1 files changed, 207 insertions, 0 deletions
diff --git a/media/gfx/jhead/jhead.SlackBuild b/media/gfx/jhead/jhead.SlackBuild
new file mode 100644
index 00000000..137c0c02
--- /dev/null
+++ b/media/gfx/jhead/jhead.SlackBuild
@@ -0,0 +1,207 @@
+#!/bin/bash
+#
+#  jhead.SlackBuild is free software; you can redistribute
+#  it and/or modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of the License,
+#  or any later version.
+#
+#  jhead.SlackBuild is distributed in the hope that it will
+#  be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General
+#  Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License along
+#  with this program; if not, write to the Free Software Foundation, Inc.,
+#  59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+#
+# slackbuild for jhead, by Silvio Rhatto
+# requires:  
+# tested: jhead-2.84
+#
+
+# Look for slackbuildrc
+if [ -f ~/.slackbuildrc ]; then
+  source ~/.slackbuildrc
+elif [ -f /etc/slackbuildrc ]; then
+  source /etc/slackbuildrc
+fi
+
+# Set variables
+CWD="$(pwd)"
+SRC_NAME="jhead"
+PKG_NAME="jhead"
+ARCH=${ARCH:=i486}
+SRC_VERSION=${VERSION:=2.84}
+PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')"
+BUILD=${BUILD:=1rha}
+SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME
+TMP=${TMP:=/tmp}
+PKG=${PKG:=$TMP/package-$PKG_NAME}
+REPOS=${REPOS:=$TMP}
+PREFIX=${PREFIX:=/usr}
+PKG_WORK="$TMP/$SRC_NAME"
+CONF_OPTIONS=${CONF_OPTIONS:=""}
+NUMJOBS=${NUMJOBS:=""}
+
+# Set system libraries' path and optmization flags based on $ARCH
+LIBDIR="$PREFIX/lib"
+
+if [ "$ARCH" = "i386" ]; then
+  SLKCFLAGS="-O2 -march=i386 -mcpu=i686"
+elif [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mcpu=i686"
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIR="$PREFIX/lib64"
+  LDFLAGS="-L/lib64 -L/usr/lib64"
+fi
+
+# Set error codes (used by createpkg)
+ERROR_WGET=31;      ERROR_MAKE=32;      ERROR_INSTALL=33
+ERROR_MD5=34;       ERROR_CONF=35;      ERROR_HELP=36
+ERROR_TAR=37;       ERROR_MKPKG=38;     ERROR_GPG=39
+ERROR_PATCH=40;     ERROR_VCS=41;       ERROR_MKDIR=42
+ERROR_MANIFEST=43;
+
+# Clean up any leftovers of previous builds
+rm -rf "$PKG_WORK" 2> /dev/null
+rm -rf "$PKG" 2> /dev/null
+
+# Create directories if necessary
+mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR
+mkdir -p "$PKG" || exit $ERROR_MKDIR
+mkdir -p "$REPOS" || exit $ERROR_MKDIR
+mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR
+
+# Dowload source if necessary
+SRC="$SRC_NAME-$VERSION.tar.gz"
+URL="http://www.sentex.net/~mwandel/jhead/$SRC"
+
+if [ ! -s "$SRC_DIR/$SRC" ] || ! gunzip -t "$SRC_DIR/$SRC" 2> /dev/null; then
+  wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET
+fi
+
+# Check Manifest file
+if [ -e "$CWD/Manifest" ]; then
+
+  MANIFEST_LINES="`grep -E -v "^(MKBUILD|SLACKBUILD)" $CWD/Manifest | wc -l`"
+
+  for ((MANIFEST_COUNT=1; MANIFEST_COUNT <= $MANIFEST_LINES; MANIFEST_COUNT++)); do
+
+    MANIFEST_LINE="`grep -E -v "^(MKBUILD|SLACKBUILD)" $CWD/Manifest | head -n $MANIFEST_COUNT | tail -n 1`"
+    MANIFEST_FILE="`echo $MANIFEST_LINE | awk '{ print $2 }'`"
+    MANIFEST_FILE_TYPE="`echo $MANIFEST_LINE | awk '{ print $1 }'`"
+
+    if [ -e "$SRC_DIR/$MANIFEST_FILE" ]; then
+      MANIFEST_FILE="$SRC_DIR/$MANIFEST_FILE"
+    else
+      MANIFEST_FILE="`find $CWD -name $MANIFEST_FILE`"
+    fi
+
+    if [ ! -e "$MANIFEST_FILE" ] || [ -d "$MANIFEST_FILE" ]; then
+      continue
+    fi
+
+    echo "Checking Manifest for $MANIFEST_FILE_TYPE $MANIFEST_FILE integrity..."
+
+    SIZE_SRC="`wc -c $MANIFEST_FILE | awk '{ print $1 }'`"
+    SIZE_MANIFEST="`echo $MANIFEST_LINE | awk '{ print $3 }'`"
+
+    # Check source code size
+    if [ "$SIZE_SRC" != "$SIZE_MANIFEST" ]; then
+      echo "SIZE Manifest: $SIZE_MANIFEST; SIZE $SRC: $SIZE_SRC"
+      exit $ERROR_MANIFEST
+    else
+      echo "Size match."
+    fi
+
+    # Check source code integrity
+    for ALGO in md5 sha1 sha256 sha512 rmd160; do
+      if [ $ALGO = "rmd160" ]; then
+        ALGO_SRC="`openssl rmd160 $MANIFEST_FILE | awk '{ print $2 }'`"
+      else
+        ALGO_SRC="`"$ALGO"sum $MANIFEST_FILE | awk '{ print $1 }'`"
+      fi
+      ALGO="`echo $ALGO | tr '[:lower:]' '[:upper:]'`"
+      ALGO_MANIFEST=$(echo $MANIFEST_LINE | sed "s/.* $ALGO //" | awk '{ print $1 }')
+      if [ "$ALGO_SRC" != "$ALGO_MANIFEST" ]; then
+        echo "$ALGO Manifest: $ALGO_MANIFEST; $ALGO $SRC: $ALGO_SRC"
+        exit $ERROR_MANIFEST
+      else
+        echo "$ALGO match."
+      fi
+    done
+
+  done
+
+else
+  exit $ERROR_MANIFEST
+fi
+
+# Untar
+cd "$PKG_WORK"
+tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR
+PKG_SRC="$PWD/`ls -l | awk '/^d/ { print $NF }'`"
+cd "$PKG_SRC"
+
+# Compile
+make $NUMJOBS || exit $ERROR_MAKE
+
+# Install
+mkdir -p $PKG/usr/bin
+cp jhead $PKG/usr/bin
+chmod 755 $PKG/usr/bin/jhead
+
+# Strip binaries
+( cd "$PKG"
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Install documentation
+DOCS="readme.txt changes.txt usage.html"
+mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR
+for doc in $DOCS; do
+  if [ -f "$doc" ]; then
+    cp -a $doc "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION"
+  fi
+done
+
+# Add package description (slack-desc)
+mkdir -p "$PKG/install" || exit $ERROR_MKDIR
+cat << EODESC > "$PKG/install/slack-desc"
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description. Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in. You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':'.
+
+     |-----handy-ruler--------------------------------------------------------|
+jhead: jhead
+jhead:
+jhead: Jhead is a command line driven program for manipulating the
+jhead: non-image parts of Exif flavour JPEG files that most digital
+jhead: cameras produce.
+jhead:
+jhead:
+jhead:
+jhead:
+jhead:
+jhead:
+EODESC
+
+# Build the package
+cd "$PKG"
+makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG
+
+# Delete source and build directories if requested
+if [ "$CLEANUP" == "yes" ] || [ "$1" = "--cleanup" ]; then
+  rm -rf "$PKG_WORK" "$PKG"
+fi