new 'compact' template format

git-svn-id: svn+slack://slack.fluxo.info/var/svn/simplepkg@634 04377dda-e619-0410-9926-eae83683ac58

3 files changed, 0 insertions, 2168 deletions

diff --git a/trunk/templates/vserver/vserver.d/etc/apache/httpd.conf b/trunk/templates/vserver/vserver.d/etc/apache/httpd.conf
deleted file mode 100644
index 7b7115d..0000000
--- a/trunk/templates/vserver/vserver.d/etc/apache/httpd.conf
+++ /dev/null
@@ -1,1046 +0,0 @@
-##
-## httpd.conf -- Apache HTTP server configuration file
-##
-
-#
-# Based upon the NCSA server configuration files originally by Rob McCool.
-#
-# This is the main Apache server configuration file.  It contains the
-# configuration directives that give the server its instructions.
-# See <URL:http://httpd.apache.org/docs/> for detailed information about
-# the directives.
-#
-# Do NOT simply read the instructions in here without understanding
-# what they do.  They're here only as hints or reminders.  If you are unsure
-# consult the online docs. You have been warned.  
-#
-# After this file is processed, the server will look for and process
-# /etc/apache/srm.conf and then /etc/apache/access.conf
-# unless you have overridden these with ResourceConfig and/or
-# AccessConfig directives here.
-#
-# The configuration directives are grouped into three basic sections:
-#  1. Directives that control the operation of the Apache server process as a
-#     whole (the 'global environment').
-#  2. Directives that define the parameters of the 'main' or 'default' server,
-#     which responds to requests that aren't handled by a virtual host.
-#     These directives also provide default values for the settings
-#     of all virtual hosts.
-#  3. Settings for virtual hosts, which allow Web requests to be sent to
-#     different IP addresses or hostnames and have them handled by the
-#     same Apache server process.
-#
-# Configuration and logfile names: If the filenames you specify for many
-# of the server's control files begin with "/" (or "drive:/" for Win32), the
-# server will use that explicit path.  If the filenames do *not* begin
-# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
-# with ServerRoot set to "/usr/local/apache" will be interpreted by the
-# server as "/usr/local/apache/logs/foo.log".
-#
-
-### Section 1: Global Environment
-#
-# The directives in this section affect the overall operation of Apache,
-# such as the number of concurrent requests it can handle or where it
-# can find its configuration files.
-#
-
-#
-# ServerType is either inetd, or standalone.  Inetd mode is only supported on
-# Unix platforms.
-#
-ServerType standalone
-
-# ServerTokens directive
-ServerTokens ProductOnly
-
-#
-# ServerRoot: The top of the directory tree under which the server's
-# configuration, error, and log files are kept.
-#
-# NOTE!  If you intend to place this on an NFS (or otherwise network)
-# mounted filesystem then please read the LockFile documentation
-# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
-# you will save yourself a lot of trouble.
-#
-ServerRoot "/usr"
-
-#
-# The LockFile directive sets the path to the lockfile used when Apache
-# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
-# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
-# its default value. The main reason for changing it is if the logs
-# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
-# DISK. The PID of the main server process is automatically appended to
-# the filename. 
-#
-#LockFile /var/run/httpd.lock
-
-#
-# PidFile: The file in which the server should record its process
-# identification number when it starts.
-#
-PidFile /var/run/httpd.pid
-
-#
-# ScoreBoardFile: File used to store internal server process information.
-# Not all architectures require this.  But if yours does (you'll know because
-# this file will be  created when you run Apache) then you *must* ensure that
-# no two invocations of Apache share the same scoreboard file.
-#
-ScoreBoardFile /var/run/httpd.scoreboard
-
-#
-# In the standard configuration, the server will process httpd.conf (this 
-# file, specified by the -f command line option), srm.conf, and access.conf 
-# in that order.  The latter two files are now distributed empty, as it is 
-# recommended that all directives be kept in a single file for simplicity.  
-# The commented-out values below are the built-in defaults.  You can have the 
-# server ignore these files altogether by using "/dev/null" (for Unix) or
-# "nul" (for Win32) for the arguments to the directives.
-#
-#ResourceConfig /etc/apache/srm.conf
-#AccessConfig /etc/apache/access.conf
-
-#
-# Timeout: The number of seconds before receives and sends time out.
-#
-Timeout 300
-
-#
-# KeepAlive: Whether or not to allow persistent connections (more than
-# one request per connection). Set to "Off" to deactivate.
-#
-KeepAlive On
-
-#
-# MaxKeepAliveRequests: The maximum number of requests to allow
-# during a persistent connection. Set to 0 to allow an unlimited amount.
-# We recommend you leave this number high, for maximum performance.
-#
-MaxKeepAliveRequests 100
-
-#
-# KeepAliveTimeout: Number of seconds to wait for the next request from the
-# same client on the same connection.
-#
-KeepAliveTimeout 2
-
-#
-# Server-pool size regulation.  Rather than making you guess how many
-# server processes you need, Apache dynamically adapts to the load it
-# sees --- that is, it tries to maintain enough server processes to
-# handle the current load, plus a few spare servers to handle transient
-# load spikes (e.g., multiple simultaneous requests from a single
-# Netscape browser).
-#
-# It does this by periodically checking how many servers are waiting
-# for a request.  If there are fewer than MinSpareServers, it creates
-# a new spare.  If there are more than MaxSpareServers, some of the
-# spares die off.  The default values are probably OK for most sites.
-#
-MinSpareServers 5
-MaxSpareServers 10
-
-#
-# Number of servers to start initially --- should be a reasonable ballpark
-# figure.
-#
-StartServers 5
-
-#
-# Limit on total number of servers running, i.e., limit on the number
-# of clients who can simultaneously connect --- if this limit is ever
-# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
-# It is intended mainly as a brake to keep a runaway server from taking
-# the system with it as it spirals down...
-#
-MaxClients 150
-
-#
-# MaxRequestsPerChild: the number of requests each child process is
-# allowed to process before the child dies.  The child will exit so
-# as to avoid problems after prolonged use when Apache (and maybe the
-# libraries it uses) leak memory or other resources.  On most systems, this
-# isn't really needed, but a few (such as Solaris) do have notable leaks
-# in the libraries. For these platforms, set to something like 10000
-# or so; a setting of 0 means unlimited.
-#
-# NOTE: This value does not include keepalive requests after the initial
-#       request per connection. For example, if a child process handles
-#       an initial request and 10 subsequent "keptalive" requests, it
-#       would only count as 1 request towards this limit.
-#
-MaxRequestsPerChild 0
-
-#
-# Listen: Allows you to bind Apache to specific IP addresses and/or
-# ports, instead of the default. See also the <VirtualHost>
-# directive.
-#
-#Listen 3000
-#Listen 12.34.56.78:80
-
-#
-# BindAddress: You can support virtual hosts with this option. This directive
-# is used to tell the server which IP address to listen to. It can either
-# contain "*", an IP address, or a fully qualified Internet domain name.
-# See also the <VirtualHost> and Listen directives.
-#
-#BindAddress *
-
-#
-# Dynamic Shared Object (DSO) Support
-#
-# To be able to use the functionality of a module which was built as a DSO you
-# have to place corresponding `LoadModule' lines at this location so the
-# directives contained in it are actually available _before_ they are used.
-# Please read the file http://httpd.apache.org/docs/dso.html for more
-# details about the DSO mechanism and run `httpd -l' for the list of already
-# built-in (statically linked and thus always available) modules in your httpd
-# binary.
-#
-# Note: The order in which modules are loaded is important.  Don't change
-# the order below without expert advice.
-#
-# Example:
-# LoadModule foo_module libexec/mod_foo.so
-LoadModule vhost_alias_module libexec/apache/mod_vhost_alias.so
-#LoadModule env_module         libexec/apache/mod_env.so
-LoadModule define_module      libexec/apache/mod_define.so
-LoadModule config_log_module  libexec/apache/mod_log_config.so
-LoadModule mime_magic_module  libexec/apache/mod_mime_magic.so
-LoadModule mime_module        libexec/apache/mod_mime.so
-LoadModule negotiation_module libexec/apache/mod_negotiation.so
-#LoadModule status_module      libexec/apache/mod_status.so
-#LoadModule info_module        libexec/apache/mod_info.so
-LoadModule includes_module    libexec/apache/mod_include.so
-LoadModule autoindex_module   libexec/apache/mod_autoindex.so
-LoadModule dir_module         libexec/apache/mod_dir.so
-LoadModule cgi_module         libexec/apache/mod_cgi.so
-#LoadModule asis_module        libexec/apache/mod_asis.so
-#LoadModule imap_module        libexec/apache/mod_imap.so
-#LoadModule action_module      libexec/apache/mod_actions.so
-#LoadModule speling_module     libexec/apache/mod_speling.so
-#LoadModule userdir_module     libexec/apache/mod_userdir.so
-LoadModule alias_module       libexec/apache/mod_alias.so
-LoadModule rewrite_module     libexec/apache/mod_rewrite.so
-LoadModule access_module      libexec/apache/mod_access.so
-LoadModule auth_module        libexec/apache/mod_auth.so
-LoadModule anon_auth_module   libexec/apache/mod_auth_anon.so
-#LoadModule dbm_auth_module    libexec/apache/mod_auth_dbm.so
-#LoadModule digest_module      libexec/apache/mod_digest.so
-LoadModule proxy_module       libexec/apache/libproxy.so
-LoadModule cern_meta_module   libexec/apache/mod_cern_meta.so
-LoadModule expires_module     libexec/apache/mod_expires.so
-LoadModule headers_module     libexec/apache/mod_headers.so
-#LoadModule usertrack_module   libexec/apache/mod_usertrack.so
-#LoadModule log_forensic_module libexec/apache/mod_log_forensic.so
-#LoadModule unique_id_module   libexec/apache/mod_unique_id.so
-LoadModule setenvif_module    libexec/apache/mod_setenvif.so
-
-#  Reconstruction of the complete module list from all available modules
-#  (static and shared ones) to achieve correct module execution order.
-#  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
-ClearModuleList
-AddModule mod_vhost_alias.c
-#AddModule mod_env.c
-AddModule mod_define.c
-AddModule mod_log_config.c
-AddModule mod_mime_magic.c
-AddModule mod_mime.c
-AddModule mod_negotiation.c
-#AddModule mod_status.c
-#AddModule mod_info.c
-AddModule mod_include.c
-AddModule mod_autoindex.c
-AddModule mod_dir.c
-AddModule mod_cgi.c
-#AddModule mod_asis.c
-#AddModule mod_imap.c
-#AddModule mod_actions.c
-#AddModule mod_speling.c
-#AddModule mod_userdir.c
-AddModule mod_alias.c
-AddModule mod_rewrite.c
-AddModule mod_access.c
-AddModule mod_auth.c
-AddModule mod_auth_anon.c
-#AddModule mod_auth_dbm.c
-#AddModule mod_digest.c
-AddModule mod_proxy.c
-AddModule mod_cern_meta.c
-AddModule mod_expires.c
-AddModule mod_headers.c
-#AddModule mod_usertrack.c
-#AddModule mod_log_forensic.c
-#AddModule mod_unique_id.c
-AddModule mod_so.c
-AddModule mod_setenvif.c
-
-#
-# ExtendedStatus controls whether Apache will generate "full" status
-# information (ExtendedStatus On) or just basic information (ExtendedStatus
-# Off) when the "server-status" handler is called. The default is Off.
-#
-#ExtendedStatus On
-
-### Section 2: 'Main' server configuration
-#
-# The directives in this section set up the values used by the 'main'
-# server, which responds to any requests that aren't handled by a
-# <VirtualHost> definition.  These values also provide defaults for
-# any <VirtualHost> containers you may define later in the file.
-#
-# All of these directives may appear inside <VirtualHost> containers,
-# in which case these default settings will be overridden for the
-# virtual host being defined.
-#
-
-#
-# If your ServerType directive (set earlier in the 'Global Environment'
-# section) is set to "inetd", the next few directives don't have any
-# effect since their settings are defined by the inetd configuration.
-# Skip ahead to the ServerAdmin directive.
-#
-
-#
-# Port: The port to which the standalone server listens. For
-# ports < 1023, you will need httpd to be run as root initially.
-#
-Port 80
-
-#
-# If you wish httpd to run as a different user or group, you must run
-# httpd as root initially and it will switch.  
-#
-# User/Group: The name (or #number) of the user/group to run httpd as.
-#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
-#  . On HPUX you may not be able to use shared memory as nobody, and the
-#    suggested workaround is to create a user www and use that user.
-#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
-#  when the value of (unsigned)Group is above 60000; 
-#  don't use Group "#-1" on these systems!
-#
-User nobody
-Group nobody
-
-#
-# ServerAdmin: Your address, where problems with the server should be
-# e-mailed.  This address appears on some server-generated pages, such
-# as error documents.
-#
-ServerAdmin root@midas.slackware.lan
-
-#
-# ServerName allows you to set a host name which is sent back to clients for
-# your server if it's different than the one the program would get (i.e., use
-# "www" instead of the host's real name).
-#
-# Note: You cannot just invent host names and hope they work. The name you 
-# define here must be a valid DNS name for your host. If you don't understand
-# this, ask your network administrator.
-# If your host doesn't have a registered DNS name, enter its IP address here.
-# You will have to access it by its address (e.g., http://123.45.67.89/)
-# anyway, and this will make redirections work in a sensible way.
-#
-# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your 
-# machine always knows itself by this address. If you use Apache strictly for 
-# local testing and development, you may use 127.0.0.1 as the server name.
-#
-#ServerName www.example.com
-
-#
-# DocumentRoot: The directory out of which you will serve your
-# documents. By default, all requests are taken from this directory, but
-# symbolic links and aliases may be used to point to other locations.
-#
-DocumentRoot "/var/www/htdocs"
-
-#
-# Each directory to which Apache has access, can be configured with respect
-# to which services and features are allowed and/or disabled in that
-# directory (and its subdirectories). 
-#
-# First, we configure the "default" to be a very restrictive set of 
-# permissions.  
-#
-<Directory />
-    Options FollowSymLinks
-    AllowOverride None
-</Directory>
-
-#
-# Note that from this point forward you must specifically allow
-# particular features to be enabled - so if something's not working as
-# you might expect, make sure that you have specifically enabled it
-# below.
-#
-
-#
-# This should be changed to whatever you set DocumentRoot to.
-#
-<Directory "/var/www/htdocs">
-
-#
-# This may also be "None", "All", or any combination of "Indexes",
-# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
-#
-# Note that "MultiViews" must be named *explicitly* --- "Options All"
-# doesn't give it to you.
-#
-    Options Indexes FollowSymLinks MultiViews
-
-#
-# This controls which options the .htaccess files in directories can
-# override. Can also be "All", or any combination of "Options", "FileInfo", 
-# "AuthConfig", and "Limit"
-#
-    AllowOverride None
-
-#
-# Controls who can get stuff from this server.
-#
-    Order allow,deny
-    Allow from all
-</Directory>
-
-#
-# UserDir: The name of the directory which is appended onto a user's home
-# directory if a ~user request is received.
-#
-<IfModule mod_userdir.c>
-    UserDir public_html
-</IfModule>
-
-#
-# Control access to UserDir directories.  The following is an example
-# for a site where these directories are restricted to read-only.
-#
-#<Directory /home/*/public_html>
-#    AllowOverride FileInfo AuthConfig Limit
-#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
-#    <Limit GET POST OPTIONS PROPFIND>
-#        Order allow,deny
-#        Allow from all
-#    </Limit>
-#    <LimitExcept GET POST OPTIONS PROPFIND>
-#        Order deny,allow
-#        Deny from all
-#    </LimitExcept>
-#</Directory>
-
-#
-# DirectoryIndex: Name of the file or files to use as a pre-written HTML
-# directory index.  Separate multiple entries with spaces.
-#
-<IfModule mod_dir.c>
-    DirectoryIndex index.html
-</IfModule>
-
-#
-# AccessFileName: The name of the file to look for in each directory
-# for access control information.
-#
-AccessFileName .htaccess
-
-#
-# The following lines prevent .htaccess files from being viewed by
-# Web clients.  Since .htaccess files often contain authorization
-# information, access is disallowed for security reasons.  Comment
-# these lines out if you want Web visitors to see the contents of
-# .htaccess files.  If you change the AccessFileName directive above,
-# be sure to make the corresponding changes here.
-#
-# Also, folks tend to use names such as .htpasswd for password
-# files, so this will protect those as well.
-#
-<Files ~ "^\.ht">
-    Order allow,deny
-    Deny from all
-    Satisfy All
-</Files>
-
-#
-# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
-# document that was negotiated on the basis of content. This asks proxy
-# servers not to cache the document. Uncommenting the following line disables
-# this behavior, and proxies will be allowed to cache the documents.
-#
-#CacheNegotiatedDocs
-
-#
-# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
-# Apache needs to construct a self-referencing URL (a URL that refers back
-# to the server the response is coming from) it will use ServerName and
-# Port to form a "canonical" name.  With this setting off, Apache will
-# use the hostname:port that the client supplied, when possible.  This
-# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
-#
-UseCanonicalName On
-
-#
-# TypesConfig describes where the mime.types file (or equivalent) is
-# to be found.
-#
-<IfModule mod_mime.c>
-    TypesConfig /etc/apache/mime.types
-</IfModule>
-
-#
-# DefaultType is the default MIME type the server will use for a document
-# if it cannot otherwise determine one, such as from filename extensions.
-# If your server contains mostly text or HTML documents, "text/plain" is
-# a good value.  If most of your content is binary, such as applications
-# or images, you may want to use "application/octet-stream" instead to
-# keep browsers from trying to display binary files as though they are
-# text.
-#
-DefaultType text/plain
-
-#
-# The mod_mime_magic module allows the server to use various hints from the
-# contents of the file itself to determine its type.  The MIMEMagicFile
-# directive tells the module where the hint definitions are located.
-# mod_mime_magic is not part of the default server (you have to add
-# it yourself with a LoadModule [see the DSO paragraph in the 'Global
-# Environment' section], or recompile the server and include mod_mime_magic
-# as part of the configuration), so it's enclosed in an <IfModule> container.
-# This means that the MIMEMagicFile directive will only be processed if the
-# module is part of the server.
-#
-<IfModule mod_mime_magic.c>
-    MIMEMagicFile /etc/apache/magic
-</IfModule>
-
-#
-# HostnameLookups: Log the names of clients or just their IP addresses
-# e.g., www.apache.org (on) or 204.62.129.132 (off).
-# The default is off because it'd be overall better for the net if people
-# had to knowingly turn this feature on, since enabling it means that
-# each client request will result in AT LEAST one lookup request to the
-# nameserver.
-#
-HostnameLookups Off
-
-#
-# ErrorLog: The location of the error log file.
-# If you do not specify an ErrorLog directive within a <VirtualHost>
-# container, error messages relating to that virtual host will be
-# logged here.  If you *do* define an error logfile for a <VirtualHost>
-# container, that host's errors will be logged there and not here.
-#
-ErrorLog "| /usr/bin/error-log.sh /var/log/apache/error_log"
-
-#
-# LogLevel: Control the number of messages logged to the error_log.
-# Possible values include: debug, info, notice, warn, error, crit,
-# alert, emerg.
-#
-LogLevel warn
-
-#
-# The following directives define some format nicknames for use with
-# a CustomLog directive (see below).
-#
-LogFormat "%l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
-LogFormat "%l %u %t \"%r\" %>s %b" common
-LogFormat "%{Referer}i -> %U" referer
-LogFormat "%{User-agent}i" agent
-
-#
-# The location and format of the access logfile (Common Logfile Format).
-# If you do not define any access logfiles within a <VirtualHost>
-# container, they will be logged here.  Contrariwise, if you *do*
-# define per-<VirtualHost> access logfiles, transactions will be
-# logged therein and *not* in this file.
-#
-CustomLog /var/log/apache/access_log common
-
-#
-# If you would like to have agent and referer logfiles, uncomment the
-# following directives.
-#
-#CustomLog /var/log/apache/referer_log referer
-#CustomLog /var/log/apache/agent_log agent
-
-#
-# If you prefer a single logfile with access, agent, and referer information
-# (Combined Logfile Format) you can use the following directive.
-#
-#CustomLog /var/log/apache/access_log combined
-
-#
-# Optionally add a line containing the server version and virtual host
-# name to server-generated pages (error documents, FTP directory listings,
-# mod_status and mod_info output etc., but not CGI generated documents).
-# Set to "EMail" to also include a mailto: link to the ServerAdmin.
-# Set to one of:  On | Off | EMail
-#
-ServerSignature Off
-
-# EBCDIC configuration:
-# (only for mainframes using the EBCDIC codeset, currently one of:
-# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
-# The following default configuration assumes that "text files"
-# are stored in EBCDIC (so that you can operate on them using the
-# normal POSIX tools like grep and sort) while "binary files" are
-# stored with identical octets as on an ASCII machine.
-#
-# The directives are evaluated in configuration file order, with
-# the EBCDICConvert directives applied before EBCDICConvertByType.
-#
-# If you want to have ASCII HTML documents and EBCDIC HTML documents
-# at the same time, you can use the file extension to force
-# conversion off for the ASCII documents:
-# > AddType       text/html .ahtml
-# > EBCDICConvert Off=InOut .ahtml
-#
-# EBCDICConvertByType  On=InOut text/* message/* multipart/*
-# EBCDICConvertByType  On=In    application/x-www-form-urlencoded
-# EBCDICConvertByType  On=InOut application/postscript model/vrml
-# EBCDICConvertByType Off=InOut */*
-
-
-#
-# Aliases: Add here as many aliases as you need (with no limit). The format is 
-# Alias fakename realname
-#
-<IfModule mod_alias.c>
-
-    #
-    # Note that if you include a trailing / on fakename then the server will
-    # require it to be present in the URL.  So "/icons" isn't aliased in this
-    # example, only "/icons/".  If the fakename is slash-terminated, then the 
-    # realname must also be slash terminated, and if the fakename omits the 
-    # trailing slash, the realname must also omit it.
-    #
-    Alias /icons/ "/var/www/icons/"
-
-    <Directory "/var/www/icons">
-        Options Indexes MultiViews
-        AllowOverride None
-        Order allow,deny
-        Allow from all
-    </Directory>
-
-    # This Alias will project the on-line documentation tree under /manual/
-    # even if you change the DocumentRoot. Comment it if you don't want to 
-    # provide access to the on-line documentation.
-    #
-    Alias /manual/ "/var/www/htdocs/manual/"
-
-    <Directory "/var/www/htdocs/manual">
-        Options Indexes FollowSymlinks MultiViews
-        AllowOverride None
-        Order allow,deny
-        Allow from all
-    </Directory>
-
-    #
-    # ScriptAlias: This controls which directories contain server scripts.
-    # ScriptAliases are essentially the same as Aliases, except that
-    # documents in the realname directory are treated as applications and
-    # run by the server when requested rather than as documents sent to the client.
-    # The same rules about trailing "/" apply to ScriptAlias directives as to
-    # Alias.
-    #
-    ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
-
-    #
-    # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
-    # CGI directory exists, if you have that configured.
-    #
-    <Directory "/var/www/cgi-bin">
-        AllowOverride None
-        Options None
-        Order allow,deny
-        Allow from all
-    </Directory>
-
-</IfModule>
-# End of aliases.
-
-#
-# Redirect allows you to tell clients about documents which used to exist in
-# your server's namespace, but do not anymore. This allows you to tell the
-# clients where to look for the relocated document.
-# Format: Redirect old-URI new-URL
-#
-
-#
-# Directives controlling the display of server-generated directory listings.
-#
-<IfModule mod_autoindex.c>
-
-    #
-    # FancyIndexing is whether you want fancy directory indexing or standard
-    #
-    IndexOptions FancyIndexing
-
-    #
-    # AddIcon* directives tell the server which icon to show for different
-    # files or filename extensions.  These are only displayed for
-    # FancyIndexed directories.
-    #
-    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
-
-    AddIconByType (TXT,/icons/text.gif) text/*
-    AddIconByType (IMG,/icons/image2.gif) image/*
-    AddIconByType (SND,/icons/sound2.gif) audio/*
-    AddIconByType (VID,/icons/movie.gif) video/*
-
-    AddIcon /icons/binary.gif .bin .exe
-    AddIcon /icons/binhex.gif .hqx
-    AddIcon /icons/tar.gif .tar
-    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
-    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
-    AddIcon /icons/a.gif .ps .ai .eps
-    AddIcon /icons/layout.gif .html .shtml .htm .pdf
-    AddIcon /icons/text.gif .txt
-    AddIcon /icons/c.gif .c
-    AddIcon /icons/p.gif .pl .py
-    AddIcon /icons/f.gif .for
-    AddIcon /icons/dvi.gif .dvi
-    AddIcon /icons/uuencoded.gif .uu
-    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
-    AddIcon /icons/tex.gif .tex
-    AddIcon /icons/bomb.gif core
-
-    AddIcon /icons/back.gif ..
-    AddIcon /icons/hand.right.gif README
-    AddIcon /icons/folder.gif ^^DIRECTORY^^
-    AddIcon /icons/blank.gif ^^BLANKICON^^
-
-    #
-    # DefaultIcon is which icon to show for files which do not have an icon
-    # explicitly set.
-    #
-    DefaultIcon /icons/unknown.gif
-
-    #
-    # AddDescription allows you to place a short description after a file in
-    # server-generated indexes.  These are only displayed for FancyIndexed
-    # directories.
-    # Format: AddDescription "description" filename
-    #
-    #AddDescription "GZIP compressed document" .gz
-    #AddDescription "tar archive" .tar
-    #AddDescription "GZIP compressed tar archive" .tgz
-
-    #
-    # ReadmeName is the name of the README file the server will look for by
-    # default, and append to directory listings.
-    #
-    # HeaderName is the name of a file which should be prepended to
-    # directory indexes. 
-    #
-    ReadmeName README.html
-    HeaderName HEADER.html
-
-    #
-    # IndexIgnore is a set of filenames which directory indexing should ignore
-    # and not include in the listing.  Shell-style wildcarding is permitted.
-    #
-    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
-
-</IfModule>
-# End of indexing directives.
-
-#
-# Document types.
-#
-<IfModule mod_mime.c>
-
-    #
-    # AddLanguage allows you to specify the language of a document. You can
-    # then use content negotiation to give a browser a file in a language
-    # it can understand.  
-    #
-    # Note 1: The suffix does not have to be the same as the language 
-    # keyword --- those with documents in Polish (whose net-standard 
-    # language code is pl) may wish to use "AddLanguage pl .po" to 
-    # avoid the ambiguity with the common suffix for perl scripts.
-    #
-    # Note 2: The example entries below illustrate that in quite
-    # some cases the two character 'Language' abbreviation is not
-    # identical to the two character 'Country' code for its country,
-    # E.g. 'Danmark/dk' versus 'Danish/da'.
-    #
-    # Note 3: In the case of 'ltz' we violate the RFC by using a three char 
-    # specifier. But there is 'work in progress' to fix this and get 
-    # the reference data for rfc1766 cleaned up.
-    #
-    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
-    # French (fr) - German (de) - Greek-Modern (el)
-    # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
-    # Portugese (pt) - Luxembourgeois* (ltz)
-    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
-    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
-    # Russian (ru)
-    #
-    AddLanguage da .dk
-    AddLanguage nl .nl
-    AddLanguage en .en
-    AddLanguage et .ee
-    AddLanguage fr .fr
-    AddLanguage de .de
-    AddLanguage el .el
-    AddLanguage he .he
-    AddCharset ISO-8859-8 .iso8859-8
-    AddLanguage it .it
-    AddLanguage ja .ja
-    AddCharset ISO-2022-JP .jis
-    AddLanguage kr .kr
-    AddCharset ISO-2022-KR .iso-kr
-    AddLanguage nn .nn
-    AddLanguage no .no
-    AddLanguage pl .po
-    AddCharset ISO-8859-2 .iso-pl
-    AddLanguage pt .pt
-    AddLanguage pt-br .pt-br
-    AddLanguage ltz .lu
-    AddLanguage ca .ca
-    AddLanguage es .es
-    AddLanguage sv .sv
-    AddLanguage cs .cz .cs
-    AddLanguage ru .ru
-    AddLanguage zh-TW .zh-tw
-    AddCharset Big5         .Big5    .big5
-    AddCharset WINDOWS-1251 .cp-1251
-    AddCharset CP866        .cp866
-    AddCharset ISO-8859-5   .iso-ru
-    AddCharset KOI8-R       .koi8-r
-    AddCharset UCS-2        .ucs2
-    AddCharset UCS-4        .ucs4
-    AddCharset UTF-8        .utf8
-
-    # LanguagePriority allows you to give precedence to some languages
-    # in case of a tie during content negotiation.
-    #
-    # Just list the languages in decreasing order of preference. We have
-    # more or less alphabetized them here. You probably want to change this.
-    #
-    <IfModule mod_negotiation.c>
-        LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
-    </IfModule>
-
-    #
-    # AddType allows you to tweak mime.types without actually editing it, or to
-    # make certain files to be certain types.
-    #
-    AddType application/x-tar .tgz
-
-    #
-    # AddEncoding allows you to have certain browsers uncompress
-    # information on the fly. Note: Not all browsers support this.
-    # Despite the name similarity, the following Add* directives have nothing
-    # to do with the FancyIndexing customization directives above.
-    #
-    AddEncoding x-compress .Z
-    AddEncoding x-gzip .gz .tgz
-    #
-    # If the AddEncoding directives above are commented-out, then you
-    # probably should define those extensions to indicate media types:
-    #
-    #AddType application/x-compress .Z
-    #AddType application/x-gzip .gz .tgz
-
-    #
-    # AddHandler allows you to map certain file extensions to "handlers",
-    # actions unrelated to filetype. These can be either built into the server
-    # or added with the Action command (see below)
-    #
-    # If you want to use server side includes, or CGI outside
-    # ScriptAliased directories, uncomment the following lines.
-    #
-    # To use CGI scripts:
-    #
-    #AddHandler cgi-script .cgi
-
-    #
-    # To use server-parsed HTML files
-    #
-    #AddType text/html .shtml
-    #AddHandler server-parsed .shtml
-
-    #
-    # Uncomment the following line to enable Apache's send-asis HTTP file
-    # feature
-    #
-    #AddHandler send-as-is asis
-
-    #
-    # If you wish to use server-parsed imagemap files, use
-    #
-    #AddHandler imap-file map
-
-    #
-    # To enable type maps, you might want to use
-    #
-    #AddHandler type-map var
-
-</IfModule>
-# End of document types.
-
-#
-# Action lets you define media types that will execute a script whenever
-# a matching file is called. This eliminates the need for repeated URL
-# pathnames for oft-used CGI file processors.
-# Format: Action media/type /cgi-script/location
-# Format: Action handler-name /cgi-script/location
-#
-
-#
-# MetaDir: specifies the name of the directory in which Apache can find
-# meta information files. These files contain additional HTTP headers
-# to include when sending the document
-#
-#MetaDir .web
-
-#
-# MetaSuffix: specifies the file name suffix for the file containing the
-# meta information.
-#
-#MetaSuffix .meta
-
-#
-# Customizable error response (Apache style)
-#  these come in three flavors
-#
-#    1) plain text
-ErrorDocument 500 /missing.html
-#  n.b.  the single leading (") marks it as text, it does not get output
-#
-#    2) local redirects
-ErrorDocument 404 /missing.html
-#  to redirect to local URL /missing.html
-#ErrorDocument 404 /cgi-bin/missing_handler.pl
-#  N.B.: You can redirect to a script or a document using server-side-includes.
-#
-#    3) external redirects
-ErrorDocument 402 /missing.html
-#  N.B.: Many of the environment variables associated with the original
-#  request will *not* be available to such a script.
-
-#
-# Customize behaviour based on the browser
-#
-<IfModule mod_setenvif.c>
-
-    #
-    # The following directives modify normal HTTP response behavior.
-    # The first directive disables keepalive for Netscape 2.x and browsers that
-    # spoof it. There are known problems with these browser implementations.
-    # The second directive is for Microsoft Internet Explorer 4.0b2
-    # which has a broken HTTP/1.1 implementation and does not properly
-    # support keepalive when it is used on 301 or 302 (redirect) responses.
-    #
-    BrowserMatch "Mozilla/2" nokeepalive
-    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
-
-    #
-    # The following directive disables HTTP/1.1 responses to browsers which
-    # are in violation of the HTTP/1.0 spec by not being able to grok a
-    # basic 1.1 response.
-    #
-    BrowserMatch "RealPlayer 4\.0" force-response-1.0
-    BrowserMatch "Java/1\.0" force-response-1.0
-    BrowserMatch "JDK/1\.0" force-response-1.0
-
-</IfModule>
-# End of browser customization directives
-
-#
-# Allow server status reports, with the URL of http://servername/server-status
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-status>
-#    SetHandler server-status
-#    Order deny,allow
-#    Deny from all
-#    Allow from .example.com
-#</Location>
-
-#
-# Allow remote server configuration reports, with the URL of
-# http://servername/server-info (requires that mod_info.c be loaded).
-# Change the ".example.com" to match your domain to enable.
-#
-#<Location /server-info>
-#    SetHandler server-info
-#    Order deny,allow
-#    Deny from all
-#    Allow from .example.com
-#</Location>
-
-#
-# There have been reports of people trying to abuse an old bug from pre-1.1
-# days.  This bug involved a CGI script distributed as a part of Apache.
-# By uncommenting these lines you can redirect these attacks to a logging 
-# script on phf.apache.org.  Or, you can record them yourself, using the script
-# support/phf_abuse_log.cgi.
-#
-#<Location /cgi-bin/phf*>
-#    Deny from all
-#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
-#</Location>
-
-### Section 3: Virtual Hosts
-#
-# VirtualHost: If you want to maintain multiple domains/hostnames on your
-# machine you can setup VirtualHost containers for them. Most configurations
-# use only name-based virtual hosts so the server doesn't need to worry about
-# IP addresses. This is indicated by the asterisks in the directives below.
-#
-# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
-# for further details before you try to setup virtual hosts.
-#
-# You may use the command line option '-S' to verify your virtual host
-# configuration.
-
-#
-# Use name-based virtual hosting.
-#
-#NameVirtualHost *:80
-
-#
-# VirtualHost example:
-# Almost any Apache directive may go into a VirtualHost container.
-# The first VirtualHost section is used for requests without a known
-# server name.
-#
-#<VirtualHost *:80>
-#    ServerAdmin webmaster@dummy-host.example.com
-#    DocumentRoot /www/docs/dummy-host.example.com
-#    ServerName dummy-host.example.com
-#    ErrorLog logs/dummy-host.example.com-error_log
-#    CustomLog logs/dummy-host.example.com-access_log common
-#</VirtualHost>
-
-# By default, all external Apache modules are disabled.  To enable a particular
-# module for Apache, make sure the necessary packages are installed.  Then
-# uncomment the appropriate Include line below, save the file, and restart
-# Apache.  Note that some modules may need additional configuration steps.  For
-# example, mod_ssl requires a site certificate which you may need to generate.
-#
-# Lastly, if you remove a module package, be sure to edit this file and comment
-# out the appropriate Include line.
-
-# ==> mod_php configuration settings <==
-#
-# PACKAGES REQUIRED:  openssl-solibs (A series) and/or openssl (N series),
-#                     mysql (AP series), gmp (L series), mhash (L series),
-#                     and apache (N series)
-#
-#Include /etc/apache/mod_php.conf
-
-# ==> mod_ssl configuration settings <==
-#
-# PACKAGES REQUIRED:  apache (N series) and openssl (N series)
-#
-#Include /etc/apache/mod_ssl.conf
-
-#NameVirtualHost VSERVER_IP
-
-Include /etc/apache/vhosts
diff --git a/trunk/templates/vserver/vserver.d/etc/apache/php.ini b/trunk/templates/vserver/vserver.d/etc/apache/php.ini
deleted file mode 100644
index e6cddef..0000000
--- a/trunk/templates/vserver/vserver.d/etc/apache/php.ini
+++ /dev/null
@@ -1,1122 +0,0 @@
-[PHP]
-
-;;;;;;;;;;;;;;;;;;;
-; About this file ;
-;;;;;;;;;;;;;;;;;;;
-;
-; This is the recommended, PHP 4-style version of the php.ini-dist file.  It
-; sets some non standard settings, that make PHP more efficient, more secure,
-; and encourage cleaner coding.
-; The price is that with these settings, PHP may be incompatible with some
-; applications, and sometimes, more difficult to develop with.  Using this
-; file is warmly recommended for production sites.  As all of the changes from
-; the standard settings are thoroughly documented, you can go over each one,
-; and decide whether you want to use it or not.
-;
-; For general information about the php.ini file, please consult the php.ini-dist
-; file, included in your PHP distribution.
-;
-; This file is different from the php.ini-dist file in the fact that it features
-; different values for several directives, in order to improve performance, while
-; possibly breaking compatibility with the standard out-of-the-box behavior of
-; PHP 3.  Please make sure you read what's different, and modify your scripts
-; accordingly, if you decide to use this file instead.
-;
-; - register_globals = Off         [Security, Performance]
-;     Global variables are no longer registered for input data (POST, GET, cookies,
-;     environment and other server variables).  Instead of using $foo, you must use
-;     you can use $_REQUEST["foo"] (includes any variable that arrives through the
-;     request, namely, POST, GET and cookie variables), or use one of the specific
-;     $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
-;     on where the input originates.  Also, you can look at the
-;     import_request_variables() function.
-;     Note that register_globals is going to be depracated (i.e., turned off by
-;     default) in the next version of PHP, because it often leads to security bugs.
-;     Read http://php.net/manual/en/security.registerglobals.php for further
-;     information.
-; - display_errors = Off           [Security]
-;     With this directive set to off, errors that occur during the execution of
-;     scripts will no longer be displayed as a part of the script output, and thus,
-;     will no longer be exposed to remote users.  With some errors, the error message
-;     content may expose information about your script, web server, or database
-;     server that may be exploitable for hacking.  Production sites should have this
-;     directive set to off.
-; - log_errors = On                [Security]
-;     This directive complements the above one.  Any errors that occur during the
-;     execution of your script will be logged (typically, to your server's error log,
-;     but can be configured in several ways).  Along with setting display_errors to off,
-;     this setup gives you the ability to fully understand what may have gone wrong,
-;     without exposing any sensitive information to remote users.
-; - output_buffering = 4096        [Performance]
-;     Set a 4KB output buffer.  Enabling output buffering typically results in less
-;     writes, and sometimes less packets sent on the wire, which can often lead to
-;     better performance.  The gain this directive actually yields greatly depends
-;     on which Web server you're working with, and what kind of scripts you're using.
-; - register_argc_argv = Off       [Performance]
-;     Disables registration of the somewhat redundant $argv and $argc global
-;     variables.
-; - magic_quotes_gpc = Off         [Performance]
-;     Input data is no longer escaped with slashes so that it can be sent into
-;     SQL databases without further manipulation.  Instead, you should use the
-;     function addslashes() on each input element you wish to send to a database.
-; - variables_order = "GPCS"       [Performance]
-;     The environment variables are not hashed into the $HTTP_ENV_VARS[].  To access
-;     environment variables, you can use getenv() instead.
-; - error_reporting = E_ALL        [Code Cleanliness, Security(?)]
-;     By default, PHP surpresses errors of type E_NOTICE.  These error messages
-;     are emitted for non-critical errors, but that could be a symptom of a bigger
-;     problem.  Most notably, this will cause error messages about the use
-;     of uninitialized variables to be displayed.
-; - allow_call_time_pass_reference = Off     [Code cleanliness]
-;     It's not possible to decide to force a variable to be passed by reference
-;     when calling a function.  The PHP 4 style to do this is by making the
-;     function require the relevant argument by reference.
-
-
-;;;;;;;;;;;;;;;;;;;;
-; Language Options ;
-;;;;;;;;;;;;;;;;;;;;
-
-; Enable the PHP scripting language engine under Apache.
-engine = On
-
-; Allow the <? tag.  Otherwise, only <?php and <script> tags are recognized.  
-; NOTE: Using short tags should be avoided when developing applications or
-; libraries that are meant for redistribution, or deployment on PHP
-; servers which are not under your control, because short tags may not
-; be supported on the target server. For portable, redistributable code,
-; be sure not to use short tags.
-short_open_tag = On
-
-; Allow ASP-style <% %> tags.
-asp_tags = Off
-
-; The number of significant digits displayed in floating point numbers.
-precision    =  14
-
-; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
-y2k_compliance = On
-
-; Output buffering allows you to send header lines (including cookies) even
-; after you send body content, at the price of slowing PHP's output layer a
-; bit.  You can enable output buffering during runtime by calling the output
-; buffering functions.  You can also enable output buffering for all files by
-; setting this directive to On.  If you wish to limit the size of the buffer
-; to a certain size - you can use a maximum number of bytes instead of 'On', as
-; a value for this directive (e.g., output_buffering=4096).
-output_buffering = 4096
-
-; You can redirect all of the output of your scripts to a function.  For
-; example, if you set output_handler to "mb_output_handler", character
-; encoding will be transparently converted to the specified encoding.
-; Setting any output handler automatically turns on output buffering.
-; Note: People who wrote portable scripts should not depend on this ini
-;       directive. Instead, explicitly set the output handler using ob_start().
-;       Using this ini directive may cause problems unless you know what script 
-;       is doing.
-; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
-;       and you cannot use both "ob_gzhandler" and "zlib.output_compression". 
-;output_handler =
-
-; Transparent output compression using the zlib library
-; Valid values for this option are 'off', 'on', or a specific buffer size
-; to be used for compression (default is 4KB)
-; Note: Resulting chunk size may vary due to nature of compression. PHP 
-;       outputs chunks that are few handreds bytes each as a result of compression. 
-;       If you want larger chunk size for better performence, enable output_buffering 
-;       also. 
-; Note: output_handler must be empty if this is set 'On' !!!!
-;       Instead you must use zlib.output_handler.
-zlib.output_compression = Off
-
-; You cannot specify additional output handlers if zlib.output_compression
-; is activated here. This setting does the same as output_handler but in
-; a different order.
-;zlib.output_handler =
-
-; Implicit flush tells PHP to tell the output layer to flush itself
-; automatically after every output block.  This is equivalent to calling the
-; PHP function flush() after each and every call to print() or echo() and each
-; and every HTML block.  Turning this option on has serious performance
-; implications and is generally recommended for debugging purposes only.
-implicit_flush = Off
-
-; The unserialize callback function will be called (with the undefined class'
-; name as parameter), if the unserializer finds an undefined class
-; which should be instanciated.
-; A warning appears if the specified function is not defined, or if the
-; function doesn't include/implement the missing class.
-; So only set this entry, if you really want to implement such a 
-; callback-function.
-unserialize_callback_func=
-
-; When floats & doubles are serialized store serialize_precision significant
-; digits after the floating point. The default value ensures that when floats
-; are decoded with unserialize, the data will remain the same.
-serialize_precision = 100
-
-; Whether to enable the ability to force arguments to be passed by reference
-; at function call time.  This method is deprecated and is likely to be
-; unsupported in future versions of PHP/Zend.  The encouraged method of
-; specifying which arguments should be passed by reference is in the function
-; declaration.  You're encouraged to try and turn this option Off and make
-; sure your scripts work properly with it in order to ensure they will work
-; with future versions of the language (you will receive a warning each time
-; you use this feature, and the argument will be passed by value instead of by
-; reference).
-allow_call_time_pass_reference = Off
-
-;
-; Safe Mode
-;
-safe_mode = Off
-
-; By default, Safe Mode does a UID compare check when
-; opening files. If you want to relax this to a GID compare,
-; then turn on safe_mode_gid.
-safe_mode_gid = Off
-
-; When safe_mode is on, UID/GID checks are bypassed when
-; including files from this directory and its subdirectories.
-; (directory must also be in include_path or full path must
-; be used when including)
-safe_mode_include_dir =								
-
-; When safe_mode is on, only executables located in the safe_mode_exec_dir
-; will be allowed to be executed via the exec family of functions.
-safe_mode_exec_dir =
-
-; Setting certain environment variables may be a potential security breach.
-; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
-; the user may only alter environment variables whose names begin with the
-; prefixes supplied here.  By default, users will only be able to set
-; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
-;
-; Note:  If this directive is empty, PHP will let the user modify ANY
-; environment variable!
-safe_mode_allowed_env_vars = PHP_
-
-; This directive contains a comma-delimited list of environment variables that
-; the end user won't be able to change using putenv().  These variables will be
-; protected even if safe_mode_allowed_env_vars is set to allow to change them.
-safe_mode_protected_env_vars = LD_LIBRARY_PATH
-
-; open_basedir, if set, limits all file operations to the defined directory
-; and below.  This directive makes most sense if used in a per-directory
-; or per-virtualhost web server configuration file. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-;open_basedir =
-
-; This directive allows you to disable certain functions for security reasons.
-; It receives a comma-delimited list of function names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_functions =
-
-; This directive allows you to disable certain classes for security reasons.
-; It receives a comma-delimited list of class names. This directive is
-; *NOT* affected by whether Safe Mode is turned On or Off.
-disable_classes =
-
-; Colors for Syntax Highlighting mode.  Anything that's acceptable in
-; <font color="??????"> would work.
-;highlight.string  = #DD0000
-;highlight.comment = #FF9900
-;highlight.keyword = #007700
-;highlight.bg      = #FFFFFF
-;highlight.default = #0000BB
-;highlight.html    = #000000
-
-
-;
-; Misc
-;
-; Decides whether PHP may expose the fact that it is installed on the server
-; (e.g. by adding its signature to the Web server header).  It is no security
-; threat in any way, but it makes it possible to determine whether you use PHP
-; on your server or not.
-expose_php = On
-
-
-;;;;;;;;;;;;;;;;;;;
-; Resource Limits ;
-;;;;;;;;;;;;;;;;;;;
-
-max_execution_time = 30     ; Maximum execution time of each script, in seconds
-max_input_time = 60	; Maximum amount of time each script may spend parsing request data
-memory_limit = 8M      ; Maximum amount of memory a script may consume (8MB)
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-; Error handling and logging ;
-;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; error_reporting is a bit-field.  Or each number up to get desired error
-; reporting level
-; E_ALL             - All errors and warnings
-; E_ERROR           - fatal run-time errors
-; E_WARNING         - run-time warnings (non-fatal errors)
-; E_PARSE           - compile-time parse errors
-; E_NOTICE          - run-time notices (these are warnings which often result
-;                     from a bug in your code, but it's possible that it was
-;                     intentional (e.g., using an uninitialized variable and
-;                     relying on the fact it's automatically initialized to an
-;                     empty string)
-; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
-; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
-;                     initial startup
-; E_COMPILE_ERROR   - fatal compile-time errors
-; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
-; E_USER_ERROR      - user-generated error message
-; E_USER_WARNING    - user-generated warning message
-; E_USER_NOTICE     - user-generated notice message
-;
-; Examples:
-;
-;   - Show all errors, except for notices
-;
-;error_reporting = E_ALL & ~E_NOTICE
-;
-;   - Show only errors
-;
-;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
-;
-;   - Show all errors
-;
-error_reporting  =  E_ALL
-
-; Print out errors (as a part of the output).  For production web sites,
-; you're strongly encouraged to turn this feature off, and use error logging
-; instead (see below).  Keeping display_errors enabled on a production web site
-; may reveal security information to end users, such as file paths on your Web
-; server, your database schema or other information.
-display_errors = Off
-
-; Even when display_errors is on, errors that occur during PHP's startup
-; sequence are not displayed.  It's strongly recommended to keep
-; display_startup_errors off, except for when debugging.
-display_startup_errors = Off
-
-; Log errors into a log file (server-specific log, stderr, or error_log (below))
-; As stated above, you're strongly advised to use error logging in place of
-; error displaying on production web sites.
-log_errors = On
-
-; Set maximum length of log_errors. In error_log information about the source is
-; added. The default is 1024 and 0 allows to not apply any maximum length at all.
-log_errors_max_len = 1024
-
-; Do not log repeated messages. Repeated errors must occur in same file on same
-; line until ignore_repeated_source is set true.
-ignore_repeated_errors = Off
-
-; Ignore source of message when ignoring repeated messages. When this setting 
-; is On you will not log errors with repeated messages from different files or
-; sourcelines.
-ignore_repeated_source = Off
-
-; If this parameter is set to Off, then memory leaks will not be shown (on
-; stdout or in the log). This has only effect in a debug compile, and if 
-; error reporting includes E_WARNING in the allowed list
-report_memleaks = On
-
-; Store the last error/warning message in $php_errormsg (boolean).
-track_errors = Off
-
-; Disable the inclusion of HTML tags in error messages.
-;html_errors = Off
-
-; If html_errors is set On PHP produces clickable error messages that direct 
-; to a page describing the error or function causing the error in detail.
-; You can download a copy of the PHP manual from http://www.php.net/docs.php 
-; and change docref_root to the base URL of your local copy including the
-; leading '/'. You must also specify the file extension being used including 
-; the dot.
-;docref_root = "/phpmanual/"
-;docref_ext = .html
-  
-; String to output before an error message.
-;error_prepend_string = "<font color=ff0000>"
-
-; String to output after an error message.
-;error_append_string = "</font>"
-
-; Log errors to specified file.
-;error_log = filename
-
-; Log errors to syslog (Event Log on NT, not valid in Windows 95).
-;error_log = syslog
-
-
-;;;;;;;;;;;;;;;;;
-; Data Handling ;
-;;;;;;;;;;;;;;;;;
-;
-; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
-
-; The separator used in PHP generated URLs to separate arguments.
-; Default is "&". 
-;arg_separator.output = "&amp;"
-
-; List of separator(s) used by PHP to parse input URLs into variables.
-; Default is "&". 
-; NOTE: Every character in this directive is considered as separator!
-;arg_separator.input = ";&"
-
-; This directive describes the order in which PHP registers GET, POST, Cookie,
-; Environment and Built-in variables (G, P, C, E & S respectively, often
-; referred to as EGPCS or GPC).  Registration is done from left to right, newer
-; values override older values.
-variables_order = "GPCS"
-
-; Whether or not to register the EGPCS variables as global variables.  You may
-; want to turn this off if you don't want to clutter your scripts' global scope
-; with user data.  This makes most sense when coupled with track_vars - in which
-; case you can access all of the GPC variables through the $HTTP_*_VARS[],
-; variables.
-;
-; You should do your best to write your scripts so that they do not require
-; register_globals to be on;  Using form variables as globals can easily lead
-; to possible security problems, if the code is not very well thought of.
-register_globals = Off
-
-; This directive tells PHP whether to declare the argv&argc variables (that
-; would contain the GET information).  If you don't use these variables, you
-; should turn it off for increased performance.
-register_argc_argv = Off
-
-; Maximum size of POST data that PHP will accept.
-post_max_size = 8M
-
-; This directive is deprecated.  Use variables_order instead.
-gpc_order = "GPC"
-
-; Magic quotes
-;
-
-; Magic quotes for incoming GET/POST/Cookie data.
-magic_quotes_gpc = Off
-
-; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
-magic_quotes_runtime = Off    
-
-; Use Sybase-style magic quotes (escape ' with '' instead of \').
-magic_quotes_sybase = Off
-
-; Automatically add files before or after any PHP document.
-auto_prepend_file =
-auto_append_file =
-
-; As of 4.0b4, PHP always outputs a character encoding by default in
-; the Content-type: header.  To disable sending of the charset, simply
-; set it to be empty.
-;
-; PHP's built-in default is text/html
-default_mimetype = "text/html"
-;default_charset = "iso-8859-1"
-
-; Always populate the $HTTP_RAW_POST_DATA variable.                               
-;always_populate_raw_post_data = On
-
-
-;;;;;;;;;;;;;;;;;;;;;;;;;
-; Paths and Directories ;
-;;;;;;;;;;;;;;;;;;;;;;;;;
-
-; UNIX: "/path1:/path2"  
-;include_path = ".:/php/includes"
-;
-; Windows: "\path1;\path2"
-;include_path = ".;c:\php\includes"
-
-; The root of the PHP pages, used only if nonempty.
-; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
-; if you are running php as a CGI under any web server (other than IIS)
-; see documentation for security issues.  The alternate is to use the
-; cgi.force_redirect configuration below
-doc_root =
-
-; The directory under which PHP opens the script using /~usernamem used only
-; if nonempty.
-user_dir =
-
-; Directory in which the loadable extensions (modules) reside.
-; extension_dir = "./"
-extension_dir = "/usr/lib/php/extensions/"
-
-; Whether or not to enable the dl() function.  The dl() function does NOT work
-; properly in multithreaded servers, such as IIS or Zeus, and is automatically
-; disabled on them.
-enable_dl = On
-
-; cgi.force_redirect is necessary to provide security running PHP as a CGI under
-; most web servers.  Left undefined, PHP turns this on by default.  You can
-; turn it off here AT YOUR OWN RISK
-; **You CAN safely turn this off for IIS, in fact, you MUST.**
-; cgi.force_redirect = 1
-
-; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
-; every request.
-; cgi.nph = 1
-
-; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape 
-; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
-; will look for to know it is OK to continue execution.  Setting this variable MAY
-; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
-; cgi.redirect_status_env = ;
-
-; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
-; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
-; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
-; this to 1 will cause PHP CGI to fix it's paths to conform to the spec.  A setting
-; of zero causes PHP to behave as before.  Default is zero.  You should fix your scripts
-; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
-; cgi.fix_pathinfo=1
-
-; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
-; security tokens of the calling client.  This allows IIS to define the
-; security context that the request runs under.  mod_fastcgi under Apache
-; does not currently support this feature (03/17/2002)
-; Set to 1 if running under IIS.  Default is zero.
-; fastcgi.impersonate = 1;
-
-; Disable logging through FastCGI connection
-; fastcgi.log = 0
-
-; cgi.rfc2616_headers configuration option tells PHP what type of headers to
-; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
-; is supported by Apache. When this option is set to 1 PHP will send
-; RFC2616 compliant header.
-; Default is zero.
-;cgi.rfc2616_headers = 0 
-
-
-;;;;;;;;;;;;;;;;
-; File Uploads ;
-;;;;;;;;;;;;;;;;
-
-; Whether to allow HTTP file uploads.
-file_uploads = On
-
-; Temporary directory for HTTP uploaded files (will use system default if not
-; specified).
-;upload_tmp_dir =
-
-; Maximum allowed size for uploaded files.
-upload_max_filesize = 10M
-
-
-;;;;;;;;;;;;;;;;;;
-; Fopen wrappers ;
-;;;;;;;;;;;;;;;;;;
-
-; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
-allow_url_fopen = On
-
-; Define the anonymous ftp password (your email address)
-;from="john@doe.com"
-
-; Define the user agent for php to send
-;user_agent="PHP"
-
-; Default timeout for socket based streams (seconds)
-default_socket_timeout = 60
-
-; If your scripts have to deal with files from Macintosh systems,
-; or you are running on a Mac and need to deal with files from
-; unix or win32 systems, setting this flag will cause PHP to
-; automatically detect the EOL character in those files so that
-; fgets() and file() will work regardless of the source of the file.
-; auto_detect_line_endings = Off
-
-
-;;;;;;;;;;;;;;;;;;;;;;
-; Dynamic Extensions ;
-;;;;;;;;;;;;;;;;;;;;;;
-;
-; If you wish to have an extension loaded automatically, use the following
-; syntax:
-;
-;   extension=modulename.extension
-;
-; For example, on Windows:
-;
-;   extension=msql.dll
-;
-; ... or under UNIX:
-;
-;   extension=msql.so
-;
-; Note that it should be the name of the module only; no directory information 
-; needs to go here.  Specify the location of the extension with the
-; extension_dir directive above.
-;
-; Load the MySQL module by default.  Comment this out if you don't use MySQL.
-extension=mysql.so
-
-; Load the gettext extension by default.  Comment this out if you don't have the
-; gettext shared library installed.
-extension=gettext.so
-
-;Windows Extensions
-;Note that MySQL and ODBC support is now built in, so no dll is needed for it.
-;
-;extension=php_mbstring.dll
-;extension=php_bz2.dll
-;extension=php_cpdf.dll
-;extension=php_crack.dll
-;extension=php_curl.dll
-;extension=php_db.dll
-;extension=php_dba.dll
-;extension=php_dbase.dll
-;extension=php_dbx.dll
-;extension=php_domxml.dll
-;extension=php_exif.dll
-;extension=php_fdf.dll
-;extension=php_filepro.dll
-;extension=php_gd2.dll
-;extension=php_gettext.dll
-;extension=php_hyperwave.dll
-;extension=php_iconv.dll
-;extension=php_ifx.dll
-;extension=php_iisfunc.dll
-;extension=php_imap.dll
-;extension=php_interbase.dll
-;extension=php_java.dll
-;extension=php_ldap.dll
-;extension=php_mcrypt.dll
-;extension=php_mhash.dll
-;extension=php_mime_magic.dll
-;extension=php_ming.dll
-;extension=php_mssql.dll
-;extension=php_msql.dll
-;extension=php_oci8.dll
-;extension=php_openssl.dll
-;extension=php_oracle.dll
-;extension=php_pdf.dll
-;extension=php_pgsql.dll
-;extension=php_printer.dll
-;extension=php_shmop.dll
-;extension=php_snmp.dll
-;extension=php_sockets.dll
-;extension=php_sybase_ct.dll
-;extension=php_w32api.dll
-;extension=php_xmlrpc.dll
-;extension=php_xslt.dll
-;extension=php_yaz.dll
-;extension=php_zip.dll
-
-
-;;;;;;;;;;;;;;;;;;;
-; Module Settings ;
-;;;;;;;;;;;;;;;;;;;
-
-[Syslog]
-; Whether or not to define the various syslog variables (e.g. $LOG_PID,
-; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
-; runtime, you can define these variables by calling define_syslog_variables().
-define_syslog_variables  = Off
-
-[mail function]
-; For Win32 only.
-SMTP = localhost
-smtp_port = 25
-
-; For Win32 only.
-;sendmail_from = me@example.com
-
-; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
-;sendmail_path =
-
-[Java]
-;java.class.path = .\php_java.jar
-;java.home = c:\jdk
-;java.library = c:\jdk\jre\bin\hotspot\jvm.dll 
-;java.library.path = .\
-
-[SQL]
-sql.safe_mode = Off
-
-[ODBC]
-;odbc.default_db    =  Not yet implemented
-;odbc.default_user  =  Not yet implemented
-;odbc.default_pw    =  Not yet implemented
-
-; Allow or prevent persistent links.
-odbc.allow_persistent = On
-
-; Check that a connection is still valid before reuse.
-odbc.check_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-odbc.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-odbc.max_links = -1  
-
-; Handling of LONG fields.  Returns number of bytes to variables.  0 means
-; passthru.
-odbc.defaultlrl = 4096  
-
-; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
-; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
-; of uodbc.defaultlrl and uodbc.defaultbinmode
-odbc.defaultbinmode = 1  
-
-[MySQL]
-; Allow or prevent persistent links.
-mysql.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-mysql.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-mysql.max_links = -1
-
-; Default port number for mysql_connect().  If unset, mysql_connect() will use
-; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
-; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
-; at MYSQL_PORT.
-mysql.default_port =
-
-; Default socket name for local MySQL connects.  If empty, uses the built-in
-; MySQL defaults.
-mysql.default_socket =
-
-; Default host for mysql_connect() (doesn't apply in safe mode).
-mysql.default_host =
-
-; Default user for mysql_connect() (doesn't apply in safe mode).
-mysql.default_user =
-
-; Default password for mysql_connect() (doesn't apply in safe mode).
-; Note that this is generally a *bad* idea to store passwords in this file.
-; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
-; and reveal this password!  And of course, any users with read access to this
-; file will be able to reveal the password as well.
-mysql.default_password =
-
-; Maximum time (in seconds) for connect timeout. -1 means no limit
-mysql.connect_timeout = 60
-
-; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
-; SQL-Errors will be displayed.
-mysql.trace_mode = Off
-
-[mSQL]
-; Allow or prevent persistent links.
-msql.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-msql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent).  -1 means no limit.
-msql.max_links = -1
-
-[PostgresSQL]
-; Allow or prevent persistent links.
-pgsql.allow_persistent = On
-
-; Detect broken persistent links always with pg_pconnect(). 
-; Auto reset feature requires a little overheads.
-pgsql.auto_reset_persistent = Off
-
-; Maximum number of persistent links.  -1 means no limit.
-pgsql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent).  -1 means no limit.
-pgsql.max_links = -1
-
-; Ignore PostgreSQL backends Notice message or not.
-; Notice message logging require a little overheads.
-pgsql.ignore_notice = 0
-
-; Log PostgreSQL backends Noitce message or not.
-; Unless pgsql.ignore_notice=0, module cannot log notice message.
-pgsql.log_notice = 0
-
-[Sybase]
-; Allow or prevent persistent links.
-sybase.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-sybase.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-sybase.max_links = -1
-
-;sybase.interface_file = "/usr/sybase/interfaces"
-
-; Minimum error severity to display.
-sybase.min_error_severity = 10
-
-; Minimum message severity to display.
-sybase.min_message_severity = 10
-
-; Compatability mode with old versions of PHP 3.0.
-; If on, this will cause PHP to automatically assign types to results according
-; to their Sybase type, instead of treating them all as strings.  This
-; compatibility mode will probably not stay around forever, so try applying
-; whatever necessary changes to your code, and turn it off.
-sybase.compatability_mode = Off
-
-[Sybase-CT]
-; Allow or prevent persistent links.
-sybct.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-sybct.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-sybct.max_links = -1
-
-; Minimum server message severity to display.
-sybct.min_server_severity = 10
-
-; Minimum client message severity to display.
-sybct.min_client_severity = 10
-
-[dbx]
-; returned column names can be converted for compatibility reasons
-; possible values for dbx.colnames_case are
-; "unchanged" (default, if not set)
-; "lowercase"
-; "uppercase"
-; the recommended default is either upper- or lowercase, but
-; unchanged is currently set for backwards compatibility
-dbx.colnames_case = "lowercase"
-
-[bcmath]
-; Number of decimal digits for all bcmath functions.
-bcmath.scale = 0
-
-[browscap]
-;browscap = extra/browscap.ini
-
-[Informix]
-; Default host for ifx_connect() (doesn't apply in safe mode).
-ifx.default_host =
-
-; Default user for ifx_connect() (doesn't apply in safe mode).
-ifx.default_user =
-
-; Default password for ifx_connect() (doesn't apply in safe mode).
-ifx.default_password =
-
-; Allow or prevent persistent links.
-ifx.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-ifx.max_persistent = -1
-
-; Maximum number of links (persistent + non-persistent).  -1 means no limit.
-ifx.max_links = -1
-
-; If on, select statements return the contents of a text blob instead of its id.
-ifx.textasvarchar = 0
-
-; If on, select statements return the contents of a byte blob instead of its id.
-ifx.byteasvarchar = 0
-
-; Trailing blanks are stripped from fixed-length char columns.  May help the
-; life of Informix SE users.
-ifx.charasvarchar = 0
-
-; If on, the contents of text and byte blobs are dumped to a file instead of
-; keeping them in memory.
-ifx.blobinfile = 0
-
-; NULL's are returned as empty strings, unless this is set to 1.  In that case,
-; NULL's are returned as string 'NULL'.
-ifx.nullformat = 0
-
-[Session]
-; Handler used to store/retrieve data.
-session.save_handler = files
-
-; Argument passed to save_handler.  In the case of files, this is the path
-; where data files are stored. Note: Windows users have to change this 
-; variable in order to use PHP's session functions.
-;session.save_path = /tmp
-
-; Whether to use cookies.
-session.use_cookies = 1
-
-; This option enables administrators to make their users invulnerable to 
-; attacks which involve passing session ids in URLs; defaults to 0.
-; session.use_only_cookies = 1
-
-; Name of the session (used as cookie name).
-session.name = PHPSESSID
-
-; Initialize session on request startup.
-session.auto_start = 0
-
-; Lifetime in seconds of cookie or, if 0, until browser is restarted.
-session.cookie_lifetime = 0
-
-; The path for which the cookie is valid.
-session.cookie_path = /
-
-; The domain for which the cookie is valid.
-session.cookie_domain =
-
-; Handler used to serialize data.  php is the standard serializer of PHP.
-session.serialize_handler = php
-
-; Define the probability that the 'garbage collection' process is started
-; on every session initialization.
-; The probability is calculated by using gc_probability/gc_divisor,
-; e.g. 1/100 means there is a 1% chance that the GC process starts
-; on each request.
-
-session.gc_probability = 1
-session.gc_divisor     = 1000
-
-; After this number of seconds, stored data will be seen as 'garbage' and
-; cleaned up by the garbage collection process.
-session.gc_maxlifetime = 1440
-
-; PHP 4.2 and less have an undocumented feature/bug that allows you to
-; to initialize a session variable in the global scope, albeit register_globals
-; is disabled.  PHP 4.3 and later will warn you, if this feature is used.
-; You can disable the feature and the warning separately. At this time,
-; the warning is only displayed, if bug_compat_42 is enabled.
-
-session.bug_compat_42 = 0
-session.bug_compat_warn = 1
-
-; Check HTTP Referer to invalidate externally stored URLs containing ids.
-; HTTP_REFERER has to contain this substring for the session to be
-; considered as valid.
-session.referer_check =
-
-; How many bytes to read from the file.
-session.entropy_length = 0
-
-; Specified here to create the session id.
-session.entropy_file =
-
-;session.entropy_length = 16
-
-;session.entropy_file = /dev/urandom
-
-; Set to {nocache,private,public,} to determine HTTP caching aspects.
-; or leave this empty to avoid sending anti-caching headers.
-session.cache_limiter = nocache
-
-; Document expires after n minutes.
-session.cache_expire = 180
-
-; trans sid support is disabled by default.
-; Use of trans sid may risk your users security.
-; Use this option with caution.
-; - User may send URL contains active session ID
-;   to other person via. email/irc/etc.
-; - URL that contains active session ID may be stored
-;   in publically accessible computer. 
-; - User may access your site with the same session ID
-;   always using URL stored in browser's history or bookmarks.
-session.use_trans_sid = 0
-
-; The URL rewriter will look for URLs in a defined set of HTML tags.
-; form/fieldset are special; if you include them here, the rewriter will
-; add a hidden <input> field with the info which is otherwise appended
-; to URLs.  If you want XHTML conformity, remove the form entry.
-; Note that all valid entries require a "=", even if no value follows.
-url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
-
-[MSSQL]
-; Allow or prevent persistent links.
-mssql.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-mssql.max_persistent = -1
-
-; Maximum number of links (persistent+non persistent).  -1 means no limit.
-mssql.max_links = -1
-
-; Minimum error severity to display.
-mssql.min_error_severity = 10
-
-; Minimum message severity to display.
-mssql.min_message_severity = 10
-
-; Compatability mode with old versions of PHP 3.0.
-mssql.compatability_mode = Off
-
-; Connect timeout
-;mssql.connect_timeout = 5
-
-; Query timeout
-;mssql.timeout = 60
-
-; Valid range 0 - 2147483647.  Default = 4096.
-;mssql.textlimit = 4096
-
-; Valid range 0 - 2147483647.  Default = 4096.
-;mssql.textsize = 4096
-
-; Limits the number of records in each batch.  0 = all records in one batch.
-;mssql.batchsize = 0
-
-; Specify how datetime and datetim4 columns are returned
-; On => Returns data converted to SQL server settings
-; Off => Returns values as YYYY-MM-DD hh:mm:ss
-;mssql.datetimeconvert = On
-
-; Use NT authentication when connecting to the server
-mssql.secure_connection = Off
-
-; Specify max number of processes. Default = 25
-;mssql.max_procs = 25
-
-[Assertion]
-; Assert(expr); active by default.
-;assert.active = On
-
-; Issue a PHP warning for each failed assertion.
-;assert.warning = On
-
-; Don't bail out by default.
-;assert.bail = Off
-
-; User-function to be called if an assertion fails.
-;assert.callback = 0
-
-; Eval the expression with current error_reporting().  Set to true if you want
-; error_reporting(0) around the eval().
-;assert.quiet_eval = 0
-
-[Ingres II]
-; Allow or prevent persistent links.
-ingres.allow_persistent = On
-
-; Maximum number of persistent links.  -1 means no limit.
-ingres.max_persistent = -1
-
-; Maximum number of links, including persistents.  -1 means no limit.
-ingres.max_links = -1
-
-; Default database (format: [node_id::]dbname[/srv_class]).
-ingres.default_database =
-
-; Default user.
-ingres.default_user =
-
-; Default password.
-ingres.default_password =
-
-[Verisign Payflow Pro]
-; Default Payflow Pro server.
-pfpro.defaulthost = "test-payflow.verisign.com"
-
-; Default port to connect to.
-pfpro.defaultport = 443
-
-; Default timeout in seconds.
-pfpro.defaulttimeout = 30
-
-; Default proxy IP address (if required).
-;pfpro.proxyaddress =
-
-; Default proxy port.
-;pfpro.proxyport =
-
-; Default proxy logon.
-;pfpro.proxylogon =
-
-; Default proxy password.
-;pfpro.proxypassword =
-
-[com]
-; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
-;com.typelib_file = 
-; allow Distributed-COM calls
-;com.allow_dcom = true
-; autoregister constants of a components typlib on com_load()
-;com.autoregister_typelib = true
-; register constants casesensitive
-;com.autoregister_casesensitive = false
-; show warnings on duplicate constat registrations
-;com.autoregister_verbose = true
-
-[Printer]
-;printer.default_printer = ""
-
-[mbstring]
-; language for internal character representation.
-;mbstring.language = Japanese
-
-; internal/script encoding.
-; Some encoding cannot work as internal encoding.
-; (e.g. SJIS, BIG5, ISO-2022-*)
-;mbstring.internal_encoding = EUC-JP
-
-; http input encoding.
-;mbstring.http_input = auto
-
-; http output encoding. mb_output_handler must be
-; registered as output buffer to function
-;mbstring.http_output = SJIS
-
-; enable automatic encoding translation accoding to 
-; mbstring.internal_encoding setting. Input chars are
-; converted to internal encoding by setting this to On.
-; Note: Do _not_ use automatic encoding translation for
-;       portable libs/applications.
-;mbstring.encoding_translation = Off
-
-; automatic encoding detection order.
-; auto means 
-;mbstring.detect_order = auto
-
-; substitute_character used when character cannot be converted
-; one from another
-;mbstring.substitute_character = none;
-
-; overload(replace) single byte functions by mbstring functions.
-; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
-; etc. Possible values are 0,1,2,4 or combination of them.
-; For example, 7 for overload everything.
-; 0: No overload
-; 1: Overload mail() function
-; 2: Overload str*() functions
-; 4: Overload ereg*() functions
-;mbstring.func_overload = 0
-
-[FrontBase]
-;fbsql.allow_persistent = On
-;fbsql.autocommit = On
-;fbsql.default_database = 
-;fbsql.default_database_password =
-;fbsql.default_host =
-;fbsql.default_password =
-;fbsql.default_user = "_SYSTEM"
-;fbsql.generate_warnings = Off
-;fbsql.max_connections = 128
-;fbsql.max_links = 128
-;fbsql.max_persistent = -1
-;fbsql.max_results = 128
-;fbsql.batchSize = 1000
-
-[Crack]
-; Modify the setting below to match the directory location of the cracklib
-; dictionary files.  Include the base filename, but not the file extension.
-; crack.default_dictionary = "c:\php\lib\cracklib_dict"
-
-[exif]
-; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. 
-; With mbstring support this will automatically be converted into the encoding
-; given by corresponding encode setting. When empty mbstring.internal_encoding 
-; is used. For the decode settings you can distinguish between motorola and 
-; intel byte order. A decode setting cannot be empty.
-;exif.encode_unicode = ISO-8859-15
-;exif.decode_unicode_motorola = UCS-2BE
-;exif.decode_unicode_intel    = UCS-2LE
-;exif.encode_jis = 
-;exif.decode_jis_motorola = JIS
-;exif.decode_jis_intel    = JIS
-
-; Local Variables:
-; tab-width: 4
-; End:
diff --git a/trunk/templates/vserver/vserver.d/etc/apache/vhosts b/trunk/templates/vserver/vserver.d/etc/apache/vhosts
deleted file mode 100644
index e69de29..0000000
--- a/trunk/templates/vserver/vserver.d/etc/apache/vhosts
+++ /dev/null