changed repository layout to trunk/, tags/ and branches/ scheme

git-svn-id: svn+slack://slack.fluxo.info/var/svn/simplepkg@181 04377dda-e619-0410-9926-eae83683ac58

72 files changed, 0 insertions, 10129 deletions

diff --git a/templates/openoffice/openoffice.d/etc/profile.d/lang.csh b/templates/openoffice/openoffice.d/etc/profile.d/lang.csh
deleted file mode 100755
index 94e8a92..0000000
--- a/templates/openoffice/openoffice.d/etc/profile.d/lang.csh
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/csh
-# Set the system locale.  (no, we don't have a menu for this ;-)
-# For a list of locales which are supported by this machine, type:
-#   locale -a
-
-# en_US is the Slackware default locale:
-setenv LANG pt_BR
-
-# 'C' is the old Slackware (and UNIX) default, which is 127-bit
-# ASCII with a charmap setting of ANSI_X3.4-1968.  These days,
-# it's better to use en_US or another modern $LANG setting to
-# support extended character sets.
-#setenv LANG C
-
-# There is also support for UTF-8 locales, but be aware that
-# some programs are not yet able to handle UTF-8 and will fail to
-# run properly.  In those cases, you can set LANG=C before
-# starting them.  Still, I'd avoid UTF unless you actually need it.
-#setenv LANG en_US.UTF-8
-
-# Another option for en_US:
-#setenv LANG en_US.ISO8859-1
-
-# One side effect of the newer locales is that the sort order
-# is no longer according to ASCII values, so the sort order will
-# change in many places.  Since this isn't usually expected and
-# can break scripts, we'll stick with traditional ASCII sorting.
-# If you'd prefer the sort algorithm that goes with your $LANG
-# setting, comment this out.
-setenv LC_COLLATE C
-
-# End of /etc/profile.d/lang.csh
-
diff --git a/templates/openoffice/openoffice.d/etc/profile.d/lang.sh b/templates/openoffice/openoffice.d/etc/profile.d/lang.sh
deleted file mode 100755
index c9cde20..0000000
--- a/templates/openoffice/openoffice.d/etc/profile.d/lang.sh
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/sh
-# Set the system locale.  (no, we don't have a menu for this ;-)
-# For a list of locales which are supported by this machine, type:
-#   locale -a
-
-# en_US is the Slackware default locale:
-export LANG=pt_BR
-
-# 'C' is the old Slackware (and UNIX) default, which is 127-bit
-# ASCII with a charmap setting of ANSI_X3.4-1968.  These days,
-# it's better to use en_US or another modern $LANG setting to
-# support extended character sets.
-#export LANG=C
-
-# There is also support for UTF-8 locales, but be aware that
-# some programs are not yet able to handle UTF-8 and will fail to
-# run properly.  In those cases, you can set LANG=C before
-# starting them.  Still, I'd avoid UTF unless you actually need it.
-#export LANG=en_US.UTF-8
-
-# Another option for en_US:
-#export LANG=en_US.ISO8859-1
-
-# One side effect of the newer locales is that the sort order
-# is no longer according to ASCII values, so the sort order will
-# change in many places.  Since this isn't usually expected and
-# can break scripts, we'll stick with traditional ASCII sorting.
-# If you'd prefer the sort algorithm that goes with your $LANG
-# setting, comment this out.
-export LC_COLLATE=C
-
-# End of /etc/profile.d/lang.sh
-
diff --git a/templates/openoffice/openoffice.d/opt/OpenOffice.org b/templates/openoffice/openoffice.d/opt/OpenOffice.org
deleted file mode 120000
index 7146afd..0000000
--- a/templates/openoffice/openoffice.d/opt/OpenOffice.org
+++ /dev/null
@@ -1 +0,0 @@
-../opt2/OpenOffice.org
\ No newline at end of file
diff --git a/templates/openoffice/openoffice.s/post-install.sh b/templates/openoffice/openoffice.s/post-install.sh
deleted file mode 100755
index 086c7a4..0000000
--- a/templates/openoffice/openoffice.s/post-install.sh
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/bash
-
-if [ -z "$2" ]; then
-  echo "usage: `basename $0` <jail-root> <jail-name>"
-  exit 1
-elif [ ! -d "$1/$2" ]; then
-  echo "folder $1/$2 does not exist"
-  exit 1
-fi
-
-echo running post-installation script for $1/$2 jail...
-
-# copia de arquivos
-cp -p /etc/passwd $1/$2/etc/
-cp -p /etc/group $1/$2/etc/
-cp /etc/localtime $1/$2/etc/
-
-# pos-instalacao
-mount -t proc proc $1/$2/proc
-chroot $1/$2 /sbin/ldconfig
-cd $1/$2 && exec ./var/log/scripts/glibc-zoneinfo-*
-umount $1/$2/proc
diff --git a/templates/openoffice/openoffice.template b/templates/openoffice/openoffice.template
deleted file mode 100644
index ef3ae52..0000000
--- a/templates/openoffice/openoffice.template
+++ /dev/null
@@ -1,60 +0,0 @@
-aaa_base: ADD
-aaa_elflibs: ADD
-acpid: REC
-bash: ADD
-bin: ADD
-bzip2: ADD
-coreutils: ADD
-cups: REC
-cxxlibs: ADD
-devs: ADD
-etc: ADD
-a2ps
-bc
-enscript
-espgs
-etc
-findutils
-gawk
-gettext
-getty-ps
-gimp-print
-glibc
-glibc-i18n
-glibc-profile
-glibc-solibs
-glibc-zoneinfo
-grep
-gzip
-hpijs
-infozip
-ispell
-kbd
-kde-i18n-pt_BR
-kdebase
-kdelibs
-koffice-i18n-pt_BR
-less
-libart_lgpl
-libidn
-libmng
-pkgtools
-qt
-sed
-shadow
-sudo
-sysklogd
-sysvinit
-utempter
-util-linux
-x11
-x11-devel
-x11-fonts-100dpi
-x11-fonts-cyrillic
-x11-fonts-misc
-x11-fonts-scale
-x11-xdmx
-x11-xnest
-x11-xvfb
-openoffice-chroot
-openssl
diff --git a/templates/slackware/slackware.template b/templates/slackware/slackware.template
deleted file mode 100644
index c3590c1..0000000
--- a/templates/slackware/slackware.template
+++ /dev/null
@@ -1,566 +0,0 @@
-# This is a Slackware Installation Tagfile.
-# 
-# This one comes from disk: A1 (Base Linux series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-aaa_base: ADD
-aaa_elflibs: ADD
-acpid: REC
-apmd: REC
-bash: ADD
-bin: ADD
-bzip2: ADD
-coreutils: ADD
-cpio: ADD
-cups: REC
-cxxlibs: ADD
-dcron: ADD
-devs: ADD
-e2fsprogs: ADD
-elvis: ADD
-etc: ADD
-findutils: ADD
-floppy: ADD
-gawk: ADD
-genpower: OPT
-gettext: REC
-getty-ps: OPT
-glibc-solibs: ADD
-glibc-zoneinfo: ADD
-gpm: REC
-grep: ADD
-gzip: ADD
-hdparm: ADD
-hotplug: ADD
-infozip: ADD
-isapnptools: OPT
-jfsutils: OPT
-kbd: REC
-kernel-ide: REC
-kernel-modules: ADD
-less: ADD
-lilo: ADD
-loadlin: REC
-logrotate: ADD
-minicom: REC
-mkinitrd: REC
-module-init-tools: ADD
-openssl-solibs: ADD
-pciutils: OPT
-pcmcia-cs: REC
-pkgtools: ADD
-procps: ADD
-reiserfsprogs: ADD
-sed: ADD
-shadow: ADD
-slocate: ADD
-smartmontools: ADD
-sysklogd: ADD
-syslinux: ADD
-sysvinit: ADD
-tar: ADD
-tcsh: REC
-udev: ADD
-umsdos-progs: ADD
-usbutils: ADD
-utempter: REC
-util-linux: ADD
-xfsprogs: OPT
-# This is a Slackware Installation Tagfile.
-#           
-# This one comes from disk: AP1 (Applications series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-a2ps: REC
-acct: OPT
-alsa-utils: REC
-amp: OPT
-ash: OPT
-at: OPT
-aumix: OPT
-bc: OPT
-bpe: OPT
-cdparanoia: OPT
-cdrdao: OPT
-cdrtools: OPT
-diffutils: REC
-dvd+rw-tools: OPT
-enscript: OPT
-espgs: REC
-flac: OPT
-gimp-print: OPT
-groff: ADD
-gnu-gs-fonts: REC
-hpijs: REC
-ispell: OPT
-jed: OPT
-joe: OPT
-jove: OPT
-ksh93: OPT
-lsof: OPT
-lvm: OPT
-madplay: OPT
-man: ADD
-man-pages: REC
-mc: OPT
-mdadm: OPT
-most: OPT
-mpg321: OPT
-mt-st: OPT
-mysql: OPT
-normalize: OPT
-quota: OPT
-raidtools: OPT
-rexima: REC
-rpm: OPT
-rzip: OPT
-sc: OPT
-screen: OPT
-seejpeg: REC
-sgml-tools: REC
-sox: REC
-sudo: OPT
-texinfo: REC
-vim: OPT
-vorbis-tools: OPT
-workbone: OPT
-zsh: OPT
-
-autoconf: OPT
-automake: OPT
-bin86: ADD
-binutils: ADD
-bison: ADD
-byacc: OPT
-ccache: OPT
-clisp: OPT
-cscope: OPT
-cvs: REC
-distcc: OPT
-doxygen: OPT
-flex: ADD
-gcc: ADD
-gcc-g++: REC
-gcc-g77: OPT
-gcc-gnat: OPT
-gcc-java: OPT
-gcc-objc: OPT
-gdb: REC
-gettext-tools: REC
-guile: OPT
-indent: OPT
-kernel-headers: ADD
-libtool: OPT
-m4: REC
-make: ADD
-nasm: OPT
-oprofile: OPT
-p2c: OPT
-perl: REC
-pkgconfig: REC
-pmake: REC
-python: OPT
-python-demo: OPT
-python-tools: OPT
-rcs: OPT
-strace: REC
-subversion: OPT
-# Tagfile for emacs series
-emacs: ADD
-emacs-misc: REC
-emacs-lisp: OPT
-emacs-leim: OPT
-emacs-nox: OPT
-emacs-info: REC
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: F1 (Frequently Asked Questions)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-linux-faqs: ADD
-linux-howtos: ADD
-kernel-source: REC
-aalib: REC
-alsa-driver: ADD
-alsa-lib: ADD
-alsa-oss: OPT
-arts: ADD
-aspell: REC
-aspell-en: REC
-atk: REC
-audiofile: REC
-db3: REC
-db31: REC
-db4: REC
-esound: REC
-expat: REC
-fribidi: REC
-gdbm: REC
-gdk-pixbuf: REC
-glib: REC
-glib2: REC
-glibc: REC
-glibc-i18n: OPT
-glibc-profile: OPT
-glut: REC
-gmp: REC
-gnet: REC
-gtk+: REC
-gtk+2: REC
-imlib: REC
-jre: OPT
-lcms: REC
-lesstif: REC
-libao: REC
-libart_lgpl: REC
-libcaca: OPT
-libexif: REC
-libglade: REC
-libgsf: REC
-libgtkhtml: REC
-libid3tag: REC
-libidl: REC
-libidn: REC
-libieee1284: REC
-libjpeg: REC
-libmad: REC
-libmikmod: REC
-libmng: REC
-libogg: REC
-libpng: REC
-librsvg: REC
-libtermcap: REC
-libtiff: REC
-libungif: REC
-libusb: REC
-libvorbis: REC
-libwmf: REC
-libwmf-docs: OPT
-libwpd: REC
-libxml2: REC
-libxslt: REC
-mhash: REC
-mpeg_lib: OPT
-ncurses: REC
-netpbm: REC
-pango: REC
-pcre: REC
-pilot-link: REC
-popt: REC
-readline: REC
-sdl: REC
-shared-mime-info: REC
-slang: REC
-startup-notification: ADD
-svgalib: REC
-t1lib: REC
-taglib: REC
-wv2: REC
-xaw3d: REC
-zlib: REC
-# This is a Slackware Installation Tagfile.
-#           
-# This one comes from the N (Network/UUCP/Mail/News) series.
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-# 
-#
-apache: OPT
-autofs: OPT
-bind: REC
-bitchx: OPT
-bootp: OPT
-curl: OPT
-cyrus-sasl: REC
-dhcp: OPT
-dhcpcd: REC
-dnsmasq: OPT
-elm: OPT
-epic4: OPT
-fetchmail: OPT
-getmail: REC
-gnupg: OPT
-htdig: OPT
-imapd: OPT
-inetd: REC
-iproute2: OPT
-iptables: ADD
-iptraf: OPT
-irssi: OPT
-lftp: OPT
-links: OPT
-lynx: OPT
-metamail: REC
-mod_ssl: OPT
-mutt: OPT
-nail: REC
-nc: OPT
-ncftp: OPT
-netatalk: OPT
-netpipes: OPT
-netwatch: OPT
-newspost: OPT
-nfs-utils: OPT
-nmap: OPT
-nn: OPT
-ntp: OPT
-openssh: REC
-openssl: REC
-php: OPT
-pidentd: REC
-pine: OPT
-popa3d: REC
-portmap: REC
-ppp: OPT
-procmail: REC
-proftpd: OPT
-rdist: OPT
-rp-pppoe: OPT
-rsync: OPT
-samba: OPT
-sendmail-cf: OPT
-sendmail: REC
-slrn: OPT
-stunnel: OPT
-tcpdump: REC
-tcpip: REC
-tin: OPT
-traceroute: OPT
-trn: OPT
-uucp: OPT
-vsftpd: REC
-wget: OPT
-whois: OPT
-wireless-tools: OPT
-yptools: OPT
-ytalk: OPT
-tetex: ADD
-tetex-doc: REC
-xfig: OPT
-transfig: OPT
-# This is a Slackware Installation Tagfile.
-#           
-# This one comes from disk: TCL1 (Tcl/Tk series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-expect: OPT
-hfsutils: OPT
-tcl:  ADD
-tk:   REC
-tclx: REC
-tix: OPT
-x11: ADD
-x11-devel: ADD
-x11-docs: REC
-x11-docs-html: OPT
-x11-fonts-100dpi: OPT
-x11-fonts-cyrillic: OPT
-x11-fonts-misc: ADD
-x11-fonts-scale: ADD
-x11-xdmx: OPT
-x11-xnest: OPT
-x11-xvfb: OPT
-abiword: OPT
-blackbox: OPT
-fluxbox: OPT
-fvwm: REC
-gaim: OPT
-gftp: OPT
-gimp: REC
-gimp-help-2: REC
-gkrellm: OPT
-gnuchess: REC
-gnuplot: OPT
-gucharmap: OPT
-gv: REC
-gxine: OPT
-imagemagick: REC
-mozilla: REC
-mozilla-firefox: REC
-mozilla-thunderbird: REC
-pan: REC
-rxvt: REC
-sane: OPT
-seyon: OPT
-windowmaker: REC
-x3270: OPT
-xchat: OPT
-xfce: OPT
-xfm: OPT
-xfractint: OPT
-xgames: REC
-xine-lib: REC
-xine-ui: REC
-xpaint: OPT
-xpdf: OPT
-xmms: OPT
-xsane: OPT
-xlockmore: REC
-xscreensaver: REC
-xv: REC
-xvim: REC
-xxgdb: REC
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: Y1 (Yaaaaaahhoooo? Games and Amusements).
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-bsd-games: OPT
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/apache/httpd.conf b/templates/vserver-legacy/vserver-legacy.d/etc/apache/httpd.conf
deleted file mode 100644
index 7b7115d..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/apache/httpd.conf
+++ /dev/null
@@ -1,1046 +0,0 @@
-##
-## httpd.conf -- Apache HTTP server configuration file
-##
-
-#
-# Based upon the NCSA server configuration files originally by Rob McCool.
-#
-# This is the main Apache server configuration file.  It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs/> for detailed information about
-# the directives.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do.  They're here only as hints or reminders.  If you are unsure
-# consult the online docs. You have been warned.  
-#
-# After this file is processed, the server will look for and process
-# /etc/apache/srm.conf and then /etc/apache/access.conf
-# unless you have overridden these with ResourceConfig and/or
-# AccessConfig directives here.
-#
-# The configuration directives are grouped into three basic sections:
-#  1. Directives that control the operation of the Apache server process as a
-#     whole (the 'global environment').
-#  2. Directives that define the parameters of the 'main' or 'default' server,
-#     which responds to requests that aren't handled by a virtual host.
-#     These directives also provide default values for the settings
-#     of all virtual hosts.
-#  3. Settings for virtual hosts, which allow Web requests to be sent to
-#     different IP addresses or hostnames and have them handled by the
-#     same Apache server process.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path.  If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
-# with ServerRoot set to "/usr/local/apache" will be interpreted by the
-# server as "/usr/local/apache/logs/foo.log".
-#
-
-### Section 1: Global Environment
-#
-# The directives in this section affect the overall operation of Apache,
-# such as the number of concurrent requests it can handle or where it
-# can find its configuration files.
-#
-
-#
-# ServerType is either inetd, or standalone.  Inetd mode is only supported on
-# Unix platforms.
-#
-ServerType standalone
-
-# ServerTokens directive
-ServerTokens ProductOnly
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# NOTE!  If you intend to place this on an NFS (or otherwise network)
-# mounted filesystem then please read the LockFile documentation
-# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
-# you will save yourself a lot of trouble.
-#
-ServerRoot "/usr"
-
-#
-# The LockFile directive sets the path to the lockfile used when Apache
-# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
-# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
-# its default value. The main reason for changing it is if the logs
-# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
-# DISK. The PID of the main server process is automatically appended to
-# the filename. 
-#
-#LockFile /var/run/httpd.lock
-
-#
-# PidFile: The file in which the server should record its process
-# identification number when it starts.
-#
-PidFile /var/run/httpd.pid
-
-#
-# ScoreBoardFile: File used to store internal server process information.
-# Not all architectures require this.  But if yours does (you'll know because
-# this file will be  created when you run Apache) then you *must* ensure that
-# no two invocations of Apache share the same scoreboard file.
-#
-ScoreBoardFile /var/run/httpd.scoreboard
-
-#
-# In the standard configuration, the server will process httpd.conf (this 
-# file, specified by the -f command line option), srm.conf, and access.conf 
-# in that order.  The latter two files are now distributed empty, as it is 
-# recommended that all directives be kept in a single file for simplicity.  
-# The commented-out values below are the built-in defaults.  You can have the 
-# server ignore these files altogether by using "/dev/null" (for Unix) or
-# "nul" (for Win32) for the arguments to the directives.
-#
-#ResourceConfig /etc/apache/srm.conf
-#AccessConfig /etc/apache/access.conf
-
-#
-# Timeout: The number of seconds before receives and sends time out.
-#
-Timeout 300
-
-#
-# KeepAlive: Whether or not to allow persistent connections (more than
-# one request per connection). Set to "Off" to deactivate.
-#
-KeepAlive On
-
-#
-# MaxKeepAliveRequests: The maximum number of requests to allow
-# during a persistent connection. Set to 0 to allow an unlimited amount.
-# We recommend you leave this number high, for maximum performance.
-#
-MaxKeepAliveRequests 100
-
-#
-# KeepAliveTimeout: Number of seconds to wait for the next request from the
-# same client on the same connection.
-#
-KeepAliveTimeout 2
-
-#
-# Server-pool size regulation.  Rather than making you guess how many
-# server processes you need, Apache dynamically adapts to the load it
-# sees --- that is, it tries to maintain enough server processes to
-# handle the current load, plus a few spare servers to handle transient
-# load spikes (e.g., multiple simultaneous requests from a single
-# Netscape browser).
-#
-# It does this by periodically checking how many servers are waiting
-# for a request.  If there are fewer than MinSpareServers, it creates
-# a new spare.  If there are more than MaxSpareServers, some of the
-# spares die off.  The default values are probably OK for most sites.
-#
-MinSpareServers 5
-MaxSpareServers 10
-
-#
-# Number of servers to start initially --- should be a reasonable ballpark
-# figure.
-#
-StartServers 5
-
-#
-# Limit on total number of servers running, i.e., limit on the number
-# of clients who can simultaneously connect --- if this limit is ever
-# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
-# It is intended mainly as a brake to keep a runaway server from taking
-# the system with it as it spirals down...
-#
-MaxClients 150
-
-#
-# MaxRequestsPerChild: the number of requests each child process is
-# allowed to process before the child dies.  The child will exit so
-# as to avoid problems after prolonged use when Apache (and maybe the
-# libraries it uses) leak memory or other resources.  On most systems, this
-# isn't really needed, but a few (such as Solaris) do have notable leaks
-# in the libraries. For these platforms, set to something like 10000
-# or so; a setting of 0 means unlimited.
-#
-# NOTE: This value does not include keepalive requests after the initial
-#       request per connection. For example, if a child process handles
-#       an initial request and 10 subsequent "keptalive" requests, it
-#       would only count as 1 request towards this limit.
-#
-MaxRequestsPerChild 0
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, instead of the default. See also the <VirtualHost>
-# directive.
-#
-#Listen 3000
-#Listen 12.34.56.78:80
-
-#
-# BindAddress: You can support virtual hosts with this option. This directive
-# is used to tell the server which IP address to listen to. It can either
-# contain "*", an IP address, or a fully qualified Internet domain name.
-# See also the <VirtualHost> and Listen directives.
-#
-#BindAddress *
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Please read the file http://httpd.apache.org/docs/dso.html for more
-# details about the DSO mechanism and run `httpd -l' for the list of already
-# built-in (statically linked and thus always available) modules in your httpd
-# binary.
-#
-# Note: The order in which modules are loaded is important.  Don't change
-# the order below without expert advice.
-#
-# Example:
-# LoadModule foo_module libexec/mod_foo.so
-LoadModule vhost_alias_module libexec/apache/mod_vhost_alias.so
-#LoadModule env_module         libexec/apache/mod_env.so
-LoadModule define_module      libexec/apache/mod_define.so
-LoadModule config_log_module  libexec/apache/mod_log_config.so
-LoadModule mime_magic_module  libexec/apache/mod_mime_magic.so
-LoadModule mime_module        libexec/apache/mod_mime.so
-LoadModule negotiation_module libexec/apache/mod_negotiation.so
-#LoadModule status_module      libexec/apache/mod_status.so
-#LoadModule info_module        libexec/apache/mod_info.so
-LoadModule includes_module    libexec/apache/mod_include.so
-LoadModule autoindex_module   libexec/apache/mod_autoindex.so
-LoadModule dir_module         libexec/apache/mod_dir.so
-LoadModule cgi_module         libexec/apache/mod_cgi.so
-#LoadModule asis_module        libexec/apache/mod_asis.so
-#LoadModule imap_module        libexec/apache/mod_imap.so
-#LoadModule action_module      libexec/apache/mod_actions.so
-#LoadModule speling_module     libexec/apache/mod_speling.so
-#LoadModule userdir_module     libexec/apache/mod_userdir.so
-LoadModule alias_module       libexec/apache/mod_alias.so
-LoadModule rewrite_module     libexec/apache/mod_rewrite.so
-LoadModule access_module      libexec/apache/mod_access.so
-LoadModule auth_module        libexec/apache/mod_auth.so
-LoadModule anon_auth_module   libexec/apache/mod_auth_anon.so
-#LoadModule dbm_auth_module    libexec/apache/mod_auth_dbm.so
-#LoadModule digest_module      libexec/apache/mod_digest.so
-LoadModule proxy_module       libexec/apache/libproxy.so
-LoadModule cern_meta_module   libexec/apache/mod_cern_meta.so
-LoadModule expires_module     libexec/apache/mod_expires.so
-LoadModule headers_module     libexec/apache/mod_headers.so
-#LoadModule usertrack_module   libexec/apache/mod_usertrack.so
-#LoadModule log_forensic_module libexec/apache/mod_log_forensic.so
-#LoadModule unique_id_module   libexec/apache/mod_unique_id.so
-LoadModule setenvif_module    libexec/apache/mod_setenvif.so
-
-#  Reconstruction of the complete module list from all available modules
-#  (static and shared ones) to achieve correct module execution order.
-#  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
-ClearModuleList
-AddModule mod_vhost_alias.c
-#AddModule mod_env.c
-AddModule mod_define.c
-AddModule mod_log_config.c
-AddModule mod_mime_magic.c
-AddModule mod_mime.c
-AddModule mod_negotiation.c
-#AddModule mod_status.c
-#AddModule mod_info.c
-AddModule mod_include.c
-AddModule mod_autoindex.c
-AddModule mod_dir.c
-AddModule mod_cgi.c
-#AddModule mod_asis.c
-#AddModule mod_imap.c
-#AddModule mod_actions.c
-#AddModule mod_speling.c
-#AddModule mod_userdir.c
-AddModule mod_alias.c
-AddModule mod_rewrite.c
-AddModule mod_access.c
-AddModule mod_auth.c
-AddModule mod_auth_anon.c
-#AddModule mod_auth_dbm.c
-#AddModule mod_digest.c
-AddModule mod_proxy.c
-AddModule mod_cern_meta.c
-AddModule mod_expires.c
-AddModule mod_headers.c
-#AddModule mod_usertrack.c
-#AddModule mod_log_forensic.c
-#AddModule mod_unique_id.c
-AddModule mod_so.c
-AddModule mod_setenvif.c
-
-#
-# ExtendedStatus controls whether Apache will generate "full" status
-# information (ExtendedStatus On) or just basic information (ExtendedStatus
-# Off) when the "server-status" handler is called. The default is Off.
-#
-#ExtendedStatus On
-
-### Section 2: 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition.  These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-#
-# If your ServerType directive (set earlier in the 'Global Environment'
-# section) is set to "inetd", the next few directives don't have any
-# effect since their settings are defined by the inetd configuration.
-# Skip ahead to the ServerAdmin directive.
-#
-
-#
-# Port: The port to which the standalone server listens. For
-# ports < 1023, you will need httpd to be run as root initially.
-#
-Port 80
-
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.  
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
-#  . On HPUX you may not be able to use shared memory as nobody, and the
-#    suggested workaround is to create a user www and use that user.
-#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
-#  when the value of (unsigned)Group is above 60000; 
-#  don't use Group "#-1" on these systems!
-#
-User nobody
-Group nobody
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed.  This address appears on some server-generated pages, such
-# as error documents.
-#
-ServerAdmin root@midas.slackware.lan
-
-#
-# ServerName allows you to set a host name which is sent back to clients for
-# your server if it's different than the one the program would get (i.e., use
-# "www" instead of the host's real name).
-#
-# Note: You cannot just invent host names and hope they work. The name you 
-# define here must be a valid DNS name for your host. If you don't understand
-# this, ask your network administrator.
-# If your host doesn't have a registered DNS name, enter its IP address here.
-# You will have to access it by its address (e.g., http://123.45.67.89/)
-# anyway, and this will make redirections work in a sensible way.
-#
-# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your 
-# machine always knows itself by this address. If you use Apache strictly for 
-# local testing and development, you may use 127.0.0.1 as the server name.
-#
-#ServerName www.example.com
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/var/www/htdocs"
-
-#
-# Each directory to which Apache has access, can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories). 
-#
-# First, we configure the "default" to be a very restrictive set of 
-# permissions.  
-#
-<Directory />
-    Options FollowSymLinks
-    AllowOverride None
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory "/var/www/htdocs">
-
-#
-# This may also be "None", "All", or any combination of "Indexes",
-# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
-#
-# Note that "MultiViews" must be named *explicitly* --- "Options All"
-# doesn't give it to you.
-#
-    Options Indexes FollowSymLinks MultiViews
-
-#
-# This controls which options the .htaccess files in directories can
-# override. Can also be "All", or any combination of "Options", "FileInfo", 
-# "AuthConfig", and "Limit"
-#
-    AllowOverride None
-
-#
-# Controls who can get stuff from this server.
-#
-    Order allow,deny
-    Allow from all
-</Directory>
-
-#
-# UserDir: The name of the directory which is appended onto a user's home
-# directory if a ~user request is received.
-#
-<IfModule mod_userdir.c>
-    UserDir public_html
-</IfModule>
-
-#
-# Control access to UserDir directories.  The following is an example
-# for a site where these directories are restricted to read-only.
-#
-#<Directory /home/*/public_html>
-#    AllowOverride FileInfo AuthConfig Limit
-#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
-#    <Limit GET POST OPTIONS PROPFIND>
-#        Order allow,deny
-#        Allow from all
-#    </Limit>
-#    <LimitExcept GET POST OPTIONS PROPFIND>
-#        Order deny,allow
-#        Deny from all
-#    </LimitExcept>
-#</Directory>
-
-#
-# DirectoryIndex: Name of the file or files to use as a pre-written HTML
-# directory index.  Separate multiple entries with spaces.
-#
-<IfModule mod_dir.c>
-    DirectoryIndex index.html
-</IfModule>
-
-#
-# AccessFileName: The name of the file to look for in each directory
-# for access control information.
-#
-AccessFileName .htaccess
-
-#
-# The following lines prevent .htaccess files from being viewed by
-# Web clients.  Since .htaccess files often contain authorization
-# information, access is disallowed for security reasons.  Comment
-# these lines out if you want Web visitors to see the contents of
-# .htaccess files.  If you change the AccessFileName directive above,
-# be sure to make the corresponding changes here.
-#
-# Also, folks tend to use names such as .htpasswd for password
-# files, so this will protect those as well.
-#
-<Files ~ "^\.ht">
-    Order allow,deny
-    Deny from all
-    Satisfy All
-</Files>
-
-#
-# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
-# document that was negotiated on the basis of content. This asks proxy
-# servers not to cache the document. Uncommenting the following line disables
-# this behavior, and proxies will be allowed to cache the documents.
-#
-#CacheNegotiatedDocs
-
-#
-# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
-# Apache needs to construct a self-referencing URL (a URL that refers back
-# to the server the response is coming from) it will use ServerName and
-# Port to form a "canonical" name.  With this setting off, Apache will
-# use the hostname:port that the client supplied, when possible.  This
-# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
-#
-UseCanonicalName On
-
-#
-# TypesConfig describes where the mime.types file (or equivalent) is
-# to be found.
-#
-<IfModule mod_mime.c>
-    TypesConfig /etc/apache/mime.types
-</IfModule>
-
-#
-# DefaultType is the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value.  If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
-DefaultType text/plain
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type.  The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-# mod_mime_magic is not part of the default server (you have to add
-# it yourself with a LoadModule [see the DSO paragraph in the 'Global
-# Environment' section], or recompile the server and include mod_mime_magic
-# as part of the configuration), so it's enclosed in an <IfModule> container.
-# This means that the MIMEMagicFile directive will only be processed if the
-# module is part of the server.
-#
-<IfModule mod_mime_magic.c>
-    MIMEMagicFile /etc/apache/magic
-</IfModule>
-
-#
-# HostnameLookups: Log the names of clients or just their IP addresses
-# e.g., www.apache.org (on) or 204.62.129.132 (off).
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on, since enabling it means that
-# each client request will result in AT LEAST one lookup request to the
-# nameserver.
-#
-HostnameLookups Off
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here.  If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog "| /usr/bin/error-log.sh /var/log/apache/error_log"
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-#
-# The following directives define some format nicknames for use with
-# a CustomLog directive (see below).
-#
-LogFormat "%l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
-LogFormat "%l %u %t \"%r\" %>s %b" common
-LogFormat "%{Referer}i -> %U" referer
-LogFormat "%{User-agent}i" agent
-
-#
-# The location and format of the access logfile (Common Logfile Format).
-# If you do not define any access logfiles within a <VirtualHost>
-# container, they will be logged here.  Contrariwise, if you *do*
-# define per-<VirtualHost> access logfiles, transactions will be
-# logged therein and *not* in this file.
-#
-CustomLog /var/log/apache/access_log common
-
-#
-# If you would like to have agent and referer logfiles, uncomment the
-# following directives.
-#
-#CustomLog /var/log/apache/referer_log referer
-#CustomLog /var/log/apache/agent_log agent
-
-#
-# If you prefer a single logfile with access, agent, and referer information
-# (Combined Logfile Format) you can use the following directive.
-#
-#CustomLog /var/log/apache/access_log combined
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (error documents, FTP directory listings,
-# mod_status and mod_info output etc., but not CGI generated documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#
-ServerSignature Off
-
-# EBCDIC configuration:
-# (only for mainframes using the EBCDIC codeset, currently one of:
-# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
-# The following default configuration assumes that "text files"
-# are stored in EBCDIC (so that you can operate on them using the
-# normal POSIX tools like grep and sort) while "binary files" are
-# stored with identical octets as on an ASCII machine.
-#
-# The directives are evaluated in configuration file order, with
-# the EBCDICConvert directives applied before EBCDICConvertByType.
-#
-# If you want to have ASCII HTML documents and EBCDIC HTML documents
-# at the same time, you can use the file extension to force
-# conversion off for the ASCII documents:
-# > AddType       text/html .ahtml
-# > EBCDICConvert Off=InOut .ahtml
-#
-# EBCDICConvertByType  On=InOut text/* message/* multipart/*
-# EBCDICConvertByType  On=In    application/x-www-form-urlencoded
-# EBCDICConvertByType  On=InOut application/postscript model/vrml
-# EBCDICConvertByType Off=InOut */*
-
-
-#
-# Aliases: Add here as many aliases as you need (with no limit). The format is 
-# Alias fakename realname
-#
-<IfModule mod_alias.c>
-
-    #
-    # Note that if you include a trailing / on fakename then the server will
-    # require it to be present in the URL.  So "/icons" isn't aliased in this
-    # example, only "/icons/".  If the fakename is slash-terminated, then the 
-    # realname must also be slash terminated, and if the fakename omits the 
-    # trailing slash, the realname must also omit it.
-    #
-    Alias /icons/ "/var/www/icons/"
-
-    <Directory "/var/www/icons">
-        Options Indexes MultiViews
-        AllowOverride None
-        Order allow,deny
-        Allow from all
-    </Directory>
-
-    # This Alias will project the on-line documentation tree under /manual/
-    # even if you change the DocumentRoot. Comment it if you don't want to 
-    # provide access to the on-line documentation.
-    #
-    Alias /manual/ "/var/www/htdocs/manual/"
-
-    <Directory "/var/www/htdocs/manual">
-        Options Indexes FollowSymlinks MultiViews
-        AllowOverride None
-        Order allow,deny
-        Allow from all
-    </Directory>
-
-    #
-    # ScriptAlias: This controls which directories contain server scripts.
-    # ScriptAliases are essentially the same as Aliases, except that
-    # documents in the realname directory are treated as applications and
-    # run by the server when requested rather than as documents sent to the client.
-    # The same rules about trailing "/" apply to ScriptAlias directives as to
-    # Alias.
-    #
-    ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
-
-    #
-    # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
-    # CGI directory exists, if you have that configured.
-    #
-    <Directory "/var/www/cgi-bin">
-        AllowOverride None
-        Options None
-        Order allow,deny
-        Allow from all
-    </Directory>
-
-</IfModule>
-# End of aliases.
-
-#
-# Redirect allows you to tell clients about documents which used to exist in
-# your server's namespace, but do not anymore. This allows you to tell the
-# clients where to look for the relocated document.
-# Format: Redirect old-URI new-URL
-#
-
-#
-# Directives controlling the display of server-generated directory listings.
-#
-<IfModule mod_autoindex.c>
-
-    #
-    # FancyIndexing is whether you want fancy directory indexing or standard
-    #
-    IndexOptions FancyIndexing
-
-    #
-    # AddIcon* directives tell the server which icon to show for different
-    # files or filename extensions.  These are only displayed for
-    # FancyIndexed directories.
-    #
-    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
-
-    AddIconByType (TXT,/icons/text.gif) text/*
-    AddIconByType (IMG,/icons/image2.gif) image/*
-    AddIconByType (SND,/icons/sound2.gif) audio/*
-    AddIconByType (VID,/icons/movie.gif) video/*
-
-    AddIcon /icons/binary.gif .bin .exe
-    AddIcon /icons/binhex.gif .hqx
-    AddIcon /icons/tar.gif .tar
-    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
-    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
-    AddIcon /icons/a.gif .ps .ai .eps
-    AddIcon /icons/layout.gif .html .shtml .htm .pdf
-    AddIcon /icons/text.gif .txt
-    AddIcon /icons/c.gif .c
-    AddIcon /icons/p.gif .pl .py
-    AddIcon /icons/f.gif .for
-    AddIcon /icons/dvi.gif .dvi
-    AddIcon /icons/uuencoded.gif .uu
-    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
-    AddIcon /icons/tex.gif .tex
-    AddIcon /icons/bomb.gif core
-
-    AddIcon /icons/back.gif ..
-    AddIcon /icons/hand.right.gif README
-    AddIcon /icons/folder.gif ^^DIRECTORY^^
-    AddIcon /icons/blank.gif ^^BLANKICON^^
-
-    #
-    # DefaultIcon is which icon to show for files which do not have an icon
-    # explicitly set.
-    #
-    DefaultIcon /icons/unknown.gif
-
-    #
-    # AddDescription allows you to place a short description after a file in
-    # server-generated indexes.  These are only displayed for FancyIndexed
-    # directories.
-    # Format: AddDescription "description" filename
-    #
-    #AddDescription "GZIP compressed document" .gz
-    #AddDescription "tar archive" .tar
-    #AddDescription "GZIP compressed tar archive" .tgz
-
-    #
-    # ReadmeName is the name of the README file the server will look for by
-    # default, and append to directory listings.
-    #
-    # HeaderName is the name of a file which should be prepended to
-    # directory indexes. 
-    #
-    ReadmeName README.html
-    HeaderName HEADER.html
-
-    #
-    # IndexIgnore is a set of filenames which directory indexing should ignore
-    # and not include in the listing.  Shell-style wildcarding is permitted.
-    #
-    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
-
-</IfModule>
-# End of indexing directives.
-
-#
-# Document types.
-#
-<IfModule mod_mime.c>
-
-    #
-    # AddLanguage allows you to specify the language of a document. You can
-    # then use content negotiation to give a browser a file in a language
-    # it can understand.  
-    #
-    # Note 1: The suffix does not have to be the same as the language 
-    # keyword --- those with documents in Polish (whose net-standard 
-    # language code is pl) may wish to use "AddLanguage pl .po" to 
-    # avoid the ambiguity with the common suffix for perl scripts.
-    #
-    # Note 2: The example entries below illustrate that in quite
-    # some cases the two character 'Language' abbreviation is not
-    # identical to the two character 'Country' code for its country,
-    # E.g. 'Danmark/dk' versus 'Danish/da'.
-    #
-    # Note 3: In the case of 'ltz' we violate the RFC by using a three char 
-    # specifier. But there is 'work in progress' to fix this and get 
-    # the reference data for rfc1766 cleaned up.
-    #
-    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
-    # French (fr) - German (de) - Greek-Modern (el)
-    # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
-    # Portugese (pt) - Luxembourgeois* (ltz)
-    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
-    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
-    # Russian (ru)
-    #
-    AddLanguage da .dk
-    AddLanguage nl .nl
-    AddLanguage en .en
-    AddLanguage et .ee
-    AddLanguage fr .fr
-    AddLanguage de .de
-    AddLanguage el .el
-    AddLanguage he .he
-    AddCharset ISO-8859-8 .iso8859-8
-    AddLanguage it .it
-    AddLanguage ja .ja
-    AddCharset ISO-2022-JP .jis
-    AddLanguage kr .kr
-    AddCharset ISO-2022-KR .iso-kr
-    AddLanguage nn .nn
-    AddLanguage no .no
-    AddLanguage pl .po
-    AddCharset ISO-8859-2 .iso-pl
-    AddLanguage pt .pt
-    AddLanguage pt-br .pt-br
-    AddLanguage ltz .lu
-    AddLanguage ca .ca
-    AddLanguage es .es
-    AddLanguage sv .sv
-    AddLanguage cs .cz .cs
-    AddLanguage ru .ru
-    AddLanguage zh-TW .zh-tw
-    AddCharset Big5         .Big5    .big5
-    AddCharset WINDOWS-1251 .cp-1251
-    AddCharset CP866        .cp866
-    AddCharset ISO-8859-5   .iso-ru
-    AddCharset KOI8-R       .koi8-r
-    AddCharset UCS-2        .ucs2
-    AddCharset UCS-4        .ucs4
-    AddCharset UTF-8        .utf8
-
-    # LanguagePriority allows you to give precedence to some languages
-    # in case of a tie during content negotiation.
-    #
-    # Just list the languages in decreasing order of preference. We have
-    # more or less alphabetized them here. You probably want to change this.
-    #
-    <IfModule mod_negotiation.c>
-        LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
-    </IfModule>
-
-    #
-    # AddType allows you to tweak mime.types without actually editing it, or to
-    # make certain files to be certain types.
-    #
-    AddType application/x-tar .tgz
-
-    #
-    # AddEncoding allows you to have certain browsers uncompress
-    # information on the fly. Note: Not all browsers support this.
-    # Despite the name similarity, the following Add* directives have nothing
-    # to do with the FancyIndexing customization directives above.
-    #
-    AddEncoding x-compress .Z
-    AddEncoding x-gzip .gz .tgz
-    #
-    # If the AddEncoding directives above are commented-out, then you
-    # probably should define those extensions to indicate media types:
-    #
-    #AddType application/x-compress .Z
-    #AddType application/x-gzip .gz .tgz
-
-    #
-    # AddHandler allows you to map certain file extensions to "handlers",
-    # actions unrelated to filetype. These can be either built into the server
-    # or added with the Action command (see below)
-    #
-    # If you want to use server side includes, or CGI outside
-    # ScriptAliased directories, uncomment the following lines.
-    #
-    # To use CGI scripts:
-    #
-    #AddHandler cgi-script .cgi
-
-    #
-    # To use server-parsed HTML files
-    #
-    #AddType text/html .shtml
-    #AddHandler server-parsed .shtml
-
-    #
-    # Uncomment the following line to enable Apache's send-asis HTTP file
-    # feature
-    #
-    #AddHandler send-as-is asis
-
-    #
-    # If you wish to use server-parsed imagemap files, use
-    #
-    #AddHandler imap-file map
-
-    #
-    # To enable type maps, you might want to use
-    #
-    #AddHandler type-map var
-
-</IfModule>
-# End of document types.
-
-#
-# Action lets you define media types that will execute a script whenever
-# a matching file is called. This eliminates the need for repeated URL
-# pathnames for oft-used CGI file processors.
-# Format: Action media/type /cgi-script/location
-# Format: Action handler-name /cgi-script/location
-#
-
-#
-# MetaDir: specifies the name of the directory in which Apache can find
-# meta information files. These files contain additional HTTP headers
-# to include when sending the document
-#
-#MetaDir .web
-
-#
-# MetaSuffix: specifies the file name suffix for the file containing the
-# meta information.
-#
-#MetaSuffix .meta
-
-#
-# Customizable error response (Apache style)
-#  these come in three flavors
-#
-#    1) plain text
-ErrorDocument 500 /missing.html
-#  n.b.  the single leading (") marks it as text, it does not get output
-#
-#    2) local redirects
-ErrorDocument 404 /missing.html
-#  to redirect to local URL /missing.html
-#ErrorDocument 404 /cgi-bin/missing_handler.pl
-#  N.B.: You can redirect to a script or a document using server-side-includes.
-#
-#    3) external redirects
-ErrorDocument 402 /missing.html
-#  N.B.: Many of the environment variables associated with the original
-#  request will *not* be available to such a script.
-
-#
-# Customize behaviour based on the browser
-#
-<IfModule mod_setenvif.c>
-
-    #
-    # The following directives modify normal HTTP response behavior.
-    # The first directive disables keepalive for Netscape 2.x and browsers that
-    # spoof it. There are known problems with these browser implementations.
-    # The second directive is for Microsoft Internet Explorer 4.0b2
-    # which has a broken HTTP/1.1 implementation and does not properly
-    # support keepalive when it is used on 301 or 302 (redirect) responses.
-    #
-    BrowserMatch "Mozilla/2" nokeepalive
-    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
-
-    #
-    # The following directive disables HTTP/1.1 responses to browsers which
-    # are in violation of the HTTP/1.0 spec by not being able to grok a
-    # basic 1.1 response.
-    #
-    BrowserMatch "RealPlayer 4\.0" force-response-1.0
-    BrowserMatch "Java/1\.0" force-response-1.0
-    BrowserMatch "JDK/1\.0" force-response-1.0
-
-</IfModule>
-# End of browser customization directives
-
-#
-# Allow server status reports, with the URL of http://servername/server-status
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-status>
-#    SetHandler server-status
-#    Order deny,allow
-#    Deny from all
-#    Allow from .example.com
-#</Location>
-
-#
-# Allow remote server configuration reports, with the URL of
-# http://servername/server-info (requires that mod_info.c be loaded).
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-info>
-#    SetHandler server-info
-#    Order deny,allow
-#    Deny from all
-#    Allow from .example.com
-#</Location>
-
-#
-# There have been reports of people trying to abuse an old bug from pre-1.1
-# days.  This bug involved a CGI script distributed as a part of Apache.
-# By uncommenting these lines you can redirect these attacks to a logging 
-# script on phf.apache.org.  Or, you can record them yourself, using the script
-# support/phf_abuse_log.cgi.
-#
-#<Location /cgi-bin/phf*>
-#    Deny from all
-#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
-#</Location>
-
-### Section 3: Virtual Hosts
-#
-# VirtualHost: If you want to maintain multiple domains/hostnames on your
-# machine you can setup VirtualHost containers for them. Most configurations
-# use only name-based virtual hosts so the server doesn't need to worry about
-# IP addresses. This is indicated by the asterisks in the directives below.
-#
-# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
-# for further details before you try to setup virtual hosts.
-#
-# You may use the command line option '-S' to verify your virtual host
-# configuration.
-
-#
-# Use name-based virtual hosting.
-#
-#NameVirtualHost *:80
-
-#
-# VirtualHost example:
-# Almost any Apache directive may go into a VirtualHost container.
-# The first VirtualHost section is used for requests without a known
-# server name.
-#
-#<VirtualHost *:80>
-#    ServerAdmin webmaster@dummy-host.example.com
-#    DocumentRoot /www/docs/dummy-host.example.com
-#    ServerName dummy-host.example.com
-#    ErrorLog logs/dummy-host.example.com-error_log
-#    CustomLog logs/dummy-host.example.com-access_log common
-#</VirtualHost>
-
-# By default, all external Apache modules are disabled.  To enable a particular
-# module for Apache, make sure the necessary packages are installed.  Then
-# uncomment the appropriate Include line below, save the file, and restart
-# Apache.  Note that some modules may need additional configuration steps.  For
-# example, mod_ssl requires a site certificate which you may need to generate.
-#
-# Lastly, if you remove a module package, be sure to edit this file and comment
-# out the appropriate Include line.
-
-# ==> mod_php configuration settings <==
-#
-# PACKAGES REQUIRED:  openssl-solibs (A series) and/or openssl (N series),
-#                     mysql (AP series), gmp (L series), mhash (L series),
-#                     and apache (N series)
-#
-#Include /etc/apache/mod_php.conf
-
-# ==> mod_ssl configuration settings <==
-#
-# PACKAGES REQUIRED:  apache (N series) and openssl (N series)
-#
-#Include /etc/apache/mod_ssl.conf
-
-#NameVirtualHost VSERVER_IP
-
-Include /etc/apache/vhosts
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/apache/php.ini b/templates/vserver-legacy/vserver-legacy.d/etc/apache/php.ini
deleted file mode 100644
index e6cddef..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/apache/php.ini
+++ /dev/null
@@ -1,1122 +0,0 @@
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-;
-; This is the recommended, PHP 4-style version of the php.ini-dist file.  It
-; sets some non standard settings, that make PHP more efficient, more secure,
-; and encourage cleaner coding.
-; The price is that with these settings, PHP may be incompatible with some
-; applications, and sometimes, more difficult to develop with.  Using this
-; file is warmly recommended for production sites.  As all of the changes from
-; the standard settings are thoroughly documented, you can go over each one,
-; and decide whether you want to use it or not.
-;
-; For general information about the php.ini file, please consult the php.ini-dist
-; file, included in your PHP distribution.
-;
-; This file is different from the php.ini-dist file in the fact that it features
-; different values for several directives, in order to improve performance, while
-; possibly breaking compatibility with the standard out-of-the-box behavior of
-; PHP 3.  Please make sure you read what's different, and modify your scripts
-; accordingly, if you decide to use this file instead.
-;
-; - register_globals = Off         [Security, Performance]
-;     Global variables are no longer registered for input data (POST, GET, cookies,
-;     environment and other server variables).  Instead of using $foo, you must use
-;     you can use $_REQUEST["foo"] (includes any variable that arrives through the
-;     request, namely, POST, GET and cookie variables), or use one of the specific
-;     $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
-;     on where the input originates.  Also, you can look at the
-;     import_request_variables() function.
-;     Note that register_globals is going to be depracated (i.e., turned off by
-;     default) in the next version of PHP, because it often leads to security bugs.
-;     Read http://php.net/manual/en/security.registerglobals.php for further
-;     information.
-; - display_errors = Off           [Security]
-;     With this directive set to off, errors that occur during the execution of
-;     scripts will no longer be displayed as a part of the script output, and thus,
-;     will no longer be exposed to remote users.  With some errors, the error message
-;     content may expose information about your script, web server, or database
-;     server that may be exploitable for hacking.  Production sites should have this
-;     directive set to off.
-; - log_errors = On                [Security]
-;     This directive complements the above one.  Any errors that occur during the
-;     execution of your script will be logged (typically, to your server's error log,
-;     but can be configured in several ways).  Along with setting display_errors to off,
-;     this setup gives you the ability to fully understand what may have gone wrong,
-;     without exposing any sensitive information to remote users.
-; - output_buffering = 4096        [Performance]
-;     Set a 4KB output buffer.  Enabling output buffering typically results in less
-;     writes, and sometimes less packets sent on the wire, which can often lead to
-;     better performance.  The gain this directive actually yields greatly depends
-;     on which Web server you're working with, and what kind of scripts you're using.
-; - register_argc_argv = Off       [Performance]
-;     Disables registration of the somewhat redundant $argv and $argc global
-;     variables.
-; - magic_quotes_gpc = Off         [Performance]
-;     Input data is no longer escaped with slashes so that it can be sent into
-;     SQL databases without further manipulation.  Instead, you should use the
-;     function addslashes() on each input element you wish to send to a database.
-; - variables_order = "GPCS"       [Performance]
-;     The environment variables are not hashed into the $HTTP_ENV_VARS[].  To access
-;     environment variables, you can use getenv() instead.
-; - error_reporting = E_ALL        [Code Cleanliness, Security(?)]
-;     By default, PHP surpresses errors of type E_NOTICE.  These error messages
-;     are emitted for non-critical errors, but that could be a symptom of a bigger
-;     problem.  Most notably, this will cause error messages about the use
-;     of uninitialized variables to be displayed.
-; - allow_call_time_pass_reference = Off     [Code cleanliness]
-;     It's not possible to decide to force a variable to be passed by reference
-;     when calling a function.  The PHP 4 style to do this is by making the
-;     function require the relevant argument by reference.
-
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-engine = On
-
-; Allow the <? tag.  Otherwise, only <?php and <script> tags are recognized.  
-; NOTE: Using short tags should be avoided when developing applications or
-; libraries that are meant for redistribution, or deployment on PHP
-; servers which are not under your control, because short tags may not
-; be supported on the target server. For portable, redistributable code,
-; be sure not to use short tags.
-short_open_tag = On
-
-; Allow ASP-style <% %> tags.
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-precision    =  14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-y2k_compliance = On
-
-; Output buffering allows you to send header lines (including cookies) even
-; after you send body content, at the price of slowing PHP's output layer a
-; bit.  You can enable output buffering during runtime by calling the output
-; buffering functions.  You can also enable output buffering for all files by
-; setting this directive to On.  If you wish to limit the size of the buffer
-; to a certain size - you can use a maximum number of bytes instead of 'On', as
-; a value for this directive (e.g., output_buffering=4096).
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function.  For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-;       directive. Instead, explicitly set the output handler using ob_start().
-;       Using this ini directive may cause problems unless you know what script 
-;       is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-;       and you cannot use both "ob_gzhandler" and "zlib.output_compression". 
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP 
-;       outputs chunks that are few handreds bytes each as a result of compression. 
-;       If you want larger chunk size for better performence, enable output_buffering 
-;       also. 
-; Note: output_handler must be empty if this is set 'On' !!!!
-;       Instead you must use zlib.output_handler.
-zlib.output_compression = Off
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block.  This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block.  Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instanciated.
-; A warning appears if the specified function is not defined, or if the
-; function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a 
-; callback-function.
-unserialize_callback_func=
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; Whether to enable the ability to force arguments to be passed by reference
-; at function call time.  This method is deprecated and is likely to be
-; unsupported in future versions of PHP/Zend.  The encouraged method of
-; specifying which arguments should be passed by reference is in the function
-; declaration.  You're encouraged to try and turn this option Off and make
-; sure your scripts work properly with it in order to ensure they will work
-; with future versions of the language (you will receive a warning each time
-; you use this feature, and the argument will be passed by value instead of by
-; reference).
-allow_call_time_pass_reference = Off
-
-;
-; Safe Mode
-;
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-safe_mode_include_dir =								
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here.  By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-;
-; Note:  If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv().  These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below.  This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_classes =
-
-; Colors for Syntax Highlighting mode.  Anything that's acceptable in
-; <font color="??????"> would work.
-;highlight.string  = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg      = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html    = #000000
-
-
-;
-; Misc
-;
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header).  It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-expose_php = On
-
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-max_execution_time = 30     ; Maximum execution time of each script, in seconds
-max_input_time = 60	; Maximum amount of time each script may spend parsing request data
-memory_limit = 8M      ; Maximum amount of memory a script may consume (8MB)
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; error_reporting is a bit-field.  Or each number up to get desired error
-; reporting level
-; E_ALL             - All errors and warnings
-; E_ERROR           - fatal run-time errors
-; E_WARNING         - run-time warnings (non-fatal errors)
-; E_PARSE           - compile-time parse errors
-; E_NOTICE          - run-time notices (these are warnings which often result
-;                     from a bug in your code, but it's possible that it was
-;                     intentional (e.g., using an uninitialized variable and
-;                     relying on the fact it's automatically initialized to an
-;                     empty string)
-; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
-;                     initial startup
-; E_COMPILE_ERROR   - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR      - user-generated error message
-; E_USER_WARNING    - user-generated warning message
-; E_USER_NOTICE     - user-generated notice message
-;
-; Examples:
-;
-;   - Show all errors, except for notices
-;
-;error_reporting = E_ALL & ~E_NOTICE
-;
-;   - Show only errors
-;
-;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
-;
-;   - Show all errors
-;
-error_reporting  =  E_ALL
-
-; Print out errors (as a part of the output).  For production web sites,
-; you're strongly encouraged to turn this feature off, and use error logging
-; instead (see below).  Keeping display_errors enabled on a production web site
-; may reveal security information to end users, such as file paths on your Web
-; server, your database schema or other information.
-display_errors = Off
-
-; Even when display_errors is on, errors that occur during PHP's startup
-; sequence are not displayed.  It's strongly recommended to keep
-; display_startup_errors off, except for when debugging.
-display_startup_errors = Off
-
-; Log errors into a log file (server-specific log, stderr, or error_log (below))
-; As stated above, you're strongly advised to use error logging in place of
-; error displaying on production web sites.
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line until ignore_repeated_source is set true.
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting 
-; is On you will not log errors with repeated messages from different files or
-; sourcelines.
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if 
-; error reporting includes E_WARNING in the allowed list
-report_memleaks = On
-
-; Store the last error/warning message in $php_errormsg (boolean).
-track_errors = Off
-
-; Disable the inclusion of HTML tags in error messages.
-;html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct 
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://www.php.net/docs.php 
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including 
-; the dot.
-;docref_root = "/phpmanual/"
-;docref_ext = .html
-  
-; String to output before an error message.
-;error_prepend_string = "<font color=ff0000>"
-
-; String to output after an error message.
-;error_append_string = "</font>"
-
-; Log errors to specified file.
-;error_log = filename
-
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-;
-; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
-
-; The separator used in PHP generated URLs to separate arguments.
-; Default is "&". 
-;arg_separator.output = "&amp;"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; Default is "&". 
-; NOTE: Every character in this directive is considered as separator!
-;arg_separator.input = ";&"
-
-; This directive describes the order in which PHP registers GET, POST, Cookie,
-; Environment and Built-in variables (G, P, C, E & S respectively, often
-; referred to as EGPCS or GPC).  Registration is done from left to right, newer
-; values override older values.
-variables_order = "GPCS"
-
-; Whether or not to register the EGPCS variables as global variables.  You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.  This makes most sense when coupled with track_vars - in which
-; case you can access all of the GPC variables through the $HTTP_*_VARS[],
-; variables.
-;
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on;  Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-register_globals = Off
-
-; This directive tells PHP whether to declare the argv&argc variables (that
-; would contain the GET information).  If you don't use these variables, you
-; should turn it off for increased performance.
-register_argc_argv = Off
-
-; Maximum size of POST data that PHP will accept.
-post_max_size = 8M
-
-; This directive is deprecated.  Use variables_order instead.
-gpc_order = "GPC"
-
-; Magic quotes
-;
-
-; Magic quotes for incoming GET/POST/Cookie data.
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-magic_quotes_runtime = Off    
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-magic_quotes_sybase = Off
-
-; Automatically add files before or after any PHP document.
-auto_prepend_file =
-auto_append_file =
-
-; As of 4.0b4, PHP always outputs a character encoding by default in
-; the Content-type: header.  To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-default_mimetype = "text/html"
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable.                               
-;always_populate_raw_post_data = On
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"  
-;include_path = ".:/php/includes"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues.  The alternate is to use the
-; cgi.force_redirect configuration below
-doc_root =
-
-; The directory under which PHP opens the script using /~usernamem used only
-; if nonempty.
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; extension_dir = "./"
-extension_dir = "/usr/lib/php/extensions/"
-
-; Whether or not to enable the dl() function.  The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers.  Left undefined, PHP turns this on by default.  You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request.
-; cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape 
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution.  Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
-; this to 1 will cause PHP CGI to fix it's paths to conform to the spec.  A setting
-; of zero causes PHP to behave as before.  Default is zero.  You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client.  This allows IIS to define the
-; security context that the request runs under.  mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS.  Default is zero.
-; fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection
-; fastcgi.log = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-;cgi.rfc2616_headers = 0 
-
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-upload_max_filesize = 10M
-
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-allow_url_fopen = On
-
-; Define the anonymous ftp password (your email address)
-;from="john@doe.com"
-
-; Define the user agent for php to send
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; auto_detect_line_endings = Off
-
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-;
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-;   extension=modulename.extension
-;
-; For example, on Windows:
-;
-;   extension=msql.dll
-;
-; ... or under UNIX:
-;
-;   extension=msql.so
-;
-; Note that it should be the name of the module only; no directory information 
-; needs to go here.  Specify the location of the extension with the
-; extension_dir directive above.
-;
-; Load the MySQL module by default.  Comment this out if you don't use MySQL.
-extension=mysql.so
-
-; Load the gettext extension by default.  Comment this out if you don't have the
-; gettext shared library installed.
-extension=gettext.so
-
-;Windows Extensions
-;Note that MySQL and ODBC support is now built in, so no dll is needed for it.
-;
-;extension=php_mbstring.dll
-;extension=php_bz2.dll
-;extension=php_cpdf.dll
-;extension=php_crack.dll
-;extension=php_curl.dll
-;extension=php_db.dll
-;extension=php_dba.dll
-;extension=php_dbase.dll
-;extension=php_dbx.dll
-;extension=php_domxml.dll
-;extension=php_exif.dll
-;extension=php_fdf.dll
-;extension=php_filepro.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_hyperwave.dll
-;extension=php_iconv.dll
-;extension=php_ifx.dll
-;extension=php_iisfunc.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_java.dll
-;extension=php_ldap.dll
-;extension=php_mcrypt.dll
-;extension=php_mhash.dll
-;extension=php_mime_magic.dll
-;extension=php_ming.dll
-;extension=php_mssql.dll
-;extension=php_msql.dll
-;extension=php_oci8.dll
-;extension=php_openssl.dll
-;extension=php_oracle.dll
-;extension=php_pdf.dll
-;extension=php_pgsql.dll
-;extension=php_printer.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_sockets.dll
-;extension=php_sybase_ct.dll
-;extension=php_w32api.dll
-;extension=php_xmlrpc.dll
-;extension=php_xslt.dll
-;extension=php_yaz.dll
-;extension=php_zip.dll
-
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
-; runtime, you can define these variables by calling define_syslog_variables().
-define_syslog_variables  = Off
-
-[mail function]
-; For Win32 only.
-SMTP = localhost
-smtp_port = 25
-
-; For Win32 only.
-;sendmail_from = me@example.com
-
-; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
-;sendmail_path =
-
-[Java]
-;java.class.path = .\php_java.jar
-;java.home = c:\jdk
-;java.library = c:\jdk\jre\bin\hotspot\jvm.dll 
-;java.library.path = .\
-
-[SQL]
-sql.safe_mode = Off
-
-[ODBC]
-;odbc.default_db    =  Not yet implemented
-;odbc.default_user  =  Not yet implemented
-;odbc.default_pw    =  Not yet implemented
-
-; Allow or prevent persistent links.
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-odbc.check_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-odbc.max_links = -1  
-
-; Handling of LONG fields.  Returns number of bytes to variables.  0 means
-; passthru.
-odbc.defaultlrl = 4096  
-
-; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of uodbc.defaultlrl and uodbc.defaultbinmode
-odbc.defaultbinmode = 1  
-
-[MySQL]
-; Allow or prevent persistent links.
-mysql.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-mysql.max_links = -1
-
-; Default port number for mysql_connect().  If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
-; at MYSQL_PORT.
-mysql.default_port =
-
-; Default socket name for local MySQL connects.  If empty, uses the built-in
-; MySQL defaults.
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password!  And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-mysql.trace_mode = Off
-
-[mSQL]
-; Allow or prevent persistent links.
-msql.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-msql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent).  -1 means no limit.
-msql.max_links = -1
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect(). 
-; Auto reset feature requires a little overheads.
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links.  -1 means no limit.
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent).  -1 means no limit.
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Noitce message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-pgsql.log_notice = 0
-
-[Sybase]
-; Allow or prevent persistent links.
-sybase.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-sybase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-sybase.max_links = -1
-
-;sybase.interface_file = "/usr/sybase/interfaces"
-
-; Minimum error severity to display.
-sybase.min_error_severity = 10
-
-; Minimum message severity to display.
-sybase.min_message_severity = 10
-
-; Compatability mode with old versions of PHP 3.0.
-; If on, this will cause PHP to automatically assign types to results according
-; to their Sybase type, instead of treating them all as strings.  This
-; compatibility mode will probably not stay around forever, so try applying
-; whatever necessary changes to your code, and turn it off.
-sybase.compatability_mode = Off
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-sybct.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-sybct.min_client_severity = 10
-
-[dbx]
-; returned column names can be converted for compatibility reasons
-; possible values for dbx.colnames_case are
-; "unchanged" (default, if not set)
-; "lowercase"
-; "uppercase"
-; the recommended default is either upper- or lowercase, but
-; unchanged is currently set for backwards compatibility
-dbx.colnames_case = "lowercase"
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-bcmath.scale = 0
-
-[browscap]
-;browscap = extra/browscap.ini
-
-[Informix]
-; Default host for ifx_connect() (doesn't apply in safe mode).
-ifx.default_host =
-
-; Default user for ifx_connect() (doesn't apply in safe mode).
-ifx.default_user =
-
-; Default password for ifx_connect() (doesn't apply in safe mode).
-ifx.default_password =
-
-; Allow or prevent persistent links.
-ifx.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-ifx.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-ifx.max_links = -1
-
-; If on, select statements return the contents of a text blob instead of its id.
-ifx.textasvarchar = 0
-
-; If on, select statements return the contents of a byte blob instead of its id.
-ifx.byteasvarchar = 0
-
-; Trailing blanks are stripped from fixed-length char columns.  May help the
-; life of Informix SE users.
-ifx.charasvarchar = 0
-
-; If on, the contents of text and byte blobs are dumped to a file instead of
-; keeping them in memory.
-ifx.blobinfile = 0
-
-; NULL's are returned as empty strings, unless this is set to 1.  In that case,
-; NULL's are returned as string 'NULL'.
-ifx.nullformat = 0
-
-[Session]
-; Handler used to store/retrieve data.
-session.save_handler = files
-
-; Argument passed to save_handler.  In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this 
-; variable in order to use PHP's session functions.
-;session.save_path = /tmp
-
-; Whether to use cookies.
-session.use_cookies = 1
-
-; This option enables administrators to make their users invulnerable to 
-; attacks which involve passing session ids in URLs; defaults to 0.
-; session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-session.cookie_domain =
-
-; Handler used to serialize data.  php is the standard serializer of PHP.
-session.serialize_handler = php
-
-; Define the probability that the 'garbage collection' process is started
-; on every session initialization.
-; The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts
-; on each request.
-
-session.gc_probability = 1
-session.gc_divisor     = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-session.gc_maxlifetime = 1440
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, albeit register_globals
-; is disabled.  PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled.
-
-session.bug_compat_42 = 0
-session.bug_compat_warn = 1
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-session.referer_check =
-
-; How many bytes to read from the file.
-session.entropy_length = 0
-
-; Specified here to create the session id.
-session.entropy_file =
-
-;session.entropy_length = 16
-
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects.
-; or leave this empty to avoid sending anti-caching headers.
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-;   to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-;   in publically accessible computer. 
-; - User may access your site with the same session ID
-;   always using URL stored in browser's history or bookmarks.
-session.use_trans_sid = 0
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs.  If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent).  -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatability mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647.  Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647.  Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch.  0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. Default = 25
-;mssql.max_procs = 25
-
-[Assertion]
-; Assert(expr); active by default.
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-;assert.warning = On
-
-; Don't bail out by default.
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-;assert.callback = 0
-
-; Eval the expression with current error_reporting().  Set to true if you want
-; error_reporting(0) around the eval().
-;assert.quiet_eval = 0
-
-[Ingres II]
-; Allow or prevent persistent links.
-ingres.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-ingres.max_persistent = -1
-
-; Maximum number of links, including persistents.  -1 means no limit.
-ingres.max_links = -1
-
-; Default database (format: [node_id::]dbname[/srv_class]).
-ingres.default_database =
-
-; Default user.
-ingres.default_user =
-
-; Default password.
-ingres.default_password =
-
-[Verisign Payflow Pro]
-; Default Payflow Pro server.
-pfpro.defaulthost = "test-payflow.verisign.com"
-
-; Default port to connect to.
-pfpro.defaultport = 443
-
-; Default timeout in seconds.
-pfpro.defaulttimeout = 30
-
-; Default proxy IP address (if required).
-;pfpro.proxyaddress =
-
-; Default proxy port.
-;pfpro.proxyport =
-
-; Default proxy logon.
-;pfpro.proxylogon =
-
-; Default proxy password.
-;pfpro.proxypassword =
-
-[com]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-;com.typelib_file = 
-; allow Distributed-COM calls
-;com.allow_dcom = true
-; autoregister constants of a components typlib on com_load()
-;com.autoregister_typelib = true
-; register constants casesensitive
-;com.autoregister_casesensitive = false
-; show warnings on duplicate constat registrations
-;com.autoregister_verbose = true
-
-[Printer]
-;printer.default_printer = ""
-
-[mbstring]
-; language for internal character representation.
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation accoding to 
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-;       portable libs/applications.
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means 
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-;mbstring.func_overload = 0
-
-[FrontBase]
-;fbsql.allow_persistent = On
-;fbsql.autocommit = On
-;fbsql.default_database = 
-;fbsql.default_database_password =
-;fbsql.default_host =
-;fbsql.default_password =
-;fbsql.default_user = "_SYSTEM"
-;fbsql.generate_warnings = Off
-;fbsql.max_connections = 128
-;fbsql.max_links = 128
-;fbsql.max_persistent = -1
-;fbsql.max_results = 128
-;fbsql.batchSize = 1000
-
-[Crack]
-; Modify the setting below to match the directory location of the cracklib
-; dictionary files.  Include the base filename, but not the file extension.
-; crack.default_dictionary = "c:\php\lib\cracklib_dict"
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. 
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding 
-; is used. For the decode settings you can distinguish between motorola and 
-; intel byte order. A decode setting cannot be empty.
-;exif.encode_unicode = ISO-8859-15
-;exif.decode_unicode_motorola = UCS-2BE
-;exif.decode_unicode_intel    = UCS-2LE
-;exif.encode_jis = 
-;exif.decode_jis_motorola = JIS
-;exif.decode_jis_intel    = JIS
-
-; Local Variables:
-; tab-width: 4
-; End:
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/apache/vhosts b/templates/vserver-legacy/vserver-legacy.d/etc/apache/vhosts
deleted file mode 100644
index e69de29..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/apache/vhosts
+++ /dev/null
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/hosts b/templates/vserver-legacy/vserver-legacy.d/etc/hosts
deleted file mode 100644
index 6e33147..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/hosts
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# hosts		This file describes a number of hostname-to-address
-#		mappings for the TCP/IP subsystem.  It is mostly
-#		used at boot time, when no name servers are running.
-#		On small systems, this file can be used instead of a
-#		"named" name server.  Just add the names, addresses
-#		and any aliases to this file...
-#
-# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
-# should NEVER be named with the name of the machine.  It causes problems
-# for some (stupid) programs, irc and reputedly talk. :^)
-#
-
-# For loopbacking.
-127.0.0.1	localhost
-# This next entry is technically wrong, but good enough to get TCP/IP apps
-# to quit complaining that they can't verify the hostname on a loopback-only
-# Linux box.
-127.0.0.1	darkstar.example.net darkstar
-
-# End of hosts.
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/logrotate.d/apache b/templates/vserver-legacy/vserver-legacy.d/etc/logrotate.d/apache
deleted file mode 100644
index f31fbe2..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/logrotate.d/apache
+++ /dev/null
@@ -1,11 +0,0 @@
-/var/log/apache/access_log /var/log/apache/error_log {
-    monthly
-    nomail
-    compress
-    create 0664 root root
-    rotate 12
-    postrotate
-      /etc/rc.d/rc.httpd restart > /dev/null
-    endscript
-}
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/profile b/templates/vserver-legacy/vserver-legacy.d/etc/profile
deleted file mode 100644
index 563594a..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/profile
+++ /dev/null
@@ -1,87 +0,0 @@
-# /etc/profile: This file contains system-wide defaults used by
-# all Bourne (and related) shells.
-
-# Set the values for some environment variables:
-export MINICOM="-c on"
-export MANPATH=/usr/local/man:/usr/man:/usr/X11R6/man
-export HOSTNAME="`cat /etc/HOSTNAME`"
-export LESSOPEN="|lesspipe.sh %s"
-export LESS="-M"
-
-# If the user doesn't have a .inputrc, use the one in /etc.
-if [ ! -r "$HOME/.inputrc" ]; then
-  export INPUTRC=/etc/inputrc
-fi
-
-# Set the default system $PATH:
-PATH="/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/games"
-
-# For root users, ensure that /usr/local/sbin, /usr/sbin, and /sbin are in
-# the $PATH.  Some means of connection don't add these by default (sshd comes
-# to mind).
-if [ "`id -u`" = "0" ]; then
-  echo $PATH | grep /usr/local/sbin 1> /dev/null 2> /dev/null
-  if [ ! $? = 0 ]; then
-    PATH=/usr/local/sbin:/usr/sbin:/sbin:$PATH
-  fi
-fi
-
-# I had problems using 'eval tset' instead of 'TERM=', but you might want to 
-# try it anyway. I think with the right /etc/termcap it would work great.
-# eval `tset -sQ "$TERM"`
-if [ "$TERM" = "" -o "$TERM" = "unknown" ]; then
- TERM=linux
-fi
-
-# Set ksh93 visual editing mode:
-if [ "$SHELL" = "/bin/ksh" ]; then
-  VISUAL=emacs
-#  VISUAL=gmacs
-#  VISUAL=vi
-fi
-
-# Set a default shell prompt:
-#PS1='`hostname`:`pwd`# '
-if [ "$SHELL" = "/bin/pdksh" ]; then
- PS1='! $ '
-elif [ "$SHELL" = "/bin/ksh" ]; then
- PS1='! ${PWD/#$HOME/~}$ '
-elif [ "$SHELL" = "/bin/zsh" ]; then
- PS1='%n@%m:%~%# '
-elif [ "$SHELL" = "/bin/ash" ]; then
- PS1='$ '
-else
- PS1='\u@\h:\w\$ '
-fi
-PS2='> '
-export PATH DISPLAY LESS TERM PS1 PS2
-
-# Default umask.  A umask of 022 prevents new files from being created group
-# and world writable.
-umask 022
-
-# Set up the LS_COLORS and LS_OPTIONS environment variables for color ls:
-if [ "$SHELL" = "/bin/zsh" ]; then
- eval `dircolors -z`
-elif [ "$SHELL" = "/bin/ash" ]; then
- eval `dircolors -s`
-else
- eval `dircolors -b`
-fi
-
-# Append any additional sh scripts found in /etc/profile.d/:
-for profile_script in /etc/profile.d/*.sh ; do
-  if [ -x $profile_script ]; then
-    . $profile_script
-  fi
-done
-unset profile_script
-
-# For non-root users, add the current directory to the search path:
-if [ ! "`id -u`" = "0" ]; then
- PATH="$PATH:."
-fi
-
-# firewall:
-export FTP_PASSIVE=1
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.0 b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.0
deleted file mode 100755
index bfec90a..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.0
+++ /dev/null
@@ -1,110 +0,0 @@
-#! /bin/sh
-#
-# rc.6		This file is executed by init when it goes into runlevel
-#		0 (halt) or runlevel 6 (reboot). It kills all processes,
-#		unmounts file systems and then either halts or reboots.
-#
-# Version:	@(#)/etc/rc.d/rc.6	2.47 Sat Jan 13 13:37:26 PST 2001
-#
-# Author:	Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
-# Modified by:  Patrick J. Volkerding, <volkerdi@slackware.com>
-#
-
-# Set the path.
-PATH=/sbin:/etc:/bin:/usr/bin
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
-  . /etc/rc.d/rc.sysvinit
-fi
-
-# Set linefeed mode to avoid staircase effect.
-stty onlcr
-
-echo "Running shutdown script $0:"
-
-# Find out how we were called.
-case "$0" in
-	*0)
-		command="halt"
-		;;
-	*6)
-		command=reboot
-		;;
-	*)
-		echo "$0: call me as \"rc.0\" or \"rc.6\" please!"
-		exit 1
-		;;
-esac
-
-# Stop the Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
-  /etc/rc.d/rc.httpd stop
-fi
-
-# Stop the MySQL database:
-if [ -r /var/run/mysql/mysql.pid ]; then
-  . /etc/rc.d/rc.mysqld stop
-fi
-
-# Stop the Samba server:
-if [ -x /etc/rc.d/rc.samba ]; then
-  . /etc/rc.d/rc.samba stop
-fi
-
-# Try to kill dhcpcd so the DHCP leases can be returned:
-killall -15 dhcpcd 1> /dev/null 2> /dev/null
-
-# Try to shut down pppd:
-PS="$(ps ax)"
-if echo "$PS" | grep -q -w pppd ; then
-  if [ -x /usr/sbin/ppp-off ]; then
-    /usr/sbin/ppp-off
-  fi
-fi
-
-# Turn off process accounting:
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
-  echo "Turning off process accounting."
-  /sbin/accton
-fi
-
-# Kill all processes.
-# INIT is supposed to handle this entirely now, but this didn't always
-# work correctly without this second pass at killing off the processes.
-# Since INIT already notified the user that processes were being killed,
-# we'll avoid echoing this info this time around.
-if [ "$1" != "fast" ]; then # shutdown did not already kill all processes
-  killall5 -15 
-  sleep 5
-  killall5 -9
-fi
-
-# Carry a random seed between reboots.
-echo "Saving random seed from /dev/urandom in /etc/random-seed."
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-chmod 600 /etc/random-seed
-
-# Before unmounting file systems write a reboot or halt record to wtmp.
-$command -w
-
-# Clear /var/lock/subsys.
-if [ -d /var/lock/subsys ]; then
-  rm -f /var/lock/subsys/*
-fi
-
-# This never hurts:
-sync
-
-# sleep 1 fixes problems with some hard drives that don't
-# otherwise finish syncing before reboot or poweroff
-sleep 1
-
-# This is to ensure all processes have completed on SMP machines:
-wait
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.4 b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.4
deleted file mode 100644
index b972052..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.4
+++ /dev/null
@@ -1,256 +0,0 @@
-#!/bin/sh
-#
-# rc.M		This file is executed by init(8) when the system is being
-#		initialized for one of the "multi user" run levels (i.e.
-#		levels 1 through 6).  It usually does mounting of file
-#		systems et al.
-#
-# Version:	@(#)/etc/rc.d/rc.M	2.23	Wed Feb 26 19:20:58 PST 2003
-#
-# Author:	Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-#		Heavily modified by Patrick Volkerding <volkerdi@slackware.com>
-#
-
-# Tell the viewers what's going to happen.
-echo "Going multiuser..."
-
-# Screen blanks after 15 minutes idle time, and powers down in one hour
-# if the kernel supports APM or ACPI power management:
-#/bin/setterm -blank 15 -powersave powerdown -powerdown 60
-
-# Set the hostname.
-#if [ -r /etc/HOSTNAME ]; then
-#  /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .)
-#else
-  # fall back on this old default:
-#  echo "darkstar.example.net" > /etc/HOSTNAME
-#  /bin/hostname darkstar
-#fi
-
-# Save the contents of 'dmesg':
-#/bin/dmesg -s 65536 > /var/log/dmesg
-
-# Start the system logger.
-if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then
-  . /etc/rc.d/rc.syslog start
-fi
-
-# Initialize PCMCIA devices:
-#
-# NOTE: This used to be started near the top of rc.S so that PCMCIA devices
-# could be fsck'ed along with the other drives.  This had some unfortunate
-# side effects, however, since root isn't yet read-write, and /var might not
-# even be mounted the .pid files can't be correctly written in /var/run and
-# the pcmcia system can't be correctly shut down.  If you want some PCMCIA
-# partition to be mounted at boot (or when the card is inserted) then add
-# the appropriate lines to /etc/pcmcia/scsi.opts.
-#
-if [ -x /etc/rc.d/rc.pcmcia ] ; then
-  . /etc/rc.d/rc.pcmcia start
-  # The cards might need a little extra time here to initialize.
-  if [ -r /var/run/cardmgr.pid ]; then
-    sleep 5
-  fi
-fi
-
-# Initialize the networking hardware.  If your network driver is a module
-# and you haven't loaded it manually, this will be deferred until after
-# the hotplug system loads the module below.
-#if [ -x /etc/rc.d/rc.inet1 ]; then
-#  . /etc/rc.d/rc.inet1
-#fi
-
-# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices:
-if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then
-  # Don't run hotplug if 'nohotplug' was given at boot.
-  if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
-    echo "Activating hardware detection:  /etc/rc.d/rc.hotplug start"
-    . /etc/rc.d/rc.hotplug start
-  fi
-fi
-
-# Start networking daemons:
-if [ -x /etc/rc.d/rc.inet2 ]; then
-  . /etc/rc.d/rc.inet2
-fi
-
-# Remove stale locks and junk files (must be done after mount -a!)
-/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null
-
-# Remove stale hunt sockets so the game can start.
-if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then
-  echo "Removing your stale hunt sockets from /tmp."
-  /bin/rm -f /tmp/hunt*
-fi
-
-# Ensure basic filesystem permissions sanity.
-chmod 755 / 2> /dev/null
-chmod 1777 /tmp /var/tmp
-
-# Update all the shared library links:
-if [ -x /sbin/ldconfig ]; then
-  echo "Updating shared library links:  /sbin/ldconfig"
-  /sbin/ldconfig
-fi
-
-# Update the X font indexes:
-if [ -x /usr/X11R6/bin/fc-cache ]; then
-  echo "Updating X font indexes:  /usr/X11R6/bin/fc-cache"
-  /usr/X11R6/bin/fc-cache
-fi
-
-# Start the print spooling system.  This will usually be LPRng (lpd) or CUPS.
-if [ -x /etc/rc.d/rc.cups ]; then
-  # Start CUPS:
-  /etc/rc.d/rc.cups start
-elif [ -x /etc/rc.d/rc.lprng ]; then
-  # Start LPRng (lpd):
-  . /etc/rc.d/rc.lprng start
-fi
-
-# Start netatalk. (a file/print server for Macs using Appletalk)
-if [ -x /etc/rc.d/rc.atalk ]; then
-  /etc/rc.d/rc.atalk
-fi
-
-# Start smartd, which monitors the status of S.M.A.R.T. compatible
-# hard drives and reports any problems.  Note some devices (which aren't
-# smart, I guess ;) will hang if probed by smartd, so it's commented out
-# by default.
-#if [ -x /usr/sbin/smartd ]; then
-#  /usr/sbin/smartd
-#fi
-
-# Monitor the UPS with genpowerd.
-# To use this, uncomment this section and edit your settings in
-# /etc/genpowerd.conf (serial device, UPS type, etc).  For more information,
-# see "man genpowerd" or the extensive documentation in the
-# /usr/doc/genpower-1.0.3 directory.
-# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want
-# support for stopping the UPS's inverter after the machine halts.
-#if [ -x /sbin/genpowerd ]; then
-#  echo "Starting genpowerd daemon..."
-#  /sbin/genpowerd
-#fi
-
-# Turn on process accounting.  To enable process accounting, make sure the
-# option for BSD process accounting is enabled in your kernel, and then
-# create the file /var/log/pacct (touch /var/log/pacct).  By default, process
-# accounting is not enabled (since /var/log/pacct does not exist).  This is
-# because the log file can get VERY large.
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
-  /sbin/accton /var/log/pacct
-  chmod 640 /var/log/pacct
-  echo "Process accounting turned on."
-fi
-
-# Start crond (Dillon's crond):
-# If you want cron to actually log activity to /var/log/cron, then change
-# -l10 to -l8 to increase the logging level.
-if [ -x /usr/sbin/crond ]; then
-  /usr/sbin/crond -l10 >>/var/log/cron 2>&1
-fi
-
-# Start atd (manages jobs scheduled with 'at'):
-if [ -x /usr/sbin/atd ]; then
-  /usr/sbin/atd -b 15 -l 1
-fi
-
-# Slackware-Mini-Quota-HOWTO:
-# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to
-# the appropriate partitions as listed in /etc/fstab.  Here's an example:
-#
-# /dev/hda2      /home      ext3     defaults,usrquota      1   1
-#
-# You'll then need to setup initial quota files at the top of the partitions
-# to support quota, like this:
-# touch /home/aquota.user /home/aquota.group
-# chmod 600 /home/aquota.user /home/aquota.group
-#
-# Then, reboot to activate the system.
-# To edit user quotas, use 'edquota'.  See 'man edquota'.  Also, the
-# official Quota Mini-HOWTO has lots of useful information.  That can be found
-# here:  /usr/doc/Linux-HOWTOs/Quota
-
-# Check quotas and then turn quota system on:
-if grep -q quota /etc/fstab ; then
-  if [ -x /sbin/quotacheck ]; then
-    echo "Checking filesystem quotas:  /sbin/quotacheck -avugm"
-    /sbin/quotacheck -avugm
-  fi
-  if [ -x /sbin/quotaon ]; then
-    echo "Activating filesystem quotas:  /sbin/quotaon -avug"
-    /sbin/quotaon -avug
-  fi
-fi
-
-# Start the sendmail daemon:
-if [ -x /etc/rc.d/rc.sendmail ]; then
-  . /etc/rc.d/rc.sendmail start
-fi
-
-# Start the APM daemon if APM is enabled in the kernel:
-if [ -x /usr/sbin/apmd ]; then
-  if cat /proc/apm 1> /dev/null 2> /dev/null ; then
-    echo "Starting APM daemon:  /usr/sbin/apmd"
-    /usr/sbin/apmd
-  fi
-fi
-
-# Start the ACPI (Advanced Configuration and Power Interface) daemon:
-if [ -x /etc/rc.d/rc.acpid ]; then
-  . /etc/rc.d/rc.acpid start
-fi
-
-# Load ALSA (sound) defaults:
-if [ -x /etc/rc.d/rc.alsa ]; then
-  . /etc/rc.d/rc.alsa
-fi
-
-# Load a custom screen font if the user has an rc.font script.
-if [ -x /etc/rc.d/rc.font ]; then
-  . /etc/rc.d/rc.font
-fi
-
-# Load a custom keymap if the user has an rc.keymap script.
-if [ -x /etc/rc.d/rc.keymap ]; then
-  . /etc/rc.d/rc.keymap
-fi
-
-# Initialize HP Officejet support:
-if [ -x /etc/rc.d/rc.hpoj ]; then
-  . /etc/rc.d/rc.hpoj start
-fi
-
-# Start the MySQL database:
-if [ -x /etc/rc.d/rc.mysqld ]; then
-  . /etc/rc.d/rc.mysqld start
-fi
-
-# Start Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
-  . /etc/rc.d/rc.httpd start
-fi
-
-# Start Samba (a file/print server for Win95/NT machines).
-# Samba can be started in /etc/inetd.conf instead.
-if [ -x /etc/rc.d/rc.samba ]; then
-  . /etc/rc.d/rc.samba start
-fi
-
-# Start the GPM mouse server:
-if [ -x /etc/rc.d/rc.gpm ]; then
-  . /etc/rc.d/rc.gpm start
-fi
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
-  . /etc/rc.d/rc.sysvinit
-fi
-
-# Start the local setup procedure.
-if [ -x /etc/rc.d/rc.local ]; then
-  . /etc/rc.d/rc.local
-fi
-
-# All done.
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.6 b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.6
deleted file mode 100755
index bfec90a..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.6
+++ /dev/null
@@ -1,110 +0,0 @@
-#! /bin/sh
-#
-# rc.6		This file is executed by init when it goes into runlevel
-#		0 (halt) or runlevel 6 (reboot). It kills all processes,
-#		unmounts file systems and then either halts or reboots.
-#
-# Version:	@(#)/etc/rc.d/rc.6	2.47 Sat Jan 13 13:37:26 PST 2001
-#
-# Author:	Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
-# Modified by:  Patrick J. Volkerding, <volkerdi@slackware.com>
-#
-
-# Set the path.
-PATH=/sbin:/etc:/bin:/usr/bin
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
-  . /etc/rc.d/rc.sysvinit
-fi
-
-# Set linefeed mode to avoid staircase effect.
-stty onlcr
-
-echo "Running shutdown script $0:"
-
-# Find out how we were called.
-case "$0" in
-	*0)
-		command="halt"
-		;;
-	*6)
-		command=reboot
-		;;
-	*)
-		echo "$0: call me as \"rc.0\" or \"rc.6\" please!"
-		exit 1
-		;;
-esac
-
-# Stop the Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
-  /etc/rc.d/rc.httpd stop
-fi
-
-# Stop the MySQL database:
-if [ -r /var/run/mysql/mysql.pid ]; then
-  . /etc/rc.d/rc.mysqld stop
-fi
-
-# Stop the Samba server:
-if [ -x /etc/rc.d/rc.samba ]; then
-  . /etc/rc.d/rc.samba stop
-fi
-
-# Try to kill dhcpcd so the DHCP leases can be returned:
-killall -15 dhcpcd 1> /dev/null 2> /dev/null
-
-# Try to shut down pppd:
-PS="$(ps ax)"
-if echo "$PS" | grep -q -w pppd ; then
-  if [ -x /usr/sbin/ppp-off ]; then
-    /usr/sbin/ppp-off
-  fi
-fi
-
-# Turn off process accounting:
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
-  echo "Turning off process accounting."
-  /sbin/accton
-fi
-
-# Kill all processes.
-# INIT is supposed to handle this entirely now, but this didn't always
-# work correctly without this second pass at killing off the processes.
-# Since INIT already notified the user that processes were being killed,
-# we'll avoid echoing this info this time around.
-if [ "$1" != "fast" ]; then # shutdown did not already kill all processes
-  killall5 -15 
-  sleep 5
-  killall5 -9
-fi
-
-# Carry a random seed between reboots.
-echo "Saving random seed from /dev/urandom in /etc/random-seed."
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-chmod 600 /etc/random-seed
-
-# Before unmounting file systems write a reboot or halt record to wtmp.
-$command -w
-
-# Clear /var/lock/subsys.
-if [ -d /var/lock/subsys ]; then
-  rm -f /var/lock/subsys/*
-fi
-
-# This never hurts:
-sync
-
-# sleep 1 fixes problems with some hard drives that don't
-# otherwise finish syncing before reboot or poweroff
-sleep 1
-
-# This is to ensure all processes have completed on SMP machines:
-wait
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.K b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.K
deleted file mode 100755
index 00a1501..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.K
+++ /dev/null
@@ -1,88 +0,0 @@
-#! /bin/sh
-#
-# rc.K 		This file is executed by init when it goes into runlevel
-#		1, which is the administrative state. It kills all
-#		daemons and then puts the system into single user mode.
-#		Note that the file systems are kept mounted.
-#
-# Version:	@(#)/etc/rc.d/rc.K	3.1415 Sat Jan 13 13:37:26 PST 2001
-#
-# Author:	Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
-# Modified by:  Patrick J. Volkerding <volkerdi@slackware.com>
-#
-
-# Set the path.
-PATH=/sbin:/bin:/usr/bin:/usr/sbin
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
-  . /etc/rc.d/rc.sysvinit
-fi
-
-# Try to turn off quota:
-if grep -q quota /etc/fstab ; then
-  if [ -x /sbin/quotaoff ]; then
-    echo "Turning off filesystem quotas."
-    /sbin/quotaoff -a
-  fi
-fi
-
-# Try to turn off accounting:
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
-  echo "Turning off accounting."
-  /sbin/accton
-fi
-
-# Stop the Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
-  /etc/rc.d/rc.httpd stop
-fi
-
-# Stop the Samba server:
-if [ -x /etc/rc.d/rc.samba ]; then
-  . /etc/rc.d/rc.samba stop
-fi
-
-# Shut down the NFS server:
-if [ -x /etc/rc.d/rc.nfsd ]; then
-  /etc/rc.d/rc.nfsd stop
-fi
-
-# Shut down PCMCIA devices:
-if [ -x /etc/rc.d/rc.pcmcia ] ; then
-  . /etc/rc.d/rc.pcmcia stop
-  # The cards might need a little extra time here to initialize.
-  sleep 5
-fi
-
-# Kill all processes.
-echo
-echo "Sending all processes the SIGHUP signal."
-killall5 -1
-echo -n "Waiting for processes to hang up"
-for loop in 0 1 2 3 4 5 ; do
-  sleep 1
-  echo -n "."
-done
-echo
-echo "Sending all processes the SIGTERM signal."
-killall5 -15
-echo -n "Waiting for processes to terminate"
-for loop in 0 1 2 3 4 5 ; do
-  sleep 1
-  echo -n "."
-done
-echo
-echo "Sending all processes the SIGKILL signal."
-killall5 -9
-echo -n "Waiting for processes to exit"
-for loop in 0 1 2 3 4 5 ; do
-  sleep 1
-  echo -n "."
-done
-echo
-
-# Now go to the single user level
-echo "Going to single user mode..."
-telinit -t 1 1
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.M b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.M
deleted file mode 100755
index 0cb3343..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.M
+++ /dev/null
@@ -1,256 +0,0 @@
-#!/bin/sh
-#
-# rc.M		This file is executed by init(8) when the system is being
-#		initialized for one of the "multi user" run levels (i.e.
-#		levels 1 through 6).  It usually does mounting of file
-#		systems et al.
-#
-# Version:	@(#)/etc/rc.d/rc.M	2.23	Wed Feb 26 19:20:58 PST 2003
-#
-# Author:	Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-#		Heavily modified by Patrick Volkerding <volkerdi@slackware.com>
-#
-
-# Tell the viewers what's going to happen.
-echo "Going multiuser..."
-
-# Screen blanks after 15 minutes idle time, and powers down in one hour
-# if the kernel supports APM or ACPI power management:
-#/bin/setterm -blank 15 -powersave powerdown -powerdown 60
-
-# Set the hostname.
-#if [ -r /etc/HOSTNAME ]; then
-#  /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .)
-#else
-  # fall back on this old default:
-#  echo "darkstar.example.net" > /etc/HOSTNAME
-#  /bin/hostname darkstar
-#fi
-
-# Save the contents of 'dmesg':
-#/bin/dmesg -s 65536 > /var/log/dmesg
-
-# Start the system logger.
-if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then
-  . /etc/rc.d/rc.syslog start
-fi
-
-# Initialize PCMCIA devices:
-#
-# NOTE: This used to be started near the top of rc.S so that PCMCIA devices
-# could be fsck'ed along with the other drives.  This had some unfortunate
-# side effects, however, since root isn't yet read-write, and /var might not
-# even be mounted the .pid files can't be correctly written in /var/run and
-# the pcmcia system can't be correctly shut down.  If you want some PCMCIA
-# partition to be mounted at boot (or when the card is inserted) then add
-# the appropriate lines to /etc/pcmcia/scsi.opts.
-#
-if [ -x /etc/rc.d/rc.pcmcia ] ; then
-  . /etc/rc.d/rc.pcmcia start
-  # The cards might need a little extra time here to initialize.
-  if [ -r /var/run/cardmgr.pid ]; then
-    sleep 5
-  fi
-fi
-
-# Initialize the networking hardware.  If your network driver is a module
-# and you haven't loaded it manually, this will be deferred until after
-# the hotplug system loads the module below.
-#if [ -x /etc/rc.d/rc.inet1 ]; then
-#  . /etc/rc.d/rc.inet1
-#fi
-
-# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices:
-if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then
-  # Don't run hotplug if 'nohotplug' was given at boot.
-  if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
-    echo "Activating hardware detection:  /etc/rc.d/rc.hotplug start"
-    . /etc/rc.d/rc.hotplug start
-  fi
-fi
-
-# Start networking daemons:
-if [ -x /etc/rc.d/rc.inet2 ]; then
-  . /etc/rc.d/rc.inet2
-fi
-
-# Remove stale locks and junk files (must be done after mount -a!)
-/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null
-
-# Remove stale hunt sockets so the game can start.
-if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then
-  echo "Removing your stale hunt sockets from /tmp."
-  /bin/rm -f /tmp/hunt*
-fi
-
-# Ensure basic filesystem permissions sanity.
-chmod 755 / 2> /dev/null
-chmod 1777 /tmp /var/tmp
-
-# Update all the shared library links:
-if [ -x /sbin/ldconfig ]; then
-  echo "Updating shared library links: /sbin/ldconfig"
-  /sbin/ldconfig
-fi
-
-# Update the X font indexes:
-if [ -x /usr/X11R6/bin/fc-cache ]; then
-  echo "Updating X font indexes: /usr/X11R6/bin/fc-cache"
-  /usr/X11R6/bin/fc-cache
-fi
-
-# Start the print spooling system.  This will usually be LPRng (lpd) or CUPS.
-if [ -x /etc/rc.d/rc.cups ]; then
-  # Start CUPS:
-  /etc/rc.d/rc.cups start
-elif [ -x /etc/rc.d/rc.lprng ]; then
-  # Start LPRng (lpd):
-  . /etc/rc.d/rc.lprng start
-fi
-
-# Start netatalk. (a file/print server for Macs using Appletalk)
-if [ -x /etc/rc.d/rc.atalk ]; then
-  /etc/rc.d/rc.atalk
-fi
-
-# Start smartd, which monitors the status of S.M.A.R.T. compatible
-# hard drives and reports any problems.  Note some devices (which aren't
-# smart, I guess ;) will hang if probed by smartd, so it's commented out
-# by default.
-#if [ -x /usr/sbin/smartd ]; then
-#  /usr/sbin/smartd
-#fi
-
-# Monitor the UPS with genpowerd.
-# To use this, uncomment this section and edit your settings in
-# /etc/genpowerd.conf (serial device, UPS type, etc).  For more information,
-# see "man genpowerd" or the extensive documentation in the
-# /usr/doc/genpower-1.0.3 directory.
-# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want
-# support for stopping the UPS's inverter after the machine halts.
-#if [ -x /sbin/genpowerd ]; then
-#  echo "Starting genpowerd daemon..."
-#  /sbin/genpowerd
-#fi
-
-# Turn on process accounting.  To enable process accounting, make sure the
-# option for BSD process accounting is enabled in your kernel, and then
-# create the file /var/log/pacct (touch /var/log/pacct).  By default, process
-# accounting is not enabled (since /var/log/pacct does not exist).  This is
-# because the log file can get VERY large.
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
-  /sbin/accton /var/log/pacct
-  chmod 640 /var/log/pacct
-  echo "Process accounting turned on."
-fi
-
-# Start crond (Dillon's crond):
-# If you want cron to actually log activity to /var/log/cron, then change
-# -l10 to -l8 to increase the logging level.
-if [ -x /usr/sbin/crond ]; then
-  /usr/sbin/crond -l10 >>/var/log/cron 2>&1
-fi
-
-# Start atd (manages jobs scheduled with 'at'):
-if [ -x /usr/sbin/atd ]; then
-  /usr/sbin/atd -b 15 -l 1
-fi
-
-# Slackware-Mini-Quota-HOWTO:
-# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to
-# the appropriate partitions as listed in /etc/fstab.  Here's an example:
-#
-# /dev/hda2      /home      ext3     defaults,usrquota      1   1
-#
-# You'll then need to setup initial quota files at the top of the partitions
-# to support quota, like this:
-# touch /home/aquota.user /home/aquota.group
-# chmod 600 /home/aquota.user /home/aquota.group
-#
-# Then, reboot to activate the system.
-# To edit user quotas, use 'edquota'.  See 'man edquota'.  Also, the
-# official Quota Mini-HOWTO has lots of useful information.  That can be found
-# here:  /usr/doc/Linux-HOWTOs/Quota
-
-# Check quotas and then turn quota system on:
-if grep -q quota /etc/fstab ; then
-  if [ -x /sbin/quotacheck ]; then
-    echo "Checking filesystem quotas:  /sbin/quotacheck -avugm"
-    /sbin/quotacheck -avugm
-  fi
-  if [ -x /sbin/quotaon ]; then
-    echo "Activating filesystem quotas:  /sbin/quotaon -avug"
-    /sbin/quotaon -avug
-  fi
-fi
-
-# Start the sendmail daemon:
-if [ -x /etc/rc.d/rc.sendmail ]; then
-  . /etc/rc.d/rc.sendmail start
-fi
-
-# Start the APM daemon if APM is enabled in the kernel:
-if [ -x /usr/sbin/apmd ]; then
-  if cat /proc/apm 1> /dev/null 2> /dev/null ; then
-    echo "Starting APM daemon:  /usr/sbin/apmd"
-    /usr/sbin/apmd
-  fi
-fi
-
-# Start the ACPI (Advanced Configuration and Power Interface) daemon:
-if [ -x /etc/rc.d/rc.acpid ]; then
-  . /etc/rc.d/rc.acpid start
-fi
-
-# Load ALSA (sound) defaults:
-if [ -x /etc/rc.d/rc.alsa ]; then
-  . /etc/rc.d/rc.alsa
-fi
-
-# Load a custom screen font if the user has an rc.font script.
-if [ -x /etc/rc.d/rc.font ]; then
-  . /etc/rc.d/rc.font
-fi
-
-# Load a custom keymap if the user has an rc.keymap script.
-if [ -x /etc/rc.d/rc.keymap ]; then
-  . /etc/rc.d/rc.keymap
-fi
-
-# Initialize HP Officejet support:
-if [ -x /etc/rc.d/rc.hpoj ]; then
-  . /etc/rc.d/rc.hpoj start
-fi
-
-# Start the MySQL database:
-if [ -x /etc/rc.d/rc.mysqld ]; then
-  . /etc/rc.d/rc.mysqld start
-fi
-
-# Start Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
-  . /etc/rc.d/rc.httpd start
-fi
-
-# Start Samba (a file/print server for Win95/NT machines).
-# Samba can be started in /etc/inetd.conf instead.
-if [ -x /etc/rc.d/rc.samba ]; then
-  . /etc/rc.d/rc.samba start
-fi
-
-# Start the GPM mouse server:
-if [ -x /etc/rc.d/rc.gpm ]; then
-  . /etc/rc.d/rc.gpm start
-fi
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
-  . /etc/rc.d/rc.sysvinit
-fi
-
-# Start the local setup procedure.
-if [ -x /etc/rc.d/rc.local ]; then
-  . /etc/rc.d/rc.local
-fi
-
-# All done.
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.S b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.S
deleted file mode 100755
index 05c75b4..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.S
+++ /dev/null
@@ -1,294 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.S:  System initialization script.
-#
-# Mostly written by:  Patrick J. Volkerding, <volkerdi@slackware.com>
-#
-
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-
-# Mount /proc right away:
-/sbin/mount -v proc /proc -n -t proc
-
-# If 'nohotplug' was given at boot, or rc.hotplug has been turned off
-# (is not executable), then shut off hotplugging in the kernel now.
-# Turning off hotplug is *not* recommended, and will break some things.
-if [ -w /proc/sys/kernel/hotplug ]; then
-  if grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
-    echo "/dev/null" > /proc/sys/kernel/hotplug
-  elif [ ! -x /etc/rc.d/rc.hotplug ]; then
-    echo "/dev/null" > /proc/sys/kernel/hotplug
-  fi
-fi
-
-# Start devfsd if necessary.  On newer kernels, udev should be used instead.
-if [ -x /etc/rc.d/rc.devfsd ]; then
-  /etc/rc.d/rc.devfsd start
-fi
-
-# Mount sysfs next, if the kernel supports it:
-if [ -d /sys ]; then
-  if cat /proc/filesystems | grep -w sysfs 1> /dev/null 2> /dev/null ; then
-    if ! cat /proc/mounts | grep -w sysfs 1> /dev/null 2> /dev/null ; then
-      /sbin/mount -v sysfs /sys -n -t sysfs
-    fi
-  fi
-fi
-
-# Initialize udev to manage /dev entries for 2.6.x kernels:
-if [ -x /etc/rc.d/rc.udev ]; then
-  if ! grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
-    /etc/rc.d/rc.udev
-  fi
-fi
-
-# Enable swapping:
-/sbin/swapon -a
-
-# Test to see if the root partition is read-only, like it ought to be.
-READWRITE=no
-if touch /fsrwtestfile 2>/dev/null; then
-  rm -f /fsrwtestfile
-  READWRITE=yes
-else
-  echo "Testing root filesystem status:  read-only filesystem"
-fi
-
-# See if a forced filesystem check was requested at shutdown:
-if [ -r /etc/forcefsck ]; then
-  FORCEFSCK="-f"
-fi
-
-# Check the root filesystem:
-if [ ! $READWRITE = yes ]; then
-  RETVAL=0
-  if [ ! -r /etc/fastboot ]; then
-    echo "Checking root filesystem:"
-    /sbin/fsck $FORCEFSCK -C -a /
-    RETVAL=$?
-  fi
-  # An error code of 2 or higher will require a reboot.
-  if [ $RETVAL -ge 2 ]; then
-    # An error code equal to or greater than 4 means that some errors
-    # could not be corrected.  This requires manual attention, so we
-    # offer a chance to try to fix the problem in single-user mode:
-    if [ $RETVAL -ge 4 ]; then
-      echo
-      echo "***********************************************************"
-      echo "*** An error occurred during the root filesystem check. ***"
-      echo "*** You will now be given a chance to log into the      ***"
-      echo "*** system in single-user mode to fix the problem.      ***"
-      echo "***                                                     ***"
-      echo "*** If you are using the ext2 filesystem, running       ***"
-      echo "*** 'e2fsck -v -y <partition>' might help.              ***"
-      echo "***********************************************************"
-      echo
-      echo "Once you exit the single-user shell, the system will reboot."
-      echo
-      PS1="(Repair filesystem) \#"; export PS1
-      sulogin
-    else # With an error code of 2 or 3, reboot the machine automatically:
-      echo
-      echo "***********************************"
-      echo "*** The filesystem was changed. ***"
-      echo "*** The system will now reboot. ***"
-      echo "***********************************"
-      echo
-    fi
-    echo "Unmounting file systems."
-    /sbin/umount -a -r
-    /sbin/mount -n -o remount,ro /
-    echo "Rebooting system."
-    sleep 2
-    reboot -f
-  fi
-  # Remount the root filesystem in read-write mode
-  echo "Remounting root device with read-write enabled."
-  /sbin/mount -w -v -n -o remount /
-  if [ $? -gt 0 ] ; then
-    echo
-    echo "Attempt to remount root device as read-write failed!  This is going to"
-    echo "cause serious problems."
-    echo 
-    echo "If you're using the UMSDOS filesystem, you **MUST** mount the root partition"
-    echo "read-write!  You can make sure the root filesystem is getting mounted "
-    echo "read-write with the 'rw' flag to Loadlin:"
-    echo
-    echo "loadlin vmlinuz root=/dev/hda1 rw   (replace /dev/hda1 with your root device)"
-    echo
-    echo "Normal bootdisks can be made to mount a system read-write with the rdev command:"
-    echo
-    echo "rdev -R /dev/fd0 0"
-    echo
-    echo "You can also get into your system by using a boot disk with a command like this"
-    echo "on the LILO prompt line:  (change the root partition name as needed)"
-    echo 
-    echo "LILO: mount root=/dev/hda1 rw"
-    echo
-    echo "Please press ENTER to continue, then reboot and use one of the above methods to"
-    echo -n "get into your machine and start looking for the problem. " 
-    read junk; 
-  fi
-else
-  echo "Testing root filesystem status:  read-write filesystem"
-  if cat /etc/fstab | grep ' / ' | grep umsdos 1> /dev/null 2> /dev/null ; then
-    ROOTTYPE="umsdos"
-  fi
-  if [ ! "$ROOTTYPE" = "umsdos" ]; then # no warn for UMSDOS
-    echo
-    echo "*** ERROR: Root partition has already been mounted read-write. Cannot check!"
-    echo
-    echo "For filesystem checking to work properly, your system must initially mount"
-    echo "the root partition as read only. Please modify your kernel with 'rdev' so that"
-    echo "it does this. If you're booting with LILO, add a line:"
-    echo
-    echo "   read-only"
-    echo
-    echo "to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it."
-    echo
-    echo "If you boot from a kernel on a floppy disk, put it in the drive and type:"
-    echo "   rdev -R /dev/fd0 1"
-    echo
-    echo "If you boot from a bootdisk, or with Loadlin, you can add the 'ro' flag."
-    echo
-    echo "This will fix the problem *AND* eliminate this annoying message. :^)"
-    echo
-    echo -n "Press ENTER to continue. "
-    read junk;
-  fi
-fi # Done checking root filesystem
-
-# Any /etc/mtab that exists here is old, so we delete it to start over:
-/bin/rm -f /etc/mtab*
-# Remounting the / partition will initialize the new /etc/mtab:
-/sbin/mount -w -o remount /
-
-# Fix /etc/mtab to list sys and proc if they were not yet entered in
-# /etc/mtab because / was still mounted read-only:
-if [ -d /proc/sys ]; then
-  /sbin/mount -f proc /proc -t proc
-fi
-if [ -d /sys/bus ]; then
-  /sbin/mount -f sysfs /sys -t sysfs
-fi
-
-# Set the system time from the hardware clock using hwclock --hctosys.
-if [ -x /sbin/hwclock ]; then
-  if grep "^UTC" /etc/hardwareclock 1> /dev/null 2> /dev/null ; then
-    echo "Setting system time from the hardware clock (UTC)."
-    /sbin/hwclock --utc --hctosys
-  else
-    echo "Setting system time from the hardware clock (localtime)."
-    /sbin/hwclock --localtime --hctosys
-  fi
-fi
-
-# Configure ISA Plug-and-Play devices:
-if [ -r /etc/isapnp.conf ]; then
-  if [ -x /sbin/isapnp ]; then
-    /sbin/isapnp /etc/isapnp.conf
-  fi
-fi
-
-# This loads any kernel modules that are needed.  These might be required to
-# use your ethernet card, sound card, or other optional hardware.
-if [ -x /etc/rc.d/rc.modules -a -r /proc/modules ]; then
-  . /etc/rc.d/rc.modules
-fi
-
-# Configure runtime kernel parameters:
-if [ -x /sbin/sysctl -a -r /etc/sysctl.conf ]; then
-  /sbin/sysctl -e -p /etc/sysctl.conf
-fi
-
-# Initialize the Logical Volume Manager.
-# This won't start unless we find /etc/lvmtab (LVM1) or 
-# /etc/lvm/backup/ (LVM2).  This is created by /sbin/vgscan, so to
-# use LVM you must run /sbin/vgscan yourself the first time (and
-# create some VGs and LVs).
-if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
-  echo "Initializing LVM (Logical Volume Manager):"
-  # Check for device-mapper support.
-  if ! cat /proc/devices | grep -w device-mapper 1> /dev/null 2> /dev/null ; then
-    # If device-mapper exists as a module, try to load it.
-    if [ -r /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko ]; then
-      insmod /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko
-    fi
-  fi
-  # Scan for new volume groups:
-  /sbin/vgscan 2> /dev/null
-  if [ $? = 0 ]; then
-    # This needs a moment to register.
-    sleep 10
-    # Make volume groups available to the kernel.
-    # This should also make logical volumes available.
-    /sbin/vgchange -ay
-    # Enable swapping again in case any LVs are used for swap.  Ignore previous error.  :-)
-    /sbin/swapon -a
-  fi
-fi
-
-# Check all the non-root filesystems:
-if [ ! -r /etc/fastboot ]; then
-  echo "Checking non-root filesystems:"
-  /sbin/fsck $FORCEFSCK -C -R -A -a
-fi
-
-# mount non-root file systems in fstab (but not NFS or SMB 
-# because TCP/IP is not yet configured, and not proc because
-# that has already been mounted):
-/sbin/mount -a -v -t nonfs,nosmbfs,noproc
-
-# Clean up some temporary files:
-( cd /var/log/setup/tmp && rm -rf * )
-/bin/rm -f /var/run/utmp /var/run/*pid /etc/nologin /var/run/lpd* \
-  /var/run/ppp* /etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot
-
-# Attempt to umount and remove any leftover /initrd:
-if [ -d /initrd ]; then
-  /sbin/umount /initrd 2> /dev/null
-  rmdir /initrd 2> /dev/null
-  blockdev --flushbufs /dev/ram0 2> /dev/null
-fi
-
-# Create a fresh utmp file:
-touch /var/run/utmp
-chown root.utmp /var/run/utmp
-chmod 664 /var/run/utmp
-
-if [ "$ROOTTYPE" = "umsdos" ]; then # we need to update any files added in DOS:
-  echo "Synchronizing UMSDOS directory structure:"
-  echo "  /sbin/umssync -r99 -v- /"
-  /sbin/umssync -r99 -v- /
-fi
-
-# Setup the /etc/motd to reflect the current kernel level:
-# THIS WIPES ANY CHANGES YOU MAKE TO /ETC/MOTD WITH EACH BOOT.
-# COMMENT THIS OUT IF YOU WANT TO MAKE A CUSTOM VERSION.
-echo "$(/bin/uname -sr)." > /etc/motd
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
-  . /etc/rc.d/rc.sysvinit
-fi
-
-# Run serial port setup script:
-# (CAREFUL! This can make some systems hang if the rc.serial script isn't
-# set up correctly. If this happens, you may have to edit the file from a
-# boot disk)
-#
-# . /etc/rc.d/rc.serial
-
-# Carry an entropy pool between reboots to improve randomness.
-if [ -f /etc/random-seed ]; then
-  echo "Using /etc/random-seed to initialize /dev/urandom."
-  cat /etc/random-seed > /dev/urandom
-fi
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-chmod 600 /etc/random-seed
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.httpd b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.httpd
deleted file mode 100644
index 00b8837..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.httpd
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.httpd
-#
-# Start/stop/restart the Apache web server.
-#
-# To make Apache start automatically at boot, make this
-# file executable:  chmod 755 /etc/rc.d/rc.httpd
-#
-
-case "$1" in
-   'start')
-      /usr/sbin/apachectl start ;;
-   'stop')
-      /usr/sbin/apachectl stop ;;
-   'restart')
-      /usr/sbin/apachectl restart ;;
-   *)
-      echo "usage $0 start|stop|restart" ;;
-esac
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inet2 b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inet2
deleted file mode 100755
index db56589..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inet2
+++ /dev/null
@@ -1,129 +0,0 @@
-#!/bin/sh
-#
-# rc.inet2	This shell script boots up the entire network system.
-#		Note, that when this script is used to also fire
-#		up any important remote NFS disks (like the /usr
-#		directory), care must be taken to actually
-#		have all the needed binaries online _now_ ...
-#
-#               Uncomment or comment out sections depending on which
-#               services your site requires.
-#
-# Author:	Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-# Modified for Slackware by Patrick Volkerding <volkerdi@slackware.com>
-
-
-# At this point, we are ready to talk to The World...
-
-
-# Mount remote (NFS) filesystems:
-if cat /etc/fstab | grep -v '^#' | grep -w nfs 1> /dev/null 2> /dev/null ; then
-  # Start the RPC portmapper if we find NFS volumes defined in /etc/fstab,
-  # since it will need to be running in order to mount them.  If portmap
-  # is not running, attempting to mount an NFS partition will cause mount
-  # to hang.  Keep this in mind if you plan to mount unlisted partitions...
-  if [ -x /etc/rc.d/rc.portmap ]; then
-    . /etc/rc.d/rc.portmap start
-  else
-    # Warn about a possible NFS problem.  It's also possible to mount NFS partitions
-    # without rpc.portmap by using '-o nolock' (not a good idea in most cases).
-    echo "WARNING:  NFS partitions found in /etc/fstab, but /etc/rc.d/rc.portmap is"
-    echo "          not executable.  If you do not run portmap, NFS partitions will"
-    echo "          not mount properly.  To start rpc.portmap at boot, change the"
-    echo "          permissions on /etc/rc.d/rc.portmap:  chmod 755 /etc/rc.d/rc.portmap"
-    sleep 10
-  fi
-  echo "Mounting remote (NFS) file systems:  /sbin/mount -a -t nfs"
-  /sbin/mount -a -t nfs      	 # This may be our /usr runtime!
-  # Show the mounted volumes:
-  /sbin/mount -v -t nfs
-fi
-
-# Load the RPC portmapper if /etc/rc.d/rc.portmap is executable.
-# This might be needed to mount NFS partitions that are not listed in /etc/fstab.
-if [ -x /etc/rc.d/rc.portmap ]; then
-  . /etc/rc.d/rc.portmap start
-fi
-
-# Mount remote (SMB) filesystems:
-if cat /etc/fstab | grep -v '^#' | grep -w smbfs 1> /dev/null 2> /dev/null ; then
-  echo "Mounting remote (SMB) file systems:  /sbin/mount -a -t smbfs"
-  /sbin/mount -a -t smbfs
-  # Show the mounted volumes:
-  /sbin/mount -v -t smbfs
-fi
-
-# Start the system logger if it is not already running (maybe because /usr
-# is on a network partition).
-if [ -x /etc/rc.d/rc.syslog -a -d /var/log -a ! -r /var/run/syslogd.pid ]; then
-  . /etc/rc.d/rc.syslog start
-fi
-
-# If there is a firewall script, run it before enabling packet forwarding.
-# See the HOWTOs on http://www.netfilter.org/ for documentation on
-# setting up a firewall or NAT on Linux.  In some cases this might need to
-# be moved past the section below dealing with IP packet forwarding.
-if [ -x /etc/rc.d/rc.firewall ]; then
-  /etc/rc.d/rc.firewall start
-fi
-
-# Turn on IPv4 packet forwarding support.
-if [ -x /etc/rc.d/rc.ip_forward ]; then
-  . /etc/rc.d/rc.ip_forward start
-fi
-
-# Start the inetd server:
-if [ -x /etc/rc.d/rc.inetd ]; then
-  /etc/rc.d/rc.inetd start
-fi
-
-# Start the OpenSSH SSH daemon:
-if [ -x /etc/rc.d/rc.sshd ]; then
-  echo "Starting OpenSSH SSH daemon: /usr/sbin/sshd"
-  /etc/rc.d/rc.sshd start
-fi
-
-# Start the BIND name server daemon:
-if [ -x /etc/rc.d/rc.bind ]; then
-  /etc/rc.d/rc.bind start
-fi
-
-# Start NIS (the Network Information Service):
-if [ -x /etc/rc.d/rc.yp ]; then
-  . /etc/rc.d/rc.yp start
-fi
-
-# Start the NFS server.   Note that for this to work correctly, you'll
-# need to load the knfsd module for kernel NFS server support.
-# You'll also need to set up some shares in /etc/exports, and be sure
-# that /etc/rc.d/rc.portmap is executable.
-# Starting the NFS server:
-if [ -x /etc/rc.d/rc.nfsd ]; then
-  /etc/rc.d/rc.nfsd start
-fi
-
-# Stuff you won't need follows.  ;-)
-
-# # Start the network routing daemon:
-# if [ -x /usr/sbin/routed ]; then
-#   echo "Starting network routing daemon:  /usr/sbin/routed"
-#   /usr/sbin/routed -g -s
-# fi
-
-# # Start the system status server:
-# if [ -x /usr/sbin/rwhod ]; then
-#   echo "Starting system status server:  /usr/sbin/rwhod"
-#   /usr/sbin/rwhod
-# fi
-
-#  # Fire up the PC-NFS daemon(s).  This is a primarily obsolete system, and may
-#  # not be very secure.  It's not at all needed for normal NFS server support.
-#  # You probably should not run this.
-#  if [ -x /usr/sbin/rpc.pcnfsd ]; then
-#    echo "Starting PC-NFS daemons:  /usr/sbin/rpc.pcnfsd /usr/sbin/rpc.bwnfsd"
-#    /usr/sbin/rpc.pcnfsd /var/spool/lpd
-#  fi
-#  if [ -x /usr/sbin/rpc.bwnfsd ]; then
-#    /usr/sbin/rpc.bwnfsd /var/spool/lpd
-#  fi
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inetd b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inetd
deleted file mode 100644
index 9fe1419..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inetd
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-# Start/stop/restart inetd, the BSD Internet super-daemon.
-
-# Start inetd:
-inetd_start() {
-  if [ -x /usr/sbin/inetd ]; then
-    echo "Starting Internet super-server daemon:  /usr/sbin/inetd"
-    /usr/sbin/inetd
-  fi
-}
-
-# Stop inetd:
-inetd_stop() {
-  killall inetd
-}
-
-# Restart inetd:
-inetd_restart() {
-  inetd_stop
-  sleep 1
-  inetd_start
-}
-
-case "$1" in
-'start')
-  inetd_start
-  ;;
-'stop')
-  inetd_stop
-  ;;
-'restart')
-  inetd_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.ip_forward b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.ip_forward
deleted file mode 100644
index 52bd2fe..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.ip_forward
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/sh
-# /etc/rc.d/rc.ip_forward:  start/stop IP packet forwarding
-#
-# If you intend to run your Linux box as a router, i.e. as a
-# computer that forwards and redistributes network packets, you
-# will need to enable IP packet forwarding in your kernel.
-#
-# To activate IP packet forwarding at boot time, make this
-# script executable:  chmod 755 /etc/rc.d/rc.ip_forward
-#
-# To disable IP packet forwarding at boot time, make this
-# script non-executable:  chmod 644 /etc/rc.d/rc.ip_forward
-
-# Start IP packet forwarding:
-ip_forward_start() {
-  if [ -f /proc/sys/net/ipv4/ip_forward ]; then
-    echo "Activating IPv4 packet forwarding."
-    echo 1 > /proc/sys/net/ipv4/ip_forward
-  fi
-  # When using IPv4 packet forwarding, you will also get the
-  # rp_filter, which automatically rejects incoming packets if the
-  # routing table entry for their source address doesn't match the
-  # network interface they're arriving on.  This has security
-  # advantages because it prevents the so-called IP spoofing,
-  # however it can pose problems if you use asymmetric routing
-  # (packets from you to a host take a different path than packets
-  # from that host to you) or if you operate a non-routing host
-  # which has several IP addresses on different interfaces.  To
-  # turn rp_filter off, uncomment the lines below:
-  #if [ -r /proc/sys/net/ipv4/conf/all/rp_filter ]; then
-  #  echo "Disabling rp_filter."
-  #  echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
-  #fi
-}
-
-# Stop IP packet forwarding:
-ip_forward_stop() {
-  if [ -f /proc/sys/net/ipv4/ip_forward ]; then
-    echo "Disabling IPv4 packet forwarding."
-    echo 0 > /proc/sys/net/ipv4/ip_forward
-  fi
-}
-
-# Restart IP packet forwarding:
-ip_forward_restart() {
-  ip_forward_stop
-  sleep 1
-  ip_forward_start
-}
-
-case "$1" in
-'start')
-  ip_forward_start
-  ;;
-'stop')
-  ip_forward_stop
-  ;;
-'restart')
-  ip_forward_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.local b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.local
deleted file mode 100755
index 3cf2076..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.local
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.local:  Local system initialization script.
-#
-# Put any local setup commands in here:
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.mysqld b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.mysqld
deleted file mode 100644
index 239e2e6..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.mysqld
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/sh
-# Start/stop/restart mysqld.
-#
-# Copyright 2003 Patrick J. Volkerding, Concord, CA
-# Copyright 2003 Slackware Linux, Inc., Concord, CA
-#
-# This program comes with NO WARRANTY, to the extent permitted by law.
-# You may redistribute copies of this program under the terms of the
-# GNU General Public License.
-
-# To start MySQL automatically at boot, be sure this script is executable:
-# chmod 755 /etc/rc.d/rc.mysqld
-
-# Before you can run MySQL, you must have a database.  To install an initial
-# database, do this as root:
-#
-#   su - mysql
-#   mysql_install_db
-#
-# Note that step one is becoming the mysql user.  It's important to do this
-# before making any changes to the database, or mysqld won't be able to write
-# to it later (this can be fixed with 'chown -R mysql.mysql /var/lib/mysql').
-
-# To disallow outside connections to the database (if you don't need them, this
-# is recommended to increase security), uncomment the next line:
-#SKIP="--skip-networking"
-
-# Start mysqld:
-mysqld_start() {
-  if [ -x /usr/bin/mysqld_safe ]; then
-    # If there is an old PID file (no mysqld running), clean it up:
-    if [ -r /var/run/mysql/mysql.pid ]; then
-      if ! ps ax | grep mysqld 1> /dev/null 2> /dev/null ; then
-        echo "Cleaning up old /var/run/mysql/mysql.pid."
-        rm -f /var/run/mysql/mysql.pid
-      fi
-    fi
-    /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid $SKIP &
-  fi
-}
-
-# Stop mysqld:
-mysqld_stop() {
-  # If there is no PID file, ignore this request...
-  if [ -r /var/run/mysql/mysql.pid ]; then
-    killall mysqld
-    # Wait at least one minute for it to exit, as we don't know how big the DB is...
-    for second in 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 \
-      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 60 ; do
-      if [ ! -r /var/run/mysql/mysql.pid ]; then
-        break;
-      fi
-      sleep 1
-    done
-    if [ "$second" = "60" ]; then
-      echo "WARNING:  Gave up waiting for mysqld to exit!"
-      sleep 15
-    fi
-  fi
-}
-
-# Restart mysqld:
-mysqld_restart() {
-  mysqld_stop
-  mysqld_start
-}
-
-case "$1" in
-'start')
-  mysqld_start
-  ;;
-'stop')
-  mysqld_stop
-  ;;
-'restart')
-  mysqld_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.postfix b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.postfix
deleted file mode 100644
index bc32367..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.postfix
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh
-#
-## Slackware init script for postfix
-##   20030828 Manolis Tzanidakis
-#
-
-postfix_start() {
-        if [ -x /usr/sbin/postfix ]; then
-                echo -n "Starting postfix MTA:  "
-                echo "/usr/sbin/postfix start"
-                /usr/sbin/postfix start 2>/dev/null
-        fi
-}
-
-postfix_stop() {
-        /usr/sbin/postfix stop 2>/dev/null
-}
-
-postfix_restart() {
-        sh $0 stop
-	sleep 1
-        sh $0 start
-}
-
-postfix_reload() {
-        /usr/sbin/postfix reload 2>/dev/null
-}
-
-case "$1" in
-        'start')
-                postfix_start
-                ;;
-        'stop')
-                postfix_stop
-                ;;
-        'restart')
-                postfix_restart
-                ;;
-        'reload')
-                postfix_reload
-                ;;
-        *)
-                echo "usage $0 start|stop|restart|reload"
-esac
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sendmail b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sendmail
deleted file mode 100644
index 1a31c52..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sendmail
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-# Start/stop/restart sendmail.
-
-# Start sendmail:
-sendmail_start() {
-  if [ -x /usr/sbin/sendmail ]; then
-    echo "Starting sendmail MTA daemon: /usr/sbin/sendmail -L sm-mta -bd -q25m"
-    /usr/sbin/sendmail -L sm-mta -bd -q25m
-    echo "Starting sendmail MSP queue runner: /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m"
-    /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m
-  fi
-}
-
-# Stop sendmail:
-sendmail_stop() {
-  killall sendmail
-}
-
-# Restart sendmail:
-sendmail_restart() {
-  sendmail_stop
-  sleep 1
-  sendmail_start
-}
-
-case "$1" in
-'start')
-  sendmail_start
-  ;;
-'stop')
-  sendmail_stop
-  ;;
-'restart')
-  sendmail_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.serial b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.serial
deleted file mode 100755
index 5f31c01..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.serial
+++ /dev/null
@@ -1,132 +0,0 @@
-#
-# /etc/rc.serial 
-#	Initializes the serial ports on your system
-#
-# chkconfig: 2345 50 75
-# description: This initializes the settings of the serial port
-#
-# FILE_VERSION: 19981128
-#
-# Distributed with setserial and the serial driver.  We need to use the
-# FILE_VERSION field to assure that we don't overwrite a newer rc.serial 
-# file with a newer one.
-# 
-# XXXX For now, the autosave feature doesn't work if you are
-# using the multiport feature; it doesn't save the multiport configuration
-# (for now).  Autosave also doesn't work for the hayes devices.  
-#
-
-RCLOCKFILE=/var/lock/subsys/serial
-DIRS="/lib/modules/`uname -r`/misc /lib/modules /usr/lib/modules ."
-PATH=/bin:/sbin:/usr/bin
-DRIVER=serial
-DRIVER_NAME=serial
-MODULE_REGEXP="serial\b"
-
-ALLDEVS="/dev/ttyS?"
-if /bin/ls /dev/ttyS?? >& /dev/null ; then
-	ALLDEVS="$ALLDEVS /dev/ttyS??"
-fi
-
-SETSERIAL=""
-if test -x /bin/setserial ; then
-	SETSERIAL=/bin/setserial
-elif test -x /sbin/setserial ; then
-	SETSERIAL=/sbin/setserial
-fi
-
-#
-# See if the serial driver is loaded
-#
-LOADED=""
-if test -f /proc/devices; then
-	if grep -q " ttyS$" /proc/devices ; then
-		LOADED="yes"
-	else
-		LOADED="no"
-	fi
-fi
-
-#
-# Find the serial driver
-#
-for i in $DIRS
-do
-	if test -z "$MODULE" -a -f $i/$DRIVER.o ; then
-		MODULE=$i/$DRIVER.o
-	fi
-done
-
-if ! test -f /proc/modules ; then
-	MODULE=""
-fi
-
-#
-# Handle System V init conventions...
-#
-case $1 in
-start)
-	action="start";
-	;;
-stop)
-	action="stop";
-	;;
-*)
-	action="start";
-esac
-
-if test $action  = stop ; then
-	if test -n ${SETSERIAL} -a "$LOADED" != "no" -a \
-           `head -1 /etc/serial.conf`X = "###AUTOSAVE###X" ; then
-		echo -n "Saving state of serial devices... "
-		grep "^#" /etc/serial.conf > /etc/.serial.conf.new
-		${SETSERIAL} -G -g ${ALLDEVS} >> /etc/.serial.conf.new
-		mv /etc/serial.conf /etc/.serial.conf.old
-		mv /etc/.serial.conf.new /etc/serial.conf
-		echo "done."
-	fi
-	if test -n "$MODULE" ; then
-		module=`grep $MODULE_REGEXP /proc/modules | awk '{print $1}'`
-		if test -z "$module" ; then 
-			echo "The $DRIVER_NAME driver is not loaded."
-			rm -f ${RCLOCKFILE}
-			exit 0
-		fi
-		if rmmod $module ; then :; else 
-			echo "The $DRIVER_NAME driver could NOT be unloaded."
-			exit 1;
-		fi
-		echo "The $DRIVER_NAME driver has been unloaded."
-	fi
-	rm -f ${RCLOCKFILE}
-	exit 0
-fi
-
-#
-# If not stop, it must be a start....
-#
-
-if test -n "$MODULE" -a "$LOADED" != "yes" ; then 
-	if insmod -f $MODULE $DRIVER_ARG ; then
-          true
-	else
-		echo "Couldn't load $DRIVER_NAME driver."
-		exit 1
-	fi
-fi
-
-if test -f /etc/serial.conf ; then
-        if test -n ${SETSERIAL} ; then
-		grep -v ^# < /etc/serial.conf | while read device args
-		do
-                    if [ ! "$device" = "" -a ! "$args" = "" ]; then
-                        ${SETSERIAL} -z $device $args
-                    fi
-		done 
-	fi
-else
-	echo "###AUTOSAVE###" > /etc/serial.conf
-fi
-
-touch ${RCLOCKFILE}
-${SETSERIAL} -bg ${ALLDEVS}
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sshd b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sshd
deleted file mode 100755
index a3707e3..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sshd
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/sh
-# Start/stop/restart the secure shell server:
-
-sshd_start() {
-  # Create host keys if needed.
-  if [ ! -r /etc/ssh/ssh_host_key ]; then
-    /usr/bin/ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N '' 
-  fi
-  if [ ! -f /etc/ssh/ssh_host_dsa_key ]; then
-    /usr/bin/ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N ''
-  fi
-  if [ ! -f /etc/ssh/ssh_host_rsa_key ]; then
-    /usr/bin/ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N ''
-  fi
-  /usr/sbin/sshd
-}
-
-sshd_stop() {
-  killall sshd
-}
-
-sshd_restart() {
-  if [ -r /var/run/sshd.pid ]; then
-    echo "WARNING: killing listener process only.  To kill every sshd process, you must"
-    echo "         use 'rc.sshd stop'.  'rc.sshd restart' kills only the parent sshd to"
-    echo "         allow an admin logged in through sshd to use 'rc.sshd restart' without"
-    echo "         being cut off.  If sshd has been upgraded, new connections will now"
-    echo "         use the new version, which should be a safe enough approach."
-    kill `cat /var/run/sshd.pid`
-  else
-    killall sshd
-  fi
-  sleep 1
-  sshd_start
-}
-
-case "$1" in
-'start')
-  sshd_start
-  ;;
-'stop')
-  sshd_stop
-  ;;
-'restart')
-  sshd_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.syslog b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.syslog
deleted file mode 100755
index a005fb7..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.syslog
+++ /dev/null
@@ -1,42 +0,0 @@
-#!/bin/sh
-# Start/stop/restart the system logging daemons.
-#
-# Written for Slackware Linux by Patrick J. Volkerding <volkerdi@slackware.com>.
-
-syslogd_start() {
-  if [ -x /usr/sbin/syslogd -a -x /usr/sbin/klogd ]; then
-    echo -n "Starting sysklogd daemons: "
-    echo -n "/usr/sbin/syslogd "
-    /usr/sbin/syslogd
-    sleep 1 # prevent syslogd/klogd race condition on SMP kernels
-    echo "/usr/sbin/klogd -c 3 -x"
-    # '-c 3' = display level 'error' or higher messages on console
-    # '-x' = turn off broken EIP translation
-    /usr/sbin/klogd -c 3 -x
-  fi
-}
-
-syslogd_stop() {
-  killall syslogd 2> /dev/null
-  killall klogd 2> /dev/null
-}
-
-syslogd_restart() {
-  syslogd_stop
-  sleep 1
-  syslogd_start
-}
-
-case "$1" in
-'start')
-  syslogd_start
-  ;;
-'stop')
-  syslogd_stop
-  ;;
-'restart')
-  syslogd_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sysvinit b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sysvinit
deleted file mode 100755
index 916e59e..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sysvinit
+++ /dev/null
@@ -1,58 +0,0 @@
-#!/bin/sh
-#
-# rc.sysvinit   This file provides basic compatibility with SystemV style
-#               startup scripts.  The SystemV style init system places 
-#               start/stop scripts for each runlevel into directories such as
-#               /etc/rc.d/rc3.d/ (for runlevel 3) instead of starting them
-#               from /etc/rc.d/rc.M.  This makes for a lot more init scripts,
-#               and a more complicated execution path to follow through if
-#               something goes wrong.  For this reason, Slackware has always
-#               used the traditional BSD style init script layout.
-#
-#               However, many binary packages exist that install SystemV
-#               init scripts.  With rc.sysvinit in place, most well-written
-#               startup scripts will work.  This is primarily intended to
-#               support commercial software, though, and probably shouldn't
-#               be considered bug free.
-#
-#               Written by Patrick Volkerding <volkerdi@slackware.com>, 1999
-#               from an example by Miquel van Smoorenburg <miquels@cistron.nl>.
-
-# Run an init script:
-startup() {
-  case "$1" in
-  *.sh)
-    sh "$@"
-    ;;
-  *)
-    "$@"
-    ;;
-  esac
-}
-
-# Set onlcr to avoid staircase effect.
-stty onlcr 0>&1
-
-if [ "$runlevel" = "" ]; then
-  runlevel=$RUNLEVEL
-  export runlevel
-  prevlevel=$PREVLEVEL
-  export prevlevel
-fi
-
-# Run kill scripts in the previous runlevel if not "none"
-if [ ! "$prevlevel" = "N" ]; then
-  for script in /etc/rc.d/rc$prevlevel.d/K* ; do
-    if [ -x $script ]; then
-      startup $script stop
-    fi
-  done
-fi
-
-# Now do the startup scripts:
-for script in /etc/rc.d/rc$runlevel.d/S* ; do
-  if [ -x $script ]; then
-    startup $script start
-  fi
-done
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rssh.conf b/templates/vserver-legacy/vserver-legacy.d/etc/rssh.conf
deleted file mode 100644
index a74acc6..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rssh.conf
+++ /dev/null
@@ -1,48 +0,0 @@
-# This is the default rssh config file
-
-# set the log facility.  "LOG_USER" and "user" are equivalent.
-logfacility = LOG_USER 
-
-# Leave these all commented out to make the default action for rssh to lock
-# users out completely...
-
-allowscp
-allowsftp
-#allowcvs
-#allowrdist
-#allowrsync
-
-# set the default umask
-umask = 022
-
-# If you want to chroot users, use this to set the directory where the root of
-# the chroot jail will be located.
-#
-# if you DO NOT want to chroot users, LEAVE THIS COMMENTED OUT.
-# You can quote anywhere, but quotes not required unless path contains a
-# space... as in this example.
-
-chrootpath = "/var/users"
-
-##########################################
-# EXAMPLES of configuring per-user options
-
-#user=rudy:077:00010:  # the path can simply be left out to not chroot
-#user=rudy:077:00010   # the ending colon is optional
-
-#spaces in the path must be quoted...
-#user=rudy:011:00001:"/usr/local/chroot dir"  # scp with chroot
-#user=rudy:011:00010:"/usr/local/chroot dir"  # sftp with chroot
-#user=rudy:011:00011:"/usr/local/chroot dir"  # both with chroot
-#user=rudy:011:00100:  # cvs, with no chroot 
-#user=rudy:011:01000:  # rdist, with no chroot
-#user=rudy:011:10000:  # rsync, with no chroot
-#user="rudy:011:00001:/usr/local/chroot"  # whole user string can be quoted
-#user=rudy:01"1:00001:/usr/local/chroot"  # or somewhere in the middle, freak!
-#user=rudy:'011:00001:/usr/local/chroot'  # single quotes too
-
-# Spaces before or after the '=' are fine, but spaces in chrootpath need
-# quotes.
-#user = "rudy:011:00001:/usr/local/chroot dir"  
-#user = "rudy:011:00001:/usr/local/chroot dir"  # neither do comments at line end
-
diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/ssh/sshd_config b/templates/vserver-legacy/vserver-legacy.d/etc/ssh/sshd_config
deleted file mode 100644
index a161fec..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/ssh/sshd_config
+++ /dev/null
@@ -1,103 +0,0 @@
-#	$OpenBSD: sshd_config,v 1.69 2004/05/23 23:59:53 dtucker Exp $
-
-# This is the sshd server system-wide configuration file.  See
-# sshd_config(5) for more information.
-
-# This sshd was compiled with PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
-
-# The strategy used for options in the default sshd_config shipped with
-# OpenSSH is to specify options with their default value where
-# possible, but leave them commented.  Uncommented options change a
-# default value.
-
-#Port 22
-#Protocol 2,1
-#ListenAddress 0.0.0.0
-#ListenAddress ::
-
-# HostKey for protocol version 1
-#HostKey /etc/ssh/ssh_host_key
-# HostKeys for protocol version 2
-#HostKey /etc/ssh/ssh_host_rsa_key
-#HostKey /etc/ssh/ssh_host_dsa_key
-
-# Lifetime and size of ephemeral version 1 server key
-#KeyRegenerationInterval 1h
-#ServerKeyBits 768
-
-# Logging
-#obsoletes QuietMode and FascistLogging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2m
-PermitRootLogin no
-#StrictModes yes
-#MaxAuthTries 6
-
-#RSAAuthentication yes
-#PubkeyAuthentication yes
-#AuthorizedKeysFile	.ssh/authorized_keys
-
-# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#RhostsRSAAuthentication no
-# similar for protocol version 2
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# RhostsRSAAuthentication and HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-#PasswordAuthentication yes
-#PermitEmptyPasswords no
-
-# Change to no to disable s/key passwords
-#ChallengeResponseAuthentication yes
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-
-# Set this to 'yes' to enable PAM authentication, account processing, 
-# and session processing. If this is enabled, PAM authentication will 
-# be allowed through the ChallengeResponseAuthentication mechanism. 
-# Depending on your PAM configuration, this may bypass the setting of 
-# PasswordAuthentication, PermitEmptyPasswords, and 
-# "PermitRootLogin without-password". If you just want the PAM account and 
-# session checks to run without PAM authentication, then enable this but set 
-# ChallengeResponseAuthentication=no
-#UsePAM no
-
-#AllowTcpForwarding yes
-#GatewayPorts no
-#X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PrintMotd yes
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#UsePrivilegeSeparation yes
-#PermitUserEnvironment no
-#Compression yes
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS yes
-#PidFile /var/run/sshd.pid
-#MaxStartups 10
-
-# no default banner path
-#Banner /some/path
-
-# override default of no subsystems
-Subsystem	sftp	/usr/libexec/sftp-server
diff --git a/templates/vserver-legacy/vserver-legacy.d/var/www/htdocs/missing.html b/templates/vserver-legacy/vserver-legacy.d/var/www/htdocs/missing.html
deleted file mode 100644
index b2eec17..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/var/www/htdocs/missing.html
+++ /dev/null
@@ -1,12 +0,0 @@
-<html>
-<head>
-<title>404 - Not Found</title>
-</head>
-<body>
-  <center>
-  <pre>
-  O endere&ccedil;o que voc&ecirc; requisitou n&atilde;o p&ocirc;de ser encontrado :(
-  </pre>
-  </center>
-</body>
-</html>
diff --git a/templates/vserver-legacy/vserver-legacy.d/var/www/missing.html b/templates/vserver-legacy/vserver-legacy.d/var/www/missing.html
deleted file mode 100644
index b2eec17..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/var/www/missing.html
+++ /dev/null
@@ -1,12 +0,0 @@
-<html>
-<head>
-<title>404 - Not Found</title>
-</head>
-<body>
-  <center>
-  <pre>
-  O endere&ccedil;o que voc&ecirc; requisitou n&atilde;o p&ocirc;de ser encontrado :(
-  </pre>
-  </center>
-</body>
-</html>
diff --git a/templates/vserver-legacy/vserver-legacy.s/GPG-KEY b/templates/vserver-legacy/vserver-legacy.s/GPG-KEY
deleted file mode 100644
index fd23e95..0000000
--- a/templates/vserver-legacy/vserver-legacy.s/GPG-KEY
+++ /dev/null
@@ -1,88 +0,0 @@
-security@slackware.com public key
-
-Type  bits/keyID    Date       User ID
-pub  1024D/40102233 2003-02-26 Slackware Linux Project <security@slackware.com>
-sub  1024g/4E523569 2003-02-26 [expires: 2012-12-21]
-
------BEGIN PGP PUBLIC KEY BLOCK-----
-Version: GnuPG v1.2.1 (GNU/Linux)
-
-mQGiBD5dIFQRBADB31WinbXdaGk/8RNkpnZclu1w3Xmd5ItACDLB2FhOhArw35EA
-MOYzxI0gRtDNWN4pn9n74q4HbFzyRWElThWRtBTYLEpImzrk7HYVCjMxjw5A0fTr
-88aiHOth5aS0vPAoq+3TYn6JDSipf2bR03G2JVwgj3Iu066pX4naivNm8wCgldHG
-F3y9vT3UPYh3QFgEUlCalt0D/3n6NopRYy0hMN6BPu+NarXwv6NQ9g0GV5FNjEEr
-igkrD/htqCyWAUl8zyCKKUFZZx4UGBRZ5guCdNzwgYH3yn3aVMhJYQ6tcSlLsj3f
-JIz4LAZ3+rI77rbn7gHHdp7CSAuV+QHv3aNanUD/KGz5SPSvF4w+5qRM4PfPNT1h
-LMV8BACzxiyX7vzeE4ZxNYvcuCtv0mvEHl9yD66NFA35RvXaO0QiRVYeoUa5JOQZ
-gwq+fIB0zgsEYDhXFkC1hM/QL4NccMRk8C09nFn4eiz4dAEnwKt4rLCJKhkLl1DW
-TSoXHe/dOXaLnFyLzB1J8hEYmUvw3SwPt//wMqDiVBLeZfFcdLQwU2xhY2t3YXJl
-IExpbnV4IFByb2plY3QgPHNlY3VyaXR5QHNsYWNrd2FyZS5jb20+iF8EExECAB8F
-Aj5dIFQFCRJ3owAECwcDAgMVAgMDFgIBAh4BAheAAAoJEGpEY8BAECIzee0An3My
-boalJ5nLePD0HCzMuf8Ix8gPAJ9lnU1wqNVGza0t89ACTurDoppQ2rkBDQQ+XSBV
-EAQA3VYlpPyRKdOKoM6t1SwNG0YgVFSvxy/eiratBf7misDBsJeH86Pf8H9OfVHO
-cqscLiC+iqvDgqeTUX9vASjlnvcoS/3H5TDPlxiifIDggqd2euNtJ8+lyXRBV6yP
-sBIA6zki9cR4zphe48hKpSsDfj7uL5sfyc2UmKKboSu3x7cAAwUD/1jmoLQs9bIt
-bTosoy+5+Uzrl0ShRlv+iZV8RPzAMFuRJNxUJkUmmThowtXRaPKFI9AVd+pP44aA
-J+zxCPtS2isiW20AxubJoBPpXcVatJWi4sG+TM5Z5VRoLg7tIDNVWsyHGXPAhIG2
-Y8Z1kyWwb4P8A/W2b1ZCqS7Fx4yEhTikiEwEGBECAAwFAj5dIFUFCRJ3owAACgkQ
-akRjwEAQIjM1uwCdE7V4mPCqdby/nV699NxKX0iW/OsAniaVhEip8Ptff74Sv4JV
-tb+Sth2l
-=H5uu
------END PGP PUBLIC KEY BLOCK-----
-
-slamd64 public key
-
------BEGIN PGP PUBLIC KEY BLOCK-----
-Version: GnuPG v1.2.6 (GNU/Linux)
-
-mQGiBELKSBYRBACiElxGMXqxUwdsQBKPngV6/k0Q5AYT34+WLL0B7XRR9kOotCfc
-PTLCP5qLM9etpzKhbMbgWGpaBrA/3KEPOJ7JVhk6JcLgjoi0QsMusaI4BGnmrxkw
-3mh9xPwc+jPgiYOljbZhNG6FMQtrdlKYV+BmwS8mt/YBymShghtlgdHJjwCg/PAG
-YJDsfoG1ebuwcjYlsGoD2x0EAJX7UnTdxxESvmIuk172MunZqw+o8+o/W684z13/
-wOkcVqvuAcd0ejuY0z09GFfyhtig8E55UcKNyVC50+3aJUXlt9//HnENHZo+OEN1
-ezbOXUcJIw8xkU551qaxubqWXtKYEJP9z/khVPe4N0JW2vWOcAFYhuOEx1ylaNrX
-gUY4BACDpn+pntq0ooZqkSPT4v1ibOQg/3xh2F1PgsnOahMRrXbVEdL9ItsVnHM/
-ygHBjLhkEMd612nVVSw1BYMBAwQbsYB8Lgn1QxXl0ISBYR1RYW1LvyaJM6A6TDL+
-EdWp+iTtlKOe/VD+oCfHmMONoucZJM2AtK1vXTX3x4Wb4MgVdLQoRnJlZGVyaWNr
-IEVtbW90dCA8bWFpbEBmcmVkZW1tb3R0LmNvLnVrPohkBBMRAgAkBQJCykgWAhsD
-BQkDwmcABgsJCAcDAgMVAgMDFgIBAh4BAheAAAoJEAd5Da1T/acLGfIAoOqIHrg4
-r2pq/tKi9VifOJS1xg4LAKDpi0I0pzsdDJ2owxCQ88MkoSDKgohMBBARAgAMBQJD
-Ed/tBYMDes8pAAoJEFgpV1AFAIOLprQAnRDVVmDPnzVNOWrZ8D55gG2bOwkxAKCl
-dGThnu0aQ0IEL7MgUETGtk4hS4iiBBABAgAMBQJDEdpDBYMDetTTAAoJEJugaRW/
-hasxqCwEAKczPTgOrRXXTs4piB14DayJQVgoqVgiNfKzd5qVuvQgYebQrMu7hi5U
-0q/n6TbQpjmMDZKxhXhEY1gs32mtzKKDrerTpF+pJAgQVvBLZS2mF4HbVnU74GvL
-2UKJtEtgb9u+i1Efd4Q8GIJUzLLJifURQWTk1e3B9qGApKXpWJlviEwEEBECAAwF
-AkMR75MFgwN6v4MACgkQTqjEwhXvPN1j7gCbBXZs9MM6YXGI/yTlEhiXyTECxm8A
-nj6O1XszSa5kaD7CvnRFzNkm5O5MiEwEEBECAAwFAkMR79UFgwN6v0EACgkQoLYC
-8AehV8eLBQCgv8WEdBtFjTh3Wl06WK5dKCw0nHsAn0IIHRbJC5jO4NWrIpupBMnz
-3fBsiEwEExECAAwFAkMR9ggFgwN6uQ4ACgkQR+ny47i1wzAfZQCfRACyfYBxs+tu
-6OzpLP2DGjEaa1UAnj4MVMH32f/34oN6o9dPKPT8HXWziEwEExECAAwFAkMR9vcF
-gwN6uB8ACgkQB0u7y43syeIaogCfVy7lqRjRDbttJs1u1g3FekdbJ1kAnRo726tA
-u8Xf+JWD3OrmMo0Uup3giEwEEBECAAwFAkMR+qgFgwN6tG4ACgkQfWXW5We1ioQk
-tgCePGa3NpcfEWb8drmO95Mp1C+FaBIAoNEqA89xUvTIpqooucTzFxgAupVgiEwE
-EBECAAwFAkMSF+UFgwN6lzEACgkQ/lREvmcCFhscDQCgnMxf4Nmu3B41GWupTWxb
-9b+te5sAoIiTZHzOSKtqN4cJ2i22iP/vZPt4iEwEEBECAAwFAkMULeAFgwN4gTYA
-CgkQsxZ93p+gHn6bcACgwY/5ZpvvEK+eycM5XNQhVI6w4j8An0JoXlFaGStIzUmW
-42obaW6CG4WViEYEExECAAYFAkMUZuAACgkQGnR+RTDgudhG1QCeJelEhnX/3JeW
-S5BaM7640suSeLQAnA2RDMH4zIJLI4MWEXBAvaA0lSr7iEwEEBECAAwFAkMUP8gF
-gwN4b04ACgkQM/XwBW70U1iAOwCgmah/GnZikIhyeFr6KsKpsmZCQTQAn3Vs7JZm
-w4qBLiI+RXxw7vIJlI4AiEwEEBECAAwFAkMUZ9EFgwN4R0UACgkQ72KcVAmwbhAC
-FACgiNqao9mzAWZBjIY7iiqz34gbK/QAn34F1bLAb0sHKiSUcFkVi/uZ8R0viEwE
-EBECAAwFAkMWFj8FgwN2mNcACgkQn3j4POjENGF+UgCeM+mEKW5+MjNN17QCAvZi
-cBVJEHMAn14YyvdSIwBBFUNPWYOw7GwYyAhHiEwEEBECAAwFAkMXW0cFgwN1U88A
-CgkQTxqZjtpq5iG4PwCfe2ymOYh5t+bEZGGCtJg3sWJ5hHYAmQGS+jGWcTMlXSe+
-65o/aPfLUkMQuQINBELKSCgQCADjG+pX7C0sRIkX1QQ6lFW3IrajWypXtd4jO1TA
-dlLFES7OxF202V15+TRtL9NO34x7u6RPTnF7wi/i2U1dqM9ZjrFcTJA17Y7+OLH+
-yw64/5OJapUi48qI7hnLRTPykz0c+b92pUt1X/BIWmf301jbZ0AbFZV4yvm1OUH4
-wrGLLFeATjiBWTcJarRiR89DzQ/Cm+c791WXdIhEvv5Vp4/d8HzGZhEUVKTCoA3e
-Z8ZIdJoy/d7FYfyeg836UDXEqr598n2p9DxMwkRj5oHINB64CrQuKr7zDdP8Zv2g
-vKkjeS4mN+07saWK3UTY5ADByNVHSu+P0LZYPhxjze7KOVjHAAUTCACa5ohR/7/N
-x2M2OB9VPAwQPjAFNst6fPotcFLDy5Q/jlbBcDNf1OdzgkE/06z7iPGRmIJL6flz
-QZH+hYwDqjulVVtPQXiZMVGvlfC9YIAdJX/1Ca2L9mL4c4IBQbFNkSlgkLaPTwUJ
-BD2PnA+q+ERy39UANhIR/LVGltK1krDds8CwbxMSYNFvFgf4dmh6GzI5ioByDoTM
-8ShfS2GjAekviNVLsGC5UWKuQl/XVaC/j7CTAT7WbikfXWI2uonFBx47vjf2UaPa
-E0HnAVwDY0cAZeaObpDKvyogsf8H4CzK9JCKtW9aTUpKurEpyHfcKqB07GMLC/+Q
-QiA3bFmrSaTRiE8EGBECAA8FAkLKSCgCGwwFCQPCZwAACgkQB3kNrVP9pwsejwCg
-gaQm6lU/H7ja0EUaJJFZnRoqRvAAnRK8CC4PIr/ZYDjd+aeS3R31FjGr
-=D1wm
------END PGP PUBLIC KEY BLOCK-----
diff --git a/templates/vserver-legacy/vserver-legacy.s/devices.tar.gz b/templates/vserver-legacy/vserver-legacy.s/devices.tar.gz
deleted file mode 100644
index 992ba79..0000000
--- a/templates/vserver-legacy/vserver-legacy.s/devices.tar.gz
+++ /dev/null
diff --git a/templates/vserver-legacy/vserver-legacy.s/skel.conf b/templates/vserver-legacy/vserver-legacy.s/skel.conf
deleted file mode 100644
index 73985d3..0000000
--- a/templates/vserver-legacy/vserver-legacy.s/skel.conf
+++ /dev/null
@@ -1,70 +0,0 @@
-if [ "" = "" ] ; then
-PROFILE=prod
-fi
-# Select the IP number assigned to the virtual server
-# This IP must be one IP of the server, either an interface
-# or an IP alias
-# A vserver may have more than one IP. Separate them with spaces.
-# do not forget double quotes.
-# Some examples:
-# IPROOT="1.2.3.4 2.3.4.5"
-# IPROOT="eth0:1.2.3.4 eth1:2.3.4.5"
-# If the device is not specified, IPROOTDEV is used
-case $PROFILE in
-prod)
-#IPROOT=143.106.35.156
-IPROOT="eth0:192.168.0.1"
-# The netmask and broadcast are computed by default from IPROOTDEV
-#IPROOTMASK=
-#IPROOTBCAST=
-# You can define on which device the IP alias will be done
-# The IP alias will be set when the server is started and unset
-# when the server is stopped
-#IPROOTDEV=eth0
-# You can set a different host name for the vserver
-# If empty, the host name of the main server is used
-S_HOSTNAME=skel
-;;
-backup)
-IPROOT=1.2.3.4
-#IPROOTMASK=
-#IPROOTBCAST=
-#IPROOTDEV=eth0
-S_HOSTNAME=
-;;
-esac
-# Uncomment the onboot line if you want to enable this
-# virtual server at boot time
-#ONBOOT=yes
-# You can set a different NIS domain for the vserver
-# If empty, the current on is kept
-# Set it to "none" to have no NIS domain set
-S_DOMAINNAME=
-# You can set the priority level (nice) of all process in the vserver
-# Even root won't be able to raise it
-S_NICE=
-# You can set various flags for the new security context
-# lock: Prevent the vserver from setting new security context
-# sched: Merge scheduler priority of all processes in the vserver
-#        so that it acts a like a single one.
-# nproc: Limit the number of processes in the vserver according to ulimit
-#        (instead of a per user limit, this becomes a per vserver limit)
-# private: No other process can join this security context. Even root
-# Do not forget the quotes around the flags
-S_FLAGS="lock nproc"
-# You can set various ulimit flags and they will be inherited by the
-# vserver. You enter here various command line argument of ulimit
-# ULIMIT="-HS -u 200"
-# The example above, combined with the nproc S_FLAGS will limit the
-# vserver to a maximum of 200 processes
-ULIMIT="-HS -u 1000"
-# You can set various capabilities. By default, the vserver are run
-# with a limited set, so you can let root run in a vserver and not
-# worry about it. He can't take over the machine. In some cases
-# you can to give a little more capabilities (such as CAP_NET_RAW)
-# S_CAPS="CAP_NET_RAW"
-S_CAPS="CAP_SETGID"
-# Select an unused context (this is optional)
-# The default is to allocate a free context on the fly
-# In general you don't need to force a context
-#S_CONTEXT=
diff --git a/templates/vserver-legacy/vserver-legacy.s/vserver-legacy.sh b/templates/vserver-legacy/vserver-legacy.s/vserver-legacy.sh
deleted file mode 100644
index 4ce8a4b..0000000
--- a/templates/vserver-legacy/vserver-legacy.s/vserver-legacy.sh
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/bash
-#
-# legacy vserver template
-#
-
-BASE="/etc/simplepkg/templates/vserver-legacy/vserver-legacy.s/"
-DEVICES="$BASE/devices.tar.gz"
-GPGKEY="$BASE/GPG-KEY"
-SKEL="$BASE/skel.conf"
-
-if [ -z "$2" ]; then
-  echo "usage: `basename $0` <jail-root> <jail-name>"
-  exit 1
-elif [ ! -d "$1/$2" ]; then
-  echo "folder $1/$2 does not exist"
-  exit 1
-fi
-
-cp /etc/resolv.conf $1/$2/etc/
-cp /etc/localtime $1/$2/etc/
-echo /dev/hdv1 / ext2 defaults 1 1 > $1/$2/etc/fstab                                                           
-echo /dev/hdv1 / ext2 rw 0 0 > $1/$2/etc/mtab                                                                  
-
-echo "creating devices and dependencies"
-if [ -f "$DEVICES" ]; then
-  cd $1/$2/
-  tar zxvf $DEVICES
-  chroot $1/$2/ sbin/ldconfig
-else
-  echo error: device template $DEVICES not found
-fi
-
-if [ -f "$SKEL" ]; then
-  echo "creating /etc/vservers/$2.conf"
-  mkdir -p /etc/vservers
-  cp $SKEL /etc/vservers/$2.conf
-else
-  echo error: config file template $SKEL not found
-fi
-
-if [ -f "$GPGKEY" ]; then
-  echo "importing slack gpg pubkey"                                                                                  
-  mkdir $1/$2/root/.gnupg                                                                                        
-  gpg --homedir $1/$2/root/.gnupg --import $GPGKEY
-fi
-
-echo "done; now edit /etc/vservers/$2.conf"
-echo "then, set all desired iptables rules and start $server vserver"
-echo "dont forget to change root's password with the command "vserver $2 exec passwd"" 
diff --git a/templates/vserver-legacy/vserver-legacy.template b/templates/vserver-legacy/vserver-legacy.template
deleted file mode 100644
index b810e32..0000000
--- a/templates/vserver-legacy/vserver-legacy.template
+++ /dev/null
@@ -1,251 +0,0 @@
-# This is a Slackware Installation Tagfile.
-# 
-# This one comes from disk: A1 (Base Linux series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-aaa_base: ADD
-aaa_elflibs: ADD
-bash: ADD
-bin: ADD
-bzip2: ADD
-coreutils: ADD
-cxxlibs: ADD
-dcron: ADD
-elvis: ADD
-etc: ADD
-findutils: ADD
-gawk: ADD
-gettext: REC
-grep: ADD
-gzip: ADD
-infozip: ADD
-less: ADD
-logrotate: ADD
-openssl-solibs: ADD
-pkgtools: ADD
-procps: ADD
-sed: ADD
-shadow: ADD
-slocate: ADD
-sysklogd: ADD
-sysvinit: ADD
-tar: ADD
-util-linux: ADD
-# This is a Slackware Installation Tagfile.
-#           
-# This one comes from disk: AP1 (Applications series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-bc: OPT
-diffutils: REC
-jed: OPT
-joe: OPT
-jove: OPT
-lsof: OPT
-mysql: OPT
-sudo: OPT
-vim: OPT
-# Tagfile for emacs series
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: F1 (Frequently Asked Questions)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-libidn: REC
-libxml2: REC
-mhash: REC
-# This is a Slackware Installation Tagfile.
-#           
-# This one comes from the N (Network/UUCP/Mail/News) series.
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-# 
-#
-apache: OPT
-curl: OPT
-gnupg: OPT
-htdig: OPT
-inetd: REC
-lftp: OPT
-lynx: OPT
-mod_ssl: OPT
-nail: REC
-openssh: REC
-openssl: REC
-php: OPT
-rsync: OPT
-stunnel: OPT
-tcpip: REC
-wget: OPT
-# This is a Slackware Installation Tagfile.
-#           
-# This one comes from disk: TCL1 (Tcl/Tk series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: Y1 (Yaaaaaahhoooo? Games and Amusements).
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-# extra
-libsafe
-# contrib
-simplepkg
-ssmtp
diff --git a/templates/vserver/vserver.d/etc/apache/httpd.conf b/templates/vserver/vserver.d/etc/apache/httpd.conf
deleted file mode 100644
index 7b7115d..0000000
--- a/templates/vserver/vserver.d/etc/apache/httpd.conf
+++ /dev/null
@@ -1,1046 +0,0 @@
-##
-## httpd.conf -- Apache HTTP server configuration file
-##
-
-#
-# Based upon the NCSA server configuration files originally by Rob McCool.
-#
-# This is the main Apache server configuration file.  It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs/> for detailed information about
-# the directives.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do.  They're here only as hints or reminders.  If you are unsure
-# consult the online docs. You have been warned.  
-#
-# After this file is processed, the server will look for and process
-# /etc/apache/srm.conf and then /etc/apache/access.conf
-# unless you have overridden these with ResourceConfig and/or
-# AccessConfig directives here.
-#
-# The configuration directives are grouped into three basic sections:
-#  1. Directives that control the operation of the Apache server process as a
-#     whole (the 'global environment').
-#  2. Directives that define the parameters of the 'main' or 'default' server,
-#     which responds to requests that aren't handled by a virtual host.
-#     These directives also provide default values for the settings
-#     of all virtual hosts.
-#  3. Settings for virtual hosts, which allow Web requests to be sent to
-#     different IP addresses or hostnames and have them handled by the
-#     same Apache server process.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path.  If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
-# with ServerRoot set to "/usr/local/apache" will be interpreted by the
-# server as "/usr/local/apache/logs/foo.log".
-#
-
-### Section 1: Global Environment
-#
-# The directives in this section affect the overall operation of Apache,
-# such as the number of concurrent requests it can handle or where it
-# can find its configuration files.
-#
-
-#
-# ServerType is either inetd, or standalone.  Inetd mode is only supported on
-# Unix platforms.
-#
-ServerType standalone
-
-# ServerTokens directive
-ServerTokens ProductOnly
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# NOTE!  If you intend to place this on an NFS (or otherwise network)
-# mounted filesystem then please read the LockFile documentation
-# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
-# you will save yourself a lot of trouble.
-#
-ServerRoot "/usr"
-
-#
-# The LockFile directive sets the path to the lockfile used when Apache
-# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
-# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
-# its default value. The main reason for changing it is if the logs
-# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
-# DISK. The PID of the main server process is automatically appended to
-# the filename. 
-#
-#LockFile /var/run/httpd.lock
-
-#
-# PidFile: The file in which the server should record its process
-# identification number when it starts.
-#
-PidFile /var/run/httpd.pid
-
-#
-# ScoreBoardFile: File used to store internal server process information.
-# Not all architectures require this.  But if yours does (you'll know because
-# this file will be  created when you run Apache) then you *must* ensure that
-# no two invocations of Apache share the same scoreboard file.
-#
-ScoreBoardFile /var/run/httpd.scoreboard
-
-#
-# In the standard configuration, the server will process httpd.conf (this 
-# file, specified by the -f command line option), srm.conf, and access.conf 
-# in that order.  The latter two files are now distributed empty, as it is 
-# recommended that all directives be kept in a single file for simplicity.  
-# The commented-out values below are the built-in defaults.  You can have the 
-# server ignore these files altogether by using "/dev/null" (for Unix) or
-# "nul" (for Win32) for the arguments to the directives.
-#
-#ResourceConfig /etc/apache/srm.conf
-#AccessConfig /etc/apache/access.conf
-
-#
-# Timeout: The number of seconds before receives and sends time out.
-#
-Timeout 300
-
-#
-# KeepAlive: Whether or not to allow persistent connections (more than
-# one request per connection). Set to "Off" to deactivate.
-#
-KeepAlive On
-
-#
-# MaxKeepAliveRequests: The maximum number of requests to allow
-# during a persistent connection. Set to 0 to allow an unlimited amount.
-# We recommend you leave this number high, for maximum performance.
-#
-MaxKeepAliveRequests 100
-
-#
-# KeepAliveTimeout: Number of seconds to wait for the next request from the
-# same client on the same connection.
-#
-KeepAliveTimeout 2
-
-#
-# Server-pool size regulation.  Rather than making you guess how many
-# server processes you need, Apache dynamically adapts to the load it
-# sees --- that is, it tries to maintain enough server processes to
-# handle the current load, plus a few spare servers to handle transient
-# load spikes (e.g., multiple simultaneous requests from a single
-# Netscape browser).
-#
-# It does this by periodically checking how many servers are waiting
-# for a request.  If there are fewer than MinSpareServers, it creates
-# a new spare.  If there are more than MaxSpareServers, some of the
-# spares die off.  The default values are probably OK for most sites.
-#
-MinSpareServers 5
-MaxSpareServers 10
-
-#
-# Number of servers to start initially --- should be a reasonable ballpark
-# figure.
-#
-StartServers 5
-
-#
-# Limit on total number of servers running, i.e., limit on the number
-# of clients who can simultaneously connect --- if this limit is ever
-# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
-# It is intended mainly as a brake to keep a runaway server from taking
-# the system with it as it spirals down...
-#
-MaxClients 150
-
-#
-# MaxRequestsPerChild: the number of requests each child process is
-# allowed to process before the child dies.  The child will exit so
-# as to avoid problems after prolonged use when Apache (and maybe the
-# libraries it uses) leak memory or other resources.  On most systems, this
-# isn't really needed, but a few (such as Solaris) do have notable leaks
-# in the libraries. For these platforms, set to something like 10000
-# or so; a setting of 0 means unlimited.
-#
-# NOTE: This value does not include keepalive requests after the initial
-#       request per connection. For example, if a child process handles
-#       an initial request and 10 subsequent "keptalive" requests, it
-#       would only count as 1 request towards this limit.
-#
-MaxRequestsPerChild 0
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, instead of the default. See also the <VirtualHost>
-# directive.
-#
-#Listen 3000
-#Listen 12.34.56.78:80
-
-#
-# BindAddress: You can support virtual hosts with this option. This directive
-# is used to tell the server which IP address to listen to. It can either
-# contain "*", an IP address, or a fully qualified Internet domain name.
-# See also the <VirtualHost> and Listen directives.
-#
-#BindAddress *
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Please read the file http://httpd.apache.org/docs/dso.html for more
-# details about the DSO mechanism and run `httpd -l' for the list of already
-# built-in (statically linked and thus always available) modules in your httpd
-# binary.
-#
-# Note: The order in which modules are loaded is important.  Don't change
-# the order below without expert advice.
-#
-# Example:
-# LoadModule foo_module libexec/mod_foo.so
-LoadModule vhost_alias_module libexec/apache/mod_vhost_alias.so
-#LoadModule env_module         libexec/apache/mod_env.so
-LoadModule define_module      libexec/apache/mod_define.so
-LoadModule config_log_module  libexec/apache/mod_log_config.so
-LoadModule mime_magic_module  libexec/apache/mod_mime_magic.so
-LoadModule mime_module        libexec/apache/mod_mime.so
-LoadModule negotiation_module libexec/apache/mod_negotiation.so
-#LoadModule status_module      libexec/apache/mod_status.so
-#LoadModule info_module        libexec/apache/mod_info.so
-LoadModule includes_module    libexec/apache/mod_include.so
-LoadModule autoindex_module   libexec/apache/mod_autoindex.so
-LoadModule dir_module         libexec/apache/mod_dir.so
-LoadModule cgi_module         libexec/apache/mod_cgi.so
-#LoadModule asis_module        libexec/apache/mod_asis.so
-#LoadModule imap_module        libexec/apache/mod_imap.so
-#LoadModule action_module      libexec/apache/mod_actions.so
-#LoadModule speling_module     libexec/apache/mod_speling.so
-#LoadModule userdir_module     libexec/apache/mod_userdir.so
-LoadModule alias_module       libexec/apache/mod_alias.so
-LoadModule rewrite_module     libexec/apache/mod_rewrite.so
-LoadModule access_module      libexec/apache/mod_access.so
-LoadModule auth_module        libexec/apache/mod_auth.so
-LoadModule anon_auth_module   libexec/apache/mod_auth_anon.so
-#LoadModule dbm_auth_module    libexec/apache/mod_auth_dbm.so
-#LoadModule digest_module      libexec/apache/mod_digest.so
-LoadModule proxy_module       libexec/apache/libproxy.so
-LoadModule cern_meta_module   libexec/apache/mod_cern_meta.so
-LoadModule expires_module     libexec/apache/mod_expires.so
-LoadModule headers_module     libexec/apache/mod_headers.so
-#LoadModule usertrack_module   libexec/apache/mod_usertrack.so
-#LoadModule log_forensic_module libexec/apache/mod_log_forensic.so
-#LoadModule unique_id_module   libexec/apache/mod_unique_id.so
-LoadModule setenvif_module    libexec/apache/mod_setenvif.so
-
-#  Reconstruction of the complete module list from all available modules
-#  (static and shared ones) to achieve correct module execution order.
-#  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
-ClearModuleList
-AddModule mod_vhost_alias.c
-#AddModule mod_env.c
-AddModule mod_define.c
-AddModule mod_log_config.c
-AddModule mod_mime_magic.c
-AddModule mod_mime.c
-AddModule mod_negotiation.c
-#AddModule mod_status.c
-#AddModule mod_info.c
-AddModule mod_include.c
-AddModule mod_autoindex.c
-AddModule mod_dir.c
-AddModule mod_cgi.c
-#AddModule mod_asis.c
-#AddModule mod_imap.c
-#AddModule mod_actions.c
-#AddModule mod_speling.c
-#AddModule mod_userdir.c
-AddModule mod_alias.c
-AddModule mod_rewrite.c
-AddModule mod_access.c
-AddModule mod_auth.c
-AddModule mod_auth_anon.c
-#AddModule mod_auth_dbm.c
-#AddModule mod_digest.c
-AddModule mod_proxy.c
-AddModule mod_cern_meta.c
-AddModule mod_expires.c
-AddModule mod_headers.c
-#AddModule mod_usertrack.c
-#AddModule mod_log_forensic.c
-#AddModule mod_unique_id.c
-AddModule mod_so.c
-AddModule mod_setenvif.c
-
-#
-# ExtendedStatus controls whether Apache will generate "full" status
-# information (ExtendedStatus On) or just basic information (ExtendedStatus
-# Off) when the "server-status" handler is called. The default is Off.
-#
-#ExtendedStatus On
-
-### Section 2: 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition.  These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-#
-# If your ServerType directive (set earlier in the 'Global Environment'
-# section) is set to "inetd", the next few directives don't have any
-# effect since their settings are defined by the inetd configuration.
-# Skip ahead to the ServerAdmin directive.
-#
-
-#
-# Port: The port to which the standalone server listens. For
-# ports < 1023, you will need httpd to be run as root initially.
-#
-Port 80
-
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.  
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
-#  . On HPUX you may not be able to use shared memory as nobody, and the
-#    suggested workaround is to create a user www and use that user.
-#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
-#  when the value of (unsigned)Group is above 60000; 
-#  don't use Group "#-1" on these systems!
-#
-User nobody
-Group nobody
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed.  This address appears on some server-generated pages, such
-# as error documents.
-#
-ServerAdmin root@midas.slackware.lan
-
-#
-# ServerName allows you to set a host name which is sent back to clients for
-# your server if it's different than the one the program would get (i.e., use
-# "www" instead of the host's real name).
-#
-# Note: You cannot just invent host names and hope they work. The name you 
-# define here must be a valid DNS name for your host. If you don't understand
-# this, ask your network administrator.
-# If your host doesn't have a registered DNS name, enter its IP address here.
-# You will have to access it by its address (e.g., http://123.45.67.89/)
-# anyway, and this will make redirections work in a sensible way.
-#
-# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your 
-# machine always knows itself by this address. If you use Apache strictly for 
-# local testing and development, you may use 127.0.0.1 as the server name.
-#
-#ServerName www.example.com
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/var/www/htdocs"
-
-#
-# Each directory to which Apache has access, can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories). 
-#
-# First, we configure the "default" to be a very restrictive set of 
-# permissions.  
-#
-<Directory />
-    Options FollowSymLinks
-    AllowOverride None
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory "/var/www/htdocs">
-
-#
-# This may also be "None", "All", or any combination of "Indexes",
-# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
-#
-# Note that "MultiViews" must be named *explicitly* --- "Options All"
-# doesn't give it to you.
-#
-    Options Indexes FollowSymLinks MultiViews
-
-#
-# This controls which options the .htaccess files in directories can
-# override. Can also be "All", or any combination of "Options", "FileInfo", 
-# "AuthConfig", and "Limit"
-#
-    AllowOverride None
-
-#
-# Controls who can get stuff from this server.
-#
-    Order allow,deny
-    Allow from all
-</Directory>
-
-#
-# UserDir: The name of the directory which is appended onto a user's home
-# directory if a ~user request is received.
-#
-<IfModule mod_userdir.c>
-    UserDir public_html
-</IfModule>
-
-#
-# Control access to UserDir directories.  The following is an example
-# for a site where these directories are restricted to read-only.
-#
-#<Directory /home/*/public_html>
-#    AllowOverride FileInfo AuthConfig Limit
-#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
-#    <Limit GET POST OPTIONS PROPFIND>
-#        Order allow,deny
-#        Allow from all
-#    </Limit>
-#    <LimitExcept GET POST OPTIONS PROPFIND>
-#        Order deny,allow
-#        Deny from all
-#    </LimitExcept>
-#</Directory>
-
-#
-# DirectoryIndex: Name of the file or files to use as a pre-written HTML
-# directory index.  Separate multiple entries with spaces.
-#
-<IfModule mod_dir.c>
-    DirectoryIndex index.html
-</IfModule>
-
-#
-# AccessFileName: The name of the file to look for in each directory
-# for access control information.
-#
-AccessFileName .htaccess
-
-#
-# The following lines prevent .htaccess files from being viewed by
-# Web clients.  Since .htaccess files often contain authorization
-# information, access is disallowed for security reasons.  Comment
-# these lines out if you want Web visitors to see the contents of
-# .htaccess files.  If you change the AccessFileName directive above,
-# be sure to make the corresponding changes here.
-#
-# Also, folks tend to use names such as .htpasswd for password
-# files, so this will protect those as well.
-#
-<Files ~ "^\.ht">
-    Order allow,deny
-    Deny from all
-    Satisfy All
-</Files>
-
-#
-# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
-# document that was negotiated on the basis of content. This asks proxy
-# servers not to cache the document. Uncommenting the following line disables
-# this behavior, and proxies will be allowed to cache the documents.
-#
-#CacheNegotiatedDocs
-
-#
-# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
-# Apache needs to construct a self-referencing URL (a URL that refers back
-# to the server the response is coming from) it will use ServerName and
-# Port to form a "canonical" name.  With this setting off, Apache will
-# use the hostname:port that the client supplied, when possible.  This
-# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
-#
-UseCanonicalName On
-
-#
-# TypesConfig describes where the mime.types file (or equivalent) is
-# to be found.
-#
-<IfModule mod_mime.c>
-    TypesConfig /etc/apache/mime.types
-</IfModule>
-
-#
-# DefaultType is the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value.  If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
-DefaultType text/plain
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type.  The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-# mod_mime_magic is not part of the default server (you have to add
-# it yourself with a LoadModule [see the DSO paragraph in the 'Global
-# Environment' section], or recompile the server and include mod_mime_magic
-# as part of the configuration), so it's enclosed in an <IfModule> container.
-# This means that the MIMEMagicFile directive will only be processed if the
-# module is part of the server.
-#
-<IfModule mod_mime_magic.c>
-    MIMEMagicFile /etc/apache/magic
-</IfModule>
-
-#
-# HostnameLookups: Log the names of clients or just their IP addresses
-# e.g., www.apache.org (on) or 204.62.129.132 (off).
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on, since enabling it means that
-# each client request will result in AT LEAST one lookup request to the
-# nameserver.
-#
-HostnameLookups Off
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here.  If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog "| /usr/bin/error-log.sh /var/log/apache/error_log"
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-#
-# The following directives define some format nicknames for use with
-# a CustomLog directive (see below).
-#
-LogFormat "%l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
-LogFormat "%l %u %t \"%r\" %>s %b" common
-LogFormat "%{Referer}i -> %U" referer
-LogFormat "%{User-agent}i" agent
-
-#
-# The location and format of the access logfile (Common Logfile Format).
-# If you do not define any access logfiles within a <VirtualHost>
-# container, they will be logged here.  Contrariwise, if you *do*
-# define per-<VirtualHost> access logfiles, transactions will be
-# logged therein and *not* in this file.
-#
-CustomLog /var/log/apache/access_log common
-
-#
-# If you would like to have agent and referer logfiles, uncomment the
-# following directives.
-#
-#CustomLog /var/log/apache/referer_log referer
-#CustomLog /var/log/apache/agent_log agent
-
-#
-# If you prefer a single logfile with access, agent, and referer information
-# (Combined Logfile Format) you can use the following directive.
-#
-#CustomLog /var/log/apache/access_log combined
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (error documents, FTP directory listings,
-# mod_status and mod_info output etc., but not CGI generated documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#
-ServerSignature Off
-
-# EBCDIC configuration:
-# (only for mainframes using the EBCDIC codeset, currently one of:
-# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
-# The following default configuration assumes that "text files"
-# are stored in EBCDIC (so that you can operate on them using the
-# normal POSIX tools like grep and sort) while "binary files" are
-# stored with identical octets as on an ASCII machine.
-#
-# The directives are evaluated in configuration file order, with
-# the EBCDICConvert directives applied before EBCDICConvertByType.
-#
-# If you want to have ASCII HTML documents and EBCDIC HTML documents
-# at the same time, you can use the file extension to force
-# conversion off for the ASCII documents:
-# > AddType       text/html .ahtml
-# > EBCDICConvert Off=InOut .ahtml
-#
-# EBCDICConvertByType  On=InOut text/* message/* multipart/*
-# EBCDICConvertByType  On=In    application/x-www-form-urlencoded
-# EBCDICConvertByType  On=InOut application/postscript model/vrml
-# EBCDICConvertByType Off=InOut */*
-
-
-#
-# Aliases: Add here as many aliases as you need (with no limit). The format is 
-# Alias fakename realname
-#
-<IfModule mod_alias.c>
-
-    #
-    # Note that if you include a trailing / on fakename then the server will
-    # require it to be present in the URL.  So "/icons" isn't aliased in this
-    # example, only "/icons/".  If the fakename is slash-terminated, then the 
-    # realname must also be slash terminated, and if the fakename omits the 
-    # trailing slash, the realname must also omit it.
-    #
-    Alias /icons/ "/var/www/icons/"
-
-    <Directory "/var/www/icons">
-        Options Indexes MultiViews
-        AllowOverride None
-        Order allow,deny
-        Allow from all
-    </Directory>
-
-    # This Alias will project the on-line documentation tree under /manual/
-    # even if you change the DocumentRoot. Comment it if you don't want to 
-    # provide access to the on-line documentation.
-    #
-    Alias /manual/ "/var/www/htdocs/manual/"
-
-    <Directory "/var/www/htdocs/manual">
-        Options Indexes FollowSymlinks MultiViews
-        AllowOverride None
-        Order allow,deny
-        Allow from all
-    </Directory>
-
-    #
-    # ScriptAlias: This controls which directories contain server scripts.
-    # ScriptAliases are essentially the same as Aliases, except that
-    # documents in the realname directory are treated as applications and
-    # run by the server when requested rather than as documents sent to the client.
-    # The same rules about trailing "/" apply to ScriptAlias directives as to
-    # Alias.
-    #
-    ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
-
-    #
-    # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
-    # CGI directory exists, if you have that configured.
-    #
-    <Directory "/var/www/cgi-bin">
-        AllowOverride None
-        Options None
-        Order allow,deny
-        Allow from all
-    </Directory>
-
-</IfModule>
-# End of aliases.
-
-#
-# Redirect allows you to tell clients about documents which used to exist in
-# your server's namespace, but do not anymore. This allows you to tell the
-# clients where to look for the relocated document.
-# Format: Redirect old-URI new-URL
-#
-
-#
-# Directives controlling the display of server-generated directory listings.
-#
-<IfModule mod_autoindex.c>
-
-    #
-    # FancyIndexing is whether you want fancy directory indexing or standard
-    #
-    IndexOptions FancyIndexing
-
-    #
-    # AddIcon* directives tell the server which icon to show for different
-    # files or filename extensions.  These are only displayed for
-    # FancyIndexed directories.
-    #
-    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
-
-    AddIconByType (TXT,/icons/text.gif) text/*
-    AddIconByType (IMG,/icons/image2.gif) image/*
-    AddIconByType (SND,/icons/sound2.gif) audio/*
-    AddIconByType (VID,/icons/movie.gif) video/*
-
-    AddIcon /icons/binary.gif .bin .exe
-    AddIcon /icons/binhex.gif .hqx
-    AddIcon /icons/tar.gif .tar
-    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
-    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
-    AddIcon /icons/a.gif .ps .ai .eps
-    AddIcon /icons/layout.gif .html .shtml .htm .pdf
-    AddIcon /icons/text.gif .txt
-    AddIcon /icons/c.gif .c
-    AddIcon /icons/p.gif .pl .py
-    AddIcon /icons/f.gif .for
-    AddIcon /icons/dvi.gif .dvi
-    AddIcon /icons/uuencoded.gif .uu
-    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
-    AddIcon /icons/tex.gif .tex
-    AddIcon /icons/bomb.gif core
-
-    AddIcon /icons/back.gif ..
-    AddIcon /icons/hand.right.gif README
-    AddIcon /icons/folder.gif ^^DIRECTORY^^
-    AddIcon /icons/blank.gif ^^BLANKICON^^
-
-    #
-    # DefaultIcon is which icon to show for files which do not have an icon
-    # explicitly set.
-    #
-    DefaultIcon /icons/unknown.gif
-
-    #
-    # AddDescription allows you to place a short description after a file in
-    # server-generated indexes.  These are only displayed for FancyIndexed
-    # directories.
-    # Format: AddDescription "description" filename
-    #
-    #AddDescription "GZIP compressed document" .gz
-    #AddDescription "tar archive" .tar
-    #AddDescription "GZIP compressed tar archive" .tgz
-
-    #
-    # ReadmeName is the name of the README file the server will look for by
-    # default, and append to directory listings.
-    #
-    # HeaderName is the name of a file which should be prepended to
-    # directory indexes. 
-    #
-    ReadmeName README.html
-    HeaderName HEADER.html
-
-    #
-    # IndexIgnore is a set of filenames which directory indexing should ignore
-    # and not include in the listing.  Shell-style wildcarding is permitted.
-    #
-    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
-
-</IfModule>
-# End of indexing directives.
-
-#
-# Document types.
-#
-<IfModule mod_mime.c>
-
-    #
-    # AddLanguage allows you to specify the language of a document. You can
-    # then use content negotiation to give a browser a file in a language
-    # it can understand.  
-    #
-    # Note 1: The suffix does not have to be the same as the language 
-    # keyword --- those with documents in Polish (whose net-standard 
-    # language code is pl) may wish to use "AddLanguage pl .po" to 
-    # avoid the ambiguity with the common suffix for perl scripts.
-    #
-    # Note 2: The example entries below illustrate that in quite
-    # some cases the two character 'Language' abbreviation is not
-    # identical to the two character 'Country' code for its country,
-    # E.g. 'Danmark/dk' versus 'Danish/da'.
-    #
-    # Note 3: In the case of 'ltz' we violate the RFC by using a three char 
-    # specifier. But there is 'work in progress' to fix this and get 
-    # the reference data for rfc1766 cleaned up.
-    #
-    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
-    # French (fr) - German (de) - Greek-Modern (el)
-    # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
-    # Portugese (pt) - Luxembourgeois* (ltz)
-    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
-    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
-    # Russian (ru)
-    #
-    AddLanguage da .dk
-    AddLanguage nl .nl
-    AddLanguage en .en
-    AddLanguage et .ee
-    AddLanguage fr .fr
-    AddLanguage de .de
-    AddLanguage el .el
-    AddLanguage he .he
-    AddCharset ISO-8859-8 .iso8859-8
-    AddLanguage it .it
-    AddLanguage ja .ja
-    AddCharset ISO-2022-JP .jis
-    AddLanguage kr .kr
-    AddCharset ISO-2022-KR .iso-kr
-    AddLanguage nn .nn
-    AddLanguage no .no
-    AddLanguage pl .po
-    AddCharset ISO-8859-2 .iso-pl
-    AddLanguage pt .pt
-    AddLanguage pt-br .pt-br
-    AddLanguage ltz .lu
-    AddLanguage ca .ca
-    AddLanguage es .es
-    AddLanguage sv .sv
-    AddLanguage cs .cz .cs
-    AddLanguage ru .ru
-    AddLanguage zh-TW .zh-tw
-    AddCharset Big5         .Big5    .big5
-    AddCharset WINDOWS-1251 .cp-1251
-    AddCharset CP866        .cp866
-    AddCharset ISO-8859-5   .iso-ru
-    AddCharset KOI8-R       .koi8-r
-    AddCharset UCS-2        .ucs2
-    AddCharset UCS-4        .ucs4
-    AddCharset UTF-8        .utf8
-
-    # LanguagePriority allows you to give precedence to some languages
-    # in case of a tie during content negotiation.
-    #
-    # Just list the languages in decreasing order of preference. We have
-    # more or less alphabetized them here. You probably want to change this.
-    #
-    <IfModule mod_negotiation.c>
-        LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
-    </IfModule>
-
-    #
-    # AddType allows you to tweak mime.types without actually editing it, or to
-    # make certain files to be certain types.
-    #
-    AddType application/x-tar .tgz
-
-    #
-    # AddEncoding allows you to have certain browsers uncompress
-    # information on the fly. Note: Not all browsers support this.
-    # Despite the name similarity, the following Add* directives have nothing
-    # to do with the FancyIndexing customization directives above.
-    #
-    AddEncoding x-compress .Z
-    AddEncoding x-gzip .gz .tgz
-    #
-    # If the AddEncoding directives above are commented-out, then you
-    # probably should define those extensions to indicate media types:
-    #
-    #AddType application/x-compress .Z
-    #AddType application/x-gzip .gz .tgz
-
-    #
-    # AddHandler allows you to map certain file extensions to "handlers",
-    # actions unrelated to filetype. These can be either built into the server
-    # or added with the Action command (see below)
-    #
-    # If you want to use server side includes, or CGI outside
-    # ScriptAliased directories, uncomment the following lines.
-    #
-    # To use CGI scripts:
-    #
-    #AddHandler cgi-script .cgi
-
-    #
-    # To use server-parsed HTML files
-    #
-    #AddType text/html .shtml
-    #AddHandler server-parsed .shtml
-
-    #
-    # Uncomment the following line to enable Apache's send-asis HTTP file
-    # feature
-    #
-    #AddHandler send-as-is asis
-
-    #
-    # If you wish to use server-parsed imagemap files, use
-    #
-    #AddHandler imap-file map
-
-    #
-    # To enable type maps, you might want to use
-    #
-    #AddHandler type-map var
-
-</IfModule>
-# End of document types.
-
-#
-# Action lets you define media types that will execute a script whenever
-# a matching file is called. This eliminates the need for repeated URL
-# pathnames for oft-used CGI file processors.
-# Format: Action media/type /cgi-script/location
-# Format: Action handler-name /cgi-script/location
-#
-
-#
-# MetaDir: specifies the name of the directory in which Apache can find
-# meta information files. These files contain additional HTTP headers
-# to include when sending the document
-#
-#MetaDir .web
-
-#
-# MetaSuffix: specifies the file name suffix for the file containing the
-# meta information.
-#
-#MetaSuffix .meta
-
-#
-# Customizable error response (Apache style)
-#  these come in three flavors
-#
-#    1) plain text
-ErrorDocument 500 /missing.html
-#  n.b.  the single leading (") marks it as text, it does not get output
-#
-#    2) local redirects
-ErrorDocument 404 /missing.html
-#  to redirect to local URL /missing.html
-#ErrorDocument 404 /cgi-bin/missing_handler.pl
-#  N.B.: You can redirect to a script or a document using server-side-includes.
-#
-#    3) external redirects
-ErrorDocument 402 /missing.html
-#  N.B.: Many of the environment variables associated with the original
-#  request will *not* be available to such a script.
-
-#
-# Customize behaviour based on the browser
-#
-<IfModule mod_setenvif.c>
-
-    #
-    # The following directives modify normal HTTP response behavior.
-    # The first directive disables keepalive for Netscape 2.x and browsers that
-    # spoof it. There are known problems with these browser implementations.
-    # The second directive is for Microsoft Internet Explorer 4.0b2
-    # which has a broken HTTP/1.1 implementation and does not properly
-    # support keepalive when it is used on 301 or 302 (redirect) responses.
-    #
-    BrowserMatch "Mozilla/2" nokeepalive
-    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
-
-    #
-    # The following directive disables HTTP/1.1 responses to browsers which
-    # are in violation of the HTTP/1.0 spec by not being able to grok a
-    # basic 1.1 response.
-    #
-    BrowserMatch "RealPlayer 4\.0" force-response-1.0
-    BrowserMatch "Java/1\.0" force-response-1.0
-    BrowserMatch "JDK/1\.0" force-response-1.0
-
-</IfModule>
-# End of browser customization directives
-
-#
-# Allow server status reports, with the URL of http://servername/server-status
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-status>
-#    SetHandler server-status
-#    Order deny,allow
-#    Deny from all
-#    Allow from .example.com
-#</Location>
-
-#
-# Allow remote server configuration reports, with the URL of
-# http://servername/server-info (requires that mod_info.c be loaded).
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-info>
-#    SetHandler server-info
-#    Order deny,allow
-#    Deny from all
-#    Allow from .example.com
-#</Location>
-
-#
-# There have been reports of people trying to abuse an old bug from pre-1.1
-# days.  This bug involved a CGI script distributed as a part of Apache.
-# By uncommenting these lines you can redirect these attacks to a logging 
-# script on phf.apache.org.  Or, you can record them yourself, using the script
-# support/phf_abuse_log.cgi.
-#
-#<Location /cgi-bin/phf*>
-#    Deny from all
-#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
-#</Location>
-
-### Section 3: Virtual Hosts
-#
-# VirtualHost: If you want to maintain multiple domains/hostnames on your
-# machine you can setup VirtualHost containers for them. Most configurations
-# use only name-based virtual hosts so the server doesn't need to worry about
-# IP addresses. This is indicated by the asterisks in the directives below.
-#
-# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
-# for further details before you try to setup virtual hosts.
-#
-# You may use the command line option '-S' to verify your virtual host
-# configuration.
-
-#
-# Use name-based virtual hosting.
-#
-#NameVirtualHost *:80
-
-#
-# VirtualHost example:
-# Almost any Apache directive may go into a VirtualHost container.
-# The first VirtualHost section is used for requests without a known
-# server name.
-#
-#<VirtualHost *:80>
-#    ServerAdmin webmaster@dummy-host.example.com
-#    DocumentRoot /www/docs/dummy-host.example.com
-#    ServerName dummy-host.example.com
-#    ErrorLog logs/dummy-host.example.com-error_log
-#    CustomLog logs/dummy-host.example.com-access_log common
-#</VirtualHost>
-
-# By default, all external Apache modules are disabled.  To enable a particular
-# module for Apache, make sure the necessary packages are installed.  Then
-# uncomment the appropriate Include line below, save the file, and restart
-# Apache.  Note that some modules may need additional configuration steps.  For
-# example, mod_ssl requires a site certificate which you may need to generate.
-#
-# Lastly, if you remove a module package, be sure to edit this file and comment
-# out the appropriate Include line.
-
-# ==> mod_php configuration settings <==
-#
-# PACKAGES REQUIRED:  openssl-solibs (A series) and/or openssl (N series),
-#                     mysql (AP series), gmp (L series), mhash (L series),
-#                     and apache (N series)
-#
-#Include /etc/apache/mod_php.conf
-
-# ==> mod_ssl configuration settings <==
-#
-# PACKAGES REQUIRED:  apache (N series) and openssl (N series)
-#
-#Include /etc/apache/mod_ssl.conf
-
-#NameVirtualHost VSERVER_IP
-
-Include /etc/apache/vhosts
diff --git a/templates/vserver/vserver.d/etc/apache/php.ini b/templates/vserver/vserver.d/etc/apache/php.ini
deleted file mode 100644
index e6cddef..0000000
--- a/templates/vserver/vserver.d/etc/apache/php.ini
+++ /dev/null
@@ -1,1122 +0,0 @@
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-;
-; This is the recommended, PHP 4-style version of the php.ini-dist file.  It
-; sets some non standard settings, that make PHP more efficient, more secure,
-; and encourage cleaner coding.
-; The price is that with these settings, PHP may be incompatible with some
-; applications, and sometimes, more difficult to develop with.  Using this
-; file is warmly recommended for production sites.  As all of the changes from
-; the standard settings are thoroughly documented, you can go over each one,
-; and decide whether you want to use it or not.
-;
-; For general information about the php.ini file, please consult the php.ini-dist
-; file, included in your PHP distribution.
-;
-; This file is different from the php.ini-dist file in the fact that it features
-; different values for several directives, in order to improve performance, while
-; possibly breaking compatibility with the standard out-of-the-box behavior of
-; PHP 3.  Please make sure you read what's different, and modify your scripts
-; accordingly, if you decide to use this file instead.
-;
-; - register_globals = Off         [Security, Performance]
-;     Global variables are no longer registered for input data (POST, GET, cookies,
-;     environment and other server variables).  Instead of using $foo, you must use
-;     you can use $_REQUEST["foo"] (includes any variable that arrives through the
-;     request, namely, POST, GET and cookie variables), or use one of the specific
-;     $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
-;     on where the input originates.  Also, you can look at the
-;     import_request_variables() function.
-;     Note that register_globals is going to be depracated (i.e., turned off by
-;     default) in the next version of PHP, because it often leads to security bugs.
-;     Read http://php.net/manual/en/security.registerglobals.php for further
-;     information.
-; - display_errors = Off           [Security]
-;     With this directive set to off, errors that occur during the execution of
-;     scripts will no longer be displayed as a part of the script output, and thus,
-;     will no longer be exposed to remote users.  With some errors, the error message
-;     content may expose information about your script, web server, or database
-;     server that may be exploitable for hacking.  Production sites should have this
-;     directive set to off.
-; - log_errors = On                [Security]
-;     This directive complements the above one.  Any errors that occur during the
-;     execution of your script will be logged (typically, to your server's error log,
-;     but can be configured in several ways).  Along with setting display_errors to off,
-;     this setup gives you the ability to fully understand what may have gone wrong,
-;     without exposing any sensitive information to remote users.
-; - output_buffering = 4096        [Performance]
-;     Set a 4KB output buffer.  Enabling output buffering typically results in less
-;     writes, and sometimes less packets sent on the wire, which can often lead to
-;     better performance.  The gain this directive actually yields greatly depends
-;     on which Web server you're working with, and what kind of scripts you're using.
-; - register_argc_argv = Off       [Performance]
-;     Disables registration of the somewhat redundant $argv and $argc global
-;     variables.
-; - magic_quotes_gpc = Off         [Performance]
-;     Input data is no longer escaped with slashes so that it can be sent into
-;     SQL databases without further manipulation.  Instead, you should use the
-;     function addslashes() on each input element you wish to send to a database.
-; - variables_order = "GPCS"       [Performance]
-;     The environment variables are not hashed into the $HTTP_ENV_VARS[].  To access
-;     environment variables, you can use getenv() instead.
-; - error_reporting = E_ALL        [Code Cleanliness, Security(?)]
-;     By default, PHP surpresses errors of type E_NOTICE.  These error messages
-;     are emitted for non-critical errors, but that could be a symptom of a bigger
-;     problem.  Most notably, this will cause error messages about the use
-;     of uninitialized variables to be displayed.
-; - allow_call_time_pass_reference = Off     [Code cleanliness]
-;     It's not possible to decide to force a variable to be passed by reference
-;     when calling a function.  The PHP 4 style to do this is by making the
-;     function require the relevant argument by reference.
-
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-engine = On
-
-; Allow the <? tag.  Otherwise, only <?php and <script> tags are recognized.  
-; NOTE: Using short tags should be avoided when developing applications or
-; libraries that are meant for redistribution, or deployment on PHP
-; servers which are not under your control, because short tags may not
-; be supported on the target server. For portable, redistributable code,
-; be sure not to use short tags.
-short_open_tag = On
-
-; Allow ASP-style <% %> tags.
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-precision    =  14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-y2k_compliance = On
-
-; Output buffering allows you to send header lines (including cookies) even
-; after you send body content, at the price of slowing PHP's output layer a
-; bit.  You can enable output buffering during runtime by calling the output
-; buffering functions.  You can also enable output buffering for all files by
-; setting this directive to On.  If you wish to limit the size of the buffer
-; to a certain size - you can use a maximum number of bytes instead of 'On', as
-; a value for this directive (e.g., output_buffering=4096).
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function.  For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-;       directive. Instead, explicitly set the output handler using ob_start().
-;       Using this ini directive may cause problems unless you know what script 
-;       is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-;       and you cannot use both "ob_gzhandler" and "zlib.output_compression". 
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP 
-;       outputs chunks that are few handreds bytes each as a result of compression. 
-;       If you want larger chunk size for better performence, enable output_buffering 
-;       also. 
-; Note: output_handler must be empty if this is set 'On' !!!!
-;       Instead you must use zlib.output_handler.
-zlib.output_compression = Off
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block.  This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block.  Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instanciated.
-; A warning appears if the specified function is not defined, or if the
-; function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a 
-; callback-function.
-unserialize_callback_func=
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; Whether to enable the ability to force arguments to be passed by reference
-; at function call time.  This method is deprecated and is likely to be
-; unsupported in future versions of PHP/Zend.  The encouraged method of
-; specifying which arguments should be passed by reference is in the function
-; declaration.  You're encouraged to try and turn this option Off and make
-; sure your scripts work properly with it in order to ensure they will work
-; with future versions of the language (you will receive a warning each time
-; you use this feature, and the argument will be passed by value instead of by
-; reference).
-allow_call_time_pass_reference = Off
-
-;
-; Safe Mode
-;
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-safe_mode_include_dir =								
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here.  By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-;
-; Note:  If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv().  These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below.  This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_classes =
-
-; Colors for Syntax Highlighting mode.  Anything that's acceptable in
-; <font color="??????"> would work.
-;highlight.string  = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg      = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html    = #000000
-
-
-;
-; Misc
-;
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header).  It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-expose_php = On
-
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-max_execution_time = 30     ; Maximum execution time of each script, in seconds
-max_input_time = 60	; Maximum amount of time each script may spend parsing request data
-memory_limit = 8M      ; Maximum amount of memory a script may consume (8MB)
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; error_reporting is a bit-field.  Or each number up to get desired error
-; reporting level
-; E_ALL             - All errors and warnings
-; E_ERROR           - fatal run-time errors
-; E_WARNING         - run-time warnings (non-fatal errors)
-; E_PARSE           - compile-time parse errors
-; E_NOTICE          - run-time notices (these are warnings which often result
-;                     from a bug in your code, but it's possible that it was
-;                     intentional (e.g., using an uninitialized variable and
-;                     relying on the fact it's automatically initialized to an
-;                     empty string)
-; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
-;                     initial startup
-; E_COMPILE_ERROR   - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR      - user-generated error message
-; E_USER_WARNING    - user-generated warning message
-; E_USER_NOTICE     - user-generated notice message
-;
-; Examples:
-;
-;   - Show all errors, except for notices
-;
-;error_reporting = E_ALL & ~E_NOTICE
-;
-;   - Show only errors
-;
-;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
-;
-;   - Show all errors
-;
-error_reporting  =  E_ALL
-
-; Print out errors (as a part of the output).  For production web sites,
-; you're strongly encouraged to turn this feature off, and use error logging
-; instead (see below).  Keeping display_errors enabled on a production web site
-; may reveal security information to end users, such as file paths on your Web
-; server, your database schema or other information.
-display_errors = Off
-
-; Even when display_errors is on, errors that occur during PHP's startup
-; sequence are not displayed.  It's strongly recommended to keep
-; display_startup_errors off, except for when debugging.
-display_startup_errors = Off
-
-; Log errors into a log file (server-specific log, stderr, or error_log (below))
-; As stated above, you're strongly advised to use error logging in place of
-; error displaying on production web sites.
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line until ignore_repeated_source is set true.
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting 
-; is On you will not log errors with repeated messages from different files or
-; sourcelines.
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if 
-; error reporting includes E_WARNING in the allowed list
-report_memleaks = On
-
-; Store the last error/warning message in $php_errormsg (boolean).
-track_errors = Off
-
-; Disable the inclusion of HTML tags in error messages.
-;html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct 
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://www.php.net/docs.php 
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including 
-; the dot.
-;docref_root = "/phpmanual/"
-;docref_ext = .html
-  
-; String to output before an error message.
-;error_prepend_string = "<font color=ff0000>"
-
-; String to output after an error message.
-;error_append_string = "</font>"
-
-; Log errors to specified file.
-;error_log = filename
-
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-;
-; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
-
-; The separator used in PHP generated URLs to separate arguments.
-; Default is "&". 
-;arg_separator.output = "&amp;"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; Default is "&". 
-; NOTE: Every character in this directive is considered as separator!
-;arg_separator.input = ";&"
-
-; This directive describes the order in which PHP registers GET, POST, Cookie,
-; Environment and Built-in variables (G, P, C, E & S respectively, often
-; referred to as EGPCS or GPC).  Registration is done from left to right, newer
-; values override older values.
-variables_order = "GPCS"
-
-; Whether or not to register the EGPCS variables as global variables.  You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.  This makes most sense when coupled with track_vars - in which
-; case you can access all of the GPC variables through the $HTTP_*_VARS[],
-; variables.
-;
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on;  Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-register_globals = Off
-
-; This directive tells PHP whether to declare the argv&argc variables (that
-; would contain the GET information).  If you don't use these variables, you
-; should turn it off for increased performance.
-register_argc_argv = Off
-
-; Maximum size of POST data that PHP will accept.
-post_max_size = 8M
-
-; This directive is deprecated.  Use variables_order instead.
-gpc_order = "GPC"
-
-; Magic quotes
-;
-
-; Magic quotes for incoming GET/POST/Cookie data.
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-magic_quotes_runtime = Off    
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-magic_quotes_sybase = Off
-
-; Automatically add files before or after any PHP document.
-auto_prepend_file =
-auto_append_file =
-
-; As of 4.0b4, PHP always outputs a character encoding by default in
-; the Content-type: header.  To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-default_mimetype = "text/html"
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable.                               
-;always_populate_raw_post_data = On
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"  
-;include_path = ".:/php/includes"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues.  The alternate is to use the
-; cgi.force_redirect configuration below
-doc_root =
-
-; The directory under which PHP opens the script using /~usernamem used only
-; if nonempty.
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; extension_dir = "./"
-extension_dir = "/usr/lib/php/extensions/"
-
-; Whether or not to enable the dl() function.  The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers.  Left undefined, PHP turns this on by default.  You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request.
-; cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape 
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution.  Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
-; this to 1 will cause PHP CGI to fix it's paths to conform to the spec.  A setting
-; of zero causes PHP to behave as before.  Default is zero.  You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client.  This allows IIS to define the
-; security context that the request runs under.  mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS.  Default is zero.
-; fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection
-; fastcgi.log = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-;cgi.rfc2616_headers = 0 
-
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-upload_max_filesize = 10M
-
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-allow_url_fopen = On
-
-; Define the anonymous ftp password (your email address)
-;from="john@doe.com"
-
-; Define the user agent for php to send
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; auto_detect_line_endings = Off
-
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-;
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-;   extension=modulename.extension
-;
-; For example, on Windows:
-;
-;   extension=msql.dll
-;
-; ... or under UNIX:
-;
-;   extension=msql.so
-;
-; Note that it should be the name of the module only; no directory information 
-; needs to go here.  Specify the location of the extension with the
-; extension_dir directive above.
-;
-; Load the MySQL module by default.  Comment this out if you don't use MySQL.
-extension=mysql.so
-
-; Load the gettext extension by default.  Comment this out if you don't have the
-; gettext shared library installed.
-extension=gettext.so
-
-;Windows Extensions
-;Note that MySQL and ODBC support is now built in, so no dll is needed for it.
-;
-;extension=php_mbstring.dll
-;extension=php_bz2.dll
-;extension=php_cpdf.dll
-;extension=php_crack.dll
-;extension=php_curl.dll
-;extension=php_db.dll
-;extension=php_dba.dll
-;extension=php_dbase.dll
-;extension=php_dbx.dll
-;extension=php_domxml.dll
-;extension=php_exif.dll
-;extension=php_fdf.dll
-;extension=php_filepro.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_hyperwave.dll
-;extension=php_iconv.dll
-;extension=php_ifx.dll
-;extension=php_iisfunc.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_java.dll
-;extension=php_ldap.dll
-;extension=php_mcrypt.dll
-;extension=php_mhash.dll
-;extension=php_mime_magic.dll
-;extension=php_ming.dll
-;extension=php_mssql.dll
-;extension=php_msql.dll
-;extension=php_oci8.dll
-;extension=php_openssl.dll
-;extension=php_oracle.dll
-;extension=php_pdf.dll
-;extension=php_pgsql.dll
-;extension=php_printer.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_sockets.dll
-;extension=php_sybase_ct.dll
-;extension=php_w32api.dll
-;extension=php_xmlrpc.dll
-;extension=php_xslt.dll
-;extension=php_yaz.dll
-;extension=php_zip.dll
-
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
-; runtime, you can define these variables by calling define_syslog_variables().
-define_syslog_variables  = Off
-
-[mail function]
-; For Win32 only.
-SMTP = localhost
-smtp_port = 25
-
-; For Win32 only.
-;sendmail_from = me@example.com
-
-; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
-;sendmail_path =
-
-[Java]
-;java.class.path = .\php_java.jar
-;java.home = c:\jdk
-;java.library = c:\jdk\jre\bin\hotspot\jvm.dll 
-;java.library.path = .\
-
-[SQL]
-sql.safe_mode = Off
-
-[ODBC]
-;odbc.default_db    =  Not yet implemented
-;odbc.default_user  =  Not yet implemented
-;odbc.default_pw    =  Not yet implemented
-
-; Allow or prevent persistent links.
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-odbc.check_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-odbc.max_links = -1  
-
-; Handling of LONG fields.  Returns number of bytes to variables.  0 means
-; passthru.
-odbc.defaultlrl = 4096  
-
-; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of uodbc.defaultlrl and uodbc.defaultbinmode
-odbc.defaultbinmode = 1  
-
-[MySQL]
-; Allow or prevent persistent links.
-mysql.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-mysql.max_links = -1
-
-; Default port number for mysql_connect().  If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
-; at MYSQL_PORT.
-mysql.default_port =
-
-; Default socket name for local MySQL connects.  If empty, uses the built-in
-; MySQL defaults.
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password!  And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-mysql.trace_mode = Off
-
-[mSQL]
-; Allow or prevent persistent links.
-msql.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-msql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent).  -1 means no limit.
-msql.max_links = -1
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect(). 
-; Auto reset feature requires a little overheads.
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links.  -1 means no limit.
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent).  -1 means no limit.
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Noitce message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-pgsql.log_notice = 0
-
-[Sybase]
-; Allow or prevent persistent links.
-sybase.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-sybase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-sybase.max_links = -1
-
-;sybase.interface_file = "/usr/sybase/interfaces"
-
-; Minimum error severity to display.
-sybase.min_error_severity = 10
-
-; Minimum message severity to display.
-sybase.min_message_severity = 10
-
-; Compatability mode with old versions of PHP 3.0.
-; If on, this will cause PHP to automatically assign types to results according
-; to their Sybase type, instead of treating them all as strings.  This
-; compatibility mode will probably not stay around forever, so try applying
-; whatever necessary changes to your code, and turn it off.
-sybase.compatability_mode = Off
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-sybct.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-sybct.min_client_severity = 10
-
-[dbx]
-; returned column names can be converted for compatibility reasons
-; possible values for dbx.colnames_case are
-; "unchanged" (default, if not set)
-; "lowercase"
-; "uppercase"
-; the recommended default is either upper- or lowercase, but
-; unchanged is currently set for backwards compatibility
-dbx.colnames_case = "lowercase"
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-bcmath.scale = 0
-
-[browscap]
-;browscap = extra/browscap.ini
-
-[Informix]
-; Default host for ifx_connect() (doesn't apply in safe mode).
-ifx.default_host =
-
-; Default user for ifx_connect() (doesn't apply in safe mode).
-ifx.default_user =
-
-; Default password for ifx_connect() (doesn't apply in safe mode).
-ifx.default_password =
-
-; Allow or prevent persistent links.
-ifx.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-ifx.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-ifx.max_links = -1
-
-; If on, select statements return the contents of a text blob instead of its id.
-ifx.textasvarchar = 0
-
-; If on, select statements return the contents of a byte blob instead of its id.
-ifx.byteasvarchar = 0
-
-; Trailing blanks are stripped from fixed-length char columns.  May help the
-; life of Informix SE users.
-ifx.charasvarchar = 0
-
-; If on, the contents of text and byte blobs are dumped to a file instead of
-; keeping them in memory.
-ifx.blobinfile = 0
-
-; NULL's are returned as empty strings, unless this is set to 1.  In that case,
-; NULL's are returned as string 'NULL'.
-ifx.nullformat = 0
-
-[Session]
-; Handler used to store/retrieve data.
-session.save_handler = files
-
-; Argument passed to save_handler.  In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this 
-; variable in order to use PHP's session functions.
-;session.save_path = /tmp
-
-; Whether to use cookies.
-session.use_cookies = 1
-
-; This option enables administrators to make their users invulnerable to 
-; attacks which involve passing session ids in URLs; defaults to 0.
-; session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-session.cookie_domain =
-
-; Handler used to serialize data.  php is the standard serializer of PHP.
-session.serialize_handler = php
-
-; Define the probability that the 'garbage collection' process is started
-; on every session initialization.
-; The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts
-; on each request.
-
-session.gc_probability = 1
-session.gc_divisor     = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-session.gc_maxlifetime = 1440
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, albeit register_globals
-; is disabled.  PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled.
-
-session.bug_compat_42 = 0
-session.bug_compat_warn = 1
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-session.referer_check =
-
-; How many bytes to read from the file.
-session.entropy_length = 0
-
-; Specified here to create the session id.
-session.entropy_file =
-
-;session.entropy_length = 16
-
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects.
-; or leave this empty to avoid sending anti-caching headers.
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-;   to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-;   in publically accessible computer. 
-; - User may access your site with the same session ID
-;   always using URL stored in browser's history or bookmarks.
-session.use_trans_sid = 0
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs.  If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent).  -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatability mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647.  Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647.  Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch.  0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. Default = 25
-;mssql.max_procs = 25
-
-[Assertion]
-; Assert(expr); active by default.
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-;assert.warning = On
-
-; Don't bail out by default.
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-;assert.callback = 0
-
-; Eval the expression with current error_reporting().  Set to true if you want
-; error_reporting(0) around the eval().
-;assert.quiet_eval = 0
-
-[Ingres II]
-; Allow or prevent persistent links.
-ingres.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-ingres.max_persistent = -1
-
-; Maximum number of links, including persistents.  -1 means no limit.
-ingres.max_links = -1
-
-; Default database (format: [node_id::]dbname[/srv_class]).
-ingres.default_database =
-
-; Default user.
-ingres.default_user =
-
-; Default password.
-ingres.default_password =
-
-[Verisign Payflow Pro]
-; Default Payflow Pro server.
-pfpro.defaulthost = "test-payflow.verisign.com"
-
-; Default port to connect to.
-pfpro.defaultport = 443
-
-; Default timeout in seconds.
-pfpro.defaulttimeout = 30
-
-; Default proxy IP address (if required).
-;pfpro.proxyaddress =
-
-; Default proxy port.
-;pfpro.proxyport =
-
-; Default proxy logon.
-;pfpro.proxylogon =
-
-; Default proxy password.
-;pfpro.proxypassword =
-
-[com]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-;com.typelib_file = 
-; allow Distributed-COM calls
-;com.allow_dcom = true
-; autoregister constants of a components typlib on com_load()
-;com.autoregister_typelib = true
-; register constants casesensitive
-;com.autoregister_casesensitive = false
-; show warnings on duplicate constat registrations
-;com.autoregister_verbose = true
-
-[Printer]
-;printer.default_printer = ""
-
-[mbstring]
-; language for internal character representation.
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation accoding to 
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-;       portable libs/applications.
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means 
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-;mbstring.func_overload = 0
-
-[FrontBase]
-;fbsql.allow_persistent = On
-;fbsql.autocommit = On
-;fbsql.default_database = 
-;fbsql.default_database_password =
-;fbsql.default_host =
-;fbsql.default_password =
-;fbsql.default_user = "_SYSTEM"
-;fbsql.generate_warnings = Off
-;fbsql.max_connections = 128
-;fbsql.max_links = 128
-;fbsql.max_persistent = -1
-;fbsql.max_results = 128
-;fbsql.batchSize = 1000
-
-[Crack]
-; Modify the setting below to match the directory location of the cracklib
-; dictionary files.  Include the base filename, but not the file extension.
-; crack.default_dictionary = "c:\php\lib\cracklib_dict"
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. 
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding 
-; is used. For the decode settings you can distinguish between motorola and 
-; intel byte order. A decode setting cannot be empty.
-;exif.encode_unicode = ISO-8859-15
-;exif.decode_unicode_motorola = UCS-2BE
-;exif.decode_unicode_intel    = UCS-2LE
-;exif.encode_jis = 
-;exif.decode_jis_motorola = JIS
-;exif.decode_jis_intel    = JIS
-
-; Local Variables:
-; tab-width: 4
-; End:
diff --git a/templates/vserver/vserver.d/etc/apache/vhosts b/templates/vserver/vserver.d/etc/apache/vhosts
deleted file mode 100644
index e69de29..0000000
--- a/templates/vserver/vserver.d/etc/apache/vhosts
+++ /dev/null
diff --git a/templates/vserver/vserver.d/etc/hosts b/templates/vserver/vserver.d/etc/hosts
deleted file mode 100644
index 6e33147..0000000
--- a/templates/vserver/vserver.d/etc/hosts
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# hosts		This file describes a number of hostname-to-address
-#		mappings for the TCP/IP subsystem.  It is mostly
-#		used at boot time, when no name servers are running.
-#		On small systems, this file can be used instead of a
-#		"named" name server.  Just add the names, addresses
-#		and any aliases to this file...
-#
-# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
-# should NEVER be named with the name of the machine.  It causes problems
-# for some (stupid) programs, irc and reputedly talk. :^)
-#
-
-# For loopbacking.
-127.0.0.1	localhost
-# This next entry is technically wrong, but good enough to get TCP/IP apps
-# to quit complaining that they can't verify the hostname on a loopback-only
-# Linux box.
-127.0.0.1	darkstar.example.net darkstar
-
-# End of hosts.
diff --git a/templates/vserver/vserver.d/etc/logrotate.d/apache b/templates/vserver/vserver.d/etc/logrotate.d/apache
deleted file mode 100644
index f31fbe2..0000000
--- a/templates/vserver/vserver.d/etc/logrotate.d/apache
+++ /dev/null
@@ -1,11 +0,0 @@
-/var/log/apache/access_log /var/log/apache/error_log {
-    monthly
-    nomail
-    compress
-    create 0664 root root
-    rotate 12
-    postrotate
-      /etc/rc.d/rc.httpd restart > /dev/null
-    endscript
-}
-
diff --git a/templates/vserver/vserver.d/etc/profile b/templates/vserver/vserver.d/etc/profile
deleted file mode 100644
index 563594a..0000000
--- a/templates/vserver/vserver.d/etc/profile
+++ /dev/null
@@ -1,87 +0,0 @@
-# /etc/profile: This file contains system-wide defaults used by
-# all Bourne (and related) shells.
-
-# Set the values for some environment variables:
-export MINICOM="-c on"
-export MANPATH=/usr/local/man:/usr/man:/usr/X11R6/man
-export HOSTNAME="`cat /etc/HOSTNAME`"
-export LESSOPEN="|lesspipe.sh %s"
-export LESS="-M"
-
-# If the user doesn't have a .inputrc, use the one in /etc.
-if [ ! -r "$HOME/.inputrc" ]; then
-  export INPUTRC=/etc/inputrc
-fi
-
-# Set the default system $PATH:
-PATH="/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/games"
-
-# For root users, ensure that /usr/local/sbin, /usr/sbin, and /sbin are in
-# the $PATH.  Some means of connection don't add these by default (sshd comes
-# to mind).
-if [ "`id -u`" = "0" ]; then
-  echo $PATH | grep /usr/local/sbin 1> /dev/null 2> /dev/null
-  if [ ! $? = 0 ]; then
-    PATH=/usr/local/sbin:/usr/sbin:/sbin:$PATH
-  fi
-fi
-
-# I had problems using 'eval tset' instead of 'TERM=', but you might want to 
-# try it anyway. I think with the right /etc/termcap it would work great.
-# eval `tset -sQ "$TERM"`
-if [ "$TERM" = "" -o "$TERM" = "unknown" ]; then
- TERM=linux
-fi
-
-# Set ksh93 visual editing mode:
-if [ "$SHELL" = "/bin/ksh" ]; then
-  VISUAL=emacs
-#  VISUAL=gmacs
-#  VISUAL=vi
-fi
-
-# Set a default shell prompt:
-#PS1='`hostname`:`pwd`# '
-if [ "$SHELL" = "/bin/pdksh" ]; then
- PS1='! $ '
-elif [ "$SHELL" = "/bin/ksh" ]; then
- PS1='! ${PWD/#$HOME/~}$ '
-elif [ "$SHELL" = "/bin/zsh" ]; then
- PS1='%n@%m:%~%# '
-elif [ "$SHELL" = "/bin/ash" ]; then
- PS1='$ '
-else
- PS1='\u@\h:\w\$ '
-fi
-PS2='> '
-export PATH DISPLAY LESS TERM PS1 PS2
-
-# Default umask.  A umask of 022 prevents new files from being created group
-# and world writable.
-umask 022
-
-# Set up the LS_COLORS and LS_OPTIONS environment variables for color ls:
-if [ "$SHELL" = "/bin/zsh" ]; then
- eval `dircolors -z`
-elif [ "$SHELL" = "/bin/ash" ]; then
- eval `dircolors -s`
-else
- eval `dircolors -b`
-fi
-
-# Append any additional sh scripts found in /etc/profile.d/:
-for profile_script in /etc/profile.d/*.sh ; do
-  if [ -x $profile_script ]; then
-    . $profile_script
-  fi
-done
-unset profile_script
-
-# For non-root users, add the current directory to the search path:
-if [ ! "`id -u`" = "0" ]; then
- PATH="$PATH:."
-fi
-
-# firewall:
-export FTP_PASSIVE=1
-
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc b/templates/vserver/vserver.d/etc/rc.d/rc
deleted file mode 100755
index eefbcc5..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash
-
-if [ "$1" == "3" ]; then
-  /etc/rc.d/rc.M
-elif [ "$1" == "6" ]; then
-  /etc/rc.d/rc.6
-else
-  echo "Invalid level."
-  exit 1
-fi
-
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.0 b/templates/vserver/vserver.d/etc/rc.d/rc.0
deleted file mode 100755
index bfec90a..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.0
+++ /dev/null
@@ -1,110 +0,0 @@
-#! /bin/sh
-#
-# rc.6		This file is executed by init when it goes into runlevel
-#		0 (halt) or runlevel 6 (reboot). It kills all processes,
-#		unmounts file systems and then either halts or reboots.
-#
-# Version:	@(#)/etc/rc.d/rc.6	2.47 Sat Jan 13 13:37:26 PST 2001
-#
-# Author:	Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
-# Modified by:  Patrick J. Volkerding, <volkerdi@slackware.com>
-#
-
-# Set the path.
-PATH=/sbin:/etc:/bin:/usr/bin
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
-  . /etc/rc.d/rc.sysvinit
-fi
-
-# Set linefeed mode to avoid staircase effect.
-stty onlcr
-
-echo "Running shutdown script $0:"
-
-# Find out how we were called.
-case "$0" in
-	*0)
-		command="halt"
-		;;
-	*6)
-		command=reboot
-		;;
-	*)
-		echo "$0: call me as \"rc.0\" or \"rc.6\" please!"
-		exit 1
-		;;
-esac
-
-# Stop the Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
-  /etc/rc.d/rc.httpd stop
-fi
-
-# Stop the MySQL database:
-if [ -r /var/run/mysql/mysql.pid ]; then
-  . /etc/rc.d/rc.mysqld stop
-fi
-
-# Stop the Samba server:
-if [ -x /etc/rc.d/rc.samba ]; then
-  . /etc/rc.d/rc.samba stop
-fi
-
-# Try to kill dhcpcd so the DHCP leases can be returned:
-killall -15 dhcpcd 1> /dev/null 2> /dev/null
-
-# Try to shut down pppd:
-PS="$(ps ax)"
-if echo "$PS" | grep -q -w pppd ; then
-  if [ -x /usr/sbin/ppp-off ]; then
-    /usr/sbin/ppp-off
-  fi
-fi
-
-# Turn off process accounting:
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
-  echo "Turning off process accounting."
-  /sbin/accton
-fi
-
-# Kill all processes.
-# INIT is supposed to handle this entirely now, but this didn't always
-# work correctly without this second pass at killing off the processes.
-# Since INIT already notified the user that processes were being killed,
-# we'll avoid echoing this info this time around.
-if [ "$1" != "fast" ]; then # shutdown did not already kill all processes
-  killall5 -15 
-  sleep 5
-  killall5 -9
-fi
-
-# Carry a random seed between reboots.
-echo "Saving random seed from /dev/urandom in /etc/random-seed."
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-chmod 600 /etc/random-seed
-
-# Before unmounting file systems write a reboot or halt record to wtmp.
-$command -w
-
-# Clear /var/lock/subsys.
-if [ -d /var/lock/subsys ]; then
-  rm -f /var/lock/subsys/*
-fi
-
-# This never hurts:
-sync
-
-# sleep 1 fixes problems with some hard drives that don't
-# otherwise finish syncing before reboot or poweroff
-sleep 1
-
-# This is to ensure all processes have completed on SMP machines:
-wait
-
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.4 b/templates/vserver/vserver.d/etc/rc.d/rc.4
deleted file mode 100644
index b972052..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.4
+++ /dev/null
@@ -1,256 +0,0 @@
-#!/bin/sh
-#
-# rc.M		This file is executed by init(8) when the system is being
-#		initialized for one of the "multi user" run levels (i.e.
-#		levels 1 through 6).  It usually does mounting of file
-#		systems et al.
-#
-# Version:	@(#)/etc/rc.d/rc.M	2.23	Wed Feb 26 19:20:58 PST 2003
-#
-# Author:	Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-#		Heavily modified by Patrick Volkerding <volkerdi@slackware.com>
-#
-
-# Tell the viewers what's going to happen.
-echo "Going multiuser..."
-
-# Screen blanks after 15 minutes idle time, and powers down in one hour
-# if the kernel supports APM or ACPI power management:
-#/bin/setterm -blank 15 -powersave powerdown -powerdown 60
-
-# Set the hostname.
-#if [ -r /etc/HOSTNAME ]; then
-#  /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .)
-#else
-  # fall back on this old default:
-#  echo "darkstar.example.net" > /etc/HOSTNAME
-#  /bin/hostname darkstar
-#fi
-
-# Save the contents of 'dmesg':
-#/bin/dmesg -s 65536 > /var/log/dmesg
-
-# Start the system logger.
-if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then
-  . /etc/rc.d/rc.syslog start
-fi
-
-# Initialize PCMCIA devices:
-#
-# NOTE: This used to be started near the top of rc.S so that PCMCIA devices
-# could be fsck'ed along with the other drives.  This had some unfortunate
-# side effects, however, since root isn't yet read-write, and /var might not
-# even be mounted the .pid files can't be correctly written in /var/run and
-# the pcmcia system can't be correctly shut down.  If you want some PCMCIA
-# partition to be mounted at boot (or when the card is inserted) then add
-# the appropriate lines to /etc/pcmcia/scsi.opts.
-#
-if [ -x /etc/rc.d/rc.pcmcia ] ; then
-  . /etc/rc.d/rc.pcmcia start
-  # The cards might need a little extra time here to initialize.
-  if [ -r /var/run/cardmgr.pid ]; then
-    sleep 5
-  fi
-fi
-
-# Initialize the networking hardware.  If your network driver is a module
-# and you haven't loaded it manually, this will be deferred until after
-# the hotplug system loads the module below.
-#if [ -x /etc/rc.d/rc.inet1 ]; then
-#  . /etc/rc.d/rc.inet1
-#fi
-
-# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices:
-if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then
-  # Don't run hotplug if 'nohotplug' was given at boot.
-  if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
-    echo "Activating hardware detection:  /etc/rc.d/rc.hotplug start"
-    . /etc/rc.d/rc.hotplug start
-  fi
-fi
-
-# Start networking daemons:
-if [ -x /etc/rc.d/rc.inet2 ]; then
-  . /etc/rc.d/rc.inet2
-fi
-
-# Remove stale locks and junk files (must be done after mount -a!)
-/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null
-
-# Remove stale hunt sockets so the game can start.
-if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then
-  echo "Removing your stale hunt sockets from /tmp."
-  /bin/rm -f /tmp/hunt*
-fi
-
-# Ensure basic filesystem permissions sanity.
-chmod 755 / 2> /dev/null
-chmod 1777 /tmp /var/tmp
-
-# Update all the shared library links:
-if [ -x /sbin/ldconfig ]; then
-  echo "Updating shared library links:  /sbin/ldconfig"
-  /sbin/ldconfig
-fi
-
-# Update the X font indexes:
-if [ -x /usr/X11R6/bin/fc-cache ]; then
-  echo "Updating X font indexes:  /usr/X11R6/bin/fc-cache"
-  /usr/X11R6/bin/fc-cache
-fi
-
-# Start the print spooling system.  This will usually be LPRng (lpd) or CUPS.
-if [ -x /etc/rc.d/rc.cups ]; then
-  # Start CUPS:
-  /etc/rc.d/rc.cups start
-elif [ -x /etc/rc.d/rc.lprng ]; then
-  # Start LPRng (lpd):
-  . /etc/rc.d/rc.lprng start
-fi
-
-# Start netatalk. (a file/print server for Macs using Appletalk)
-if [ -x /etc/rc.d/rc.atalk ]; then
-  /etc/rc.d/rc.atalk
-fi
-
-# Start smartd, which monitors the status of S.M.A.R.T. compatible
-# hard drives and reports any problems.  Note some devices (which aren't
-# smart, I guess ;) will hang if probed by smartd, so it's commented out
-# by default.
-#if [ -x /usr/sbin/smartd ]; then
-#  /usr/sbin/smartd
-#fi
-
-# Monitor the UPS with genpowerd.
-# To use this, uncomment this section and edit your settings in
-# /etc/genpowerd.conf (serial device, UPS type, etc).  For more information,
-# see "man genpowerd" or the extensive documentation in the
-# /usr/doc/genpower-1.0.3 directory.
-# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want
-# support for stopping the UPS's inverter after the machine halts.
-#if [ -x /sbin/genpowerd ]; then
-#  echo "Starting genpowerd daemon..."
-#  /sbin/genpowerd
-#fi
-
-# Turn on process accounting.  To enable process accounting, make sure the
-# option for BSD process accounting is enabled in your kernel, and then
-# create the file /var/log/pacct (touch /var/log/pacct).  By default, process
-# accounting is not enabled (since /var/log/pacct does not exist).  This is
-# because the log file can get VERY large.
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
-  /sbin/accton /var/log/pacct
-  chmod 640 /var/log/pacct
-  echo "Process accounting turned on."
-fi
-
-# Start crond (Dillon's crond):
-# If you want cron to actually log activity to /var/log/cron, then change
-# -l10 to -l8 to increase the logging level.
-if [ -x /usr/sbin/crond ]; then
-  /usr/sbin/crond -l10 >>/var/log/cron 2>&1
-fi
-
-# Start atd (manages jobs scheduled with 'at'):
-if [ -x /usr/sbin/atd ]; then
-  /usr/sbin/atd -b 15 -l 1
-fi
-
-# Slackware-Mini-Quota-HOWTO:
-# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to
-# the appropriate partitions as listed in /etc/fstab.  Here's an example:
-#
-# /dev/hda2      /home      ext3     defaults,usrquota      1   1
-#
-# You'll then need to setup initial quota files at the top of the partitions
-# to support quota, like this:
-# touch /home/aquota.user /home/aquota.group
-# chmod 600 /home/aquota.user /home/aquota.group
-#
-# Then, reboot to activate the system.
-# To edit user quotas, use 'edquota'.  See 'man edquota'.  Also, the
-# official Quota Mini-HOWTO has lots of useful information.  That can be found
-# here:  /usr/doc/Linux-HOWTOs/Quota
-
-# Check quotas and then turn quota system on:
-if grep -q quota /etc/fstab ; then
-  if [ -x /sbin/quotacheck ]; then
-    echo "Checking filesystem quotas:  /sbin/quotacheck -avugm"
-    /sbin/quotacheck -avugm
-  fi
-  if [ -x /sbin/quotaon ]; then
-    echo "Activating filesystem quotas:  /sbin/quotaon -avug"
-    /sbin/quotaon -avug
-  fi
-fi
-
-# Start the sendmail daemon:
-if [ -x /etc/rc.d/rc.sendmail ]; then
-  . /etc/rc.d/rc.sendmail start
-fi
-
-# Start the APM daemon if APM is enabled in the kernel:
-if [ -x /usr/sbin/apmd ]; then
-  if cat /proc/apm 1> /dev/null 2> /dev/null ; then
-    echo "Starting APM daemon:  /usr/sbin/apmd"
-    /usr/sbin/apmd
-  fi
-fi
-
-# Start the ACPI (Advanced Configuration and Power Interface) daemon:
-if [ -x /etc/rc.d/rc.acpid ]; then
-  . /etc/rc.d/rc.acpid start
-fi
-
-# Load ALSA (sound) defaults:
-if [ -x /etc/rc.d/rc.alsa ]; then
-  . /etc/rc.d/rc.alsa
-fi
-
-# Load a custom screen font if the user has an rc.font script.
-if [ -x /etc/rc.d/rc.font ]; then
-  . /etc/rc.d/rc.font
-fi
-
-# Load a custom keymap if the user has an rc.keymap script.
-if [ -x /etc/rc.d/rc.keymap ]; then
-  . /etc/rc.d/rc.keymap
-fi
-
-# Initialize HP Officejet support:
-if [ -x /etc/rc.d/rc.hpoj ]; then
-  . /etc/rc.d/rc.hpoj start
-fi
-
-# Start the MySQL database:
-if [ -x /etc/rc.d/rc.mysqld ]; then
-  . /etc/rc.d/rc.mysqld start
-fi
-
-# Start Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
-  . /etc/rc.d/rc.httpd start
-fi
-
-# Start Samba (a file/print server for Win95/NT machines).
-# Samba can be started in /etc/inetd.conf instead.
-if [ -x /etc/rc.d/rc.samba ]; then
-  . /etc/rc.d/rc.samba start
-fi
-
-# Start the GPM mouse server:
-if [ -x /etc/rc.d/rc.gpm ]; then
-  . /etc/rc.d/rc.gpm start
-fi
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
-  . /etc/rc.d/rc.sysvinit
-fi
-
-# Start the local setup procedure.
-if [ -x /etc/rc.d/rc.local ]; then
-  . /etc/rc.d/rc.local
-fi
-
-# All done.
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.6 b/templates/vserver/vserver.d/etc/rc.d/rc.6
deleted file mode 100755
index bfec90a..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.6
+++ /dev/null
@@ -1,110 +0,0 @@
-#! /bin/sh
-#
-# rc.6		This file is executed by init when it goes into runlevel
-#		0 (halt) or runlevel 6 (reboot). It kills all processes,
-#		unmounts file systems and then either halts or reboots.
-#
-# Version:	@(#)/etc/rc.d/rc.6	2.47 Sat Jan 13 13:37:26 PST 2001
-#
-# Author:	Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
-# Modified by:  Patrick J. Volkerding, <volkerdi@slackware.com>
-#
-
-# Set the path.
-PATH=/sbin:/etc:/bin:/usr/bin
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
-  . /etc/rc.d/rc.sysvinit
-fi
-
-# Set linefeed mode to avoid staircase effect.
-stty onlcr
-
-echo "Running shutdown script $0:"
-
-# Find out how we were called.
-case "$0" in
-	*0)
-		command="halt"
-		;;
-	*6)
-		command=reboot
-		;;
-	*)
-		echo "$0: call me as \"rc.0\" or \"rc.6\" please!"
-		exit 1
-		;;
-esac
-
-# Stop the Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
-  /etc/rc.d/rc.httpd stop
-fi
-
-# Stop the MySQL database:
-if [ -r /var/run/mysql/mysql.pid ]; then
-  . /etc/rc.d/rc.mysqld stop
-fi
-
-# Stop the Samba server:
-if [ -x /etc/rc.d/rc.samba ]; then
-  . /etc/rc.d/rc.samba stop
-fi
-
-# Try to kill dhcpcd so the DHCP leases can be returned:
-killall -15 dhcpcd 1> /dev/null 2> /dev/null
-
-# Try to shut down pppd:
-PS="$(ps ax)"
-if echo "$PS" | grep -q -w pppd ; then
-  if [ -x /usr/sbin/ppp-off ]; then
-    /usr/sbin/ppp-off
-  fi
-fi
-
-# Turn off process accounting:
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
-  echo "Turning off process accounting."
-  /sbin/accton
-fi
-
-# Kill all processes.
-# INIT is supposed to handle this entirely now, but this didn't always
-# work correctly without this second pass at killing off the processes.
-# Since INIT already notified the user that processes were being killed,
-# we'll avoid echoing this info this time around.
-if [ "$1" != "fast" ]; then # shutdown did not already kill all processes
-  killall5 -15 
-  sleep 5
-  killall5 -9
-fi
-
-# Carry a random seed between reboots.
-echo "Saving random seed from /dev/urandom in /etc/random-seed."
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-chmod 600 /etc/random-seed
-
-# Before unmounting file systems write a reboot or halt record to wtmp.
-$command -w
-
-# Clear /var/lock/subsys.
-if [ -d /var/lock/subsys ]; then
-  rm -f /var/lock/subsys/*
-fi
-
-# This never hurts:
-sync
-
-# sleep 1 fixes problems with some hard drives that don't
-# otherwise finish syncing before reboot or poweroff
-sleep 1
-
-# This is to ensure all processes have completed on SMP machines:
-wait
-
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.K b/templates/vserver/vserver.d/etc/rc.d/rc.K
deleted file mode 100755
index 00a1501..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.K
+++ /dev/null
@@ -1,88 +0,0 @@
-#! /bin/sh
-#
-# rc.K 		This file is executed by init when it goes into runlevel
-#		1, which is the administrative state. It kills all
-#		daemons and then puts the system into single user mode.
-#		Note that the file systems are kept mounted.
-#
-# Version:	@(#)/etc/rc.d/rc.K	3.1415 Sat Jan 13 13:37:26 PST 2001
-#
-# Author:	Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
-# Modified by:  Patrick J. Volkerding <volkerdi@slackware.com>
-#
-
-# Set the path.
-PATH=/sbin:/bin:/usr/bin:/usr/sbin
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
-  . /etc/rc.d/rc.sysvinit
-fi
-
-# Try to turn off quota:
-if grep -q quota /etc/fstab ; then
-  if [ -x /sbin/quotaoff ]; then
-    echo "Turning off filesystem quotas."
-    /sbin/quotaoff -a
-  fi
-fi
-
-# Try to turn off accounting:
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
-  echo "Turning off accounting."
-  /sbin/accton
-fi
-
-# Stop the Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
-  /etc/rc.d/rc.httpd stop
-fi
-
-# Stop the Samba server:
-if [ -x /etc/rc.d/rc.samba ]; then
-  . /etc/rc.d/rc.samba stop
-fi
-
-# Shut down the NFS server:
-if [ -x /etc/rc.d/rc.nfsd ]; then
-  /etc/rc.d/rc.nfsd stop
-fi
-
-# Shut down PCMCIA devices:
-if [ -x /etc/rc.d/rc.pcmcia ] ; then
-  . /etc/rc.d/rc.pcmcia stop
-  # The cards might need a little extra time here to initialize.
-  sleep 5
-fi
-
-# Kill all processes.
-echo
-echo "Sending all processes the SIGHUP signal."
-killall5 -1
-echo -n "Waiting for processes to hang up"
-for loop in 0 1 2 3 4 5 ; do
-  sleep 1
-  echo -n "."
-done
-echo
-echo "Sending all processes the SIGTERM signal."
-killall5 -15
-echo -n "Waiting for processes to terminate"
-for loop in 0 1 2 3 4 5 ; do
-  sleep 1
-  echo -n "."
-done
-echo
-echo "Sending all processes the SIGKILL signal."
-killall5 -9
-echo -n "Waiting for processes to exit"
-for loop in 0 1 2 3 4 5 ; do
-  sleep 1
-  echo -n "."
-done
-echo
-
-# Now go to the single user level
-echo "Going to single user mode..."
-telinit -t 1 1
-
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.M b/templates/vserver/vserver.d/etc/rc.d/rc.M
deleted file mode 100755
index 0cb3343..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.M
+++ /dev/null
@@ -1,256 +0,0 @@
-#!/bin/sh
-#
-# rc.M		This file is executed by init(8) when the system is being
-#		initialized for one of the "multi user" run levels (i.e.
-#		levels 1 through 6).  It usually does mounting of file
-#		systems et al.
-#
-# Version:	@(#)/etc/rc.d/rc.M	2.23	Wed Feb 26 19:20:58 PST 2003
-#
-# Author:	Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-#		Heavily modified by Patrick Volkerding <volkerdi@slackware.com>
-#
-
-# Tell the viewers what's going to happen.
-echo "Going multiuser..."
-
-# Screen blanks after 15 minutes idle time, and powers down in one hour
-# if the kernel supports APM or ACPI power management:
-#/bin/setterm -blank 15 -powersave powerdown -powerdown 60
-
-# Set the hostname.
-#if [ -r /etc/HOSTNAME ]; then
-#  /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .)
-#else
-  # fall back on this old default:
-#  echo "darkstar.example.net" > /etc/HOSTNAME
-#  /bin/hostname darkstar
-#fi
-
-# Save the contents of 'dmesg':
-#/bin/dmesg -s 65536 > /var/log/dmesg
-
-# Start the system logger.
-if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then
-  . /etc/rc.d/rc.syslog start
-fi
-
-# Initialize PCMCIA devices:
-#
-# NOTE: This used to be started near the top of rc.S so that PCMCIA devices
-# could be fsck'ed along with the other drives.  This had some unfortunate
-# side effects, however, since root isn't yet read-write, and /var might not
-# even be mounted the .pid files can't be correctly written in /var/run and
-# the pcmcia system can't be correctly shut down.  If you want some PCMCIA
-# partition to be mounted at boot (or when the card is inserted) then add
-# the appropriate lines to /etc/pcmcia/scsi.opts.
-#
-if [ -x /etc/rc.d/rc.pcmcia ] ; then
-  . /etc/rc.d/rc.pcmcia start
-  # The cards might need a little extra time here to initialize.
-  if [ -r /var/run/cardmgr.pid ]; then
-    sleep 5
-  fi
-fi
-
-# Initialize the networking hardware.  If your network driver is a module
-# and you haven't loaded it manually, this will be deferred until after
-# the hotplug system loads the module below.
-#if [ -x /etc/rc.d/rc.inet1 ]; then
-#  . /etc/rc.d/rc.inet1
-#fi
-
-# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices:
-if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then
-  # Don't run hotplug if 'nohotplug' was given at boot.
-  if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
-    echo "Activating hardware detection:  /etc/rc.d/rc.hotplug start"
-    . /etc/rc.d/rc.hotplug start
-  fi
-fi
-
-# Start networking daemons:
-if [ -x /etc/rc.d/rc.inet2 ]; then
-  . /etc/rc.d/rc.inet2
-fi
-
-# Remove stale locks and junk files (must be done after mount -a!)
-/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null
-
-# Remove stale hunt sockets so the game can start.
-if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then
-  echo "Removing your stale hunt sockets from /tmp."
-  /bin/rm -f /tmp/hunt*
-fi
-
-# Ensure basic filesystem permissions sanity.
-chmod 755 / 2> /dev/null
-chmod 1777 /tmp /var/tmp
-
-# Update all the shared library links:
-if [ -x /sbin/ldconfig ]; then
-  echo "Updating shared library links: /sbin/ldconfig"
-  /sbin/ldconfig
-fi
-
-# Update the X font indexes:
-if [ -x /usr/X11R6/bin/fc-cache ]; then
-  echo "Updating X font indexes: /usr/X11R6/bin/fc-cache"
-  /usr/X11R6/bin/fc-cache
-fi
-
-# Start the print spooling system.  This will usually be LPRng (lpd) or CUPS.
-if [ -x /etc/rc.d/rc.cups ]; then
-  # Start CUPS:
-  /etc/rc.d/rc.cups start
-elif [ -x /etc/rc.d/rc.lprng ]; then
-  # Start LPRng (lpd):
-  . /etc/rc.d/rc.lprng start
-fi
-
-# Start netatalk. (a file/print server for Macs using Appletalk)
-if [ -x /etc/rc.d/rc.atalk ]; then
-  /etc/rc.d/rc.atalk
-fi
-
-# Start smartd, which monitors the status of S.M.A.R.T. compatible
-# hard drives and reports any problems.  Note some devices (which aren't
-# smart, I guess ;) will hang if probed by smartd, so it's commented out
-# by default.
-#if [ -x /usr/sbin/smartd ]; then
-#  /usr/sbin/smartd
-#fi
-
-# Monitor the UPS with genpowerd.
-# To use this, uncomment this section and edit your settings in
-# /etc/genpowerd.conf (serial device, UPS type, etc).  For more information,
-# see "man genpowerd" or the extensive documentation in the
-# /usr/doc/genpower-1.0.3 directory.
-# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want
-# support for stopping the UPS's inverter after the machine halts.
-#if [ -x /sbin/genpowerd ]; then
-#  echo "Starting genpowerd daemon..."
-#  /sbin/genpowerd
-#fi
-
-# Turn on process accounting.  To enable process accounting, make sure the
-# option for BSD process accounting is enabled in your kernel, and then
-# create the file /var/log/pacct (touch /var/log/pacct).  By default, process
-# accounting is not enabled (since /var/log/pacct does not exist).  This is
-# because the log file can get VERY large.
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
-  /sbin/accton /var/log/pacct
-  chmod 640 /var/log/pacct
-  echo "Process accounting turned on."
-fi
-
-# Start crond (Dillon's crond):
-# If you want cron to actually log activity to /var/log/cron, then change
-# -l10 to -l8 to increase the logging level.
-if [ -x /usr/sbin/crond ]; then
-  /usr/sbin/crond -l10 >>/var/log/cron 2>&1
-fi
-
-# Start atd (manages jobs scheduled with 'at'):
-if [ -x /usr/sbin/atd ]; then
-  /usr/sbin/atd -b 15 -l 1
-fi
-
-# Slackware-Mini-Quota-HOWTO:
-# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to
-# the appropriate partitions as listed in /etc/fstab.  Here's an example:
-#
-# /dev/hda2      /home      ext3     defaults,usrquota      1   1
-#
-# You'll then need to setup initial quota files at the top of the partitions
-# to support quota, like this:
-# touch /home/aquota.user /home/aquota.group
-# chmod 600 /home/aquota.user /home/aquota.group
-#
-# Then, reboot to activate the system.
-# To edit user quotas, use 'edquota'.  See 'man edquota'.  Also, the
-# official Quota Mini-HOWTO has lots of useful information.  That can be found
-# here:  /usr/doc/Linux-HOWTOs/Quota
-
-# Check quotas and then turn quota system on:
-if grep -q quota /etc/fstab ; then
-  if [ -x /sbin/quotacheck ]; then
-    echo "Checking filesystem quotas:  /sbin/quotacheck -avugm"
-    /sbin/quotacheck -avugm
-  fi
-  if [ -x /sbin/quotaon ]; then
-    echo "Activating filesystem quotas:  /sbin/quotaon -avug"
-    /sbin/quotaon -avug
-  fi
-fi
-
-# Start the sendmail daemon:
-if [ -x /etc/rc.d/rc.sendmail ]; then
-  . /etc/rc.d/rc.sendmail start
-fi
-
-# Start the APM daemon if APM is enabled in the kernel:
-if [ -x /usr/sbin/apmd ]; then
-  if cat /proc/apm 1> /dev/null 2> /dev/null ; then
-    echo "Starting APM daemon:  /usr/sbin/apmd"
-    /usr/sbin/apmd
-  fi
-fi
-
-# Start the ACPI (Advanced Configuration and Power Interface) daemon:
-if [ -x /etc/rc.d/rc.acpid ]; then
-  . /etc/rc.d/rc.acpid start
-fi
-
-# Load ALSA (sound) defaults:
-if [ -x /etc/rc.d/rc.alsa ]; then
-  . /etc/rc.d/rc.alsa
-fi
-
-# Load a custom screen font if the user has an rc.font script.
-if [ -x /etc/rc.d/rc.font ]; then
-  . /etc/rc.d/rc.font
-fi
-
-# Load a custom keymap if the user has an rc.keymap script.
-if [ -x /etc/rc.d/rc.keymap ]; then
-  . /etc/rc.d/rc.keymap
-fi
-
-# Initialize HP Officejet support:
-if [ -x /etc/rc.d/rc.hpoj ]; then
-  . /etc/rc.d/rc.hpoj start
-fi
-
-# Start the MySQL database:
-if [ -x /etc/rc.d/rc.mysqld ]; then
-  . /etc/rc.d/rc.mysqld start
-fi
-
-# Start Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
-  . /etc/rc.d/rc.httpd start
-fi
-
-# Start Samba (a file/print server for Win95/NT machines).
-# Samba can be started in /etc/inetd.conf instead.
-if [ -x /etc/rc.d/rc.samba ]; then
-  . /etc/rc.d/rc.samba start
-fi
-
-# Start the GPM mouse server:
-if [ -x /etc/rc.d/rc.gpm ]; then
-  . /etc/rc.d/rc.gpm start
-fi
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
-  . /etc/rc.d/rc.sysvinit
-fi
-
-# Start the local setup procedure.
-if [ -x /etc/rc.d/rc.local ]; then
-  . /etc/rc.d/rc.local
-fi
-
-# All done.
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.S b/templates/vserver/vserver.d/etc/rc.d/rc.S
deleted file mode 100755
index 05c75b4..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.S
+++ /dev/null
@@ -1,294 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.S:  System initialization script.
-#
-# Mostly written by:  Patrick J. Volkerding, <volkerdi@slackware.com>
-#
-
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-
-# Mount /proc right away:
-/sbin/mount -v proc /proc -n -t proc
-
-# If 'nohotplug' was given at boot, or rc.hotplug has been turned off
-# (is not executable), then shut off hotplugging in the kernel now.
-# Turning off hotplug is *not* recommended, and will break some things.
-if [ -w /proc/sys/kernel/hotplug ]; then
-  if grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
-    echo "/dev/null" > /proc/sys/kernel/hotplug
-  elif [ ! -x /etc/rc.d/rc.hotplug ]; then
-    echo "/dev/null" > /proc/sys/kernel/hotplug
-  fi
-fi
-
-# Start devfsd if necessary.  On newer kernels, udev should be used instead.
-if [ -x /etc/rc.d/rc.devfsd ]; then
-  /etc/rc.d/rc.devfsd start
-fi
-
-# Mount sysfs next, if the kernel supports it:
-if [ -d /sys ]; then
-  if cat /proc/filesystems | grep -w sysfs 1> /dev/null 2> /dev/null ; then
-    if ! cat /proc/mounts | grep -w sysfs 1> /dev/null 2> /dev/null ; then
-      /sbin/mount -v sysfs /sys -n -t sysfs
-    fi
-  fi
-fi
-
-# Initialize udev to manage /dev entries for 2.6.x kernels:
-if [ -x /etc/rc.d/rc.udev ]; then
-  if ! grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
-    /etc/rc.d/rc.udev
-  fi
-fi
-
-# Enable swapping:
-/sbin/swapon -a
-
-# Test to see if the root partition is read-only, like it ought to be.
-READWRITE=no
-if touch /fsrwtestfile 2>/dev/null; then
-  rm -f /fsrwtestfile
-  READWRITE=yes
-else
-  echo "Testing root filesystem status:  read-only filesystem"
-fi
-
-# See if a forced filesystem check was requested at shutdown:
-if [ -r /etc/forcefsck ]; then
-  FORCEFSCK="-f"
-fi
-
-# Check the root filesystem:
-if [ ! $READWRITE = yes ]; then
-  RETVAL=0
-  if [ ! -r /etc/fastboot ]; then
-    echo "Checking root filesystem:"
-    /sbin/fsck $FORCEFSCK -C -a /
-    RETVAL=$?
-  fi
-  # An error code of 2 or higher will require a reboot.
-  if [ $RETVAL -ge 2 ]; then
-    # An error code equal to or greater than 4 means that some errors
-    # could not be corrected.  This requires manual attention, so we
-    # offer a chance to try to fix the problem in single-user mode:
-    if [ $RETVAL -ge 4 ]; then
-      echo
-      echo "***********************************************************"
-      echo "*** An error occurred during the root filesystem check. ***"
-      echo "*** You will now be given a chance to log into the      ***"
-      echo "*** system in single-user mode to fix the problem.      ***"
-      echo "***                                                     ***"
-      echo "*** If you are using the ext2 filesystem, running       ***"
-      echo "*** 'e2fsck -v -y <partition>' might help.              ***"
-      echo "***********************************************************"
-      echo
-      echo "Once you exit the single-user shell, the system will reboot."
-      echo
-      PS1="(Repair filesystem) \#"; export PS1
-      sulogin
-    else # With an error code of 2 or 3, reboot the machine automatically:
-      echo
-      echo "***********************************"
-      echo "*** The filesystem was changed. ***"
-      echo "*** The system will now reboot. ***"
-      echo "***********************************"
-      echo
-    fi
-    echo "Unmounting file systems."
-    /sbin/umount -a -r
-    /sbin/mount -n -o remount,ro /
-    echo "Rebooting system."
-    sleep 2
-    reboot -f
-  fi
-  # Remount the root filesystem in read-write mode
-  echo "Remounting root device with read-write enabled."
-  /sbin/mount -w -v -n -o remount /
-  if [ $? -gt 0 ] ; then
-    echo
-    echo "Attempt to remount root device as read-write failed!  This is going to"
-    echo "cause serious problems."
-    echo 
-    echo "If you're using the UMSDOS filesystem, you **MUST** mount the root partition"
-    echo "read-write!  You can make sure the root filesystem is getting mounted "
-    echo "read-write with the 'rw' flag to Loadlin:"
-    echo
-    echo "loadlin vmlinuz root=/dev/hda1 rw   (replace /dev/hda1 with your root device)"
-    echo
-    echo "Normal bootdisks can be made to mount a system read-write with the rdev command:"
-    echo
-    echo "rdev -R /dev/fd0 0"
-    echo
-    echo "You can also get into your system by using a boot disk with a command like this"
-    echo "on the LILO prompt line:  (change the root partition name as needed)"
-    echo 
-    echo "LILO: mount root=/dev/hda1 rw"
-    echo
-    echo "Please press ENTER to continue, then reboot and use one of the above methods to"
-    echo -n "get into your machine and start looking for the problem. " 
-    read junk; 
-  fi
-else
-  echo "Testing root filesystem status:  read-write filesystem"
-  if cat /etc/fstab | grep ' / ' | grep umsdos 1> /dev/null 2> /dev/null ; then
-    ROOTTYPE="umsdos"
-  fi
-  if [ ! "$ROOTTYPE" = "umsdos" ]; then # no warn for UMSDOS
-    echo
-    echo "*** ERROR: Root partition has already been mounted read-write. Cannot check!"
-    echo
-    echo "For filesystem checking to work properly, your system must initially mount"
-    echo "the root partition as read only. Please modify your kernel with 'rdev' so that"
-    echo "it does this. If you're booting with LILO, add a line:"
-    echo
-    echo "   read-only"
-    echo
-    echo "to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it."
-    echo
-    echo "If you boot from a kernel on a floppy disk, put it in the drive and type:"
-    echo "   rdev -R /dev/fd0 1"
-    echo
-    echo "If you boot from a bootdisk, or with Loadlin, you can add the 'ro' flag."
-    echo
-    echo "This will fix the problem *AND* eliminate this annoying message. :^)"
-    echo
-    echo -n "Press ENTER to continue. "
-    read junk;
-  fi
-fi # Done checking root filesystem
-
-# Any /etc/mtab that exists here is old, so we delete it to start over:
-/bin/rm -f /etc/mtab*
-# Remounting the / partition will initialize the new /etc/mtab:
-/sbin/mount -w -o remount /
-
-# Fix /etc/mtab to list sys and proc if they were not yet entered in
-# /etc/mtab because / was still mounted read-only:
-if [ -d /proc/sys ]; then
-  /sbin/mount -f proc /proc -t proc
-fi
-if [ -d /sys/bus ]; then
-  /sbin/mount -f sysfs /sys -t sysfs
-fi
-
-# Set the system time from the hardware clock using hwclock --hctosys.
-if [ -x /sbin/hwclock ]; then
-  if grep "^UTC" /etc/hardwareclock 1> /dev/null 2> /dev/null ; then
-    echo "Setting system time from the hardware clock (UTC)."
-    /sbin/hwclock --utc --hctosys
-  else
-    echo "Setting system time from the hardware clock (localtime)."
-    /sbin/hwclock --localtime --hctosys
-  fi
-fi
-
-# Configure ISA Plug-and-Play devices:
-if [ -r /etc/isapnp.conf ]; then
-  if [ -x /sbin/isapnp ]; then
-    /sbin/isapnp /etc/isapnp.conf
-  fi
-fi
-
-# This loads any kernel modules that are needed.  These might be required to
-# use your ethernet card, sound card, or other optional hardware.
-if [ -x /etc/rc.d/rc.modules -a -r /proc/modules ]; then
-  . /etc/rc.d/rc.modules
-fi
-
-# Configure runtime kernel parameters:
-if [ -x /sbin/sysctl -a -r /etc/sysctl.conf ]; then
-  /sbin/sysctl -e -p /etc/sysctl.conf
-fi
-
-# Initialize the Logical Volume Manager.
-# This won't start unless we find /etc/lvmtab (LVM1) or 
-# /etc/lvm/backup/ (LVM2).  This is created by /sbin/vgscan, so to
-# use LVM you must run /sbin/vgscan yourself the first time (and
-# create some VGs and LVs).
-if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
-  echo "Initializing LVM (Logical Volume Manager):"
-  # Check for device-mapper support.
-  if ! cat /proc/devices | grep -w device-mapper 1> /dev/null 2> /dev/null ; then
-    # If device-mapper exists as a module, try to load it.
-    if [ -r /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko ]; then
-      insmod /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko
-    fi
-  fi
-  # Scan for new volume groups:
-  /sbin/vgscan 2> /dev/null
-  if [ $? = 0 ]; then
-    # This needs a moment to register.
-    sleep 10
-    # Make volume groups available to the kernel.
-    # This should also make logical volumes available.
-    /sbin/vgchange -ay
-    # Enable swapping again in case any LVs are used for swap.  Ignore previous error.  :-)
-    /sbin/swapon -a
-  fi
-fi
-
-# Check all the non-root filesystems:
-if [ ! -r /etc/fastboot ]; then
-  echo "Checking non-root filesystems:"
-  /sbin/fsck $FORCEFSCK -C -R -A -a
-fi
-
-# mount non-root file systems in fstab (but not NFS or SMB 
-# because TCP/IP is not yet configured, and not proc because
-# that has already been mounted):
-/sbin/mount -a -v -t nonfs,nosmbfs,noproc
-
-# Clean up some temporary files:
-( cd /var/log/setup/tmp && rm -rf * )
-/bin/rm -f /var/run/utmp /var/run/*pid /etc/nologin /var/run/lpd* \
-  /var/run/ppp* /etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot
-
-# Attempt to umount and remove any leftover /initrd:
-if [ -d /initrd ]; then
-  /sbin/umount /initrd 2> /dev/null
-  rmdir /initrd 2> /dev/null
-  blockdev --flushbufs /dev/ram0 2> /dev/null
-fi
-
-# Create a fresh utmp file:
-touch /var/run/utmp
-chown root.utmp /var/run/utmp
-chmod 664 /var/run/utmp
-
-if [ "$ROOTTYPE" = "umsdos" ]; then # we need to update any files added in DOS:
-  echo "Synchronizing UMSDOS directory structure:"
-  echo "  /sbin/umssync -r99 -v- /"
-  /sbin/umssync -r99 -v- /
-fi
-
-# Setup the /etc/motd to reflect the current kernel level:
-# THIS WIPES ANY CHANGES YOU MAKE TO /ETC/MOTD WITH EACH BOOT.
-# COMMENT THIS OUT IF YOU WANT TO MAKE A CUSTOM VERSION.
-echo "$(/bin/uname -sr)." > /etc/motd
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
-  . /etc/rc.d/rc.sysvinit
-fi
-
-# Run serial port setup script:
-# (CAREFUL! This can make some systems hang if the rc.serial script isn't
-# set up correctly. If this happens, you may have to edit the file from a
-# boot disk)
-#
-# . /etc/rc.d/rc.serial
-
-# Carry an entropy pool between reboots to improve randomness.
-if [ -f /etc/random-seed ]; then
-  echo "Using /etc/random-seed to initialize /dev/urandom."
-  cat /etc/random-seed > /dev/urandom
-fi
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-chmod 600 /etc/random-seed
-
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.httpd b/templates/vserver/vserver.d/etc/rc.d/rc.httpd
deleted file mode 100644
index 00b8837..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.httpd
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.httpd
-#
-# Start/stop/restart the Apache web server.
-#
-# To make Apache start automatically at boot, make this
-# file executable:  chmod 755 /etc/rc.d/rc.httpd
-#
-
-case "$1" in
-   'start')
-      /usr/sbin/apachectl start ;;
-   'stop')
-      /usr/sbin/apachectl stop ;;
-   'restart')
-      /usr/sbin/apachectl restart ;;
-   *)
-      echo "usage $0 start|stop|restart" ;;
-esac
-
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.inet2 b/templates/vserver/vserver.d/etc/rc.d/rc.inet2
deleted file mode 100755
index db56589..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.inet2
+++ /dev/null
@@ -1,129 +0,0 @@
-#!/bin/sh
-#
-# rc.inet2	This shell script boots up the entire network system.
-#		Note, that when this script is used to also fire
-#		up any important remote NFS disks (like the /usr
-#		directory), care must be taken to actually
-#		have all the needed binaries online _now_ ...
-#
-#               Uncomment or comment out sections depending on which
-#               services your site requires.
-#
-# Author:	Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-# Modified for Slackware by Patrick Volkerding <volkerdi@slackware.com>
-
-
-# At this point, we are ready to talk to The World...
-
-
-# Mount remote (NFS) filesystems:
-if cat /etc/fstab | grep -v '^#' | grep -w nfs 1> /dev/null 2> /dev/null ; then
-  # Start the RPC portmapper if we find NFS volumes defined in /etc/fstab,
-  # since it will need to be running in order to mount them.  If portmap
-  # is not running, attempting to mount an NFS partition will cause mount
-  # to hang.  Keep this in mind if you plan to mount unlisted partitions...
-  if [ -x /etc/rc.d/rc.portmap ]; then
-    . /etc/rc.d/rc.portmap start
-  else
-    # Warn about a possible NFS problem.  It's also possible to mount NFS partitions
-    # without rpc.portmap by using '-o nolock' (not a good idea in most cases).
-    echo "WARNING:  NFS partitions found in /etc/fstab, but /etc/rc.d/rc.portmap is"
-    echo "          not executable.  If you do not run portmap, NFS partitions will"
-    echo "          not mount properly.  To start rpc.portmap at boot, change the"
-    echo "          permissions on /etc/rc.d/rc.portmap:  chmod 755 /etc/rc.d/rc.portmap"
-    sleep 10
-  fi
-  echo "Mounting remote (NFS) file systems:  /sbin/mount -a -t nfs"
-  /sbin/mount -a -t nfs      	 # This may be our /usr runtime!
-  # Show the mounted volumes:
-  /sbin/mount -v -t nfs
-fi
-
-# Load the RPC portmapper if /etc/rc.d/rc.portmap is executable.
-# This might be needed to mount NFS partitions that are not listed in /etc/fstab.
-if [ -x /etc/rc.d/rc.portmap ]; then
-  . /etc/rc.d/rc.portmap start
-fi
-
-# Mount remote (SMB) filesystems:
-if cat /etc/fstab | grep -v '^#' | grep -w smbfs 1> /dev/null 2> /dev/null ; then
-  echo "Mounting remote (SMB) file systems:  /sbin/mount -a -t smbfs"
-  /sbin/mount -a -t smbfs
-  # Show the mounted volumes:
-  /sbin/mount -v -t smbfs
-fi
-
-# Start the system logger if it is not already running (maybe because /usr
-# is on a network partition).
-if [ -x /etc/rc.d/rc.syslog -a -d /var/log -a ! -r /var/run/syslogd.pid ]; then
-  . /etc/rc.d/rc.syslog start
-fi
-
-# If there is a firewall script, run it before enabling packet forwarding.
-# See the HOWTOs on http://www.netfilter.org/ for documentation on
-# setting up a firewall or NAT on Linux.  In some cases this might need to
-# be moved past the section below dealing with IP packet forwarding.
-if [ -x /etc/rc.d/rc.firewall ]; then
-  /etc/rc.d/rc.firewall start
-fi
-
-# Turn on IPv4 packet forwarding support.
-if [ -x /etc/rc.d/rc.ip_forward ]; then
-  . /etc/rc.d/rc.ip_forward start
-fi
-
-# Start the inetd server:
-if [ -x /etc/rc.d/rc.inetd ]; then
-  /etc/rc.d/rc.inetd start
-fi
-
-# Start the OpenSSH SSH daemon:
-if [ -x /etc/rc.d/rc.sshd ]; then
-  echo "Starting OpenSSH SSH daemon: /usr/sbin/sshd"
-  /etc/rc.d/rc.sshd start
-fi
-
-# Start the BIND name server daemon:
-if [ -x /etc/rc.d/rc.bind ]; then
-  /etc/rc.d/rc.bind start
-fi
-
-# Start NIS (the Network Information Service):
-if [ -x /etc/rc.d/rc.yp ]; then
-  . /etc/rc.d/rc.yp start
-fi
-
-# Start the NFS server.   Note that for this to work correctly, you'll
-# need to load the knfsd module for kernel NFS server support.
-# You'll also need to set up some shares in /etc/exports, and be sure
-# that /etc/rc.d/rc.portmap is executable.
-# Starting the NFS server:
-if [ -x /etc/rc.d/rc.nfsd ]; then
-  /etc/rc.d/rc.nfsd start
-fi
-
-# Stuff you won't need follows.  ;-)
-
-# # Start the network routing daemon:
-# if [ -x /usr/sbin/routed ]; then
-#   echo "Starting network routing daemon:  /usr/sbin/routed"
-#   /usr/sbin/routed -g -s
-# fi
-
-# # Start the system status server:
-# if [ -x /usr/sbin/rwhod ]; then
-#   echo "Starting system status server:  /usr/sbin/rwhod"
-#   /usr/sbin/rwhod
-# fi
-
-#  # Fire up the PC-NFS daemon(s).  This is a primarily obsolete system, and may
-#  # not be very secure.  It's not at all needed for normal NFS server support.
-#  # You probably should not run this.
-#  if [ -x /usr/sbin/rpc.pcnfsd ]; then
-#    echo "Starting PC-NFS daemons:  /usr/sbin/rpc.pcnfsd /usr/sbin/rpc.bwnfsd"
-#    /usr/sbin/rpc.pcnfsd /var/spool/lpd
-#  fi
-#  if [ -x /usr/sbin/rpc.bwnfsd ]; then
-#    /usr/sbin/rpc.bwnfsd /var/spool/lpd
-#  fi
-
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.inetd b/templates/vserver/vserver.d/etc/rc.d/rc.inetd
deleted file mode 100644
index 9fe1419..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.inetd
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-# Start/stop/restart inetd, the BSD Internet super-daemon.
-
-# Start inetd:
-inetd_start() {
-  if [ -x /usr/sbin/inetd ]; then
-    echo "Starting Internet super-server daemon:  /usr/sbin/inetd"
-    /usr/sbin/inetd
-  fi
-}
-
-# Stop inetd:
-inetd_stop() {
-  killall inetd
-}
-
-# Restart inetd:
-inetd_restart() {
-  inetd_stop
-  sleep 1
-  inetd_start
-}
-
-case "$1" in
-'start')
-  inetd_start
-  ;;
-'stop')
-  inetd_stop
-  ;;
-'restart')
-  inetd_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward b/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward
deleted file mode 100644
index 52bd2fe..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/sh
-# /etc/rc.d/rc.ip_forward:  start/stop IP packet forwarding
-#
-# If you intend to run your Linux box as a router, i.e. as a
-# computer that forwards and redistributes network packets, you
-# will need to enable IP packet forwarding in your kernel.
-#
-# To activate IP packet forwarding at boot time, make this
-# script executable:  chmod 755 /etc/rc.d/rc.ip_forward
-#
-# To disable IP packet forwarding at boot time, make this
-# script non-executable:  chmod 644 /etc/rc.d/rc.ip_forward
-
-# Start IP packet forwarding:
-ip_forward_start() {
-  if [ -f /proc/sys/net/ipv4/ip_forward ]; then
-    echo "Activating IPv4 packet forwarding."
-    echo 1 > /proc/sys/net/ipv4/ip_forward
-  fi
-  # When using IPv4 packet forwarding, you will also get the
-  # rp_filter, which automatically rejects incoming packets if the
-  # routing table entry for their source address doesn't match the
-  # network interface they're arriving on.  This has security
-  # advantages because it prevents the so-called IP spoofing,
-  # however it can pose problems if you use asymmetric routing
-  # (packets from you to a host take a different path than packets
-  # from that host to you) or if you operate a non-routing host
-  # which has several IP addresses on different interfaces.  To
-  # turn rp_filter off, uncomment the lines below:
-  #if [ -r /proc/sys/net/ipv4/conf/all/rp_filter ]; then
-  #  echo "Disabling rp_filter."
-  #  echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
-  #fi
-}
-
-# Stop IP packet forwarding:
-ip_forward_stop() {
-  if [ -f /proc/sys/net/ipv4/ip_forward ]; then
-    echo "Disabling IPv4 packet forwarding."
-    echo 0 > /proc/sys/net/ipv4/ip_forward
-  fi
-}
-
-# Restart IP packet forwarding:
-ip_forward_restart() {
-  ip_forward_stop
-  sleep 1
-  ip_forward_start
-}
-
-case "$1" in
-'start')
-  ip_forward_start
-  ;;
-'stop')
-  ip_forward_stop
-  ;;
-'restart')
-  ip_forward_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
-
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.local b/templates/vserver/vserver.d/etc/rc.d/rc.local
deleted file mode 100755
index 3cf2076..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.local
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.local:  Local system initialization script.
-#
-# Put any local setup commands in here:
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.mysqld b/templates/vserver/vserver.d/etc/rc.d/rc.mysqld
deleted file mode 100644
index 239e2e6..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.mysqld
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/sh
-# Start/stop/restart mysqld.
-#
-# Copyright 2003 Patrick J. Volkerding, Concord, CA
-# Copyright 2003 Slackware Linux, Inc., Concord, CA
-#
-# This program comes with NO WARRANTY, to the extent permitted by law.
-# You may redistribute copies of this program under the terms of the
-# GNU General Public License.
-
-# To start MySQL automatically at boot, be sure this script is executable:
-# chmod 755 /etc/rc.d/rc.mysqld
-
-# Before you can run MySQL, you must have a database.  To install an initial
-# database, do this as root:
-#
-#   su - mysql
-#   mysql_install_db
-#
-# Note that step one is becoming the mysql user.  It's important to do this
-# before making any changes to the database, or mysqld won't be able to write
-# to it later (this can be fixed with 'chown -R mysql.mysql /var/lib/mysql').
-
-# To disallow outside connections to the database (if you don't need them, this
-# is recommended to increase security), uncomment the next line:
-#SKIP="--skip-networking"
-
-# Start mysqld:
-mysqld_start() {
-  if [ -x /usr/bin/mysqld_safe ]; then
-    # If there is an old PID file (no mysqld running), clean it up:
-    if [ -r /var/run/mysql/mysql.pid ]; then
-      if ! ps ax | grep mysqld 1> /dev/null 2> /dev/null ; then
-        echo "Cleaning up old /var/run/mysql/mysql.pid."
-        rm -f /var/run/mysql/mysql.pid
-      fi
-    fi
-    /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid $SKIP &
-  fi
-}
-
-# Stop mysqld:
-mysqld_stop() {
-  # If there is no PID file, ignore this request...
-  if [ -r /var/run/mysql/mysql.pid ]; then
-    killall mysqld
-    # Wait at least one minute for it to exit, as we don't know how big the DB is...
-    for second in 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 \
-      0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 60 ; do
-      if [ ! -r /var/run/mysql/mysql.pid ]; then
-        break;
-      fi
-      sleep 1
-    done
-    if [ "$second" = "60" ]; then
-      echo "WARNING:  Gave up waiting for mysqld to exit!"
-      sleep 15
-    fi
-  fi
-}
-
-# Restart mysqld:
-mysqld_restart() {
-  mysqld_stop
-  mysqld_start
-}
-
-case "$1" in
-'start')
-  mysqld_start
-  ;;
-'stop')
-  mysqld_stop
-  ;;
-'restart')
-  mysqld_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.postfix b/templates/vserver/vserver.d/etc/rc.d/rc.postfix
deleted file mode 100644
index bc32367..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.postfix
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh
-#
-## Slackware init script for postfix
-##   20030828 Manolis Tzanidakis
-#
-
-postfix_start() {
-        if [ -x /usr/sbin/postfix ]; then
-                echo -n "Starting postfix MTA:  "
-                echo "/usr/sbin/postfix start"
-                /usr/sbin/postfix start 2>/dev/null
-        fi
-}
-
-postfix_stop() {
-        /usr/sbin/postfix stop 2>/dev/null
-}
-
-postfix_restart() {
-        sh $0 stop
-	sleep 1
-        sh $0 start
-}
-
-postfix_reload() {
-        /usr/sbin/postfix reload 2>/dev/null
-}
-
-case "$1" in
-        'start')
-                postfix_start
-                ;;
-        'stop')
-                postfix_stop
-                ;;
-        'restart')
-                postfix_restart
-                ;;
-        'reload')
-                postfix_reload
-                ;;
-        *)
-                echo "usage $0 start|stop|restart|reload"
-esac
-
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.sendmail b/templates/vserver/vserver.d/etc/rc.d/rc.sendmail
deleted file mode 100644
index 1a31c52..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.sendmail
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-# Start/stop/restart sendmail.
-
-# Start sendmail:
-sendmail_start() {
-  if [ -x /usr/sbin/sendmail ]; then
-    echo "Starting sendmail MTA daemon: /usr/sbin/sendmail -L sm-mta -bd -q25m"
-    /usr/sbin/sendmail -L sm-mta -bd -q25m
-    echo "Starting sendmail MSP queue runner: /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m"
-    /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m
-  fi
-}
-
-# Stop sendmail:
-sendmail_stop() {
-  killall sendmail
-}
-
-# Restart sendmail:
-sendmail_restart() {
-  sendmail_stop
-  sleep 1
-  sendmail_start
-}
-
-case "$1" in
-'start')
-  sendmail_start
-  ;;
-'stop')
-  sendmail_stop
-  ;;
-'restart')
-  sendmail_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.serial b/templates/vserver/vserver.d/etc/rc.d/rc.serial
deleted file mode 100755
index 5f31c01..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.serial
+++ /dev/null
@@ -1,132 +0,0 @@
-#
-# /etc/rc.serial 
-#	Initializes the serial ports on your system
-#
-# chkconfig: 2345 50 75
-# description: This initializes the settings of the serial port
-#
-# FILE_VERSION: 19981128
-#
-# Distributed with setserial and the serial driver.  We need to use the
-# FILE_VERSION field to assure that we don't overwrite a newer rc.serial 
-# file with a newer one.
-# 
-# XXXX For now, the autosave feature doesn't work if you are
-# using the multiport feature; it doesn't save the multiport configuration
-# (for now).  Autosave also doesn't work for the hayes devices.  
-#
-
-RCLOCKFILE=/var/lock/subsys/serial
-DIRS="/lib/modules/`uname -r`/misc /lib/modules /usr/lib/modules ."
-PATH=/bin:/sbin:/usr/bin
-DRIVER=serial
-DRIVER_NAME=serial
-MODULE_REGEXP="serial\b"
-
-ALLDEVS="/dev/ttyS?"
-if /bin/ls /dev/ttyS?? >& /dev/null ; then
-	ALLDEVS="$ALLDEVS /dev/ttyS??"
-fi
-
-SETSERIAL=""
-if test -x /bin/setserial ; then
-	SETSERIAL=/bin/setserial
-elif test -x /sbin/setserial ; then
-	SETSERIAL=/sbin/setserial
-fi
-
-#
-# See if the serial driver is loaded
-#
-LOADED=""
-if test -f /proc/devices; then
-	if grep -q " ttyS$" /proc/devices ; then
-		LOADED="yes"
-	else
-		LOADED="no"
-	fi
-fi
-
-#
-# Find the serial driver
-#
-for i in $DIRS
-do
-	if test -z "$MODULE" -a -f $i/$DRIVER.o ; then
-		MODULE=$i/$DRIVER.o
-	fi
-done
-
-if ! test -f /proc/modules ; then
-	MODULE=""
-fi
-
-#
-# Handle System V init conventions...
-#
-case $1 in
-start)
-	action="start";
-	;;
-stop)
-	action="stop";
-	;;
-*)
-	action="start";
-esac
-
-if test $action  = stop ; then
-	if test -n ${SETSERIAL} -a "$LOADED" != "no" -a \
-           `head -1 /etc/serial.conf`X = "###AUTOSAVE###X" ; then
-		echo -n "Saving state of serial devices... "
-		grep "^#" /etc/serial.conf > /etc/.serial.conf.new
-		${SETSERIAL} -G -g ${ALLDEVS} >> /etc/.serial.conf.new
-		mv /etc/serial.conf /etc/.serial.conf.old
-		mv /etc/.serial.conf.new /etc/serial.conf
-		echo "done."
-	fi
-	if test -n "$MODULE" ; then
-		module=`grep $MODULE_REGEXP /proc/modules | awk '{print $1}'`
-		if test -z "$module" ; then 
-			echo "The $DRIVER_NAME driver is not loaded."
-			rm -f ${RCLOCKFILE}
-			exit 0
-		fi
-		if rmmod $module ; then :; else 
-			echo "The $DRIVER_NAME driver could NOT be unloaded."
-			exit 1;
-		fi
-		echo "The $DRIVER_NAME driver has been unloaded."
-	fi
-	rm -f ${RCLOCKFILE}
-	exit 0
-fi
-
-#
-# If not stop, it must be a start....
-#
-
-if test -n "$MODULE" -a "$LOADED" != "yes" ; then 
-	if insmod -f $MODULE $DRIVER_ARG ; then
-          true
-	else
-		echo "Couldn't load $DRIVER_NAME driver."
-		exit 1
-	fi
-fi
-
-if test -f /etc/serial.conf ; then
-        if test -n ${SETSERIAL} ; then
-		grep -v ^# < /etc/serial.conf | while read device args
-		do
-                    if [ ! "$device" = "" -a ! "$args" = "" ]; then
-                        ${SETSERIAL} -z $device $args
-                    fi
-		done 
-	fi
-else
-	echo "###AUTOSAVE###" > /etc/serial.conf
-fi
-
-touch ${RCLOCKFILE}
-${SETSERIAL} -bg ${ALLDEVS}
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.sshd b/templates/vserver/vserver.d/etc/rc.d/rc.sshd
deleted file mode 100755
index a3707e3..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.sshd
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/sh
-# Start/stop/restart the secure shell server:
-
-sshd_start() {
-  # Create host keys if needed.
-  if [ ! -r /etc/ssh/ssh_host_key ]; then
-    /usr/bin/ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N '' 
-  fi
-  if [ ! -f /etc/ssh/ssh_host_dsa_key ]; then
-    /usr/bin/ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N ''
-  fi
-  if [ ! -f /etc/ssh/ssh_host_rsa_key ]; then
-    /usr/bin/ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N ''
-  fi
-  /usr/sbin/sshd
-}
-
-sshd_stop() {
-  killall sshd
-}
-
-sshd_restart() {
-  if [ -r /var/run/sshd.pid ]; then
-    echo "WARNING: killing listener process only.  To kill every sshd process, you must"
-    echo "         use 'rc.sshd stop'.  'rc.sshd restart' kills only the parent sshd to"
-    echo "         allow an admin logged in through sshd to use 'rc.sshd restart' without"
-    echo "         being cut off.  If sshd has been upgraded, new connections will now"
-    echo "         use the new version, which should be a safe enough approach."
-    kill `cat /var/run/sshd.pid`
-  else
-    killall sshd
-  fi
-  sleep 1
-  sshd_start
-}
-
-case "$1" in
-'start')
-  sshd_start
-  ;;
-'stop')
-  sshd_stop
-  ;;
-'restart')
-  sshd_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
-
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.syslog b/templates/vserver/vserver.d/etc/rc.d/rc.syslog
deleted file mode 100755
index a005fb7..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.syslog
+++ /dev/null
@@ -1,42 +0,0 @@
-#!/bin/sh
-# Start/stop/restart the system logging daemons.
-#
-# Written for Slackware Linux by Patrick J. Volkerding <volkerdi@slackware.com>.
-
-syslogd_start() {
-  if [ -x /usr/sbin/syslogd -a -x /usr/sbin/klogd ]; then
-    echo -n "Starting sysklogd daemons: "
-    echo -n "/usr/sbin/syslogd "
-    /usr/sbin/syslogd
-    sleep 1 # prevent syslogd/klogd race condition on SMP kernels
-    echo "/usr/sbin/klogd -c 3 -x"
-    # '-c 3' = display level 'error' or higher messages on console
-    # '-x' = turn off broken EIP translation
-    /usr/sbin/klogd -c 3 -x
-  fi
-}
-
-syslogd_stop() {
-  killall syslogd 2> /dev/null
-  killall klogd 2> /dev/null
-}
-
-syslogd_restart() {
-  syslogd_stop
-  sleep 1
-  syslogd_start
-}
-
-case "$1" in
-'start')
-  syslogd_start
-  ;;
-'stop')
-  syslogd_stop
-  ;;
-'restart')
-  syslogd_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
diff --git a/templates/vserver/vserver.d/etc/rc.d/rc.sysvinit b/templates/vserver/vserver.d/etc/rc.d/rc.sysvinit
deleted file mode 100755
index 916e59e..0000000
--- a/templates/vserver/vserver.d/etc/rc.d/rc.sysvinit
+++ /dev/null
@@ -1,58 +0,0 @@
-#!/bin/sh
-#
-# rc.sysvinit   This file provides basic compatibility with SystemV style
-#               startup scripts.  The SystemV style init system places 
-#               start/stop scripts for each runlevel into directories such as
-#               /etc/rc.d/rc3.d/ (for runlevel 3) instead of starting them
-#               from /etc/rc.d/rc.M.  This makes for a lot more init scripts,
-#               and a more complicated execution path to follow through if
-#               something goes wrong.  For this reason, Slackware has always
-#               used the traditional BSD style init script layout.
-#
-#               However, many binary packages exist that install SystemV
-#               init scripts.  With rc.sysvinit in place, most well-written
-#               startup scripts will work.  This is primarily intended to
-#               support commercial software, though, and probably shouldn't
-#               be considered bug free.
-#
-#               Written by Patrick Volkerding <volkerdi@slackware.com>, 1999
-#               from an example by Miquel van Smoorenburg <miquels@cistron.nl>.
-
-# Run an init script:
-startup() {
-  case "$1" in
-  *.sh)
-    sh "$@"
-    ;;
-  *)
-    "$@"
-    ;;
-  esac
-}
-
-# Set onlcr to avoid staircase effect.
-stty onlcr 0>&1
-
-if [ "$runlevel" = "" ]; then
-  runlevel=$RUNLEVEL
-  export runlevel
-  prevlevel=$PREVLEVEL
-  export prevlevel
-fi
-
-# Run kill scripts in the previous runlevel if not "none"
-if [ ! "$prevlevel" = "N" ]; then
-  for script in /etc/rc.d/rc$prevlevel.d/K* ; do
-    if [ -x $script ]; then
-      startup $script stop
-    fi
-  done
-fi
-
-# Now do the startup scripts:
-for script in /etc/rc.d/rc$runlevel.d/S* ; do
-  if [ -x $script ]; then
-    startup $script start
-  fi
-done
-
diff --git a/templates/vserver/vserver.d/etc/rssh.conf b/templates/vserver/vserver.d/etc/rssh.conf
deleted file mode 100644
index a74acc6..0000000
--- a/templates/vserver/vserver.d/etc/rssh.conf
+++ /dev/null
@@ -1,48 +0,0 @@
-# This is the default rssh config file
-
-# set the log facility.  "LOG_USER" and "user" are equivalent.
-logfacility = LOG_USER 
-
-# Leave these all commented out to make the default action for rssh to lock
-# users out completely...
-
-allowscp
-allowsftp
-#allowcvs
-#allowrdist
-#allowrsync
-
-# set the default umask
-umask = 022
-
-# If you want to chroot users, use this to set the directory where the root of
-# the chroot jail will be located.
-#
-# if you DO NOT want to chroot users, LEAVE THIS COMMENTED OUT.
-# You can quote anywhere, but quotes not required unless path contains a
-# space... as in this example.
-
-chrootpath = "/var/users"
-
-##########################################
-# EXAMPLES of configuring per-user options
-
-#user=rudy:077:00010:  # the path can simply be left out to not chroot
-#user=rudy:077:00010   # the ending colon is optional
-
-#spaces in the path must be quoted...
-#user=rudy:011:00001:"/usr/local/chroot dir"  # scp with chroot
-#user=rudy:011:00010:"/usr/local/chroot dir"  # sftp with chroot
-#user=rudy:011:00011:"/usr/local/chroot dir"  # both with chroot
-#user=rudy:011:00100:  # cvs, with no chroot 
-#user=rudy:011:01000:  # rdist, with no chroot
-#user=rudy:011:10000:  # rsync, with no chroot
-#user="rudy:011:00001:/usr/local/chroot"  # whole user string can be quoted
-#user=rudy:01"1:00001:/usr/local/chroot"  # or somewhere in the middle, freak!
-#user=rudy:'011:00001:/usr/local/chroot'  # single quotes too
-
-# Spaces before or after the '=' are fine, but spaces in chrootpath need
-# quotes.
-#user = "rudy:011:00001:/usr/local/chroot dir"  
-#user = "rudy:011:00001:/usr/local/chroot dir"  # neither do comments at line end
-
diff --git a/templates/vserver/vserver.d/etc/ssh/sshd_config b/templates/vserver/vserver.d/etc/ssh/sshd_config
deleted file mode 100644
index a161fec..0000000
--- a/templates/vserver/vserver.d/etc/ssh/sshd_config
+++ /dev/null
@@ -1,103 +0,0 @@
-#	$OpenBSD: sshd_config,v 1.69 2004/05/23 23:59:53 dtucker Exp $
-
-# This is the sshd server system-wide configuration file.  See
-# sshd_config(5) for more information.
-
-# This sshd was compiled with PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
-
-# The strategy used for options in the default sshd_config shipped with
-# OpenSSH is to specify options with their default value where
-# possible, but leave them commented.  Uncommented options change a
-# default value.
-
-#Port 22
-#Protocol 2,1
-#ListenAddress 0.0.0.0
-#ListenAddress ::
-
-# HostKey for protocol version 1
-#HostKey /etc/ssh/ssh_host_key
-# HostKeys for protocol version 2
-#HostKey /etc/ssh/ssh_host_rsa_key
-#HostKey /etc/ssh/ssh_host_dsa_key
-
-# Lifetime and size of ephemeral version 1 server key
-#KeyRegenerationInterval 1h
-#ServerKeyBits 768
-
-# Logging
-#obsoletes QuietMode and FascistLogging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2m
-PermitRootLogin no
-#StrictModes yes
-#MaxAuthTries 6
-
-#RSAAuthentication yes
-#PubkeyAuthentication yes
-#AuthorizedKeysFile	.ssh/authorized_keys
-
-# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#RhostsRSAAuthentication no
-# similar for protocol version 2
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# RhostsRSAAuthentication and HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-#PasswordAuthentication yes
-#PermitEmptyPasswords no
-
-# Change to no to disable s/key passwords
-#ChallengeResponseAuthentication yes
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-
-# Set this to 'yes' to enable PAM authentication, account processing, 
-# and session processing. If this is enabled, PAM authentication will 
-# be allowed through the ChallengeResponseAuthentication mechanism. 
-# Depending on your PAM configuration, this may bypass the setting of 
-# PasswordAuthentication, PermitEmptyPasswords, and 
-# "PermitRootLogin without-password". If you just want the PAM account and 
-# session checks to run without PAM authentication, then enable this but set 
-# ChallengeResponseAuthentication=no
-#UsePAM no
-
-#AllowTcpForwarding yes
-#GatewayPorts no
-#X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PrintMotd yes
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#UsePrivilegeSeparation yes
-#PermitUserEnvironment no
-#Compression yes
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS yes
-#PidFile /var/run/sshd.pid
-#MaxStartups 10
-
-# no default banner path
-#Banner /some/path
-
-# override default of no subsystems
-Subsystem	sftp	/usr/libexec/sftp-server
diff --git a/templates/vserver/vserver.d/var/www/htdocs/missing.html b/templates/vserver/vserver.d/var/www/htdocs/missing.html
deleted file mode 100644
index b2eec17..0000000
--- a/templates/vserver/vserver.d/var/www/htdocs/missing.html
+++ /dev/null
@@ -1,12 +0,0 @@
-<html>
-<head>
-<title>404 - Not Found</title>
-</head>
-<body>
-  <center>
-  <pre>
-  O endere&ccedil;o que voc&ecirc; requisitou n&atilde;o p&ocirc;de ser encontrado :(
-  </pre>
-  </center>
-</body>
-</html>
diff --git a/templates/vserver/vserver.d/var/www/missing.html b/templates/vserver/vserver.d/var/www/missing.html
deleted file mode 100644
index b2eec17..0000000
--- a/templates/vserver/vserver.d/var/www/missing.html
+++ /dev/null
@@ -1,12 +0,0 @@
-<html>
-<head>
-<title>404 - Not Found</title>
-</head>
-<body>
-  <center>
-  <pre>
-  O endere&ccedil;o que voc&ecirc; requisitou n&atilde;o p&ocirc;de ser encontrado :(
-  </pre>
-  </center>
-</body>
-</html>
diff --git a/templates/vserver/vserver.s/GPG-KEY b/templates/vserver/vserver.s/GPG-KEY
deleted file mode 100644
index fd23e95..0000000
--- a/templates/vserver/vserver.s/GPG-KEY
+++ /dev/null
@@ -1,88 +0,0 @@
-security@slackware.com public key
-
-Type  bits/keyID    Date       User ID
-pub  1024D/40102233 2003-02-26 Slackware Linux Project <security@slackware.com>
-sub  1024g/4E523569 2003-02-26 [expires: 2012-12-21]
-
------BEGIN PGP PUBLIC KEY BLOCK-----
-Version: GnuPG v1.2.1 (GNU/Linux)
-
-mQGiBD5dIFQRBADB31WinbXdaGk/8RNkpnZclu1w3Xmd5ItACDLB2FhOhArw35EA
-MOYzxI0gRtDNWN4pn9n74q4HbFzyRWElThWRtBTYLEpImzrk7HYVCjMxjw5A0fTr
-88aiHOth5aS0vPAoq+3TYn6JDSipf2bR03G2JVwgj3Iu066pX4naivNm8wCgldHG
-F3y9vT3UPYh3QFgEUlCalt0D/3n6NopRYy0hMN6BPu+NarXwv6NQ9g0GV5FNjEEr
-igkrD/htqCyWAUl8zyCKKUFZZx4UGBRZ5guCdNzwgYH3yn3aVMhJYQ6tcSlLsj3f
-JIz4LAZ3+rI77rbn7gHHdp7CSAuV+QHv3aNanUD/KGz5SPSvF4w+5qRM4PfPNT1h
-LMV8BACzxiyX7vzeE4ZxNYvcuCtv0mvEHl9yD66NFA35RvXaO0QiRVYeoUa5JOQZ
-gwq+fIB0zgsEYDhXFkC1hM/QL4NccMRk8C09nFn4eiz4dAEnwKt4rLCJKhkLl1DW
-TSoXHe/dOXaLnFyLzB1J8hEYmUvw3SwPt//wMqDiVBLeZfFcdLQwU2xhY2t3YXJl
-IExpbnV4IFByb2plY3QgPHNlY3VyaXR5QHNsYWNrd2FyZS5jb20+iF8EExECAB8F
-Aj5dIFQFCRJ3owAECwcDAgMVAgMDFgIBAh4BAheAAAoJEGpEY8BAECIzee0An3My
-boalJ5nLePD0HCzMuf8Ix8gPAJ9lnU1wqNVGza0t89ACTurDoppQ2rkBDQQ+XSBV
-EAQA3VYlpPyRKdOKoM6t1SwNG0YgVFSvxy/eiratBf7misDBsJeH86Pf8H9OfVHO
-cqscLiC+iqvDgqeTUX9vASjlnvcoS/3H5TDPlxiifIDggqd2euNtJ8+lyXRBV6yP
-sBIA6zki9cR4zphe48hKpSsDfj7uL5sfyc2UmKKboSu3x7cAAwUD/1jmoLQs9bIt
-bTosoy+5+Uzrl0ShRlv+iZV8RPzAMFuRJNxUJkUmmThowtXRaPKFI9AVd+pP44aA
-J+zxCPtS2isiW20AxubJoBPpXcVatJWi4sG+TM5Z5VRoLg7tIDNVWsyHGXPAhIG2
-Y8Z1kyWwb4P8A/W2b1ZCqS7Fx4yEhTikiEwEGBECAAwFAj5dIFUFCRJ3owAACgkQ
-akRjwEAQIjM1uwCdE7V4mPCqdby/nV699NxKX0iW/OsAniaVhEip8Ptff74Sv4JV
-tb+Sth2l
-=H5uu
------END PGP PUBLIC KEY BLOCK-----
-
-slamd64 public key
-
------BEGIN PGP PUBLIC KEY BLOCK-----
-Version: GnuPG v1.2.6 (GNU/Linux)
-
-mQGiBELKSBYRBACiElxGMXqxUwdsQBKPngV6/k0Q5AYT34+WLL0B7XRR9kOotCfc
-PTLCP5qLM9etpzKhbMbgWGpaBrA/3KEPOJ7JVhk6JcLgjoi0QsMusaI4BGnmrxkw
-3mh9xPwc+jPgiYOljbZhNG6FMQtrdlKYV+BmwS8mt/YBymShghtlgdHJjwCg/PAG
-YJDsfoG1ebuwcjYlsGoD2x0EAJX7UnTdxxESvmIuk172MunZqw+o8+o/W684z13/
-wOkcVqvuAcd0ejuY0z09GFfyhtig8E55UcKNyVC50+3aJUXlt9//HnENHZo+OEN1
-ezbOXUcJIw8xkU551qaxubqWXtKYEJP9z/khVPe4N0JW2vWOcAFYhuOEx1ylaNrX
-gUY4BACDpn+pntq0ooZqkSPT4v1ibOQg/3xh2F1PgsnOahMRrXbVEdL9ItsVnHM/
-ygHBjLhkEMd612nVVSw1BYMBAwQbsYB8Lgn1QxXl0ISBYR1RYW1LvyaJM6A6TDL+
-EdWp+iTtlKOe/VD+oCfHmMONoucZJM2AtK1vXTX3x4Wb4MgVdLQoRnJlZGVyaWNr
-IEVtbW90dCA8bWFpbEBmcmVkZW1tb3R0LmNvLnVrPohkBBMRAgAkBQJCykgWAhsD
-BQkDwmcABgsJCAcDAgMVAgMDFgIBAh4BAheAAAoJEAd5Da1T/acLGfIAoOqIHrg4
-r2pq/tKi9VifOJS1xg4LAKDpi0I0pzsdDJ2owxCQ88MkoSDKgohMBBARAgAMBQJD
-Ed/tBYMDes8pAAoJEFgpV1AFAIOLprQAnRDVVmDPnzVNOWrZ8D55gG2bOwkxAKCl
-dGThnu0aQ0IEL7MgUETGtk4hS4iiBBABAgAMBQJDEdpDBYMDetTTAAoJEJugaRW/
-hasxqCwEAKczPTgOrRXXTs4piB14DayJQVgoqVgiNfKzd5qVuvQgYebQrMu7hi5U
-0q/n6TbQpjmMDZKxhXhEY1gs32mtzKKDrerTpF+pJAgQVvBLZS2mF4HbVnU74GvL
-2UKJtEtgb9u+i1Efd4Q8GIJUzLLJifURQWTk1e3B9qGApKXpWJlviEwEEBECAAwF
-AkMR75MFgwN6v4MACgkQTqjEwhXvPN1j7gCbBXZs9MM6YXGI/yTlEhiXyTECxm8A
-nj6O1XszSa5kaD7CvnRFzNkm5O5MiEwEEBECAAwFAkMR79UFgwN6v0EACgkQoLYC
-8AehV8eLBQCgv8WEdBtFjTh3Wl06WK5dKCw0nHsAn0IIHRbJC5jO4NWrIpupBMnz
-3fBsiEwEExECAAwFAkMR9ggFgwN6uQ4ACgkQR+ny47i1wzAfZQCfRACyfYBxs+tu
-6OzpLP2DGjEaa1UAnj4MVMH32f/34oN6o9dPKPT8HXWziEwEExECAAwFAkMR9vcF
-gwN6uB8ACgkQB0u7y43syeIaogCfVy7lqRjRDbttJs1u1g3FekdbJ1kAnRo726tA
-u8Xf+JWD3OrmMo0Uup3giEwEEBECAAwFAkMR+qgFgwN6tG4ACgkQfWXW5We1ioQk
-tgCePGa3NpcfEWb8drmO95Mp1C+FaBIAoNEqA89xUvTIpqooucTzFxgAupVgiEwE
-EBECAAwFAkMSF+UFgwN6lzEACgkQ/lREvmcCFhscDQCgnMxf4Nmu3B41GWupTWxb
-9b+te5sAoIiTZHzOSKtqN4cJ2i22iP/vZPt4iEwEEBECAAwFAkMULeAFgwN4gTYA
-CgkQsxZ93p+gHn6bcACgwY/5ZpvvEK+eycM5XNQhVI6w4j8An0JoXlFaGStIzUmW
-42obaW6CG4WViEYEExECAAYFAkMUZuAACgkQGnR+RTDgudhG1QCeJelEhnX/3JeW
-S5BaM7640suSeLQAnA2RDMH4zIJLI4MWEXBAvaA0lSr7iEwEEBECAAwFAkMUP8gF
-gwN4b04ACgkQM/XwBW70U1iAOwCgmah/GnZikIhyeFr6KsKpsmZCQTQAn3Vs7JZm
-w4qBLiI+RXxw7vIJlI4AiEwEEBECAAwFAkMUZ9EFgwN4R0UACgkQ72KcVAmwbhAC
-FACgiNqao9mzAWZBjIY7iiqz34gbK/QAn34F1bLAb0sHKiSUcFkVi/uZ8R0viEwE
-EBECAAwFAkMWFj8FgwN2mNcACgkQn3j4POjENGF+UgCeM+mEKW5+MjNN17QCAvZi
-cBVJEHMAn14YyvdSIwBBFUNPWYOw7GwYyAhHiEwEEBECAAwFAkMXW0cFgwN1U88A
-CgkQTxqZjtpq5iG4PwCfe2ymOYh5t+bEZGGCtJg3sWJ5hHYAmQGS+jGWcTMlXSe+
-65o/aPfLUkMQuQINBELKSCgQCADjG+pX7C0sRIkX1QQ6lFW3IrajWypXtd4jO1TA
-dlLFES7OxF202V15+TRtL9NO34x7u6RPTnF7wi/i2U1dqM9ZjrFcTJA17Y7+OLH+
-yw64/5OJapUi48qI7hnLRTPykz0c+b92pUt1X/BIWmf301jbZ0AbFZV4yvm1OUH4
-wrGLLFeATjiBWTcJarRiR89DzQ/Cm+c791WXdIhEvv5Vp4/d8HzGZhEUVKTCoA3e
-Z8ZIdJoy/d7FYfyeg836UDXEqr598n2p9DxMwkRj5oHINB64CrQuKr7zDdP8Zv2g
-vKkjeS4mN+07saWK3UTY5ADByNVHSu+P0LZYPhxjze7KOVjHAAUTCACa5ohR/7/N
-x2M2OB9VPAwQPjAFNst6fPotcFLDy5Q/jlbBcDNf1OdzgkE/06z7iPGRmIJL6flz
-QZH+hYwDqjulVVtPQXiZMVGvlfC9YIAdJX/1Ca2L9mL4c4IBQbFNkSlgkLaPTwUJ
-BD2PnA+q+ERy39UANhIR/LVGltK1krDds8CwbxMSYNFvFgf4dmh6GzI5ioByDoTM
-8ShfS2GjAekviNVLsGC5UWKuQl/XVaC/j7CTAT7WbikfXWI2uonFBx47vjf2UaPa
-E0HnAVwDY0cAZeaObpDKvyogsf8H4CzK9JCKtW9aTUpKurEpyHfcKqB07GMLC/+Q
-QiA3bFmrSaTRiE8EGBECAA8FAkLKSCgCGwwFCQPCZwAACgkQB3kNrVP9pwsejwCg
-gaQm6lU/H7ja0EUaJJFZnRoqRvAAnRK8CC4PIr/ZYDjd+aeS3R31FjGr
-=D1wm
------END PGP PUBLIC KEY BLOCK-----
diff --git a/templates/vserver/vserver.s/devices.tar.gz b/templates/vserver/vserver.s/devices.tar.gz
deleted file mode 100644
index dc4aea6..0000000
--- a/templates/vserver/vserver.s/devices.tar.gz
+++ /dev/null
diff --git a/templates/vserver/vserver.s/vserver.sh b/templates/vserver/vserver.s/vserver.sh
deleted file mode 100644
index e9d68a9..0000000
--- a/templates/vserver/vserver.s/vserver.sh
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/bash
-#
-# vserver template script
-#
-
-BASE="/etc/simplepkg/templates/vserver/vserver.s"
-DEVICES="$BASE/devices.tar.gz"
-GPGKEY="$BASE/GPG-KEY"
-
-if [ -z "$2" ]; then
-  echo "usage: `basename $0` <jail-root> <jail-name>"
-  exit 1
-elif [ ! -d "$1/$2" ]; then
-  echo "folder $1/$2 does not exist"
-  exit 1
-fi
-
-echo "creating /etc/vservers/$2..."
-mv $1/$2 $1/$2.old
-vserver $2 build -m skeleton --force &> /dev/null
-result="$?"
-rm -rf $1/$2 && mv $1/$2.old $1/$2 
-
-if [ "$result" != "0" ]; then
-  mkdir -p /etc/vservers/$2/apps/init
-fi
-
-echo sysv > /etc/vservers/$2/apps/init/style
-echo 3 > /etc/vservers/$2/apps/init/runlevel.start
-echo 6 > /etc/vservers/$2/apps/init/runlevel.stop
-
-cp /etc/resolv.conf $1/$2/etc/
-cp /etc/localtime $1/$2/etc/
-echo /dev/hdv1 / ext2 defaults 1 1 > $1/$2/etc/fstab                                                           
-echo /dev/hdv1 / ext2 rw 0 0 > $1/$2/etc/mtab                                                                  
-
-echo "creating devices and dependencies..."
-if [ -f "$DEVICES" ]; then
-  cd $1/$2/
-  tar zxvf $DEVICES
-  chroot $1/$2/ sbin/ldconfig
-else
-  echo error: device template $DEVICES not found
-fi
-
-if [ -f "$GPGKEY" ]; then
-  echo "importing slack gpg pubkey"                                                                                  
-  mkdir $1/$2/root/.gnupg                                                                                        
-  gpg --homedir $1/$2/root/.gnupg --import $GPGKEY
-fi
-
-# todo: add rebootmgr
-echo "done; now config your vserver at /etc/vservers/$2"
-echo "then, set all desired iptables rules and other stuff and then start $server vserver"
-echo "dont forget to change root's password with the command "vserver $2 exec passwd"" 
diff --git a/templates/vserver/vserver.template b/templates/vserver/vserver.template
deleted file mode 100644
index 0cd1f69..0000000
--- a/templates/vserver/vserver.template
+++ /dev/null
@@ -1,250 +0,0 @@
-# This is a Slackware Installation Tagfile.
-# 
-# This one comes from disk: A1 (Base Linux series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-aaa_base: ADD
-aaa_elflibs: ADD
-bash: ADD
-bin: ADD
-bzip2: ADD
-coreutils: ADD
-cxxlibs: ADD
-dcron: ADD
-elvis: ADD
-etc: ADD
-findutils: ADD
-gawk: ADD
-gettext: REC
-grep: ADD
-gzip: ADD
-infozip: ADD
-less: ADD
-logrotate: ADD
-openssl-solibs: ADD
-pkgtools: ADD
-procps: ADD
-sed: ADD
-shadow: ADD
-slocate: ADD
-sysklogd: ADD
-sysvinit: ADD
-tar: ADD
-util-linux: ADD
-# This is a Slackware Installation Tagfile.
-#           
-# This one comes from disk: AP1 (Applications series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-bc: OPT
-diffutils: REC
-jed: OPT
-joe: OPT
-jove: OPT
-lsof: OPT
-mysql: OPT
-sudo: OPT
-glibc: REC
-# Tagfile for emacs series
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: F1 (Frequently Asked Questions)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-libidn: REC
-libxml2: REC
-mhash: REC
-# This is a Slackware Installation Tagfile.
-#           
-# This one comes from the N (Network/UUCP/Mail/News) series.
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-# 
-#
-apache: OPT
-curl: OPT
-gnupg: OPT
-inetd: REC
-lftp: OPT
-lynx: OPT
-mod_ssl: OPT
-mailx: REC
-openssh: REC
-openssl: REC
-php: OPT
-rsync: OPT
-stunnel: OPT
-tcpip: REC
-wget: OPT
-# This is a Slackware Installation Tagfile.
-#           
-# This one comes from disk: TCL1 (Tcl/Tk series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: Y1 (Yaaaaaahhoooo? Games and Amusements).
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-# extra
-# libsafe
-# contrib
-simplepkg
-ssmtp