aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--handlers/rsync.in1176
1 files changed, 952 insertions, 224 deletions
diff --git a/handlers/rsync.in b/handlers/rsync.in
index 072f2a6..829f148 100644
--- a/handlers/rsync.in
+++ b/handlers/rsync.in
@@ -1,13 +1,26 @@
-# -*- mode: sh; sh-basic-offset: 3; indent-tabs-mode: nil; -*-
-# vim: set filetype=sh sw=3 sts=3 expandtab autoindent:
#
-# backupninja handler to do incremental backups using
-# rsync and hardlinks, based on
+# backupninja handler for incremental backups using rsync and hardlinks
+# feedback: rhatto at riseup.net
#
-# http://www.mikerubel.org/computers/rsync_snapshots/
+# rsync handler is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the Free
+# Software Foundation; either version 2 of the License, or any later version.
#
-# feedback: rhatto at riseup.net | gpl
-# lot of enhancements grabbed from "rsnap" handler by paulv at bikkel.org
+# rsync handler is distributed in the hope that it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+#
+# You should have received a copy of the GNU General Public License along with
+# this program; if not, write to the Free Software Foundation, Inc., 59 Temple
+# Place - Suite 330, Boston, MA 02111-1307, USA
+#
+# Inspiration
+# -----------
+#
+# - http://www.mikerubel.org/computers/rsync_snapshots/
+# - rsnap handler by paulv at bikkel.org
+# - maildir handler from backupninja
#
# Config file options
# -------------------
@@ -17,21 +30,29 @@
# partition = partition where the backup lives
# fscheck = set to 1 if fsck should run on $partition after the backup is made
# read_only = set to 1 if $partition is mounted read-only
-# mountpoint = backup partition mountpoint or backup main folder
-# backupdir = folder relative do $mountpoint where the backup should be stored
-# days = number of backup increments (min = 5)
+# mountpoint = backup partition mountpoint or backup main folder (either local or remote)
+# backupdir = folder relative do $mountpoint where the backup should be stored (local or remote)
+# format = specify backup storage format: short, long or mirror (i.e, no rotations)
+# days = for short storage format, specify the number of backup increments (min = 5)
+# keepdaily = for long storage format, specify the number of daily backup increments
+# keepweekly = for long storage format, specify the number of weekly backup increments
+# keepmonthly = for long storage format, specify the number of monthly backup increments
# lockfile = lockfile to be kept during backup execution
# nicelevel = rsync command nice level
# enable_mv_timestamp_bug = set to "yes" if your system isnt handling timestamps correctly
# tmp = temp folder
+# multiconnection = set to "yes" if you want to use multiconnection ssh support
#
# [source]
# from = local or remote
# host = source hostname or ip, if remote backup
+# port = remote port number (remote source only)
+# user = remote user name (remote source only)
# testconnect = when "yes", test the connection for a remote source before backup
# include = include folder on backup
# exclude = exclude folder on backup
-# ssh = ssh command line (remote only)
+# ssh = ssh command line (remote source only)
+# protocol = ssh or rsync (remote source only)
# rsync = rsync program
# rsync_options = rsync command options
# exclude_vserver = vserver-name (valid only if vservers = yes on backupninja.conf)
@@ -39,6 +60,28 @@
# compress = if set to 1, compress data on rsync (remote source only)
# bandwidthlimit = set a badnwidth limit in kbps (remote source only)
# remote_rsync = remote rsync program (remote source only)
+# id_file = ssh key file (remote source only)
+# batch = set to "yes" to rsync use a batch file as source
+# batchbase = folder where the batch file is located
+# filelist = set yes if you want rsync to use a file list source
+# filelistbase = folder where the file list is placed
+#
+# [dest]
+# dest = backup destination type (local or remote)
+# testconnect = when "yes", test the connection for a remote source before backup
+# ssh = ssh command line (remote dest only)
+# protocol = ssh or rsync (remote dest only)
+# numericids = when set to 1, use numeric ids instead of user/group mappings on rsync
+# compress = if set to 1, compress data on rsync (remote source only)
+# host = destination host name (remote destination only)
+# port = remote port number (remote destination only)
+# user = remote user name (remote destination only)
+# id_file = ssh key file (remote destination only)
+# bandwidthlimit = set a badnwidth limit in kbps (remote destination only)
+# remote_rsync = remote rsync program (remote dest only)
+# batch = set to "yes" to rsync write a batch file from the changes
+# batchbase = folder where the batch file should be written
+# fakesuper = set to yes so rsync use the --fake-super flag (remote destination only)
#
# [services]
# initscripts = absolute path where scripts are located
@@ -56,297 +99,982 @@
# You dont need to manually specify vservers using "include = /vservers".
# They are automatically backuped if vserver is set to "yes" on you backupninja.conf.
#
-
-# config file evaluation
-
-setsection system
-getconf rm rm
-getconf cp cp
-getconf touch touch
-getconf mv mv
-getconf fsck fsck
-
-setsection general
-getconf log /var/log/backup/rsync.log
-getconf partition
-getconf fscheck
-getconf read_only
-getconf mountpoint
-getconf backupdir
-getconf rotate
-getconf days
-getconf lockfile
-getconf nicelevel 0
-getconf enable_mv_timestamp_bug no
-getconf tmp /tmp
-
-setsection source
-getconf from local
-getconf testconnect no
-getconf rsync $RSYNC
-getconf rsync_options "-av --delete"
-getconf ssh ssh
-getconf user
-getconf host
-getconf include
-getconf exclude
-getconf exclude_vserver
-getconf numericids 0
-getconf compress 0
-getconf bandwidthlimit
-getconf remote_rsync rsync
-
-setsection services
-getconf initscripts
-getconf service
+# Changelog
+# ---------
+#
+# 20090329 - rhatto at riseup.net
+#
+# - Added support for:
+# - Remote destinations
+# - Long rotation format similar to maildir handler
+# - Batch files through --read-batch and --write-batch
+# - Custom file list using --files-from
+# - SSH persistent connection using ControlMaster
+# - The rsync:// protocol
+# - Metadata folder for each backup folder
+# - General refactoring
+# - Code cleanup
+#
# function definitions
-function rotate {
+function eval_config {
+
+ # system section
+
+ setsection system
+ getconf rm rm
+ getconf cp cp
+ getconf touch touch
+ getconf mv mv
+ getconf fsck fsck
+
+ # general section
+
+ setsection general
+ getconf log /var/log/backup/rsync.log
+ getconf partition
+ getconf fscheck
+ getconf read_only
+ getconf mountpoint
+ getconf backupdir
+ getconf format short
+ getconf days
+ getconf keepdaily 5
+ getconf keepweekly 3
+ getconf keepmonthly 1
+ getconf lockfile
+ getconf nicelevel 0
+ getconf enable_mv_timestamp_bug no
+ getconf tmp /tmp
+ getconf multiconnection no
+
+ # source section
+
+ setsection source
+ getconf from local
+ getconf rsync $RSYNC
+ getconf rsync_options "-av --delete --recursive"
+
+ if [ "$from" == "remote" ]; then
+ getconf testconnect no
+ getconf protocol ssh
+ getconf ssh ssh
+ getconf host
+
+ if [ "$protocol" == "ssh" ]; then
+ # sshd default listen port
+ getconf port 22
+ else
+ # rsyncd default listen port
+ getconf port 873
+ fi
+
+ getconf user
+ getconf bandwidthlimit
+ getconf remote_rsync rsync
+ getconf id_file /root/.ssh/id_dsa
+ fi
+
+ getconf batch no
+
+ if [ "$batch" == "yes" ]; then
+ getconf batchbase
+ if [ ! -z "$batchbase" ]; then
+ batch="read"
+ fi
+ fi
+
+ getconf filelist no
+ getconf filelistbase
+ getconf include
+ getconf exclude
+ getconf exclude_vserver
+ getconf numericids 0
+ getconf compress 0
+
+ # dest section
+
+ setsection dest
+ getconf dest local
+ getconf fakesuper no
+
+ if [ "$dest" == "remote" ]; then
+ getconf testconnect no
+ getconf protocol ssh
+ getconf ssh ssh
+ getconf host
+
+ if [ "$protocol" == "ssh" ]; then
+ # sshd default listen port
+ getconf port 22
+ else
+ # rsyncd default listen port
+ getconf port 873
+ fi
+
+ getconf user
+ getconf bandwidthlimit
+ getconf remote_rsync rsync
+ getconf id_file /root/.ssh/id_dsa
+ fi
+
+ getconf batch no
+
+ if [ "$batch" != "yes" ]; then
+ getconf batch no
+ if [ "$batch" == "yes" ]; then
+ getconf batchbase
+ if [ ! -z "$batchbase" ]; then
+ batch="write"
+ fi
+ fi
+ fi
+
+ getconf numericids 0
+ getconf compress 0
+
+ # services section
+
+ setsection services
+ getconf initscripts /etc/init.d
+ getconf service
+
+ # config check
+
+ if [ "$dest" != "local" ] && [ "$from" == "remote" ]; then
+ fatal "When source is remote, destination should be local."
+ exit 1
+ fi
+
+ if [ "$from" != "local" ] && [ "$from" != "remote" ]; then
+ fatal "Invalid source $from"
+ exit 1
+ fi
+
+ backupdir="$mountpoint/$backupdir"
+
+ if [ "$dest" == "local" ] && [ ! -d "$backupdir" ]; then
+ error "Backupdir $backupdir does not exist"
+ exit 1
+ fi
+
+ if [ ! -z "$log" ]; then
+ mkdir -p `dirname $log`
+ fi
+
+ if [ "$format" == "short" ]; then
+ if [ -z "$days" ]; then
+ keep="4"
+ else
+ keep="`echo $days - 1 | bc -l`"
+ fi
+ fi
+
+ if [ ! -z "$nicelevel" ]; then
+ nice="nice -n $nicelevel"
+ else
+ nice=""
+ fi
+
+ ssh_cmd="ssh -T -o PasswordAuthentication=no $host -p $port -l $user -i $id_file"
+
+ if [ "$from" == "remote" ] || [ "$dest" == "remote" ]; then
+ if [ "$testconnect" == "yes" ] && [ "$protocol" == "ssh" ]; then
+ test_connect $host $port $user $id_file
+ fi
+ fi
+
+ if [ "$multiconnection" == "yes" ]; then
+ ssh_cmd="$ssh_cmd -S $tmp/%r@%h:%p"
+ fi
+
+ if [ $enable_mv_timestamp_bug == "yes" ]; then
+ mv=move_files
+ fi
+
+ for path in $exclude; do
+ excludes="$excludes --exclude=$path"
+ done
- if [[ "$2" < 4 ]]; then
- error "Rotate: minimum of 4 rotations"
- exit 1
- fi
+}
+
+function rotate_short {
+
+ local dest
+ local folder="$1"
+ local keep="$2"
+ local metadata="`dirname $folder`/metadata"
+
+ if [[ "$keep" < 4 ]]; then
+ error "Rotate: minimum of 4 rotations"
+ exit 1
+ fi
- if [ -d $1.$2 ]; then
- $nice $mv /$1.$2 /$1.tmp
- fi
+ if [ -d $folder.$keep ]; then
+ $nice $mv /$folder.$keep /$folder.tmp
+ fi
- for ((n=`echo "$2 - 1" | bc`; n >= 0; n--)); do
- if [ -d $1.$n ]; then
- dest=`echo "$n + 1" | bc`
- $nice $mv /$1.$n /$1.$dest
- $touch /$1.$dest
+ for ((n=`echo "$keep - 1" | bc`; n >= 0; n--)); do
+ if [ -d $folder.$n ]; then
+ dest=`echo "$n + 1" | bc`
+ $nice $mv /$folder.$n /$folder.$dest
+ $touch /$folder.$dest
+ mkdir -p $metadata/`basename $folder`.$dest
+ date +%c%n%s > $metadata/`basename $folder`.$dest/rotated
+ fi
+ done
+
+ if [ -d $folder.tmp ]; then
+ $nice $mv /$folder.tmp /$folder.0
+ fi
+
+ if [ -d $folder.1 ]; then
+ $nice $cp -alf /$folder.1/. /$folder.0
+ fi
+
+}
+
+function rotate_short_remote {
+
+ local folder="$1"
+ local metadata="`dirname $folder`/metadata"
+ local keep="$2"
+
+ if [[ "$2" < 4 ]]; then
+ error "Rotate: minimum of 4 rotations"
+ exit 1
+ fi
+
+(
+ $ssh_cmd <<EOF
+ ##### BEGIN REMOTE SCRIPT #####
+
+ if [ -d $folder.$keep ]; then
+ $nice mv /$folder.$keep /$folder.tmp
+ fi
+
+ for ((n=$(($keep - 1)); n >= 0; n--)); do
+ if [ -d $folder.\$n ]; then
+ dest=\$((\$n + 1))
+ $nice mv /$folder.\$n /$folder.\$dest
+ touch /$folder.\$dest
+ mkdir -p $metadata/`basename $folder`.\$dest
+ date +%c%n%s > $metadata/`basename $folder`.\$dest/rotated
+ fi
+ done
+
+ if [ -d $folder.tmp ]; then
+ $nice mv /$folder.tmp /$folder.0
+ fi
+
+ if [ -d $folder.1 ]; then
+ $nice $cp -alf /$folder.1/. /$folder.0
+ fi
+ ##### END REMOTE SCRIPT #######
+EOF
+) | (while read a; do passthru $a; done)
+
+}
+
+function rotate_long {
+
+ backuproot="$1"
+ seconds_daily=86400
+ seconds_weekly=604800
+ seconds_monthly=2628000
+ keepdaily=$keepdaily
+ keepweekly=$keepweekly
+ keepmonthly=$keepmonthly
+ now=`date +%s`
+
+ local metadata
+
+ if [ ! -d "$backuproot" ]; then
+ echo "Debug: skipping rotate of $backuproot as it doesn't exist."
+ exit
+ fi
+
+ for rottype in daily weekly monthly; do
+ seconds=$((seconds_${rottype}))
+
+ dir="$backuproot/$rottype"
+ metadata="$backuproot/metadata/$rottype.1"
+ mkdir -p $metadata
+ if [ ! -d $dir.1 ]; then
+ echo "Debug: $dir.1 does not exist, skipping."
+ continue 1
+ elif [ ! -f $metadata/created ] && [ ! -f $metadata/rotated ]; then
+ echo "Warning: metadata does not exist for $dir.1. This backup may be only partially completed. Skipping rotation."
+ continue 1
+ fi
+
+ # Rotate the current list of backups, if we can.
+ oldest=`find $backuproot -maxdepth 1 -type d -name $rottype'.*' | @SED@ 's/^.*\.//' | sort -n | tail -1`
+ [ "$oldest" == "" ] && oldest=0
+ for (( i=$oldest; i > 0; i-- )); do
+ if [ -d $dir.$i ]; then
+ if [ -f $metadata/created ]; then
+ created=`tail -1 $metadata/created`
+ elif [ -f $metadata/rotated ]; then
+ created=`tail -1 $metadata/rotated`
+ else
+ created=0
+ fi
+ cutoff_time=$(( now - (seconds*(i-1)) ))
+ if [ ! $created -gt $cutoff_time ]; then
+ next=$(( i + 1 ))
+ if [ ! -d $dir.$next ]; then
+ echo "Debug: $rottype.$i --> $rottype.$next"
+ $nice mv $dir.$i $dir.$next
+ mkdir -p $backuproot/metadata/$rottype.$next
+ date +%c%n%s > $backuproot/metadata/$rottype.$next/rotated
+ else
+ echo "Debug: skipping rotation of $dir.$i because $dir.$next already exists."
+ fi
+ else
+ echo "Debug: skipping rotation of $dir.$i because it was created" $(( (now-created)/86400)) "days ago ("$(( (now-cutoff_time)/86400))" needed)."
+ fi
fi
- done
+ done
+ done
+
+ max=$((keepdaily+1))
+ if [ $keepweekly -gt 0 -a -d $backuproot/daily.$max -a ! -d $backuproot/weekly.1 ]; then
+ echo "Debug: daily.$max --> weekly.1"
+ $nice mv $backuproot/daily.$max $backuproot/weekly.1
+ mkdir -p $backuproot/metadata/weekly.1
+ date +%c%n%s > $backuproot/metadata/weekly.1/rotated
+ fi
+
+ max=$((keepweekly+1))
+ if [ $keepmonthly -gt 0 -a -d $backuproot/weekly.$max -a ! -d $backuproot/monthly.1 ]; then
+ echo "Debug: weekly.$max --> monthly.1"
+ $nice mv $backuproot/weekly.$max $backuproot/monthly.1
+ mkdir -p $backuproot/metadata/monthly.1
+ date +%c%n%s > $backuproot/metadata/monthly.1/rotated
+ fi
+
+ for rottype in daily weekly monthly; do
+ max=$((keep${rottype}+1))
+ dir="$backuproot/$rottype"
+ oldest=`find $backuproot -maxdepth 1 -type d -name $rottype'.*' | @SED@ 's/^.*\.//' | sort -n | tail -1`
+ [ "$oldest" == "" ] && oldest=0
+ # if we've rotated the last backup off the stack, remove it.
+ for (( i=$oldest; i >= $max; i-- )); do
+ if [ -d $dir.$i ]; then
+ if [ -d $backuproot/rotate.tmp ]; then
+ echo "Debug: removing rotate.tmp"
+ $nice rm -rf $backuproot/rotate.tmp
+ fi
+ echo "Debug: moving $rottype.$i to rotate.tmp"
+ $nice mv $dir.$i $backuproot/rotate.tmp
+ fi
+ done
+ done
- if [ -d $1.tmp ]; then
- $nice $mv /$1.tmp /$1.0
- fi
+}
- if [ -d $1.1 ]; then
- $nice $cp -alf /$1.1/. /$1.0
- fi
+function rotate_long_remote {
+
+ local backuproot="$1"
+
+(
+ $ssh_cmd <<EOF
+ ##### BEGIN REMOTE SCRIPT #####
+
+ seconds_daily=86400
+ seconds_weekly=604800
+ seconds_monthly=2628000
+ keepdaily=$keepdaily
+ keepweekly=$keepweekly
+ keepmonthly=$keepmonthly
+ now=\`date +%s\`
+
+ if [ ! -d "$backuproot" ]; then
+ echo "Debug: skipping rotate of $backuproot as it doesn't exist."
+ exit
+ fi
+
+ for rottype in daily weekly monthly; do
+ seconds=\$((seconds_\${rottype}))
+
+ dir="$backuproot/\$rottype"
+ metadata="$backuproot/metadata/\$rottype.1"
+ mkdir -p \$metadata
+ if [ ! -d \$dir.1 ]; then
+ echo "Debug: \$dir.1 does not exist, skipping."
+ continue 1
+ elif [ ! -f \$metadata/created ] && [ ! -f \$metadata/rotated ]; then
+ echo "Warning: metadata does not exist for \$dir.1. This backup may be only partially completed. Skipping rotation."
+ continue 1
+ fi
+
+ # Rotate the current list of backups, if we can.
+ oldest=\`find $backuproot -maxdepth 1 -type d -name \$rottype'.*' | @SED@ 's/^.*\.//' | sort -n | tail -1\`
+ [ "\$oldest" == "" ] && oldest=0
+ for (( i=\$oldest; i > 0; i-- )); do
+ if [ -d \$dir.\$i ]; then
+ if [ -f \$metadata/created ]; then
+ created=\`tail -1 \$metadata/created\`
+ elif [ -f \$metadata/rotated ]; then
+ created=\`tail -1 \$metadata/rotated\`
+ else
+ created=0
+ fi
+ cutoff_time=\$(( now - (seconds*(i-1)) ))
+ if [ ! \$created -gt \$cutoff_time ]; then
+ next=\$(( i + 1 ))
+ if [ ! -d \$dir.\$next ]; then
+ echo "Debug: \$rottype.\$i --> \$rottype.\$next"
+ $nice mv \$dir.\$i \$dir.\$next
+ mkdir -p $backuproot/metadata/\$rottype.\$next
+ date +%c%n%s > $backuproot/metadata/\$rottype.\$next/rotated
+ else
+ echo "Debug: skipping rotation of \$dir.\$i because \$dir.\$next already exists."
+ fi
+ else
+ echo "Debug: skipping rotation of \$dir.\$i because it was created" \$(( (now-created)/86400)) "days ago ("\$(( (now-cutoff_time)/86400))" needed)."
+ fi
+ fi
+ done
+ done
+
+ max=\$((keepdaily+1))
+ if [ \$keepweekly -gt 0 -a -d $backuproot/daily.\$max -a ! -d \$backuproot/weekly.1 ]; then
+ echo "Debug: daily.\$max --> weekly.1"
+ $nice mv $backuproot/daily.\$max $backuproot/weekly.1
+ mkdir -p $backuproot/metadata/weekly.1
+ date +%c%n%s > $backuproot/metadata/weekly.1/rotated
+ fi
+
+ max=\$((keepweekly+1))
+ if [ \$keepmonthly -gt 0 -a -d $backuproot/weekly.\$max -a ! -d $backuproot/monthly.1 ]; then
+ echo "Debug: weekly.\$max --> monthly.1"
+ $nice mv $backuproot/weekly.\$max $backuproot/monthly.1
+ mkdir -p $backuproot/metadata/monthly.1
+ date +%c%n%s > $backuproot/metadata/monthly.1/rotated
+ fi
+
+ for rottype in daily weekly monthly; do
+ max=\$((keep\${rottype}+1))
+ dir="$backuproot/\$rottype"
+ oldest=\`find $backuproot -maxdepth 1 -type d -name \$rottype'.*' | @SED@ 's/^.*\.//' | sort -n | tail -1\`
+ [ "\$oldest" == "" ] && oldest=0
+ # if we've rotated the last backup off the stack, remove it.
+ for (( i=\$oldest; i >= \$max; i-- )); do
+ if [ -d \$dir.\$i ]; then
+ if [ -d $backuproot/rotate.tmp ]; then
+ echo "Debug: removing rotate.tmp"
+ $nice rm -rf $backuproot/rotate.tmp
+ fi
+ echo "Debug: moving \$rottype.\$i to rotate.tmp"
+ $nice mv \$dir.\$i $backuproot/rotate.tmp
+ fi
+ done
+ done
+ ##### END REMOTE SCRIPT #######
+EOF
+) | (while read a; do passthru $a; done)
+
+}
+
+function setup_long_dirs {
+
+ local destdir=$1
+ local backuptype=$2
+ local dir="$destdir/$backuptype"
+ local tmpdir="$destdir/rotate.tmp"
+ local metadata="$destdir/metadata/$backuptype.1"
+
+ if [ ! -d $destdir ]; then
+ echo "Creating destination directory $destdir..."
+ mkdir -p $destdir
+ fi
+
+ if [ -d $dir.1 ]; then
+ if [ -f $metadata/created ]; then
+ echo "Warning: $dir.1 already exists. Overwriting contents."
+ else
+ echo "Warning: we seem to be resuming a partially written $dir.1"
+ fi
+ else
+ if [ -d $tmpdir ]; then
+ mv $tmpdir $dir.1
+ if [ $? == 1 ]; then
+ echo "Fatal: could mv $destdir/rotate.tmp $dir.1 on host $host"
+ exit 1
+ fi
+ else
+ mkdir --parents $dir.1
+ if [ $? == 1 ]; then
+ echo "Fatal: could not create directory $dir.1 on host $host"
+ exit 1
+ fi
+ fi
+ if [ -d $dir.2 ]; then
+ echo "Debug: update links $backuptype.2 --> $backuptype.1"
+ cp -alf $dir.2/. $dir.1
+ #if [ $? == 1 ]; then
+ # echo "Fatal: could not create hard links to $dir.1 on host $host"
+ # exit 1
+ #fi
+ fi
+ fi
+ [ -f $metadata/created ] && rm $metadata/created
+ [ -f $metadata/rotated ] && rm $metadata/rotated
+
+}
+
+function setup_long_dirs_remote {
+
+ local destdir=$1
+ local backuptype=$2
+ local dir="$destdir/$backuptype"
+ local tmpdir="$destdir/rotate.tmp"
+ local metadata="$destdir/metadata/$backuptype.1"
+
+(
+ $ssh_cmd <<EOF
+ ##### BEGIN REMOTE SCRIPT #####
+ if [ ! -d $destdir ]; then
+ echo "Creating destination directory $destdir on $host..."
+ mkdir -p $destdir
+ fi
+
+ if [ -d $dir.1 ]; then
+ if [ -f $metadata/created ]; then
+ echo "Warning: $dir.1 already exists. Overwriting contents."
+ else
+ echo "Warning: we seem to be resuming a partially written $dir.1"
+ fi
+ else
+ if [ -d $tmpdir ]; then
+ mv $tmpdir $dir.1
+ if [ \$? == 1 ]; then
+ echo "Fatal: could mv $destdir/rotate.tmp $dir.1 on host $host"
+ exit 1
+ fi
+ else
+ mkdir --parents $dir.1
+ if [ \$? == 1 ]; then
+ echo "Fatal: could not create directory $dir.1 on host $host"
+ exit 1
+ fi
+ fi
+ if [ -d $dir.2 ]; then
+ echo "Debug: update links $backuptype.2 --> $backuptype.1"
+ cp -alf $dir.2/. $dir.1
+ #if [ \$? == 1 ]; then
+ # echo "Fatal: could not create hard links to $dir.1 on host $host"
+ # exit 1
+ #fi
+ fi
+ fi
+ [ -f $metadata/created ] && rm $metadata/created
+ [ -f $metadata/rotated ] && rm $metadata/rotated
+ ##### END REMOTE SCRIPT #######
+EOF
+) | (while read a; do passthru $a; done)
}
function move_files {
- ref=$tmp/makesnapshot-mymv-$$;
- $touch -r $1 $ref;
- $mv $1 $2;
- $touch -r $ref $2;
- $rm $ref;
+ ref=$tmp/makesnapshot-mymv-$$;
+ $touch -r $1 $ref;
+ $mv $1 $2;
+ $touch -r $ref $2;
+ $rm $ref;
+
+}
+
+function prepare_storage {
+
+ section="`basename $SECTION`"
+
+ if [ "$format" == "short" ]; then
+
+ suffix="$section.0"
+ info "Rotating $backupdir/$SECTION..."
+ echo "Rotating $backupdir/$SECTION..." >> $log
+
+ if [ "$dest" == "remote" ]; then
+ rotate_short_remote $backupdir/$SECTION/$section $keep
+ else
+ rotate_short $backupdir/$SECTION/$section $keep
+ if [ ! -d "$backupdir/$SECTION/$section.0" ]; then
+ mkdir -p $backupdir/$SECTION/$section.0
+ fi
+ fi
+
+ elif [ "$format" == "long" ]; then
+
+ if [ $keepdaily -gt 0 ]; then
+ btype=daily
+ elif [ $keepweekly -gt 0 ]; then
+ btype=weekly
+ elif [ $keepmonthly -gt 0 ]; then
+ btype=monthly
+ else
+ fatal "keeping no backups";
+ exit 1
+ fi
+
+ suffix="$btype.1"
+ info "Rotating $backupdir/$SECTION/..."
+ echo "Rotating $backupdir/$SECTION/..." >> $log
+
+ if [ "$dest" == "remote" ]; then
+ rotate_long_remote $backupdir/$SECTION
+ setup_long_dirs_remote $backupdir/$SECTION $btype
+ else
+ rotate_long $backupdir/$SECTION
+ setup_long_dirs $backupdir/$SECTION $btype
+ fi
+
+ elif [ "$format" == "mirror" ]; then
+ suffix=""
+ else
+ fatal "Invalid backup format $format"
+ exit 1
+ fi
+
+}
+
+function set_orig {
+
+ if [ "$from" == "local" ]; then
+ orig="/$SECTION/"
+ elif [ "$from" == "remote" ]; then
+ if [ "$protocol" == "rsync" ]; then
+ orig="rsync://$user@$host:$port/$SECTION/"
+ else
+ orig="$user@$host:/$SECTION/"
+ fi
+ fi
}
-backupdir="$mountpoint/$backupdir"
+function set_dest {
-# does $backupdir exists?
+ if [ "$dest" == "local" ]; then
+ dest_path="$backupdir/$SECTION/$suffix/"
+ else
+ if [ "$protocol" == "rsync" ]; then
+ dest_path="rsync://$user@$host:$port/$backupdir/$SECTION/$suffix/"
+ else
+ dest_path="$user@$host:$backupdir/$SECTION/$suffix/"
+ fi
+ fi
-if [ ! -d "$backupdir" ]; then
- error "Backupdir $backupdir does not exist"
- exit 1
-fi
+}
-# setup number of increments
+function set_batch_mode {
-if [ -z "$days" ]; then
- keep="4"
-else
- keep="`echo $days - 1 | bc -l`"
-fi
+ local batch_file="$batchbase/$SECTION/$suffix"
-# lockfile setup
+ if [ "$batch" == "read" ]; then
+ if [ -e "$batch_file" ]; then
+ orig=""
+ excludes=""
+ batch_option="--read-batch=$batch_file"
+ else
+ fatal "Batch file not found: $batch_file"
+ exit 1
+ fi
+ elif [ "$batch" == "write" ]; then
+ mkdir -p `dirname $batch_file`
+ batch_option="--write-batch=$batch_file"
+ fi
-if [ ! -z "$lockfile" ]; then
- $touch $lockfile || warning "Could not create lockfile $lockfile"
-fi
+}
-# nicelevel setup
+function update_metadata {
-if [ ! -z "$nicelevel" ]; then
- nice="nice -n $nicelevel"
-else
- nice=""
-fi
+ local metadata
+ local folder
-# connection test
+ if [ "$dest" == "local" ]; then
+ metadata="`dirname $dest_path`/metadata/`basename $dest_path`"
+ mkdir -p $metadata
+ date +%c%n%s > $metadata/created
+ $touch $backupdir/$SECTION/$suffix
+ else
+ folder="`echo $dest_path | cut -d : -f 2`"
+ metadata="`dirname $folder`/metadata/`basename $folder`"
-if [ "$from" == "remote" ] && [ "$testconnect" == "yes" ]; then
- debug "$ssh -o PasswordAuthentication=no $user@$host 'echo -n 1'"
- result=`ssh -o PasswordAuthentication=no $user@$host 'echo -n 1'`
- if [ "$result" != "1" ]; then
- fatal "Can't connect to $host as $user."
- else
- debug "Connected to $srchost successfully"
- fi
-fi
+(
+ $ssh_cmd <<EOF
+ ##### BEGIN REMOTE SCRIPT #####
+ mkdir -p $metadata
+ date +%c%n%s > $metadata/created
+ ##### END REMOTE SCRIPT #######
+EOF
+) | (while read a; do passthru $a; done)
-# rsync options for local sources
+ fi
-if [ "$from" == "local" ]; then
+}
- rsync_local_options="$rsync_options"
+function test_connect {
- if [ ! -z "$numericids" ]; then
- rsync_local_options="$rsync_local_options --numeric-ids "
- fi
+ local host="$1"
+ local port="$2"
+ local user="$3"
+ local id_file="$4"
-fi
+ if [ -z "$host" ] || [ -z "$user" ]; then
+ fatal "Remote host or user not set"
+ exit 1
+ fi
-# rsync options for remote sources
+ debug "$ssh_cmd 'echo -n 1'"
+ result=`$ssh_cmd 'echo -n 1'`
-if [ "$from" == "remote" ]; then
+ if [ "$result" != "1" ]; then
+ fatal "Can't connect to $host as $user."
+ exit 1
+ else
+ debug "Connected to $host successfully"
+ fi
- rsync_remote_options="$rsync_options --rsync-path=$remote_rsync"
+}
- if [ "$compress" == "1" ]; then
- rsync_remote_options="$rsync_remote_options --compress"
- fi
+function set_lockfile {
- if [ ! -z "$bandwidthlimit" ]; then
- rsync_remote_options="$rsync_remote_options --bwlimit=$bandwidthlimit"
- fi
+ if [ ! -z "$lockfile" ]; then
+ $touch $lockfile || warning "Could not create lockfile $lockfile"
+ fi
- if [ ! -z "$numericids" ]; then
- rsync_remote_options="$rsync_remote_options --numeric-ids"
- fi
+}
-fi
+function unset_lockfile {
-# set mv procedure
+ if [ ! -z "$lockfile" ]; then
+ $rm $lockfile || warning "Could not remove lockfile $lockfile"
+ fi
-if [ $enable_mv_timestamp_bug == "yes" ]; then
- mv=move_files
-fi
+}
-# set excludes
+function set_filelist {
-for path in $exclude; do
- EXCLUDES="$EXCLUDES --exclude=$path"
-done
+ filelist_flag=""
-# stop services
+ if [ "$filelist" == "yes" ]; then
+ if [ ! -z "$filelistbase" ]; then
+ if [ -e "$filelistbase/$SECTION/$suffix" ]; then
+ filelist_flag="--files-from=$filelistbase/$SECTION/$suffix"
+ else
+ warning "File list $filelistbase/$SECTION/$suffix not found."
+ fi
+ else
+ warning "No filelistbase set."
+ fi
+ fi
-if [ ! -z "$service" ]; then
- for daemon in $service; do
+}
+
+function set_rsync_options {
+
+ if [ ! -z "$numericids" ]; then
+ rsync_options="$rsync_options --numeric-ids"
+ fi
+
+ if [ "$from" == "local" ] || [ "$dest" == "local" ]; then
+ # rsync options for local sources or destinations
+ rsync_options="$rsync_options"
+ fi
+
+ if [ "$from" == "remote" ] || [ "$dest" == "remote" ]; then
+
+ # rsync options for remote sources or destinations
+
+ if [ "$compress" == "1" ]; then
+ rsync_options="$rsync_options --compress"
+ fi
+
+ if [ ! -z "$bandwidthlimit" ]; then
+ rsync_options="$rsync_options --bwlimit=$bandwidthlimit"
+ fi
+
+ if [ "$fakesuper" == "yes" ]; then
+ remote_rsync="$remote_rsync --fake-super"
+ fi
+
+ rsync_options=($rsync_options --rsync-path="$remote_rsync")
+
+ if [ "$protocol" == "ssh" ]; then
+ if [ ! -e "$id_file" ]; then
+ fatal "SSH Identity file $id_file not found"
+ exit 1
+ else
+ debug RSYNC_RSH=\"$ssh_cmd\"
+ echo RSYNC_RSH=\"$ssh_cmd\" >> $log
+ RSYNC_RSH="$ssh_cmd"
+ fi
+ fi
+
+ fi
+
+ include_vservers
+
+}
+
+function stop_services {
+
+ if [ ! -z "$service" ]; then
+ for daemon in $service; do
info "Stopping service $daemon..."
$initscripts/$daemon stop
- done
-fi
+ done
+ fi
-echo "Starting backup at `date`" >> $log
+}
+
+function start_services {
+
+ # restart services
+
+ if [ ! -z "$service" ]; then
+ for daemon in $service; do
+ info "Starting service $daemon..."
+ $initscripts/$daemon start
+ done
+ fi
+
+}
+
+function mount_rw {
+
+ # mount backup destination folder as read-write
+
+ if [ "$dest" == "local" ]; then
+ if [ "$read_only" == "1" ] || [ "$read_only" == "yes" ]; then
+ if [ -d "$mountpoint" ]; then
+ mount -o remount,rw $mountpoint
+ if (($?)); then
+ error "Could not mount $mountpoint"
+ exit 1
+ fi
+ fi
+ fi
+ fi
+
+}
+
+function mount_ro {
+
+ # remount backup destination as read-only
+
+ if [ "$dest" == "local" ]; then
+ if [ "$read_only" == "1" ] || [ "$read_only" == "yes" ]; then
+ mount -o remount,ro $mountpoint
+ fi
+ fi
+
+}
-# mount backup destination folder as read-write
+function run_fsck {
-if [ "$read_only" == "1" ] || [ "$read_only" == "yes" ]; then
- if [ -d "$mountpoint" ]; then
- mount -o remount,rw $mountpoint
+ # check partition for errors
+
+ if [ "$dest" == "local" ]; then
+ if [ "$fscheck" == "1" ] || [ "$fscheck" == "yes" ]; then
+ umount $mountpoint
if (($?)); then
- error "Could not mount $mountpoint"
- exit 1
+ warning "Could not umount $mountpoint to run fsck"
+ else
+ $nice $fsck -v -y $partition >> $log
+ mount $mountpoint
fi
- fi
-fi
+ fi
+ fi
+
+}
-# add vservers to included folders
+function include_vservers {
-if [ "$vservers_are_available" == "yes" ]; then
+ # add vservers to included folders
- # sane permission on backup
- mkdir -p $backupdir/$VROOTDIR
- chmod 000 $backupdir/$VROOTDIR
+ if [ "$vservers_are_available" == "yes" ]; then
- for candidate in $found_vservers; do
+ # sane permission on backup
+ mkdir -p $backupdir/$VROOTDIR
+ chmod 000 $backupdir/$VROOTDIR
+
+ for candidate in $found_vservers; do
candidate="`basename $candidate`"
found_excluded_vserver="0"
for excluded_vserver in $exclude_vserver; do
- if [ "$excluded_vserver" == "$candidate" ]; then
- found_excluded_vserver="1"
- break
- fi
+ if [ "$excluded_vserver" == "$candidate" ]; then
+ found_excluded_vserver="1"
+ break
+ fi
done
if [ "$found_excluded_vserver" == "0" ]; then
- include="$include $VROOTDIR/$candidate"
+ include="$include $VROOTDIR/$candidate"
fi
- done
-fi
+ done
+ fi
-# the backup procedure
+}
-for SECTION in $include; do
+function start_mux {
- section="`basename $SECTION`"
+ if [ "$multiconnection" == "yes" ]; then
+ debug "Starting master ssh connection"
+ $ssh_cmd -M sleep 1d &
+ sleep 1
+ fi
- if [ ! -d "$backupdir/$SECTION/$section.0" ]; then
- mkdir -p $backupdir/$SECTION/$section.0
- fi
+}
- info "Rotating $backupdir/$SECTION/$section..."
- echo "Rotating $backupdir/$SECTION/$section..." >> $log
- rotate $backupdir/$SECTION/$section $keep
- info "Syncing $SECTION on $backupdir/$SECTION/$section.0..."
+function end_mux {
- if [ "$from" == "local" ]; then
- debug $rsync $rsync_local_options $EXCLUDES /$SECTION/ $backupdir/$SECTION/$section.0/
- $nice $rsync $rsync_local_options $EXCLUDES /$SECTION/ $backupdir/$SECTION/$section.0/ >> $log
- if [ "$?" != "0" ]; then
- warning "Rsync error when trying to transfer $SECTION"
- fi
- elif [ "$from" == "remote" ]; then
- if [ -z "$user" ] || [ -z "$host" ]; then
- error "Config file error: either user or host was not specified"
- exit 1
- else
- debug $nice $rsync $rsync_remote_options $EXCLUDES -e "$ssh" $user@$host:/$SECTION/ $backupdir/$SECTION/$section.0
- $nice $rsync $rsync_remote_options $EXCLUDES -e "$ssh" $user@$host:/$SECTION/ $backupdir/$SECTION/$section.0 >> $log
- if [ "$?" != "0" ]; then
- warning "Rsync error when trying to transfer $SECTION"
- fi
- fi
- else
- error "Invalid source $from"
- exit 1
- fi
+ if [ "$multiconnection" == "yes" ]; then
+ debug "Stopping master ssh connection"
+ $ssh_cmd pkill sleep
+ fi
- $touch $backupdir/$SECTION/$section.0
+}
-done
+# the backup procedure
-# remount backup destination as read-only
+eval_config
+set_lockfile
+set_rsync_options
+start_mux
+stop_services
+mount_rw
-if [ "$read_only" == "1" ] || [ "$read_only" == "yes" ]; then
- mount -o remount,ro $mountpoint
-fi
+echo "Starting backup at `date`" >> $log
-# check partition for errors
+for SECTION in $include; do
-if [ "$fscheck" == "1" ] || [ "$fscheck" == "yes" ]; then
- umount $mountpoint
- if (($?)); then
- warning "Could not umount $mountpoint to run fsck"
- else
- $nice $fsck -v -y $partition >> $log
- mount $mountpoint
- fi
-fi
+ prepare_storage
+ set_orig
+ set_batch_mode
+ set_filelist
+ set_dest
-# restart services
+ info "Syncing $SECTION on $dest_path..."
+ debug $nice $rsync "${rsync_options[@]}" $filelist_flag $excludes $batch_option $orig $dest_path
+ $nice $rsync "${rsync_options[@]}" $filelist_flag $excludes $batch_option $orig $dest_path >> $log
-if [ ! -z "$service" ]; then
- for daemon in $service; do
- info "Starting service $daemon..."
- $initscripts/$daemon start
- done
-fi
+ if [ "$?" != "0" ]; then
+ warning "Rsync error when trying to transfer $SECTION"
+ fi
+
+ update_metadata
-# removes the lockfile
+done
-if [ ! -z "$lockfile" ]; then
- $rm $lockfile || warning "Could not remove lockfile $lockfile"
-fi
+mount_ro
+run_fsck
+start_services
+unset_lockfile
+end_mux
echo "Finnishing backup at `date`" >> $log