diff options
Diffstat (limited to 'patches/imagemagick')
-rw-r--r-- | patches/imagemagick/imagemagick.CVE-2005-4601.CVE-2006-0082.diff.gz | bin | 1491 -> 0 bytes | |||
-rwxr-xr-x | patches/imagemagick/imagemagick.SlackBuild | 172 | ||||
-rw-r--r-- | patches/imagemagick/slack-desc | 19 |
3 files changed, 0 insertions, 191 deletions
diff --git a/patches/imagemagick/imagemagick.CVE-2005-4601.CVE-2006-0082.diff.gz b/patches/imagemagick/imagemagick.CVE-2005-4601.CVE-2006-0082.diff.gz Binary files differdeleted file mode 100644 index 54a61cf5..00000000 --- a/patches/imagemagick/imagemagick.CVE-2005-4601.CVE-2006-0082.diff.gz +++ /dev/null diff --git a/patches/imagemagick/imagemagick.SlackBuild b/patches/imagemagick/imagemagick.SlackBuild deleted file mode 100755 index 294730df..00000000 --- a/patches/imagemagick/imagemagick.SlackBuild +++ /dev/null @@ -1,172 +0,0 @@ -#!/bin/bash -# -# got it from ftp://ftp.slackware.com/pub/slackware/slackware-10.2/patches/source/imagemagick/imagemagick.SlackBuild -# small changes by rhatto. -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building cairo are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap -# else -# echo Sleeping 3 seconds... -# sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -PACKAGE="imagemagick" -TMP=${TMP:=/tmp} -ARCH=${ARCH:=i486} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -# ------- error codes for createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 -ERROR_PATCH=40 - -TMP="$TMP/$PACKAGE" -PKG=$TMP/package-imagemagick -rm -rf $TMP -mkdir -p $PKG - -# NOTE: This is to cope with ImageMagick version numbers such as 5.4.7-4, -# which occur fairly often (but not always). If these numbers are all the same, -# then this is not one of those versions. - -# This is a bit messy, so we'll explain it well. :-) - -# This is the base version number, which is needed to cd into the source tree -BASEVER=6.3.3 - -# This is the version number used in the source tarball filename -FILEVER=6.3.3-0 - -# This is the version number used in the package, where a version number cannot -# contain a '-' -PKGVER=6.3.3_0 - -RTOOL="wget" -PACKAGE_EXT="bz2" -SRC="ImageMagick-$FILEVER.tar.$PACKAGE_EXT" -URL="http://slack.sarava.org/slackware/slackware-11.0/patches/source/imagemagick/ImageMagick-6.3.3-0.tar.bz2" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET -fi - -if [ "$ARCH" = "i386" ]; then - SLKCFLAGS="-O2 -march=i386 -mcpu=i686" -elif [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mcpu=i686" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2" -fi - -# --with-x or not --with-x, that is the question. It seems many other -# distributions don't compile with X support, but it's been traditional -# here. I am moving the prefix to /usr (instead of /usr/X11R6) though, -# because many X-linked things are put into /usr now (like GNOME), and -# I've heard a few reports of compile failures when this isn't in /usr. -# Everyone else does it -- time to follow the path of least resistance. - -cd $TMP - -tar xvf $SRC_DIR/$SRC || exit $ERROR_TAR -cd ImageMagick-$BASEVER - -if [ "$BASEVER" == "6.2.3" ]; then - zcat $CWD/imagemagick.CVE-2005-4601.CVE-2006-0082.diff.gz | patch -p1 --verbose || exit $ERROR_PATCH -fi - -chown -R root.root . -find . -perm 664 -exec chmod 644 {} \; -find . -perm 600 -exec chmod 644 {} \; -find . -perm 444 -exec chmod 644 {} \; -find . -perm 400 -exec chmod 644 {} \; -find . -perm 440 -exec chmod 644 {} \; -find . -perm 777 -exec chmod 755 {} \; -find . -perm 775 -exec chmod 755 {} \; -find . -perm 511 -exec chmod 755 {} \; -find . -perm 711 -exec chmod 755 {} \; -find . -perm 555 -exec chmod 755 {} \; -CFLAGS="$SLKCFLAGS" \ -CXXFLAGS="$SLKCFLAGS" \ -./configure --prefix=/usr \ - --program-prefix= \ - --libdir=$LIBDIR \ - --enable-16bit-pixel \ - --with-x \ - --with-frozenpaths=no \ - --enable-static=no \ - --enable-shared \ - --with-perl \ - $ARCH-slackware-linux -make || exit $ERROR_MAKE -make install DESTDIR=$PKG || exit $ERROR_INSTALL - -# Lately ImageMagick has been smoking crack: -rm -f $PKG/usr/lib/libltdl.* - -( cd $PKG - # Nothing but a perl upgrade should replace this (and maybe not even that) - find . -name perllocal.pod | xargs rm -f -) - -# DESTDIR is still broken about this, but works well enough otherwise: -chmod 644 $PKG/usr/share/man/man3/* -mv $PKG/usr/share/man/man3 $PKG/usr/man -rmdir $PKG/usr/share/man - -( cd $PKG/usr/lib/perl5 - # Ditch empty dirs: - rmdir */* 2> /dev/null - rmdir * 2> /dev/null -) - -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) -chown -R root.bin $PKG/usr/bin -gzip -9 $PKG/usr/man/man?/*.? - -mkdir -p $PKG/usr -mv $PKG/usr/share/doc $PKG/usr -cp -a \ - AUTHORS LICENSE NEWS NOTICE Platforms.txt QuickStart.txt README.txt \ - $PKG/usr/doc/Imag* - -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc - -cd $PKG -makepkg -l y -c n $REPOS/imagemagick-$PKGVER-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/patches/imagemagick/slack-desc b/patches/imagemagick/slack-desc deleted file mode 100644 index 80ac9a67..00000000 --- a/patches/imagemagick/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -imagemagick: imagemagick (a robust collection of image processing tools) -imagemagick: -imagemagick: ImageMagick is a collection of tools for manipulating and displaying -imagemagick: digital images. It can merge images, transform image dimensions, -imagemagick: do screen captures, create animation sequences, and convert between -imagemagick: many different image formats. -imagemagick: -imagemagick: ImageMagick was written by John Cristy of ImageMagick Studio. -imagemagick: -imagemagick: Home page: http://www.imagemagick.org/ -imagemagick: |