backupninja: updated rub handler

git-svn-id: svn+slack://slack.fluxo.info/var/svn/slackbuilds@302 370017ae-e619-0410-ac65-c121f96126d4

1 files changed, 170 insertions, 40 deletions

diff --git a/backupninja/rub b/backupninja/rub
index e141b7b5..c68dee80 100644
--- a/backupninja/rub
+++ b/backupninja/rub
@@ -5,8 +5,9 @@
 #   http://www.mikerubel.org/computers/rsync_snapshots/
 #
 # feedback: rhatto at riseup.net | gpl
+# lot of enhancements grabbed from "rsnap" handler by paulv at bikkel.org
 #
-# config file options
+# Config file options
 # -------------------
 #
 #   [general]
@@ -18,23 +19,49 @@
 #   backupdir = folder relative do $mountpoint where the backup should be stored
 #   days = number of backup increments (min = 5)
 #   lockfile = lockfile to be kept during backup execution
+#   enable_mv_timestamp_bug = set to "yes" if your system isnt handling timestamps correctly
+#   tmp = temp folder
 #
 #   [source]
+#   from = local or remote
+#   testconnect = when "yes", test the connection for a remote source before backup
 #   include = include folder on backup
 #   exclude = exclude folder on backup
-#   from = local or remote
 #   ssh = ssh command line (remote only)
-#   rsync = rsync command line
+#   rsync = rsync program
+#   rsync_options = rsync command options
 #   exclude_vserver = vserver-name (valid only if vservers = yes on backupninja.conf)
+#   numericids = when set to 1, use numeric ids instead of user/group mappings on rsync
+#   compress = if set to 1, compress data on rsync (remote source only)
+#   bandwidthlimit = set a badnwidth limit in kbps (remote source only)
+#   remote_rsync = remove rsync program (remote source only)
 #
 #   [services]
 #   initscripts = absolute path where scripts are located
 #   service = script name to be stoped at the begining of the backup and started at its end
 #
+# You can also specify some system comands:
+#
+#   [system]
+#   rm = rm command
+#   cp = cp command
+#   touch = touch command
+#   mv = mv command
+#   fsck = fsck command
+#
 # You dont need to manually specify vservers using "include = /vservers".
 # They are automatically backuped if vserver is set to "yes" on you backupninja.conf.
 #
 
+# config file evaluation
+
+setsection system
+getconf rm rm
+getconf cp cp
+getconf touch touch
+getconf mv mv
+getconf fsck fsck
+
 setsection general
 getconf log /var/log/backupninja-rub.log
 getconf partition
@@ -45,82 +72,173 @@ getconf backupdir
 getconf rotate
 getconf days
 getconf lockfile
+getconf nicelevel 0
+getconf enable_mv_timestamp_bug no
+getconf tmp /tmp
 
 setsection source
 getconf from local
-getconf rsync "rsync -av --delete"
+getconf testconnect no
+getconf rsync $RSYNC
+getconf rsync_options "-av --delete"
 getconf ssh ssh
 getconf user
 getconf host
 getconf include
 getconf exclude
 getconf exclude_vserver
+getconf numericids 0
+getconf compress 0
+getconf bandwidthlimit
+getconf remote_rsync rsync
 
 setsection services
 getconf initscripts
 getconf service
 
+# function definitions
+
+function rotate {
+
+  # TODO: force to an absolute path
+
+  if [[ "$2" < 4 ]]; then
+    error "Rotate: minimum of 4 rotations"
+    exit 1
+  fi
+
+  if [ -d $1.$2 ]; then
+    $nice $mv $1.$2 $1.tmp
+  fi
+
+  for ((n=`echo "$2 - 1" | bc`; n >= 0; n--)); do
+    if [ -d $1.$n ]; then
+      dest=`echo "$n + 1" | bc`
+      $nice $mv $1.$n $1.$dest
+      $touch $1.$dest
+    fi
+  done
+
+  if [ -d $1.tmp ]; then
+    $nice $mv $1.tmp $1.0
+  fi
+
+  if [ -d $1.1 ]; then
+    $nice $cp -alf $1.1/. $1.0
+  fi
+
+}
+
+function move_files {
+
+ ref=$tmp/makesnapshot-mymv-$$;
+ $touch -r $1 $ref;
+ $mv $1 $2;
+ $touch -r $ref $2;
+ $rm $ref;
+
+}
+
 backupdir="$mountpoint/$backupdir"
 
+# does $backupdir exists?
+
 if [ ! -d "$backupdir" ]; then 
   error "Backupdir $backupdir does not exist"
   exit 1
 fi
 
+# setup number of increments
+
 if [ -z "$days" ]; then
   keep="4"
 else
   keep="`echo $days - 1 | bc -l`"
 fi
 
+# lockfile setup
+
 if [ ! -z "$lockfile" ]; then
-  touch $lockfile || warning "Could not create lockfile $lockfile"
+  $touch $lockfile || warning "Could not create lockfile $lockfile"
 fi
 
-for path in $exclude; do
-  EXCLUDES="$EXCLUDES --exclude=$path"
-done
+# nicelevel setup
 
-if [ ! -z "$service" ]; then
-  for daemon in $service; do
-    info "Stopping service $daemon..."
-    $initscripts/$daemon stop
-  done
+if [ ! -z "$nicelevel" ]; then 
+  nice="nice -n $nicelevel"
+else 
+  nice=""
 fi
 
-function rotate {
-
-  # please use an absolute path
+# connection test
 
-  if [[ "$2" < 4 ]]; then
-    error "Rotate: minimum of 4 rotations"
-    exit 1
+if [ "$from" == "remote" ] && [ "$testconnect" == "yes" ]; then
+  debug "$ssh -o PasswordAuthentication=no $user@$host 'echo -n 1'"
+  result=`ssh -o PasswordAuthentication=no $user@$host 'echo -n 1'`
+  if [ "$result" != "1" ]; then
+    fatal "Can't connect to $host as $user."
+  else
+    debug "Connected to $srchost successfully"
   fi
+fi
 
-  if [ -d $1.$2 ]; then
-    mv $1.$2 $1.tmp
+# rsync options for local sources
+
+if [ "$from" == "local" ]; then
+
+  rsync_local_options="$rsync_options"
+
+  if [ ! -z "$numericids" ]; then
+    rsync_local_options="$rsync_local_options --numeric-ids "
   fi
 
-  for ((n=`echo "$2 - 1" | bc`; n >= 0; n--)); do
-    if [ -d $1.$n ]; then
-      dest=`echo "$n + 1" | bc`
-      mv $1.$n $1.$dest
-      touch $1.$dest
-    fi
-  done
+fi
 
-  if [ -d $1.tmp ]; then
-    mv $1.tmp $1.0
+# rsync options for remote sources
+
+if [ "$from" == "remote" ]; then
+
+  rsync_remote_options="$rsync_options --rsync-path=$remote_rsync"
+
+  if [ "$compress" == "1" ]; then
+    rsync_remote_options="$rsync_remote_options --compress"
   fi
 
-  if [ -d $1.1 ]; then
-    cp -alf $1.1/. $1.0
+  fi [ ! -z "$bandwidthlimit" ]; then
+    rsync_remote_options="$rsync_remote_options --bwlimit=$bandwidthlimit"
   fi
 
-}
+  if [ ! -z "$numericids" ]; then
+    rsync_remote_options="$rsync_remote_options --numeric-ids"
+  fi
+
+fi
+
+# set mv procedure
+
+if [ $enable_mv_timestamp_bug == "yes" ]; then
+  mv=move_files
+fi
+
+# set excludes
+
+for path in $exclude; do
+  EXCLUDES="$EXCLUDES --exclude=$path"
+done
+
+# stop services
+
+if [ ! -z "$service" ]; then
+  for daemon in $service; do
+    info "Stopping service $daemon..."
+    $initscripts/$daemon stop
+  done
+fi
 
 echo "Starting backup at `date`" >> $log
 
+# mount backup destination folder as read-write
+
 if [ "$read_only" == "1" ] || [ "$read_only" == "yes" ]; then
   if [ -d "$mountpoint" ]; then
     mount -o remount,rw $mountpoint
@@ -131,6 +249,8 @@ if [ "$read_only" == "1" ] || [ "$read_only" == "yes" ]; then
   fi
 fi
 
+# add vservers to included folders
+
 if [ "$vservers_are_available" == "yes" ]; then
 
   # sane permission on backup
@@ -153,6 +273,8 @@ if [ "$vservers_are_available" == "yes" ]; then
   done
 fi
 
+# the backup procedure
+
 for SECTION in $include; do
 
   section="`basename $SECTION`"
@@ -167,8 +289,8 @@ for SECTION in $include; do
   info "Syncing $SECTION on $backupdir/$SECTION/$section.0..."
 
   if [ "$from" == "local" ]; then
-    debug $rsync $EXCLUDES /$SECTION/ $backupdir/$SECTION/$section.0/ 
-    $rsync $EXCLUDES /$SECTION/ $backupdir/$SECTION/$section.0/ >> $log
+    debug $rsync $rsync_local_options $EXCLUDES /$SECTION/ $backupdir/$SECTION/$section.0/ 
+    $nice $rsync $rsync_local_options $EXCLUDES /$SECTION/ $backupdir/$SECTION/$section.0/ >> $log
     if [ "$?" != "0" ]; then
       warning "Rsync error when trying to transfer $SECTION"
     fi
@@ -177,8 +299,8 @@ for SECTION in $include; do
       error "Config file error: either user or host was not specified"
       exit 1
     else
-      debug $rsync $EXCLUDES -e "$ssh" $user@$host:/$SECTION/ $backupdir/$SECTION/$section.0
-      $rsync $EXCLUDES -e "$ssh" $user@$host:/$SECTION/ $backupdir/$SECTION/$section.0 >> $log
+      debug $nice $rsync $rsync_remote_options $EXCLUDES -e "$ssh" $user@$host:/$SECTION/ $backupdir/$SECTION/$section.0
+      $nice $rsync $rsync_remote_options $EXCLUDES -e "$ssh" $user@$host:/$SECTION/ $backupdir/$SECTION/$section.0 >> $log
       if [ "$?" != "0" ]; then
         warning "Rsync error when trying to transfer $SECTION"
       fi
@@ -188,24 +310,30 @@ for SECTION in $include; do
     exit 1
   fi
 
-  touch $backupdir/$SECTION/$section.0
+  $touch $backupdir/$SECTION/$section.0
 
 done
 
+# remount backup destination as read-only
+
 if [ "$read_only" == "1" ] || [ "$read_only" == "yes" ]; then
   mount -o remount,ro $mountpoint
 fi
 
+# check partition for errors
+
 if [ "$fsck" == "1" ] || [ "$fsck" == "yes" ]; then
   umount $mountpoint
   if (($?)); then
     warning "Could not umount $mountpoint to run fsck"
   else
-    fsck -v -y $partition >> $log
+    $nice $fsck -v -y $partition >> $log
     mount $mountpoint
   fi
 fi
 
+# restart services
+
 if [ ! -z "$service" ]; then
   for daemon in $service; do
     info "Starting service $daemon..."
@@ -213,8 +341,10 @@ if [ ! -z "$service" ]; then
   done
 fi
 
+# removes the lockfile
+
 if [ ! -z "$lockfile" ]; then
-  rm $lockfile || warning "Could not remove lockfile $lockfile"
+  $rm $lockfile || warning "Could not remove lockfile $lockfile"
 fi
 
 echo "Finnishing backup at `date`" >> $log