diff options
Diffstat (limited to 'trunk/templates/slackware/slackware.template')
| -rw-r--r-- | trunk/templates/slackware/slackware.template | 566 |
1 files changed, 0 insertions, 566 deletions
diff --git a/trunk/templates/slackware/slackware.template b/trunk/templates/slackware/slackware.template deleted file mode 100644 index c3590c1..0000000 --- a/trunk/templates/slackware/slackware.template +++ /dev/null @@ -1,566 +0,0 @@ -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: A1 (Base Linux series) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -aaa_base: ADD -aaa_elflibs: ADD -acpid: REC -apmd: REC -bash: ADD -bin: ADD -bzip2: ADD -coreutils: ADD -cpio: ADD -cups: REC -cxxlibs: ADD -dcron: ADD -devs: ADD -e2fsprogs: ADD -elvis: ADD -etc: ADD -findutils: ADD -floppy: ADD -gawk: ADD -genpower: OPT -gettext: REC -getty-ps: OPT -glibc-solibs: ADD -glibc-zoneinfo: ADD -gpm: REC -grep: ADD -gzip: ADD -hdparm: ADD -hotplug: ADD -infozip: ADD -isapnptools: OPT -jfsutils: OPT -kbd: REC -kernel-ide: REC -kernel-modules: ADD -less: ADD -lilo: ADD -loadlin: REC -logrotate: ADD -minicom: REC -mkinitrd: REC -module-init-tools: ADD -openssl-solibs: ADD -pciutils: OPT -pcmcia-cs: REC -pkgtools: ADD -procps: ADD -reiserfsprogs: ADD -sed: ADD -shadow: ADD -slocate: ADD -smartmontools: ADD -sysklogd: ADD -syslinux: ADD -sysvinit: ADD -tar: ADD -tcsh: REC -udev: ADD -umsdos-progs: ADD -usbutils: ADD -utempter: REC -util-linux: ADD -xfsprogs: OPT -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: AP1 (Applications series) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -a2ps: REC -acct: OPT -alsa-utils: REC -amp: OPT -ash: OPT -at: OPT -aumix: OPT -bc: OPT -bpe: OPT -cdparanoia: OPT -cdrdao: OPT -cdrtools: OPT -diffutils: REC -dvd+rw-tools: OPT -enscript: OPT -espgs: REC -flac: OPT -gimp-print: OPT -groff: ADD -gnu-gs-fonts: REC -hpijs: REC -ispell: OPT -jed: OPT -joe: OPT -jove: OPT -ksh93: OPT -lsof: OPT -lvm: OPT -madplay: OPT -man: ADD -man-pages: REC -mc: OPT -mdadm: OPT -most: OPT -mpg321: OPT -mt-st: OPT -mysql: OPT -normalize: OPT -quota: OPT -raidtools: OPT -rexima: REC -rpm: OPT -rzip: OPT -sc: OPT -screen: OPT -seejpeg: REC -sgml-tools: REC -sox: REC -sudo: OPT -texinfo: REC -vim: OPT -vorbis-tools: OPT -workbone: OPT -zsh: OPT - -autoconf: OPT -automake: OPT -bin86: ADD -binutils: ADD -bison: ADD -byacc: OPT -ccache: OPT -clisp: OPT -cscope: OPT -cvs: REC -distcc: OPT -doxygen: OPT -flex: ADD -gcc: ADD -gcc-g++: REC -gcc-g77: OPT -gcc-gnat: OPT -gcc-java: OPT -gcc-objc: OPT -gdb: REC -gettext-tools: REC -guile: OPT -indent: OPT -kernel-headers: ADD -libtool: OPT -m4: REC -make: ADD -nasm: OPT -oprofile: OPT -p2c: OPT -perl: REC -pkgconfig: REC -pmake: REC -python: OPT -python-demo: OPT -python-tools: OPT -rcs: OPT -strace: REC -subversion: OPT -# Tagfile for emacs series -emacs: ADD -emacs-misc: REC -emacs-lisp: OPT -emacs-leim: OPT -emacs-nox: OPT -emacs-info: REC -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: F1 (Frequently Asked Questions) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -linux-faqs: ADD -linux-howtos: ADD -kernel-source: REC -aalib: REC -alsa-driver: ADD -alsa-lib: ADD -alsa-oss: OPT -arts: ADD -aspell: REC -aspell-en: REC -atk: REC -audiofile: REC -db3: REC -db31: REC -db4: REC -esound: REC -expat: REC -fribidi: REC -gdbm: REC -gdk-pixbuf: REC -glib: REC -glib2: REC -glibc: REC -glibc-i18n: OPT -glibc-profile: OPT -glut: REC -gmp: REC -gnet: REC -gtk+: REC -gtk+2: REC -imlib: REC -jre: OPT -lcms: REC -lesstif: REC -libao: REC -libart_lgpl: REC -libcaca: OPT -libexif: REC -libglade: REC -libgsf: REC -libgtkhtml: REC -libid3tag: REC -libidl: REC -libidn: REC -libieee1284: REC -libjpeg: REC -libmad: REC -libmikmod: REC -libmng: REC -libogg: REC -libpng: REC -librsvg: REC -libtermcap: REC -libtiff: REC -libungif: REC -libusb: REC -libvorbis: REC -libwmf: REC -libwmf-docs: OPT -libwpd: REC -libxml2: REC -libxslt: REC -mhash: REC -mpeg_lib: OPT -ncurses: REC -netpbm: REC -pango: REC -pcre: REC -pilot-link: REC -popt: REC -readline: REC -sdl: REC -shared-mime-info: REC -slang: REC -startup-notification: ADD -svgalib: REC -t1lib: REC -taglib: REC -wv2: REC -xaw3d: REC -zlib: REC -# This is a Slackware Installation Tagfile. -# -# This one comes from the N (Network/UUCP/Mail/News) series. -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# -apache: OPT -autofs: OPT -bind: REC -bitchx: OPT -bootp: OPT -curl: OPT -cyrus-sasl: REC -dhcp: OPT -dhcpcd: REC -dnsmasq: OPT -elm: OPT -epic4: OPT -fetchmail: OPT -getmail: REC -gnupg: OPT -htdig: OPT -imapd: OPT -inetd: REC -iproute2: OPT -iptables: ADD -iptraf: OPT -irssi: OPT -lftp: OPT -links: OPT -lynx: OPT -metamail: REC -mod_ssl: OPT -mutt: OPT -nail: REC -nc: OPT -ncftp: OPT -netatalk: OPT -netpipes: OPT -netwatch: OPT -newspost: OPT -nfs-utils: OPT -nmap: OPT -nn: OPT -ntp: OPT -openssh: REC -openssl: REC -php: OPT -pidentd: REC -pine: OPT -popa3d: REC -portmap: REC -ppp: OPT -procmail: REC -proftpd: OPT -rdist: OPT -rp-pppoe: OPT -rsync: OPT -samba: OPT -sendmail-cf: OPT -sendmail: REC -slrn: OPT -stunnel: OPT -tcpdump: REC -tcpip: REC -tin: OPT -traceroute: OPT -trn: OPT -uucp: OPT -vsftpd: REC -wget: OPT -whois: OPT -wireless-tools: OPT -yptools: OPT -ytalk: OPT -tetex: ADD -tetex-doc: REC -xfig: OPT -transfig: OPT -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: TCL1 (Tcl/Tk series) -# and a backup copy called "tagfile.org" can be found on the same disk. You -# should never edit the "tagfile.org" copy, only the one called "tagfile". Use -# the "tagfile.org" only if you want to restore original installation defaults -# by copying it over the top of "tagfile". -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -# -# If you mess this file up beyond recognition, just restore from "tagfile.org" -# -# -expect: OPT -hfsutils: OPT -tcl: ADD -tk: REC -tclx: REC -tix: OPT -x11: ADD -x11-devel: ADD -x11-docs: REC -x11-docs-html: OPT -x11-fonts-100dpi: OPT -x11-fonts-cyrillic: OPT -x11-fonts-misc: ADD -x11-fonts-scale: ADD -x11-xdmx: OPT -x11-xnest: OPT -x11-xvfb: OPT -abiword: OPT -blackbox: OPT -fluxbox: OPT -fvwm: REC -gaim: OPT -gftp: OPT -gimp: REC -gimp-help-2: REC -gkrellm: OPT -gnuchess: REC -gnuplot: OPT -gucharmap: OPT -gv: REC -gxine: OPT -imagemagick: REC -mozilla: REC -mozilla-firefox: REC -mozilla-thunderbird: REC -pan: REC -rxvt: REC -sane: OPT -seyon: OPT -windowmaker: REC -x3270: OPT -xchat: OPT -xfce: OPT -xfm: OPT -xfractint: OPT -xgames: REC -xine-lib: REC -xine-ui: REC -xpaint: OPT -xpdf: OPT -xmms: OPT -xsane: OPT -xlockmore: REC -xscreensaver: REC -xv: REC -xvim: REC -xxgdb: REC -# This is a Slackware Installation Tagfile. -# -# This one comes from disk: Y1 (Yaaaaaahhoooo? Games and Amusements). -# -# It is used to automate software installation. -# There are two labels that you can use: ADD and SKP. -# -# If the PROMPT option is used during installation, this file will be checked -# to determine the installation default. First, all the lines beginning with -# <package_name>: -# will be extracted. Then, the last line in the extracted segment will be -# checked for the flags ADD, REC, OPT and SKP. -# -# If ADD is found, then a priority of [required] will be displayed, and the -# package will be automatically installed. -# -# If SKP is found, then a priority of [skip] will be displayed, and -# the package will be automatically skipped. -# -# All other packages will be prompted for. There are two optional flags you -# can use to change the package priority level shown when the user is -# prompted: REC and OPT. If REC is found, the priority shown will be -# [recommended], while if OPT is found, the user sees priority [optional]. -# -# If no flags are found for a given package, the user is shown priority -# [unknown], and is prompted for whether the package should be installed. -bsd-games: OPT - |