1 files changed, 155 insertions, 0 deletions
diff --git a/sci/electronics/ivi/ivi.SlackBuild b/sci/electronics/ivi/ivi.SlackBuild
new file mode 100755
index 00000000..7d2c3bab
--- /dev/null
+++ b/sci/electronics/ivi/ivi.SlackBuild
@@ -0,0 +1,155 @@
+#!/bin/bash
+#
+# SlackBuild for IVI-0.4
+# http://sourceforge.net/projects/ivi
+#
+# Author: Luis ( luis at riseup d0t net )
+#
+
+CWD=`pwd`
+
+# Look for slackbuildrc
+if [ -f ~/.slackbuildrc ]; then
+  source ~/.slackbuildrc
+elif [ -f /etc/slackbuildrc ]; then
+  source /etc/slackbuildrc
+fi
+
+# Set variables
+SRC_NAME="ivi"
+PKG_NAME="ivi"
+ARCH=${ARCH:=i486}
+VERSION=${VERSION:=0.4_20031121}
+BUILD=${BUILD:=1ls}
+SRC_DIR=${SRC_DIR:=$CWD}
+TMP=${TMP:=/tmp}
+PKG=${PKG:=$TMP/package-$PKG_NAME}
+REPOS=${REPOS:=$TMP}
+PREFIX=${PREFIX:=/usr}
+PKG_SRC=$SRC_NAME-0.4-pre-20031121
+
+# Set system libraries' path and optmization flags based on $ARCH
+LIBDIR=$PREFIX/lib
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mcpu=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIR="$PREFIX/lib64"
+fi
+
+# Set error codes (used by createpkg)
+ERROR_WGET=31;      ERROR_MAKE=32;      ERROR_INSTALL=33
+ERROR_MD5=34;       ERROR_CONF=35;      ERROR_HELP=36
+ERROR_TAR=37;       ERROR_MKPKG=38;     ERROR_GPG=39
+ERROR_PATCH=40;     ERROR_VCS=41;       ERROR_MKDIR=42
+
+# Clean up any leftovers of previous builds
+rm -rf $PKG_SRC 2>/dev/null
+rm -rf $PKG 2>/dev/null
+
+# Create directories, if necessary
+mkdir -p $SRC_DIR || exit $ERROR_MKDIR
+mkdir -p $PKG || exit $ERROR_MKDIR
+mkdir -p $REPOS || exit $ERROR_MKDIR
+
+# Dowload source, if necessary
+SRC="$PKG_SRC.tar.gz"
+URL="http://downloads.sourceforge.net/ivi/$SRC"
+
+if [ ! -f "$SRC_DIR/$SRC" ]; then
+  wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
+fi
+
+# Untar, patch, configure, compile and install
+tar --no-same-owner --no-same-permissions -xvf $SRC_DIR/$SRC || exit $ERROR_TAR
+cd $PKG_SRC
+patch -p1 < $CWD/ivi-0.4-pre-20031121-gcc3.4.patch || exit $ERROR_PATCH
+CFLAGS="$SLKCFLAGS" \
+  CXXFLAGS="$SLKCFLAGS" \
+  ./configure \
+  --prefix=$PREFIX --libdir=$LIBDIR --enable-release || exit $ERROR_CONF
+make || exit $ERROR_MAKE
+make install prefix=$PKG/$PREFIX || exit $ERROR_INSTALL
+
+# Fix permissions
+find $PKG -type f -exec chmod a-x {} \;
+chmod a+x $PKG/$PREFIX/bin/ivi
+find $PKG/$PREFIX/modules -name "*.vpi" -exec chmod a+x {} \;
+
+# Strip binaries
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and link manpages, if any
+if [ -d $PKG/$PREFIX/man ]; then
+  ( cd $PKG/$PREFIX/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# Compress info files, if any
+if [ -d $PKG/$PREFIX/info ]; then
+  ( cd $PKG/$PREFIX/info
+    rm -f dir
+    gzip -9 *
+  )
+fi
+
+# Install documentation and examples
+DOCS="LIMITATIONS README *.txt"
+mkdir -p $PKG/$PREFIX/doc/$PKG_NAME-$VERSION || exit $ERROR_MKDIR
+cp -a $DOCS $PKG/$PREFIX/doc/$PKG_NAME-$VERSION
+mv $PKG/$PREFIX/{examples,doc/getting_started,doc/ivi_commands} \
+  $PKG/$PREFIX/doc/$PKG_NAME-$VERSION
+
+# Add slack-desc file
+mkdir -p $PKG/install || exit $ERROR_MKDIR
+cat << EOF > $PKG/install/slack-desc
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+   |-----handy-ruler-----------------------------------------------------------|
+ivi: ivi (Icarus Verilog Interactive)
+ivi:
+ivi: IVI is a graphical, interactive user-interface to various Open-Source HDL
+ivi: simulators. IVI allows the user to control simulation and view signal
+ivi: waveforms as the data is produced by the simulation.
+ivi:
+ivi: For more information, http://sourceforge.net/projects/ivi
+ivi:
+ivi:
+ivi:
+ivi:
+EOF
+
+# Build the package
+cd $PKG
+makepkg -l y -c n $REPOS/$PKG_NAME-$VERSION-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG
+
+# Delete source and build directories, if requested
+if [ "$CLEANUP" == "yes" ]; then
+  rm -rf $CWD/$PKG_SRC $PKG
+fi