCII machine. -# -# The directives are evaluated in configuration file order, with -# the EBCDICConvert directives applied before EBCDICConvertByType. -# -# If you want to have ASCII HTML documents and EBCDIC HTML documents -# at the same time, you can use the file extension to force -# conversion off for the ASCII documents: -# > AddType text/html .ahtml -# > EBCDICConvert Off=InOut .ahtml -# -# EBCDICConvertByType On=InOut text/* message/* multipart/* -# EBCDICConvertByType On=In application/x-www-form-urlencoded -# EBCDICConvertByType On=InOut application/postscript model/vrml -# EBCDICConvertByType Off=InOut */* - - -# -# Aliases: Add here as many aliases as you need (with no limit). The format is -# Alias fakename realname -# -<IfModule mod_alias.c> - - # - # Note that if you include a trailing / on fakename then the server will - # require it to be present in the URL. So "/icons" isn't aliased in this - # example, only "/icons/". If the fakename is slash-terminated, then the - # realname must also be slash terminated, and if the fakename omits the - # trailing slash, the realname must also omit it. - # - Alias /icons/ "/var/www/icons/" - - <Directory "/var/www/icons"> - Options Indexes MultiViews - AllowOverride None - Order allow,deny - Allow from all - </Directory> - - # This Alias will project the on-line documentation tree under /manual/ - # even if you change the DocumentRoot. Comment it if you don't want to - # provide access to the on-line documentation. - # - Alias /manual/ "/var/www/htdocs/manual/" - - <Directory "/var/www/htdocs/manual"> - Options Indexes FollowSymlinks MultiViews - AllowOverride None - Order allow,deny - Allow from all - </Directory> - - # - # ScriptAlias: This controls which directories contain server scripts. - # ScriptAliases are essentially the same as Aliases, except that - # documents in the realname directory are treated as applications and - # run by the server when requested rather than as documents sent to the client. - # The same rules about trailing "/" apply to ScriptAlias directives as to - # Alias. - # - ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" - - # - # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased - # CGI directory exists, if you have that configured. - # - <Directory "/var/www/cgi-bin"> - AllowOverride None - Options None - Order allow,deny - Allow from all - </Directory> - -</IfModule> -# End of aliases. - -# -# Redirect allows you to tell clients about documents which used to exist in -# your server's namespace, but do not anymore. This allows you to tell the -# clients where to look for the relocated document. -# Format: Redirect old-URI new-URL -# - -# -# Directives controlling the display of server-generated directory listings. -# -<IfModule mod_autoindex.c> - - # - # FancyIndexing is whether you want fancy directory indexing or standard - # - IndexOptions FancyIndexing - - # - # AddIcon* directives tell the server which icon to show for different - # files or filename extensions. These are only displayed for - # FancyIndexed directories. - # - AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip - - AddIconByType (TXT,/icons/text.gif) text/* - AddIconByType (IMG,/icons/image2.gif) image/* - AddIconByType (SND,/icons/sound2.gif) audio/* - AddIconByType (VID,/icons/movie.gif) video/* - - AddIcon /icons/binary.gif .bin .exe - AddIcon /icons/binhex.gif .hqx - AddIcon /icons/tar.gif .tar - AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv - AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip - AddIcon /icons/a.gif .ps .ai .eps - AddIcon /icons/layout.gif .html .shtml .htm .pdf - AddIcon /icons/text.gif .txt - AddIcon /icons/c.gif .c - AddIcon /icons/p.gif .pl .py - AddIcon /icons/f.gif .for - AddIcon /icons/dvi.gif .dvi - AddIcon /icons/uuencoded.gif .uu - AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl - AddIcon /icons/tex.gif .tex - AddIcon /icons/bomb.gif core - - AddIcon /icons/back.gif .. - AddIcon /icons/hand.right.gif README - AddIcon /icons/folder.gif ^^DIRECTORY^^ - AddIcon /icons/blank.gif ^^BLANKICON^^ - - # - # DefaultIcon is which icon to show for files which do not have an icon - # explicitly set. - # - DefaultIcon /icons/unknown.gif - - # - # AddDescription allows you to place a short description after a file in - # server-generated indexes. These are only displayed for FancyIndexed - # directories. - # Format: AddDescription "description" filename - # - #AddDescription "GZIP compressed document" .gz - #AddDescription "tar archive" .tar - #AddDescription "GZIP compressed tar archive" .tgz - - # - # ReadmeName is the name of the README file the server will look for by - # default, and append to directory listings. - # - # HeaderName is the name of a file which should be prepended to - # directory indexes. - # - ReadmeName README.html - HeaderName HEADER.html - - # - # IndexIgnore is a set of filenames which directory indexing should ignore - # and not include in the listing. Shell-style wildcarding is permitted. - # - IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t - -</IfModule> -# End of indexing directives. - -# -# Document types. -# -<IfModule mod_mime.c> - - # - # AddLanguage allows you to specify the language of a document. You can - # then use content negotiation to give a browser a file in a language - # it can understand. - # - # Note 1: The suffix does not have to be the same as the language - # keyword --- those with documents in Polish (whose net-standard - # language code is pl) may wish to use "AddLanguage pl .po" to - # avoid the ambiguity with the common suffix for perl scripts. - # - # Note 2: The example entries below illustrate that in quite - # some cases the two character 'Language' abbreviation is not - # identical to the two character 'Country' code for its country, - # E.g. 'Danmark/dk' versus 'Danish/da'. - # - # Note 3: In the case of 'ltz' we violate the RFC by using a three char - # specifier. But there is 'work in progress' to fix this and get - # the reference data for rfc1766 cleaned up. - # - # Danish (da) - Dutch (nl) - English (en) - Estonian (ee) - # French (fr) - German (de) - Greek-Modern (el) - # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn) - # Portugese (pt) - Luxembourgeois* (ltz) - # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs) - # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) - # Russian (ru) - # - AddLanguage da .dk - AddLanguage nl .nl - AddLanguage en .en - AddLanguage et .ee - AddLanguage fr .fr - AddLanguage de .de - AddLanguage el .el - AddLanguage he .he - AddCharset ISO-8859-8 .iso8859-8 - AddLanguage it .it - AddLanguage ja .ja - AddCharset ISO-2022-JP .jis - AddLanguage kr .kr - AddCharset ISO-2022-KR .iso-kr - AddLanguage nn .nn - AddLanguage no .no - AddLanguage pl .po - AddCharset ISO-8859-2 .iso-pl - AddLanguage pt .pt - AddLanguage pt-br .pt-br - AddLanguage ltz .lu - AddLanguage ca .ca - AddLanguage es .es - AddLanguage sv .sv - AddLanguage cs .cz .cs - AddLanguage ru .ru - AddLanguage zh-TW .zh-tw - AddCharset Big5 .Big5 .big5 - AddCharset WINDOWS-1251 .cp-1251 - AddCharset CP866 .cp866 - AddCharset ISO-8859-5 .iso-ru - AddCharset KOI8-R .koi8-r - AddCharset UCS-2 .ucs2 - AddCharset UCS-4 .ucs4 - AddCharset UTF-8 .utf8 - - # LanguagePriority allows you to give precedence to some languages - # in case of a tie during content negotiation. - # - # Just list the languages in decreasing order of preference. We have - # more or less alphabetized them here. You probably want to change this. - # - <IfModule mod_negotiation.c> - LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw - </IfModule> - - # - # AddType allows you to tweak mime.types without actually editing it, or to - # make certain files to be certain types. - # - AddType application/x-tar .tgz - - # - # AddEncoding allows you to have certain browsers uncompress - # information on the fly. Note: Not all browsers support this. - # Despite the name similarity, the following Add* directives have nothing - # to do with the FancyIndexing customization directives above. - # - AddEncoding x-compress .Z - AddEncoding x-gzip .gz .tgz - # - # If the AddEncoding directives above are commented-out, then you - # probably should define those extensions to indicate media types: - # - #AddType application/x-compress .Z - #AddType application/x-gzip .gz .tgz - - # - # AddHandler allows you to map certain file extensions to "handlers", - # actions unrelated to filetype. These can be either built into the server - # or added with the Action command (see below) - # - # If you want to use server side includes, or CGI outside - # ScriptAliased directories, uncomment the following lines. - # - # To use CGI scripts: - # - #AddHandler cgi-script .cgi - - # - # To use server-parsed HTML files - # - #AddType text/html .shtml - #AddHandler server-parsed .shtml - - # - # Uncomment the following line to enable Apache's send-asis HTTP file - # feature - # - #AddHandler send-as-is asis - - # - # If you wish to use server-parsed imagemap files, use - # - #AddHandler imap-file map - - # - # To enable type maps, you might want to use - # - #AddHandler type-map var - -</IfModule> -# End of document types. - -# -# Action lets you define media types that will execute a script whenever -# a matching file is called. This eliminates the need for repeated URL -# pathnames for oft-used CGI file processors. -# Format: Action media/type /cgi-script/location -# Format: Action handler-name /cgi-script/location -# - -# -# MetaDir: specifies the name of the directory in which Apache can find -# meta information files. These files contain additional HTTP headers -# to include when sending the document -# -#MetaDir .web - -# -# MetaSuffix: specifies the file name suffix for the file containing the -# meta information. -# -#MetaSuffix .meta - -# -# Customizable error response (Apache style) -# these come in three flavors -# -# 1) plain text -ErrorDocument 500 /missing.html -# n.b. the single leading (") marks it as text, it does not get output -# -# 2) local redirects -ErrorDocument 404 /missing.html -# to redirect to local URL /missing.html -#ErrorDocument 404 /cgi-bin/missing_handler.pl -# N.B.: You can redirect to a script or a document using server-side-includes. -# -# 3) external redirects -ErrorDocument 402 /missing.html -# N.B.: Many of the environment variables associated with the original -# request will *not* be available to such a script. - -# -# Customize behaviour based on the browser -# -<IfModule mod_setenvif.c> - - # - # The following directives modify normal HTTP response behavior. - # The first directive disables keepalive for Netscape 2.x and browsers that - # spoof it. There are known problems with these browser implementations. - # The second directive is for Microsoft Internet Explorer 4.0b2 - # which has a broken HTTP/1.1 implementation and does not properly - # support keepalive when it is used on 301 or 302 (redirect) responses. - # - BrowserMatch "Mozilla/2" nokeepalive - BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 - - # - # The following directive disables HTTP/1.1 responses to browsers which - # are in violation of the HTTP/1.0 spec by not being able to grok a - # basic 1.1 response. - # - BrowserMatch "RealPlayer 4\.0" force-response-1.0 - BrowserMatch "Java/1\.0" force-response-1.0 - BrowserMatch "JDK/1\.0" force-response-1.0 - -</IfModule> -# End of browser customization directives - -# -# Allow server status reports, with the URL of http://servername/server-status -# Change the ".example.com" to match your domain to enable. -# -#<Location /server-status> -# SetHandler server-status -# Order deny,allow -# Deny from all -# Allow from .example.com -#</Location> - -# -# Allow remote server configuration reports, with the URL of -# http://servername/server-info (requires that mod_info.c be loaded). -# Change the ".example.com" to match your domain to enable. -# -#<Location /server-info> -# SetHandler server-info -# Order deny,allow -# Deny from all -# Allow from .example.com -#</Location> - -# -# There have been reports of people trying to abuse an old bug from pre-1.1 -# days. This bug involved a CGI script distributed as a part of Apache. -# By uncommenting these lines you can redirect these attacks to a logging -# script on phf.apache.org. Or, you can record them yourself, using the script -# support/phf_abuse_log.cgi. -# -#<Location /cgi-bin/phf*> -# Deny from all -# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi -#</Location> - -### Section 3: Virtual Hosts -# -# VirtualHost: If you want to maintain multiple domains/hostnames on your -# machine you can setup VirtualHost containers for them. Most configurations -# use only name-based virtual hosts so the server doesn't need to worry about -# IP addresses. This is indicated by the asterisks in the directives below. -# -# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/> -# for further details before you try to setup virtual hosts. -# -# You may use the command line option '-S' to verify your virtual host -# configuration. - -# -# Use name-based virtual hosting. -# -#NameVirtualHost *:80 - -# -# VirtualHost example: -# Almost any Apache directive may go into a VirtualHost container. -# The first VirtualHost section is used for requests without a known -# server name. -# -#<VirtualHost *:80> -# ServerAdmin webmaster@dummy-host.example.com -# DocumentRoot /www/docs/dummy-host.example.com -# ServerName dummy-host.example.com -# ErrorLog logs/dummy-host.example.com-error_log -# CustomLog logs/dummy-host.example.com-access_log common -#</VirtualHost> - -# By default, all external Apache modules are disabled. To enable a particular -# module for Apache, make sure the necessary packages are installed. Then -# uncomment the appropriate Include line below, save the file, and restart -# Apache. Note that some modules may need additional configuration steps. For -# example, mod_ssl requires a site certificate which you may need to generate. -# -# Lastly, if you remove a module package, be sure to edit this file and comment -# out the appropriate Include line. - -# ==> mod_php configuration settings <== -# -# PACKAGES REQUIRED: openssl-solibs (A series) and/or openssl (N series), -# mysql (AP series), gmp (L series), mhash (L series), -# and apache (N series) -# -#Include /etc/apache/mod_php.conf - -# ==> mod_ssl configuration settings <== -# -# PACKAGES REQUIRED: apache (N series) and openssl (N series) -# -#Include /etc/apache/mod_ssl.conf - -#NameVirtualHost VSERVER_IP - -Include /etc/apache/vhosts diff --git a/templates/vserver/vserver.d/etc/apache/php.ini b/templates/vserver/vserver.d/etc/apache/php.ini deleted file mode 100644 index e6cddef..0000000 --- a/templates/vserver/vserver.d/etc/apache/php.ini +++ /dev/null @@ -1,1122 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; -; This is the recommended, PHP 4-style version of the php.ini-dist file. It -; sets some non standard settings, that make PHP more efficient, more secure, -; and encourage cleaner coding. -; The price is that with these settings, PHP may be incompatible with some -; applications, and sometimes, more difficult to develop with. Using this -; file is warmly recommended for production sites. As all of the changes from -; the standard settings are thoroughly documented, you can go over each one, -; and decide whether you want to use it or not. -; -; For general information about the php.ini file, please consult the php.ini-dist -; file, included in your PHP distribution. -; -; This file is different from the php.ini-dist file in the fact that it features -; different values for several directives, in order to improve performance, while -; possibly breaking compatibility with the standard out-of-the-box behavior of -; PHP 3. Please make sure you read what's different, and modify your scripts -; accordingly, if you decide to use this file instead. -; -; - register_globals = Off [Security, Performance] -; Global variables are no longer registered for input data (POST, GET, cookies, -; environment and other server variables). Instead of using $foo, you must use -; you can use $_REQUEST["foo"] (includes any variable that arrives through the -; request, namely, POST, GET and cookie variables), or use one of the specific -; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending -; on where the input originates. Also, you can look at the -; import_request_variables() function. -; Note that register_globals is going to be depracated (i.e., turned off by -; default) in the next version of PHP, because it often leads to security bugs. -; Read http://php.net/manual/en/security.registerglobals.php for further -; information. -; - display_errors = Off [Security] -; With this directive set to off, errors that occur during the execution of -; scripts will no longer be displayed as a part of the script output, and thus, -; will no longer be exposed to remote users. With some errors, the error message -; content may expose information about your script, web server, or database -; server that may be exploitable for hacking. Production sites should have this -; directive set to off. -; - log_errors = On [Security] -; This directive complements the above one. Any errors that occur during the -; execution of your script will be logged (typically, to your server's error log, -; but can be configured in several ways). Along with setting display_errors to off, -; this setup gives you the ability to fully understand what may have gone wrong, -; without exposing any sensitive information to remote users. -; - output_buffering = 4096 [Performance] -; Set a 4KB output buffer. Enabling output buffering typically results in less -; writes, and sometimes less packets sent on the wire, which can often lead to -; better performance. The gain this directive actually yields greatly depends -; on which Web server you're working with, and what kind of scripts you're using. -; - register_argc_argv = Off [Performance] -; Disables registration of the somewhat redundant $argv and $argc global -; variables. -; - magic_quotes_gpc = Off [Performance] -; Input data is no longer escaped with slashes so that it can be sent into -; SQL databases without further manipulation. Instead, you should use the -; function addslashes() on each input element you wish to send to a database. -; - variables_order = "GPCS" [Performance] -; The environment variables are not hashed into the $HTTP_ENV_VARS[]. To access -; environment variables, you can use getenv() instead. -; - error_reporting = E_ALL [Code Cleanliness, Security(?)] -; By default, PHP surpresses errors of type E_NOTICE. These error messages -; are emitted for non-critical errors, but that could be a symptom of a bigger -; problem. Most notably, this will cause error messages about the use -; of uninitialized variables to be displayed. -; - allow_call_time_pass_reference = Off [Code cleanliness] -; It's not possible to decide to force a variable to be passed by reference -; when calling a function. The PHP 4 style to do this is by making the -; function require the relevant argument by reference. - - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -engine = On - -; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized. -; NOTE: Using short tags should be avoided when developing applications or -; libraries that are meant for redistribution, or deployment on PHP -; servers which are not under your control, because short tags may not -; be supported on the target server. For portable, redistributable code, -; be sure not to use short tags. -short_open_tag = On - -; Allow ASP-style <% %> tags. -asp_tags = Off - -; The number of significant digits displayed in floating point numbers. -precision = 14 - -; Enforce year 2000 compliance (will cause problems with non-compliant browsers) -y2k_compliance = On - -; Output buffering allows you to send header lines (including cookies) even -; after you send body content, at the price of slowing PHP's output layer a -; bit. You can enable output buffering during runtime by calling the output -; buffering functions. You can also enable output buffering for all files by -; setting this directive to On. If you wish to limit the size of the buffer -; to a certain size - you can use a maximum number of bytes instead of 'On', as -; a value for this directive (e.g., output_buffering=4096). -output_buffering = 4096 - -; You can redirect all of the output of your scripts to a function. For -; example, if you set output_handler to "mb_output_handler", character -; encoding will be transparently converted to the specified encoding. -; Setting any output handler automatically turns on output buffering. -; Note: People who wrote portable scripts should not depend on this ini -; directive. Instead, explicitly set the output handler using ob_start(). -; Using this ini directive may cause problems unless you know what script -; is doing. -; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" -; and you cannot use both "ob_gzhandler" and "zlib.output_compression". -;output_handler = - -; Transparent output compression using the zlib library -; Valid values for this option are 'off', 'on', or a specific buffer size -; to be used for compression (default is 4KB) -; Note: Resulting chunk size may vary due to nature of compression. PHP -; outputs chunks that are few handreds bytes each as a result of compression. -; If you want larger chunk size for better performence, enable output_buffering -; also. -; Note: output_handler must be empty if this is set 'On' !!!! -; Instead you must use zlib.output_handler. -zlib.output_compression = Off - -; You cannot specify additional output handlers if zlib.output_compression -; is activated here. This setting does the same as output_handler but in -; a different order. -;zlib.output_handler = - -; Implicit flush tells PHP to tell the output layer to flush itself -; automatically after every output block. This is equivalent to calling the -; PHP function flush() after each and every call to print() or echo() and each -; and every HTML block. Turning this option on has serious performance -; implications and is generally recommended for debugging purposes only. -implicit_flush = Off - -; The unserialize callback function will be called (with the undefined class' -; name as parameter), if the unserializer finds an undefined class -; which should be instanciated. -; A warning appears if the specified function is not defined, or if the -; function doesn't include/implement the missing class. -; So only set this entry, if you really want to implement such a -; callback-function. -unserialize_callback_func= - -; When floats & doubles are serialized store serialize_precision significant -; digits after the floating point. The default value ensures that when floats -; are decoded with unserialize, the data will remain the same. -serialize_precision = 100 - -; Whether to enable the ability to force arguments to be passed by reference -; at function call time. This method is deprecated and is likely to be -; unsupported in future versions of PHP/Zend. The encouraged method of -; specifying which arguments should be passed by reference is in the function -; declaration. You're encouraged to try and turn this option Off and make -; sure your scripts work properly with it in order to ensure they will work -; with future versions of the language (you will receive a warning each time -; you use this feature, and the argument will be passed by value instead of by -; reference). -allow_call_time_pass_reference = Off - -; -; Safe Mode -; -safe_mode = Off - -; By default, Safe Mode does a UID compare check when -; opening files. If you want to relax this to a GID compare, -; then turn on safe_mode_gid. -safe_mode_gid = Off - -; When safe_mode is on, UID/GID checks are bypassed when -; including files from this directory and its subdirectories. -; (directory must also be in include_path or full path must -; be used when including) -safe_mode_include_dir = - -; When safe_mode is on, only executables located in the safe_mode_exec_dir -; will be allowed to be executed via the exec family of functions. -safe_mode_exec_dir = - -; Setting certain environment variables may be a potential security breach. -; This directive contains a comma-delimited list of prefixes. In Safe Mode, -; the user may only alter environment variables whose names begin with the -; prefixes supplied here. By default, users will only be able to set -; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). -; -; Note: If this directive is empty, PHP will let the user modify ANY -; environment variable! -safe_mode_allowed_env_vars = PHP_ - -; This directive contains a comma-delimited list of environment variables that -; the end user won't be able to change using putenv(). These variables will be -; protected even if safe_mode_allowed_env_vars is set to allow to change them. -safe_mode_protected_env_vars = LD_LIBRARY_PATH - -; open_basedir, if set, limits all file operations to the defined directory -; and below. This directive makes most sense if used in a per-directory -; or per-virtualhost web server configuration file. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -;open_basedir = - -; This directive allows you to disable certain functions for security reasons. -; It receives a comma-delimited list of function names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -disable_functions = - -; This directive allows you to disable certain classes for security reasons. -; It receives a comma-delimited list of class names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -disable_classes = - -; Colors for Syntax Highlighting mode. Anything that's acceptable in -; <font color="??????"> would work. -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.bg = #FFFFFF -;highlight.default = #0000BB -;highlight.html = #000000 - - -; -; Misc -; -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -expose_php = On - - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -max_execution_time = 30 ; Maximum execution time of each script, in seconds -max_input_time = 60 ; Maximum amount of time each script may spend parsing request data -memory_limit = 8M ; Maximum amount of memory a script may consume (8MB) - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; error_reporting is a bit-field. Or each number up to get desired error -; reporting level -; E_ALL - All errors and warnings -; E_ERROR - fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it's automatically initialized to an -; empty string) -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; -; Examples: -; -; - Show all errors, except for notices -; -;error_reporting = E_ALL & ~E_NOTICE -; -; - Show only errors -; -;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR -; -; - Show all errors -; -error_reporting = E_ALL - -; Print out errors (as a part of the output). For production web sites, -; you're strongly encouraged to turn this feature off, and use error logging -; instead (see below). Keeping display_errors enabled on a production web site -; may reveal security information to end users, such as file paths on your Web -; server, your database schema or other information. -display_errors = Off - -; Even when display_errors is on, errors that occur during PHP's startup -; sequence are not displayed. It's strongly recommended to keep -; display_startup_errors off, except for when debugging. -display_startup_errors = Off - -; Log errors into a log file (server-specific log, stderr, or error_log (below)) -; As stated above, you're strongly advised to use error logging in place of -; error displaying on production web sites. -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line until ignore_repeated_source is set true. -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; sourcelines. -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -report_memleaks = On - -; Store the last error/warning message in $php_errormsg (boolean). -track_errors = Off - -; Disable the inclusion of HTML tags in error messages. -;html_errors = Off - -; If html_errors is set On PHP produces clickable error messages that direct -; to a page describing the error or function causing the error in detail. -; You can download a copy of the PHP manual from http://www.php.net/docs.php -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. -;docref_root = "/phpmanual/" -;docref_ext = .html - -; String to output before an error message. -;error_prepend_string = "<font color=ff0000>" - -; String to output after an error message. -;error_append_string = "</font>" - -; Log errors to specified file. -;error_log = filename - -; Log errors to syslog (Event Log on NT, not valid in Windows 95). -;error_log = syslog - - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; -; -; Note - track_vars is ALWAYS enabled as of PHP 4.0.3 - -; The separator used in PHP generated URLs to separate arguments. -; Default is "&". -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; Default is "&". -; NOTE: Every character in this directive is considered as separator! -;arg_separator.input = ";&" - -; This directive describes the order in which PHP registers GET, POST, Cookie, -; Environment and Built-in variables (G, P, C, E & S respectively, often -; referred to as EGPCS or GPC). Registration is done from left to right, newer -; values override older values. -variables_order = "GPCS" - -; Whether or not to register the EGPCS variables as global variables. You may -; want to turn this off if you don't want to clutter your scripts' global scope -; with user data. This makes most sense when coupled with track_vars - in which -; case you can access all of the GPC variables through the $HTTP_*_VARS[], -; variables. -; -; You should do your best to write your scripts so that they do not require -; register_globals to be on; Using form variables as globals can easily lead -; to possible security problems, if the code is not very well thought of. -register_globals = Off - -; This directive tells PHP whether to declare the argv&argc variables (that -; would contain the GET information). If you don't use these variables, you -; should turn it off for increased performance. -register_argc_argv = Off - -; Maximum size of POST data that PHP will accept. -post_max_size = 8M - -; This directive is deprecated. Use variables_order instead. -gpc_order = "GPC" - -; Magic quotes -; - -; Magic quotes for incoming GET/POST/Cookie data. -magic_quotes_gpc = Off - -; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. -magic_quotes_runtime = Off - -; Use Sybase-style magic quotes (escape ' with '' instead of \'). -magic_quotes_sybase = Off - -; Automatically add files before or after any PHP document. -auto_prepend_file = -auto_append_file = - -; As of 4.0b4, PHP always outputs a character encoding by default in -; the Content-type: header. To disable sending of the charset, simply -; set it to be empty. -; -; PHP's built-in default is text/html -default_mimetype = "text/html" -;default_charset = "iso-8859-1" - -; Always populate the $HTTP_RAW_POST_DATA variable. -;always_populate_raw_post_data = On - - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -;include_path = ".:/php/includes" -; -; Windows: "\path1;\path2" -;include_path = ".;c:\php\includes" - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -doc_root = - -; The directory under which PHP opens the script using /~usernamem used only -; if nonempty. -user_dir = - -; Directory in which the loadable extensions (modules) reside. -; extension_dir = "./" -extension_dir = "/usr/lib/php/extensions/" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -enable_dl = On - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. -; cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; cgi.redirect_status_env = ; - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is zero. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; cgi.fix_pathinfo=1 - -; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; fastcgi.impersonate = 1; - -; Disable logging through FastCGI connection -; fastcgi.log = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If it's set 0 PHP sends Status: header that -; is supported by Apache. When this option is set to 1 PHP will send -; RFC2616 compliant header. -; Default is zero. -;cgi.rfc2616_headers = 0 - - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -upload_max_filesize = 10M - - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -allow_url_fopen = On - -; Define the anonymous ftp password (your email address) -;from="john@doe.com" - -; Define the user agent for php to send -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -default_socket_timeout = 60 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; auto_detect_line_endings = Off - - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; -; -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename.extension -; -; For example, on Windows: -; -; extension=msql.dll -; -; ... or under UNIX: -; -; extension=msql.so -; -; Note that it should be the name of the module only; no directory information -; needs to go here. Specify the location of the extension with the -; extension_dir directive above. -; -; Load the MySQL module by default. Comment this out if you don't use MySQL. -extension=mysql.so - -; Load the gettext extension by default. Comment this out if you don't have the -; gettext shared library installed. -extension=gettext.so - -;Windows Extensions -;Note that MySQL and ODBC support is now built in, so no dll is needed for it. -; -;extension=php_mbstring.dll -;extension=php_bz2.dll -;extension=php_cpdf.dll -;extension=php_crack.dll -;extension=php_curl.dll -;extension=php_db.dll -;extension=php_dba.dll -;extension=php_dbase.dll -;extension=php_dbx.dll -;extension=php_domxml.dll -;extension=php_exif.dll -;extension=php_fdf.dll -;extension=php_filepro.dll -;extension=php_gd2.dll -;extension=php_gettext.dll -;extension=php_hyperwave.dll -;extension=php_iconv.dll -;extension=php_ifx.dll -;extension=php_iisfunc.dll -;extension=php_imap.dll -;extension=php_interbase.dll -;extension=php_java.dll -;extension=php_ldap.dll -;extension=php_mcrypt.dll -;extension=php_mhash.dll -;extension=php_mime_magic.dll -;extension=php_ming.dll -;extension=php_mssql.dll -;extension=php_msql.dll -;extension=php_oci8.dll -;extension=php_openssl.dll -;extension=php_oracle.dll -;extension=php_pdf.dll -;extension=php_pgsql.dll -;extension=php_printer.dll -;extension=php_shmop.dll -;extension=php_snmp.dll -;extension=php_sockets.dll -;extension=php_sybase_ct.dll -;extension=php_w32api.dll -;extension=php_xmlrpc.dll -;extension=php_xslt.dll -;extension=php_yaz.dll -;extension=php_zip.dll - - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[Syslog] -; Whether or not to define the various syslog variables (e.g. $LOG_PID, -; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In -; runtime, you can define these variables by calling define_syslog_variables(). -define_syslog_variables = Off - -[mail function] -; For Win32 only. -SMTP = localhost -smtp_port = 25 - -; For Win32 only. -;sendmail_from = me@example.com - -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -;sendmail_path = - -[Java] -;java.class.path = .\php_java.jar -;java.home = c:\jdk -;java.library = c:\jdk\jre\bin\hotspot\jvm.dll -;java.library.path = .\ - -[SQL] -sql.safe_mode = Off - -[ODBC] -;odbc.default_db = Not yet implemented -;odbc.default_user = Not yet implemented -;odbc.default_pw = Not yet implemented - -; Allow or prevent persistent links. -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of uodbc.defaultlrl and uodbc.defaultbinmode -odbc.defaultbinmode = 1 - -[MySQL] -; Allow or prevent persistent links. -mysql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mysql.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -mysql.max_links = -1 - -; Default port number for mysql_connect(). If unset, mysql_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -mysql.default_port = - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -mysql.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -mysql.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -mysql.default_user = - -; Default password for mysql_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -mysql.default_password = - -; Maximum time (in seconds) for connect timeout. -1 means no limit -mysql.connect_timeout = 60 - -; Trace mode. When trace_mode is active (=On), warnings for table/index scans and -; SQL-Errors will be displayed. -mysql.trace_mode = Off - -[mSQL] -; Allow or prevent persistent links. -msql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -msql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -msql.max_links = -1 - -[PostgresSQL] -; Allow or prevent persistent links. -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Noitce message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -pgsql.log_notice = 0 - -[Sybase] -; Allow or prevent persistent links. -sybase.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -sybase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -sybase.max_links = -1 - -;sybase.interface_file = "/usr/sybase/interfaces" - -; Minimum error severity to display. -sybase.min_error_severity = 10 - -; Minimum message severity to display. -sybase.min_message_severity = 10 - -; Compatability mode with old versions of PHP 3.0. -; If on, this will cause PHP to automatically assign types to results according -; to their Sybase type, instead of treating them all as strings. This -; compatibility mode will probably not stay around forever, so try applying -; whatever necessary changes to your code, and turn it off. -sybase.compatability_mode = Off - -[Sybase-CT] -; Allow or prevent persistent links. -sybct.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -sybct.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -sybct.max_links = -1 - -; Minimum server message severity to display. -sybct.min_server_severity = 10 - -; Minimum client message severity to display. -sybct.min_client_severity = 10 - -[dbx] -; returned column names can be converted for compatibility reasons -; possible values for dbx.colnames_case are -; "unchanged" (default, if not set) -; "lowercase" -; "uppercase" -; the recommended default is either upper- or lowercase, but -; unchanged is currently set for backwards compatibility -dbx.colnames_case = "lowercase" - -[bcmath] -; Number of decimal digits for all bcmath functions. -bcmath.scale = 0 - -[browscap] -;browscap = extra/browscap.ini - -[Informix] -; Default host for ifx_connect() (doesn't apply in safe mode). -ifx.default_host = - -; Default user for ifx_connect() (doesn't apply in safe mode). -ifx.default_user = - -; Default password for ifx_connect() (doesn't apply in safe mode). -ifx.default_password = - -; Allow or prevent persistent links. -ifx.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -ifx.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ifx.max_links = -1 - -; If on, select statements return the contents of a text blob instead of its id. -ifx.textasvarchar = 0 - -; If on, select statements return the contents of a byte blob instead of its id. -ifx.byteasvarchar = 0 - -; Trailing blanks are stripped from fixed-length char columns. May help the -; life of Informix SE users. -ifx.charasvarchar = 0 - -; If on, the contents of text and byte blobs are dumped to a file instead of -; keeping them in memory. -ifx.blobinfile = 0 - -; NULL's are returned as empty strings, unless this is set to 1. In that case, -; NULL's are returned as string 'NULL'. -ifx.nullformat = 0 - -[Session] -; Handler used to store/retrieve data. -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -;session.save_path = /tmp - -; Whether to use cookies. -session.use_cookies = 1 - -; This option enables administrators to make their users invulnerable to -; attacks which involve passing session ids in URLs; defaults to 0. -; session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -session.name = PHPSESSID - -; Initialize session on request startup. -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -session.cookie_path = / - -; The domain for which the cookie is valid. -session.cookie_domain = - -; Handler used to serialize data. php is the standard serializer of PHP. -session.serialize_handler = php - -; Define the probability that the 'garbage collection' process is started -; on every session initialization. -; The probability is calculated by using gc_probability/gc_divisor, -; e.g. 1/100 means there is a 1% chance that the GC process starts -; on each request. - -session.gc_probability = 1 -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -session.gc_maxlifetime = 1440 - -; PHP 4.2 and less have an undocumented feature/bug that allows you to -; to initialize a session variable in the global scope, albeit register_globals -; is disabled. PHP 4.3 and later will warn you, if this feature is used. -; You can disable the feature and the warning separately. At this time, -; the warning is only displayed, if bug_compat_42 is enabled. - -session.bug_compat_42 = 0 -session.bug_compat_warn = 1 - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -session.referer_check = - -; How many bytes to read from the file. -session.entropy_length = 0 - -; Specified here to create the session id. -session.entropy_file = - -;session.entropy_length = 16 - -;session.entropy_file = /dev/urandom - -; Set to {nocache,private,public,} to determine HTTP caching aspects. -; or leave this empty to avoid sending anti-caching headers. -session.cache_limiter = nocache - -; Document expires after n minutes. -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publically accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -session.use_trans_sid = 0 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -; form/fieldset are special; if you include them here, the rewriter will -; add a hidden <input> field with the info which is otherwise appended -; to URLs. If you want XHTML conformity, remove the form entry. -; Note that all valid entries require a "=", even if no value follows. -url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" - -[MSSQL] -; Allow or prevent persistent links. -mssql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mssql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -mssql.max_links = -1 - -; Minimum error severity to display. -mssql.min_error_severity = 10 - -; Minimum message severity to display. -mssql.min_message_severity = 10 - -; Compatability mode with old versions of PHP 3.0. -mssql.compatability_mode = Off - -; Connect timeout -;mssql.connect_timeout = 5 - -; Query timeout -;mssql.timeout = 60 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textlimit = 4096 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textsize = 4096 - -; Limits the number of records in each batch. 0 = all records in one batch. -;mssql.batchsize = 0 - -; Specify how datetime and datetim4 columns are returned -; On => Returns data converted to SQL server settings -; Off => Returns values as YYYY-MM-DD hh:mm:ss -;mssql.datetimeconvert = On - -; Use NT authentication when connecting to the server -mssql.secure_connection = Off - -; Specify max number of processes. Default = 25 -;mssql.max_procs = 25 - -[Assertion] -; Assert(expr); active by default. -;assert.active = On - -; Issue a PHP warning for each failed assertion. -;assert.warning = On - -; Don't bail out by default. -;assert.bail = Off - -; User-function to be called if an assertion fails. -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -;assert.quiet_eval = 0 - -[Ingres II] -; Allow or prevent persistent links. -ingres.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -ingres.max_persistent = -1 - -; Maximum number of links, including persistents. -1 means no limit. -ingres.max_links = -1 - -; Default database (format: [node_id::]dbname[/srv_class]). -ingres.default_database = - -; Default user. -ingres.default_user = - -; Default password. -ingres.default_password = - -[Verisign Payflow Pro] -; Default Payflow Pro server. -pfpro.defaulthost = "test-payflow.verisign.com" - -; Default port to connect to. -pfpro.defaultport = 443 - -; Default timeout in seconds. -pfpro.defaulttimeout = 30 - -; Default proxy IP address (if required). -;pfpro.proxyaddress = - -; Default proxy port. -;pfpro.proxyport = - -; Default proxy logon. -;pfpro.proxylogon = - -; Default proxy password. -;pfpro.proxypassword = - -[com] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -;com.typelib_file = -; allow Distributed-COM calls -;com.allow_dcom = true -; autoregister constants of a components typlib on com_load() -;com.autoregister_typelib = true -; register constants casesensitive -;com.autoregister_casesensitive = false -; show warnings on duplicate constat registrations -;com.autoregister_verbose = true - -[Printer] -;printer.default_printer = "" - -[mbstring] -; language for internal character representation. -;mbstring.language = Japanese - -; internal/script encoding. -; Some encoding cannot work as internal encoding. -; (e.g. SJIS, BIG5, ISO-2022-*) -;mbstring.internal_encoding = EUC-JP - -; http input encoding. -;mbstring.http_input = auto - -; http output encoding. mb_output_handler must be -; registered as output buffer to function -;mbstring.http_output = SJIS - -; enable automatic encoding translation accoding to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; auto means -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -;mbstring.substitute_character = none; - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -;mbstring.func_overload = 0 - -[FrontBase] -;fbsql.allow_persistent = On -;fbsql.autocommit = On -;fbsql.default_database = -;fbsql.default_database_password = -;fbsql.default_host = -;fbsql.default_password = -;fbsql.default_user = "_SYSTEM" -;fbsql.generate_warnings = Off -;fbsql.max_connections = 128 -;fbsql.max_links = 128 -;fbsql.max_persistent = -1 -;fbsql.max_results = 128 -;fbsql.batchSize = 1000 - -[Crack] -; Modify the setting below to match the directory location of the cracklib -; dictionary files. Include the base filename, but not the file extension. -; crack.default_dictionary = "c:\php\lib\cracklib_dict" - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -;exif.encode_unicode = ISO-8859-15 -;exif.decode_unicode_motorola = UCS-2BE -;exif.decode_unicode_intel = UCS-2LE -;exif.encode_jis = -;exif.decode_jis_motorola = JIS -;exif.decode_jis_intel = JIS - -; Local Variables: -; tab-width: 4 -; End: diff --git a/templates/vserver/vserver.d/etc/apache/vhosts b/templates/vserver/vserver.d/etc/apache/vhosts deleted file mode 100644 index e69de29..0000000 --- a/templates/vserver/vserver.d/etc/apache/vhosts +++ /dev/null diff --git a/templates/vserver/vserver.d/etc/hosts b/templates/vserver/vserver.d/etc/hosts deleted file mode 100644 index 6e33147..0000000 --- a/templates/vserver/vserver.d/etc/hosts +++ /dev/null @@ -1,21 +0,0 @@ -# -# hosts This file describes a number of hostname-to-address -# mappings for the TCP/IP subsystem. It is mostly -# used at boot time, when no name servers are running. -# On small systems, this file can be used instead of a -# "named" name server. Just add the names, addresses -# and any aliases to this file... -# -# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1 -# should NEVER be named with the name of the machine. It causes problems -# for some (stupid) programs, irc and reputedly talk. :^) -# - -# For loopbacking. -127.0.0.1 localhost -# This next entry is technically wrong, but good enough to get TCP/IP apps -# to quit complaining that they can't verify the hostname on a loopback-only -# Linux box. -127.0.0.1 darkstar.example.net darkstar - -# End of hosts. diff --git a/templates/vserver/vserver.d/etc/logrotate.d/apache b/templates/vserver/vserver.d/etc/logrotate.d/apache deleted file mode 100644 index f31fbe2..0000000 --- a/templates/vserver/vserver.d/etc/logrotate.d/apache +++ /dev/null @@ -1,11 +0,0 @@ -/var/log/apache/access_log /var/log/apache/error_log { - monthly - nomail - compress - create 0664 root root - rotate 12 - postrotate - /etc/rc.d/rc.httpd restart > /dev/null - endscript -} - diff --git a/templates/vserver/vserver.d/etc/profile b/templates/vserver/vserver.d/etc/profile deleted file mode 100644 index 563594a..0000000 --- a/templates/vserver/vserver.d/etc/profile +++ /dev/null @@ -1,87 +0,0 @@ -# /etc/profile: This file contains system-wide defaults used by -# all Bourne (and related) shells. - -# Set the values for some environment variables: -export MINICOM="-c on" -export MANPATH=/usr/local/man:/usr/man:/usr/X11R6/man -export HOSTNAME="`cat /etc/HOSTNAME`" -export LESSOPEN="|lesspipe.sh %s" -export LESS="-M" - -# If the user doesn't have a .inputrc, use the one in /etc. -if [ ! -r "$HOME/.inputrc" ]; then - export INPUTRC=/etc/inputrc -fi - -# Set the default system $PATH: -PATH="/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/games" - -# For root users, ensure that /usr/local/sbin, /usr/sbin, and /sbin are in -# the $PATH. Some means of connection don't add these by default (sshd comes -# to mind). -if [ "`id -u`" = "0" ]; then - echo $PATH | grep /usr/local/sbin 1> /dev/null 2> /dev/null - if [ ! $? = 0 ]; then - PATH=/usr/local/sbin:/usr/sbin:/sbin:$PATH - fi -fi - -# I had problems using 'eval tset' instead of 'TERM=', but you might want to -# try it anyway. I think with the right /etc/termcap it would work great. -# eval `tset -sQ "$TERM"` -if [ "$TERM" = "" -o "$TERM" = "unknown" ]; then - TERM=linux -fi - -# Set ksh93 visual editing mode: -if [ "$SHELL" = "/bin/ksh" ]; then - VISUAL=emacs -# VISUAL=gmacs -# VISUAL=vi -fi - -# Set a default shell prompt: -#PS1='`hostname`:`pwd`# ' -if [ "$SHELL" = "/bin/pdksh" ]; then - PS1='! $ ' -elif [ "$SHELL" = "/bin/ksh" ]; then - PS1='! ${PWD/#$HOME/~}$ ' -elif [ "$SHELL" = "/bin/zsh" ]; then - PS1='%n@%m:%~%# ' -elif [ "$SHELL" = "/bin/ash" ]; then - PS1='$ ' -else - PS1='\u@\h:\w\$ ' -fi -PS2='> ' -export PATH DISPLAY LESS TERM PS1 PS2 - -# Default umask. A umask of 022 prevents new files from being created group -# and world writable. -umask 022 - -# Set up the LS_COLORS and LS_OPTIONS environment variables for color ls: -if [ "$SHELL" = "/bin/zsh" ]; then - eval `dircolors -z` -elif [ "$SHELL" = "/bin/ash" ]; then - eval `dircolors -s` -else - eval `dircolors -b` -fi - -# Append any additional sh scripts found in /etc/profile.d/: -for profile_script in /etc/profile.d/*.sh ; do - if [ -x $profile_script ]; then - . $profile_script - fi -done -unset profile_script - -# For non-root users, add the current directory to the search path: -if [ ! "`id -u`" = "0" ]; then - PATH="$PATH:." -fi - -# firewall: -export FTP_PASSIVE=1 - diff --git a/templates/vserver/vserver.d/etc/rc.d/rc b/templates/vserver/vserver.d/etc/rc.d/rc deleted file mode 100755 index eefbcc5..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/bash - -if [ "$1" == "3" ]; then - /etc/rc.d/rc.M -elif [ "$1" == "6" ]; then - /etc/rc.d/rc.6 -else - echo "Invalid level." - exit 1 -fi - diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.0 b/templates/vserver/vserver.d/etc/rc.d/rc.0 deleted file mode 100755 index bfec90a..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.0 +++ /dev/null @@ -1,110 +0,0 @@ -#! /bin/sh -# -# rc.6 This file is executed by init when it goes into runlevel -# 0 (halt) or runlevel 6 (reboot). It kills all processes, -# unmounts file systems and then either halts or reboots. -# -# Version: @(#)/etc/rc.d/rc.6 2.47 Sat Jan 13 13:37:26 PST 2001 -# -# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org> -# Modified by: Patrick J. Volkerding, <volkerdi@slackware.com> -# - -# Set the path. -PATH=/sbin:/etc:/bin:/usr/bin - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Set linefeed mode to avoid staircase effect. -stty onlcr - -echo "Running shutdown script $0:" - -# Find out how we were called. -case "$0" in - *0) - command="halt" - ;; - *6) - command=reboot - ;; - *) - echo "$0: call me as \"rc.0\" or \"rc.6\" please!" - exit 1 - ;; -esac - -# Stop the Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - /etc/rc.d/rc.httpd stop -fi - -# Stop the MySQL database: -if [ -r /var/run/mysql/mysql.pid ]; then - . /etc/rc.d/rc.mysqld stop -fi - -# Stop the Samba server: -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba stop -fi - -# Try to kill dhcpcd so the DHCP leases can be returned: -killall -15 dhcpcd 1> /dev/null 2> /dev/null - -# Try to shut down pppd: -PS="$(ps ax)" -if echo "$PS" | grep -q -w pppd ; then - if [ -x /usr/sbin/ppp-off ]; then - /usr/sbin/ppp-off - fi -fi - -# Turn off process accounting: -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - echo "Turning off process accounting." - /sbin/accton -fi - -# Kill all processes. -# INIT is supposed to handle this entirely now, but this didn't always -# work correctly without this second pass at killing off the processes. -# Since INIT already notified the user that processes were being killed, -# we'll avoid echoing this info this time around. -if [ "$1" != "fast" ]; then # shutdown did not already kill all processes - killall5 -15 - sleep 5 - killall5 -9 -fi - -# Carry a random seed between reboots. -echo "Saving random seed from /dev/urandom in /etc/random-seed." -# Use the pool size from /proc, or 512 bytes: -if [ -r /proc/sys/kernel/random/poolsize ]; then - dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null -else - dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null -fi -chmod 600 /etc/random-seed - -# Before unmounting file systems write a reboot or halt record to wtmp. -$command -w - -# Clear /var/lock/subsys. -if [ -d /var/lock/subsys ]; then - rm -f /var/lock/subsys/* -fi - -# This never hurts: -sync - -# sleep 1 fixes problems with some hard drives that don't -# otherwise finish syncing before reboot or poweroff -sleep 1 - -# This is to ensure all processes have completed on SMP machines: -wait - diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.4 b/templates/vserver/vserver.d/etc/rc.d/rc.4 deleted file mode 100644 index b972052..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.4 +++ /dev/null @@ -1,256 +0,0 @@ -#!/bin/sh -# -# rc.M This file is executed by init(8) when the system is being -# initialized for one of the "multi user" run levels (i.e. -# levels 1 through 6). It usually does mounting of file -# systems et al. -# -# Version: @(#)/etc/rc.d/rc.M 2.23 Wed Feb 26 19:20:58 PST 2003 -# -# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> -# Heavily modified by Patrick Volkerding <volkerdi@slackware.com> -# - -# Tell the viewers what's going to happen. -echo "Going multiuser..." - -# Screen blanks after 15 minutes idle time, and powers down in one hour -# if the kernel supports APM or ACPI power management: -#/bin/setterm -blank 15 -powersave powerdown -powerdown 60 - -# Set the hostname. -#if [ -r /etc/HOSTNAME ]; then -# /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .) -#else - # fall back on this old default: -# echo "darkstar.example.net" > /etc/HOSTNAME -# /bin/hostname darkstar -#fi - -# Save the contents of 'dmesg': -#/bin/dmesg -s 65536 > /var/log/dmesg - -# Start the system logger. -if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then - . /etc/rc.d/rc.syslog start -fi - -# Initialize PCMCIA devices: -# -# NOTE: This used to be started near the top of rc.S so that PCMCIA devices -# could be fsck'ed along with the other drives. This had some unfortunate -# side effects, however, since root isn't yet read-write, and /var might not -# even be mounted the .pid files can't be correctly written in /var/run and -# the pcmcia system can't be correctly shut down. If you want some PCMCIA -# partition to be mounted at boot (or when the card is inserted) then add -# the appropriate lines to /etc/pcmcia/scsi.opts. -# -if [ -x /etc/rc.d/rc.pcmcia ] ; then - . /etc/rc.d/rc.pcmcia start - # The cards might need a little extra time here to initialize. - if [ -r /var/run/cardmgr.pid ]; then - sleep 5 - fi -fi - -# Initialize the networking hardware. If your network driver is a module -# and you haven't loaded it manually, this will be deferred until after -# the hotplug system loads the module below. -#if [ -x /etc/rc.d/rc.inet1 ]; then -# . /etc/rc.d/rc.inet1 -#fi - -# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices: -if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then - # Don't run hotplug if 'nohotplug' was given at boot. - if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then - echo "Activating hardware detection: /etc/rc.d/rc.hotplug start" - . /etc/rc.d/rc.hotplug start - fi -fi - -# Start networking daemons: -if [ -x /etc/rc.d/rc.inet2 ]; then - . /etc/rc.d/rc.inet2 -fi - -# Remove stale locks and junk files (must be done after mount -a!) -/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null - -# Remove stale hunt sockets so the game can start. -if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then - echo "Removing your stale hunt sockets from /tmp." - /bin/rm -f /tmp/hunt* -fi - -# Ensure basic filesystem permissions sanity. -chmod 755 / 2> /dev/null -chmod 1777 /tmp /var/tmp - -# Update all the shared library links: -if [ -x /sbin/ldconfig ]; then - echo "Updating shared library links: /sbin/ldconfig" - /sbin/ldconfig -fi - -# Update the X font indexes: -if [ -x /usr/X11R6/bin/fc-cache ]; then - echo "Updating X font indexes: /usr/X11R6/bin/fc-cache" - /usr/X11R6/bin/fc-cache -fi - -# Start the print spooling system. This will usually be LPRng (lpd) or CUPS. -if [ -x /etc/rc.d/rc.cups ]; then - # Start CUPS: - /etc/rc.d/rc.cups start -elif [ -x /etc/rc.d/rc.lprng ]; then - # Start LPRng (lpd): - . /etc/rc.d/rc.lprng start -fi - -# Start netatalk. (a file/print server for Macs using Appletalk) -if [ -x /etc/rc.d/rc.atalk ]; then - /etc/rc.d/rc.atalk -fi - -# Start smartd, which monitors the status of S.M.A.R.T. compatible -# hard drives and reports any problems. Note some devices (which aren't -# smart, I guess ;) will hang if probed by smartd, so it's commented out -# by default. -#if [ -x /usr/sbin/smartd ]; then -# /usr/sbin/smartd -#fi - -# Monitor the UPS with genpowerd. -# To use this, uncomment this section and edit your settings in -# /etc/genpowerd.conf (serial device, UPS type, etc). For more information, -# see "man genpowerd" or the extensive documentation in the -# /usr/doc/genpower-1.0.3 directory. -# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want -# support for stopping the UPS's inverter after the machine halts. -#if [ -x /sbin/genpowerd ]; then -# echo "Starting genpowerd daemon..." -# /sbin/genpowerd -#fi - -# Turn on process accounting. To enable process accounting, make sure the -# option for BSD process accounting is enabled in your kernel, and then -# create the file /var/log/pacct (touch /var/log/pacct). By default, process -# accounting is not enabled (since /var/log/pacct does not exist). This is -# because the log file can get VERY large. -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - /sbin/accton /var/log/pacct - chmod 640 /var/log/pacct - echo "Process accounting turned on." -fi - -# Start crond (Dillon's crond): -# If you want cron to actually log activity to /var/log/cron, then change -# -l10 to -l8 to increase the logging level. -if [ -x /usr/sbin/crond ]; then - /usr/sbin/crond -l10 >>/var/log/cron 2>&1 -fi - -# Start atd (manages jobs scheduled with 'at'): -if [ -x /usr/sbin/atd ]; then - /usr/sbin/atd -b 15 -l 1 -fi - -# Slackware-Mini-Quota-HOWTO: -# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to -# the appropriate partitions as listed in /etc/fstab. Here's an example: -# -# /dev/hda2 /home ext3 defaults,usrquota 1 1 -# -# You'll then need to setup initial quota files at the top of the partitions -# to support quota, like this: -# touch /home/aquota.user /home/aquota.group -# chmod 600 /home/aquota.user /home/aquota.group -# -# Then, reboot to activate the system. -# To edit user quotas, use 'edquota'. See 'man edquota'. Also, the -# official Quota Mini-HOWTO has lots of useful information. That can be found -# here: /usr/doc/Linux-HOWTOs/Quota - -# Check quotas and then turn quota system on: -if grep -q quota /etc/fstab ; then - if [ -x /sbin/quotacheck ]; then - echo "Checking filesystem quotas: /sbin/quotacheck -avugm" - /sbin/quotacheck -avugm - fi - if [ -x /sbin/quotaon ]; then - echo "Activating filesystem quotas: /sbin/quotaon -avug" - /sbin/quotaon -avug - fi -fi - -# Start the sendmail daemon: -if [ -x /etc/rc.d/rc.sendmail ]; then - . /etc/rc.d/rc.sendmail start -fi - -# Start the APM daemon if APM is enabled in the kernel: -if [ -x /usr/sbin/apmd ]; then - if cat /proc/apm 1> /dev/null 2> /dev/null ; then - echo "Starting APM daemon: /usr/sbin/apmd" - /usr/sbin/apmd - fi -fi - -# Start the ACPI (Advanced Configuration and Power Interface) daemon: -if [ -x /etc/rc.d/rc.acpid ]; then - . /etc/rc.d/rc.acpid start -fi - -# Load ALSA (sound) defaults: -if [ -x /etc/rc.d/rc.alsa ]; then - . /etc/rc.d/rc.alsa -fi - -# Load a custom screen font if the user has an rc.font script. -if [ -x /etc/rc.d/rc.font ]; then - . /etc/rc.d/rc.font -fi - -# Load a custom keymap if the user has an rc.keymap script. -if [ -x /etc/rc.d/rc.keymap ]; then - . /etc/rc.d/rc.keymap -fi - -# Initialize HP Officejet support: -if [ -x /etc/rc.d/rc.hpoj ]; then - . /etc/rc.d/rc.hpoj start -fi - -# Start the MySQL database: -if [ -x /etc/rc.d/rc.mysqld ]; then - . /etc/rc.d/rc.mysqld start -fi - -# Start Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - . /etc/rc.d/rc.httpd start -fi - -# Start Samba (a file/print server for Win95/NT machines). -# Samba can be started in /etc/inetd.conf instead. -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba start -fi - -# Start the GPM mouse server: -if [ -x /etc/rc.d/rc.gpm ]; then - . /etc/rc.d/rc.gpm start -fi - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Start the local setup procedure. -if [ -x /etc/rc.d/rc.local ]; then - . /etc/rc.d/rc.local -fi - -# All done. diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.6 b/templates/vserver/vserver.d/etc/rc.d/rc.6 deleted file mode 100755 index bfec90a..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.6 +++ /dev/null @@ -1,110 +0,0 @@ -#! /bin/sh -# -# rc.6 This file is executed by init when it goes into runlevel -# 0 (halt) or runlevel 6 (reboot). It kills all processes, -# unmounts file systems and then either halts or reboots. -# -# Version: @(#)/etc/rc.d/rc.6 2.47 Sat Jan 13 13:37:26 PST 2001 -# -# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org> -# Modified by: Patrick J. Volkerding, <volkerdi@slackware.com> -# - -# Set the path. -PATH=/sbin:/etc:/bin:/usr/bin - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Set linefeed mode to avoid staircase effect. -stty onlcr - -echo "Running shutdown script $0:" - -# Find out how we were called. -case "$0" in - *0) - command="halt" - ;; - *6) - command=reboot - ;; - *) - echo "$0: call me as \"rc.0\" or \"rc.6\" please!" - exit 1 - ;; -esac - -# Stop the Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - /etc/rc.d/rc.httpd stop -fi - -# Stop the MySQL database: -if [ -r /var/run/mysql/mysql.pid ]; then - . /etc/rc.d/rc.mysqld stop -fi - -# Stop the Samba server: -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba stop -fi - -# Try to kill dhcpcd so the DHCP leases can be returned: -killall -15 dhcpcd 1> /dev/null 2> /dev/null - -# Try to shut down pppd: -PS="$(ps ax)" -if echo "$PS" | grep -q -w pppd ; then - if [ -x /usr/sbin/ppp-off ]; then - /usr/sbin/ppp-off - fi -fi - -# Turn off process accounting: -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - echo "Turning off process accounting." - /sbin/accton -fi - -# Kill all processes. -# INIT is supposed to handle this entirely now, but this didn't always -# work correctly without this second pass at killing off the processes. -# Since INIT already notified the user that processes were being killed, -# we'll avoid echoing this info this time around. -if [ "$1" != "fast" ]; then # shutdown did not already kill all processes - killall5 -15 - sleep 5 - killall5 -9 -fi - -# Carry a random seed between reboots. -echo "Saving random seed from /dev/urandom in /etc/random-seed." -# Use the pool size from /proc, or 512 bytes: -if [ -r /proc/sys/kernel/random/poolsize ]; then - dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null -else - dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null -fi -chmod 600 /etc/random-seed - -# Before unmounting file systems write a reboot or halt record to wtmp. -$command -w - -# Clear /var/lock/subsys. -if [ -d /var/lock/subsys ]; then - rm -f /var/lock/subsys/* -fi - -# This never hurts: -sync - -# sleep 1 fixes problems with some hard drives that don't -# otherwise finish syncing before reboot or poweroff -sleep 1 - -# This is to ensure all processes have completed on SMP machines: -wait - diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.K b/templates/vserver/vserver.d/etc/rc.d/rc.K deleted file mode 100755 index 00a1501..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.K +++ /dev/null @@ -1,88 +0,0 @@ -#! /bin/sh -# -# rc.K This file is executed by init when it goes into runlevel -# 1, which is the administrative state. It kills all -# daemons and then puts the system into single user mode. -# Note that the file systems are kept mounted. -# -# Version: @(#)/etc/rc.d/rc.K 3.1415 Sat Jan 13 13:37:26 PST 2001 -# -# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org> -# Modified by: Patrick J. Volkerding <volkerdi@slackware.com> -# - -# Set the path. -PATH=/sbin:/bin:/usr/bin:/usr/sbin - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Try to turn off quota: -if grep -q quota /etc/fstab ; then - if [ -x /sbin/quotaoff ]; then - echo "Turning off filesystem quotas." - /sbin/quotaoff -a - fi -fi - -# Try to turn off accounting: -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - echo "Turning off accounting." - /sbin/accton -fi - -# Stop the Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - /etc/rc.d/rc.httpd stop -fi - -# Stop the Samba server: -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba stop -fi - -# Shut down the NFS server: -if [ -x /etc/rc.d/rc.nfsd ]; then - /etc/rc.d/rc.nfsd stop -fi - -# Shut down PCMCIA devices: -if [ -x /etc/rc.d/rc.pcmcia ] ; then - . /etc/rc.d/rc.pcmcia stop - # The cards might need a little extra time here to initialize. - sleep 5 -fi - -# Kill all processes. -echo -echo "Sending all processes the SIGHUP signal." -killall5 -1 -echo -n "Waiting for processes to hang up" -for loop in 0 1 2 3 4 5 ; do - sleep 1 - echo -n "." -done -echo -echo "Sending all processes the SIGTERM signal." -killall5 -15 -echo -n "Waiting for processes to terminate" -for loop in 0 1 2 3 4 5 ; do - sleep 1 - echo -n "." -done -echo -echo "Sending all processes the SIGKILL signal." -killall5 -9 -echo -n "Waiting for processes to exit" -for loop in 0 1 2 3 4 5 ; do - sleep 1 - echo -n "." -done -echo - -# Now go to the single user level -echo "Going to single user mode..." -telinit -t 1 1 - diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.M b/templates/vserver/vserver.d/etc/rc.d/rc.M deleted file mode 100755 index 0cb3343..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.M +++ /dev/null @@ -1,256 +0,0 @@ -#!/bin/sh -# -# rc.M This file is executed by init(8) when the system is being -# initialized for one of the "multi user" run levels (i.e. -# levels 1 through 6). It usually does mounting of file -# systems et al. -# -# Version: @(#)/etc/rc.d/rc.M 2.23 Wed Feb 26 19:20:58 PST 2003 -# -# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> -# Heavily modified by Patrick Volkerding <volkerdi@slackware.com> -# - -# Tell the viewers what's going to happen. -echo "Going multiuser..." - -# Screen blanks after 15 minutes idle time, and powers down in one hour -# if the kernel supports APM or ACPI power management: -#/bin/setterm -blank 15 -powersave powerdown -powerdown 60 - -# Set the hostname. -#if [ -r /etc/HOSTNAME ]; then -# /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .) -#else - # fall back on this old default: -# echo "darkstar.example.net" > /etc/HOSTNAME -# /bin/hostname darkstar -#fi - -# Save the contents of 'dmesg': -#/bin/dmesg -s 65536 > /var/log/dmesg - -# Start the system logger. -if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then - . /etc/rc.d/rc.syslog start -fi - -# Initialize PCMCIA devices: -# -# NOTE: This used to be started near the top of rc.S so that PCMCIA devices -# could be fsck'ed along with the other drives. This had some unfortunate -# side effects, however, since root isn't yet read-write, and /var might not -# even be mounted the .pid files can't be correctly written in /var/run and -# the pcmcia system can't be correctly shut down. If you want some PCMCIA -# partition to be mounted at boot (or when the card is inserted) then add -# the appropriate lines to /etc/pcmcia/scsi.opts. -# -if [ -x /etc/rc.d/rc.pcmcia ] ; then - . /etc/rc.d/rc.pcmcia start - # The cards might need a little extra time here to initialize. - if [ -r /var/run/cardmgr.pid ]; then - sleep 5 - fi -fi - -# Initialize the networking hardware. If your network driver is a module -# and you haven't loaded it manually, this will be deferred until after -# the hotplug system loads the module below. -#if [ -x /etc/rc.d/rc.inet1 ]; then -# . /etc/rc.d/rc.inet1 -#fi - -# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices: -if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then - # Don't run hotplug if 'nohotplug' was given at boot. - if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then - echo "Activating hardware detection: /etc/rc.d/rc.hotplug start" - . /etc/rc.d/rc.hotplug start - fi -fi - -# Start networking daemons: -if [ -x /etc/rc.d/rc.inet2 ]; then - . /etc/rc.d/rc.inet2 -fi - -# Remove stale locks and junk files (must be done after mount -a!) -/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null - -# Remove stale hunt sockets so the game can start. -if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then - echo "Removing your stale hunt sockets from /tmp." - /bin/rm -f /tmp/hunt* -fi - -# Ensure basic filesystem permissions sanity. -chmod 755 / 2> /dev/null -chmod 1777 /tmp /var/tmp - -# Update all the shared library links: -if [ -x /sbin/ldconfig ]; then - echo "Updating shared library links: /sbin/ldconfig" - /sbin/ldconfig -fi - -# Update the X font indexes: -if [ -x /usr/X11R6/bin/fc-cache ]; then - echo "Updating X font indexes: /usr/X11R6/bin/fc-cache" - /usr/X11R6/bin/fc-cache -fi - -# Start the print spooling system. This will usually be LPRng (lpd) or CUPS. -if [ -x /etc/rc.d/rc.cups ]; then - # Start CUPS: - /etc/rc.d/rc.cups start -elif [ -x /etc/rc.d/rc.lprng ]; then - # Start LPRng (lpd): - . /etc/rc.d/rc.lprng start -fi - -# Start netatalk. (a file/print server for Macs using Appletalk) -if [ -x /etc/rc.d/rc.atalk ]; then - /etc/rc.d/rc.atalk -fi - -# Start smartd, which monitors the status of S.M.A.R.T. compatible -# hard drives and reports any problems. Note some devices (which aren't -# smart, I guess ;) will hang if probed by smartd, so it's commented out -# by default. -#if [ -x /usr/sbin/smartd ]; then -# /usr/sbin/smartd -#fi - -# Monitor the UPS with genpowerd. -# To use this, uncomment this section and edit your settings in -# /etc/genpowerd.conf (serial device, UPS type, etc). For more information, -# see "man genpowerd" or the extensive documentation in the -# /usr/doc/genpower-1.0.3 directory. -# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want -# support for stopping the UPS's inverter after the machine halts. -#if [ -x /sbin/genpowerd ]; then -# echo "Starting genpowerd daemon..." -# /sbin/genpowerd -#fi - -# Turn on process accounting. To enable process accounting, make sure the -# option for BSD process accounting is enabled in your kernel, and then -# create the file /var/log/pacct (touch /var/log/pacct). By default, process -# accounting is not enabled (since /var/log/pacct does not exist). This is -# because the log file can get VERY large. -if [ -x /sbin/accton -a -r /var/log/pacct ]; then - /sbin/accton /var/log/pacct - chmod 640 /var/log/pacct - echo "Process accounting turned on." -fi - -# Start crond (Dillon's crond): -# If you want cron to actually log activity to /var/log/cron, then change -# -l10 to -l8 to increase the logging level. -if [ -x /usr/sbin/crond ]; then - /usr/sbin/crond -l10 >>/var/log/cron 2>&1 -fi - -# Start atd (manages jobs scheduled with 'at'): -if [ -x /usr/sbin/atd ]; then - /usr/sbin/atd -b 15 -l 1 -fi - -# Slackware-Mini-Quota-HOWTO: -# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to -# the appropriate partitions as listed in /etc/fstab. Here's an example: -# -# /dev/hda2 /home ext3 defaults,usrquota 1 1 -# -# You'll then need to setup initial quota files at the top of the partitions -# to support quota, like this: -# touch /home/aquota.user /home/aquota.group -# chmod 600 /home/aquota.user /home/aquota.group -# -# Then, reboot to activate the system. -# To edit user quotas, use 'edquota'. See 'man edquota'. Also, the -# official Quota Mini-HOWTO has lots of useful information. That can be found -# here: /usr/doc/Linux-HOWTOs/Quota - -# Check quotas and then turn quota system on: -if grep -q quota /etc/fstab ; then - if [ -x /sbin/quotacheck ]; then - echo "Checking filesystem quotas: /sbin/quotacheck -avugm" - /sbin/quotacheck -avugm - fi - if [ -x /sbin/quotaon ]; then - echo "Activating filesystem quotas: /sbin/quotaon -avug" - /sbin/quotaon -avug - fi -fi - -# Start the sendmail daemon: -if [ -x /etc/rc.d/rc.sendmail ]; then - . /etc/rc.d/rc.sendmail start -fi - -# Start the APM daemon if APM is enabled in the kernel: -if [ -x /usr/sbin/apmd ]; then - if cat /proc/apm 1> /dev/null 2> /dev/null ; then - echo "Starting APM daemon: /usr/sbin/apmd" - /usr/sbin/apmd - fi -fi - -# Start the ACPI (Advanced Configuration and Power Interface) daemon: -if [ -x /etc/rc.d/rc.acpid ]; then - . /etc/rc.d/rc.acpid start -fi - -# Load ALSA (sound) defaults: -if [ -x /etc/rc.d/rc.alsa ]; then - . /etc/rc.d/rc.alsa -fi - -# Load a custom screen font if the user has an rc.font script. -if [ -x /etc/rc.d/rc.font ]; then - . /etc/rc.d/rc.font -fi - -# Load a custom keymap if the user has an rc.keymap script. -if [ -x /etc/rc.d/rc.keymap ]; then - . /etc/rc.d/rc.keymap -fi - -# Initialize HP Officejet support: -if [ -x /etc/rc.d/rc.hpoj ]; then - . /etc/rc.d/rc.hpoj start -fi - -# Start the MySQL database: -if [ -x /etc/rc.d/rc.mysqld ]; then - . /etc/rc.d/rc.mysqld start -fi - -# Start Apache web server: -if [ -x /etc/rc.d/rc.httpd ]; then - . /etc/rc.d/rc.httpd start -fi - -# Start Samba (a file/print server for Win95/NT machines). -# Samba can be started in /etc/inetd.conf instead. -if [ -x /etc/rc.d/rc.samba ]; then - . /etc/rc.d/rc.samba start -fi - -# Start the GPM mouse server: -if [ -x /etc/rc.d/rc.gpm ]; then - . /etc/rc.d/rc.gpm start -fi - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Start the local setup procedure. -if [ -x /etc/rc.d/rc.local ]; then - . /etc/rc.d/rc.local -fi - -# All done. diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.S b/templates/vserver/vserver.d/etc/rc.d/rc.S deleted file mode 100755 index 05c75b4..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.S +++ /dev/null @@ -1,294 +0,0 @@ -#!/bin/sh -# -# /etc/rc.d/rc.S: System initialization script. -# -# Mostly written by: Patrick J. Volkerding, <volkerdi@slackware.com> -# - -PATH=/sbin:/usr/sbin:/bin:/usr/bin - -# Mount /proc right away: -/sbin/mount -v proc /proc -n -t proc - -# If 'nohotplug' was given at boot, or rc.hotplug has been turned off -# (is not executable), then shut off hotplugging in the kernel now. -# Turning off hotplug is *not* recommended, and will break some things. -if [ -w /proc/sys/kernel/hotplug ]; then - if grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then - echo "/dev/null" > /proc/sys/kernel/hotplug - elif [ ! -x /etc/rc.d/rc.hotplug ]; then - echo "/dev/null" > /proc/sys/kernel/hotplug - fi -fi - -# Start devfsd if necessary. On newer kernels, udev should be used instead. -if [ -x /etc/rc.d/rc.devfsd ]; then - /etc/rc.d/rc.devfsd start -fi - -# Mount sysfs next, if the kernel supports it: -if [ -d /sys ]; then - if cat /proc/filesystems | grep -w sysfs 1> /dev/null 2> /dev/null ; then - if ! cat /proc/mounts | grep -w sysfs 1> /dev/null 2> /dev/null ; then - /sbin/mount -v sysfs /sys -n -t sysfs - fi - fi -fi - -# Initialize udev to manage /dev entries for 2.6.x kernels: -if [ -x /etc/rc.d/rc.udev ]; then - if ! grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then - /etc/rc.d/rc.udev - fi -fi - -# Enable swapping: -/sbin/swapon -a - -# Test to see if the root partition is read-only, like it ought to be. -READWRITE=no -if touch /fsrwtestfile 2>/dev/null; then - rm -f /fsrwtestfile - READWRITE=yes -else - echo "Testing root filesystem status: read-only filesystem" -fi - -# See if a forced filesystem check was requested at shutdown: -if [ -r /etc/forcefsck ]; then - FORCEFSCK="-f" -fi - -# Check the root filesystem: -if [ ! $READWRITE = yes ]; then - RETVAL=0 - if [ ! -r /etc/fastboot ]; then - echo "Checking root filesystem:" - /sbin/fsck $FORCEFSCK -C -a / - RETVAL=$? - fi - # An error code of 2 or higher will require a reboot. - if [ $RETVAL -ge 2 ]; then - # An error code equal to or greater than 4 means that some errors - # could not be corrected. This requires manual attention, so we - # offer a chance to try to fix the problem in single-user mode: - if [ $RETVAL -ge 4 ]; then - echo - echo "***********************************************************" - echo "*** An error occurred during the root filesystem check. ***" - echo "*** You will now be given a chance to log into the ***" - echo "*** system in single-user mode to fix the problem. ***" - echo "*** ***" - echo "*** If you are using the ext2 filesystem, running ***" - echo "*** 'e2fsck -v -y <partition>' might help. ***" - echo "***********************************************************" - echo - echo "Once you exit the single-user shell, the system will reboot." - echo - PS1="(Repair filesystem) \#"; export PS1 - sulogin - else # With an error code of 2 or 3, reboot the machine automatically: - echo - echo "***********************************" - echo "*** The filesystem was changed. ***" - echo "*** The system will now reboot. ***" - echo "***********************************" - echo - fi - echo "Unmounting file systems." - /sbin/umount -a -r - /sbin/mount -n -o remount,ro / - echo "Rebooting system." - sleep 2 - reboot -f - fi - # Remount the root filesystem in read-write mode - echo "Remounting root device with read-write enabled." - /sbin/mount -w -v -n -o remount / - if [ $? -gt 0 ] ; then - echo - echo "Attempt to remount root device as read-write failed! This is going to" - echo "cause serious problems." - echo - echo "If you're using the UMSDOS filesystem, you **MUST** mount the root partition" - echo "read-write! You can make sure the root filesystem is getting mounted " - echo "read-write with the 'rw' flag to Loadlin:" - echo - echo "loadlin vmlinuz root=/dev/hda1 rw (replace /dev/hda1 with your root device)" - echo - echo "Normal bootdisks can be made to mount a system read-write with the rdev command:" - echo - echo "rdev -R /dev/fd0 0" - echo - echo "You can also get into your system by using a boot disk with a command like this" - echo "on the LILO prompt line: (change the root partition name as needed)" - echo - echo "LILO: mount root=/dev/hda1 rw" - echo - echo "Please press ENTER to continue, then reboot and use one of the above methods to" - echo -n "get into your machine and start looking for the problem. " - read junk; - fi -else - echo "Testing root filesystem status: read-write filesystem" - if cat /etc/fstab | grep ' / ' | grep umsdos 1> /dev/null 2> /dev/null ; then - ROOTTYPE="umsdos" - fi - if [ ! "$ROOTTYPE" = "umsdos" ]; then # no warn for UMSDOS - echo - echo "*** ERROR: Root partition has already been mounted read-write. Cannot check!" - echo - echo "For filesystem checking to work properly, your system must initially mount" - echo "the root partition as read only. Please modify your kernel with 'rdev' so that" - echo "it does this. If you're booting with LILO, add a line:" - echo - echo " read-only" - echo - echo "to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it." - echo - echo "If you boot from a kernel on a floppy disk, put it in the drive and type:" - echo " rdev -R /dev/fd0 1" - echo - echo "If you boot from a bootdisk, or with Loadlin, you can add the 'ro' flag." - echo - echo "This will fix the problem *AND* eliminate this annoying message. :^)" - echo - echo -n "Press ENTER to continue. " - read junk; - fi -fi # Done checking root filesystem - -# Any /etc/mtab that exists here is old, so we delete it to start over: -/bin/rm -f /etc/mtab* -# Remounting the / partition will initialize the new /etc/mtab: -/sbin/mount -w -o remount / - -# Fix /etc/mtab to list sys and proc if they were not yet entered in -# /etc/mtab because / was still mounted read-only: -if [ -d /proc/sys ]; then - /sbin/mount -f proc /proc -t proc -fi -if [ -d /sys/bus ]; then - /sbin/mount -f sysfs /sys -t sysfs -fi - -# Set the system time from the hardware clock using hwclock --hctosys. -if [ -x /sbin/hwclock ]; then - if grep "^UTC" /etc/hardwareclock 1> /dev/null 2> /dev/null ; then - echo "Setting system time from the hardware clock (UTC)." - /sbin/hwclock --utc --hctosys - else - echo "Setting system time from the hardware clock (localtime)." - /sbin/hwclock --localtime --hctosys - fi -fi - -# Configure ISA Plug-and-Play devices: -if [ -r /etc/isapnp.conf ]; then - if [ -x /sbin/isapnp ]; then - /sbin/isapnp /etc/isapnp.conf - fi -fi - -# This loads any kernel modules that are needed. These might be required to -# use your ethernet card, sound card, or other optional hardware. -if [ -x /etc/rc.d/rc.modules -a -r /proc/modules ]; then - . /etc/rc.d/rc.modules -fi - -# Configure runtime kernel parameters: -if [ -x /sbin/sysctl -a -r /etc/sysctl.conf ]; then - /sbin/sysctl -e -p /etc/sysctl.conf -fi - -# Initialize the Logical Volume Manager. -# This won't start unless we find /etc/lvmtab (LVM1) or -# /etc/lvm/backup/ (LVM2). This is created by /sbin/vgscan, so to -# use LVM you must run /sbin/vgscan yourself the first time (and -# create some VGs and LVs). -if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then - echo "Initializing LVM (Logical Volume Manager):" - # Check for device-mapper support. - if ! cat /proc/devices | grep -w device-mapper 1> /dev/null 2> /dev/null ; then - # If device-mapper exists as a module, try to load it. - if [ -r /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko ]; then - insmod /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko - fi - fi - # Scan for new volume groups: - /sbin/vgscan 2> /dev/null - if [ $? = 0 ]; then - # This needs a moment to register. - sleep 10 - # Make volume groups available to the kernel. - # This should also make logical volumes available. - /sbin/vgchange -ay - # Enable swapping again in case any LVs are used for swap. Ignore previous error. :-) - /sbin/swapon -a - fi -fi - -# Check all the non-root filesystems: -if [ ! -r /etc/fastboot ]; then - echo "Checking non-root filesystems:" - /sbin/fsck $FORCEFSCK -C -R -A -a -fi - -# mount non-root file systems in fstab (but not NFS or SMB -# because TCP/IP is not yet configured, and not proc because -# that has already been mounted): -/sbin/mount -a -v -t nonfs,nosmbfs,noproc - -# Clean up some temporary files: -( cd /var/log/setup/tmp && rm -rf * ) -/bin/rm -f /var/run/utmp /var/run/*pid /etc/nologin /var/run/lpd* \ - /var/run/ppp* /etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot - -# Attempt to umount and remove any leftover /initrd: -if [ -d /initrd ]; then - /sbin/umount /initrd 2> /dev/null - rmdir /initrd 2> /dev/null - blockdev --flushbufs /dev/ram0 2> /dev/null -fi - -# Create a fresh utmp file: -touch /var/run/utmp -chown root.utmp /var/run/utmp -chmod 664 /var/run/utmp - -if [ "$ROOTTYPE" = "umsdos" ]; then # we need to update any files added in DOS: - echo "Synchronizing UMSDOS directory structure:" - echo " /sbin/umssync -r99 -v- /" - /sbin/umssync -r99 -v- / -fi - -# Setup the /etc/motd to reflect the current kernel level: -# THIS WIPES ANY CHANGES YOU MAKE TO /ETC/MOTD WITH EACH BOOT. -# COMMENT THIS OUT IF YOU WANT TO MAKE A CUSTOM VERSION. -echo "$(/bin/uname -sr)." > /etc/motd - -# If there are SystemV init scripts for this runlevel, run them. -if [ -x /etc/rc.d/rc.sysvinit ]; then - . /etc/rc.d/rc.sysvinit -fi - -# Run serial port setup script: -# (CAREFUL! This can make some systems hang if the rc.serial script isn't -# set up correctly. If this happens, you may have to edit the file from a -# boot disk) -# -# . /etc/rc.d/rc.serial - -# Carry an entropy pool between reboots to improve randomness. -if [ -f /etc/random-seed ]; then - echo "Using /etc/random-seed to initialize /dev/urandom." - cat /etc/random-seed > /dev/urandom -fi -# Use the pool size from /proc, or 512 bytes: -if [ -r /proc/sys/kernel/random/poolsize ]; then - dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null -else - dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null -fi -chmod 600 /etc/random-seed - diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.httpd b/templates/vserver/vserver.d/etc/rc.d/rc.httpd deleted file mode 100644 index 00b8837..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.httpd +++ /dev/null @@ -1,21 +0,0 @@ -#!/bin/sh -# -# /etc/rc.d/rc.httpd -# -# Start/stop/restart the Apache web server. -# -# To make Apache start automatically at boot, make this -# file executable: chmod 755 /etc/rc.d/rc.httpd -# - -case "$1" in - 'start') - /usr/sbin/apachectl start ;; - 'stop') - /usr/sbin/apachectl stop ;; - 'restart') - /usr/sbin/apachectl restart ;; - *) - echo "usage $0 start|stop|restart" ;; -esac - diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.inet2 b/templates/vserver/vserver.d/etc/rc.d/rc.inet2 deleted file mode 100755 index db56589..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.inet2 +++ /dev/null @@ -1,129 +0,0 @@ -#!/bin/sh -# -# rc.inet2 This shell script boots up the entire network system. -# Note, that when this script is used to also fire -# up any important remote NFS disks (like the /usr -# directory), care must be taken to actually -# have all the needed binaries online _now_ ... -# -# Uncomment or comment out sections depending on which -# services your site requires. -# -# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org> -# Modified for Slackware by Patrick Volkerding <volkerdi@slackware.com> - - -# At this point, we are ready to talk to The World... - - -# Mount remote (NFS) filesystems: -if cat /etc/fstab | grep -v '^#' | grep -w nfs 1> /dev/null 2> /dev/null ; then - # Start the RPC portmapper if we find NFS volumes defined in /etc/fstab, - # since it will need to be running in order to mount them. If portmap - # is not running, attempting to mount an NFS partition will cause mount - # to hang. Keep this in mind if you plan to mount unlisted partitions... - if [ -x /etc/rc.d/rc.portmap ]; then - . /etc/rc.d/rc.portmap start - else - # Warn about a possible NFS problem. It's also possible to mount NFS partitions - # without rpc.portmap by using '-o nolock' (not a good idea in most cases). - echo "WARNING: NFS partitions found in /etc/fstab, but /etc/rc.d/rc.portmap is" - echo " not executable. If you do not run portmap, NFS partitions will" - echo " not mount properly. To start rpc.portmap at boot, change the" - echo " permissions on /etc/rc.d/rc.portmap: chmod 755 /etc/rc.d/rc.portmap" - sleep 10 - fi - echo "Mounting remote (NFS) file systems: /sbin/mount -a -t nfs" - /sbin/mount -a -t nfs # This may be our /usr runtime! - # Show the mounted volumes: - /sbin/mount -v -t nfs -fi - -# Load the RPC portmapper if /etc/rc.d/rc.portmap is executable. -# This might be needed to mount NFS partitions that are not listed in /etc/fstab. -if [ -x /etc/rc.d/rc.portmap ]; then - . /etc/rc.d/rc.portmap start -fi - -# Mount remote (SMB) filesystems: -if cat /etc/fstab | grep -v '^#' | grep -w smbfs 1> /dev/null 2> /dev/null ; then - echo "Mounting remote (SMB) file systems: /sbin/mount -a -t smbfs" - /sbin/mount -a -t smbfs - # Show the mounted volumes: - /sbin/mount -v -t smbfs -fi - -# Start the system logger if it is not already running (maybe because /usr -# is on a network partition). -if [ -x /etc/rc.d/rc.syslog -a -d /var/log -a ! -r /var/run/syslogd.pid ]; then - . /etc/rc.d/rc.syslog start -fi - -# If there is a firewall script, run it before enabling packet forwarding. -# See the HOWTOs on http://www.netfilter.org/ for documentation on -# setting up a firewall or NAT on Linux. In some cases this might need to -# be moved past the section below dealing with IP packet forwarding. -if [ -x /etc/rc.d/rc.firewall ]; then - /etc/rc.d/rc.firewall start -fi - -# Turn on IPv4 packet forwarding support. -if [ -x /etc/rc.d/rc.ip_forward ]; then - . /etc/rc.d/rc.ip_forward start -fi - -# Start the inetd server: -if [ -x /etc/rc.d/rc.inetd ]; then - /etc/rc.d/rc.inetd start -fi - -# Start the OpenSSH SSH daemon: -if [ -x /etc/rc.d/rc.sshd ]; then - echo "Starting OpenSSH SSH daemon: /usr/sbin/sshd" - /etc/rc.d/rc.sshd start -fi - -# Start the BIND name server daemon: -if [ -x /etc/rc.d/rc.bind ]; then - /etc/rc.d/rc.bind start -fi - -# Start NIS (the Network Information Service): -if [ -x /etc/rc.d/rc.yp ]; then - . /etc/rc.d/rc.yp start -fi - -# Start the NFS server. Note that for this to work correctly, you'll -# need to load the knfsd module for kernel NFS server support. -# You'll also need to set up some shares in /etc/exports, and be sure -# that /etc/rc.d/rc.portmap is executable. -# Starting the NFS server: -if [ -x /etc/rc.d/rc.nfsd ]; then - /etc/rc.d/rc.nfsd start -fi - -# Stuff you won't need follows. ;-) - -# # Start the network routing daemon: -# if [ -x /usr/sbin/routed ]; then -# echo "Starting network routing daemon: /usr/sbin/routed" -# /usr/sbin/routed -g -s -# fi - -# # Start the system status server: -# if [ -x /usr/sbin/rwhod ]; then -# echo "Starting system status server: /usr/sbin/rwhod" -# /usr/sbin/rwhod -# fi - -# # Fire up the PC-NFS daemon(s). This is a primarily obsolete system, and may -# # not be very secure. It's not at all needed for normal NFS server support. -# # You probably should not run this. -# if [ -x /usr/sbin/rpc.pcnfsd ]; then -# echo "Starting PC-NFS daemons: /usr/sbin/rpc.pcnfsd /usr/sbin/rpc.bwnfsd" -# /usr/sbin/rpc.pcnfsd /var/spool/lpd -# fi -# if [ -x /usr/sbin/rpc.bwnfsd ]; then -# /usr/sbin/rpc.bwnfsd /var/spool/lpd -# fi - diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.inetd b/templates/vserver/vserver.d/etc/rc.d/rc.inetd deleted file mode 100644 index 9fe1419..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.inetd +++ /dev/null @@ -1,36 +0,0 @@ -#!/bin/sh -# Start/stop/restart inetd, the BSD Internet super-daemon. - -# Start inetd: -inetd_start() { - if [ -x /usr/sbin/inetd ]; then - echo "Starting Internet super-server daemon: /usr/sbin/inetd" - /usr/sbin/inetd - fi -} - -# Stop inetd: -inetd_stop() { - killall inetd -} - -# Restart inetd: -inetd_restart() { - inetd_stop - sleep 1 - inetd_start -} - -case "$1" in -'start') - inetd_start - ;; -'stop') - inetd_stop - ;; -'restart') - inetd_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward b/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward deleted file mode 100644 index 52bd2fe..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward +++ /dev/null @@ -1,64 +0,0 @@ -#!/bin/sh -# /etc/rc.d/rc.ip_forward: start/stop IP packet forwarding -# -# If you intend to run your Linux box as a router, i.e. as a -# computer that forwards and redistributes network packets, you -# will need to enable IP packet forwarding in your kernel. -# -# To activate IP packet forwarding at boot time, make this -# script executable: chmod 755 /etc/rc.d/rc.ip_forward -# -# To disable IP packet forwarding at boot time, make this -# script non-executable: chmod 644 /etc/rc.d/rc.ip_forward - -# Start IP packet forwarding: -ip_forward_start() { - if [ -f /proc/sys/net/ipv4/ip_forward ]; then - echo "Activating IPv4 packet forwarding." - echo 1 > /proc/sys/net/ipv4/ip_forward - fi - # When using IPv4 packet forwarding, you will also get the - # rp_filter, which automatically rejects incoming packets if the - # routing table entry for their source address doesn't match the - # network interface they're arriving on. This has security - # advantages because it prevents the so-called IP spoofing, - # however it can pose problems if you use asymmetric routing - # (packets from you to a host take a different path than packets - # from that host to you) or if you operate a non-routing host - # which has several IP addresses on different interfaces. To - # turn rp_filter off, uncomment the lines below: - #if [ -r /proc/sys/net/ipv4/conf/all/rp_filter ]; then - # echo "Disabling rp_filter." - # echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter - #fi -} - -# Stop IP packet forwarding: -ip_forward_stop() { - if [ -f /proc/sys/net/ipv4/ip_forward ]; then - echo "Disabling IPv4 packet forwarding." - echo 0 > /proc/sys/net/ipv4/ip_forward - fi -} - -# Restart IP packet forwarding: -ip_forward_restart() { - ip_forward_stop - sleep 1 - ip_forward_start -} - -case "$1" in -'start') - ip_forward_start - ;; -'stop') - ip_forward_stop - ;; -'restart') - ip_forward_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac - diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.local b/templates/vserver/vserver.d/etc/rc.d/rc.local deleted file mode 100755 index 3cf2076..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.local +++ /dev/null @@ -1,5 +0,0 @@ -#!/bin/sh -# -# /etc/rc.d/rc.local: Local system initialization script. -# -# Put any local setup commands in here: diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.mysqld b/templates/vserver/vserver.d/etc/rc.d/rc.mysqld deleted file mode 100644 index 239e2e6..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.mysqld +++ /dev/null @@ -1,80 +0,0 @@ -#!/bin/sh -# Start/stop/restart mysqld. -# -# Copyright 2003 Patrick J. Volkerding, Concord, CA -# Copyright 2003 Slackware Linux, Inc., Concord, CA -# -# This program comes with NO WARRANTY, to the extent permitted by law. -# You may redistribute copies of this program under the terms of the -# GNU General Public License. - -# To start MySQL automatically at boot, be sure this script is executable: -# chmod 755 /etc/rc.d/rc.mysqld - -# Before you can run MySQL, you must have a database. To install an initial -# database, do this as root: -# -# su - mysql -# mysql_install_db -# -# Note that step one is becoming the mysql user. It's important to do this -# before making any changes to the database, or mysqld won't be able to write -# to it later (this can be fixed with 'chown -R mysql.mysql /var/lib/mysql'). - -# To disallow outside connections to the database (if you don't need them, this -# is recommended to increase security), uncomment the next line: -#SKIP="--skip-networking" - -# Start mysqld: -mysqld_start() { - if [ -x /usr/bin/mysqld_safe ]; then - # If there is an old PID file (no mysqld running), clean it up: - if [ -r /var/run/mysql/mysql.pid ]; then - if ! ps ax | grep mysqld 1> /dev/null 2> /dev/null ; then - echo "Cleaning up old /var/run/mysql/mysql.pid." - rm -f /var/run/mysql/mysql.pid - fi - fi - /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid $SKIP & - fi -} - -# Stop mysqld: -mysqld_stop() { - # If there is no PID file, ignore this request... - if [ -r /var/run/mysql/mysql.pid ]; then - killall mysqld - # Wait at least one minute for it to exit, as we don't know how big the DB is... - for second in 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 \ - 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 60 ; do - if [ ! -r /var/run/mysql/mysql.pid ]; then - break; - fi - sleep 1 - done - if [ "$second" = "60" ]; then - echo "WARNING: Gave up waiting for mysqld to exit!" - sleep 15 - fi - fi -} - -# Restart mysqld: -mysqld_restart() { - mysqld_stop - mysqld_start -} - -case "$1" in -'start') - mysqld_start - ;; -'stop') - mysqld_stop - ;; -'restart') - mysqld_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.postfix b/templates/vserver/vserver.d/etc/rc.d/rc.postfix deleted file mode 100644 index bc32367..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.postfix +++ /dev/null @@ -1,45 +0,0 @@ -#!/bin/sh -# -## Slackware init script for postfix -## 20030828 Manolis Tzanidakis -# - -postfix_start() { - if [ -x /usr/sbin/postfix ]; then - echo -n "Starting postfix MTA: " - echo "/usr/sbin/postfix start" - /usr/sbin/postfix start 2>/dev/null - fi -} - -postfix_stop() { - /usr/sbin/postfix stop 2>/dev/null -} - -postfix_restart() { - sh $0 stop - sleep 1 - sh $0 start -} - -postfix_reload() { - /usr/sbin/postfix reload 2>/dev/null -} - -case "$1" in - 'start') - postfix_start - ;; - 'stop') - postfix_stop - ;; - 'restart') - postfix_restart - ;; - 'reload') - postfix_reload - ;; - *) - echo "usage $0 start|stop|restart|reload" -esac - diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.sendmail b/templates/vserver/vserver.d/etc/rc.d/rc.sendmail deleted file mode 100644 index 1a31c52..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.sendmail +++ /dev/null @@ -1,38 +0,0 @@ -#!/bin/sh -# Start/stop/restart sendmail. - -# Start sendmail: -sendmail_start() { - if [ -x /usr/sbin/sendmail ]; then - echo "Starting sendmail MTA daemon: /usr/sbin/sendmail -L sm-mta -bd -q25m" - /usr/sbin/sendmail -L sm-mta -bd -q25m - echo "Starting sendmail MSP queue runner: /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m" - /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m - fi -} - -# Stop sendmail: -sendmail_stop() { - killall sendmail -} - -# Restart sendmail: -sendmail_restart() { - sendmail_stop - sleep 1 - sendmail_start -} - -case "$1" in -'start') - sendmail_start - ;; -'stop') - sendmail_stop - ;; -'restart') - sendmail_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.serial b/templates/vserver/vserver.d/etc/rc.d/rc.serial deleted file mode 100755 index 5f31c01..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.serial +++ /dev/null @@ -1,132 +0,0 @@ -# -# /etc/rc.serial -# Initializes the serial ports on your system -# -# chkconfig: 2345 50 75 -# description: This initializes the settings of the serial port -# -# FILE_VERSION: 19981128 -# -# Distributed with setserial and the serial driver. We need to use the -# FILE_VERSION field to assure that we don't overwrite a newer rc.serial -# file with a newer one. -# -# XXXX For now, the autosave feature doesn't work if you are -# using the multiport feature; it doesn't save the multiport configuration -# (for now). Autosave also doesn't work for the hayes devices. -# - -RCLOCKFILE=/var/lock/subsys/serial -DIRS="/lib/modules/`uname -r`/misc /lib/modules /usr/lib/modules ." -PATH=/bin:/sbin:/usr/bin -DRIVER=serial -DRIVER_NAME=serial -MODULE_REGEXP="serial\b" - -ALLDEVS="/dev/ttyS?" -if /bin/ls /dev/ttyS?? >& /dev/null ; then - ALLDEVS="$ALLDEVS /dev/ttyS??" -fi - -SETSERIAL="" -if test -x /bin/setserial ; then - SETSERIAL=/bin/setserial -elif test -x /sbin/setserial ; then - SETSERIAL=/sbin/setserial -fi - -# -# See if the serial driver is loaded -# -LOADED="" -if test -f /proc/devices; then - if grep -q " ttyS$" /proc/devices ; then - LOADED="yes" - else - LOADED="no" - fi -fi - -# -# Find the serial driver -# -for i in $DIRS -do - if test -z "$MODULE" -a -f $i/$DRIVER.o ; then - MODULE=$i/$DRIVER.o - fi -done - -if ! test -f /proc/modules ; then - MODULE="" -fi - -# -# Handle System V init conventions... -# -case $1 in -start) - action="start"; - ;; -stop) - action="stop"; - ;; -*) - action="start"; -esac - -if test $action = stop ; then - if test -n ${SETSERIAL} -a "$LOADED" != "no" -a \ - `head -1 /etc/serial.conf`X = "###AUTOSAVE###X" ; then - echo -n "Saving state of serial devices... " - grep "^#" /etc/serial.conf > /etc/.serial.conf.new - ${SETSERIAL} -G -g ${ALLDEVS} >> /etc/.serial.conf.new - mv /etc/serial.conf /etc/.serial.conf.old - mv /etc/.serial.conf.new /etc/serial.conf - echo "done." - fi - if test -n "$MODULE" ; then - module=`grep $MODULE_REGEXP /proc/modules | awk '{print $1}'` - if test -z "$module" ; then - echo "The $DRIVER_NAME driver is not loaded." - rm -f ${RCLOCKFILE} - exit 0 - fi - if rmmod $module ; then :; else - echo "The $DRIVER_NAME driver could NOT be unloaded." - exit 1; - fi - echo "The $DRIVER_NAME driver has been unloaded." - fi - rm -f ${RCLOCKFILE} - exit 0 -fi - -# -# If not stop, it must be a start.... -# - -if test -n "$MODULE" -a "$LOADED" != "yes" ; then - if insmod -f $MODULE $DRIVER_ARG ; then - true - else - echo "Couldn't load $DRIVER_NAME driver." - exit 1 - fi -fi - -if test -f /etc/serial.conf ; then - if test -n ${SETSERIAL} ; then - grep -v ^# < /etc/serial.conf | while read device args - do - if [ ! "$device" = "" -a ! "$args" = "" ]; then - ${SETSERIAL} -z $device $args - fi - done - fi -else - echo "###AUTOSAVE###" > /etc/serial.conf -fi - -touch ${RCLOCKFILE} -${SETSERIAL} -bg ${ALLDEVS} diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.sshd b/templates/vserver/vserver.d/etc/rc.d/rc.sshd deleted file mode 100755 index a3707e3..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.sshd +++ /dev/null @@ -1,50 +0,0 @@ -#!/bin/sh -# Start/stop/restart the secure shell server: - -sshd_start() { - # Create host keys if needed. - if [ ! -r /etc/ssh/ssh_host_key ]; then - /usr/bin/ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N '' - fi - if [ ! -f /etc/ssh/ssh_host_dsa_key ]; then - /usr/bin/ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N '' - fi - if [ ! -f /etc/ssh/ssh_host_rsa_key ]; then - /usr/bin/ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N '' - fi - /usr/sbin/sshd -} - -sshd_stop() { - killall sshd -} - -sshd_restart() { - if [ -r /var/run/sshd.pid ]; then - echo "WARNING: killing listener process only. To kill every sshd process, you must" - echo " use 'rc.sshd stop'. 'rc.sshd restart' kills only the parent sshd to" - echo " allow an admin logged in through sshd to use 'rc.sshd restart' without" - echo " being cut off. If sshd has been upgraded, new connections will now" - echo " use the new version, which should be a safe enough approach." - kill `cat /var/run/sshd.pid` - else - killall sshd - fi - sleep 1 - sshd_start -} - -case "$1" in -'start') - sshd_start - ;; -'stop') - sshd_stop - ;; -'restart') - sshd_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac - diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.syslog b/templates/vserver/vserver.d/etc/rc.d/rc.syslog deleted file mode 100755 index a005fb7..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.syslog +++ /dev/null @@ -1,42 +0,0 @@ -#!/bin/sh -# Start/stop/restart the system logging daemons. -# -# Written for Slackware Linux by Patrick J. Volkerding <volkerdi@slackware.com>. - -syslogd_start() { - if [ -x /usr/sbin/syslogd -a -x /usr/sbin/klogd ]; then - echo -n "Starting sysklogd daemons: " - echo -n "/usr/sbin/syslogd " - /usr/sbin/syslogd - sleep 1 # prevent syslogd/klogd race condition on SMP kernels - echo "/usr/sbin/klogd -c 3 -x" - # '-c 3' = display level 'error' or higher messages on console - # '-x' = turn off broken EIP translation - /usr/sbin/klogd -c 3 -x - fi -} - -syslogd_stop() { - killall syslogd 2> /dev/null - killall klogd 2> /dev/null -} - -syslogd_restart() { - syslogd_stop - sleep 1 - syslogd_start -} - -case "$1" in -'start') - syslogd_start - ;; -'stop') - syslogd_stop - ;; -'restart') - syslogd_restart - ;; -*) - echo "usage $0 start|stop|restart" -esac diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.sysvinit b/templates/vserver/vserver.d/etc/rc.d/rc.sysvinit deleted file mode 100755 index 916e59e..0000000 --- a/templates/vserver/vserver.d/etc/rc.d/rc.sysvinit +++ /dev/null @@ -1,58 +0,0 @@ -#!/bin/sh -# -# rc.sysvinit This file provides basic compatibility with SystemV style -# startup scripts. The SystemV style init system places -# start/stop scripts for each runlevel into directories such as -# /etc/rc.d/rc3.d/ (for runlevel 3) instead of starting them -# from /etc/rc.d/rc.M. This makes for a lot more init scripts, -# and a more complicated execution path to follow through if -# something goes wrong. For this reason, Slackware has always -# used the traditional BSD style init script layout. -# -# However, many binary packages exist that install SystemV -# init scripts. With rc.sysvinit in place, most well-written -# startup scripts will work. This is primarily intended to -# support commercial software, though, and probably shouldn't -# be considered bug free. -# -# Written by Patrick Volkerding <volkerdi@slackware.com>, 1999 -# from an example by Miquel van Smoorenburg <miquels@cistron.nl>. - -# Run an init script: -startup() { - case "$1" in - *.sh) - sh "$@" - ;; - *) - "$@" - ;; - esac -} - -# Set onlcr to avoid staircase effect. -stty onlcr 0>&1 - -if [ "$runlevel" = "" ]; then - runlevel=$RUNLEVEL - export runlevel - prevlevel=$PREVLEVEL - export prevlevel -fi - -# Run kill scripts in the previous runlevel if not "none" -if [ ! "$prevlevel" = "N" ]; then - for script in /etc/rc.d/rc$prevlevel.d/K* ; do - if [ -x $script ]; then - startup $script stop - fi - done -fi - -# Now do the startup scripts: -for script in /etc/rc.d/rc$runlevel.d/S* ; do - if [ -x $script ]; then - startup $script start - fi -done - diff --git a/templates/vserver/vserver.d/etc/rssh.conf b/templates/vserver/vserver.d/etc/rssh.conf deleted file mode 100644 index a74acc6..0000000 --- a/templates/vserver/vserver.d/etc/rssh.conf +++ /dev/null @@ -1,48 +0,0 @@ -# This is the default rssh config file - -# set the log facility. "LOG_USER" and "user" are equivalent. -logfacility = LOG_USER - -# Leave these all commented out to make the default action for rssh to lock -# users out completely... - -allowscp -allowsftp -#allowcvs -#allowrdist -#allowrsync - -# set the default umask -umask = 022 - -# If you want to chroot users, use this to set the directory where the root of -# the chroot jail will be located. -# -# if you DO NOT want to chroot users, LEAVE THIS COMMENTED OUT. -# You can quote anywhere, but quotes not required unless path contains a -# space... as in this example. - -chrootpath = "/var/users" - -########################################## -# EXAMPLES of configuring per-user options - -#user=rudy:077:00010: # the path can simply be left out to not chroot -#user=rudy:077:00010 # the ending colon is optional - -#spaces in the path must be quoted... -#user=rudy:011:00001:"/usr/local/chroot dir" # scp with chroot -#user=rudy:011:00010:"/usr/local/chroot dir" # sftp with chroot -#user=rudy:011:00011:"/usr/local/chroot dir" # both with chroot -#user=rudy:011:00100: # cvs, with no chroot -#user=rudy:011:01000: # rdist, with no chroot -#user=rudy:011:10000: # rsync, with no chroot -#user="rudy:011:00001:/usr/local/chroot" # whole user string can be quoted -#user=rudy:01"1:00001:/usr/local/chroot" # or somewhere in the middle, freak! -#user=rudy:'011:00001:/usr/local/chroot' # single quotes too - -# Spaces before or after the '=' are fine, but spaces in chrootpath need -# quotes. -#user = "rudy:011:00001:/usr/local/chroot dir" -#user = "rudy:011:00001:/usr/local/chroot dir" # neither do comments at line end - diff --git a/templates/vserver/vserver.d/etc/ssh/sshd_config b/templates/vserver/vserver.d/etc/ssh/sshd_config deleted file mode 100644 index a161fec..0000000 --- a/templates/vserver/vserver.d/etc/ssh/sshd_config +++ /dev/null @@ -1,103 +0,0 @@ -# $OpenBSD: sshd_config,v 1.69 2004/05/23 23:59:53 dtucker Exp $ - -# This is the sshd server system-wide configuration file. See -# sshd_config(5) for more information. - -# This sshd was compiled with PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin - -# The strategy used for options in the default sshd_config shipped with -# OpenSSH is to specify options with their default value where -# possible, but leave them commented. Uncommented options change a -# default value. - -#Port 22 -#Protocol 2,1 -#ListenAddress 0.0.0.0 -#ListenAddress :: - -# HostKey for protocol version 1 -#HostKey /etc/ssh/ssh_host_key -# HostKeys for protocol version 2 -#HostKey /etc/ssh/ssh_host_rsa_key -#HostKey /etc/ssh/ssh_host_dsa_key - -# Lifetime and size of ephemeral version 1 server key -#KeyRegenerationInterval 1h -#ServerKeyBits 768 - -# Logging -#obsoletes QuietMode and FascistLogging -#SyslogFacility AUTH -#LogLevel INFO - -# Authentication: - -#LoginGraceTime 2m -PermitRootLogin no -#StrictModes yes -#MaxAuthTries 6 - -#RSAAuthentication yes -#PubkeyAuthentication yes -#AuthorizedKeysFile .ssh/authorized_keys - -# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -#RhostsRSAAuthentication no -# similar for protocol version 2 -#HostbasedAuthentication no -# Change to yes if you don't trust ~/.ssh/known_hosts for -# RhostsRSAAuthentication and HostbasedAuthentication -#IgnoreUserKnownHosts no -# Don't read the user's ~/.rhosts and ~/.shosts files -#IgnoreRhosts yes - -# To disable tunneled clear text passwords, change to no here! -#PasswordAuthentication yes -#PermitEmptyPasswords no - -# Change to no to disable s/key passwords -#ChallengeResponseAuthentication yes - -# Kerberos options -#KerberosAuthentication no -#KerberosOrLocalPasswd yes -#KerberosTicketCleanup yes -#KerberosGetAFSToken no - -# GSSAPI options -#GSSAPIAuthentication no -#GSSAPICleanupCredentials yes - -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will -# be allowed through the ChallengeResponseAuthentication mechanism. -# Depending on your PAM configuration, this may bypass the setting of -# PasswordAuthentication, PermitEmptyPasswords, and -# "PermitRootLogin without-password". If you just want the PAM account and -# session checks to run without PAM authentication, then enable this but set -# ChallengeResponseAuthentication=no -#UsePAM no - -#AllowTcpForwarding yes -#GatewayPorts no -#X11Forwarding no -#X11DisplayOffset 10 -#X11UseLocalhost yes -#PrintMotd yes -#PrintLastLog yes -#TCPKeepAlive yes -#UseLogin no -#UsePrivilegeSeparation yes -#PermitUserEnvironment no -#Compression yes -#ClientAliveInterval 0 -#ClientAliveCountMax 3 -#UseDNS yes -#PidFile /var/run/sshd.pid -#MaxStartups 10 - -# no default banner path -#Banner /some/path - -# override default of no subsystems -Subsystem sftp /usr/libexec/sftp-server diff --git a/templates/vserver/vserver.d/var/www/htdocs/missing.html b/templates/vserver/vserver.d/var/www/htdocs/missing.html deleted file mode 100644 index b2eec17..0000000 --- a/templates/vserver/vserver.d/var/www/htdocs/missing.html +++ /dev/null @@ -1,12 +0,0 @@ -<html> -<head> -<title>404 - Not Found</title> -</head> -<body> - <center> - <pre> - O endereço que você requisitou não pôde ser encontrado :( - </pre> - </center> -</body> -</html> diff --git a/templates/vserver/vserver.d/var/www/missing.html b/templates/vserver/vserver.d/var/www/missing.html deleted file mode 100644 index b2eec17..0000000 --- a/templates/vserver/vserver.d/var/www/missing.html +++ /dev/null @@ -1,12 +0,0 @@ -<html> -<head> -<title>404 - Not Found</title> -</head> -<body> - <center> - <pre> - O endereço que você requisitou não pôde ser encontrado :( - </pre> - </center> -</body> -</html> diff --git a/templates/vserver/vserver.s/GPG-KEY b/templates/vserver/vserver.s/GPG-KEY deleted file mode 100644 index fd23e95..0000000 --- a/templates/vserver/vserver.s/GPG-KEY +++ /dev/null @@ -1,88 +0,0 @@ -security@slackware.com public key - -Type bits/keyID Date User ID -pub 1024D/40102233 2003-02-26 Slackware Linux Project <security@slackware.com> -sub 1024g/4E523569 2003-02-26 [expires: 2012-12-21] - ------BEGIN PGP PUBLIC KEY BLOCK----- -Version: GnuPG v1.2.1 (GNU/Linux) - -mQGiBD5dIFQRBADB31WinbXdaGk/8RNkpnZclu1w3Xmd5ItACDLB2FhOhArw35EA -MOYzxI0gRtDNWN4pn9n74q4HbFzyRWElThWRtBTYLEpImzrk7HYVCjMxjw5A0fTr -88aiHOth5aS0vPAoq+3TYn6JDSipf2bR03G2JVwgj3Iu066pX4naivNm8wCgldHG -F3y9vT3UPYh3QFgEUlCalt0D/3n6NopRYy0hMN6BPu+NarXwv6NQ9g0GV5FNjEEr -igkrD/htqCyWAUl8zyCKKUFZZx4UGBRZ5guCdNzwgYH3yn3aVMhJYQ6tcSlLsj3f -JIz4LAZ3+rI77rbn7gHHdp7CSAuV+QHv3aNanUD/KGz5SPSvF4w+5qRM4PfPNT1h -LMV8BACzxiyX7vzeE4ZxNYvcuCtv0mvEHl9yD66NFA35RvXaO0QiRVYeoUa5JOQZ -gwq+fIB0zgsEYDhXFkC1hM/QL4NccMRk8C09nFn4eiz4dAEnwKt4rLCJKhkLl1DW -TSoXHe/dOXaLnFyLzB1J8hEYmUvw3SwPt//wMqDiVBLeZfFcdLQwU2xhY2t3YXJl -IExpbnV4IFByb2plY3QgPHNlY3VyaXR5QHNsYWNrd2FyZS5jb20+iF8EExECAB8F -Aj5dIFQFCRJ3owAECwcDAgMVAgMDFgIBAh4BAheAAAoJEGpEY8BAECIzee0An3My -boalJ5nLePD0HCzMuf8Ix8gPAJ9lnU1wqNVGza0t89ACTurDoppQ2rkBDQQ+XSBV -EAQA3VYlpPyRKdOKoM6t1SwNG0YgVFSvxy/eiratBf7misDBsJeH86Pf8H9OfVHO -cqscLiC+iqvDgqeTUX9vASjlnvcoS/3H5TDPlxiifIDggqd2euNtJ8+lyXRBV6yP -sBIA6zki9cR4zphe48hKpSsDfj7uL5sfyc2UmKKboSu3x7cAAwUD/1jmoLQs9bIt -bTosoy+5+Uzrl0ShRlv+iZV8RPzAMFuRJNxUJkUmmThowtXRaPKFI9AVd+pP44aA -J+zxCPtS2isiW20AxubJoBPpXcVatJWi4sG+TM5Z5VRoLg7tIDNVWsyHGXPAhIG2 -Y8Z1kyWwb4P8A/W2b1ZCqS7Fx4yEhTikiEwEGBECAAwFAj5dIFUFCRJ3owAACgkQ -akRjwEAQIjM1uwCdE7V4mPCqdby/nV699NxKX0iW/OsAniaVhEip8Ptff74Sv4JV -tb+Sth2l -=H5uu ------END PGP PUBLIC KEY BLOCK----- - -slamd64 public key - ------BEGIN PGP PUBLIC KEY BLOCK----- -Version: GnuPG v1.2.6 (GNU/Linux) - -mQGiBELKSBYRBACiElxGMXqxUwdsQBKPngV6/k0Q5AYT34+WLL0B7XRR9kOotCfc -PTLCP5qLM9etpzKhbMbgWGpaBrA/3KEPOJ7JVhk6JcLgjoi0QsMusaI4BGnmrxkw -3mh9xPwc+jPgiYOljbZhNG6FMQtrdlKYV+BmwS8mt/YBymShghtlgdHJjwCg/PAG -YJDsfoG1ebuwcjYlsGoD2x0EAJX7UnTdxxESvmIuk172MunZqw+o8+o/W684z13/ -wOkcVqvuAcd0ejuY0z09GFfyhtig8E55UcKNyVC50+3aJUXlt9//HnENHZo+OEN1 -ezbOXUcJIw8xkU551qaxubqWXtKYEJP9z/khVPe4N0JW2vWOcAFYhuOEx1ylaNrX -gUY4BACDpn+pntq0ooZqkSPT4v1ibOQg/3xh2F1PgsnOahMRrXbVEdL9ItsVnHM/ -ygHBjLhkEMd612nVVSw1BYMBAwQbsYB8Lgn1QxXl0ISBYR1RYW1LvyaJM6A6TDL+ -EdWp+iTtlKOe/VD+oCfHmMONoucZJM2AtK1vXTX3x4Wb4MgVdLQoRnJlZGVyaWNr -IEVtbW90dCA8bWFpbEBmcmVkZW1tb3R0LmNvLnVrPohkBBMRAgAkBQJCykgWAhsD -BQkDwmcABgsJCAcDAgMVAgMDFgIBAh4BAheAAAoJEAd5Da1T/acLGfIAoOqIHrg4 -r2pq/tKi9VifOJS1xg4LAKDpi0I0pzsdDJ2owxCQ88MkoSDKgohMBBARAgAMBQJD -Ed/tBYMDes8pAAoJEFgpV1AFAIOLprQAnRDVVmDPnzVNOWrZ8D55gG2bOwkxAKCl -dGThnu0aQ0IEL7MgUETGtk4hS4iiBBABAgAMBQJDEdpDBYMDetTTAAoJEJugaRW/ -hasxqCwEAKczPTgOrRXXTs4piB14DayJQVgoqVgiNfKzd5qVuvQgYebQrMu7hi5U -0q/n6TbQpjmMDZKxhXhEY1gs32mtzKKDrerTpF+pJAgQVvBLZS2mF4HbVnU74GvL -2UKJtEtgb9u+i1Efd4Q8GIJUzLLJifURQWTk1e3B9qGApKXpWJlviEwEEBECAAwF -AkMR75MFgwN6v4MACgkQTqjEwhXvPN1j7gCbBXZs9MM6YXGI/yTlEhiXyTECxm8A -nj6O1XszSa5kaD7CvnRFzNkm5O5MiEwEEBECAAwFAkMR79UFgwN6v0EACgkQoLYC -8AehV8eLBQCgv8WEdBtFjTh3Wl06WK5dKCw0nHsAn0IIHRbJC5jO4NWrIpupBMnz -3fBsiEwEExECAAwFAkMR9ggFgwN6uQ4ACgkQR+ny47i1wzAfZQCfRACyfYBxs+tu -6OzpLP2DGjEaa1UAnj4MVMH32f/34oN6o9dPKPT8HXWziEwEExECAAwFAkMR9vcF -gwN6uB8ACgkQB0u7y43syeIaogCfVy7lqRjRDbttJs1u1g3FekdbJ1kAnRo726tA -u8Xf+JWD3OrmMo0Uup3giEwEEBECAAwFAkMR+qgFgwN6tG4ACgkQfWXW5We1ioQk -tgCePGa3NpcfEWb8drmO95Mp1C+FaBIAoNEqA89xUvTIpqooucTzFxgAupVgiEwE -EBECAAwFAkMSF+UFgwN6lzEACgkQ/lREvmcCFhscDQCgnMxf4Nmu3B41GWupTWxb -9b+te5sAoIiTZHzOSKtqN4cJ2i22iP/vZPt4iEwEEBECAAwFAkMULeAFgwN4gTYA -CgkQsxZ93p+gHn6bcACgwY/5ZpvvEK+eycM5XNQhVI6w4j8An0JoXlFaGStIzUmW -42obaW6CG4WViEYEExECAAYFAkMUZuAACgkQGnR+RTDgudhG1QCeJelEhnX/3JeW -S5BaM7640suSeLQAnA2RDMH4zIJLI4MWEXBAvaA0lSr7iEwEEBECAAwFAkMUP8gF -gwN4b04ACgkQM/XwBW70U1iAOwCgmah/GnZikIhyeFr6KsKpsmZCQTQAn3Vs7JZm -w4qBLiI+RXxw7vIJlI4AiEwEEBECAAwFAkMUZ9EFgwN4R0UACgkQ72KcVAmwbhAC -FACgiNqao9mzAWZBjIY7iiqz34gbK/QAn34F1bLAb0sHKiSUcFkVi/uZ8R0viEwE -EBECAAwFAkMWFj8FgwN2mNcACgkQn3j4POjENGF+UgCeM+mEKW5+MjNN17QCAvZi -cBVJEHMAn14YyvdSIwBBFUNPWYOw7GwYyAhHiEwEEBECAAwFAkMXW0cFgwN1U88A -CgkQTxqZjtpq5iG4PwCfe2ymOYh5t+bEZGGCtJg3sWJ5hHYAmQGS+jGWcTMlXSe+ -65o/aPfLUkMQuQINBELKSCgQCADjG+pX7C0sRIkX1QQ6lFW3IrajWypXtd4jO1TA -dlLFES7OxF202V15+TRtL9NO34x7u6RPTnF7wi/i2U1dqM9ZjrFcTJA17Y7+OLH+ -yw64/5OJapUi48qI7hnLRTPykz0c+b92pUt1X/BIWmf301jbZ0AbFZV4yvm1OUH4 -wrGLLFeATjiBWTcJarRiR89DzQ/Cm+c791WXdIhEvv5Vp4/d8HzGZhEUVKTCoA3e -Z8ZIdJoy/d7FYfyeg836UDXEqr598n2p9DxMwkRj5oHINB64CrQuKr7zDdP8Zv2g -vKkjeS4mN+07saWK3UTY5ADByNVHSu+P0LZYPhxjze7KOVjHAAUTCACa5ohR/7/N -x2M2OB9VPAwQPjAFNst6fPotcFLDy5Q/jlbBcDNf1OdzgkE/06z7iPGRmIJL6flz -QZH+hYwDqjulVVtPQXiZMVGvlfC9YIAdJX/1Ca2L9mL4c4IBQbFNkSlgkLaPTwUJ -BD2PnA+q+ERy39UANhIR/LVGltK1krDds8CwbxMSYNFvFgf4dmh6GzI5ioByDoTM -8ShfS2GjAekviNVLsGC5UWKuQl/XVaC/j7CTAT7WbikfXWI2uonFBx47vjf2UaPa -E0HnAVwDY0cAZeaObpDKvyogsf8H4CzK9JCKtW9aTUpKurEpyHfcKqB07GMLC/+Q -QiA3bFmrSaTRiE8EGBECAA8FAkLKSCgCGwwFCQPCZwAACgkQB3kNrVP9pwsejwCg -gaQm6lU/H7ja0EUaJJFZnRoqRvAAnRK8CC4PIr/ZYDjd+aeS3R31FjGr -=D1wm ------END PGP PUBLIC KEY BLOCK----- diff --git a/templates/vserver/vserver.s/devices.tar.gz b/templates/vserver/vserver.s/devices.tar.gz Binary files differdeleted file mode 100644 index dc4aea6..0000000 --- a/templates/vserver/vserver.s/devices.tar.gz +++ /dev/null diff --git a/templates/vserver/vserver.s/vserver.sh b/templates/vserver/vserver.s/vserver.sh deleted file mode 100644 index e9d68a9..0000000 --- a/templates/vserver/vserver.s/vserver.sh +++ /dev/null @@ -1,55 +0,0 @@ -#!/bin/bash -# -# vserver template script -# - -BASE="/etc/simplepkg/templates/vserver/vserver.s" -DEVICES="$BASE/devices.tar.gz" -GPGKEY="$BASE/GPG-KEY" - -if [ -z "$2" ]; then - echo "usage: `basename $0` <jail-root> <jail-name>" - exit 1 -elif [ ! -d "$1/$2" ]; then - echo "folder $1/$2 does not exist" - exit 1 -fi - -echo "creating /etc/vservers/$2..." -mv $1/$2 $1/$2.old -vserver $2 build -m skeleton --force &> /dev/null -result="$?" -rm -rf $1/$2 && mv $1/$2.old $1/$2 - -if [ "$result" != "0" ]; then - mkdir -p /etc/vservers/$2/apps/init -fi - -echo sysv > /etc/vservers/$2/apps/init/style -echo 3 > /etc/vservers/$2/apps/init/runlevel.start -echo 6 > /etc/vservers/$2/apps/init/runlevel.stop - -cp /etc/resolv.conf $1/$2/etc/ -cp /etc/localtime $1/$2/etc/ -echo /dev/hdv1 / ext2 defaults 1 1 > $1/$2/etc/fstab -echo /dev/hdv1 / ext2 rw 0 0 > $1/$2/etc/mtab - -echo "creating devices and dependencies..." -if [ -f "$DEVICES" ]; then - cd $1/$2/ - tar zxvf $DEVICES - chroot $1/$2/ sbin/ldconfig -else - echo error: device template $DEVICES not found -fi - -if [ -f "$GPGKEY" ]; then - echo "importing slack gpg pubkey" - mkdir $1/$2/root/.gnupg - gpg --homedir $1/$2/root/.gnupg --import $GPGKEY -fi - -# todo: add rebootmgr -echo "done; now config your vserver at /etc/vservers/$2" -echo "then, set all desired iptables rules and other stuff and then start $server vserver" -echo "dont forget to change root's password with the command "vserver $2 exec passwd"" diff --git a/templates/vserver/vserver.template b/templates/vserver/vserver.template deleted file mode 100644 index 0cd1f69..0000000 --- a/templates/vserver/vserver.template +++ /dev/null @@ -1,250 +0,0 @@ -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: A1 (Base Linux series) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -aaa_base: ADD -aaa_elflibs: ADD -bash: ADD -bin: ADD -bzip2: ADD -coreutils: ADD -cxxlibs: ADD -dcron: ADD -elvis: ADD -etc: ADD -findutils: ADD -gawk: ADD -gettext: REC -grep: ADD -gzip: ADD -infozip: ADD -less: ADD -logrotate: ADD -openssl-solibs: ADD -pkgtools: ADD -procps: ADD -sed: ADD -shadow: ADD -slocate: ADD -sysklogd: ADD -sysvinit: ADD -tar: ADD -util-linux: ADD -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: AP1 (Applications series) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -bc: OPT -diffutils: REC -jed: OPT -joe: OPT -jove: OPT -lsof: OPT -mysql: OPT -sudo: OPT -glibc: REC -# Tagfile for emacs series -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: F1 (Frequently Asked Questions) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -libidn: REC -libxml2: REC -mhash: REC -# This is a Slackware Installation Tagfile. -# -# This one comes from the N (Network/UUCP/Mail/News) series. -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# -apache: OPT -curl: OPT -gnupg: OPT -inetd: REC -lftp: OPT -lynx: OPT -mod_ssl: OPT -mailx: REC -openssh: REC -openssl: REC -php: OPT -rsync: OPT -stunnel: OPT -tcpip: REC -wget: OPT -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: TCL1 (Tcl/Tk series) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: Y1 (Yaaaaaahhoooo? Games and Amusements). -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# extra -# libsafe -# contrib -simplepkg -ssmtp |