diff options
Diffstat (limited to 'network')
| -rwxr-xr-x | network/amule/aMule.SlackBuild | 106 | ||||
| -rwxr-xr-x | network/azureus/azureus.SlackBuild | 96 | ||||
| -rwxr-xr-x | network/dns/avahi/avahi.SlackBuild | 127 | ||||
| -rwxr-xr-x | network/lirc/lirc.SlackBuild | 122 | ||||
| -rwxr-xr-x | network/skype/skype.SlackBuild | 171 | ||||
| -rw-r--r-- | network/webalizer/slack-desc | 19 | ||||
| -rwxr-xr-x | network/webalizer/webalizer.SlackBuild | 207 | ||||
| -rw-r--r-- | network/webalizer/webalizer_static.slack-desc | 19 |
8 files changed, 0 insertions, 867 deletions
diff --git a/network/amule/aMule.SlackBuild b/network/amule/aMule.SlackBuild deleted file mode 100755 index 61b9b642..00000000 --- a/network/amule/aMule.SlackBuild +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/bash -# -# slackbuild script for aMule -# by rhatto at riseup.net -# - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="aMule" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=2.1.3} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="bz2" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://easynews.dl.sourceforge.net/sourceforge/amule/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR --enable-amulecmd -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -aMule: aMule (A multi-platform eMule-like ed2k client) -aMule: -aMule: aMule is short for "all-platform eMule-like file-sharing program", -aMule: or, in short, "all-platform Mule". It's a port of the well-known -aMule: eMule P2P client for the eDonkey2000 and Kad file sharing networks, -aMule: supporting most of eMule's features. Additionally, it provides a -aMule: small separate Web server and command line interface to connect to -aMule: a running aMule via the network. -aMule: -aMule: -aMule: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in ABOUT-NLS AUTHORS COPYING Changelog Doxyfile ED2K-Links.HOWTO README; do - cp $CWD/docs/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/network/azureus/azureus.SlackBuild b/network/azureus/azureus.SlackBuild deleted file mode 100755 index 67ff7bcd..00000000 --- a/network/azureus/azureus.SlackBuild +++ /dev/null @@ -1,96 +0,0 @@ -#!/bin/bash -# -# slackbuild for azureus -# - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PRGNAM="azureus" -PACKAGE="$PRGNAM" -VERSION=${VERSION:=2.5.0.0} -ARCH=${ARCH:=i486} -BUILD=${BUILD:=1rha} -TMP=${TMP:=/tmp} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -PACKAGE_EXT="bz2" -SRC="Azureus_$VERSION"_"linux-$ARCH.tar.$PACKAGE_EXT" -URL="http://easynews.dl.sourceforge.net/sourceforge/$PACKAGE/$SRC" -RTOOL="wget" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -rm -rf $PACKAGE-$VERSION $PACKAGE-$VERSION-$ARCH-$BUILD.tgz -rm -rf $TMP/package-$PACKAGE -mkdir -p $TMP/package-$PACKAGE/install -cd $TMP/package-$PACKAGE - -mkdir -p usr/local -cd usr/local - -tar xvf$tarflag $SRC_DIR/$SRC -cd $TMP/package-$PACKAGE - -if [ "$VERSION" == "2.4.0.2" ]; then - rm usr/local/azureus/plugins/azplugins/* - wget "http://azureus.sourceforge.net/plugins/azplugins_2.0.jar" -O "usr/local/azureus/plugins/azplugins/azplugins_2.0.jar" -fi - -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -azureus: azureus (a java BitTorrent client) -azureus: -azureus: Azureus implements the BitTorrent protocol using java language -azureus: and comes bundled with many invaluable features for both beginners -azureus: and advanced users. -azureus: -azureus: -azureus: -azureus: -azureus: -azureus: -EOF - -makepkg -c y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi diff --git a/network/dns/avahi/avahi.SlackBuild b/network/dns/avahi/avahi.SlackBuild deleted file mode 100755 index 1c973122..00000000 --- a/network/dns/avahi/avahi.SlackBuild +++ /dev/null @@ -1,127 +0,0 @@ -#!/bin/bash -# -# slackbuild script for avahi -# by rhatto at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building avahi are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap -# else -# echo Sleeping 3 seconds... -# sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="avahi" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=0.6.14} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 - export LDFLAGS="-L/lib64 -L/usr/lib64" - export PKG_CONFIG_PATH="$LIBDIR/qt/lib/" -else - LIBDIR=/usr/lib -fi - -# ------- error codes for createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38 - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://avahi.org/download/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC || exit $ERROR_TAR -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR --disable-qt4 || exit $ERROR_CONF -make || exit $ERROR_MAKE -make DESTDIR=$TMP/package-$PACKAGE install || exit $ERROR_INSTALL - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -avahi: avahi (network service discovery system) -avahi: -avahi: Avahi is a system which facilitates service discovery on a local -avahi: network. This means that you can plug your laptop or computer into a -avahi: network and instantly be able to view other people who you can chat -avahi: with, find printers to print to or find files being shared. This -avahi: kind of technology is already found in MacOS X (branded -avahi: 'Rendezvous', 'Bonjour' and sometimes 'Zeroconf') and is very -avahi: convenient. Avahi is mainly based on Lennart Poettering's flexmdns -avahi: mDNS implementation for Linux which has been discontinued in favour -avahi: of Avahi. -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -DOCS="API-CHANGES-0.6 AUTHORS COMPAT-LAYERS DBUS-API HACKING INSTALL MALLOC NEWS README TODO" - -for file in $DOCS; do - cp $CWD/docs/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/network/lirc/lirc.SlackBuild b/network/lirc/lirc.SlackBuild deleted file mode 100755 index 13268723..00000000 --- a/network/lirc/lirc.SlackBuild +++ /dev/null @@ -1,122 +0,0 @@ -#!/bin/bash -# -# slackbuild script for lirc -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building lirc are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap -# else -# echo Sleeping 3 seconds... -# sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="lirc" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=0.8.1pre2} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - export LDFLAGS="-L/lib64 -L/usr/lib64" - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -# ------- error codes for createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 -ERROR_PATCH=40 - -RTOOL="wget" -PACKAGE_EXT="bz2" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://lirc.sourceforge.net/software/snapshots/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf $SRC_DIR/$SRC || exit $ERROR_TAR -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff || exit $ERROR_PATCH -fi - -# Warning, building without any driver!! -./configure --prefix=/usr --with-driver=none --enable-sandbox --sysconfdir=/etc --libdir=$LIBDIR || exit $ERROR_CONF -make || exit $ERROR_MAKE -make DESTDIR=$TMP/package-$PACKAGE install || exit $ERROR_INSTALL - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -lirc: lirc -lirc: -lirc: LIRC is a package that allows you to decode and send infra-red -lirc: signals of many (but not all) commonly used remote controls. -lirc: -lirc: -lirc: -lirc: -lirc: -lirc: http://www.lirc.org/ -lirc: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -DOCS="ANNOUNCE AUTHORS COPYING ChangeLog INSTALL NEWS README TODO" - -for file in $DOCS; do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/network/skype/skype.SlackBuild b/network/skype/skype.SlackBuild deleted file mode 100755 index e5550d89..00000000 --- a/network/skype/skype.SlackBuild +++ /dev/null @@ -1,171 +0,0 @@ -#!/bin/bash -# -# slackbuild for kile, by Rudson R. Alves -# requires: none -# tested: skype_staticQT-1.3.0.53 - -CWD=`pwd` - -# ---- Inicializa variáveis com o slackbuild ------------ -if [ -e "/root/.slackbuildrc" ]; then - source /root/.slackbuildrc -elif [ -e "/etc/slackbuildrc" ]; then - source /etc/slackbuildrc -fi - -# -------- Variáveis de controle de versão -------------- -# Nome da fonte para a qual o slackbuild foi construído e -# o seu md5sum -SRC_ORIG="skype_staticQT-1.3.0.53-generic.tar.bz2" -MD5_ORIG="9ca128f45c73cd76862260bc6b9f196c" -PACKAGE_ORIG=`echo $SRC_ORIG | sed -r 's/(.*)_staticQT-(.*)-.*\.(.*\..*)$/\1/'` -VERSION_ORIG=`echo $SRC_ORIG | sed -r 's/(.*)_staticQT-(.*)-.*\.(.*\..*)$/\2/'` - EXTENSION=`echo $SRC_ORIG | sed -r 's/(.*)_staticQT-(.*)-.*\.(.*\..*)$/\3/'` - -# ------- Códigos de erro para o createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 -ERROR_PATCH=40; ERROR_VCS=41 - -# --------- Inicializa variáveis de entrada ------------- -PACKAGE=$PACKAGE_ORIG -ARCH=${ARCH:=i468} -SRC_DIR=${SRC:=$CWD} -VERSION=${VERSION:=$VERSION_ORIG} -SRC=${PACKAGE}_staticQT-$VERSION-generic.$EXTENSION -BUILD=${BUILD:=1rud} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} -PREFIX=${PREFIX:=/opt/kde} -OPTCONF=${OPTCONF:=""} -MD5=${MD5:=$MD5_ORIG} -URL=${URL:="http://www.skype.com/go/getskype-linux-static"} - -# ---------------- SlackBuild Help ---------------------- -if [ "$1" = "--help" -o "$1" = "help" ]; then - echo -e "\033[01;32m -Use: var1=\"value 1\" var2=\"value 2\" ... <package>.SlackBuild -where: - ARCH=machine arch (i386, i486, i686, ...) - VERSION=package version - BUILD=package build version (default 1rud) - SRC=source name of package - SRC_DIR=source directory (default $PWD) - TMP=temporary directory (default /tmp) - REPOS=repository directory - PREFIX=prefix from install package - OPTCONF=options to pass from ./configure. To configure - help, use OPTCONF=\"--help\" - MD5=md5sum from package source - URL=url from package source -\033[m" - exit $ERROR_HELP -fi - -# ---------------- Download fontes ---------------------- -# Fonte a ser compilada, com o path -SOURCE=$SRC_DIR/$PACKAGE/$SRC -# Verifica existência do pacote em $SRC em $SRC_DIR -if [ ! -e $SOURCE ]; then - echo -e "\n\n\033[01;32m Download $SRC \n\033[m" - wget "$URL" -P "$SRC_DIR/$PACKAGE/" - # Verifica se o - if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m No such source file in $URL\n\033[m" - exit $ERROR_WGET - fi -fi - -# ------------------ Checa md5sum ----------------------- -if [ "$SRC_ORIG" = "$SRC" -o "$MD5" != "$MD5_ORIG" -a "$MD5" != "no" ]; then - SUM=`md5sum $SOURCE | awk '{print $1}'` - if [ "$SUM" != "$MD5" ]; then - echo -e "\n\n\033[01;31m MD5SUM error: run Slackbuild again \n\033[m" - echo -e "\033[01;31m Remove $PACKAGE from $SRC_DIR and start Slackbuild again or use MD5=\"no\" \n\033[m" - exit $ERROR_MD5 - fi - echo -e "\n\n\033[01;32m Md5sum Ok \n\033[m" -fi - -# -------------- Desempacota fontes --------------------- -# Desempacota fontes em PKG_SRC=$TMP/$PACKAGE-source -PKG=$TMP/$PACKAGE -rm -rf $PKG 2>/dev/null -mkdir -p $PKG/opt -# Desempacota $SOURCE em $TMP/$PACKAGE-source -tar xvf $SOURCE -C $PKG/opt -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m $SOURCE file error \n\033[m" - exit $ERROR_TAR -fi - -mkdir -p $PKG/usr/share/applications/ -cd $PKG/opt/ -SKYPE_NAME=$( ls ) -SKYPE_DIR=$PKG/opt/$SKYPE_NAME - -# Cria entrada em menu -cp $SKYPE_DIR/skype.desktop $PKG/usr/share/applications/ - -# Cria link para aplicativo -( - mkdir -p $PKG/usr/bin - cd $PKG/usr/bin - ln -s ../../opt/$SKYPE_NAME/skype skype -) - -# Copiar icones -mkdir -p $PKG/opt/kde/share/icons/hicolor/16x16/apps -mkdir -p $PKG/opt/kde/share/icons/hicolor/32x32/apps -mkdir -p $PKG/opt/kde/share/icons/hicolor/48x48/apps -cp $SKYPE_DIR/icons/skype_16_32.png $PKG/opt/kde/share/icons/hicolor/16x16/apps/skype.png -cp $SKYPE_DIR/icons/skype_32_32.png $PKG/opt/kde/share/icons/hicolor/32x32/apps/skype.png -cp $SKYPE_DIR/icons/skype_48_32.png $PKG/opt/kde/share/icons/hicolor/48x48/apps/skype.png - -# ----------------- Stripa código ----------------------- -cd $PKG -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -# ---------------- Cria slack-desc ---------------------- -mkdir $PKG/install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |--------handy-ruler------------------------------------------------------| -skype: Skype 1.3.0.53 -skype: -skype: Skype is a little piece of software that lets you talk over the -skype: Internet to anyone, anywhere in the world for free. -skype: -skype: -skype: -skype: -skype: -skype: -EOF - -# ----------------- Documentações ----------------------- -# Criar diretório de documentação -PKG_DOC=$PKG/usr/doc/$PACKAGE-$VERSION -mkdir -p $PKG_DOC -cp $SKYPE_DIR/{LICENSE,README} $PKG_DOC - -# --------------- Constroi o pacote --------------------- -echo -e "\n\n\033[01;32m makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz \n\033[m" -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz -if [ $? -ne 0 ]; then - exit $ERROR_MKPKG -fi - -# ----------- Remove arquivos temporários --------------- -if [ "$CLEANUP" = "yes" ]; then - echo -e "\n\n\033[01;32m Remove files... \n\033[m" - rm -rf $PKG $PKG_SRC -fi diff --git a/network/webalizer/slack-desc b/network/webalizer/slack-desc deleted file mode 100644 index 35b8962a..00000000 --- a/network/webalizer/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -webalizer: webalizer (webserver log analysis) -webalizer: -webalizer: The Webalizer is a fast, free web server log file analysis program. -webalizer: It produces highly detailed, easily configurable usage reports in -webalizer: HTML format, for viewing with a standard web browser. -webalizer: -webalizer: -webalizer: -webalizer: -webalizer: webalizer lives at http://www.mrunix.net/webalizer/ -webalizer: diff --git a/network/webalizer/webalizer.SlackBuild b/network/webalizer/webalizer.SlackBuild deleted file mode 100755 index ec8d8bed..00000000 --- a/network/webalizer/webalizer.SlackBuild +++ /dev/null @@ -1,207 +0,0 @@ -#!/bin/bash -# Copyright (c) 2006 Eric Hameleers <alien@slackware.com> -# Distributed under the terms of the GNU General Public License, Version 2 -# ----------------------------------------------------------------------------- -# -# Slackware SlackBuild script -# =========================== -# By: Eric Hameleers <alien@slackware.com> -# For: webalizer -# URL: http://www.mrunix.net/webalizer/ -# Needs: gd, freetype2 -# Changelog: -# 2.01.10-1: 15/may/2005 by Eric Hameleers <alien@sox.homeip.net> -# * Initial build. -# 2.01.10-2: 15/may/2005 by Eric Hameleers <alien@sox.homeip.net> -# * Fixed the DNS resolving (detection of db 1.85 compat) -# 2.01.10-3: 28/apr/2006 by Eric Hameleers <alien@slackware.com> -# * Linked against gd-nox to avoid dependency on x11 (still -# needs freetype2 though!) -# 2.01.10-4: 28/apr/2006 by Eric Hameleers <alien@slackware.com> -# * Added a "STATIC" variable to the script, so you can build -# webalizer without any dependencies at all. -# -# small changes by rhatto -# -# Run 'sh SlackBuild --cleanup' to build a Slackware package. -# The package (.tgz) plus descriptive .txt file are created in /tmp . -# Install using 'installpkg'. -# -# ----------------------------------------------------------------------------- - -# --- INIT --- -# Set initial variables: -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# change STATIC to anything other than "yes" to enable dynamic build. -STATIC=${STATIC:-no} - -[ "$STATIC" == "yes" ] && \ - PRGNAM=webalizer_static || \ - PRGNAM=webalizer - -SRCNAM="webalizer" -SRCVER="2.01-10" -VERSION=${VERSION:=2.01.10} -ARCH=${ARCH:-i486} -BUILD=${BUILD:=1rha} -PACKAGE="$PRGNAM" -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -DOCS="CHANGES COPYING Copyright DNS.README INSTALL README README.FIRST country-codes.txt" - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="tgz" -SRC="$SRCNAM-$SRCVER-src.$PACKAGE_EXT" -URL="ftp://ftp.mrunix.net/pub/webalizer/$SRC" - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -if [ "$ARCH" = "i386" ]; then - SLKCFLAGS="-O2 -march=i386 -mcpu=i686" -elif [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mcpu=i686" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2" -fi - -TMP="$TMP/$PACKAGE" -PKG=$TMP/package-$PRGNAM -rm -rf $TMP -mkdir -p $PKG - -# --- PACKAGE BUILDING --- - -echo "++" -echo "|| $PRGNAM-$VERSION" -echo "++" - -cd $PKG - -# Explode the package framework: -if [ -f $CWD/_$PRGNAM.tar.gz ]; then - explodepkg $CWD/_$PRGNAM.tar.gz -fi - -cd $TMP - -# --- TARBALL EXTRACTION,PATCH,MODIFY --- - -echo "Extracting the program sources for $PRGNAM..." -tar xvf$tarflag $SRC_DIR/$SRC - -mv ${SRCNAM}-${SRCVER} ${PRGNAM}-${SRCVER} -cd ${PRGNAM}-${SRCVER} - -chown -R root.root * - -# --- BUILDING --- - -echo Building ... - -CPPFLAGS="-I/usr/include/db4" \ -CFLAGS="$SLKCFLAGS $CPPFLAGS" \ -./configure --prefix=/usr \ - --localstatedir=/var \ - --sysconfdir=/etc \ - --with-db=/usr/include/db4 \ - --with-dblib=/lib \ - --libdir=$LIBDIR \ - --enable-dns \ - $([ "$STATIC" == "yes" ] && echo "--enable-static" || echo "") \ - 2>&1 | tee $TMP/configure-${PRGNAM}.log -make 2>&1 | tee $TMP/make-${PRGNAM}.log - -# -# Install all the needed stuff to the package dir -# -mkdir -p $PKG/etc -mkdir -p $PKG/usr/bin -mkdir -p $PKG/usr/man/man1 - -# Use installwatch if available: -which installwatch > /dev/null 2>&1 -if [ $? == 0 ]; then - installwatch -o $TMP/install-${PRGNAM}.log \ - make BINDIR=$PKG/usr/bin MANDIR=$PKG/usr/man/man1 ETCDIR=$PKG/etc install -else - make BINDIR=$PKG/usr/bin MANDIR=$PKG/usr/man/man1 ETCDIR=$PKG/etc install \ - 2>&1 |tee $TMP/install-${PRGNAM}.log -fi - - -# --- DOCUMENTATION --- - -mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a $DOCS \ - $PKG/usr/doc/$PRGNAM-$VERSION -chmod -R a-w $PKG/usr/doc/$PRGNAM-$VERSION/* - -# Compress the man page(s) -find $PKG/usr/man -type f -name "*.?" -exec gzip -9f {} \; - -# Strip binaries -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) - - -# --- OWNERSHIP, RIGHTS --- - -chmod -R o-w $PKG - -# --- PACKAGE DESCRIPTION --- - -mkdir -p $PKG/install -cat $CWD/$([ "$STATIC" == "yes" ] && echo "$PRGNAM." || echo "")slack-desc > $PKG/install/slack-desc - -if [ -f $CWD/doinst.sh ]; then - cat $CWD/doinst.sh > $PKG/install/doinst.sh -else - echo '( if [ ! -f "/etc/webalizer.conf" ]; then mv /etc/webalizer.conf.sample /etc/webalizer.conf; fi )' > $PKG/install/doinst.sh -fi - -# --- BUILDING --- - -# Build the package: -cd $PKG -makepkg --linkadd y --chown n $REPOS/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz \ - 2>&1 | tee $TMP/makepkg-${PRGNAM}.log -#(cd $REPOS && md5sum ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz > ${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.tgz.md5) -#cat $PKG/install/slack-desc | grep "^${PRGNAM}" > $REPOS/${PRGNAM}-${VERSION}-${ARCH}-${BUILD}.txt - -# --- CLEANUP --- - -# Clean up the extra stuff: -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/network/webalizer/webalizer_static.slack-desc b/network/webalizer/webalizer_static.slack-desc deleted file mode 100644 index 5cbc29d8..00000000 --- a/network/webalizer/webalizer_static.slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -webalizer_static: webalizer (webserver log analysis) -webalizer_static: -webalizer_static: The Webalizer is a fast, free web server log file analysis -webalizer_static: program. It produces highly detailed, easily configurable -webalizer_static: usage reports in HTML format, for viewing with a standard web -webalizer_static: browser. -webalizer_static: This package contains a statically linked binary. -webalizer_static: -webalizer_static: -webalizer_static: webalizer lives at http://www.mrunix.net/webalizer/ -webalizer_static: |