1 files changed, 0 insertions, 64 deletions
diff --git a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward b/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward
deleted file mode 100644
index 52bd2fe..0000000
--- a/branches/0.6/templates/vserver/vserver.d/etc/rc.d/rc.ip_forward
+++ /dev/null
@@ -1,64 +0,0 @@
-#!/bin/sh
-# /etc/rc.d/rc.ip_forward:  start/stop IP packet forwarding
-#
-# If you intend to run your Linux box as a router, i.e. as a
-# computer that forwards and redistributes network packets, you
-# will need to enable IP packet forwarding in your kernel.
-#
-# To activate IP packet forwarding at boot time, make this
-# script executable:  chmod 755 /etc/rc.d/rc.ip_forward
-#
-# To disable IP packet forwarding at boot time, make this
-# script non-executable:  chmod 644 /etc/rc.d/rc.ip_forward
-
-# Start IP packet forwarding:
-ip_forward_start() {
-  if [ -f /proc/sys/net/ipv4/ip_forward ]; then
-    echo "Activating IPv4 packet forwarding."
-    echo 1 > /proc/sys/net/ipv4/ip_forward
-  fi
-  # When using IPv4 packet forwarding, you will also get the
-  # rp_filter, which automatically rejects incoming packets if the
-  # routing table entry for their source address doesn't match the
-  # network interface they're arriving on.  This has security
-  # advantages because it prevents the so-called IP spoofing,
-  # however it can pose problems if you use asymmetric routing
-  # (packets from you to a host take a different path than packets
-  # from that host to you) or if you operate a non-routing host
-  # which has several IP addresses on different interfaces.  To
-  # turn rp_filter off, uncomment the lines below:
-  #if [ -r /proc/sys/net/ipv4/conf/all/rp_filter ]; then
-  #  echo "Disabling rp_filter."
-  #  echo 0 > /proc/sys/net/ipv4/conf/all/rp_filter
-  #fi
-}
-
-# Stop IP packet forwarding:
-ip_forward_stop() {
-  if [ -f /proc/sys/net/ipv4/ip_forward ]; then
-    echo "Disabling IPv4 packet forwarding."
-    echo 0 > /proc/sys/net/ipv4/ip_forward
-  fi
-}
-
-# Restart IP packet forwarding:
-ip_forward_restart() {
-  ip_forward_stop
-  sleep 1
-  ip_forward_start
-}
-
-case "$1" in
-'start')
-  ip_forward_start
-  ;;
-'stop')
-  ip_forward_stop
-  ;;
-'restart')
-  ip_forward_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
-