path: root/trunk/src/simplaret

#!/bin/bash
#
# simplaret v0.3: simplepkg's retrieval tool
# feedback: rhatto at riseup.net | gpl
#
#  Simplaret is free software; you can redistribute it and/or modify it under the
#  terms of the GNU General Public License as published by the Free Software
#  Foundation; either version 2 of the License, or any later version.
#
#  Simplaret is distributed in the hope that it will be useful, but WITHOUT ANY
#  WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
#  A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
#
#  You should have received a copy of the GNU General Public License along with
#  this program; if not, write to the Free Software Foundation, Inc., 59 Temple
#  Place - Suite 330, Boston, MA 02111-1307, USA
#

BASENAME="`basename $0`"
COMMON="/usr/libexec/simplepkg/common.sh"

if [ -f "$COMMON" ]; then
  source $COMMON
else
  echo "error: file $COMMON found, check your $BASENAME installation"
  exit 1
fi

if [ -f "/etc/simplepkg/repos.conf" ]; then
  REPOS_CONF="/etc/simplepkg/repos.conf"
else
  REPOS_CONF="/etc/simplepkg/default/repos.conf"
fi

function simplaret_usage {

  echo "usage: [ARCH=otherarch] [VERSION=otherversion] $BASENAME [OPTION] package-name"
  echo -e "\t OPTIONS: --help, --install, --update (or --sync), --upgrade, --search, --get, --get-patches, --purge, --remove"
  exit 1

}

function simplaret_get_index {

  for file in `simplaret_metafiles`; do
    simplaret_download $1 $file $2 --no-verbose
  done

}

function simplaret_backup_index {

  for file in `simplaret_metafiles`; do
    if [ -f "$1/$file" ]; then
      mv $1/$file $1/$file.old
    fi
  done

}

function simplaret_check_index {

  for file in `simplaret_metafiles`; do
    if [ ! -f "$1/$file" ] && [ -f "$1/$file" ]; then
      echo restoring old $file to $1...
      mv $1/$file.old $1/$file
     else
      rm -f $1/$file.old
    fi
  done

}

function simplaret_download {

  # download a file from a repo to a folder
  # usage: simplaret <repository_url> <package> <destination-folder> [--no-verbose]

  local protocol file
  local wget_timeout wget_passive_ftp wget_verbose
  local curl_timeout curl_passive_ftp curl_verbose
  local ncftpget_timeout ncftpget_passive_ftp

  protocol="`echo $1 | cut -d : -f 1`"
  file="`basename $2`"

  if [ ! -d "$3" ]; then
    mkdir -p $3
  fi

  if [ ! -z "$CONNECT_TIMEOUT" ] || [ "$CONNECT_TIMEOUT" != "0" ]; then
    wget_timeout="--timeout $CONNECT_TIMEOUT"
    ncftpget_timeout="-t $CONNECT_TIMEOUT"
    curl_timeout="--connect-timeout $CONNECT_TIMEOUT"
  fi

  if [ "$4" == "--no-verbose" ]; then
    wget_verbose="--no-verbose"
    curl_verbose="-#"
    echo ""
  fi

  if [ "$protocol" == "http" ]; then

    echo Getting $1/$2:
    if [ "$HTTP_TOOL" == "wget" ]; then
      wget $wget_timeout $wget_verbose $1/$2 -O $3/$file
    elif [ "$HTTP_TOOL" == "curl" ]; then
      curl $curl_timeout $curl_verbose $1/$2 > $3/$file
    else
      echo $BASENAME: error: invalid value for config variable HTTP_TOOL: $HTTP_TOOL
      echo $BASENAME: please check your config file $CONF
      exit 1
    fi

  elif [ "$protocol" == "ftp" ]; then
    echo Getting $1/$2:

    if [ "$PASSIVE_FTP" == "1" ]; then
      wget_passive_ftp="--passive-ftp"
      ncftpget_passive_ftp="-F"
      curl_passive_ftp="--ftp-pasv"
    fi 

    if [ "$FTP_TOOL" == "ncftpget" ]; then
      ncftpget -c $ncftpget_timeout $ncftpget_passive_ftp $1/$2 > $3/$file
    elif [ "$FTP_TOOL" == "wget" ]; then
      wget $wget_timeout $wget_passive_ftp $wget_verbose $1/$2 -O $3/$file
    elif [ "$FTP_TOOL" == "curl" ]; then
      curl $curl_timeout $curl_passive_ftp $curl_verbose $1/$2 > $3/$file
    else
      echo $BASENAME: error: invalid value for config variable FTP_TOOL: $FTP_TOOL
      echo $BASENAME: please check your config file $CONF
      exit 1
    fi

  elif [ "$protocol" == "file" ]; then

    url="`echo $1 | sed -e 's/file:\/\///'`"
    if [ -f "$3/$file" ]; then
      rm -f $3/$file
    fi
    echo -n "Copying $url/$2..."
    if [ -f "$url/$2" ]; then
      cp $url/$2 $3/$file 2> /dev/null
    fi
    if [ -f "$3/$file" ]; then
      echo " done."
    else
      echo " failed."
    fi

  else

    echo $BASENAME error: invalid protocol $protocol

  fi

}

function simplaret_repository {

  # return a repository definition from $REPOS_CONF file
  # usage: simplaret_repository [root|repos|noarch|patches]

  local definition

  if [ -z "$1" ]; then
    definition="ROOT"
  else
    definition="`echo $1 | tr '[:lower:]' '[:upper:]'`"
  fi

  if [ "$definition" == "REPOS" ] || [ "$definition" == "PATCHES" ]; then
    definition="$definition-$ARCH-$VERSION"
  elif [ "$definition" == "ROOT" ]; then
    definition="$definition-$ARCH"
  fi

  grep -e "^$definition=" $REPOS_CONF | cut -d = -f 2 | sed -e 's/"//g' -e "s/'//g" | cut -d "#" -f 1

}

function simplaret_repository_name {

  # return a repository name according the value of $repository

  if [ -z "$repository" ]; then
    false
  elif echo $repository | grep -qe %; then
    repository_name="`echo $repository | cut -d % -f 1`"
    if [ -z "$repository_name" ]; then
      echo $BASENAME: you should set a name for the repository $repository
      echo $BASENAME: please correct your $REPOS_CONF
      exit 1
    fi
  else
    echo $BASENAME: you should set a name for the repository $repository
    echo $BASENAME: please correct your $REPOS_CONF
    exit 1
  fi

}

function simplaret_repository_url {

  # return a repository url according the value of $repository

  if echo $repository | grep -qe %; then
    repository_url="`echo $repository | cut -d % -f 2`"
    if [ -z "$repository_url" ]; then
      echo $BASENAME: you should set a url for the repository $repository
      echo $BASENAME: please correct your $REPOS_CONF
      exit 1
    fi
  else
    echo $BASENAME: you should set a url for the repository $repository
    echo $BASENAME: please correct your $REPOS_CONF
    exit 1
  fi

  if [ "$repos_type" == "root" ]; then
    simplaret_set_arch
    repository_url="$repository_url/`basename $repository_url`-$VERSION/"
  fi

}

function simplaret_set_storage_folder {

  storage="$STORAGE/$ARCH/$VERSION/$repos_type"
  if [ "$repos_type" == "noarch" ]; then
    storage="$STORAGE/noarch"
  elif [ "$repos_type" == "patches" ]; then
    storage="$PATCHES_DIR/$ARCH/$VERSION"
  fi

}

function simplaret_update {

  local storage

  echo Updating package information for arch $ARCH and version $VERSION... 

  for repos_type in patches root repos noarch; do

    simplaret_set_storage_folder

    for repository in `simplaret_repository $repos_type`; do

      simplaret_repository_name
      simplaret_repository_url

      if [ ! -d "$storage/$repository_name" ]; then
        mkdir -p $storage/$repository_name
      else
        simplaret_backup_index $storage/$repository_name
      fi

      simplaret_get_index $repository_url $storage/$repository_name
      simplaret_check_index $storage/$repository_name

      unset repository_name repository_url repository_protocol

    done
  done

}

function simplaret_find_package {

  # grep packages in a repository's file list
  # usage: simplaret_find_package <package-name|-all> <repository-folder>

  if [ "$1" == "-all" ]; then
    grep -e ".tgz$" $2/`simplaret_filelist` | awk '{ print $8 }'
  else
    grep $1 $2/`simplaret_filelist` | awk '{ print $8 }' | grep -e ".tgz$"
  fi

}

function simplaret_show_package {

  # print a package result
  # usage: simplaret_show_package <package-file-name> [--basename-only|--filename-only|--formatted]

  if [ "$2" == "--basename-only" ]; then
    echo `basename $1`
  elif [ "$2" == "--filename-only" ]; then
    echo $1
  elif [ "$2" == "--formatted" ]; then
    echo $1,$repos_type,$repository
  else 
    if echo $1 | grep -q "/patches/"; then
      patch="(patch)"
    fi
    if [ "$repos_type" == "noarch" ]; then
      echo $name repository $repository_name: `basename $1` $patch
    else
      echo $name repository $repository_name, arch: $ARCH, version: $VERSION: `basename $1` $patch
    fi
  fi
  unset patch

}

function simplaret_filelist {

  if [ "$repos_type" == "patches" ]; then
    echo FILE_LIST
  else
    echo FILELIST.TXT
  fi

}

function simplaret_metafiles {

  echo `simplaret_filelist` CHECKSUMS.md5

}

function simplaret_search {

  # search packages
  # usage: simplaret_search [package-name] [-display_mode]
  # display_mode can be any accepted by simplaret_show_package

  local priority priority_match message pattern mode

  if [ ! -z "$1" ] && ! echo $1 | grep -q -e "^-"; then
    pattern="$1"
    mode="$2"
  else
    pattern="-all"
    mode="$1"
  fi

  for repos_type in patches root repos noarch; do

    name="`echo $repos_type | tr '[:lower:]' '[:upper:]'`"
    simplaret_set_storage_folder

    for repository in `simplaret_repository $repos_type`; do
      
      simplaret_repository_name

      if [ ! -f "$storage/$repository_name/`simplaret_filelist`" ]; then
        if [ "$WARNING" != "0" ] || [ ! -z "$SILENT" ]; then
          if [ "$repos_type" == "noarch" ]; then
            message=""
          else
            message="on arch $ARCH version $VERSION"
          fi
          echo warning: no file list for $repository_name repository $repository_name $message
          echo please do a simplaret --update
        fi
      else

        if [ "$repos_type" == "root" ]; then
          # root repositories has ROOT_PRIORITY
          for priority in $ROOT_PRIORITY; do
            for file in `simplaret_find_package $pattern $storage/$repository_name | grep "/$priority/"`; do
              simplaret_show_package $file $mode
            done
            priority_match="$priority_match|/$priority/"
          done
          # now we should return all matches that are not part of ROOT_PRIORITY
          priority_match="`echo $priority_match | sed -e 's/^|//'`"
          for file in `simplaret_find_package $pattern $storage/$repository_name | egrep -v $priority_match`; do
            simplaret_show_package $file $mode
          done
          priority_match=""
        elif [ "$repos_type" == "repos" ]; then
          # repos repositories has REPOS_PRIORITY
          for priority in $REPOS_PRIORITY; do
            for file in `simplaret_find_package $pattern $storage/$repository_name | grep "/$priority/"`; do
              simplaret_show_package $file $mode
            done
            priority_match="$priority_match|/$priority/"
          done
          # now we should return all matches that are not part of REPOS_PRIORITY
          priority_match="`echo $priority_match | sed -e 's/^|//'`"
          for file in `simplaret_find_package $pattern $storage/$repository_name | egrep -v $priority_match`; do
            simplaret_show_package $file $mode
          done 
          priority_match=""
        else
          for file in `simplaret_find_package $pattern $storage/$repository_name`; do
            simplaret_show_package $file $mode
          done
        fi

      fi

    done
  done

}

function simplaret_purge {

  # purge simplaret package cache
  # usage: simplaret_purge [-w N]

  local mtime mtime_message which and_patches

  if [ "$1" == "-w" ] && [ ! -z "$2" ]; then
    mtime="-mtime +`echo "$2*7" | bc -l`"
    mtime_message="older than $2 weeks"
  elif [ "$SIMPLARET_PURGE_WEEKS" != "0" ]; then
    mtime="-mtime +`echo "$SIMPLARET_PURGE_WEEKS*7" | bc -l`"
    mtime_message="older than $SIMPLARET_PURGE_WEEKS weeks"
  else
    mtime=""
    mtime_mesage=""
  fi

  which="root repos noarch"
  and_patches=""

  if [ "$SIMPLARET_PURGE_PATCHES" == "1" ]; then
    which="patches $which"
    and_patches="including patches"
  fi

  if [ -z "$SILENT" ]; then
    if [ -z "$mtime_message" ]; then
      echo "$BASENAME: purging all packages for:"
    else
      echo "$BASENAME: purging all packages $mtime_message for:"
    fi
    echo -e "\t- Arch $ARCH and version $VERSION $and_patches"
    echo -e "\t- Noarch folder"
  fi

  for repos_type in $which; do

    simplaret_set_storage_folder

    for file in `find $storage/ $mtime 2> /dev/null`; do
      for extension in tgz asc meta txt slack-required; do
        if echo $file | grep -qe ".$extension$"; then
          rm $file
        fi
      done
    done

  done

  if [ -z "$SILENT" ]; then
    echo $BASENAME: done purging simplaret cache
    echo $BASENAME: please run $BASENAME --update to retrieve new package listings on this arch and version
  fi

}

function simplaret_search_and_delete {

  # search and delete packages
  # usage: simplaret_search_and_delete <package> <folder> [--silent]

  local file candidate place basename name version build
  local name_version name_build

  name="`package_name $1`"

  if [ "$name" != "$1" ]; then
    # searching by full package filename
    name_version="`package_version $1`"
    name_build="`package_build $1`"

    # search wheter the package filename is in the repositories
    if [ "`simplaret_search $1 | grep $1 | wc -l`" == "0" ]; then 
      echo "Error: package not found: $1"
      return 1
    fi

    for file in `find $2/ -name $name*tgz 2> /dev/null`; do
      candidate="`basename $file`"
      version="`package_version $candidate`"
      build="`package_build $candidate`"
      if [ "`package_name $candidate`" == "$name" ]; then

        if [ "$name_version" == "$version" ] && \
           [ "$name_build" == "$build" ]; then
           LAST_DOWNLOADED_PACKAGE="$file"
           if [ "$3" != "--silent" ]; then
             echo Package $candidate already downloaded
             # echo Package $candidate stored at `dirname $file`
           else
             true
             # echo $file
           fi
           return 1
         else
           place="`dirname $file`"
           basename="`basename $file tgz`"
           rm -f $file
           rm -f $place/$candidate.slack-required
           rm -f $file.asc $place/$basename.meta $place/$basename.txt
           break
         fi
           
       fi
    done

  else

    for file in `find $2/ -name $name*tgz 2> /dev/null`; do
      candidate="`basename $file`"
      version="`package_version $candidate`"
      build="`package_build $candidate`"
      if [ "`package_name $candidate`" == "$name" ]; then
        # check if has the same version and build number, otherwise erase the old one
        for result in `simplaret_search $(package_name $candidate) --basename-only`; do
          if [ "`package_name $candidate`" == "`package_name $result`" ]; then

            if [ "$version" == "`package_version $result`" ] && \
               [ "$build" == "`package_build $result`" ]; then
               LAST_DOWNLOADED_PACKAGE="$file"
               if [ "$3" != "--silent" ]; then
                 echo Package $candidate already downloaded
                 # echo Package $candidate stored at `dirname $file`
               else
                 true
                 # echo $file
               fi
               return 1
             else
               place="`dirname $file`"
               basename="`basename $file tgz`"
               rm -f $file
               rm -f $place/$candidate.slack-required
               rm -f $file.asc $place/$basename.meta $place/$basename.txt
               break
             fi

          fi
        done
      fi
    done

  fi

}

function simplaret_get {

  # get a package
  # usage: simplaret_get <package-name|package-file-name> [--silent]

  local silent generate_patches search search_results
  local name version build

  # prevent user to stay in $storage
  cd 

  name="`package_name $1`"

  if [ "$name" != "$1" ]; then
    # simplaret_get was called with the package file
    # name and not with just the package name
    version="`package_version $1`"
    build="`package_build $1`"
  else
    version=""
    build=""
  fi

  # first search for an already downloaded package
  for repos_type in patches root repos noarch; do

    simplaret_set_storage_folder
    simplaret_search_and_delete $1 $storage $2

    if [ "$?" == "1" ]; then
      return 0
    fi

  done

  # then search for the package in the repositories
  search="`simplaret_search $1 --formatted`"
  search_results="`echo "$search" | wc -l`"

  for result in $search; do

    # remaining search results
    let search_results--

    file="`echo $result | cut -d , -f 1`"
    repos_type="`echo $result | cut -d , -f 2`"
    repository="`echo $result | cut -d , -f 3`"

    simplaret_set_storage_folder
    simplaret_repository_name

    candidate="`basename $file`"
    if [ "`package_name $candidate`" == "$name" ]; then

      if [ ! -z "$build" ] && [ ! -z "$version" ]; then
        # simplaret_get was called with the package file
        # name and not with just the package name
        if [ "$version" != "`package_version $candidate`" ] && \
           [ "$build" != "`package_build $candidate`" ]; then
           # the package version and/or build doesnt matched
           # the desired one
           continue
         fi
      fi

      simplaret_repository_url

      # if repos_type == root, the package is a patch and
      # STORE_ROOT_PATCHES_ON_PATCHES_DIR config parameter is enabled, then
      # save it on $PATCHES_DIR/root-$repository_name, so all patches
      # are placed in the same tree
      if [ "$repos_type" == "root" ] && \
         [ "$STORE_ROOT_PATCHES_ON_PATCHES_DIR" == "1" ] && echo $file | grep -q "patches"; then
        folder="$PATCHES_DIR/$ARCH/$VERSION/root-$repository_name"
        generate_patches="1"
      else
        folder="$storage/$repository_name"
      fi

      # download the package
      simplaret_download $repository_url $file $folder

      if [ -f "$folder/$candidate.asc" ]; then
        rm $folder/$candidate.asc
      fi

      if [ -f "$folder/$name.slack-required" ]; then
        rm $folder/$name.slack-required
      fi

      # download the signature, if exist
      if simplaret_check_url $repository_url/$file.asc; then
        simplaret_download $repository_url $file.asc $folder
      fi

      # download slack-required, if exist
      if simplaret_check_url $repository_url/`dirname $file`/$name.slack-required; then
        simplaret_download $repository_url `dirname $file`/$name.slack-required $folder
      fi

      if [ ! -f "$folder/$candidate" ]; then
        LAST_DOWNLOADED_PACKAGE="0"
        if [ "$2" != "--silent" ]; then
          echo Error downloading $candidate from $repos_type repository $repository_url, please check your settings
        fi
        # check if there's also more repositories to try
        if [ "$SIMPLARET_DOWNLOAD_FROM_NEXT_REPO" != "1" ]; then
          return 1
        else
          if [ "$2" != "--silent" ]; then
            echo Trying to fetch $candidate from the next repository...
          fi
          if (($search_results <= 0)); then
            return 1
          fi
        fi
      else
        LAST_DOWNLOADED_PACKAGE="$folder/$candidate"
        if [ "$2" != "--silent" ]; then
          silent=""
          echo Package $candidate stored at $folder
        else
          # echo $folder/$candidate
          silent="--silent"
        fi
        if [ -f "$folder/$candidate.asc" ] || [ "$SIGNATURE_CHECKING" == "1" ]; then
          gpg --verify $folder/$candidate.asc $folder/$candidate
        fi
        # generate the patches FILE_LIST and PACKAGES.TXT if needed
        if [ "$generate_patches" == "1" ]; then
          gen_patches_filelst $folder
          gen_packages_txt $folder
          gen_md5_checksums $folder
        fi
        simplaret_checksum $storage/$repository_name/CHECKSUMS.md5 $folder/$candidate $silent
        return $?
      fi

    fi

  done

}

function simplaret_search_and_process_patch {

  local package_version package_build installed_version pack
  local installed_build repos_type get is_patch package_match

  # get just the file and package name
  sugested_filename="`echo $sugested | cut -d , -f 1`"
  sugested_pack="`package_name $sugested_filename`"

  # search if its installed in the jail
  if grep -q -e "^$sugested_pack$" $PACKAGES_TMP; then
  
    # get the repository type
    repos_type="`echo $sugested | cut -d , -f 2`"

    if echo $sugested | grep -q "patches"; then
      is_patch="yes"
    else
      is_patch="no"
    fi

    # now split the file name into pieces
    package_version="`package_version $sugested_filename`"
    package_build="`package_build $sugested_filename`"

    # check if the patch was already downloaded
    if echo "$DOWNLOADED_PATCHES" | grep -q " $ARCH:$VERSION:$sugested_pack "; then
      #if [ "$IS_UPGRADE" != "1" ]; then
        #echo Package $sugested_pack already downloaded
        #echo "Jail $root needs package $sugested_pack (already downloaded, skipping)"
        return
      #fi
    fi

    pack="`echo $sugested_pack | sed -e 's/\+/\\\+/'`"
    installed=`eval "ls $root/var/log/packages/ | egrep -E '^$pack-[^-]+-[^-]+-[^-]+$'"`
    installed_version="`package_version $installed.tgz`"
    installed_build="`package_build $installed.tgz`"

    get="no"

    # if needed, download the patch
    if [ "$repos_type" == "patches" ]; then

      if  [ "$package_version" != "$installed_version" ] || [ "$package_build" != "$installed_build" ]; then
        get="yes"
        package_match="no"
      elif [ "$DOWNLOAD_EVEN_APPLIED_PATCHES" == "1" ]; then
        get="yes"
      fi

    elif [ "$repos_type" == "root" ] && [ "$is_patch" == "yes" ]; then

      if  [ "$package_version" != "$installed_version" ] || [ "$package_build" != "$installed_build" ]; then
        get="yes"
        package_match="no"
      elif [ "$DOWNLOAD_EVEN_APPLIED_PATCHES" == "1" ]; then
        get="yes"
      fi

    else
      # here, we're dealing with repositories other than ROOT and REPOS,
      # so we need to check if either version or build number are different,
      # otherwise all installed packages would be downloaded
      if [ "$package_version" != "$installed_version" ] || [ "$package_build" != "$installed_build" ]; then
        get="yes"
        package_match="no"
      fi
    fi

    # finally, get the package
    if [ "$get" == "yes" ]; then
      if [ "$IS_UPGRADE" == "1" ]; then
        if [ "$package_match" == "no" ]; then
          simplaret_install $sugested_pack
        else
          simplaret_get $sugested_pack
        fi
      else
        simplaret_get $sugested_pack
      fi
      if [ "$?" == "0" ]; then
        DOWNLOADED_PATCHES="$DOWNLOADED_PATCHES $ARCH:$VERSION:$sugested_pack " # the ending space is important
      fi
    fi

  fi

  unset get

}

function simplaret_get_jail_patches {

  # get patches from a jail
  # usage: simplaret_get_jail_patches <jail-folder>

  local oldarch oldversion

  if [ ! -z "$1" ]; then
    root="$1"
  else
    root="/"
  fi

  # save current arch and version
  oldarch="$ARCH"
  oldversion="$VERSION"

  ARCH="`default_arch $root`"
  VERSION="`default_version $root`"

  # in case there's something wrong with the jail, abort
  if [ -z "$VERSION" ] || [ -z "$ARCH" ]; then
    return
  fi

  # we need to do that for each arch/version pairs, but just once for each pair
  if ! echo "$DISTRO_UPDATED" | grep -q " $ARCH:$VERSION "; then
    simplaret_update
    DISTRO_UPDATED="$DISTRO_UPDATED $ARCH:$VERSION " # the ending space is important
    echo ""
  fi

  # installed packages at $root
  PACKAGES_TMP=/tmp/simplaret_packages.$RANDOM
  rm -f $PACKAGES_TMP ; touch $PACKAGES_TMP ; chmod 600 $PACKAGES_TMP
  ls -1 $root/var/log/packages/ | sed -e 's/-[^-]*-[^-]*-[^-]*$//' > $PACKAGES_TMP

  echo Fetching patches for arch $ARCH and version $VERSION for jail $root

  # list all available patches from PATCHES and ROOT repositories
  for sugested in `simplaret_search --formatted | grep patches | grep -v ",repos," | grep -v ",noarch,"`; do
    simplaret_search_and_process_patch
  done

  # grab patches from every other places
  if [ "$CONSIDER_ALL_PACKAGES_AS_PATCHES" == "1" ]; then

    for sugested in `simplaret_search --formatted | grep patches | grep ",repos," | grep ",noarch,"`; do
      simplaret_search_and_process_patch
    done

    for sugested in `simplaret_search --formatted | grep -v patches`; do
      simplaret_search_and_process_patch
    done

  fi

  rm $PACKAGES_TMP

  # restore arch and version
  ARCH="$oldarch"
  VERSION="$oldversion"

}

function simplaret_get_patches {

  local jailpath

  if [ "$1" == "--upgrade" ]; then
    IS_UPGRADE="1"
  fi

  if [ ! -z "$ROOT" ]; then
    simplaret_get_jail_patches $ROOT
    return $?
  fi

  # first get patches from the root system
  simplaret_get_jail_patches

  # then get the needed patches for each installed jail
  if [ -s "$JAIL_LIST" ]; then
    for jailpath in `cat $JAIL_LIST`; do
      if [ -d "$jailpath/var/log/packages" ]; then
        ROOT="$jailpath"
        simplaret_get_jail_patches $jailpath
      fi
    done
  fi

  ROOT=""

}

function simplaret_checksum {

  # simplaret_checksum <md5file> <file-name> [--silent]

  if [ ! -f "$1" ] || [ ! -f "$2" ]; then
    if [ "$3" != "--silent" ]; then
      echo Checksum error: file not found
    fi
    return 1
  fi

  pack="`basename $2`"
  checksum="`grep -e "$pack\$" $1 | awk '{ print $1 }'`"

  if [ -z "$checksum" ]; then
    echo file $2 not in checksum $1
    return 1
  elif [ "$checksum" != "`md5sum $2 | awk '{ print $1 }'`" ]; then
    if [ "$3" != "--silent" ]; then
      echo Checksum mismatch for file `basename $file`
    fi
    return 1
  else
    if [ "$3" != "--silent" ]; then
      echo Checksum ok for file `basename $file`
    fi
    return 0
  fi

}

function simplaret_install {

  # download and install a package
  # usage: simplaret_install <package-name1|package-file-name1> ... [--skip-checks]

  local package root jail_arch jail_version slack_required dep dependency tmp
  local name version build

  for package in $*; do

    if [ "$package" == "--skip-checks" ]; then
      continue
    fi

    name="`package_name $package`"
  
    root="/$ROOT"
    mkdir -p $root/var/log/setup/tmp
  
    if [ "`echo $package | sed -e 's/\(..\).*/\1/g'`" == "--" ]; then
      echo $BASENAME: install: syntax error: expected package name
      return 1
    fi
  
    # now we check if ARCH and VERSION from the
    # repository are the same of the jail
    if ! echo $* | grep -q -- "--skip-checks"; then
      jail_arch="`default_arch $root`"
      jail_version="`default_version $root`"
      if [ "$ARCH" != "$jail_arch" ]; then
        echo "$BASENAME: requested repository arch ($ARCH) doesn't match jail arch ($jail_arch)"
        echo "$BASENAME: please use \"$BASENAME --get $package --skip-checks\" to ignore this warning and install anyway"
        return
      elif [ "$VERSION" != "$jail_version" ]; then
        echo "$BASENAME: requested repository version ($VERSION) doesn't match jail version ($jail_version)"
        echo "$BASENAME: please use \"$BASENAME --get $package --skip-checks\" to ignore this warning and install anyway"
        return 1
      fi
    fi
  
    # package="`simplaret_get $package --silent`"
    simplaret_get $package --silent
    package="$LAST_DOWNLOADED_PACKAGE"
  
    if [ "$package" != "0" ] && [ ! -z "$package" ]; then
      slack_required="`dirname $package`/$name.slack-required"
      if [ -f "$package" ]; then
  
        if [ -f "$slack_required" ] && [ "$DEPENDENCY_CHECKING" == "1" ]; then
          # this routine checks for dependencies in package's slack-required
          # procedure adapted from createpkg script
          ( grep -v '^#' $slack_required | while read dep; do
             if [ ! -z "$dep" ]; then
              dependency="`echo $dep | awk '{ print $package }'`"
              simplaret_solve_dep $name $dependency $root
             fi
             true
           done )
        fi
  
        ROOT=$root upgradepkg --install-new $package
        LAST_DOWNLOADED_PACKAGE="0"
  
      else
        echo "Error: could not install package $package: file not found"
        LAST_DOWNLOADED_PACKAGE="0"
        return 1
      fi
    else
      echo "Error: could not install package $package"
      LAST_DOWNLOADED_PACKAGE="0"
      return 1
    fi

  done

}

function simplaret_set_arch {

  # set correct value for ARCH

  local repos_type new_arch

  # any arch defined in ARCH_i386 that hasn't an entry
  # on $REPOS_CONF will be mapped to i386

  ARCH_i386=" nocona prescott pentium4m pentium4 pentium-m pentium3m pentium3 "
  ARCH_i386="$ARCH_i386 pentium2 i686 pentium-pro i586 pentium-mmx pentium i486 "
  ARCH_i386="$ARCH_i386 athlon-mp athlon-xp athlon4 athlon-tbird athlon k6 k6-2 "
  ARCH_i386="$ARCH_i386 k6-3 winchip-c6 winchip2 c3 c3-2 i386 "

  # any arch defined in ARCH_x86_64 that hasn't an entry
  # on $REPOS_CONF will be mapped to x86_64

  ARCH_x86_64=" k8 opteron athlon64 athlon-fx x86_64 "

  for repos_type in patches root repos noarch; do
    if [ -z "`simplaret_repository $repos_type`" ]; then
      # there's no repository definition for that arch
      if echo "$ARCH_i386" | grep -q " $ARCH "; then
        new_arch="i386"
      elif echo "$ARCH_x86_64" | grep -q " $ARCH "; then
        new_arch="x86_64"
      else
        echo "$BASENAME: error: no repository definition for arch $ARCH"
        echo "$BASENAME: please check your $CONF and $REPOS_CONF config files"
        exit 1
      fi
    else
      return
    fi
  done

  echo "$BASENAME: changing arch from $ARCH to $new_arch"

  ARCH="$new_arch"

}

function simplaret_check_url {

  # check if a given url exist, use just with small files
  # usage: simplaret_check_url <url>

  if [ -z "$1" ]; then
    return 1
  fi

  if echo $1 | grep -q -e "^file:///"; then
    url="`echo $1 | sed -e 's/file:\/\///'`"
    if [ -e "$url" ]; then
      return 0
    else
      return 1
    fi
  fi

  if [ ! -z "$CONNECT_TIMEOUT" ] || [ "$CONNECT_TIMEOUT" != "0" ]; then
    curl_timeout="--connect-timeout $CONNECT_TIMEOUT"
  fi

  if [ "`curl $curl_timeout -I $1 2> /dev/null | head -n 1 | awk '{ print $2 }'`" == "200" ]; then
    # server gave a 200 response, so the url exist
    return 0
  else
    # the url is missing
    return 1
  fi

}

function simplaret_solve_dep {

  # solve dependency for a package
  # this function was adapted from createpkg script
  # usage: simplaret_solve_dep <package-name> <package-depencency-name> [root-folder]

  local installed check exit_code

  local package="$1"
  local pack="$2"
  local root="/$3"

  pack="`echo $pack| sed -e 's/\+/\\\+/'`"
  installed=`eval "ls $root/var/log/packages/ | egrep -E '^$pack-[^-]+-[^-]+-[^-]+$'"`
  check=$?

  if [ -z "$installed" ]; then
    if [ $check -ne 0 ]; then
      echo "$BASENAME: processing $1 dependency $pack" 
      # simplaret_install $pack
      SIMPLARET_CHILD=$SIMPLARET_CHILD ROOT=$root ARCH=$ARCH VERSION=$VERSION \
      simplaret --install $pack
    fi
  fi

}

function simplaret_remove {

  # remove packages
  # usage: simplaret_remove <package1> [<package2> ... <packageN>]

  for package in $*; do
    ROOT=/$ROOT removepkg $package
  done

}

function simplaret_req_arg {

  # requires arg

  if [ -z "$1" ]; then
    simplaret_usage;
  fi

}

if [ -z "$1" ]; then
  simplaret_usage
  exit 1
else
  eval_config $BASENAME
fi

# This is used to show how many children process we have
if [ -z "$SIMPLARET_CHILD" ]; then
  SIMPLARET_CHILD="1"
else
  let SIMPLARET_CHILD++
fi

BASENAME="`basename $0`[$SIMPLARET_CHILD]"

case $1 in
  "--update" | "update" | "--sync" | "sync" ) simplaret_update ;;
  "--upgrade" | "upgrade") simplaret_get_patches --upgrade ;;
  "--get-patches" | "get-patches") simplaret_get_patches ;;
  "--search" | "search") shift ; simplaret_req_arg $1 ; simplaret_search $* ;;
  "--get" | "get") shift ; simplaret_req_arg $1 ; simplaret_get $* ;;
  "--purge" | "purge") shift ; simplaret_req_arg $1 simplaret_purge $* ;;
  "--install" | "install") shift ; simplaret_req_arg $1 ; simplaret_install $* ;;
  "--remove" | "remove") shift ; simplaret_req_arg $1 ; simplaret_remove $* ;;
  "--help" | "help") simplaret_usage ;;
  *)
    if echo $1 | grep -q -v '^--'; then
      simplaret_install $*
    else
      simplaret_usage
    fi
    ;;
esac