aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorMicah Anderson <micah@riseup.net>2010-01-27 17:45:21 -0500
committerMicah Anderson <micah@riseup.net>2010-01-27 17:45:21 -0500
commit3af5f0dd53086f92b4c235740684bdff62377bfe (patch)
tree112c3a3da88787a8fed828ec3c945aaffd309f6f
parent6e8c722ca27c04b03302df7972582f6b2588aa61 (diff)
downloadbackupninja-3af5f0dd53086f92b4c235740684bdff62377bfe.tar.gz
backupninja-3af5f0dd53086f92b4c235740684bdff62377bfe.tar.bz2
Update README and INSTALL to be more clear how to install backupninja
-rw-r--r--INSTALL241
-rw-r--r--README92
2 files changed, 46 insertions, 287 deletions
diff --git a/INSTALL b/INSTALL
index 095b1eb..2895b6e 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,231 +1,20 @@
-Installation Instructions
-*************************
+INSTALLATION
+============
+
+Requirements:
+ bash gawk
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004 Free
-Software Foundation, Inc.
+Recommended:
+ rdiff-backup duplicity rsync gzip hwinfo sfdisk
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
+Installation:
+ To install backupninja, simply do the following:
-Basic Installation
-==================
+ $ ./autogen.sh
+ $ ./configure
+ $ make
+ $ make install
-These are generic installation instructions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
-
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
-Compilers and Options
-=====================
-
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about. Run `./configure --help' for
-details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
-By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PREFIX'.
-
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PREFIX', the package will
-use PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
- CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
- OS KERNEL-OS
-
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
- If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
-
- ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
-`configure' recognizes the following options to control how it operates.
-
-`--help'
-`-h'
- Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
-
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
-
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
+ You may wish to change the install locations, or other options. To find
+ the available possibilities, run ./configure --help.
diff --git a/README b/README
index 04eda2f..8b01add 100644
--- a/README
+++ b/README
@@ -46,6 +46,37 @@ The following options are available:
--run FILE Runs the specified action FILE (e.g. one of the /etc/backup.d/ files).
Also puts backupninja in debug mode.
+NINJAHELPER
+===========
+
+Ninjahelper is an additional script which will walk you through the process of
+configuring backupninja. Ninjahelper has a menu driven curses based interface
+(using dialog).
+
+To add an additional 'wizard' to ninjahelper, follow these steps:
+
+(1) to add a helper for the handler "blue", create the file
+ blue.helper in the directory where the handlers live.
+ (ie /usr/share/backupninja).
+
+(2) next, you need to add your helper to the global HELPERS variable
+ and define the main function for your helper (the function name
+ is always <helper>_wizard). for example, blue.helper:
+ HELPERS="$HELPERS blue:description_of_this_helper"
+ blue_wizard() {
+ ... do work here ...
+ }
+
+(3) look at the existing helpers to see how they are written. Try to re-use
+ functions, such as the dialog functions that are defined in easydialog.sh,
+ or the vserver functions defined in lib/vserver.
+
+(4) test, re-test, and test again. Try to break the helper by going backwards,
+ try to think like someone who has no idea how to configure your handler
+ would think, try to make your helper as simple as possible. Walk like a cat,
+ become your shadow, don't let your senses betray you.
+
+
CONFIGURATION FILES
===================
@@ -192,38 +223,6 @@ operation therefore reducing the costs. The boto Python interface to Amazon
Web Services is needed to use duplicity with S3 (Debian package: python-boto).
-INSTALLATION
-============
-
-Requirements:
- apt-get install bash gawk
-
-Recommended:
- apt-get install rdiff-backup gzip hwinfo
-
-Files:
- /usr/sbin/backupninja -- main script
- /etc/cron.d/backupninja -- runs main script nightly
- /etc/logrotate.d/backupninja -- rotates backupninja.log
- /etc/backup.d/ -- directory for configuration files
- /etc/backupninja.conf -- general options
- /usr/share/backupninja -- handler scripts which do the actual work
-
-Installation:
- There is no install script, but you just need to move files to the
- correct locations. All files should be owned by root.
-
- # tar xvzf backupninja.tar.gz
- # cd backupninja
- # mv backupninja /usr/sbin/backupninja
- # mv ninjahelper /usr/sbin/ninjahelper
- # mv etc/logrotate.d/backupninja /etc/logrotate.d/backupninja
- # mv etc/cron.d/backupninja /etc/cron.d/backupninja
- # mkdir /etc/backup.d/
- # mv etc/backupninja.conf /etc/backupninja.conf
- # mv handlers /usr/share/backupninja
-
-
VSERVERS
========
@@ -242,32 +241,3 @@ VSERVERINFO (default: /usr/sbin/vserver-info)
VSERVER (default: /usr/sbin/vserver)
VROOTDIR (default: `$VSERVERINFO info SYSINFO |grep vserver-Rootdir | awk '{print $2}'`)
-NINJAHELPER
-===========
-
-Ninjahelper is an additional script which will walk you through the process of
-configuring backupninja. Ninjahelper has a menu driven curses based interface
-(using dialog).
-
-To add an additional 'wizard' to ninjahelper, follow these steps:
-
-(1) to add a helper for the handler "blue", create the file
- blue.helper in the directory where the handlers live.
- (ie /usr/share/backupninja).
-
-(2) next, you need to add your helper to the global HELPERS variable
- and define the main function for your helper (the function name
- is always <helper>_wizard). for example, blue.helper:
- HELPERS="$HELPERS blue:description_of_this_helper"
- blue_wizard() {
- ... do work here ...
- }
-
-(3) look at the existing helpers to see how they are written. Try to re-use
- functions, such as the dialog functions that are defined in easydialog.sh,
- or the vserver functions defined in lib/vserver.
-
-(4) test, re-test, and test again. Try to break the helper by going backwards,
- try to think like someone who has no idea how to configure your handler
- would think, try to make your helper as simple as possible. Walk like a cat,
- become your shadow, don't let your senses betray you.