aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--share/drupal8/Makefile15
-rw-r--r--share/drupal8/default.services.yml174
-rw-r--r--share/drupal8/default.settings.php785
-rw-r--r--share/drupal8/development.services.yml9
-rw-r--r--share/drupal8/example.settings.local.php115
-rw-r--r--share/drupal8/example.sites.php55
-rwxr-xr-xtemplater22
7 files changed, 1168 insertions, 7 deletions
diff --git a/share/drupal8/Makefile b/share/drupal8/Makefile
index dec93d3..3b005a9 100644
--- a/share/drupal8/Makefile
+++ b/share/drupal8/Makefile
@@ -8,7 +8,8 @@ PROJECT = drupal
ENV = dev
DATE = $(shell date +%Y%m%d)
CWD = $(shell pwd)
-DESTDIR ?= vendor
+#DESTDIR ?= vendor
+DESTDIR ?= /var/www/data
DRUPAL = $(DESTDIR)/drupal-$(CORE)
DRUSH = drush -r $(DRUPAL) -l $(PROJECT)
@@ -18,9 +19,10 @@ production: submodules post_receive drush settings ownership
# Setup a development environment
#develop: submodules vagrant
develop: submodules kvmx
- rm -rf $(DRUPAL)/sites/default
- ln -s $(PROJECT) $(DRUPAL)/sites/default
- vagrant ssh -c "$(DRUSH) pm-enable devel -y"
+ #rm -rf $(DRUPAL)/sites/default
+ #ln -s $(PROJECT) $(DRUPAL)/sites/default
+ #vagrant ssh -c "$(DRUSH) pm-enable devel -y"
+ kvmx ssh "$(DRUSH) pm-enable devel -y"
# Install the platform
platform: drupal drush settings symlinks initdb cache
@@ -40,6 +42,7 @@ vagrant:
# Setup the virtual machine using kvmx
kvmx:
kvmx up
+ kvmx provision
# Download drupal, setup folder structure and config file
#
@@ -49,7 +52,7 @@ drupal:
#rm -rf $(DESTDIR)/drupal-$(CORE)* && drush pm-download -y -v drupal-$(CORE) --destination=/tmp/drupal && mv /tmp/drupal/drupal-$(CORE).* $(DESTDIR)/
#drush pm-download -y -v drupal-$(CORE) --destination=$(DESTDIR)
#( cd $(DRUPAL)/.. && ln -s drupal-$(CORE).* drupal-$(CORE) )
- BASE=$(DESTDIR) drupal download 8
+ BASE=$(DESTDIR) drupal download $(CORE)
# Make the needed symlinks
symlinks:
@@ -144,7 +147,7 @@ upgrade-modules:
# Upgrade drupal
upgrade-drupal:
- BASE=$(DESTDIR) drupal upgrade $(OLD) $(NEW)
+ BASE=$(DESTDIR) drupal upgrade $(CORE)
# Configure update hook on remote host
post_receive:
diff --git a/share/drupal8/default.services.yml b/share/drupal8/default.services.yml
new file mode 100644
index 0000000..e1bbbc7
--- /dev/null
+++ b/share/drupal8/default.services.yml
@@ -0,0 +1,174 @@
+parameters:
+ session.storage.options:
+ # Default ini options for sessions.
+ #
+ # Some distributions of Linux (most notably Debian) ship their PHP
+ # installations with garbage collection (gc) disabled. Since Drupal depends
+ # on PHP's garbage collection for clearing sessions, ensure that garbage
+ # collection occurs by using the most common settings.
+ # @default 1
+ gc_probability: 1
+ # @default 100
+ gc_divisor: 100
+ #
+ # Set session lifetime (in seconds), i.e. the time from the user's last
+ # visit to the active session may be deleted by the session garbage
+ # collector. When a session is deleted, authenticated users are logged out,
+ # and the contents of the user's $_SESSION variable is discarded.
+ # @default 200000
+ gc_maxlifetime: 200000
+ #
+ # Set session cookie lifetime (in seconds), i.e. the time from the session
+ # is created to the cookie expires, i.e. when the browser is expected to
+ # discard the cookie. The value 0 means "until the browser is closed".
+ # @default 2000000
+ cookie_lifetime: 2000000
+ #
+ # Drupal automatically generates a unique session cookie name based on the
+ # full domain name used to access the site. This mechanism is sufficient
+ # for most use-cases, including multi-site deployments. However, if it is
+ # desired that a session can be reused across different subdomains, the
+ # cookie domain needs to be set to the shared base domain. Doing so assures
+ # that users remain logged in as they cross between various subdomains.
+ # To maximize compatibility and normalize the behavior across user agents,
+ # the cookie domain should start with a dot.
+ #
+ # @default none
+ # cookie_domain: '.example.com'
+ #
+ twig.config:
+ # Twig debugging:
+ #
+ # When debugging is enabled:
+ # - The markup of each Twig template is surrounded by HTML comments that
+ # contain theming information, such as template file name suggestions.
+ # - Note that this debugging markup will cause automated tests that directly
+ # check rendered HTML to fail. When running automated tests, 'debug'
+ # should be set to FALSE.
+ # - The dump() function can be used in Twig templates to output information
+ # about template variables.
+ # - Twig templates are automatically recompiled whenever the source code
+ # changes (see auto_reload below).
+ #
+ # For more information about debugging Twig templates, see
+ # https://www.drupal.org/node/1906392.
+ #
+ # Not recommended in production environments
+ # @default false
+ debug: false
+ # Twig auto-reload:
+ #
+ # Automatically recompile Twig templates whenever the source code changes.
+ # If you don't provide a value for auto_reload, it will be determined
+ # based on the value of debug.
+ #
+ # Not recommended in production environments
+ # @default null
+ auto_reload: null
+ # Twig cache:
+ #
+ # By default, Twig templates will be compiled and stored in the filesystem
+ # to increase performance. Disabling the Twig cache will recompile the
+ # templates from source each time they are used. In most cases the
+ # auto_reload setting above should be enabled rather than disabling the
+ # Twig cache.
+ #
+ # Not recommended in production environments
+ # @default true
+ cache: true
+ renderer.config:
+ # Renderer required cache contexts:
+ #
+ # The Renderer will automatically associate these cache contexts with every
+ # render array, hence varying every render array by these cache contexts.
+ #
+ # @default ['languages:language_interface', 'theme', 'user.permissions']
+ required_cache_contexts: ['languages:language_interface', 'theme', 'user.permissions']
+ # Renderer automatic placeholdering conditions:
+ #
+ # Drupal allows portions of the page to be automatically deferred when
+ # rendering to improve cache performance. That is especially helpful for
+ # cache contexts that vary widely, such as the active user. On some sites
+ # those may be different, however, such as sites with only a handful of
+ # users. If you know what the high-cardinality cache contexts are for your
+ # site, specify those here. If you're not sure, the defaults are fairly safe
+ # in general.
+ #
+ # For more information about rendering optimizations see
+ # https://www.drupal.org/developing/api/8/render/arrays/cacheability#optimizing
+ auto_placeholder_conditions:
+ # Max-age at or below which caching is not considered worthwhile.
+ #
+ # Disable by setting to -1.
+ #
+ # @default 0
+ max-age: 0
+ # Cache contexts with a high cardinality.
+ #
+ # Disable by setting to [].
+ #
+ # @default ['session', 'user']
+ contexts: ['session', 'user']
+ # Tags with a high invalidation frequency.
+ #
+ # Disable by setting to [].
+ #
+ # @default []
+ tags: []
+ # Cacheability debugging:
+ #
+ # Responses with cacheability metadata (CacheableResponseInterface instances)
+ # get X-Drupal-Cache-Tags and X-Drupal-Cache-Contexts headers.
+ #
+ # For more information about debugging cacheable responses, see
+ # https://www.drupal.org/developing/api/8/response/cacheable-response-interface
+ #
+ # Not recommended in production environments
+ # @default false
+ http.response.debug_cacheability_headers: false
+ factory.keyvalue:
+ {}
+ # Default key/value storage service to use.
+ # @default keyvalue.database
+ # default: keyvalue.database
+ # Collection-specific overrides.
+ # state: keyvalue.database
+ factory.keyvalue.expirable:
+ {}
+ # Default key/value expirable storage service to use.
+ # @default keyvalue.database.expirable
+ # default: keyvalue.database.expirable
+ # Allowed protocols for URL generation.
+ filter_protocols:
+ - http
+ - https
+ - ftp
+ - news
+ - nntp
+ - tel
+ - telnet
+ - mailto
+ - irc
+ - ssh
+ - sftp
+ - webcal
+ - rtsp
+
+ # Configure Cross-Site HTTP requests (CORS).
+ # Read https://developer.mozilla.org/en-US/docs/Web/HTTP/Access_control_CORS
+ # for more information about the topic in general.
+ # Note: By default the configuration is disabled.
+ cors.config:
+ enabled: false
+ # Specify allowed headers, like 'x-allowed-header'.
+ allowedHeaders: []
+ # Specify allowed request methods, specify ['*'] to allow all possible ones.
+ allowedMethods: []
+ # Configure requests allowed from specific origins.
+ allowedOrigins: ['*']
+ # Sets the Access-Control-Expose-Headers header.
+ exposedHeaders: false
+ # Sets the Access-Control-Max-Age header.
+ maxAge: false
+ # Sets the Access-Control-Allow-Credentials header.
+ supportsCredentials: false
diff --git a/share/drupal8/default.settings.php b/share/drupal8/default.settings.php
new file mode 100644
index 0000000..c7dd194
--- /dev/null
+++ b/share/drupal8/default.settings.php
@@ -0,0 +1,785 @@
+<?php
+
+/**
+ * @file
+ * Drupal site-specific configuration file.
+ *
+ * IMPORTANT NOTE:
+ * This file may have been set to read-only by the Drupal installation program.
+ * If you make changes to this file, be sure to protect it again after making
+ * your modifications. Failure to remove write permissions to this file is a
+ * security risk.
+ *
+ * In order to use the selection rules below the multisite aliasing file named
+ * sites/sites.php must be present. Its optional settings will be loaded, and
+ * the aliases in the array $sites will override the default directory rules
+ * below. See sites/example.sites.php for more information about aliases.
+ *
+ * The configuration directory will be discovered by stripping the website's
+ * hostname from left to right and pathname from right to left. The first
+ * configuration file found will be used and any others will be ignored. If no
+ * other configuration file is found then the default configuration file at
+ * 'sites/default' will be used.
+ *
+ * For example, for a fictitious site installed at
+ * https://www.drupal.org:8080/mysite/test/, the 'settings.php' file is searched
+ * for in the following directories:
+ *
+ * - sites/8080.www.drupal.org.mysite.test
+ * - sites/www.drupal.org.mysite.test
+ * - sites/drupal.org.mysite.test
+ * - sites/org.mysite.test
+ *
+ * - sites/8080.www.drupal.org.mysite
+ * - sites/www.drupal.org.mysite
+ * - sites/drupal.org.mysite
+ * - sites/org.mysite
+ *
+ * - sites/8080.www.drupal.org
+ * - sites/www.drupal.org
+ * - sites/drupal.org
+ * - sites/org
+ *
+ * - sites/default
+ *
+ * Note that if you are installing on a non-standard port number, prefix the
+ * hostname with that number. For example,
+ * https://www.drupal.org:8080/mysite/test/ could be loaded from
+ * sites/8080.www.drupal.org.mysite.test/.
+ *
+ * @see example.sites.php
+ * @see \Drupal\Core\DrupalKernel::getSitePath()
+ *
+ * In addition to customizing application settings through variables in
+ * settings.php, you can create a services.yml file in the same directory to
+ * register custom, site-specific service definitions and/or swap out default
+ * implementations with custom ones.
+ */
+
+/**
+ * Database settings:
+ *
+ * The $databases array specifies the database connection or
+ * connections that Drupal may use. Drupal is able to connect
+ * to multiple databases, including multiple types of databases,
+ * during the same request.
+ *
+ * One example of the simplest connection array is shown below. To use the
+ * sample settings, copy and uncomment the code below between the @code and
+ * @endcode lines and paste it after the $databases declaration. You will need
+ * to replace the database username and password and possibly the host and port
+ * with the appropriate credentials for your database system.
+ *
+ * The next section describes how to customize the $databases array for more
+ * specific needs.
+ *
+ * @code
+ * $databases['default']['default'] = array (
+ * 'database' => 'databasename',
+ * 'username' => 'sqlusername',
+ * 'password' => 'sqlpassword',
+ * 'host' => 'localhost',
+ * 'port' => '3306',
+ * 'driver' => 'mysql',
+ * 'prefix' => '',
+ * 'collation' => 'utf8mb4_general_ci',
+ * );
+ * @endcode
+ */
+$databases = array();
+
+/**
+ * Customizing database settings.
+ *
+ * Many of the values of the $databases array can be customized for your
+ * particular database system. Refer to the sample in the section above as a
+ * starting point.
+ *
+ * The "driver" property indicates what Drupal database driver the
+ * connection should use. This is usually the same as the name of the
+ * database type, such as mysql or sqlite, but not always. The other
+ * properties will vary depending on the driver. For SQLite, you must
+ * specify a database file name in a directory that is writable by the
+ * webserver. For most other drivers, you must specify a
+ * username, password, host, and database name.
+ *
+ * Transaction support is enabled by default for all drivers that support it,
+ * including MySQL. To explicitly disable it, set the 'transactions' key to
+ * FALSE.
+ * Note that some configurations of MySQL, such as the MyISAM engine, don't
+ * support it and will proceed silently even if enabled. If you experience
+ * transaction related crashes with such configuration, set the 'transactions'
+ * key to FALSE.
+ *
+ * For each database, you may optionally specify multiple "target" databases.
+ * A target database allows Drupal to try to send certain queries to a
+ * different database if it can but fall back to the default connection if not.
+ * That is useful for primary/replica replication, as Drupal may try to connect
+ * to a replica server when appropriate and if one is not available will simply
+ * fall back to the single primary server (The terms primary/replica are
+ * traditionally referred to as master/slave in database server documentation).
+ *
+ * The general format for the $databases array is as follows:
+ * @code
+ * $databases['default']['default'] = $info_array;
+ * $databases['default']['replica'][] = $info_array;
+ * $databases['default']['replica'][] = $info_array;
+ * $databases['extra']['default'] = $info_array;
+ * @endcode
+ *
+ * In the above example, $info_array is an array of settings described above.
+ * The first line sets a "default" database that has one primary database
+ * (the second level default). The second and third lines create an array
+ * of potential replica databases. Drupal will select one at random for a given
+ * request as needed. The fourth line creates a new database with a name of
+ * "extra".
+ *
+ * You can optionally set prefixes for some or all database table names
+ * by using the 'prefix' setting. If a prefix is specified, the table
+ * name will be prepended with its value. Be sure to use valid database
+ * characters only, usually alphanumeric and underscore. If no prefixes
+ * are desired, leave it as an empty string ''.
+ *
+ * To have all database names prefixed, set 'prefix' as a string:
+ * @code
+ * 'prefix' => 'main_',
+ * @endcode
+ *
+ * Per-table prefixes are deprecated as of Drupal 8.2, and will be removed in
+ * Drupal 9.0. After that, only a single prefix for all tables will be
+ * supported.
+ *
+ * To provide prefixes for specific tables, set 'prefix' as an array.
+ * The array's keys are the table names and the values are the prefixes.
+ * The 'default' element is mandatory and holds the prefix for any tables
+ * not specified elsewhere in the array. Example:
+ * @code
+ * 'prefix' => array(
+ * 'default' => 'main_',
+ * 'users' => 'shared_',
+ * 'sessions' => 'shared_',
+ * 'role' => 'shared_',
+ * 'authmap' => 'shared_',
+ * ),
+ * @endcode
+ * You can also use a reference to a schema/database as a prefix. This may be
+ * useful if your Drupal installation exists in a schema that is not the default
+ * or you want to access several databases from the same code base at the same
+ * time.
+ * Example:
+ * @code
+ * 'prefix' => array(
+ * 'default' => 'main.',
+ * 'users' => 'shared.',
+ * 'sessions' => 'shared.',
+ * 'role' => 'shared.',
+ * 'authmap' => 'shared.',
+ * );
+ * @endcode
+ * NOTE: MySQL and SQLite's definition of a schema is a database.
+ *
+ * Advanced users can add or override initial commands to execute when
+ * connecting to the database server, as well as PDO connection settings. For
+ * example, to enable MySQL SELECT queries to exceed the max_join_size system
+ * variable, and to reduce the database connection timeout to 5 seconds:
+ * @code
+ * $databases['default']['default'] = array(
+ * 'init_commands' => array(
+ * 'big_selects' => 'SET SQL_BIG_SELECTS=1',
+ * ),
+ * 'pdo' => array(
+ * PDO::ATTR_TIMEOUT => 5,
+ * ),
+ * );
+ * @endcode
+ *
+ * WARNING: The above defaults are designed for database portability. Changing
+ * them may cause unexpected behavior, including potential data loss. See
+ * https://www.drupal.org/developing/api/database/configuration for more
+ * information on these defaults and the potential issues.
+ *
+ * More details can be found in the constructor methods for each driver:
+ * - \Drupal\Core\Database\Driver\mysql\Connection::__construct()
+ * - \Drupal\Core\Database\Driver\pgsql\Connection::__construct()
+ * - \Drupal\Core\Database\Driver\sqlite\Connection::__construct()
+ *
+ * Sample Database configuration format for PostgreSQL (pgsql):
+ * @code
+ * $databases['default']['default'] = array(
+ * 'driver' => 'pgsql',
+ * 'database' => 'databasename',
+ * 'username' => 'sqlusername',
+ * 'password' => 'sqlpassword',
+ * 'host' => 'localhost',
+ * 'prefix' => '',
+ * );
+ * @endcode
+ *
+ * Sample Database configuration format for SQLite (sqlite):
+ * @code
+ * $databases['default']['default'] = array(
+ * 'driver' => 'sqlite',
+ * 'database' => '/path/to/databasefilename',
+ * );
+ * @endcode
+ */
+
+/**
+ * Location of the site configuration files.
+ *
+ * The $config_directories array specifies the location of file system
+ * directories used for configuration data. On install, the "sync" directory is
+ * created. This is used for configuration imports. The "active" directory is
+ * not created by default since the default storage for active configuration is
+ * the database rather than the file system. (This can be changed. See "Active
+ * configuration settings" below).
+ *
+ * The default location for the "sync" directory is inside a randomly-named
+ * directory in the public files path. The setting below allows you to override
+ * the "sync" location.
+ *
+ * If you use files for the "active" configuration, you can tell the
+ * Configuration system where this directory is located by adding an entry with
+ * array key CONFIG_ACTIVE_DIRECTORY.
+ *
+ * Example:
+ * @code
+ * $config_directories = array(
+ * CONFIG_SYNC_DIRECTORY => '/directory/outside/webroot',
+ * );
+ * @endcode
+ */
+$config_directories = array();
+
+/**
+ * Settings:
+ *
+ * $settings contains environment-specific configuration, such as the files
+ * directory and reverse proxy address, and temporary configuration, such as
+ * security overrides.
+ *
+ * @see \Drupal\Core\Site\Settings::get()
+ */
+
+/**
+ * The active installation profile.
+ *
+ * Changing this after installation is not recommended as it changes which
+ * directories are scanned during extension discovery. If this is set prior to
+ * installation this value will be rewritten according to the profile selected
+ * by the user.
+ *
+ * @see install_select_profile()
+ *
+ * @deprecated in Drupal 8.3.0 and will be removed before Drupal 9.0.0. The
+ * install profile is written to the core.extension configuration. If a
+ * service requires the install profile use the 'install_profile' container
+ * parameter. Functional code can use \Drupal::installProfile().
+ */
+# $settings['install_profile'] = '';
+
+/**
+ * Salt for one-time login links, cancel links, form tokens, etc.
+ *
+ * This variable will be set to a random value by the installer. All one-time
+ * login links will be invalidated if the value is changed. Note that if your
+ * site is deployed on a cluster of web servers, you must ensure that this
+ * variable has the same value on each server.
+ *
+ * For enhanced security, you may set this variable to the contents of a file
+ * outside your document root; you should also ensure that this file is not
+ * stored with backups of your database.
+ *
+ * Example:
+ * @code
+ * $settings['hash_salt'] = file_get_contents('/home/example/salt.txt');
+ * @endcode
+ */
+$settings['hash_salt'] = '';
+
+/**
+ * Deployment identifier.
+ *
+ * Drupal's dependency injection container will be automatically invalidated and
+ * rebuilt when the Drupal core version changes. When updating contributed or
+ * custom code that changes the container, changing this identifier will also
+ * allow the container to be invalidated as soon as code is deployed.
+ */
+# $settings['deployment_identifier'] = \Drupal::VERSION;
+
+/**
+ * Access control for update.php script.
+ *
+ * If you are updating your Drupal installation using the update.php script but
+ * are not logged in using either an account with the "Administer software
+ * updates" permission or the site maintenance account (the account that was
+ * created during installation), you will need to modify the access check
+ * statement below. Change the FALSE to a TRUE to disable the access check.
+ * After finishing the upgrade, be sure to open this file again and change the
+ * TRUE back to a FALSE!
+ */
+$settings['update_free_access'] = FALSE;
+
+/**
+ * External access proxy settings:
+ *
+ * If your site must access the Internet via a web proxy then you can enter the
+ * proxy settings here. Set the full URL of the proxy, including the port, in
+ * variables:
+ * - $settings['http_client_config']['proxy']['http']: The proxy URL for HTTP
+ * requests.
+ * - $settings['http_client_config']['proxy']['https']: The proxy URL for HTTPS
+ * requests.
+ * You can pass in the user name and password for basic authentication in the
+ * URLs in these settings.
+ *
+ * You can also define an array of host names that can be accessed directly,
+ * bypassing the proxy, in $settings['http_client_config']['proxy']['no'].
+ */
+# $settings['http_client_config']['proxy']['http'] = 'http://proxy_user:proxy_pass@example.com:8080';
+# $settings['http_client_config']['proxy']['https'] = 'http://proxy_user:proxy_pass@example.com:8080';
+# $settings['http_client_config']['proxy']['no'] = ['127.0.0.1', 'localhost'];
+
+/**
+ * Reverse Proxy Configuration:
+ *
+ * Reverse proxy servers are often used to enhance the performance
+ * of heavily visited sites and may also provide other site caching,
+ * security, or encryption benefits. In an environment where Drupal
+ * is behind a reverse proxy, the real IP address of the client should
+ * be determined such that the correct client IP address is available
+ * to Drupal's logging, statistics, and access management systems. In
+ * the most simple scenario, the proxy server will add an
+ * X-Forwarded-For header to the request that contains the client IP
+ * address. However, HTTP headers are vulnerable to spoofing, where a
+ * malicious client could bypass restrictions by setting the
+ * X-Forwarded-For header directly. Therefore, Drupal's proxy
+ * configuration requires the IP addresses of all remote proxies to be
+ * specified in $settings['reverse_proxy_addresses'] to work correctly.
+ *
+ * Enable this setting to get Drupal to determine the client IP from
+ * the X-Forwarded-For header (or $settings['reverse_proxy_header'] if set).
+ * If you are unsure about this setting, do not have a reverse proxy,
+ * or Drupal operates in a shared hosting environment, this setting
+ * should remain commented out.
+ *
+ * In order for this setting to be used you must specify every possible
+ * reverse proxy IP address in $settings['reverse_proxy_addresses'].
+ * If a complete list of reverse proxies is not available in your
+ * environment (for example, if you use a CDN) you may set the
+ * $_SERVER['REMOTE_ADDR'] variable directly in settings.php.
+ * Be aware, however, that it is likely that this would allow IP
+ * address spoofing unless more advanced precautions are taken.
+ */
+# $settings['reverse_proxy'] = TRUE;
+
+/**
+ * Specify every reverse proxy IP address in your environment.
+ * This setting is required if $settings['reverse_proxy'] is TRUE.
+ */
+# $settings['reverse_proxy_addresses'] = array('a.b.c.d', ...);
+
+/**
+ * Set this value if your proxy server sends the client IP in a header
+ * other than X-Forwarded-For.
+ */
+# $settings['reverse_proxy_header'] = 'X_CLUSTER_CLIENT_IP';
+
+/**
+ * Set this value if your proxy server sends the client protocol in a header
+ * other than X-Forwarded-Proto.
+ */
+# $settings['reverse_proxy_proto_header'] = 'X_FORWARDED_PROTO';
+
+/**
+ * Set this value if your proxy server sends the client protocol in a header
+ * other than X-Forwarded-Host.
+ */
+# $settings['reverse_proxy_host_header'] = 'X_FORWARDED_HOST';
+
+/**
+ * Set this value if your proxy server sends the client protocol in a header
+ * other than X-Forwarded-Port.
+ */
+# $settings['reverse_proxy_port_header'] = 'X_FORWARDED_PORT';
+
+/**
+ * Set this value if your proxy server sends the client protocol in a header
+ * other than Forwarded.
+ */
+# $settings['reverse_proxy_forwarded_header'] = 'FORWARDED';
+
+/**
+ * Page caching:
+ *
+ * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page
+ * views. This tells a HTTP proxy that it may return a page from its local
+ * cache without contacting the web server, if the user sends the same Cookie
+ * header as the user who originally requested the cached page. Without "Vary:
+ * Cookie", authenticated users would also be served the anonymous page from
+ * the cache. If the site has mostly anonymous users except a few known
+ * editors/administrators, the Vary header can be omitted. This allows for
+ * better caching in HTTP proxies (including reverse proxies), i.e. even if
+ * clients send different cookies, they still get content served from the cache.
+ * However, authenticated users should access the site directly (i.e. not use an
+ * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid
+ * getting cached pages from the proxy.
+ */
+# $settings['omit_vary_cookie'] = TRUE;
+
+
+/**
+ * Cache TTL for client error (4xx) responses.
+ *
+ * Items cached per-URL tend to result in a large number of cache items, and
+ * this can be problematic on 404 pages which by their nature are unbounded. A
+ * fixed TTL can be set for these items, defaulting to one hour, so that cache
+ * backends which do not support LRU can purge older entries. To disable caching
+ * of client error responses set the value to 0. Currently applies only to
+ * page_cache module.
+ */
+# $settings['cache_ttl_4xx'] = 3600;
+
+/**
+ * Expiration of cached forms.
+ *
+ * Drupal's Form API stores details of forms in a cache and these entries are
+ * kept for at least 6 hours by default. Expired entries are cleared by cron.
+ *
+ * @see \Drupal\Core\Form\FormCache::setCache()
+ */
+# $settings['form_cache_expiration'] = 21600;
+
+/**
+ * Class Loader.
+ *
+ * If the APC extension is detected, the Symfony APC class loader is used for
+ * performance reasons. Detection can be prevented by setting
+ * class_loader_auto_detect to false, as in the example below.
+ */
+# $settings['class_loader_auto_detect'] = FALSE;
+
+/*
+ * If the APC extension is not detected, either because APC is missing or
+ * because auto-detection has been disabled, auto-loading falls back to
+ * Composer's ClassLoader, which is good for development as it does not break
+ * when code is moved in the file system. You can also decorate the base class
+ * loader with another cached solution than the Symfony APC class loader, as
+ * all production sites should have a cached class loader of some sort enabled.
+ *
+ * To do so, you may decorate and replace the local $class_loader variable. For
+ * example, to use Symfony's APC class loader without automatic detection,
+ * uncomment the code below.
+ */
+/*
+if ($settings['hash_salt']) {
+ $prefix = 'drupal.' . hash('sha256', 'drupal.' . $settings['hash_salt']);
+ $apc_loader = new \Symfony\Component\ClassLoader\ApcClassLoader($prefix, $class_loader);
+ unset($prefix);
+ $class_loader->unregister();
+ $apc_loader->register();
+ $class_loader = $apc_loader;
+}
+*/
+
+/**
+ * Authorized file system operations:
+ *
+ * The Update Manager module included with Drupal provides a mechanism for
+ * site administrators to securely install missing updates for the site
+ * directly through the web user interface. On securely-configured servers,
+ * the Update manager will require the administrator to provide SSH or FTP
+ * credentials before allowing the installation to proceed; this allows the
+ * site to update the new files as the user who owns all the Drupal files,
+ * instead of as the user the webserver is running as. On servers where the
+ * webserver user is itself the owner of the Drupal files, the administrator
+ * will not be prompted for SSH or FTP credentials (note that these server
+ * setups are common on shared hosting, but are inherently insecure).
+ *
+ * Some sites might wish to disable the above functionality, and only update
+ * the code directly via SSH or FTP themselves. This setting completely
+ * disables all functionality related to these authorized file operations.
+ *
+ * @see https://www.drupal.org/node/244924
+ *
+ * Remove the leading hash signs to disable.
+ */
+# $settings['allow_authorize_operations'] = FALSE;
+
+/**
+ * Default mode for directories and files written by Drupal.
+ *
+ * Value should be in PHP Octal Notation, with leading zero.
+ */
+# $settings['file_chmod_directory'] = 0775;
+# $settings['file_chmod_file'] = 0664;
+
+/**
+ * Public file base URL:
+ *
+ * An alternative base URL to be used for serving public files. This must
+ * include any leading directory path.
+ *
+ * A different value from the domain used by Drupal to be used for accessing
+ * public files. This can be used for a simple CDN integration, or to improve
+ * security by serving user-uploaded files from a different domain or subdomain
+ * pointing to the same server. Do not include a trailing slash.
+ */
+# $settings['file_public_base_url'] = 'http://downloads.example.com/files';
+
+/**
+ * Public file path:
+ *
+ * A local file system path where public files will be stored. This directory
+ * must exist and be writable by Drupal. This directory must be relative to
+ * the Drupal installation directory and be accessible over the web.
+ */
+# $settings['file_public_path'] = 'sites/default/files';
+
+/**
+ * Private file path:
+ *
+ * A local file system path where private files will be stored. This directory
+ * must be absolute, outside of the Drupal installation directory and not
+ * accessible over the web.
+ *
+ * Note: Caches need to be cleared when this value is changed to make the
+ * private:// stream wrapper available to the system.
+ *
+ * See https://www.drupal.org/documentation/modules/file for more information
+ * about securing private files.
+ */
+# $settings['file_private_path'] = '';
+
+/**
+ * Session write interval:
+ *
+ * Set the minimum interval between each session write to database.
+ * For performance reasons it defaults to 180.
+ */
+# $settings['session_write_interval'] = 180;
+
+/**
+ * String overrides:
+ *
+ * To override specific strings on your site with or without enabling the Locale
+ * module, add an entry to this list. This functionality allows you to change
+ * a small number of your site's default English language interface strings.
+ *
+ * Remove the leading hash signs to enable.
+ *
+ * The "en" part of the variable name, is dynamic and can be any langcode of
+ * any added language. (eg locale_custom_strings_de for german).
+ */
+# $settings['locale_custom_strings_en'][''] = array(
+# 'forum' => 'Discussion board',
+# '@count min' => '@count minutes',
+# );
+
+/**
+ * A custom theme for the offline page:
+ *
+ * This applies when the site is explicitly set to maintenance mode through the
+ * administration page or when the database is inactive due to an error.
+ * The template file should also be copied into the theme. It is located inside
+ * 'core/modules/system/templates/maintenance-page.html.twig'.
+ *
+ * Note: This setting does not apply to installation and update pages.
+ */
+# $settings['maintenance_theme'] = 'bartik';
+
+/**
+ * PHP settings:
+ *
+ * To see what PHP settings are possible, including whether they can be set at
+ * runtime (by using ini_set()), read the PHP documentation:
+ * http://php.net/manual/ini.list.php
+ * See \Drupal\Core\DrupalKernel::bootEnvironment() for required runtime
+ * settings and the .htaccess file for non-runtime settings.
+ * Settings defined there should not be duplicated here so as to avoid conflict
+ * issues.
+ */
+
+/**
+ * If you encounter a situation where users post a large amount of text, and
+ * the result is stripped out upon viewing but can still be edited, Drupal's
+ * output filter may not have sufficient memory to process it. If you
+ * experience this issue, you may wish to uncomment the following two lines
+ * and increase the limits of these variables. For more information, see
+ * http://php.net/manual/pcre.configuration.php.
+ */
+# ini_set('pcre.backtrack_limit', 200000);
+# ini_set('pcre.recursion_limit', 200000);
+
+/**
+ * Active configuration settings.
+ *
+ * By default, the active configuration is stored in the database in the
+ * {config} table. To use a different storage mechanism for the active
+ * configuration, do the following prior to installing:
+ * - Create an "active" directory and declare its path in $config_directories
+ * as explained under the 'Location of the site configuration files' section
+ * above in this file. To enhance security, you can declare a path that is
+ * outside your document root.
+ * - Override the 'bootstrap_config_storage' setting here. It must be set to a
+ * callable that returns an object that implements
+ * \Drupal\Core\Config\StorageInterface.
+ * - Override the service definition 'config.storage.active'. Put this
+ * override in a services.yml file in the same directory as settings.php
+ * (definitions in this file will override service definition defaults).
+ */
+# $settings['bootstrap_config_storage'] = array('Drupal\Core\Config\BootstrapConfigStorageFactory', 'getFileStorage');
+
+/**
+ * Configuration overrides.
+ *
+ * To globally override specific configuration values for this site,
+ * set them here. You usually don't need to use this feature. This is
+ * useful in a configuration file for a vhost or directory, rather than
+ * the default settings.php.
+ *
+ * Note that any values you provide in these variable overrides will not be
+ * viewable from the Drupal administration interface. The administration
+ * interface displays the values stored in configuration so that you can stage
+ * changes to other environments that don't have the overrides.
+ *
+ * There are particular configuration values that are risky to override. For
+ * example, overriding the list of installed modules in 'core.extension' is not
+ * supported as module install or uninstall has not occurred. Other examples
+ * include field storage configuration, because it has effects on database
+ * structure, and 'core.menu.static_menu_link_overrides' since this is cached in
+ * a way that is not config override aware. Also, note that changing
+ * configuration values in settings.php will not fire any of the configuration
+ * change events.
+ */
+# $config['system.file']['path']['temporary'] = '/tmp';
+# $config['system.site']['name'] = 'My Drupal site';
+# $config['system.theme']['default'] = 'stark';
+# $config['user.settings']['anonymous'] = 'Visitor';
+
+/**
+ * Fast 404 pages:
+ *
+ * Drupal can generate fully themed 404 pages. However, some of these responses
+ * are for images or other resource files that are not displayed to the user.
+ * This can waste bandwidth, and also generate server load.
+ *
+ * The options below return a simple, fast 404 page for URLs matching a
+ * specific pattern:
+ * - $config['system.performance']['fast_404']['exclude_paths']: A regular
+ * expression to match paths to exclude, such as images generated by image
+ * styles, or dynamically-resized images. The default pattern provided below
+ * also excludes the private file system. If you need to add more paths, you
+ * can add '|path' to the expression.
+ * - $config['system.performance']['fast_404']['paths']: A regular expression to
+ * match paths that should return a simple 404 page, rather than the fully
+ * themed 404 page. If you don't have any aliases ending in htm or html you
+ * can add '|s?html?' to the expression.
+ * - $config['system.performance']['fast_404']['html']: The html to return for
+ * simple 404 pages.
+ *
+ * Remove the leading hash signs if you would like to alter this functionality.
+ */
+# $config['system.performance']['fast_404']['exclude_paths'] = '/\/(?:styles)|(?:system\/files)\//';
+# $config['system.performance']['fast_404']['paths'] = '/\.(?:txt|png|gif|jpe?g|css|js|ico|swf|flv|cgi|bat|pl|dll|exe|asp)$/i';
+# $config['system.performance']['fast_404']['html'] = '<!DOCTYPE html><html><head><title>404 Not Found</title></head><body><h1>Not Found</h1><p>The requested URL "@path" was not found on this server.</p></body></html>';
+
+/**
+ * Load services definition file.
+ */
+$settings['container_yamls'][] = $app_root . '/' . $site_path . '/services.yml';
+
+/**
+ * Override the default service container class.
+ *
+ * This is useful for example to trace the service container for performance
+ * tracking purposes, for testing a service container with an error condition or
+ * to test a service container that throws an exception.
+ */
+# $settings['container_base_class'] = '\Drupal\Core\DependencyInjection\Container';
+
+/**
+ * Override the default yaml parser class.
+ *
+ * Provide a fully qualified class name here if you would like to provide an
+ * alternate implementation YAML parser. The class must implement the
+ * \Drupal\Component\Serialization\SerializationInterface interface.
+ */
+# $settings['yaml_parser_class'] = NULL;
+
+/**
+ * Trusted host configuration.
+ *
+ * Drupal core can use the Symfony trusted host mechanism to prevent HTTP Host
+ * header spoofing.
+ *
+ * To enable the trusted host mechanism, you enable your allowable hosts
+ * in $settings['trusted_host_patterns']. This should be an array of regular
+ * expression patterns, without delimiters, representing the hosts you would
+ * like to allow.
+ *
+ * For example:
+ * @code
+ * $settings['trusted_host_patterns'] = array(
+ * '^www\.example\.com$',
+ * );
+ * @endcode
+ * will allow the site to only run from www.example.com.
+ *
+ * If you are running multisite, or if you are running your site from
+ * different domain names (eg, you don't redirect http://www.example.com to
+ * http://example.com), you should specify all of the host patterns that are
+ * allowed by your site.
+ *
+ * For example:
+ * @code
+ * $settings['trusted_host_patterns'] = array(
+ * '^example\.com$',
+ * '^.+\.example\.com$',
+ * '^example\.org$',
+ * '^.+\.example\.org$',
+ * );
+ * @endcode
+ * will allow the site to run off of all variants of example.com and
+ * example.org, with all subdomains included.
+ */
+
+/**
+ * The default list of directories that will be ignored by Drupal's file API.
+ *
+ * By default ignore node_modules and bower_components folders to avoid issues
+ * with common frontend tools and recursive scanning of directories looking for
+ * extensions.
+ *
+ * @see file_scan_directory()
+ * @see \Drupal\Core\Extension\ExtensionDiscovery::scanDirectory()
+ */
+$settings['file_scan_ignore_directories'] = [
+ 'node_modules',
+ 'bower_components',
+];
+
+/**
+ * The default number of entities to update in a batch process.
+ *
+ * This is used by update and post-update functions that need to go through and
+ * change all the entities on a site, so it is useful to increase this number
+ * if your hosting configuration (i.e. RAM allocation, CPU speed) allows for a
+ * larger number of entities to be processed in a single batch run.
+ */
+$settings['entity_update_batch_size'] = 50;
+
+/**
+ * Load local development override configuration, if available.
+ *
+ * Use settings.local.php to override variables on secondary (staging,
+ * development, etc) installations of this site. Typically used to disable
+ * caching, JavaScript/CSS compression, re-routing of outgoing emails, and
+ * other things that should not happen on development and testing sites.
+ *
+ * Keep this code block at the end of this file to take full effect.
+ */
+#
+# if (file_exists($app_root . '/' . $site_path . '/settings.local.php')) {
+# include $app_root . '/' . $site_path . '/settings.local.php';
+# }
diff --git a/share/drupal8/development.services.yml b/share/drupal8/development.services.yml
new file mode 100644
index 0000000..d2857c6
--- /dev/null
+++ b/share/drupal8/development.services.yml
@@ -0,0 +1,9 @@
+# Local development services.
+#
+# To activate this feature, follow the instructions at the top of the
+# 'example.settings.local.php' file, which sits next to this file.
+parameters:
+ http.response.debug_cacheability_headers: true
+services:
+ cache.backend.null:
+ class: Drupal\Core\Cache\NullBackendFactory
diff --git a/share/drupal8/example.settings.local.php b/share/drupal8/example.settings.local.php
new file mode 100644
index 0000000..b1f73dd
--- /dev/null
+++ b/share/drupal8/example.settings.local.php
@@ -0,0 +1,115 @@
+<?php
+
+/**
+ * @file
+ * Local development override configuration feature.
+ *
+ * To activate this feature, copy and rename it such that its path plus
+ * filename is 'sites/default/settings.local.php'. Then, go to the bottom of
+ * 'sites/default/settings.php' and uncomment the commented lines that mention
+ * 'settings.local.php'.
+ *
+ * If you are using a site name in the path, such as 'sites/example.com', copy
+ * this file to 'sites/example.com/settings.local.php', and uncomment the lines
+ * at the bottom of 'sites/example.com/settings.php'.
+ */
+
+/**
+ * Assertions.
+ *
+ * The Drupal project primarily uses runtime assertions to enforce the
+ * expectations of the API by failing when incorrect calls are made by code
+ * under development.
+ *
+ * @see http://php.net/assert
+ * @see https://www.drupal.org/node/2492225
+ *
+ * If you are using PHP 7.0 it is strongly recommended that you set
+ * zend.assertions=1 in the PHP.ini file (It cannot be changed from .htaccess
+ * or runtime) on development machines and to 0 in production.
+ *
+ * @see https://wiki.php.net/rfc/expectations
+ */
+assert_options(ASSERT_ACTIVE, TRUE);
+\Drupal\Component\Assertion\Handle::register();
+
+/**
+ * Enable local development services.
+ */
+$settings['container_yamls'][] = DRUPAL_ROOT . '/sites/development.services.yml';
+
+/**
+ * Show all error messages, with backtrace information.
+ *
+ * In case the error level could not be fetched from the database, as for
+ * example the database connection failed, we rely only on this value.
+ */
+$config['system.logging']['error_level'] = 'verbose';
+
+/**
+ * Disable CSS and JS aggregation.
+ */
+$config['system.performance']['css']['preprocess'] = FALSE;
+$config['system.performance']['js']['preprocess'] = FALSE;
+
+/**
+ * Disable the render cache (this includes the page cache).
+ *
+ * Note: you should test with the render cache enabled, to ensure the correct
+ * cacheability metadata is present. However, in the early stages of
+ * development, you may want to disable it.
+ *
+ * This setting disables the render cache by using the Null cache back-end
+ * defined by the development.services.yml file above.
+ *
+ * Do not use this setting until after the site is installed.
+ */
+# $settings['cache']['bins']['render'] = 'cache.backend.null';
+
+/**
+ * Disable caching for migrations.
+ *
+ * Uncomment the code below to only store migrations in memory and not in the
+ * database. This makes it easier to develop custom migrations.
+ */
+# $settings['cache']['bins']['discovery_migration'] = 'cache.backend.memory';
+
+/**
+ * Disable Dynamic Page Cache.
+ *
+ * Note: you should test with Dynamic Page Cache enabled, to ensure the correct
+ * cacheability metadata is present (and hence the expected behavior). However,
+ * in the early stages of development, you may want to disable it.
+ */
+# $settings['cache']['bins']['dynamic_page_cache'] = 'cache.backend.null';
+
+/**
+ * Allow test modules and themes to be installed.
+ *
+ * Drupal ignores test modules and themes by default for performance reasons.
+ * During development it can be useful to install test extensions for debugging
+ * purposes.
+ */
+$settings['extension_discovery_scan_tests'] = TRUE;
+
+/**
+ * Enable access to rebuild.php.
+ *
+ * This setting can be enabled to allow Drupal's php and database cached
+ * storage to be cleared via the rebuild.php page. Access to this page can also
+ * be gained by generating a query string from rebuild_token_calculator.sh and
+ * using these parameters in a request to rebuild.php.
+ */
+$settings['rebuild_access'] = TRUE;
+
+/**
+ * Skip file system permissions hardening.
+ *
+ * The system module will periodically check the permissions of your site's
+ * site directory to ensure that it is not writable by the website user. For
+ * sites that are managed with a version control system, this can cause problems
+ * when files in that directory such as settings.php are updated, because the
+ * user pulling in the changes won't have permissions to modify files in the
+ * directory.
+ */
+$settings['skip_permissions_hardening'] = TRUE;
diff --git a/share/drupal8/example.sites.php b/share/drupal8/example.sites.php
new file mode 100644
index 0000000..60afae7
--- /dev/null
+++ b/share/drupal8/example.sites.php
@@ -0,0 +1,55 @@
+<?php
+
+/**
+ * @file
+ * Configuration file for multi-site support and directory aliasing feature.
+ *
+ * This file is required for multi-site support and also allows you to define a
+ * set of aliases that map hostnames, ports, and pathnames to configuration
+ * directories in the sites directory. These aliases are loaded prior to
+ * scanning for directories, and they are exempt from the normal discovery
+ * rules. See default.settings.php to view how Drupal discovers the
+ * configuration directory when no alias is found.
+ *
+ * Aliases are useful on development servers, where the domain name may not be
+ * the same as the domain of the live server. Since Drupal stores file paths in
+ * the database (files, system table, etc.) this will ensure the paths are
+ * correct when the site is deployed to a live server.
+ *
+ * To activate this feature, copy and rename it such that its path plus
+ * filename is 'sites/sites.php'.
+ *
+ * Aliases are defined in an associative array named $sites. The array is
+ * written in the format: '<port>.<domain>.<path>' => 'directory'. As an
+ * example, to map https://www.drupal.org:8080/mysite/test to the configuration
+ * directory sites/example.com, the array should be defined as:
+ * @code
+ * $sites = array(
+ * '8080.www.drupal.org.mysite.test' => 'example.com',
+ * );
+ * @endcode
+ * The URL, https://www.drupal.org:8080/mysite/test/, could be a symbolic link
+ * or an Apache Alias directive that points to the Drupal root containing
+ * index.php. An alias could also be created for a subdomain. See the
+ * @link https://www.drupal.org/documentation/install online Drupal installation guide @endlink
+ * for more information on setting up domains, subdomains, and subdirectories.
+ *
+ * The following examples look for a site configuration in sites/example.com:
+ * @code
+ * URL: http://dev.drupal.org
+ * $sites['dev.drupal.org'] = 'example.com';
+ *
+ * URL: http://localhost/example
+ * $sites['localhost.example'] = 'example.com';
+ *
+ * URL: http://localhost:8080/example
+ * $sites['8080.localhost.example'] = 'example.com';
+ *
+ * URL: https://www.drupal.org:8080/mysite/test/
+ * $sites['8080.www.drupal.org.mysite.test'] = 'example.com';
+ * @endcode
+ *
+ * @see default.settings.php
+ * @see \Drupal\Core\DrupalKernel::getSitePath()
+ * @see https://www.drupal.org/documentation/install/multi-site
+ */
diff --git a/templater b/templater
index 72d4b07..6f89909 100755
--- a/templater
+++ b/templater
@@ -321,9 +321,29 @@ function templater_drupal7 {
# Drupal8 implementation
function templater_drupal8 {
- if [ ! -e 'settings.dev.php' ]; then
+ if [ ! -e 'settings.php' ]; then
__templater_echo "Setting up Drupal 8..."
+ if [ ! -e ".gitignore" ] || ! grep -q "^settings.php" .gitignore; then
+ echo settings.php >> .gitignore
+ echo settings.prod.php >> .gitignore
+ echo services.yml >> .gitignore
+ fi
+
+ if [ ! -e "settings.dev.php" ]; then
+ cp $DIRNAME/share/drupal8/default.settings.php settings.dev.php
+ cp $DIRNAME/share/drupal8/default.settings.php .
+ fi
+
+ ln -sf settings.dev.php settings.php
+
+ if [ ! -e "services.yml" ]; then
+ cp $DIRNAME/share/drupal8/default.services.yml services.dev.yml
+ cp $DIRNAME/share/drupal8/default.services.yml .
+ fi
+
+ ln -sf services.dev.yml services.yml
+
if [ ! -e "Makefile" ]; then
cp $DIRNAME/share/drupal8/Makefile .
#elif ! grep -q ^drupal: Makefile; then