templates: removed slackware and added slackware-12.1

git-svn-id: svn+slack://slack.fluxo.info/var/svn/simplepkg@532 04377dda-e619-0410-9926-eae83683ac58

1 files changed, 0 insertions, 566 deletions

diff --git a/trunk/templates/slackware/slackware.template b/trunk/templates/slackware/slackware.template
deleted file mode 100644
index c3590c1..0000000
--- a/trunk/templates/slackware/slackware.template
+++ /dev/null
@@ -1,566 +0,0 @@
-# This is a Slackware Installation Tagfile.
-# 
-# This one comes from disk: A1 (Base Linux series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-aaa_base: ADD
-aaa_elflibs: ADD
-acpid: REC
-apmd: REC
-bash: ADD
-bin: ADD
-bzip2: ADD
-coreutils: ADD
-cpio: ADD
-cups: REC
-cxxlibs: ADD
-dcron: ADD
-devs: ADD
-e2fsprogs: ADD
-elvis: ADD
-etc: ADD
-findutils: ADD
-floppy: ADD
-gawk: ADD
-genpower: OPT
-gettext: REC
-getty-ps: OPT
-glibc-solibs: ADD
-glibc-zoneinfo: ADD
-gpm: REC
-grep: ADD
-gzip: ADD
-hdparm: ADD
-hotplug: ADD
-infozip: ADD
-isapnptools: OPT
-jfsutils: OPT
-kbd: REC
-kernel-ide: REC
-kernel-modules: ADD
-less: ADD
-lilo: ADD
-loadlin: REC
-logrotate: ADD
-minicom: REC
-mkinitrd: REC
-module-init-tools: ADD
-openssl-solibs: ADD
-pciutils: OPT
-pcmcia-cs: REC
-pkgtools: ADD
-procps: ADD
-reiserfsprogs: ADD
-sed: ADD
-shadow: ADD
-slocate: ADD
-smartmontools: ADD
-sysklogd: ADD
-syslinux: ADD
-sysvinit: ADD
-tar: ADD
-tcsh: REC
-udev: ADD
-umsdos-progs: ADD
-usbutils: ADD
-utempter: REC
-util-linux: ADD
-xfsprogs: OPT
-# This is a Slackware Installation Tagfile.
-#           
-# This one comes from disk: AP1 (Applications series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-a2ps: REC
-acct: OPT
-alsa-utils: REC
-amp: OPT
-ash: OPT
-at: OPT
-aumix: OPT
-bc: OPT
-bpe: OPT
-cdparanoia: OPT
-cdrdao: OPT
-cdrtools: OPT
-diffutils: REC
-dvd+rw-tools: OPT
-enscript: OPT
-espgs: REC
-flac: OPT
-gimp-print: OPT
-groff: ADD
-gnu-gs-fonts: REC
-hpijs: REC
-ispell: OPT
-jed: OPT
-joe: OPT
-jove: OPT
-ksh93: OPT
-lsof: OPT
-lvm: OPT
-madplay: OPT
-man: ADD
-man-pages: REC
-mc: OPT
-mdadm: OPT
-most: OPT
-mpg321: OPT
-mt-st: OPT
-mysql: OPT
-normalize: OPT
-quota: OPT
-raidtools: OPT
-rexima: REC
-rpm: OPT
-rzip: OPT
-sc: OPT
-screen: OPT
-seejpeg: REC
-sgml-tools: REC
-sox: REC
-sudo: OPT
-texinfo: REC
-vim: OPT
-vorbis-tools: OPT
-workbone: OPT
-zsh: OPT
-
-autoconf: OPT
-automake: OPT
-bin86: ADD
-binutils: ADD
-bison: ADD
-byacc: OPT
-ccache: OPT
-clisp: OPT
-cscope: OPT
-cvs: REC
-distcc: OPT
-doxygen: OPT
-flex: ADD
-gcc: ADD
-gcc-g++: REC
-gcc-g77: OPT
-gcc-gnat: OPT
-gcc-java: OPT
-gcc-objc: OPT
-gdb: REC
-gettext-tools: REC
-guile: OPT
-indent: OPT
-kernel-headers: ADD
-libtool: OPT
-m4: REC
-make: ADD
-nasm: OPT
-oprofile: OPT
-p2c: OPT
-perl: REC
-pkgconfig: REC
-pmake: REC
-python: OPT
-python-demo: OPT
-python-tools: OPT
-rcs: OPT
-strace: REC
-subversion: OPT
-# Tagfile for emacs series
-emacs: ADD
-emacs-misc: REC
-emacs-lisp: OPT
-emacs-leim: OPT
-emacs-nox: OPT
-emacs-info: REC
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: F1 (Frequently Asked Questions)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-linux-faqs: ADD
-linux-howtos: ADD
-kernel-source: REC
-aalib: REC
-alsa-driver: ADD
-alsa-lib: ADD
-alsa-oss: OPT
-arts: ADD
-aspell: REC
-aspell-en: REC
-atk: REC
-audiofile: REC
-db3: REC
-db31: REC
-db4: REC
-esound: REC
-expat: REC
-fribidi: REC
-gdbm: REC
-gdk-pixbuf: REC
-glib: REC
-glib2: REC
-glibc: REC
-glibc-i18n: OPT
-glibc-profile: OPT
-glut: REC
-gmp: REC
-gnet: REC
-gtk+: REC
-gtk+2: REC
-imlib: REC
-jre: OPT
-lcms: REC
-lesstif: REC
-libao: REC
-libart_lgpl: REC
-libcaca: OPT
-libexif: REC
-libglade: REC
-libgsf: REC
-libgtkhtml: REC
-libid3tag: REC
-libidl: REC
-libidn: REC
-libieee1284: REC
-libjpeg: REC
-libmad: REC
-libmikmod: REC
-libmng: REC
-libogg: REC
-libpng: REC
-librsvg: REC
-libtermcap: REC
-libtiff: REC
-libungif: REC
-libusb: REC
-libvorbis: REC
-libwmf: REC
-libwmf-docs: OPT
-libwpd: REC
-libxml2: REC
-libxslt: REC
-mhash: REC
-mpeg_lib: OPT
-ncurses: REC
-netpbm: REC
-pango: REC
-pcre: REC
-pilot-link: REC
-popt: REC
-readline: REC
-sdl: REC
-shared-mime-info: REC
-slang: REC
-startup-notification: ADD
-svgalib: REC
-t1lib: REC
-taglib: REC
-wv2: REC
-xaw3d: REC
-zlib: REC
-# This is a Slackware Installation Tagfile.
-#           
-# This one comes from the N (Network/UUCP/Mail/News) series.
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-# 
-#
-apache: OPT
-autofs: OPT
-bind: REC
-bitchx: OPT
-bootp: OPT
-curl: OPT
-cyrus-sasl: REC
-dhcp: OPT
-dhcpcd: REC
-dnsmasq: OPT
-elm: OPT
-epic4: OPT
-fetchmail: OPT
-getmail: REC
-gnupg: OPT
-htdig: OPT
-imapd: OPT
-inetd: REC
-iproute2: OPT
-iptables: ADD
-iptraf: OPT
-irssi: OPT
-lftp: OPT
-links: OPT
-lynx: OPT
-metamail: REC
-mod_ssl: OPT
-mutt: OPT
-nail: REC
-nc: OPT
-ncftp: OPT
-netatalk: OPT
-netpipes: OPT
-netwatch: OPT
-newspost: OPT
-nfs-utils: OPT
-nmap: OPT
-nn: OPT
-ntp: OPT
-openssh: REC
-openssl: REC
-php: OPT
-pidentd: REC
-pine: OPT
-popa3d: REC
-portmap: REC
-ppp: OPT
-procmail: REC
-proftpd: OPT
-rdist: OPT
-rp-pppoe: OPT
-rsync: OPT
-samba: OPT
-sendmail-cf: OPT
-sendmail: REC
-slrn: OPT
-stunnel: OPT
-tcpdump: REC
-tcpip: REC
-tin: OPT
-traceroute: OPT
-trn: OPT
-uucp: OPT
-vsftpd: REC
-wget: OPT
-whois: OPT
-wireless-tools: OPT
-yptools: OPT
-ytalk: OPT
-tetex: ADD
-tetex-doc: REC
-xfig: OPT
-transfig: OPT
-# This is a Slackware Installation Tagfile.
-#           
-# This one comes from disk: TCL1 (Tcl/Tk series)
-# and a backup copy called "tagfile.org" can be found on the same disk. You
-# should never edit the "tagfile.org" copy, only the one called "tagfile". Use
-# the "tagfile.org" only if you want to restore original installation defaults
-# by copying it over the top of "tagfile".
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-#
-# If you mess this file up beyond recognition, just restore from "tagfile.org"
-# 
-#
-expect: OPT
-hfsutils: OPT
-tcl:  ADD
-tk:   REC
-tclx: REC
-tix: OPT
-x11: ADD
-x11-devel: ADD
-x11-docs: REC
-x11-docs-html: OPT
-x11-fonts-100dpi: OPT
-x11-fonts-cyrillic: OPT
-x11-fonts-misc: ADD
-x11-fonts-scale: ADD
-x11-xdmx: OPT
-x11-xnest: OPT
-x11-xvfb: OPT
-abiword: OPT
-blackbox: OPT
-fluxbox: OPT
-fvwm: REC
-gaim: OPT
-gftp: OPT
-gimp: REC
-gimp-help-2: REC
-gkrellm: OPT
-gnuchess: REC
-gnuplot: OPT
-gucharmap: OPT
-gv: REC
-gxine: OPT
-imagemagick: REC
-mozilla: REC
-mozilla-firefox: REC
-mozilla-thunderbird: REC
-pan: REC
-rxvt: REC
-sane: OPT
-seyon: OPT
-windowmaker: REC
-x3270: OPT
-xchat: OPT
-xfce: OPT
-xfm: OPT
-xfractint: OPT
-xgames: REC
-xine-lib: REC
-xine-ui: REC
-xpaint: OPT
-xpdf: OPT
-xmms: OPT
-xsane: OPT
-xlockmore: REC
-xscreensaver: REC
-xv: REC
-xvim: REC
-xxgdb: REC
-# This is a Slackware Installation Tagfile.
-#
-# This one comes from disk: Y1 (Yaaaaaahhoooo? Games and Amusements).
-# 
-# It is used to automate software installation. 
-# There are two labels that you can use: ADD and SKP.
-#
-# If the PROMPT option is used during installation, this file will be checked
-# to determine the installation default. First, all the lines beginning with
-# <package_name>: 
-# will be extracted. Then, the last line in the extracted segment will be 
-# checked for the flags ADD, REC, OPT and SKP.
-#
-# If ADD is found, then a priority of [required] will be displayed, and the
-# package will be automatically installed. 
-#
-# If SKP is found, then a priority of [skip] will be displayed, and
-# the package will be automatically skipped.
-#
-# All other packages will be prompted for. There are two optional flags you
-# can use to change the package priority level shown when the user is 
-# prompted: REC and OPT. If REC is found, the priority shown will be
-# [recommended], while if OPT is found, the user sees priority [optional].
-#
-# If no flags are found for a given package, the user is shown priority
-# [unknown], and is prompted for whether the package should be installed.
-bsd-games: OPT
-