diff options
Diffstat (limited to 'libs')
43 files changed, 0 insertions, 5251 deletions
diff --git a/libs/liba52/liba52.SlackBuild b/libs/liba52/liba52.SlackBuild deleted file mode 100755 index 6a1d81af..00000000 --- a/libs/liba52/liba52.SlackBuild +++ /dev/null @@ -1,119 +0,0 @@ -#!/bin/bash -# -# slackbuild script for liba52 -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building liba52 are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="liba52" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=0.7.4} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - export CFLAGS=-fPIC - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://liba52.sourceforge.net/files/a52dec-$VERSION.tar.$PACKAGE_EXT" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd a52dec-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --enable-shared --enable-double --sysconfdir=/etc --libdir=$LIBDIR --with-docdir=/usr/doc/$PACKAGE-$VERSION -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -liba52: liba52 (liba52 is a free ATSC A/52 stream decoder) -liba52: -liba52: liba52 is a free library for decoding ATSC A/52 streams. It is -liba52: released under the terms of the GPL license. The A/52 standard is -liba52: used in a variety of applications, including digital television and -liba52: DVD. It is also known as AC-3. -liba52: -liba52: -liba52: -liba52: http://liba52.sourceforge.net/ -liba52: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in AUTHORS COPYING ChangeLog HISTORY INSTALL NEWS README TODO;do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libavc1394/libavc1394.SlackBuild b/libs/libavc1394/libavc1394.SlackBuild deleted file mode 100755 index 72fee6f4..00000000 --- a/libs/libavc1394/libavc1394.SlackBuild +++ /dev/null @@ -1,118 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libavc1394 -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libavc1394 are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libavc1394" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=0.5.3} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://ufpr.dl.sourceforge.net/sourceforge/libavc1394/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libavc1394: libavc1394 (libavc1394 is a programming interface for the 1394 AV/C) -libavc1394: -libavc1394: LibAVC1394 is a programming interface for the 1394 Trade -libavc1394: Association AV/C (Audio/Video Control) Digital Interface Command -libavc1394: Set. It is intended for use with GNU/Linux IEEE-1394 -libavc1394: (http://linux1394.sourceforge.net/). -libavc1394: -libavc1394: -libavc1394: -libavc1394: http://libavc1394.sourceforge.net/ -libavc1394: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in ChangeLog COPYING AUTHORS INSTALL README NEWS TODO;do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libavc1394/slack-required b/libs/libavc1394/slack-required deleted file mode 100644 index 8bc743d3..00000000 --- a/libs/libavc1394/slack-required +++ /dev/null @@ -1 +0,0 @@ -libraw1394 diff --git a/libs/libdc1394/libdc1394.SlackBuild b/libs/libdc1394/libdc1394.SlackBuild deleted file mode 100755 index 0cf6a716..00000000 --- a/libs/libdc1394/libdc1394.SlackBuild +++ /dev/null @@ -1,118 +0,0 @@ -#!/bin/bash -# -# slackbuild script for pwlib -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libdc1394 are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libdc1394" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=1.2.1} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://ufpr.dl.sourceforge.net/sourceforge/libdc1394/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR --with-docdir=/usr/doc/$PACKAGE-$VERSION -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libdc1394: libdc1394 (Libdc1394 is a library for control of 1394 cameras) -libdc1394: -libdc1394: libdc1394 is a library that is intended to provide a high level -libdc1394: programming interface for application developers who wish to control -libdc1394: IEEE 1394 based cameras that conform to the 1394-based Digital Camera -libdc1394: Specification (found at http://www.1394ta.org/). -libdc1394: -libdc1394: -libdc1394: -libdc1394: http://damien.douxchamps.net/ieee1394/libdc1394/ -libdc1394: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in AUTHORS COPYING ChangeLog INSTALL NEWS README;do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libdc1394/slack-required b/libs/libdc1394/slack-required deleted file mode 100644 index 8bc743d3..00000000 --- a/libs/libdc1394/slack-required +++ /dev/null @@ -1 +0,0 @@ -libraw1394 diff --git a/libs/libdv/libdv-0.104.diff b/libs/libdv/libdv-0.104.diff deleted file mode 100644 index 6d1ef4e5..00000000 --- a/libs/libdv/libdv-0.104.diff +++ /dev/null @@ -1,1383 +0,0 @@ ---- libdv-0.104.orig/debian/copyright -+++ libdv-0.104/debian/copyright -@@ -0,0 +1,34 @@ -+This package was debianized by Daniel Kobras <kobras@debian.org> on -+Sat, 10 Feb 2001 17:54:56 +0100. -+ -+It was downloaded from -+ -+ http://download.sourceforge.net/libdv/ -+ -+Upstream Authors: -+ Erik Walthinsen <omega@cse.ogi.edu> -+ Charles 'Buck' Krasic <krasic@acm.org> -+ -+Copyright: -+ -+ (c) 1999-2001 -+ Erik Walthinsen <omega@cse.ogi.edu> -+ Charles 'Buck' Krasic <krasic@acm.org> -+ -+ Individual files also contain material subject to the following -+ copyrights: -+ -+ (c) 2000-2004 James Bowman -+ (c) 2001-2004 Peter Schlaile, Dan Dennedy -+ (c) 1999 Aaron Holtzman -+ (c) 2001 Daniel Maas -+ (c) 1999,2000 Sebastien Rougeaux -+ (c) 2000 Oregon Graduate Institute of Science & Technology -+ -+ All program source code is distributed under the terms of the -+ GNU Lesser General Public License, Version 2.1 or later, -+ see /usr/share/common-licenses/LGPL-2.1. -+ -+ The man pages are distributed under the terms of the GNU General -+ Public License, Version 2 or later, see -+ /usr/share/common-licenses/GPL. ---- libdv-0.104.orig/debian/libdv-bin.install -+++ libdv-0.104/debian/libdv-bin.install -@@ -0,0 +1,2 @@ -+/usr/bin/* -+/usr/share/man/*/* ---- libdv-0.104.orig/debian/libdv-bin.links -+++ libdv-0.104/debian/libdv-bin.links -@@ -0,0 +1 @@ -+usr/share/doc/libdv4 usr/share/doc/libdv-bin ---- libdv-0.104.orig/debian/libdv-bin.manpages -+++ libdv-0.104/debian/libdv-bin.manpages -@@ -0,0 +1,4 @@ -+playdv/playdv.1 -+encodedv/encodedv.1 -+encodedv/dvconnect.1 -+encodedv/dubdv.1 ---- libdv-0.104.orig/debian/libdv4-dev.NEWS -+++ libdv-0.104/debian/libdv4-dev.NEWS -@@ -0,0 +1,15 @@ -+libdv (0.103-1) unstable; urgency=low -+ -+ Earlier versions of libdv had deprecated the use of header file dv1394.h -+ provided here. Starting with version 0.103, the libdv developers have -+ removed the header file entirely from their package. Compiling software -+ that still includes the deprecated header shall fail now, therefore. -+ -+ Note that the dv1394.h has never been part of the libdv programming interface -+ and has been provided as a (historical) courtesy only. dv1394.h defines -+ solely a kernel interface. Therefore, in order to compile for a certain -+ kernel version, the kernel headers, and only the kernel headers contain the -+ authoritative header file. All application software should be modified -+ accordingly. -+ -+ -- Daniel Kobras <kobras@debian.org> Thu, 15 Jul 2004 17:52:38 +0200 ---- libdv-0.104.orig/debian/libdv4-dev.install -+++ libdv-0.104/debian/libdv4-dev.install -@@ -0,0 +1,5 @@ -+/usr/lib/*.a -+/usr/lib/*.la -+/usr/lib/*.so -+/usr/lib/pkgconfig/*.pc -+/usr/include/* ---- libdv-0.104.orig/debian/libdv4.docs -+++ libdv-0.104/debian/libdv4.docs -@@ -0,0 +1,6 @@ -+AUTHORS -+NEWS -+README -+README.encoder -+README.dvconnect -+TODO ---- libdv-0.104.orig/debian/libdv4.install -+++ libdv-0.104/debian/libdv4.install -@@ -0,0 +1 @@ -+/usr/lib/*.so.* ---- libdv-0.104.orig/debian/rules -+++ libdv-0.104/debian/rules -@@ -0,0 +1,122 @@ -+#!/usr/bin/make -f -+# Sample debian/rules that uses debhelper. -+# GNU copyright 1997 to 1999 by Joey Hess. -+ -+# Uncomment this to turn on verbose mode. -+#export DH_VERBOSE=1 -+ -+# This is the debhelper compatability version to use. -+export DH_COMPAT=4 -+ -+include /usr/share/dpatch/dpatch.make -+ -+# shared library versions, option 1 -+#version=2.0.5 -+#major=2 -+# option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so -+#version=`ls libdv/.libs/lib*.so.* | \ -+# awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'` -+#major=`ls libdv/.libs/lib*.so.* | \ -+# awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'` -+ -+export DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) -+export DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) -+ifeq ($(DEB_BUILD_GNU_TYPE), $(DEB_HOST_GNU_TYPE)) -+ libdv_confflags += --build $(DEB_HOST_GNU_TYPE) -+else -+ libdv_confflags += --build $(DEB_BUILD_GNU_TYPE) --host $(DEB_HOST_GNU_TYPE) -+endif -+ -+ -+CFLAGS ?= -Wall -g -+ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) -+CFLAGS += -O0 -+else -+CFLAGS += -O2 -+endif -+ -+configure: configure-stamp -+configure-stamp: -+ dh_testdir -+ # Make sure we use the latest autotools helpers. -+ if test -f config.sub; then \ -+ mv config.sub config.sub.debsave; \ -+ fi -+ if test -f config.guess; then \ -+ mv config.guess config.guess.debsave; \ -+ fi -+ -+ ln -sf /usr/share/misc/config.sub . -+ ln -sf /usr/share/misc/config.guess . -+ -+ CFLAGS="$(CFLAGS)" ./configure $(libdv_confflags) \ -+ --prefix=/usr --mandir=\$${prefix}/share/man \ -+ --infodir=\$${prefix}/share/info --enable-sdl -+ -+ touch configure-stamp -+ -+build: patch-stamp configure-stamp build-stamp -+build-stamp: -+ dh_testdir -+ -+ $(MAKE) -+ -+ touch build-stamp -+ -+clean: do-clean unpatch -+do-clean: -+ dh_testdir -+ dh_testroot -+ rm -f build-stamp configure-stamp -+ -+ -$(MAKE) distclean -+ -+ if test -L config.sub -a -e config.sub.debsave; then \ -+ rm config.sub; \ -+ if test -e config.sub.debsave; then \ -+ mv config.sub.debsave config.sub; \ -+ fi; \ -+ fi -+ if test -L config.guess -a -e config.guess.debsave; then \ -+ rm config.guess; \ -+ if test -e config.guess.debsave; then \ -+ mv config.guess.debsave config.guess; \ -+ fi; \ -+ fi -+ -+ dh_clean -+ -+install: build -+ dh_testdir -+ dh_testroot -+ dh_clean -k -+ dh_installdirs -+ -+ $(MAKE) install DESTDIR=`pwd`/debian/tmp/ -+ -+ -+# Build architecture-independent files here. -+binary-indep: build install -+# We have nothing to do by default. -+ -+# Build architecture-dependent files here. -+binary-arch: build install -+ dh_testdir -+ dh_testroot -+ dh_install -A --sourcedir=debian/tmp # --list-missing -+ dh_installman -+ dh_link -A -+ dh_installdocs -plibdv4 -plibdv4-dev -+ dh_installchangelogs ChangeLog -+ dh_strip -+ dh_compress -+ dh_fixperms -+ dh_makeshlibs -+ dh_installdeb -+ dh_shlibdeps -L libdv4 -l debian/libdv4/usr/lib -+ dh_gencontrol -+ dh_md5sums -+ dh_builddeb -+ -+binary: binary-indep binary-arch -+.PHONY: build clean binary-indep binary-arch binary install configure patch unpatch do-clean ---- libdv-0.104.orig/debian/changelog -+++ libdv-0.104/debian/changelog -@@ -0,0 +1,315 @@ -+libdv (0.104-1ubuntu2) dapper; urgency=low -+ -+ * Remove build-dependency on gcc-3.4 [amd64], not used anymore. -+ -+ -- Matthias Klose <doko@ubuntu.com> Thu, 16 Feb 2006 12:37:12 +0000 -+ -+libdv (0.104-1ubuntu1) dapper; urgency=low -+ -+ * Resynchronise with Debian. -+ -+ -- Tollef Fog Heen <tfheen@ubuntu.com> Mon, 14 Nov 2005 17:00:34 +0100 -+ -+libdv (0.104-1) unstable; urgency=low -+ -+ * New upstream version. Closes: #298366 -+ * Picks up new libsdl1.2 version to complete various library -+ transitions. Closes: #318237, #320882, #321549 -+ * Added patches: -+ + [01_changelog_update_CVS] New, from upstream CVS. -+ Add 0.104 changelog entry that is not part of the released 0.104 -+ tarball, so subsequent patches from upstream CVS can be applied -+ without modification. -+ + [10_amd64_linkage_fix_CVS] New, from upstream CVS. -+ Fix linker compatibility problems in amd64 assembly. -+ + [10_inline_fixes_CVS] New, from upstream CVS. -+ Fix build problems when compiler does not honour the inline hint. -+ + [20_no_exec_stack_CVS] New, from upstream CVS. -+ Add linker magic so assembly functions do no longer require an -+ executable stack. -+ * Updated patches: -+ + [10_zap_config_h] -+ Extend to take care of amd64 optimisations. -+ * debian/control: Complies with standards version 3.6.2. -+ * debian/rules: Export overridden CFLAGS. Closes: #306488 -+ -+ -- Daniel Kobras <kobras@debian.org> Wed, 17 Aug 2005 17:23:18 +0200 -+ -+libdv (0.103-2ubuntu1) breezy; urgency=low -+ -+ * debian/control: added gcc-3.4 to build-depends for compiling issues on -+ amd64. -+ -+ -- Stephan Hermann <sh@sourcecode.de> Thu, 25 Aug 2005 08:34:55 +0200 -+ -+libdv (0.103-2build1) breezy; urgency=low -+ -+ * Rebuild for slang2 transition -+ -+ -- Stephan Hermann <sh@sourcecode.de> Wed, 24 Aug 2005 20:56:34 +0200 -+ -+libdv (0.103-2) unstable; urgency=low -+ -+ * debian/rules: Provide separate doc directory for libdv4-dev. -+ * debian/libdv4-dev.links: No longer symlink doc dir to the one -+ from libdv4. -+ * debian/NEWS: Only install into libdv4-dev. Closes: #259694 -+ -+ -- Daniel Kobras <kobras@debian.org> Mon, 19 Jul 2004 12:19:44 +0200 -+ -+libdv (0.103-1) unstable; urgency=low -+ -+ * New upstream version. -+ * Removed patches: -+ + [10_dvconnect_disable_swap] Merged upstream. -+ + [10_no_gtk_deps] Merged upstream. -+ + [10_fix_wide_format] Merged upstream. -+ * debian/NEWS: Notify about removal of previously deprecated header -+ file dv1394.h. -+ * debian/control: Adjust build dependencies following the xlibs split. -+ -+ -- Daniel Kobras <kobras@debian.org> Thu, 15 Jul 2004 17:53:16 +0200 -+ -+libdv (0.102-4) unstable; urgency=low -+ -+ * Added patches: -+ + [10_fix_wide_format] New. -+ Fix detection of 16:9 (wide) format in non-SMPTE streams. -+ Closes: #248660 -+ -+ -- Daniel Kobras <kobras@debian.org> Thu, 13 May 2004 17:51:59 +0200 -+ -+libdv (0.102-3) unstable; urgency=low -+ -+ * Added patches: -+ + [10_no_gtk_deps] New. -+ Remove glib and gtk dependencies from the pkgconfig file. -+ Closes: #245037 -+ -+ -- Daniel Kobras <kobras@debian.org> Wed, 21 Apr 2004 09:51:55 +0200 -+ -+libdv (0.102-2) unstable; urgency=low -+ -+ * Upload to unstable. -+ -+ -- Daniel Kobras <kobras@debian.org> Tue, 20 Apr 2004 09:34:20 +0200 -+ -+libdv (0.102-1) experimental; urgency=low -+ -+ * New upstream version. -+ + Bumps library soname because of binary incompatibility. Still -+ source-level compatible, though. -+ + New API functions dv_format_letterbox(), and dv_is_normal_speed(). -+ * debian/*: Rename library packages libdv2 -> libdv4, and -+ libdv2-dev -> libdv4-dev, following the soname change. -+ * debian/rules: Remove shlibs version as we're changing the package name -+ anyway. -+ -+ -- Daniel Kobras <kobras@debian.org> Sun, 28 Mar 2004 23:52:01 +0200 -+ -+libdv (0.101-1) unstable; urgency=low -+ -+ * New upstream version. -+ * Added patches: -+ + [10_zap_config_h] New. -+ Remove dependency of dv_types.h on config.h. Replace with standard -+ guesses that will do for the scope of the Debian package. -+ Closes: #199878 -+ + [11_move_config_h_to_apps] New. -+ As a consequence of the above patch, a couple of source files now need -+ to include config.h themselves. -+ + [10_dvconnect_disable_swap] New. -+ In dvconnect, keep all pages in resident memory if possible because -+ swapping kills performance. Closes: #222498 -+ * debian/control: Remove leading "A" from short description. -+ * debian/control: Bump standards version. -+ * debian/control: Build depend on dpatch. -+ * debian/copyright: Updated copyright assignments. -+ * debian/libdv-bin.manpages: dvconnect.1 now available upstream, new man -+ page dubdv.1. -+ * debian/NEWS: Warn about dv1394.h update. -+ * debian/rules: Bump shlibs to >= 0.101 as this version introduces new -+ API functions. -+ * debian/rules: Convert build system to dpatch. -+ * debian/rules: Improved config.guess/config.sub backup logic. -+ -+ -- Daniel Kobras <kobras@debian.org> Tue, 20 Jan 2004 00:13:07 +0100 -+ -+libdv (0.99-3) unstable; urgency=low -+ -+ * debian/control: Oops. Priority for -dev and -bin package back to extra. -+ -+ -- Daniel Kobras <kobras@debian.org> Sun, 13 Apr 2003 15:24:02 +0200 -+ -+libdv (0.99-2) unstable; urgency=low -+ -+ * debian/control: Adjust priority to optional. Build depend on file. -+ * configure: Change deplibs check to pass_all on mips and mipsel. -+ Closes: #188682. -+ -+ -- Daniel Kobras <kobras@debian.org> Sun, 13 Apr 2003 14:25:31 +0200 -+ -+libdv (0.99-1) unstable; urgency=low -+ -+ * New upstream version -+ * libdv/audio.c: Fix typo in audio emphasis handling. [From upstream CVS] -+ * libdv/enc_output.c: Fix aaux header in encoder output. [From upstream CVS] -+ * debian/rules: Add versioned shlibs dependency because of new audio -+ sample calculator. -+ * debian/rules: Drop debug from DEB_BUILD_OPTIONS, support noopt. -+ * debian/rules: Supply configure with proper build target. -+ * debian/control: Remove full stop from short description. -+ * debian/control: Bump standards version. -+ * debian/control: libdv2-dev now lives in section libdevel. -+ * debian/*: New binary dvconnect. -+ * debian/dvconnect.1: Quick man page for dvconnect. -+ -+ -- Daniel Kobras <kobras@debian.org> Tue, 1 Apr 2003 16:58:18 +0200 -+ -+libdv (0.98-6) unstable; urgency=low -+ -+ * Namespace cleanup: -+ + libdv/*.c: Mark a batch of local symbols as static. -+ + libdv/*.[hcS]: Prefix intra-lib symbols with _dv_. -+ + encodedv/*.c: Honour internal name changes. -+ -+ -- Daniel Kobras <kobras@debian.org> Tue, 10 Dec 2002 01:34:29 +0100 -+ -+libdv (0.98-5) unstable; urgency=low -+ -+ * debian/control: Need to tighten debhelper build dep for dh_shlibdeps -L -+ flag. Closes: #170993 -+ * debian/control: Complies with standards version 3.5.8. -+ -+ -- Daniel Kobras <kobras@debian.org> Thu, 28 Nov 2002 10:02:20 +0100 -+ -+libdv (0.98-4) unstable; urgency=low -+ -+ * configure.ac, */Makefile.am: Do not push any lib into LIBS. Define -+ separate macros instead, and only add to the appropriate targets. -+ Closes: #167098 -+ * configure.ac: While libdv pulls a types from libpopt, it does not -+ reference any libpopt function. Adding -lpopt to REQUIRES_NOPKGCONFIG was -+ nonsense therefore--it's a purely optional feature. (The dependency on -+ libpopt-dev must be retained, however, because dv_types.h includes -+ popt.h.) -+ * Update auto-generated files because of the above. -+ -+ -- Daniel Kobras <kobras@debian.org> Wed, 30 Oct 2002 18:41:48 +0100 -+ -+libdv (0.98-3) unstable; urgency=low -+ -+ * ChangeLog, libdv/dv1394.h, libdv/encode.c, libdv/enc_audio_input.[hc]: -+ Sync with upstream CVS as of 2002-10-27. Solely adds a more complete fix -+ to the PAL overflow issue. The previously included change alone caused -+ occiasional crashes still. -+ * debian/README.Debian: YUY bug turned out to be an Xv bug really, that is -+ now fixed. Nothing to document any longer, file removed. -+ * debian/rules: Tell dh_shlibdeps to use generated libdv2 shlibs file. -+ -+ -- Daniel Kobras <kobras@debian.org> Sun, 27 Oct 2002 14:11:58 +0100 -+ -+libdv (0.98-2) unstable; urgency=low -+ -+ * libdv/dv_types.h: Fix potential overflow in audio buffer with PAL -+ frames. (From upstream CVS.) -+ -+ -- Daniel Kobras <kobras@debian.org> Sun, 11 Aug 2002 23:40:57 +0200 -+ -+libdv (0.98-1) unstable; urgency=low -+ -+ * New upstream release. -+ * Build a shared lib now--PIC issues seem to be resolved. -+ * debian/control: Split into separate packages for runtime lib, devel -+ files, and sample binaries. Name of the devel package now includes -+ major version. Provides libdv-dev for compatibility. Suggest to move -+ source package from devel to section graphics. -+ * debian/copyright: Updated copyright entries. Rename encode to -+ encodedv. -+ * debian/rules: Move to debhelper v4. Honour package split. Build a -+ shared lib now. Add support for 'debug' in DEB_BUILD_OPTIONS. -+ * debian/README.Debian: Document YUY bug on some big-endian hardware. -+ Remove obsolete comment about absence to shared libs. -+ -+ -- Daniel Kobras <kobras@debian.org> Thu, 1 Aug 2002 10:23:20 +0200 -+ -+libdv (0.9.5-3) unstable; urgency=low -+ -+ * libdv.pc.in: Remove obsolete dependencies on glib and gtk. Hack in -+ library dependency on popt. Closes: #149901 -+ * debian/control: Depend on libpopt-dev. -+ -+ -- Daniel Kobras <kobras@debian.org> Thu, 27 Jun 2002 11:02:56 +0200 -+ -+libdv (0.9.5-2) unstable; urgency=low -+ -+ * dv.c: Tell C version of dv_macroblock_yuv() about additional arguments -+ to YUY2 functions. -+ * idct_248.c: Fix types in C version of fixed_multiply(). -+ * enc_input.c: Purge remaining glib types from C versions of f2b() and -+ f2sb. -+ * All of the above fix compile errors on non-x86. Closes: #142770 -+ -+ -- Daniel Kobras <kobras@debian.org> Sun, 14 Apr 2002 14:05:05 +0200 -+ -+libdv (0.9.5-1) unstable; urgency=low -+ -+ * New upstream version. -+ This version is supposed to also work as a shared lib, but let's -+ keep the package static-only until woody is released, and we have -+ time to properly test this change. -+ -+ -- Daniel Kobras <kobras@debian.org> Sat, 13 Apr 2002 17:35:34 +0200 -+ -+libdv (0.9-2) unstable; urgency=low -+ -+ * Rebuild with libsdl1.2debian. (No code changes necessary.) -+ * Do not clobber upstream config.guess/config.sub. -+ * Configure with explicit host and build architecture as suggested in -+ autotools-dev README. -+ * Added note to package description explaining why there is no shared -+ version of the lib. -+ * Increased standards version. -+ -+ -- Daniel Kobras <kobras@debian.org> Wed, 17 Oct 2001 14:12:46 +0200 -+ -+libdv (0.9-1) unstable; urgency=low -+ -+ * New upstream version. -+ * Include auto-generated dependencies in control (doh!). Closes: #103016 -+ * Always use latest autotools helpers. -+ * Versioned build dependency on libsdl1.2-dev. Autobuilders would choke -+ on earlier versions. -+ -+ -- Daniel Kobras <kobras@debian.org> Tue, 31 Jul 2001 17:23:28 +0200 -+ -+libdv (0.8-2) unstable; urgency=low -+ -+ * Fix compilation in non-asm mode. Closes: #96804 -+ -+ -- Daniel Kobras <kobras@debian.org> Wed, 9 May 2001 09:20:49 +0200 -+ -+libdv (0.8-1) unstable; urgency=low -+ -+ * New upstream version. -+ -+ -- Daniel Kobras <kobras@debian.org> Fri, 4 May 2001 19:55:35 +0200 -+ -+libdv (0.7-2) unstable; urgency=low -+ -+ * Some MMX code in encode.c wasn't wrapped in ARCH_X86 conditionals. -+ Closes: #94521 -+ * Build with SDL support. -+ -+ -- Daniel Kobras <kobras@debian.org> Fri, 20 Apr 2001 09:42:53 +0200 -+ -+libdv (0.7-1) unstable; urgency=low -+ -+ * Initial Release. Closes: #89510 -+ * Renamed encode to encodedv. -+ * Added man pages for playdv and encodedv. -+ * Fixed bogus space in dv option string. -+ * Fixed missing time.h include in headers.c. -+ -+ -- Daniel Kobras <kobras@debian.org> Thu, 12 Apr 2001 20:48:56 +0200 -+ ---- libdv-0.104.orig/debian/patches/00list -+++ libdv-0.104/debian/patches/00list -@@ -0,0 +1,6 @@ -+01_changelog_update_CVS -+10_amd64_linkage_fix_CVS -+10_inline_fixes_CVS -+10_zap_config_h -+11_move_config_h_to_apps -+20_no_exec_stack_CVS ---- libdv-0.104.orig/debian/patches/10_zap_config_h.dpatch -+++ libdv-0.104/debian/patches/10_zap_config_h.dpatch -@@ -0,0 +1,103 @@ -+#!/bin/sh -e -+## 10_zap_config_h.dpatch by Daniel Kobras <kobras@debian.org> -+## -+## All lines beginning with `## DP:' are a description of the patch. -+## DP: dv_types.h is part of the libdv API that has to be included -+## DP: in application code. Therefore, it may not reference libdv's -+## DP: private config.h. -+## DP: Of course, config.h was included for a reason, and this patch -+## DP: tries to cover it up, because at least in the scope of the -+## DP: Debian package we can reliably guess at the contents of config.h. -+ -+if [ $# -lt 1 ]; then -+ echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" -+ exit 1 -+fi -+ -+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts -+patch_opts="${patch_opts:--f --no-backup-if-mismatch}" -+ -+case "$1" in -+ -patch) patch $patch_opts -p1 < $0;; -+ -unpatch) patch $patch_opts -p1 -R < $0;; -+ *) -+ echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" -+ exit 1;; -+esac -+ -+exit 0 -+ -+@DPATCH@ -+diff -urNad --exclude=CVS --exclude=.svn ./libdv/dv_types.h /tmp/dpep-work.X4gSie/libdv/libdv/dv_types.h -+--- ./libdv/dv_types.h 2005-07-10 19:31:16.000000000 +0200 -++++ /tmp/dpep-work.X4gSie/libdv/libdv/dv_types.h 2005-07-10 19:58:28.000000000 +0200 -+@@ -26,10 +26,11 @@ -+ #ifndef DV_TYPES_H -+ #define DV_TYPES_H -+ -+-#if HAVE_CONFIG_H -+-# include <config.h> -+-#endif -+- -++/* The Debian package is always compiled with popt support, but using it -++ * in an application is optional. Declare HAVE_LIBPOPT before including -++ * the libdv headers in order to access popt-specific entries in the -++ * libdv API. -++ */ -+ #if HAVE_LIBPOPT -+ #include <popt.h> -+ #endif // HAVE_LIBPOPT -+@@ -38,11 +39,11 @@ -+ #include <inttypes.h> -+ #include <stdio.h> -+ #include <time.h> -+-#if HAVE_ENDIAN_H -++/* FIXME Some systems use machine/endian.h instead. We probably ought to -++ * AC_SUBST the correct value in here. (Or use a namespace-clean dvconfig.h.) -++ * This quick fix should do for glibc-based systems. -++ */ -+ #include <endian.h> -+-#elif HAVE_MACHINE_ENDIAN_H -+-#include <machine/endian.h> -+-#endif -+ -+ /* please tell me these are defined somewhere standard??? */ -+ #ifndef FALSE -+@@ -61,16 +62,33 @@ -+ #define CLAMP(a,x,b) (MIN(b,MAX(a,x))) -+ #endif -+ -++/* FIXME These values indicate whether libdv was built with asm optimizations. -++ * It had better be AC_SUBSTed, but for the purpose of the Debian package, we -++ * can easily guess the correct value from standard compiler macros. -++ */ -++#if !defined(ARCH_X86) && !defined(ARCH_X86_64) -++# if defined (__x86_64) -++# define ARCH_X86 0 -++# define ARCH_X86_64 1 -++# elif defined(i386) -++# define ARCH_X86 1 -++# define ARCH_X86_64 0 -++# else -++# define ARCH_X86 0 -++# define ARCH_X86_64 0 -++# endif -++#endif -++ -+ // For now assume ARCH_X86 means GCC with hints. -+ #ifdef ARCH_X86 -+-#define HAVE_GCC 1 -++#define LIBDV_HAVE_GCC 1 -+ #endif -+ #ifdef ARCH_X86_64 -+-#define HAVE_GCC 1 -++#define LIBDV_HAVE_GCC 1 -+ #endif -+-//#define HAVE_GCC 0 -++//#define LIBDV_HAVE_GCC 0 -+ -+-#if HAVE_GCC -++#if LIBDV_HAVE_GCC -+ #define ALIGN64 __attribute__ ((aligned (64))) -+ #define ALIGN32 __attribute__ ((aligned (32))) -+ #define ALIGN8 __attribute__ ((aligned (8))) ---- libdv-0.104.orig/debian/patches/11_move_config_h_to_apps.dpatch -+++ libdv-0.104/debian/patches/11_move_config_h_to_apps.dpatch -@@ -0,0 +1,54 @@ -+#!/bin/sh -e -+## 11_move_config_h_to_apps.dpatch by Daniel Kobras <kobras@debian.org> -+## -+## All lines beginning with `## DP:' are a description of the patch. -+## DP: Removing inclusion of config.h from dv_types.h revealed two -+## DP: files that should include it themselves. -+ -+if [ $# -lt 1 ]; then -+ echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" -+ exit 1 -+fi -+ -+[ -f debian/patches/00patch-opts ] && . debian/patches/00patch-opts -+patch_opts="${patch_opts:--f --no-backup-if-mismatch}" -+ -+case "$1" in -+ -patch) patch $patch_opts -p1 < $0;; -+ -unpatch) patch $patch_opts -p1 -R < $0;; -+ *) -+ echo >&2 "`basename $0`: script expects -patch|-unpatch as argument" -+ exit 1;; -+esac -+ -+exit 0 -+ -+@DPATCH@ -+diff -urNad /home/kobras/src/debian/libdv/encodedv/encodedv.c libdv/encodedv/encodedv.c -+--- /home/kobras/src/debian/libdv/encodedv/encodedv.c 2004-01-19 13:06:49.000000000 +0100 -++++ libdv/encodedv/encodedv.c 2004-01-19 23:58:45.000000000 +0100 -+@@ -24,6 +24,10 @@ -+ * The libdv homepage is http://libdv.sourceforge.net/. -+ */ -+ -++#ifdef HAVE_CONFIG_H -++#include <config.h> -++#endif -++ -+ #include <string.h> -+ #include "libdv/dv_types.h" -+ #include "libdv/dv.h" -+diff -urNad /home/kobras/src/debian/libdv/encodedv/insert_audio.c libdv/encodedv/insert_audio.c -+--- /home/kobras/src/debian/libdv/encodedv/insert_audio.c 2004-01-19 13:06:49.000000000 +0100 -++++ libdv/encodedv/insert_audio.c 2004-01-19 23:59:22.000000000 +0100 -+@@ -23,6 +23,10 @@ -+ * The libdv homepage is http://libdv.sourceforge.net/. -+ */ -+ -++#ifdef HAVE_CONFIG_H -++#include <config.h> -++#endif -++ -+ #include "libdv/dv_types.h" -+ -+ #include <stdio.h> ---- libdv-0.104.orig/debian/patches/01_changelog_update_CVS.dpatch -+++ libdv-0.104/debian/patches/01_changelog_update_CVS.dpatch -@@ -0,0 +1,35 @@ -+#! /bin/sh /usr/share/dpatch/dpatch-run -+## 01_changelog_update_CVS.dpatch by Daniel Kobras <kobras@debian.org> -+## -+## All lines beginning with `## DP:' are a description of the patch. -+## DP: Include 0.104 changelog entry that is not part of released 0.104 -+## DP: tarball. This is done so we can apply subsequent patches pristine -+## DP: from CVS without failing hunks because of the missing changelog -+## DP: entry. -+## DP: (Part of patch set 286 from upstream CVS. Unneeded updates to -+## DP: autogenerated files have been omitted.) -+ -+@DPATCH@ -+--------------------- -+PatchSet 286 -+Date: 2004/11/30 03:39:35 -+Author: krasic -+Branch: HEAD -+Tag: libdv_0_104 -+Log: -+0.104 release build -+ -+Members: -+ ChangeLog:1.108->1.109 -+ -+Index: libdv/ChangeLog -+diff -u libdv/ChangeLog:1.108 libdv/ChangeLog:1.109 -+--- libdv/ChangeLog:1.108 Mon Nov 29 17:44:55 2004 -++++ libdv/ChangeLog Mon Nov 29 19:39:35 2004 -+@@ -1,3 +1,6 @@ -++2004-11-29 Charles "Buck" Krasic <krasic@acm.org> -++ * libdv 0.104 release -++ -+ 2004-11-29 Dan Dennedy <dan@dennedy.org> -+ * libdv.pc: added -lm to make build more portable. -+ ---- libdv-0.104.orig/debian/patches/10_amd64_linkage_fix_CVS.dpatch -+++ libdv-0.104/debian/patches/10_amd64_linkage_fix_CVS.dpatch -@@ -0,0 +1,302 @@ -+#! /bin/sh /usr/share/dpatch/dpatch-run -+## 10_amd64_linkage_fix_CVS.dpatch by Daniel Kobras <kobras@debian.org> -+## -+## All lines beginning with `## DP:' are a description of the patch. -+## DP: Fix linker compatibility issues with amd64 assembly. (Dean Kolosiek) -+## DP: (Patch set 287 from upstream CVS.) -+ -+@DPATCH@ -+--------------------- -+PatchSet 287 -+Date: 2004/12/13 01:48:50 -+Author: ddennedy -+Branch: HEAD -+Tag: (none) -+Log: -+fix linkage problems in x86_64 asm code -+ -+Members: -+ ChangeLog:1.109->1.110 -+ libdv/encode_x86_64.S:1.2->1.3 -+ libdv/idct_block_mmx_x86_64.S:1.1->1.2 -+ libdv/quant_x86_64.S:1.2->1.3 -+ libdv/vlc_x86_64.S:1.1->1.2 -+ -+Index: libdv/ChangeLog -+diff -u libdv/ChangeLog:1.109 libdv/ChangeLog:1.110 -+--- libdv/ChangeLog:1.109 Mon Nov 29 19:39:35 2004 -++++ libdv/ChangeLog Sun Dec 12 17:48:50 2004 -+@@ -1,3 +1,7 @@ -++2004-12-12 Dan Dennedy <dan@dennedy.org> -++ * *_x86_64.S: apply patch from Dean Kolosiek to fix linker -++ compatibility. -++ -+ 2004-11-29 Charles "Buck" Krasic <krasic@acm.org> -+ * libdv 0.104 release -+ -+Index: libdv/libdv/encode_x86_64.S -+diff -u libdv/libdv/encode_x86_64.S:1.2 libdv/libdv/encode_x86_64.S:1.3 -+--- libdv/libdv/encode_x86_64.S:1.2 Tue Nov 16 19:36:30 2004 -++++ libdv/libdv/encode_x86_64.S Sun Dec 12 17:48:51 2004 -+@@ -47,7 +47,8 @@ -+ -+ mov $63, %rcx # loop counter -+ -+- mov vlc_encode_lookup(%rip), %r11 -++ mov vlc_encode_lookup@GOTPCREL(%rip), %r11 -++ mov (%r11),%r11 -+ -+ pxor %mm0, %mm0 -+ pxor %mm2, %mm2 -+@@ -129,7 +130,8 @@ -+ add $2, %rdi /* skip the DC coefficient */ -+ mov $63, %rcx -+ -+- mov vlc_num_bits_lookup(%rip), %r11 -++ mov vlc_num_bits_lookup@GOTPCREL(%rip), %r11 -++ mov (%r11),%r11 -+ -+ vlc_num_bits_block_x86_loop: -+ movw (%rdi), %ax /* get the next coeffiecient */ -+Index: libdv/libdv/idct_block_mmx_x86_64.S -+diff -u libdv/libdv/idct_block_mmx_x86_64.S:1.1 libdv/libdv/idct_block_mmx_x86_64.S:1.2 -+--- libdv/libdv/idct_block_mmx_x86_64.S:1.1 Tue Oct 19 20:49:24 2004 -++++ libdv/libdv/idct_block_mmx_x86_64.S Sun Dec 12 17:48:51 2004 -+@@ -22,7 +22,7 @@ -+ /* void _dv_idct_88(dv_coeff_t *block) */ -+ /* argument block=rdi */ -+ -+- lea preSC(%rip), %r11 -++ mov preSC@GOTPCREL(%rip), %r11 -+ -+ /* -+ * column 0: even part -+Index: libdv/libdv/quant_x86_64.S -+diff -u libdv/libdv/quant_x86_64.S:1.2 libdv/libdv/quant_x86_64.S:1.3 -+--- libdv/libdv/quant_x86_64.S:1.2 Tue Nov 16 19:36:30 2004 -++++ libdv/libdv/quant_x86_64.S Sun Dec 12 17:48:51 2004 -+@@ -73,10 +73,10 @@ -+ /* pq = dv_quant_shifts[qno + dv_quant_offset[class]]; */ -+ mov %rsi,%rax /* qno */ -+ mov %rdx,%r12 /* class */ -+- lea dv_quant_offset(%rip),%rcx -++ mov dv_quant_offset@GOTPCREL(%rip),%rcx -+ movzbq (%rcx,%r12,1),%rcx /* dv_quant_offset[class] */ -+ add %rcx,%rax /* qno + */ -+- lea dv_quant_shifts(%rip),%r11 -++ mov dv_quant_shifts@GOTPCREL(%rip),%r11 -+ lea (%r11,%rax,4),%r11 /* r11 is pq = dv_quant_shifts[...] */ -+ -+ /* extra = (class == 3); */ -+@@ -217,10 +217,10 @@ -+ mov %rsi,%rax /* qno */ -+ mov %rdx,%r12 /* class */ -+ -+- lea dv_quant_offset(%rip),%rcx -++ mov dv_quant_offset@GOTPCREL(%rip),%rcx -+ movzbq (%rcx,%r12,1),%rcx -+ add %rcx,%rax -+- lea dv_quant_shifts(%rip),%r11 -++ mov dv_quant_shifts@GOTPCREL(%rip),%r11 -+ lea (%r11,%rax,4),%r11 /* r11 is pq */ -+ -+ /* extra = (class == 3); */ -+Index: libdv/libdv/vlc_x86_64.S -+diff -u libdv/libdv/vlc_x86_64.S:1.1 libdv/libdv/vlc_x86_64.S:1.2 -+--- libdv/libdv/vlc_x86_64.S:1.1 Tue Oct 19 20:49:24 2004 -++++ libdv/libdv/vlc_x86_64.S Sun Dec 12 17:48:51 2004 -+@@ -16,28 +16,28 @@ -+ /* klass = dv_vlc_classes[maxbits][(bits & (dv_vlc_class_index_mask[maxbits])) >> */ -+ /* (dv_vlc_class_index_rshift[maxbits])]; */ -+ /* xor %rbp,%rbp */ -+- lea dv_vlc_class_index_mask(%rip),%r11 /* use %rip for PIC code */ -++ mov dv_vlc_class_index_mask@GOTPCREL(%rip),%r11 /* use %rip for PIC code */ -+ mov (%r11,%rbx,4),%ebp /* int32 */ /* dv_vlc_class_index_mask[maxbits] */ -+ and %eax,%ebp /* bits & */ -+- lea dv_vlc_class_index_rshift(%rip),%rcx -++ mov dv_vlc_class_index_rshift@GOTPCREL(%rip),%rcx -+ mov (%rcx,%rbx,4),%ecx /* int32 */ /* dv_vlc_class_index_rshift[maxbits] */ -+ sar %cl,%ebp /* >> */ -+- lea dv_vlc_classes(%rip),%rcx -++ mov dv_vlc_classes@GOTPCREL(%rip),%rcx -+ mov (%rcx,%rbx,8),%rcx /* ptr */ /* dv_vlc_classes[maxbits], a pointer */ -+ movsbq (%rcx,%rbp,1),%rbp /* int8 */ /* klass = */ -+ -+ /* *result = dv_vlc_lookups[klass][(bits & (dv_vlc_index_mask[klass])) >> */ -+ /* (dv_vlc_index_rshift[klass])]; */ -+ /* xor %rbx,%rbx */ -+- lea dv_vlc_index_mask(%rip),%r11 -++ mov dv_vlc_index_mask@GOTPCREL(%rip),%r11 -+ mov (%r11,%rbp,4),%ebx /* int32 */ /* (dv_vlc_index_mask[klass]) */ -+ /* xor %rcx,%rcx */ -+- lea dv_vlc_index_rshift(%rip),%r11 -++ mov dv_vlc_index_rshift@GOTPCREL(%rip),%r11 -+ mov (%r11,%rbp,4),%ecx /* int32 */ /* dv_vlc_index_rshift[klass] */ -+ and %eax,%ebx /* bits & */ -+ sar %cl,%ebx /* >> */ -+ -+- lea dv_vlc_lookups(%rip),%r11 -++ mov dv_vlc_lookups@GOTPCREL(%rip),%r11 -+ mov (%r11,%rbp,8),%rbp /* ptr */ /* dv_vlc_lookups[klass] */ -+ mov (%rbp,%rbx,4),%ebp /* int32 */ /* *result = */ -+ -+@@ -57,7 +57,7 @@ -+ mov %ebp,%ecx -+ sar $8,%ecx -+ and $0xff,%ecx /* result->len */ -+- lea sign_mask(%rip),%rbx -++ mov sign_mask@GOTPCREL(%rip),%rbx -+ mov (%rbx,%rcx,4),%ebx /* int32 */ -+ and %ebx,%eax -+ neg %eax -+@@ -109,17 +109,17 @@ -+ mov %rax,%rbp -+ and $0xfe00,%ebp -+ sar $9,%ebp -+- lea dv_vlc_class_lookup5(%rip),%r11 -++ mov dv_vlc_class_lookup5@GOTPCREL(%rip),%r11 -+ movsbq (%r11,%rbp),%rbp /* int8 klass */ -+ -+- lea dv_vlc_index_mask(%rip),%rbx -++ mov dv_vlc_index_mask@GOTPCREL(%rip),%rbx -+ mov (%rbx,%rbp,4),%ebx /* int32 */ -+- lea dv_vlc_index_rshift(%rip),%rcx -++ mov dv_vlc_index_rshift@GOTPCREL(%rip),%rcx -+ mov (%rcx,%rbp,4),%ecx /* int32 */ -+ and %eax,%ebx -+ sar %cl,%ebx /* %rbx is klass */ -+ -+- lea dv_vlc_lookups(%rip),%r11 -++ mov dv_vlc_lookups@GOTPCREL(%rip),%r11 -+ mov (%r11,%rbp,8),%rbp /* ptr */ -+ mov (%rbp,%rbx,4),%ebp /* int32 */ -+ -+@@ -138,7 +138,7 @@ -+ mov %ebp,%ecx -+ sar $8,%ecx -+ and $0xff,%ecx -+- lea sign_mask(%rip),%r11 -++ mov sign_mask@GOTPCREL(%rip),%r11 -+ mov (%r11,%rcx,4),%ecx /* int32 */ -+ and %ecx,%eax -+ neg %eax -+@@ -253,7 +253,7 @@ -+ -+ /* Attempt to use the shortcut first. If it hits, then -+ this vlc term has been decoded. */ -+- lea dv_vlc_class1_shortcut(%rip),%r10 -++ mov dv_vlc_class1_shortcut@GOTPCREL(%rip),%r10 -+ mov (%r10,%rcx,4),%r11d /* record32 dv_vlc_tab_t */ -+ test $0x80,%r11d -+ -+@@ -267,17 +267,17 @@ -+ -+ /* %rax is bits */ -+ -+- lea dv_vlc_class_lookup5(%rip),%r10 -++ mov dv_vlc_class_lookup5@GOTPCREL(%rip),%r10 -+ movsbq (%r10,%rcx,1),%rcx /* int8 */ -+ -+ /* xor %r12,%r12 */ -+- lea dv_vlc_index_mask(%rip),%r10 -++ mov dv_vlc_index_mask@GOTPCREL(%rip),%r10 -+ mov (%r10,%rcx,4),%r12d /* int32 */ -+ -+- lea dv_vlc_lookups(%rip),%r10 -++ mov dv_vlc_lookups@GOTPCREL(%rip),%r10 -+ mov (%r10,%rcx,8),%r11 /* ptr->record32 */ -+ -+- lea dv_vlc_index_rshift(%rip),%r10 -++ mov dv_vlc_index_rshift@GOTPCREL(%rip),%r10 -+ mov (%r10,%rcx,4),%ecx /* int32 */ -+ -+ and %eax,%r12d -+@@ -303,7 +303,7 @@ -+ mov %r11d,%ecx -+ sar $8,%ecx -+ and $0xff,%ecx -+- lea sign_mask(%rip),%r10 -++ mov sign_mask@GOTPCREL(%rip),%r10 -+ mov (%r10,%rcx,4),%ecx /* int32 */ -+ and %ecx,%eax -+ neg %eax -+@@ -388,7 +388,8 @@ -+ mov %r11,%rsi /* bits */ -+ mov %rax,%rdi /* bits_left */ -+ lea vlc(%rip),%rdx /* *vlc */ -+- call dv_decode_vlc -++ mov dv_decode_vlc@GOTPCREL(%rip),%r11 -++ call *%r11 -+ pop %rdx -+ pop %rsi -+ pop %rdi -+@@ -473,7 +474,7 @@ -+ movl %r11d,dv_macroblock_t_eob_count(%r13) /* int32 */ -+ -+ /* mb->i = (seg->i + dv_super_map_vertical[m]) % (seg->isPAL?12:10); */ -+- lea dv_super_map_vertical(%rip),%r11 -++ mov dv_super_map_vertical@GOTPCREL(%rip),%r11 -+ movl (%r11,%rax,4),%r11d /* int32 */ -+ /* xor %rcx,%rcx */ -+ movl dv_videosegment_t_i(%r12),%ecx /* int32 */ -+@@ -493,7 +494,7 @@ -+ movl %r11d,dv_macroblock_t_i(%r13) /* int32 */ -+ -+ /* mb->j = dv_super_map_horizontal[m]; */ -+- lea dv_super_map_horizontal(%rip),%r11 -++ mov dv_super_map_horizontal@GOTPCREL(%rip),%r11 -+ movl (%r11,%rax,4),%r11d /* int32 */ -+ movl %r11d,dv_macroblock_t_j(%r13) /* int32 */ -+ -+@@ -546,7 +547,8 @@ -+ -+ /* bl->reorder = &dv_reorder[bl->dct_mode][1]; */ -+ shl $6,%rax /* *64 */ -+- lea (dv_reorder+1)(%rip),%rcx -++ mov dv_reorder@GOTPCREL(%rip),%rcx -++ add $1,%rcx -+ add %rcx,%rax -+ mov %rax,dv_block_t_reorder(%r15) /* ptr */ -+ -+@@ -557,13 +559,13 @@ -+ /* bl->offset= mb_start + dv_parse_bit_start[b]; */ -+ /* xor %rcx,%rcx */ -+ movl mb_start(%rip),%ecx /* int32 */ -+- lea dv_parse_bit_start(%rip),%rax -++ mov dv_parse_bit_start@GOTPCREL(%rip),%rax -+ mov (%rax,%r12,4),%eax /* int32 */ -+ add %rcx,%rax -+ movl %eax,dv_block_t_offset(%r15) /* int32 */ -+ -+ /* bl->end= mb_start + dv_parse_bit_end[b]; */ -+- lea dv_parse_bit_end(%rip),%rax -++ mov dv_parse_bit_end@GOTPCREL(%rip),%rax -+ mov (%rax,%r12,4),%eax /* int32 */ -+ add %ecx,%eax -+ mov %eax,dv_block_t_end(%r15) /* int32 */ -+@@ -603,7 +605,8 @@ -+ mov dv_videosegment_t_bs(%rdi),%rdi /* passed in rdi was seg, now passing seg->bs */ -+ mov %r13,%rsi /* mb */ -+ mov %r15,%rdx /* bl */ -+- call dv_parse_ac_coeffs_pass0 -++ mov dv_parse_ac_coeffs_pass0@GOTPCREL(%rip),%r11 -++ call *%r11 -+ pop %rdi -+ pop %rsi -+ pop %rdx -+@@ -635,10 +638,12 @@ -+ mov %rsi,%rax /* quality */ -+ and $DV_QUALITY_AC_MASK,%rax -+ cmp $DV_QUALITY_AC_2,%rax -++ -++ jne done -++ mov dv_parse_ac_coeffs@GOTPCREL(%rip),%r11 -++ jmp *%r11 -+ -+- jz dv_parse_ac_coeffs -+- -+- mov $0,%rax -++done: mov $0,%rax -+ -+ ret -+ ---- libdv-0.104.orig/debian/patches/10_inline_fixes_CVS.dpatch -+++ libdv-0.104/debian/patches/10_inline_fixes_CVS.dpatch -@@ -0,0 +1,69 @@ -+#! /bin/sh /usr/share/dpatch/dpatch-run -+## 10_inline_fixes_CVS.dpatch by Daniel Kobras <kobras@debian.org> -+## -+## All lines beginning with `## DP:' are a description of the patch. -+## DP: Fix build problems when compiler does not honour the inline hint. -+## DP: (Patch set 288 from upstream CVS.) -+ -+@DPATCH@ -+--------------------- -+PatchSet 288 -+Date: 2004/12/21 05:08:02 -+Author: ddennedy -+Branch: HEAD -+Tag: (none) -+Log: -+convert extern inline to static inline -+ -+Members: -+ ChangeLog:1.110->1.111 -+ libdv/mmx.h:1.2->1.3 -+ libdv/vlc.h:1.6->1.7 -+ -+Index: libdv/ChangeLog -+diff -u libdv/ChangeLog:1.110 libdv/ChangeLog:1.111 -+--- libdv/ChangeLog:1.110 Sun Dec 12 17:48:50 2004 -++++ libdv/ChangeLog Mon Dec 20 21:08:02 2004 -+@@ -1,3 +1,7 @@ -++2004-12-20 Dan Dennedy <dan@dennedy.org> -++ * vlc.h, mmx.h: apply patch from Daniel Kobras to improve -++ compile compatibillity by making extern inlinei, static inline.. -++ -+ 2004-12-12 Dan Dennedy <dan@dennedy.org> -+ * *_x86_64.S: apply patch from Dean Kolosiek to fix linker -+ compatibility. -+Index: libdv/libdv/mmx.h -+diff -u libdv/libdv/mmx.h:1.2 libdv/libdv/mmx.h:1.3 -+--- libdv/libdv/mmx.h:1.2 Sat Oct 27 20:23:57 2001 -++++ libdv/libdv/mmx.h Mon Dec 20 21:08:03 2004 -+@@ -59,7 +59,7 @@ -+ -+ /* Function to test if multimedia instructions are supported... -+ */ -+-inline extern int -++inline static int -+ mm_support(void) -+ { -+ /* Returns 1 if MMX instructions are supported, -+@@ -223,7 +223,7 @@ -+ -+ /* Function to test if mmx instructions are supported... -+ */ -+-inline extern int -++inline static int -+ mmx_ok(void) -+ { -+ /* Returns 1 if MMX instructions are supported, 0 otherwise */ -+Index: libdv/libdv/vlc.h -+diff -u libdv/libdv/vlc.h:1.6 libdv/libdv/vlc.h:1.7 -+--- libdv/libdv/vlc.h:1.6 Mon Oct 20 12:46:50 2003 -++++ libdv/libdv/vlc.h Mon Dec 20 21:08:04 2004 -+@@ -69,7 +69,7 @@ -+ extern void dv_decode_vlc(int bits,int maxbits, dv_vlc_t *result); -+ extern void __dv_decode_vlc(int bits, dv_vlc_t *result); -+ -+-extern __inline__ void dv_peek_vlc(bitstream_t *bs,int maxbits, dv_vlc_t *result) { -++static inline void dv_peek_vlc(bitstream_t *bs,int maxbits, dv_vlc_t *result) { -+ if(maxbits < 16) -+ dv_decode_vlc(bitstream_show(bs,16),maxbits,result); -+ else ---- libdv-0.104.orig/debian/patches/20_no_exec_stack_CVS.dpatch -+++ libdv-0.104/debian/patches/20_no_exec_stack_CVS.dpatch -@@ -0,0 +1,207 @@ -+#! /bin/sh /usr/share/dpatch/dpatch-run -+## 20_no_exec_stack_CVS.dpatch by Daniel Kobras <kobras@debian.org> -+## -+## All lines beginning with `## DP:' are a description of the patch. -+## DP: Alter assembler functions to not require an executable stack. -+## DP: (Nicholas Miell) -+## DP: (Part of patch set 289 from upstream CVS. Removed unrelated -+## DP: changes to libtool in same patch set.) -+ -+@DPATCH@ -+--------------------- -+PatchSet 289 -+Date: 2005/01/31 13:27:53 -+Author: ddennedy -+Branch: HEAD -+Tag: (none) -+Log: -+remove execution stack from assembler functions -+ -+Members: -+ ChangeLog:1.111->1.112 -+ libdv/dct_block_mmx.S:1.3->1.4 -+ libdv/dct_block_mmx_x86_64.S:1.1->1.2 -+ libdv/encode_x86.S:1.3->1.4 -+ libdv/encode_x86_64.S:1.3->1.4 -+ libdv/idct_block_mmx.S:1.2->1.3 -+ libdv/idct_block_mmx_x86_64.S:1.2->1.3 -+ libdv/quant_x86.S:1.3->1.4 -+ libdv/quant_x86_64.S:1.3->1.4 -+ libdv/rgbtoyuv.S:1.5->1.6 -+ libdv/rgbtoyuv_x86_64.S:1.1->1.2 -+ libdv/transpose_x86.S:1.2->1.3 -+ libdv/transpose_x86_64.S:1.1->1.2 -+ libdv/vlc_x86.S:1.2->1.3 -+ libdv/vlc_x86_64.S:1.2->1.3 -+ -+Index: libdv/ChangeLog -+diff -u libdv/ChangeLog:1.111 libdv/ChangeLog:1.112 -+--- libdv/ChangeLog:1.111 Mon Dec 20 21:08:02 2004 -++++ libdv/ChangeLog Mon Jan 31 05:27:53 2005 -+@@ -1,3 +1,7 @@ -++2005-01-31 Dan Dennedy <dan@dennedy.org> -++ * *.S: apply patch from Nicholas Miell <nmiell@gmail.com> -++ to not require execution stack for assembler functions. -++ -+ 2004-12-20 Dan Dennedy <dan@dennedy.org> -+ * vlc.h, mmx.h: apply patch from Daniel Kobras to improve -+ compile compatibillity by making extern inlinei, static inline.. -+Index: libdv/libdv/dct_block_mmx_x86_64.S -+diff -u libdv/libdv/dct_block_mmx_x86_64.S:1.1 libdv/libdv/dct_block_mmx_x86_64.S:1.2 -+--- libdv/libdv/dct_block_mmx_x86_64.S:1.1 Tue Oct 19 20:49:24 2004 -++++ libdv/libdv/dct_block_mmx_x86_64.S Mon Jan 31 05:27:54 2005 -+@@ -53,6 +53,8 @@ -+ scratch3: .quad 0 -+ scratch4: .quad 0 -+ -++.section .note.GNU-stack, "", @progbits -++ -+ .text -+ -+ .align 8 -+Index: libdv/libdv/encode_x86.S -+diff -u libdv/libdv/encode_x86.S:1.3 libdv/libdv/encode_x86.S:1.4 -+--- libdv/libdv/encode_x86.S:1.3 Mon Oct 20 12:46:50 2003 -++++ libdv/libdv/encode_x86.S Mon Jan 31 05:27:54 2005 -+@@ -27,6 +27,9 @@ -+ ALLONE: .word 1,1,1,1 -+ VLCADDMASK: .byte 255,0,0,0,255,0,0,0 -+ -++ -++.section .note.GNU-stack, "", @progbits -++ -+ .text -+ -+ .global _dv_vlc_encode_block_mmx -+Index: libdv/libdv/encode_x86_64.S -+diff -u libdv/libdv/encode_x86_64.S:1.3 libdv/libdv/encode_x86_64.S:1.4 -+--- libdv/libdv/encode_x86_64.S:1.3 Sun Dec 12 17:48:51 2004 -++++ libdv/libdv/encode_x86_64.S Mon Jan 31 05:27:54 2005 -+@@ -27,6 +27,8 @@ -+ ALLONE: .word 1,1,1,1 -+ VLCADDMASK: .byte 255,0,0,0,255,0,0,0 -+ -++.section .note.GNU-stack, "", @progbits -++ -+ .text -+ -+ .global _dv_vlc_encode_block_mmx_x86_64 -+Index: libdv/libdv/idct_block_mmx.S -+diff -u libdv/libdv/idct_block_mmx.S:1.2 libdv/libdv/idct_block_mmx.S:1.3 -+--- libdv/libdv/idct_block_mmx.S:1.2 Tue Dec 31 15:04:02 2002 -++++ libdv/libdv/idct_block_mmx.S Mon Jan 31 05:27:54 2005 -+@@ -6,7 +6,7 @@ -+ * (element[0][0] of the matrix) -+ */ -+ -+- -++.section .note.GNU-stack, "", @progbits -+ -+ .text -+ .align 4 -+Index: libdv/libdv/idct_block_mmx_x86_64.S -+diff -u libdv/libdv/idct_block_mmx_x86_64.S:1.2 libdv/libdv/idct_block_mmx_x86_64.S:1.3 -+--- libdv/libdv/idct_block_mmx_x86_64.S:1.2 Sun Dec 12 17:48:51 2004 -++++ libdv/libdv/idct_block_mmx_x86_64.S Mon Jan 31 05:27:54 2005 -+@@ -13,6 +13,7 @@ -+ /* If we're using MMX assembler, fold weights into the iDCT -+ prescale here instead of _dv_weight_init */ -+ -++.section .note.GNU-stack, "", @progbits -+ -+ .text -+ .align 4 -+Index: libdv/libdv/quant_x86.S -+diff -u libdv/libdv/quant_x86.S:1.3 libdv/libdv/quant_x86.S:1.4 -+--- libdv/libdv/quant_x86.S:1.3 Mon Oct 20 12:46:50 2003 -++++ libdv/libdv/quant_x86.S Mon Jan 31 05:27:54 2005 -+@@ -24,6 +24,8 @@ -+ * The libdv homepage is http://libdv.sourceforge.net/. -+ */ -+ -++.section .note.GNU-stack, "", @progbits -++.previous -+ -+ /* -+ -+Index: libdv/libdv/quant_x86_64.S -+diff -u libdv/libdv/quant_x86_64.S:1.3 libdv/libdv/quant_x86_64.S:1.4 -+--- libdv/libdv/quant_x86_64.S:1.3 Sun Dec 12 17:48:51 2004 -++++ libdv/libdv/quant_x86_64.S Mon Jan 31 05:27:54 2005 -+@@ -24,6 +24,8 @@ -+ * The libdv homepage is http://libdv.sourceforge.net/. -+ */ -+ -++.section .note.GNU-stack, "", @progbits -++.previous -+ -+ /* -+ -+Index: libdv/libdv/rgbtoyuv.S -+diff -u libdv/libdv/rgbtoyuv.S:1.5 libdv/libdv/rgbtoyuv.S:1.6 -+--- libdv/libdv/rgbtoyuv.S:1.5 Mon Oct 20 12:46:50 2003 -++++ libdv/libdv/rgbtoyuv.S Mon Jan 31 05:27:54 2005 -+@@ -111,6 +111,8 @@ -+ -+ #endif -+ -++.section .note.GNU-stack, "", @progbits -++ -+ .text -+ -+ #define _inPtr 8 -+Index: libdv/libdv/rgbtoyuv_x86_64.S -+diff -u libdv/libdv/rgbtoyuv_x86_64.S:1.1 libdv/libdv/rgbtoyuv_x86_64.S:1.2 -+--- libdv/libdv/rgbtoyuv_x86_64.S:1.1 Tue Oct 19 20:49:24 2004 -++++ libdv/libdv/rgbtoyuv_x86_64.S Mon Jan 31 05:27:54 2005 -+@@ -111,6 +111,8 @@ -+ -+ #endif -+ -++.section .note.GNU-stack, "", @progbits -++ -+ .text -+ -+ #define _inPtr 8 -+Index: libdv/libdv/transpose_x86.S -+diff -u libdv/libdv/transpose_x86.S:1.2 libdv/libdv/transpose_x86.S:1.3 -+--- libdv/libdv/transpose_x86.S:1.2 Tue Dec 31 15:04:03 2002 -++++ libdv/libdv/transpose_x86.S Mon Jan 31 05:27:54 2005 -+@@ -1,3 +1,5 @@ -++.section .note.GNU-stack, "", @progbits -++ -+ .text -+ .global _dv_transpose_mmx -+ -+Index: libdv/libdv/transpose_x86_64.S -+diff -u libdv/libdv/transpose_x86_64.S:1.1 libdv/libdv/transpose_x86_64.S:1.2 -+--- libdv/libdv/transpose_x86_64.S:1.1 Tue Oct 19 20:49:24 2004 -++++ libdv/libdv/transpose_x86_64.S Mon Jan 31 05:27:54 2005 -+@@ -1,3 +1,5 @@ -++.section .note.GNU-stack, "", @progbits -++ -+ .text -+ .global _dv_transpose_mmx_x86_64 -+ -+Index: libdv/libdv/vlc_x86.S -+diff -u libdv/libdv/vlc_x86.S:1.2 libdv/libdv/vlc_x86.S:1.3 -+--- libdv/libdv/vlc_x86.S:1.2 Mon May 20 05:31:25 2002 -++++ libdv/libdv/vlc_x86.S Mon Jan 31 05:27:54 2005 -+@@ -1,4 +1,6 @@ -+ #include "asmoff.h" -++.section .note.GNU-stack, "", @progbits -++ -+ .text -+ .align 4 -+ .globl dv_decode_vlc -+Index: libdv/libdv/vlc_x86_64.S -+diff -u libdv/libdv/vlc_x86_64.S:1.2 libdv/libdv/vlc_x86_64.S:1.3 -+--- libdv/libdv/vlc_x86_64.S:1.2 Sun Dec 12 17:48:51 2004 -++++ libdv/libdv/vlc_x86_64.S Mon Jan 31 05:27:54 2005 -+@@ -1,4 +1,6 @@ -+ #include "asmoff.h" -++.section .note.GNU-stack, "", @progbits -++ -+ .text -+ .align 4 -+ .globl dv_decode_vlc ---- libdv-0.104.orig/debian/control -+++ libdv-0.104/debian/control -@@ -0,0 +1,48 @@ -+Source: libdv -+Section: graphics -+Priority: optional -+Maintainer: Daniel Kobras <kobras@debian.org> -+Build-Depends: debhelper (>= 4.1.1), libsdl1.2-dev (>= 1.2.2-1) | libsdl1.1-dev, libpopt-dev, libglib1.2-dev, libgtk1.2-dev, libx11-dev | xlibs-dev (>= 4.0), libxext-dev | xlibs-dev (>= 4.0), libxt-dev | xlibs-dev (>= 4.0), libxv-dev | xlibs-dev (>= 4.0), x-dev | xlibs-dev (>= 4.0), autotools-dev, pkg-config (>= 0.7), file, dpatch -+Standards-Version: 3.6.1 -+ -+Package: libdv4 -+Section: libs -+Architecture: any -+Depends: ${shlibs:Depends} -+Recommends: libdv-bin -+Description: software library for DV format digital video (runtime lib) -+ The Quasar DV Codec (libdv) is a software decoder for DV format video, as -+ defined by the IEC 61834 and SMPTE 314M standards. DV is the encoding format -+ used by consumer-grade digital camcorders. -+ . -+ This package contains the library needed to run executables using libdv. -+ -+Package: libdv4-dev -+Section: libdevel -+Priority: extra -+Architecture: any -+Depends: libc6-dev, libpopt-dev, libdv4 (= ${Source-Version}) -+Conflicts: libdv-dev -+Replaces: libdv-dev -+Provides: libdv-dev -+Description: software library for DV format digital video (devel files) -+ The Quasar DV Codec (libdv) is a software decoder for DV format video, as -+ defined by the IEC 61834 and SMPTE 314M standards. DV is the encoding format -+ used by consumer-grade digital camcorders. -+ . -+ This package contains the development headers and library files needed to -+ compile programs using libdv. -+ -+Package: libdv-bin -+Section: graphics -+Priority: extra -+Architecture: any -+Depends: ${shlibs:Depends} -+Replaces: libdv-dev (<< 0.98-1) -+Description: software library for DV format digital video (sample apps) -+ The Quasar DV Codec (libdv) is a software decoder for DV format video, as -+ defined by the IEC 61834 and SMPTE 314M standards. DV is the encoding format -+ used by consumer-grade digital camcorders. -+ . -+ This package contains sample programs for viewing, encoding, and transferring -+ DV data. diff --git a/libs/libdv/libdv.SlackBuild b/libs/libdv/libdv.SlackBuild deleted file mode 100755 index 1d5c7206..00000000 --- a/libs/libdv/libdv.SlackBuild +++ /dev/null @@ -1,130 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libdv -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libdv are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libdv" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=1.0.0} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 - export LDFLAGS="$LDFLAGS -L/lib64 -L/usr/lib64 -fPIC" - export CFLAGS="$CFLAGS -fPIC" -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://ufpr.dl.sourceforge.net/sourceforge/libdv/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -# apply debian patches, if exist -if [ -d "debian/patches" ]; then - for file in `ls debian/patches/*patch`; do - patch -p1 < $file - done -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libdv: libdv (libdv is a software codec for DV video) -libdv: -libdv: The Quasar DV codec (libdv) is a software codec for DV video, the -libdv: encoding format used by most digital camcorders, typically those that -libdv: support the IEEE 1394 (a.k.a. FireWire or i.Link) interface. Libdv -libdv: was developed according to the official standards for DV video: -libdv: IEC 61834 and SMPTE 314M. -libdv: -libdv: http://libdv.sourceforge.net/ -libdv: -libdv: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in AUTHORS COPYING COPYRIGHT ChangeLog INSTALL NEWS README README.dvconnect README.encoder TODO; do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -# install script -echo '( chroot . /sbin/ldconfig )' > install/doinst.sh - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libdvdcss/libdvdcss.SlackBuild b/libs/libdvdcss/libdvdcss.SlackBuild deleted file mode 100755 index ba0d5ca8..00000000 --- a/libs/libdvdcss/libdvdcss.SlackBuild +++ /dev/null @@ -1,203 +0,0 @@ -#!/bin/bash -# -# slackbuild for kile, by Rudson R. Alves -# requires: none -# tested: libdvdcss-1.2.9 - -CWD=`pwd` - -# ---- Inicializa variáveis com o slackbuild ------------ -if [ -e "/root/.slackbuildrc" ]; then - source /root/.slackbuildrc -elif [ -e "/etc/slackbuildrc" ]; then - source /etc/slackbuildrc -fi - -# -------- Variáveis de controle de versão -------------- -# Nome da fonte para a qual o slackbuild foi construído e -# o seu md5sum -SRC_ORIG="libdvdcss-1.2.9.tar.bz2" -MD5_ORIG="553383d898826c285afb2ee453b07868" -PACKAGE_ORIG=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\1/'` -VERSION_ORIG=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\2/'` - EXTENSION=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\3/'` - -# ------- Códigos de erro para o createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 -ERROR_PATCH=40; ERROR_VCS=41 - -# --------- Inicializa variáveis de entrada ------------- -PACKAGE=$PACKAGE_ORIG -ARCH=${ARCH:=i486} -SRC_DIR=${SRC:=$CWD} -VERSION=${VERSION:=$VERSION_ORIG} -SRC=$PACKAGE-$VERSION.$EXTENSION -BUILD=${BUILD:=1rud} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} -PREFIX=${PREFIX:=/usr} -OPTCONF=${OPTCONF:=""} -MD5=${MD5:=$MD5_ORIG} -URL=${URL:="http://download.videolan.org/pub/libdvdcss/$VERSION/$SRC"} - -# ---------------- SlackBuild Help ---------------------- -if [ "$1" = "--help" -o "$1" = "help" ]; then - echo -e "\033[01;32m -Use: var1=\"value 1\" var2=\"value 2\" ... <package>.SlackBuild -where: - ARCH=machine arch (i386, i486, i686, ...) - VERSION=package version - BUILD=package build version (default 1rud) - SRC=source name of package - SRC_DIR=source directory (default $PWD) - TMP=temporary directory (default /tmp) - REPOS=repository directory - PREFIX=prefix from install package - OPTCONF=options to pass from ./configure. To configure - help, use OPTCONF=\"--help\" - MD5=md5sum from package source - URL=url from package source -\033[m" - exit $ERROR_HELP -fi - -# ---------------- Download fontes ---------------------- -# Fonte a ser compilada, com o path -SOURCE=$SRC_DIR/$PACKAGE/$SRC -# Verifica existência do pacote em $SRC em $SRC_DIR -if [ ! -e $SOURCE ]; then - echo -e "\n\n\033[01;32m Download $PACKAGE \n\033[m" - wget "$URL" -P "$SRC_DIR/$PACKAGE" - # Verifica se o - if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m No such source file in $URL\n\033[m" - exit $ERROR_WGET - fi -fi - -# ------------------ Checa md5sum ----------------------- -if [ "$SRC_ORIG" = "$SRC" -o "$MD5" != "$MD5_ORIG" -a "$MD5" != "no" ]; then - SUM=`md5sum $SOURCE | awk '{print $1}'` - if [ "$SUM" != "$MD5" ]; then - echo -e "\n\n\033[01;31m MD5SUM error: run Slackbuild again \n\033[m" - echo -e "\033[01;31m Remove $PACKAGE from $SRC_DIR and start Slackbuild again or use MD5=\"no\" \n\033[m" - exit 0 - fi - echo -e "\n\n\033[01;32m Md5sum Ok \n\033[m" -fi - -# ----------------- ARCH e LIBDIR ----------------------- -# Libdir, para arch x86_64 -LIBDIR=$PREFIX/lib -# Seleciona flags para o compilador -if [ "$ARCH" = "i386" ]; then - SLKCFLAGS="-O2 -march=i386 -mcpu=i686" -elif [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mcpu=i686" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2" - LIBDIR="$PREFIX/lib64" -fi - -# -------------- Desempacota fontes --------------------- -# Desempacota fontes em PKG_SRC=$TMP/$PACKAGE-source -PKG_SRC=$TMP/$PACKAGE-source -rm -rf $PKG_SRC 2>/dev/null -mkdir -p $PKG_SRC -# Desempacota $SOURCE em $TMP/$PACKAGE-source -tar xvf $SOURCE -C $PKG_SRC -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m $SOURCE file error \n\033[m" - exit $ERROR_TAR -fi -# Pega o nome do diretório das fontes independente de sua -# estrutura (package-version...) -PKG_DIR="$PKG_SRC/$( ls $PKG_SRC/ )" -cd $PKG_DIR - -# -------------- Configura programa --------------------- -# Configura programa -echo -e "\n\n\033[01;32m CFLAGS=\"$SLKCFLAGS\" ./configure --prefix=$PREFIX --libdir=$LIBDIR $OPTCONF \n\033[m" -CFLAGS="$SLKCFLAGS" ./configure --prefix=$PREFIX --libdir=$LIBDIR $OPTCONF -if [ $? -ne 0 -o "$OPTCONF" = "--help" ]; then - echo -e "\n\n\033[01;31m Configure error \n\033[m" - exit $ERROR_CONF -fi - -# ---------------- Compila programa --------------------- -echo -e "\n\n\033[01;32m make -j3 \n\033[m" -make -j3 -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m Build error \n\033[m" - exit $ERROR_MAKE -fi - -# ------------- Diretório Temporário -------------------- -# Cria diretório temporário para construção do pacote -PKG=$TMP/$PACKAGE -rm -rf $PKG -mkdir -p $PKG - -# --------------- Instala programa ---------------------- -# Instala programa em diretório temporário -echo -e "\n\n\033[01;32m make install DESTDIR=$PKG \n\033[m" -make install DESTDIR=$PKG -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m Install error \n\033[m" - exit $ERROR_INSTALL -fi - -# ----------------- Stripa código ----------------------- -cd $PKG -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -# ---------------- Cria slack-desc ---------------------- -mkdir $PKG/install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |----handy-ruler------------------------------------------------------| -libdvdcss: Libdvdcss.SlackBuild by Rudson R. Alves -libdvdcss: -libdvdcss: libdvdcss is part of the VideoLAN project, a full MPEG2 client/server -libdvdcss: solution. The VideoLAN Client can also be used as a standalone program -libdvdcss: to play MPEG2 streams from a hard disk or a DVD. -libdvdcss: -libdvdcss: -libdvdcss: -libdvdcss: -libdvdcss: -EOF - -# ----------------- Documentações ----------------------- -# Criar diretório de documentação -PKG_DOC=$PKG/usr/doc/$PACKAGE-$VERSION -mkdir -p $PKG_DOC -cp $PKG_DIR/{AUTHORS,COPYING,ChangeLog,INSTALL,NEWS,README,doc/latex/refman.ps} $PKG_DOC -mkdir $PKG_DOC/html -cp $PKG_DIR/doc/html/* $PKG_DOC/html/ - -# --------------- Constroi o pacote --------------------- -echo -e "\n\n\033[01;32m makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz \n\033[m" -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz -if [ $? -ne 0 ]; then - exit $ERROR_MKPKG -fi - -# ----------- Remove arquivos temporários --------------- -if [ "$CLEANUP" = "yes" ]; then - echo -e "\n\n\033[01;32m Remove files... \n\033[m" - rm -rf $PKG $PKG_SRC -fi diff --git a/libs/libdvdplay/libdvdplay.SlackBuild b/libs/libdvdplay/libdvdplay.SlackBuild deleted file mode 100755 index 48351b33..00000000 --- a/libs/libdvdplay/libdvdplay.SlackBuild +++ /dev/null @@ -1,201 +0,0 @@ -#!/bin/bash -# -# slackbuild for libdvdplay, by Rudson R. Alves -# requires: none -# tested: libdvdplay-1.0.1 - -CWD=`pwd` - -# ---- Inicializa variáveis com o slackbuild ------------ -if [ -e "/root/.slackbuildrc" ]; then - source /root/.slackbuildrc -elif [ -e "/etc/slackbuildrc" ]; then - source /etc/slackbuildrc -fi - -# -------- Variáveis de controle de versão -------------- -# Nome da fonte para a qual o slackbuild foi construído e -# o seu md5sum -SRC_ORIG="libdvdplay-1.0.1.tar.bz2" -MD5_ORIG="602bca4ef78d79aa87e5e8920d958a78" -PACKAGE_ORIG=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\1/'` -VERSION_ORIG=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\2/'` - EXTENSION=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\3/'` - -# ------- Códigos de erro para o createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 -ERROR_PATCH=40; ERROR_VCS=41 - -# --------- Inicializa variáveis de entrada ------------- -PACKAGE=$PACKAGE_ORIG -ARCH=${ARCH:=i468} -SRC_DIR=${SRC:=$CWD} -VERSION=${VERSION:=$VERSION_ORIG} -SRC=$PACKAGE-$VERSION.$EXTENSION -BUILD=${BUILD:=1rud} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} -PREFIX=${PREFIX:=/usr} -OPTCONF=${OPTCONF:=""} -MD5=${MD5:=$MD5_ORIG} -URL=${URL:="http://download.videolan.org/pub/libdvdplay/$VERSION/$SRC"} - -# ---------------- SlackBuild Help ---------------------- -if [ "$1" = "--help" -o "$1" = "help" ]; then - echo -e "\033[01;32m -Use: var1=\"value 1\" var2=\"value 2\" ... <package>.SlackBuild -where: - ARCH=machine arch (i386, i486, i686, ...) - VERSION=package version - BUILD=package build version (default 1rud) - SRC=source name of package - SRC_DIR=source directory (default $PWD) - TMP=temporary directory (default /tmp) - REPOS=repository directory - PREFIX=prefix from install package - OPTCONF=options to pass from ./configure. To configure - help, use OPTCONF=\"--help\" - MD5=md5sum from package source - URL=url from package source -\033[m" - exit $ERROR_HELP -fi - -# ---------------- Download fontes ---------------------- -# Fonte a ser compilada, com o path -SOURCE=$SRC_DIR/$PACKAGE/$SRC -# Verifica existência do pacote em $SRC em $SRC_DIR -if [ ! -e $SOURCE ]; then - echo -e "\n\n\033[01;32m Download $PACKAGE \n\033[m" - wget "$URL" -P "$SRC_DIR/$PACKAGE" - # Verifica se o - if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m No such source file in $URL\n\033[m" - exit $ERROR_WGET - fi -fi - -# ------------------ Checa md5sum ----------------------- -if [ "$SRC_ORIG" = "$SRC" -o "$MD5" != "$MD5_ORIG" -a "$MD5" != "no" ]; then - SUM=`md5sum $SOURCE | awk '{print $1}'` - if [ "$SUM" != "$MD5" ]; then - echo -e "\n\n\033[01;31m MD5SUM error: run Slackbuild again \n\033[m" - echo -e "\033[01;31m Remove $PACKAGE from $SRC_DIR and start Slackbuild again or use MD5=\"no\" \n\033[m" - exit 0 - fi - echo -e "\n\n\033[01;32m Md5sum Ok \n\033[m" -fi - -# ----------------- ARCH e LIBDIR ----------------------- -# Libdir, para arch x86_64 -LIBDIR=$PREFIX/lib -# Seleciona flags para o compilador -if [ "$ARCH" = "i386" ]; then - SLKCFLAGS="-O2 -march=i386 -mcpu=i686" -elif [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mcpu=i686" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2" - LIBDIR="$PREFIX/lib64" -fi - -# -------------- Desempacota fontes --------------------- -# Desempacota fontes em PKG_SRC=$TMP/$PACKAGE-source -PKG_SRC=$TMP/$PACKAGE-source -rm -rf $PKG_SRC 2>/dev/null -mkdir -p $PKG_SRC -# Desempacota $SOURCE em $TMP/$PACKAGE-source -tar xvf $SOURCE -C $PKG_SRC -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m $SOURCE file error \n\033[m" - exit $ERROR_TAR -fi -# Pega o nome do diretório das fontes independente de sua -# estrutura (package-version...) -PKG_DIR="$PKG_SRC/$( ls $PKG_SRC/ )" -cd $PKG_DIR - -# -------------- Configura programa --------------------- -# Configura programa -echo -e "\n\n\033[01;32m CFLAGS=\"$SLKCFLAGS\" ./configure --prefix=$PREFIX --libdir=$LIBDIR $OPTCONF \n\033[m" -CFLAGS="$SLKCFLAGS" ./configure --prefix=$PREFIX --libdir=$LIBDIR $OPTCONF -if [ $? -ne 0 -o "$OPTCONF" = "--help" ]; then - echo -e "\n\n\033[01;31m Configure error \n\033[m" - exit $ERROR_CONF -fi - -# ---------------- Compila programa --------------------- -echo -e "\n\n\033[01;32m make -j3 \n\033[m" -make -j3 -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m Build error \n\033[m" - exit $ERROR_MAKE -fi - -# ------------- Diretório Temporário -------------------- -# Cria diretório temporário para construção do pacote -PKG=$TMP/$PACKAGE -rm -rf $PKG -mkdir -p $PKG - -# --------------- Instala programa ---------------------- -# Instala programa em diretório temporário -echo -e "\n\n\033[01;32m make install DESTDIR=$PKG \n\033[m" -make install DESTDIR=$PKG -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m Install error \n\033[m" - exit $ERROR_INSTALL -fi - -# ----------------- Stripa código ----------------------- -cd $PKG -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -# ---------------- Cria slack-desc ---------------------- -mkdir $PKG/install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |----handy-ruler------------------------------------------------------| -libdvdplay: libdvdplay.SlackBuild by Rudson R. Alves -libdvdplay: -libdvdplay: libdvdplay is an attempt to make a library from ogle dvd navigation -libdvdplay: code so that a simple API provides access to both DVD Video data -libdvdplay: and DVD information to a reader application. -libdvdplay: -libdvdplay: libdvdplay is a layer over libdvdread. As a consequence it provides -libdvdplay: read, seek for DVD media. But it also provides the client -libdvdplay: application with a set of access functions needed to create an -libdvdplay: interface for the DVD reader (audio, subtitles, titles ...). -EOF - -# ----------------- Documentações ----------------------- -# Criar diretório de documentação -PKG_DOC=$PKG/usr/doc/$PACKAGE-$VERSION -mkdir -p $PKG_DOC -cp $PKG_DIR/{AUTHORS,COPYING,ChangeLog,INSTALL,NEWS,README,THANKS,TODO} $PKG_DOC - -# --------------- Constroi o pacote --------------------- -echo -e "\n\n\033[01;32m makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz \n\033[m" -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz -if [ $? -ne 0 ]; then - exit $ERROR_MKPKG -fi - -# ----------- Remove arquivos temporários --------------- -if [ "$CLEANUP" = "yes" ]; then - echo -e "\n\n\033[01;32m Remove files... \n\033[m" - rm -rf $PKG $PKG_SRC -fi diff --git a/libs/libdvdplay/slack-required b/libs/libdvdplay/slack-required deleted file mode 100644 index 2539ecbd..00000000 --- a/libs/libdvdplay/slack-required +++ /dev/null @@ -1 +0,0 @@ -libdvdread diff --git a/libs/libdvdread/libdvdread.SlackBuild b/libs/libdvdread/libdvdread.SlackBuild deleted file mode 100755 index 3f961f92..00000000 --- a/libs/libdvdread/libdvdread.SlackBuild +++ /dev/null @@ -1,201 +0,0 @@ -#!/bin/bash -# -# slackbuild for libdvdread, by Rudson R. Alves -# requires: none -# tested: libdvdread-0.9.7 - -CWD=`pwd` - -# ---- Inicializa variáveis com o slackbuild ------------ -if [ -e "/root/.slackbuildrc" ]; then - source /root/.slackbuildrc -elif [ -e "/etc/slackbuildrc" ]; then - source /etc/slackbuildrc -fi - -# -------- Variáveis de controle de versão -------------- -# Nome da fonte para a qual o slackbuild foi construído e -# o seu md5sum -SRC_ORIG="libdvdread-0.9.7.tar.gz" -MD5_ORIG="078788c9241ae16763529e1235502337" -PACKAGE_ORIG=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\1/'` -VERSION_ORIG=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\2/'` - EXTENSION=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\3/'` - -# ------- Códigos de erro para o createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 -ERROR_PATCH=40; ERROR_VCS=41 - -# --------- Inicializa variáveis de entrada ------------- -PACKAGE=$PACKAGE_ORIG -ARCH=${ARCH:=i468} -SRC_DIR=${SRC:=$CWD} -VERSION=${VERSION:=$VERSION_ORIG} -SRC=$PACKAGE-$VERSION.$EXTENSION -BUILD=${BUILD:=1rud} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} -PREFIX=${PREFIX:=/usr} -OPTCONF=${OPTCONF:=""} -MD5=${MD5:=$MD5_ORIG} -URL=${URL:="http://freshmeat.net/redir/libdvdread/17926/url_tgz/$SRC"} - -# ---------------- SlackBuild Help ---------------------- -if [ "$1" = "--help" -o "$1" = "help" ]; then - echo -e "\033[01;32m -Use: var1=\"value 1\" var2=\"value 2\" ... <package>.SlackBuild -where: - ARCH=machine arch (i386, i486, i686, ...) - VERSION=package version - BUILD=package build version (default 1rud) - SRC=source name of package - SRC_DIR=source directory (default $PWD) - TMP=temporary directory (default /tmp) - REPOS=repository directory - PREFIX=prefix from install package - OPTCONF=options to pass from ./configure. To configure - help, use OPTCONF=\"--help\" - MD5=md5sum from package source - URL=url from package source -\033[m" - exit $ERROR_HELP -fi - -# ---------------- Download fontes ---------------------- -# Fonte a ser compilada, com o path -SOURCE=$SRC_DIR/$PACKAGE/$SRC -# Verifica existência do pacote em $SRC em $SRC_DIR -if [ ! -e $SOURCE ]; then - echo -e "\n\n\033[01;32m Download $PACKAGE \n\033[m" - wget "$URL" -P "$SRC_DIR/$PACKAGE" - # Verifica se o - if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m No such source file in $URL\n\033[m" - exit $ERROR_WGET - fi -fi - -# ------------------ Checa md5sum ----------------------- -if [ "$SRC_ORIG" = "$SRC" -o "$MD5" != "$MD5_ORIG" -a "$MD5" != "no" ]; then - SUM=`md5sum $SOURCE | awk '{print $1}'` - if [ "$SUM" != "$MD5" ]; then - echo -e "\n\n\033[01;31m MD5SUM error: run Slackbuild again \n\033[m" - echo -e "\033[01;31m Remove $PACKAGE from $SRC_DIR and start Slackbuild again or use MD5=\"no\" \n\033[m" - exit 0 - fi - echo -e "\n\n\033[01;32m Md5sum Ok \n\033[m" -fi - -# ----------------- ARCH e LIBDIR ----------------------- -# Libdir, para arch x86_64 -LIBDIR=$PREFIX/lib -# Seleciona flags para o compilador -if [ "$ARCH" = "i386" ]; then - SLKCFLAGS="-O2 -march=i386 -mcpu=i686" -elif [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mcpu=i686" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2" - LIBDIR="$PREFIX/lib64" -fi - -# -------------- Desempacota fontes --------------------- -# Desempacota fontes em PKG_SRC=$TMP/$PACKAGE-source -PKG_SRC=$TMP/$PACKAGE-source -rm -rf $PKG_SRC 2>/dev/null -mkdir -p $PKG_SRC -# Desempacota $SOURCE em $TMP/$PACKAGE-source -tar xvf $SOURCE -C $PKG_SRC -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m $SOURCE file error \n\033[m" - exit $ERROR_TAR -fi -# Pega o nome do diretório das fontes independente de sua -# estrutura (package-version...) -PKG_DIR="$PKG_SRC/$( ls $PKG_SRC/ )" -cd $PKG_DIR - -# -------------- Configura programa --------------------- -# Configura programa -echo -e "\n\n\033[01;32m CFLAGS=\"$SLKCFLAGS\" ./configure --prefix=$PREFIX --libdir=$LIBDIR $OPTCONF \n\033[m" -CFLAGS="$SLKCFLAGS" ./configure --prefix=$PREFIX --libdir=$LIBDIR $OPTCONF --with-libdvdcss -if [ $? -ne 0 -o "$OPTCONF" = "--help" ]; then - echo -e "\n\n\033[01;31m Configure error \n\033[m" - exit $ERROR_CONF -fi - -# ---------------- Compila programa --------------------- -echo -e "\n\n\033[01;32m make -j3 \n\033[m" -make -j3 -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m Build error \n\033[m" - exit $ERROR_MAKE -fi - -# ------------- Diretório Temporário -------------------- -# Cria diretório temporário para construção do pacote -PKG=$TMP/$PACKAGE -rm -rf $PKG -mkdir -p $PKG - -# --------------- Instala programa ---------------------- -# Instala programa em diretório temporário -echo -e "\n\n\033[01;32m make install DESTDIR=$PKG \n\033[m" -make install DESTDIR=$PKG -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m Install error \n\033[m" - exit $ERROR_INSTALL -fi - -# ----------------- Stripa código ----------------------- -cd $PKG -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -# ---------------- Cria slack-desc ---------------------- -mkdir $PKG/install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |----handy-ruler------------------------------------------------------| -libdvdread: libdvdread.SlackBuild by Rudson R. Alves -libdvdread: -libdvdread: libdvdread provides a simple foundation for reading DVD-Video -libdvdread: images. It offers DVD applications: -libdvdread: 1. A simple abstraction for reading the files on a DVD image -libdvdread: 2. A simple library for parsing the information (IFO) files -libdvdread: 3. A simple library for parsing the navigation (NAV) packets -libdvdread: -libdvdread: This allows application designers to access some of the more -libdvdread: advanced features of the DVD format. -EOF - -# ----------------- Documentações ----------------------- -# Criar diretório de documentação -PKG_DOC=$PKG/usr/doc/$PACKAGE-$VERSION -mkdir -p $PKG_DOC -cp $PKG_DIR/{AUTHORS,COPYING,ChangeLog,INSTALL,NEWS,README,TODO} $PKG_DOC - -# --------------- Constroi o pacote --------------------- -echo -e "\n\n\033[01;32m makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz \n\033[m" -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz -if [ $? -ne 0 ]; then - exit $ERROR_MKPKG -fi - -# ----------- Remove arquivos temporários --------------- -if [ "$CLEANUP" = "yes" ]; then - echo -e "\n\n\033[01;32m Remove files... \n\033[m" - rm -rf $PKG $PKG_SRC -fi diff --git a/libs/libdvdread/slack-required b/libs/libdvdread/slack-required deleted file mode 100644 index 2a9cfbbc..00000000 --- a/libs/libdvdread/slack-required +++ /dev/null @@ -1 +0,0 @@ -libdvdcss diff --git a/libs/libevent/libevent.SlackBuild b/libs/libevent/libevent.SlackBuild deleted file mode 100755 index 75d7b4b8..00000000 --- a/libs/libevent/libevent.SlackBuild +++ /dev/null @@ -1,111 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libevent -# by rhatto at riseup.net -# - -# TODO: check package signature - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libevent" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=1.1b} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://www.monkey.org/~provos/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libevent: libevent (Event notification library) -libevent: -libevent: The libevent API provides a mechanism to execute a callback function -libevent: when a specific event occurs on a file descriptor or after a timeout -libevent: has been reached. Furthermore, libevent also support callbacks due -libevent: to signals or regular timeouts. -libevent: -libevent: -libevent: -libevent: -libevent: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in README; do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -# could not find package licence -echo "Libevent has been released under a 3-clause BSD license." > usr/doc/$PACKAGE-$VERSION/LICENSE - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libexif-gtk/libexif-gtk.SlackBuild b/libs/libexif-gtk/libexif-gtk.SlackBuild deleted file mode 100755 index fc25e9e4..00000000 --- a/libs/libexif-gtk/libexif-gtk.SlackBuild +++ /dev/null @@ -1,124 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libexif-gtk -# by rhatto at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libexif-gtk are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libexif-gtk" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=0.3.5} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - export LDFLAGS="-L/lib64 -L/usr/lib64" - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -# ------- error codes for createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 -ERROR_PATCH=40 - -RTOOL="wget" -PACKAGE_EXT="bz2" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://easynews.dl.sourceforge.net/sourceforge/libexif/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf $SRC_DIR/$SRC || exit $ERROR_TAR -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff || exit $ERROR_PATCH -fi - -# see http://blog.gmane.org/gmane.comp.graphics.libexif.devel/month=20060101 -export CFLAGS="-I/usr/include/libexif/" - -./configure --prefix=/usr --libdir=$LIBDIR || exit $ERROR_CONF -make || exit $ERROR_MAKE -make DESTDIR=$TMP/package-$PACKAGE install || exit $ERROR_INSTALL - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libexif-gtk: libexif-gtk (library to read and write EXIF data) -libexif-gtk: -libexif-gtk: Libexif reads and writes EXIF metainformation from and to image -libexif-gtk: files. -libexif-gtk: -libexif-gtk: -libexif-gtk: -libexif-gtk: -libexif-gtk: -libexif-gtk: -libexif-gtk: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -DOCS="ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README" - -for file in $DOCS; do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libgc/libgc.SlackBuild b/libs/libgc/libgc.SlackBuild deleted file mode 100755 index b5a88939..00000000 --- a/libs/libgc/libgc.SlackBuild +++ /dev/null @@ -1,118 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libgc -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libgc are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="gc" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=6.8} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE$VERSION.tar.$PACKAGE_EXT" -URL="http://www.hpl.hp.com/personal/Hans_Boehm/gc/gc_source/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR --with-docdir=/usr/doc/$PACKAGE-$VERSION -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libgc: libgc (libgc is portable garbage colector library) -libgc: -libgc: The Boehm-Demers-Weiser conservative garbage collector can be used as -libgc: a garbage collecting replacement for C malloc or C++ new. It allows -libgc: you to allocate memory basically as you normally would, without -libgc: explicitly deallocating memory that is no longer useful. The -libgc: collector automatically recycles memory when it determines that it -libgc: can no longer be otherwise accessed. -libgc: -libgc: http://www.hpl.hp.com/personal/Hans_Boehm/gc/ -libgc: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in README;do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/lib$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libgcrypt/libgcrypt.SlackBuild b/libs/libgcrypt/libgcrypt.SlackBuild deleted file mode 100755 index c64ed336..00000000 --- a/libs/libgcrypt/libgcrypt.SlackBuild +++ /dev/null @@ -1,109 +0,0 @@ -#!/bin/bash -# -# slackbuild for libgcrypt from http://www.slacky.it/download/libraries/libgcrypt/1.2.2/src -# -# Heavily based on the Slackware 10.2 SlackBuild -# http://directory.fsf.org/security/libgcrypt.html -# -# small changes by rhatto -# -# TODO: check source signature -# - -CWD=`pwd` - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libgcrypt" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=1.2.2} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="bz2" -NAME="$PACKAGE" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="ftp://ftp.gnupg.org/gcrypt/$PACKAGE/$SRC" - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" - wget "$URL.sig" -O "$SRC_DIR/$SRC.sig" -fi - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mcpu=i686" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mcpu=i686" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2" -fi - -TMP="$TMP/$PACKAGE" -PKG=$TMP/package-$PACKAGE -rm -rf $TMP -mkdir -p $PKG - -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $NAME-$VERSION -chown -R root.root . -CFLAGS="$SLKCFLAGS" \ -CXXFLAGS="$SLKCFLAGS" \ -./configure --prefix=/usr --libdir="$LIBDIR" \ ---disable-static \ ---enable-m-guard \ ---program-prefix="" \ ---program-suffix="" \ -$ARCH-slackware-linux -make || exit 32 -make install DESTDIR=$PKG -mkdir -p $PKG/usr/doc/$NAME-$VERSION -cp -a AUTHORS BUGS COPYING* NEWS README* THANKS TODO VERSION \ - $PKG/usr/doc/$NAME-$VERSION - -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) - -gzip $PKG/usr/info/*.info -rm $PKG/usr/info/dir -chown -R root.bin $PKG/usr/bin -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc -cd $CWD -cp -a *.SlackBuild slack-desc $PKG/usr/doc/$NAME-$VERSION -chown -R root.root $PKG/usr/doc/$NAME-$VERSION -echo 'chroot . /sbin/ldconfig' > $PKG/install/doinst.sh -cd $PKG -#requiredbuilder -v -y $PKG - -makepkg -l y -c n $REPOS/$NAME-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi diff --git a/libs/libgcrypt/slack-desc b/libs/libgcrypt/slack-desc deleted file mode 100644 index a4bfb8bf..00000000 --- a/libs/libgcrypt/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -libgcrypt: LibGcrypt -libgcrypt: -libgcrypt: Libgcrypt is a general purpose crypto library based on the code -libgcrypt: used in GnuPG. We can't start with a new version number because -libgcrypt: libgcrypt was part of gnupg 1.1 and some applications already used -libgcrypt: it and tested for the version number. We believe that the API can -libgcrypt: stay as it is, except that new functions may be added in the -libgcrypt: future. -libgcrypt: -libgcrypt: -libgcrypt: diff --git a/libs/libgpg-error/libgpg-error.SlackBuild b/libs/libgpg-error/libgpg-error.SlackBuild deleted file mode 100755 index dafd558b..00000000 --- a/libs/libgpg-error/libgpg-error.SlackBuild +++ /dev/null @@ -1,113 +0,0 @@ -#!/bin/bash -# -# slackbuild for libgpg-error from -# http://www.slacky.it/download/libraries/libgpg-error/1.3/src/libgpg-error.SlackBuild -# -# Heavily based on the Slackware 10.2 SlackBuild -# http://www.gnupg.org/(en)/download/index.html -# -# small changes by rhatto -# - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libgpg-error" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=1.4} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="bz2" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -#KEY="http://..." -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://ftp.gnupg.org/GnuPG/libgpg-error/$SRC" - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" - wget "$URL.sig" -O "$SRC_DIR/$SRC.sig" -fi - -# TODO: signature checking -#if [ ! -f "$SRC_DIR/$PACKAGE-key.asc" ]; then -# wget "$KEY" -O "$SRC_DIR/$PACKAGE-key.asc" && gpg --import $SRC_DIR/$PACKAGE-key.asc -#fi - -gpg --verify $SRC_DIR/$SRC.sig $SRC || echo WARNING: Could not check signature or WRONG signature found. - -NAME="$PACKAGE" - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mcpu=i686" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mcpu=i686" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2" -fi - -TMP="$TMP/$PACKAGE" -PKG=$TMP/package-libgpg-error -rm -rf $TMP -mkdir -p $PKG - -cd $TMP - -tar xvf$tarflag $SRC_DIR/$NAME-$VERSION.tar.bz2 -cd $NAME-$VERSION -chown -R root.root . -CFLAGS="$SLKCFLAGS" \ -./configure --prefix=/usr --libdir=$LIBDIR \ ---disable-static \ ---program-prefix="" \ ---program-suffix="" \ -$ARCH-slackware-linux -make || exit 32 -make install DESTDIR=$PKG -mkdir -p $PKG/usr/doc/$NAME-$VERSION -cp -a ABOUT-NLS AUTHORS ChangeLog COPYING* INSTALL NEWS README $PKG/usr/doc/$NAME-$VERSION - -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) - -chown -R root.bin $PKG/usr/bin -mkdir -p $PKG/install -cat $CWD/slack-desc > $PKG/install/slack-desc -cat $CWD/slack-desc > $PKG/usr/doc/$NAME-$VERSION/slack-desc -cat $CWD/$NAME.SlackBuild > $PKG/usr/doc/$NAME-$VERSION/$NAME.SlackBuild -echo 'chroot . /sbin/ldconfig' > $PKG/install/doinst.sh -cd $PKG -# requiredbuilder -v -y -s $CWD $PKG - -makepkg -l y -c n $REPOS/$NAME-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libgpg-error/slack-desc b/libs/libgpg-error/slack-desc deleted file mode 100644 index 4628b081..00000000 --- a/libs/libgpg-error/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |-----handy-ruler-------------------------------------------------------| -libgpg-error: libgpg-error -libgpg-error: -libgpg-error: This is a library that defines common error values for all GnuPG -libgpg-error: components. Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt, -libgpg-error: pinentry, SmartCard Daemon and possibly more in the future. -libgpg-error: -libgpg-error: -libgpg-error: -libgpg-error: -libgpg-error: -libgpg-error:
\ No newline at end of file diff --git a/libs/libgpg-error/slack-required b/libs/libgpg-error/slack-required deleted file mode 100644 index dc80d9bb..00000000 --- a/libs/libgpg-error/slack-required +++ /dev/null @@ -1 +0,0 @@ -glibc-solibs >= 2.3.5-i486-5 diff --git a/libs/libgphoto2/libgphoto2-2.2.1.diff b/libs/libgphoto2/libgphoto2-2.2.1.diff deleted file mode 100644 index e80512a9..00000000 --- a/libs/libgphoto2/libgphoto2-2.2.1.diff +++ /dev/null @@ -1,14 +0,0 @@ -diff -Naur libgphoto2-2.2.1.orig/packaging/generic/print-camera-list.c libgphoto2-2.2.1/packaging/generic/print-camera-list.c ---- libgphoto2-2.2.1.orig/packaging/generic/print-camera-list.c 2006-04-18 22:54:05.000000000 -0300 -+++ libgphoto2-2.2.1/packaging/generic/print-camera-list.c 2006-10-20 15:30:00.000000000 -0200 -@@ -48,8 +48,8 @@ - #include <time.h> - #include <string.h> - --#include <gphoto2/gphoto2-camera.h> --#include <gphoto2/gphoto2-port-log.h> -+#include <libgphoto2/gphoto2-camera.h> -+#include <libgphoto2_port/libgphoto2_port/gphoto2-port-log.h> - - #ifndef TRUE - #define TRUE (0==0) diff --git a/libs/libgphoto2/libgphoto2.SlackBuild b/libs/libgphoto2/libgphoto2.SlackBuild deleted file mode 100755 index 5c083801..00000000 --- a/libs/libgphoto2/libgphoto2.SlackBuild +++ /dev/null @@ -1,121 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libgphoto2 -# by rhatto at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libgphoto2 are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libgphoto2" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=2.2.1} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - export LDFLAGS="-L/lib64 -L/usr/lib64" - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -# ------- error codes for createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 -ERROR_PATCH=40 - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://easynews.dl.sourceforge.net/sourceforge/gphoto/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf $SRC_DIR/$SRC || exit $ERROR_TAR -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff || exit $ERROR_PATCH -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR --with-included-ltdl || exit $ERROR_CONF -make || exit $ERROR_MAKE -make DESTDIR=$TMP/package-$PACKAGE install || exit $ERROR_INSTALL - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libgphoto2: libgphoto2 (digital camera access library) -libgphoto2: -libgphoto2: libgphoto2 is a library that can be used by applications to access -libgphoto2: various digital cameras. -libgphoto2: -libgphoto2: -libgphoto2: -libgphoto2: -libgphoto2: -libgphoto2: -libgphoto2: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -DOCS="ABOUT-NLS AUTHORS CHANGES COPYING ChangeLog HACKING INSTALL MAINTAINERS NEWS README TESTERS" - -for file in $DOCS; do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libiconv/libiconv.SlackBuild b/libs/libiconv/libiconv.SlackBuild deleted file mode 100755 index 81d2bd79..00000000 --- a/libs/libiconv/libiconv.SlackBuild +++ /dev/null @@ -1,104 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libiconv -# by rhatto at riseup.net -# - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libiconv" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=1.11} -BUILD=${BUILD:=2rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://ftp.gnu.org/pub/gnu/libiconv/$SRC" - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -./configure --prefix=/usr --libdir=$LIBDIR --enable-static -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libiconv: libiconv (Character set conversion library) -libiconv: -libiconv: GNU libiconv provides an iconv() implementation for use on systems -libiconv: which don't have one or whose implementation cannot convert from/to -libiconv: Unicode. It supports all the important encodings in use today. -libiconv: -libiconv: -libiconv: -libiconv: -libiconv: -libiconv: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in ABOUT-NLS AUTHORS COPYING.LIB ChangeLog DESIGN INSTALL.generic NEWS NOTES PORTS README THANKS; do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -echo 'chroot . /sbin/ldconfig' > install/doinst.sh - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libiec61883/libiec61883.SlackBuild b/libs/libiec61883/libiec61883.SlackBuild deleted file mode 100755 index 9d4a997f..00000000 --- a/libs/libiec61883/libiec61883.SlackBuild +++ /dev/null @@ -1,118 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libiec61883 -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libiec61883 are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libiec61883" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=1.1.0} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://www.linux1394.org/dl/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR --with-docdir=/usr/doc/$PACKAGE-$VERSION -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libiec61883: libiec61883 (libiec61883 is Firewire video related library) -libiec61883: -libiec61883: This library is an implementation of IEC 61883, part 1 (CIP, plug -libiec61883: registers, and CMP), part 2 (DV-SD), part 4 (MPEG2-TS), and part 6 -libiec61883: (AMDTP). Outside of IIDC, nearly all FireWire multimedia devices use -libiec61883: IEC 61883 protocols. -libiec61883: -libiec61883: -libiec61883: -libiec61883: http://www.linux1394.org/ -libiec61883: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in AUTHORS COPYING ChangeLog INSTALL NEWS README;do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libiec61883/slack-required b/libs/libiec61883/slack-required deleted file mode 100644 index 8bc743d3..00000000 --- a/libs/libiec61883/slack-required +++ /dev/null @@ -1 +0,0 @@ -libraw1394 diff --git a/libs/libkexif/libkexif.SlackBuild b/libs/libkexif/libkexif.SlackBuild deleted file mode 100644 index 4f4e4c53..00000000 --- a/libs/libkexif/libkexif.SlackBuild +++ /dev/null @@ -1,202 +0,0 @@ -#!/bin/bash -# -# slackbuild for libkexif, by Rudson R. Alves -# requires: none -# tested: libkexif-0.2.5 - -CWD=`pwd` - -# ---- Inicializa variáveis com o slackbuild ------------ -if [ -e "/root/.slackbuildrc" ]; then - source /root/.slackbuildrc -elif [ -e "/etc/slackbuildrc" ]; then - source /etc/slackbuildrc -fi - -# -------- Variáveis de controle de versão -------------- -# Nome da fonte para a qual o slackbuild foi construído e -# o seu md5sum -SRC_ORIG="libkexif-0.2.5.tar.bz2" -MD5_ORIG="a2b933b80deabe57d8515583236ae6ff" -PACKAGE_ORIG=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\1/'` -VERSION_ORIG=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\2/'` - EXTENSION=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\3/'` - -# ------- Códigos de erro para o createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 -ERROR_PATCH=40; ERROR_VCS=41 - -# --------- Inicializa variáveis de entrada ------------- -PACKAGE=$PACKAGE_ORIG -ARCH=${ARCH:=i468} -SRC_DIR=${SRC:=$CWD} -VERSION=${VERSION:=$VERSION_ORIG} -SRC=$PACKAGE-$VERSION.$EXTENSION -BUILD=${BUILD:=1rud} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} -PREFIX=${PREFIX:=/opt/kde} -OPTCONF=${OPTCONF:=""} -MD5=${MD5:=$MD5_ORIG} -URL=${URL:="http://ufpr.dl.sourceforge.net/sourceforge/kipi/$SRC"} - -# ---------------- SlackBuild Help ---------------------- -if [ "$1" = "--help" -o "$1" = "help" ]; then - echo -e "\033[01;32m -Use: var1=\"value 1\" var2=\"value 2\" ... <package>.SlackBuild -where: - ARCH=machine arch (i386, i486, i686, ...) - VERSION=package version - BUILD=package build version (default 1rud) - SRC=source name of package - SRC_DIR=source directory (default $PWD) - TMP=temporary directory (default /tmp) - REPOS=repository directory - PREFIX=prefix from install package - OPTCONF=options to pass from ./configure. To configure - help, use OPTCONF=\"--help\" - MD5=md5sum from package source - URL=url from package source -\033[m" - exit $ERROR_HELP -fi - -# ---------------- Download fontes ---------------------- -# Fonte a ser compilada, com o path -SOURCE=$SRC_DIR/$PACKAGE/$SRC -# Verifica existência do pacote em $SRC em $SRC_DIR -if [ ! -e $SOURCE ]; then - echo -e "\n\n\033[01;32m Download $PACKAGE \n\033[m" - wget "$URL" -P "$SRC_DIR/$PACKAGE" - # Verifica se o - if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m No such source file in $URL\n\033[m" - exit $ERROR_WGET - fi -fi - -# ------------------ Checa md5sum ----------------------- -if [ "$SRC_ORIG" = "$SRC" -o "$MD5" != "$MD5_ORIG" -a "$MD5" != "no" ]; then - SUM=`md5sum $SOURCE | awk '{print $1}'` - if [ "$SUM" != "$MD5" ]; then - echo -e "\n\n\033[01;31m MD5SUM error: run Slackbuild again \n\033[m" - echo -e "\033[01;31m Remove $PACKAGE from $SRC_DIR and start Slackbuild again or use MD5=\"no\" \n\033[m" - exit 0 - fi - echo -e "\n\n\033[01;32m Md5sum Ok \n\033[m" -fi - -# ----------------- ARCH e LIBDIR ----------------------- -# Libdir, para arch x86_64 -LIBDIR=$PREFIX/lib -# Seleciona flags para o compilador -if [ "$ARCH" = "i386" ]; then - SLKCFLAGS="-O2 -march=i386 -mcpu=i686" -elif [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mcpu=i686" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2" -# LIBDIR="$PREFIX/lib64" -fi - -# -------------- Desempacota fontes --------------------- -# Desempacota fontes em PKG_SRC=$TMP/$PACKAGE-source -PKG_SRC=$TMP/$PACKAGE-source -rm -rf $PKG_SRC 2>/dev/null -mkdir -p $PKG_SRC -# Desempacota $SOURCE em $TMP/$PACKAGE-source -tar xvf $SOURCE -C $PKG_SRC -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m $SOURCE file error \n\033[m" - exit $ERROR_TAR -fi -# Pega o nome do diretório das fontes independente de sua -# estrutura (package-version...) -PKG_DIR="$PKG_SRC/$( ls $PKG_SRC/ )" -cd $PKG_DIR - -# -------------- Configura programa --------------------- -# Configura programa -echo -e "\n\n\033[01;32m CFLAGS=\"$SLKCFLAGS\" ./configure --prefix=$PREFIX --libdir=$LIBDIR $OPTCONF \n\033[m" - -CFLAGS="$SLKCFLAGS" ./configure --prefix=$PREFIX $OPTCONF --libdir=$LIBDIR -if [ $? -ne 0 -o "$OPTCONF" = "--help" ]; then - echo -e "\n\n\033[01;31m Configure error \n\033[m" - exit $ERROR_CONF -fi - -# ---------------- Compila programa --------------------- -echo -e "\n\n\033[01;32m make -j3 \n\033[m" -make -j3 -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m Build error \n\033[m" - exit $ERROR_MAKE -fi - -# ------------- Diretório Temporário -------------------- -# Cria diretório temporário para construção do pacote -PKG=$TMP/$PACKAGE -rm -rf $PKG -mkdir -p $PKG - -# --------------- Instala programa ---------------------- -# Instala programa em diretório temporário -echo -e "\n\n\033[01;32m make install DESTDIR=$PKG \n\033[m" -make install DESTDIR=$PKG -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m Install error \n\033[m" - exit $ERROR_INSTALL -fi - -# ----------------- Stripa código ----------------------- -cd $PKG -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -# ---------------- Cria slack-desc ---------------------- -mkdir $PKG/install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |----handy-ruler------------------------------------------------------| -libkexif: LIBKEXIF package, by Rudson R. Alves <rudsonalves[a]yahoo.com.br> -libkexif: -libkexif: Libkexif is a library for manipulating EXIF information embedded in -libkexif: images. It currently supports viewing of all EXIF information via -libkexif: libexif. It also supports the modification of a few attributes in a -libkexif: safe way that preserves all other EXIF information in the file. -libkexif: Authors and maintainers: -libkexif: Renchi Raju <renchi.raju at kdemail.net> -libkexif: Caulier Gilles <caulier dot gilles at free.fr> -libkexif: Ralf Hoelzer <kde at ralfhoelzer.com> -EOF - -# ----------------- Documentações ----------------------- -# Criar diretório de documentação -PKG_DOC=$PKG/usr/doc/$PACKAGE-$VERSION -mkdir -p $PKG_DOC -cp $PKG_DIR/{AUTHORS,COPYING,ChangeLog,INSTALL,NEWS,PACKAGING,README,RELEASE.rev} $PKG_DOC - -# --------------- Constroi o pacote --------------------- -echo -e "\n\n\033[01;32m makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz \n\033[m" -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz -if [ $? -ne 0 ]; then - exit $ERROR_MKPKG -fi - -# ----------- Remove arquivos temporários --------------- -if [ "$CLEANUP" = "yes" ]; then - echo -e "\n\n\033[01;32m Remove files... \n\033[m" - rm -rf $PKG $PKG_SRC -fi diff --git a/libs/libkipi/libkipi.SlackBuild b/libs/libkipi/libkipi.SlackBuild deleted file mode 100755 index 78fe1a19..00000000 --- a/libs/libkipi/libkipi.SlackBuild +++ /dev/null @@ -1,201 +0,0 @@ -#!/bin/bash -# -# slackbuild for libkipi, by Rudson R. Alves -# requires: none -# tested: libkipi-0.1.4 - -CWD=`pwd` - -# ---- Inicializa variáveis com o slackbuild ------------ -if [ -e "/root/.slackbuildrc" ]; then - source /root/.slackbuildrc -elif [ -e "/etc/slackbuildrc" ]; then - source /etc/slackbuildrc -fi - -# -------- Variáveis de controle de versão -------------- -# Nome da fonte para a qual o slackbuild foi construído e -# o seu md5sum -SRC_ORIG="libkipi-0.1.4.tar.bz2" -MD5_ORIG="2d8b8da064b85b0e53a98b4a7510392e" -PACKAGE_ORIG=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\1/'` -VERSION_ORIG=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\2/'` - EXTENSION=`echo $SRC_ORIG | sed -r 's/(.*)-(.*)\.(.*\..*)$/\3/'` - -# ------- Códigos de erro para o createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 -ERROR_PATCH=40; ERROR_VCS=41 - -# --------- Inicializa variáveis de entrada ------------- -PACKAGE=$PACKAGE_ORIG -ARCH=${ARCH:=i468} -SRC_DIR=${SRC:=$CWD} -VERSION=${VERSION:=$VERSION_ORIG} -SRC=$PACKAGE-$VERSION.$EXTENSION -BUILD=${BUILD:=1rud} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} -PREFIX=${PREFIX:=/opt/kde} -OPTCONF=${OPTCONF:=""} -MD5=${MD5:=$MD5_ORIG} -URL=${URL:="http://superb-west.dl.sourceforge.net/sourceforge/kipi/$SRC"} - -# ---------------- SlackBuild Help ---------------------- -if [ "$1" = "--help" -o "$1" = "help" ]; then - echo -e "\033[01;32m -Use: var1=\"value 1\" var2=\"value 2\" ... <package>.SlackBuild -where: - ARCH=machine arch (i386, i486, i686, ...) - VERSION=package version - BUILD=package build version (default 1rud) - SRC=source name of package - SRC_DIR=source directory (default $PWD) - TMP=temporary directory (default /tmp) - REPOS=repository directory - PREFIX=prefix from install package - OPTCONF=options to pass from ./configure. To configure - help, use OPTCONF=\"--help\" - MD5=md5sum from package source - URL=url from package source -\033[m" - exit $ERROR_HELP -fi - -# ---------------- Download fontes ---------------------- -# Fonte a ser compilada, com o path -SOURCE=$SRC_DIR/$PACKAGE/$SRC -# Verifica existência do pacote em $SRC em $SRC_DIR -if [ ! -e $SOURCE ]; then - echo -e "\n\n\033[01;32m Download $PACKAGE \n\033[m" - wget "$URL" -P "$SRC_DIR/$PACKAGE" - # Verifica se o - if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m No such source file in $URL\n\033[m" - exit $ERROR_WGET - fi -fi - -# ------------------ Checa md5sum ----------------------- -if [ "$SRC_ORIG" = "$SRC" -o "$MD5" != "$MD5_ORIG" -a "$MD5" != "no" ]; then - SUM=`md5sum $SOURCE | awk '{print $1}'` - if [ "$SUM" != "$MD5" ]; then - echo -e "\n\n\033[01;31m MD5SUM error: run Slackbuild again \n\033[m" - echo -e "\033[01;31m Remove $PACKAGE from $SRC_DIR and start Slackbuild again or use MD5=\"no\" \n\033[m" - exit 0 - fi - echo -e "\n\n\033[01;32m Md5sum Ok \n\033[m" -fi - -# ----------------- ARCH e LIBDIR ----------------------- -# Libdir, para arch x86_64 -LIBDIR=$PREFIX/lib -# Seleciona flags para o compilador -if [ "$ARCH" = "i386" ]; then - SLKCFLAGS="-O2 -march=i386 -mcpu=i686" -elif [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mcpu=i686" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686" -elif [ "$ARCH" = "s390" ]; then - SLKCFLAGS="-O2" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2" - LIBDIR="$PREFIX/lib64" -fi - -# -------------- Desempacota fontes --------------------- -# Desempacota fontes em PKG_SRC=$TMP/$PACKAGE-source -PKG_SRC=$TMP/$PACKAGE-source -rm -rf $PKG_SRC 2>/dev/null -mkdir -p $PKG_SRC -# Desempacota $SOURCE em $TMP/$PACKAGE-source -tar xvf $SOURCE -C $PKG_SRC -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m $SOURCE file error \n\033[m" - exit $ERROR_TAR -fi -# Pega o nome do diretório das fontes independente de sua -# estrutura (package-version...) -PKG_DIR="$PKG_SRC/$( ls $PKG_SRC/ )" -cd $PKG_DIR - -# -------------- Configura programa --------------------- -# Configura programa -echo -e "\n\n\033[01;32m CFLAGS=\"$SLKCFLAGS\" ./configure --prefix=$PREFIX --libdir=$LIBDIR $OPTCONF \n\033[m" -CFLAGS="$SLKCFLAGS" ./configure --prefix=$PREFIX --libdir=$LIBDIR $OPTCONF -if [ $? -ne 0 -o "$OPTCONF" = "--help" ]; then - echo -e "\n\n\033[01;31m Configure error \n\033[m" - exit $ERROR_CONF -fi - -# ---------------- Compila programa --------------------- -echo -e "\n\n\033[01;32m make -j3 \n\033[m" -make -j3 -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m Build error \n\033[m" - exit $ERROR_MAKE -fi - -# ------------- Diretório Temporário -------------------- -# Cria diretório temporário para construção do pacote -PKG=$TMP/$PACKAGE -rm -rf $PKG -mkdir -p $PKG - -# --------------- Instala programa ---------------------- -# Instala programa em diretório temporário -echo -e "\n\n\033[01;32m make install DESTDIR=$PKG \n\033[m" -make install DESTDIR=$PKG -if [ $? -ne 0 ]; then - echo -e "\n\n\033[01;31m Install error \n\033[m" - exit $ERROR_INSTALL -fi - -# ----------------- Stripa código ----------------------- -cd $PKG -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -# ---------------- Cria slack-desc ---------------------- -mkdir $PKG/install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |----handy-ruler------------------------------------------------------| -libkipi: LIBKIPI package, by Rudson R. Alves <rudsonalves[a]yahoo.com.br> -libkipi: -libkipi: -libkipi: -libkipi: -libkipi: -libkipi: -libkipi: -libkipi: -libkipi: -EOF - -# ----------------- Documentações ----------------------- -# Criar diretório de documentação -PKG_DOC=$PKG/usr/doc/$PACKAGE-$VERSION -mkdir -p $PKG_DOC -cp $PKG_DIR/{AUTHORS,COPYING,ChangeLog,INSTALL,NEWS,README,README.rev,TODO} $PKG_DOC - -# --------------- Constroi o pacote --------------------- -echo -e "\n\n\033[01;32m makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz \n\033[m" -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz -if [ $? -ne 0 ]; then - exit $ERROR_MKPKG -fi - -# ----------- Remove arquivos temporários --------------- -if [ "$CLEANUP" = "yes" ]; then - echo -e "\n\n\033[01;32m Remove files... \n\033[m" - rm -rf $PKG $PKG_SRC -fi diff --git a/libs/liblo/liblo.SlackBuild b/libs/liblo/liblo.SlackBuild deleted file mode 100755 index 74b7ddda..00000000 --- a/libs/liblo/liblo.SlackBuild +++ /dev/null @@ -1,121 +0,0 @@ -#!/bin/bash -# -# slackbuild script for liblo -# by rhatto at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building liblo are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="liblo" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=0.23} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - export LDFLAGS="-L/lib64 -L/usr/lib64" - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -# ------- error codes for createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 -ERROR_PATCH=40 - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://easynews.dl.sourceforge.net/sourceforge/$PACKAGE/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf $SRC_DIR/$SRC || exit $ERROR_TAR -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff || exit $ERROR_PATCH -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR || exit $ERROR_CONF -make || exit $ERROR_MAKE -make DESTDIR=$TMP/package-$PACKAGE install || exit $ERROR_INSTALL - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -liblo: liblo -liblo: -liblo: LibLO is a lightweight library for handling the sending and -liblo: receiving of messages according to the Open Sound Control (OSC) -liblo: protocol on POSIX systems. -liblo: -liblo: -liblo: -liblo: -liblo: -liblo: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -DOCS="AUTHORS COPYING ChangeLog NEWS README TODO" - -for file in $DOCS; do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/liblrdf/liblrdf.SlackBuild b/libs/liblrdf/liblrdf.SlackBuild deleted file mode 100755 index b64ab786..00000000 --- a/libs/liblrdf/liblrdf.SlackBuild +++ /dev/null @@ -1,119 +0,0 @@ -#!/bin/bash -# -# slackbuild script for liblrdf -# by rhatto at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building liblrdf are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="liblrdf" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=0.4.0} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - export LDFLAGS="-L/lib64 -L/usr/lib64" - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://easynews.dl.sourceforge.net/sourceforge/lrdf/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -liblrdf: liblrdf (lightweight RDF) -liblrdf: -liblrdf: Liblrdf is a lightweight RDF library with special support for -liblrdf: LADSPA plugins. -liblrdf: -liblrdf: -liblrdf: -liblrdf: -liblrdf: -liblrdf: -liblrdf: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in AUTHORS COPYING ChangeLog INSTALL NEWS README; do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/liblrdf/slack-required b/libs/liblrdf/slack-required deleted file mode 100644 index 6c92f463..00000000 --- a/libs/liblrdf/slack-required +++ /dev/null @@ -1 +0,0 @@ -ladspa diff --git a/libs/libquicktime/libquicktime.SlackBuild b/libs/libquicktime/libquicktime.SlackBuild deleted file mode 100755 index 7e5e2797..00000000 --- a/libs/libquicktime/libquicktime.SlackBuild +++ /dev/null @@ -1,118 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libquicktime -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libquicktime are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libquicktime" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=0.9.10} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://ufpr.dl.sourceforge.net/sourceforge/libquicktime/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --enable-gpl --sysconfdir=/etc --libdir=$LIBDIR --with-docdir=/usr/doc/$PACKAGE-$VERSION -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libquicktime: libquicktime (libquicktime is a library for quicktime/avi/mp4 files) -libquicktime: -libquicktime: libquicktime is a library for reading and writing quicktime files. -libquicktime: It is based on the quicktime4linux library, with the following some -libquicktime: extensions: -libquicktime: -libquicktime: -libquicktime: -libquicktime: -libquicktime: http://libquicktime.sourceforge.net/ -libquicktime: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in AUTHORS COPYING ChangeLog INSTALL NEWS README TODO;do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libraw1394/libraw1394.SlackBuild b/libs/libraw1394/libraw1394.SlackBuild deleted file mode 100755 index a17751ff..00000000 --- a/libs/libraw1394/libraw1394.SlackBuild +++ /dev/null @@ -1,119 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libraw1394 -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libraw1394 are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libraw1394" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=1.2.1} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://www.linux1394.org/dl/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libraw1394: libraw1394 (provides direct access to the IEEE 1394 bus) -libraw1394: -libraw1394: Libraw1394 provides direct access to the IEEE 1394 bus through the -libraw1394: Linux 1394 subsystem's raw1394 user space interface. -libraw1394: -libraw1394: -libraw1394: -libraw1394: -libraw1394: http://linux1394.sourceforge.net/ -libraw1394: -libraw1394: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION -mv usr/doc/* usr/doc/$PACKAGE-$VERSION - -for file in ChangeLog COPYING.LIB AUTHORS NEWS README ;do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/librsync/librsync.SlackBuild b/libs/librsync/librsync.SlackBuild deleted file mode 100755 index 2e6955ed..00000000 --- a/libs/librsync/librsync.SlackBuild +++ /dev/null @@ -1,105 +0,0 @@ -#!/bin/bash -# -# slackbuild script for librsync -# by rhatto at riseup.net -# - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="librsync" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=0.9.7} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 - export CFLAGS=-fPIC -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://easynews.dl.sourceforge.net/sourceforge/librsync/$SRC" - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR -make all check -make DESTDIR=$TMP/package-$PACKAGE/$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE/$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -librsync: librsync -librsync: -librsync: librsync implements the rolling-checksum algorithm of remote file -librsync: synchronization that was popularized by the rsync utility and is used -librsync: in rproxy. This algorithm transfers the differences between 2 files -librsync: without needing both files on the same system. -librsync: -librsync: -librsync: -librsync: -librsync: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in AUTHORS COPYING ChangeLog NEWS README README.CVS README.RPM THANKS TODO; do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -echo 'chroot . /sbin/ldconfig' > install/doinst.sh - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libsafe/doinst.sh b/libs/libsafe/doinst.sh deleted file mode 100644 index 813767b3..00000000 --- a/libs/libsafe/doinst.sh +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/sh - -# libmove sourcelib targetlib -# -# This allows you to move a new shared library into place, -# even on a running system. -libmove() { - LIBSOURCE=$1 - LIBTARGET=$2 - LIBFOO="`dirname $LIBTARGET`/libfoo.so.0.0.0" - # link duplicate of target lib so we can safely copy over it: - if [ -r $LIBTARGET ]; then - cp -a $LIBTARGET $LIBFOO - if [ -x /sbin/ldconfig ]; then - ldconfig -l $LIBFOO 2> /dev/null - fi - fi - mv $LIBSOURCE $LIBTARGET - if [ -x /sbin/ldconfig ]; then - ldconfig -l $LIBTARGET 2> /dev/null - fi - rm -f $LIBFOO -} - -# Before using libmove, try to install everything we can: -( cd lib/incoming - for file in * ; do - if [ ! -r ../$file ]; then - cp -a $file .. - fi - done ) -# Prepare the library for use with ldconfig: -if [ -x sbin/ldconfig ]; then - chroot . /sbin/ldconfig -fi - -( cd lib/incoming - for file in * ; do - libmove $file ../$file - done ) -#### Now, get rid of the temporary directory: -rm -rf lib/incoming - -# add the library to /etc/ld.so.preload: -if fgrep libsafe.so.2 etc/ld.so.preload 1> /dev/null 2> /dev/null ; then - GOOD=we_found_it -else - echo "/lib/libsafe.so.2" >> etc/ld.so.preload -fi - -# Prepare the library for use with ldconfig: -if [ -x sbin/ldconfig ]; then - chroot . /sbin/ldconfig -else # In case there's no ldconfig, make the links manually: - ( cd lib ; rm -rf libsafe.so.2 ) - ( cd lib ; ln -sf libsafe.so.2.0.9 libsafe.so.2 ) -fi diff --git a/libs/libsafe/doinst64.sh b/libs/libsafe/doinst64.sh deleted file mode 100644 index a5d753a9..00000000 --- a/libs/libsafe/doinst64.sh +++ /dev/null @@ -1,57 +0,0 @@ -#!/bin/sh - -# libmove sourcelib targetlib -# -# This allows you to move a new shared library into place, -# even on a running system. -libmove() { - LIBSOURCE=$1 - LIBTARGET=$2 - LIBFOO="`dirname $LIBTARGET`/libfoo.so.0.0.0" - # link duplicate of target lib so we can safely copy over it: - if [ -r $LIBTARGET ]; then - cp -a $LIBTARGET $LIBFOO - if [ -x /sbin/ldconfig ]; then - ldconfig -l $LIBFOO 2> /dev/null - fi - fi - mv $LIBSOURCE $LIBTARGET - if [ -x /sbin/ldconfig ]; then - ldconfig -l $LIBTARGET 2> /dev/null - fi - rm -f $LIBFOO -} - -# Before using libmove, try to install everything we can: -( cd lib64/incoming - for file in * ; do - if [ ! -r ../$file ]; then - cp -a $file .. - fi - done ) -# Prepare the library for use with ldconfig: -if [ -x sbin/ldconfig ]; then - chroot . /sbin/ldconfig -fi - -( cd lib64/incoming - for file in * ; do - libmove $file ../$file - done ) -#### Now, get rid of the temporary directory: -rm -rf lib64/incoming - -# add the library to /etc/ld.so.preload: -if fgrep libsafe.so.2 etc/ld.so.preload 1> /dev/null 2> /dev/null ; then - GOOD=we_found_it -else - echo "/lib64/libsafe.so.2" >> etc/ld.so.preload -fi - -# Prepare the library for use with ldconfig: -if [ -x sbin/ldconfig ]; then - chroot . /sbin/ldconfig -else # In case there's no ldconfig, make the links manually: - ( cd lib64 ; rm -rf libsafe.so.2 ) - ( cd lib64 ; ln -sf libsafe.so.2.0.9 libsafe.so.2 ) -fi diff --git a/libs/libsafe/libsafe.SlackBuild b/libs/libsafe/libsafe.SlackBuild deleted file mode 100755 index 2dd83b40..00000000 --- a/libs/libsafe/libsafe.SlackBuild +++ /dev/null @@ -1,74 +0,0 @@ -#!/bin/bash -# -# got it from ftp://ftp.slackware.com/pub/slackware/slackware-10.2/extra/source/libsafe-2.0-16/libsafe.SlackBuild -# small changes by rhatto -# - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -PACKAGE="libsafe" -ARCH=${ARCH:=i486} -BUILD=${BUILD:=1rha} -TMP=${TMP:=/tmp} -VERSION=2.0.16 -SRCPKG=2.0-16 -SRC_DIR=${SRC:=$CWD} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=lib64 - DOINST="doinst64.sh" -else - LIBDIR=lib - DOINST="doinst.sh" -fi - -RTOOL="wget" -SRC="$PACKAGE-$SRCPKG.tar.gz" -URL="ftp://ftp.slackware.com/pub/slackware/slackware-10.2/extra/source/libsafe-$SRCPKG/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -PKG=$TMP/package-$PACKAGE -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xzvf $SRC_DIR/$SRC -cd libsafe-$SRCPKG - -chown -R root.root . -find . -perm 775 -exec chmod 755 {} \; -find . -perm 664 -exec chmod 644 {} \; -make || exit 32 -mkdir -p $PKG/$LIBDIR/incoming -cat src/libsafe.so.$VERSION > $PKG/$LIBDIR/incoming/libsafe.so.$VERSION -chmod 755 $PKG/$LIBDIR/incoming/libsafe.so.$VERSION -mkdir $PKG/install -cat $CWD/$DOINST > $PKG/install/doinst.sh -cat $CWD/slack-desc > $PKG/install/slack-desc -mkdir -p $PKG/usr/doc/libsafe-$VERSION -cp -a \ - COPYING ChangeLog EMAIL_NOTIFICATION INSTALL README doc \ - $PKG/usr/doc/libsafe-$VERSION -mkdir -p $PKG/usr/man/man8 -cat doc/libsafe.8 | gzip -9c > $PKG/usr/man/man8/libsafe.8.gz -cd $PKG -makepkg -l y -c n $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libsafe/slack-desc b/libs/libsafe/slack-desc deleted file mode 100644 index 5cf1c752..00000000 --- a/libs/libsafe/slack-desc +++ /dev/null @@ -1,19 +0,0 @@ -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' on -# the right side marks the last column you can put a character in. You must make -# exactly 11 lines for the formatting to be correct. It's also customary to -# leave one space after the ':'. - - |-----handy-ruler------------------------------------------------------| -libsafe: libsafe -libsafe: -libsafe: The libsafe library protects a process against the exploitation of -libsafe: buffer overflow vulnerabilities in process stacks and against format -libsafe: string exploits. Libsafe works with any existing pre-compiled -libsafe: executable and can be used transparently, even on a system-wide basis. -libsafe: The method intercepts all calls to library functions that are known to -libsafe: be vulnerable. Libsafe has been shown to detect several known attacks -libsafe: and can potentially prevent yet unknown attacks. Experiments indicate -libsafe: that the performance overhead of libsafe is negligible. -libsafe: diff --git a/libs/libsamplerate/libsamplerate.SlackBuild b/libs/libsamplerate/libsamplerate.SlackBuild deleted file mode 100755 index 4d233127..00000000 --- a/libs/libsamplerate/libsamplerate.SlackBuild +++ /dev/null @@ -1,118 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libsamplerate -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libsamplerate are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libsamplerate" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=0.1.2} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://www.mega-nerd.com/SRC/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR --with-docdir=/usr/doc/$PACKAGE-$VERSION -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libsamplerate: libsamplerate (libsamplerate is library for samplerate conversions) -libsamplerate: -libsamplerate: Secret Rabbit Code (aka libsamplerate) is a Sample Rate Converter -libsamplerate: for audio. One example of where such a thing would be useful is -libsamplerate: converting audio from the CD sample rate of 44.1kHz to the 48kHz -libsamplerate: sample rate used by DAT players. -libsamplerate: SRC is capable of arbitrary and time varying conversions ; from -libsamplerate: downsampling by a factor of 256 to upsampling by the same factor. -libsamplerate: Arbitrary in this case means that the ratio of input and output -libsamplerate: sample rates can be an irrational number. The conversion ratio can -libsamplerate: also vary with time for speeding up and slowing down effects. -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in AUTHORS COPYING ChangeLog INSTALL NEWS README;do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libshout/libshout.SlackBuild b/libs/libshout/libshout.SlackBuild deleted file mode 100755 index c4ebfd1e..00000000 --- a/libs/libshout/libshout.SlackBuild +++ /dev/null @@ -1,119 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libshout -# by rhatto at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libshout are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libshout" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=2.2.2} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - export LDFLAGS="-L/lib64 -L/usr/lib64" - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://downloads.us.xiph.org/releases/libshout/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --libdir=$LIBDIR -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libshout: libshout -libshout: -libshout: Library which can be used to write a source client like ices -libshout: -libshout: -libshout: -libshout: -libshout: -libshout: -libshout: http://www.icecast.org/download.php -libshout: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in COPYING INSTALL NEWS README TODO; do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libsndfile/libsndfile.SlackBuild b/libs/libsndfile/libsndfile.SlackBuild deleted file mode 100755 index bbda4b2a..00000000 --- a/libs/libsndfile/libsndfile.SlackBuild +++ /dev/null @@ -1,118 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libsndfile -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libsndfile are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libsndfile" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=1.0.17} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://www.mega-nerd.com/libsndfile/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR --with-docdir=/usr/doc/$PACKAGE-$VERSION -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libsndfile: libsndfile (libsndfile is a library for audio manipulation) -libsndfile: -libsndfile: Libsndfile is a C library for reading and writing files containing -libsndfile: sampled sound (such as MS Windows WAV and the Apple/SGI AIFF format) -libsndfile: through one standard library interface. It is released in source -libsndfile: code format under the Gnu Lesser General Public License. -libsndfile: -libsndfile: -libsndfile: -libsndfile: http://www.mega-nerd.com/libsndfile/ -libsndfile: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in AUTHORS COPYING ChangeLog INSTALL NEWS README TODO;do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libtheora/libtheora.SlackBuild b/libs/libtheora/libtheora.SlackBuild deleted file mode 100755 index af1a33b6..00000000 --- a/libs/libtheora/libtheora.SlackBuild +++ /dev/null @@ -1,132 +0,0 @@ -#!/bin/bash -# -# Heavily based on the Slackware 10.2 SlackBuild -# http://www.theora.org -# -# bumped to version 1.0alpha7 - rafael2k -# -# got it from http://www.slacky.it/download/libraries/libtheora/1.0alpha5/src/libtheora.SlackBuild -# small changes by rhatto -# - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -PACKAGE="libtheora" -VERSION=${VERSION:=1.0alpha7} -ARCH=${ARCH:-i486} -TARGET=${TARGET:=$ARCH} -BUILD=${BUILD:=1rha} -TMP=${TMP:=/tmp} -SRC_DIR=${SRC:=$CWD} -REPOS=${REPOS:=$TMP} - -RTOOL="wget" -PACKAGE_EXT="bz2" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://downloads.xiph.org/releases/theora/$SRC" - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mcpu=i686" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mcpu=i686" -elif [ "$ARCH" = "x86_64" ]; then - SLKCFLAGS="-O2" -fi - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR="/usr/lib64" -else - LIBDIR="/usr/lib" -fi - -if [ ! -d $TMP ]; then - mkdir -p $TMP -fi - -if [ ! -d $PKG ]; then - mkdir -p $PKG -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -NAME="$PACKAGE" -PKG=$TMP/package-$PACKAGE - -tar xvf$tarflag $SRC_DIR/$SRC -cd $NAME-$VERSION -chown -R root.root . - -find . -perm 777 -exec chmod 755 {} \; - -CFLAGS="$SLKCFLAGS" CXXFLAGS="$SLKCFLAGS" \ -./configure --prefix=/usr --disable-static --libdir=$LIBDIR --program-prefix="" --program-suffix="" $TARGET-slackware-linux - -make || exit 32 -make install DESTDIR=$PKG - -mkdir -p $PKG/usr/doc/$NAME-$VERSION -mv $PKG/usr/share/doc/$NAME-$VERSION/* $PKG/usr/doc/$NAME-$VERSION -cp -a COPYING README $PKG/usr/doc/$NAME-$VERSION -rm -rf $PKG/usr/share -ln -sf /usr/lib/libtheora.so.0.2.0 $PKG/usr/lib/libtheora.so - -( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -) - -mkdir -p $PKG/install -cat << EOF > $PKG/install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also customary -# to leave one space after the ':'. - - |----handy-ruler-----------------------------------------------------| -libtheora: Libtheora -libtheora: -libtheora: Theora is an open video codec being developed by the Xiph.org -libtheora: Foundation as part of their Ogg project (It is a project that aims -libtheora: to integrate On2's VP3 video codec, Ogg Vorbis audio codec and Ogg -libtheora: multimedia container formats into a multimedia solution that can -libtheora: compete with MPEG-4 format). -libtheora: -libtheora: -libtheora: -libtheora: -EOF - -cd $PKG - -echo 'chroot . /sbin/ldconfig' > install/doinst.sh - -makepkg -l y -c n $REPOS/$NAME-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libx264/libx264.SlackBuild b/libs/libx264/libx264.SlackBuild deleted file mode 100755 index 03edfbfa..00000000 --- a/libs/libx264/libx264.SlackBuild +++ /dev/null @@ -1,121 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libx264 -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libx264 are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap - else - echo Sleeping 3 seconds... - sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libx264" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=20061004} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="bz2" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="ftp://ftp.videolan.org/pub/videolan/x264/snapshots/x264-snapshot-$VERSION-2245.tar.$PACKAGE_EXT" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC - -mv x264-snapshot-$VERSION-2245 $PACKAGE-$VERSION - -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --enable-shared --enable-visualize --enable-pic --sysconfdir=/etc --libdir=$LIBDIR --with-docdir=/usr/doc/$PACKAGE-$VERSION -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libx264: libx264 (x264 is a free library for encoding H264/AVC video streams) -libx264: -libx264: x264 is a free library for encoding H264/AVC video streams. The code -libx264: is written from scratch by Laurent Aimar, Loren Merritt, Eric Petit -libx264: (OS X), Min Chen (vfw/asm), Justin Clay (vfw), Måns Rullgård, Radek -libx264: Czyz, Christian Heine (asm), Alex Izvorski, and Alex Wright. It is -libx264: released under the terms of the GPL license. -libx264: -libx264: -libx264: http://developers.videolan.org/x264.html -libx264: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in AUTHORS COPYING;do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libx264/slack-required b/libs/libx264/slack-required deleted file mode 100644 index eff8d5c7..00000000 --- a/libs/libx264/slack-required +++ /dev/null @@ -1 +0,0 @@ -yasm |