diff options
Diffstat (limited to 'net/chat')
| -rwxr-xr-x | net/chat/bitlbee/bitlbee.SlackBuild | 132 | ||||
| -rw-r--r-- | net/chat/bitlbee/slack-required | 2 | ||||
| -rwxr-xr-x | net/chat/ekiga/ekiga.SlackBuild | 119 | ||||
| -rw-r--r-- | net/chat/ekiga/slack-required | 3 | ||||
| -rwxr-xr-x | net/chat/lirc/lirc.SlackBuild | 122 |
5 files changed, 0 insertions, 378 deletions
diff --git a/net/chat/bitlbee/bitlbee.SlackBuild b/net/chat/bitlbee/bitlbee.SlackBuild deleted file mode 100755 index 47713be6..00000000 --- a/net/chat/bitlbee/bitlbee.SlackBuild +++ /dev/null @@ -1,132 +0,0 @@ -#!/bin/bash -# -# slackbuild script for bitlbee -# by rhatto at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building bitlbee are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap -# else -# echo Sleeping 3 seconds... -# sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="bitlbee" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=1.0.3} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - export LDFLAGS="-L/lib64 -L/usr/lib64" - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://get.bitlbee.org/src/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --etcdir=/etc/bitlbee --libdir=$LIBDIR - -if [ "$ARCH" == "x86_64" ]; then - cat Makefile.settings | sed -e 's/^LFLAGS=$/LFLAGS=-L\/lib64 -L\/usr\/lib64 -liconv/' > Makefile.settings.new - mv Makefile.settings.new Makefile.settings -fi - -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -mkdir -p $TMP/package-$PACKAGE/etc/bitlbee -cp $CWD/bitlbee.conf $TMP/package-$PACKAGE/etc/bitlbee/bitlbee.conf.dist - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -bitlbee: bitlbee (An IRC to other chat networks gateway) -bitlbee: -bitlbee: BitlBee allows users to talk to people on the MSN, ICQ, Jabber, -bitlbee: Yahoo!, and AIM networks with any IRC client by emulating an IRC -bitlbee: server. A virtual channel is created with all of the user's buddies -bitlbee: in it, who can be talked to in the channel or in a query. -bitlbee: -bitlbee: -bitlbee: -bitlbee: -bitlbee: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION -cp $CWD/COPYING usr/doc/$PACKAGE-$VERSION - -for file in AUTHORS CHANGES CREDITS FAQ INSTALL README; do - cp $CWD/doc/$file* usr/doc/$PACKAGE-$VERSION/ -done - -# install script -echo '( if [ ! -f "etc/bitlbee/bitlbee.conf" ]; then mv etc/bitlbee/bitlbee.conf.dist etc/bitlbee/bitlbee.conf; fi )' > install/doinst.sh - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/net/chat/bitlbee/slack-required b/net/chat/bitlbee/slack-required deleted file mode 100644 index 196e8fce..00000000 --- a/net/chat/bitlbee/slack-required +++ /dev/null @@ -1,2 +0,0 @@ -gnutls -libiconv diff --git a/net/chat/ekiga/ekiga.SlackBuild b/net/chat/ekiga/ekiga.SlackBuild deleted file mode 100755 index 0c43d9c6..00000000 --- a/net/chat/ekiga/ekiga.SlackBuild +++ /dev/null @@ -1,119 +0,0 @@ -#!/bin/bash -# -# slackbuild script for ekiga -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building ekiga are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap -# else -# echo Sleeping 3 seconds... -# sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="ekiga" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=2.0.3} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - export LDFLAGS="-L/lib64 -L/usr/lib64" - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://www.ekiga.org/admin/downloads/latest/sources/sources/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --disable-gnome --disable-avahi --sysconfdir=/etc --libdir=$LIBDIR -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -ekiga: ekiga (Ekiga is a VoIP softphone) -ekiga: -ekiga: Ekiga (formely known as GnomeMeeting) is an open source VoIP and -ekiga: video conferencing application for GNOME. Ekiga uses both the H.323 -ekiga: and SIP protocols. It supports many audio and video codecs, and is -ekiga: interoperable with other SIP compliant software and also with -ekiga: Microsoft NetMeeting. -ekiga: -ekiga: -ekiga: http://www.ekiga.org/ -ekiga: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in AUTHORS COPYING ChangeLog FAQ INSTALL NEWS README TODO;do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/net/chat/ekiga/slack-required b/net/chat/ekiga/slack-required deleted file mode 100644 index df2d09b1..00000000 --- a/net/chat/ekiga/slack-required +++ /dev/null @@ -1,3 +0,0 @@ -openldap-client -pwlib -opal diff --git a/net/chat/lirc/lirc.SlackBuild b/net/chat/lirc/lirc.SlackBuild deleted file mode 100755 index 13268723..00000000 --- a/net/chat/lirc/lirc.SlackBuild +++ /dev/null @@ -1,122 +0,0 @@ -#!/bin/bash -# -# slackbuild script for lirc -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building lirc are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap -# else -# echo Sleeping 3 seconds... -# sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="lirc" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=0.8.1pre2} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - export LDFLAGS="-L/lib64 -L/usr/lib64" - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -# ------- error codes for createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 -ERROR_PATCH=40 - -RTOOL="wget" -PACKAGE_EXT="bz2" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://lirc.sourceforge.net/software/snapshots/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf $SRC_DIR/$SRC || exit $ERROR_TAR -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff || exit $ERROR_PATCH -fi - -# Warning, building without any driver!! -./configure --prefix=/usr --with-driver=none --enable-sandbox --sysconfdir=/etc --libdir=$LIBDIR || exit $ERROR_CONF -make || exit $ERROR_MAKE -make DESTDIR=$TMP/package-$PACKAGE install || exit $ERROR_INSTALL - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -lirc: lirc -lirc: -lirc: LIRC is a package that allows you to decode and send infra-red -lirc: signals of many (but not all) commonly used remote controls. -lirc: -lirc: -lirc: -lirc: -lirc: -lirc: http://www.lirc.org/ -lirc: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -DOCS="ANNOUNCE AUTHORS COPYING ChangeLog INSTALL NEWS README TODO" - -for file in $DOCS; do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - |