diff options
author | Silvio Rhatto <rhatto@riseup.net> | 2013-06-07 21:42:08 -0300 |
---|---|---|
committer | Silvio Rhatto <rhatto@riseup.net> | 2013-06-07 21:42:08 -0300 |
commit | 599527b27a9223ba9c0170fb3d12a7339316a171 (patch) | |
tree | e2e4427f73465a7b6f3581d19c9aa844786b3647 /templates | |
parent | e7db0ea316fb9bf2c7ae5792a447697a561d839d (diff) | |
download | puppet-onion-599527b27a9223ba9c0170fb3d12a7339316a171.tar.gz puppet-onion-599527b27a9223ba9c0170fb3d12a7339316a171.tar.bz2 |
Adding onion::monitor
Diffstat (limited to 'templates')
-rw-r--r-- | templates/armrc.erb | 320 |
1 files changed, 320 insertions, 0 deletions
diff --git a/templates/armrc.erb b/templates/armrc.erb new file mode 100644 index 0000000..1bf80d1 --- /dev/null +++ b/templates/armrc.erb @@ -0,0 +1,320 @@ +# Startup options +startup.controlPassword <%= control_password %> +startup.interface.ipAddress 127.0.0.1 +startup.interface.port 9051 +startup.interface.socket /var/run/tor/control +startup.blindModeEnabled false +startup.events N3 +startup.dataDirectory ~/.arm + +# Seconds between querying information +queries.resourceUsage.rate 5 +queries.connections.minRate 5 +queries.refreshRate.rate 5 + +# allows individual panels to be included/excluded +features.panels.show.graph true +features.panels.show.log true +features.panels.show.connection true +features.panels.show.config true +features.panels.show.torrc true +features.panels.show.interpretor true + +# Read the proc contents directly instead of calling ps, netstat, and other +# resolvers. This provides very sizable performance benefits (around 90% +# faster lookups) but this is only available on Linux. +queries.useProc true + +# Renders the interface with color if set and the terminal supports it +features.colorInterface true + +# Replaces all colored content (ie, anything that isn't white) with this +# color. Valid options are: +# none, red, green, yellow, blue, cyan, magenta, black, white +features.colorOverride none + +# If arm is attached to an arm started tor instance when it shuts down then +# offers to shut down tor too if true, otherwise skips this prompt. +features.offerTorShutdownOnQuit false + +# Includes unicode characters in the interface. +features.printUnicode true + +# Checks the torrc for issues, warning and hilighting problems if true +features.torrc.validate true + +# Set this if you're running in a chroot jail or other environment where tor's +# resources (log, state, etc) should have a prefix in their paths. +features.pathPrefix + +# If set, arm appends any log messages it reports while running to the given +# log file. This does not take filters into account or include prepopulated +# events. +features.logFile + +# If true, the header panel always shows the file descriptor usage. Otherwise +# this is only displayed when we're running out. +features.showFdUsage false + +# Seconds to wait on user input before refreshing content +features.redrawRate 5 + +# Rate (seconds) to periodically redraw the screen, disabled if zero. This +# shouldn't be necessary, but can correct issues if the terminal gets into a +# funky state. +features.refreshRate 5 + +# Confirms promt to confirm when quiting if true +features.confirmQuit true + +# Allows arm to start when there's no running tor instance if true, otherwise +# we terminate right away. This is ignored if the user provides an option +# specifying how to connect to tor (ie, a 'startup.interface.*' option or +# startup argument). +features.allowDetachedStartup true + +# Paremters for the log panel +# --------------------------- +# showDateDividers +# show borders with dates for entries from previous days +# showDuplicateEntries +# shows all log entries if true, otherwise collapses similar entries with an +# indicator for how much is being hidden +# entryDuration +# number of days log entries are kept before being dropped (if zero then +# they're kept until cropped due to caching limits) +# maxLinesPerEntry +# max number of lines to display for a single log entry +# prepopulate +# attempts to read past events from the log file if true +# prepopulateReadLimit +# maximum entries read from the log file, used to prevent huge log files from +# causing a slow startup time. +# maxRefreshRate +# rate limiting (in milliseconds) for drawing the log if updates are made +# rapidly (for instance, when at the DEBUG runlevel) +# regex +# preconfigured regular expression pattern, up to five will be loaded + +features.log.showDateDividers true +features.log.showDuplicateEntries false +features.log.entryDuration 7 +features.log.maxLinesPerEntry 6 +features.log.prepopulate true +features.log.prepopulateReadLimit 5000 +features.log.maxRefreshRate 300 +#features.log.regex My First Regex Pattern +#features.log.regex ^My Second Regex Pattern$ + +# Paremters for the config panel +# --------------------------- +# order +# three comma separated configuration attributes, options including: +# 0 -> Category, 1 -> Option Name, 2 -> Value, 3 -> Arg Type, +# 4 -> Arg Usage, 5 -> Summary, 6 -> Description, 7 -> Man Entry, +# 8 -> Is Default +# selectionDetails.height +# rows of data for the panel showing details on the current selection, this +# is disabled entirely if zero +# features.config.prepopulateEditValues +# when editing config values the current value is prepopulated if true, and +# left blank otherwise +# state.colWidth.* +# column content width +# state.showPrivateOptions +# tor provides config options of the form "__<option>" that can be dangerous +# to set, if true arm provides these on the config panel +# state.showVirtualOptions +# virtual options are placeholders for other option groups, never having +# values or being setable themselves +# file.showScrollbars +# displays scrollbars when the torrc content is longer than the display +# file.maxLinesPerEntry +# max number of lines to display for a single entry in the torrc + +features.config.order 7, 1, 8 +features.config.selectionDetails.height 6 +features.config.prepopulateEditValues true +features.config.state.colWidth.option 25 +features.config.state.colWidth.value 15 +features.config.state.showPrivateOptions false +features.config.state.showVirtualOptions false +features.config.file.showScrollbars true +features.config.file.maxLinesPerEntry 8 + +# Descriptions for tor's configuration options can be loaded from its man page +# to give usage information on the settings page. They can also be persisted to +# a file to speed future lookups. +# --------------------------- +# enabled +# allows the descriptions to be fetched from the man page if true +# persist +# caches the descriptions (substantially saving on future startup times) + +features.config.descriptions.enabled true +features.config.descriptions.persist true + +# General graph parameters +# ------------------------ +# height +# height of graphed stats +# maxWidth +# maximum number of graphed entries +# interval +# 0 -> each second, 1 -> 5 seconds, 2 -> 30 seconds, 3 -> minutely, +# 4 -> 15 minutes, 5 -> half hour, 6 -> hourly, 7 -> daily +# bound +# 0 -> global maxima, 1 -> local maxima, 2 -> tight +# type +# 0 -> None, 1 -> Bandwidth, 2 -> Connections, 3 -> System Resources +# showIntermediateBounds +# shows y-axis increments between the top/bottom bounds + +features.graph.height 7 +features.graph.maxWidth 150 +features.graph.interval 0 +features.graph.bound 1 +features.graph.type 1 +features.graph.showIntermediateBounds true + +# Parameters for graphing bandwidth stats +# --------------------------------------- +# prepopulate +# attempts to use tor's state file to prepopulate the bandwidth graph at the +# 15-minute interval (this requires the minimum of a day's worth of uptime) +# transferInBystes +# shows rate measurments in bytes if true, bits otherwise +# accounting.show +# provides accounting stats if AccountingMax was set +# accounting.rate +# seconds between querying accounting stats +# accounting.isTimeLong +# provides verbose measurements of time if true + +features.graph.bw.prepopulate true +features.graph.bw.transferInBytes false +features.graph.bw.accounting.show true +features.graph.bw.accounting.rate 10 +features.graph.bw.accounting.isTimeLong false + +# Parameters for connection display +# --------------------------------- +# listingType +# the primary category of information shown by default, options including: +# 0 -> IP Address / Port 1 -> Hostname +# 2 -> Fingerprint 3 -> Nickname +# order +# three comma separated configuration attributes, options including: +# 0 -> Category, 1 -> Uptime, 2 -> Listing, 3 -> IP Address, +# 4 -> Port, 5 -> Hostname, 6 -> Fingerprint, 7 -> Nickname, +# 8 -> Country +# refreshRate +# rate at which the connection panel contents is redrawn (if higher than the +# connection resolution rate then reducing this won't casue new data to +# appear more frequently - just increase the rate at which the uptime field +# is updated) +# resolveApps +# issues lsof queries to determining the applications involved in local +# SOCKS and CONTROL connections +# markInitialConnections +# if true, the uptime of the initial connections when we start are marked +# with a '+' (these uptimes are estimates since arm can only track a +# connection's duration while it runs) +# showIps +# shows ip addresses for other tor relays, dropping this information if +# false +# showExitPort +# shows port related information of exit connections we relay if true +# showColumn.* +# toggles the visability of the connection table columns + +features.connection.listingType 0 +features.connection.order 0, 2, 1 +features.connection.refreshRate 5 +features.connection.resolveApps true +features.connection.markInitialConnections true +features.connection.showIps true +features.connection.showExitPort true +features.connection.showColumn.fingerprint true +features.connection.showColumn.nickname true +features.connection.showColumn.destination true +features.connection.showColumn.expandedIp true + +# Thread pool size for hostname resolutions +# Determines the maximum number of concurrent requests. Upping this to around +# thirty or so seems to be problematic, causing intermittently seizing. + +queries.hostnames.poolSize 5 + +# Method of resolving hostnames +# If true, uses python's internal "socket.gethostbyaddr" to resolve addresses +# rather than the host command. This is ignored if the system's unable to make +# parallel requests. Resolving this way seems to be much slower than host calls +# in practice. + +queries.hostnames.useSocketModule false + +# Caching parameters +cache.sysCalls.size 600 +cache.hostnames.size 700000 +cache.hostnames.trimSize 200000 +cache.logPanel.size 1000 +cache.armLog.size 1000 +cache.armLog.trimSize 200 + +# Runlevels at which arm logs its events +log.startTime INFO +log.configEntryNotFound NONE +log.configEntryUndefined NOTICE +log.configEntryTypeError NOTICE +log.torCtlPortClosed NOTICE +log.torGetInfo DEBUG +log.torGetInfoCache NONE +log.torGetConf DEBUG +log.torGetConfCache NONE +log.torSetConf INFO +log.torEventTypeUnrecognized NOTICE +log.torPrefixPathInvalid NOTICE +log.procCallMade DEBUG +log.sysCallMade DEBUG +log.sysCallCached NONE +log.sysCallFailed INFO +log.sysCallCacheGrowing INFO +log.panelRecreated DEBUG +log.graph.bw.prepopulateSuccess NOTICE +log.graph.bw.prepopulateFailure NOTICE +log.logPanel.prepopulateSuccess INFO +log.logPanel.prepopulateFailed WARN +log.logPanel.logFileOpened NOTICE +log.logPanel.logFileWriteFailed ERR +log.logPanel.forceDoubleRedraw DEBUG +log.torrc.readFailed WARN +log.torrc.validation.torStateDiffers WARN +log.torrc.validation.unnecessaryTorrcEntries NOTICE +log.configDescriptions.readManPageSuccess INFO +log.configDescriptions.readManPageFailed NOTICE +log.configDescriptions.unrecognizedCategory NOTICE +log.configDescriptions.internalLoadSuccess NOTICE +log.configDescriptions.internalLoadFailed ERR +log.configDescriptions.persistance.loadSuccess INFO +log.configDescriptions.persistance.loadFailed INFO +log.configDescriptions.persistance.saveSuccess NOTICE +log.configDescriptions.persistance.saveFailed NOTICE +log.connResolverOptions INFO +log.connLookupFailed INFO +log.connLookupFailover NOTICE +log.connLookupAbandon NOTICE +log.connLookupRateGrowing NONE +log.hostnameCacheTrimmed INFO +log.cursesColorSupport INFO +log.bsdJailFound INFO +log.unknownBsdJailId WARN +log.geoipUnavailable WARN +log.stats.failedProcResolution DEBUG +log.stats.procResolutionFailover INFO +log.stats.failedPsResolution INFO +log.savingDebugLog NOTICE +log.fdUsageSixtyPercent NOTICE +log.fdUsageNinetyPercent WARN +log.unknownTorPid WARN + |