changed repository layout to trunk/, tags/ and branches/ scheme

git-svn-id: svn+slack://slack.fluxo.info/var/svn/simplepkg@181 04377dda-e619-0410-9926-eae83683ac58

1 files changed, 0 insertions, 294 deletions

diff --git a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.S b/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.S
deleted file mode 100755
index 05c75b4..0000000
--- a/templates/vserver-legacy/vserver-legacy.d/etc/rc.d/rc.S
+++ /dev/null
@@ -1,294 +0,0 @@
-#!/bin/sh
-#
-# /etc/rc.d/rc.S:  System initialization script.
-#
-# Mostly written by:  Patrick J. Volkerding, <volkerdi@slackware.com>
-#
-
-PATH=/sbin:/usr/sbin:/bin:/usr/bin
-
-# Mount /proc right away:
-/sbin/mount -v proc /proc -n -t proc
-
-# If 'nohotplug' was given at boot, or rc.hotplug has been turned off
-# (is not executable), then shut off hotplugging in the kernel now.
-# Turning off hotplug is *not* recommended, and will break some things.
-if [ -w /proc/sys/kernel/hotplug ]; then
-  if grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
-    echo "/dev/null" > /proc/sys/kernel/hotplug
-  elif [ ! -x /etc/rc.d/rc.hotplug ]; then
-    echo "/dev/null" > /proc/sys/kernel/hotplug
-  fi
-fi
-
-# Start devfsd if necessary.  On newer kernels, udev should be used instead.
-if [ -x /etc/rc.d/rc.devfsd ]; then
-  /etc/rc.d/rc.devfsd start
-fi
-
-# Mount sysfs next, if the kernel supports it:
-if [ -d /sys ]; then
-  if cat /proc/filesystems | grep -w sysfs 1> /dev/null 2> /dev/null ; then
-    if ! cat /proc/mounts | grep -w sysfs 1> /dev/null 2> /dev/null ; then
-      /sbin/mount -v sysfs /sys -n -t sysfs
-    fi
-  fi
-fi
-
-# Initialize udev to manage /dev entries for 2.6.x kernels:
-if [ -x /etc/rc.d/rc.udev ]; then
-  if ! grep -w nohotplug /proc/cmdline 1> /dev/null 2> /dev/null ; then
-    /etc/rc.d/rc.udev
-  fi
-fi
-
-# Enable swapping:
-/sbin/swapon -a
-
-# Test to see if the root partition is read-only, like it ought to be.
-READWRITE=no
-if touch /fsrwtestfile 2>/dev/null; then
-  rm -f /fsrwtestfile
-  READWRITE=yes
-else
-  echo "Testing root filesystem status:  read-only filesystem"
-fi
-
-# See if a forced filesystem check was requested at shutdown:
-if [ -r /etc/forcefsck ]; then
-  FORCEFSCK="-f"
-fi
-
-# Check the root filesystem:
-if [ ! $READWRITE = yes ]; then
-  RETVAL=0
-  if [ ! -r /etc/fastboot ]; then
-    echo "Checking root filesystem:"
-    /sbin/fsck $FORCEFSCK -C -a /
-    RETVAL=$?
-  fi
-  # An error code of 2 or higher will require a reboot.
-  if [ $RETVAL -ge 2 ]; then
-    # An error code equal to or greater than 4 means that some errors
-    # could not be corrected.  This requires manual attention, so we
-    # offer a chance to try to fix the problem in single-user mode:
-    if [ $RETVAL -ge 4 ]; then
-      echo
-      echo "***********************************************************"
-      echo "*** An error occurred during the root filesystem check. ***"
-      echo "*** You will now be given a chance to log into the      ***"
-      echo "*** system in single-user mode to fix the problem.      ***"
-      echo "***                                                     ***"
-      echo "*** If you are using the ext2 filesystem, running       ***"
-      echo "*** 'e2fsck -v -y <partition>' might help.              ***"
-      echo "***********************************************************"
-      echo
-      echo "Once you exit the single-user shell, the system will reboot."
-      echo
-      PS1="(Repair filesystem) \#"; export PS1
-      sulogin
-    else # With an error code of 2 or 3, reboot the machine automatically:
-      echo
-      echo "***********************************"
-      echo "*** The filesystem was changed. ***"
-      echo "*** The system will now reboot. ***"
-      echo "***********************************"
-      echo
-    fi
-    echo "Unmounting file systems."
-    /sbin/umount -a -r
-    /sbin/mount -n -o remount,ro /
-    echo "Rebooting system."
-    sleep 2
-    reboot -f
-  fi
-  # Remount the root filesystem in read-write mode
-  echo "Remounting root device with read-write enabled."
-  /sbin/mount -w -v -n -o remount /
-  if [ $? -gt 0 ] ; then
-    echo
-    echo "Attempt to remount root device as read-write failed!  This is going to"
-    echo "cause serious problems."
-    echo 
-    echo "If you're using the UMSDOS filesystem, you **MUST** mount the root partition"
-    echo "read-write!  You can make sure the root filesystem is getting mounted "
-    echo "read-write with the 'rw' flag to Loadlin:"
-    echo
-    echo "loadlin vmlinuz root=/dev/hda1 rw   (replace /dev/hda1 with your root device)"
-    echo
-    echo "Normal bootdisks can be made to mount a system read-write with the rdev command:"
-    echo
-    echo "rdev -R /dev/fd0 0"
-    echo
-    echo "You can also get into your system by using a boot disk with a command like this"
-    echo "on the LILO prompt line:  (change the root partition name as needed)"
-    echo 
-    echo "LILO: mount root=/dev/hda1 rw"
-    echo
-    echo "Please press ENTER to continue, then reboot and use one of the above methods to"
-    echo -n "get into your machine and start looking for the problem. " 
-    read junk; 
-  fi
-else
-  echo "Testing root filesystem status:  read-write filesystem"
-  if cat /etc/fstab | grep ' / ' | grep umsdos 1> /dev/null 2> /dev/null ; then
-    ROOTTYPE="umsdos"
-  fi
-  if [ ! "$ROOTTYPE" = "umsdos" ]; then # no warn for UMSDOS
-    echo
-    echo "*** ERROR: Root partition has already been mounted read-write. Cannot check!"
-    echo
-    echo "For filesystem checking to work properly, your system must initially mount"
-    echo "the root partition as read only. Please modify your kernel with 'rdev' so that"
-    echo "it does this. If you're booting with LILO, add a line:"
-    echo
-    echo "   read-only"
-    echo
-    echo "to the Linux section in your /etc/lilo.conf and type 'lilo' to reinstall it."
-    echo
-    echo "If you boot from a kernel on a floppy disk, put it in the drive and type:"
-    echo "   rdev -R /dev/fd0 1"
-    echo
-    echo "If you boot from a bootdisk, or with Loadlin, you can add the 'ro' flag."
-    echo
-    echo "This will fix the problem *AND* eliminate this annoying message. :^)"
-    echo
-    echo -n "Press ENTER to continue. "
-    read junk;
-  fi
-fi # Done checking root filesystem
-
-# Any /etc/mtab that exists here is old, so we delete it to start over:
-/bin/rm -f /etc/mtab*
-# Remounting the / partition will initialize the new /etc/mtab:
-/sbin/mount -w -o remount /
-
-# Fix /etc/mtab to list sys and proc if they were not yet entered in
-# /etc/mtab because / was still mounted read-only:
-if [ -d /proc/sys ]; then
-  /sbin/mount -f proc /proc -t proc
-fi
-if [ -d /sys/bus ]; then
-  /sbin/mount -f sysfs /sys -t sysfs
-fi
-
-# Set the system time from the hardware clock using hwclock --hctosys.
-if [ -x /sbin/hwclock ]; then
-  if grep "^UTC" /etc/hardwareclock 1> /dev/null 2> /dev/null ; then
-    echo "Setting system time from the hardware clock (UTC)."
-    /sbin/hwclock --utc --hctosys
-  else
-    echo "Setting system time from the hardware clock (localtime)."
-    /sbin/hwclock --localtime --hctosys
-  fi
-fi
-
-# Configure ISA Plug-and-Play devices:
-if [ -r /etc/isapnp.conf ]; then
-  if [ -x /sbin/isapnp ]; then
-    /sbin/isapnp /etc/isapnp.conf
-  fi
-fi
-
-# This loads any kernel modules that are needed.  These might be required to
-# use your ethernet card, sound card, or other optional hardware.
-if [ -x /etc/rc.d/rc.modules -a -r /proc/modules ]; then
-  . /etc/rc.d/rc.modules
-fi
-
-# Configure runtime kernel parameters:
-if [ -x /sbin/sysctl -a -r /etc/sysctl.conf ]; then
-  /sbin/sysctl -e -p /etc/sysctl.conf
-fi
-
-# Initialize the Logical Volume Manager.
-# This won't start unless we find /etc/lvmtab (LVM1) or 
-# /etc/lvm/backup/ (LVM2).  This is created by /sbin/vgscan, so to
-# use LVM you must run /sbin/vgscan yourself the first time (and
-# create some VGs and LVs).
-if [ -r /etc/lvmtab -o -d /etc/lvm/backup ]; then
-  echo "Initializing LVM (Logical Volume Manager):"
-  # Check for device-mapper support.
-  if ! cat /proc/devices | grep -w device-mapper 1> /dev/null 2> /dev/null ; then
-    # If device-mapper exists as a module, try to load it.
-    if [ -r /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko ]; then
-      insmod /lib/modules/$(cat /proc/sys/kernel/osrelease)/kernel/drivers/md/dm-mod.ko
-    fi
-  fi
-  # Scan for new volume groups:
-  /sbin/vgscan 2> /dev/null
-  if [ $? = 0 ]; then
-    # This needs a moment to register.
-    sleep 10
-    # Make volume groups available to the kernel.
-    # This should also make logical volumes available.
-    /sbin/vgchange -ay
-    # Enable swapping again in case any LVs are used for swap.  Ignore previous error.  :-)
-    /sbin/swapon -a
-  fi
-fi
-
-# Check all the non-root filesystems:
-if [ ! -r /etc/fastboot ]; then
-  echo "Checking non-root filesystems:"
-  /sbin/fsck $FORCEFSCK -C -R -A -a
-fi
-
-# mount non-root file systems in fstab (but not NFS or SMB 
-# because TCP/IP is not yet configured, and not proc because
-# that has already been mounted):
-/sbin/mount -a -v -t nonfs,nosmbfs,noproc
-
-# Clean up some temporary files:
-( cd /var/log/setup/tmp && rm -rf * )
-/bin/rm -f /var/run/utmp /var/run/*pid /etc/nologin /var/run/lpd* \
-  /var/run/ppp* /etc/dhcpc/*.pid /etc/forcefsck /etc/fastboot
-
-# Attempt to umount and remove any leftover /initrd:
-if [ -d /initrd ]; then
-  /sbin/umount /initrd 2> /dev/null
-  rmdir /initrd 2> /dev/null
-  blockdev --flushbufs /dev/ram0 2> /dev/null
-fi
-
-# Create a fresh utmp file:
-touch /var/run/utmp
-chown root.utmp /var/run/utmp
-chmod 664 /var/run/utmp
-
-if [ "$ROOTTYPE" = "umsdos" ]; then # we need to update any files added in DOS:
-  echo "Synchronizing UMSDOS directory structure:"
-  echo "  /sbin/umssync -r99 -v- /"
-  /sbin/umssync -r99 -v- /
-fi
-
-# Setup the /etc/motd to reflect the current kernel level:
-# THIS WIPES ANY CHANGES YOU MAKE TO /ETC/MOTD WITH EACH BOOT.
-# COMMENT THIS OUT IF YOU WANT TO MAKE A CUSTOM VERSION.
-echo "$(/bin/uname -sr)." > /etc/motd
-
-# If there are SystemV init scripts for this runlevel, run them.
-if [ -x /etc/rc.d/rc.sysvinit ]; then
-  . /etc/rc.d/rc.sysvinit
-fi
-
-# Run serial port setup script:
-# (CAREFUL! This can make some systems hang if the rc.serial script isn't
-# set up correctly. If this happens, you may have to edit the file from a
-# boot disk)
-#
-# . /etc/rc.d/rc.serial
-
-# Carry an entropy pool between reboots to improve randomness.
-if [ -f /etc/random-seed ]; then
-  echo "Using /etc/random-seed to initialize /dev/urandom."
-  cat /etc/random-seed > /dev/urandom
-fi
-# Use the pool size from /proc, or 512 bytes:
-if [ -r /proc/sys/kernel/random/poolsize ]; then
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=$(cat /proc/sys/kernel/random/poolsize) 2> /dev/null
-else
-  dd if=/dev/urandom of=/etc/random-seed count=1 bs=512 2> /dev/null
-fi
-chmod 600 /etc/random-seed
-