aboutsummaryrefslogtreecommitdiff
path: root/branches
diff options
context:
space:
mode:
Diffstat (limited to 'branches')
-rw-r--r--branches/0.6/README2
-rw-r--r--branches/0.6/conf/repos.conf.new41
-rw-r--r--branches/0.6/conf/simplepkg.conf.new154
-rw-r--r--branches/0.6/doc/CHANGELOG389
-rw-r--r--branches/0.6/doc/COPYING340
-rw-r--r--branches/0.6/doc/README258
-rw-r--r--branches/0.6/doc/README.pt_BR254
-rw-r--r--branches/0.6/doc/README.simplaret143
-rw-r--r--branches/0.6/doc/README.simplaret.pt_BR148
-rw-r--r--branches/0.6/doc/TODO5
-rw-r--r--branches/0.6/doc/simplepkg.aux30
-rw-r--r--branches/0.6/doc/simplepkg.dvibin25288 -> 0 bytes
-rw-r--r--branches/0.6/doc/simplepkg.html201
-rw-r--r--branches/0.6/doc/simplepkg.log286
-rw-r--r--branches/0.6/doc/simplepkg.out11
-rw-r--r--branches/0.6/doc/simplepkg.pdfbin69718 -> 0 bytes
-rw-r--r--branches/0.6/doc/simplepkg.tex241
-rw-r--r--branches/0.6/install/doinst.sh3
-rw-r--r--branches/0.6/install/slack-desc19
-rw-r--r--branches/0.6/lib/common.sh774
-rw-r--r--branches/0.6/mkbuild/generic.mkSlackBuild.new270
-rw-r--r--branches/0.6/mkbuild/sample-Pyrex-large.mkbuild156
-rw-r--r--branches/0.6/mkbuild/sample-Pyrex-small.mkbuild43
-rwxr-xr-xbranches/0.6/simplepkg.SlackBuild72
-rw-r--r--branches/0.6/src/createpkg515
-rwxr-xr-xbranches/0.6/src/jail-commit170
-rwxr-xr-xbranches/0.6/src/jail-update61
-rwxr-xr-xbranches/0.6/src/lspkg132
-rwxr-xr-xbranches/0.6/src/mkbuild732
-rwxr-xr-xbranches/0.6/src/mkjail113
-rwxr-xr-xbranches/0.6/src/rebuildpkg87
-rwxr-xr-xbranches/0.6/src/repos87
-rwxr-xr-xbranches/0.6/src/simplaret1045
-rwxr-xr-xbranches/0.6/src/templatepkg959
-rwxr-xr-xbranches/0.6/templates/openoffice/openoffice.d/etc/profile.d/lang.csh33
-rwxr-xr-xbranches/0.6/templates/openoffice/openoffice.d/etc/profile.d/lang.sh33
l---------branches/0.6/templates/openoffice/openoffice.d/opt/OpenOffice.org1
-rw-r--r--branches/0.6/templates/openoffice/openoffice.perms0
-rwxr-xr-xbranches/0.6/templates/openoffice/openoffice.s/post-install.sh22
-rw-r--r--branches/0.6/templates/openoffice/openoffice.template60
-rw-r--r--branches/0.6/templates/slackware/slackware.perms0
-rw-r--r--branches/0.6/templates/slackware/slackware.template566
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/apache/httpd.conf1046
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/apache/php.ini1122
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/apache/vhosts0
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/hosts21
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/logrotate.d/apache11
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/profile87
-rwxr-xr-xbranches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.0110
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.4256
-rwxr-xr-xbranches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.6110
-rwxr-xr-xbranches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.K88
-rwxr-xr-xbranches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.M256
-rwxr-xr-xbranches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.S294
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.httpd21
-rwxr-xr-xbranches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inet2129
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inetd36
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.ip_forward64
-rwxr-xr-xbranches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.local5
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.mysqld80
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.postfix45
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sendmail38
-rwxr-xr-xbranches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.serial132
-rwxr-xr-xbranches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sshd50
-rwxr-xr-xbranches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.syslog42
-rwxr-xr-xbranches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sysvinit58
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rssh.conf48
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/ssh/sshd_config103
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/var/www/htdocs/missing.html12
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.d/var/www/missing.html12
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.perms36
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.s/GPG-KEY88
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.s/devices.tar.gzbin322 -> 0 bytes
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.s/skel.conf70
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.s/vserver-legacy.sh49
-rw-r--r--branches/0.6/templates/vserver-legacy/vserver-legacy.template251
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/apache/httpd.conf1046
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/apache/php.ini1122
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/apache/vhosts0
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/hosts21
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/logrotate.d/apache11
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/profile87
-rwxr-xr-xbranches/0.6/templates/vserver/vserver.d/etc/rc.d/rc11
-rwxr-xr-xbranches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.0110
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.4256
-rwxr-xr-xbranches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.6110
-rwxr-xr-xbranches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.K88
-rwxr-xr-xbranches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.M256
-rwxr-xr-xbranches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.S294
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.httpd21
-rwxr-xr-xbranches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.inet2129
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.inetd36
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward64
-rwxr-xr-xbranches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.local5
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.mysqld80
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.postfix45
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.sendmail38
-rwxr-xr-xbranches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.serial132
-rwxr-xr-xbranches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.sshd50
-rwxr-xr-xbranches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.syslog42
-rwxr-xr-xbranches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.sysvinit58
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/rssh.conf48
-rw-r--r--branches/0.6/templates/vserver/vserver.d/etc/ssh/sshd_config103
-rw-r--r--branches/0.6/templates/vserver/vserver.d/var/www/htdocs/missing.html12
-rw-r--r--branches/0.6/templates/vserver/vserver.d/var/www/missing.html12
-rw-r--r--branches/0.6/templates/vserver/vserver.perms37
-rw-r--r--branches/0.6/templates/vserver/vserver.s/GPG-KEY88
-rw-r--r--branches/0.6/templates/vserver/vserver.s/devices.tar.gzbin320 -> 0 bytes
-rw-r--r--branches/0.6/templates/vserver/vserver.s/vserver.sh55
-rw-r--r--branches/0.6/templates/vserver/vserver.template250
-rwxr-xr-xbranches/0.6/utils/add-gpl33
-rwxr-xr-xbranches/0.6/utils/add-slack-required63
-rwxr-xr-xbranches/0.6/utils/convert-template-scheme35
-rwxr-xr-xbranches/0.6/utils/exec-slackbuild88
-rwxr-xr-xbranches/0.6/utils/merge-template37
-rwxr-xr-xbranches/0.6/utils/metapkg72
-rwxr-xr-xbranches/0.6/utils/searchpkg36
117 files changed, 0 insertions, 18307 deletions
diff --git a/branches/0.6/README b/branches/0.6/README
deleted file mode 100644
index d4d1463..0000000
--- a/branches/0.6/README
+++ /dev/null
@@ -1,2 +0,0 @@
-See doc/README for more information.
-Portuguese documentation at doc/README.pt_BR.
diff --git a/branches/0.6/conf/repos.conf.new b/branches/0.6/conf/repos.conf.new
deleted file mode 100644
index 1d77419..0000000
--- a/branches/0.6/conf/repos.conf.new
+++ /dev/null
@@ -1,41 +0,0 @@
-#
-# repository definitions for simplaret
-# please dont use any spaces inside a repository definition
-#
-
-# root repositories
-ROOT-i386="tds%http://slackware.mirrors.tds.net/pub/slackware/"
-ROOT-i386="sarava%http://slack.sarava.org/slackware/"
-ROOT-x86_64="sarava%http://slack.sarava.org/slamd64/"
-ROOT-x86_64="slackadelic%http://mirror1.slackadelic.com/slamd64/"
-ROOT-x86_64="heanet%http://ftp.heanet.ie/pub/slamd64/"
-ROOT-powerpc="workaround%http://slackintosh.workaround.ch/pub/slackintosh/"
-ROOT-s390="ibiblio%http://distro.ibiblio.org/pub/linux/distributions/slack390/"
-
-# noarch
-NOARCH="sarava%http://slack.sarava.org/packages/noarch"
-
-# i386 10.2
-REPOS-i386-10.2="sarava%http://slack.sarava.org/packages/slackware/slackware-10.2/"
-PATCHES-i386-10.2="sarava%http://slack.sarava.org/packages/slackware/slackware-10.2/patches/"
-
-# x86_64 10.2
-REPOS-x86_64-10.2="sarava%http://slack.sarava.org/packages/slamd64/slamd64-10.2/"
-PATCHES-x86_64-10.2="sarava%http://slack.sarava.org/packages/slamd64/slamd64-10.2/patches/"
-
-# x86_64 10.2b
-REPOS-x86_64-10.2b="sarava%http://slack.sarava.org/packages/slamd64/slamd64-10.2b/"
-PATCHES-x86_64-10.2b="sarava%http://slack.sarava.org/packages/slamd64/slamd64-10.2b/patches/"
-
-# i386 11.0
-REPOS-i386-11.0="sarava%http://slack.sarava.org/packages/slackware/slackware-11.0/"
-PATCHES-i386-11.0="sarava%http://slack.sarava.org/packages/slackware/slackware-11.0/patches/"
-
-# x86_64 11.0
-REPOS-x86_64-11.0="sarava%http://slack.sarava.org/packages/slamd64/slamd64-11.0/"
-PATCHES-x86_64-11.0="sarava%http://slack.sarava.org/slamd64/slamd64-11.0/patches/"
-
-# powerpc 11.0
-REPOS-powerpc-11.0="sarava%http://slack.sarava.org/packages/slackintosh/slackintosh-11.0/"
-PATCHES-powerpc-11.0="workaround%http://slackintosh.workaround.ch/pub/slackintosh/11.0/patches/"
-
diff --git a/branches/0.6/conf/simplepkg.conf.new b/branches/0.6/conf/simplepkg.conf.new
deleted file mode 100644
index 70aa70b..0000000
--- a/branches/0.6/conf/simplepkg.conf.new
+++ /dev/null
@@ -1,154 +0,0 @@
-#
-# /etc/simplepkg/simplepkg.conf
-#
-
-# Default architecture: set this option if you dont want simplepkg
-# to use the value from /etc/slackware-version
-# DEFAULT_ARCH="i386"
-
-# Default version: set this option if you dont want simplepkg;
-# to use the value from /etc/slackware-version
-# DEFAULT_VERSION="11.0"
-
-# Where jails are placed
-JAIL_ROOT="/vservers"
-
-# Wheter mkjial should add new jails in the jail list;
-# to enable it, set to "1" or "yes"
-ADD_TO_JAIL_LIST="1"
-
-# Whether mkjail should clean the package cache before installation
-# to enable it, set to "1" or "yes"
-SIMPLARET_CLEAN="1"
-
-# whether mkjail should clean the package cache after the installation;
-# to enable it, set to "1" or "yes"
-SIMPLARET_DELETE_DOWN="1"
-
-# Whether mkjail should issue a simplaret --update before install the jail;
-# to enable it, set to "1" or "yes"
-SIMPLARET_UPDATE="1"
-
-# Wheter try to download from the next repository on failed download.
-SIMPLARET_DOWNLOAD_FROM_NEXT_REPO="1"
-
-# Wheter delete also patches when simplaret --purge is called;
-# to enable it, set to "1" or "yes"
-SIMPLARET_PURGE_PATCHES="0"
-
-# Whether delete each package rigth after its installation;
-# to enable it, set to "1" or "yes"
-SIMPLARET_DELETE_DURING="0"
-
-# Delete packages older than N weeks from the cache
-SIMPLARET_PURGE_WEEKS="3"
-
-# Where patches are placed
-PATCHES_DIR="/var/simplaret/patches"
-
-# Place to store your packages
-STORAGE="/var/simplaret/packages"
-
-# Whether to use passive ftp transfers;
-# to enable it, set to "1" or "yes"
-PASSIVE_FTP="1"
-
-# Http retrieval tool;
-# available parameters are "wget" or "curl"
-HTTP_TOOL="wget"
-
-# Ftp retrieval tool;
-# available parameters are "wget", "curl" or "ncftpget"
-FTP_TOOL="wget"
-
-# Set connection timeout in seconds
-CONNECT_TIMEOUT="20"
-
-# ROOT repository package priority
-ROOT_PRIORITY="patches slackware extra testing pasture"
-
-# REPOS repository package priority
-REPOS_PRIORITY="patches slackware extra testing pasture"
-
-# Whether to check package signatures (you should have the repository
-# maintainer key on your keyring)
-SIGNATURE_CHECKING="0"
-
-# Whether simplaret will try to solve dependencies by looking
-# for packages' slack-required
-DEPENDENCY_CHECKING="1"
-
-# Enabling this option (i.e, setting to "1" or "yes"), simplaret will
-# donwload even # already applied patches, a good option when you plan
-# to keep local copies of all needed patches for your system
-DOWNLOAD_EVEN_APPLIED_PATCHES="0"
-
-# Enabling this option (i.e, setting to "1" or "yes"), simplaret will
-# look at your standard repositories for new packages; if it find a
-# package with different version of your current installed package and
-# also this package isnt in the packages folder, then the new package
-# is applied; if in doubt, just say no or leave blank. Otherwise set it
-# either to "yes" or "1" and remember that if enabling this feature can
-# cause problems if you use more than one REPOS definition for each
-# ARCH and VERSION. Also, this option can be very slow.
-CONSIDER_ALL_PACKAGES_AS_PATCHES="0"
-
-# Enabling this option (i.e, setting to "1" or "yes"), simplaret will
-# store patches it finds on ROOT repositories on
-#
-# $PATCHES_DIR/$ARCH/$VERSION/root-$repository_name.
-#
-# By default this option is turned off because it breaks the standard
-# way to store packages and can cause some confusion, but its an useful
-# feature if you like to see all patches apart from common packages and/or
-# stored in the same tree.
-STORE_ROOT_PATCHES_ON_PATCHES_DIR="0"
-
-# Set to yes if your templates will be placed in a subversion repository
-# This just work if TEMPLATE_STORAGE_STYLE is set to own-folder (default)
-TEMPLATES_UNDER_SVN="no"
-
-# Where your templates will be located.
-# Dont change it except you know what you're doing.
-TEMPLATE_FOLDER="/etc/simplepkg/templates"
-
-# This variable controls in which folder / subfolder your templates will
-# be stored. Possible values are:
-#
-# - simplepkg-folder: templates are stored at /etc/simplepkg
-# - templates-folder: templates are stored at /etc/simplepkg/templates
-# - own-folder: each template stored at its own folder
-# at /etc/simplepkg/templates/template-name
-#
-# This variable has backwards purposes only, so dont change it.
-TEMPLATE_STORAGE_STYLE="own-folder"
-
-#---------------------------------------------------------------------
-# MKBUILD AND CREATEPKG SECTION
-#---------------------------------------------------------------------
-# Set SlackBuilds default directory from scripts
-SLACKBUILDS_DIR="/var/simplaret/slackbuilds"
-
-# Set binaries default repository directory
-MAKEPKG_REPOS="/var/simplaret/repos"
-
-# Set sources default directory
-SOURCE_DIR="/var/simplaret/sources"
-
-# Set color style
-# possible values are: color,gray, none
-COLOR_MODE="none"
-
-# Createpkg architecture
-CREATE_ARCH="i486"
-
-# Remove build files
-CREATE_CLEANUP="yes"
-
-# Remove old packages from repository tree by createpkg
-REMOVE_OLD_PACKAGE="off"
-
-# Move package to SlackBuilds-like tree
-MOVE_BIN_PACKAGE="off"
-
-#---------------------------------------------------------------------
diff --git a/branches/0.6/doc/CHANGELOG b/branches/0.6/doc/CHANGELOG
deleted file mode 100644
index cfaa5d2..0000000
--- a/branches/0.6/doc/CHANGELOG
+++ /dev/null
@@ -1,389 +0,0 @@
-simplepkg changelog
-===================
-
-0.5pre17
-========
-
- - createpkg, lspkg, jail-commit:
- - bugfixes
-
-0.5pre16
-========
-
- - doinst.sh:
- - small fix
-
-0.5pre15
-========
-
- - simplaret:
- - small bugfix
-
- - common.sh:
- - small bugfix
-
- - mkbuild:
- - some changes
-
-0.5pre14
-========
-
- - simplaret
- - added variable REPOS_PRIORITY
- - added variable SIMPLARET_DOWNLOAD_FROM_NEXT_REPO
-
- - lspkg:
- - small bugfix
-
- - common.sh:
- - on search_template, doesnt return a template from
- defaults/ if the function is called with --update
-
- - utils/add-slack-required:
- - command line enhancement
-
-0.5pre9 - 0.5pre13
-==================
-
- - bugfix releases
-
-0.5pre8
-=======
-
- - lspkg:
- - bugfix
-
- - common.sh:
- - bugfix in function slash
-
-0.5pre7
-=======
-
- - simplaret:
- - fixed bug for ROOT definitions when there is packages
- inside of folders different than ROOT_PRIORITY
-
-0.5pre6
-=======
-
- - repos:
- - FILE_LIST generation fix
-
- - mkjail:
- - new config variable ADD_TO_JAIL_LIST controls wheter to
- add new jails into the JAIL_LIST file
-
-0.5pre5
-=======
-
- - jail-commit
- - SILENT env variable to decrease verbosity
-
-0.5pre4
-=======
-
- - templatepkg:
- - small fixes
- - help usage summary improvements
- - now using variable TEMPLATE_FOLDER
- - SILENT env variable to decrease verbosity
- - option -p | --post-install renamed to -b | --batch-edit
- - option -p | --post-install now used to build a package from a template
- - option -d | --delete now can also remove post-install scripts
-
- - common.sh
- - small fixes
- - now using variable TEMPLATE_FOLDER
-
- - jail-commit:
- - calling templatepkg silently
- - small fixes
-
-0.5pre3
-=======
-
- - again, lots of bugfixes
-
- - jail-commit:
- - update a template just once if finds more than one entry
- for a template in the jailist
-
-0.5pre2
-=======
-
- - lots of bugfixes
-
- - templatepkg:
- - now creates missing components in a template
-
-0.5pre1
-=======
-
- Lots of changes!
-
- - repos: cosmetic changes
-
- - lspkg:
- - support for $ROOT env variable
- - some improvements
-
- - CHANGELOG cleanup
-
- - subversion repository support for templates
-
- - metapkg moved to utils/
-
- - simplaret:
- - new config variables:
- - STORE_ROOT_PATCHES_ON_PATCHES_DIR
- - SIGNATURE_CHECKING
- - ROOT=/otherroot works for --install, --remove and --upgrade
- - signature checking
- - dependency checking through slack-required
-
- - mkjail:
- - added support for slack-required as templates
- - templates now can be stored either on
- - /etc/simplepkg/template_name.template
- - /etc/simplepkg/templates/template_name.template
- - /etc/simplepkg/templates/template_name/template_name.template
-
- - jail-update
- - old script renamed to jail-commit
- - now update a jail from a template
- - svn repository support
-
- - jail-commit
- - new script, commit changes from a jail to the templates
- - svn repository support
-
- - templatepkg:
- - major rewrite
- - svn repository support
- - now supports a tagfile or slack-required as a template
- - new/changed options
- -c | --create: improvements
- -a | --add: changed to add files into a template
- -u | --update: update a template
- -d | --delete: delete files or folders from a template
- -s | --sync: sync /etc/simplepkg/templates working copy
- -e | --export: export /etc/simplepkg/templates to a svn repository
- -i | --import: grab /etc/simplepkg/templates from a svn repository
- -r | --remove: remove a template
- -l | --list: list templates
- -p | --post-install: add or edit post-installation scripts
- -t | --template-edit: edit template package list
- -h | --help: display this summary
-
-0.4.9pre18-23
-=============
-
- - simplaret:
- - enhanced http retrieval: curl support
- - enhanced verbosity
- - get-patches small changes
- - various fixes
-
-0.4.9pre10-17
-=============
-
- - lots of simplaret fixes
-
-0.4.9pre9
-=========
-
- - createpkg:
- - speedup
- - ncftpget support
- - timeout support
- - sets the correct architecture
-
- - deleted jail-upgrade
-
- - removed swaret support
-
-0.4.9pre8
-=========
-
- - createpkg: bugfix
-
- - common.sh:
- - enhanced config file evaluation
- - fixed function default_arch
-
- - simplaret:
- - config evaluation via common.sh
- - new config parameter SIMPLARET_PURGE_PATCHES
-
-0.4.9pre7
-=========
-
- - repos: added patches/ metafile creation
-
- - jail-upgrade:
- - added option CONSIDER_ALL_PACKAGES_AS_PATCHES
- - merged swaret and simplaret upgrade procedures
- - act recursively on patches' folder
-
- - simplaret: lots of changes, most important are:
- - new repository scheme, take a look at repos.conf.new.
- - --get looks first to PATCHES repositories, then ROOT,
- then REPOS and finally at NOARCH repositories; the
- firts matching package is downloaded.
- - new config parameter ROOT_PRIORITY set the priority
- of folder lookup at a ROOT repository, defaults to
- "patches slackware extra testing pasture".
- - for --get, check if an already existing package
- in the local repository has the same version and
- build number, otherwise erase the old and download
- the new one.
- - fixed --get-paches
- - added --upgrade option
- - added --install
- - added --remove
- - new config parameter DOWNLOAD_EVEN_APPLIED_PATCHES
-
- - createpkg: lots of changes
-
-0.4.9pre6
-=========
-
- - createpkg:
- - fixes
- - now with slackbuild error handling
- - increased verbosity
-
- - small fixes on rebuildpkg
-
- - lspkg enhancements
-
- - simplaret fix on --purge
-
- - updated default repos.conf
-
-0.4.9pre5
-=========
-
- - added script "repos"
-
- - moved simplaret to /usr/bin
-
-0.4.9pre4
-=========
-
- - createpkg: better command line evaluation,
- now using "upgradepkg --install-new" to
- install a package and added the command
- line option --no-deps so createpkg doesn't
- goes down to solve all slack-required
- dependencies.
-
-0.4.9pre3
-=========
-
- - small fix on createpkg when handling with
- slackbuilds with similar names
-
-0.4.9pre2
-=========
-
- - fixed simplepkg.SlackBuild
-
- - fixed doinst.sh
-
- - re-organized the source repository
-
- - added createpkg
-
- - updated README and README.pt_BR
-
-0.4.8
-=====
-
- - simplaret: removed extra folder from slamd64 definition
-
- - fixed a typo
-
-0.4.7
-=====
-
- - templatepkg bugfix on blank template lines and on package deletion
- changed simplaret working dir in simplaret.conf.new
-
-0.4.6
-=====
-
- - small bugfix on jail-update that prevented template update
-
-0.4.5
-=====
-
- - vserver template update
-
-0.4.4
-=====
-
- - WARNING option on config file for simplaret
-
- - SILENT env var, if a non-zero value, keeps simplaret
- work silenty when purging and works like if WANRING is set
- to not null.
-
- - added SIMPLARET_DELETE_DURING config parameter: when set
- to a non-zero value deletes each package rigth after its
- installation
-
-0.4.3
-=====
-
- - added openoffice.org template
-
-0.4.2
-=====
-
- - common.sh: fix on install_packages when handling
- with similar package names
-
-0.4.1
-=====
-
- - templatepkg: fixed tagfiles and comment handling
-
-0.4
-===
-
- - multi-plataform and version management
-
- now simplepkg supports jails with architectures and versions
- others than the main system, read the docs for details.
-
- - added simplaret: a small script for downloading packages
-
- - jail-upgrade
-
- * arch checking via /etc/slackware-version on each jail
- * supports multi-arch and multi-version repository
- * integrated with simplaret
-
- - common.sh: improved functions to support simplaret
-
-0.3.7-0.3.9
-===========
-
- - bugfix releases
-
-0.3.6
-=====
-
- - added "-u" option to eval_config to ask for a swaret --update
-
-0.3.5
-=====
-
- - "main" jail support for jail-update
-
-0.3.4
-=====
-
- - Started changelog :)
-
diff --git a/branches/0.6/doc/COPYING b/branches/0.6/doc/COPYING
deleted file mode 100644
index d60c31a..0000000
--- a/branches/0.6/doc/COPYING
+++ /dev/null
@@ -1,340 +0,0 @@
- GNU GENERAL PUBLIC LICENSE
- Version 2, June 1991
-
- Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
- Preamble
-
- The licenses for most software are designed to take away your
-freedom to share and change it. By contrast, the GNU General Public
-License is intended to guarantee your freedom to share and change free
-software--to make sure the software is free for all its users. This
-General Public License applies to most of the Free Software
-Foundation's software and to any other program whose authors commit to
-using it. (Some other Free Software Foundation software is covered by
-the GNU Library General Public License instead.) You can apply it to
-your programs, too.
-
- When we speak of free software, we are referring to freedom, not
-price. Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-this service if you wish), that you receive source code or can get it
-if you want it, that you can change the software or use pieces of it
-in new free programs; and that you know you can do these things.
-
- To protect your rights, we need to make restrictions that forbid
-anyone to deny you these rights or to ask you to surrender the rights.
-These restrictions translate to certain responsibilities for you if you
-distribute copies of the software, or if you modify it.
-
- For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must give the recipients all the rights that
-you have. You must make sure that they, too, receive or can get the
-source code. And you must show them these terms so they know their
-rights.
-
- We protect your rights with two steps: (1) copyright the software, and
-(2) offer you this license which gives you legal permission to copy,
-distribute and/or modify the software.
-
- Also, for each author's protection and ours, we want to make certain
-that everyone understands that there is no warranty for this free
-software. If the software is modified by someone else and passed on, we
-want its recipients to know that what they have is not the original, so
-that any problems introduced by others will not reflect on the original
-authors' reputations.
-
- Finally, any free program is threatened constantly by software
-patents. We wish to avoid the danger that redistributors of a free
-program will individually obtain patent licenses, in effect making the
-program proprietary. To prevent this, we have made it clear that any
-patent must be licensed for everyone's free use or not licensed at all.
-
- The precise terms and conditions for copying, distribution and
-modification follow.
-
- GNU GENERAL PUBLIC LICENSE
- TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
- 0. This License applies to any program or other work which contains
-a notice placed by the copyright holder saying it may be distributed
-under the terms of this General Public License. The "Program", below,
-refers to any such program or work, and a "work based on the Program"
-means either the Program or any derivative work under copyright law:
-that is to say, a work containing the Program or a portion of it,
-either verbatim or with modifications and/or translated into another
-language. (Hereinafter, translation is included without limitation in
-the term "modification".) Each licensee is addressed as "you".
-
-Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope. The act of
-running the Program is not restricted, and the output from the Program
-is covered only if its contents constitute a work based on the
-Program (independent of having been made by running the Program).
-Whether that is true depends on what the Program does.
-
- 1. You may copy and distribute verbatim copies of the Program's
-source code as you receive it, in any medium, provided that you
-conspicuously and appropriately publish on each copy an appropriate
-copyright notice and disclaimer of warranty; keep intact all the
-notices that refer to this License and to the absence of any warranty;
-and give any other recipients of the Program a copy of this License
-along with the Program.
-
-You may charge a fee for the physical act of transferring a copy, and
-you may at your option offer warranty protection in exchange for a fee.
-
- 2. You may modify your copy or copies of the Program or any portion
-of it, thus forming a work based on the Program, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
- a) You must cause the modified files to carry prominent notices
- stating that you changed the files and the date of any change.
-
- b) You must cause any work that you distribute or publish, that in
- whole or in part contains or is derived from the Program or any
- part thereof, to be licensed as a whole at no charge to all third
- parties under the terms of this License.
-
- c) If the modified program normally reads commands interactively
- when run, you must cause it, when started running for such
- interactive use in the most ordinary way, to print or display an
- announcement including an appropriate copyright notice and a
- notice that there is no warranty (or else, saying that you provide
- a warranty) and that users may redistribute the program under
- these conditions, and telling the user how to view a copy of this
- License. (Exception: if the Program itself is interactive but
- does not normally print such an announcement, your work based on
- the Program is not required to print an announcement.)
-
-These requirements apply to the modified work as a whole. If
-identifiable sections of that work are not derived from the Program,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works. But when you
-distribute the same sections as part of a whole which is a work based
-on the Program, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Program.
-
-In addition, mere aggregation of another work not based on the Program
-with the Program (or with a work based on the Program) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
- 3. You may copy and distribute the Program (or a work based on it,
-under Section 2) in object code or executable form under the terms of
-Sections 1 and 2 above provided that you also do one of the following:
-
- a) Accompany it with the complete corresponding machine-readable
- source code, which must be distributed under the terms of Sections
- 1 and 2 above on a medium customarily used for software interchange; or,
-
- b) Accompany it with a written offer, valid for at least three
- years, to give any third party, for a charge no more than your
- cost of physically performing source distribution, a complete
- machine-readable copy of the corresponding source code, to be
- distributed under the terms of Sections 1 and 2 above on a medium
- customarily used for software interchange; or,
-
- c) Accompany it with the information you received as to the offer
- to distribute corresponding source code. (This alternative is
- allowed only for noncommercial distribution and only if you
- received the program in object code or executable form with such
- an offer, in accord with Subsection b above.)
-
-The source code for a work means the preferred form of the work for
-making modifications to it. For an executable work, complete source
-code means all the source code for all modules it contains, plus any
-associated interface definition files, plus the scripts used to
-control compilation and installation of the executable. However, as a
-special exception, the source code distributed need not include
-anything that is normally distributed (in either source or binary
-form) with the major components (compiler, kernel, and so on) of the
-operating system on which the executable runs, unless that component
-itself accompanies the executable.
-
-If distribution of executable or object code is made by offering
-access to copy from a designated place, then offering equivalent
-access to copy the source code from the same place counts as
-distribution of the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
- 4. You may not copy, modify, sublicense, or distribute the Program
-except as expressly provided under this License. Any attempt
-otherwise to copy, modify, sublicense or distribute the Program is
-void, and will automatically terminate your rights under this License.
-However, parties who have received copies, or rights, from you under
-this License will not have their licenses terminated so long as such
-parties remain in full compliance.
-
- 5. You are not required to accept this License, since you have not
-signed it. However, nothing else grants you permission to modify or
-distribute the Program or its derivative works. These actions are
-prohibited by law if you do not accept this License. Therefore, by
-modifying or distributing the Program (or any work based on the
-Program), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Program or works based on it.
-
- 6. Each time you redistribute the Program (or any work based on the
-Program), the recipient automatically receives a license from the
-original licensor to copy, distribute or modify the Program subject to
-these terms and conditions. You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties to
-this License.
-
- 7. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License. If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Program at all. For example, if a patent
-license would not permit royalty-free redistribution of the Program by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Program.
-
-If any portion of this section is held invalid or unenforceable under
-any particular circumstance, the balance of the section is intended to
-apply and the section as a whole is intended to apply in other
-circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system, which is
-implemented by public license practices. Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
- 8. If the distribution and/or use of the Program is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Program under this License
-may add an explicit geographical distribution limitation excluding
-those countries, so that distribution is permitted only in or among
-countries not thus excluded. In such case, this License incorporates
-the limitation as if written in the body of this License.
-
- 9. The Free Software Foundation may publish revised and/or new versions
-of the General Public License from time to time. Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-Each version is given a distinguishing version number. If the Program
-specifies a version number of this License which applies to it and "any
-later version", you have the option of following the terms and conditions
-either of that version or of any later version published by the Free
-Software Foundation. If the Program does not specify a version number of
-this License, you may choose any version ever published by the Free Software
-Foundation.
-
- 10. If you wish to incorporate parts of the Program into other free
-programs whose distribution conditions are different, write to the author
-to ask for permission. For software which is copyrighted by the Free
-Software Foundation, write to the Free Software Foundation; we sometimes
-make exceptions for this. Our decision will be guided by the two goals
-of preserving the free status of all derivatives of our free software and
-of promoting the sharing and reuse of software generally.
-
- NO WARRANTY
-
- 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
-FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
-OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
-PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
-OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
-TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
-PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
-REPAIR OR CORRECTION.
-
- 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
-REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
-INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
-OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
-TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
-YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
-PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGES.
-
- END OF TERMS AND CONDITIONS
-
- How to Apply These Terms to Your New Programs
-
- If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
- To do so, attach the following notices to the program. It is safest
-to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
- <one line to give the program's name and a brief idea of what it does.>
- Copyright (C) <year> <name of author>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-
-
-Also add information on how to contact you by electronic and paper mail.
-
-If the program is interactive, make it output a short notice like this
-when it starts in an interactive mode:
-
- Gnomovision version 69, Copyright (C) year name of author
- Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
- This is free software, and you are welcome to redistribute it
- under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License. Of course, the commands you use may
-be called something other than `show w' and `show c'; they could even be
-mouse-clicks or menu items--whatever suits your program.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the program, if
-necessary. Here is a sample; alter the names:
-
- Yoyodyne, Inc., hereby disclaims all copyright interest in the program
- `Gnomovision' (which makes passes at compilers) written by James Hacker.
-
- <signature of Ty Coon>, 1 April 1989
- Ty Coon, President of Vice
-
-This General Public License does not permit incorporating your program into
-proprietary programs. If your program is a subroutine library, you may
-consider it more useful to permit linking proprietary applications with the
-library. If this is what you want to do, use the GNU Library General
-Public License instead of this License.
diff --git a/branches/0.6/doc/README b/branches/0.6/doc/README
deleted file mode 100644
index 50b0e9d..0000000
--- a/branches/0.6/doc/README
+++ /dev/null
@@ -1,258 +0,0 @@
-Simplepkg: installation manager and metapackage system
-------------------------------------------------------
-
-Author: Silvio Rhatto <rhatto at riseup.net>
-Licence: GPL
-
-Simplepkg is a non-intrusive package management system running on top of pkgtool.
-It uses templates -- lists of installed packages, scripts and configuration files
--- allowing the creation of installation profiles that can be used do install a
-complete and configured slackware system in another partition or to create chroot
-environments. The same templating scheme extends slackware packaging system, adding
-metapackages: a list of packages installed or removed with a single command.
-
-Documentation
--------------
-
- English documentation: README | http://slack.sarava.org/node/15
- Portuguese documentation: REAMDE.pt_BR | http://slack.sarava.org/node/12
-
-Description
------------
-
-All GNU/Linux distributions comes with a well developed packaging system. The question now
-is how pratical is the way to install, configure and control any changes in a system.
-
-As an example, suppose you should keep a list of about 200 slackware machines, some
-of them used as desktops, others as mail or webservers. If you lost some hardrives
-or usually need to re-install or update some of those boxes.
-
-Using the slackware installation cd and configuring by hand all the time you got a crash
-is a time loss activity and you'll never know if something remained missconfigured. An
-alternative is to keep a complete backup of a machine or some parts of the tree, but for
-a large number of different boxes this procedure costs a lots of resources.
-
-Simplepkg offers an alternative sollution for this and other problems related to installation
-management, allowing you to keep templates of each machine and install a custom slackware
-system with just one or a few commands. Creating and upgrading chroot and vservers is easy
-with simplepkg.
-
-Architecture
-------------
-
-Simplepkg is a set of scripts wrote in the KISS philosophy. Its a pretty simple system, composed
-by the following commands:
-
- - mkjail: build a slackware jail/installation in a folder
- - metapkg: install or remove a metapackage
- - templatepkg: create or update a package list of an installation template
- - lspkg: show installed packages and its contents
- - jail-upgrade: upgrade all or some of the jails/installations
- - jail-update: update all configuration files of a template
- - rebuildpkg: rebuild a package based on its /var/log/packages entry
- - simplaret: package retrieval tool
- - createpkg: donwload, compile and package creationg script based on http://slack.sarava.org/slackbuilds
-
-Simplepkg configs are placed at /etc/simplepkg. Templates are .template files containing an one-by-line
-package list. A template can be something like this:
-
- aaa_base
- aaa_elflibs
- apache
- bash
- bin
- coreutils
- findutils
-
-Slackware's tagfile format can be used too as a template.
-
-Installation
-------------
-
-The latest version of simplepkg is locate at http://slack.sarava.org/packages/noarch/.
-Install it with the usual way:
-
- installpkg simplepkg-VERSION-noarch-BUILD.tgz
-
-If you have a working swaret on your system, add this line on you swaret.conf:
-
- REPOS_ROOT=SlackMidiataticaNoarch%http://slack.sarava.org/packages/noarch
-
-and then issue those commands:
-
- swaret --update
- swaret --install simplepkg
-
-Configuration
--------------
-
-As an example, we'll create a jail based on the packages installed in your slackware
-system. Edit the config file /etc/simplepkg/simplepkg.conf:
-
- # /etc/simplepkg/simplepkg.conf
- JAIL_ROOT="/vservers" # where jails are placed
- SIMPLARET="simplaret" # package grabber program (can be swaret if you have it installed)
- SIMPLARET_CLEAN="1" # clean package cache before installation
- SIMPLARET_DELETE_DOWN="1" # clean package cache after the installation
- SIMPLARET_UPDATE="0" # issue an simplaret --update before install the jail
- SIMPLARET_PURGE_WEEKS="N" # delete packages older than N weeks from the cache
- PATCHES_DIR="/storage/package/patches" # where patches are placed
- DEFAULT_ARCH="i386"
- DEFAULT=VERSION="10.2"
- STORAGE="/storage/packages" # where simplepkg store packages
- PASSIVE_FTP="1"
-
-You should also put in /etc/simplepkg/repos.conf all package repositories you use, like this:
-
- ROOT-i386="http://slack.sarava.org/packages/slackware"
- REPOS-i386="slack-sarava%http://slack.sarava.org/packages/slackware/slackware-10.2/"
- ROOT-x86_64-10.2="http://darkstar.ist.utl.pt/pub/slamd64/"
- REPOS-x86_64-10.2="slamd-sarava%http://slack.sarava.org/packages/slamd64/slamd64-10.2/"
-
-Instead of simplaret you can use swaret to fetch packages and them your swaret.conf must
-be configured to use the same place as STORAGE to the package cache. In this case you cant
-keep installations and jails with multiple arquitetures and for that reason the use of
-simplaret is recommended.
-
-Creating jails and replicating installations
---------------------------------------------
-
- templatepkg my-slackare
- mkjail jail my-slackware
-
-The previous commands creates a template called my-slackware from based on your installed
-softwares listed in /var/log/packages and then creates a completely new slackware
-tree with all those packages in the folder /vservers/jail (depending on the value of JAIL_ROOT from
-your simplepkg.conf).
-
-If you want that some config files get copied or some scripts executed after install this jail,
-place in the folder /etc/simplepkg/my-slackware.d all your config files (preserving the file
-system hierarchy, i.e, /etc/simplepkg/my-slackware/etc/apache/httpd.conf) and the scripts at
-/etc/simplepkg/my-slackware.s/. The template vserver, which comes in the simplepkg package, has
-an example script to use with mkjail.
-
-You can specify an alternative destination for your jail with a command like
-
- ROOT=/mnt mkjail hda2 my-slackware
-
-This does exactly what you think: installs slackware in /mnt/hda2 with exactly the same packages
-you have on your system, replacing the need of the slackware installer!
-
-In case no template specified, mkjail uses the one called /etc/simplepkg/default.template.
-
-If you keep your jails in JAIL_ROOT with the same name as the template you used to create it, its
-possible to use the command jail-update to copy all modifications made in the files which their
-counterparts are placed at /etc/simplepkg/jail-name.d. Then you can copy all configuration files
-you edited to the template folder and leave a crontab entry to everyday seek for changes and update
-the template. When you issue the command
-
- jail-update
-
-all jails listed in /etc/simplepkg/jaillist are updated. This command also updates the package list
-of the template.
-
-To add or remove packages from a template, you can just edit by hand the template file or use the
-command templatepkg with the -a (append) flag, which adds just the new installed packages in the
-template file.
-
-If you want to create a template from a jail, use
-
- templatepkg jail /vservers/jail
-
-Metapackages
-------------
-
-Another use for the templates is the creation of metapackegs: new users have lots of difficulties
-to track dependencies when installing a software. Using a template containing the name of all
-packages needed by some program allow users to easily install it through the command
-
- metapkg --install program-name
-
-This seems like swaret or slapt-get, with the only difference in the way metapkg deals with
-dependence resolution. Slapt-get support the slack-required file, wich comes or not with the
-package. Swaret has its own tool for dependence matching.
-
-Simplepkg doesn't wish to substitute those two dependence checking modes, but offer an alternate
-way to distribute packages where dependences are resolved without an specific tool or a change
-in the package itself.
-
-A metapackage, i.e, all installed packages from a template, can be removed with
-
- metapkg --remove program-name
-
-Upgrading jails
----------------
-
-Both the main installation (your root system) and your jails are upgraded with the command
-jail-upgrade: just adjust simplepkg.conf's PATCHES_DIR to where you store slackware patches
-(that can be rsync'ed everyday) and do a
-
- jail-upgrade
-
-This will upgrade your main system and all jails living in JAIL_ROOT. To specify another
-folder, use
-
- ROOT=/otherroot jail-upgrade
-
-If you want to upgrade just one specific jail,
-
- jail-upgrade jail-name
-
-To use a patches folder other than PATCHES_DIR, e.g when you have jails with different
-slackware versions, use
-
- PATCHES=/alternative/patches/folder jail-upgrade jail-name
-
-Different archs and versions
-----------------------------
-
-Simplepkg was idealized to permit a template to create jails from any architecture and version
-of a slackware-like system. Upgrading tasks also are unified. This feature just works if you
-use simplaret and not swaret as the package retrieval tool.
-
-As another example, to create an slack 10.1 installation (assuming your /etc/simplepkg/repos.conf with
-the right configuration), just type
-
- VERSION=10.1 mkjail my-jail server-template
-
-Different archs can be used too. If you have a x86_64 system and wants to install a slack 10.2
-in a partition, try something like
-
- ARCH=i386 VERSION=10.2 ROOT=/mnt mkjail hda2 my-slackware
-
-Note that the templates are arch and version independent, as they just contain package names,
-configuration files and scripts. For this reason, the commands templatepkg, metapkg, lspkg and
-jail-update can be used normaly.
-
-To upgrade jails with othes archs and versions, jail-upgrade checks this information through
-/etc/slackware-version for each jail and applies the correspondent patches grabed from
-simplaret (see the proper documentation).
-
-By this way, doesn't matter which versions and archs each of your jails has, jail-upgrade remains
-the same since your patches are sorted by arch an version, as explained in simplaret documentation
-found at http://slack.sarava.org/node/17.
-
-Auxiliar applications: rebuildpkg and createpkg
------------------------------------------------
-
-Simplepkg comes with an additional helper tool that recover installed packages which the original
-.tgz file was lost. The command rebuildpkg rebuilds a package from their entry in /var/log/packages.
-As an example,
-
- rebuildpkg coreutils
-
-rebuilds the coreutils package using the files, scripts and metainformations stored in
-/var/log/packages/ and /var/log/scripts/.
-
-If you want to build you own packages using the scripts available from http://slack.sarava.org/slackbuilds,
-use the createpkg script:
-
- createpkg package-name
-
-Source
-------
-
-Source code for simplepkg and its package builder can be fetched via subversion:
-
- svn checkout svn://slack.sarava.org/simplepkg
-
diff --git a/branches/0.6/doc/README.pt_BR b/branches/0.6/doc/README.pt_BR
deleted file mode 100644
index 80634d2..0000000
--- a/branches/0.6/doc/README.pt_BR
+++ /dev/null
@@ -1,254 +0,0 @@
-Simplepkg: gerenciamento de instalações e pacotes
--------------------------------------------------
-
-Autor: Silvio Rhatto <rhatto at riseup.net>
-Licença: GPL
-
-O simplepkg é um sistema de gerenciamento de pacotes que roda sobre o pkgtool. Ele é composto
-por vários scripts que desempenham funções de administração e desenvolvimento de sistemas
-do tipo Slackware, procurando fechar um circuito de produção, envolvendo a construção, a
-instalação de pacotes e até mesmo a instalação do sistema de forma automatizada.
-
-Do lado do desenvolvedor/a, ele ajuda na criação de SlackBuilds e construção de pacotes.
-Do lado do administrador/a, ele possibilita a instalação automatizada de sistemas, instalação
-de pacotes e a criação de "templates" de instalação -- que contém todos os arquivos de configuração,
-informações de permissões e scripts de pós-instalação de uma dada máquina ou jaula.
-
-Ele trabalha com templates -- listas com pacotes instalados, scripts e arquivos de configuração
--- permitindo criar perfis de instalação que podem ser então usados para instalar o sistema numa
-outra partição, criar um chroot específico ou até trabalhar com o conceito de metapacotes: uma
-lista de pacotes que pode ser instalada e removida com apenas um comando.
-
-Documentação
-------------
-
-A documentação mais atualizada do simplepkg está em http://slack.sarava.org/simplepkg
-
-Descrição
----------
-
-Todas as distribuições de GNU/Linux já tem algum sistema de empacotamento amadurecido. A questão
-agora é a praticidade de instalar e controlar o que está instalado, tanto pacotes como arquivos
-de configuração de uma máquina, além da facilidade na criação de pacotes.
-
-Imagine por exemplo se você precisa manter uma lista de pacotes de 200 máquinas slackware, sendo
-que algumas são usadas como desktop, outras como servidores web, alguma sendo o servidor de email
-e assim por diante. Imagine agora que você perca o disco de algumas dessas máquinas ou que precise
-cotidianamente reinstalar ou atualizar um sistema.
-
-Usar o cd de instalação do slackware e configurar na mão toda a vez que der um pau faria com que
-você ficasse louco/a e desperdiçasse muito tempo, além do que sempre ocorre de esquecermos algum
-detalhe ou pacote durante a configuração do sistema. Manter um backup completo de cada máquina,
-por outro lado, pode ser muito custoso se o número delas for muito grande.
-
-O simplepkg permite que você mantenha um template para cada grupo de máquinas e com apenas um
-comando instalar o template numa partição. Além do template, você precisa configurar o simplepkg
-para obter pacotes de um repositório local ou remoto.
-
-Gerenciar instalações e pacotes não é tudo o que o simplepkg faz. Ele pode ser usado até na
-criação de jaula e vservers. Ou então ele ...
-
-Arquitetura
------------
-
-O simplepkg é um conjunto de scripts escritos com a filosofia KISS em mente. Ele é um sistema muito
-simples, composto pelos seguintes comandos:
-
- - mkjail: constrói uma jaula/instalação de slackware numa pasta
- - metapkg: instala ou remove um metapacote
- - templatepkg: criar ou adiciona pacotes a um template
- - lspkg: lista pacotes instalados
- - jail-upgrade: faz o upgrade nas jaulas
- - rebuildpkg: reconstrói um pacote a partir de sua entrada no /var/log/packages
- - simplaret: obtém pacotes de repositórios locais ou remotos
- - createpkg: baixa, compila e empacota software de acordo com http://slack.sarava.org/slackbuilds
-
-A pasta de configuração e armazenamento de templates é a /etc/simplepkg. Templates são arquivos contendo
-uma lista de pacotes, um pacote por linha e com a extensão .template. Como exemplo, um template poderia se
-chamar minimo.template e conter a seguinte lista:
-
- aaa_base
- aaa_elflibs
- apache
- bash
- bin
- coreutils
- findutils
-
-Se você quiser também é possível usar um tagfile do slackware como template, sem nem precisar editá-lo.
-
-Instalando o simplepkg
-----------------------
-
-Para baixar o pacote do simplepkg, vá em http://slack.sarava.org/packages/noarch/.
-
- installpkg simplepkg-VERSAO-noarch-BUILD.tgz
-
-Configurando o simplepkg
-------------------------
-
-Como exemplo, vamos criar uma jaula baseada nos pacotes instalados no seu slackware. Edite o
-arquivo /etc/simplepkg/simplepkg.conf:
-
- # /etc/simplepkg/simplepkg.conf
- JAIL_ROOT="/vservers" # local onde as jaulas serão criadas
- SIMPLARET="simplaret" # programa que baixa os pacotes (pode ser o swaret se voce o tiver)
- STORAGE="/var/simplaret" # local onde o simplepkg armazena seus pacotes
- SIMPLARET_CLEAN="1" # apaga o cache de pacotes antes da instalação da jaula
- SIMPLARET_DELETE_DOWN="1" # apaga o cache de pacotes após a instalação
- SIMPLARET_UPDATE="0" # atualiza as listas de pacotes antes de iniciar a instalação da jaula
- SIMPLARET_PURGE_WEEKS="N" # apaga os pacotes do cache mais velhos que N semanas antes de instalar
- PATCHES_DIR="/var/simplaret/patches" # local os patches são armazenados
- DEFAULT_ARCH="i386"
- DEFAULT=VERSION="10.2"
- STORAGE="/storage/packages" # where simplepkg store packages
- PASSIVE_FTP="1"
-
-Para definir quais repositórios de pacotes você usará, edite o arquivo /etc/simplepkg/repos.conf,
-colocando algo como
-
- ROOT-i386="http://slack.sarava.org/packages/slackware"
- REPOS-i386="slack-sarava%http://slack.sarava.org/packages/slackware/slackware-10.2/"
- ROOT-x86_64-10.2="http://darkstar.ist.utl.pt/pub/slamd64/"
- REPOS-x86_64-10.2="slamd-sarava%http://slack.sarava.org/packages/slamd64/slamd64-10.2/"
-
-Para informações detalhadas sobre o simplaret, consulte seu artigo específico em http://slack.sarava.org/node/16
-
-Se você quer utilizar o swaret em lugar do simplaret, o swaret.conf deve estar bem configurado para que ele
-seja capaz de baixar e instalar todos os pacotes dos templates. Parâmetros como EXCLUDE podem ser um empecilho,
-e se você os remover da sua instalação tenha muito cuidado ao atualizar o seu sistema via swaret --upgrade.
-A desvantagem de usar o swaret é que você não terá como administrar jaulas e instalações de múltiplas arquiteturas.
-
-Criando jaulas e replicando instalações
----------------------------------------
-
- templatepkg meu-slackware
- mkjail jaula meu-slackware
-
-Isso cria o template meu-slackware a partir da sua lista de pacotes em /var/log/packages e cria uma nova árvore
-com esses pacotes na pasta /vservers/jaula (dependendo de qual o valor da variável JAIL_ROOT do simplepkg.conf, é claro).
-
-Se você quiser que alguns arquivos de configuração e executar scripts após a instalação dessa jaula, basta colocarmos na
-pasta /etc/simplepkg/meu-slackware.d/ os arquivos de configuração (dentro da hierarquia de pastas do sistema, isto é,
-/etc/simplepkg/meu-slackware.d/etc/apache/httpd.conf) e os script em /etc/simplepkg/meu-slackware.s/. O template vserver,
-que já vem no mkjail contém um exemplo de script.
-
-Você pode especificar também destinos alternativos para sua jaula, através de um comando do tipo
-
- ROOT=/mnt mkjail hda2 meu-slackware
-
-O comando acima faz exatamente o que você está pensando: replica sua instalação slackware em /mnt/hda2, dispensando
-totalmente o programa de instalação do slackware!
-
-Caso nenhum template for especificado, o mkjail utiliza o template /etc/simplepkg/default.template.
-
-Se você manter uma jaula em JAIL_ROOT com o mesmo nome que um template, é possível ainda usar o script jail-update
-para copiar todas as alterações de arquivos da jaula na pasta de arquivos do seu template (/etc/simplepkg/nome-da-jaula.d).
-Assim, basta que você copie todos os arquivos de configuração que você editou para essa pasta e deixar o jail-update numa
-crontab para que você tenha sempre um template atualizado e baseado nas jaulas / instalações que você tem rodando e que
-estiverem listadas no arquivo /etc/simplepkg/jailist:
-
- jail-update
-
-Para adicionar ou remover pacotes de um template, basta editar o arquivo de template. Uma outra forma de adicionar
-arquivos é usando o templatepkg com a opção -a, que adiciona apenas novos pacotes ao template. Se você quiser que o
-templatepkg crie um template a partir de uma jaula, simplesmente use
-
- templatepkg jaula /vservers/jaula
-
-Metapacotes
------------
-
-Outro uso dos templates é a criação de pacotes: imagine por exemplo a dificuldade de um usuário/a novo de slackware
-para instalar o cinelerra e todas as suas dependências. Criando um template contendo o nome de todos os pacotes
-necessários para rodar esse software permite que um usuário instale-o simplesmente com o comando
-
- metapkg --install cinelerra
-
-O comando sugere uma semelhança com o uso direto do swaret ou do slapt-get, com a única diferença residindo no
-modo como cada um desses programas lida com as dependências de um pacote. Os slapt-get suporta o arquivo
-slack-required, que pode ou não estar presente no pacote. Já o swaret possui uma ferramenta própria para a
-criação de uma lista de dependências.
-
-O simplepkg não pretende substituir esses dois modos de checagem e sim propor uma alternativa de distribuição
-de pacotes em que as dependências são resolvidas sem precisar de um repositório de dependências ou uma modificação
-no próprio pacote, que é o caso do slack-required, um arquivo que na maioria das vezes não está presente.
-
-A remoção de um aplicativo e todas as suas dependências podem ser feitas simplesmente com o comando
-
- metapkg --remove cinelerra
-
-Upgrade de jaulas
------------------
-
-O upgrade de jaulas que estejam em JAIL_ROOT pode ser efetuado com o comando jail-upgrade. Simplesmente coloque
-os patches em PATCHES_DIR e dê o comando
-
- jail-upgrade
-
-Se você quiser atualizar apenas uma das jaulas que estão em JAIL_ROOT, use
-
- jail-upgrade nome-da-jaula
-
-Para especificar uma pasta contendo patches diferente de PATCHES_DIR (útil quando você possui jaulas com
-diferentes versões do slackware), simplesmente use
-
- PATCHES=/local/dos/patches jail-upgrade nome-da-jaula
-
-De modo análogo ao mkjail, é possível indicar ao jail-upgrade uma outra pasta onde a jaula está armazenada:
-
- ROOT=/otherroot jail-upgrade
-
-Arquiteturas e versões diferentes
----------------------------------
-
-O simplepkg foi idealizado para permitir que um mesmo template possa ser usado para criar jaulas de
-arquiteturas e versões diferentes de sistemas padrão slackware. A atualização desses sistemas também
-é unificada. Essa possibilidade só é permitida se você usa o simplaret e não o swaret como ferramenta
-de obtenção de pacotes.
-
-Por exemplo, para criar uma instalação de slackware 10.1 (assumindo que suas definições de repositórios
-do /etc/simplepkg/repos.conf contenham locais com slack 10.1), basta usar o comando
-
- VERSION=10.1 mkjail minha-jaula template-servidor
-
-Arquiteturas diferentes também podem ser usadas. Se você está num sistema x86_64 e quer instalar um
-slack 10.2 numa partição, experimente
-
- ARCH=i386 VERSION=10.2 ROOT=/mnt mkjail hda2 meu-slackware
-
-Note que os templates independem de arquitetura e versão, já que eles só contém nomes de pacotes,
-arquivos de configuração e scripts. Por isso, o templatepkg, o metapkg, o lspkg e o jail-update
-funcionam normalmente.
-
-Para atualizar suas jaulas, o jail-upgrade checa antes qual a versão e arquitetura de cada uma
-de suas jaulas através do /etc/slackware-version correspondente e a partir disso aplica os patches
-da arquitetura e versão da mesma, usando para isso o simplaret (veja a documentação própria).
-
-Desse modo, mesmo que você tenha jaulas de versões e arquiteturas diversas, usar o comando "jail-upgrade"
-faz a atualização sem problemas, desde que seus patches estejam organizados por arquitetura e versão,
-conforme é detalhado na documentação do simplaret, em http://slack.sarava.org/node/16.
-
-Aplicativos auxiliares: rebuildpkg e createpkg
-----------------------------------------------
-
-O simplepkg acompanha ainda um aplicativo auxiliar que ajuda a recuperar pacotes instalados cujo tgz original
-foi perdido. O comando rebuildpkg reconstrói um pacote a partir de uma entrada no /var/log/packages. O comando
-
- rebuildpkg coreutils
-
-reconstrói um pacote do coreutils usando os arquivos e as metainformações listadas no arquivo
-do /var/log/packages/ correspondente ao coreutils.
-
-Se você quiser construir seus próprios pacotes baseados nos slackbuilds disponíveis em
-http://slack.sarava.org/slackbuilds, basta utilizar o createpkg:
-
- createpkg nome-do-pacote
-
-Fonte
------
-
-Se você quiser obter diretamente o código-fonte do simplepkg, baixe-o do repositório:
-
- svn checkout svn://slack.sarava.org/simplepkg
-
diff --git a/branches/0.6/doc/README.simplaret b/branches/0.6/doc/README.simplaret
deleted file mode 100644
index ce7efbd..0000000
--- a/branches/0.6/doc/README.simplaret
+++ /dev/null
@@ -1,143 +0,0 @@
-simplaret: simplepkg retrieval tool
------------------------------------
-
-Simplaret is a simplepkg tool used to download packages from local and remote repositories.
-With simplaret, one can grab packages for all archictectures and versions of slackware-like
-distributions that follows the mirror guidelines, allowing an easy management all
-jails and slackware installations in a machine, no matter wich arquiteture or version
-each one has.
-
-It was inspired in swaret behavior but don't tries to get its complexity level, but
-execute package download in a different way, where the local repository is organized
-by archictecture and version. It can also search for packages.
-
-Documentation
--------------
-
-The always updated english documentation is hosted at http://slack.sarava.org/node/17
-
-Downloading and installing
---------------------------
-
-Simplaret comes with simplepkg, wich installation and configuration is detailed
-at http://slack.sarava.org/node/15. Simplaret uses /etc/simplepkg/simplepkg.conf for
-its definitions and /etc/simplepkg/repos.conf for repository information.
-
-Repository organization
------------------------
-
-Simplaret local storage folder is defined through STORAGE parameter and is organized
-in this manner:
-
- $STORAGE/arch/version/
-
-Packages from contributed repositories (i.e, not from an official distro mirror) are
-stored at
-
- $STORAGE/arch/version/repository-name/
-
-This means, for example, that slack 10.2 packages are located in
-
- $STORAGE/i386/10.2/
-
-And the slack.sarava.org's slamd64 packages can be stored in a place such as
-
- $STORAGE/x86_64/10.2/slack.sarava.org/
-
-In the repository definition file (/etc/simplepkg/repos.conf), the entries must match
-the following schema, something that remembers a swaret.conf:
-
- ROOT-i386="http://slack.sarava.org/slackware/"
- ROOT-x86_64="http://ftp.heanet.ie/pub/slamd64/"
- REPOS-i386-10.2="slack.sarava.org%http://slack.sarava.org/packages/slackware/slackware-10.2/"
- REPOS-x86_64-10.2="slack.sarava.org%http://slack.sarava.org/packages/slamd64/slamd64-10.2/"
-
-Repositories defined as ROOT are those wich
-
- - Have packages from the official distro or
- - Are organized by version according to the mirror guidelines
-
-Repositories defined as REPOS are those containing packages from a specific version or
-non-oficial packages.
-
-When simplaret searches for a package, precedence is given first for ROOT definitions and then
-for REPOS ones. REPOS definitions should also include a identification name, delimited from
-the repository URL by the special sign %.
-
-Fetching the package list
--------------------------
-
-After configured, simplaret can fetch the package list with
-
- simplaret --update
-
-This updates the package list from arch defined in DEFAULT_ARCH and version from DEFAULT_VERSION.
-To fetch package listings for x86_64 (slamd64) and version 10.2, use
-
- ARCH=x86_64 VERSION=10.2 simplaret --update
-
-Searching
----------
-
-To search for a package, use the following commands as examples:
-
- simplaret --search coreutils
-
-for a Slack/390 package,
-
- ARCH=s390 simplaret --search x11
-
-for slack 10.1 with contributed i686 packages,
-
- ARCH=i686 VERSION=10.1 simplaret --search icecast
-
-Downloading
------------
-
-To download a package,
-
- simplaret --get icecast
-
-Simplaret downloads the first package found with the precedence explaned above.
-Future versions should contain an option to explicit get a package from a
-specific repository.
-
-Downloading patches
--------------------
-
-From the PATCHES_DIR parameter is possible to specify a folder where patches are
-placed, sorted by arch and version.
-
-Patches for slack 10.2 are always located at
-
- $PATCHES_DIR/i386/10.2/
-
-In reality, patches are downloaded with a "simplaret --get" and stored in the $STORAGE
-subfolder for its arch and version and a symlink is created in $PATCHES_DIR/$ARCH/$VERSION.
-
-To grab all patches from an arch and version, use
-
- ARCH=architecture VERSION=version simplaret --get-patches
-
-Purging the cache
------------------
-
-Simplaret cache from an arch and version can be purged with a
-
- simplaret --purge
-
-But why use that?
------------------
-
-You may ask why someone wishes to use such tool.
-
-Simplaret was written with a *x86 environment in mind, where lots of jails with different archs
-and versions are installed. Suppose a x86_64 with the following chroots installed:
-
- - slamd64 10.2
- - slackware 10.2
- - slackware 10.1 with additional i686 packages
- - uSlack (i386 uClibc)
-
-Keep all this stuff update manually is really a headache. Simplaret just tries to make it trivial.
-
diff --git a/branches/0.6/doc/README.simplaret.pt_BR b/branches/0.6/doc/README.simplaret.pt_BR
deleted file mode 100644
index 7b1cd58..0000000
--- a/branches/0.6/doc/README.simplaret.pt_BR
+++ /dev/null
@@ -1,148 +0,0 @@
-simplaret: ferramenta para obtenção de pacotes
-----------------------------------------------
-
-O simplaret é a ferramenta do simplepkg utilizada para obter pacotes de repositórios locais
-ou remotos. Com ele, você pode não só baixar pacotes do seu sistema slackware como também pode
-baixar de qualquer versão ou arquitetura cujo repositório siga os Mirror Guidelines do slackware,
-permitindo que você gerencie facilmente todas as suas jaulas e instalações de slackware,
-independentemente da arquitetura ou versão que elas utilizem.
-
-Ele foi inspirado no comportamento do swaret mas não pretende de modo algum chegar no nível de
-complexidade deste, mas sim executar a obtenção de pacotes de um modo diferente. Sua finalidade
-é apenas baixar pacotes para que os aplicativos do simplepkg possam utilizá-lo posteriormente.
-O simplaret ainda pode ser usado sozinho para procurar e baixar pacotes.
-
-Documentação
-------------
-
-A documentação atualizada do simplaret se encontra em http://slack.sarava.org/node/16
-
-Obtendo e instalando
---------------------
-
-O simplaret acompanha o simplepkg e por isso sua instalação e configuração é dada no artigo do simplepkg.
-Ele utiliza o mesmo arquivo de configuração do simplepkg, o /etc/simplepkg/simplepkg.conf e guarda as
-definições de repositórios em /etc/simplepkg/repos.conf.
-
-Organização do repositório
---------------------------
-
-O repositório de armazenamento local do simplaret é definido pelo parâmetro STORAGE e é organizado
-da seguinte maneira:
-
- $STORAGE/arch/version/
-
-Pacotes obtidos num repositório que não seja oficial da distribuição ficam em
-
- $STORAGE/arch/version/repository-name/
-
-Isso quer dizer, por exemplo, que pacotes do slackware 10.2 ficariam em
-
- $STORAGE/i386/10.2/
-
-e os pacotes obtidos a partir do repositório slamd64 do slack.sarava.org ficaria, por exemplo, em
-
- $STORAGE/x86_64/10.2/slack.sarava.org/
-
-No arquivo de repositórios (/etc/simplepkg/repos.conf), as definições de repositório seguem o
-seguinte esquema, semelhante ao formato de configuração do swaret:
-
- ROOT-i386="http://slack.sarava.org/slackware/"
- ROOT-x86_64="http://ftp.heanet.ie/pub/slamd64/"
- REPOS-i386-10.2="slack.sarava.org%http://slack.sarava.org/packages/slackware/slackware-10.2/"
- REPOS-x86_64-10.2="slack.sarava.org%http://slack.sarava.org/packages/slamd64/slamd64-10.2/"
-
-Repositórios definidos como ROOT são aqueles que
-
- - Possuem pacotes da distribuição oficial ou
- - Estão organizados por versão, de acordo com os mirror guidelines
-
-Já os repositórios definidos como REPOS são aqueles que contém pacotes para uma versão específica e/ou
-que são não-oficiais.
-
-Quando o simplaret busca ou obtém um pacote, a precedência pelos repositórios é dada às definições de
-ROOT e em seguinda às de REPOS. As definições REPOS ainda devem possuir, além da URL do repositório, um
-nome para identificá-lo, sendo que esses dois campos são separados por um delimitador.
-
-Baixando as listas de pacotes
------------------------------
-
-Após configurá-lo, é preciso atualizar a lista de pacotes:
-
- simplaret --update
-
-Isso atualiza a lista de pacotes da arquitetura definida em DEFAULT_ARCH e da versão DEFAULT_VERSION
-apenas. Se você quiser forçar a atualização, por exemplo, para a arquitetura x86_64 (slamd64)
-e versão 10.2, basta
-
- ARCH=x86_64 VERSION=10.2 simplaret --update
-
-Buscando pacotes
-----------------
-
-Para buscar um pacote, esses comandos servem de exemplo:
-
- simplaret --search coreutils
-
-pacote para o Slack/390,
-
- ARCH=s390 simplaret --search x11
-
-e para slackware 10.1 com pacotes adicionais em i686,
-
- ARCH=i686 VERSION=10.1 simplaret --search icecast
-
-Baixando um pacote
-------------------
-
-Para baixar um pacote:
-
- simplaret --get icecast
-
-O simplaret baixa o primeiro pacote na ordem de precedência dos repositórios.
-Versões futuras deverão conter uma opção que force a obtenção do pacote de um
-repositório específico.
-
-Baixando patches
-----------------
-
-Através do parâmetro de configuração PATCHES_DIR é possível especificar uma pasta
-onde os patches de cada distribuição serão armazenados, organizados também por arquitetura.
-
-Por exemplo, patches do slackware 10.2 ficarão sempre em
-
- $PATCHES_DIR/i386/10.2/
-
-Os patches na verdade são baixados através de um "simplaret --get" e armazenados na subpasta
-de $STORAGE correspondente e apenas um link simbólico é mantido em $PATCHES_DIR/$ARCH/$VERSION.
-
-Para baixar os patches, use uma chamada do tipo
-
- ARCH=arquitetura VERSION=versao simplaret --get-patches
-
-E os patches dessa arquitetura e versão serão baixados.
-
-Apagando pacotes
-----------------
-
-O repositório de pacotes de uma arquitetura e versão pode ser apagado com o comando
-
- simplaret --purge
-
-Mas pra quê serve isso?
------------------------
-
-Você pode estar se perguntando: quem utilizaria uma ferramenta que baixa pacotes de várias arquiteturas?
-
-O simplaret foi escrito tendo em mente um ambiente *86 onde várias jaulas de diferentes arquiteturas estão
-instaladas. Suponha por exemplo uma máquina x86_64 que possua as seguintes jaulas:
-
- - slamd64 11.0
- - slackware 11.0
- - slackware 11.0 com pacotes adicionais em i686
- - ucslack (uClibc para i386)
-
-O condenado/a em questão que roda todas essas jaulas, pelos mais diversos motivos, pode ter uma grande dor
-de cabeça para manter os pacotes em ordem de forma manual. Com o simplaret e eventualmente com o simplepkg,
-a tarefa se torna trivial.
-
diff --git a/branches/0.6/doc/TODO b/branches/0.6/doc/TODO
deleted file mode 100644
index 9178f6e..0000000
--- a/branches/0.6/doc/TODO
+++ /dev/null
@@ -1,5 +0,0 @@
-simplepkg todo list
--------------------
-
-TODO list at http://slack.sarava.org/wiki/Main/SimplePKG
-
diff --git a/branches/0.6/doc/simplepkg.aux b/branches/0.6/doc/simplepkg.aux
deleted file mode 100644
index ad47a5f..0000000
--- a/branches/0.6/doc/simplepkg.aux
+++ /dev/null
@@ -1,30 +0,0 @@
-\relax
-\catcode`"\active
-\ifx\hyper@anchor\@undefined
-\global \let \oldcontentsline\contentsline
-\gdef \contentsline#1#2#3#4{\oldcontentsline{#1}{#2}{#3}}
-\global \let \oldnewlabel\newlabel
-\gdef \newlabel#1#2{\newlabelxx{#1}#2}
-\gdef \newlabelxx#1#2#3#4#5#6{\oldnewlabel{#1}{{#2}{#3}}}
-\AtEndDocument{\let \contentsline\oldcontentsline
-\let \newlabel\oldnewlabel}
-\else
-\global \let \hyper@last\relax
-\fi
-
-\select@language{brazilian}
-\@writefile{toc}{\select@language{brazilian}}
-\@writefile{lof}{\select@language{brazilian}}
-\@writefile{lot}{\select@language{brazilian}}
-\newlabel{start}{{}{1}{\relax }{}{}}
-\@writefile{toc}{\contentsline {section}{\numberline {1}Descri\c c\~ao}{1}{section.1}}
-\@writefile{toc}{\contentsline {section}{\numberline {2}Arquitetura}{2}{section.2}}
-\@writefile{toc}{\contentsline {section}{\numberline {3}Instalando o simplepkg}{2}{section.3}}
-\@writefile{toc}{\contentsline {section}{\numberline {4}Configurando o simplepkg}{3}{section.4}}
-\@writefile{toc}{\contentsline {section}{\numberline {5}Criando jaulas e replicando instala\c c\~oes}{3}{section.5}}
-\@writefile{toc}{\contentsline {section}{\numberline {6}Metapacotes}{4}{section.6}}
-\@writefile{toc}{\contentsline {section}{\numberline {7}Upgrade de jaulas}{5}{section.7}}
-\@writefile{toc}{\contentsline {section}{\numberline {8}Arquiteturas e vers\~oes diferentes}{5}{section.8}}
-\@writefile{toc}{\contentsline {section}{\numberline {9}Aplicativo auxiliar: rebuildpkg}{6}{section.9}}
-\@writefile{toc}{\contentsline {section}{\numberline {10}Fonte}{6}{section.10}}
-\@writefile{toc}{\contentsline {section}{\numberline {11}P\'agina de desenvolvimento}{6}{section.11}}
diff --git a/branches/0.6/doc/simplepkg.dvi b/branches/0.6/doc/simplepkg.dvi
deleted file mode 100644
index 2779fbe..0000000
--- a/branches/0.6/doc/simplepkg.dvi
+++ /dev/null
Binary files differ
diff --git a/branches/0.6/doc/simplepkg.html b/branches/0.6/doc/simplepkg.html
deleted file mode 100644
index 85b2b06..0000000
--- a/branches/0.6/doc/simplepkg.html
+++ /dev/null
@@ -1,201 +0,0 @@
-O <i>simplepkg</i> é um sistema de gerenciamento de pacotes que roda sobre o <i>pkgtool</i> e o <i>swaret</i>. Ele trabalha com templates -- listas com pacotes instalados, scripts e arquivos de configuração -- permitindo criar perfis de instalação que podem ser então usados para instalar o sistema numa outra partição, criar um chroot específico ou até trabalhar com o conceito de <i>metapacotes</i>: uma lista de pacotes que pode ser instalada e removida com apenas um comando.
-<!--break-->
-<b>Descrição</b>
-
-Todas as distribuições de GNU/Linux já tem algum sistema de empacotamento amadurecido. A questão agora é a praticidade de instalar e controlar o que está instalado, tanto pacotes como arquivos de configuração de uma máquina.
-
-Imagine por exemplo se você precisa manter uma lista de pacotes de 200 máquinas slackware, sendo que algumas são usadas como desktop, outras como servidores web, alguma sendo o servidor de email e assim por diante. Imagine agora que você perca o disco de algumas dessas máquinas ou que precise cotidianamente reinstalar ou atualizar um sistema.
-
-Usar o cd de instalação do slackware e configurar na mão toda a vez que der um pau faria com que você ficasse louco/a e desperdiçasse muito tempo, além do que sempre ocorre de esquecermos algum detalhe ou pacote durante a configuração do sistema. Manter um backup completo de cada máquina, por outro lado, pode ser muito custoso se o número delas for muito grande.
-
-O simplepkg permite que você mantenha um template para cada grupo de máquinas e com apenas um comando instalar o template numa partição. Além do template, você precisa do <i>swaret</i> configurado para os repositórios de pacote que possuem seus aplicativos.
-
-Gerenciar instalações e metapacotes não é tudo o que o simplepkg faz. Ele pode ser usado até na criação de <i>vservers</i>. O simplepkg inclusive é um amadurecimento de idéias delineadas nos seguintes artigos:
-
-- <a href="/node/3">Rodando o OpenOffice.org em chroot no Slamd64</a>
-- <a href="/node/6">Linux Vservers e segurança por contexto</a>
-- <a href="/node/7">Instalando o Slackware sem programa de instalação</a>
-
-O <i>simplepkg</i> permite que o trampo proposto nos artigos acima seja simplificado a uma meia dúzia de comandos, desde que existam templates prontos.
-
-<b>Arquitetura</b>
-
-O <i>simplepkg</i> é um conjunto de scripts escritos com a filosofia KISS em mente. Ele é um sistema muito simples, composto pelos seguintes comandos:
-
-- mkjail: constrói uma jaula/instalação de slackware numa pasta
-- metapkg: instala ou remove um metapacote
-- templatepkg: criar ou adiciona pacotes a um template
-- lspkg: lista pacotes instalados
-- jail-upgrade: faz o upgrade nas jaulas
-- rebuildpkg: reconstrói um pacote a partir de sua entrada no <i>/var/log/packages</i>
-
-A pasta de configuração e armazenamento de templates é a <i>/etc/simplepkg</i>. Templates são arquivos contendo uma lista de pacotes, um pacote por linha e com a extensão <i>.template</i>. Como exemplo, um template poderia se chamar <i>minimo.template</i> e conter a seguinte lista:
-
-
-<pre>
-aaa_base
-aaa_elflibs
-apache
-bash
-bin
-coreutils
-findutils
-</pre>
-
-<br>&nbsp;<br>&nbsp;<br>&nbsp;<br>&nbsp;<br>&nbsp;<br>&nbsp;<br>&nbsp;
-Se você quiser também é possível usar um <i>tagfile</i> do slackware como template, sem nem precisar editá-lo.
-
-<b>Instalando o simplepkg</b>
-
-Para baixar o pacote do simplepkg, vá em http://slack.midiatatica.org/packages/noarch/. Depois de instalá-lo, não esqueça de configurar seu <i>swaret</i>:
-
-<pre>
-installpkg swaret-VERSAO-noarch-BUILD.tgz simplepkg-VERSAO-noarch-BUILD.tgz
-</pre>
-
-<br>&nbsp;
-Alternativamente, se você já está com o swaret instalado, adicione em seu <i>swaret.conf</i> a linha
-
-<pre>
-REPOS_ROOT=SlackMidiataticaNoarch%http://slack.midiatatica.org/packages/noarch
-</pre>
-
-<br>&nbsp;
-e então digite
-
-<pre>
-swaret --update
-swaret --install simplepkg
-</pre>
-
-<br>&nbsp;<br>&nbsp;
-<b>Configurando o simplepkg</b>
-
-Como exemplo, vamos criar uma jaula baseada nos pacotes instalados no seu slackware. Edite o arquivo <i>/etc/simplepkg/simplepkg.conf</i>:
-
-<pre>
-# /etc/simplepkg/simplepkg.conf
-JAIL_ROOT="/vservers" # local onde as jaulas serão criadas
-SWARET_PACKS="/var/swaret" # local onde o swaret armazena seus pacotes
-SWARET_CLEAN="1" # apaga o cache de pacotes antes da instalação da jaula
-SWARET_DELETE_DOWN="1" # apaga o cache de pacotes após a instalação
-SWARET_UPDATE="0" # executa um swaret --update antes de iniciar a instalação da jaula
-SWARET_PURGE_WEEKS="N" # apaga os pacotes do cache mais velhos que N semanas antes de instalar
-PATCHES_DIR="/var/swaret/patches" # local os patches são armazenados
-</pre>
-
-<br>&nbsp;<br>&nbsp;<br>&nbsp;<br>&nbsp;<br>&nbsp;<br>&nbsp;<br>&nbsp;<br>&nbsp;<br>&nbsp;
-O <i>swaret.conf</i> deve estar bem configurado para que ele seja capaz de baixar e instalar todos os pacotes dos templates. Parâmetros como <i>EXCLUDE</i> podem ser um empecilho, e se você os remover da sua instalação tenha muito cuidado ao atualizar o seu sistema via <i>swaret --upgrade</i>.
-
-<b>Criando jaulas e replicando instalações</b>
-
-<pre>
-templatepkg meu-slackware
-mkjail jaula meu-slackware
-</pre>
-
-<br>&nbsp;<br>&nbsp;
-Isso cria o template <i>meu-slackware</i> a partir da sua lista de pacotes em <i>/var/log/packages</i> e cria uma nova árvore com esses pacotes na pasta <i>/vservers/jaula</i> (dependendo de qual o valor da variável <i>JAIL_ROOT</i> do simplepkg.conf, é claro).
-
-Se você quiser que alguns arquivos de configuração e executar scripts após a instalação dessa jaula, basta colocarmos na pasta <i>/etc/simplepkg/meu-slackware.d/</i> os arquivos de configuração (dentro da hierarquia de pastas do sistema, isto é, <i>/etc/simplepkg/meu-slackware.d/etc/apache/httpd.conf</i>) e os script em <i>/etc/simplepkg/meu-slackware.s/</i>. O template <i>vserver</i>, que já vem no mkjail contém um exemplo de script.
-
-Você pode especificar também destinos alternativos para sua jaula, através de um comando do tipo
-
-<pre>
-ROOT=/mnt mkjail hda2 meu-slackware
-</pre>
-
-<br>&nbsp;
-O comando acima faz exatamente o que você está pensando: replica sua instalação slackware em </i>/mnt/hda2</i>, dispensando totalmente o programa de instalação do slackware!
-
-Caso nenhum template for especificado, o <i>mkjail</i> utiliza o template <i>/etc/simplepkg/default.template</i>.
-
-Se você manter uma jaula em <i>JAIL_ROOT</i> com o mesmo nome que um template, é possível ainda usar o script <i>jail-update</i> para copiar todas as alterações de arquivos da jaula na pasta de arquivos do seu template (<i>/etc/simplepkg/nome-da-jaula.d</i>). Assim, basta que você copie todos os arquivos de configuração que você editou para essa pasta e deixar o <i>jail-update</i> numa crontab para que você tenha sempre um template atualizado e baseado nas jaulas / instalações que você tem rodando e que estiverem listadas no arquivo <i>/etc/simplepkg/jailist</i>:
-
-<pre>
-jail-update
-</pre>
-
-<br>&nbsp;
-O <i>jail-update</i> considera que o template <i>main</i>, caso exista, se refere à instalação principal da sua máquina, isto é, o sistema de você roda. Dessa forma a invocação do <i>jail-update</i> atualiza todos os templates cujas jaulas estão em <i>JAIL_ROOT</i> e ainda atualiza o template da instalação principal.
-
-Para adicionar ou remover pacotes de um template, basta editar o arquivo de template. Uma outra forma de adicionar arquivos é usando o <i>templatepkg</i> com a opção <i>-a</i>, que adiciona apenas novos pacotes ao template. Se você quiser que o <i>templatepkg</i> crie um template a partir de uma jaula, simplesmente use
-
-<pre>
-templatepkg jaula /vservers/jaula
-</pre>
-
-<br>&nbsp;
-<b>Metapacotes</b>
-
-Outro uso dos templates é a criação de pacotes: imagine por exemplo a dificuldade de um usuário/a novo de slackware para instalar o cinelerra e todas as suas dependências. Criando um template contendo o nome de todos os pacotes necessários para rodar esse software permite que um usuário instale-o simplesmente com o comando
-
-<pre>
-metapkg --install cinelerra
-</pre>
-
-<br>&nbsp;
-O comando sugere uma semelhança com o uso direto do <i>swaret</i> ou do <i>slapt-get</i>, com a única diferença residindo no modo como cada um desses programas lida com as dependências de um pacote. Os <i>slapt-get</i> suporta o arquivo <i>slack-required</i>, que pode ou não estar presente no pacote. Já o <i>swaret</i> possui uma ferramenta própria para a criação de uma lista de dependências.
-
-O <i>simplepkg</i> não pretende substituir esses dois modos de checagem e sim propor uma alternativa de distribuição de pacotes em que as dependências são resolvidas sem precisar de um repositório de dependências ou uma modificação no próprio pacote, que é o caso do <i>slack-required</i>, um arquivo que na maioria das vezes não está presente.
-
-A remoção de um aplicativo e todas as suas dependências podem ser feitas simplesmente com o comando
-
-<pre>
-metapkg --remove cinelerra
-</pre>
-
-<br>&nbsp;
-<b>Upgrade de jaulas</b>
-
-O upgrade de jaulas que estejam em <i>JAIL_ROOT</i> pode ser efetuado com o comando <i>jail-upgrade</i>. Simplesmente coloque os patches em <i>PATCHES_DIR</i> e dê o comando
-
-<pre>
-jail-upgrade
-</pre>
-
-<br>&nbsp;
-Se você quiser atualizar apenas uma das jaulas que estão em <i>JAIL_ROOT</i>, use
-
-<pre>
-jail-upgrade nome-da-jaula
-</pre>
-
-<br>&nbsp;
-Para especificar uma pasta contendo patches diferente de <i>PATCHES_DIR</i> (útil quando você possui jaulas com diferentes versões do slackware), simplesmente use
-
-<pre>
-PATCHES=/local/dos/patches jail-upgrade nome-da-jaula
-</pre>
-
-<br>&nbsp;
-De modo análogo ao <i>mkjail</i>, é possível indicar ao <i>jail-upgrade</i> uma outra pasta onde a jaula está armazenada:
-
-<pre>
-ROOT=/otherroot jail-upgrade
-</pre>
-
-<br>&nbsp;
-<b>Aplicativo auxiliar: rebuildpkg</b>
-
-O simplepkg acompanha ainda um aplicativo auxiliar que ajuda a recuperar pacotes instalados cujo tgz original foi perdido. O comando <i>rebuildpkg</i> reconstrói um pacote a partir de uma entrada no <i>/var/log/packages</i>. O comando
-
-<pre>
-rebuildpkg coreutils
-</pre>
-
-<br>&nbsp;
-reconstrói um pacote do coreutils usando os arquivos e as metainformações listadas no arquivo do <i>/var/log/packages/</i> correspondente ao coreutils.
-
-<b>Fonte</b>
-
-Se você quiser obter diretamente o código-fonte do <i>simplepkg</i>, baixe-o do repositório:
-
-<pre>
-svn checkout svn://slack.midiatatica.org:40/simplepkg
-</pre>
-
-<br>&nbsp;
-<b>Página de desenvolvimento</b>
-
-A página de desenvolvimento do <i>simplepkg</i> fica <a href="http://slack.midiatatica.org/wiki/Main/SimplePKG">aqui</a>.
diff --git a/branches/0.6/doc/simplepkg.log b/branches/0.6/doc/simplepkg.log
deleted file mode 100644
index c6a55ef..0000000
--- a/branches/0.6/doc/simplepkg.log
+++ /dev/null
@@ -1,286 +0,0 @@
-This is TeX, Version 3.14159 (Web2C 7.4.5) (format=latex 2005.1.14) 10 FEB 2006 12:19
-**simplepkg.tex
-(./simplepkg.tex
-LaTeX2e <2001/06/01>
-Babel <v3.7h> and hyphenation patterns for american, french, german, ngerman, n
-ohyphenation, loaded.
-(/usr/share/texmf/tex/latex/base/article.cls
-Document Class: article 2001/04/21 v1.4e Standard LaTeX document class
-(/usr/share/texmf/tex/latex/base/size10.clo
-File: size10.clo 2001/04/21 v1.4e Standard LaTeX file (size option)
-)
-\c@part=\count79
-\c@section=\count80
-\c@subsection=\count81
-\c@subsubsection=\count82
-\c@paragraph=\count83
-\c@subparagraph=\count84
-\c@figure=\count85
-\c@table=\count86
-\abovecaptionskip=\skip41
-\belowcaptionskip=\skip42
-\bibindent=\dimen102
-)
-(/usr/share/texmf/tex/generic/babel/babel.sty
-Package: babel 2001/03/01 v3.7h The Babel package
-
-(/usr/share/texmf/tex/generic/babel/portuges.ldf
-Language: portuges 2001/02/16 v1.2o Portuguese support from the babel system
-
-(/usr/share/texmf/tex/generic/babel/babel.def
-File: babel.def 2001/03/01 v3.7h Babel common definitions
-\babel@savecnt=\count87
-\U@D=\dimen103
-)
-
-Package babel Warning: No hyphenation patterns were loaded for
-(babel) the language `Portuguese'
-(babel) I will use the patterns loaded for \language=0 instead.
-
-\l@portuges = a dialect from \language0
-\l@brazilian = a dialect from \language\l@portuges
-Package babel Info: Making " an active character on input line 126.
-)) (/usr/share/texmf/tex/latex/base/inputenc.sty
-Package: inputenc 2001/07/10 v0.99a Input encoding file
-
-(/usr/share/texmf/tex/latex/base/latin1.def
-File: latin1.def 2001/07/10 v0.99a Input encoding file
-))
-(/usr/share/texmf/tex/latex/graphics/graphics.sty
-Package: graphics 2001/07/07 v1.0n Standard LaTeX Graphics (DPC,SPQR)
-
-(/usr/share/texmf/tex/latex/graphics/trig.sty
-Package: trig 1999/03/16 v1.09 sin cos tan (DPC)
-)
-(/usr/share/texmf/tex/latex/config/graphics.cfg
-File: graphics.cfg 2001/08/31 v1.1 graphics configuration of teTeX/TeXLive
-)
-Package graphics Info: Driver file: dvips.def on input line 80.
-
-(/usr/share/texmf/tex/latex/graphics/dvips.def
-File: dvips.def 1999/02/16 v3.0i Driver-dependant file (DPC,SPQR)
-))
-(/usr/share/texmf/tex/latex/hyperref/hyperref.sty
-Package: hyperref 2003/01/22 v6.73n Hypertext links for LaTeX
-
-(/usr/share/texmf/tex/latex/graphics/keyval.sty
-Package: keyval 1999/03/16 v1.13 key=value parser (DPC)
-\KV@toks@=\toks14
-)
-\@linkdim=\dimen104
-\Hy@linkcounter=\count88
-\Hy@pagecounter=\count89
-
-(/usr/share/texmf/tex/latex/hyperref/pd1enc.def
-File: pd1enc.def 2003/01/22 v6.73n Hyperref: PDFDocEncoding definition (HO)
-)
-(/usr/share/texmf/tex/latex/config/hyperref.cfg
-File: hyperref.cfg 2002/06/06 v1.2 hyperref configuration of TeXLive and teTeX
-)
-Package hyperref Info: Hyper figures OFF on input line 1792.
-Package hyperref Info: Link nesting OFF on input line 1797.
-Package hyperref Info: Hyper index ON on input line 1800.
-Package hyperref Info: Plain pages ON on input line 1805.
-Package hyperref Info: Backreferencing OFF on input line 1812.
-
-Implicit mode ON; LaTeX internals redefined
-Package hyperref Info: Bookmarks ON on input line 1916.
-(/usr/share/texmf/tex/latex/html/url.sty
-Package: url 1999/03/02 ver 1.4 Verb mode for urls, email addresses, and file
- names
-)
-LaTeX Info: Redefining \url on input line 2055.
-\Fld@menulength=\count90
-\Field@Width=\dimen105
-\Fld@charsize=\dimen106
-\Choice@toks=\toks15
-\Field@toks=\toks16
-Package hyperref Info: Hyper figures OFF on input line 2513.
-Package hyperref Info: Link nesting OFF on input line 2518.
-Package hyperref Info: Hyper index ON on input line 2521.
-Package hyperref Info: backreferencing OFF on input line 2528.
-Package hyperref Info: Link coloring OFF on input line 2533.
-\c@Item=\count91
-\c@Hfootnote=\count92
-)
-*hyperref using default driver hdvips*
-(/usr/share/texmf/tex/latex/hyperref/hdvips.def
-File: hdvips.def 2003/01/22 v6.73n Hyperref driver for dvips
-
-(/usr/share/texmf/tex/latex/hyperref/pdfmark.def
-File: pdfmark.def 2003/01/22 v6.73n Hyperref definitions for pdfmark specials
-\pdf@docset=\toks17
-\pdf@box=\box26
-\pdf@toks=\toks18
-\pdf@defaulttoks=\toks19
-\Fld@listcount=\count93
-\@outlinefile=\write3
-)) (./simplepkg.aux)
-\openout1 = `simplepkg.aux'.
-
-LaTeX Font Info: Checking defaults for OML/cmm/m/it on input line 11.
-LaTeX Font Info: ... okay on input line 11.
-LaTeX Font Info: Checking defaults for T1/cmr/m/n on input line 11.
-LaTeX Font Info: ... okay on input line 11.
-LaTeX Font Info: Checking defaults for OT1/cmr/m/n on input line 11.
-LaTeX Font Info: ... okay on input line 11.
-LaTeX Font Info: Checking defaults for OMS/cmsy/m/n on input line 11.
-LaTeX Font Info: ... okay on input line 11.
-LaTeX Font Info: Checking defaults for OMX/cmex/m/n on input line 11.
-LaTeX Font Info: ... okay on input line 11.
-LaTeX Font Info: Checking defaults for U/cmr/m/n on input line 11.
-LaTeX Font Info: ... okay on input line 11.
-LaTeX Font Info: Checking defaults for PD1/pdf/m/n on input line 11.
-LaTeX Font Info: ... okay on input line 11.
-Package hyperref Info: Link coloring OFF on input line 11.
-
-(/usr/share/texmf/tex/latex/hyperref/nameref.sty
-Package: nameref 2001/01/27 v2.19 Cross-referencing by name of section
-\c@section@level=\count94
-)
-LaTeX Info: Redefining \ref on input line 11.
-LaTeX Info: Redefining \pageref on input line 11.
- (./simplepkg.out)
-(./simplepkg.out)
-\openout3 = `simplepkg.out'.
-
-LaTeX Font Info: External font `cmex10' loaded for size
-(Font) <12> on input line 13.
-LaTeX Font Info: External font `cmex10' loaded for size
-(Font) <8> on input line 13.
-LaTeX Font Info: External font `cmex10' loaded for size
-(Font) <6> on input line 13.
-LaTeX Font Info: Try loading font information for OMS+cmr on input line 31.
- (/usr/share/texmf/tex/latex/base/omscmr.fd
-File: omscmr.fd 1999/05/25 v2.5h Standard LaTeX font definitions
-)
-LaTeX Font Info: Font shape `OMS/cmr/m/n' in size <10> not available
-(Font) Font shape `OMS/cmsy/m/n' tried instead on input line 31.
- [1
-
-]
-Overfull \hbox (15.53741pt too wide) in paragraph at lines 48--49
-[]\OT1/cmr/m/n/10 rebuildpkg: re-con-str^^Soi um pa-cote a par-tir de sua en-tr
-ada no \OT1/cmr/m/it/10 /var/log/packages
- []
-
-
-Overfull \hbox (40.63974pt too wide) in paragraph at lines 68--69
-\OT1/cmr/m/n/10 Para baixar o pa-cote do sim-plepkg, v^^Sa em http://slack.midi
-atatica.org/packages/noarch/.
- []
-
-
-Overfull \hbox (64.49643pt too wide) in paragraph at lines 78--78
-[]\OT1/cmtt/m/n/10 REPOS_ROOT=SlackMidiataticaNoarch%http://slack.midiatatica.o
-rg/packages/noarch[]
- []
-
-[2]
-Overfull \hbox (122.24593pt too wide) in paragraph at lines 101--101
-[]\OT1/cmtt/m/n/10 SIMPLARET="simplaret" # programa que baixa os pacotes (pode
-ser o swaret se voce o tiver)[]
- []
-
-
-Overfull \hbox (11.99689pt too wide) in paragraph at lines 101--101
-[]\OT1/cmtt/m/n/10 STORAGE="/var/simplaret" # local onde o swaret armazena seus
- pacotes[]
- []
-
-
-Overfull \hbox (48.74657pt too wide) in paragraph at lines 101--101
-[]\OT1/cmtt/m/n/10 SIMPLARET_CLEAN="1" # apaga o cache de pacotes antes da inst
-ala^^Xc~ao da jaula[]
- []
-
-
-Overfull \hbox (22.4968pt too wide) in paragraph at lines 101--101
-[]\OT1/cmtt/m/n/10 SIMPLARET_DELETE_DOWN="1" # apaga o cache de pacotes ap^^Sos
- a instala^^Xc~ao[]
- []
-
-
-Overfull \hbox (132.74583pt too wide) in paragraph at lines 101--101
-[]\OT1/cmtt/m/n/10 SIMPLARET_UPDATE="0" # atualiza as listas de pacotes antes d
-e iniciar a instala^^Xc~ao da jaula[]
- []
-
-
-Overfull \hbox (116.99597pt too wide) in paragraph at lines 101--101
-[]\OT1/cmtt/m/n/10 SIMPLARET_PURGE_WEEKS="N" # apaga os pacotes mais velhos que
- N semanas antes de instalar[]
- []
-
-
-Overfull \hbox (27.74675pt too wide) in paragraph at lines 101--101
-[]\OT1/cmtt/m/n/10 PATCHES_DIR="/var/simplaret/patches" # local os patches s~ao
- armazenados[]
- []
-
-
-Overfull \hbox (77.7997pt too wide) in paragraph at lines 103--104
-[]\OT1/cmr/m/n/10 Para definir quais reposit^^Sorios de pa-cotes voc^e usar^^Sa
-, edite o ar-quivo \OT1/cmr/m/it/10 /etc/simplepkg/repos.conf\OT1/cmr/m/n/10 ,
- []
-
-
-Overfull \hbox (64.49643pt too wide) in paragraph at lines 110--110
-[]\OT1/cmtt/m/n/10 REPOS-i386="slack-midiatatica%http://slack.midiatatica.org/p
-ackages/slackware"[]
- []
-
-
-Overfull \hbox (90.7462pt too wide) in paragraph at lines 110--110
-[]\OT1/cmtt/m/n/10 REPOS-x86_64-10.2="slamd-midiatatica%http://slack.midiatatic
-a.org/packages/slamd64"[]
- []
-
-
-Overfull \hbox (16.50899pt too wide) in paragraph at lines 123--124
-\OT1/cmr/m/it/10 /var/log/packages \OT1/cmr/m/n/10 e cria uma nova ^^Sarvore co
-m esses pa-cotes na pasta \OT1/cmr/m/it/10 /vservers/jaula
- []
-
-
-Overfull \hbox (12.48833pt too wide) in paragraph at lines 125--126
-\OT1/cmr/m/n/10 in-stala^^Xc~ao dessa jaula, basta colo-car-mos na pasta \OT1/c
-mr/m/it/10 /etc/simplepkg/meu-slackware.d/
- []
-
-
-Overfull \hbox (54.39502pt too wide) in paragraph at lines 125--126
-\OT1/cmr/m/it/10 /etc/simplepkg/meu-slackware.d/etc/apache/httpd.conf\OT1/cmr/m
-/n/10 ) e os script em \OT1/cmr/m/it/10 /etc/simplepkg/meu-
- []
-
-[3]
-Overfull \hbox (97.57161pt too wide) in paragraph at lines 135--136
-[]\OT1/cmr/m/n/10 Caso nen-hum tem-plate for es-peci-fi-cado, o \OT1/cmr/m/it/1
-0 mk-jail \OT1/cmr/m/n/10 uti-liza o tem-plate \OT1/cmr/m/it/10 /etc/simplepkg/
-default.template\OT1/cmr/m/n/10 .
- []
-
-[4] [5]
-Overfull \hbox (13.77249pt too wide) in paragraph at lines 231--232
-\OT1/cmr/m/n/10 Se voc^e quiser obter di-re-ta-mente o c^^Sodigo-fonte do \OT1/
-cmr/m/it/10 sim-plepkg\OT1/cmr/m/n/10 , baixe-o do reposit^^Sorio:
- []
-
-
-Overfull \hbox (17.25352pt too wide) in paragraph at lines 239--240
-\OT1/cmr/m/n/10 A p^^Sagina do \OT1/cmr/m/it/10 sim-plepkg \OT1/cmr/m/n/10 fica
- em [][][][].
- []
-
-[6] (./simplepkg.aux) )
-Here is how much of TeX's memory you used:
- 2420 strings out of 95847
- 32073 string characters out of 1195948
- 90698 words of memory out of 1000001
- 5358 multiletter control sequences out of 10000+50000
- 8746 words of font info for 31 fonts, out of 500000 for 1000
- 14 hyphenation exceptions out of 1000
- 25i,6n,36p,605b,344s stack positions out of 1500i,500n,5000p,200000b,5000s
-
-Output written on simplepkg.dvi (6 pages, 25288 bytes).
diff --git a/branches/0.6/doc/simplepkg.out b/branches/0.6/doc/simplepkg.out
deleted file mode 100644
index 4839e4e..0000000
--- a/branches/0.6/doc/simplepkg.out
+++ /dev/null
@@ -1,11 +0,0 @@
-\BOOKMARK [1][-]{section.1}{Descri\347\343o}{}
-\BOOKMARK [1][-]{section.2}{Arquitetura}{}
-\BOOKMARK [1][-]{section.3}{Instalando o simplepkg}{}
-\BOOKMARK [1][-]{section.4}{Configurando o simplepkg}{}
-\BOOKMARK [1][-]{section.5}{Criando jaulas e replicando instala\347\365es}{}
-\BOOKMARK [1][-]{section.6}{Metapacotes}{}
-\BOOKMARK [1][-]{section.7}{Upgrade de jaulas}{}
-\BOOKMARK [1][-]{section.8}{Arquiteturas e vers\365es diferentes}{}
-\BOOKMARK [1][-]{section.9}{Aplicativo auxiliar: rebuildpkg}{}
-\BOOKMARK [1][-]{section.10}{Fonte}{}
-\BOOKMARK [1][-]{section.11}{P\341gina de desenvolvimento}{}
diff --git a/branches/0.6/doc/simplepkg.pdf b/branches/0.6/doc/simplepkg.pdf
deleted file mode 100644
index 9895ebb..0000000
--- a/branches/0.6/doc/simplepkg.pdf
+++ /dev/null
Binary files differ
diff --git a/branches/0.6/doc/simplepkg.tex b/branches/0.6/doc/simplepkg.tex
deleted file mode 100644
index 7c98e54..0000000
--- a/branches/0.6/doc/simplepkg.tex
+++ /dev/null
@@ -1,241 +0,0 @@
-\documentclass{article}
-\usepackage[brazilian]{babel}
-\usepackage[latin1]{inputenc}
-\usepackage[dvips]{graphics}
-\usepackage{hyperref}
-\newcommand\link{\hyperlink}
-
-\title{Gerenciamento de instalações e metapacotes com o simplepkg}
-\author{Silvio Rhatto}
-
-\begin{document}\label{start}
-\maketitle
-
-\begin{abstract}
-O \emph{simplepkg} é um sistema de gerenciamento de pacotes que roda sobre o \emph{pkgtool}. Ele trabalha com templates -- listas com pacotes instalados, scripts e arquivos de configuração -- permitindo criar perfis de instalação que podem ser então usados para instalar o sistema numa outra partição, criar um chroot específico ou até trabalhar com o conceito de \emph{metapacotes}: uma lista de pacotes que pode ser instalada e removida com apenas um comando.
-\end{abstract}
-
-\section{Descrição}
-
-Todas as distribuições de GNU/Linux já tem algum sistema de empacotamento amadurecido. A questão agora é a praticidade de instalar e controlar o que está instalado, tanto pacotes como arquivos de configuração de uma máquina.
-
-Imagine por exemplo se você precisa manter uma lista de pacotes de 200 máquinas slackware, sendo que algumas são usadas como desktop, outras como servidores web, alguma sendo o servidor de email e assim por diante. Imagine agora que você perca o disco de algumas dessas máquinas ou que precise cotidianamente reinstalar ou atualizar um sistema.
-
-Usar o cd de instalação do slackware e configurar na mão toda a vez que der um pau faria com que você ficasse louco/a e desperdiçasse muito tempo, além do que sempre ocorre de esquecermos algum detalhe ou pacote durante a configuração do sistema. Manter um backup completo de cada máquina, por outro lado, pode ser muito custoso se o número delas for muito grande.
-
-O simplepkg permite que você mantenha um template para cada grupo de máquinas e com apenas um comando instalar o template numa partição. Além do template, você precisa do \emph{swaret} configurado para os repositórios de pacote que possuem seus aplicativos.
-
-Gerenciar instalações e metapacotes não é tudo o que o simplepkg faz. Ele pode ser usado até na criação de \emph{vservers}. O simplepkg inclusive é um amadurecimento de idéias delineadas nos seguintes artigos:
-
-\begin{itemize}
- \item \link{/node/3}{Rodando o OpenOffice.org em chroot no Slamd64}
- \item \link{/node/6}{Criando Vservers em Slackware}
- \item \link{/node/7}{Instalando o Slackware sem programa de instalação}
-\end{itemize}
-
-O \emph{simplepkg} permite que o trampo proposto nos artigos acima seja simplificado a uma meia dúzia de comandos, desde que existam templates prontos.
-
-\section{Arquitetura}
-
-O \emph{simplepkg} é um conjunto de scripts escritos com a filosofia KISS em mente. Ele é um sistema muito simples, composto pelos seguintes comandos:
-
-\begin{itemize}
- \item mkjail: constrói uma jaula/instalação de slackware numa pasta
- \item metapkg: instala ou remove um metapacote
- \item templatepkg: criar ou adiciona pacotes a um template
- \item lspkg: lista pacotes instalados
- \item jail-upgrade: faz o upgrade nas jaulas
- \item rebuildpkg: reconstrói um pacote a partir de sua entrada no \emph{/var/log/packages}
- \item simplaret: obtém pacotes de repositórios locais ou remotos
-\end{itemize}
-
-A pasta de configuração e armazenamento de templates é a \emph{/etc/simplepkg}. Templates são arquivos contendo uma lista de pacotes, um pacote por linha e com a extensão \emph{.template}. Como exemplo, um template poderia se chamar \emph{minimo.template} e conter a seguinte lista:
-
-\begin{verbatim}
-aaa_base
-aaa_elflibs
-apache
-bash
-bin
-coreutils
-findutils
-\end{verbatim}
-
-Se você quiser também é possível usar um \emph{tagfile} do slackware como template, sem nem precisar editá-lo.
-
-\section{Instalando o simplepkg}
-
-Para baixar o pacote do simplepkg, vá em http://slack.midiatatica.org/packages/noarch/. Depois de instalá-lo.
-
-\begin{verbatim}
-installpkg simplepkg-VERSAO-noarch-BUILD.tgz
-\end{verbatim}
-
-Alternativamente, se você usa o swaret, adicione em seu \emph{swaret.conf} a linha
-
-\begin{verbatim}
-REPOS_ROOT=SlackMidiataticaNoarch%http://slack.midiatatica.org/packages/noarch
-\end{verbatim}
-
-e então digite
-
-\begin{verbatim}
-swaret --update
-swaret --install simplepkg
-\end{verbatim}
-
-\section{Configurando o simplepkg}
-
-Como exemplo, vamos criar uma jaula baseada nos pacotes instalados no seu slackware. Edite o arquivo \emph{/etc/simplepkg/simplepkg.conf}:
-
-\begin{verbatim}
-# /etc/simplepkg/simplepkg.conf
-JAIL_ROOT="/vservers" # local onde as jaulas serão criadas
-SIMPLARET="simplaret" # programa que baixa os pacotes (pode ser o swaret se voce o tiver)
-STORAGE="/var/simplaret" # local onde o swaret armazena seus pacotes
-SIMPLARET_CLEAN="1" # apaga o cache de pacotes antes da instalação da jaula
-SIMPLARET_DELETE_DOWN="1" # apaga o cache de pacotes após a instalação
-SIMPLARET_UPDATE="0" # atualiza as listas de pacotes antes de iniciar a instalação da jaula
-SIMPLARET_PURGE_WEEKS="N" # apaga os pacotes mais velhos que N semanas antes de instalar
-PATCHES_DIR="/var/simplaret/patches" # local os patches são armazenados
-\end{verbatim}
-
-Para definir quais repositórios de pacotes você usará, edite o arquivo \emph{/etc/simplepkg/repos.conf}, colocando algo como
-
-\begin{verbatim}
-ROOT-i386="http://slack.midiatatica.org/packages/slackware"
-REPOS-i386="slack-midiatatica%http://slack.midiatatica.org/packages/slackware"
-ROOT-x86_64-10.2="http://darkstar.ist.utl.pt/pub/slamd64/"
-REPOS-x86_64-10.2="slamd-midiatatica%http://slack.midiatatica.org/packages/slamd64"
-\end{verbatim}
-
-Se você quer utilizar o swaret em lugar do simplaret, o swaret.conf deve estar bem configurado para que ele seja capaz de baixar e instalar todos os pacotes dos templates. Parâmetros como \emph{EXCLUDE} podem ser um empecilho, e se você os remover da sua instalação tenha muito cuidado ao atualizar o seu sistema via \emph{swaret --upgrade}. A desvantagem de usar o swaret é que você não terá como administrar jaulas e instalações de múltiplas arquiteturas.
-
-Para informações detalhadas sobre o simplaret, consulte seu \link{/node/16}{artigo específico}.
-
-\section{Criando jaulas e replicando instalações}
-
-\begin{verbatim}
-templatepkg meu-slackware
-mkjail jaula meu-slackware
-\end{verbatim}
-
-Isso cria o template \emph{meu-slackware} a partir da sua lista de pacotes em \emph{/var/log/packages} e cria uma nova árvore com esses pacotes na pasta \emph{/vservers/jaula} (dependendo de qual o valor da variável \emph{JAIL\_ROOT} do simplepkg.conf, é claro).
-
-Se você quiser que alguns arquivos de configuração e executar scripts após a instalação dessa jaula, basta colocarmos na pasta \emph{/etc/simplepkg/meu-slackware.d/} os arquivos de configuração (dentro da hierarquia de pastas do sistema, isto é, \emph{/etc/simplepkg/meu-slackware.d/etc/apache/httpd.conf}) e os script em \emph{/etc/simplepkg/meu-slackware.s}. O template \emph{vserver}, que já vem no mkjail, contém um exemplo de script.
-
-Você pode especificar também destinos alternativos para sua jaula, através de um comando do tipo
-
-\begin{verbatim}
-ROOT=/mnt mkjail hda2 meu-slackware
-\end{verbatim}
-
-O comando acima faz exatamente o que você está pensando: replica sua instalação slackware em \emph{/mnt/hda2}, dispensando totalmente o programa de instalação do slackware!
-
-Caso nenhum template for especificado, o \emph{mkjail} utiliza o template \emph{/etc/simplepkg/default.template}.
-
-Se você manter uma jaula em \emph{JAIL\_ROOT} com o mesmo nome que um template, é possível ainda usar o script \emph{jail-update} para copiar todas as alterações de arquivos da jaula na pasta de arquivos do seu template (\emph{/etc/simplepkg/nome-da-jaula.d}). Assim, basta que você copie todos os arquivos de configuração que você editou para essa pasta e deixar o \emph{jail-update} numa crontab para que você tenha sempre um template atualizado e baseado nas jaulas / instalações que você tem rodando e que estiverem listadas no arquivo \emph{/etc/simplepkg/jailist}:
-
-\begin{verbatim}
-jail-update
-\end{verbatim}
-
-O \emph{jail-update} considera que o template \emph{main}, caso exista, se refere à instalação principal da sua máquina, isto é, o sistema de você roda. Dessa forma a invocação do \emph{jail-update} atualiza todos os templates cujas jaulas estão em \emph{JAIL\_ROOT} e ainda atualiza o template da instalação principal.
-
-Para adicionar ou remover pacotes de um template, basta editar o arquivo de template. Uma outra forma de adicionar arquivos é usando o \emph{templatepkg} com a opção \emph{-a}, que adiciona apenas novos pacotes ao template. Se você quiser que o \emph{templatepkg} crie um template a partir de uma jaula, simplesmente use
-
-\begin{verbatim}
-templatepkg jaula /vservers/jaula
-\end{verbatim}
-
-\section{Metapacotes}
-
-Outro uso dos templates é a criação de pacotes: imagine por exemplo a dificuldade de um usuário/a novo de slackware para instalar o cinelerra e todas as suas dependências. Criando um template contendo o nome de todos os pacotes necessários para rodar esse software permite que um usuário instale-o simplesmente com o comando
-
-\begin{verbatim}
-metapkg --install cinelerra
-\end{verbatim}
-
-O comando sugere uma semelhança com o uso direto do \emph{swaret} ou do \emph{slapt-get}, com a única diferença residindo no modo como cada um desses programas lida com as dependências de um pacote. Os \emph{slapt-get} suporta o arquivo \emph{slack-required}, que pode ou não estar presente no pacote. Já o \emph{swaret} possui uma ferramenta própria para a criação de uma lista de dependências.
-
-O \emph{simplepkg} não pretende substituir esses dois modos de checagem e sim propor uma alternativa de distribuição de pacotes em que as dependências são resolvidas sem precisar de um repositório de dependências ou uma modificação no próprio pacote, que é o caso do \emph{slack-required}, um arquivo que na maioria das vezes não está presente.
-
-A remoção de um aplicativo e todas as suas dependências podem ser feitas simplesmente com o comando
-
-\begin{verbatim}
-metapkg --remove cinelerra
-\end{verbatim}
-
-\section{Upgrade de jaulas}
-
-O upgrade de jaulas que estejam em \emph{JAIL\_ROOT} pode ser efetuado com o comando \emph{jail-upgrade}. Simplesmente coloque os patches em \emph{PATCHES\_DIR} e dê o comando
-
-\begin{verbatim}
-jail-upgrade
-\end{verbatim}
-
-Se você quiser atualizar apenas uma das jaulas que estão em \emph{JAIL\_ROOT}, use
-
-\begin{verbatim}
-jail-upgrade nome-da-jaula
-\end{verbatim}
-
-Para especificar uma pasta contendo patches diferente de \emph{PATCHES\_DIR} (útil quando você possui jaulas com diferentes versões do slackware), simplesmente use
-
-\begin{verbatim}
-PATCHES=/local/dos/patches jail-upgrade nome-da-jaula
-\end{verbatim}
-
-De modo análogo ao \emph{mkjail}, é possível indicar ao \emph{jail-upgrade} uma outra pasta onde a jaula está armazenada:
-
-\begin{verbatim}
-ROOT=/otherroot jail-upgrade
-\end{verbatim}
-
-\section{Arquiteturas e versões diferentes}
-
-O \emph{simplepkg} foi idealizado para permitir que um mesmo template possa ser usado para criar jaulas de arquiteturas e versões diferentes de sistemas padrão slackware. A atualização desses sistemas também é unificada. Essa possibilidade só é permitida se você usa o simplaret e não o swaret como ferramenta de obtenção de pacotes.
-
-Por exemplo, para criar uma instalação de slackware 10.1 (assumindo que suas definições de repositórios do \emph{/etc/simplepkg/repos.conf} contenham locais com slack 10.1), basta usar o comando
-
-\begin{verbatim}
-VERSION=10.1 mkjail minha-jaula template-servidor
-\end{verbatim}
-
-Arquiteturas diferentes também podem ser usadas. Se você está num sistema \emph{x86\_64} e quer instalar um slack 10.2 numa partição, experimente
-
-\begin{verbatim}
-ARCH=i386 VERSION=10.2 ROOT=/mnt mkjail hda2 meu-slackware
-\end{verbatim}
-
-Note que os templates independem de arquitetura e versão, já que eles só contém nomes de pacotes,
-arquivos de configuração e scripts. Por isso, o \emph{templatepkg}, o \emph{metapkg}, o \emph{lspkg} e o \emph{jail-update} funcionam normalmente.
-
-Para atualizar suas jaulas, o \emph{jail-upgrade} checa antes qual a versão e arquitetura de cada uma
-de suas jaulas através do \emph{/etc/slackware-version} correspondente e a partir disso aplica os patches da arquitetura e versão da mesma, usando para isso o simplaret (veja a \link{node/16}{documentação própria}).
-
-Desse modo, mesmo que você tenha jaulas de versões e arquiteturas diversas, usar o comando \emph{jail-upgrade} faz a atualização sem problemas, desde que seus patches estejam organizados por arquitetura e versão, conforme é detalhado na \link{/node/16}{documentação do simplaret}.
-
-\section{Aplicativo auxiliar: rebuildpkg}
-
-O simplepkg acompanha ainda um aplicativo auxiliar que ajuda a recuperar pacotes instalados cujo \emph{.tgz} original foi perdido. O comando \emph{rebuildpkg} reconstrói um pacote a partir de uma entrada no \emph{/var/log/packages}. O comando
-
-\begin{verbatim}
-rebuildpkg coreutils
-\end{verbatim}
-
-reconstrói um pacote do coreutils usando os arquivos e as metainformações listadas no arquivo do \emph{/var/log/packages/} correspondente ao coreutils.
-
-\section{Fonte}
-
-Se você quiser obter diretamente o código-fonte do \emph{simplepkg}, baixe-o do repositório:
-
-\begin{verbatim}
-svn checkout svn://slack.midiatatica.org:40/simplepkg
-\end{verbatim}
-
-\section{Página de desenvolvimento}
-
-A página do \emph{simplepkg} fica em \link{http://slack.midiatatica.org/wiki/Main/SimplePKG}{http://slack.midiatatica.org/wiki/Main/SimplePKG}.
-
-\end{document}
diff --git a/branches/0.6/install/doinst.sh b/branches/0.6/install/doinst.sh
deleted file mode 100644
index a9d11ce..0000000
--- a/branches/0.6/install/doinst.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-( if [ ! -f "etc/simplepkg/simplepkg.conf" ]; then mv etc/simplepkg/simplepkg.conf.new etc/simplepkg/simplepkg.conf; fi )
-( if [ ! -f "etc/simplepkg/repos.conf" ]; then mv etc/simplepkg/repos.conf.new etc/simplepkg/repos.conf; fi )
-( if [ ! -f "etc/simplepkg/defaults/mkbuild/generic.mkSlackBuild" ]; then mv etc/simplepkg/defaults/mkbuild/generic.mkSlackBuild.new etc/simplepkg/defaults/mkbuild/generic.mkSlackBuild; fi )
diff --git a/branches/0.6/install/slack-desc b/branches/0.6/install/slack-desc
deleted file mode 100644
index 586d7b6..0000000
--- a/branches/0.6/install/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
- |-----handy-ruler-------------------------------------------------------|
-simplepkg: simplepkg (slackware management system)
-simplepkg:
-simplepkg: simplepkg is a very small set of scripts intended to help slackware
-simplepkg: users and developers, like the createpkg packagement tool, simplaret
-simplepkg: package retrieval, mkjail chroot installer and templatepkg template
-simplepkg: management system.
-simplepkg:
-simplepkg:
-simplepkg:
-simplepkg:
-simplepkg:
diff --git a/branches/0.6/lib/common.sh b/branches/0.6/lib/common.sh
deleted file mode 100644
index 67ab161..0000000
--- a/branches/0.6/lib/common.sh
+++ /dev/null
@@ -1,774 +0,0 @@
-#!/bin/bash
-#
-# common.sh: common functions for simplepkg
-# feedback: rhatto at riseup.net | gpl
-#
-# Uses some functions from pkgtools, which license is:
-#
-# Copyright 1999 Patrick Volkerding, Moorhead, Minnesota, USA
-# Copyright 2001, 2002, 2003 Slackware Linux, Inc., Concord, California, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-# notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-#
-
-BASE_CONF="/etc/simplepkg"
-CONF="$BASE_CONF/simplepkg.conf"
-JAIL_LIST="$BASE_CONF/jailist"
-SIMPLARET="simplaret"
-
-# -----------------------------------------------
-# pkgtool functions
-# -----------------------------------------------
-
-function package_name {
-
- STRING=`basename $1 .tgz`
- # Check for old style package name with one segment:
- if [ "`echo $STRING | cut -f 1 -d -`" = "`echo $STRING | cut -f 2 -d -`" ]; then
- echo $STRING
- else # has more than one dash delimited segment
- # Count number of segments:
- INDEX=1
- while [ ! "`echo $STRING | cut -f $INDEX -d -`" = "" ]; do
- INDEX=`expr $INDEX + 1`
- done
- INDEX=`expr $INDEX - 1` # don't include the null value
- # If we don't have four segments, return the old-style (or out of spec) package name:
- if [ "$INDEX" = "2" -o "$INDEX" = "3" ]; then
- echo $STRING
- else # we have four or more segments, so we'll consider this a new-style name:
- NAME=`expr $INDEX - 3`
- NAME="`echo $STRING | cut -f 1-$NAME -d -`"
- echo $NAME
- fi
- fi
-
-}
-
-# -----------------------------------------------
-# package info functions
-# -----------------------------------------------
-
-function package_version {
-
- # get VERSION from a package name
- local file pack version
- file="`basename $1`"
- pack="`package_name $1`"
- version="`echo $file | sed -e "s/^$pack-//" | cut -d "-" -f 1`"
- echo $version
-
-}
-
-function package_arch {
-
- # get ARCH from a package name
- local file pack arch
- file="`basename $1`"
- pack="`package_name $1`"
- arch="`echo $file | sed -e "s/^$pack-//" | cut -d "-" -f 2`"
- echo $arch
-
-}
-
-function package_build {
-
- # get BUILD from a package name
- local file pack build
- file="`basename $1 .tgz`"
- pack="`package_name $1`"
- build="`echo $file | sed -e "s/^$pack-//" | cut -d "-" -f 3`"
- echo $build
-
-}
-
-# -----------------------------------------------
-# package administrative functions
-# -----------------------------------------------
-
-function install_packages {
-
- local check installed unable_to_install root
-
- # check if is time to clean the local repository
- if [ "$SIMPLARET_CLEAN" == "1" ]; then
- ARCH=$ARCH VERSION=$VERSION $SIMPLARET --purge
- elif [ ! -z "$SIMPLARET_PURGE_WEEKS" ] && [ "$SIMPLARET_PURGE_WEEKS" != "0" ]; then
- ARCH=$ARCH VERSION=$VERSION $SIMPLARET --purge -w $SIMPLARET_PURGE_WEEKS
- fi
-
- root="$JAIL_ROOT/$server"
-
- # now tries to install each package listed in the template
- for pack in `cat $TEMPLATE | grep -v -e "^#" | cut -d : -f 1 | awk '{ print $1 }'`; do
-
- # try to install the package
- ROOT=/$root ARCH=$ARCH VERSION=$VERSION $SIMPLARET --install $pack --skip-checks
-
- # check if the package was installed
- pack="`echo $pack | sed -e 's/\+/\\\+/'`"
- installed=`eval "ls /$root/var/log/packages/ | egrep -E '^$pack-[^-]+-[^-]+-[^-]+$'"`
- check=$?
-
- if [ ! -z "$installed" ] && [ "$check" == "0" ]; then
- # the package is installed
- if [ ! -z "$SIMPLARET_DELETE_DURING" ] && [ "$SIMPLARET_DELETE_DURING" != "0" ]; then
- SILENT=1 ARCH=$ARCH VERSION=$VERSION $SIMPLARET --purge
- fi
- else
- unable_to_install="$unable_to_install\n\t$pack"
- fi
-
- done
-
- # purge packages, if needed
- if [ "$SIMPLARET_DELETE_DOWN" == "1" ]; then
- ARCH=$ARCH VERSION=$VERSION $SIMPLARET --purge
- fi
-
- if [ ! -z "$unable_to_install" ]; then
- echo "mkjail was unable to install the following packages on $root:"
- echo -e "$unable_to_install"
- fi
-
-}
-
-function remove_packages {
-
- for pack in `cat $TEMPLATE | grep -v -e "^#" | cut -d : -f 1`; do
- ROOT=/$JAIL_ROOT/$server removepkg $pack
- done
-
-}
-
-# -----------------------------------------------
-# config file functions
-# -----------------------------------------------
-
-function eval_parameter {
-
- # usage: eval $1 parameter from $CONF
- # return the evaluated parameter if available or $2 $3 ... $n
-
- if grep -qe "^$1=" $CONF; then
- grep -e "^$1=" $CONF | cut -d = -f 2 | sed -e 's/"//g' -e "s/'//g" | sed -e 's/ *#.*$//'
- else
- shift
- echo $*
- fi
-
-}
-
-function set_constants {
-
- # Set common constants
- # on/off
- on=1
- off=0
- # yes/no
- yes=1
- no=0
-
-}
-
-function eval_boolean_parameter {
-
- # get a boolean parameter from the configuration
-
- local value
-
- # get the value
- value="`eval_parameter $1 $2`"
-
- convert_boolean $value
-
-}
-
-function convert_boolean {
-
- # force case insensitiveness
- local value="`echo $1 | tr '[:upper:]' '[:lower:]'`"
-
- # convert it to wheter 0 or 1
- if [ "$value" == "yes" ] || [ "$value" == "1" ] || [ "$value" == "on" ]; then
- echo 1
- else
- echo 0
- fi
-
-}
-
-function eval_config {
-
- # simplepkg config file evaluation
- # usage: eval_config <program-name> [-u]
-
- if [ -f "$CONF" ]; then
-
- DEFAULT_ARCH="`eval_parameter DEFAULT_ARCH $(default_arch)`"
- DEFAULT_VERSION="`eval_parameter DEFAULT_VERSION $(default_version)`"
-
- STORAGE="`eval_parameter STORAGE /var/simplaret/packages`"
- JAIL_ROOT="`eval_parameter JAIL_ROOT /vservers`"
- PATCHES_DIR="`eval_parameter PATCHES_DIR /var/simplaret/patches`"
- ROOT_PRIORITY="`eval_parameter ROOT_PRIORITY patches slackware extra testing pasture`"
- REPOS_PRIORITY="`eval_parameter REPOS_PRIORITY patches slackware extra testing pasture`"
- SIMPLARET_PURGE_WEEKS="`eval_parameter SIMPLARET_PURGE_WEEKS 0`"
- FTP_TOOL="`eval_parameter FTP_TOOL curl`"
- HTTP_TOOL="`eval_parameter HTTP_TOOL curl`"
- CONNECT_TIMEOUT="`eval_parameter CONNECT_TIMEOUT 0`"
- TEMPLATE_FOLDER="`eval_parameter TEMPLATE_BASE /etc/simplepkg/templates`"
- TEMPLATE_STORAGE_STYLE="`eval_parameter TEMPLATE_STORAGE_STYLE own-folder`"
-
- SIMPLARET_CLEAN="`eval_boolean_parameter SIMPLARET_CLEAN 1`"
- SIMPLARET_DELETE_DOWN="`eval_boolean_parameter SIMPLARET_DELETE_DOWN 1`"
- SIMPLARET_UPDATE="`eval_boolean_parameter SIMPLARET_UPDATE 0`"
- SIMPLARET_DELETE_DURING="`eval_boolean_parameter SIMPLARET_DELETE_DURING 0`"
- SIMPLARET_PURGE_PATCHES="`eval_boolean_parameter SIMPLARET_PURGE_PATCHES 0`"
- SIMPLARET_DOWNLOAD_FROM_NEXT_REPO="`eval_boolean_parameter SIMPLARET_DOWNLOAD_FROM_NEXT_REPO 1`"
- PASSIVE_FTP="`eval_boolean_parameter PASSIVE_FTP 0`"
- WARNING="`eval_boolean_parameter WARNING 0`"
- SIGNATURE_CHECKING="`eval_boolean_parameter SIGNATURE_CHECKING 0`"
- DEPENDENCY_CHECKING="`eval_boolean_parameter DEPENDENCY_CHECKING 1`"
- TEMPLATES_UNDER_SVN="`eval_boolean_parameter TEMPLATES_UNDER_SVN 0`"
- ADD_TO_JAIL_LIST="`eval_boolean_parameter ADD_TO_JAIL_LIST 1`"
-
- # Enabling this option (i.e, setting to "1" or "yes"), simplaret will
- # donwload even # already applied patches, a good option when you plan
- # to keep local copies of all needed patches for your system
- DOWNLOAD_EVEN_APPLIED_PATCHES="`eval_boolean_parameter DOWNLOAD_EVEN_APPLIED_PATCHES 0`"
-
- # Enabling this option, jail-upgrade will look at your
- # standard repositories for new packages; if it find a package
- # with different version of your current installed package and
- # also this package isnt in the packages folder, then the new
- # package is apllied; if in doubt, just say no or leave blank.
- CONSIDER_ALL_PACKAGES_AS_PATCHES="`eval_boolean_parameter CONSIDER_ALL_PACKAGES_AS_PATCHES 0`"
-
- # Enabling this option (i.e, setting to "1" or "yes"), simplaret will
- # store patches it finds on ROOT repositories on
- #
- # $PATCHES_DIR/$ARCH/$VERSION/root-$repository_name.
- #
- # By default this option is turned off because it breaks the standard
- # way to store packages and can cause some confusion, but its an useful
- # feature if you like to see all patches apart from common packages and/or
- # stored in the same tree.
- STORE_ROOT_PATCHES_ON_PATCHES_DIR="`eval_boolean_parameter STORE_ROOT_PATCHES_ON_PATCHES_DIR 0`"
-
- # now we place "patches" on the top of ROOT_PRIORITY
- ROOT_PRIORITY="patches `echo $ROOT_PRIORITY | sed -e 's/patches//'`"
-
-
- else
- echo $1 error: config file $CONFIG not found
- exit 1
- fi
-
- if [ ! -d "$STORAGE" ]; then
- mkdir -p $STORAGE
- fi
-
- if [ ! -d "$PATCHES_DIR" ]; then
- mkdir -p $PATCHES_DIR
- fi
-
- if [ -z "$ARCH" ]; then
- ARCH="$DEFAULT_ARCH"
- fi
-
- if [ -z "$VERSION" ]; then
- VERSION="$DEFAULT_VERSION"
- fi
-
- if [ "$FTP_TOOL" != "wget" ] && [ "$FTP_TOOL" != "curl" ] && [ "$FTP_TOOL" != "ncftpget" ]; then
- echo "$1 configuration error: invalid value $FTP_TOOL for config parameter FTP_TOOL"
- echo "$1 assuming value \"curl\" for variable FTP_TOOL"
- FTP_TOOL="curl"
- fi
-
- if [ "$HTTP_TOOL" != "wget" ] && [ "$HTTP_TOOL" != "curl" ]; then
- echo "$1 configuration error: invalid value $HTTP_TOOL for config parameter HTTP_TOOL"
- echo "$1 assuming value \"curl\" for variable HTTP_TOOL"
- HTTP_TOOL="curl"
- fi
-
- if which $SIMPLARET &> /dev/null; then
- if [ "$SIMPLARET_UPDATE" == "1" ]; then
- if [ "$2" == "-u" ]; then
- ARCH=$ARCH VERSION=$VERSION $SIMPLARET --update
- fi
- fi
- else
- echo "$SIMPLARET not found, please install it before run $0"
- fi
-
- if [ "$TEMPLATE_STORAGE_STYLE" != "simplepkg-folder" ] && \
- [ "$TEMPLATE_STORAGE_STYLE" != "templates-folder" ] && \
- [ "$TEMPLATE_STORAGE_STYLE" != "own-folder" ]; then
- TEMPLATE_STORAGE_STYLE="own-folder"
- fi
-
- if [ ! -z "$ROOT" ]; then
- JAIL_ROOT="$ROOT"
- fi
-
-}
-
-# -----------------------------------------------
-# arch and version functions
-# -----------------------------------------------
-
-function default_version {
-
- # get version from /etc/slackware-version
- if [ -f "$1/etc/slackware-version" ]; then
- cat $1/etc/slackware-version | awk '{ print $2 }' | sed -e 's/.0$//'
- else
- echo "none"
- fi
-
-}
-
-function default_arch {
-
- # get arch from /etc/slackware-version
-
- local arch
- arch="`cat $1/etc/slackware-version | awk '{ print $3 }' | sed -e 's/(//' -e 's/)//'`"
-
- if [ -z "$arch" ]; then
- echo i386
- else
- echo $arch
- fi
-
-}
-
-# -----------------------------------------------
-# template functions
-# -----------------------------------------------
-
-function search_default_template {
-
- if [ -e "$BASE_CONF/default.template" ]; then
- TEMPLATE_BASE="$BASE_CONF/default"
- echo $BASENAME using default template
- elif [ -e "$TEMPLATE_FOLDER/default.template" ]; then
- TEMPLATE_BASE="$TEMPLATE_FOLDER/default"
- echo $BASENAME: using default template
- elif [ -e "$TEMPLATE_FOLDER/default/default.template" ]; then
- TEMPLATE_BASE="$TEMPLATE_FOLDER/default/default"
- echo $BASENAME: using default template
- elif [ -e "$BASE_CONF/defaults/templates/default/default.template" ]; then
- TEMPLATE_BASE="$BASE_CONF/defaults/templates/default"
- echo $BASENAME using default template
- else
- echo $BASENAME: error: default template not found
- echo $BASENAME: please create a template using templatepkg
- return 1
- fi
-
-}
-
-function search_template {
-
- # determine the template to be used
- # usage: search-template <template-name> [--new | --update]
-
- #
- # templates can be stored either on
- #
- # - $BASE_CONF/template_name.template
- # - $TEMPLATE_FOLDER/template_name.template
- # - $TEMPLATE_FOLDER/template_name/template_name.template
- #
- # also, there's a folder for "oficial" simplepkg templates,
- # $BASE_CONF/defaults/templates/ and you can override any template
- # in the default folder by placing a template with the same name
- # in the template storage folders
- #
-
- if [ -f "$BASE_CONF/$1.template" ]; then
- TEMPLATE_BASE="$BASE_CONF/$1"
- elif [ -f "$TEMPLATE_FOLDER/$1.template" ]; then
- TEMPLATE_BASE="$TEMPLATE_FOLDER/$1"
- elif [ -f "$TEMPLATE_FOLDER/$1/$1.template" ]; then
- TEMPLATE_BASE="$TEMPLATE_FOLDER/$1/$1"
- elif [ -f "$BASE_CONF/defaults/templates/$1/$1.template" ] && \
- [ "$2" != "--update" ]; then
- TEMPLATE_BASE="$BASE_CONF/defaults/templates/$1/$1"
- else
- if [ "$2" == "--new" ]; then
- # we need to return the path for a new template
- if [ "$TEMPLATE_STORAGE_STYLE" == "simplepkg-folder" ]; then
- TEMPLATE_BASE="$BASE_CONF/$1"
- elif [ "$TEMPLATE_STORAGE_STYLE" == "templates-folder" ]; then
- TEMPLATE_BASE="$TEMPLATE_FOLDER/$1"
- else
- TEMPLATE_BASE="$TEMPLATE_FOLDER/$1/$1"
- fi
- elif [ "$2" == "--update" ]; then
- return 1
- else
- echo $BASENAME: template $1 not found
- search_default_template
- fi
- fi
-
-}
-
-# -----------------------------------------------
-# unix permission functions
-# -----------------------------------------------
-
-function numeric_perm {
-
- # get the numeric permission of a file
- # usage: numeric_perm <file-name>
-
- # just a bit of forbidden secrets
-
- if [ -a "$1" ]; then
- ls -lnd $1 | awk '{ print $1 }' | \
- sed -e 's/^.//' -e 's/r/4/g' -e 's/w/2/g' -e 's/x/1/g' \
- -e 's/-/0/g' -e 's/\(.\)\(.\)\(.\)/\1+\2+\3/g' | \
- fold -w5 | bc -l | xargs | sed -e 's/ //g'
- fi
-
-}
-
-function get_owner {
-
- # get the numeric owner for a file
- # usage: get_owner <file>
-
- if [ -a "$1" ]; then
- ls -lnd $1 | awk '{ print $3 }'
- fi
-
-}
-
-function get_group {
-
- # get the numeric group for a file
- # usage: get_group <file>
-
- if [ -a "$1" ]; then
- ls -lnd $1 | awk '{ print $4 }'
- fi
-
-}
-
-# -----------------------------------------------
-# subversion functions
-# -----------------------------------------------
-
-function use_svn {
-
- # check if svn usage is enabled
-
- if [ "$TEMPLATES_UNDER_SVN" == "1" ] && \
- [ "$TEMPLATE_STORAGE_STYLE" == "own-folder" ]; then
- return 0
- else
- return 1
- fi
-
-}
-
-function svn_check {
-
- # check if a file is under svn
- # usage: svn_check <file>
-
- local cwd folder
-
- cwd="`pwd`"
- folder="`dirname $1`"
-
- if [ -d "$folder/.svn" ]; then
-
- cd $folder
-
- if [ "`svn status $1 | awk '{ print $1 }'`" == "?" ]; then
- return 1
- else
- return 0
- fi
-
- cd $cwd
-
- else
-
- return 1
-
- fi
-
-}
-
-# -----------------------------------------------
-# update jail functions
-# -----------------------------------------------
-
-function update_template_files {
-
- # update template files from svn
- # usage: update_template_files
-
- if use_svn && [ -d "$TEMPLATE_BASE.d/.svn" ]; then
- echo Checking out last template revision from svn...
- cd `dirname $TEMPLATE_BASE`
- svn update
- fi
-
-}
-
-function copy_template_files {
-
- # copy template files into jail
- # usage: copy_template_files <jail-path>
-
- if [ -d "$1" ]; then
- if [ -d "$TEMPLATE_BASE.d" ]; then
- echo "Copying template files to $1..."
- if use_svn && [ -d "$TEMPLATE_BASE.d/.svn" ]; then
- rsync -av --exclude=.svn $TEMPLATE_BASE.d/ $1/
- else
- rsync -av $TEMPLATE_BASE.d/ $1/
- fi
- fi
- fi
-
-}
-
-function set_jail_perms {
-
- # set template file permissions under a jail
- # usage: set_jail_perms <jail-path>
-
- if [ -s "$TEMPLATE_BASE.perms" ]; then
- echo Setting jail $1 permissions...
- cat $TEMPLATE_BASE.perms | while read entry; do
- file="`echo $entry | cut -d ";" -f 1`"
- if [ -e "$TEMPLATE_BASE.d/$file" ] && [ -a "$1/$file" ]; then
- owner="`echo $entry | cut -d ";" -f 2`"
- group="`echo $entry | cut -d ";" -f 3`"
- perms="`echo $entry | cut -d ";" -f 4`"
- chmod $perms $1/$file
- chown $owner:$group $1/$file
- fi
- done
- fi
-
-}
-
-# -----------------------------------------------
-# repository build functions
-# -----------------------------------------------
-
-function svn_add_meta {
-
- find *meta -exec svn add {} 2> /dev/null \;
- find . -name *meta -exec svn add {} 2> /dev/null \;
-
-}
-
-function gen_filelist {
- # generate FILELIST.TXT
- # usage: gen_filelist
-
- find . -type f -name *.tgz -follow -print | sort | tr '\n' '\0' | \
- xargs -0r ls -ldL --time-style=long-iso > FILELIST.TXT
- echo "Created new FILELIST.TXT"
-
-}
-
-function gen_patches_filelist {
-
- # generate FILE_LIST
- # usage: gen_patches_filelist <folder>
-
- if [ ! -z "$1" ] && [ -d "$1" ]; then
-
- cwd="`pwd`"
- cd $1
- for file in `find | grep -e ".tgz$"`; do ls -l $file; done > FILE_LIST
- cd $pwd
-
- if [ "$1" == "." ]; then
- echo "Created new FILE_LIST"
- else
- echo "Created new $1/FILE_LIST"
- fi
-
- fi
-
-}
-
-function gen_packages_txt {
-
- # generate PACKAGES.TXT
- # usage: gen_packages_txt <folder>
-
- if [ ! -z "$1" ] && [ -d "$1" ]; then
-
- cwd="`pwd`"
- cd $1
-
- echo '' > PACKAGES.TXT
- find . -type f -name '*.meta' -exec cat {} \; >> PACKAGES.TXT
- cat PACKAGES.TXT | gzip -9 -c - > PACKAGES.TXT.gz
- cd $pwd
-
- if [ "$1" == "." ]; then
- echo "Created new PACKAGES.TXT and PACKAGES.TXT.gz"
- else
- echo "Created new $1/PACKAGES.TXT and $1/PACKAGES.TXT.gz"
- fi
-
- fi
-
-}
-
-function gen_md5_checksums {
-
- # generate CHECKSUMS.md5
- # usage: gen_md5_checksums <folder>
-
- if [ ! -z "$1" ] && [ -d "$1" ]; then
-
- cwd="`pwd`"
- cd $1
-
- echo '' > CHECKSUMS.md5
- find . -type f -name '*.tgz' -exec md5sum {} \; >> CHECKSUMS.md5
- cat CHECKSUMS.md5 | gzip -9 -c - > CHECKSUMS.md5.gz
- cd $pwd
-
- if [ "$1" == "." ]; then
- echo "Created new CHECKSUMS.md5 and CHECKSUMS.md5.gz"
- else
- echo "Created new $1/CHECKSUMS.md5 and $1/CHECKSUMS.md5.gz"
- fi
-
- fi
-
-}
-
-function gen_meta {
-
- # generate metafiles
- # usage: gen_meta <package-file>
-
- if [ ! -f $1 ]; then
- echo "File not found: $1"
- exit 1;
- else
- echo "Processing $1"
- fi
-
- if [ "`echo $1|grep -E '(.*{1,})\-(.*[\.\-].*[\.\-].*).tgz[ ]{0,}$'`" == "" ]; then
- return;
- fi
-
- NAME=$(echo $1|sed -re "s/(.*\/)(.*.tgz)$/\2/")
- LOCATION=$(echo $1|sed -re "s/(.*)\/(.*.tgz)$/\1/")
- SIZE=$( expr `gunzip -l $1 | tail -n 1|awk '{print $1}'` / 1024 )
- USIZE=$( expr `gunzip -l $1 | tail -n 1|awk '{print $2}'` / 1024 )
- REQUIRED=$(tar xzfO $1 install/slack-required 2>/dev/null|xargs -r -iZ echo -n "Z,"|sed -e "s/,$//")
- CONFLICTS=$(tar xzfO $1 install/slack-conflicts 2>/dev/null|xargs -r -iZ echo -n "Z,"|sed -e "s/,$//")
- SUGGESTS=$(tar xzfO $1 install/slack-suggests 2>/dev/null|xargs -r )
- METAFILE=${NAME%tgz}meta
-
- echo "PACKAGE NAME: $NAME" > $LOCATION/$METAFILE
-
- if [ -n "$DL_URL" ]; then
- echo "PACKAGE MIRROR: $DL_URL" >> $LOCATION/$METAFILE
- fi
-
- echo "PACKAGE LOCATION: $LOCATION" >> $LOCATION/$METAFILE
- echo "PACKAGE SIZE (compressed): $SIZE K" >> $LOCATION/$METAFILE
- echo "PACKAGE SIZE (uncompressed): $USIZE K" >> $LOCATION/$METAFILE
- echo "PACKAGE REQUIRED: $REQUIRED" >> $LOCATION/$METAFILE
- echo "PACKAGE CONFLICTS: $CONFLICTS" >> $LOCATION/$METAFILE
- echo "PACKAGE SUGGESTS: $SUGGESTS" >> $LOCATION/$METAFILE
- echo "PACKAGE DESCRIPTION:" >> $LOCATION/$METAFILE
-
- tar xzfO $1 install/slack-desc | grep -E '\w+\:'|grep -v '^#' >> $LOCATION/$METAFILE
-
- echo "" >> $LOCATION/$METAFILE
-
-}
-
-# -----------------------------------------------
-# misc functions
-# -----------------------------------------------
-
-function slash {
-
- # remove additional slashes
- echo $* | sed -e 's/\/\+/\//g'
-
-}
-
-function color_select {
-
- # Select color mode: gray, color or none (*)
- # commun - Communication
- # messag - Commum messages
- # error - Error messages
- # normal - turn off color
- case "$1" in
- 'gray')
- commun="\033[37;1m"
- messag="\033[37;1m"
- error="\033[30;1m"
- alert="\033[37m"
- normal="\033[m"
- ;;
- 'color')
- commun="\033[34;1m" # green
- messag="\033[32;1m" # blue
- error="\033[31;1m" # red
- alert="\033[33;1m" # yellow
- normal="\033[m" # normal
- ;;
- *)
- commun=""
- messag=""
- error=""
- alert=""
- normal=""
- ;;
- esac
-
-}
-
-
-function eecho {
-
- # echoes a message
- # usage: eecho <message-type> <message>
- # message-type can be: commun, messag, error, normal
-
- echo -e "${1}${2}${normal}"
-
-}
-
diff --git a/branches/0.6/mkbuild/generic.mkSlackBuild.new b/branches/0.6/mkbuild/generic.mkSlackBuild.new
deleted file mode 100644
index 7c8620c..0000000
--- a/branches/0.6/mkbuild/generic.mkSlackBuild.new
+++ /dev/null
@@ -1,270 +0,0 @@
-###################################################
-## Generic template for SlackBuilds
-##
-## Version 0.8.1 - Luis ( luis at riseup d0t net)
-##
-###################################################
-<head> all
-#!/bin/bash
-#
-# [[PROGRAM NAME]].SlackBuild is free software; you can redistribute
-# it and/or modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of the License,
-# or any later version.
-#
-# [[PROGRAM NAME]].SlackBuild is distributed in the hope that it will
-# be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
-# Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-# slackbuild for [[PROGRAM NAME]], by [[SLACKBUILD AUTHOR]]
-# requires: [[REQUIRES]]
-# tested: [[PROGRAM NAME]]-[[VERSION]]
-#
-</head>
-
-<slackbuildrc> off
-# Look for slackbuildrc
-if [ -f ~/.slackbuildrc ]; then
- source ~/.slackbuildrc
-elif [ -f /etc/slackbuildrc ]; then
- source /etc/slackbuildrc
-fi
-</slackbuildrc>
-
-<set_variables> all
-# Set variables
-CWD="$(pwd)"
-SRC_NAME="[[SOURCE NAME]]"
-PKG_NAME="[[PACKAGE NAME]]"
-ARCH=${ARCH:=[[ARCH]]}
-SRC_VERSION=${VERSION:=[[VERSION]]}
-PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
-BUILD=${BUILD:=1[[SLACKBUILD AUTHOR INITIALS]]}
-SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
-TMP=${TMP:=/tmp}
-PKG=${PKG:=$TMP/package-$PKG_NAME}
-REPOS=${REPOS:=$TMP}
-PREFIX=${PREFIX:=[[PREFIX]]}
-PKG_SRC="$TMP/$SRC_NAME-$SRC_VERSION"
-CONF_OPTIONS=${CONF_OPTIONS:="[[OTHER CONFIGURE ARGS]]"}
-NUMJOBS=${NUMJOBS:="[[NUMBER OF JOBS]]"}
-</set_variables>
-
-<slkflags> all
-# Set system libraries' path and optmization flags based on $ARCH
-LIBDIR="$PREFIX/lib"
-
-if [ "$ARCH" = "i386" ]; then
- SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
-elif [ "$ARCH" = "i486" ]; then
- SLKCFLAGS="-O2 -march=i486 -mcpu=i686"
-elif [ "$ARCH" = "i686" ]; then
- SLKCFLAGS="-O2 -march=i686"
-elif [ "$ARCH" = "s390" ]; then
- SLKCFLAGS="-O2"
-elif [ "$ARCH" = "x86_64" ]; then
- SLKCFLAGS="-O2"
- LIBDIR="$PREFIX/lib64"
-fi
-</slkflags>
-
-<error_codes> off
-# Set error codes (used by createpkg)
-ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33
-ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36
-ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39
-ERROR_PATCH=40; ERROR_VCS=41; ERROR_MKDIR=42
-</error_codes>
-
-<start_structure> all
-# Clean up any leftovers of previous builds
-rm -rf "$PKG_SRC" 2> /dev/null
-rm -rf "$PKG" 2> /dev/null
-
-# Create directories if necessary
-mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR
-mkdir -p "$PKG" || exit $ERROR_MKDIR
-mkdir -p "$REPOS" || exit $ERROR_MKDIR
-</start_structure>
-
-<download_source> off
-# Dowload source if necessary
-SRC="[[SOURCE NAME CONSTRUCTION STRING]]"
-URL="[[DOWNLOAD FOLDER URL]]/$SRC"
-
-if [ ! -s "$SRC_DIR/$SRC" ] || ! [[DECOMPRESSOR]] [[DECOMPRESSOR TEST FLAG]] "$SRC_DIR/$SRC" 2> /dev/null; then
- wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
-fi
-</download_source>
-
-<md5sum_download_and_check_0> off
-MD5SUM_SRC="$(md5sum "$SRC_DIR/$SRC" | cut -d " " -f 1)"
-MD5SUM_URL="[[MD5SUM CODE]]"
-
-[ "$MD5SUM_SRC" == "$MD5SUM_URL" ] || exit $ERROR_MD5
-</md5sum_download_and_check_0>
-
-<md5sum_download_and_check_1> off
-# Download source's MD5 checksum if necessary and check it
-if [ ! -s "$SRC_DIR/$SRC.[[MD5SUM EXTENSION]]" ]; then
- wget "$URL.[[MD5SUM EXTENSION]]" -O "$SRC_DIR/$SRC.[[MD5SUM EXTENSION]]" || exit $ERROR_WGET
-fi
-
-MD5SUM_SRC="$(md5sum "$SRC_DIR/$SRC" | cut -d " " -f 1)"
-MD5SUM_URL="$(grep "$SRC[ \t]*$" "$SRC_DIR/$SRC.[[MD5SUM EXTENSION]]" | cut -d " " -f 1)"
-
-[ "$MD5SUM_SRC" == "$MD5SUM_URL" ] || exit $ERROR_MD5
-</md5sum_download_and_check_1>
-
-<gpg_signature_check> off
-# Import minimized signing key from
-# [[SIGNING KEY URL]]
-gpg --import << EOKEY || exit $ERROR_GPG
-[[SIGNING KEY]]
-EOKEY
-
-# Dowload source's signature if necessary and check it
-if [ ! -s "$SRC_DIR/$SRC.sig" ]; then
- wget "$URL.sig" -O "$SRC_DIR/$SRC.sig" || exit $ERROR_WGET
-fi
-
-gpg --verify "$SRC_DIR/$SRC.sig" "$SRC_DIR/$SRC" || exit $ERROR_GPG
-</gpg_signature_check>
-
-<untar_source> all
-# Untar
-cd "$TMP"
-tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
-cd "$PKG_SRC"
-</untar_source>
-
-<path_source> off
-# Patch source
-patches="[[PATCH FILES]]
- $PKG_NAME.diff $PKG_NAME-$PKG_VERSION.diff
- $PKG_NAME-$PKG_VERSION-$ARCH.diff $PKG_NAME-$ARCH.diff"
-for patch in $patches; do
- if [ -f "$CWD/$patch" ]; then
- patch -Np[[NUMBER OF PREFIX SLASHES TO STRIP]] < "$CWD/$patch" || exit $ERROR_PATCH
- elif [ -f "$CWD/patches/$patch" ]; then
- patch -Np[[NUMBER OF PREFIX SLASHES TO STRIP]] < "$CWD/patches/$patch" || exit $ERROR_PATCH
- fi
-done
-</path_source>
-
-<configure> off
-# Configure
-CFLAGS="$SLKCFLAGS" \
- CXXFLAGS="$SLKCFLAGS" \
- ./configure \
- --prefix="$PREFIX" --libdir="$LIBDIR" $CONF_OPTIONS || exit $ERROR_CONF
-</configure>
-
-<make_package> all
-# Compile
-make $NUMJOBS || exit $ERROR_MAKE
-</make_package>
-
-<install_package> all
-# Install
-make install DESTDIR="$PKG" || exit $ERROR_INSTALL
-</install_package>
-
-<strip_binaries> off
-# Strip binaries
-( cd "$PKG"
- find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
- xargs strip --strip-unneeded 2> /dev/null
- find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
- xargs strip --strip-unneeded 2> /dev/null
-)
-</strip_binaries>
-
-<compress_manpages> off
-# Compress and link manpages
-if [ -d "$PKG/$PREFIX/man" ]; then
- ( cd "$PKG/$PREFIX/man"
- for manpagedir in $(find . -type d -name "man*") ; do
- ( cd $manpagedir
- for eachpage in $( find . -type l -maxdepth 1) ; do
- ln -s $( readlink $eachpage ).gz $eachpage.gz
- rm $eachpage
- done
- gzip -9 *.?
- )
- done
- )
-fi
-</compress_manpages>
-
-<compress_info_files> off
-# Compress info files
-if [ -d "$PKG/$PREFIX/info" ]; then
- ( cd "$PKG/$PREFIX/info"
- rm -f dir
- gzip -9 *
- )
-fi
-</compress_info_files>
-
-<install_documentation> off
-# Install documentation
-DOCS="[[DOCUMENTATION FILES]]"
-mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
-cp -a $DOCS "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
-</install_documentation>
-
-<slackdesc> off
-# Add package description (slack-desc)
-mkdir -p "$PKG/install" || exit $ERROR_MKDIR
-cat << EODESC > "$PKG/install/slack-desc"
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description. Line
-# up the first '|' above the ':' following the base package name, and the '|'
-# on the right side marks the last column you can put a character in. You must
-# make exactly 11 lines for the formatting to be correct. It's also
-# customary to leave one space after the ':'.
-
- |-----handy-ruler------------------------------------------------------|
-[[SLACK-DESC]]
-EODESC
-</slackdesc>
-
-<postinstall_script> off
-# Add a post-installation script (doinst.sh)
-cat << EOSCRIPT > "$PKG/install/doinst.sh"
-config() {
- NEW="\$1"
- OLD="\$(dirname \$NEW)/\$(basename \$NEW .new)"
- # If there's no config file by that name, mv it over:
- if [ ! -r \$OLD ]; then
- mv \$NEW \$OLD
- elif [ "\$(cat \$OLD | md5sum)" = "\$(cat \$NEW | md5sum)" ]; then
- # toss the redundant copy
- rm \$NEW
- fi
- # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-config path/to/config_file.new
-[[REST OF DOINST.SH]]
-EOSCRIPT
-</postinstall_script>
-
-<build_package> all
-# Build the package
-cd "$PKG"
-makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
-</build_package>
-
-<clean_builds> off
-# Delete source and build directories if requested
-if [ "$CLEANUP" == "yes" ]; then
- rm -rf "$PKG_SRC" "$PKG"
-fi
-</clean_builds>
diff --git a/branches/0.6/mkbuild/sample-Pyrex-large.mkbuild b/branches/0.6/mkbuild/sample-Pyrex-large.mkbuild
deleted file mode 100644
index e052eb3..0000000
--- a/branches/0.6/mkbuild/sample-Pyrex-large.mkbuild
+++ /dev/null
@@ -1,156 +0,0 @@
-#--------------------
-# Personal variables
-#--------------------
-# Author name
-[[SLACKBUILD AUTHOR]]="Rudson R. Alves"
-
-# Initials author name
-[[SLACKBUILD AUTHOR INITIALS]]="rra"
-
-#------------------------
-# Construction Variables
-#------------------------
-#
-# Source base name. if different from package name. Null ("") to default value.
-# Auto-set, get SRC_NAME from URL: http://.../$SRC_NAME-$VERSION.tar.$EXTENSION'
-[[SOURCE NAME]]="Pyrex"
-
-# Package name. Null ("") to auto-set
-# Auto-set, get PKG_NAME from URL downcase(SRC_NAME): http://.../$SRC_NAME-$VERSION.tar.$EXTENSION'
-[[PACKAGE NAME]]=""
-
-#
-# Source Name construction string
-# Default value is: $SRC_NAME-$VERSION.tar.$EXTENSION
-#[[SOURCE NAME CONSTRUCTION STRING]]="SOURCE NAME CONSTRUCTION STRING"
-[[SOURCE NAME CONSTRUCTION STRING]]="$SRC_NAME-$VERSION.tar.$EXTENSION"
-
-#
-# Complete URL address or URL base address ( without $SRC_NAME-$VERSION... )
-#[[DOWNLOAD FOLDER URL]]="http://www.cosc.canterbury.ac.nz/greg.ewing/python/Pyrex/Pyrex-0.9.5.1a.tar.gz"
-[[DOWNLOAD FOLDER URL]]="http://www.cosc.canterbury.ac.nz/greg.ewing/python/Pyrex/"
-
-#
-# Package version. Null ("") to auto-set.
-# Auto-set, get VERSION from URL: http://.../$SRC_NAME-$VERSION.tar.$EXTENSION'
-[[VERSION]]="0.9.5.1a"
-
-#
-# Package extension. Null ("") to auto-set
-# Auto-set, get EXTENSION from URL: http://.../$SRC_NAME-$VERSION.tar.$EXTENSION'
-[[EXTENSION]]="gz"
-
-#
-# Dependency list input
-# Enter string: "dependency_1 [condiction_1] [versio_1]: dependency_2 [condiction_2] [versio_2]"
-# Example:
-[[SLACK REQUIRED]]="dep1 >= 1.1.1: dep2 >= 2.2.2:dep3:dep4:dep5 = 1.0"
-#[[SLACK_REQUIRED]]=""
-
-#
-# Decompress program
-# gz, tgz, bz2, set null ("") to auto-set
-# Auto-set, get DECOMPRESSOR from URL EXTENSION: http://.../$SRC_NAME-$VERSION.tar.$EXTENSION'
-[[DECOMPRESSOR]]=""
-
-#
-# Decompress check flag
-# gz, tgz, bz2, set null ("") to auto-set
-[[DECOMPRESSOR TEST FLAG]]=""
-
-#
-# Documentation files. Null ("") to auto-set commom doc-files:
-# NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*
-[[DOCUMENTATION FILES]]=""
-
-#
-# ./configure options
-[[OTHER CONFIGURE ARGS]]=""
-
-#
-# PREFIX. Default /usr
-[[PREFIX]]="/usr"
-
-#
-# Number of jobs
-[[NUMBER OF JOBS]]="-j7"
-
-#---------------------
-# Others changes
-#---------------------
-#[[PATCH FILES]]=""
-[[MD5SUM CODE]]="5a1bb7c76162a987a1d5040ea2d1f670"
-#[[MD5SUM EXTENSION]]=""
-#[[SIGNING KEY]]=""
-#[[SIGNING KEY URL]]=""
-#[[PATCH FILES]]=""
-
-# SlackBuild model
-[[SLACKBUILD MODEL]]="generic.mkSlackBuild"
-
-# SlackBuild PATH in Slack.Sarava tree
-[[SLACKBUILD PATH]]="dev/python/pyrex"
-
-#---------------------
-# SlackBuild Sections
-#---------------------
-# Default enable sections:
-# head, set_variables, slkflags, start_structure, untar_source,
-# make_package, install_package, build_package
-# Warning: don't remove '#>>' and "#<<" tags.
-#>> Start SlackBuild Sections:
-#all: head
- on: slackbuildrc
-#all: set_variables
- on: slkflags
- on: error_codes
-#all: start_structure
- on: download_source
- on: md5sum_download_and_check_0
-#off: md5sum_download_and_check_1
-#off: gpg_signature_check
-#all: untar_source
-#off: path_source
- on: configure
-#all: make_package
-#all: install_package
- on: strip_binaries
-#off: compress_manpages
-#off: compress_info_files
- on: install_documentation
- on: slackdesc
-#off: postinstall_script
-#all: build_package
- on: clean_builds
-#<< End SlackBuild Sections
-
-#------------------
-# Sections changes
-#------------------
-#>slackdesc
-pyrex: Pyrex by Slack.Sarava
-pyrex:
-pyrex: Pyrex is a language specially designed for writing Python extension
-pyrex: modules. Its designed to bridge the gap between the nice, high-level,
-pyrex: easy-to-use world of Python and the messy, low-level world of C.
-pyrex:
-pyrex:
-pyrex:
-pyrex:
-pyrex:
-pyrex:
-#<slackdesc
-
-#------------ test section: untar_source -----------------
-#>untar_source
-# Untar program
-
-# Change to temp dir
-cd "$TMP"
-
-# Uncompress e untar source
-gunzip "$SRC_DIR/$SRC" | tar --no-same-owner --no-same-permissions -xvf || exit $ERROR_TAR
-
-# Change to source dir
-cd "$PKG_SRC"
-#<untar_source
diff --git a/branches/0.6/mkbuild/sample-Pyrex-small.mkbuild b/branches/0.6/mkbuild/sample-Pyrex-small.mkbuild
deleted file mode 100644
index 953f67b..0000000
--- a/branches/0.6/mkbuild/sample-Pyrex-small.mkbuild
+++ /dev/null
@@ -1,43 +0,0 @@
-#--------------------
-# Personal variables
-#--------------------
-# Author name
-[[SLACKBUILD AUTHOR]]="Adalberto Simão Nader"
-
-#
-# Complete URL address or URL base address ( without $SRC_NAME-$VERSION... )
-[[DOWNLOAD FOLDER URL]]="http://www.cosc.canterbury.ac.nz/greg.ewing/python/Pyrex/Pyrex-0.9.5.1a.tar.gz"
-
-#
-# Default enable sections:
-# head, set_variables, slkflags, start_structure, untar_source,
-# make_package, install_package, build_package
-# Warning: don't remove '#>>' and "#<<" tags.
-#>> Start SlackBuild Sections:
- on: slackbuildrc
- on: slkflags
- on: error_codes
- on: download_source
- on: configure
- on: strip_binaries
- on: install_documentation
- on: slackdesc
- on: clean_builds
-#<< End SlackBuild Sections
-
-#------------------
-# Sections changes
-#------------------
-#>slackdesc
-pyrex: Pyrex by Slack.Sarava
-pyrex:
-pyrex: Pyrex is a language specially designed for writing Python extension
-pyrex: modules. Its designed to bridge the gap between the nice, high-level,
-pyrex: easy-to-use world of Python and the messy, low-level world of C.
-pyrex:
-pyrex:
-pyrex:
-pyrex:
-pyrex:
-pyrex:
-#<slackdesc
diff --git a/branches/0.6/simplepkg.SlackBuild b/branches/0.6/simplepkg.SlackBuild
deleted file mode 100755
index 9f5feec..0000000
--- a/branches/0.6/simplepkg.SlackBuild
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/bash
-#
-# SlackBuild script for simplepkg
-#
-
-PACKAGE="simplepkg"
-PACK_DIR="package-$PACKAGE"
-BUILD=${BUILD:=1rha}
-VERSION="0.6"
-ARCH="noarch"
-LIBEXEC="/usr/libexec/$PACKAGE"
-BINDIR="/usr/bin"
-BINARY_LIST="simplaret repos lspkg mkbuild"
-SBINDIR="/usr/sbin"
-SBINARY_LIST="mkjail templatepkg jail-update jail-commit metapkg rebuildpkg createpkg exec-slackbuild"
-LIB_LIST="common.sh"
-DOC_DIR="/usr/doc"
-DOC_LIST="COPYING TODO CHANGELOG README README.pt_BR README.simplaret README.simplaret.pt_BR"
-
-rm -rf $PACK_DIR
-mkdir -p $PACK_DIR/install
-cp install/slack-desc $PACK_DIR/install
-cp install/doinst.sh $PACK_DIR/install
-
-mkdir -p $PACK_DIR/$SBINDIR
-for binary in $SBINARY_LIST; do
- if [ -f "src/$binary" ]; then
- cp src/$binary $PACK_DIR/$SBINDIR
- chmod +x $PACK_DIR/$SBINDIR/$binary
- fi
-done
-
-mkdir -p $PACK_DIR/$BINDIR
-for binary in $BINARY_LIST; do
- cp src/$binary $PACK_DIR/$BINDIR/
- chmod +x $PACK_DIR/$BINDIR/$binary
-done
-
-mkdir -p $PACK_DIR/$LIBEXEC
-for lib in $LIB_LIST; do
- cp lib/$lib $PACK_DIR/$LIBEXEC/
-done
-
-rm -rf $PACK_DIR/$DOC_DIR
-mkdir -p $PACK_DIR/$DOC_DIR/$PACKAGE-$VERSION
-for file in $DOC_LIST; do
- cp doc/$file $PACK_DIR/$DOC_DIR/$PACKAGE-$VERSION/
-done
-
-mkdir -p $PACK_DIR/etc/$PACKAGE/{defaults/mkbuild,templates}
-rsync -av --exclude=.svn templates/* $PACK_DIR/etc/$PACKAGE/defaults/templates/
-chmod +x $PACK_DIR/etc/$PACKAGE/defaults/templates/vserver/vserver.s/*.sh
-chmod +x $PACK_DIR/etc/$PACKAGE/defaults/templates/vserver-legacy/vserver-legacy.s/*.sh
-cp conf/simplepkg.conf.new $PACK_DIR/etc/$PACKAGE/
-cp conf/repos.conf.new $PACK_DIR/etc/$PACKAGE/
-cp mkbuild/generic.mkSlackBuild.new $PACK_DIR/etc/$PACKAGE/defaults/mkbuild/
-
-if [ -f "$PACK_DIR/usr/sbin/jail-upgrade" ]; then
- cd $PACK_DIR/usr/sbin && ln -s jail-upgrade vserver-upgrade
- cd -
-fi
-
-cd $PACK_DIR
-chown -R root.root *
-
-makepkg -c y -l y ../simplepkg-$VERSION-$ARCH-$BUILD.tgz
-cd ..
-
-if [ "$CLEANUP" != "no" ]; then
- rm -rf $PACK_DIR
-fi
-
diff --git a/branches/0.6/src/createpkg b/branches/0.6/src/createpkg
deleted file mode 100644
index 373c8cc..0000000
--- a/branches/0.6/src/createpkg
+++ /dev/null
@@ -1,515 +0,0 @@
-#!/bin/bash
-#
-# createpkg: package builder using http://slack.sarava.org/slackbuilds scripts
-# feedback: rhatto at riseup.net | gpl
-#
-# createpkg is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# createpkg is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-# /etc/simplepkg/slackbuildrc parameters:
-#
-# SLACKBUILDS_DIR="/folder/to/place/slackbuilds", defaults to /var/slackbuilds
-# SVN="svn://repository", defaults do svn://slack.sarava.org/slackbuilds
-# SYNC="yes|no", whether to always update the repository
-#
-# TODO
-#
-# - optionally show a dependency tree before create the package
-# - in function solve_dep: resolve program versions
-# - mkdir source directory - error... (please check!)
-
-#---------------------------------------------------
-# Createpkg functions
-#---------------------------------------------------
-
-CREATEPKG_VERSION="1.1.1"
-
-function error_codes {
-
- # Slackbuilds error codes
- ERROR_WGET=31 # wget error
- ERROR_MAKE=32 # make source error
- ERROR_INSTALL=33 # make install error
- ERROR_MD5=34 # md5sum error
- ERROR_CONF=35 # ./configure error
- ERROR_HELP=36 # dasable
- ERROR_TAR=37 # tar error
- ERROR_MKPKG=38 # makepkg error
- ERROR_GPG=39 # gpg check error
- ERROR_PATCH=40 # patch error
- ERROR_VCS=41 # cvs error
- ERROR_MKDIR=42 # make directory error
-
- # Createpkg error codes
- ERROR_INSTPKG=200 # installpkg error
- ERROR_DEPEN=201 # dependency error
- SCRIPT_OR_PACKAGE_NOT_FOUND=202 # Script or package not found
-}
-
-function handle_error {
-
- # This function deals with internal createpkg errors
- # and also with non-zero exit codes from slackbuilds
- # Input: $1 - error code
- # Output: Error mensage
- #
- # check slackbuild exit status are:
- #
- # ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33
- # ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36
- # ERROR_TAR=37; ERROR_MKPKG=38 ERROR_GPG=39
- # ERROR_PATCH=40; ERROR_VCS=41; ERROR_MKDIR=42
- #
- # thanks to rudsonalves at yahoo.com.br for this spec.
-
- # we don't want to process when exit status = 0
- [ "$1" == "0" ] && return
-
- # Exit codes
- case $1 in
- 2) usage ;;
- 3) eecho $alert "$BASENAME: could not update the repository $2" ;;
- 4) eecho $alert "$BASENAME: could not create folder $2" ;;
- 5) eecho $alert "$BASENAME: script not found for $2" ;;
- $ERROR_WGET)
- eecho $error "$BASENAME: error downloading source/package for $2" ;;
- $ERROR_MAKE)
- eecho $error "$BASENAME: error compiling $2 source code" ;;
- $ERROR_INSTALL)
- eecho $error "$BASENAME: error installing $2" ;;
- $ERROR_MD5)
- eecho $error "$BASENAME: error on source code integrity check for $2" ;;
- $ERROR_CONF)
- eecho $error "$BASENAME: error configuring the source code for $2" ;;
- $ERROR_HELP)
- exit 0 ;; # its supposed to never happen here :P
- $ERROR_TAR)
- eecho $error "$BASENAME: error decompressing source code for $2" ;;
- $ERROR_MKPKG)
- eecho $error "$BASENAME: error creating package $2" ;;
- $ERROR_GPG)
- eecho $error "$BASENAME: error verifying GPG signature the source code for $2" ;;
- $ERROR_PATCH)
- eecho $error "$BASENAME: error patching the source code for $2" ;;
- $ERROR_VCS)
- eecho $error "$BASENAME: error downloading $2 source from version control system" ;;
- $ERROR_MKDIR)
- eecho $error "$BASENAME: make directory $2 error, aborting" ;;
- $ERROR_INSTPKG)
- eecho $error "$BASENAME: install package $2 error, aborting" ;;
- $ERROR_DEPEN)
- eecho $error "$BASENAME: dependency solve error, aborting" ;;
- *) eecho $error "$BASENAME: unknown error or user interrupt" ;;
- $SCRIPT_OR_PACKAGE_NOT_FOUND)
- eecho $error "$BASENAME: SlackBuild or package not found" ;;
- esac
-
- exit $1
-
-}
-
-function build_repo {
-
- # Checkout a new slackbuild working copy
- BASEDIR="`dirname $SLACKBUILDS_DIR`"
- mkdir -p $BASEDIR || handle_error 4 $BASEDIR
- cd $BASEDIR
- svn checkout $SVN
- cd $SLACKBUILDS_DIR
-
-}
-
-function usage {
-
- # Help message
- eecho $commun "Createpkg version $CREATEPKG_VERSION\n"
- eecho $commun "Usage: createpkg [--install/-i] package-name"
- eecho $commun " createpkg --no-deps/-np package-name"
- eecho $commun " createpkg --search/-s package-name"
- eecho $commun " createpkg --info/-f package-name"
- eecho $commun " createpkg --list/-l"
- eecho $commun " createpkg --sync"
- eecho $commun " createpkg --help/-h"
-}
-
-function check_config {
-
- # check the configuration
- TMP=${TMP:=/tmp};
- REPOS=${REPOS:=$MAKEPKG_REPOS};
- # Create $TMP and $REPOS if need
- [ ! -e $TPM ] && mkdir $TMP
- [ ! -e $REPOS ] && mkdir $REPOS
- #
- SLACKBUILDS_DIR=${SLACKBUILDS_DIR:=/var/slackbuilds}
- SVN=${SVN:=svn://slack.sarava.org/slackbuilds}
- SYNC=${SYNC:=$no}
- SYNC=`convert_boolean $SYNC`
- BASEDIR="`dirname $SLACKBUILDS_DIR`"
-
-}
-
-function solve_dep {
-
- # Solve dependency
- local PACK="$1"
- local COND="$2"
- local VER="$3"
-
- # Check package in local system
- PACK="`echo $PACK | sed -e 's/\+/\\\+/'`"
- INSTALLED=`eval "ls /var/log/packages/ | egrep -E '^$PACK-[^-]+-[^-]+-[^-]+$'"`
- CHECK=$?
-
- # TODO: Make check version procedures
- if [ -z "$INSTALLED" ]; then
- if [ $CHECK -ne 0 ]; then
- # Check package in SlackBuilds tree
- eecho $messag "$BASENAME: processing $PACKAGE dependency $PACK"
- SYNC=$no CREATEPKG_CHILD=$CREATEPKG_CHILD createpkg --install $PACK
-
- # check if the package was built and installed
- EXIT_CODE="$?"
-
- if [ "$EXIT_CODE" == "5" ]; then
-
- # exit code 5 == slackbuild not found
- # try to use simplaret
- ARCH=$CREATE_ARCH simplaret --update
- ARCH=$CREATE_ARCH simplaret --install $PACK
- EXIT_CODE="$?"
- if [ "$EXIT_CODE" != "0" ]; then
- handle_error $SCRIPT_OR_PACKAGE_NOT_FOUND $PACK
- fi
-
- elif [ "$EXIT_CODE" != "0" ]; then
- handle_error $EXIT_CODE $PACK
- fi
-
- fi
- fi
-
-}
-
-function check_repo {
-
- # Verify if repository exist
- [ ! -d "$SLACKBUILDS_DIR" ] && build_repo
-
-}
-
-function sync_repo {
-
- # Synchronize repository
- cd $SLACKBUILDS_DIR
- exit # svn update || build_repo
- #simplaret --update
-
-}
-
-function find_slackbuild {
-
- # Find SlackBuild script in the repository
- find $SLACKBUILDS_DIR -iname $1.SlackBuild
-
-}
-
-function info_builds {
-
- # Show packages info
- if [ "$PKG_PATH" != "" ]; then
- for i in $PKG_PATH; do
- PACKAGE=`basename $i .SlackBuild`
- NAME_UP=`echo $PACKAGE | tr [a-z] [A-Z]`
- eecho $commun "$NAME_UP: "
-
- PKG_DIR=`dirname $i`
- if [ -e $PKG_DIR/slack-desc ]; then
- eval "cat $PKG_DIR/slack-desc | grep '^$PACKAGE:' | cut -f2- -d:"
- eecho $normal
- else
- eval "cat $i | grep '^$PACKAGE:' | cut -f2- -d:"
- eecho $normal
- fi
-
- if [ -e $PKG_DIR/slack-required ]; then
- eecho $commun "slack-required"
- cat $PKG_DIR/slack-required | sed 's/^/ /'
- fi
- done
- fi
-
-}
-
-function list_builds {
-
- # List all available SlackBuilds
- cd $SLACKBUILDS_DIR
- echo "Sarava SlackBuilds list"
- # level 1
- for i in *; do
- if [ -d $i ]; then
- echo -e " $i: "
- (
- cd $i
- # level 2
- for j in *; do
- if [ -d $j ]; then
- eecho $commun " $j"
- (
- cd $j
- BUILD="`ls *.SlackBuild 2>/dev/null`"
- if [ "$BUILD" != "" ]; then
- # level 3
- for k in $BUILD; do
- eecho $messag " $k"
- done
- else
- BUILD=""
- fi
- for k in *; do
- if [ -d $k ]; then
- eecho $messag " $k.SlackBuild"
- fi
- done
- )
- fi
- done
- )
- fi
- done
-
-}
-
-function load_parameters {
-
- # Load Createpkg parameters
- MAKEPKG_REPOS="`eval_parameter MAKEPKG_REPOS /var/simplaret/repos`"
- SOURCE_DIR="`eval_parameter SOURCE_DIR /var/simplaret/sources`"
- SLACKBUILDS_DIR="`eval_parameter SLACKBUILDS_DIR /var/simplaret/slackbuilds`"
-
- COLOR_MODE="`eval_parameter COLOR_MODE none`"
- CREATE_ARCH="`eval_parameter CREATE_ARCH $(default_arch)`"
- CREATE_CLEANUP="`eval_boolean_parameter CREATE_CLEANUP $yes`"
-
- REMOVE_OLD_PACKAGE="`eval_boolean_parameter REMOVE_OLD_PACKAGE $off`"
- MOVE_BIN_PACKAGE="`eval_boolean_parameter MOVE_BIN_PACKAGE $off`"
-}
-
-#---------------------------------------------------
-# Starting createpkg
-#---------------------------------------------------
-# Common functions
-COMMON="/usr/libexec/simplepkg/common.sh"
-SIMPLEPKG_CONF="/etc/simplepkg/simplepkg.conf"
-BASENAME="`basename $0`"
-
-if [ -f "$COMMON" ]; then
- source $COMMON
-else
- echo "error: file $COMMON found, check your $BASENAME installation"
- mk_exit 0
-fi
-
-set_constants
-
-# Load simplepkg.conf variables
-load_parameters
-#eval_config $BASENAME
-
-# Loading error codes
-error_codes
-
-# Load slackbuildrc definitions
-if [ -f ~/.slackbuildrc ]; then
- source ~/.slackbuildrc
-else
- source /etc/slackbuildrc 2>/dev/null
-fi
-
-# Select color mode: gray, color or none (*)
-color_select $COLOR_MODE
-
-# This is used to show how many children process we have
-if [ -z "$CREATEPKG_CHILD" ]; then
- CREATEPKG_CHILD=1
-else
- let CREATEPKG_CHILD++
-fi
-
-BASENAME="`basename $0`[$CREATEPKG_CHILD]"
-
-check_config
-check_repo
-
-INSTALL=$off
-NO_DEPS=$off
-
-case $1 in
- '--search'|'-s')
- [ $# -ne 2 ] && handle_error 2 # two parameters is required
- find_slackbuild $2
- exit
- ;;
- '--info'|'-f')
- [ $# -ne 2 ] && handle_error 2 # two parameters is required
- PKG_PATH=`find_slackbuild $2`
- info_builds
- exit
- ;;
- '--install'|'-i')
- [ $# -ne 2 ] && handle_error 2 # two parameters is required
- PACKAGE="$2"
- INSTALL=$on
- ;;
- '--no-deps'|'-nd')
- [ $# -ne 2 ] && handle_error 2 # two parameters is required
- NO_DEPS=$on
- PACKAGE="$2"
- ;;
- '--sync')
- sync_repo
- exit 0
- ;;
- '--help'|'-h'|'')
- usage
- exit 0
- ;;
- '--list'|'-l')
- list_builds
- exit 0
- ;;
- *)
- if [ "${1:0:1}" != "-" ]; then
- PACKAGE="$1"
- else
- handle_error 2
- fi
- ;;
-esac
-
-# Synchronize repository
-[ $SYNC -eq $yes ] && sync_repo
-
-# Get SlackBuild script
-BUILD_SCRIPT="`find_slackbuild $PACKAGE`"
-
-# Check SlackBuild script found
-if [ -z "$BUILD_SCRIPT" ]; then
- handle_error 5 $PACKAGE
-fi
-
-# Select one SlackBuild
-if [ "`echo $BUILD_SCRIPT | wc -w`" -gt 1 ]; then
- AUX="$PS3"
- PS3="Choice: "
- LIST=`echo $BUILD_SCRIPT | sed 's/ /\n/g' | sed -r 's/.*\/(.*)\.SlackBuild$/\1/'`" EXIT"
-
- select PACKAGE in `echo $LIST`; do
- break
- done
-
- if [ "$PACKAGE" = "EXIT" ]; then
- eecho $error "error: None package select"
- exit 1
- fi
-
- # Select only one SlackBuild in BUILD_SCRIPT
- BUILD_SCRIPT=`echo $BUILD_SCRIPT | sed 's/ /\n/g' | grep "/$PACKAGE.SlackBuild"`
- PS3="$AUX"
-else
- #PACKAGE=`echo $BUILD_SCRIPT | sed -r 's/.*\/(.*)\.SlackBuild$/\1/'`
- PACKAGE=`basename $BUILD_SCRIPT .SlackBuild`
-fi
-
-# Get dirname and script name from slackbuild
-SCRIPT_BASE="`dirname $BUILD_SCRIPT`"
-SCRIPT_NAME="`basename $BUILD_SCRIPT`"
-eecho $messag "$BASENAME: found script $PACKAGE.SlackBuild, now checking for dependencies"
-
-# Sets the package's slack-required
-if [ -f "$SCRIPT_BASE/$PACKAGE.slack-required" ]; then
- SLACK_REQUIRED="$SCRIPT_BASE/$PACKAGE.slack-required"
-elif [ -f "$SCRIPT_BASE/slack-required" ]; then
- SLACK_REQUIRED="$SCRIPT_BASE/slack-required"
-fi
-
-if [ ! -z "$SLACK_REQUIRED" -a $NO_DEPS -ne $on ]; then
- # this routine checks for dependencies in package's slack-required
- ( grep '^[^#]' $SLACK_REQUIRED | while read dep; do
- if [ ! -z "$dep" ]; then
- PROGRAM="`echo $dep | awk '{ print $1 }'`"
- CONDITION="`echo $dep | awk '{ print $2 }' | tr [=\>\<] [egl]`"
- VERSION="`echo $dep | awk '{ print $3 }' | tr -dc '[:digit:]'`"
- solve_dep $PROGRAM $CONDITION $VERSION
- fi
- true
- done )
- if [ $? -ne 0 ]; then
- eecho $messag "$BASENAME: dependency solve error"
- exit 1
- fi
- eecho $messag "$BASENAME: done checking for $PACKAGE dependencies"
-else
- eecho $messag "$BASENAME: no unmet dependencies for $PACKAGE"
-fi
-
-eecho $messag "$BASENAME: processing $SCRIPT_NAME"
-
-# Change to script base directory
-cd $SCRIPT_BASE
-
-# Make MAKEPKG_REPOS
-[ ! -e $MAKEPKG_REPOS ] && mkdir -p $MAKEPKG_REPOS
-
-# Run SlackBuild script
-(
- SRC_DIR=${SRC_DIR:=$SOURCE_DIR} \
- SRC=${SRC_DIR:=$SOURCE_DIR} \
- ARCH=${ARCH:=$CREATE_ARCH} \
- COLOR=${COLOR:=$COLOR_MODE} \
- REPOS=${REPOS:=$MAKEPKG_REPOS} \
- CLEANUP=${CLEANUP:=$CREATE_CLEANUP} \
- INTERACT=no sh ./$SCRIPT_NAME
-)
-
-# Check if package was built
-handle_error $? $PACKAGE
-
-# Get package name
-PKG_NAME="`ls -1 -c $MAKEPKG_REPOS/$PACKAGE-*-*-*.tgz | head -n 1 | xargs basename`"
-
-# Select repository directory
-[ $MOVE_BIN_PACKAGE -eq $on ] && NEW_REPOS=$MAKEPKG_REPOS/$( echo ${SCRIPT_BASE#$SLACKBUILDS_DIR/} ) || NEW_REPOS=$MAKEPKG_REPOS
-
-# Create repository directory
-[ ! -e $NEW_REPOS ] && mkdir -p $NEW_REPOS 2>/dev/null
-
-# Remove old packages from repository tree
-[ $REMOVE_OLD_PACKAGE -eq $on ] && rm $NEW_REPOS/$PACKAGE-*-*-*.tgz 2>/dev/null
-
-# Move package to SlackBuilds-like tree
-[ $MOVE_BIN_PACKAGE -eq $on ] && mv $MAKEPKG_REPOS/$PKG_NAME $NEW_REPOS/
-
-# Install package
-if [ "$INSTALL" -eq $on ]; then
- # as we dont have the full package file name, we'll
- # use the newer file name that matches our wildcard:
-
- upgradepkg --install-new $NEW_REPOS/$PKG_NAME
-fi
-
-# Update repository FILELIST.TXT, ...
-(
- cd $MAKEPKG_REPOS
- gen_filelist
-)
diff --git a/branches/0.6/src/jail-commit b/branches/0.6/src/jail-commit
deleted file mode 100755
index f2695d7..0000000
--- a/branches/0.6/src/jail-commit
+++ /dev/null
@@ -1,170 +0,0 @@
-#!/bin/bash
-#
-# jail-commit: update config files from a jail to a template
-# feedback: rhatto@riseup.net | gpl
-#
-# Jail-commit is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# Jail-commit is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-
-COMMON="/usr/libexec/simplepkg/common.sh"
-BASENAME="`basename $0`"
-
-if [ -f "$COMMON" ]; then
- source $COMMON
- eval_config $BASENAME
-else
- echo "error: file $COMMON found, check your $BASENAME installation"
- exit 1
-fi
-
-function usage {
-
- echo $BASENAME: commit a jail configuration into a template
- echo "usage: \"$BASENAME [<jail-path> [template]]\""
- echo " \"$BASENAME --all\" to commit all templates"
- echo " \"$BASENAME --help\" for help"
-
-}
-
-function template_merge {
-
- # copy differences between the jail
- # and the template in the template folder
-
- # usage: template_merge <jail-path>
-
- if [ -z "$1" ] || [ ! -d "$TEMPLATE_BASE.d" ]; then
- return 1
- fi
-
- echo "" > $TEMPLATE_BASE.perms.tmp
- cd $TEMPLATE_BASE.d
-
- for file in `find | grep -v -e "/.svn$" | grep -v -e "/.svn/" | grep -v -e "^\.$"`; do
-
- if [[ -e "$file" && -e "$1/$file" ]]; then
-
- if [ ! -d "$file" ] && [ ! -h "$file" ]; then
- if ! diff $file $1/$file; then
- echo Updating $file
- cp -af $1/$file $file
- fi
- elif [ -h "$file" ]; then
- if [ "`readlink $file`" != "`readlink $1/$file`" ]; then
- rm -f $file
- ln -s `readlink $1/$file` $file
- fi
- fi
-
- perms="`numeric_perm $1/$file`"
- owner="`get_owner $1/$file`"
- group="`get_group $1/$file`"
- echo "$file;$owner;$group;$perms" >> $TEMPLATE_BASE.perms.tmp
-
- else
- if [ ! -e "$1/$file" ]; then
- echo $BASENAME: warning: missing file `slash $1/$file`
- fi
- fi
-
- done
-
- cat $TEMPLATE_BASE.perms.tmp | sed '/^$/d' > $TEMPLATE_BASE.perms
- rm -f $TEMPLATE_BASE.perms.tmp
-
- if ! svn_check $TEMPLATE_BASE,perms; then
- svn add $TEMPLATE_BASE,perms
- fi
-
-}
-
-function template_svn_commit {
-
- # issue a svn_commit from a template folder
- # usage: template_svn_commit <template-folder>
-
- if use_svn && [ -d "$1/.svn" ]; then
- cd $1
- echo First checking out from the repository...
- svn update
- echo Commiting changes to the repository...
- svn commit -m "changes for `date`"
- if [ "$?" != "0" ]; then
- echo $BASENAME: commit error
- fi
- fi
-
-}
-
-function do_commit {
-
- # commit jail changes to a repository
- # usage: do_commit <jailpath> [template]
-
- local jailpath template
-
- jailpath="$1"
- jail="`basename $jailpath`"
-
- if [ ! -z "$2" ]; then
- template="$2"
- else
- template="$jail"
- fi
-
- search_template $template --update
- if [ "$?" == "0" ] && ! echo "$TEMPLATE_UPDATE_LIST" | grep -q " `basename $TEMPLATE_BASE` "; then
- TEMPLATE_UPDATE_LIST=" $TEMPLATE_UPDATE_LIST `basename $TEMPLATE_BASE` " # the spaces are important
- if [ "$jailpath" == "/" ]; then
- echo Updating main installation...
- else
- echo Updating $jailpath...
- fi
- if [ -d "$TEMPLATE_BASE.d" ] || [ -a "$TEMPLATE_BASE.template" ]; then
- SILENT=yes templatepkg -u $template $jailpath
- template_merge $jailpath
- fi
- else
- if [ -z "$SILENT" ]; then
- echo $BASENAME: template $template not found
- fi
- return 1
- fi
-
-}
-
-TEMPLATE_UPDATE_LIST=""
-
-if [ "$1" == "--help" ]; then
- usage
-elif [ "$1" == "--all" ]; then
- template_svn_commit $BASE_CONF/templates
-elif echo $1 | grep -q -e "^--"; then
- usage
-elif [ ! -z "$1" ]; then
- do_commit $1 $2
- if [ "$?" == "0" ]; then
- template_svn_commit `dirname $TEMPLATE_BASE`
- fi
-else
- SILENT="yes"
- if [ -e $JAIL_LIST ]; then
- for jailpath in `cat $JAIL_LIST`; do
- do_commit $jailpath
- done
- fi
- # main jail
- do_commit / main
- template_svn_commit $BASE_CONF/templates
-fi
-
diff --git a/branches/0.6/src/jail-update b/branches/0.6/src/jail-update
deleted file mode 100755
index c5a008f..0000000
--- a/branches/0.6/src/jail-update
+++ /dev/null
@@ -1,61 +0,0 @@
-#!/bin/bash
-#
-# jail-update: update config files from a jail to a template
-# feedback: rhatto@riseup.net | gpl
-#
-# Jail-update is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# Jail-update is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-
-COMMON="/usr/libexec/simplepkg/common.sh"
-BASENAME="`basename $0`"
-
-if [ -f "$COMMON" ]; then
- source $COMMON
- eval_config $BASENAME
-else
- echo "error: file $COMMON found, check your $BASENAME installation"
- exit 1
-fi
-
-function usage {
-
- echo "$BASENAME: update a jail configuration from a template"
- echo "usage: $BASENAME <jail-path> [template]"
-
-}
-
-if [ -z "$1" ] || [ "$1" == "--help" ] || echo $1 | grep -q -e "^--"; then
- usage
- exit 1
-fi
-
-if [ -z "$2" ]; then
- template_name="`basename $1`"
-else
- template_name="$2"
-fi
-
-search_template $template_name --update
-
-if [ "$?" != "0" ]; then
- echo $BASENAME: template $template_name not found
- exit 1
-elif [ ! -d "$1" ]; then
- echo $BASENAME: jail $1 not found
- exit 1
-fi
-
-update_template_files
-copy_template_files $1
-set_jail_perms $1
-
diff --git a/branches/0.6/src/lspkg b/branches/0.6/src/lspkg
deleted file mode 100755
index 01900f2..0000000
--- a/branches/0.6/src/lspkg
+++ /dev/null
@@ -1,132 +0,0 @@
-#!/bin/bash
-#
-# lspkg v0.3: view installed and contents of slackware packages
-#
-# feedback: rhatto at riseup.net | gpl
-#
-# Lspkg is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# Lspkg is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-
-COMMON="/usr/libexec/simplepkg/common.sh"
-
-if [ -f "$COMMON" ]; then
- source $COMMON
-else
- echo "error: file $COMMON not found, check your `basename $0` installation"
- exit 1
-fi
-
-function head_line {
- echo "usage: [ROOT=/otherroot] `basename $0` [option expression]"
-}
-
-function usage {
- head_line
- echo "
-options are:
-
- -v, --view: view installed package contents
- -p, --print: print the contents of a package file
- -r, --remove: remove matching packages
- -s, --search: search a file under installed packages
- -d, --description: show matching packages' descriptions
-"
-}
-
-# -----------------------------------------------------
-# lspkg
-# -----------------------------------------------------
-
-if [ $# -eq 2 ]; then
- LIST_PKGS="`ls /$ROOT/var/log/packages/$2-[0-9]* 2> /dev/null`"
- if [ -z "$LIST_PKGS" ]; then
- LIST_PKGS="`ls /$ROOT/var/log/packages/$2* 2> /dev/null`"
- fi
-elif [ $# -eq 1 ]; then
- LIST_PKGS="`ls /$ROOT/var/log/packages/$1-[0-9]* 2> /dev/null`"
- if [ -z "$LIST_PKGS" ]; then
- LIST_PKGS="`ls /$ROOT/var/log/packages/$1* 2> /dev/null`"
- fi
-else
- LIST_PKGS="`ls /$ROOT/var/log/packages/ 2> /dev/null`"
-fi
-
-LIST_PKGS="`slash $LIST_PKGS`"
-
-case $1 in
- "-h"|"--help")
- usage
- ;;
- "-v"|"--view")
- if [ ! -z "$2" ]; then
- if [ ! -z "$LIST_PKGS" ]; then
- for file in $LIST_PKGS; do
- less $file
- done
- else
- if [ ! -z "$ROOT" ]; then
- echo "$2: package not found on /$ROOT/var/log/packages"
- else
- echo "$2: package not found on /var/log/packages"
- fi
- fi
- else
- head_line
- exit 1
- fi
- ;;
- "-p"|"--print")
- if [ -f "$2" ]; then
- tar ztvf $2
- else
- echo $2: file not found
- fi
- ;;
- "-r"|"--remove")
- if [ ! -z "$2" ]; then
- if [ ! -z "$LIST_PKGS" ]; then
- removepkg /$ROOT/var/log/packages/$1-[0-9]*
- fi
- fi
- ;;
- "-s"|"--search")
- if [ ! -z "$2" ]; then
- eval "grep -l '\/$2$' /$ROOT/var/log/packages/*"
- fi
- ;;
- "-d"|"--description")
- if [ ! -z "$2" ]; then
- for file in $LIST_PKGS; do
- pack="`package_name $file`"
- echo -e " Package description for $file:\n"
- sed -n "/^$pack:/ { s/$pack://; p; }" $file
- done
- else
- head_line
- exit 1
- fi
- ;;
- *)
- if [ ! -z "$LIST_PKGS" ]; then
- for pack in $LIST_PKGS; do
- echo $pack
- done
- else
- if [ ! -z "$ROOT" ]; then
- echo "$1: package not found on /$ROOT/var/log/packages"
- else
- echo "$1: package not found on /var/log/packages"
- fi
- fi
- ;;
-esac
diff --git a/branches/0.6/src/mkbuild b/branches/0.6/src/mkbuild
deleted file mode 100755
index 60566dd..0000000
--- a/branches/0.6/src/mkbuild
+++ /dev/null
@@ -1,732 +0,0 @@
-#!/bin/bash
-#
-# mkbuild: SlackBuild scripts maker
-# feedback: rudsonaalves at yahoo.com.br | gpl
-#
-# mkbuild is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# mkbuild is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-#
-# Based in model generic.SlackBuild of Luiz
-#
-# Version 1.0.0
-PROG_VERSION=1.0.0
-PROG_NAME=`basename $0`
-
-#--------------------------------------------------------------------
-# Functions
-#--------------------------------------------------------------------
-function mkbuild_use()
-
-{
- # mkbuild help function
- echo "
-NAME
- mkbuild - create SlackBuild script from .mkbuild input file
-
-SYNOPSIS
- mkbuild [OPIONS] [mkbuild_file]
-
-DESCRIPTION
- <mkbuild_file> input file with build rules and variables
-
- Input options:
- -a, --author <author_name>
- author name
- -ai, --author_initials <initials>
- author signature
- -cs, --const_string <string>
- construction string to source name
- -u, --url <url_address>
- url address to source
- -pn, --pkg_name <package_name>
- package name
- -sn, --src_name <source_name>
- source name
- -pv, --pkg_version <version>
- package version
- -md, --model <SlackBuild_model>
- SlackBuild model file
- -j, --jobs <jobs_number>
- Number of jobs to run simultaneously
- --prefix <install_dir>
- Prefix install directory
-
- Program options:
- -h, --help
- this help mesage
- -c, --commit
- commit SlackBuilds in local svn tree
- -v, --version
- program version
- -V, --verbose
- print debug information
-
-EXAMPLES
- mkbuild --prefix /usr/local pyrex.mkbuild
- build pyrex.SlackBuild with prefix /usr/local and pyrex.mkbuild
- variables and options definitions.
-
-AUTHOR
- Written by Rduson R. Alves
-
-AVAILABILITY
- by svn: svn checkout svn://slack.sarava.org/simplepkg
- this mkbuild is found in branches/0.6/
-
-REPORTING BUGS
- Report bugs to <alves_list@yahoo.com.br>
-
-COPYRIGHT
- Copyright © 2006 Free Software Foundation, Inc.
- This is free software. You may redistribute copies of it under the
- terms of the GNU General Public License
- <http://www.gnu.org/licenses/gpl.html>. There is NO WARRANTY, to the
- extent permitted by law.
-" | less
-}
-
-function error_codes {
-
- # Start error codes function
- NULL_STRING=499
- ERROR_FILE_NOT_FOUND=500
- ERROR_CONSTRUCTION=501
- ERROR_PROGRAM=502
- ERROR_INPUT_PAR=503
-}
-
-function mkbuild_error {
-
- # Error function
- case $1 in
- "$ERROR_FILE_NOT_FOUND")
- echo "File $2 not found!"
- ;;
- "$ERROR_CONSTRUCTION")
- echo "Construction error in $2 variable."
- ;;
- "$ERROR_PROGRAM")
- echo "Program logical error."
- ;;
- "$ERROR_INPUT_PAR")
- echo "Input parameter $2 error. See \"mkbuild --help\"."
- ;;
- "$NULL_STRING")
- mkbuild_use
- ;;
- *)
- echo "Unknow error!"
- ;;
- esac
- exit $1
-}
-
-function set_parameters {
-
- # Get and set mkbuild variables with parameters input
- # Use: set_parameters $@
- # where $@ are the parameters input
- #
- ALL_PAR=( $@ ) # all parameters
- N_PAR=$# # number of parameters
-
- i=0 # start counter
-
- # analyze all the parameters
- while [ $i -lt $N_PAR ]; do
- # get parameter[i]
- PAR=${ALL_PAR[$i]}
- case $PAR in
- '-c'|'--commit')
- # Commit directory
- COMMIT=$on
- ;;
- '-d'|'--debug')
- # Debug mode
- set -x
- ;;
- '-h'|'--help' )
- # Show help mesage
- mkbuild_use && exit 0
- ;;
- '-v'|'--version')
- # Show program version
- echo -e "\n$PROG_NAME version $PROG_VERSION\n" && exit 0
- ;;
- '-V' | '--verbose')
- # Enable verbose mode
- VERBOSE=1
- ;;
- '-a'|'--author')
- # Enter with author name
- let i++
- AUTHOR=${ALL_PAR[$i]}
- [ ${AUTHOR:0:1} = "-" ] && mkbuild_error $ERROR_INPUT_PAR AUTHOR
- ;;
- '-ai'|'--author_initials')
- # Enter with author name
- let i++
- AUTHOR_INITIALS=${ALL_PAR[$i]}
- [ ${AUTHOR_INITIALS:0:1} = "-" ] && mkbuild_error $ERROR_INPUT_PAR AUTHOR_INITIALS
- ;;
- '-cs'|'--const_string')
- # Enter with construction source name string
- let i++
- CONST_STRING=${ALL_PAR[$i]}
- [ ${CONST_STRING:0:1} = "-" ] && mkbuild_error $ERROR_INPUT_PAR CONST_STRING
- ;;
- '-md'|'--model')
- # Enter with SlackBuild model
- let i++
- MODEL=${ALL_PAR[$i]}
- [ ${MODEL:0:1} = "-" ] && mkbuild_error $ERROR_INPUT_PAR MODEL
- ;;
- '-j'|'--jobs')
- # Enter with SlackBuild model
- let i++
- NUMJOBS=${ALL_PAR[$i]}
- [ ${NUMJOBS:0:1} = "-" ] && mkbuild_error $ERROR_INPUT_PAR NUMJOBS
- [ ! is_number $NUMJOBS ] && mkbuild_error $ERROR_INPUT_PAR NUMJOBS
- NUMJOBS="-j$NUMJOBS"
- ;;
- '--prefix')
- # Enter with SlackBuild model
- let i++
- PREFIX=${ALL_PAR[$i]}
- [ ${PREFIX:0:1} = "-" ] && mkbuild_error $ERROR_INPUT_PAR PREFIX
- ;;
- '-pn'|'--pkg_name')
- # Enter with package name
- let i++
- PKG_NAME=${ALL_PAR[$i]}
- [ ${PKG_NAME:0:1} = "-" ] && mkbuild_error $ERROR_INPUT_PAR PKG_NAME
- ;;
- '-pv'|'pkg_version')
- # Enter with package version
- let i++
- VERSION=${ALL_PAR[$i]}
- [ ${VERSION:0:1} = "-" ] && mkbuild_error $ERROR_INPUT_PAR VERSION
- ;;
- '-sn'|'--src_name')
- # Enter with source name
- let i++
- SRC_NAME=${ALL_PAR[$i]}
- [ ${SRC_NAME:0:1} = '-' ] && mkbuild_error $ERROR_INPUT_PAR SRC_NAME
- ;;
- '-u'|'--url')
- # Enter with url address
- let i++
- URL=${ALL_PAR[$i]}
- [ ${URL:0:1} = '-' ] && mkbuild_error $ERROR_INPUT_PAR URL
- ;;
- *)
- # mkbuild input file
- MK_INPUT_FILE="${PAR//.mkbuild}.mkbuild"
- [ ! -e $MK_INPUT_FILE ] && mkbuild_error $ERROR_FILE_NOT_FOUND $MK_INPUT_FILE
- ;;
- esac
- let i++
- done
-}
-
-function get_variable {
-
- # Get variable value from mkbuild file (MK_INPUT_FILE)
- [ $# -ne 1 ] && mkbuild_error $ERROR_PROGRAM
- [ -z $MK_INPUT_FILE ] && echo "Warning: no [mkbuild_file]." && return 0
-
- grep "^\[\[${1}\]\]" $MK_INPUT_FILE | cut -f2- -d= | tr -d '\"'
-}
-
-function edit_file {
-
- # Edit file $3, by change string [[$1]] to $2
- local STR_OLD
- local STR_NEW
-
- [ $# -ne 3 ] && mkbuild_error $ERROR_PROGRAM
- STR_OLD=$( echo $1 | sed 's/\//\\\//g' )
- STR_NEW=$( echo $2 | sed 's/\//\\\//g' )
- eval "sed 's/\[\[$STR_OLD\]\]/$STR_NEW/' $3 > $AUX_TMP"
- mv $AUX_TMP $3
-}
-
-function edit_file_full {
-
- # Edit file $3, by change string $1 to $2
- local STR_OLD
- local STR_NEW
-
- [ $# -ne 3 ] && mkbuild_error $ERROR_PROGRAM
- STR_OLD=$( echo $1 | sed 's/\//\\\//g' )
- STR_NEW=$( echo $2 | sed 's/\//\\\//g' )
- eval "sed 's/$STR_OLD/$STR_NEW/' $3 > $AUX_TMP"
- mv $AUX_TMP $3
-}
-
-function start_build {
-
- # Build initial sections
- [ $# -ne 1 ] && mkbuild_error $ERROR_PROGRAM
-
- edit_file "SLACKBUILD AUTHOR" "$AUTHOR" $1
- edit_file "SLACKBUILD AUTHOR INITIALS" $AUTHOR_INITIALS $1
- edit_file "SOURCE NAME" "$SRC_NAME" $1
- edit_file "PROGRAM NAME" "$PKG_NAME" $1
- edit_file "PACKAGE NAME" "$PKG_NAME" $1
- edit_file "DECOMPRESSOR" "$DECOMPRESSOR" $1
- edit_file "DECOMPRESSOR TEST FLAG" "$DECOMPRESSOR_TEST_FLAG" $1
- edit_file "PROGRAM URL" "$URL" $1
- edit_file "ARCH" "$ARCH" $1
- [ `is_number $NUMJOBS` ] && NUMJOBS="-j${NUMJOBS}"
- edit_file "NUMBER OF JOBS" "$NUMJOBS" $1
- edit_file "VERSION" $VERSION $1
- edit_file "SOURCE NAME CONSTRUCTION STRING" "$CONST_STRING" $1
- edit_file "EXTENSION" "$EXTENSION" $1
- edit_file "DOWNLOAD FOLDER URL" "$URL_BASE" $1
- edit_file "OTHER CONFIGURE ARGS" "$OPTIONS" $1
- edit_file "DOCUMENTATION FILES" "$DOCFILES" $1
- edit_file "PREFIX" "$PREFIX" $1
-
- edit_file_full "\$EXTENSION" "$EXTENSION" $1
-}
-
-function clear_files {
-
- # Remove temporary files
- rm $AUX_TMP 2>/dev/null
- rm $SLACKBUILD_TEMP 2>/dev/null
- chmod 755 *.SlackBuild
-}
-
-function set_status {
-
- # Set status section
- # $1 - Section
- # $2 - Status
- # $3 - file
- [ $# -ne 3 ] && mkbuild_error $ERROR_PROGRAM
- if [ "`get_status $1 $3`" != "all" ]; then
- eval "sed 's/^<$1>.*$/<$1> $2/' $3" > $AUX_TMP
- mv $AUX_TMP $3
- else
- echo "Warning: Section $1 have status all. Can't change!"
- fi
-}
-
-function get_status {
-
- # Get status from section
- # $1 - Section
- # $2 - file
- [ $# -ne 2 ] && mkbuild_error $ERROR_PROGRAM
- eval "sed '/^<$1>.*$/! d' $2"
-}
-
-function activate_sections {
-
- # Enable and desable sections
- ACTIONS_LIST=`sed '/^#>>/,/<</ ! d; /^#/ d ' $MK_INPUT_FILE | tr -d ' '`
- for i in $ACTIONS_LIST; do
- STATUS=`echo $i | cut -f1 -d:`
- SECTION=`echo $i | cut -f2 -d:`
- set_status $SECTION $STATUS $SLACKBUILD_TEMP
- done
-}
-
-function build_slackbuild {
-
- # Remove off sections
- [ -e $SLACKBUILD ] && mv $SLACKBUILD $SLACKBUILD.old
- sed '/^<[a-z].*> off/, /^<\/[a-z].*>$/ d' $SLACKBUILD_TEMP > $AUX_TMP
- # Remove sections names
- sed '/^<.*$/ d' $AUX_TMP > $SLACKBUILD_TEMP
- # Remove clear lines
- sed ':i ; $! N; s/\n/<NL>/ ; t i' $SLACKBUILD_TEMP | sed 's/<NL><NL><NL>/<NL><NL>/g' | sed 's/<NL><NL><NL>/<NL><NL>/g' | sed 's/<NL>/\n/g' > $AUX_TMP
- sed '1,/^#\!/ {/^#\!/ b; d }' $AUX_TMP > $SLACKBUILD
-}
-
-function section_edit {
-
- # Edits a section substituting its content
- [ -z $MK_INPUT_FILE ] && return 0
-
- SECTION_LIST=`grep '^#>[a-z]' $MK_INPUT_FILE | cut -c3-`
-
- # Check for sections change
- [ -z "$SECTION_LIST" ] && return 0
-
- # Change sections
- for i in $SECTION_LIST; do
- if [ "$i" = "slackdesc" ]; then
- # Special slackdesc section
- slackdesc_edit > $AUX_TMP
- mv $AUX_TMP $SLACKBUILD_TEMP
- else
- # Others sections
- section_change $i
- fi
- done
-}
-
-function slackdesc_edit {
-
- # Edit slackdesc section
- sed -n '1,/|-----/ { /<slackdesc>/ b; /|-----/ b; p; }' $SLACKBUILD_TEMP
- echo -n $PKG_NAME | tr [a-z+\-] " "
- echo -n "|-----handy-ruler"
- let N=18+${#PKG_NAME}
- for i in `seq $N $SLACKDESC_LEN`; do
- echo -n "-"
- done
- echo -en "|\n"
-
- sed -n '/#>slackdesc/,/#<slackdesc/ { /^#/ b; p }' $MK_INPUT_FILE
- sed '1, /\[\[SLACK-DESC\]\]/ d' $SLACKBUILD_TEMP
-}
-
-function section_change {
-
- # Change section lines
- [ $# -ne 1 ] && mkbuild_error $ERROR_PROGRAM
-
- # Copy first half
- eval "sed '1,/^<$1>/! d' $SLACKBUILD_TEMP > $AUX_TMP"
- # Paste new section
- eval "sed -n '/#>$1/,/#<$1/ { /^#>/ b; /^#</ b; p }' $MK_INPUT_FILE >> $AUX_TMP"
- # Copy second halt
- eval "sed '/^<\/$1>/,$ ! d' $SLACKBUILD_TEMP >> $AUX_TMP"
-
- mv $AUX_TMP $SLACKBUILD_TEMP
-}
-
-function make_slack_required {
-
- # Build slack-required file
- [ -e slack-required ] && mv slack-required slack-required.old
- [ -z "$SLACK_REQUIRED" ] && return 0
-
- echo -e "# Dependency list to $SRC_NAME\n#\n# dependency [condition] [version]]" > slack-required
-
- echo $SLACK_REQUIRED | sed 's/:/\n/g' | while read i; do
- REQ=`echo $i | awk '{ print $1 }'`
- CON=`echo $i | awk '{ print $2 }'`
- VER=`echo $i | awk '{ print $3 }'`
- echo -e "$REQ\t\t$CON\t\t$VER" >> slack-required
- done
-}
-
-function change_others_parameters {
-
- # Change others parameters started by '[[' in .mkbuild file
- grep '\[\[[A-Za-z]' $MK_INPUT_FILE | while read i; do
- CHANGE="`echo $i | sed 's/\[\[\(.*\)\]\]=\"\(.*\)\"/\1/'`"
- VALUE="`echo $i | sed 's/\[\[\(.*\)\]\]=\"\(.*\)\"/\2/'`"
- edit_file "$CHANGE" "$VALUE" $SLACKBUILD
- done
-}
-
-function commit_slackbuild {
-
- # Commit SlackBuild in local Slack.Sarava tree
- if [ $UID -ne 0 ]; then
- echo "Only root can commit SlackBuilds..."
- return 1
- fi
-
- # check SlackBuilds directory
- [ ! -e $SLACKBUILDS_DIR ] && createpkg --sync
-
- # Get SlackBuild path
- # Get SlackBuild path in parameter file
- SLACKBUILD_PATH=`validate_parameter "$SLACKBUILD_PATH" "SLACKBUILD PATH" ""`
- # Get SlackBuild path in slackbuild local tree
- if [ $? -ne 0 ]; then
- SLACKBUILD_PATH=`find $SLACKBUILDS_DIR -name $SLACKBUILD | xargs dirname`
- fi
- # Get SlackBuild path in gentoo-portage tree
- if [ "$SLACKBUILD_PATH" == "" ]; then
- # Mount SlackBuild path
- [ $VERBOSE -eq $on ] && echo -e "\nFind SlackBuild PATH in Slack.Sarava tree..."
- AUX=`lynx -connect_timeout=10 -dump http://gentoo-portage.com/Search?search=$PKG_NAME | sed -n '/Results:/,+1 { /Results:/ b ; p }' | head --lines=1 | tr -d " "`
- [ ! -z $AUX ] && SLACKBUILD_PATH="`dirname $AUX | tr - /`/`basename $AUX`" || SLACKBUILD_PATH="others/unclassified/$PKG_NAME"
- fi
-
- # change to SlackBuilds directory
- cd $SLACKBUILDS_DIR/
-
- # Add SlackBuild scripts
- # check path
- [ ! -e $SLACKBUILD_PATH ] && svn_mkdir $SLACKBUILD_PATH
- # add SlackBuild
- svn_add $SLACKBUILD $SLACKBUILD_PATH
-
- # check slack-required
- # add slack-required
- [ -e $WORK/slack-required ] && svn_add slack-required $SLACKBUILD_PATH
-
- cd $WORK
-}
-
-function svn_mkdir {
-
- # svn make directory
- [ $# -ne 1 ] && mkbuild_error 0
-
- echo "svn_mkdir $1 $2"
- DIR_LIST=`echo $1 | tr '/' ' '`
-
- DIR=""
- for i in $DIR_LIST; do
- DIR=$DIR/$i
- [ ! -e ${DIR:1} ] && svn mkdir ${DIR:1}
- done
-}
-
-function svn_add {
-
- # svn add file
- [ $# -ne 2 ] && mkbuild_error 0
-
- # copy file
- if [ -e $2/$1 ]; then
- echo "$2/$1 exist. Overwriter it."
- cp $WORK/$1 $2/
- else
- cp $WORK/$1 $2/
- # add file to svn tree
- svn add $2/$1
- fi
-}
-
-function is_number {
-
- # Check if $1 is a number
- local -i int
- if [ $# -eq 0 ]; then
- return 1
- else
- (let int=$1) 2>/dev/null
- return $? # Exit status of the let thread
- fi
-}
-
-function validate_parameter {
-
- # Validate parameter in .mkbuild file
- if [ ! -z "$1" ]; then
- echo "$1"
- else
- local STRING="`get_variable "$2"`"
- if [ -z "$STRING" ]; then
- [ ! -z "$3" ] && echo "$3" || return 1
- else
- echo "$STRING"
- fi
- fi
-}
-
-function decompress_find {
-
- # Find decompressor program and test flag
- case $EXTENSION in
- 'gz'|'GZ')
- DECOMPRESSOR="gunzip"
- DECOMPRESSOR_TEST_FLAG="-t"$NULL_STRING
- ;;
- 'bz2'|'BZ2')
- DECOMPRESSOR="bunzip2"
- DECOMPRESSOR_TEST_FLAG="-t"
- ;;
- 'zip'|'ZIP')
- DECOMPRESSOR="unzip"
- DECOMPRESSOR_TEST_FLAG="-t"
- ;;
- *)
- mkbuild_error $ERROR_CONSTRUCTION "DECOMPRESSOR"
- ;;
- esac
-}
-
-#=============================
-# Main Program
-#=============================
-#-----------------------------
-# Common functions
-COMMON="/usr/libexec/simplepkg/common.sh"
-SIMPLEPKG_CONF="/etc/simplepkg/simplepkg.conf"
-WORK=`pwd`
-LANG=en_US
-
-if [ -f "$COMMON" ]; then
- source $COMMON
-else
- echo "error: file $COMMON found, check your $BASENAME installation"
- mk_exit 0
-fi
-
-# Start constants
-set_constants
-
-# Set commit off
-COMMIT=$off
-# Set verbose off
-VERBOSE=$off
-# Createpkg and mkbuild section
-SLACKBUILDS_DIR="`eval_parameter SLACKBUILDS_DIR /var/slackbuilds`"
-# Auxiliar file
-AUX_TMP=/tmp/mkbuild_tmp.$RANDOM
-# Derectory to SlackBuild models
-MODEL_DIR=${MODEL_DIR:="/etc/simplepkg/defaults/mkbuild"}
-# SlackDesk line length
-SLACKDESC_LEN=78
-
-# Load error codes
-error_codes
-
-[ $# -eq 0 ] && mk_exit $NULL_STRING
-
-# Configure input parameters
-set_parameters $@
-
-[ $VERBOSE -eq $on ] && echo -e "$PROG_NAME version $PROG_VERSION\n"
-
-# Get values
-# Author name
-AUTHOR=${AUTHOR:="`get_variable "SLACKBUILD AUTHOR"`"}
-[ -z "$AUTHOR" ] && mkbuild_error $ERROR_CONSTRUCTION "SLACKBUILD AUTHOR"
-[ $VERBOSE -eq $on ] && echo "[[SLACKBUILD AUTHOR]]=\"$AUTHOR\""
-
-# Author initials
-STR_MOUNT=`echo $AUTHOR | sed 's/ /\n/g' | sed 's/^\([A-Z]\).*/\1/' | sed ':i; $!N; s/\n//; ti' | tr [A-Z] [a-z]`
-AUTHOR_INITIALS="`validate_parameter "$AUTHOR_INITIALS" "SLACKBUILD AUTHOR INITIALS" "$STR_MOUNT"`" || mkbuild_error $ERROR_CONSTRUCTION "SLACKBUILD AUTHOR INITIALS"
-[ $VERBOSE -eq $on ] && echo "[[SLACKBUILD AUTHOR INITIALS]]=\"$AUTHOR_INITIALS\""
-
-# URL program
-URL=`validate_parameter "$URL" "DOWNLOAD FOLDER URL" ""` || mkbuild_error $ERROR_CONSTRUCTION "URL"
-[ $VERBOSE -eq $on ] && echo "[[URL]]=\"$URL\""
-
-STR_MOUNT="`echo $URL | rev | cut -c1-3 | rev | tr -d '.'`"
-if [ $STR_MOUNT = "gz" -o $STR_MOUNT = "tgz" -o $STR_MOUNT = "bz2" -o $STR_MOUNT = "zip" ]; then
- SOURCE_NAME=`basename $URL`
- URL_BASE=`dirname $URL`
-else
- URL_BASE=$URL
-fi
-[ $VERBOSE -eq $on ] && echo "[[DOWNLOAD FOLDER URL]]=\"$URL_BASE\""
-
-# Extension
-EXTENSION=`validate_parameter "$EXTENSION" "EXTENSION" "$STR_MOUNT"` || mkbuild_error $ERROR_CONSTRUCTION "EXTENSION"
-[ $VERBOSE -eq $on ] && echo "[[EXTENSION]]=\"$EXTENSION\""
-
-# Build archteture
-ARCH=`validate_parameter "$ARCH" "ARCH" "i486"`
-[ $VERBOSE -eq $on ] && echo "[[ARCH]]=\"$ARCH\""
-
-# Source name
-STR_MOUNT=`echo $SOURCE_NAME | sed -r 's/(.*)-(.*)\.(.*\..*)$/\1/'`
-SRC_NAME=`validate_parameter "$SRC_NAME" "SOURCE NAME" "$STR_MOUNT"` || mkbuild_error $ERROR_CONSTRUCTION "SOURCE NAME"
-[ $VERBOSE -eq $on ] && echo "[[SOURCE NAME]]=\"$SRC_NAME\""
-
-# Package name
-STR_MOUNT=`echo $SRC_NAME | tr [A-Z_] [a-z\-]`
-PKG_NAME=`validate_parameter "$PKG_NAME" "PACKAGE NAME" "$STR_MOUNT"`
-[ $VERBOSE -eq $on ] && echo "[[PACKAGE NAME]]=\"$PKG_NAME\""
-
-# Version
-STR_MOUNT=`echo $SOURCE_NAME | sed -r 's/(.*)-(.*)\.(.*\..*)$/\2/'`
-VERSION=`validate_parameter "$VERSION" "VERSION" $STR_MOUNT` || mkbuild_error $ERROR_CONSTRUCTION "VERSION"
-[ $VERBOSE -eq $on ] && echo "[[VERSION]]=\"$VERSION\""
-
-# Construction source name string
-CONST_STRING="`validate_parameter "$CONST_STRING" "SOURCE NAME CONSTRUCTION STRING" "\\\$SRC_NAME-\\\$VERSION.tar.$EXTENSION"`"
-[ $VERBOSE -eq $on ] && echo "[[SOURCE NAME CONSTRUCTION STRING]]=\"$CONST_STRING\""
-
-# Build Source Name
-[ -z $SOURCE_NAME ] && SOURCE_NAME=`eval "echo $CONST_STRING"`
-[ $VERBOSE -eq $on ] && echo "SOURCE_NAME=\"$SOURCE_NAME\""
-
-# Decompressor program and test flag
-DECOMPRESSOR=`validate_parameter "$DECOMPRESSOR" "DECOMPRESSOR" ""` || decompress_find
-[ $VERBOSE -eq $on ] && echo "[[DECOMPRESSOR]]=\"$DECOMPRESSOR\""
-
-DECOMPRESSOR_TEST_FLAG=`validate_parameter "$DECOMPRESSOR_TEST_FLAG" "DECOMPRESSOR TEST FLAG" ""` || mkbuild_error $ERROR_CONSTRUCTION "DECOMPRESSOR TEST FLAG"
-[ $VERBOSE -eq $on ] && echo "[[DECOMPRESSOR TEST FLAG]]=\"$DECOMPRESSOR_TEST_FLAG\""
-
-# Documentations list
-DOCFILES=`validate_parameter "$DOCFILES" "DOCUMENTATION FILES" "NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*"`
-[ $VERBOSE -eq $on ] && echo "[[DOCUMENTATION FILES]]=\"$DOCFILES\""
-
-# ./configure option
-OPTIONS=`validate_parameter "$OPTIONS" "OTHER CONFIGURE ARGS" ""`
-[ $VERBOSE -eq $on ] && echo "[[OTHER CONFIGURE ARGS]]=\"$OPTIONS\""
-
-# PREFIX
-PREFIX=`validate_parameter "$PREFIX" "PREFIX" "/usr"`
-[ $VERBOSE -eq $on ] && echo "[[PREFIX]]=\"$PREFIX\""
-
-# Number of jobs
-NUMJOBS=`validate_parameter "$NUMJOBS" "NUMBER OF JOBS" ""`
-[ $VERBOSE -eq $on ] && echo "[[NUMBER OF JOBS]]=\"$NUMJOBS\""
-
-# Make slack-required file.
-SLACK_REQUIRED=`validate_parameter "$SLACK_REQUIRED" "SLACK REQUIRED" ""`
-[ $VERBOSE -eq $on ] && echo "[[SLACK REQUIRED]]=\"$SLACK_REQUIRED\""
-
-# SlackBuild model
-MODEL=`validate_parameter "$MODEL" "SLACKBUILD MODEL" "generic.mkSlackBuild"`
-[ $VERBOSE -eq $on ] && echo "[[SLACKBUILD MODEL]]=\"$MODEL\""
-
-#
-# Start build SlackBuild
-SLACKBUILD=${PKG_NAME}.SlackBuild
-SLACKBUILD_TEMP=$SLACKBUILD.tmp
-cp $MODEL_DIR/$MODEL $SLACKBUILD_TEMP
-[ $VERBOSE -eq $on ] && echo -en "\nStart SlackBuild make"
-
-# Change strings from model
-start_build $SLACKBUILD_TEMP
-[ $VERBOSE -eq $on ] && echo -en "\nEdit mkSlackBuild model .."
-
-# On/Off sections
-activate_sections
-[ $VERBOSE -eq $on ] && echo -en ".\nEnable and desable sections .."
-
-# Change sections
-section_edit
-[ $VERBOSE -eq $on ] && echo -en ".\nChange sections .."
-
-# Remove off sections
-build_slackbuild
-[ $VERBOSE -eq $on ] && echo -en ".\nRemove off sections .."
-
-# Make slack-required file
-make_slack_required
-[ $VERBOSE -eq $on ] && echo -en ".\nMake slack-required file .."
-
-if [ -e slack-required ]; then
- DEPENDENCY_LIST="`cat slack-required | awk '{print $1}' | grep '^[a-z]' | tr '\012' ' '`"
- edit_file "REQUIRES" "$DEPENDENCY_LIST" $SLACKBUILD
-else
- edit_file "REQUIRES" "Null" $SLACKBUILD
-fi
-
-# Others changes
-change_others_parameters
-[ $VERBOSE -eq $on ] && echo -en ".\nEdit others [[]] parameters .."
-
-# Clear temporary files
-clear_files
-[ $VERBOSE -eq $on ] && echo -e ".\nRemove temporary files ..."
-
-[ $COMMIT -eq $on ] && commit_slackbuild
diff --git a/branches/0.6/src/mkjail b/branches/0.6/src/mkjail
deleted file mode 100755
index f6c935c..0000000
--- a/branches/0.6/src/mkjail
+++ /dev/null
@@ -1,113 +0,0 @@
-#!/bin/bash
-#
-# mkjail v0.4: chroot jail maker
-#
-# feedback: rhatto at riseup.net | GPL
-#
-# Mkjail is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# Mkjail is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-
-COMMON="/usr/libexec/simplepkg/common.sh"
-BASENAME="`basename $0`"
-
-if [ -f "$COMMON" ]; then
- source $COMMON
-else
- echo "error: file $COMMON found, check your `basename $0` installation"
- exit 1
-fi
-
-function usage {
-
- echo "usage: [ARCH=arch] [VERSION=version] [ROOT=/otherroot] $BASENAME <jail-name> [template]"
- exit 1
-
-}
-
-function exec_post_install_scripts {
-
- # exec post installation scripts
- # usage: exec_post_install_script <jail-root> <jail-name>
-
- local list
-
- if [ -z "$2" ]; then
- return 1
- fi
-
- echo "$BASENAME: executing template scripts..."
- if [ -d "$TEMPLATE_BASE.s" ]; then
- for file in $TEMPLATE_BASE.s/*; do
- if [ -x "$file" ]; then
- $file $1 $2
- fi
- done
- fi
-
-}
-
-function jailist_update {
-
- # update the jail list file
- # usage: jailist_update <jail-path>
-
- if [ "$ADD_TO_JAIL_LIST" == "1" ]; then
- touch $JAIL_LIST
- if ! grep -q -e "^$1\$" $JAIL_LIST; then
- echo $1 >> $JAIL_LIST
- fi
- fi
-
-}
-
-if [ -z "$1" ]; then
- usage
-else
- server="$1"
- eval_config $BASENAME -u
-fi
-
-if [ ! -z "$2" ]; then
- search_template $2
- result="$?"
-else
- search_default_template
- result="$?"
-fi
-
-if [ "$result" != "0" ]; then
- exit 1
-fi
-
-TEMPLATE="$TEMPLATE_BASE.template"
-
-if [ ! -d "$JAIL_ROOT/$server" ]; then
- mkdir -p $JAIL_ROOT/$server
-else
- if [ ! -z "`ls $JAIL_ROOT/$server | grep -v 'lost+found'`" ]; then
- echo $BASENAME: error: folder $JAIL_ROOT/$server already exists and seens to be not empty
- echo $BASENAME: probably the jail $1 already exists
- exit 1
- fi
-fi
-
-echo "$BASENAME: instaling packages into $JAIL_ROOT/$server using $TEMPLATE..."
-
-install_packages
-copy_template_files $JAIL_ROOT/$server
-set_jail_perms $JAIL_ROOT/$server
-jailist_update $JAIL_ROOT/$server
-exec_post_install_scripts $JAIL_ROOT $server
-
-echo $BASENAME: done creating $server jail
-
diff --git a/branches/0.6/src/rebuildpkg b/branches/0.6/src/rebuildpkg
deleted file mode 100755
index 6d3d10c..0000000
--- a/branches/0.6/src/rebuildpkg
+++ /dev/null
@@ -1,87 +0,0 @@
-#!/bin/bash
-#
-# rebuildpkg: build a package from a /var/log/packages entry
-#
-# feedback: rhatto at riseup.net | gpl
-#
-# Rebuildpkg is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# Rebuildpkg is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-
-COMMON="/usr/libexec/simplepkg/common.sh"
-TMP="/tmp"
-
-function usage {
- echo "usage: ROOT=/otherroot `basename $0` <package-name>"
-}
-
-if [ -f "$COMMON" ]; then
- source $COMMON
-else
- echo "error: file $COMMON found, check your `basename $0` installation"
- exit 1
-fi
-
-if [ -z "$1" ]; then
- usage
- exit 1
-fi
-
-pack="$1"
-
-for file in `ls $ROOT/var/log/packages/$pack*`; do
- if [[ "`package_name $file.tgz`" == "$pack" ]]; then
- package_file="$file"
- break
- fi
-done
-
-if [ -z "$package_file" ]; then
- echo error: package $pack does not exist
- exit 1
-fi
-
-if [ -d "$TMP/package-$pack" ]; then
- rm -rf $TMP/package-$pack
-fi
-
-mkdir $TMP/package-$pack
-cd $TMP/package-$pack
-
-for file in `grep -v -e "^PACKAGE NAME:" -e "^UNCOMPRESSED PACKAGE SIZE:" \
- -e "^COMPRESSED PACKAGE SIZE:" -e "^PACKAGE LOCATION:" \
- -e "^PACKAGE DESCRIPTION:" -e "^$pack:" -e "^FILE LIST:" $package_file`; do
-
- if [ "$file" != "install" ] && [ "$file" != "install/slack-desc" ] && [ "$file" != "install/doinst,sh" ]; then
- if [ -d /$file ]; then
- mkdir -p $TMP/package-$pack/$file
- elif [ -f /$file ]; then
- cp /$file $TMP/package-$pack/$file
- else
- echo file /$file was not found, please add it manually, exploding and making the package again
- fi
- fi
-
-done
-
-mkdir $TMP/package-$pack/install
-grep "^$pack:" $package_file > $TMP/package-$pack/install/slack-desc
-
-package_name="`grep "PACKAGE NAME:" $package_file | awk '{ print $3 }'`"
-
-if [ -f "$ROOT/var/log/scripts/$package_name" ]; then
- cp $ROOT/var/log/scripts/$package_name $TMP/package-$pack/install/doinst.sh
-fi
-
-makepkg $package_name.tgz
-mv $package_name.tgz $TMP/
-echo "done: package rebuilt and stored at $TMP/$package_name.tgz"
diff --git a/branches/0.6/src/repos b/branches/0.6/src/repos
deleted file mode 100755
index e4a17ee..0000000
--- a/branches/0.6/src/repos
+++ /dev/null
@@ -1,87 +0,0 @@
-#!/bin/bash
-#
-# repos script got from
-# http://software.jaos.org/BUILD/slapt-get/FAQ.html#slgFAQ17
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# any later version.
-#
-# Changes by rhatto at riseup.net to fit http://slack.sarava.org needs
-#
-
-BASENAME="`basename $0`"
-REPOS_CONF="/etc/simplepkg/repos.conf"
-COMMON="/usr/libexec/simplepkg/common.sh"
-
-if [ -f "$COMMON" ]; then
- source $COMMON
-else
- echo "error: file $COMMON found, check your $BASENAME installation"
- exit 1
-fi
-
-function usage {
-
- echo "`basename $0` [pkg [file]|all|new|svnmeta|PACKAGESTXT|FILELIST|MD5]"
-
-}
-
-function do_all {
-
- for pkg in `find . -type f -name '*.tgz' -print`; do
- gen_meta $pkg
- done
- $0 PACKAGESTXT
- $0 FILELIST
- $0 MD5
-
-}
-
-# ---------------------------------
-# main
-# ---------------------------------
-
-case "$1" in
- pkg)
- if [ -n "$2" ]; then
- gen_meta $2
- else
- usage
- fi
- ;;
- all)
- do_all
- ;;
- new)
- for pkg in `find . -type f -name '*.tgz' -print`; do
- if [ ! -f ${pkg%tgz}meta ]; then
- gen_meta $pkg
- fi
- done
- ;;
- svnmeta)
- svn_add_meta
- ;;
- PACKAGESTXT)
- gen_packages_txt .
- gen_packages_txt patches
- ;;
- FILELIST)
- gen_filelist
- gen_patches_filelist patches
- ;;
- MD5)
- gen_md5_checksums .
- gen_md5_checksums patches
- ;;
- usage)
- usage
- ;;
- *)
- do_all
- svn_add_meta
- ;;
-esac
-
diff --git a/branches/0.6/src/simplaret b/branches/0.6/src/simplaret
deleted file mode 100755
index 00b0c25..0000000
--- a/branches/0.6/src/simplaret
+++ /dev/null
@@ -1,1045 +0,0 @@
-#!/bin/bash
-#
-# simplaret v0.2: simplepkg's retrieval tool
-# feedback: rhatto at riseup.net | gpl
-#
-# Simplaret is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# Simplaret is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-
-BASENAME="`basename $0`"
-REPOS_CONF="/etc/simplepkg/repos.conf"
-COMMON="/usr/libexec/simplepkg/common.sh"
-
-if [ -f "$COMMON" ]; then
- source $COMMON
-else
- echo "error: file $COMMON found, check your $BASENAME installation"
- exit 1
-fi
-
-function simplaret_usage {
-
- echo "usage: [ARCH=otherarch] [VERSION=otherversion] $BASENAME <OPTION> package-name"
- echo -e "\t OPTIONS: --install, --update, --upgrade, --search, --get, --get-patches, --purge, --remove"
- exit 1
-
-}
-
-function simplaret_get_index {
-
- for file in `simplaret_metafiles`; do
- simplaret_download $1 $file $2 --no-verbose
- done
-
-}
-
-function simplaret_backup_index {
-
- for file in `simplaret_metafiles`; do
- if [ -f "$1/$file" ]; then
- mv $1/$file $1/$file.old
- fi
- done
-
-}
-
-function simplaret_check_index {
-
- for file in `simplaret_metafiles`; do
- if [ ! -f "$1/$file" ] && [ -f "$1/$file" ]; then
- echo restoring old $file to $1...
- mv $1/$file.old $1/$file
- else
- rm -f $1/$file.old
- fi
- done
-
-}
-
-function simplaret_download {
-
- # download a file from a repo to a folder
- # usage: simplaret <repository_url> <package> <destination-folder> [--no-verbose]
-
- local protocol file
- local wget_timeout wget_passive_ftp wget_verbose
- local curl_timeout curl_passive_ftp curl_verbose
- local ncftpget_timeout ncftpget_passive_ftp
-
- protocol="`echo $1 | cut -d : -f 1`"
- file="`basename $2`"
-
- if [ ! -d "$3" ]; then
- mkdir -p $3
- fi
-
- if [ ! -z "$CONNECT_TIMEOUT" ] || [ "$CONNECT_TIMEOUT" != "0" ]; then
- wget_timeout="--timeout $CONNECT_TIMEOUT"
- ncftpget_timeout="-t $CONNECT_TIMEOUT"
- curl_timeout="--connect-timeout $CONNECT_TIMEOUT"
- fi
-
- if [ "$4" == "--no-verbose" ]; then
- wget_verbose="--no-verbose"
- curl_verbose="-#"
- echo ""
- fi
-
- if [ "$protocol" == "http" ]; then
-
- echo Getting $1/$file:
- if [ "$HTTP_TOOL" == "wget" ]; then
- wget $wget_timeout $wget_verbose $1/$2 -O $3/$file
- elif [ "$HTTP_TOOL" == "curl" ]; then
- curl $curl_timeout $curl_verbose $1/$2 > $3/$file
- else
- echo $BASENAME: error: invalid value for config variable HTTP_TOOL: $HTTP_TOOL
- echo $BASENAME: please check your config file $CONF
- exit 1
- fi
-
- elif [ "$protocol" == "ftp" ]; then
- echo Getting $1/$file:
-
- if [ "$PASSIVE_FTP" == "1" ]; then
- wget_passive_ftp="--passive-ftp"
- ncftpget_passive_ftp="-F"
- curl_passive_ftp="--ftp-pasv"
- fi
-
- if [ "$FTP_TOOL" == "ncftpget" ]; then
- ncftpget -c $ncftpget_timeout $ncftpget_passive_ftp $1/$2 > $3/$file
- elif [ "$FTP_TOOL" == "wget" ]; then
- wget $wget_timeout $wget_passive_ftp $wget_verbose $1/$2 -O $3/$file
- elif [ "$FTP_TOOL" == "curl" ]; then
- curl $curl_timeout $curl_passive_ftp $curl_verbose $1/$2 > $3/$file
- else
- echo $BASENAME: error: invalid value for config variable FTP_TOOL: $FTP_TOOL
- echo $BASENAME: please check your config file $CONF
- exit 1
- fi
-
- elif [ "$protocol" == "file" ]; then
-
- url="`echo $1 | sed -e 's/file:\/\///'`"
- if [ -f "$3/$file" ]; then
- rm -f $3/$file
- fi
- echo -n "Copying $url/$2..."
- if [ -f "$url/$2" ]; then
- cp $url/$2 $3/$file 2> /dev/null
- fi
- if [ -f "$3/$file" ]; then
- echo " done."
- else
- echo " failed."
- fi
-
- else
-
- echo $BASENAME error: invalid protocol $protocol
-
- fi
-
-}
-
-function simplaret_repository {
-
- # return a repository definition from $REPOS_CONF file
- # usage: simplaret_repository [root|repos|noarch|patches]
-
- local definition
-
- if [ -z "$1" ]; then
- definition="ROOT"
- else
- definition="`echo $1 | tr '[:lower:]' '[:upper:]'`"
- fi
-
- if [ "$definition" == "REPOS" ] || [ "$definition" == "PATCHES" ]; then
- definition="$definition-$ARCH-$VERSION"
- elif [ "$definition" == "ROOT" ]; then
- definition="$definition-$ARCH"
- fi
-
- grep -e "^$definition=" $REPOS_CONF | cut -d = -f 2 | sed -e 's/"//g' -e "s/'//g" | cut -d "#" -f 1
-
-}
-
-function simplaret_repository_name {
-
- # return a repository name according the value of $repository
-
- if [ -z "$repository" ]; then
- false
- elif echo $repository | grep -qe %; then
- repository_name="`echo $repository | cut -d % -f 1`"
- if [ -z "$repository_name" ]; then
- echo $BASENAME: you should set a name for the repository $repository
- echo $BASENAME: please correct your $REPOS_CONF
- exit 1
- fi
- else
- echo $BASENAME: you should set a name for the repository $repository
- echo $BASENAME: please correct your $REPOS_CONF
- exit 1
- fi
-
-}
-
-function simplaret_repository_url {
-
- # return a repository url according the value of $repository
-
- if echo $repository | grep -qe %; then
- repository_url="`echo $repository | cut -d % -f 2`"
- if [ -z "$repository_url" ]; then
- echo $BASENAME: you should set a url for the repository $repository
- echo $BASENAME: please correct your $REPOS_CONF
- exit 1
- fi
- else
- echo $BASENAME: you should set a url for the repository $repository
- echo $BASENAME: please correct your $REPOS_CONF
- exit 1
- fi
-
- if [ "$repos_type" == "root" ]; then
- simplaret_distro_folder
- repository_url="$repository_url/$DISTRO_FOLDER/$EXTRA_FOLDER"
- fi
-
-}
-
-function simplaret_set_storage_folder {
-
- storage="$STORAGE/$ARCH/$VERSION/$repos_type"
- if [ "$repos_type" == "noarch" ]; then
- storage="$STORAGE/noarch"
- elif [ "$repos_type" == "patches" ]; then
- storage="$PATCHES_DIR/$ARCH/$VERSION"
- fi
-
-}
-
-function simplaret_update {
-
- local storage
-
- echo Updating package information for arch $ARCH and version $VERSION...
-
- for repos_type in patches root repos noarch; do
-
- simplaret_set_storage_folder
-
- for repository in `simplaret_repository $repos_type`; do
-
- simplaret_repository_name
- simplaret_repository_url
-
- if [ ! -d "$storage/$repository_name" ]; then
- mkdir -p $storage/$repository_name
- else
- simplaret_backup_index $storage/$repository_name
- fi
-
- simplaret_get_index $repository_url $storage/$repository_name
- simplaret_check_index $storage/$repository_name
-
- unset repository_name repository_url repository_protocol
-
- done
- done
-
-}
-
-function simplaret_find_package {
-
- # grep packages in a repository's file list
- # usage: simplaret_find_package <package-name|-all> <repository-folder>
-
- if [ "$1" == "-all" ]; then
- grep -e ".tgz$" $2/`simplaret_filelist` | awk '{ print $8 }'
- else
- grep $1 $2/`simplaret_filelist` | awk '{ print $8 }' | grep -e ".tgz$"
- fi
-
-}
-
-function simplaret_show_package {
-
- # print a package result
- # usage: simplaret_show_package <package-file-name> [--basename-only|--filename-only|--formatted]
-
- if [ "$2" == "--basename-only" ]; then
- echo `basename $1`
- elif [ "$2" == "--filename-only" ]; then
- echo $1
- elif [ "$2" == "--formatted" ]; then
- echo $1,$repos_type,$repository
- else
- if echo $1 | grep -q "/patches/"; then
- patch="(patch)"
- fi
- if [ "$repos_type" == "noarch" ]; then
- echo $name repository $repository_name: `basename $1` $patch
- else
- echo $name repository $repository_name, arch: $ARCH, version: $VERSION: `basename $1` $patch
- fi
- fi
- unset patch
-
-}
-
-function simplaret_filelist {
-
- if [ "$repos_type" == "patches" ]; then
- echo FILE_LIST
- else
- echo FILELIST.TXT
- fi
-
-}
-
-function simplaret_metafiles {
-
- echo `simplaret_filelist` CHECKSUMS.md5
-
-}
-
-function simplaret_search {
-
- # search packages
- # usage: simplaret_search [package-name] [-display_mode]
- # display_mode can be any accepted by simplaret_show_package
-
- local priority priority_match message pattern mode
-
- if [ ! -z "$1" ] && ! echo $1 | grep -q -e "^-"; then
- pattern="$1"
- mode="$2"
- else
- pattern="-all"
- mode="$1"
- fi
-
- for repos_type in patches root repos noarch; do
-
- name="`echo $repos_type | tr '[:lower:]' '[:upper:]'`"
- simplaret_set_storage_folder
-
- for repository in `simplaret_repository $repos_type`; do
-
- simplaret_repository_name
-
- if [ ! -f "$storage/$repository_name/`simplaret_filelist`" ]; then
- if [ "$WARNING" != "0" ] || [ ! -z "$SILENT" ]; then
- if [ "$repos_type" == "noarch" ]; then
- message=""
- else
- message="on arch $ARCH version $VERSION"
- fi
- echo warning: no file list for $repository_name repository $repository_name $message
- echo please do a simplaret --update
- fi
- else
-
- if [ "$repos_type" == "root" ]; then
- # root repositories has ROOT_PRIORITY
- for priority in $ROOT_PRIORITY; do
- for file in `simplaret_find_package $pattern $storage/$repository_name | grep "/$priority/"`; do
- simplaret_show_package $file $mode
- done
- priority_match="$priority_match|/$priority/"
- done
- # now we should return all matches that are not part of ROOT_PRIORITY
- priority_match="`echo $priority_match | sed -e 's/^|//'`"
- for file in `simplaret_find_package $pattern $storage/$repository_name | egrep -v $priority_match`; do
- simplaret_show_package $file $mode
- done
- priority_match=""
- elif [ "$repos_type" == "repos" ]; then
- # repos repositories has REPOS_PRIORITY
- for priority in $REPOS_PRIORITY; do
- for file in `simplaret_find_package $pattern $storage/$repository_name | grep "/$priority/"`; do
- simplaret_show_package $file $mode
- done
- priority_match="$priority_match|/$priority/"
- done
- # now we should return all matches that are not part of REPOS_PRIORITY
- priority_match="`echo $priority_match | sed -e 's/^|//'`"
- for file in `simplaret_find_package $pattern $storage/$repository_name | egrep -v $priority_match`; do
- simplaret_show_package $file $mode
- done
- priority_match=""
- else
- for file in `simplaret_find_package $pattern $storage/$repository_name`; do
- simplaret_show_package $file $mode
- done
- fi
-
- fi
-
- done
- done
-
-}
-
-function simplaret_purge {
-
- # purge simplaret package cache
- # usage: simplaret_purge [-w N]
-
- local mtime mtime_message which and_patches
-
- if [ "$2" == "-w" ] && [ ! -z "$3" ]; then
- mtime="-mtime +`echo "$3*7" | bc -l`"
- mtime_message="older than $3 weeks"
- elif [ "$SIMPLARET_PURGE_WEEKS" != "0" ]; then
- mtime="-mtime +`echo "$SIMPLARET_PURGE_WEEKS*7" | bc -l`"
- mtime_message="older than $SIMPLARET_PURGE_WEEKS weeks"
- else
- mtime=""
- mtime_mesage=""
- fi
-
- which="root repos noarch"
- and_patches=""
-
- if [ "$SIMPLARET_PURGE_PATCHES" == "1" ]; then
- which="patches $which"
- and_patches="including patches"
- fi
-
- if [ -z "$SILENT" ]; then
- echo "$BASENAME: purging all packages $mtime_message for:"
- echo -e "\t- Arch $ARCH and version $VERSION $and_patches"
- echo -e "\t- Noarch folder"
- fi
-
- for repos_type in $which; do
-
- simplaret_set_storage_folder
-
- for file in `find $storage/ $mtime 2> /dev/null`; do
- for extension in tgz asc meta txt slack-required; do
- if echo $file | grep -qe ".$extension$"; then
- rm $file
- fi
- done
- done
-
- done
-
- if [ -z "$SILENT" ]; then
- echo $BASENAME: done purging simplaret cache
- echo $BASENAME: please run $BASENAME --update to retrieve new package listings on this arch and version
- fi
-
-}
-
-function simplaret_search_and_delete {
-
- local file candidate place basename
-
- for file in `find $2/ -name $1*tgz 2> /dev/null`; do
- candidate="`basename $file`"
- if [ "`package_name $candidate`" == "$1" ]; then
- # check if has the same version and build number, otherwise erase the old one
- for result in `simplaret_search $(package_name $candidate) --basename-only`; do
- if [ "`package_name $candidate`" == "`package_name $result`" ]; then
- if [ "`package_version $candidate`" == "`package_version $result`" ] && \
- [ "`package_build $candidate`" == "`package_build $result`" ]; then
- LAST_DOWNLOADED_PACKAGE="$file"
- if [ "$3" != "--silent" ]; then
- echo Package $candidate already downloaded
- # echo Package $candidate stored at `dirname $file`
- else
- true
- # echo $file
- fi
- return 1
- else
- place="`dirname $file`"
- basename="`basename $file tgz`"
- rm -f $file
- rm -f $place/$candidate.slack-required
- rm -f $file.asc $place/$basename.meta $place/$basename.txt
- break
- fi
- fi
- done
- fi
- done
-
-}
-
-function simplaret_get {
-
- # get a package
- # usage: simplaret_get <package-name> [--silent]
-
- local silent generate_patches search search_results
-
- # prevent user to stay in $storage
- cd
-
- # first search for an already downloaded package
- for repos_type in patches root repos noarch; do
-
- simplaret_set_storage_folder
- simplaret_search_and_delete $1 $storage $2
-
- if [ "$?" == "1" ]; then
- return 0
- fi
-
- done
-
- # then search for the package in the repositories
- search="`simplaret_search $1 --formatted`"
- search_results="`echo "$search" | wc -l`"
-
- for result in $search; do
-
- # remaining search results
- let search_results--
-
- file="`echo $result | cut -d , -f 1`"
- repos_type="`echo $result | cut -d , -f 2`"
- repository="`echo $result | cut -d , -f 3`"
-
- simplaret_set_storage_folder
- simplaret_repository_name
-
- candidate="`basename $file`"
- if [ "`package_name $candidate`" == "$1" ]; then
- simplaret_repository_url
-
- # if repos_type == root, the package is a patch and
- # STORE_ROOT_PATCHES_ON_PATCHES_DIR config parameter is enabled, then
- # save it on $PATCHES_DIR/root-$repository_name, so all patches
- # are placed in the same tree
- if [ "$repos_type" == "root" ] && \
- [ "$STORE_ROOT_PATCHES_ON_PATCHES_DIR" == "1" ] && echo $file | grep -q "patches"; then
- folder="$PATCHES_DIR/$ARCH/$VERSION/root-$repository_name"
- generate_patches="1"
- else
- folder="$storage/$repository_name"
- fi
-
- # download the package
- simplaret_download $repository_url $file $folder
-
- if [ -f "$folder/$candidate.asc" ]; then
- rm $folder/$candidate.asc
- fi
-
- if [ -f "$folder/$1.slack-required" ]; then
- rm $folder/$1.slack-required
- fi
-
- # download the signature, if exist
- if simplaret_check_url $repository_url/$file.asc; then
- simplaret_download $repository_url $file.asc $folder
- fi
-
- # download slack-required, if exist
- if simplaret_check_url $repository_url/`dirname $file`/$1.slack-required; then
- simplaret_download $repository_url `dirname $file`/$1.slack-required $folder
- fi
-
- if [ ! -f "$folder/$candidate" ]; then
- LAST_DOWNLOADED_PACKAGE="0"
- if [ "$2" != "--silent" ]; then
- echo Error downloading $candidate from $repos_type repository $repository_url, please check your settings
- fi
- # check if there's also more repositories to try
- if [ "$SIMPLARET_DOWNLOAD_FROM_NEXT_REPO" != "1" ]; then
- return 1
- else
- if [ "$2" != "--silent" ]; then
- echo Trying to fetch $candidate from the next repository...
- fi
- if (($search_results <= 0)); then
- return 1
- fi
- fi
- else
- LAST_DOWNLOADED_PACKAGE="$folder/$candidate"
- if [ "$2" != "--silent" ]; then
- silent=""
- echo Package $candidate stored at $folder
- else
- # echo $folder/$candidate
- silent="--silent"
- fi
- if [ -f "$folder/$candidate.asc" ] || [ "$SIGNATURE_CHECKING" == "1" ]; then
- gpg --verify $folder/$candidate.asc $folder/$candidate
- fi
- # generate the patches FILE_LIST and PACKAGES.TXT if needed
- if [ "$generate_patches" == "1" ]; then
- gen_patches_filelst $folder
- gen_packages_txt $folder
- gen_md5_checksums $folder
- fi
- simplaret_checksum $storage/$repository_name/CHECKSUMS.md5 $folder/$candidate $silent
- return $?
- fi
-
- fi
-
- done
-
-}
-
-function simplaret_search_and_process_patch {
-
- local package_version package_build installed_version
- local installed_build repos_type get is_patch package_match
-
- # get the repository type
- repos_type="`echo $sugested | cut -d , -f 2`"
-
- # get just the file name
- sugested="`echo $sugested | cut -d , -f 1`"
-
- if echo $sugested | grep -q "patches"; then
- is_patch="yes"
- else
- is_patch="no"
- fi
-
- # now split the file name into pieces
- package_version="`package_version $sugested`"
- package_build="`package_build $sugested`"
- sugested="`package_name $sugested`"
-
- # check if the patch was already downloaded
- if echo "$DOWNLOADED_PATCHES" | grep -q " $ARCH:$VERSION:$sugested "; then
- if [ "$IS_UPGRADE" != "1" ]; then
- echo Package $sugested already downloaded
- # echo "Jail $root needs package $sugested (already downloaded, skipping)"
- return
- fi
- fi
-
- # search if its installed in the jail
- installed_packs="`ls /$root/var/log/packages/$sugested* 2> /dev/null`"
- if [ ! -z "$installed_packs" ]; then
-
- for installed in $installed_packs; do
- if [[ "$sugested" == "`package_name $installed.tgz`" ]]; then
- package_installed="1"
- installed_version="`package_version $installed.tgz`"
- installed_build="`package_build $installed.tgz`"
- break
- fi
- done
-
- get="no"
-
- # if the package is installed, download the patch
- if [ "$package_installed" == "1" ]; then
- if [ "$repos_type" == "patches" ]; then
-
- if [ "$package_version" != "$installed_version" ] || [ "$package_build" != "$installed_build" ]; then
- get="yes"
- package_match="no"
- elif [ "$DOWNLOAD_EVEN_APPLIED_PATCHES" == "1" ]; then
- get="yes"
- fi
-
- elif [ "$repos_type" == "root" ] && [ "$is_patch" == "yes" ]; then
-
- if [ "$package_version" != "$installed_version" ] || [ "$package_build" != "$installed_build" ]; then
- get="yes"
- package_match="no"
- elif [ "$DOWNLOAD_EVEN_APPLIED_PATCHES" == "1" ]; then
- get="yes"
- fi
-
- else
- # here, we're dealing with repositories other than ROOT and REPOS,
- # so we need to check if either version or build number are different,
- # otherwise all installed packages would be downloaded
- if [ "$package_version" != "$installed_version" ] || [ "$package_build" != "$installed_build" ]; then
- get="yes"
- package_match="no"
- fi
- fi
- fi
-
- # finally, get the package
- if [ "$get" == "yes" ]; then
- if [ "$IS_UPGRADE" == "1" ]; then
- if [ "$package_match" == "no" ]; then
- simplaret_install $sugested
- else
- simplaret_get $sugested
- fi
- else
- simplaret_get $sugested
- fi
- if [ "$?" == "0" ]; then
- DOWNLOADED_PATCHES="$DOWNLOADED_PATCHES $ARCH:$VERSION:$sugested " # the ending space is important
- fi
- fi
-
- fi
-
- unset package_installed get
-
-}
-
-function simplaret_get_jail_patches {
-
- # get patches from a jail
- # usage: simplaret_get_jail_patches <jail-folder>
-
- local oldarch oldversion
-
- if [ ! -z "$1" ]; then
- root="$1"
- else
- root="/"
- fi
-
- # save current arch and version
- oldarch="$ARCH"
- oldversion="$VERSION"
-
- ARCH="`default_arch $root`"
- VERSION="`default_version $root`"
-
- # in case there's something wrong with the jail, abort
- if [ -z "$VERSION" ] || [ -z "$ARCH" ]; then
- return
- fi
-
- # we need to do that for each arch/version pairs, but just once for each pair
- if ! echo "$DISTRO_UPDATED" | grep -q " $ARCH:$VERSION "; then
- simplaret_update
- DISTRO_UPDATED="$DISTRO_UPDATED $ARCH:$VERSION " # the ending space is important
- echo ""
- fi
-
- echo Fetching patches for arch $ARCH and version $VERSION for jail $root
-
- # list all available patches from PATCHES and ROOT repositories
- for sugested in `simplaret_search --formatted | grep patches | grep -v ",repos," | grep -v ",noarch,"`; do
- simplaret_search_and_process_patch
- done
-
- # grab patches from every other places
- if [ "$CONSIDER_ALL_PACKAGES_AS_PATCHES" == "1" ]; then
-
- for sugested in `simplaret_search --formatted | grep patches | grep ",repos," | grep ",noarch,"`; do
- simplaret_search_and_process_patch
- done
-
- for sugested in `simplaret_search --formatted | grep -v patches`; do
- simplaret_search_and_process_patch
- done
-
- fi
-
- # restore arch and version
- ARCH="$oldarch"
- VERSION="$oldversion"
-
-}
-
-function simplaret_get_patches {
-
- local jailpath
-
- if [ "$1" == "--upgrade" ]; then
- IS_UPGRADE="1"
- fi
-
- if [ ! -z "$ROOT" ]; then
- simplaret_get_jail_patches $ROOT
- return $?
- fi
-
- # first get patches from the root system
- simplaret_get_jail_patches
-
- # then get the needed patches for each installed jail
- if [ -s "$JAIL_LIST" ]; then
- for jailpath in `cat $JAIL_LIST`; do
- if [ -d "$jailpath/var/log/packages" ]; then
- ROOT="$jailpath"
- simplaret_get_jail_patches $jailpath
- fi
- done
- fi
-
- ROOT=""
-
-}
-
-function simplaret_checksum {
-
- # simplaret_checksum <md5file> <file-name> [--silent]
-
- if [ ! -f "$1" ] || [ ! -f "$2" ]; then
- if [ "$3" != "--silent" ]; then
- echo Checksum error: file not found
- fi
- return 1
- fi
-
- pack="`basename $2`"
- checksum="`grep -e "$pack\$" $1 | awk '{ print $1 }'`"
-
- if [ -z "$checksum" ]; then
- echo file $2 not in checksum $1
- return 1
- elif [ "$checksum" != "`md5sum $2 | awk '{ print $1 }'`" ]; then
- if [ "$3" != "--silent" ]; then
- echo Checksum mismatch for file `basename $file`
- fi
- return 1
- else
- if [ "$3" != "--silent" ]; then
- echo Checksum ok for file `basename $file`
- fi
- return 0
- fi
-
-}
-
-function simplaret_install {
-
- # download and install a package
- # usage: simplaret_install <package-name> [--skip-checks]
-
- local package root jail_arch jail_version slack_required dep dependency tmp
-
- root="/$ROOT"
- mkdir -p $root/var/log/setup/tmp
-
- if [ "`echo $1 | sed -e 's/\(..\).*/\1/g'`" == "--" ]; then
- echo $BASENAME: install: syntax error: expected package name
- return 1
- fi
-
- # now we check if ARCH and VERSION from the
- # repository are the same of the jail
- if [ "$2" != "--skip-checks" ]; then
- jail_arch="`default_arch $root`"
- jail_version="`default_version $root`"
- if [ "$ARCH" != "$jail_arch" ]; then
- echo "$BASENAME: requested repository arch ($ARCH) doesn't match jail arch ($jail_arch)"
- echo "$BASENAME: please use \"$BASENAME --get $1 --skip-checks\" to ignore this warning and install anyway"
- return
- elif [ "$VERSION" != "$jail_version" ]; then
- echo "$BASENAME: requested repository version ($VERSION) doesn't match jail version ($jail_version)"
- echo "$BASENAME: please use \"$BASENAME --get $1 --skip-checks\" to ignore this warning and install anyway"
- return 1
- fi
- fi
-
- # package="`simplaret_get $1 --silent`"
- simplaret_get $1 --silent
- package="$LAST_DOWNLOADED_PACKAGE"
-
- if [ "$package" != "0" ] && [ ! -z "$package" ]; then
- slack_required="`dirname $package`/$1.slack-required"
- if [ -f "$package" ]; then
-
- if [ -f "$slack_required" ] && [ "$DEPENDENCY_CHECKING" == "1" ]; then
- # this routine checks for dependencies in package's slack-required
- # procedure adapted from createpkg script
- ( cat $slack_required | while read dep; do
- if [ ! -z "$dep" ]; then
- dependency="`echo $dep | awk '{ print $1 }'`"
- simplaret_solve_dep $1 $dependency $root
- fi
- true
- done )
- fi
-
- ROOT=$root upgradepkg --install-new $package
- LAST_DOWNLOADED_PACKAGE="0"
-
- else
- echo "Error: could not install package $1: file not found"
- LAST_DOWNLOADED_PACKAGE="0"
- return 1
- fi
- else
- echo "Error: could not install package $1"
- LAST_DOWNLOADED_PACKAGE="0"
- return 1
- fi
-
-}
-
-function simplaret_distro_folder {
-
- # first we point to the correct arch
- simplaret_set_arch
-
- # then we set the distro folder
- if [ "$ARCH" == "i386" ]; then
- DISTRO="slackware"
- DISTRO_FOLDER="$DISTRO-$VERSION"
- elif [ "$ARCH" == "x86_64" ]; then
- # EXTRA_FOLDER="tree"
- DISTRO="slamd64"
- DISTRO_FOLDER="$DISTRO-$VERSION"
- elif [ "$ARCH" == "s390" ]; then
- DISTRO="slack390"
- DISTRO_FOLDER="$DISTRO-$VERSION"
- elif [ "$ARCH" == "x86_uclibc" ]; then
- DISTRO="ucslack"
- DISTRO_FOLDER="$DISTRO-$VERSION"
- elif [ "$ARCH" == "arm" ]; then
- DISTRO="armedslack"
- DISTRO_FOLDER="$DISTRO-$VERSION"
- elif [ "$ARCH" == "powerpc" ]; then
- DISTRO="slackintosh"
- DISTRO_FOLDER="$VERSION"
- elif [ "$ARCH" == "sparc" ]; then
- DISTRO="splack"
- DISTRO_FOLDER="tree-$VERSION"
- else
- DISTRO="$ARCH"
- DISTRO_FOLDER="$DISTRO-$VERSION"
- fi
-
-}
-
-function simplaret_set_arch {
-
- # set correct value for ARCH
-
- local repos_type new_arch
-
- # any arch defined in ARCH_i386 that hasn't an entry
- # on $REPOS_CONF will be mapped to i386
-
- ARCH_i386=" nocona prescott pentium4m pentium4 pentium-m pentium3m pentium3 "
- ARCH_i386="$ARCH_i386 pentium2 i686 pentium-pro i586 pentium-mmx pentium i486 "
- ARCH_i386="$ARCH_i386 athlon-mp athlon-xp athlon4 athlon-tbird athlon k6 k6-2 "
- ARCH_i386="$ARCH_i386 k6-3 winchip-c6 winchip2 c3 c3-2 i386 "
-
- # any arch defined in ARCH_x86_64 that hasn't an entry
- # on $REPOS_CONF will be mapped to x86_64
-
- ARCH_x86_64=" k8 opteron athlon64 athlon-fx x86_64 "
-
- for repos_type in patches root repos noarch; do
- if [ -z "`simplaret_repository $repos_type`" ]; then
- # there's no repository definition for that arch
- if echo "$ARCH_i386" | grep -q " $ARCH "; then
- new_arch="i386"
- elif echo "$ARCH_x86_64" | grep -q " $ARCH "; then
- new_arch="x86_64"
- else
- echo "$BASENAME: error: no repository definition for arch $ARCH"
- echo "$BASENAME: please check your $CONF and $REPOS_CONF config files"
- exit 1
- fi
- else
- return
- fi
- done
-
- echo "$BASENAME: changing arch from $ARCH to $new_arch"
-
- ARCH="$new_arch"
-
-}
-
-function simplaret_check_url {
-
- # check if a given url exist, use just with small files
- # usage: simplaret_check_url <url>
-
- if [ -z "$1" ]; then
- return 1
- fi
-
- if [ ! -z "$CONNECT_TIMEOUT" ] || [ "$CONNECT_TIMEOUT" != "0" ]; then
- curl_timeout="--connect-timeout $CONNECT_TIMEOUT"
- fi
-
- if [ "`curl $curl_timeout -I $1 2> /dev/null | head -n 1 | awk '{ print $2 }'`" == "200" ]; then
- # server gave a 200 response, so the url exist
- return 0
- else
- # the url is missing
- return 1
- fi
-
-}
-
-function simplaret_solve_dep {
-
- # solve dependency for a package
- # this function was adapted from createpkg script
- # usage: simplaret_solve_dep <package-name> <package-depencency-name> [root-folder]
-
- local installed check exit_code
-
- local package="$1"
- local pack="$2"
- local root="/$3"
-
- pack="`echo $pack| sed -e 's/\+/\\\+/'`"
- installed=`eval "ls $root/var/log/packages/ | egrep -E '^$pack-[^-]+-[^-]+-[^-]+$'"`
- check=$?
-
- if [ -z "$installed" ]; then
- if [ $check -ne 0 ]; then
- echo "$BASENAME: processing $1 dependency $pack"
- # simplaret_install $pack
- SIMPLARET_CHILD=$SIMPLARET_CHILD ROOT=$root ARCH=$ARCH VERSION=$VERSION \
- simplaret --install $pack
- fi
- fi
-
-}
-
-if [ -z "$1" ]; then
- simplaret_usage
- exit 1
-else
- eval_config $BASENAME
-fi
-
-# This is used to show how many children process we have
-if [ -z "$SIMPLARET_CHILD" ]; then
- SIMPLARET_CHILD="1"
-else
- let SIMPLARET_CHILD++
-fi
-
-BASENAME="`basename $0`[$SIMPLARET_CHILD]"
-
-case $1 in
- "--update" | "update") simplaret_update ;;
- "--search" | "search") shift ; simplaret_search $* ;;
- "--get" | "get") shift ; simplaret_get $* ;;
- "--get-patches" | "get-patches") simplaret_get_patches ;;
- "--purge" | "purge") shift ; simplaret_purge $* ;;
- "--install" | "install") shift ; simplaret_install $* ;;
- "--upgrade" | "upgrade") simplaret_get_patches --upgrade ;;
- "--remove" | "remove") ROOT=/$ROOT removepkg $2 ;;
- *) simplaret_usage ;;
-esac
-
diff --git a/branches/0.6/src/templatepkg b/branches/0.6/src/templatepkg
deleted file mode 100755
index 048ac22..0000000
--- a/branches/0.6/src/templatepkg
+++ /dev/null
@@ -1,959 +0,0 @@
-#!/bin/bash
-#
-# templatepkg v0.3: template maintenance script from simplepkg suite
-#
-# feedback: rhatto at riseup.net | gpl
-#
-# Templatepkg is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# Templatepkg is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-
-COMMON="/usr/libexec/simplepkg/common.sh"
-BASENAME="`basename $0`"
-
-if [ -f "$COMMON" ]; then
- source $COMMON
- eval_config $BASENAME
-else
- echo "error: file $COMMON found, check your $BASENAME installation"
- exit 1
-fi
-
-function usage_summary {
-
- echo "options are:"
- echo ""
- echo " -c | --create: create a template from a jail or existing template"
- echo " -u | --update: update a template from a jail"
- echo " -a | --add: add files into a template"
- echo " -d | --delete: delete files or folders from a template"
- echo " -s | --sync: sync $TEMPLATE_FOLDER working copy"
- echo " -e | --export: export $TEMPLATE_FOLDER to a svn repository"
- echo " -i | --import: grab $TEMPLATE_FOLDER from a svn repository"
- echo " -r | --remove: remove a template"
- echo " -l | --list: list templates"
- echo " -b | --batch-edit: add or edit post-installation scripts"
- echo " -p | --pack: create a package from a template"
- echo " -t | --template-edit: edit template package list"
- echo " -h | --help: display this summary"
- echo ""
-
-}
-
-function display_help {
-
- # display help
- # usage: help [help-topic]
-
- local option
-
- if [ -z "$1" ]; then
- echo "type $BASENAME --help <option> for aditional help"
- usage_summary
- exit
- fi
-
- option="$1"
-
- if ! echo $option | grep -q -e "^-"; then
- option="-`echo $option | sed -e 's/--/-/' -e 's/\(.\).*/\1/'`"
- else
- option="`echo $option | sed -e 's/--/-/' -e 's/\(..\).*/\1/'`"
- fi
-
- usage_summary | grep -e "^ $option"
-
- echo ""
- case $option in
-
- "-c" | "--create")
- echo " $BASENAME $option <template> [jail-root|template-name]"
- ;;
- "-u" | "--update")
- echo " $BASENAME $option <template> [jail-root]"
- ;;
- "-a" | "--add")
- echo " $BASENAME $option <template> <file-name> [jail-root]"
- echo ""
- echo " file-name: the file or directory to be added"
- echo " jail-root: the jail under file-name is located"
- ;;
- "-d" | "--delete")
- echo " $BASENAME $option <template> <file-name>"
- ;;
- "-s" | "--sync")
- echo " $BASENAME $option"
- ;;
- "-e" | "--export")
- echo " $BASENAME $option <svn-repository>"
- ;;
- "-i" | "--import")
- echo " $BASENAME $option <svn-repository>"
- ;;
- "-r" | "--remove")
- echo " $BASENAME $option <template-name>"
- ;;
- "-l" | "--list")
- echo " $BASENAME $option [template-name]"
- ;;
- "-b" | "--batch-edit")
- echo " $BASENAME $option <template-name> <script-name>"
- ;;
- "-p" | "--pack")
- echo " $BASENAME $option <template-name> [version] [build] [arch]"
- ;;
- "-t" | "--template-edit")
- echo " $BASENAME $option <template-name>"
- ;;
- "-h" | "--help")
- echo " -h | --help: display this help."
- ;;
- *)
- echo $BASENAME: invalid help option $option
- esac
-
- case $option in
- "-c" | "-u" | "-a")
- echo ""
- echo " if ommited, jail-root defaults to /"
- ;;
- esac
-
- echo ""
-
-}
-
-function usage {
-
- echo "usage: $BASENAME <option> [<template> [arguments]]"
- usage_summary
- exit
-
-}
-
-function check_svn_repo {
-
- # check a svn repository URL
- # usage: set_svn_repo <repository>
-
- if [ ! -z "$1" ]; then
- if echo $1 | grep -q -v -e "^svn://"; then
- if echo $1 | grep -q -v -e "^svn+ssh://"; then
- if echo $1 | grep -q -v -e "^file://"; then
- echo $BASENAME: invalid repository URL $1
- return 1
- fi
- fi
- fi
- else
- echo $BASENAME: no repository defined
- return 1
- fi
-
-}
-
-function import_export_templates {
-
- # import from or export to $TEMPLATE_FOLDER in a svn repository
- # usage: template_export <import|export> <repository>
-
- local templates templates_folder basedir repository mode preposition
-
- if [ "$?" != 0 ]; then
- usage
- exit 1
- elif ! use_svn; then
- echo $BASENAME: simplepkg not configured to use svn
- exit 1
- fi
-
- templates_folder="$TEMPLATE_FOLDER"
- templates="`basename $TEMPLATE_FOLDER`"
- basedir="`dirname $templates_folder`"
- mode="$1"
- repository="$2"
- preposition="from"
-
- check_svn_repo $repository
-
- if [ ! -z "$2" ]; then
-
- if [ ! -d "$templates_folder/.svn" ]; then
-
- cd $basedir
-
- if [ "$mode" == "export" ]; then
- preposition="to"
- echo Exporting templates to $repository...
- svn import $templates/ $repository/ -m "initial import"
- if [ "$?" != "0" ]; then
- echo $BASENAME: export failed
- exit 1
- fi
- fi
-
- if [ -d "templates" ]; then
- mv $templates $templates.old
- fi
-
- echo Checking out templates from $repository...
- svn checkout $repository $templates
-
- if [ "$?" == "0" ]; then
- rm -rf $templates.old
- else
- rm -rf $templates
- mv $templates.old $templates
- echo $BASENAME: $mode failed
- exit 1
- fi
-
- else
- echo "$BASENAME: $templates_folder seens to be already $mode""ed $preposition $repository"
- exit 1
- fi
-
- fi
-
-}
-
-function template_create {
-
- # create a new template
-
- local template_base info_commit orig_template list
-
- if [ ! -d "`dirname $TEMPLATE_BASE`" ]; then
-
- echo Creating template `basename $TEMPLATE_BASE`...
-
- if use_svn && [ -d "`dirname $TEMPLATE_BASE`/.svn" ]; then
- cd `dirname $TEMPLATE_BASE`
- svn mkdir `dirname $TEMPLATE_BASE`
- else
- mkdir -p `dirname $TEMPLATE_BASE`
- fi
-
- else
- echo $BASENAME: template `basename $TEMPLATE_BASE` already exists
- exit 1
- fi
-
- touch $TEMPLATE_BASE.perms
- touch $TEMPLATE_BASE.template
-
- if use_svn && [ -d "`dirname $TEMPLATE_BASE`/.svn" ]; then
-
- cd `dirname $TEMPLATE_BASE`
-
- if ! svn_check $TEMPLATE_BASE.d; then
- svn mkdir $TEMPLATE_BASE.d
- info_commit="yes"
- else
- mkdir -p $TEMPLATE_BASE.d
- fi
-
- if ! svn_check $TEMPLATE_BASE.s; then
- svn mkdir $TEMPLATE_BASE.s
- info_commit="yes"
- else
- mkdir -p $TEMPLATE_BASE.s
- fi
-
- if ! svn_check $TEMPLATE_BASE.template; then
- svn add $TEMPLATE_BASE.template
- info_commit="yes"
- fi
-
- if ! svn_check $TEMPLATE_BASE.perms; then
- svn add $TEMPLATE_BASE.perms
- info_commit="yes"
- fi
-
- elif use_svn && [ -d "$TEMPLATE_FOLDER/.svn" ]; then
-
- mkdir $TEMPLATE_BASE.{d,s}
- cd $TEMPLATE_FOLDER
- svn add `basename $TEMPLATE_BASE`
- info_commit="yes"
-
- else
- mkdir $TEMPLATE_BASE.{d,s}
- fi
-
- if [ -d "/$ROOT" ]; then
- template_update
- elif [ ! -z "$ROOT" ]; then
-
- # copy from an existing template
-
- if [ -d "$TEMPLATE_FOLDER/$ROOT" ]; then
- orig_template="$TEMPLATE_FOLDER/$ROOT"
- elif [ -d "$BASE_CONF/templates/$ROOT" ]; then
- orig_template="$BASE_CONF/templates/$ROOT"
- elif [ -d "$BASE_CONF/defaults/templates/$ROOT" ]; then
- orig_template="$BASE_CONF/defaults/templates/$ROOT"
- else
- return 1
- fi
-
- if [ -f "$orig_template/$ROOT.perms" ]; then
- cat $orig_template/$ROOT.perms > $TEMPLATE_BASE.perms
- fi
-
- if [ -f "$orig_template/$ROOT.template" ]; then
- cat $orig_template/$ROOT.template > $TEMPLATE_BASE.template
- fi
-
- if use_svn && [ -d "$orig_template/.svn" ]; then
-
- cd `dirname $TEMPLATE_BASE`
-
- list="`ls $orig_template/$ROOT.d/ 2> /dev/null`"
- if [ ! -z "$list" ]; then
- echo Copying files to the new template...
- rsync -av --exclude=.svn $orig_template/$ROOT.d/ $TEMPLATE_BASE.d/
- svn add `basename $TEMPLATE_BASE`.d/*
- info_commit="yes"
- fi
-
- list="`ls $orig_template/$ROOT.s/ 2> /dev/null`"
- if [ ! -z "$list" ]; then
- echo Copying scripts to the new template...
- rsync -av --exclude=.svn $orig_template/$ROOT.s/ $TEMPLATE_BASE.s/
- svn add `basename $TEMPLATE_BASE`.s/*
- info_commit="yes"
- fi
-
- else
-
- list="`ls $orig_template/$ROOT.d/ 2> /dev/null`"
- if [ ! -z "$list" ]; then
- echo Copying files to the new template...
- rsync -av $orig_template/$ROOT.d/ $TEMPLATE_BASE.d/
- fi
-
- list="`ls $orig_template/$ROOT.s/ 2> /dev/null`"
- if [ ! -z "$list" ]; then
- echo Copying scripts to the new template...
- rsync -av $orig_template/$ROOT.s/ $TEMPLATE_BASE.s/
- fi
-
- fi
-
- else
- echo $BASENAME: warning: no root directory defined
- fi
-
- if [ "$info_commit" == "yes" ] && [ -z "$SILENT" ]; then
- echo "$BASENAME: please run 'jail-commit --all' to add files under $file into the svn repository"
- fi
-
-}
-
-function template_update {
-
- # update the template package list
-
- check_template_exist
-
- if [ ! -d "$ROOT/var/log/packages" ]; then
- echo $ROOT/var/log/packages: directory not found
- exit 1
- fi
-
- echo Checking package list for template `basename $TEMPLATE_BASE`...
-
- for package in `ls -1 $ROOT/var/log/packages/`; do
- pack=`package_name $package`
- if [ -f $TEMPLATE ]; then
- if ! `grep -v -e "^#" $TEMPLATE | cut -d : -f 1 | awk '{ print $1 }' | grep -q -e "^$pack\$"`; then
- echo $pack >> $TEMPLATE
- echo Added $pack # on $TEMPLATE
- fi
- else
- echo $pack >> $TEMPLATE
- echo Added $pack # on $TEMPLATE
- fi
- done
-
- # check if each package from the template is installed
- grep -v -e "^#" $TEMPLATE | cut -d : -f 1 | awk '{ print $1 }' | while read pack; do
-
- if [ ! -z "$pack" ]; then
- unset found
- for candidate in `ls $ROOT/var/log/packages/$pack* 2> /dev/null`; do
- candidate="`package_name $candidate`"
- if [ "$pack" == "$candidate" ]; then
- found="1"
- break
- fi
- done
- if [ "$found" != "1" ]; then
- # remove a non-installed package from the template
- sed "/^$pack$/d" $TEMPLATE | sed "/^$pack $/d" | sed "/^$pack:*/d" | sed "/^$pack */d" > $TEMPLATE.tmp
- cat $TEMPLATE.tmp > $TEMPLATE
- rm -f $TEMPLATE.tmp
- echo Removed $pack # from $TEMPLATE
- fi
- fi
-
- done
-
- if ! svn_check $TEMPLATE_BASE.template && [ -d "`dirname $TEMPLATE_BASE`/.svn" ]; then
- cd `dirname $TEMPLATE_BASE`
- svn add `basedir $TEMPLATE_BASE`.template
- fi
-
-}
-
-function template_add {
-
- # add a file in a template
- # usage: template_add <jail-root> <file>
-
- local info_commit cwd
-
- if [ -z "$1" ] || [ -z "$2" ]; then
- return 1
- fi
-
- check_template_exist
-
- jail="/$1"
- file="$2"
-
- if [ -a "$TEMPLATE_BASE.d/$file" ]; then
- if [ -d "$TEMPLATE_BASE.d/$file" ]; then
-
- echo $BASENAME: folder `slash $file` already on $TEMPLATE_BASE.d, checking for contents
-
- cd $jail
- for candidate in `find $file`; do
- if [ ! -a "$TEMPLATE_BASE.d/$candidate" ]; then
- mkdir -p $TEMPLATE_BASE.d/`dirname $candidate`
- cp -a $jail/$candidate $TEMPLATE_BASE.d/$candidate
- if use_svn && [ -d "$TEMPLATE_BASE.d/.svn" ]; then
- cwd="`pwd`"
- cd $TEMPLATE_BASE.d
- svn add ./$candidate
- if [ "$?" != "0" ]; then
- echo $BASENAME: error adding `slash $candidate` into the revision system
- fi
- cd $cwd
- info_commit="yes"
- else
- echo Added `slash $jail/$candidate` on `slash $TEMPLATE_BASE.d/$candidate`
- fi
- fi
- done
-
- if [ "$info_commit" == "yes" ] && [ -z "$SILENT" ]; then
- echo "$BASENAME: please run 'jail-commit --all' to add files under `slash $file` into the svn repository"
- fi
-
- else
- echo $BASENAME: file `slash $file` already on $TEMPLATE_BASE.d
- exit 1
- fi
- else
-
- if [ -a "$jail/$file" ]; then
-
- destination="`echo $TEMPLATE_BASE.d/$file | sed -e 's/\/$//'`"
-
- if use_svn && [ -d "$TEMPLATE_BASE.d/.svn" ]; then
-
- if [ ! -d "$TEMPLATE_BASE.d/`dirname $file`/.svn" ]; then
- mkdir -p $TEMPLATE_BASE.d/`dirname $file`/
- svn add $TEMPLATE_BASE.d/`dirname $file`/
- fi
-
- cp -a $jail/$file $destination
-
- cwd="`pwd`"
- cd $TEMPLATE_BASE.d
- svn add ./$file
-
- if [ "$?" != "0" ]; then
- echo $BASENAME: error adding `slash $candidate` into the revision system
- else
- if [ -z "$SILENT" ]; then
- echo "$BASENAME: please run 'jail-commit --all' to add `slash $file` into the svn repository"
- fi
- fi
-
- cd $cwd
-
- else
-
- mkdir -p $TEMPLATE_BASE.d/`dirname $file`/
- cp -a $jail/$file $destination
- echo Added `slash $jail/$file` on `slash $destination`
-
- fi
-
- else
- echo $BASENAME: `slash $jail/$file`: file not found
- exit 1
- fi
- fi
-
-}
-
-function check_template_exist {
-
- # check if a template exists
- # and create missing components
-
- local components
-
- components="template perms d s"
-
- if [ ! -d "`dirname $TEMPLATE_BASE`" ]; then
- echo $BASENAME: template not found
- exit 1
- fi
-
- for component in $components; do
-
- if [ ! -e "$TEMPLATE_BASE.$component" ]; then
-
- echo "$BASENAME: template component not found: $TEMPLATE_BASE.$component; creating..."
-
- cd `dirname $TEMPLATE_BASE`
-
- if [ "$component" == "perms" ] || [ "$component" == "template" ]; then
- touch $TEMPLATE_BASE.$component
- else
- mkdir $TEMPLATE_BASE.$component
- fi
-
- if use_svn && [ -d "`dirname $TEMPLATE_BASE`/.svn" ]; then
- svn add $TEMPLATE_BASE.$component
- info_commit="yes"
- fi
-
- elif use_svn && [ -d "`dirname $TEMPLATE_BASE`/.svn" ] && \
- ! svn_check $TEMPLATE_BASE.$component; then
-
- cd `dirname $TEMPLATE_BASE`
- svn add $TEMPLATE_BASE.$component
- info_commit="yes"
-
- fi
-
- done
-
- if [ "$info_commit" == "yes" ] && [ -z "$SILENT" ]; then
- echo "$BASENAME: please run 'jail-commit --all' to add new files in the svn repository"
- fi
-
-}
-
-function template_delete {
-
- # delete a file from a template
- # usage: template_delete <file>
-
- if [ -e "$TEMPLATE_BASE.d/$1" ]; then
- if use_svn && [ -d "$TEMPLATE_BASE.d/.svn" ]; then
- cd $TEMPLATE_BASE.d
- svn del --force ./$1 || rm -rf ./$1
- if [ -z "$SILENT" ]; then
- echo "$BASENAME: please run 'jail-commit --all' to del $1 in the svn repository"
- fi
- else
- rm -rf $TEMPLATE_BASE.d/$1
- echo Removed $1 from $TEMPLATE_BASE.d
- fi
- elif [ -e "$TEMPLATE_BASE.s/$1" ]; then
- if use_svn && [ -d "$TEMPLATE_BASE.s/.svn" ]; then
- cd $TEMPLATE_BASE.s
- svn del --force ./$1 || rm -rf ./$1
- if [ -z "$SILENT" ]; then
- echo "$BASENAME: please run 'jail-commit --all' to del $1 in the svn repository"
- fi
- else
- rm -rf $TEMPLATE_BASE.s/$1
- echo Removed $1 from $TEMPLATE_BASE.s
- fi
- else
- if [ ! -d "$TEMPLATE_BASE.d" ]; then
- echo $BASENAME: template folder $TEMPLATE_BASE.d not found
- else
- echo $BASENAME: file $1 not found at $TEMPLATE_BASE.d
- fi
- exit 1
- fi
-
-}
-
-function template_remove {
-
- # remove a template
- # usage: template_remove
-
- local basedir template
-
- basedir="`dirname $TEMPLATE_BASE`"
- template="`basename $basedir`"
-
- if [ ! -d "$basedir" ]; then
- echo $BASENAME: template $template does not exist
- exit 1
- fi
-
- if use_svn && [ -d "$basedir/.svn" ]; then
- cd $TEMPLATE_FOLDER
- svn update
- svn del --force $template
- if [ "$?" != "0" ]; then
- echo $BASENAME: error deleting template $template
- else
- svn commit -m "deleted $template"
- if [ "$?" != "0" ]; then
- echo $BASENAME: error commiting to svn repository
- fi
- fi
- else
- rm -rf $basedir
- fi
-
-}
-
-function template_list {
-
- # list templates
- # usage: template_list [template_name]
-
- local list basedir template
-
- if [ "$TEMPLATE_STORAGE_STYLE" != "own-folder" ]; then
- echo "$BASENAME: option only available if TEMPLATE_STORAGE_STYLE configured as 'own-folder'"
- return 1
- fi
-
- if echo $1 | grep -q "/" || [ ! -z "$1" ]; then
-
- template="`echo $1 | cut -d "/" -f 1`"
-
- if [ -e "$BASE_CONF/defaults/templates/$1" ]; then
- list="`ls $BASE_CONF/defaults/templates/$1 2> /dev/null`"
- if [ "$?" == "0" ]; then
- list="`echo $list | xargs`"
- echo "In the default template $template: $list"
- fi
- fi
-
- if [ -e "$TEMPLATE_FOLDER/$1" ]; then
- list="`ls $TEMPLATE_FOLDER/$1 2> /dev/null`"
- if [ "$?" == "0" ]; then
- list="`echo $list | xargs`"
- echo "In the custom template $template: $list"
- fi
- fi
-
- else
-
- list="`ls $BASE_CONF/defaults/templates/$1 2> /dev/null`"
- if [ "$?" == "0" ]; then
- list="`echo $list | xargs`"
- echo "Default templates: $list"
- fi
-
- list="`ls $TEMPLATE_FOLDER/$1 2> /dev/null`"
- if [ "$?" == "0" ]; then
- list="`echo $list | xargs`"
- echo "Custom templates: $list"
- fi
-
- fi
-
-}
-
-function template_post_install_edit {
-
- # add or edit a post-installation script
- # usage: template_post_install_edit <script-name>
-
- if [ -z "$1" ]; then
- echo $BASENAME: no template specified
- exit 1
- elif echo $1 | grep -q "/"; then
- echo $BASENAME: error: invalid script name $1
- fi
-
- if [ -f "$TEMPLATE_BASE.s/$1" ]; then
- sha1sum="`sha1sum $TEMPLATE_BASE.s/$1`"
- if [ ! -z "$EDITOR" ]; then
- $EDITOR $TEMPLATE_BASE.s/$1
- else
- vi $TEMPLATE_BASE.s/$1
- fi
- if [ "$sha1sum" != "`sha1sum $TEMPLATE_BASE.s/$1`" ] && \
- [ -d "`dirname $TEMPLATE_BASE`/.svn" ] && [ -z "$SILENT" ]; then
- echo "$BASENAME: please run 'jail-commit --all' to send changes to the repository"
- fi
- else
-
- if [ -e "$TEMPLATE_BASE.s/$1" ]; then
-
- echo $BASENAME: file $TEMPLATE_BASE.s/$1 not a regular file
-
- elif [ -d "$TEMPLATE_BASE.s" ]; then
-
- touch $TEMPLATE_BASE.s/$1
- chmod +x $TEMPLATE_BASE.s/$1
-
- if [ -d "$TEMPLATE_BASE.s/.svn" ]; then
- cd $TEMPLATE_BASE.s
- svn add $1
- if [ -z "$SILENT" ]; then
- echo "$BASENAME: please run 'jail-commit --all' to send the script to the repository"
- fi
- fi
-
- echo "$BASENAME: script created; run templatepkg -p `basename $TEMPLATE_BASE` $1 again to edit it"
-
- else
- echo $BASENAME: folder not found: $TEMPLATE_BASE.s
- fi
-
- fi
-
-}
-
-function template_edit {
-
- # edit a template package list
- # usage: template_edit
-
- if [ -f "$TEMPLATE_BASE.template" ]; then
- sha1sum="`sha1sum $TEMPLATE_BASE.template`"
- if [ ! -z "$EDITOR" ]; then
- $EDITOR $TEMPLATE_BASE.template
- else
- vi $TEMPLATE_BASE.template
- fi
- if [ "$sha1sum" != "`sha1sum $TEMPLATE_BASE.template`" ] && \
- [ -d "`dirname $TEMPLATE_BASE`/.svn" ] && [ -z "$SILENT" ]; then
- echo "$BASENAME: please run 'jail-commit --all' to send changes to the repository"
- fi
- elif [ -e "$TEMPLATE_BASE.template" ]; then
- echo $BASENAME: file $TEMPLATE_BASE.template not a regular file
- else
- echo $BASENAME: file not found: $TEMPLATE_BASE.template
- fi
-
-}
-
-function require {
-
- # requires a string
- # usage: require [string]
-
- if [ -z "$1" ]; then
- usage
- fi
-
-}
-
-function setroot {
-
- # set ROOT variable
- # usage: setroot <value1> <value2>
-
- if [ -z "$1" ]; then
- ROOT="/"
- else
- ROOT="$1"
- fi
-
-}
-
-function create_doinst {
-
- # create a doinst.sh from a template.perms file
- # usage: create_doinst <doinst-path>
-
- rm -f $1/doinst.sh
-
- if [ -s "$TEMPLATE_BASE.perms" ]; then
- echo Creating doinst.sh...
- cat $TEMPLATE_BASE.perms | while read entry; do
- file="`echo $entry | cut -d ";" -f 1`"
- if [ -e "$TEMPLATE_BASE.d/$file" ]; then
- owner="`echo $entry | cut -d ";" -f 2`"
- group="`echo $entry | cut -d ";" -f 3`"
- perms="`echo $entry | cut -d ";" -f 4`"
- echo "( chmod $perms /$file )" >> $1/doinst.sh
- echo "( chown $owner:$group /$file )" >> $1/doinst.sh
- fi
- done
- fi
-
-}
-
-function package_template {
-
- # make a package from a template
- # usage: package_template [version] [build] [arch]
-
- local template version build arch
-
- template="`basename $TEMPLATE_BASE`"
-
- if [ ! -d "$TEMPLATE_BASE.d" ]; then
- $BASENAME: folder not found: $TEMPLATE.base.d
- return 1
- fi
-
- echo Buiding package for template $template...
-
- if [ -z "$1" ]; then
- version="1"
- else
- version="$1"
- fi
-
- if [ -z "$2" ]; then
- build="1"
- else
- build="$2"
- fi
-
- if [ -z "$3" ]; then
- arch="noarch"
- else
- arch="$3"
- fi
-
- TMP=${TMP:=/tmp}
- rm -rf $TMP/templatepkg
- mkdir -p $TMP/templatepkg
-
- rsync -av --exclude=.svn $TEMPLATE_BASE.d/ $TMP/templatepkg/
- mkdir $TMP/templatepkg/install
- create_doinst $TMP/templatepkg/install
-
- echo "template-$template: template-$template" > $TMP/templatepkg/install/slack-desc
- echo "template-$template: " >> $TMP/templatepkg/install/slack-desc
- echo "template-$template: simplepkg template $template" >> $TMP/templatepkg/install/slack-desc
-
- for ((n=1;n<=8;n++)); do
- echo "template-$template: " >> $TMP/templatepkg/install/slack-desc
- done
-
- cd $TMP/templatepkg
-
- makepkg -c n -l y $TMP/template-$template-$version-noarch-$build.tgz
-
- cd $TMP
- rm -rf templatepkg
-
-}
-
-# -----------------------------------------------------
-# main
-# -----------------------------------------------------
-
-if [ ! -z "$2" ]; then
- search_template $2 --new
-fi
-
-TEMPLATE="$TEMPLATE_BASE.template"
-
-if [ "$1" == "-u" ] || [ "$1" == "--update" ]; then
-
- require $2
- setroot $3
- template_update
-
-elif [ "$1" == "-c" ] || [ "$1" == "--create" ]; then
-
- require $2
- setroot $3
- template_create
-
-elif [ "$1" == "-a" ] || [ "$1" == "--add" ]; then
-
- require $2
-
- if [ -z "$3" ]; then
- usage
- else
- setroot $4
- fi
-
- template_add $ROOT $3
-
-elif [ "$1" == "-d" ] || [ "$1" == "--delete" ]; then
-
- require $2
-
- if [ -z "$3" ]; then
- usage
- else
- template_delete $3
- fi
-
-elif [ "$1" == "-s" ] || [ "$1" == "--sync" ]; then
-
- if use_svn && [ -d "$TEMPLATE_FOLDER/.svn" ]; then
- ( cd $TEMPLATE_FOLDER && svn update )
- true
- fi
-
-elif [ "$1" == "-e" ] || [ "$1" == "--export" ]; then
-
- require $2
- import_export_templates export $2
-
-elif [ "$1" == "-i" ] || [ "$1" == "--import" ]; then
-
- require $2
- import_export_templates import $2
-
-elif [ "$1" == "-r" ] || [ "$1" == "--remove" ]; then
-
- require $2
- template_remove
-
-elif [ "$1" == "-l" ] || [ "$1" == "--list" ]; then
-
- template_list $2
-
-elif [ "$1" == "-b" ] || [ "$1" == "--batch-edit" ]; then
-
- require $3
- template_post_install_edit $3
-
-elif [ "$1" == "-t" ] || [ "$1" == "--template-edit" ]; then
-
- require $2
- template_edit
-
-elif [ "$1" == "-p" ] || [ "$1" == "--pack" ]; then
-
- require $2
- shift ; shift
- package_template $*
-
-elif [ "$1" == "-h" ] || [ "$1" == "--help" ]; then
-
- display_help $2
-
-else
- usage
-fi
-
diff --git a/branches/0.6/templates/openoffice/openoffice.d/etc/profile.d/lang.csh b/branches/0.6/templates/openoffice/openoffice.d/etc/profile.d/lang.csh
deleted file mode 100755
index 94e8a92..0000000
--- a/branches/0.6/templates/openoffice/openoffice.d/etc/profile.d/lang.csh
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/csh
-# Set the system locale. (no, we don't have a menu for this ;-)
-# For a list of locales which are supported by this machine, type:
-# locale -a
-
-# en_US is the Slackware default locale:
-setenv LANG pt_BR
-
-# 'C' is the old Slackware (and UNIX) default, which is 127-bit
-# ASCII with a charmap setting of ANSI_X3.4-1968. These days,
-# it's better to use en_US or another modern $LANG setting to
-# support extended character sets.
-#setenv LANG C
-
-# There is also support for UTF-8 locales, but be aware that
-# some programs are not yet able to handle UTF-8 and will fail to
-# run properly. In those cases, you can set LANG=C before
-# starting them. Still, I'd avoid UTF unless you actually need it.
-#setenv LANG en_US.UTF-8
-
-# Another option for en_US:
-#setenv LANG en_US.ISO8859-1
-
-# One side effect of the newer locales is that the sort order
-# is no longer according to ASCII values, so the sort order will
-# change in many places. Since this isn't usually expected and
-# can break scripts, we'll stick with traditional ASCII sorting.
-# If you'd prefer the sort algorithm that goes with your $LANG
-# setting, comment this out.
-setenv LC_COLLATE C
-
-# End of /etc/profile.d/lang.csh
-
diff --git a/branches/0.6/templates/openoffice/openoffice.d/etc/profile.d/lang.sh b/branches/0.6/templates/openoffice/openoffice.d/etc/profile.d/lang.sh
deleted file mode 100755
index c9cde20..0000000
--- a/branches/0.6/templates/openoffice/openoffice.d/etc/profile.d/lang.sh
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/sh
-# Set the system locale. (no, we don't have a menu for this ;-)
-# For a list of locales which are supported by this machine, type:
-# locale -a
-
-# en_US is the Slackware default locale:
-export LANG=pt_BR
-
-# 'C' is the old Slackware (and UNIX) default, which is 127-bit
-# ASCII with a charmap setting of ANSI_X3.4-1968. These days,
-# it's better to use en_US or another modern $LANG setting to
-# support extended character sets.
-#export LANG=C
-
-# There is also support for UTF-8 locales, but be aware that
-# some programs are not yet able to handle UTF-8 and will fail to
-# run properly. In those cases, you can set LANG=C before
-# starting them. Still, I'd avoid UTF unless you actually need it.
-#export LANG=en_US.UTF-8
-
-# Another option for en_US:
-#export LANG=en_US.ISO8859-1
-
-# One side effect of the newer locales is that the sort order
-# is no longer according to ASCII values, so the sort order will
-# change in many places. Since this isn't usually expected and
-# can break scripts, we'll stick with traditional ASCII sorting.
-# If you'd prefer the sort algorithm that goes with your $LANG
-# setting, comment this out.
-export LC_COLLATE=C
-
-# End of /etc/profile.d/lang.sh
-
diff --git a/branches/0.6/templates/openoffice/openoffice.d/opt/OpenOffice.org b/branches/0.6/templates/openoffice/openoffice.d/opt/OpenOffice.org
deleted file mode 120000
index 7146afd..0000000
--- a/branches/0.6/templates/openoffice/openoffice.d/opt/OpenOffice.org
+++ /dev/null
@@ -1 +0,0 @@
-../opt2/OpenOffice.org \ No newline at end of file
diff --git a/branches/0.6/templates/openoffice/openoffice.perms b/branches/0.6/templates/openoffice/openoffice.perms
deleted file mode 100644
index e69de29..0000000
--- a/branches/0.6/templates/openoffice/openoffice.perms
+++ /dev/null
diff --git a/branches/0.6/templates/openoffice/openoffice.s/post-install.sh b/branches/0.6/templates/openoffice/openoffice.s/post-install.sh
deleted file mode 100755
index 086c7a4..0000000
--- a/branches/0.6/templates/openoffice/openoffice.s/post-install.sh
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/bash
-
-if [ -z "$2" ]; then
- echo "usage: `basename $0` <jail-root> <jail-name>"
- exit 1
-elif [ ! -d "$1/$2" ]; then
- echo "folder $1/$2 does not exist"
- exit 1
-fi
-
-echo running post-installation script for $1/$2 jail...
-
-# copia de arquivos
-cp -p /etc/passwd $1/$2/etc/
-cp -p /etc/group $1/$2/etc/
-cp /etc/localtime $1/$2/etc/
-
-# pos-instalacao
-mount -t proc proc $1/$2/proc
-chroot $1/$2 /sbin/ldconfig
-cd $1/$2 && exec ./var/log/scripts/glibc-zoneinfo-*
-umount $1/$2/proc
diff --git a/branches/0.6/templates/openoffice/openoffice.template b/branches/0.6/templates/openoffice/openoffice.template
deleted file mode 100644
index ef3ae52..0000000
--- a/branches/0.6/templates/openoffice/openoffice.template
+++ /dev/null
@@ -1,60 +0,0 @@
-aaa_base: ADD
-aaa_elflibs: ADD
-acpid: REC
-bash: ADD
-bin: ADD
-bzip2: ADD
-coreutils: ADD
-cups: REC
-cxxlibs: ADD
-devs: ADD
-etc: ADD
-a2ps
-bc
-enscript
-espgs
-etc
-findutils
-gawk
-gettext
-getty-ps
-gimp-print
-glibc
-glibc-i18n
-glibc-profile
-glibc-solibs
-glibc-zoneinfo
-grep
-gzip
-hpijs
-infozip
-ispell
-kbd
-kde-i18n-pt_BR
-kdebase
-kdelibs
-koffice-i18n-pt_BR
-less
-libart_lgpl
-libidn
-libmng
-pkgtools
-qt
-sed
-shadow
-sudo
-sysklogd
-sysvinit
-utempter
-util-linux
-x11
-x11-devel
-x11-fonts-100dpi
-x11-fonts-cyrillic
-x11-fonts-misc
-x11-fonts-scale
-x11-xdmx
-x11-xnest
-x11-xvfb
-openoffice-chroot
-openssl
diff --git a/branches/0.6/templates/slackware/slackware.perms b/branches/0.6/templates/slackware/slackware.perms
deleted file mode 100644
index e69de29..0000000
--- a/branches/0.6/templates/slackware/slackware.perms
+++ /dev/null
diff --git a/branches/0.6/templates/slackware/slackware.template b/branches/0.6/templates/slackware/slackware.template
deleted file mode 100644
index c3590c1..0000000
--- a/branches/0.6/templates/slackware/slackware.template
+++ /dev/null
@@ -1,566 +0,0 @@
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: A1 (Base Linux series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-#
-#
-aaa_base: ADD
-aaa_elflibs: ADD
-acpid: REC
-apmd: REC
-bash: ADD
-bin: ADD
-bzip2: ADD
-coreutils: ADD
-cpio: ADD
-cups: REC
-cxxlibs: ADD
-dcron: ADD
-devs: ADD
-e2fsprogs: ADD
-elvis: ADD
-etc: ADD
-findutils: ADD
-floppy: ADD
-gawk: ADD
-genpower: OPT
-gettext: REC
-getty-ps: OPT
-glibc-solibs: ADD
-glibc-zoneinfo: ADD
-gpm: REC
-grep: ADD
-gzip: ADD
-hdparm: ADD
-hotplug: ADD
-infozip: ADD
-isapnptools: OPT
-jfsutils: OPT
-kbd: REC
-kernel-ide: REC
-kernel-modules: ADD
-less: ADD
-lilo: ADD
-loadlin: REC
-logrotate: ADD
-minicom: REC
-mkinitrd: REC
-module-init-tools: ADD
-openssl-solibs: ADD
-pciutils: OPT
-pcmcia-cs: REC
-pkgtools: ADD
-procps: ADD
-reiserfsprogs: ADD
-sed: ADD
-shadow: ADD
-slocate: ADD
-smartmontools: ADD
-sysklogd: ADD
-syslinux: ADD
-sysvinit: ADD
-tar: ADD
-tcsh: REC
-udev: ADD
-umsdos-progs: ADD
-usbutils: ADD
-utempter: REC
-util-linux: ADD
-xfsprogs: OPT
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: AP1 (Applications series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-#
-#
-a2ps: REC
-acct: OPT
-alsa-utils: REC
-amp: OPT
-ash: OPT
-at: OPT
-aumix: OPT
-bc: OPT
-bpe: OPT
-cdparanoia: OPT
-cdrdao: OPT
-cdrtools: OPT
-diffutils: REC
-dvd+rw-tools: OPT
-enscript: OPT
-espgs: REC
-flac: OPT
-gimp-print: OPT
-groff: ADD
-gnu-gs-fonts: REC
-hpijs: REC
-ispell: OPT
-jed: OPT
-joe: OPT
-jove: OPT
-ksh93: OPT
-lsof: OPT
-lvm: OPT
-madplay: OPT
-man: ADD
-man-pages: REC
-mc: OPT
-mdadm: OPT
-most: OPT
-mpg321: OPT
-mt-st: OPT
-mysql: OPT
-normalize: OPT
-quota: OPT
-raidtools: OPT
-rexima: REC
-rpm: OPT
-rzip: OPT
-sc: OPT
-screen: OPT
-seejpeg: REC
-sgml-tools: REC
-sox: REC
-sudo: OPT
-texinfo: REC
-vim: OPT
-vorbis-tools: OPT
-workbone: OPT
-zsh: OPT
-
-autoconf: OPT
-automake: OPT
-bin86: ADD
-binutils: ADD
-bison: ADD
-byacc: OPT
-ccache: OPT
-clisp: OPT
-cscope: OPT
-cvs: REC
-distcc: OPT
-doxygen: OPT
-flex: ADD
-gcc: ADD
-gcc-g++: REC
-gcc-g77: OPT
-gcc-gnat: OPT
-gcc-java: OPT
-gcc-objc: OPT
-gdb: REC
-gettext-tools: REC
-guile: OPT
-indent: OPT
-kernel-headers: ADD
-libtool: OPT
-m4: REC
-make: ADD
-nasm: OPT
-oprofile: OPT
-p2c: OPT
-perl: REC
-pkgconfig: REC
-pmake: REC
-python: OPT
-python-demo: OPT
-python-tools: OPT
-rcs: OPT
-strace: REC
-subversion: OPT
-# Tagfile for emacs series
-emacs: ADD
-emacs-misc: REC
-emacs-lisp: OPT
-emacs-leim: OPT
-emacs-nox: OPT
-emacs-info: REC
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: F1 (Frequently Asked Questions)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-#
-#
-linux-faqs: ADD
-linux-howtos: ADD
-kernel-source: REC
-aalib: REC
-alsa-driver: ADD
-alsa-lib: ADD
-alsa-oss: OPT
-arts: ADD
-aspell: REC
-aspell-en: REC
-atk: REC
-audiofile: REC
-db3: REC
-db31: REC
-db4: REC
-esound: REC
-expat: REC
-fribidi: REC
-gdbm: REC
-gdk-pixbuf: REC
-glib: REC
-glib2: REC
-glibc: REC
-glibc-i18n: OPT
-glibc-profile: OPT
-glut: REC
-gmp: REC
-gnet: REC
-gtk+: REC
-gtk+2: REC
-imlib: REC
-jre: OPT
-lcms: REC
-lesstif: REC
-libao: REC
-libart_lgpl: REC
-libcaca: OPT
-libexif: REC
-libglade: REC
-libgsf: REC
-libgtkhtml: REC
-libid3tag: REC
-libidl: REC
-libidn: REC
-libieee1284: REC
-libjpeg: REC
-libmad: REC
-libmikmod: REC
-libmng: REC
-libogg: REC
-libpng: REC
-librsvg: REC
-libtermcap: REC
-libtiff: REC
-libungif: REC
-libusb: REC
-libvorbis: REC
-libwmf: REC
-libwmf-docs: OPT
-libwpd: REC
-libxml2: REC
-libxslt: REC
-mhash: REC
-mpeg_lib: OPT
-ncurses: REC
-netpbm: REC
-pango: REC
-pcre: REC
-pilot-link: REC
-popt: REC
-readline: REC
-sdl: REC
-shared-mime-info: REC
-slang: REC
-startup-notification: ADD
-svgalib: REC
-t1lib: REC
-taglib: REC
-wv2: REC
-xaw3d: REC
-zlib: REC
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from the N (Network/UUCP/Mail/News) series.
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-#
-apache: OPT
-autofs: OPT
-bind: REC
-bitchx: OPT
-bootp: OPT
-curl: OPT
-cyrus-sasl: REC
-dhcp: OPT
-dhcpcd: REC
-dnsmasq: OPT
-elm: OPT
-epic4: OPT
-fetchmail: OPT
-getmail: REC
-gnupg: OPT
-htdig: OPT
-imapd: OPT
-inetd: REC
-iproute2: OPT
-iptables: ADD
-iptraf: OPT
-irssi: OPT
-lftp: OPT
-links: OPT
-lynx: OPT
-metamail: REC
-mod_ssl: OPT
-mutt: OPT
-nail: REC
-nc: OPT
-ncftp: OPT
-netatalk: OPT
-netpipes: OPT
-netwatch: OPT
-newspost: OPT
-nfs-utils: OPT
-nmap: OPT
-nn: OPT
-ntp: OPT
-openssh: REC
-openssl: REC
-php: OPT
-pidentd: REC
-pine: OPT
-popa3d: REC
-portmap: REC
-ppp: OPT
-procmail: REC
-proftpd: OPT
-rdist: OPT
-rp-pppoe: OPT
-rsync: OPT
-samba: OPT
-sendmail-cf: OPT
-sendmail: REC
-slrn: OPT
-stunnel: OPT
-tcpdump: REC
-tcpip: REC
-tin: OPT
-traceroute: OPT
-trn: OPT
-uucp: OPT
-vsftpd: REC
-wget: OPT
-whois: OPT
-wireless-tools: OPT
-yptools: OPT
-ytalk: OPT
-tetex: ADD
-tetex-doc: REC
-xfig: OPT
-transfig: OPT
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: TCL1 (Tcl/Tk series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-#
-#
-expect: OPT
-hfsutils: OPT
-tcl: ADD
-tk: REC
-tclx: REC
-tix: OPT
-x11: ADD
-x11-devel: ADD
-x11-docs: REC
-x11-docs-html: OPT
-x11-fonts-100dpi: OPT
-x11-fonts-cyrillic: OPT
-x11-fonts-misc: ADD
-x11-fonts-scale: ADD
-x11-xdmx: OPT
-x11-xnest: OPT
-x11-xvfb: OPT
-abiword: OPT
-blackbox: OPT
-fluxbox: OPT
-fvwm: REC
-gaim: OPT
-gftp: OPT
-gimp: REC
-gimp-help-2: REC
-gkrellm: OPT
-gnuchess: REC
-gnuplot: OPT
-gucharmap: OPT
-gv: REC
-gxine: OPT
-imagemagick: REC
-mozilla: REC
-mozilla-firefox: REC
-mozilla-thunderbird: REC
-pan: REC
-rxvt: REC
-sane: OPT
-seyon: OPT
-windowmaker: REC
-x3270: OPT
-xchat: OPT
-xfce: OPT
-xfm: OPT
-xfractint: OPT
-xgames: REC
-xine-lib: REC
-xine-ui: REC
-xpaint: OPT
-xpdf: OPT
-xmms: OPT
-xsane: OPT
-xlockmore: REC
-xscreensaver: REC
-xv: REC
-xvim: REC
-xxgdb: REC
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: Y1 (Yaaaaaahhoooo? Games and Amusements).
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-bsd-games: OPT
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/apache/httpd.conf b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/apache/httpd.conf
deleted file mode 100644
index 7b7115d..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/apache/httpd.conf
+++ /dev/null
@@ -1,1046 +0,0 @@
-##
-## httpd.conf -- Apache HTTP server configuration file
-##
-
-#
-# Based upon the NCSA server configuration files originally by Rob McCool.
-#
-# This is the main Apache server configuration file. It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs/> for detailed information about
-# the directives.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do. They're here only as hints or reminders. If you are unsure
-# consult the online docs. You have been warned.
-#
-# After this file is processed, the server will look for and process
-# /etc/apache/srm.conf and then /etc/apache/access.conf
-# unless you have overridden these with ResourceConfig and/or
-# AccessConfig directives here.
-#
-# The configuration directives are grouped into three basic sections:
-# 1. Directives that control the operation of the Apache server process as a
-# whole (the 'global environment').
-# 2. Directives that define the parameters of the 'main' or 'default' server,
-# which responds to requests that aren't handled by a virtual host.
-# These directives also provide default values for the settings
-# of all virtual hosts.
-# 3. Settings for virtual hosts, which allow Web requests to be sent to
-# different IP addresses or hostnames and have them handled by the
-# same Apache server process.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path. If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
-# with ServerRoot set to "/usr/local/apache" will be interpreted by the
-# server as "/usr/local/apache/logs/foo.log".
-#
-
-### Section 1: Global Environment
-#
-# The directives in this section affect the overall operation of Apache,
-# such as the number of concurrent requests it can handle or where it
-# can find its configuration files.
-#
-
-#
-# ServerType is either inetd, or standalone. Inetd mode is only supported on
-# Unix platforms.
-#
-ServerType standalone
-
-# ServerTokens directive
-ServerTokens ProductOnly
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# NOTE! If you intend to place this on an NFS (or otherwise network)
-# mounted filesystem then please read the LockFile documentation
-# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
-# you will save yourself a lot of trouble.
-#
-ServerRoot "/usr"
-
-#
-# The LockFile directive sets the path to the lockfile used when Apache
-# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
-# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
-# its default value. The main reason for changing it is if the logs
-# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
-# DISK. The PID of the main server process is automatically appended to
-# the filename.
-#
-#LockFile /var/run/httpd.lock
-
-#
-# PidFile: The file in which the server should record its process
-# identification number when it starts.
-#
-PidFile /var/run/httpd.pid
-
-#
-# ScoreBoardFile: File used to store internal server process information.
-# Not all architectures require this. But if yours does (you'll know because
-# this file will be created when you run Apache) then you *must* ensure that
-# no two invocations of Apache share the same scoreboard file.
-#
-ScoreBoardFile /var/run/httpd.scoreboard
-
-#
-# In the standard configuration, the server will process httpd.conf (this
-# file, specified by the -f command line option), srm.conf, and access.conf
-# in that order. The latter two files are now distributed empty, as it is
-# recommended that all directives be kept in a single file for simplicity.
-# The commented-out values below are the built-in defaults. You can have the
-# server ignore these files altogether by using "/dev/null" (for Unix) or
-# "nul" (for Win32) for the arguments to the directives.
-#
-#ResourceConfig /etc/apache/srm.conf
-#AccessConfig /etc/apache/access.conf
-
-#
-# Timeout: The number of seconds before receives and sends time out.
-#
-Timeout 300
-
-#
-# KeepAlive: Whether or not to allow persistent connections (more than
-# one request per connection). Set to "Off" to deactivate.
-#
-KeepAlive On
-
-#
-# MaxKeepAliveRequests: The maximum number of requests to allow
-# during a persistent connection. Set to 0 to allow an unlimited amount.
-# We recommend you leave this number high, for maximum performance.
-#
-MaxKeepAliveRequests 100
-
-#
-# KeepAliveTimeout: Number of seconds to wait for the next request from the
-# same client on the same connection.
-#
-KeepAliveTimeout 2
-
-#
-# Server-pool size regulation. Rather than making you guess how many
-# server processes you need, Apache dynamically adapts to the load it
-# sees --- that is, it tries to maintain enough server processes to
-# handle the current load, plus a few spare servers to handle transient
-# load spikes (e.g., multiple simultaneous requests from a single
-# Netscape browser).
-#
-# It does this by periodically checking how many servers are waiting
-# for a request. If there are fewer than MinSpareServers, it creates
-# a new spare. If there are more than MaxSpareServers, some of the
-# spares die off. The default values are probably OK for most sites.
-#
-MinSpareServers 5
-MaxSpareServers 10
-
-#
-# Number of servers to start initially --- should be a reasonable ballpark
-# figure.
-#
-StartServers 5
-
-#
-# Limit on total number of servers running, i.e., limit on the number
-# of clients who can simultaneously connect --- if this limit is ever
-# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
-# It is intended mainly as a brake to keep a runaway server from taking
-# the system with it as it spirals down...
-#
-MaxClients 150
-
-#
-# MaxRequestsPerChild: the number of requests each child process is
-# allowed to process before the child dies. The child will exit so
-# as to avoid problems after prolonged use when Apache (and maybe the
-# libraries it uses) leak memory or other resources. On most systems, this
-# isn't really needed, but a few (such as Solaris) do have notable leaks
-# in the libraries. For these platforms, set to something like 10000
-# or so; a setting of 0 means unlimited.
-#
-# NOTE: This value does not include keepalive requests after the initial
-# request per connection. For example, if a child process handles
-# an initial request and 10 subsequent "keptalive" requests, it
-# would only count as 1 request towards this limit.
-#
-MaxRequestsPerChild 0
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, instead of the default. See also the <VirtualHost>
-# directive.
-#
-#Listen 3000
-#Listen 12.34.56.78:80
-
-#
-# BindAddress: You can support virtual hosts with this option. This directive
-# is used to tell the server which IP address to listen to. It can either
-# contain "*", an IP address, or a fully qualified Internet domain name.
-# See also the <VirtualHost> and Listen directives.
-#
-#BindAddress *
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Please read the file http://httpd.apache.org/docs/dso.html for more
-# details about the DSO mechanism and run `httpd -l' for the list of already
-# built-in (statically linked and thus always available) modules in your httpd
-# binary.
-#
-# Note: The order in which modules are loaded is important. Don't change
-# the order below without expert advice.
-#
-# Example:
-# LoadModule foo_module libexec/mod_foo.so
-LoadModule vhost_alias_module libexec/apache/mod_vhost_alias.so
-#LoadModule env_module libexec/apache/mod_env.so
-LoadModule define_module libexec/apache/mod_define.so
-LoadModule config_log_module libexec/apache/mod_log_config.so
-LoadModule mime_magic_module libexec/apache/mod_mime_magic.so
-LoadModule mime_module libexec/apache/mod_mime.so
-LoadModule negotiation_module libexec/apache/mod_negotiation.so
-#LoadModule status_module libexec/apache/mod_status.so
-#LoadModule info_module libexec/apache/mod_info.so
-LoadModule includes_module libexec/apache/mod_include.so
-LoadModule autoindex_module libexec/apache/mod_autoindex.so
-LoadModule dir_module libexec/apache/mod_dir.so
-LoadModule cgi_module libexec/apache/mod_cgi.so
-#LoadModule asis_module libexec/apache/mod_asis.so
-#LoadModule imap_module libexec/apache/mod_imap.so
-#LoadModule action_module libexec/apache/mod_actions.so
-#LoadModule speling_module libexec/apache/mod_speling.so
-#LoadModule userdir_module libexec/apache/mod_userdir.so
-LoadModule alias_module libexec/apache/mod_alias.so
-LoadModule rewrite_module libexec/apache/mod_rewrite.so
-LoadModule access_module libexec/apache/mod_access.so
-LoadModule auth_module libexec/apache/mod_auth.so
-LoadModule anon_auth_module libexec/apache/mod_auth_anon.so
-#LoadModule dbm_auth_module libexec/apache/mod_auth_dbm.so
-#LoadModule digest_module libexec/apache/mod_digest.so
-LoadModule proxy_module libexec/apache/libproxy.so
-LoadModule cern_meta_module libexec/apache/mod_cern_meta.so
-LoadModule expires_module libexec/apache/mod_expires.so
-LoadModule headers_module libexec/apache/mod_headers.so
-#LoadModule usertrack_module libexec/apache/mod_usertrack.so
-#LoadModule log_forensic_module libexec/apache/mod_log_forensic.so
-#LoadModule unique_id_module libexec/apache/mod_unique_id.so
-LoadModule setenvif_module libexec/apache/mod_setenvif.so
-
-# Reconstruction of the complete module list from all available modules
-# (static and shared ones) to achieve correct module execution order.
-# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
-ClearModuleList
-AddModule mod_vhost_alias.c
-#AddModule mod_env.c
-AddModule mod_define.c
-AddModule mod_log_config.c
-AddModule mod_mime_magic.c
-AddModule mod_mime.c
-AddModule mod_negotiation.c
-#AddModule mod_status.c
-#AddModule mod_info.c
-AddModule mod_include.c
-AddModule mod_autoindex.c
-AddModule mod_dir.c
-AddModule mod_cgi.c
-#AddModule mod_asis.c
-#AddModule mod_imap.c
-#AddModule mod_actions.c
-#AddModule mod_speling.c
-#AddModule mod_userdir.c
-AddModule mod_alias.c
-AddModule mod_rewrite.c
-AddModule mod_access.c
-AddModule mod_auth.c
-AddModule mod_auth_anon.c
-#AddModule mod_auth_dbm.c
-#AddModule mod_digest.c
-AddModule mod_proxy.c
-AddModule mod_cern_meta.c
-AddModule mod_expires.c
-AddModule mod_headers.c
-#AddModule mod_usertrack.c
-#AddModule mod_log_forensic.c
-#AddModule mod_unique_id.c
-AddModule mod_so.c
-AddModule mod_setenvif.c
-
-#
-# ExtendedStatus controls whether Apache will generate "full" status
-# information (ExtendedStatus On) or just basic information (ExtendedStatus
-# Off) when the "server-status" handler is called. The default is Off.
-#
-#ExtendedStatus On
-
-### Section 2: 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition. These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-#
-# If your ServerType directive (set earlier in the 'Global Environment'
-# section) is set to "inetd", the next few directives don't have any
-# effect since their settings are defined by the inetd configuration.
-# Skip ahead to the ServerAdmin directive.
-#
-
-#
-# Port: The port to which the standalone server listens. For
-# ports < 1023, you will need httpd to be run as root initially.
-#
-Port 80
-
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
-# . On HPUX you may not be able to use shared memory as nobody, and the
-# suggested workaround is to create a user www and use that user.
-# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
-# when the value of (unsigned)Group is above 60000;
-# don't use Group "#-1" on these systems!
-#
-User nobody
-Group nobody
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed. This address appears on some server-generated pages, such
-# as error documents.
-#
-ServerAdmin root@midas.slackware.lan
-
-#
-# ServerName allows you to set a host name which is sent back to clients for
-# your server if it's different than the one the program would get (i.e., use
-# "www" instead of the host's real name).
-#
-# Note: You cannot just invent host names and hope they work. The name you
-# define here must be a valid DNS name for your host. If you don't understand
-# this, ask your network administrator.
-# If your host doesn't have a registered DNS name, enter its IP address here.
-# You will have to access it by its address (e.g., http://123.45.67.89/)
-# anyway, and this will make redirections work in a sensible way.
-#
-# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
-# machine always knows itself by this address. If you use Apache strictly for
-# local testing and development, you may use 127.0.0.1 as the server name.
-#
-#ServerName www.example.com
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/var/www/htdocs"
-
-#
-# Each directory to which Apache has access, can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories).
-#
-# First, we configure the "default" to be a very restrictive set of
-# permissions.
-#
-<Directory />
- Options FollowSymLinks
- AllowOverride None
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory "/var/www/htdocs">
-
-#
-# This may also be "None", "All", or any combination of "Indexes",
-# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
-#
-# Note that "MultiViews" must be named *explicitly* --- "Options All"
-# doesn't give it to you.
-#
- Options Indexes FollowSymLinks MultiViews
-
-#
-# This controls which options the .htaccess files in directories can
-# override. Can also be "All", or any combination of "Options", "FileInfo",
-# "AuthConfig", and "Limit"
-#
- AllowOverride None
-
-#
-# Controls who can get stuff from this server.
-#
- Order allow,deny
- Allow from all
-</Directory>
-
-#
-# UserDir: The name of the directory which is appended onto a user's home
-# directory if a ~user request is received.
-#
-<IfModule mod_userdir.c>
- UserDir public_html
-</IfModule>
-
-#
-# Control access to UserDir directories. The following is an example
-# for a site where these directories are restricted to read-only.
-#
-#<Directory /home/*/public_html>
-# AllowOverride FileInfo AuthConfig Limit
-# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
-# <Limit GET POST OPTIONS PROPFIND>
-# Order allow,deny
-# Allow from all
-# </Limit>
-# <LimitExcept GET POST OPTIONS PROPFIND>
-# Order deny,allow
-# Deny from all
-# </LimitExcept>
-#</Directory>
-
-#
-# DirectoryIndex: Name of the file or files to use as a pre-written HTML
-# directory index. Separate multiple entries with spaces.
-#
-<IfModule mod_dir.c>
- DirectoryIndex index.html
-</IfModule>
-
-#
-# AccessFileName: The name of the file to look for in each directory
-# for access control information.
-#
-AccessFileName .htaccess
-
-#
-# The following lines prevent .htaccess files from being viewed by
-# Web clients. Since .htaccess files often contain authorization
-# information, access is disallowed for security reasons. Comment
-# these lines out if you want Web visitors to see the contents of
-# .htaccess files. If you change the AccessFileName directive above,
-# be sure to make the corresponding changes here.
-#
-# Also, folks tend to use names such as .htpasswd for password
-# files, so this will protect those as well.
-#
-<Files ~ "^\.ht">
- Order allow,deny
- Deny from all
- Satisfy All
-</Files>
-
-#
-# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
-# document that was negotiated on the basis of content. This asks proxy
-# servers not to cache the document. Uncommenting the following line disables
-# this behavior, and proxies will be allowed to cache the documents.
-#
-#CacheNegotiatedDocs
-
-#
-# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
-# Apache needs to construct a self-referencing URL (a URL that refers back
-# to the server the response is coming from) it will use ServerName and
-# Port to form a "canonical" name. With this setting off, Apache will
-# use the hostname:port that the client supplied, when possible. This
-# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
-#
-UseCanonicalName On
-
-#
-# TypesConfig describes where the mime.types file (or equivalent) is
-# to be found.
-#
-<IfModule mod_mime.c>
- TypesConfig /etc/apache/mime.types
-</IfModule>
-
-#
-# DefaultType is the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value. If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
-DefaultType text/plain
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type. The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-# mod_mime_magic is not part of the default server (you have to add
-# it yourself with a LoadModule [see the DSO paragraph in the 'Global
-# Environment' section], or recompile the server and include mod_mime_magic
-# as part of the configuration), so it's enclosed in an <IfModule> container.
-# This means that the MIMEMagicFile directive will only be processed if the
-# module is part of the server.
-#
-<IfModule mod_mime_magic.c>
- MIMEMagicFile /etc/apache/magic
-</IfModule>
-
-#
-# HostnameLookups: Log the names of clients or just their IP addresses
-# e.g., www.apache.org (on) or 204.62.129.132 (off).
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on, since enabling it means that
-# each client request will result in AT LEAST one lookup request to the
-# nameserver.
-#
-HostnameLookups Off
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here. If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog "| /usr/bin/error-log.sh /var/log/apache/error_log"
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-#
-# The following directives define some format nicknames for use with
-# a CustomLog directive (see below).
-#
-LogFormat "%l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
-LogFormat "%l %u %t \"%r\" %>s %b" common
-LogFormat "%{Referer}i -> %U" referer
-LogFormat "%{User-agent}i" agent
-
-#
-# The location and format of the access logfile (Common Logfile Format).
-# If you do not define any access logfiles within a <VirtualHost>
-# container, they will be logged here. Contrariwise, if you *do*
-# define per-<VirtualHost> access logfiles, transactions will be
-# logged therein and *not* in this file.
-#
-CustomLog /var/log/apache/access_log common
-
-#
-# If you would like to have agent and referer logfiles, uncomment the
-# following directives.
-#
-#CustomLog /var/log/apache/referer_log referer
-#CustomLog /var/log/apache/agent_log agent
-
-#
-# If you prefer a single logfile with access, agent, and referer information
-# (Combined Logfile Format) you can use the following directive.
-#
-#CustomLog /var/log/apache/access_log combined
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (error documents, FTP directory listings,
-# mod_status and mod_info output etc., but not CGI generated documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of: On | Off | EMail
-#
-ServerSignature Off
-
-# EBCDIC configuration:
-# (only for mainframes using the EBCDIC codeset, currently one of:
-# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
-# The following default configuration assumes that "text files"
-# are stored in EBCDIC (so that you can operate on them using the
-# normal POSIX tools like grep and sort) while "binary files" are
-# stored with identical octets as on an ASCII machine.
-#
-# The directives are evaluated in configuration file order, with
-# the EBCDICConvert directives applied before EBCDICConvertByType.
-#
-# If you want to have ASCII HTML documents and EBCDIC HTML documents
-# at the same time, you can use the file extension to force
-# conversion off for the ASCII documents:
-# > AddType text/html .ahtml
-# > EBCDICConvert Off=InOut .ahtml
-#
-# EBCDICConvertByType On=InOut text/* message/* multipart/*
-# EBCDICConvertByType On=In application/x-www-form-urlencoded
-# EBCDICConvertByType On=InOut application/postscript model/vrml
-# EBCDICConvertByType Off=InOut */*
-
-
-#
-# Aliases: Add here as many aliases as you need (with no limit). The format is
-# Alias fakename realname
-#
-<IfModule mod_alias.c>
-
- #
- # Note that if you include a trailing / on fakename then the server will
- # require it to be present in the URL. So "/icons" isn't aliased in this
- # example, only "/icons/". If the fakename is slash-terminated, then the
- # realname must also be slash terminated, and if the fakename omits the
- # trailing slash, the realname must also omit it.
- #
- Alias /icons/ "/var/www/icons/"
-
- <Directory "/var/www/icons">
- Options Indexes MultiViews
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
-
- # This Alias will project the on-line documentation tree under /manual/
- # even if you change the DocumentRoot. Comment it if you don't want to
- # provide access to the on-line documentation.
- #
- Alias /manual/ "/var/www/htdocs/manual/"
-
- <Directory "/var/www/htdocs/manual">
- Options Indexes FollowSymlinks MultiViews
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
-
- #
- # ScriptAlias: This controls which directories contain server scripts.
- # ScriptAliases are essentially the same as Aliases, except that
- # documents in the realname directory are treated as applications and
- # run by the server when requested rather than as documents sent to the client.
- # The same rules about trailing "/" apply to ScriptAlias directives as to
- # Alias.
- #
- ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
-
- #
- # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
- # CGI directory exists, if you have that configured.
- #
- <Directory "/var/www/cgi-bin">
- AllowOverride None
- Options None
- Order allow,deny
- Allow from all
- </Directory>
-
-</IfModule>
-# End of aliases.
-
-#
-# Redirect allows you to tell clients about documents which used to exist in
-# your server's namespace, but do not anymore. This allows you to tell the
-# clients where to look for the relocated document.
-# Format: Redirect old-URI new-URL
-#
-
-#
-# Directives controlling the display of server-generated directory listings.
-#
-<IfModule mod_autoindex.c>
-
- #
- # FancyIndexing is whether you want fancy directory indexing or standard
- #
- IndexOptions FancyIndexing
-
- #
- # AddIcon* directives tell the server which icon to show for different
- # files or filename extensions. These are only displayed for
- # FancyIndexed directories.
- #
- AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
-
- AddIconByType (TXT,/icons/text.gif) text/*
- AddIconByType (IMG,/icons/image2.gif) image/*
- AddIconByType (SND,/icons/sound2.gif) audio/*
- AddIconByType (VID,/icons/movie.gif) video/*
-
- AddIcon /icons/binary.gif .bin .exe
- AddIcon /icons/binhex.gif .hqx
- AddIcon /icons/tar.gif .tar
- AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
- AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
- AddIcon /icons/a.gif .ps .ai .eps
- AddIcon /icons/layout.gif .html .shtml .htm .pdf
- AddIcon /icons/text.gif .txt
- AddIcon /icons/c.gif .c
- AddIcon /icons/p.gif .pl .py
- AddIcon /icons/f.gif .for
- AddIcon /icons/dvi.gif .dvi
- AddIcon /icons/uuencoded.gif .uu
- AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
- AddIcon /icons/tex.gif .tex
- AddIcon /icons/bomb.gif core
-
- AddIcon /icons/back.gif ..
- AddIcon /icons/hand.right.gif README
- AddIcon /icons/folder.gif ^^DIRECTORY^^
- AddIcon /icons/blank.gif ^^BLANKICON^^
-
- #
- # DefaultIcon is which icon to show for files which do not have an icon
- # explicitly set.
- #
- DefaultIcon /icons/unknown.gif
-
- #
- # AddDescription allows you to place a short description after a file in
- # server-generated indexes. These are only displayed for FancyIndexed
- # directories.
- # Format: AddDescription "description" filename
- #
- #AddDescription "GZIP compressed document" .gz
- #AddDescription "tar archive" .tar
- #AddDescription "GZIP compressed tar archive" .tgz
-
- #
- # ReadmeName is the name of the README file the server will look for by
- # default, and append to directory listings.
- #
- # HeaderName is the name of a file which should be prepended to
- # directory indexes.
- #
- ReadmeName README.html
- HeaderName HEADER.html
-
- #
- # IndexIgnore is a set of filenames which directory indexing should ignore
- # and not include in the listing. Shell-style wildcarding is permitted.
- #
- IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
-
-</IfModule>
-# End of indexing directives.
-
-#
-# Document types.
-#
-<IfModule mod_mime.c>
-
- #
- # AddLanguage allows you to specify the language of a document. You can
- # then use content negotiation to give a browser a file in a language
- # it can understand.
- #
- # Note 1: The suffix does not have to be the same as the language
- # keyword --- those with documents in Polish (whose net-standard
- # language code is pl) may wish to use "AddLanguage pl .po" to
- # avoid the ambiguity with the common suffix for perl scripts.
- #
- # Note 2: The example entries below illustrate that in quite
- # some cases the two character 'Language' abbreviation is not
- # identical to the two character 'Country' code for its country,
- # E.g. 'Danmark/dk' versus 'Danish/da'.
- #
- # Note 3: In the case of 'ltz' we violate the RFC by using a three char
- # specifier. But there is 'work in progress' to fix this and get
- # the reference data for rfc1766 cleaned up.
- #
- # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
- # French (fr) - German (de) - Greek-Modern (el)
- # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
- # Portugese (pt) - Luxembourgeois* (ltz)
- # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
- # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
- # Russian (ru)
- #
- AddLanguage da .dk
- AddLanguage nl .nl
- AddLanguage en .en
- AddLanguage et .ee
- AddLanguage fr .fr
- AddLanguage de .de
- AddLanguage el .el
- AddLanguage he .he
- AddCharset ISO-8859-8 .iso8859-8
- AddLanguage it .it
- AddLanguage ja .ja
- AddCharset ISO-2022-JP .jis
- AddLanguage kr .kr
- AddCharset ISO-2022-KR .iso-kr
- AddLanguage nn .nn
- AddLanguage no .no
- AddLanguage pl .po
- AddCharset ISO-8859-2 .iso-pl
- AddLanguage pt .pt
- AddLanguage pt-br .pt-br
- AddLanguage ltz .lu
- AddLanguage ca .ca
- AddLanguage es .es
- AddLanguage sv .sv
- AddLanguage cs .cz .cs
- AddLanguage ru .ru
- AddLanguage zh-TW .zh-tw
- AddCharset Big5 .Big5 .big5
- AddCharset WINDOWS-1251 .cp-1251
- AddCharset CP866 .cp866
- AddCharset ISO-8859-5 .iso-ru
- AddCharset KOI8-R .koi8-r
- AddCharset UCS-2 .ucs2
- AddCharset UCS-4 .ucs4
- AddCharset UTF-8 .utf8
-
- # LanguagePriority allows you to give precedence to some languages
- # in case of a tie during content negotiation.
- #
- # Just list the languages in decreasing order of preference. We have
- # more or less alphabetized them here. You probably want to change this.
- #
- <IfModule mod_negotiation.c>
- LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
- </IfModule>
-
- #
- # AddType allows you to tweak mime.types without actually editing it, or to
- # make certain files to be certain types.
- #
- AddType application/x-tar .tgz
-
- #
- # AddEncoding allows you to have certain browsers uncompress
- # information on the fly. Note: Not all browsers support this.
- # Despite the name similarity, the following Add* directives have nothing
- # to do with the FancyIndexing customization directives above.
- #
- AddEncoding x-compress .Z
- AddEncoding x-gzip .gz .tgz
- #
- # If the AddEncoding directives above are commented-out, then you
- # probably should define those extensions to indicate media types:
- #
- #AddType application/x-compress .Z
- #AddType application/x-gzip .gz .tgz
-
- #
- # AddHandler allows you to map certain file extensions to "handlers",
- # actions unrelated to filetype. These can be either built into the server
- # or added with the Action command (see below)
- #
- # If you want to use server side includes, or CGI outside
- # ScriptAliased directories, uncomment the following lines.
- #
- # To use CGI scripts:
- #
- #AddHandler cgi-script .cgi
-
- #
- # To use server-parsed HTML files
- #
- #AddType text/html .shtml
- #AddHandler server-parsed .shtml
-
- #
- # Uncomment the following line to enable Apache's send-asis HTTP file
- # feature
- #
- #AddHandler send-as-is asis
-
- #
- # If you wish to use server-parsed imagemap files, use
- #
- #AddHandler imap-file map
-
- #
- # To enable type maps, you might want to use
- #
- #AddHandler type-map var
-
-</IfModule>
-# End of document types.
-
-#
-# Action lets you define media types that will execute a script whenever
-# a matching file is called. This eliminates the need for repeated URL
-# pathnames for oft-used CGI file processors.
-# Format: Action media/type /cgi-script/location
-# Format: Action handler-name /cgi-script/location
-#
-
-#
-# MetaDir: specifies the name of the directory in which Apache can find
-# meta information files. These files contain additional HTTP headers
-# to include when sending the document
-#
-#MetaDir .web
-
-#
-# MetaSuffix: specifies the file name suffix for the file containing the
-# meta information.
-#
-#MetaSuffix .meta
-
-#
-# Customizable error response (Apache style)
-# these come in three flavors
-#
-# 1) plain text
-ErrorDocument 500 /missing.html
-# n.b. the single leading (") marks it as text, it does not get output
-#
-# 2) local redirects
-ErrorDocument 404 /missing.html
-# to redirect to local URL /missing.html
-#ErrorDocument 404 /cgi-bin/missing_handler.pl
-# N.B.: You can redirect to a script or a document using server-side-includes.
-#
-# 3) external redirects
-ErrorDocument 402 /missing.html
-# N.B.: Many of the environment variables associated with the original
-# request will *not* be available to such a script.
-
-#
-# Customize behaviour based on the browser
-#
-<IfModule mod_setenvif.c>
-
- #
- # The following directives modify normal HTTP response behavior.
- # The first directive disables keepalive for Netscape 2.x and browsers that
- # spoof it. There are known problems with these browser implementations.
- # The second directive is for Microsoft Internet Explorer 4.0b2
- # which has a broken HTTP/1.1 implementation and does not properly
- # support keepalive when it is used on 301 or 302 (redirect) responses.
- #
- BrowserMatch "Mozilla/2" nokeepalive
- BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
-
- #
- # The following directive disables HTTP/1.1 responses to browsers which
- # are in violation of the HTTP/1.0 spec by not being able to grok a
- # basic 1.1 response.
- #
- BrowserMatch "RealPlayer 4\.0" force-response-1.0
- BrowserMatch "Java/1\.0" force-response-1.0
- BrowserMatch "JDK/1\.0" force-response-1.0
-
-</IfModule>
-# End of browser customization directives
-
-#
-# Allow server status reports, with the URL of http://servername/server-status
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-status>
-# SetHandler server-status
-# Order deny,allow
-# Deny from all
-# Allow from .example.com
-#</Location>
-
-#
-# Allow remote server configuration reports, with the URL of
-# http://servername/server-info (requires that mod_info.c be loaded).
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-info>
-# SetHandler server-info
-# Order deny,allow
-# Deny from all
-# Allow from .example.com
-#</Location>
-
-#
-# There have been reports of people trying to abuse an old bug from pre-1.1
-# days. This bug involved a CGI script distributed as a part of Apache.
-# By uncommenting these lines you can redirect these attacks to a logging
-# script on phf.apache.org. Or, you can record them yourself, using the script
-# support/phf_abuse_log.cgi.
-#
-#<Location /cgi-bin/phf*>
-# Deny from all
-# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
-#</Location>
-
-### Section 3: Virtual Hosts
-#
-# VirtualHost: If you want to maintain multiple domains/hostnames on your
-# machine you can setup VirtualHost containers for them. Most configurations
-# use only name-based virtual hosts so the server doesn't need to worry about
-# IP addresses. This is indicated by the asterisks in the directives below.
-#
-# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
-# for further details before you try to setup virtual hosts.
-#
-# You may use the command line option '-S' to verify your virtual host
-# configuration.
-
-#
-# Use name-based virtual hosting.
-#
-#NameVirtualHost *:80
-
-#
-# VirtualHost example:
-# Almost any Apache directive may go into a VirtualHost container.
-# The first VirtualHost section is used for requests without a known
-# server name.
-#
-#<VirtualHost *:80>
-# ServerAdmin webmaster@dummy-host.example.com
-# DocumentRoot /www/docs/dummy-host.example.com
-# ServerName dummy-host.example.com
-# ErrorLog logs/dummy-host.example.com-error_log
-# CustomLog logs/dummy-host.example.com-access_log common
-#</VirtualHost>
-
-# By default, all external Apache modules are disabled. To enable a particular
-# module for Apache, make sure the necessary packages are installed. Then
-# uncomment the appropriate Include line below, save the file, and restart
-# Apache. Note that some modules may need additional configuration steps. For
-# example, mod_ssl requires a site certificate which you may need to generate.
-#
-# Lastly, if you remove a module package, be sure to edit this file and comment
-# out the appropriate Include line.
-
-# ==> mod_php configuration settings <==
-#
-# PACKAGES REQUIRED: openssl-solibs (A series) and/or openssl (N series),
-# mysql (AP series), gmp (L series), mhash (L series),
-# and apache (N series)
-#
-#Include /etc/apache/mod_php.conf
-
-# ==> mod_ssl configuration settings <==
-#
-# PACKAGES REQUIRED: apache (N series) and openssl (N series)
-#
-#Include /etc/apache/mod_ssl.conf
-
-#NameVirtualHost VSERVER_IP
-
-Include /etc/apache/vhosts
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/apache/php.ini b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/apache/php.ini
deleted file mode 100644
index e6cddef..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/apache/php.ini
+++ /dev/null
@@ -1,1122 +0,0 @@
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-;
-; This is the recommended, PHP 4-style version of the php.ini-dist file. It
-; sets some non standard settings, that make PHP more efficient, more secure,
-; and encourage cleaner coding.
-; The price is that with these settings, PHP may be incompatible with some
-; applications, and sometimes, more difficult to develop with. Using this
-; file is warmly recommended for production sites. As all of the changes from
-; the standard settings are thoroughly documented, you can go over each one,
-; and decide whether you want to use it or not.
-;
-; For general information about the php.ini file, please consult the php.ini-dist
-; file, included in your PHP distribution.
-;
-; This file is different from the php.ini-dist file in the fact that it features
-; different values for several directives, in order to improve performance, while
-; possibly breaking compatibility with the standard out-of-the-box behavior of
-; PHP 3. Please make sure you read what's different, and modify your scripts
-; accordingly, if you decide to use this file instead.
-;
-; - register_globals = Off [Security, Performance]
-; Global variables are no longer registered for input data (POST, GET, cookies,
-; environment and other server variables). Instead of using $foo, you must use
-; you can use $_REQUEST["foo"] (includes any variable that arrives through the
-; request, namely, POST, GET and cookie variables), or use one of the specific
-; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
-; on where the input originates. Also, you can look at the
-; import_request_variables() function.
-; Note that register_globals is going to be depracated (i.e., turned off by
-; default) in the next version of PHP, because it often leads to security bugs.
-; Read http://php.net/manual/en/security.registerglobals.php for further
-; information.
-; - display_errors = Off [Security]
-; With this directive set to off, errors that occur during the execution of
-; scripts will no longer be displayed as a part of the script output, and thus,
-; will no longer be exposed to remote users. With some errors, the error message
-; content may expose information about your script, web server, or database
-; server that may be exploitable for hacking. Production sites should have this
-; directive set to off.
-; - log_errors = On [Security]
-; This directive complements the above one. Any errors that occur during the
-; execution of your script will be logged (typically, to your server's error log,
-; but can be configured in several ways). Along with setting display_errors to off,
-; this setup gives you the ability to fully understand what may have gone wrong,
-; without exposing any sensitive information to remote users.
-; - output_buffering = 4096 [Performance]
-; Set a 4KB output buffer. Enabling output buffering typically results in less
-; writes, and sometimes less packets sent on the wire, which can often lead to
-; better performance. The gain this directive actually yields greatly depends
-; on which Web server you're working with, and what kind of scripts you're using.
-; - register_argc_argv = Off [Performance]
-; Disables registration of the somewhat redundant $argv and $argc global
-; variables.
-; - magic_quotes_gpc = Off [Performance]
-; Input data is no longer escaped with slashes so that it can be sent into
-; SQL databases without further manipulation. Instead, you should use the
-; function addslashes() on each input element you wish to send to a database.
-; - variables_order = "GPCS" [Performance]
-; The environment variables are not hashed into the $HTTP_ENV_VARS[]. To access
-; environment variables, you can use getenv() instead.
-; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
-; By default, PHP surpresses errors of type E_NOTICE. These error messages
-; are emitted for non-critical errors, but that could be a symptom of a bigger
-; problem. Most notably, this will cause error messages about the use
-; of uninitialized variables to be displayed.
-; - allow_call_time_pass_reference = Off [Code cleanliness]
-; It's not possible to decide to force a variable to be passed by reference
-; when calling a function. The PHP 4 style to do this is by making the
-; function require the relevant argument by reference.
-
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-engine = On
-
-; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
-; NOTE: Using short tags should be avoided when developing applications or
-; libraries that are meant for redistribution, or deployment on PHP
-; servers which are not under your control, because short tags may not
-; be supported on the target server. For portable, redistributable code,
-; be sure not to use short tags.
-short_open_tag = On
-
-; Allow ASP-style <% %> tags.
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-y2k_compliance = On
-
-; Output buffering allows you to send header lines (including cookies) even
-; after you send body content, at the price of slowing PHP's output layer a
-; bit. You can enable output buffering during runtime by calling the output
-; buffering functions. You can also enable output buffering for all files by
-; setting this directive to On. If you wish to limit the size of the buffer
-; to a certain size - you can use a maximum number of bytes instead of 'On', as
-; a value for this directive (e.g., output_buffering=4096).
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few handreds bytes each as a result of compression.
-; If you want larger chunk size for better performence, enable output_buffering
-; also.
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-zlib.output_compression = Off
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instanciated.
-; A warning appears if the specified function is not defined, or if the
-; function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func=
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; Whether to enable the ability to force arguments to be passed by reference
-; at function call time. This method is deprecated and is likely to be
-; unsupported in future versions of PHP/Zend. The encouraged method of
-; specifying which arguments should be passed by reference is in the function
-; declaration. You're encouraged to try and turn this option Off and make
-; sure your scripts work properly with it in order to ensure they will work
-; with future versions of the language (you will receive a warning each time
-; you use this feature, and the argument will be passed by value instead of by
-; reference).
-allow_call_time_pass_reference = Off
-
-;
-; Safe Mode
-;
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-;
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <font color="??????"> would work.
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-
-;
-; Misc
-;
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-expose_php = On
-
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-max_execution_time = 30 ; Maximum execution time of each script, in seconds
-max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
-memory_limit = 8M ; Maximum amount of memory a script may consume (8MB)
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; error_reporting is a bit-field. Or each number up to get desired error
-; reporting level
-; E_ALL - All errors and warnings
-; E_ERROR - fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-;
-; Examples:
-;
-; - Show all errors, except for notices
-;
-;error_reporting = E_ALL & ~E_NOTICE
-;
-; - Show only errors
-;
-;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
-;
-; - Show all errors
-;
-error_reporting = E_ALL
-
-; Print out errors (as a part of the output). For production web sites,
-; you're strongly encouraged to turn this feature off, and use error logging
-; instead (see below). Keeping display_errors enabled on a production web site
-; may reveal security information to end users, such as file paths on your Web
-; server, your database schema or other information.
-display_errors = Off
-
-; Even when display_errors is on, errors that occur during PHP's startup
-; sequence are not displayed. It's strongly recommended to keep
-; display_startup_errors off, except for when debugging.
-display_startup_errors = Off
-
-; Log errors into a log file (server-specific log, stderr, or error_log (below))
-; As stated above, you're strongly advised to use error logging in place of
-; error displaying on production web sites.
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line until ignore_repeated_source is set true.
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; sourcelines.
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-report_memleaks = On
-
-; Store the last error/warning message in $php_errormsg (boolean).
-track_errors = Off
-
-; Disable the inclusion of HTML tags in error messages.
-;html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://www.php.net/docs.php
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot.
-;docref_root = "/phpmanual/"
-;docref_ext = .html
-
-; String to output before an error message.
-;error_prepend_string = "<font color=ff0000>"
-
-; String to output after an error message.
-;error_append_string = "</font>"
-
-; Log errors to specified file.
-;error_log = filename
-
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-;
-; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
-
-; The separator used in PHP generated URLs to separate arguments.
-; Default is "&".
-;arg_separator.output = "&amp;"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; Default is "&".
-; NOTE: Every character in this directive is considered as separator!
-;arg_separator.input = ";&"
-
-; This directive describes the order in which PHP registers GET, POST, Cookie,
-; Environment and Built-in variables (G, P, C, E & S respectively, often
-; referred to as EGPCS or GPC). Registration is done from left to right, newer
-; values override older values.
-variables_order = "GPCS"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data. This makes most sense when coupled with track_vars - in which
-; case you can access all of the GPC variables through the $HTTP_*_VARS[],
-; variables.
-;
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-register_globals = Off
-
-; This directive tells PHP whether to declare the argv&argc variables (that
-; would contain the GET information). If you don't use these variables, you
-; should turn it off for increased performance.
-register_argc_argv = Off
-
-; Maximum size of POST data that PHP will accept.
-post_max_size = 8M
-
-; This directive is deprecated. Use variables_order instead.
-gpc_order = "GPC"
-
-; Magic quotes
-;
-
-; Magic quotes for incoming GET/POST/Cookie data.
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-magic_quotes_sybase = Off
-
-; Automatically add files before or after any PHP document.
-auto_prepend_file =
-auto_append_file =
-
-; As of 4.0b4, PHP always outputs a character encoding by default in
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-default_mimetype = "text/html"
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable.
-;always_populate_raw_post_data = On
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-;include_path = ".:/php/includes"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-doc_root =
-
-; The directory under which PHP opens the script using /~usernamem used only
-; if nonempty.
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; extension_dir = "./"
-extension_dir = "/usr/lib/php/extensions/"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request.
-; cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is zero. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection
-; fastcgi.log = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-;cgi.rfc2616_headers = 0
-
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-upload_max_filesize = 10M
-
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-allow_url_fopen = On
-
-; Define the anonymous ftp password (your email address)
-;from="john@doe.com"
-
-; Define the user agent for php to send
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; auto_detect_line_endings = Off
-
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-;
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; Note that it should be the name of the module only; no directory information
-; needs to go here. Specify the location of the extension with the
-; extension_dir directive above.
-;
-; Load the MySQL module by default. Comment this out if you don't use MySQL.
-extension=mysql.so
-
-; Load the gettext extension by default. Comment this out if you don't have the
-; gettext shared library installed.
-extension=gettext.so
-
-;Windows Extensions
-;Note that MySQL and ODBC support is now built in, so no dll is needed for it.
-;
-;extension=php_mbstring.dll
-;extension=php_bz2.dll
-;extension=php_cpdf.dll
-;extension=php_crack.dll
-;extension=php_curl.dll
-;extension=php_db.dll
-;extension=php_dba.dll
-;extension=php_dbase.dll
-;extension=php_dbx.dll
-;extension=php_domxml.dll
-;extension=php_exif.dll
-;extension=php_fdf.dll
-;extension=php_filepro.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_hyperwave.dll
-;extension=php_iconv.dll
-;extension=php_ifx.dll
-;extension=php_iisfunc.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_java.dll
-;extension=php_ldap.dll
-;extension=php_mcrypt.dll
-;extension=php_mhash.dll
-;extension=php_mime_magic.dll
-;extension=php_ming.dll
-;extension=php_mssql.dll
-;extension=php_msql.dll
-;extension=php_oci8.dll
-;extension=php_openssl.dll
-;extension=php_oracle.dll
-;extension=php_pdf.dll
-;extension=php_pgsql.dll
-;extension=php_printer.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_sockets.dll
-;extension=php_sybase_ct.dll
-;extension=php_w32api.dll
-;extension=php_xmlrpc.dll
-;extension=php_xslt.dll
-;extension=php_yaz.dll
-;extension=php_zip.dll
-
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-SMTP = localhost
-smtp_port = 25
-
-; For Win32 only.
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-;sendmail_path =
-
-[Java]
-;java.class.path = .\php_java.jar
-;java.home = c:\jdk
-;java.library = c:\jdk\jre\bin\hotspot\jvm.dll
-;java.library.path = .\
-
-[SQL]
-sql.safe_mode = Off
-
-[ODBC]
-;odbc.default_db = Not yet implemented
-;odbc.default_user = Not yet implemented
-;odbc.default_pw = Not yet implemented
-
-; Allow or prevent persistent links.
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of uodbc.defaultlrl and uodbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-[MySQL]
-; Allow or prevent persistent links.
-mysql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-mysql.trace_mode = Off
-
-[mSQL]
-; Allow or prevent persistent links.
-msql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-msql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-msql.max_links = -1
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Noitce message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-pgsql.log_notice = 0
-
-[Sybase]
-; Allow or prevent persistent links.
-sybase.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybase.max_links = -1
-
-;sybase.interface_file = "/usr/sybase/interfaces"
-
-; Minimum error severity to display.
-sybase.min_error_severity = 10
-
-; Minimum message severity to display.
-sybase.min_message_severity = 10
-
-; Compatability mode with old versions of PHP 3.0.
-; If on, this will cause PHP to automatically assign types to results according
-; to their Sybase type, instead of treating them all as strings. This
-; compatibility mode will probably not stay around forever, so try applying
-; whatever necessary changes to your code, and turn it off.
-sybase.compatability_mode = Off
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-sybct.min_client_severity = 10
-
-[dbx]
-; returned column names can be converted for compatibility reasons
-; possible values for dbx.colnames_case are
-; "unchanged" (default, if not set)
-; "lowercase"
-; "uppercase"
-; the recommended default is either upper- or lowercase, but
-; unchanged is currently set for backwards compatibility
-dbx.colnames_case = "lowercase"
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-bcmath.scale = 0
-
-[browscap]
-;browscap = extra/browscap.ini
-
-[Informix]
-; Default host for ifx_connect() (doesn't apply in safe mode).
-ifx.default_host =
-
-; Default user for ifx_connect() (doesn't apply in safe mode).
-ifx.default_user =
-
-; Default password for ifx_connect() (doesn't apply in safe mode).
-ifx.default_password =
-
-; Allow or prevent persistent links.
-ifx.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-ifx.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ifx.max_links = -1
-
-; If on, select statements return the contents of a text blob instead of its id.
-ifx.textasvarchar = 0
-
-; If on, select statements return the contents of a byte blob instead of its id.
-ifx.byteasvarchar = 0
-
-; Trailing blanks are stripped from fixed-length char columns. May help the
-; life of Informix SE users.
-ifx.charasvarchar = 0
-
-; If on, the contents of text and byte blobs are dumped to a file instead of
-; keeping them in memory.
-ifx.blobinfile = 0
-
-; NULL's are returned as empty strings, unless this is set to 1. In that case,
-; NULL's are returned as string 'NULL'.
-ifx.nullformat = 0
-
-[Session]
-; Handler used to store/retrieve data.
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;session.save_path = /tmp
-
-; Whether to use cookies.
-session.use_cookies = 1
-
-; This option enables administrators to make their users invulnerable to
-; attacks which involve passing session ids in URLs; defaults to 0.
-; session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-session.cookie_domain =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-session.serialize_handler = php
-
-; Define the probability that the 'garbage collection' process is started
-; on every session initialization.
-; The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts
-; on each request.
-
-session.gc_probability = 1
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-session.gc_maxlifetime = 1440
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, albeit register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled.
-
-session.bug_compat_42 = 0
-session.bug_compat_warn = 1
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-session.referer_check =
-
-; How many bytes to read from the file.
-session.entropy_length = 0
-
-; Specified here to create the session id.
-session.entropy_file =
-
-;session.entropy_length = 16
-
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects.
-; or leave this empty to avoid sending anti-caching headers.
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-session.use_trans_sid = 0
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatability mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. Default = 25
-;mssql.max_procs = 25
-
-[Assertion]
-; Assert(expr); active by default.
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-;assert.warning = On
-
-; Don't bail out by default.
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-;assert.quiet_eval = 0
-
-[Ingres II]
-; Allow or prevent persistent links.
-ingres.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-ingres.max_persistent = -1
-
-; Maximum number of links, including persistents. -1 means no limit.
-ingres.max_links = -1
-
-; Default database (format: [node_id::]dbname[/srv_class]).
-ingres.default_database =
-
-; Default user.
-ingres.default_user =
-
-; Default password.
-ingres.default_password =
-
-[Verisign Payflow Pro]
-; Default Payflow Pro server.
-pfpro.defaulthost = "test-payflow.verisign.com"
-
-; Default port to connect to.
-pfpro.defaultport = 443
-
-; Default timeout in seconds.
-pfpro.defaulttimeout = 30
-
-; Default proxy IP address (if required).
-;pfpro.proxyaddress =
-
-; Default proxy port.
-;pfpro.proxyport =
-
-; Default proxy logon.
-;pfpro.proxylogon =
-
-; Default proxy password.
-;pfpro.proxypassword =
-
-[com]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-;com.typelib_file =
-; allow Distributed-COM calls
-;com.allow_dcom = true
-; autoregister constants of a components typlib on com_load()
-;com.autoregister_typelib = true
-; register constants casesensitive
-;com.autoregister_casesensitive = false
-; show warnings on duplicate constat registrations
-;com.autoregister_verbose = true
-
-[Printer]
-;printer.default_printer = ""
-
-[mbstring]
-; language for internal character representation.
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation accoding to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-;mbstring.func_overload = 0
-
-[FrontBase]
-;fbsql.allow_persistent = On
-;fbsql.autocommit = On
-;fbsql.default_database =
-;fbsql.default_database_password =
-;fbsql.default_host =
-;fbsql.default_password =
-;fbsql.default_user = "_SYSTEM"
-;fbsql.generate_warnings = Off
-;fbsql.max_connections = 128
-;fbsql.max_links = 128
-;fbsql.max_persistent = -1
-;fbsql.max_results = 128
-;fbsql.batchSize = 1000
-
-[Crack]
-; Modify the setting below to match the directory location of the cracklib
-; dictionary files. Include the base filename, but not the file extension.
-; crack.default_dictionary = "c:\php\lib\cracklib_dict"
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-;exif.encode_unicode = ISO-8859-15
-;exif.decode_unicode_motorola = UCS-2BE
-;exif.decode_unicode_intel = UCS-2LE
-;exif.encode_jis =
-;exif.decode_jis_motorola = JIS
-;exif.decode_jis_intel = JIS
-
-; Local Variables:
-; tab-width: 4
-; End:
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/apache/vhosts b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/apache/vhosts
deleted file mode 100644
index e69de29..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/apache/vhosts
+++ /dev/null
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/hosts b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/hosts
deleted file mode 100644
index 6e33147..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/hosts
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# hosts This file describes a number of hostname-to-address
-# mappings for the TCP/IP subsystem. It is mostly
-# used at boot time, when no name servers are running.
-# On small systems, this file can be used instead of a
-# "named" name server. Just add the names, addresses
-# and any aliases to this file...
-#
-# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
-# should NEVER be named with the name of the machine. It causes problems
-# for some (stupid) programs, irc and reputedly talk. :^)
-#
-
-# For loopbacking.
-127.0.0.1 localhost
-# This next entry is technically wrong, but good enough to get TCP/IP apps
-# to quit complaining that they can't verify the hostname on a loopback-only
-# Linux box.
-127.0.0.1 darkstar.example.net darkstar
-
-# End of hosts.
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/logrotate.d/apache b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/logrotate.d/apache
deleted file mode 100644
index f31fbe2..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/logrotate.d/apache
+++ /dev/null
@@ -1,11 +0,0 @@
-/var/log/apache/access_log /var/log/apache/error_log {
- monthly
- nomail
- compress
- create 0664 root root
- rotate 12
- postrotate
- /etc/rc.d/rc.httpd restart > /dev/null
- endscript
-}
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/profile b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/profile
deleted file mode 100644
index 563594a..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/profile
+++ /dev/null
@@ -1,87 +0,0 @@
-# /etc/profile: This file contains system-wide defaults used by
-# all Bourne (and related) shells.
-
-# Set the values for some environment variables:
-export MINICOM="-c on"
-export MANPATH=/usr/local/man:/usr/man:/usr/X11R6/man
-export HOSTNAME="`cat /etc/HOSTNAME`"
-export LESSOPEN="|lesspipe.sh %s"
-export LESS="-M"
-
-# If the user doesn't have a .inputrc, use the one in /etc.
-if [ ! -r "$HOME/.inputrc" ]; then
- export INPUTRC=/etc/inputrc
-fi
-
-# Set the default system $PATH:
-PATH="/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/games"
-
-# For root users, ensure that /usr/local/sbin, /usr/sbin, and /sbin are in
-# the $PATH. Some means of connection don't add these by default (sshd comes
-# to mind).
-if [ "`id -u`" = "0" ]; then
- echo $PATH | grep /usr/local/sbin 1> /dev/null 2> /dev/null
- if [ ! $? = 0 ]; then
- PATH=/usr/local/sbin:/usr/sbin:/sbin:$PATH
- fi
-fi
-
-# I had problems using 'eval tset' instead of 'TERM=', but you might want to
-# try it anyway. I think with the right /etc/termcap it would work great.
-# eval `tset -sQ "$TERM"`
-if [ "$TERM" = "" -o "$TERM" = "unknown" ]; then
- TERM=linux
-fi
-
-# Set ksh93 visual editing mode:
-if [ "$SHELL" = "/bin/ksh" ]; then
- VISUAL=emacs
-# VISUAL=gmacs
-# VISUAL=vi
-fi
-
-# Set a default shell prompt:
-#PS1='`hostname`:`pwd`# '
-if [ "$SHELL" = "/bin/pdksh" ]; then
- PS1='! $ '
-elif [ "$SHELL" = "/bin/ksh" ]; then
- PS1='! ${PWD/#$HOME/~}$ '
-elif [ "$SHELL" = "/bin/zsh" ]; then
- PS1='%n@%m:%~%# '
-elif [ "$SHELL" = "/bin/ash" ]; then
- PS1='$ '
-else
- PS1='\u@\h:\w\$ '
-fi
-PS2='> '
-export PATH DISPLAY LESS TERM PS1 PS2
-
-# Default umask. A umask of 022 prevents new files from being created group
-# and world writable.
-umask 022
-
-# Set up the LS_COLORS and LS_OPTIONS environment variables for color ls:
-if [ "$SHELL" = "/bin/zsh" ]; then
- eval `dircolors -z`
-elif [ "$SHELL" = "/bin/ash" ]; then
- eval `dircolors -s`
-else
- eval `dircolors -b`
-fi
-
-# Append any additional sh scripts found in /etc/profile.d/:
-for profile_script in /etc/profile.d/*.sh ; do
- if [ -x $profile_script ]; then
- . $profile_script
- fi
-done
-unset profile_script
-
-# For non-root users, add the current directory to the search path:
-if [ ! "`id -u`" = "0" ]; then
- PATH="$PATH:."
-fi
-
-# firewall:
-export FTP_PASSIVE=1
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.0 b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.0
deleted file mode 100755
index bfec90a..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.0
+++ /dev/null
@@ -1,110 +0,0 @@
-#! /bin/sh
-#
-# rc.6 This file is executed by init when it goes into runlevel
-# 0 (halt) or runlevel 6 (reboot). It kills all processes,
-# unmounts file systems and then either halts or reboots.
-#
-# Version: @(#)/etc/rc.d/rc.6 2.47 Sat Jan 13 13:37:26 PST 2001
-#
-# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
-# Modified by: Patrick J. Volkerding, <volkerdi@slackware.com>
-#
-
-# Set the path.
-PATH=/sbin:/etc:/bin:/usr/bin
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
- . /etc/rc.d/rc.sysvinit
-fi
-
-# Set linefeed mode to avoid staircase effect.
-stty onlcr
-
-echo "Running shutdown script $0:"
-
-# Find out how we were called.
-case "$0" in
- *0)
- command="halt"
- ;;
- *6)
- command=reboot
- ;;
- *)
- echo "$0: call me as \"rc.0\" or \"rc.6\" please!"
- exit 1
- ;;
-esac
-
-# Stop the Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
- /etc/rc.d/rc.httpd stop
-fi
-
-# Stop the MySQL database:
-if [ -r /var/run/mysql/mysql.pid ]; then
- . /etc/rc.d/rc.mysqld stop
-fi
-
-# Stop the Samba server:
-if [ -x /etc/rc.d/rc.samba ]; then
- . /etc/rc.d/rc.samba stop
-fi
-
-# Try to kill dhcpcd so the DHCP leases can be returned:
-killall -15 dhcpcd 1> /dev/null 2> /dev/null
-
-# Try to shut down pppd:
-PS="$(ps ax)"
-if echo "$PS" | grep -q -w pppd ; then
- if [ -x /usr/sbin/ppp-off ]; then
- /usr/sbin/ppp-off
- fi
-fi
-
-# Turn off process accounting:
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
- echo "Turning off process accounting."
- /sbin/accton
-fi
-
-# Kill all processes.
-# INIT is supposed to handle this entirely now, but this didn't always
-# work correctly without this second pass at killing off the processes.
-# Since INIT already notified the user that processes were being killed,
-# we'll avoid echoing this info this time around.
-if [ "$1" != "fast" ]; then # shutdown did not already kill all processes
- killall5 -15
- sleep 5
- killall5 -9
-fi
-
-# Carry a random seed between reboots.
-echo "Saving random seed from /dev/urandom in /etc/random-seed."
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
- dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
- dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-chmod 600 /etc/random-seed
-
-# Before unmounting file systems write a reboot or halt record to wtmp.
-$command -w
-
-# Clear /var/lock/subsys.
-if [ -d /var/lock/subsys ]; then
- rm -f /var/lock/subsys/*
-fi
-
-# This never hurts:
-sync
-
-# sleep 1 fixes problems with some hard drives that don't
-# otherwise finish syncing before reboot or poweroff
-sleep 1
-
-# This is to ensure all processes have completed on SMP machines:
-wait
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.4 b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.4
deleted file mode 100644
index b972052..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.4
+++ /dev/null
@@ -1,256 +0,0 @@
-#!/bin/sh
-#
-# rc.M This file is executed by init(8) when the system is being
-# initialized for one of the "multi user" run levels (i.e.
-# levels 1 through 6). It usually does mounting of file
-# systems et al.
-#
-# Version: @(#)/etc/rc.d/rc.M 2.23 Wed Feb 26 19:20:58 PST 2003
-#
-# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-# Heavily modified by Patrick Volkerding <volkerdi@slackware.com>
-#
-
-# Tell the viewers what's going to happen.
-echo "Going multiuser..."
-
-# Screen blanks after 15 minutes idle time, and powers down in one hour
-# if the kernel supports APM or ACPI power management:
-#/bin/setterm -blank 15 -powersave powerdown -powerdown 60
-
-# Set the hostname.
-#if [ -r /etc/HOSTNAME ]; then
-# /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .)
-#else
- # fall back on this old default:
-# echo "darkstar.example.net" > /etc/HOSTNAME
-# /bin/hostname darkstar
-#fi
-
-# Save the contents of 'dmesg':
-#/bin/dmesg -s 65536 > /var/log/dmesg
-
-# Start the system logger.
-if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then
- . /etc/rc.d/rc.syslog start
-fi
-
-# Initialize PCMCIA devices:
-#
-# NOTE: This used to be started near the top of rc.S so that PCMCIA devices
-# could be fsck'ed along with the other drives. This had some unfortunate
-# side effects, however, since root isn't yet read-write, and /var might not
-# even be mounted the .pid files can't be correctly written in /var/run and
-# the pcmcia system can't be correctly shut down. If you want some PCMCIA
-# partition to be mounted at boot (or when the card is inserted) then add
-# the appropriate lines to /etc/pcmcia/scsi.opts.
-#
-if [ -x /etc/rc.d/rc.pcmcia ] ; then
- . /etc/rc.d/rc.pcmcia start
- # The cards might need a little extra time here to initialize.
- if [ -r /var/run/cardmgr.pid ]; then
- sleep 5
- fi
-fi
-
-# Initialize the networking hardware. If your network driver is a module
-# and you haven't loaded it manually, this will be deferred until after
-# the hotplug system loads the module below.
-#if [ -x /etc/rc.d/rc.inet1 ]; then
-# . /etc/rc.d/rc.inet1
-#fi
-
-# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices:
-if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then
- # Don't run hotplug if 'nohotplug' was given at boot.
- if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
- echo "Activating hardware detection: /etc/rc.d/rc.hotplug start"
- . /etc/rc.d/rc.hotplug start
- fi
-fi
-
-# Start networking daemons:
-if [ -x /etc/rc.d/rc.inet2 ]; then
- . /etc/rc.d/rc.inet2
-fi
-
-# Remove stale locks and junk files (must be done after mount -a!)
-/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null
-
-# Remove stale hunt sockets so the game can start.
-if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then
- echo "Removing your stale hunt sockets from /tmp."
- /bin/rm -f /tmp/hunt*
-fi
-
-# Ensure basic filesystem permissions sanity.
-chmod 755 / 2> /dev/null
-chmod 1777 /tmp /var/tmp
-
-# Update all the shared library links:
-if [ -x /sbin/ldconfig ]; then
- echo "Updating shared library links: /sbin/ldconfig"
- /sbin/ldconfig
-fi
-
-# Update the X font indexes:
-if [ -x /usr/X11R6/bin/fc-cache ]; then
- echo "Updating X font indexes: /usr/X11R6/bin/fc-cache"
- /usr/X11R6/bin/fc-cache
-fi
-
-# Start the print spooling system. This will usually be LPRng (lpd) or CUPS.
-if [ -x /etc/rc.d/rc.cups ]; then
- # Start CUPS:
- /etc/rc.d/rc.cups start
-elif [ -x /etc/rc.d/rc.lprng ]; then
- # Start LPRng (lpd):
- . /etc/rc.d/rc.lprng start
-fi
-
-# Start netatalk. (a file/print server for Macs using Appletalk)
-if [ -x /etc/rc.d/rc.atalk ]; then
- /etc/rc.d/rc.atalk
-fi
-
-# Start smartd, which monitors the status of S.M.A.R.T. compatible
-# hard drives and reports any problems. Note some devices (which aren't
-# smart, I guess ;) will hang if probed by smartd, so it's commented out
-# by default.
-#if [ -x /usr/sbin/smartd ]; then
-# /usr/sbin/smartd
-#fi
-
-# Monitor the UPS with genpowerd.
-# To use this, uncomment this section and edit your settings in
-# /etc/genpowerd.conf (serial device, UPS type, etc). For more information,
-# see "man genpowerd" or the extensive documentation in the
-# /usr/doc/genpower-1.0.3 directory.
-# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want
-# support for stopping the UPS's inverter after the machine halts.
-#if [ -x /sbin/genpowerd ]; then
-# echo "Starting genpowerd daemon..."
-# /sbin/genpowerd
-#fi
-
-# Turn on process accounting. To enable process accounting, make sure the
-# option for BSD process accounting is enabled in your kernel, and then
-# create the file /var/log/pacct (touch /var/log/pacct). By default, process
-# accounting is not enabled (since /var/log/pacct does not exist). This is
-# because the log file can get VERY large.
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
- /sbin/accton /var/log/pacct
- chmod 640 /var/log/pacct
- echo "Process accounting turned on."
-fi
-
-# Start crond (Dillon's crond):
-# If you want cron to actually log activity to /var/log/cron, then change
-# -l10 to -l8 to increase the logging level.
-if [ -x /usr/sbin/crond ]; then
- /usr/sbin/crond -l10 >>/var/log/cron 2>&1
-fi
-
-# Start atd (manages jobs scheduled with 'at'):
-if [ -x /usr/sbin/atd ]; then
- /usr/sbin/atd -b 15 -l 1
-fi
-
-# Slackware-Mini-Quota-HOWTO:
-# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to
-# the appropriate partitions as listed in /etc/fstab. Here's an example:
-#
-# /dev/hda2 /home ext3 defaults,usrquota 1 1
-#
-# You'll then need to setup initial quota files at the top of the partitions
-# to support quota, like this:
-# touch /home/aquota.user /home/aquota.group
-# chmod 600 /home/aquota.user /home/aquota.group
-#
-# Then, reboot to activate the system.
-# To edit user quotas, use 'edquota'. See 'man edquota'. Also, the
-# official Quota Mini-HOWTO has lots of useful information. That can be found
-# here: /usr/doc/Linux-HOWTOs/Quota
-
-# Check quotas and then turn quota system on:
-if grep -q quota /etc/fstab ; then
- if [ -x /sbin/quotacheck ]; then
- echo "Checking filesystem quotas: /sbin/quotacheck -avugm"
- /sbin/quotacheck -avugm
- fi
- if [ -x /sbin/quotaon ]; then
- echo "Activating filesystem quotas: /sbin/quotaon -avug"
- /sbin/quotaon -avug
- fi
-fi
-
-# Start the sendmail daemon:
-if [ -x /etc/rc.d/rc.sendmail ]; then
- . /etc/rc.d/rc.sendmail start
-fi
-
-# Start the APM daemon if APM is enabled in the kernel:
-if [ -x /usr/sbin/apmd ]; then
- if cat /proc/apm 1> /dev/null 2> /dev/null ; then
- echo "Starting APM daemon: /usr/sbin/apmd"
- /usr/sbin/apmd
- fi
-fi
-
-# Start the ACPI (Advanced Configuration and Power Interface) daemon:
-if [ -x /etc/rc.d/rc.acpid ]; then
- . /etc/rc.d/rc.acpid start
-fi
-
-# Load ALSA (sound) defaults:
-if [ -x /etc/rc.d/rc.alsa ]; then
- . /etc/rc.d/rc.alsa
-fi
-
-# Load a custom screen font if the user has an rc.font script.
-if [ -x /etc/rc.d/rc.font ]; then
- . /etc/rc.d/rc.font
-fi
-
-# Load a custom keymap if the user has an rc.keymap script.
-if [ -x /etc/rc.d/rc.keymap ]; then
- . /etc/rc.d/rc.keymap
-fi
-
-# Initialize HP Officejet support:
-if [ -x /etc/rc.d/rc.hpoj ]; then
- . /etc/rc.d/rc.hpoj start
-fi
-
-# Start the MySQL database:
-if [ -x /etc/rc.d/rc.mysqld ]; then
- . /etc/rc.d/rc.mysqld start
-fi
-
-# Start Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
- . /etc/rc.d/rc.httpd start
-fi
-
-# Start Samba (a file/print server for Win95/NT machines).
-# Samba can be started in /etc/inetd.conf instead.
-if [ -x /etc/rc.d/rc.samba ]; then
- . /etc/rc.d/rc.samba start
-fi
-
-# Start the GPM mouse server:
-if [ -x /etc/rc.d/rc.gpm ]; then
- . /etc/rc.d/rc.gpm start
-fi
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
- . /etc/rc.d/rc.sysvinit
-fi
-
-# Start the local setup procedure.
-if [ -x /etc/rc.d/rc.local ]; then
- . /etc/rc.d/rc.local
-fi
-
-# All done.
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.6 b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.6
deleted file mode 100755
index bfec90a..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.6
+++ /dev/null
@@ -1,110 +0,0 @@
-#! /bin/sh
-#
-# rc.6 This file is executed by init when it goes into runlevel
-# 0 (halt) or runlevel 6 (reboot). It kills all processes,
-# unmounts file systems and then either halts or reboots.
-#
-# Version: @(#)/etc/rc.d/rc.6 2.47 Sat Jan 13 13:37:26 PST 2001
-#
-# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
-# Modified by: Patrick J. Volkerding, <volkerdi@slackware.com>
-#
-
-# Set the path.
-PATH=/sbin:/etc:/bin:/usr/bin
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
- . /etc/rc.d/rc.sysvinit
-fi
-
-# Set linefeed mode to avoid staircase effect.
-stty onlcr
-
-echo "Running shutdown script $0:"
-
-# Find out how we were called.
-case "$0" in
- *0)
- command="halt"
- ;;
- *6)
- command=reboot
- ;;
- *)
- echo "$0: call me as \"rc.0\" or \"rc.6\" please!"
- exit 1
- ;;
-esac
-
-# Stop the Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
- /etc/rc.d/rc.httpd stop
-fi
-
-# Stop the MySQL database:
-if [ -r /var/run/mysql/mysql.pid ]; then
- . /etc/rc.d/rc.mysqld stop
-fi
-
-# Stop the Samba server:
-if [ -x /etc/rc.d/rc.samba ]; then
- . /etc/rc.d/rc.samba stop
-fi
-
-# Try to kill dhcpcd so the DHCP leases can be returned:
-killall -15 dhcpcd 1> /dev/null 2> /dev/null
-
-# Try to shut down pppd:
-PS="$(ps ax)"
-if echo "$PS" | grep -q -w pppd ; then
- if [ -x /usr/sbin/ppp-off ]; then
- /usr/sbin/ppp-off
- fi
-fi
-
-# Turn off process accounting:
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
- echo "Turning off process accounting."
- /sbin/accton
-fi
-
-# Kill all processes.
-# INIT is supposed to handle this entirely now, but this didn't always
-# work correctly without this second pass at killing off the processes.
-# Since INIT already notified the user that processes were being killed,
-# we'll avoid echoing this info this time around.
-if [ "$1" != "fast" ]; then # shutdown did not already kill all processes
- killall5 -15
- sleep 5
- killall5 -9
-fi
-
-# Carry a random seed between reboots.
-echo "Saving random seed from /dev/urandom in /etc/random-seed."
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
- dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
- dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-chmod 600 /etc/random-seed
-
-# Before unmounting file systems write a reboot or halt record to wtmp.
-$command -w
-
-# Clear /var/lock/subsys.
-if [ -d /var/lock/subsys ]; then
- rm -f /var/lock/subsys/*
-fi
-
-# This never hurts:
-sync
-
-# sleep 1 fixes problems with some hard drives that don't
-# otherwise finish syncing before reboot or poweroff
-sleep 1
-
-# This is to ensure all processes have completed on SMP machines:
-wait
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.K b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.K
deleted file mode 100755
index 00a1501..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.K
+++ /dev/null
@@ -1,88 +0,0 @@
-#! /bin/sh
-#
-# rc.K This file is executed by init when it goes into runlevel
-# 1, which is the administrative state. It kills all
-# daemons and then puts the system into single user mode.
-# Note that the file systems are kept mounted.
-#
-# Version: @(#)/etc/rc.d/rc.K 3.1415 Sat Jan 13 13:37:26 PST 2001
-#
-# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
-# Modified by: Patrick J. Volkerding <volkerdi@slackware.com>
-#
-
-# Set the path.
-PATH=/sbin:/bin:/usr/bin:/usr/sbin
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
- . /etc/rc.d/rc.sysvinit
-fi
-
-# Try to turn off quota:
-if grep -q quota /etc/fstab ; then
- if [ -x /sbin/quotaoff ]; then
- echo "Turning off filesystem quotas."
- /sbin/quotaoff -a
- fi
-fi
-
-# Try to turn off accounting:
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
- echo "Turning off accounting."
- /sbin/accton
-fi
-
-# Stop the Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
- /etc/rc.d/rc.httpd stop
-fi
-
-# Stop the Samba server:
-if [ -x /etc/rc.d/rc.samba ]; then
- . /etc/rc.d/rc.samba stop
-fi
-
-# Shut down the NFS server:
-if [ -x /etc/rc.d/rc.nfsd ]; then
- /etc/rc.d/rc.nfsd stop
-fi
-
-# Shut down PCMCIA devices:
-if [ -x /etc/rc.d/rc.pcmcia ] ; then
- . /etc/rc.d/rc.pcmcia stop
- # The cards might need a little extra time here to initialize.
- sleep 5
-fi
-
-# Kill all processes.
-echo
-echo "Sending all processes the SIGHUP signal."
-killall5 -1
-echo -n "Waiting for processes to hang up"
-for loop in 0 1 2 3 4 5 ; do
- sleep 1
- echo -n "."
-done
-echo
-echo "Sending all processes the SIGTERM signal."
-killall5 -15
-echo -n "Waiting for processes to terminate"
-for loop in 0 1 2 3 4 5 ; do
- sleep 1
- echo -n "."
-done
-echo
-echo "Sending all processes the SIGKILL signal."
-killall5 -9
-echo -n "Waiting for processes to exit"
-for loop in 0 1 2 3 4 5 ; do
- sleep 1
- echo -n "."
-done
-echo
-
-# Now go to the single user level
-echo "Going to single user mode..."
-telinit -t 1 1
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.M b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.M
deleted file mode 100755
index 0cb3343..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.M
+++ /dev/null
@@ -1,256 +0,0 @@
-#!/bin/sh
-#
-# rc.M This file is executed by init(8) when the system is being
-# initialized for one of the "multi user" run levels (i.e.
-# levels 1 through 6). It usually does mounting of file
-# systems et al.
-#
-# Version: @(#)/etc/rc.d/rc.M 2.23 Wed Feb 26 19:20:58 PST 2003
-#
-# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-# Heavily modified by Patrick Volkerding <volkerdi@slackware.com>
-#
-
-# Tell the viewers what's going to happen.
-echo "Going multiuser..."
-
-# Screen blanks after 15 minutes idle time, and powers down in one hour
-# if the kernel supports APM or ACPI power management:
-#/bin/setterm -blank 15 -powersave powerdown -powerdown 60
-
-# Set the hostname.
-#if [ -r /etc/HOSTNAME ]; then
-# /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .)
-#else
- # fall back on this old default:
-# echo "darkstar.example.net" > /etc/HOSTNAME
-# /bin/hostname darkstar
-#fi
-
-# Save the contents of 'dmesg':
-#/bin/dmesg -s 65536 > /var/log/dmesg
-
-# Start the system logger.
-if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then
- . /etc/rc.d/rc.syslog start
-fi
-
-# Initialize PCMCIA devices:
-#
-# NOTE: This used to be started near the top of rc.S so that PCMCIA devices
-# could be fsck'ed along with the other drives. This had some unfortunate
-# side effects, however, since root isn't yet read-write, and /var might not
-# even be mounted the .pid files can't be correctly written in /var/run and
-# the pcmcia system can't be correctly shut down. If you want some PCMCIA
-# partition to be mounted at boot (or when the card is inserted) then add
-# the appropriate lines to /etc/pcmcia/scsi.opts.
-#
-if [ -x /etc/rc.d/rc.pcmcia ] ; then
- . /etc/rc.d/rc.pcmcia start
- # The cards might need a little extra time here to initialize.
- if [ -r /var/run/cardmgr.pid ]; then
- sleep 5
- fi
-fi
-
-# Initialize the networking hardware. If your network driver is a module
-# and you haven't loaded it manually, this will be deferred until after
-# the hotplug system loads the module below.
-#if [ -x /etc/rc.d/rc.inet1 ]; then
-# . /etc/rc.d/rc.inet1
-#fi
-
-# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices:
-if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then
- # Don't run hotplug if 'nohotplug' was given at boot.
- if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
- echo "Activating hardware detection: /etc/rc.d/rc.hotplug start"
- . /etc/rc.d/rc.hotplug start
- fi
-fi
-
-# Start networking daemons:
-if [ -x /etc/rc.d/rc.inet2 ]; then
- . /etc/rc.d/rc.inet2
-fi
-
-# Remove stale locks and junk files (must be done after mount -a!)
-/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null
-
-# Remove stale hunt sockets so the game can start.
-if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then
- echo "Removing your stale hunt sockets from /tmp."
- /bin/rm -f /tmp/hunt*
-fi
-
-# Ensure basic filesystem permissions sanity.
-chmod 755 / 2> /dev/null
-chmod 1777 /tmp /var/tmp
-
-# Update all the shared library links:
-if [ -x /sbin/ldconfig ]; then
- echo "Updating shared library links: /sbin/ldconfig"
- /sbin/ldconfig
-fi
-
-# Update the X font indexes:
-if [ -x /usr/X11R6/bin/fc-cache ]; then
- echo "Updating X font indexes: /usr/X11R6/bin/fc-cache"
- /usr/X11R6/bin/fc-cache
-fi
-
-# Start the print spooling system. This will usually be LPRng (lpd) or CUPS.
-if [ -x /etc/rc.d/rc.cups ]; then
- # Start CUPS:
- /etc/rc.d/rc.cups start
-elif [ -x /etc/rc.d/rc.lprng ]; then
- # Start LPRng (lpd):
- . /etc/rc.d/rc.lprng start
-fi
-
-# Start netatalk. (a file/print server for Macs using Appletalk)
-if [ -x /etc/rc.d/rc.atalk ]; then
- /etc/rc.d/rc.atalk
-fi
-
-# Start smartd, which monitors the status of S.M.A.R.T. compatible
-# hard drives and reports any problems. Note some devices (which aren't
-# smart, I guess ;) will hang if probed by smartd, so it's commented out
-# by default.
-#if [ -x /usr/sbin/smartd ]; then
-# /usr/sbin/smartd
-#fi
-
-# Monitor the UPS with genpowerd.
-# To use this, uncomment this section and edit your settings in
-# /etc/genpowerd.conf (serial device, UPS type, etc). For more information,
-# see "man genpowerd" or the extensive documentation in the
-# /usr/doc/genpower-1.0.3 directory.
-# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want
-# support for stopping the UPS's inverter after the machine halts.
-#if [ -x /sbin/genpowerd ]; then
-# echo "Starting genpowerd daemon..."
-# /sbin/genpowerd
-#fi
-
-# Turn on process accounting. To enable process accounting, make sure the
-# option for BSD process accounting is enabled in your kernel, and then
-# create the file /var/log/pacct (touch /var/log/pacct). By default, process
-# accounting is not enabled (since /var/log/pacct does not exist). This is
-# because the log file can get VERY large.
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
- /sbin/accton /var/log/pacct
- chmod 640 /var/log/pacct
- echo "Process accounting turned on."
-fi
-
-# Start crond (Dillon's crond):
-# If you want cron to actually log activity to /var/log/cron, then change
-# -l10 to -l8 to increase the logging level.
-if [ -x /usr/sbin/crond ]; then
- /usr/sbin/crond -l10 >>/var/log/cron 2>&1
-fi
-
-# Start atd (manages jobs scheduled with 'at'):
-if [ -x /usr/sbin/atd ]; then
- /usr/sbin/atd -b 15 -l 1
-fi
-
-# Slackware-Mini-Quota-HOWTO:
-# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to
-# the appropriate partitions as listed in /etc/fstab. Here's an example:
-#
-# /dev/hda2 /home ext3 defaults,usrquota 1 1
-#
-# You'll then need to setup initial quota files at the top of the partitions
-# to support quota, like this:
-# touch /home/aquota.user /home/aquota.group
-# chmod 600 /home/aquota.user /home/aquota.group
-#
-# Then, reboot to activate the system.
-# To edit user quotas, use 'edquota'. See 'man edquota'. Also, the
-# official Quota Mini-HOWTO has lots of useful information. That can be found
-# here: /usr/doc/Linux-HOWTOs/Quota
-
-# Check quotas and then turn quota system on:
-if grep -q quota /etc/fstab ; then
- if [ -x /sbin/quotacheck ]; then
- echo "Checking filesystem quotas: /sbin/quotacheck -avugm"
- /sbin/quotacheck -avugm
- fi
- if [ -x /sbin/quotaon ]; then
- echo "Activating filesystem quotas: /sbin/quotaon -avug"
- /sbin/quotaon -avug
- fi
-fi
-
-# Start the sendmail daemon:
-if [ -x /etc/rc.d/rc.sendmail ]; then
- . /etc/rc.d/rc.sendmail start
-fi
-
-# Start the APM daemon if APM is enabled in the kernel:
-if [ -x /usr/sbin/apmd ]; then
- if cat /proc/apm 1> /dev/null 2> /dev/null ; then
- echo "Starting APM daemon: /usr/sbin/apmd"
- /usr/sbin/apmd
- fi
-fi
-
-# Start the ACPI (Advanced Configuration and Power Interface) daemon:
-if [ -x /etc/rc.d/rc.acpid ]; then
- . /etc/rc.d/rc.acpid start
-fi
-
-# Load ALSA (sound) defaults:
-if [ -x /etc/rc.d/rc.alsa ]; then
- . /etc/rc.d/rc.alsa
-fi
-
-# Load a custom screen font if the user has an rc.font script.
-if [ -x /etc/rc.d/rc.font ]; then
- . /etc/rc.d/rc.font
-fi
-
-# Load a custom keymap if the user has an rc.keymap script.
-if [ -x /etc/rc.d/rc.keymap ]; then
- . /etc/rc.d/rc.keymap
-fi
-
-# Initialize HP Officejet support:
-if [ -x /etc/rc.d/rc.hpoj ]; then
- . /etc/rc.d/rc.hpoj start
-fi
-
-# Start the MySQL database:
-if [ -x /etc/rc.d/rc.mysqld ]; then
- . /etc/rc.d/rc.mysqld start
-fi
-
-# Start Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
- . /etc/rc.d/rc.httpd start
-fi
-
-# Start Samba (a file/print server for Win95/NT machines).
-# Samba can be started in /etc/inetd.conf instead.
-if [ -x /etc/rc.d/rc.samba ]; then
- . /etc/rc.d/rc.samba start
-fi
-
-# Start the GPM mouse server:
-if [ -x /etc/rc.d/rc.gpm ]; then
- . /etc/rc.d/rc.gpm start
-fi
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
- . /etc/rc.d/rc.sysvinit
-fi
-
-# Start the local setup procedure.
-if [ -x /etc/rc.d/rc.local ]; then
- . /etc/rc.d/rc.local
-fi
-
-# All done.
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.S b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.S
deleted file mode 100755
index 05c75b4..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.S
+++ /dev/null
@@ -1,294 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.S: System initialization script.
-#
-# Mostly written by: Patrick J. Volkerding, <volkerdi@slackware.com>
-#
-
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-
-# Mount /proc right away:
-/sbin/mount -v proc /proc -n -t proc
-
-# If 'nohotplug' was given at boot, or rc.hotplug has been turned off
-# (is not executable), then shut off hotplugging in the kernel now.
-# Turning off hotplug is *not* recommended, and will break some things.
-if [ -w /proc/sys/kernel/hotplug ]; then
- if grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
- echo "/dev/null" > /proc/sys/kernel/hotplug
- elif [ ! -x /etc/rc.d/rc.hotplug ]; then
- echo "/dev/null" > /proc/sys/kernel/hotplug
- fi
-fi
-
-# Start devfsd if necessary. On newer kernels, udev should be used instead.
-if [ -x /etc/rc.d/rc.devfsd ]; then
- /etc/rc.d/rc.devfsd start
-fi
-
-# Mount sysfs next, if the kernel supports it:
-if [ -d /sys ]; then
- if cat /proc/filesystems | grep -w sysfs 1> /dev/null 2> /dev/null ; then
- if ! cat /proc/mounts | grep -w sysfs 1> /dev/null 2> /dev/null ; then
- /sbin/mount -v sysfs /sys -n -t sysfs
- fi
- fi
-fi
-
-# Initialize udev to manage /dev entries for 2.6.x kernels:
-if [ -x /etc/rc.d/rc.udev ]; then
- if ! grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
- /etc/rc.d/rc.udev
- fi
-fi
-
-# Enable swapping:
-/sbin/swapon -a
-
-# Test to see if the root partition is read-only, like it ought to be.
-READWRITE=no
-if touch /fsrwtestfile 2>/dev/null; then
- rm -f /fsrwtestfile
- READWRITE=yes
-else
- echo "Testing root filesystem status: read-only filesystem"
-fi
-
-# See if a forced filesystem check was requested at shutdown:
-if [ -r /etc/forcefsck ]; then
- FORCEFSCK="-f"
-fi
-
-# Check the root filesystem:
-if [ ! $READWRITE = yes ]; then
- RETVAL=0
- if [ ! -r /etc/fastboot ]; then
- echo "Checking root filesystem:"
- /sbin/fsck $FORCEFSCK -C -a /
- RETVAL=$?
- fi
- # An error code of 2 or higher will require a reboot.
- if [ $RETVAL -ge 2 ]; then
- # An error code equal to or greater than 4 means that some errors
- # could not be corrected. This requires manual attention, so we
- # offer a chance to try to fix the problem in single-user mode:
- if [ $RETVAL -ge 4 ]; then
- echo
- echo "***********************************************************"
- echo "*** An error occurred during the root filesystem check. ***"
- echo "*** You will now be given a chance to log into the ***"
- echo "*** system in single-user mode to fix the problem. ***"
- echo "*** ***"
- echo "*** If you are using the ext2 filesystem, running ***"
- echo "*** 'e2fsck -v -y <partition>' might help. ***"
- echo "***********************************************************"
- echo
- echo "Once you exit the single-user shell, the system will reboot."
- echo
- PS1="(Repair filesystem) \#"; export PS1
- sulogin
- else # With an error code of 2 or 3, reboot the machine automatically:
- echo
- echo "***********************************"
- echo "*** The filesystem was changed. ***"
- echo "*** The system will now reboot. ***"
- echo "***********************************"
- echo
- fi
- echo "Unmounting file systems."
- /sbin/umount -a -r
- /sbin/mount -n -o remount,ro /
- echo "Rebooting system."
- sleep 2
- reboot -f
- fi
- # Remount the root filesystem in read-write mode
- echo "Remounting root device with read-write enabled."
- /sbin/mount -w -v -n -o remount /
- if [ $? -gt 0 ] ; then
- echo
- echo "Attempt to remount root device as read-write failed! This is going to"
- echo "cause serious problems."
- echo
- echo "If you're using the UMSDOS filesystem, you **MUST** mount the root partition"
- echo "read-write! You can make sure the root filesystem is getting mounted "
- echo "read-write with the 'rw' flag to Loadlin:"
- echo
- echo "loadlin vmlinuz root=/dev/hda1 rw (replace /dev/hda1 with your root device)"
- echo
- echo "Normal bootdisks can be made to mount a system read-write with the rdev command:"
- echo
- echo "rdev -R /dev/fd0 0"
- echo
- echo "You can also get into your system by using a boot disk with a command like this"
- echo "on the LILO prompt line: (change the root partition name as needed)"
- echo
- echo "LILO: mount root=/dev/hda1 rw"
- echo
- echo "Please press ENTER to continue, then reboot and use one of the above methods to"
- echo -n "get into your machine and start looking for the problem. "
- read junk;
- fi
-else
- echo "Testing root filesystem status: read-write filesystem"
- if cat /etc/fstab | grep ' / ' | grep umsdos 1> /dev/null 2> /dev/null ; then
- ROOTTYPE="umsdos"
- fi
- if [ ! "$ROOTTYPE" = "umsdos" ]; then # no warn for UMSDOS
- echo
- echo "*** ERROR: Root partition has already been mounted read-write. Cannot check!"
- echo
- echo "For filesystem checking to work properly, your system must initially mount"
- echo "the root partition as read only. Please modify your kernel with 'rdev' so that"
- echo "it does this. If you're booting with LILO, add a line:"
- echo
- echo " read-only"
- echo
- echo "to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it."
- echo
- echo "If you boot from a kernel on a floppy disk, put it in the drive and type:"
- echo " rdev -R /dev/fd0 1"
- echo
- echo "If you boot from a bootdisk, or with Loadlin, you can add the 'ro' flag."
- echo
- echo "This will fix the problem *AND* eliminate this annoying message. :^)"
- echo
- echo -n "Press ENTER to continue. "
- read junk;
- fi
-fi # Done checking root filesystem
-
-# Any /etc/mtab that exists here is old, so we delete it to start over:
-/bin/rm -f /etc/mtab*
-# Remounting the / partition will initialize the new /etc/mtab:
-/sbin/mount -w -o remount /
-
-# Fix /etc/mtab to list sys and proc if they were not yet entered in
-# /etc/mtab because / was still mounted read-only:
-if [ -d /proc/sys ]; then
- /sbin/mount -f proc /proc -t proc
-fi
-if [ -d /sys/bus ]; then
- /sbin/mount -f sysfs /sys -t sysfs
-fi
-
-# Set the system time from the hardware clock using hwclock --hctosys.
-if [ -x /sbin/hwclock ]; then
- if grep "^UTC" /etc/hardwareclock 1> /dev/null 2> /dev/null ; then
- echo "Setting system time from the hardware clock (UTC)."
- /sbin/hwclock --utc --hctosys
- else
- echo "Setting system time from the hardware clock (localtime)."
- /sbin/hwclock --localtime --hctosys
- fi
-fi
-
-# Configure ISA Plug-and-Play devices:
-if [ -r /etc/isapnp.conf ]; then
- if [ -x /sbin/isapnp ]; then
- /sbin/isapnp /etc/isapnp.conf
- fi
-fi
-
-# This loads any kernel modules that are needed. These might be required to
-# use your ethernet card, sound card, or other optional hardware.
-if [ -x /etc/rc.d/rc.modules -a -r /proc/modules ]; then
- . /etc/rc.d/rc.modules
-fi
-
-# Configure runtime kernel parameters:
-if [ -x /sbin/sysctl -a -r /etc/sysctl.conf ]; then
- /sbin/sysctl -e -p /etc/sysctl.conf
-fi
-
-# Initialize the Logical Volume Manager.
-# This won't start unless we find /etc/lvmtab (LVM1) or
-# /etc/lvm/backup/ (LVM2). This is created by /sbin/vgscan, so to
-# use LVM you must run /sbin/vgscan yourself the first time (and
-# create some VGs and LVs).
-if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
- echo "Initializing LVM (Logical Volume Manager):"
- # Check for device-mapper support.
- if ! cat /proc/devices | grep -w device-mapper 1> /dev/null 2> /dev/null ; then
- # If device-mapper exists as a module, try to load it.
- if [ -r /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko ]; then
- insmod /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko
- fi
- fi
- # Scan for new volume groups:
- /sbin/vgscan 2> /dev/null
- if [ $? = 0 ]; then
- # This needs a moment to register.
- sleep 10
- # Make volume groups available to the kernel.
- # This should also make logical volumes available.
- /sbin/vgchange -ay
- # Enable swapping again in case any LVs are used for swap. Ignore previous error. :-)
- /sbin/swapon -a
- fi
-fi
-
-# Check all the non-root filesystems:
-if [ ! -r /etc/fastboot ]; then
- echo "Checking non-root filesystems:"
- /sbin/fsck $FORCEFSCK -C -R -A -a
-fi
-
-# mount non-root file systems in fstab (but not NFS or SMB
-# because TCP/IP is not yet configured, and not proc because
-# that has already been mounted):
-/sbin/mount -a -v -t nonfs,nosmbfs,noproc
-
-# Clean up some temporary files:
-( cd /var/log/setup/tmp && rm -rf * )
-/bin/rm -f /var/run/utmp /var/run/*pid /etc/nologin /var/run/lpd* \
- /var/run/ppp* /etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot
-
-# Attempt to umount and remove any leftover /initrd:
-if [ -d /initrd ]; then
- /sbin/umount /initrd 2> /dev/null
- rmdir /initrd 2> /dev/null
- blockdev --flushbufs /dev/ram0 2> /dev/null
-fi
-
-# Create a fresh utmp file:
-touch /var/run/utmp
-chown root.utmp /var/run/utmp
-chmod 664 /var/run/utmp
-
-if [ "$ROOTTYPE" = "umsdos" ]; then # we need to update any files added in DOS:
- echo "Synchronizing UMSDOS directory structure:"
- echo " /sbin/umssync -r99 -v- /"
- /sbin/umssync -r99 -v- /
-fi
-
-# Setup the /etc/motd to reflect the current kernel level:
-# THIS WIPES ANY CHANGES YOU MAKE TO /ETC/MOTD WITH EACH BOOT.
-# COMMENT THIS OUT IF YOU WANT TO MAKE A CUSTOM VERSION.
-echo "$(/bin/uname -sr)." > /etc/motd
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
- . /etc/rc.d/rc.sysvinit
-fi
-
-# Run serial port setup script:
-# (CAREFUL! This can make some systems hang if the rc.serial script isn't
-# set up correctly. If this happens, you may have to edit the file from a
-# boot disk)
-#
-# . /etc/rc.d/rc.serial
-
-# Carry an entropy pool between reboots to improve randomness.
-if [ -f /etc/random-seed ]; then
- echo "Using /etc/random-seed to initialize /dev/urandom."
- cat /etc/random-seed > /dev/urandom
-fi
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
- dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
- dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-chmod 600 /etc/random-seed
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.httpd b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.httpd
deleted file mode 100644
index 00b8837..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.httpd
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.httpd
-#
-# Start/stop/restart the Apache web server.
-#
-# To make Apache start automatically at boot, make this
-# file executable: chmod 755 /etc/rc.d/rc.httpd
-#
-
-case "$1" in
- 'start')
- /usr/sbin/apachectl start ;;
- 'stop')
- /usr/sbin/apachectl stop ;;
- 'restart')
- /usr/sbin/apachectl restart ;;
- *)
- echo "usage $0 start|stop|restart" ;;
-esac
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inet2 b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inet2
deleted file mode 100755
index db56589..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inet2
+++ /dev/null
@@ -1,129 +0,0 @@
-#!/bin/sh
-#
-# rc.inet2 This shell script boots up the entire network system.
-# Note, that when this script is used to also fire
-# up any important remote NFS disks (like the /usr
-# directory), care must be taken to actually
-# have all the needed binaries online _now_ ...
-#
-# Uncomment or comment out sections depending on which
-# services your site requires.
-#
-# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-# Modified for Slackware by Patrick Volkerding <volkerdi@slackware.com>
-
-
-# At this point, we are ready to talk to The World...
-
-
-# Mount remote (NFS) filesystems:
-if cat /etc/fstab | grep -v '^#' | grep -w nfs 1> /dev/null 2> /dev/null ; then
- # Start the RPC portmapper if we find NFS volumes defined in /etc/fstab,
- # since it will need to be running in order to mount them. If portmap
- # is not running, attempting to mount an NFS partition will cause mount
- # to hang. Keep this in mind if you plan to mount unlisted partitions...
- if [ -x /etc/rc.d/rc.portmap ]; then
- . /etc/rc.d/rc.portmap start
- else
- # Warn about a possible NFS problem. It's also possible to mount NFS partitions
- # without rpc.portmap by using '-o nolock' (not a good idea in most cases).
- echo "WARNING: NFS partitions found in /etc/fstab, but /etc/rc.d/rc.portmap is"
- echo " not executable. If you do not run portmap, NFS partitions will"
- echo " not mount properly. To start rpc.portmap at boot, change the"
- echo " permissions on /etc/rc.d/rc.portmap: chmod 755 /etc/rc.d/rc.portmap"
- sleep 10
- fi
- echo "Mounting remote (NFS) file systems: /sbin/mount -a -t nfs"
- /sbin/mount -a -t nfs # This may be our /usr runtime!
- # Show the mounted volumes:
- /sbin/mount -v -t nfs
-fi
-
-# Load the RPC portmapper if /etc/rc.d/rc.portmap is executable.
-# This might be needed to mount NFS partitions that are not listed in /etc/fstab.
-if [ -x /etc/rc.d/rc.portmap ]; then
- . /etc/rc.d/rc.portmap start
-fi
-
-# Mount remote (SMB) filesystems:
-if cat /etc/fstab | grep -v '^#' | grep -w smbfs 1> /dev/null 2> /dev/null ; then
- echo "Mounting remote (SMB) file systems: /sbin/mount -a -t smbfs"
- /sbin/mount -a -t smbfs
- # Show the mounted volumes:
- /sbin/mount -v -t smbfs
-fi
-
-# Start the system logger if it is not already running (maybe because /usr
-# is on a network partition).
-if [ -x /etc/rc.d/rc.syslog -a -d /var/log -a ! -r /var/run/syslogd.pid ]; then
- . /etc/rc.d/rc.syslog start
-fi
-
-# If there is a firewall script, run it before enabling packet forwarding.
-# See the HOWTOs on http://www.netfilter.org/ for documentation on
-# setting up a firewall or NAT on Linux. In some cases this might need to
-# be moved past the section below dealing with IP packet forwarding.
-if [ -x /etc/rc.d/rc.firewall ]; then
- /etc/rc.d/rc.firewall start
-fi
-
-# Turn on IPv4 packet forwarding support.
-if [ -x /etc/rc.d/rc.ip_forward ]; then
- . /etc/rc.d/rc.ip_forward start
-fi
-
-# Start the inetd server:
-if [ -x /etc/rc.d/rc.inetd ]; then
- /etc/rc.d/rc.inetd start
-fi
-
-# Start the OpenSSH SSH daemon:
-if [ -x /etc/rc.d/rc.sshd ]; then
- echo "Starting OpenSSH SSH daemon: /usr/sbin/sshd"
- /etc/rc.d/rc.sshd start
-fi
-
-# Start the BIND name server daemon:
-if [ -x /etc/rc.d/rc.bind ]; then
- /etc/rc.d/rc.bind start
-fi
-
-# Start NIS (the Network Information Service):
-if [ -x /etc/rc.d/rc.yp ]; then
- . /etc/rc.d/rc.yp start
-fi
-
-# Start the NFS server. Note that for this to work correctly, you'll
-# need to load the knfsd module for kernel NFS server support.
-# You'll also need to set up some shares in /etc/exports, and be sure
-# that /etc/rc.d/rc.portmap is executable.
-# Starting the NFS server:
-if [ -x /etc/rc.d/rc.nfsd ]; then
- /etc/rc.d/rc.nfsd start
-fi
-
-# Stuff you won't need follows. ;-)
-
-# # Start the network routing daemon:
-# if [ -x /usr/sbin/routed ]; then
-# echo "Starting network routing daemon: /usr/sbin/routed"
-# /usr/sbin/routed -g -s
-# fi
-
-# # Start the system status server:
-# if [ -x /usr/sbin/rwhod ]; then
-# echo "Starting system status server: /usr/sbin/rwhod"
-# /usr/sbin/rwhod
-# fi
-
-# # Fire up the PC-NFS daemon(s). This is a primarily obsolete system, and may
-# # not be very secure. It's not at all needed for normal NFS server support.
-# # You probably should not run this.
-# if [ -x /usr/sbin/rpc.pcnfsd ]; then
-# echo "Starting PC-NFS daemons: /usr/sbin/rpc.pcnfsd /usr/sbin/rpc.bwnfsd"
-# /usr/sbin/rpc.pcnfsd /var/spool/lpd
-# fi
-# if [ -x /usr/sbin/rpc.bwnfsd ]; then
-# /usr/sbin/rpc.bwnfsd /var/spool/lpd
-# fi
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inetd b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inetd
deleted file mode 100644
index 9fe1419..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.inetd
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-# Start/stop/restart inetd, the BSD Internet super-daemon.
-
-# Start inetd:
-inetd_start() {
- if [ -x /usr/sbin/inetd ]; then
- echo "Starting Internet super-server daemon: /usr/sbin/inetd"
- /usr/sbin/inetd
- fi
-}
-
-# Stop inetd:
-inetd_stop() {
- killall inetd
-}
-
-# Restart inetd:
-inetd_restart() {
- inetd_stop
- sleep 1
- inetd_start
-}
-
-case "$1" in
-'start')
- inetd_start
- ;;
-'stop')
- inetd_stop
- ;;
-'restart')
- inetd_restart
- ;;
-*)
- echo "usage $0 start|stop|restart"
-esac
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.ip_forward b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.ip_forward
deleted file mode 100644
index 52bd2fe..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.ip_forward
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/sh
-# /etc/rc.d/rc.ip_forward: start/stop IP packet forwarding
-#
-# If you intend to run your Linux box as a router, i.e. as a
-# computer that forwards and redistributes network packets, you
-# will need to enable IP packet forwarding in your kernel.
-#
-# To activate IP packet forwarding at boot time, make this
-# script executable: chmod 755 /etc/rc.d/rc.ip_forward
-#
-# To disable IP packet forwarding at boot time, make this
-# script non-executable: chmod 644 /etc/rc.d/rc.ip_forward
-
-# Start IP packet forwarding:
-ip_forward_start() {
- if [ -f /proc/sys/net/ipv4/ip_forward ]; then
- echo "Activating IPv4 packet forwarding."
- echo 1 > /proc/sys/net/ipv4/ip_forward
- fi
- # When using IPv4 packet forwarding, you will also get the
- # rp_filter, which automatically rejects incoming packets if the
- # routing table entry for their source address doesn't match the
- # network interface they're arriving on. This has security
- # advantages because it prevents the so-called IP spoofing,
- # however it can pose problems if you use asymmetric routing
- # (packets from you to a host take a different path than packets
- # from that host to you) or if you operate a non-routing host
- # which has several IP addresses on different interfaces. To
- # turn rp_filter off, uncomment the lines below:
- #if [ -r /proc/sys/net/ipv4/conf/all/rp_filter ]; then
- # echo "Disabling rp_filter."
- # echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
- #fi
-}
-
-# Stop IP packet forwarding:
-ip_forward_stop() {
- if [ -f /proc/sys/net/ipv4/ip_forward ]; then
- echo "Disabling IPv4 packet forwarding."
- echo 0 > /proc/sys/net/ipv4/ip_forward
- fi
-}
-
-# Restart IP packet forwarding:
-ip_forward_restart() {
- ip_forward_stop
- sleep 1
- ip_forward_start
-}
-
-case "$1" in
-'start')
- ip_forward_start
- ;;
-'stop')
- ip_forward_stop
- ;;
-'restart')
- ip_forward_restart
- ;;
-*)
- echo "usage $0 start|stop|restart"
-esac
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.local b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.local
deleted file mode 100755
index 3cf2076..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.local
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.local: Local system initialization script.
-#
-# Put any local setup commands in here:
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.mysqld b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.mysqld
deleted file mode 100644
index 239e2e6..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.mysqld
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/sh
-# Start/stop/restart mysqld.
-#
-# Copyright 2003 Patrick J. Volkerding, Concord, CA
-# Copyright 2003 Slackware Linux, Inc., Concord, CA
-#
-# This program comes with NO WARRANTY, to the extent permitted by law.
-# You may redistribute copies of this program under the terms of the
-# GNU General Public License.
-
-# To start MySQL automatically at boot, be sure this script is executable:
-# chmod 755 /etc/rc.d/rc.mysqld
-
-# Before you can run MySQL, you must have a database. To install an initial
-# database, do this as root:
-#
-# su - mysql
-# mysql_install_db
-#
-# Note that step one is becoming the mysql user. It's important to do this
-# before making any changes to the database, or mysqld won't be able to write
-# to it later (this can be fixed with 'chown -R mysql.mysql /var/lib/mysql').
-
-# To disallow outside connections to the database (if you don't need them, this
-# is recommended to increase security), uncomment the next line:
-#SKIP="--skip-networking"
-
-# Start mysqld:
-mysqld_start() {
- if [ -x /usr/bin/mysqld_safe ]; then
- # If there is an old PID file (no mysqld running), clean it up:
- if [ -r /var/run/mysql/mysql.pid ]; then
- if ! ps ax | grep mysqld 1> /dev/null 2> /dev/null ; then
- echo "Cleaning up old /var/run/mysql/mysql.pid."
- rm -f /var/run/mysql/mysql.pid
- fi
- fi
- /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid $SKIP &
- fi
-}
-
-# Stop mysqld:
-mysqld_stop() {
- # If there is no PID file, ignore this request...
- if [ -r /var/run/mysql/mysql.pid ]; then
- killall mysqld
- # Wait at least one minute for it to exit, as we don't know how big the DB is...
- for second in 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 \
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 60 ; do
- if [ ! -r /var/run/mysql/mysql.pid ]; then
- break;
- fi
- sleep 1
- done
- if [ "$second" = "60" ]; then
- echo "WARNING: Gave up waiting for mysqld to exit!"
- sleep 15
- fi
- fi
-}
-
-# Restart mysqld:
-mysqld_restart() {
- mysqld_stop
- mysqld_start
-}
-
-case "$1" in
-'start')
- mysqld_start
- ;;
-'stop')
- mysqld_stop
- ;;
-'restart')
- mysqld_restart
- ;;
-*)
- echo "usage $0 start|stop|restart"
-esac
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.postfix b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.postfix
deleted file mode 100644
index bc32367..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.postfix
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh
-#
-## Slackware init script for postfix
-## 20030828 Manolis Tzanidakis
-#
-
-postfix_start() {
- if [ -x /usr/sbin/postfix ]; then
- echo -n "Starting postfix MTA: "
- echo "/usr/sbin/postfix start"
- /usr/sbin/postfix start 2>/dev/null
- fi
-}
-
-postfix_stop() {
- /usr/sbin/postfix stop 2>/dev/null
-}
-
-postfix_restart() {
- sh $0 stop
- sleep 1
- sh $0 start
-}
-
-postfix_reload() {
- /usr/sbin/postfix reload 2>/dev/null
-}
-
-case "$1" in
- 'start')
- postfix_start
- ;;
- 'stop')
- postfix_stop
- ;;
- 'restart')
- postfix_restart
- ;;
- 'reload')
- postfix_reload
- ;;
- *)
- echo "usage $0 start|stop|restart|reload"
-esac
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sendmail b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sendmail
deleted file mode 100644
index 1a31c52..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sendmail
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-# Start/stop/restart sendmail.
-
-# Start sendmail:
-sendmail_start() {
- if [ -x /usr/sbin/sendmail ]; then
- echo "Starting sendmail MTA daemon: /usr/sbin/sendmail -L sm-mta -bd -q25m"
- /usr/sbin/sendmail -L sm-mta -bd -q25m
- echo "Starting sendmail MSP queue runner: /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m"
- /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m
- fi
-}
-
-# Stop sendmail:
-sendmail_stop() {
- killall sendmail
-}
-
-# Restart sendmail:
-sendmail_restart() {
- sendmail_stop
- sleep 1
- sendmail_start
-}
-
-case "$1" in
-'start')
- sendmail_start
- ;;
-'stop')
- sendmail_stop
- ;;
-'restart')
- sendmail_restart
- ;;
-*)
- echo "usage $0 start|stop|restart"
-esac
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.serial b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.serial
deleted file mode 100755
index 5f31c01..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.serial
+++ /dev/null
@@ -1,132 +0,0 @@
-#
-# /etc/rc.serial
-# Initializes the serial ports on your system
-#
-# chkconfig: 2345 50 75
-# description: This initializes the settings of the serial port
-#
-# FILE_VERSION: 19981128
-#
-# Distributed with setserial and the serial driver. We need to use the
-# FILE_VERSION field to assure that we don't overwrite a newer rc.serial
-# file with a newer one.
-#
-# XXXX For now, the autosave feature doesn't work if you are
-# using the multiport feature; it doesn't save the multiport configuration
-# (for now). Autosave also doesn't work for the hayes devices.
-#
-
-RCLOCKFILE=/var/lock/subsys/serial
-DIRS="/lib/modules/`uname -r`/misc /lib/modules /usr/lib/modules ."
-PATH=/bin:/sbin:/usr/bin
-DRIVER=serial
-DRIVER_NAME=serial
-MODULE_REGEXP="serial\b"
-
-ALLDEVS="/dev/ttyS?"
-if /bin/ls /dev/ttyS?? >& /dev/null ; then
- ALLDEVS="$ALLDEVS /dev/ttyS??"
-fi
-
-SETSERIAL=""
-if test -x /bin/setserial ; then
- SETSERIAL=/bin/setserial
-elif test -x /sbin/setserial ; then
- SETSERIAL=/sbin/setserial
-fi
-
-#
-# See if the serial driver is loaded
-#
-LOADED=""
-if test -f /proc/devices; then
- if grep -q " ttyS$" /proc/devices ; then
- LOADED="yes"
- else
- LOADED="no"
- fi
-fi
-
-#
-# Find the serial driver
-#
-for i in $DIRS
-do
- if test -z "$MODULE" -a -f $i/$DRIVER.o ; then
- MODULE=$i/$DRIVER.o
- fi
-done
-
-if ! test -f /proc/modules ; then
- MODULE=""
-fi
-
-#
-# Handle System V init conventions...
-#
-case $1 in
-start)
- action="start";
- ;;
-stop)
- action="stop";
- ;;
-*)
- action="start";
-esac
-
-if test $action = stop ; then
- if test -n ${SETSERIAL} -a "$LOADED" != "no" -a \
- `head -1 /etc/serial.conf`X = "###AUTOSAVE###X" ; then
- echo -n "Saving state of serial devices... "
- grep "^#" /etc/serial.conf > /etc/.serial.conf.new
- ${SETSERIAL} -G -g ${ALLDEVS} >> /etc/.serial.conf.new
- mv /etc/serial.conf /etc/.serial.conf.old
- mv /etc/.serial.conf.new /etc/serial.conf
- echo "done."
- fi
- if test -n "$MODULE" ; then
- module=`grep $MODULE_REGEXP /proc/modules | awk '{print $1}'`
- if test -z "$module" ; then
- echo "The $DRIVER_NAME driver is not loaded."
- rm -f ${RCLOCKFILE}
- exit 0
- fi
- if rmmod $module ; then :; else
- echo "The $DRIVER_NAME driver could NOT be unloaded."
- exit 1;
- fi
- echo "The $DRIVER_NAME driver has been unloaded."
- fi
- rm -f ${RCLOCKFILE}
- exit 0
-fi
-
-#
-# If not stop, it must be a start....
-#
-
-if test -n "$MODULE" -a "$LOADED" != "yes" ; then
- if insmod -f $MODULE $DRIVER_ARG ; then
- true
- else
- echo "Couldn't load $DRIVER_NAME driver."
- exit 1
- fi
-fi
-
-if test -f /etc/serial.conf ; then
- if test -n ${SETSERIAL} ; then
- grep -v ^# < /etc/serial.conf | while read device args
- do
- if [ ! "$device" = "" -a ! "$args" = "" ]; then
- ${SETSERIAL} -z $device $args
- fi
- done
- fi
-else
- echo "###AUTOSAVE###" > /etc/serial.conf
-fi
-
-touch ${RCLOCKFILE}
-${SETSERIAL} -bg ${ALLDEVS}
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sshd b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sshd
deleted file mode 100755
index a3707e3..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sshd
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/sh
-# Start/stop/restart the secure shell server:
-
-sshd_start() {
- # Create host keys if needed.
- if [ ! -r /etc/ssh/ssh_host_key ]; then
- /usr/bin/ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N ''
- fi
- if [ ! -f /etc/ssh/ssh_host_dsa_key ]; then
- /usr/bin/ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N ''
- fi
- if [ ! -f /etc/ssh/ssh_host_rsa_key ]; then
- /usr/bin/ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N ''
- fi
- /usr/sbin/sshd
-}
-
-sshd_stop() {
- killall sshd
-}
-
-sshd_restart() {
- if [ -r /var/run/sshd.pid ]; then
- echo "WARNING: killing listener process only. To kill every sshd process, you must"
- echo " use 'rc.sshd stop'. 'rc.sshd restart' kills only the parent sshd to"
- echo " allow an admin logged in through sshd to use 'rc.sshd restart' without"
- echo " being cut off. If sshd has been upgraded, new connections will now"
- echo " use the new version, which should be a safe enough approach."
- kill `cat /var/run/sshd.pid`
- else
- killall sshd
- fi
- sleep 1
- sshd_start
-}
-
-case "$1" in
-'start')
- sshd_start
- ;;
-'stop')
- sshd_stop
- ;;
-'restart')
- sshd_restart
- ;;
-*)
- echo "usage $0 start|stop|restart"
-esac
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.syslog b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.syslog
deleted file mode 100755
index a005fb7..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.syslog
+++ /dev/null
@@ -1,42 +0,0 @@
-#!/bin/sh
-# Start/stop/restart the system logging daemons.
-#
-# Written for Slackware Linux by Patrick J. Volkerding <volkerdi@slackware.com>.
-
-syslogd_start() {
- if [ -x /usr/sbin/syslogd -a -x /usr/sbin/klogd ]; then
- echo -n "Starting sysklogd daemons: "
- echo -n "/usr/sbin/syslogd "
- /usr/sbin/syslogd
- sleep 1 # prevent syslogd/klogd race condition on SMP kernels
- echo "/usr/sbin/klogd -c 3 -x"
- # '-c 3' = display level 'error' or higher messages on console
- # '-x' = turn off broken EIP translation
- /usr/sbin/klogd -c 3 -x
- fi
-}
-
-syslogd_stop() {
- killall syslogd 2> /dev/null
- killall klogd 2> /dev/null
-}
-
-syslogd_restart() {
- syslogd_stop
- sleep 1
- syslogd_start
-}
-
-case "$1" in
-'start')
- syslogd_start
- ;;
-'stop')
- syslogd_stop
- ;;
-'restart')
- syslogd_restart
- ;;
-*)
- echo "usage $0 start|stop|restart"
-esac
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sysvinit b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sysvinit
deleted file mode 100755
index 916e59e..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.sysvinit
+++ /dev/null
@@ -1,58 +0,0 @@
-#!/bin/sh
-#
-# rc.sysvinit This file provides basic compatibility with SystemV style
-# startup scripts. The SystemV style init system places
-# start/stop scripts for each runlevel into directories such as
-# /etc/rc.d/rc3.d/ (for runlevel 3) instead of starting them
-# from /etc/rc.d/rc.M. This makes for a lot more init scripts,
-# and a more complicated execution path to follow through if
-# something goes wrong. For this reason, Slackware has always
-# used the traditional BSD style init script layout.
-#
-# However, many binary packages exist that install SystemV
-# init scripts. With rc.sysvinit in place, most well-written
-# startup scripts will work. This is primarily intended to
-# support commercial software, though, and probably shouldn't
-# be considered bug free.
-#
-# Written by Patrick Volkerding <volkerdi@slackware.com>, 1999
-# from an example by Miquel van Smoorenburg <miquels@cistron.nl>.
-
-# Run an init script:
-startup() {
- case "$1" in
- *.sh)
- sh "$@"
- ;;
- *)
- "$@"
- ;;
- esac
-}
-
-# Set onlcr to avoid staircase effect.
-stty onlcr 0>&1
-
-if [ "$runlevel" = "" ]; then
- runlevel=$RUNLEVEL
- export runlevel
- prevlevel=$PREVLEVEL
- export prevlevel
-fi
-
-# Run kill scripts in the previous runlevel if not "none"
-if [ ! "$prevlevel" = "N" ]; then
- for script in /etc/rc.d/rc$prevlevel.d/K* ; do
- if [ -x $script ]; then
- startup $script stop
- fi
- done
-fi
-
-# Now do the startup scripts:
-for script in /etc/rc.d/rc$runlevel.d/S* ; do
- if [ -x $script ]; then
- startup $script start
- fi
-done
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rssh.conf b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rssh.conf
deleted file mode 100644
index a74acc6..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/rssh.conf
+++ /dev/null
@@ -1,48 +0,0 @@
-# This is the default rssh config file
-
-# set the log facility. "LOG_USER" and "user" are equivalent.
-logfacility = LOG_USER
-
-# Leave these all commented out to make the default action for rssh to lock
-# users out completely...
-
-allowscp
-allowsftp
-#allowcvs
-#allowrdist
-#allowrsync
-
-# set the default umask
-umask = 022
-
-# If you want to chroot users, use this to set the directory where the root of
-# the chroot jail will be located.
-#
-# if you DO NOT want to chroot users, LEAVE THIS COMMENTED OUT.
-# You can quote anywhere, but quotes not required unless path contains a
-# space... as in this example.
-
-chrootpath = "/var/users"
-
-##########################################
-# EXAMPLES of configuring per-user options
-
-#user=rudy:077:00010: # the path can simply be left out to not chroot
-#user=rudy:077:00010 # the ending colon is optional
-
-#spaces in the path must be quoted...
-#user=rudy:011:00001:"/usr/local/chroot dir" # scp with chroot
-#user=rudy:011:00010:"/usr/local/chroot dir" # sftp with chroot
-#user=rudy:011:00011:"/usr/local/chroot dir" # both with chroot
-#user=rudy:011:00100: # cvs, with no chroot
-#user=rudy:011:01000: # rdist, with no chroot
-#user=rudy:011:10000: # rsync, with no chroot
-#user="rudy:011:00001:/usr/local/chroot" # whole user string can be quoted
-#user=rudy:01"1:00001:/usr/local/chroot" # or somewhere in the middle, freak!
-#user=rudy:'011:00001:/usr/local/chroot' # single quotes too
-
-# Spaces before or after the '=' are fine, but spaces in chrootpath need
-# quotes.
-#user = "rudy:011:00001:/usr/local/chroot dir"
-#user = "rudy:011:00001:/usr/local/chroot dir" # neither do comments at line end
-
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/ssh/sshd_config b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/ssh/sshd_config
deleted file mode 100644
index a161fec..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/etc/ssh/sshd_config
+++ /dev/null
@@ -1,103 +0,0 @@
-# $OpenBSD: sshd_config,v 1.69 2004/05/23 23:59:53 dtucker Exp $
-
-# This is the sshd server system-wide configuration file. See
-# sshd_config(5) for more information.
-
-# This sshd was compiled with PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
-
-# The strategy used for options in the default sshd_config shipped with
-# OpenSSH is to specify options with their default value where
-# possible, but leave them commented. Uncommented options change a
-# default value.
-
-#Port 22
-#Protocol 2,1
-#ListenAddress 0.0.0.0
-#ListenAddress ::
-
-# HostKey for protocol version 1
-#HostKey /etc/ssh/ssh_host_key
-# HostKeys for protocol version 2
-#HostKey /etc/ssh/ssh_host_rsa_key
-#HostKey /etc/ssh/ssh_host_dsa_key
-
-# Lifetime and size of ephemeral version 1 server key
-#KeyRegenerationInterval 1h
-#ServerKeyBits 768
-
-# Logging
-#obsoletes QuietMode and FascistLogging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2m
-PermitRootLogin no
-#StrictModes yes
-#MaxAuthTries 6
-
-#RSAAuthentication yes
-#PubkeyAuthentication yes
-#AuthorizedKeysFile .ssh/authorized_keys
-
-# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#RhostsRSAAuthentication no
-# similar for protocol version 2
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# RhostsRSAAuthentication and HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-#PasswordAuthentication yes
-#PermitEmptyPasswords no
-
-# Change to no to disable s/key passwords
-#ChallengeResponseAuthentication yes
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication mechanism.
-# Depending on your PAM configuration, this may bypass the setting of
-# PasswordAuthentication, PermitEmptyPasswords, and
-# "PermitRootLogin without-password". If you just want the PAM account and
-# session checks to run without PAM authentication, then enable this but set
-# ChallengeResponseAuthentication=no
-#UsePAM no
-
-#AllowTcpForwarding yes
-#GatewayPorts no
-#X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PrintMotd yes
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#UsePrivilegeSeparation yes
-#PermitUserEnvironment no
-#Compression yes
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS yes
-#PidFile /var/run/sshd.pid
-#MaxStartups 10
-
-# no default banner path
-#Banner /some/path
-
-# override default of no subsystems
-Subsystem sftp /usr/libexec/sftp-server
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/var/www/htdocs/missing.html b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/var/www/htdocs/missing.html
deleted file mode 100644
index b2eec17..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/var/www/htdocs/missing.html
+++ /dev/null
@@ -1,12 +0,0 @@
-<html>
-<head>
-<title>404 - Not Found</title>
-</head>
-<body>
- <center>
- <pre>
- O endere&ccedil;o que voc&ecirc; requisitou n&atilde;o p&ocirc;de ser encontrado :(
- </pre>
- </center>
-</body>
-</html>
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/var/www/missing.html b/branches/0.6/templates/vserver-legacy/vserver-legacy.d/var/www/missing.html
deleted file mode 100644
index b2eec17..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.d/var/www/missing.html
+++ /dev/null
@@ -1,12 +0,0 @@
-<html>
-<head>
-<title>404 - Not Found</title>
-</head>
-<body>
- <center>
- <pre>
- O endere&ccedil;o que voc&ecirc; requisitou n&atilde;o p&ocirc;de ser encontrado :(
- </pre>
- </center>
-</body>
-</html>
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.perms b/branches/0.6/templates/vserver-legacy/vserver-legacy.perms
deleted file mode 100644
index a323d6c..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.perms
+++ /dev/null
@@ -1,36 +0,0 @@
-./etc;0;0;755
-./etc/apache;0;0;755
-./etc/apache/httpd.conf;0;0;644
-./etc/apache/php.ini;0;0;644
-./etc/apache/vhosts;0;0;644
-./etc/logrotate.d;0;0;755
-./etc/logrotate.d/apache;0;0;644
-./etc/rc.d;0;0;755
-./etc/rc.d/rc.httpd;0;0;644
-./etc/rc.d/rc.0;0;0;755
-./etc/rc.d/rc.4;0;0;644
-./etc/rc.d/rc.6;0;0;755
-./etc/rc.d/rc.K;0;0;755
-./etc/rc.d/rc.M;0;0;755
-./etc/rc.d/rc.S;0;0;755
-./etc/rc.d/rc.ip_forward;0;0;644
-./etc/rc.d/rc.inet2;0;0;755
-./etc/rc.d/rc.inetd;0;0;644
-./etc/rc.d/rc.mysqld;0;0;644
-./etc/rc.d/rc.local;0;0;755
-./etc/rc.d/rc.postfix;0;0;644
-./etc/rc.d/rc.sendmail;0;0;644
-./etc/rc.d/rc.serial;0;0;755
-./etc/rc.d/rc.sshd;0;0;755
-./etc/rc.d/rc.syslog;0;0;755
-./etc/rc.d/rc.sysvinit;0;0;755
-./etc/ssh;0;0;755
-./etc/ssh/sshd_config;0;0;644
-./etc/rssh.conf;0;0;644
-./etc/hosts;0;0;644
-./etc/profile;0;0;644
-./var;0;0;755
-./var/www;0;0;755
-./var/www/htdocs;0;0;755
-./var/www/htdocs/missing.html;0;0;644
-./var/www/missing.html;0;0;644
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.s/GPG-KEY b/branches/0.6/templates/vserver-legacy/vserver-legacy.s/GPG-KEY
deleted file mode 100644
index fd23e95..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.s/GPG-KEY
+++ /dev/null
@@ -1,88 +0,0 @@
-security@slackware.com public key
-
-Type bits/keyID Date User ID
-pub 1024D/40102233 2003-02-26 Slackware Linux Project <security@slackware.com>
-sub 1024g/4E523569 2003-02-26 [expires: 2012-12-21]
-
------BEGIN PGP PUBLIC KEY BLOCK-----
-Version: GnuPG v1.2.1 (GNU/Linux)
-
-mQGiBD5dIFQRBADB31WinbXdaGk/8RNkpnZclu1w3Xmd5ItACDLB2FhOhArw35EA
-MOYzxI0gRtDNWN4pn9n74q4HbFzyRWElThWRtBTYLEpImzrk7HYVCjMxjw5A0fTr
-88aiHOth5aS0vPAoq+3TYn6JDSipf2bR03G2JVwgj3Iu066pX4naivNm8wCgldHG
-F3y9vT3UPYh3QFgEUlCalt0D/3n6NopRYy0hMN6BPu+NarXwv6NQ9g0GV5FNjEEr
-igkrD/htqCyWAUl8zyCKKUFZZx4UGBRZ5guCdNzwgYH3yn3aVMhJYQ6tcSlLsj3f
-JIz4LAZ3+rI77rbn7gHHdp7CSAuV+QHv3aNanUD/KGz5SPSvF4w+5qRM4PfPNT1h
-LMV8BACzxiyX7vzeE4ZxNYvcuCtv0mvEHl9yD66NFA35RvXaO0QiRVYeoUa5JOQZ
-gwq+fIB0zgsEYDhXFkC1hM/QL4NccMRk8C09nFn4eiz4dAEnwKt4rLCJKhkLl1DW
-TSoXHe/dOXaLnFyLzB1J8hEYmUvw3SwPt//wMqDiVBLeZfFcdLQwU2xhY2t3YXJl
-IExpbnV4IFByb2plY3QgPHNlY3VyaXR5QHNsYWNrd2FyZS5jb20+iF8EExECAB8F
-Aj5dIFQFCRJ3owAECwcDAgMVAgMDFgIBAh4BAheAAAoJEGpEY8BAECIzee0An3My
-boalJ5nLePD0HCzMuf8Ix8gPAJ9lnU1wqNVGza0t89ACTurDoppQ2rkBDQQ+XSBV
-EAQA3VYlpPyRKdOKoM6t1SwNG0YgVFSvxy/eiratBf7misDBsJeH86Pf8H9OfVHO
-cqscLiC+iqvDgqeTUX9vASjlnvcoS/3H5TDPlxiifIDggqd2euNtJ8+lyXRBV6yP
-sBIA6zki9cR4zphe48hKpSsDfj7uL5sfyc2UmKKboSu3x7cAAwUD/1jmoLQs9bIt
-bTosoy+5+Uzrl0ShRlv+iZV8RPzAMFuRJNxUJkUmmThowtXRaPKFI9AVd+pP44aA
-J+zxCPtS2isiW20AxubJoBPpXcVatJWi4sG+TM5Z5VRoLg7tIDNVWsyHGXPAhIG2
-Y8Z1kyWwb4P8A/W2b1ZCqS7Fx4yEhTikiEwEGBECAAwFAj5dIFUFCRJ3owAACgkQ
-akRjwEAQIjM1uwCdE7V4mPCqdby/nV699NxKX0iW/OsAniaVhEip8Ptff74Sv4JV
-tb+Sth2l
-=H5uu
------END PGP PUBLIC KEY BLOCK-----
-
-slamd64 public key
-
------BEGIN PGP PUBLIC KEY BLOCK-----
-Version: GnuPG v1.2.6 (GNU/Linux)
-
-mQGiBELKSBYRBACiElxGMXqxUwdsQBKPngV6/k0Q5AYT34+WLL0B7XRR9kOotCfc
-PTLCP5qLM9etpzKhbMbgWGpaBrA/3KEPOJ7JVhk6JcLgjoi0QsMusaI4BGnmrxkw
-3mh9xPwc+jPgiYOljbZhNG6FMQtrdlKYV+BmwS8mt/YBymShghtlgdHJjwCg/PAG
-YJDsfoG1ebuwcjYlsGoD2x0EAJX7UnTdxxESvmIuk172MunZqw+o8+o/W684z13/
-wOkcVqvuAcd0ejuY0z09GFfyhtig8E55UcKNyVC50+3aJUXlt9//HnENHZo+OEN1
-ezbOXUcJIw8xkU551qaxubqWXtKYEJP9z/khVPe4N0JW2vWOcAFYhuOEx1ylaNrX
-gUY4BACDpn+pntq0ooZqkSPT4v1ibOQg/3xh2F1PgsnOahMRrXbVEdL9ItsVnHM/
-ygHBjLhkEMd612nVVSw1BYMBAwQbsYB8Lgn1QxXl0ISBYR1RYW1LvyaJM6A6TDL+
-EdWp+iTtlKOe/VD+oCfHmMONoucZJM2AtK1vXTX3x4Wb4MgVdLQoRnJlZGVyaWNr
-IEVtbW90dCA8bWFpbEBmcmVkZW1tb3R0LmNvLnVrPohkBBMRAgAkBQJCykgWAhsD
-BQkDwmcABgsJCAcDAgMVAgMDFgIBAh4BAheAAAoJEAd5Da1T/acLGfIAoOqIHrg4
-r2pq/tKi9VifOJS1xg4LAKDpi0I0pzsdDJ2owxCQ88MkoSDKgohMBBARAgAMBQJD
-Ed/tBYMDes8pAAoJEFgpV1AFAIOLprQAnRDVVmDPnzVNOWrZ8D55gG2bOwkxAKCl
-dGThnu0aQ0IEL7MgUETGtk4hS4iiBBABAgAMBQJDEdpDBYMDetTTAAoJEJugaRW/
-hasxqCwEAKczPTgOrRXXTs4piB14DayJQVgoqVgiNfKzd5qVuvQgYebQrMu7hi5U
-0q/n6TbQpjmMDZKxhXhEY1gs32mtzKKDrerTpF+pJAgQVvBLZS2mF4HbVnU74GvL
-2UKJtEtgb9u+i1Efd4Q8GIJUzLLJifURQWTk1e3B9qGApKXpWJlviEwEEBECAAwF
-AkMR75MFgwN6v4MACgkQTqjEwhXvPN1j7gCbBXZs9MM6YXGI/yTlEhiXyTECxm8A
-nj6O1XszSa5kaD7CvnRFzNkm5O5MiEwEEBECAAwFAkMR79UFgwN6v0EACgkQoLYC
-8AehV8eLBQCgv8WEdBtFjTh3Wl06WK5dKCw0nHsAn0IIHRbJC5jO4NWrIpupBMnz
-3fBsiEwEExECAAwFAkMR9ggFgwN6uQ4ACgkQR+ny47i1wzAfZQCfRACyfYBxs+tu
-6OzpLP2DGjEaa1UAnj4MVMH32f/34oN6o9dPKPT8HXWziEwEExECAAwFAkMR9vcF
-gwN6uB8ACgkQB0u7y43syeIaogCfVy7lqRjRDbttJs1u1g3FekdbJ1kAnRo726tA
-u8Xf+JWD3OrmMo0Uup3giEwEEBECAAwFAkMR+qgFgwN6tG4ACgkQfWXW5We1ioQk
-tgCePGa3NpcfEWb8drmO95Mp1C+FaBIAoNEqA89xUvTIpqooucTzFxgAupVgiEwE
-EBECAAwFAkMSF+UFgwN6lzEACgkQ/lREvmcCFhscDQCgnMxf4Nmu3B41GWupTWxb
-9b+te5sAoIiTZHzOSKtqN4cJ2i22iP/vZPt4iEwEEBECAAwFAkMULeAFgwN4gTYA
-CgkQsxZ93p+gHn6bcACgwY/5ZpvvEK+eycM5XNQhVI6w4j8An0JoXlFaGStIzUmW
-42obaW6CG4WViEYEExECAAYFAkMUZuAACgkQGnR+RTDgudhG1QCeJelEhnX/3JeW
-S5BaM7640suSeLQAnA2RDMH4zIJLI4MWEXBAvaA0lSr7iEwEEBECAAwFAkMUP8gF
-gwN4b04ACgkQM/XwBW70U1iAOwCgmah/GnZikIhyeFr6KsKpsmZCQTQAn3Vs7JZm
-w4qBLiI+RXxw7vIJlI4AiEwEEBECAAwFAkMUZ9EFgwN4R0UACgkQ72KcVAmwbhAC
-FACgiNqao9mzAWZBjIY7iiqz34gbK/QAn34F1bLAb0sHKiSUcFkVi/uZ8R0viEwE
-EBECAAwFAkMWFj8FgwN2mNcACgkQn3j4POjENGF+UgCeM+mEKW5+MjNN17QCAvZi
-cBVJEHMAn14YyvdSIwBBFUNPWYOw7GwYyAhHiEwEEBECAAwFAkMXW0cFgwN1U88A
-CgkQTxqZjtpq5iG4PwCfe2ymOYh5t+bEZGGCtJg3sWJ5hHYAmQGS+jGWcTMlXSe+
-65o/aPfLUkMQuQINBELKSCgQCADjG+pX7C0sRIkX1QQ6lFW3IrajWypXtd4jO1TA
-dlLFES7OxF202V15+TRtL9NO34x7u6RPTnF7wi/i2U1dqM9ZjrFcTJA17Y7+OLH+
-yw64/5OJapUi48qI7hnLRTPykz0c+b92pUt1X/BIWmf301jbZ0AbFZV4yvm1OUH4
-wrGLLFeATjiBWTcJarRiR89DzQ/Cm+c791WXdIhEvv5Vp4/d8HzGZhEUVKTCoA3e
-Z8ZIdJoy/d7FYfyeg836UDXEqr598n2p9DxMwkRj5oHINB64CrQuKr7zDdP8Zv2g
-vKkjeS4mN+07saWK3UTY5ADByNVHSu+P0LZYPhxjze7KOVjHAAUTCACa5ohR/7/N
-x2M2OB9VPAwQPjAFNst6fPotcFLDy5Q/jlbBcDNf1OdzgkE/06z7iPGRmIJL6flz
-QZH+hYwDqjulVVtPQXiZMVGvlfC9YIAdJX/1Ca2L9mL4c4IBQbFNkSlgkLaPTwUJ
-BD2PnA+q+ERy39UANhIR/LVGltK1krDds8CwbxMSYNFvFgf4dmh6GzI5ioByDoTM
-8ShfS2GjAekviNVLsGC5UWKuQl/XVaC/j7CTAT7WbikfXWI2uonFBx47vjf2UaPa
-E0HnAVwDY0cAZeaObpDKvyogsf8H4CzK9JCKtW9aTUpKurEpyHfcKqB07GMLC/+Q
-QiA3bFmrSaTRiE8EGBECAA8FAkLKSCgCGwwFCQPCZwAACgkQB3kNrVP9pwsejwCg
-gaQm6lU/H7ja0EUaJJFZnRoqRvAAnRK8CC4PIr/ZYDjd+aeS3R31FjGr
-=D1wm
------END PGP PUBLIC KEY BLOCK-----
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.s/devices.tar.gz b/branches/0.6/templates/vserver-legacy/vserver-legacy.s/devices.tar.gz
deleted file mode 100644
index 992ba79..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.s/devices.tar.gz
+++ /dev/null
Binary files differ
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.s/skel.conf b/branches/0.6/templates/vserver-legacy/vserver-legacy.s/skel.conf
deleted file mode 100644
index 73985d3..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.s/skel.conf
+++ /dev/null
@@ -1,70 +0,0 @@
-if [ "" = "" ] ; then
-PROFILE=prod
-fi
-# Select the IP number assigned to the virtual server
-# This IP must be one IP of the server, either an interface
-# or an IP alias
-# A vserver may have more than one IP. Separate them with spaces.
-# do not forget double quotes.
-# Some examples:
-# IPROOT="1.2.3.4 2.3.4.5"
-# IPROOT="eth0:1.2.3.4 eth1:2.3.4.5"
-# If the device is not specified, IPROOTDEV is used
-case $PROFILE in
-prod)
-#IPROOT=143.106.35.156
-IPROOT="eth0:192.168.0.1"
-# The netmask and broadcast are computed by default from IPROOTDEV
-#IPROOTMASK=
-#IPROOTBCAST=
-# You can define on which device the IP alias will be done
-# The IP alias will be set when the server is started and unset
-# when the server is stopped
-#IPROOTDEV=eth0
-# You can set a different host name for the vserver
-# If empty, the host name of the main server is used
-S_HOSTNAME=skel
-;;
-backup)
-IPROOT=1.2.3.4
-#IPROOTMASK=
-#IPROOTBCAST=
-#IPROOTDEV=eth0
-S_HOSTNAME=
-;;
-esac
-# Uncomment the onboot line if you want to enable this
-# virtual server at boot time
-#ONBOOT=yes
-# You can set a different NIS domain for the vserver
-# If empty, the current on is kept
-# Set it to "none" to have no NIS domain set
-S_DOMAINNAME=
-# You can set the priority level (nice) of all process in the vserver
-# Even root won't be able to raise it
-S_NICE=
-# You can set various flags for the new security context
-# lock: Prevent the vserver from setting new security context
-# sched: Merge scheduler priority of all processes in the vserver
-# so that it acts a like a single one.
-# nproc: Limit the number of processes in the vserver according to ulimit
-# (instead of a per user limit, this becomes a per vserver limit)
-# private: No other process can join this security context. Even root
-# Do not forget the quotes around the flags
-S_FLAGS="lock nproc"
-# You can set various ulimit flags and they will be inherited by the
-# vserver. You enter here various command line argument of ulimit
-# ULIMIT="-HS -u 200"
-# The example above, combined with the nproc S_FLAGS will limit the
-# vserver to a maximum of 200 processes
-ULIMIT="-HS -u 1000"
-# You can set various capabilities. By default, the vserver are run
-# with a limited set, so you can let root run in a vserver and not
-# worry about it. He can't take over the machine. In some cases
-# you can to give a little more capabilities (such as CAP_NET_RAW)
-# S_CAPS="CAP_NET_RAW"
-S_CAPS="CAP_SETGID"
-# Select an unused context (this is optional)
-# The default is to allocate a free context on the fly
-# In general you don't need to force a context
-#S_CONTEXT=
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.s/vserver-legacy.sh b/branches/0.6/templates/vserver-legacy/vserver-legacy.s/vserver-legacy.sh
deleted file mode 100644
index 4ce8a4b..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.s/vserver-legacy.sh
+++ /dev/null
@@ -1,49 +0,0 @@
-#!/bin/bash
-#
-# legacy vserver template
-#
-
-BASE="/etc/simplepkg/templates/vserver-legacy/vserver-legacy.s/"
-DEVICES="$BASE/devices.tar.gz"
-GPGKEY="$BASE/GPG-KEY"
-SKEL="$BASE/skel.conf"
-
-if [ -z "$2" ]; then
- echo "usage: `basename $0` <jail-root> <jail-name>"
- exit 1
-elif [ ! -d "$1/$2" ]; then
- echo "folder $1/$2 does not exist"
- exit 1
-fi
-
-cp /etc/resolv.conf $1/$2/etc/
-cp /etc/localtime $1/$2/etc/
-echo /dev/hdv1 / ext2 defaults 1 1 > $1/$2/etc/fstab
-echo /dev/hdv1 / ext2 rw 0 0 > $1/$2/etc/mtab
-
-echo "creating devices and dependencies"
-if [ -f "$DEVICES" ]; then
- cd $1/$2/
- tar zxvf $DEVICES
- chroot $1/$2/ sbin/ldconfig
-else
- echo error: device template $DEVICES not found
-fi
-
-if [ -f "$SKEL" ]; then
- echo "creating /etc/vservers/$2.conf"
- mkdir -p /etc/vservers
- cp $SKEL /etc/vservers/$2.conf
-else
- echo error: config file template $SKEL not found
-fi
-
-if [ -f "$GPGKEY" ]; then
- echo "importing slack gpg pubkey"
- mkdir $1/$2/root/.gnupg
- gpg --homedir $1/$2/root/.gnupg --import $GPGKEY
-fi
-
-echo "done; now edit /etc/vservers/$2.conf"
-echo "then, set all desired iptables rules and start $server vserver"
-echo "dont forget to change root's password with the command "vserver $2 exec passwd""
diff --git a/branches/0.6/templates/vserver-legacy/vserver-legacy.template b/branches/0.6/templates/vserver-legacy/vserver-legacy.template
deleted file mode 100644
index b810e32..0000000
--- a/branches/0.6/templates/vserver-legacy/vserver-legacy.template
+++ /dev/null
@@ -1,251 +0,0 @@
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: A1 (Base Linux series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-#
-#
-aaa_base: ADD
-aaa_elflibs: ADD
-bash: ADD
-bin: ADD
-bzip2: ADD
-coreutils: ADD
-cxxlibs: ADD
-dcron: ADD
-elvis: ADD
-etc: ADD
-findutils: ADD
-gawk: ADD
-gettext: REC
-grep: ADD
-gzip: ADD
-infozip: ADD
-less: ADD
-logrotate: ADD
-openssl-solibs: ADD
-pkgtools: ADD
-procps: ADD
-sed: ADD
-shadow: ADD
-slocate: ADD
-sysklogd: ADD
-sysvinit: ADD
-tar: ADD
-util-linux: ADD
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: AP1 (Applications series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-#
-#
-bc: OPT
-diffutils: REC
-jed: OPT
-joe: OPT
-jove: OPT
-lsof: OPT
-mysql: OPT
-sudo: OPT
-vim: OPT
-# Tagfile for emacs series
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: F1 (Frequently Asked Questions)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-#
-#
-libidn: REC
-libxml2: REC
-mhash: REC
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from the N (Network/UUCP/Mail/News) series.
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-#
-apache: OPT
-curl: OPT
-gnupg: OPT
-htdig: OPT
-inetd: REC
-lftp: OPT
-lynx: OPT
-mod_ssl: OPT
-nail: REC
-openssh: REC
-openssl: REC
-php: OPT
-rsync: OPT
-stunnel: OPT
-tcpip: REC
-wget: OPT
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: TCL1 (Tcl/Tk series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-#
-#
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: Y1 (Yaaaaaahhoooo? Games and Amusements).
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-# extra
-libsafe
-# contrib
-simplepkg
-ssmtp
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/apache/httpd.conf b/branches/0.6/templates/vserver/vserver.d/etc/apache/httpd.conf
deleted file mode 100644
index 7b7115d..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/apache/httpd.conf
+++ /dev/null
@@ -1,1046 +0,0 @@
-##
-## httpd.conf -- Apache HTTP server configuration file
-##
-
-#
-# Based upon the NCSA server configuration files originally by Rob McCool.
-#
-# This is the main Apache server configuration file. It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs/> for detailed information about
-# the directives.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do. They're here only as hints or reminders. If you are unsure
-# consult the online docs. You have been warned.
-#
-# After this file is processed, the server will look for and process
-# /etc/apache/srm.conf and then /etc/apache/access.conf
-# unless you have overridden these with ResourceConfig and/or
-# AccessConfig directives here.
-#
-# The configuration directives are grouped into three basic sections:
-# 1. Directives that control the operation of the Apache server process as a
-# whole (the 'global environment').
-# 2. Directives that define the parameters of the 'main' or 'default' server,
-# which responds to requests that aren't handled by a virtual host.
-# These directives also provide default values for the settings
-# of all virtual hosts.
-# 3. Settings for virtual hosts, which allow Web requests to be sent to
-# different IP addresses or hostnames and have them handled by the
-# same Apache server process.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path. If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
-# with ServerRoot set to "/usr/local/apache" will be interpreted by the
-# server as "/usr/local/apache/logs/foo.log".
-#
-
-### Section 1: Global Environment
-#
-# The directives in this section affect the overall operation of Apache,
-# such as the number of concurrent requests it can handle or where it
-# can find its configuration files.
-#
-
-#
-# ServerType is either inetd, or standalone. Inetd mode is only supported on
-# Unix platforms.
-#
-ServerType standalone
-
-# ServerTokens directive
-ServerTokens ProductOnly
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# NOTE! If you intend to place this on an NFS (or otherwise network)
-# mounted filesystem then please read the LockFile documentation
-# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
-# you will save yourself a lot of trouble.
-#
-ServerRoot "/usr"
-
-#
-# The LockFile directive sets the path to the lockfile used when Apache
-# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
-# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
-# its default value. The main reason for changing it is if the logs
-# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
-# DISK. The PID of the main server process is automatically appended to
-# the filename.
-#
-#LockFile /var/run/httpd.lock
-
-#
-# PidFile: The file in which the server should record its process
-# identification number when it starts.
-#
-PidFile /var/run/httpd.pid
-
-#
-# ScoreBoardFile: File used to store internal server process information.
-# Not all architectures require this. But if yours does (you'll know because
-# this file will be created when you run Apache) then you *must* ensure that
-# no two invocations of Apache share the same scoreboard file.
-#
-ScoreBoardFile /var/run/httpd.scoreboard
-
-#
-# In the standard configuration, the server will process httpd.conf (this
-# file, specified by the -f command line option), srm.conf, and access.conf
-# in that order. The latter two files are now distributed empty, as it is
-# recommended that all directives be kept in a single file for simplicity.
-# The commented-out values below are the built-in defaults. You can have the
-# server ignore these files altogether by using "/dev/null" (for Unix) or
-# "nul" (for Win32) for the arguments to the directives.
-#
-#ResourceConfig /etc/apache/srm.conf
-#AccessConfig /etc/apache/access.conf
-
-#
-# Timeout: The number of seconds before receives and sends time out.
-#
-Timeout 300
-
-#
-# KeepAlive: Whether or not to allow persistent connections (more than
-# one request per connection). Set to "Off" to deactivate.
-#
-KeepAlive On
-
-#
-# MaxKeepAliveRequests: The maximum number of requests to allow
-# during a persistent connection. Set to 0 to allow an unlimited amount.
-# We recommend you leave this number high, for maximum performance.
-#
-MaxKeepAliveRequests 100
-
-#
-# KeepAliveTimeout: Number of seconds to wait for the next request from the
-# same client on the same connection.
-#
-KeepAliveTimeout 2
-
-#
-# Server-pool size regulation. Rather than making you guess how many
-# server processes you need, Apache dynamically adapts to the load it
-# sees --- that is, it tries to maintain enough server processes to
-# handle the current load, plus a few spare servers to handle transient
-# load spikes (e.g., multiple simultaneous requests from a single
-# Netscape browser).
-#
-# It does this by periodically checking how many servers are waiting
-# for a request. If there are fewer than MinSpareServers, it creates
-# a new spare. If there are more than MaxSpareServers, some of the
-# spares die off. The default values are probably OK for most sites.
-#
-MinSpareServers 5
-MaxSpareServers 10
-
-#
-# Number of servers to start initially --- should be a reasonable ballpark
-# figure.
-#
-StartServers 5
-
-#
-# Limit on total number of servers running, i.e., limit on the number
-# of clients who can simultaneously connect --- if this limit is ever
-# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
-# It is intended mainly as a brake to keep a runaway server from taking
-# the system with it as it spirals down...
-#
-MaxClients 150
-
-#
-# MaxRequestsPerChild: the number of requests each child process is
-# allowed to process before the child dies. The child will exit so
-# as to avoid problems after prolonged use when Apache (and maybe the
-# libraries it uses) leak memory or other resources. On most systems, this
-# isn't really needed, but a few (such as Solaris) do have notable leaks
-# in the libraries. For these platforms, set to something like 10000
-# or so; a setting of 0 means unlimited.
-#
-# NOTE: This value does not include keepalive requests after the initial
-# request per connection. For example, if a child process handles
-# an initial request and 10 subsequent "keptalive" requests, it
-# would only count as 1 request towards this limit.
-#
-MaxRequestsPerChild 0
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, instead of the default. See also the <VirtualHost>
-# directive.
-#
-#Listen 3000
-#Listen 12.34.56.78:80
-
-#
-# BindAddress: You can support virtual hosts with this option. This directive
-# is used to tell the server which IP address to listen to. It can either
-# contain "*", an IP address, or a fully qualified Internet domain name.
-# See also the <VirtualHost> and Listen directives.
-#
-#BindAddress *
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Please read the file http://httpd.apache.org/docs/dso.html for more
-# details about the DSO mechanism and run `httpd -l' for the list of already
-# built-in (statically linked and thus always available) modules in your httpd
-# binary.
-#
-# Note: The order in which modules are loaded is important. Don't change
-# the order below without expert advice.
-#
-# Example:
-# LoadModule foo_module libexec/mod_foo.so
-LoadModule vhost_alias_module libexec/apache/mod_vhost_alias.so
-#LoadModule env_module libexec/apache/mod_env.so
-LoadModule define_module libexec/apache/mod_define.so
-LoadModule config_log_module libexec/apache/mod_log_config.so
-LoadModule mime_magic_module libexec/apache/mod_mime_magic.so
-LoadModule mime_module libexec/apache/mod_mime.so
-LoadModule negotiation_module libexec/apache/mod_negotiation.so
-#LoadModule status_module libexec/apache/mod_status.so
-#LoadModule info_module libexec/apache/mod_info.so
-LoadModule includes_module libexec/apache/mod_include.so
-LoadModule autoindex_module libexec/apache/mod_autoindex.so
-LoadModule dir_module libexec/apache/mod_dir.so
-LoadModule cgi_module libexec/apache/mod_cgi.so
-#LoadModule asis_module libexec/apache/mod_asis.so
-#LoadModule imap_module libexec/apache/mod_imap.so
-#LoadModule action_module libexec/apache/mod_actions.so
-#LoadModule speling_module libexec/apache/mod_speling.so
-#LoadModule userdir_module libexec/apache/mod_userdir.so
-LoadModule alias_module libexec/apache/mod_alias.so
-LoadModule rewrite_module libexec/apache/mod_rewrite.so
-LoadModule access_module libexec/apache/mod_access.so
-LoadModule auth_module libexec/apache/mod_auth.so
-LoadModule anon_auth_module libexec/apache/mod_auth_anon.so
-#LoadModule dbm_auth_module libexec/apache/mod_auth_dbm.so
-#LoadModule digest_module libexec/apache/mod_digest.so
-LoadModule proxy_module libexec/apache/libproxy.so
-LoadModule cern_meta_module libexec/apache/mod_cern_meta.so
-LoadModule expires_module libexec/apache/mod_expires.so
-LoadModule headers_module libexec/apache/mod_headers.so
-#LoadModule usertrack_module libexec/apache/mod_usertrack.so
-#LoadModule log_forensic_module libexec/apache/mod_log_forensic.so
-#LoadModule unique_id_module libexec/apache/mod_unique_id.so
-LoadModule setenvif_module libexec/apache/mod_setenvif.so
-
-# Reconstruction of the complete module list from all available modules
-# (static and shared ones) to achieve correct module execution order.
-# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
-ClearModuleList
-AddModule mod_vhost_alias.c
-#AddModule mod_env.c
-AddModule mod_define.c
-AddModule mod_log_config.c
-AddModule mod_mime_magic.c
-AddModule mod_mime.c
-AddModule mod_negotiation.c
-#AddModule mod_status.c
-#AddModule mod_info.c
-AddModule mod_include.c
-AddModule mod_autoindex.c
-AddModule mod_dir.c
-AddModule mod_cgi.c
-#AddModule mod_asis.c
-#AddModule mod_imap.c
-#AddModule mod_actions.c
-#AddModule mod_speling.c
-#AddModule mod_userdir.c
-AddModule mod_alias.c
-AddModule mod_rewrite.c
-AddModule mod_access.c
-AddModule mod_auth.c
-AddModule mod_auth_anon.c
-#AddModule mod_auth_dbm.c
-#AddModule mod_digest.c
-AddModule mod_proxy.c
-AddModule mod_cern_meta.c
-AddModule mod_expires.c
-AddModule mod_headers.c
-#AddModule mod_usertrack.c
-#AddModule mod_log_forensic.c
-#AddModule mod_unique_id.c
-AddModule mod_so.c
-AddModule mod_setenvif.c
-
-#
-# ExtendedStatus controls whether Apache will generate "full" status
-# information (ExtendedStatus On) or just basic information (ExtendedStatus
-# Off) when the "server-status" handler is called. The default is Off.
-#
-#ExtendedStatus On
-
-### Section 2: 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition. These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-#
-# If your ServerType directive (set earlier in the 'Global Environment'
-# section) is set to "inetd", the next few directives don't have any
-# effect since their settings are defined by the inetd configuration.
-# Skip ahead to the ServerAdmin directive.
-#
-
-#
-# Port: The port to which the standalone server listens. For
-# ports < 1023, you will need httpd to be run as root initially.
-#
-Port 80
-
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-# . On SCO (ODT 3) use "User nouser" and "Group nogroup".
-# . On HPUX you may not be able to use shared memory as nobody, and the
-# suggested workaround is to create a user www and use that user.
-# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
-# when the value of (unsigned)Group is above 60000;
-# don't use Group "#-1" on these systems!
-#
-User nobody
-Group nobody
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed. This address appears on some server-generated pages, such
-# as error documents.
-#
-ServerAdmin root@midas.slackware.lan
-
-#
-# ServerName allows you to set a host name which is sent back to clients for
-# your server if it's different than the one the program would get (i.e., use
-# "www" instead of the host's real name).
-#
-# Note: You cannot just invent host names and hope they work. The name you
-# define here must be a valid DNS name for your host. If you don't understand
-# this, ask your network administrator.
-# If your host doesn't have a registered DNS name, enter its IP address here.
-# You will have to access it by its address (e.g., http://123.45.67.89/)
-# anyway, and this will make redirections work in a sensible way.
-#
-# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
-# machine always knows itself by this address. If you use Apache strictly for
-# local testing and development, you may use 127.0.0.1 as the server name.
-#
-#ServerName www.example.com
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/var/www/htdocs"
-
-#
-# Each directory to which Apache has access, can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories).
-#
-# First, we configure the "default" to be a very restrictive set of
-# permissions.
-#
-<Directory />
- Options FollowSymLinks
- AllowOverride None
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory "/var/www/htdocs">
-
-#
-# This may also be "None", "All", or any combination of "Indexes",
-# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
-#
-# Note that "MultiViews" must be named *explicitly* --- "Options All"
-# doesn't give it to you.
-#
- Options Indexes FollowSymLinks MultiViews
-
-#
-# This controls which options the .htaccess files in directories can
-# override. Can also be "All", or any combination of "Options", "FileInfo",
-# "AuthConfig", and "Limit"
-#
- AllowOverride None
-
-#
-# Controls who can get stuff from this server.
-#
- Order allow,deny
- Allow from all
-</Directory>
-
-#
-# UserDir: The name of the directory which is appended onto a user's home
-# directory if a ~user request is received.
-#
-<IfModule mod_userdir.c>
- UserDir public_html
-</IfModule>
-
-#
-# Control access to UserDir directories. The following is an example
-# for a site where these directories are restricted to read-only.
-#
-#<Directory /home/*/public_html>
-# AllowOverride FileInfo AuthConfig Limit
-# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
-# <Limit GET POST OPTIONS PROPFIND>
-# Order allow,deny
-# Allow from all
-# </Limit>
-# <LimitExcept GET POST OPTIONS PROPFIND>
-# Order deny,allow
-# Deny from all
-# </LimitExcept>
-#</Directory>
-
-#
-# DirectoryIndex: Name of the file or files to use as a pre-written HTML
-# directory index. Separate multiple entries with spaces.
-#
-<IfModule mod_dir.c>
- DirectoryIndex index.html
-</IfModule>
-
-#
-# AccessFileName: The name of the file to look for in each directory
-# for access control information.
-#
-AccessFileName .htaccess
-
-#
-# The following lines prevent .htaccess files from being viewed by
-# Web clients. Since .htaccess files often contain authorization
-# information, access is disallowed for security reasons. Comment
-# these lines out if you want Web visitors to see the contents of
-# .htaccess files. If you change the AccessFileName directive above,
-# be sure to make the corresponding changes here.
-#
-# Also, folks tend to use names such as .htpasswd for password
-# files, so this will protect those as well.
-#
-<Files ~ "^\.ht">
- Order allow,deny
- Deny from all
- Satisfy All
-</Files>
-
-#
-# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
-# document that was negotiated on the basis of content. This asks proxy
-# servers not to cache the document. Uncommenting the following line disables
-# this behavior, and proxies will be allowed to cache the documents.
-#
-#CacheNegotiatedDocs
-
-#
-# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
-# Apache needs to construct a self-referencing URL (a URL that refers back
-# to the server the response is coming from) it will use ServerName and
-# Port to form a "canonical" name. With this setting off, Apache will
-# use the hostname:port that the client supplied, when possible. This
-# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
-#
-UseCanonicalName On
-
-#
-# TypesConfig describes where the mime.types file (or equivalent) is
-# to be found.
-#
-<IfModule mod_mime.c>
- TypesConfig /etc/apache/mime.types
-</IfModule>
-
-#
-# DefaultType is the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value. If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
-DefaultType text/plain
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type. The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-# mod_mime_magic is not part of the default server (you have to add
-# it yourself with a LoadModule [see the DSO paragraph in the 'Global
-# Environment' section], or recompile the server and include mod_mime_magic
-# as part of the configuration), so it's enclosed in an <IfModule> container.
-# This means that the MIMEMagicFile directive will only be processed if the
-# module is part of the server.
-#
-<IfModule mod_mime_magic.c>
- MIMEMagicFile /etc/apache/magic
-</IfModule>
-
-#
-# HostnameLookups: Log the names of clients or just their IP addresses
-# e.g., www.apache.org (on) or 204.62.129.132 (off).
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on, since enabling it means that
-# each client request will result in AT LEAST one lookup request to the
-# nameserver.
-#
-HostnameLookups Off
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here. If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog "| /usr/bin/error-log.sh /var/log/apache/error_log"
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-#
-# The following directives define some format nicknames for use with
-# a CustomLog directive (see below).
-#
-LogFormat "%l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
-LogFormat "%l %u %t \"%r\" %>s %b" common
-LogFormat "%{Referer}i -> %U" referer
-LogFormat "%{User-agent}i" agent
-
-#
-# The location and format of the access logfile (Common Logfile Format).
-# If you do not define any access logfiles within a <VirtualHost>
-# container, they will be logged here. Contrariwise, if you *do*
-# define per-<VirtualHost> access logfiles, transactions will be
-# logged therein and *not* in this file.
-#
-CustomLog /var/log/apache/access_log common
-
-#
-# If you would like to have agent and referer logfiles, uncomment the
-# following directives.
-#
-#CustomLog /var/log/apache/referer_log referer
-#CustomLog /var/log/apache/agent_log agent
-
-#
-# If you prefer a single logfile with access, agent, and referer information
-# (Combined Logfile Format) you can use the following directive.
-#
-#CustomLog /var/log/apache/access_log combined
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (error documents, FTP directory listings,
-# mod_status and mod_info output etc., but not CGI generated documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of: On | Off | EMail
-#
-ServerSignature Off
-
-# EBCDIC configuration:
-# (only for mainframes using the EBCDIC codeset, currently one of:
-# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
-# The following default configuration assumes that "text files"
-# are stored in EBCDIC (so that you can operate on them using the
-# normal POSIX tools like grep and sort) while "binary files" are
-# stored with identical octets as on an ASCII machine.
-#
-# The directives are evaluated in configuration file order, with
-# the EBCDICConvert directives applied before EBCDICConvertByType.
-#
-# If you want to have ASCII HTML documents and EBCDIC HTML documents
-# at the same time, you can use the file extension to force
-# conversion off for the ASCII documents:
-# > AddType text/html .ahtml
-# > EBCDICConvert Off=InOut .ahtml
-#
-# EBCDICConvertByType On=InOut text/* message/* multipart/*
-# EBCDICConvertByType On=In application/x-www-form-urlencoded
-# EBCDICConvertByType On=InOut application/postscript model/vrml
-# EBCDICConvertByType Off=InOut */*
-
-
-#
-# Aliases: Add here as many aliases as you need (with no limit). The format is
-# Alias fakename realname
-#
-<IfModule mod_alias.c>
-
- #
- # Note that if you include a trailing / on fakename then the server will
- # require it to be present in the URL. So "/icons" isn't aliased in this
- # example, only "/icons/". If the fakename is slash-terminated, then the
- # realname must also be slash terminated, and if the fakename omits the
- # trailing slash, the realname must also omit it.
- #
- Alias /icons/ "/var/www/icons/"
-
- <Directory "/var/www/icons">
- Options Indexes MultiViews
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
-
- # This Alias will project the on-line documentation tree under /manual/
- # even if you change the DocumentRoot. Comment it if you don't want to
- # provide access to the on-line documentation.
- #
- Alias /manual/ "/var/www/htdocs/manual/"
-
- <Directory "/var/www/htdocs/manual">
- Options Indexes FollowSymlinks MultiViews
- AllowOverride None
- Order allow,deny
- Allow from all
- </Directory>
-
- #
- # ScriptAlias: This controls which directories contain server scripts.
- # ScriptAliases are essentially the same as Aliases, except that
- # documents in the realname directory are treated as applications and
- # run by the server when requested rather than as documents sent to the client.
- # The same rules about trailing "/" apply to ScriptAlias directives as to
- # Alias.
- #
- ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
-
- #
- # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
- # CGI directory exists, if you have that configured.
- #
- <Directory "/var/www/cgi-bin">
- AllowOverride None
- Options None
- Order allow,deny
- Allow from all
- </Directory>
-
-</IfModule>
-# End of aliases.
-
-#
-# Redirect allows you to tell clients about documents which used to exist in
-# your server's namespace, but do not anymore. This allows you to tell the
-# clients where to look for the relocated document.
-# Format: Redirect old-URI new-URL
-#
-
-#
-# Directives controlling the display of server-generated directory listings.
-#
-<IfModule mod_autoindex.c>
-
- #
- # FancyIndexing is whether you want fancy directory indexing or standard
- #
- IndexOptions FancyIndexing
-
- #
- # AddIcon* directives tell the server which icon to show for different
- # files or filename extensions. These are only displayed for
- # FancyIndexed directories.
- #
- AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
-
- AddIconByType (TXT,/icons/text.gif) text/*
- AddIconByType (IMG,/icons/image2.gif) image/*
- AddIconByType (SND,/icons/sound2.gif) audio/*
- AddIconByType (VID,/icons/movie.gif) video/*
-
- AddIcon /icons/binary.gif .bin .exe
- AddIcon /icons/binhex.gif .hqx
- AddIcon /icons/tar.gif .tar
- AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
- AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
- AddIcon /icons/a.gif .ps .ai .eps
- AddIcon /icons/layout.gif .html .shtml .htm .pdf
- AddIcon /icons/text.gif .txt
- AddIcon /icons/c.gif .c
- AddIcon /icons/p.gif .pl .py
- AddIcon /icons/f.gif .for
- AddIcon /icons/dvi.gif .dvi
- AddIcon /icons/uuencoded.gif .uu
- AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
- AddIcon /icons/tex.gif .tex
- AddIcon /icons/bomb.gif core
-
- AddIcon /icons/back.gif ..
- AddIcon /icons/hand.right.gif README
- AddIcon /icons/folder.gif ^^DIRECTORY^^
- AddIcon /icons/blank.gif ^^BLANKICON^^
-
- #
- # DefaultIcon is which icon to show for files which do not have an icon
- # explicitly set.
- #
- DefaultIcon /icons/unknown.gif
-
- #
- # AddDescription allows you to place a short description after a file in
- # server-generated indexes. These are only displayed for FancyIndexed
- # directories.
- # Format: AddDescription "description" filename
- #
- #AddDescription "GZIP compressed document" .gz
- #AddDescription "tar archive" .tar
- #AddDescription "GZIP compressed tar archive" .tgz
-
- #
- # ReadmeName is the name of the README file the server will look for by
- # default, and append to directory listings.
- #
- # HeaderName is the name of a file which should be prepended to
- # directory indexes.
- #
- ReadmeName README.html
- HeaderName HEADER.html
-
- #
- # IndexIgnore is a set of filenames which directory indexing should ignore
- # and not include in the listing. Shell-style wildcarding is permitted.
- #
- IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
-
-</IfModule>
-# End of indexing directives.
-
-#
-# Document types.
-#
-<IfModule mod_mime.c>
-
- #
- # AddLanguage allows you to specify the language of a document. You can
- # then use content negotiation to give a browser a file in a language
- # it can understand.
- #
- # Note 1: The suffix does not have to be the same as the language
- # keyword --- those with documents in Polish (whose net-standard
- # language code is pl) may wish to use "AddLanguage pl .po" to
- # avoid the ambiguity with the common suffix for perl scripts.
- #
- # Note 2: The example entries below illustrate that in quite
- # some cases the two character 'Language' abbreviation is not
- # identical to the two character 'Country' code for its country,
- # E.g. 'Danmark/dk' versus 'Danish/da'.
- #
- # Note 3: In the case of 'ltz' we violate the RFC by using a three char
- # specifier. But there is 'work in progress' to fix this and get
- # the reference data for rfc1766 cleaned up.
- #
- # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
- # French (fr) - German (de) - Greek-Modern (el)
- # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
- # Portugese (pt) - Luxembourgeois* (ltz)
- # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
- # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
- # Russian (ru)
- #
- AddLanguage da .dk
- AddLanguage nl .nl
- AddLanguage en .en
- AddLanguage et .ee
- AddLanguage fr .fr
- AddLanguage de .de
- AddLanguage el .el
- AddLanguage he .he
- AddCharset ISO-8859-8 .iso8859-8
- AddLanguage it .it
- AddLanguage ja .ja
- AddCharset ISO-2022-JP .jis
- AddLanguage kr .kr
- AddCharset ISO-2022-KR .iso-kr
- AddLanguage nn .nn
- AddLanguage no .no
- AddLanguage pl .po
- AddCharset ISO-8859-2 .iso-pl
- AddLanguage pt .pt
- AddLanguage pt-br .pt-br
- AddLanguage ltz .lu
- AddLanguage ca .ca
- AddLanguage es .es
- AddLanguage sv .sv
- AddLanguage cs .cz .cs
- AddLanguage ru .ru
- AddLanguage zh-TW .zh-tw
- AddCharset Big5 .Big5 .big5
- AddCharset WINDOWS-1251 .cp-1251
- AddCharset CP866 .cp866
- AddCharset ISO-8859-5 .iso-ru
- AddCharset KOI8-R .koi8-r
- AddCharset UCS-2 .ucs2
- AddCharset UCS-4 .ucs4
- AddCharset UTF-8 .utf8
-
- # LanguagePriority allows you to give precedence to some languages
- # in case of a tie during content negotiation.
- #
- # Just list the languages in decreasing order of preference. We have
- # more or less alphabetized them here. You probably want to change this.
- #
- <IfModule mod_negotiation.c>
- LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
- </IfModule>
-
- #
- # AddType allows you to tweak mime.types without actually editing it, or to
- # make certain files to be certain types.
- #
- AddType application/x-tar .tgz
-
- #
- # AddEncoding allows you to have certain browsers uncompress
- # information on the fly. Note: Not all browsers support this.
- # Despite the name similarity, the following Add* directives have nothing
- # to do with the FancyIndexing customization directives above.
- #
- AddEncoding x-compress .Z
- AddEncoding x-gzip .gz .tgz
- #
- # If the AddEncoding directives above are commented-out, then you
- # probably should define those extensions to indicate media types:
- #
- #AddType application/x-compress .Z
- #AddType application/x-gzip .gz .tgz
-
- #
- # AddHandler allows you to map certain file extensions to "handlers",
- # actions unrelated to filetype. These can be either built into the server
- # or added with the Action command (see below)
- #
- # If you want to use server side includes, or CGI outside
- # ScriptAliased directories, uncomment the following lines.
- #
- # To use CGI scripts:
- #
- #AddHandler cgi-script .cgi
-
- #
- # To use server-parsed HTML files
- #
- #AddType text/html .shtml
- #AddHandler server-parsed .shtml
-
- #
- # Uncomment the following line to enable Apache's send-asis HTTP file
- # feature
- #
- #AddHandler send-as-is asis
-
- #
- # If you wish to use server-parsed imagemap files, use
- #
- #AddHandler imap-file map
-
- #
- # To enable type maps, you might want to use
- #
- #AddHandler type-map var
-
-</IfModule>
-# End of document types.
-
-#
-# Action lets you define media types that will execute a script whenever
-# a matching file is called. This eliminates the need for repeated URL
-# pathnames for oft-used CGI file processors.
-# Format: Action media/type /cgi-script/location
-# Format: Action handler-name /cgi-script/location
-#
-
-#
-# MetaDir: specifies the name of the directory in which Apache can find
-# meta information files. These files contain additional HTTP headers
-# to include when sending the document
-#
-#MetaDir .web
-
-#
-# MetaSuffix: specifies the file name suffix for the file containing the
-# meta information.
-#
-#MetaSuffix .meta
-
-#
-# Customizable error response (Apache style)
-# these come in three flavors
-#
-# 1) plain text
-ErrorDocument 500 /missing.html
-# n.b. the single leading (") marks it as text, it does not get output
-#
-# 2) local redirects
-ErrorDocument 404 /missing.html
-# to redirect to local URL /missing.html
-#ErrorDocument 404 /cgi-bin/missing_handler.pl
-# N.B.: You can redirect to a script or a document using server-side-includes.
-#
-# 3) external redirects
-ErrorDocument 402 /missing.html
-# N.B.: Many of the environment variables associated with the original
-# request will *not* be available to such a script.
-
-#
-# Customize behaviour based on the browser
-#
-<IfModule mod_setenvif.c>
-
- #
- # The following directives modify normal HTTP response behavior.
- # The first directive disables keepalive for Netscape 2.x and browsers that
- # spoof it. There are known problems with these browser implementations.
- # The second directive is for Microsoft Internet Explorer 4.0b2
- # which has a broken HTTP/1.1 implementation and does not properly
- # support keepalive when it is used on 301 or 302 (redirect) responses.
- #
- BrowserMatch "Mozilla/2" nokeepalive
- BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
-
- #
- # The following directive disables HTTP/1.1 responses to browsers which
- # are in violation of the HTTP/1.0 spec by not being able to grok a
- # basic 1.1 response.
- #
- BrowserMatch "RealPlayer 4\.0" force-response-1.0
- BrowserMatch "Java/1\.0" force-response-1.0
- BrowserMatch "JDK/1\.0" force-response-1.0
-
-</IfModule>
-# End of browser customization directives
-
-#
-# Allow server status reports, with the URL of http://servername/server-status
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-status>
-# SetHandler server-status
-# Order deny,allow
-# Deny from all
-# Allow from .example.com
-#</Location>
-
-#
-# Allow remote server configuration reports, with the URL of
-# http://servername/server-info (requires that mod_info.c be loaded).
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-info>
-# SetHandler server-info
-# Order deny,allow
-# Deny from all
-# Allow from .example.com
-#</Location>
-
-#
-# There have been reports of people trying to abuse an old bug from pre-1.1
-# days. This bug involved a CGI script distributed as a part of Apache.
-# By uncommenting these lines you can redirect these attacks to a logging
-# script on phf.apache.org. Or, you can record them yourself, using the script
-# support/phf_abuse_log.cgi.
-#
-#<Location /cgi-bin/phf*>
-# Deny from all
-# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
-#</Location>
-
-### Section 3: Virtual Hosts
-#
-# VirtualHost: If you want to maintain multiple domains/hostnames on your
-# machine you can setup VirtualHost containers for them. Most configurations
-# use only name-based virtual hosts so the server doesn't need to worry about
-# IP addresses. This is indicated by the asterisks in the directives below.
-#
-# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
-# for further details before you try to setup virtual hosts.
-#
-# You may use the command line option '-S' to verify your virtual host
-# configuration.
-
-#
-# Use name-based virtual hosting.
-#
-#NameVirtualHost *:80
-
-#
-# VirtualHost example:
-# Almost any Apache directive may go into a VirtualHost container.
-# The first VirtualHost section is used for requests without a known
-# server name.
-#
-#<VirtualHost *:80>
-# ServerAdmin webmaster@dummy-host.example.com
-# DocumentRoot /www/docs/dummy-host.example.com
-# ServerName dummy-host.example.com
-# ErrorLog logs/dummy-host.example.com-error_log
-# CustomLog logs/dummy-host.example.com-access_log common
-#</VirtualHost>
-
-# By default, all external Apache modules are disabled. To enable a particular
-# module for Apache, make sure the necessary packages are installed. Then
-# uncomment the appropriate Include line below, save the file, and restart
-# Apache. Note that some modules may need additional configuration steps. For
-# example, mod_ssl requires a site certificate which you may need to generate.
-#
-# Lastly, if you remove a module package, be sure to edit this file and comment
-# out the appropriate Include line.
-
-# ==> mod_php configuration settings <==
-#
-# PACKAGES REQUIRED: openssl-solibs (A series) and/or openssl (N series),
-# mysql (AP series), gmp (L series), mhash (L series),
-# and apache (N series)
-#
-#Include /etc/apache/mod_php.conf
-
-# ==> mod_ssl configuration settings <==
-#
-# PACKAGES REQUIRED: apache (N series) and openssl (N series)
-#
-#Include /etc/apache/mod_ssl.conf
-
-#NameVirtualHost VSERVER_IP
-
-Include /etc/apache/vhosts
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/apache/php.ini b/branches/0.6/templates/vserver/vserver.d/etc/apache/php.ini
deleted file mode 100644
index e6cddef..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/apache/php.ini
+++ /dev/null
@@ -1,1122 +0,0 @@
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-;
-; This is the recommended, PHP 4-style version of the php.ini-dist file. It
-; sets some non standard settings, that make PHP more efficient, more secure,
-; and encourage cleaner coding.
-; The price is that with these settings, PHP may be incompatible with some
-; applications, and sometimes, more difficult to develop with. Using this
-; file is warmly recommended for production sites. As all of the changes from
-; the standard settings are thoroughly documented, you can go over each one,
-; and decide whether you want to use it or not.
-;
-; For general information about the php.ini file, please consult the php.ini-dist
-; file, included in your PHP distribution.
-;
-; This file is different from the php.ini-dist file in the fact that it features
-; different values for several directives, in order to improve performance, while
-; possibly breaking compatibility with the standard out-of-the-box behavior of
-; PHP 3. Please make sure you read what's different, and modify your scripts
-; accordingly, if you decide to use this file instead.
-;
-; - register_globals = Off [Security, Performance]
-; Global variables are no longer registered for input data (POST, GET, cookies,
-; environment and other server variables). Instead of using $foo, you must use
-; you can use $_REQUEST["foo"] (includes any variable that arrives through the
-; request, namely, POST, GET and cookie variables), or use one of the specific
-; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
-; on where the input originates. Also, you can look at the
-; import_request_variables() function.
-; Note that register_globals is going to be depracated (i.e., turned off by
-; default) in the next version of PHP, because it often leads to security bugs.
-; Read http://php.net/manual/en/security.registerglobals.php for further
-; information.
-; - display_errors = Off [Security]
-; With this directive set to off, errors that occur during the execution of
-; scripts will no longer be displayed as a part of the script output, and thus,
-; will no longer be exposed to remote users. With some errors, the error message
-; content may expose information about your script, web server, or database
-; server that may be exploitable for hacking. Production sites should have this
-; directive set to off.
-; - log_errors = On [Security]
-; This directive complements the above one. Any errors that occur during the
-; execution of your script will be logged (typically, to your server's error log,
-; but can be configured in several ways). Along with setting display_errors to off,
-; this setup gives you the ability to fully understand what may have gone wrong,
-; without exposing any sensitive information to remote users.
-; - output_buffering = 4096 [Performance]
-; Set a 4KB output buffer. Enabling output buffering typically results in less
-; writes, and sometimes less packets sent on the wire, which can often lead to
-; better performance. The gain this directive actually yields greatly depends
-; on which Web server you're working with, and what kind of scripts you're using.
-; - register_argc_argv = Off [Performance]
-; Disables registration of the somewhat redundant $argv and $argc global
-; variables.
-; - magic_quotes_gpc = Off [Performance]
-; Input data is no longer escaped with slashes so that it can be sent into
-; SQL databases without further manipulation. Instead, you should use the
-; function addslashes() on each input element you wish to send to a database.
-; - variables_order = "GPCS" [Performance]
-; The environment variables are not hashed into the $HTTP_ENV_VARS[]. To access
-; environment variables, you can use getenv() instead.
-; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
-; By default, PHP surpresses errors of type E_NOTICE. These error messages
-; are emitted for non-critical errors, but that could be a symptom of a bigger
-; problem. Most notably, this will cause error messages about the use
-; of uninitialized variables to be displayed.
-; - allow_call_time_pass_reference = Off [Code cleanliness]
-; It's not possible to decide to force a variable to be passed by reference
-; when calling a function. The PHP 4 style to do this is by making the
-; function require the relevant argument by reference.
-
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-engine = On
-
-; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
-; NOTE: Using short tags should be avoided when developing applications or
-; libraries that are meant for redistribution, or deployment on PHP
-; servers which are not under your control, because short tags may not
-; be supported on the target server. For portable, redistributable code,
-; be sure not to use short tags.
-short_open_tag = On
-
-; Allow ASP-style <% %> tags.
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-precision = 14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-y2k_compliance = On
-
-; Output buffering allows you to send header lines (including cookies) even
-; after you send body content, at the price of slowing PHP's output layer a
-; bit. You can enable output buffering during runtime by calling the output
-; buffering functions. You can also enable output buffering for all files by
-; setting this directive to On. If you wish to limit the size of the buffer
-; to a certain size - you can use a maximum number of bytes instead of 'On', as
-; a value for this directive (e.g., output_buffering=4096).
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function. For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-; directive. Instead, explicitly set the output handler using ob_start().
-; Using this ini directive may cause problems unless you know what script
-; is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP
-; outputs chunks that are few handreds bytes each as a result of compression.
-; If you want larger chunk size for better performence, enable output_buffering
-; also.
-; Note: output_handler must be empty if this is set 'On' !!!!
-; Instead you must use zlib.output_handler.
-zlib.output_compression = Off
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block. This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block. Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instanciated.
-; A warning appears if the specified function is not defined, or if the
-; function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a
-; callback-function.
-unserialize_callback_func=
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; Whether to enable the ability to force arguments to be passed by reference
-; at function call time. This method is deprecated and is likely to be
-; unsupported in future versions of PHP/Zend. The encouraged method of
-; specifying which arguments should be passed by reference is in the function
-; declaration. You're encouraged to try and turn this option Off and make
-; sure your scripts work properly with it in order to ensure they will work
-; with future versions of the language (you will receive a warning each time
-; you use this feature, and the argument will be passed by value instead of by
-; reference).
-allow_call_time_pass_reference = Off
-
-;
-; Safe Mode
-;
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-safe_mode_include_dir =
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes. In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here. By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-;
-; Note: If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv(). These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below. This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_classes =
-
-; Colors for Syntax Highlighting mode. Anything that's acceptable in
-; <font color="??????"> would work.
-;highlight.string = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html = #000000
-
-
-;
-; Misc
-;
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header). It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-expose_php = On
-
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-max_execution_time = 30 ; Maximum execution time of each script, in seconds
-max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
-memory_limit = 8M ; Maximum amount of memory a script may consume (8MB)
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; error_reporting is a bit-field. Or each number up to get desired error
-; reporting level
-; E_ALL - All errors and warnings
-; E_ERROR - fatal run-time errors
-; E_WARNING - run-time warnings (non-fatal errors)
-; E_PARSE - compile-time parse errors
-; E_NOTICE - run-time notices (these are warnings which often result
-; from a bug in your code, but it's possible that it was
-; intentional (e.g., using an uninitialized variable and
-; relying on the fact it's automatically initialized to an
-; empty string)
-; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
-; initial startup
-; E_COMPILE_ERROR - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR - user-generated error message
-; E_USER_WARNING - user-generated warning message
-; E_USER_NOTICE - user-generated notice message
-;
-; Examples:
-;
-; - Show all errors, except for notices
-;
-;error_reporting = E_ALL & ~E_NOTICE
-;
-; - Show only errors
-;
-;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
-;
-; - Show all errors
-;
-error_reporting = E_ALL
-
-; Print out errors (as a part of the output). For production web sites,
-; you're strongly encouraged to turn this feature off, and use error logging
-; instead (see below). Keeping display_errors enabled on a production web site
-; may reveal security information to end users, such as file paths on your Web
-; server, your database schema or other information.
-display_errors = Off
-
-; Even when display_errors is on, errors that occur during PHP's startup
-; sequence are not displayed. It's strongly recommended to keep
-; display_startup_errors off, except for when debugging.
-display_startup_errors = Off
-
-; Log errors into a log file (server-specific log, stderr, or error_log (below))
-; As stated above, you're strongly advised to use error logging in place of
-; error displaying on production web sites.
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line until ignore_repeated_source is set true.
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting
-; is On you will not log errors with repeated messages from different files or
-; sourcelines.
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if
-; error reporting includes E_WARNING in the allowed list
-report_memleaks = On
-
-; Store the last error/warning message in $php_errormsg (boolean).
-track_errors = Off
-
-; Disable the inclusion of HTML tags in error messages.
-;html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://www.php.net/docs.php
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including
-; the dot.
-;docref_root = "/phpmanual/"
-;docref_ext = .html
-
-; String to output before an error message.
-;error_prepend_string = "<font color=ff0000>"
-
-; String to output after an error message.
-;error_append_string = "</font>"
-
-; Log errors to specified file.
-;error_log = filename
-
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-;
-; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
-
-; The separator used in PHP generated URLs to separate arguments.
-; Default is "&".
-;arg_separator.output = "&amp;"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; Default is "&".
-; NOTE: Every character in this directive is considered as separator!
-;arg_separator.input = ";&"
-
-; This directive describes the order in which PHP registers GET, POST, Cookie,
-; Environment and Built-in variables (G, P, C, E & S respectively, often
-; referred to as EGPCS or GPC). Registration is done from left to right, newer
-; values override older values.
-variables_order = "GPCS"
-
-; Whether or not to register the EGPCS variables as global variables. You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data. This makes most sense when coupled with track_vars - in which
-; case you can access all of the GPC variables through the $HTTP_*_VARS[],
-; variables.
-;
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on; Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-register_globals = Off
-
-; This directive tells PHP whether to declare the argv&argc variables (that
-; would contain the GET information). If you don't use these variables, you
-; should turn it off for increased performance.
-register_argc_argv = Off
-
-; Maximum size of POST data that PHP will accept.
-post_max_size = 8M
-
-; This directive is deprecated. Use variables_order instead.
-gpc_order = "GPC"
-
-; Magic quotes
-;
-
-; Magic quotes for incoming GET/POST/Cookie data.
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-magic_quotes_runtime = Off
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-magic_quotes_sybase = Off
-
-; Automatically add files before or after any PHP document.
-auto_prepend_file =
-auto_append_file =
-
-; As of 4.0b4, PHP always outputs a character encoding by default in
-; the Content-type: header. To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-default_mimetype = "text/html"
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable.
-;always_populate_raw_post_data = On
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"
-;include_path = ".:/php/includes"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues. The alternate is to use the
-; cgi.force_redirect configuration below
-doc_root =
-
-; The directory under which PHP opens the script using /~usernamem used only
-; if nonempty.
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; extension_dir = "./"
-extension_dir = "/usr/lib/php/extensions/"
-
-; Whether or not to enable the dl() function. The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers. Left undefined, PHP turns this on by default. You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request.
-; cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution. Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
-; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
-; of zero causes PHP to behave as before. Default is zero. You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client. This allows IIS to define the
-; security context that the request runs under. mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS. Default is zero.
-; fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection
-; fastcgi.log = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-;cgi.rfc2616_headers = 0
-
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-upload_max_filesize = 10M
-
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-allow_url_fopen = On
-
-; Define the anonymous ftp password (your email address)
-;from="john@doe.com"
-
-; Define the user agent for php to send
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; auto_detect_line_endings = Off
-
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-;
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-; extension=modulename.extension
-;
-; For example, on Windows:
-;
-; extension=msql.dll
-;
-; ... or under UNIX:
-;
-; extension=msql.so
-;
-; Note that it should be the name of the module only; no directory information
-; needs to go here. Specify the location of the extension with the
-; extension_dir directive above.
-;
-; Load the MySQL module by default. Comment this out if you don't use MySQL.
-extension=mysql.so
-
-; Load the gettext extension by default. Comment this out if you don't have the
-; gettext shared library installed.
-extension=gettext.so
-
-;Windows Extensions
-;Note that MySQL and ODBC support is now built in, so no dll is needed for it.
-;
-;extension=php_mbstring.dll
-;extension=php_bz2.dll
-;extension=php_cpdf.dll
-;extension=php_crack.dll
-;extension=php_curl.dll
-;extension=php_db.dll
-;extension=php_dba.dll
-;extension=php_dbase.dll
-;extension=php_dbx.dll
-;extension=php_domxml.dll
-;extension=php_exif.dll
-;extension=php_fdf.dll
-;extension=php_filepro.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_hyperwave.dll
-;extension=php_iconv.dll
-;extension=php_ifx.dll
-;extension=php_iisfunc.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_java.dll
-;extension=php_ldap.dll
-;extension=php_mcrypt.dll
-;extension=php_mhash.dll
-;extension=php_mime_magic.dll
-;extension=php_ming.dll
-;extension=php_mssql.dll
-;extension=php_msql.dll
-;extension=php_oci8.dll
-;extension=php_openssl.dll
-;extension=php_oracle.dll
-;extension=php_pdf.dll
-;extension=php_pgsql.dll
-;extension=php_printer.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_sockets.dll
-;extension=php_sybase_ct.dll
-;extension=php_w32api.dll
-;extension=php_xmlrpc.dll
-;extension=php_xslt.dll
-;extension=php_yaz.dll
-;extension=php_zip.dll
-
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
-; runtime, you can define these variables by calling define_syslog_variables().
-define_syslog_variables = Off
-
-[mail function]
-; For Win32 only.
-SMTP = localhost
-smtp_port = 25
-
-; For Win32 only.
-;sendmail_from = me@example.com
-
-; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
-;sendmail_path =
-
-[Java]
-;java.class.path = .\php_java.jar
-;java.home = c:\jdk
-;java.library = c:\jdk\jre\bin\hotspot\jvm.dll
-;java.library.path = .\
-
-[SQL]
-sql.safe_mode = Off
-
-[ODBC]
-;odbc.default_db = Not yet implemented
-;odbc.default_user = Not yet implemented
-;odbc.default_pw = Not yet implemented
-
-; Allow or prevent persistent links.
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-odbc.check_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-odbc.max_links = -1
-
-; Handling of LONG fields. Returns number of bytes to variables. 0 means
-; passthru.
-odbc.defaultlrl = 4096
-
-; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of uodbc.defaultlrl and uodbc.defaultbinmode
-odbc.defaultbinmode = 1
-
-[MySQL]
-; Allow or prevent persistent links.
-mysql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-mysql.max_links = -1
-
-; Default port number for mysql_connect(). If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
-; at MYSQL_PORT.
-mysql.default_port =
-
-; Default socket name for local MySQL connects. If empty, uses the built-in
-; MySQL defaults.
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password! And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-mysql.trace_mode = Off
-
-[mSQL]
-; Allow or prevent persistent links.
-msql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-msql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-msql.max_links = -1
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect().
-; Auto reset feature requires a little overheads.
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links. -1 means no limit.
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Noitce message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-pgsql.log_notice = 0
-
-[Sybase]
-; Allow or prevent persistent links.
-sybase.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybase.max_links = -1
-
-;sybase.interface_file = "/usr/sybase/interfaces"
-
-; Minimum error severity to display.
-sybase.min_error_severity = 10
-
-; Minimum message severity to display.
-sybase.min_message_severity = 10
-
-; Compatability mode with old versions of PHP 3.0.
-; If on, this will cause PHP to automatically assign types to results according
-; to their Sybase type, instead of treating them all as strings. This
-; compatibility mode will probably not stay around forever, so try applying
-; whatever necessary changes to your code, and turn it off.
-sybase.compatability_mode = Off
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-sybct.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-sybct.min_client_severity = 10
-
-[dbx]
-; returned column names can be converted for compatibility reasons
-; possible values for dbx.colnames_case are
-; "unchanged" (default, if not set)
-; "lowercase"
-; "uppercase"
-; the recommended default is either upper- or lowercase, but
-; unchanged is currently set for backwards compatibility
-dbx.colnames_case = "lowercase"
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-bcmath.scale = 0
-
-[browscap]
-;browscap = extra/browscap.ini
-
-[Informix]
-; Default host for ifx_connect() (doesn't apply in safe mode).
-ifx.default_host =
-
-; Default user for ifx_connect() (doesn't apply in safe mode).
-ifx.default_user =
-
-; Default password for ifx_connect() (doesn't apply in safe mode).
-ifx.default_password =
-
-; Allow or prevent persistent links.
-ifx.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-ifx.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent). -1 means no limit.
-ifx.max_links = -1
-
-; If on, select statements return the contents of a text blob instead of its id.
-ifx.textasvarchar = 0
-
-; If on, select statements return the contents of a byte blob instead of its id.
-ifx.byteasvarchar = 0
-
-; Trailing blanks are stripped from fixed-length char columns. May help the
-; life of Informix SE users.
-ifx.charasvarchar = 0
-
-; If on, the contents of text and byte blobs are dumped to a file instead of
-; keeping them in memory.
-ifx.blobinfile = 0
-
-; NULL's are returned as empty strings, unless this is set to 1. In that case,
-; NULL's are returned as string 'NULL'.
-ifx.nullformat = 0
-
-[Session]
-; Handler used to store/retrieve data.
-session.save_handler = files
-
-; Argument passed to save_handler. In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this
-; variable in order to use PHP's session functions.
-;session.save_path = /tmp
-
-; Whether to use cookies.
-session.use_cookies = 1
-
-; This option enables administrators to make their users invulnerable to
-; attacks which involve passing session ids in URLs; defaults to 0.
-; session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-session.cookie_domain =
-
-; Handler used to serialize data. php is the standard serializer of PHP.
-session.serialize_handler = php
-
-; Define the probability that the 'garbage collection' process is started
-; on every session initialization.
-; The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts
-; on each request.
-
-session.gc_probability = 1
-session.gc_divisor = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-session.gc_maxlifetime = 1440
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, albeit register_globals
-; is disabled. PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled.
-
-session.bug_compat_42 = 0
-session.bug_compat_warn = 1
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-session.referer_check =
-
-; How many bytes to read from the file.
-session.entropy_length = 0
-
-; Specified here to create the session id.
-session.entropy_file =
-
-;session.entropy_length = 16
-
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects.
-; or leave this empty to avoid sending anti-caching headers.
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-; to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-; in publically accessible computer.
-; - User may access your site with the same session ID
-; always using URL stored in browser's history or bookmarks.
-session.use_trans_sid = 0
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs. If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent). -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatability mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647. Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch. 0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. Default = 25
-;mssql.max_procs = 25
-
-[Assertion]
-; Assert(expr); active by default.
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-;assert.warning = On
-
-; Don't bail out by default.
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-;assert.callback = 0
-
-; Eval the expression with current error_reporting(). Set to true if you want
-; error_reporting(0) around the eval().
-;assert.quiet_eval = 0
-
-[Ingres II]
-; Allow or prevent persistent links.
-ingres.allow_persistent = On
-
-; Maximum number of persistent links. -1 means no limit.
-ingres.max_persistent = -1
-
-; Maximum number of links, including persistents. -1 means no limit.
-ingres.max_links = -1
-
-; Default database (format: [node_id::]dbname[/srv_class]).
-ingres.default_database =
-
-; Default user.
-ingres.default_user =
-
-; Default password.
-ingres.default_password =
-
-[Verisign Payflow Pro]
-; Default Payflow Pro server.
-pfpro.defaulthost = "test-payflow.verisign.com"
-
-; Default port to connect to.
-pfpro.defaultport = 443
-
-; Default timeout in seconds.
-pfpro.defaulttimeout = 30
-
-; Default proxy IP address (if required).
-;pfpro.proxyaddress =
-
-; Default proxy port.
-;pfpro.proxyport =
-
-; Default proxy logon.
-;pfpro.proxylogon =
-
-; Default proxy password.
-;pfpro.proxypassword =
-
-[com]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-;com.typelib_file =
-; allow Distributed-COM calls
-;com.allow_dcom = true
-; autoregister constants of a components typlib on com_load()
-;com.autoregister_typelib = true
-; register constants casesensitive
-;com.autoregister_casesensitive = false
-; show warnings on duplicate constat registrations
-;com.autoregister_verbose = true
-
-[Printer]
-;printer.default_printer = ""
-
-[mbstring]
-; language for internal character representation.
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation accoding to
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-; portable libs/applications.
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-;mbstring.func_overload = 0
-
-[FrontBase]
-;fbsql.allow_persistent = On
-;fbsql.autocommit = On
-;fbsql.default_database =
-;fbsql.default_database_password =
-;fbsql.default_host =
-;fbsql.default_password =
-;fbsql.default_user = "_SYSTEM"
-;fbsql.generate_warnings = Off
-;fbsql.max_connections = 128
-;fbsql.max_links = 128
-;fbsql.max_persistent = -1
-;fbsql.max_results = 128
-;fbsql.batchSize = 1000
-
-[Crack]
-; Modify the setting below to match the directory location of the cracklib
-; dictionary files. Include the base filename, but not the file extension.
-; crack.default_dictionary = "c:\php\lib\cracklib_dict"
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding
-; is used. For the decode settings you can distinguish between motorola and
-; intel byte order. A decode setting cannot be empty.
-;exif.encode_unicode = ISO-8859-15
-;exif.decode_unicode_motorola = UCS-2BE
-;exif.decode_unicode_intel = UCS-2LE
-;exif.encode_jis =
-;exif.decode_jis_motorola = JIS
-;exif.decode_jis_intel = JIS
-
-; Local Variables:
-; tab-width: 4
-; End:
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/apache/vhosts b/branches/0.6/templates/vserver/vserver.d/etc/apache/vhosts
deleted file mode 100644
index e69de29..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/apache/vhosts
+++ /dev/null
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/hosts b/branches/0.6/templates/vserver/vserver.d/etc/hosts
deleted file mode 100644
index 6e33147..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/hosts
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# hosts This file describes a number of hostname-to-address
-# mappings for the TCP/IP subsystem. It is mostly
-# used at boot time, when no name servers are running.
-# On small systems, this file can be used instead of a
-# "named" name server. Just add the names, addresses
-# and any aliases to this file...
-#
-# By the way, Arnt Gulbrandsen <agulbra@nvg.unit.no> says that 127.0.0.1
-# should NEVER be named with the name of the machine. It causes problems
-# for some (stupid) programs, irc and reputedly talk. :^)
-#
-
-# For loopbacking.
-127.0.0.1 localhost
-# This next entry is technically wrong, but good enough to get TCP/IP apps
-# to quit complaining that they can't verify the hostname on a loopback-only
-# Linux box.
-127.0.0.1 darkstar.example.net darkstar
-
-# End of hosts.
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/logrotate.d/apache b/branches/0.6/templates/vserver/vserver.d/etc/logrotate.d/apache
deleted file mode 100644
index f31fbe2..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/logrotate.d/apache
+++ /dev/null
@@ -1,11 +0,0 @@
-/var/log/apache/access_log /var/log/apache/error_log {
- monthly
- nomail
- compress
- create 0664 root root
- rotate 12
- postrotate
- /etc/rc.d/rc.httpd restart > /dev/null
- endscript
-}
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/profile b/branches/0.6/templates/vserver/vserver.d/etc/profile
deleted file mode 100644
index 563594a..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/profile
+++ /dev/null
@@ -1,87 +0,0 @@
-# /etc/profile: This file contains system-wide defaults used by
-# all Bourne (and related) shells.
-
-# Set the values for some environment variables:
-export MINICOM="-c on"
-export MANPATH=/usr/local/man:/usr/man:/usr/X11R6/man
-export HOSTNAME="`cat /etc/HOSTNAME`"
-export LESSOPEN="|lesspipe.sh %s"
-export LESS="-M"
-
-# If the user doesn't have a .inputrc, use the one in /etc.
-if [ ! -r "$HOME/.inputrc" ]; then
- export INPUTRC=/etc/inputrc
-fi
-
-# Set the default system $PATH:
-PATH="/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/usr/games"
-
-# For root users, ensure that /usr/local/sbin, /usr/sbin, and /sbin are in
-# the $PATH. Some means of connection don't add these by default (sshd comes
-# to mind).
-if [ "`id -u`" = "0" ]; then
- echo $PATH | grep /usr/local/sbin 1> /dev/null 2> /dev/null
- if [ ! $? = 0 ]; then
- PATH=/usr/local/sbin:/usr/sbin:/sbin:$PATH
- fi
-fi
-
-# I had problems using 'eval tset' instead of 'TERM=', but you might want to
-# try it anyway. I think with the right /etc/termcap it would work great.
-# eval `tset -sQ "$TERM"`
-if [ "$TERM" = "" -o "$TERM" = "unknown" ]; then
- TERM=linux
-fi
-
-# Set ksh93 visual editing mode:
-if [ "$SHELL" = "/bin/ksh" ]; then
- VISUAL=emacs
-# VISUAL=gmacs
-# VISUAL=vi
-fi
-
-# Set a default shell prompt:
-#PS1='`hostname`:`pwd`# '
-if [ "$SHELL" = "/bin/pdksh" ]; then
- PS1='! $ '
-elif [ "$SHELL" = "/bin/ksh" ]; then
- PS1='! ${PWD/#$HOME/~}$ '
-elif [ "$SHELL" = "/bin/zsh" ]; then
- PS1='%n@%m:%~%# '
-elif [ "$SHELL" = "/bin/ash" ]; then
- PS1='$ '
-else
- PS1='\u@\h:\w\$ '
-fi
-PS2='> '
-export PATH DISPLAY LESS TERM PS1 PS2
-
-# Default umask. A umask of 022 prevents new files from being created group
-# and world writable.
-umask 022
-
-# Set up the LS_COLORS and LS_OPTIONS environment variables for color ls:
-if [ "$SHELL" = "/bin/zsh" ]; then
- eval `dircolors -z`
-elif [ "$SHELL" = "/bin/ash" ]; then
- eval `dircolors -s`
-else
- eval `dircolors -b`
-fi
-
-# Append any additional sh scripts found in /etc/profile.d/:
-for profile_script in /etc/profile.d/*.sh ; do
- if [ -x $profile_script ]; then
- . $profile_script
- fi
-done
-unset profile_script
-
-# For non-root users, add the current directory to the search path:
-if [ ! "`id -u`" = "0" ]; then
- PATH="$PATH:."
-fi
-
-# firewall:
-export FTP_PASSIVE=1
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc
deleted file mode 100755
index eefbcc5..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/bash
-
-if [ "$1" == "3" ]; then
- /etc/rc.d/rc.M
-elif [ "$1" == "6" ]; then
- /etc/rc.d/rc.6
-else
- echo "Invalid level."
- exit 1
-fi
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.0 b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.0
deleted file mode 100755
index bfec90a..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.0
+++ /dev/null
@@ -1,110 +0,0 @@
-#! /bin/sh
-#
-# rc.6 This file is executed by init when it goes into runlevel
-# 0 (halt) or runlevel 6 (reboot). It kills all processes,
-# unmounts file systems and then either halts or reboots.
-#
-# Version: @(#)/etc/rc.d/rc.6 2.47 Sat Jan 13 13:37:26 PST 2001
-#
-# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
-# Modified by: Patrick J. Volkerding, <volkerdi@slackware.com>
-#
-
-# Set the path.
-PATH=/sbin:/etc:/bin:/usr/bin
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
- . /etc/rc.d/rc.sysvinit
-fi
-
-# Set linefeed mode to avoid staircase effect.
-stty onlcr
-
-echo "Running shutdown script $0:"
-
-# Find out how we were called.
-case "$0" in
- *0)
- command="halt"
- ;;
- *6)
- command=reboot
- ;;
- *)
- echo "$0: call me as \"rc.0\" or \"rc.6\" please!"
- exit 1
- ;;
-esac
-
-# Stop the Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
- /etc/rc.d/rc.httpd stop
-fi
-
-# Stop the MySQL database:
-if [ -r /var/run/mysql/mysql.pid ]; then
- . /etc/rc.d/rc.mysqld stop
-fi
-
-# Stop the Samba server:
-if [ -x /etc/rc.d/rc.samba ]; then
- . /etc/rc.d/rc.samba stop
-fi
-
-# Try to kill dhcpcd so the DHCP leases can be returned:
-killall -15 dhcpcd 1> /dev/null 2> /dev/null
-
-# Try to shut down pppd:
-PS="$(ps ax)"
-if echo "$PS" | grep -q -w pppd ; then
- if [ -x /usr/sbin/ppp-off ]; then
- /usr/sbin/ppp-off
- fi
-fi
-
-# Turn off process accounting:
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
- echo "Turning off process accounting."
- /sbin/accton
-fi
-
-# Kill all processes.
-# INIT is supposed to handle this entirely now, but this didn't always
-# work correctly without this second pass at killing off the processes.
-# Since INIT already notified the user that processes were being killed,
-# we'll avoid echoing this info this time around.
-if [ "$1" != "fast" ]; then # shutdown did not already kill all processes
- killall5 -15
- sleep 5
- killall5 -9
-fi
-
-# Carry a random seed between reboots.
-echo "Saving random seed from /dev/urandom in /etc/random-seed."
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
- dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
- dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-chmod 600 /etc/random-seed
-
-# Before unmounting file systems write a reboot or halt record to wtmp.
-$command -w
-
-# Clear /var/lock/subsys.
-if [ -d /var/lock/subsys ]; then
- rm -f /var/lock/subsys/*
-fi
-
-# This never hurts:
-sync
-
-# sleep 1 fixes problems with some hard drives that don't
-# otherwise finish syncing before reboot or poweroff
-sleep 1
-
-# This is to ensure all processes have completed on SMP machines:
-wait
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.4 b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.4
deleted file mode 100644
index b972052..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.4
+++ /dev/null
@@ -1,256 +0,0 @@
-#!/bin/sh
-#
-# rc.M This file is executed by init(8) when the system is being
-# initialized for one of the "multi user" run levels (i.e.
-# levels 1 through 6). It usually does mounting of file
-# systems et al.
-#
-# Version: @(#)/etc/rc.d/rc.M 2.23 Wed Feb 26 19:20:58 PST 2003
-#
-# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-# Heavily modified by Patrick Volkerding <volkerdi@slackware.com>
-#
-
-# Tell the viewers what's going to happen.
-echo "Going multiuser..."
-
-# Screen blanks after 15 minutes idle time, and powers down in one hour
-# if the kernel supports APM or ACPI power management:
-#/bin/setterm -blank 15 -powersave powerdown -powerdown 60
-
-# Set the hostname.
-#if [ -r /etc/HOSTNAME ]; then
-# /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .)
-#else
- # fall back on this old default:
-# echo "darkstar.example.net" > /etc/HOSTNAME
-# /bin/hostname darkstar
-#fi
-
-# Save the contents of 'dmesg':
-#/bin/dmesg -s 65536 > /var/log/dmesg
-
-# Start the system logger.
-if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then
- . /etc/rc.d/rc.syslog start
-fi
-
-# Initialize PCMCIA devices:
-#
-# NOTE: This used to be started near the top of rc.S so that PCMCIA devices
-# could be fsck'ed along with the other drives. This had some unfortunate
-# side effects, however, since root isn't yet read-write, and /var might not
-# even be mounted the .pid files can't be correctly written in /var/run and
-# the pcmcia system can't be correctly shut down. If you want some PCMCIA
-# partition to be mounted at boot (or when the card is inserted) then add
-# the appropriate lines to /etc/pcmcia/scsi.opts.
-#
-if [ -x /etc/rc.d/rc.pcmcia ] ; then
- . /etc/rc.d/rc.pcmcia start
- # The cards might need a little extra time here to initialize.
- if [ -r /var/run/cardmgr.pid ]; then
- sleep 5
- fi
-fi
-
-# Initialize the networking hardware. If your network driver is a module
-# and you haven't loaded it manually, this will be deferred until after
-# the hotplug system loads the module below.
-#if [ -x /etc/rc.d/rc.inet1 ]; then
-# . /etc/rc.d/rc.inet1
-#fi
-
-# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices:
-if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then
- # Don't run hotplug if 'nohotplug' was given at boot.
- if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
- echo "Activating hardware detection: /etc/rc.d/rc.hotplug start"
- . /etc/rc.d/rc.hotplug start
- fi
-fi
-
-# Start networking daemons:
-if [ -x /etc/rc.d/rc.inet2 ]; then
- . /etc/rc.d/rc.inet2
-fi
-
-# Remove stale locks and junk files (must be done after mount -a!)
-/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null
-
-# Remove stale hunt sockets so the game can start.
-if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then
- echo "Removing your stale hunt sockets from /tmp."
- /bin/rm -f /tmp/hunt*
-fi
-
-# Ensure basic filesystem permissions sanity.
-chmod 755 / 2> /dev/null
-chmod 1777 /tmp /var/tmp
-
-# Update all the shared library links:
-if [ -x /sbin/ldconfig ]; then
- echo "Updating shared library links: /sbin/ldconfig"
- /sbin/ldconfig
-fi
-
-# Update the X font indexes:
-if [ -x /usr/X11R6/bin/fc-cache ]; then
- echo "Updating X font indexes: /usr/X11R6/bin/fc-cache"
- /usr/X11R6/bin/fc-cache
-fi
-
-# Start the print spooling system. This will usually be LPRng (lpd) or CUPS.
-if [ -x /etc/rc.d/rc.cups ]; then
- # Start CUPS:
- /etc/rc.d/rc.cups start
-elif [ -x /etc/rc.d/rc.lprng ]; then
- # Start LPRng (lpd):
- . /etc/rc.d/rc.lprng start
-fi
-
-# Start netatalk. (a file/print server for Macs using Appletalk)
-if [ -x /etc/rc.d/rc.atalk ]; then
- /etc/rc.d/rc.atalk
-fi
-
-# Start smartd, which monitors the status of S.M.A.R.T. compatible
-# hard drives and reports any problems. Note some devices (which aren't
-# smart, I guess ;) will hang if probed by smartd, so it's commented out
-# by default.
-#if [ -x /usr/sbin/smartd ]; then
-# /usr/sbin/smartd
-#fi
-
-# Monitor the UPS with genpowerd.
-# To use this, uncomment this section and edit your settings in
-# /etc/genpowerd.conf (serial device, UPS type, etc). For more information,
-# see "man genpowerd" or the extensive documentation in the
-# /usr/doc/genpower-1.0.3 directory.
-# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want
-# support for stopping the UPS's inverter after the machine halts.
-#if [ -x /sbin/genpowerd ]; then
-# echo "Starting genpowerd daemon..."
-# /sbin/genpowerd
-#fi
-
-# Turn on process accounting. To enable process accounting, make sure the
-# option for BSD process accounting is enabled in your kernel, and then
-# create the file /var/log/pacct (touch /var/log/pacct). By default, process
-# accounting is not enabled (since /var/log/pacct does not exist). This is
-# because the log file can get VERY large.
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
- /sbin/accton /var/log/pacct
- chmod 640 /var/log/pacct
- echo "Process accounting turned on."
-fi
-
-# Start crond (Dillon's crond):
-# If you want cron to actually log activity to /var/log/cron, then change
-# -l10 to -l8 to increase the logging level.
-if [ -x /usr/sbin/crond ]; then
- /usr/sbin/crond -l10 >>/var/log/cron 2>&1
-fi
-
-# Start atd (manages jobs scheduled with 'at'):
-if [ -x /usr/sbin/atd ]; then
- /usr/sbin/atd -b 15 -l 1
-fi
-
-# Slackware-Mini-Quota-HOWTO:
-# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to
-# the appropriate partitions as listed in /etc/fstab. Here's an example:
-#
-# /dev/hda2 /home ext3 defaults,usrquota 1 1
-#
-# You'll then need to setup initial quota files at the top of the partitions
-# to support quota, like this:
-# touch /home/aquota.user /home/aquota.group
-# chmod 600 /home/aquota.user /home/aquota.group
-#
-# Then, reboot to activate the system.
-# To edit user quotas, use 'edquota'. See 'man edquota'. Also, the
-# official Quota Mini-HOWTO has lots of useful information. That can be found
-# here: /usr/doc/Linux-HOWTOs/Quota
-
-# Check quotas and then turn quota system on:
-if grep -q quota /etc/fstab ; then
- if [ -x /sbin/quotacheck ]; then
- echo "Checking filesystem quotas: /sbin/quotacheck -avugm"
- /sbin/quotacheck -avugm
- fi
- if [ -x /sbin/quotaon ]; then
- echo "Activating filesystem quotas: /sbin/quotaon -avug"
- /sbin/quotaon -avug
- fi
-fi
-
-# Start the sendmail daemon:
-if [ -x /etc/rc.d/rc.sendmail ]; then
- . /etc/rc.d/rc.sendmail start
-fi
-
-# Start the APM daemon if APM is enabled in the kernel:
-if [ -x /usr/sbin/apmd ]; then
- if cat /proc/apm 1> /dev/null 2> /dev/null ; then
- echo "Starting APM daemon: /usr/sbin/apmd"
- /usr/sbin/apmd
- fi
-fi
-
-# Start the ACPI (Advanced Configuration and Power Interface) daemon:
-if [ -x /etc/rc.d/rc.acpid ]; then
- . /etc/rc.d/rc.acpid start
-fi
-
-# Load ALSA (sound) defaults:
-if [ -x /etc/rc.d/rc.alsa ]; then
- . /etc/rc.d/rc.alsa
-fi
-
-# Load a custom screen font if the user has an rc.font script.
-if [ -x /etc/rc.d/rc.font ]; then
- . /etc/rc.d/rc.font
-fi
-
-# Load a custom keymap if the user has an rc.keymap script.
-if [ -x /etc/rc.d/rc.keymap ]; then
- . /etc/rc.d/rc.keymap
-fi
-
-# Initialize HP Officejet support:
-if [ -x /etc/rc.d/rc.hpoj ]; then
- . /etc/rc.d/rc.hpoj start
-fi
-
-# Start the MySQL database:
-if [ -x /etc/rc.d/rc.mysqld ]; then
- . /etc/rc.d/rc.mysqld start
-fi
-
-# Start Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
- . /etc/rc.d/rc.httpd start
-fi
-
-# Start Samba (a file/print server for Win95/NT machines).
-# Samba can be started in /etc/inetd.conf instead.
-if [ -x /etc/rc.d/rc.samba ]; then
- . /etc/rc.d/rc.samba start
-fi
-
-# Start the GPM mouse server:
-if [ -x /etc/rc.d/rc.gpm ]; then
- . /etc/rc.d/rc.gpm start
-fi
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
- . /etc/rc.d/rc.sysvinit
-fi
-
-# Start the local setup procedure.
-if [ -x /etc/rc.d/rc.local ]; then
- . /etc/rc.d/rc.local
-fi
-
-# All done.
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.6 b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.6
deleted file mode 100755
index bfec90a..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.6
+++ /dev/null
@@ -1,110 +0,0 @@
-#! /bin/sh
-#
-# rc.6 This file is executed by init when it goes into runlevel
-# 0 (halt) or runlevel 6 (reboot). It kills all processes,
-# unmounts file systems and then either halts or reboots.
-#
-# Version: @(#)/etc/rc.d/rc.6 2.47 Sat Jan 13 13:37:26 PST 2001
-#
-# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
-# Modified by: Patrick J. Volkerding, <volkerdi@slackware.com>
-#
-
-# Set the path.
-PATH=/sbin:/etc:/bin:/usr/bin
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
- . /etc/rc.d/rc.sysvinit
-fi
-
-# Set linefeed mode to avoid staircase effect.
-stty onlcr
-
-echo "Running shutdown script $0:"
-
-# Find out how we were called.
-case "$0" in
- *0)
- command="halt"
- ;;
- *6)
- command=reboot
- ;;
- *)
- echo "$0: call me as \"rc.0\" or \"rc.6\" please!"
- exit 1
- ;;
-esac
-
-# Stop the Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
- /etc/rc.d/rc.httpd stop
-fi
-
-# Stop the MySQL database:
-if [ -r /var/run/mysql/mysql.pid ]; then
- . /etc/rc.d/rc.mysqld stop
-fi
-
-# Stop the Samba server:
-if [ -x /etc/rc.d/rc.samba ]; then
- . /etc/rc.d/rc.samba stop
-fi
-
-# Try to kill dhcpcd so the DHCP leases can be returned:
-killall -15 dhcpcd 1> /dev/null 2> /dev/null
-
-# Try to shut down pppd:
-PS="$(ps ax)"
-if echo "$PS" | grep -q -w pppd ; then
- if [ -x /usr/sbin/ppp-off ]; then
- /usr/sbin/ppp-off
- fi
-fi
-
-# Turn off process accounting:
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
- echo "Turning off process accounting."
- /sbin/accton
-fi
-
-# Kill all processes.
-# INIT is supposed to handle this entirely now, but this didn't always
-# work correctly without this second pass at killing off the processes.
-# Since INIT already notified the user that processes were being killed,
-# we'll avoid echoing this info this time around.
-if [ "$1" != "fast" ]; then # shutdown did not already kill all processes
- killall5 -15
- sleep 5
- killall5 -9
-fi
-
-# Carry a random seed between reboots.
-echo "Saving random seed from /dev/urandom in /etc/random-seed."
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
- dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
- dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-chmod 600 /etc/random-seed
-
-# Before unmounting file systems write a reboot or halt record to wtmp.
-$command -w
-
-# Clear /var/lock/subsys.
-if [ -d /var/lock/subsys ]; then
- rm -f /var/lock/subsys/*
-fi
-
-# This never hurts:
-sync
-
-# sleep 1 fixes problems with some hard drives that don't
-# otherwise finish syncing before reboot or poweroff
-sleep 1
-
-# This is to ensure all processes have completed on SMP machines:
-wait
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.K b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.K
deleted file mode 100755
index 00a1501..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.K
+++ /dev/null
@@ -1,88 +0,0 @@
-#! /bin/sh
-#
-# rc.K This file is executed by init when it goes into runlevel
-# 1, which is the administrative state. It kills all
-# daemons and then puts the system into single user mode.
-# Note that the file systems are kept mounted.
-#
-# Version: @(#)/etc/rc.d/rc.K 3.1415 Sat Jan 13 13:37:26 PST 2001
-#
-# Author: Miquel van Smoorenburg <miquels@drinkel.nl.mugnet.org>
-# Modified by: Patrick J. Volkerding <volkerdi@slackware.com>
-#
-
-# Set the path.
-PATH=/sbin:/bin:/usr/bin:/usr/sbin
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
- . /etc/rc.d/rc.sysvinit
-fi
-
-# Try to turn off quota:
-if grep -q quota /etc/fstab ; then
- if [ -x /sbin/quotaoff ]; then
- echo "Turning off filesystem quotas."
- /sbin/quotaoff -a
- fi
-fi
-
-# Try to turn off accounting:
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
- echo "Turning off accounting."
- /sbin/accton
-fi
-
-# Stop the Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
- /etc/rc.d/rc.httpd stop
-fi
-
-# Stop the Samba server:
-if [ -x /etc/rc.d/rc.samba ]; then
- . /etc/rc.d/rc.samba stop
-fi
-
-# Shut down the NFS server:
-if [ -x /etc/rc.d/rc.nfsd ]; then
- /etc/rc.d/rc.nfsd stop
-fi
-
-# Shut down PCMCIA devices:
-if [ -x /etc/rc.d/rc.pcmcia ] ; then
- . /etc/rc.d/rc.pcmcia stop
- # The cards might need a little extra time here to initialize.
- sleep 5
-fi
-
-# Kill all processes.
-echo
-echo "Sending all processes the SIGHUP signal."
-killall5 -1
-echo -n "Waiting for processes to hang up"
-for loop in 0 1 2 3 4 5 ; do
- sleep 1
- echo -n "."
-done
-echo
-echo "Sending all processes the SIGTERM signal."
-killall5 -15
-echo -n "Waiting for processes to terminate"
-for loop in 0 1 2 3 4 5 ; do
- sleep 1
- echo -n "."
-done
-echo
-echo "Sending all processes the SIGKILL signal."
-killall5 -9
-echo -n "Waiting for processes to exit"
-for loop in 0 1 2 3 4 5 ; do
- sleep 1
- echo -n "."
-done
-echo
-
-# Now go to the single user level
-echo "Going to single user mode..."
-telinit -t 1 1
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.M b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.M
deleted file mode 100755
index 0cb3343..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.M
+++ /dev/null
@@ -1,256 +0,0 @@
-#!/bin/sh
-#
-# rc.M This file is executed by init(8) when the system is being
-# initialized for one of the "multi user" run levels (i.e.
-# levels 1 through 6). It usually does mounting of file
-# systems et al.
-#
-# Version: @(#)/etc/rc.d/rc.M 2.23 Wed Feb 26 19:20:58 PST 2003
-#
-# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-# Heavily modified by Patrick Volkerding <volkerdi@slackware.com>
-#
-
-# Tell the viewers what's going to happen.
-echo "Going multiuser..."
-
-# Screen blanks after 15 minutes idle time, and powers down in one hour
-# if the kernel supports APM or ACPI power management:
-#/bin/setterm -blank 15 -powersave powerdown -powerdown 60
-
-# Set the hostname.
-#if [ -r /etc/HOSTNAME ]; then
-# /bin/hostname $(cat /etc/HOSTNAME | cut -f1 -d .)
-#else
- # fall back on this old default:
-# echo "darkstar.example.net" > /etc/HOSTNAME
-# /bin/hostname darkstar
-#fi
-
-# Save the contents of 'dmesg':
-#/bin/dmesg -s 65536 > /var/log/dmesg
-
-# Start the system logger.
-if [ -x /etc/rc.d/rc.syslog -a -x /usr/sbin/syslogd -a -d /var/log ]; then
- . /etc/rc.d/rc.syslog start
-fi
-
-# Initialize PCMCIA devices:
-#
-# NOTE: This used to be started near the top of rc.S so that PCMCIA devices
-# could be fsck'ed along with the other drives. This had some unfortunate
-# side effects, however, since root isn't yet read-write, and /var might not
-# even be mounted the .pid files can't be correctly written in /var/run and
-# the pcmcia system can't be correctly shut down. If you want some PCMCIA
-# partition to be mounted at boot (or when the card is inserted) then add
-# the appropriate lines to /etc/pcmcia/scsi.opts.
-#
-if [ -x /etc/rc.d/rc.pcmcia ] ; then
- . /etc/rc.d/rc.pcmcia start
- # The cards might need a little extra time here to initialize.
- if [ -r /var/run/cardmgr.pid ]; then
- sleep 5
- fi
-fi
-
-# Initialize the networking hardware. If your network driver is a module
-# and you haven't loaded it manually, this will be deferred until after
-# the hotplug system loads the module below.
-#if [ -x /etc/rc.d/rc.inet1 ]; then
-# . /etc/rc.d/rc.inet1
-#fi
-
-# Initialize the hotplugging subsystem for Cardbus, IEEE1394, PCI, and USB devices:
-if [ -x /etc/rc.d/rc.hotplug -a -r /proc/modules ]; then
- # Don't run hotplug if 'nohotplug' was given at boot.
- if ! grep nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
- echo "Activating hardware detection: /etc/rc.d/rc.hotplug start"
- . /etc/rc.d/rc.hotplug start
- fi
-fi
-
-# Start networking daemons:
-if [ -x /etc/rc.d/rc.inet2 ]; then
- . /etc/rc.d/rc.inet2
-fi
-
-# Remove stale locks and junk files (must be done after mount -a!)
-/bin/rm -f /var/lock/* /var/spool/uucp/LCK..* /tmp/.X*lock /tmp/core /core 2> /dev/null
-
-# Remove stale hunt sockets so the game can start.
-if [ -r /tmp/hunt -o -r /tmp/hunt.stats ]; then
- echo "Removing your stale hunt sockets from /tmp."
- /bin/rm -f /tmp/hunt*
-fi
-
-# Ensure basic filesystem permissions sanity.
-chmod 755 / 2> /dev/null
-chmod 1777 /tmp /var/tmp
-
-# Update all the shared library links:
-if [ -x /sbin/ldconfig ]; then
- echo "Updating shared library links: /sbin/ldconfig"
- /sbin/ldconfig
-fi
-
-# Update the X font indexes:
-if [ -x /usr/X11R6/bin/fc-cache ]; then
- echo "Updating X font indexes: /usr/X11R6/bin/fc-cache"
- /usr/X11R6/bin/fc-cache
-fi
-
-# Start the print spooling system. This will usually be LPRng (lpd) or CUPS.
-if [ -x /etc/rc.d/rc.cups ]; then
- # Start CUPS:
- /etc/rc.d/rc.cups start
-elif [ -x /etc/rc.d/rc.lprng ]; then
- # Start LPRng (lpd):
- . /etc/rc.d/rc.lprng start
-fi
-
-# Start netatalk. (a file/print server for Macs using Appletalk)
-if [ -x /etc/rc.d/rc.atalk ]; then
- /etc/rc.d/rc.atalk
-fi
-
-# Start smartd, which monitors the status of S.M.A.R.T. compatible
-# hard drives and reports any problems. Note some devices (which aren't
-# smart, I guess ;) will hang if probed by smartd, so it's commented out
-# by default.
-#if [ -x /usr/sbin/smartd ]; then
-# /usr/sbin/smartd
-#fi
-
-# Monitor the UPS with genpowerd.
-# To use this, uncomment this section and edit your settings in
-# /etc/genpowerd.conf (serial device, UPS type, etc). For more information,
-# see "man genpowerd" or the extensive documentation in the
-# /usr/doc/genpower-1.0.3 directory.
-# You'll also need to configure a similar block in /etc/rc.d/rc.6 if you want
-# support for stopping the UPS's inverter after the machine halts.
-#if [ -x /sbin/genpowerd ]; then
-# echo "Starting genpowerd daemon..."
-# /sbin/genpowerd
-#fi
-
-# Turn on process accounting. To enable process accounting, make sure the
-# option for BSD process accounting is enabled in your kernel, and then
-# create the file /var/log/pacct (touch /var/log/pacct). By default, process
-# accounting is not enabled (since /var/log/pacct does not exist). This is
-# because the log file can get VERY large.
-if [ -x /sbin/accton -a -r /var/log/pacct ]; then
- /sbin/accton /var/log/pacct
- chmod 640 /var/log/pacct
- echo "Process accounting turned on."
-fi
-
-# Start crond (Dillon's crond):
-# If you want cron to actually log activity to /var/log/cron, then change
-# -l10 to -l8 to increase the logging level.
-if [ -x /usr/sbin/crond ]; then
- /usr/sbin/crond -l10 >>/var/log/cron 2>&1
-fi
-
-# Start atd (manages jobs scheduled with 'at'):
-if [ -x /usr/sbin/atd ]; then
- /usr/sbin/atd -b 15 -l 1
-fi
-
-# Slackware-Mini-Quota-HOWTO:
-# To really activate quotas, you'll need to add 'usrquota' and/or 'grpquota' to
-# the appropriate partitions as listed in /etc/fstab. Here's an example:
-#
-# /dev/hda2 /home ext3 defaults,usrquota 1 1
-#
-# You'll then need to setup initial quota files at the top of the partitions
-# to support quota, like this:
-# touch /home/aquota.user /home/aquota.group
-# chmod 600 /home/aquota.user /home/aquota.group
-#
-# Then, reboot to activate the system.
-# To edit user quotas, use 'edquota'. See 'man edquota'. Also, the
-# official Quota Mini-HOWTO has lots of useful information. That can be found
-# here: /usr/doc/Linux-HOWTOs/Quota
-
-# Check quotas and then turn quota system on:
-if grep -q quota /etc/fstab ; then
- if [ -x /sbin/quotacheck ]; then
- echo "Checking filesystem quotas: /sbin/quotacheck -avugm"
- /sbin/quotacheck -avugm
- fi
- if [ -x /sbin/quotaon ]; then
- echo "Activating filesystem quotas: /sbin/quotaon -avug"
- /sbin/quotaon -avug
- fi
-fi
-
-# Start the sendmail daemon:
-if [ -x /etc/rc.d/rc.sendmail ]; then
- . /etc/rc.d/rc.sendmail start
-fi
-
-# Start the APM daemon if APM is enabled in the kernel:
-if [ -x /usr/sbin/apmd ]; then
- if cat /proc/apm 1> /dev/null 2> /dev/null ; then
- echo "Starting APM daemon: /usr/sbin/apmd"
- /usr/sbin/apmd
- fi
-fi
-
-# Start the ACPI (Advanced Configuration and Power Interface) daemon:
-if [ -x /etc/rc.d/rc.acpid ]; then
- . /etc/rc.d/rc.acpid start
-fi
-
-# Load ALSA (sound) defaults:
-if [ -x /etc/rc.d/rc.alsa ]; then
- . /etc/rc.d/rc.alsa
-fi
-
-# Load a custom screen font if the user has an rc.font script.
-if [ -x /etc/rc.d/rc.font ]; then
- . /etc/rc.d/rc.font
-fi
-
-# Load a custom keymap if the user has an rc.keymap script.
-if [ -x /etc/rc.d/rc.keymap ]; then
- . /etc/rc.d/rc.keymap
-fi
-
-# Initialize HP Officejet support:
-if [ -x /etc/rc.d/rc.hpoj ]; then
- . /etc/rc.d/rc.hpoj start
-fi
-
-# Start the MySQL database:
-if [ -x /etc/rc.d/rc.mysqld ]; then
- . /etc/rc.d/rc.mysqld start
-fi
-
-# Start Apache web server:
-if [ -x /etc/rc.d/rc.httpd ]; then
- . /etc/rc.d/rc.httpd start
-fi
-
-# Start Samba (a file/print server for Win95/NT machines).
-# Samba can be started in /etc/inetd.conf instead.
-if [ -x /etc/rc.d/rc.samba ]; then
- . /etc/rc.d/rc.samba start
-fi
-
-# Start the GPM mouse server:
-if [ -x /etc/rc.d/rc.gpm ]; then
- . /etc/rc.d/rc.gpm start
-fi
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
- . /etc/rc.d/rc.sysvinit
-fi
-
-# Start the local setup procedure.
-if [ -x /etc/rc.d/rc.local ]; then
- . /etc/rc.d/rc.local
-fi
-
-# All done.
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.S b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.S
deleted file mode 100755
index 05c75b4..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.S
+++ /dev/null
@@ -1,294 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.S: System initialization script.
-#
-# Mostly written by: Patrick J. Volkerding, <volkerdi@slackware.com>
-#
-
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-
-# Mount /proc right away:
-/sbin/mount -v proc /proc -n -t proc
-
-# If 'nohotplug' was given at boot, or rc.hotplug has been turned off
-# (is not executable), then shut off hotplugging in the kernel now.
-# Turning off hotplug is *not* recommended, and will break some things.
-if [ -w /proc/sys/kernel/hotplug ]; then
- if grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
- echo "/dev/null" > /proc/sys/kernel/hotplug
- elif [ ! -x /etc/rc.d/rc.hotplug ]; then
- echo "/dev/null" > /proc/sys/kernel/hotplug
- fi
-fi
-
-# Start devfsd if necessary. On newer kernels, udev should be used instead.
-if [ -x /etc/rc.d/rc.devfsd ]; then
- /etc/rc.d/rc.devfsd start
-fi
-
-# Mount sysfs next, if the kernel supports it:
-if [ -d /sys ]; then
- if cat /proc/filesystems | grep -w sysfs 1> /dev/null 2> /dev/null ; then
- if ! cat /proc/mounts | grep -w sysfs 1> /dev/null 2> /dev/null ; then
- /sbin/mount -v sysfs /sys -n -t sysfs
- fi
- fi
-fi
-
-# Initialize udev to manage /dev entries for 2.6.x kernels:
-if [ -x /etc/rc.d/rc.udev ]; then
- if ! grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
- /etc/rc.d/rc.udev
- fi
-fi
-
-# Enable swapping:
-/sbin/swapon -a
-
-# Test to see if the root partition is read-only, like it ought to be.
-READWRITE=no
-if touch /fsrwtestfile 2>/dev/null; then
- rm -f /fsrwtestfile
- READWRITE=yes
-else
- echo "Testing root filesystem status: read-only filesystem"
-fi
-
-# See if a forced filesystem check was requested at shutdown:
-if [ -r /etc/forcefsck ]; then
- FORCEFSCK="-f"
-fi
-
-# Check the root filesystem:
-if [ ! $READWRITE = yes ]; then
- RETVAL=0
- if [ ! -r /etc/fastboot ]; then
- echo "Checking root filesystem:"
- /sbin/fsck $FORCEFSCK -C -a /
- RETVAL=$?
- fi
- # An error code of 2 or higher will require a reboot.
- if [ $RETVAL -ge 2 ]; then
- # An error code equal to or greater than 4 means that some errors
- # could not be corrected. This requires manual attention, so we
- # offer a chance to try to fix the problem in single-user mode:
- if [ $RETVAL -ge 4 ]; then
- echo
- echo "***********************************************************"
- echo "*** An error occurred during the root filesystem check. ***"
- echo "*** You will now be given a chance to log into the ***"
- echo "*** system in single-user mode to fix the problem. ***"
- echo "*** ***"
- echo "*** If you are using the ext2 filesystem, running ***"
- echo "*** 'e2fsck -v -y <partition>' might help. ***"
- echo "***********************************************************"
- echo
- echo "Once you exit the single-user shell, the system will reboot."
- echo
- PS1="(Repair filesystem) \#"; export PS1
- sulogin
- else # With an error code of 2 or 3, reboot the machine automatically:
- echo
- echo "***********************************"
- echo "*** The filesystem was changed. ***"
- echo "*** The system will now reboot. ***"
- echo "***********************************"
- echo
- fi
- echo "Unmounting file systems."
- /sbin/umount -a -r
- /sbin/mount -n -o remount,ro /
- echo "Rebooting system."
- sleep 2
- reboot -f
- fi
- # Remount the root filesystem in read-write mode
- echo "Remounting root device with read-write enabled."
- /sbin/mount -w -v -n -o remount /
- if [ $? -gt 0 ] ; then
- echo
- echo "Attempt to remount root device as read-write failed! This is going to"
- echo "cause serious problems."
- echo
- echo "If you're using the UMSDOS filesystem, you **MUST** mount the root partition"
- echo "read-write! You can make sure the root filesystem is getting mounted "
- echo "read-write with the 'rw' flag to Loadlin:"
- echo
- echo "loadlin vmlinuz root=/dev/hda1 rw (replace /dev/hda1 with your root device)"
- echo
- echo "Normal bootdisks can be made to mount a system read-write with the rdev command:"
- echo
- echo "rdev -R /dev/fd0 0"
- echo
- echo "You can also get into your system by using a boot disk with a command like this"
- echo "on the LILO prompt line: (change the root partition name as needed)"
- echo
- echo "LILO: mount root=/dev/hda1 rw"
- echo
- echo "Please press ENTER to continue, then reboot and use one of the above methods to"
- echo -n "get into your machine and start looking for the problem. "
- read junk;
- fi
-else
- echo "Testing root filesystem status: read-write filesystem"
- if cat /etc/fstab | grep ' / ' | grep umsdos 1> /dev/null 2> /dev/null ; then
- ROOTTYPE="umsdos"
- fi
- if [ ! "$ROOTTYPE" = "umsdos" ]; then # no warn for UMSDOS
- echo
- echo "*** ERROR: Root partition has already been mounted read-write. Cannot check!"
- echo
- echo "For filesystem checking to work properly, your system must initially mount"
- echo "the root partition as read only. Please modify your kernel with 'rdev' so that"
- echo "it does this. If you're booting with LILO, add a line:"
- echo
- echo " read-only"
- echo
- echo "to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it."
- echo
- echo "If you boot from a kernel on a floppy disk, put it in the drive and type:"
- echo " rdev -R /dev/fd0 1"
- echo
- echo "If you boot from a bootdisk, or with Loadlin, you can add the 'ro' flag."
- echo
- echo "This will fix the problem *AND* eliminate this annoying message. :^)"
- echo
- echo -n "Press ENTER to continue. "
- read junk;
- fi
-fi # Done checking root filesystem
-
-# Any /etc/mtab that exists here is old, so we delete it to start over:
-/bin/rm -f /etc/mtab*
-# Remounting the / partition will initialize the new /etc/mtab:
-/sbin/mount -w -o remount /
-
-# Fix /etc/mtab to list sys and proc if they were not yet entered in
-# /etc/mtab because / was still mounted read-only:
-if [ -d /proc/sys ]; then
- /sbin/mount -f proc /proc -t proc
-fi
-if [ -d /sys/bus ]; then
- /sbin/mount -f sysfs /sys -t sysfs
-fi
-
-# Set the system time from the hardware clock using hwclock --hctosys.
-if [ -x /sbin/hwclock ]; then
- if grep "^UTC" /etc/hardwareclock 1> /dev/null 2> /dev/null ; then
- echo "Setting system time from the hardware clock (UTC)."
- /sbin/hwclock --utc --hctosys
- else
- echo "Setting system time from the hardware clock (localtime)."
- /sbin/hwclock --localtime --hctosys
- fi
-fi
-
-# Configure ISA Plug-and-Play devices:
-if [ -r /etc/isapnp.conf ]; then
- if [ -x /sbin/isapnp ]; then
- /sbin/isapnp /etc/isapnp.conf
- fi
-fi
-
-# This loads any kernel modules that are needed. These might be required to
-# use your ethernet card, sound card, or other optional hardware.
-if [ -x /etc/rc.d/rc.modules -a -r /proc/modules ]; then
- . /etc/rc.d/rc.modules
-fi
-
-# Configure runtime kernel parameters:
-if [ -x /sbin/sysctl -a -r /etc/sysctl.conf ]; then
- /sbin/sysctl -e -p /etc/sysctl.conf
-fi
-
-# Initialize the Logical Volume Manager.
-# This won't start unless we find /etc/lvmtab (LVM1) or
-# /etc/lvm/backup/ (LVM2). This is created by /sbin/vgscan, so to
-# use LVM you must run /sbin/vgscan yourself the first time (and
-# create some VGs and LVs).
-if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
- echo "Initializing LVM (Logical Volume Manager):"
- # Check for device-mapper support.
- if ! cat /proc/devices | grep -w device-mapper 1> /dev/null 2> /dev/null ; then
- # If device-mapper exists as a module, try to load it.
- if [ -r /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko ]; then
- insmod /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko
- fi
- fi
- # Scan for new volume groups:
- /sbin/vgscan 2> /dev/null
- if [ $? = 0 ]; then
- # This needs a moment to register.
- sleep 10
- # Make volume groups available to the kernel.
- # This should also make logical volumes available.
- /sbin/vgchange -ay
- # Enable swapping again in case any LVs are used for swap. Ignore previous error. :-)
- /sbin/swapon -a
- fi
-fi
-
-# Check all the non-root filesystems:
-if [ ! -r /etc/fastboot ]; then
- echo "Checking non-root filesystems:"
- /sbin/fsck $FORCEFSCK -C -R -A -a
-fi
-
-# mount non-root file systems in fstab (but not NFS or SMB
-# because TCP/IP is not yet configured, and not proc because
-# that has already been mounted):
-/sbin/mount -a -v -t nonfs,nosmbfs,noproc
-
-# Clean up some temporary files:
-( cd /var/log/setup/tmp && rm -rf * )
-/bin/rm -f /var/run/utmp /var/run/*pid /etc/nologin /var/run/lpd* \
- /var/run/ppp* /etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot
-
-# Attempt to umount and remove any leftover /initrd:
-if [ -d /initrd ]; then
- /sbin/umount /initrd 2> /dev/null
- rmdir /initrd 2> /dev/null
- blockdev --flushbufs /dev/ram0 2> /dev/null
-fi
-
-# Create a fresh utmp file:
-touch /var/run/utmp
-chown root.utmp /var/run/utmp
-chmod 664 /var/run/utmp
-
-if [ "$ROOTTYPE" = "umsdos" ]; then # we need to update any files added in DOS:
- echo "Synchronizing UMSDOS directory structure:"
- echo " /sbin/umssync -r99 -v- /"
- /sbin/umssync -r99 -v- /
-fi
-
-# Setup the /etc/motd to reflect the current kernel level:
-# THIS WIPES ANY CHANGES YOU MAKE TO /ETC/MOTD WITH EACH BOOT.
-# COMMENT THIS OUT IF YOU WANT TO MAKE A CUSTOM VERSION.
-echo "$(/bin/uname -sr)." > /etc/motd
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
- . /etc/rc.d/rc.sysvinit
-fi
-
-# Run serial port setup script:
-# (CAREFUL! This can make some systems hang if the rc.serial script isn't
-# set up correctly. If this happens, you may have to edit the file from a
-# boot disk)
-#
-# . /etc/rc.d/rc.serial
-
-# Carry an entropy pool between reboots to improve randomness.
-if [ -f /etc/random-seed ]; then
- echo "Using /etc/random-seed to initialize /dev/urandom."
- cat /etc/random-seed > /dev/urandom
-fi
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
- dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
- dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-chmod 600 /etc/random-seed
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.httpd b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.httpd
deleted file mode 100644
index 00b8837..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.httpd
+++ /dev/null
@@ -1,21 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.httpd
-#
-# Start/stop/restart the Apache web server.
-#
-# To make Apache start automatically at boot, make this
-# file executable: chmod 755 /etc/rc.d/rc.httpd
-#
-
-case "$1" in
- 'start')
- /usr/sbin/apachectl start ;;
- 'stop')
- /usr/sbin/apachectl stop ;;
- 'restart')
- /usr/sbin/apachectl restart ;;
- *)
- echo "usage $0 start|stop|restart" ;;
-esac
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.inet2 b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.inet2
deleted file mode 100755
index db56589..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.inet2
+++ /dev/null
@@ -1,129 +0,0 @@
-#!/bin/sh
-#
-# rc.inet2 This shell script boots up the entire network system.
-# Note, that when this script is used to also fire
-# up any important remote NFS disks (like the /usr
-# directory), care must be taken to actually
-# have all the needed binaries online _now_ ...
-#
-# Uncomment or comment out sections depending on which
-# services your site requires.
-#
-# Author: Fred N. van Kempen, <waltje@uwalt.nl.mugnet.org>
-# Modified for Slackware by Patrick Volkerding <volkerdi@slackware.com>
-
-
-# At this point, we are ready to talk to The World...
-
-
-# Mount remote (NFS) filesystems:
-if cat /etc/fstab | grep -v '^#' | grep -w nfs 1> /dev/null 2> /dev/null ; then
- # Start the RPC portmapper if we find NFS volumes defined in /etc/fstab,
- # since it will need to be running in order to mount them. If portmap
- # is not running, attempting to mount an NFS partition will cause mount
- # to hang. Keep this in mind if you plan to mount unlisted partitions...
- if [ -x /etc/rc.d/rc.portmap ]; then
- . /etc/rc.d/rc.portmap start
- else
- # Warn about a possible NFS problem. It's also possible to mount NFS partitions
- # without rpc.portmap by using '-o nolock' (not a good idea in most cases).
- echo "WARNING: NFS partitions found in /etc/fstab, but /etc/rc.d/rc.portmap is"
- echo " not executable. If you do not run portmap, NFS partitions will"
- echo " not mount properly. To start rpc.portmap at boot, change the"
- echo " permissions on /etc/rc.d/rc.portmap: chmod 755 /etc/rc.d/rc.portmap"
- sleep 10
- fi
- echo "Mounting remote (NFS) file systems: /sbin/mount -a -t nfs"
- /sbin/mount -a -t nfs # This may be our /usr runtime!
- # Show the mounted volumes:
- /sbin/mount -v -t nfs
-fi
-
-# Load the RPC portmapper if /etc/rc.d/rc.portmap is executable.
-# This might be needed to mount NFS partitions that are not listed in /etc/fstab.
-if [ -x /etc/rc.d/rc.portmap ]; then
- . /etc/rc.d/rc.portmap start
-fi
-
-# Mount remote (SMB) filesystems:
-if cat /etc/fstab | grep -v '^#' | grep -w smbfs 1> /dev/null 2> /dev/null ; then
- echo "Mounting remote (SMB) file systems: /sbin/mount -a -t smbfs"
- /sbin/mount -a -t smbfs
- # Show the mounted volumes:
- /sbin/mount -v -t smbfs
-fi
-
-# Start the system logger if it is not already running (maybe because /usr
-# is on a network partition).
-if [ -x /etc/rc.d/rc.syslog -a -d /var/log -a ! -r /var/run/syslogd.pid ]; then
- . /etc/rc.d/rc.syslog start
-fi
-
-# If there is a firewall script, run it before enabling packet forwarding.
-# See the HOWTOs on http://www.netfilter.org/ for documentation on
-# setting up a firewall or NAT on Linux. In some cases this might need to
-# be moved past the section below dealing with IP packet forwarding.
-if [ -x /etc/rc.d/rc.firewall ]; then
- /etc/rc.d/rc.firewall start
-fi
-
-# Turn on IPv4 packet forwarding support.
-if [ -x /etc/rc.d/rc.ip_forward ]; then
- . /etc/rc.d/rc.ip_forward start
-fi
-
-# Start the inetd server:
-if [ -x /etc/rc.d/rc.inetd ]; then
- /etc/rc.d/rc.inetd start
-fi
-
-# Start the OpenSSH SSH daemon:
-if [ -x /etc/rc.d/rc.sshd ]; then
- echo "Starting OpenSSH SSH daemon: /usr/sbin/sshd"
- /etc/rc.d/rc.sshd start
-fi
-
-# Start the BIND name server daemon:
-if [ -x /etc/rc.d/rc.bind ]; then
- /etc/rc.d/rc.bind start
-fi
-
-# Start NIS (the Network Information Service):
-if [ -x /etc/rc.d/rc.yp ]; then
- . /etc/rc.d/rc.yp start
-fi
-
-# Start the NFS server. Note that for this to work correctly, you'll
-# need to load the knfsd module for kernel NFS server support.
-# You'll also need to set up some shares in /etc/exports, and be sure
-# that /etc/rc.d/rc.portmap is executable.
-# Starting the NFS server:
-if [ -x /etc/rc.d/rc.nfsd ]; then
- /etc/rc.d/rc.nfsd start
-fi
-
-# Stuff you won't need follows. ;-)
-
-# # Start the network routing daemon:
-# if [ -x /usr/sbin/routed ]; then
-# echo "Starting network routing daemon: /usr/sbin/routed"
-# /usr/sbin/routed -g -s
-# fi
-
-# # Start the system status server:
-# if [ -x /usr/sbin/rwhod ]; then
-# echo "Starting system status server: /usr/sbin/rwhod"
-# /usr/sbin/rwhod
-# fi
-
-# # Fire up the PC-NFS daemon(s). This is a primarily obsolete system, and may
-# # not be very secure. It's not at all needed for normal NFS server support.
-# # You probably should not run this.
-# if [ -x /usr/sbin/rpc.pcnfsd ]; then
-# echo "Starting PC-NFS daemons: /usr/sbin/rpc.pcnfsd /usr/sbin/rpc.bwnfsd"
-# /usr/sbin/rpc.pcnfsd /var/spool/lpd
-# fi
-# if [ -x /usr/sbin/rpc.bwnfsd ]; then
-# /usr/sbin/rpc.bwnfsd /var/spool/lpd
-# fi
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.inetd b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.inetd
deleted file mode 100644
index 9fe1419..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.inetd
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-# Start/stop/restart inetd, the BSD Internet super-daemon.
-
-# Start inetd:
-inetd_start() {
- if [ -x /usr/sbin/inetd ]; then
- echo "Starting Internet super-server daemon: /usr/sbin/inetd"
- /usr/sbin/inetd
- fi
-}
-
-# Stop inetd:
-inetd_stop() {
- killall inetd
-}
-
-# Restart inetd:
-inetd_restart() {
- inetd_stop
- sleep 1
- inetd_start
-}
-
-case "$1" in
-'start')
- inetd_start
- ;;
-'stop')
- inetd_stop
- ;;
-'restart')
- inetd_restart
- ;;
-*)
- echo "usage $0 start|stop|restart"
-esac
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward
deleted file mode 100644
index 52bd2fe..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/sh
-# /etc/rc.d/rc.ip_forward: start/stop IP packet forwarding
-#
-# If you intend to run your Linux box as a router, i.e. as a
-# computer that forwards and redistributes network packets, you
-# will need to enable IP packet forwarding in your kernel.
-#
-# To activate IP packet forwarding at boot time, make this
-# script executable: chmod 755 /etc/rc.d/rc.ip_forward
-#
-# To disable IP packet forwarding at boot time, make this
-# script non-executable: chmod 644 /etc/rc.d/rc.ip_forward
-
-# Start IP packet forwarding:
-ip_forward_start() {
- if [ -f /proc/sys/net/ipv4/ip_forward ]; then
- echo "Activating IPv4 packet forwarding."
- echo 1 > /proc/sys/net/ipv4/ip_forward
- fi
- # When using IPv4 packet forwarding, you will also get the
- # rp_filter, which automatically rejects incoming packets if the
- # routing table entry for their source address doesn't match the
- # network interface they're arriving on. This has security
- # advantages because it prevents the so-called IP spoofing,
- # however it can pose problems if you use asymmetric routing
- # (packets from you to a host take a different path than packets
- # from that host to you) or if you operate a non-routing host
- # which has several IP addresses on different interfaces. To
- # turn rp_filter off, uncomment the lines below:
- #if [ -r /proc/sys/net/ipv4/conf/all/rp_filter ]; then
- # echo "Disabling rp_filter."
- # echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
- #fi
-}
-
-# Stop IP packet forwarding:
-ip_forward_stop() {
- if [ -f /proc/sys/net/ipv4/ip_forward ]; then
- echo "Disabling IPv4 packet forwarding."
- echo 0 > /proc/sys/net/ipv4/ip_forward
- fi
-}
-
-# Restart IP packet forwarding:
-ip_forward_restart() {
- ip_forward_stop
- sleep 1
- ip_forward_start
-}
-
-case "$1" in
-'start')
- ip_forward_start
- ;;
-'stop')
- ip_forward_stop
- ;;
-'restart')
- ip_forward_restart
- ;;
-*)
- echo "usage $0 start|stop|restart"
-esac
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.local b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.local
deleted file mode 100755
index 3cf2076..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.local
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.local: Local system initialization script.
-#
-# Put any local setup commands in here:
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.mysqld b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.mysqld
deleted file mode 100644
index 239e2e6..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.mysqld
+++ /dev/null
@@ -1,80 +0,0 @@
-#!/bin/sh
-# Start/stop/restart mysqld.
-#
-# Copyright 2003 Patrick J. Volkerding, Concord, CA
-# Copyright 2003 Slackware Linux, Inc., Concord, CA
-#
-# This program comes with NO WARRANTY, to the extent permitted by law.
-# You may redistribute copies of this program under the terms of the
-# GNU General Public License.
-
-# To start MySQL automatically at boot, be sure this script is executable:
-# chmod 755 /etc/rc.d/rc.mysqld
-
-# Before you can run MySQL, you must have a database. To install an initial
-# database, do this as root:
-#
-# su - mysql
-# mysql_install_db
-#
-# Note that step one is becoming the mysql user. It's important to do this
-# before making any changes to the database, or mysqld won't be able to write
-# to it later (this can be fixed with 'chown -R mysql.mysql /var/lib/mysql').
-
-# To disallow outside connections to the database (if you don't need them, this
-# is recommended to increase security), uncomment the next line:
-#SKIP="--skip-networking"
-
-# Start mysqld:
-mysqld_start() {
- if [ -x /usr/bin/mysqld_safe ]; then
- # If there is an old PID file (no mysqld running), clean it up:
- if [ -r /var/run/mysql/mysql.pid ]; then
- if ! ps ax | grep mysqld 1> /dev/null 2> /dev/null ; then
- echo "Cleaning up old /var/run/mysql/mysql.pid."
- rm -f /var/run/mysql/mysql.pid
- fi
- fi
- /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid $SKIP &
- fi
-}
-
-# Stop mysqld:
-mysqld_stop() {
- # If there is no PID file, ignore this request...
- if [ -r /var/run/mysql/mysql.pid ]; then
- killall mysqld
- # Wait at least one minute for it to exit, as we don't know how big the DB is...
- for second in 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 \
- 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 60 ; do
- if [ ! -r /var/run/mysql/mysql.pid ]; then
- break;
- fi
- sleep 1
- done
- if [ "$second" = "60" ]; then
- echo "WARNING: Gave up waiting for mysqld to exit!"
- sleep 15
- fi
- fi
-}
-
-# Restart mysqld:
-mysqld_restart() {
- mysqld_stop
- mysqld_start
-}
-
-case "$1" in
-'start')
- mysqld_start
- ;;
-'stop')
- mysqld_stop
- ;;
-'restart')
- mysqld_restart
- ;;
-*)
- echo "usage $0 start|stop|restart"
-esac
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.postfix b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.postfix
deleted file mode 100644
index bc32367..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.postfix
+++ /dev/null
@@ -1,45 +0,0 @@
-#!/bin/sh
-#
-## Slackware init script for postfix
-## 20030828 Manolis Tzanidakis
-#
-
-postfix_start() {
- if [ -x /usr/sbin/postfix ]; then
- echo -n "Starting postfix MTA: "
- echo "/usr/sbin/postfix start"
- /usr/sbin/postfix start 2>/dev/null
- fi
-}
-
-postfix_stop() {
- /usr/sbin/postfix stop 2>/dev/null
-}
-
-postfix_restart() {
- sh $0 stop
- sleep 1
- sh $0 start
-}
-
-postfix_reload() {
- /usr/sbin/postfix reload 2>/dev/null
-}
-
-case "$1" in
- 'start')
- postfix_start
- ;;
- 'stop')
- postfix_stop
- ;;
- 'restart')
- postfix_restart
- ;;
- 'reload')
- postfix_reload
- ;;
- *)
- echo "usage $0 start|stop|restart|reload"
-esac
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.sendmail b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.sendmail
deleted file mode 100644
index 1a31c52..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.sendmail
+++ /dev/null
@@ -1,38 +0,0 @@
-#!/bin/sh
-# Start/stop/restart sendmail.
-
-# Start sendmail:
-sendmail_start() {
- if [ -x /usr/sbin/sendmail ]; then
- echo "Starting sendmail MTA daemon: /usr/sbin/sendmail -L sm-mta -bd -q25m"
- /usr/sbin/sendmail -L sm-mta -bd -q25m
- echo "Starting sendmail MSP queue runner: /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m"
- /usr/sbin/sendmail -L sm-msp-queue -Ac -q25m
- fi
-}
-
-# Stop sendmail:
-sendmail_stop() {
- killall sendmail
-}
-
-# Restart sendmail:
-sendmail_restart() {
- sendmail_stop
- sleep 1
- sendmail_start
-}
-
-case "$1" in
-'start')
- sendmail_start
- ;;
-'stop')
- sendmail_stop
- ;;
-'restart')
- sendmail_restart
- ;;
-*)
- echo "usage $0 start|stop|restart"
-esac
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.serial b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.serial
deleted file mode 100755
index 5f31c01..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.serial
+++ /dev/null
@@ -1,132 +0,0 @@
-#
-# /etc/rc.serial
-# Initializes the serial ports on your system
-#
-# chkconfig: 2345 50 75
-# description: This initializes the settings of the serial port
-#
-# FILE_VERSION: 19981128
-#
-# Distributed with setserial and the serial driver. We need to use the
-# FILE_VERSION field to assure that we don't overwrite a newer rc.serial
-# file with a newer one.
-#
-# XXXX For now, the autosave feature doesn't work if you are
-# using the multiport feature; it doesn't save the multiport configuration
-# (for now). Autosave also doesn't work for the hayes devices.
-#
-
-RCLOCKFILE=/var/lock/subsys/serial
-DIRS="/lib/modules/`uname -r`/misc /lib/modules /usr/lib/modules ."
-PATH=/bin:/sbin:/usr/bin
-DRIVER=serial
-DRIVER_NAME=serial
-MODULE_REGEXP="serial\b"
-
-ALLDEVS="/dev/ttyS?"
-if /bin/ls /dev/ttyS?? >& /dev/null ; then
- ALLDEVS="$ALLDEVS /dev/ttyS??"
-fi
-
-SETSERIAL=""
-if test -x /bin/setserial ; then
- SETSERIAL=/bin/setserial
-elif test -x /sbin/setserial ; then
- SETSERIAL=/sbin/setserial
-fi
-
-#
-# See if the serial driver is loaded
-#
-LOADED=""
-if test -f /proc/devices; then
- if grep -q " ttyS$" /proc/devices ; then
- LOADED="yes"
- else
- LOADED="no"
- fi
-fi
-
-#
-# Find the serial driver
-#
-for i in $DIRS
-do
- if test -z "$MODULE" -a -f $i/$DRIVER.o ; then
- MODULE=$i/$DRIVER.o
- fi
-done
-
-if ! test -f /proc/modules ; then
- MODULE=""
-fi
-
-#
-# Handle System V init conventions...
-#
-case $1 in
-start)
- action="start";
- ;;
-stop)
- action="stop";
- ;;
-*)
- action="start";
-esac
-
-if test $action = stop ; then
- if test -n ${SETSERIAL} -a "$LOADED" != "no" -a \
- `head -1 /etc/serial.conf`X = "###AUTOSAVE###X" ; then
- echo -n "Saving state of serial devices... "
- grep "^#" /etc/serial.conf > /etc/.serial.conf.new
- ${SETSERIAL} -G -g ${ALLDEVS} >> /etc/.serial.conf.new
- mv /etc/serial.conf /etc/.serial.conf.old
- mv /etc/.serial.conf.new /etc/serial.conf
- echo "done."
- fi
- if test -n "$MODULE" ; then
- module=`grep $MODULE_REGEXP /proc/modules | awk '{print $1}'`
- if test -z "$module" ; then
- echo "The $DRIVER_NAME driver is not loaded."
- rm -f ${RCLOCKFILE}
- exit 0
- fi
- if rmmod $module ; then :; else
- echo "The $DRIVER_NAME driver could NOT be unloaded."
- exit 1;
- fi
- echo "The $DRIVER_NAME driver has been unloaded."
- fi
- rm -f ${RCLOCKFILE}
- exit 0
-fi
-
-#
-# If not stop, it must be a start....
-#
-
-if test -n "$MODULE" -a "$LOADED" != "yes" ; then
- if insmod -f $MODULE $DRIVER_ARG ; then
- true
- else
- echo "Couldn't load $DRIVER_NAME driver."
- exit 1
- fi
-fi
-
-if test -f /etc/serial.conf ; then
- if test -n ${SETSERIAL} ; then
- grep -v ^# < /etc/serial.conf | while read device args
- do
- if [ ! "$device" = "" -a ! "$args" = "" ]; then
- ${SETSERIAL} -z $device $args
- fi
- done
- fi
-else
- echo "###AUTOSAVE###" > /etc/serial.conf
-fi
-
-touch ${RCLOCKFILE}
-${SETSERIAL} -bg ${ALLDEVS}
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.sshd b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.sshd
deleted file mode 100755
index a3707e3..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.sshd
+++ /dev/null
@@ -1,50 +0,0 @@
-#!/bin/sh
-# Start/stop/restart the secure shell server:
-
-sshd_start() {
- # Create host keys if needed.
- if [ ! -r /etc/ssh/ssh_host_key ]; then
- /usr/bin/ssh-keygen -t rsa1 -f /etc/ssh/ssh_host_key -N ''
- fi
- if [ ! -f /etc/ssh/ssh_host_dsa_key ]; then
- /usr/bin/ssh-keygen -t dsa -f /etc/ssh/ssh_host_dsa_key -N ''
- fi
- if [ ! -f /etc/ssh/ssh_host_rsa_key ]; then
- /usr/bin/ssh-keygen -t rsa -f /etc/ssh/ssh_host_rsa_key -N ''
- fi
- /usr/sbin/sshd
-}
-
-sshd_stop() {
- killall sshd
-}
-
-sshd_restart() {
- if [ -r /var/run/sshd.pid ]; then
- echo "WARNING: killing listener process only. To kill every sshd process, you must"
- echo " use 'rc.sshd stop'. 'rc.sshd restart' kills only the parent sshd to"
- echo " allow an admin logged in through sshd to use 'rc.sshd restart' without"
- echo " being cut off. If sshd has been upgraded, new connections will now"
- echo " use the new version, which should be a safe enough approach."
- kill `cat /var/run/sshd.pid`
- else
- killall sshd
- fi
- sleep 1
- sshd_start
-}
-
-case "$1" in
-'start')
- sshd_start
- ;;
-'stop')
- sshd_stop
- ;;
-'restart')
- sshd_restart
- ;;
-*)
- echo "usage $0 start|stop|restart"
-esac
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.syslog b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.syslog
deleted file mode 100755
index a005fb7..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.syslog
+++ /dev/null
@@ -1,42 +0,0 @@
-#!/bin/sh
-# Start/stop/restart the system logging daemons.
-#
-# Written for Slackware Linux by Patrick J. Volkerding <volkerdi@slackware.com>.
-
-syslogd_start() {
- if [ -x /usr/sbin/syslogd -a -x /usr/sbin/klogd ]; then
- echo -n "Starting sysklogd daemons: "
- echo -n "/usr/sbin/syslogd "
- /usr/sbin/syslogd
- sleep 1 # prevent syslogd/klogd race condition on SMP kernels
- echo "/usr/sbin/klogd -c 3 -x"
- # '-c 3' = display level 'error' or higher messages on console
- # '-x' = turn off broken EIP translation
- /usr/sbin/klogd -c 3 -x
- fi
-}
-
-syslogd_stop() {
- killall syslogd 2> /dev/null
- killall klogd 2> /dev/null
-}
-
-syslogd_restart() {
- syslogd_stop
- sleep 1
- syslogd_start
-}
-
-case "$1" in
-'start')
- syslogd_start
- ;;
-'stop')
- syslogd_stop
- ;;
-'restart')
- syslogd_restart
- ;;
-*)
- echo "usage $0 start|stop|restart"
-esac
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.sysvinit b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.sysvinit
deleted file mode 100755
index 916e59e..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.sysvinit
+++ /dev/null
@@ -1,58 +0,0 @@
-#!/bin/sh
-#
-# rc.sysvinit This file provides basic compatibility with SystemV style
-# startup scripts. The SystemV style init system places
-# start/stop scripts for each runlevel into directories such as
-# /etc/rc.d/rc3.d/ (for runlevel 3) instead of starting them
-# from /etc/rc.d/rc.M. This makes for a lot more init scripts,
-# and a more complicated execution path to follow through if
-# something goes wrong. For this reason, Slackware has always
-# used the traditional BSD style init script layout.
-#
-# However, many binary packages exist that install SystemV
-# init scripts. With rc.sysvinit in place, most well-written
-# startup scripts will work. This is primarily intended to
-# support commercial software, though, and probably shouldn't
-# be considered bug free.
-#
-# Written by Patrick Volkerding <volkerdi@slackware.com>, 1999
-# from an example by Miquel van Smoorenburg <miquels@cistron.nl>.
-
-# Run an init script:
-startup() {
- case "$1" in
- *.sh)
- sh "$@"
- ;;
- *)
- "$@"
- ;;
- esac
-}
-
-# Set onlcr to avoid staircase effect.
-stty onlcr 0>&1
-
-if [ "$runlevel" = "" ]; then
- runlevel=$RUNLEVEL
- export runlevel
- prevlevel=$PREVLEVEL
- export prevlevel
-fi
-
-# Run kill scripts in the previous runlevel if not "none"
-if [ ! "$prevlevel" = "N" ]; then
- for script in /etc/rc.d/rc$prevlevel.d/K* ; do
- if [ -x $script ]; then
- startup $script stop
- fi
- done
-fi
-
-# Now do the startup scripts:
-for script in /etc/rc.d/rc$runlevel.d/S* ; do
- if [ -x $script ]; then
- startup $script start
- fi
-done
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rssh.conf b/branches/0.6/templates/vserver/vserver.d/etc/rssh.conf
deleted file mode 100644
index a74acc6..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rssh.conf
+++ /dev/null
@@ -1,48 +0,0 @@
-# This is the default rssh config file
-
-# set the log facility. "LOG_USER" and "user" are equivalent.
-logfacility = LOG_USER
-
-# Leave these all commented out to make the default action for rssh to lock
-# users out completely...
-
-allowscp
-allowsftp
-#allowcvs
-#allowrdist
-#allowrsync
-
-# set the default umask
-umask = 022
-
-# If you want to chroot users, use this to set the directory where the root of
-# the chroot jail will be located.
-#
-# if you DO NOT want to chroot users, LEAVE THIS COMMENTED OUT.
-# You can quote anywhere, but quotes not required unless path contains a
-# space... as in this example.
-
-chrootpath = "/var/users"
-
-##########################################
-# EXAMPLES of configuring per-user options
-
-#user=rudy:077:00010: # the path can simply be left out to not chroot
-#user=rudy:077:00010 # the ending colon is optional
-
-#spaces in the path must be quoted...
-#user=rudy:011:00001:"/usr/local/chroot dir" # scp with chroot
-#user=rudy:011:00010:"/usr/local/chroot dir" # sftp with chroot
-#user=rudy:011:00011:"/usr/local/chroot dir" # both with chroot
-#user=rudy:011:00100: # cvs, with no chroot
-#user=rudy:011:01000: # rdist, with no chroot
-#user=rudy:011:10000: # rsync, with no chroot
-#user="rudy:011:00001:/usr/local/chroot" # whole user string can be quoted
-#user=rudy:01"1:00001:/usr/local/chroot" # or somewhere in the middle, freak!
-#user=rudy:'011:00001:/usr/local/chroot' # single quotes too
-
-# Spaces before or after the '=' are fine, but spaces in chrootpath need
-# quotes.
-#user = "rudy:011:00001:/usr/local/chroot dir"
-#user = "rudy:011:00001:/usr/local/chroot dir" # neither do comments at line end
-
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/ssh/sshd_config b/branches/0.6/templates/vserver/vserver.d/etc/ssh/sshd_config
deleted file mode 100644
index a161fec..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/ssh/sshd_config
+++ /dev/null
@@ -1,103 +0,0 @@
-# $OpenBSD: sshd_config,v 1.69 2004/05/23 23:59:53 dtucker Exp $
-
-# This is the sshd server system-wide configuration file. See
-# sshd_config(5) for more information.
-
-# This sshd was compiled with PATH=/usr/local/sbin:/usr/sbin:/sbin:/usr/local/bin:/usr/bin:/bin
-
-# The strategy used for options in the default sshd_config shipped with
-# OpenSSH is to specify options with their default value where
-# possible, but leave them commented. Uncommented options change a
-# default value.
-
-#Port 22
-#Protocol 2,1
-#ListenAddress 0.0.0.0
-#ListenAddress ::
-
-# HostKey for protocol version 1
-#HostKey /etc/ssh/ssh_host_key
-# HostKeys for protocol version 2
-#HostKey /etc/ssh/ssh_host_rsa_key
-#HostKey /etc/ssh/ssh_host_dsa_key
-
-# Lifetime and size of ephemeral version 1 server key
-#KeyRegenerationInterval 1h
-#ServerKeyBits 768
-
-# Logging
-#obsoletes QuietMode and FascistLogging
-#SyslogFacility AUTH
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2m
-PermitRootLogin no
-#StrictModes yes
-#MaxAuthTries 6
-
-#RSAAuthentication yes
-#PubkeyAuthentication yes
-#AuthorizedKeysFile .ssh/authorized_keys
-
-# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#RhostsRSAAuthentication no
-# similar for protocol version 2
-#HostbasedAuthentication no
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# RhostsRSAAuthentication and HostbasedAuthentication
-#IgnoreUserKnownHosts no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
-
-# To disable tunneled clear text passwords, change to no here!
-#PasswordAuthentication yes
-#PermitEmptyPasswords no
-
-# Change to no to disable s/key passwords
-#ChallengeResponseAuthentication yes
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-
-# Set this to 'yes' to enable PAM authentication, account processing,
-# and session processing. If this is enabled, PAM authentication will
-# be allowed through the ChallengeResponseAuthentication mechanism.
-# Depending on your PAM configuration, this may bypass the setting of
-# PasswordAuthentication, PermitEmptyPasswords, and
-# "PermitRootLogin without-password". If you just want the PAM account and
-# session checks to run without PAM authentication, then enable this but set
-# ChallengeResponseAuthentication=no
-#UsePAM no
-
-#AllowTcpForwarding yes
-#GatewayPorts no
-#X11Forwarding no
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-#PrintMotd yes
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#UsePrivilegeSeparation yes
-#PermitUserEnvironment no
-#Compression yes
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#UseDNS yes
-#PidFile /var/run/sshd.pid
-#MaxStartups 10
-
-# no default banner path
-#Banner /some/path
-
-# override default of no subsystems
-Subsystem sftp /usr/libexec/sftp-server
diff --git a/branches/0.6/templates/vserver/vserver.d/var/www/htdocs/missing.html b/branches/0.6/templates/vserver/vserver.d/var/www/htdocs/missing.html
deleted file mode 100644
index 2762324..0000000
--- a/branches/0.6/templates/vserver/vserver.d/var/www/htdocs/missing.html
+++ /dev/null
@@ -1,12 +0,0 @@
-<html>
-<head>
-<title>404 - Not Found</title>
-</head>
-<body>
- <center>
- <pre>
- File not found.
- </pre>
- </center>
-</body>
-</html>
diff --git a/branches/0.6/templates/vserver/vserver.d/var/www/missing.html b/branches/0.6/templates/vserver/vserver.d/var/www/missing.html
deleted file mode 100644
index b2eec17..0000000
--- a/branches/0.6/templates/vserver/vserver.d/var/www/missing.html
+++ /dev/null
@@ -1,12 +0,0 @@
-<html>
-<head>
-<title>404 - Not Found</title>
-</head>
-<body>
- <center>
- <pre>
- O endere&ccedil;o que voc&ecirc; requisitou n&atilde;o p&ocirc;de ser encontrado :(
- </pre>
- </center>
-</body>
-</html>
diff --git a/branches/0.6/templates/vserver/vserver.perms b/branches/0.6/templates/vserver/vserver.perms
deleted file mode 100644
index 0c136ed..0000000
--- a/branches/0.6/templates/vserver/vserver.perms
+++ /dev/null
@@ -1,37 +0,0 @@
-./etc;0;0;755
-./etc/apache;0;0;755
-./etc/apache/httpd.conf;0;0;644
-./etc/apache/php.ini;0;0;644
-./etc/apache/vhosts;0;0;644
-./etc/logrotate.d;0;0;755
-./etc/logrotate.d/apache;0;0;644
-./etc/rc.d;0;0;755
-./etc/rc.d/rc.httpd;0;0;644
-./etc/rc.d/rc;0;0;755
-./etc/rc.d/rc.0;0;0;755
-./etc/rc.d/rc.4;0;0;644
-./etc/rc.d/rc.6;0;0;755
-./etc/rc.d/rc.K;0;0;755
-./etc/rc.d/rc.M;0;0;755
-./etc/rc.d/rc.S;0;0;755
-./etc/rc.d/rc.ip_forward;0;0;644
-./etc/rc.d/rc.inet2;0;0;755
-./etc/rc.d/rc.inetd;0;0;644
-./etc/rc.d/rc.mysqld;0;0;644
-./etc/rc.d/rc.local;0;0;755
-./etc/rc.d/rc.postfix;0;0;644
-./etc/rc.d/rc.sendmail;0;0;644
-./etc/rc.d/rc.serial;0;0;755
-./etc/rc.d/rc.sshd;0;0;755
-./etc/rc.d/rc.syslog;0;0;755
-./etc/rc.d/rc.sysvinit;0;0;755
-./etc/ssh;0;0;755
-./etc/ssh/sshd_config;0;0;644
-./etc/rssh.conf;0;0;644
-./etc/hosts;0;0;644
-./etc/profile;0;0;644
-./var;0;0;755
-./var/www;0;0;755
-./var/www/htdocs;0;0;755
-./var/www/htdocs/missing.html;0;0;644
-./var/www/missing.html;0;0;644
diff --git a/branches/0.6/templates/vserver/vserver.s/GPG-KEY b/branches/0.6/templates/vserver/vserver.s/GPG-KEY
deleted file mode 100644
index fd23e95..0000000
--- a/branches/0.6/templates/vserver/vserver.s/GPG-KEY
+++ /dev/null
@@ -1,88 +0,0 @@
-security@slackware.com public key
-
-Type bits/keyID Date User ID
-pub 1024D/40102233 2003-02-26 Slackware Linux Project <security@slackware.com>
-sub 1024g/4E523569 2003-02-26 [expires: 2012-12-21]
-
------BEGIN PGP PUBLIC KEY BLOCK-----
-Version: GnuPG v1.2.1 (GNU/Linux)
-
-mQGiBD5dIFQRBADB31WinbXdaGk/8RNkpnZclu1w3Xmd5ItACDLB2FhOhArw35EA
-MOYzxI0gRtDNWN4pn9n74q4HbFzyRWElThWRtBTYLEpImzrk7HYVCjMxjw5A0fTr
-88aiHOth5aS0vPAoq+3TYn6JDSipf2bR03G2JVwgj3Iu066pX4naivNm8wCgldHG
-F3y9vT3UPYh3QFgEUlCalt0D/3n6NopRYy0hMN6BPu+NarXwv6NQ9g0GV5FNjEEr
-igkrD/htqCyWAUl8zyCKKUFZZx4UGBRZ5guCdNzwgYH3yn3aVMhJYQ6tcSlLsj3f
-JIz4LAZ3+rI77rbn7gHHdp7CSAuV+QHv3aNanUD/KGz5SPSvF4w+5qRM4PfPNT1h
-LMV8BACzxiyX7vzeE4ZxNYvcuCtv0mvEHl9yD66NFA35RvXaO0QiRVYeoUa5JOQZ
-gwq+fIB0zgsEYDhXFkC1hM/QL4NccMRk8C09nFn4eiz4dAEnwKt4rLCJKhkLl1DW
-TSoXHe/dOXaLnFyLzB1J8hEYmUvw3SwPt//wMqDiVBLeZfFcdLQwU2xhY2t3YXJl
-IExpbnV4IFByb2plY3QgPHNlY3VyaXR5QHNsYWNrd2FyZS5jb20+iF8EExECAB8F
-Aj5dIFQFCRJ3owAECwcDAgMVAgMDFgIBAh4BAheAAAoJEGpEY8BAECIzee0An3My
-boalJ5nLePD0HCzMuf8Ix8gPAJ9lnU1wqNVGza0t89ACTurDoppQ2rkBDQQ+XSBV
-EAQA3VYlpPyRKdOKoM6t1SwNG0YgVFSvxy/eiratBf7misDBsJeH86Pf8H9OfVHO
-cqscLiC+iqvDgqeTUX9vASjlnvcoS/3H5TDPlxiifIDggqd2euNtJ8+lyXRBV6yP
-sBIA6zki9cR4zphe48hKpSsDfj7uL5sfyc2UmKKboSu3x7cAAwUD/1jmoLQs9bIt
-bTosoy+5+Uzrl0ShRlv+iZV8RPzAMFuRJNxUJkUmmThowtXRaPKFI9AVd+pP44aA
-J+zxCPtS2isiW20AxubJoBPpXcVatJWi4sG+TM5Z5VRoLg7tIDNVWsyHGXPAhIG2
-Y8Z1kyWwb4P8A/W2b1ZCqS7Fx4yEhTikiEwEGBECAAwFAj5dIFUFCRJ3owAACgkQ
-akRjwEAQIjM1uwCdE7V4mPCqdby/nV699NxKX0iW/OsAniaVhEip8Ptff74Sv4JV
-tb+Sth2l
-=H5uu
------END PGP PUBLIC KEY BLOCK-----
-
-slamd64 public key
-
------BEGIN PGP PUBLIC KEY BLOCK-----
-Version: GnuPG v1.2.6 (GNU/Linux)
-
-mQGiBELKSBYRBACiElxGMXqxUwdsQBKPngV6/k0Q5AYT34+WLL0B7XRR9kOotCfc
-PTLCP5qLM9etpzKhbMbgWGpaBrA/3KEPOJ7JVhk6JcLgjoi0QsMusaI4BGnmrxkw
-3mh9xPwc+jPgiYOljbZhNG6FMQtrdlKYV+BmwS8mt/YBymShghtlgdHJjwCg/PAG
-YJDsfoG1ebuwcjYlsGoD2x0EAJX7UnTdxxESvmIuk172MunZqw+o8+o/W684z13/
-wOkcVqvuAcd0ejuY0z09GFfyhtig8E55UcKNyVC50+3aJUXlt9//HnENHZo+OEN1
-ezbOXUcJIw8xkU551qaxubqWXtKYEJP9z/khVPe4N0JW2vWOcAFYhuOEx1ylaNrX
-gUY4BACDpn+pntq0ooZqkSPT4v1ibOQg/3xh2F1PgsnOahMRrXbVEdL9ItsVnHM/
-ygHBjLhkEMd612nVVSw1BYMBAwQbsYB8Lgn1QxXl0ISBYR1RYW1LvyaJM6A6TDL+
-EdWp+iTtlKOe/VD+oCfHmMONoucZJM2AtK1vXTX3x4Wb4MgVdLQoRnJlZGVyaWNr
-IEVtbW90dCA8bWFpbEBmcmVkZW1tb3R0LmNvLnVrPohkBBMRAgAkBQJCykgWAhsD
-BQkDwmcABgsJCAcDAgMVAgMDFgIBAh4BAheAAAoJEAd5Da1T/acLGfIAoOqIHrg4
-r2pq/tKi9VifOJS1xg4LAKDpi0I0pzsdDJ2owxCQ88MkoSDKgohMBBARAgAMBQJD
-Ed/tBYMDes8pAAoJEFgpV1AFAIOLprQAnRDVVmDPnzVNOWrZ8D55gG2bOwkxAKCl
-dGThnu0aQ0IEL7MgUETGtk4hS4iiBBABAgAMBQJDEdpDBYMDetTTAAoJEJugaRW/
-hasxqCwEAKczPTgOrRXXTs4piB14DayJQVgoqVgiNfKzd5qVuvQgYebQrMu7hi5U
-0q/n6TbQpjmMDZKxhXhEY1gs32mtzKKDrerTpF+pJAgQVvBLZS2mF4HbVnU74GvL
-2UKJtEtgb9u+i1Efd4Q8GIJUzLLJifURQWTk1e3B9qGApKXpWJlviEwEEBECAAwF
-AkMR75MFgwN6v4MACgkQTqjEwhXvPN1j7gCbBXZs9MM6YXGI/yTlEhiXyTECxm8A
-nj6O1XszSa5kaD7CvnRFzNkm5O5MiEwEEBECAAwFAkMR79UFgwN6v0EACgkQoLYC
-8AehV8eLBQCgv8WEdBtFjTh3Wl06WK5dKCw0nHsAn0IIHRbJC5jO4NWrIpupBMnz
-3fBsiEwEExECAAwFAkMR9ggFgwN6uQ4ACgkQR+ny47i1wzAfZQCfRACyfYBxs+tu
-6OzpLP2DGjEaa1UAnj4MVMH32f/34oN6o9dPKPT8HXWziEwEExECAAwFAkMR9vcF
-gwN6uB8ACgkQB0u7y43syeIaogCfVy7lqRjRDbttJs1u1g3FekdbJ1kAnRo726tA
-u8Xf+JWD3OrmMo0Uup3giEwEEBECAAwFAkMR+qgFgwN6tG4ACgkQfWXW5We1ioQk
-tgCePGa3NpcfEWb8drmO95Mp1C+FaBIAoNEqA89xUvTIpqooucTzFxgAupVgiEwE
-EBECAAwFAkMSF+UFgwN6lzEACgkQ/lREvmcCFhscDQCgnMxf4Nmu3B41GWupTWxb
-9b+te5sAoIiTZHzOSKtqN4cJ2i22iP/vZPt4iEwEEBECAAwFAkMULeAFgwN4gTYA
-CgkQsxZ93p+gHn6bcACgwY/5ZpvvEK+eycM5XNQhVI6w4j8An0JoXlFaGStIzUmW
-42obaW6CG4WViEYEExECAAYFAkMUZuAACgkQGnR+RTDgudhG1QCeJelEhnX/3JeW
-S5BaM7640suSeLQAnA2RDMH4zIJLI4MWEXBAvaA0lSr7iEwEEBECAAwFAkMUP8gF
-gwN4b04ACgkQM/XwBW70U1iAOwCgmah/GnZikIhyeFr6KsKpsmZCQTQAn3Vs7JZm
-w4qBLiI+RXxw7vIJlI4AiEwEEBECAAwFAkMUZ9EFgwN4R0UACgkQ72KcVAmwbhAC
-FACgiNqao9mzAWZBjIY7iiqz34gbK/QAn34F1bLAb0sHKiSUcFkVi/uZ8R0viEwE
-EBECAAwFAkMWFj8FgwN2mNcACgkQn3j4POjENGF+UgCeM+mEKW5+MjNN17QCAvZi
-cBVJEHMAn14YyvdSIwBBFUNPWYOw7GwYyAhHiEwEEBECAAwFAkMXW0cFgwN1U88A
-CgkQTxqZjtpq5iG4PwCfe2ymOYh5t+bEZGGCtJg3sWJ5hHYAmQGS+jGWcTMlXSe+
-65o/aPfLUkMQuQINBELKSCgQCADjG+pX7C0sRIkX1QQ6lFW3IrajWypXtd4jO1TA
-dlLFES7OxF202V15+TRtL9NO34x7u6RPTnF7wi/i2U1dqM9ZjrFcTJA17Y7+OLH+
-yw64/5OJapUi48qI7hnLRTPykz0c+b92pUt1X/BIWmf301jbZ0AbFZV4yvm1OUH4
-wrGLLFeATjiBWTcJarRiR89DzQ/Cm+c791WXdIhEvv5Vp4/d8HzGZhEUVKTCoA3e
-Z8ZIdJoy/d7FYfyeg836UDXEqr598n2p9DxMwkRj5oHINB64CrQuKr7zDdP8Zv2g
-vKkjeS4mN+07saWK3UTY5ADByNVHSu+P0LZYPhxjze7KOVjHAAUTCACa5ohR/7/N
-x2M2OB9VPAwQPjAFNst6fPotcFLDy5Q/jlbBcDNf1OdzgkE/06z7iPGRmIJL6flz
-QZH+hYwDqjulVVtPQXiZMVGvlfC9YIAdJX/1Ca2L9mL4c4IBQbFNkSlgkLaPTwUJ
-BD2PnA+q+ERy39UANhIR/LVGltK1krDds8CwbxMSYNFvFgf4dmh6GzI5ioByDoTM
-8ShfS2GjAekviNVLsGC5UWKuQl/XVaC/j7CTAT7WbikfXWI2uonFBx47vjf2UaPa
-E0HnAVwDY0cAZeaObpDKvyogsf8H4CzK9JCKtW9aTUpKurEpyHfcKqB07GMLC/+Q
-QiA3bFmrSaTRiE8EGBECAA8FAkLKSCgCGwwFCQPCZwAACgkQB3kNrVP9pwsejwCg
-gaQm6lU/H7ja0EUaJJFZnRoqRvAAnRK8CC4PIr/ZYDjd+aeS3R31FjGr
-=D1wm
------END PGP PUBLIC KEY BLOCK-----
diff --git a/branches/0.6/templates/vserver/vserver.s/devices.tar.gz b/branches/0.6/templates/vserver/vserver.s/devices.tar.gz
deleted file mode 100644
index dc4aea6..0000000
--- a/branches/0.6/templates/vserver/vserver.s/devices.tar.gz
+++ /dev/null
Binary files differ
diff --git a/branches/0.6/templates/vserver/vserver.s/vserver.sh b/branches/0.6/templates/vserver/vserver.s/vserver.sh
deleted file mode 100644
index e9d68a9..0000000
--- a/branches/0.6/templates/vserver/vserver.s/vserver.sh
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/bash
-#
-# vserver template script
-#
-
-BASE="/etc/simplepkg/templates/vserver/vserver.s"
-DEVICES="$BASE/devices.tar.gz"
-GPGKEY="$BASE/GPG-KEY"
-
-if [ -z "$2" ]; then
- echo "usage: `basename $0` <jail-root> <jail-name>"
- exit 1
-elif [ ! -d "$1/$2" ]; then
- echo "folder $1/$2 does not exist"
- exit 1
-fi
-
-echo "creating /etc/vservers/$2..."
-mv $1/$2 $1/$2.old
-vserver $2 build -m skeleton --force &> /dev/null
-result="$?"
-rm -rf $1/$2 && mv $1/$2.old $1/$2
-
-if [ "$result" != "0" ]; then
- mkdir -p /etc/vservers/$2/apps/init
-fi
-
-echo sysv > /etc/vservers/$2/apps/init/style
-echo 3 > /etc/vservers/$2/apps/init/runlevel.start
-echo 6 > /etc/vservers/$2/apps/init/runlevel.stop
-
-cp /etc/resolv.conf $1/$2/etc/
-cp /etc/localtime $1/$2/etc/
-echo /dev/hdv1 / ext2 defaults 1 1 > $1/$2/etc/fstab
-echo /dev/hdv1 / ext2 rw 0 0 > $1/$2/etc/mtab
-
-echo "creating devices and dependencies..."
-if [ -f "$DEVICES" ]; then
- cd $1/$2/
- tar zxvf $DEVICES
- chroot $1/$2/ sbin/ldconfig
-else
- echo error: device template $DEVICES not found
-fi
-
-if [ -f "$GPGKEY" ]; then
- echo "importing slack gpg pubkey"
- mkdir $1/$2/root/.gnupg
- gpg --homedir $1/$2/root/.gnupg --import $GPGKEY
-fi
-
-# todo: add rebootmgr
-echo "done; now config your vserver at /etc/vservers/$2"
-echo "then, set all desired iptables rules and other stuff and then start $server vserver"
-echo "dont forget to change root's password with the command "vserver $2 exec passwd""
diff --git a/branches/0.6/templates/vserver/vserver.template b/branches/0.6/templates/vserver/vserver.template
deleted file mode 100644
index 0cd1f69..0000000
--- a/branches/0.6/templates/vserver/vserver.template
+++ /dev/null
@@ -1,250 +0,0 @@
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: A1 (Base Linux series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-#
-#
-aaa_base: ADD
-aaa_elflibs: ADD
-bash: ADD
-bin: ADD
-bzip2: ADD
-coreutils: ADD
-cxxlibs: ADD
-dcron: ADD
-elvis: ADD
-etc: ADD
-findutils: ADD
-gawk: ADD
-gettext: REC
-grep: ADD
-gzip: ADD
-infozip: ADD
-less: ADD
-logrotate: ADD
-openssl-solibs: ADD
-pkgtools: ADD
-procps: ADD
-sed: ADD
-shadow: ADD
-slocate: ADD
-sysklogd: ADD
-sysvinit: ADD
-tar: ADD
-util-linux: ADD
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: AP1 (Applications series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-#
-#
-bc: OPT
-diffutils: REC
-jed: OPT
-joe: OPT
-jove: OPT
-lsof: OPT
-mysql: OPT
-sudo: OPT
-glibc: REC
-# Tagfile for emacs series
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: F1 (Frequently Asked Questions)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-#
-#
-libidn: REC
-libxml2: REC
-mhash: REC
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from the N (Network/UUCP/Mail/News) series.
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-#
-apache: OPT
-curl: OPT
-gnupg: OPT
-inetd: REC
-lftp: OPT
-lynx: OPT
-mod_ssl: OPT
-mailx: REC
-openssh: REC
-openssl: REC
-php: OPT
-rsync: OPT
-stunnel: OPT
-tcpip: REC
-wget: OPT
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: TCL1 (Tcl/Tk series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-#
-#
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: Y1 (Yaaaaaahhoooo? Games and Amusements).
-#
-# It is used to automate software installation.
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>:
-# will be extracted. Then, the last line in the extracted segment will be
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed.
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-# extra
-# libsafe
-# contrib
-simplepkg
-ssmtp
diff --git a/branches/0.6/utils/add-gpl b/branches/0.6/utils/add-gpl
deleted file mode 100755
index 0a261e2..0000000
--- a/branches/0.6/utils/add-gpl
+++ /dev/null
@@ -1,33 +0,0 @@
-#!/bin/bash
-#
-# add-gpl is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# add-gpl is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-# This script should be used to add a license in scripts.
-#
-
-script="SlackBuild"
-#script="build"
-
-for file in `find -name "*.$script"`; do
-
- echo Changing $file...
- package="`basename $file .$script`"
- slackbuild="`basename $file`"
-
- string="\#\!\/bin\/bash\n\#\n# $slackbuild is free software; you can redistribute it and\/or modify it under the\n# terms of the GNU General Public License as published by the Free Software\n# Foundation; either version 2 of the License, or any later version.\n#\n# $slackbuild is distributed in the hope that it will be useful, but WITHOUT ANY\n# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR\n# A PARTICULAR PURPOSE. See the GNU General Public License for more details.\n#\n# You should have received a copy of the GNU General Public License along with\n# this program; if not, write to the Free Software Foundation, Inc., 59 Temple\n# Place - Suite 330, Boston, MA 02111-1307, USA"
-
- sed -e "s/\#\!\/bin\/bash/$string/" $file > $file.new
- cat $file.new > $file
- rm $file.new
-
-done
diff --git a/branches/0.6/utils/add-slack-required b/branches/0.6/utils/add-slack-required
deleted file mode 100755
index 67804d0..0000000
--- a/branches/0.6/utils/add-slack-required
+++ /dev/null
@@ -1,63 +0,0 @@
-#!/bin/bash
-#
-# add-slack-required is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by the
-# Free Software Foundation; either version 2 of the License, or any later version.
-#
-# add-slack-required is distributed in the hope that it will be useful, but WITHOUT
-# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-# add slack-required files in an existing repository
-# by rhatto at riseup.net
-#
-
-COMMON="/usr/libexec/simplepkg/common.sh"
-BASENAME="`basename $0`"
-
-if [ -z "$2" ]; then
- echo "usage: $BASENAME /path/to/slackbuilds /path/to/packages"
- exit 1
-elif [ ! -d "$1" ]; then
- echo "$BASENAME: folder not found: $1"
- exit 1
-elif [ ! -d "$2" ]; then
- echo "$BASENAME: folder not found: $2"
- exit 1
-fi
-
-slackbuild="$1"
-repository="$2"
-
-# we need the function package_name
-if [ -f "$COMMON" ]; then
- source $COMMON
-else
- echo "error: file $COMMON found, check your $BASENAME installation"
- exit 1
-fi
-
-function search_and_copy_slackbuild {
-
- if [ -f "$1" ]; then
- echo Copying `basename $1` to `dirname $package`/$pack.slack-required
- cp $1 `dirname $package`/$pack.slack-required
- svn add `dirname $package`/$pack.slack-required 2> /dev/null
- fi
-
-}
-
-for package in `find $repository/ -name *tgz`; do
- pack="`package_name $package`"
- for build_script in `find $slackbuild/ -name $pack.SlackBuild`; do
-
- search_and_copy_slackbuild `dirname $build_script`/slack-required
- search_and_copy_slackbuild `dirname $build_script`/$pack.slack-required
-
- done
-done
-
diff --git a/branches/0.6/utils/convert-template-scheme b/branches/0.6/utils/convert-template-scheme
deleted file mode 100755
index de7e507..0000000
--- a/branches/0.6/utils/convert-template-scheme
+++ /dev/null
@@ -1,35 +0,0 @@
-#!/bin/bash
-#
-# This software is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# This software is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-# script for converting simplepkg templates
-# to the 0.5 own-folder format
-#
-
-cwd="/etc/simplepkg"
-cd $cwd
-
-for file in `ls *.template`; do
- cd $cwd
- template="`echo $file | cut -d . -f 1`"
- mkdir templates/$template
- mv $template.d templates/$template/
- mv $template.s templates/$templates/
- mv $template.template templates/$template/
- cd templates/$template/$template.s
- # optional step
- # if [ "$template" != "vserver" ]; then
- # ln -sf ../../../defaults/templatesvserver/vserver.s/vserver.sh
- # fi
-done
-
diff --git a/branches/0.6/utils/exec-slackbuild b/branches/0.6/utils/exec-slackbuild
deleted file mode 100755
index 0d92f28..0000000
--- a/branches/0.6/utils/exec-slackbuild
+++ /dev/null
@@ -1,88 +0,0 @@
-#!/bin/bash -x
-#
-# Script to execute SlackBuild and pass parameters
-#
-# by Rudson R. Alves
-#
-# Version 0.0.1
-PROG_VERSION=0.0.1
-LANG=en_US
-BACK_TITLE="Exec SlackBuild $PROG_VERSION [$1]"
-
-if [ $# -ne 2 ]; then
- echo "Use: exec-slackbuild <SlackBuild_script> <output_file>"
- exit 0
-fi
-
-SLACKBUILD=$1
-AUX_TMP=$2
-
-# Load slackbuildrc
-if [ -f ~/.slackbuildrc ]; then
- source ~/.slackbuildrc
-elif [ -f /etc/slackbuildrc ]; then
- source /etc/slackbuildrc
-fi
-
-# set do default null variables
-[ -z $SRC_DIR ] && SRC_DIR="default"
-[ -z $REPOS ] && REPOS="default"
-[ -z $TMP ] && TMP="default"
-[ -z $ARCH ] && ARCH="default"
-[ -z $CLEANUP ] && CLEANUP="default"
-[ -z $NUMJOBS ] && NUMJOBS="default"
-[ -z $BUILD ] && BUILD="default"
-[ -z $CONF_OPTIONS ] && CONF_OPTIONS="default"
-
-# Edit variables
-ANS=`dialog --separate-widget "rudson" --stdout --backtitle "$BACK_TITLE" \
- --title "Set variables" --form "Use down key to more variables; default = null argument; use \" to set several arguments." \
- 19 52 11 \
- "SRC_DIR:" 1 1 "$SRC_DIR" 1 15 30 60 \
- "REPOS:" 3 1 "$REPOS" 3 15 30 60 \
- "TMP:" 5 1 "$TMP" 5 15 30 60 \
- "ARCH:" 7 1 "$ARCH" 7 15 30 60 \
- "CLEANUP:" 9 1 "$CLEANUP" 9 15 30 60 \
- "NUMJOBS:" 11 1 "$NUMJOBS" 11 15 30 60 \
- "BUILD:" 13 1 "$BUILD" 13 15 30 60 \
- "CONF_OPTIONS:" 15 1 "$CONF_OPTIONS" 15 15 30 60`
-[ $? -ne 0 ] && exit 11
-
-# Remove "s
- SRC_DIR=`echo $ANS | awk '{print $1}' | tr -d \"`
- REPOS=`echo $ANS | awk '{print $2}' | tr -d \"`
- TMP=`echo $ANS | awk '{print $3}' | tr -d \"`
- ARCH=`echo $ANS | awk '{print $4}' | tr -d \"`
- CLEANUP=`echo $ANS | awk '{print $5}' | tr -d \"`
- NUMJOBS=`echo $ANS | awk '{print $6}' | tr -d \"`
- BUILD=`echo $ANS | awk '{print $7}' | tr -d \"`
-CONF_OPTIONS=`echo $ANS | awk '{print $8}' | tr -d \"`
-
-# Set to null ("") variables with default value
- [ "$SRC_DIR" = "default" ] && SRC_DIR=""
- [ "$REPOS" = "default" ] && REPOS=""
- [ "$TMP" = "default" ] && TMP=""
- [ "$ARCH" = "default" ] && ARCH=""
- [ "$CLEANUP" = "default" ] && CLEANUP=""
- [ "$NUMJOBS" = "default" ] && NUMJOBS=""
- [ "$BUILD" = "default" ] && BUILD=""
-[ "$CONF_OPTIONS" = "default" ] && CONF_OPTIONS=""
-
-# Select debug level
-DEBUG=`dialog --stdout --backtitle "$BACK_TITLE" \
- --cancel-label "no debug" --title "$MK_TITLE" \
- --menu "Select debug level" 10 35 3 \
- "-x" "Simple debug" \
- "-xv" "More information" \
- "none" "No debug"`
-
-[ $? -ne 0 -o "$DEBUG" = "none" ] && DEBUG=""
-
-# Check sintax from SlackBuild
-sh -n $SLACKBUILD || exit 11
-
-# Execute SlackBuild in background
-SRC_DIR="$SRC_DIR" REPOS="$REPOS" TMP="$TMP" ARCH="$ARCH" CLEANUP="$CLEANUP" NUMJOBS="$NUMJOBS" BUILD="$BUILD" CONF_OPTIONS="$CONF_OPTIONS" sh $DEBUG $SLACKBUILD > $AUX_TMP 2>&1 & PID=$!
-
-# Return pid from process
-echo $PID
diff --git a/branches/0.6/utils/merge-template b/branches/0.6/utils/merge-template
deleted file mode 100755
index 3df5f7a..0000000
--- a/branches/0.6/utils/merge-template
+++ /dev/null
@@ -1,37 +0,0 @@
-#!/bin/bash
-#
-# This software is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# This software is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-# tip: to assemble a template from all slack tagfiles:
-#
-# for diskset in a ap d e f k l n t tcl x xap y; do
-# lynx -dump http://slack.sarava.org/slackware/slackware-10.2/slackware/$diskset/tagfile >> slack.template
-# done
-#
-
-if [ -z "$2" ]; then
- echo "usage: `basename $0` <template> <base-template>"
- exit 1
-elif [ ! -f "$1" ] || [ ! -f "$2" ]; then
- echo error: $1 ou $2 not found
- exit 1
-fi
-
-cp $2 $1.new
-
-cat $1 | while read line; do
- pack="`echo $line | cut -d : -f 1`"
- if ! grep -qe "^$pack:" $2; then
- echo $line >> $1.new
- fi
-done
diff --git a/branches/0.6/utils/metapkg b/branches/0.6/utils/metapkg
deleted file mode 100755
index e3db602..0000000
--- a/branches/0.6/utils/metapkg
+++ /dev/null
@@ -1,72 +0,0 @@
-#!/bin/bash
-#
-# metapkg v0.1: install or remove a pkgtool metapackage
-#
-# feedback: rhatto at riseup.net | GPL
-#
-# Metapkg is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# Metapkg is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-# A metapackage is a file containing a list of packages.
-# This script just installs all the packages in a metapackage.
-# Remeber that mkjail template == metapkg metapackage.
-#
-
-#
-# TODO
-#
-# In the mean term, metapkg will not be developed, but the code will rest
-# until someone need it. Some ideas to think for the future of metapkg would
-# be a better integration with simplepkg structure, like:
-#
-# - By default metapkg searches by a slack-required in the package/slackbuilds repos
-# - With -f, metapkg uses a local file (template, slack-required or tagfile)
-#
-
-COMMON="/usr/libexec/simplepkg/common.sh"
-BASENAME="`basename $0`"
-ROOT="/"
-
-function usage {
- echo "usage: [ROOT=/otherroot] $BASENAME --option [metapackage]"
- echo "options: --install, --remove"
- exit 1
-}
-
-if [ -f "$COMMON" ]; then
- source $COMMON
-else
- echo "error: file $COMMON found, check your `basename $0` installation"
- exit 1
-fi
-
-if [ -z "$2" ]; then
- usage
-else
- eval_config $BASENAME -u
-fi
-
-if [ ! -f "$BASE_CONF/$2.template" ]; then
- echo error: template $2 not found
- exit 1
-else
- TEMPLATE="$BASE_CONF/$2.template"
- unset server
-fi
-
-if [ "$1" == "--install" ] || [ "$1" == "install" ]; then
- install_packages
-elif [ "$1" == "--remove" ] || [ "$1" == "remove" ]; then
- remove_packages
-else
- usage
-fi
diff --git a/branches/0.6/utils/searchpkg b/branches/0.6/utils/searchpkg
deleted file mode 100755
index cc5a827..0000000
--- a/branches/0.6/utils/searchpkg
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/bash
-#
-# This software is free software; you can redistribute it and/or modify it under the
-# terms of the GNU General Public License as published by the Free Software
-# Foundation; either version 2 of the License, or any later version.
-#
-# This software is distributed in the hope that it will be useful, but WITHOUT ANY
-# WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
-# A PARTICULAR PURPOSE. See the GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along with
-# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
-# Place - Suite 330, Boston, MA 02111-1307, USA
-#
-# searchpkg: search packages inside a local slackware-like repository
-# this is part of simplepkg
-# feedback: rhatto at riseup.net | gpl
-#
-
-# find . -type f -exec ls -l {} \; > FILELIST.TXT
-
-if [[ $# != 1 && $# != 2 ]]; then
- echo "usage: $0 [-1] <repository> [package-name]"
- echo "package-name can be either the full package file name, just its prefix or so"
- echo "option -1 show just the first matching package"
- exit 1
-fi
-
-FILELIST="$1/FILELIST.TXT"
-PACKAGE_FIELD="8"
-
-if [ -z "$2" ]; then
- grep .tgz $FILELIST
-else
- grep -e "$2" $FILELIST | grep tgz | awk "{ print \$$PACKAGE_FIELD }"
-fi