diff options
Diffstat (limited to 'share/templater/drupal-composer/files/default.settings.php')
-rw-r--r-- | share/templater/drupal-composer/files/default.settings.php | 804 |
1 files changed, 0 insertions, 804 deletions
diff --git a/share/templater/drupal-composer/files/default.settings.php b/share/templater/drupal-composer/files/default.settings.php deleted file mode 100644 index 59afc6c..0000000 --- a/share/templater/drupal-composer/files/default.settings.php +++ /dev/null @@ -1,804 +0,0 @@ -<?php - -/** - * @file - * Drupal site-specific configuration file. - * - * IMPORTANT NOTE: - * This file may have been set to read-only by the Drupal installation program. - * If you make changes to this file, be sure to protect it again after making - * your modifications. Failure to remove write permissions to this file is a - * security risk. - * - * In order to use the selection rules below the multisite aliasing file named - * sites/sites.php must be present. Its optional settings will be loaded, and - * the aliases in the array $sites will override the default directory rules - * below. See sites/example.sites.php for more information about aliases. - * - * The configuration directory will be discovered by stripping the website's - * hostname from left to right and pathname from right to left. The first - * configuration file found will be used and any others will be ignored. If no - * other configuration file is found then the default configuration file at - * 'sites/default' will be used. - * - * For example, for a fictitious site installed at - * https://www.drupal.org:8080/mysite/test/, the 'settings.php' file is searched - * for in the following directories: - * - * - sites/8080.www.drupal.org.mysite.test - * - sites/www.drupal.org.mysite.test - * - sites/drupal.org.mysite.test - * - sites/org.mysite.test - * - * - sites/8080.www.drupal.org.mysite - * - sites/www.drupal.org.mysite - * - sites/drupal.org.mysite - * - sites/org.mysite - * - * - sites/8080.www.drupal.org - * - sites/www.drupal.org - * - sites/drupal.org - * - sites/org - * - * - sites/default - * - * Note that if you are installing on a non-standard port number, prefix the - * hostname with that number. For example, - * https://www.drupal.org:8080/mysite/test/ could be loaded from - * sites/8080.www.drupal.org.mysite.test/. - * - * @see example.sites.php - * @see \Drupal\Core\DrupalKernel::getSitePath() - * - * In addition to customizing application settings through variables in - * settings.php, you can create a services.yml file in the same directory to - * register custom, site-specific service definitions and/or swap out default - * implementations with custom ones. - */ - -/** - * Database settings: - * - * The $databases array specifies the database connection or - * connections that Drupal may use. Drupal is able to connect - * to multiple databases, including multiple types of databases, - * during the same request. - * - * One example of the simplest connection array is shown below. To use the - * sample settings, copy and uncomment the code below between the @code and - * @endcode lines and paste it after the $databases declaration. You will need - * to replace the database username and password and possibly the host and port - * with the appropriate credentials for your database system. - * - * The next section describes how to customize the $databases array for more - * specific needs. - * - * @code - * $databases['default']['default'] = array ( - * 'database' => 'databasename', - * 'username' => 'sqlusername', - * 'password' => 'sqlpassword', - * 'host' => 'localhost', - * 'port' => '3306', - * 'driver' => 'mysql', - * 'prefix' => '', - * 'collation' => 'utf8mb4_general_ci', - * ); - * @endcode - */ -$databases = array(); - -/** - * Customizing database settings. - * - * Many of the values of the $databases array can be customized for your - * particular database system. Refer to the sample in the section above as a - * starting point. - * - * The "driver" property indicates what Drupal database driver the - * connection should use. This is usually the same as the name of the - * database type, such as mysql or sqlite, but not always. The other - * properties will vary depending on the driver. For SQLite, you must - * specify a database file name in a directory that is writable by the - * webserver. For most other drivers, you must specify a - * username, password, host, and database name. - * - * Transaction support is enabled by default for all drivers that support it, - * including MySQL. To explicitly disable it, set the 'transactions' key to - * FALSE. - * Note that some configurations of MySQL, such as the MyISAM engine, don't - * support it and will proceed silently even if enabled. If you experience - * transaction related crashes with such configuration, set the 'transactions' - * key to FALSE. - * - * For each database, you may optionally specify multiple "target" databases. - * A target database allows Drupal to try to send certain queries to a - * different database if it can but fall back to the default connection if not. - * That is useful for primary/replica replication, as Drupal may try to connect - * to a replica server when appropriate and if one is not available will simply - * fall back to the single primary server (The terms primary/replica are - * traditionally referred to as master/slave in database server documentation). - * - * The general format for the $databases array is as follows: - * @code - * $databases['default']['default'] = $info_array; - * $databases['default']['replica'][] = $info_array; - * $databases['default']['replica'][] = $info_array; - * $databases['extra']['default'] = $info_array; - * @endcode - * - * In the above example, $info_array is an array of settings described above. - * The first line sets a "default" database that has one primary database - * (the second level default). The second and third lines create an array - * of potential replica databases. Drupal will select one at random for a given - * request as needed. The fourth line creates a new database with a name of - * "extra". - * - * You can optionally set prefixes for some or all database table names - * by using the 'prefix' setting. If a prefix is specified, the table - * name will be prepended with its value. Be sure to use valid database - * characters only, usually alphanumeric and underscore. If no prefixes - * are desired, leave it as an empty string ''. - * - * To have all database names prefixed, set 'prefix' as a string: - * @code - * 'prefix' => 'main_', - * @endcode - * - * Per-table prefixes are deprecated as of Drupal 8.2, and will be removed in - * Drupal 9.0. After that, only a single prefix for all tables will be - * supported. - * - * To provide prefixes for specific tables, set 'prefix' as an array. - * The array's keys are the table names and the values are the prefixes. - * The 'default' element is mandatory and holds the prefix for any tables - * not specified elsewhere in the array. Example: - * @code - * 'prefix' => array( - * 'default' => 'main_', - * 'users' => 'shared_', - * 'sessions' => 'shared_', - * 'role' => 'shared_', - * 'authmap' => 'shared_', - * ), - * @endcode - * You can also use a reference to a schema/database as a prefix. This may be - * useful if your Drupal installation exists in a schema that is not the default - * or you want to access several databases from the same code base at the same - * time. - * Example: - * @code - * 'prefix' => array( - * 'default' => 'main.', - * 'users' => 'shared.', - * 'sessions' => 'shared.', - * 'role' => 'shared.', - * 'authmap' => 'shared.', - * ); - * @endcode - * NOTE: MySQL and SQLite's definition of a schema is a database. - * - * Advanced users can add or override initial commands to execute when - * connecting to the database server, as well as PDO connection settings. For - * example, to enable MySQL SELECT queries to exceed the max_join_size system - * variable, and to reduce the database connection timeout to 5 seconds: - * @code - * $databases['default']['default'] = array( - * 'init_commands' => array( - * 'big_selects' => 'SET SQL_BIG_SELECTS=1', - * ), - * 'pdo' => array( - * PDO::ATTR_TIMEOUT => 5, - * ), - * ); - * @endcode - * - * WARNING: The above defaults are designed for database portability. Changing - * them may cause unexpected behavior, including potential data loss. See - * https://www.drupal.org/developing/api/database/configuration for more - * information on these defaults and the potential issues. - * - * More details can be found in the constructor methods for each driver: - * - \Drupal\Core\Database\Driver\mysql\Connection::__construct() - * - \Drupal\Core\Database\Driver\pgsql\Connection::__construct() - * - \Drupal\Core\Database\Driver\sqlite\Connection::__construct() - * - * Sample Database configuration format for PostgreSQL (pgsql): - * @code - * $databases['default']['default'] = array( - * 'driver' => 'pgsql', - * 'database' => 'databasename', - * 'username' => 'sqlusername', - * 'password' => 'sqlpassword', - * 'host' => 'localhost', - * 'prefix' => '', - * ); - * @endcode - * - * Sample Database configuration format for SQLite (sqlite): - * @code - * $databases['default']['default'] = array( - * 'driver' => 'sqlite', - * 'database' => '/path/to/databasefilename', - * ); - * @endcode - */ - -/** - * Location of the site configuration files. - * - * The $config_directories array specifies the location of file system - * directories used for configuration data. On install, the "sync" directory is - * created. This is used for configuration imports. The "active" directory is - * not created by default since the default storage for active configuration is - * the database rather than the file system. (This can be changed. See "Active - * configuration settings" below). - * - * The default location for the "sync" directory is inside a randomly-named - * directory in the public files path. The setting below allows you to override - * the "sync" location. - * - * If you use files for the "active" configuration, you can tell the - * Configuration system where this directory is located by adding an entry with - * array key CONFIG_ACTIVE_DIRECTORY. - * - * Example: - * @code - * $config_directories = array( - * CONFIG_SYNC_DIRECTORY => '/directory/outside/webroot', - * ); - * @endcode - */ -$config_directories = array(); - -/** - * Settings: - * - * $settings contains environment-specific configuration, such as the files - * directory and reverse proxy address, and temporary configuration, such as - * security overrides. - * - * @see \Drupal\Core\Site\Settings::get() - */ - -/** - * The active installation profile. - * - * Changing this after installation is not recommended as it changes which - * directories are scanned during extension discovery. If this is set prior to - * installation this value will be rewritten according to the profile selected - * by the user. - * - * @see install_select_profile() - * - * @deprecated in Drupal 8.3.0 and will be removed before Drupal 9.0.0. The - * install profile is written to the core.extension configuration. If a - * service requires the install profile use the 'install_profile' container - * parameter. Functional code can use \Drupal::installProfile(). - */ -# $settings['install_profile'] = ''; - -/** - * Salt for one-time login links, cancel links, form tokens, etc. - * - * This variable will be set to a random value by the installer. All one-time - * login links will be invalidated if the value is changed. Note that if your - * site is deployed on a cluster of web servers, you must ensure that this - * variable has the same value on each server. - * - * For enhanced security, you may set this variable to the contents of a file - * outside your document root; you should also ensure that this file is not - * stored with backups of your database. - * - * Example: - * @code - * $settings['hash_salt'] = file_get_contents('/home/example/salt.txt'); - * @endcode - */ -$settings['hash_salt'] = ''; - -/** - * Deployment identifier. - * - * Drupal's dependency injection container will be automatically invalidated and - * rebuilt when the Drupal core version changes. When updating contributed or - * custom code that changes the container, changing this identifier will also - * allow the container to be invalidated as soon as code is deployed. - */ -# $settings['deployment_identifier'] = \Drupal::VERSION; - -/** - * Access control for update.php script. - * - * If you are updating your Drupal installation using the update.php script but - * are not logged in using either an account with the "Administer software - * updates" permission or the site maintenance account (the account that was - * created during installation), you will need to modify the access check - * statement below. Change the FALSE to a TRUE to disable the access check. - * After finishing the upgrade, be sure to open this file again and change the - * TRUE back to a FALSE! - */ -$settings['update_free_access'] = FALSE; - -/** - * External access proxy settings: - * - * If your site must access the Internet via a web proxy then you can enter the - * proxy settings here. Set the full URL of the proxy, including the port, in - * variables: - * - $settings['http_client_config']['proxy']['http']: The proxy URL for HTTP - * requests. - * - $settings['http_client_config']['proxy']['https']: The proxy URL for HTTPS - * requests. - * You can pass in the user name and password for basic authentication in the - * URLs in these settings. - * - * You can also define an array of host names that can be accessed directly, - * bypassing the proxy, in $settings['http_client_config']['proxy']['no']. - */ -# $settings['http_client_config']['proxy']['http'] = 'http://proxy_user:proxy_pass@example.com:8080'; -# $settings['http_client_config']['proxy']['https'] = 'http://proxy_user:proxy_pass@example.com:8080'; -# $settings['http_client_config']['proxy']['no'] = ['127.0.0.1', 'localhost']; - -/** - * Reverse Proxy Configuration: - * - * Reverse proxy servers are often used to enhance the performance - * of heavily visited sites and may also provide other site caching, - * security, or encryption benefits. In an environment where Drupal - * is behind a reverse proxy, the real IP address of the client should - * be determined such that the correct client IP address is available - * to Drupal's logging, statistics, and access management systems. In - * the most simple scenario, the proxy server will add an - * X-Forwarded-For header to the request that contains the client IP - * address. However, HTTP headers are vulnerable to spoofing, where a - * malicious client could bypass restrictions by setting the - * X-Forwarded-For header directly. Therefore, Drupal's proxy - * configuration requires the IP addresses of all remote proxies to be - * specified in $settings['reverse_proxy_addresses'] to work correctly. - * - * Enable this setting to get Drupal to determine the client IP from - * the X-Forwarded-For header (or $settings['reverse_proxy_header'] if set). - * If you are unsure about this setting, do not have a reverse proxy, - * or Drupal operates in a shared hosting environment, this setting - * should remain commented out. - * - * In order for this setting to be used you must specify every possible - * reverse proxy IP address in $settings['reverse_proxy_addresses']. - * If a complete list of reverse proxies is not available in your - * environment (for example, if you use a CDN) you may set the - * $_SERVER['REMOTE_ADDR'] variable directly in settings.php. - * Be aware, however, that it is likely that this would allow IP - * address spoofing unless more advanced precautions are taken. - */ -# $settings['reverse_proxy'] = TRUE; - -/** - * Specify every reverse proxy IP address in your environment. - * This setting is required if $settings['reverse_proxy'] is TRUE. - */ -# $settings['reverse_proxy_addresses'] = array('a.b.c.d', ...); - -/** - * Set this value if your proxy server sends the client IP in a header - * other than X-Forwarded-For. - */ -# $settings['reverse_proxy_header'] = 'X_CLUSTER_CLIENT_IP'; - -/** - * Set this value if your proxy server sends the client protocol in a header - * other than X-Forwarded-Proto. - */ -# $settings['reverse_proxy_proto_header'] = 'X_FORWARDED_PROTO'; - -/** - * Set this value if your proxy server sends the client protocol in a header - * other than X-Forwarded-Host. - */ -# $settings['reverse_proxy_host_header'] = 'X_FORWARDED_HOST'; - -/** - * Set this value if your proxy server sends the client protocol in a header - * other than X-Forwarded-Port. - */ -# $settings['reverse_proxy_port_header'] = 'X_FORWARDED_PORT'; - -/** - * Set this value if your proxy server sends the client protocol in a header - * other than Forwarded. - */ -# $settings['reverse_proxy_forwarded_header'] = 'FORWARDED'; - -/** - * Page caching: - * - * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page - * views. This tells a HTTP proxy that it may return a page from its local - * cache without contacting the web server, if the user sends the same Cookie - * header as the user who originally requested the cached page. Without "Vary: - * Cookie", authenticated users would also be served the anonymous page from - * the cache. If the site has mostly anonymous users except a few known - * editors/administrators, the Vary header can be omitted. This allows for - * better caching in HTTP proxies (including reverse proxies), i.e. even if - * clients send different cookies, they still get content served from the cache. - * However, authenticated users should access the site directly (i.e. not use an - * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid - * getting cached pages from the proxy. - */ -# $settings['omit_vary_cookie'] = TRUE; - - -/** - * Cache TTL for client error (4xx) responses. - * - * Items cached per-URL tend to result in a large number of cache items, and - * this can be problematic on 404 pages which by their nature are unbounded. A - * fixed TTL can be set for these items, defaulting to one hour, so that cache - * backends which do not support LRU can purge older entries. To disable caching - * of client error responses set the value to 0. Currently applies only to - * page_cache module. - */ -# $settings['cache_ttl_4xx'] = 3600; - -/** - * Expiration of cached forms. - * - * Drupal's Form API stores details of forms in a cache and these entries are - * kept for at least 6 hours by default. Expired entries are cleared by cron. - * - * @see \Drupal\Core\Form\FormCache::setCache() - */ -# $settings['form_cache_expiration'] = 21600; - -/** - * Class Loader. - * - * If the APC extension is detected, the Symfony APC class loader is used for - * performance reasons. Detection can be prevented by setting - * class_loader_auto_detect to false, as in the example below. - */ -# $settings['class_loader_auto_detect'] = FALSE; - -/* - * If the APC extension is not detected, either because APC is missing or - * because auto-detection has been disabled, auto-loading falls back to - * Composer's ClassLoader, which is good for development as it does not break - * when code is moved in the file system. You can also decorate the base class - * loader with another cached solution than the Symfony APC class loader, as - * all production sites should have a cached class loader of some sort enabled. - * - * To do so, you may decorate and replace the local $class_loader variable. For - * example, to use Symfony's APC class loader without automatic detection, - * uncomment the code below. - */ -/* -if ($settings['hash_salt']) { - $prefix = 'drupal.' . hash('sha256', 'drupal.' . $settings['hash_salt']); - $apc_loader = new \Symfony\Component\ClassLoader\ApcClassLoader($prefix, $class_loader); - unset($prefix); - $class_loader->unregister(); - $apc_loader->register(); - $class_loader = $apc_loader; -} -*/ - -/** - * Authorized file system operations: - * - * The Update Manager module included with Drupal provides a mechanism for - * site administrators to securely install missing updates for the site - * directly through the web user interface. On securely-configured servers, - * the Update manager will require the administrator to provide SSH or FTP - * credentials before allowing the installation to proceed; this allows the - * site to update the new files as the user who owns all the Drupal files, - * instead of as the user the webserver is running as. On servers where the - * webserver user is itself the owner of the Drupal files, the administrator - * will not be prompted for SSH or FTP credentials (note that these server - * setups are common on shared hosting, but are inherently insecure). - * - * Some sites might wish to disable the above functionality, and only update - * the code directly via SSH or FTP themselves. This setting completely - * disables all functionality related to these authorized file operations. - * - * @see https://www.drupal.org/node/244924 - * - * Remove the leading hash signs to disable. - */ -# $settings['allow_authorize_operations'] = FALSE; - -/** - * Default mode for directories and files written by Drupal. - * - * Value should be in PHP Octal Notation, with leading zero. - */ -# $settings['file_chmod_directory'] = 0775; -# $settings['file_chmod_file'] = 0664; - -/** - * Public file base URL: - * - * An alternative base URL to be used for serving public files. This must - * include any leading directory path. - * - * A different value from the domain used by Drupal to be used for accessing - * public files. This can be used for a simple CDN integration, or to improve - * security by serving user-uploaded files from a different domain or subdomain - * pointing to the same server. Do not include a trailing slash. - */ -# $settings['file_public_base_url'] = 'http://downloads.example.com/files'; - -/** - * Public file path: - * - * A local file system path where public files will be stored. This directory - * must exist and be writable by Drupal. This directory must be relative to - * the Drupal installation directory and be accessible over the web. - */ -# $settings['file_public_path'] = 'sites/default/files'; - -/** - * Private file path: - * - * A local file system path where private files will be stored. This directory - * must be absolute, outside of the Drupal installation directory and not - * accessible over the web. - * - * Note: Caches need to be cleared when this value is changed to make the - * private:// stream wrapper available to the system. - * - * See https://www.drupal.org/documentation/modules/file for more information - * about securing private files. - */ -# $settings['file_private_path'] = ''; - -/** - * Session write interval: - * - * Set the minimum interval between each session write to database. - * For performance reasons it defaults to 180. - */ -# $settings['session_write_interval'] = 180; - -/** - * String overrides: - * - * To override specific strings on your site with or without enabling the Locale - * module, add an entry to this list. This functionality allows you to change - * a small number of your site's default English language interface strings. - * - * Remove the leading hash signs to enable. - * - * The "en" part of the variable name, is dynamic and can be any langcode of - * any added language. (eg locale_custom_strings_de for german). - */ -# $settings['locale_custom_strings_en'][''] = array( -# 'forum' => 'Discussion board', -# '@count min' => '@count minutes', -# ); - -/** - * A custom theme for the offline page: - * - * This applies when the site is explicitly set to maintenance mode through the - * administration page or when the database is inactive due to an error. - * The template file should also be copied into the theme. It is located inside - * 'core/modules/system/templates/maintenance-page.html.twig'. - * - * Note: This setting does not apply to installation and update pages. - */ -# $settings['maintenance_theme'] = 'bartik'; - -/** - * PHP settings: - * - * To see what PHP settings are possible, including whether they can be set at - * runtime (by using ini_set()), read the PHP documentation: - * http://php.net/manual/ini.list.php - * See \Drupal\Core\DrupalKernel::bootEnvironment() for required runtime - * settings and the .htaccess file for non-runtime settings. - * Settings defined there should not be duplicated here so as to avoid conflict - * issues. - */ - -/** - * If you encounter a situation where users post a large amount of text, and - * the result is stripped out upon viewing but can still be edited, Drupal's - * output filter may not have sufficient memory to process it. If you - * experience this issue, you may wish to uncomment the following two lines - * and increase the limits of these variables. For more information, see - * http://php.net/manual/pcre.configuration.php. - */ -# ini_set('pcre.backtrack_limit', 200000); -# ini_set('pcre.recursion_limit', 200000); - -/** - * Active configuration settings. - * - * By default, the active configuration is stored in the database in the - * {config} table. To use a different storage mechanism for the active - * configuration, do the following prior to installing: - * - Create an "active" directory and declare its path in $config_directories - * as explained under the 'Location of the site configuration files' section - * above in this file. To enhance security, you can declare a path that is - * outside your document root. - * - Override the 'bootstrap_config_storage' setting here. It must be set to a - * callable that returns an object that implements - * \Drupal\Core\Config\StorageInterface. - * - Override the service definition 'config.storage.active'. Put this - * override in a services.yml file in the same directory as settings.php - * (definitions in this file will override service definition defaults). - */ -# $settings['bootstrap_config_storage'] = array('Drupal\Core\Config\BootstrapConfigStorageFactory', 'getFileStorage'); - -/** - * Configuration overrides. - * - * To globally override specific configuration values for this site, - * set them here. You usually don't need to use this feature. This is - * useful in a configuration file for a vhost or directory, rather than - * the default settings.php. - * - * Note that any values you provide in these variable overrides will not be - * viewable from the Drupal administration interface. The administration - * interface displays the values stored in configuration so that you can stage - * changes to other environments that don't have the overrides. - * - * There are particular configuration values that are risky to override. For - * example, overriding the list of installed modules in 'core.extension' is not - * supported as module install or uninstall has not occurred. Other examples - * include field storage configuration, because it has effects on database - * structure, and 'core.menu.static_menu_link_overrides' since this is cached in - * a way that is not config override aware. Also, note that changing - * configuration values in settings.php will not fire any of the configuration - * change events. - */ -# $config['system.file']['path']['temporary'] = '/tmp'; -# $config['system.site']['name'] = 'My Drupal site'; -# $config['system.theme']['default'] = 'stark'; -# $config['user.settings']['anonymous'] = 'Visitor'; - -/** - * Fast 404 pages: - * - * Drupal can generate fully themed 404 pages. However, some of these responses - * are for images or other resource files that are not displayed to the user. - * This can waste bandwidth, and also generate server load. - * - * The options below return a simple, fast 404 page for URLs matching a - * specific pattern: - * - $config['system.performance']['fast_404']['exclude_paths']: A regular - * expression to match paths to exclude, such as images generated by image - * styles, or dynamically-resized images. The default pattern provided below - * also excludes the private file system. If you need to add more paths, you - * can add '|path' to the expression. - * - $config['system.performance']['fast_404']['paths']: A regular expression to - * match paths that should return a simple 404 page, rather than the fully - * themed 404 page. If you don't have any aliases ending in htm or html you - * can add '|s?html?' to the expression. - * - $config['system.performance']['fast_404']['html']: The html to return for - * simple 404 pages. - * - * Remove the leading hash signs if you would like to alter this functionality. - */ -# $config['system.performance']['fast_404']['exclude_paths'] = '/\/(?:styles)|(?:system\/files)\//'; -# $config['system.performance']['fast_404']['paths'] = '/\.(?:txt|png|gif|jpe?g|css|js|ico|swf|flv|cgi|bat|pl|dll|exe|asp)$/i'; -# $config['system.performance']['fast_404']['html'] = '<!DOCTYPE html><html><head><title>404 Not Found</title></head><body><h1>Not Found</h1><p>The requested URL "@path" was not found on this server.</p></body></html>'; - -/** - * Load services definition file. - */ -$settings['container_yamls'][] = $app_root . '/' . $site_path . '/services.yml'; - -/** - * Override the default service container class. - * - * This is useful for example to trace the service container for performance - * tracking purposes, for testing a service container with an error condition or - * to test a service container that throws an exception. - */ -# $settings['container_base_class'] = '\Drupal\Core\DependencyInjection\Container'; - -/** - * Override the default yaml parser class. - * - * Provide a fully qualified class name here if you would like to provide an - * alternate implementation YAML parser. The class must implement the - * \Drupal\Component\Serialization\SerializationInterface interface. - */ -# $settings['yaml_parser_class'] = NULL; - -/** - * Trusted host configuration. - * - * Drupal core can use the Symfony trusted host mechanism to prevent HTTP Host - * header spoofing. - * - * To enable the trusted host mechanism, you enable your allowable hosts - * in $settings['trusted_host_patterns']. This should be an array of regular - * expression patterns, without delimiters, representing the hosts you would - * like to allow. - * - * For example: - * @code - * $settings['trusted_host_patterns'] = array( - * '^www\.example\.com$', - * ); - * @endcode - * will allow the site to only run from www.example.com. - * - * If you are running multisite, or if you are running your site from - * different domain names (eg, you don't redirect http://www.example.com to - * http://example.com), you should specify all of the host patterns that are - * allowed by your site. - * - * For example: - * @code - * $settings['trusted_host_patterns'] = array( - * '^example\.com$', - * '^.+\.example\.com$', - * '^example\.org$', - * '^.+\.example\.org$', - * ); - * @endcode - * will allow the site to run off of all variants of example.com and - * example.org, with all subdomains included. - */ - -/** - * The default list of directories that will be ignored by Drupal's file API. - * - * By default ignore node_modules and bower_components folders to avoid issues - * with common frontend tools and recursive scanning of directories looking for - * extensions. - * - * @see file_scan_directory() - * @see \Drupal\Core\Extension\ExtensionDiscovery::scanDirectory() - */ -$settings['file_scan_ignore_directories'] = [ - 'node_modules', - 'bower_components', - 'puppet', -]; - -/** - * The default number of entities to update in a batch process. - * - * This is used by update and post-update functions that need to go through and - * change all the entities on a site, so it is useful to increase this number - * if your hosting configuration (i.e. RAM allocation, CPU speed) allows for a - * larger number of entities to be processed in a single batch run. - */ -$settings['entity_update_batch_size'] = 50; - -/** - * Basic config set by templater - https://templater.fluxo.info - */ -$databases['default']['default'] = array ( - 'database' => 'drupal', - 'username' => 'drupal', - 'password' => 'hackme', - 'host' => 'localhost', - 'port' => '3306', - 'driver' => 'mysql', - 'prefix' => '', - 'collation' => 'utf8mb4_general_ci', -); -$settings['install_profile'] = 'standard'; -$config_directories['sync'] = 'sites/default/config/sync'; -$settings['trusted_host_patterns'] = array( - '^localhost$', -); - -/** - * Load local development override configuration, if available. - * - * Use settings.local.php to override variables on secondary (staging, - * development, etc) installations of this site. Typically used to disable - * caching, JavaScript/CSS compression, re-routing of outgoing emails, and - * other things that should not happen on development and testing sites. - * - * Keep this code block at the end of this file to take full effect. - */ -if (file_exists($app_root . '/' . $site_path . '/settings.local.php')) { - include $app_root . '/' . $site_path . '/settings.local.php'; -} |