initial import

git-svn-id: svn+slack://slack.fluxo.info/var/svn/simplepkg@1 04377dda-e619-0410-9926-eae83683ac58

3 files changed, 2168 insertions, 0 deletions

diff --git a/templates/vserver-legacy.d/etc/apache/httpd.conf b/templates/vserver-legacy.d/etc/apache/httpd.conf
new file mode 100644
index 0000000..7b7115d
--- /dev/null
+++ b/templates/vserver-legacy.d/etc/apache/httpd.conf
@@ -0,0 +1,1046 @@
+##
+## httpd.conf -- Apache HTTP server configuration file
+##
+
+#
+# Based upon the NCSA server configuration files originally by Rob McCool.
+#
+# This is the main Apache server configuration file.  It contains the
+# configuration directives that give the server its instructions.
+# See <URL:http://httpd.apache.org/docs/> for detailed information about
+# the directives.
+#
+# Do NOT simply read the instructions in here without understanding
+# what they do.  They're here only as hints or reminders.  If you are unsure
+# consult the online docs. You have been warned.  
+#
+# After this file is processed, the server will look for and process
+# /etc/apache/srm.conf and then /etc/apache/access.conf
+# unless you have overridden these with ResourceConfig and/or
+# AccessConfig directives here.
+#
+# The configuration directives are grouped into three basic sections:
+#  1. Directives that control the operation of the Apache server process as a
+#     whole (the 'global environment').
+#  2. Directives that define the parameters of the 'main' or 'default' server,
+#     which responds to requests that aren't handled by a virtual host.
+#     These directives also provide default values for the settings
+#     of all virtual hosts.
+#  3. Settings for virtual hosts, which allow Web requests to be sent to
+#     different IP addresses or hostnames and have them handled by the
+#     same Apache server process.
+#
+# Configuration and logfile names: If the filenames you specify for many
+# of the server's control files begin with "/" (or "drive:/" for Win32), the
+# server will use that explicit path.  If the filenames do *not* begin
+# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
+# with ServerRoot set to "/usr/local/apache" will be interpreted by the
+# server as "/usr/local/apache/logs/foo.log".
+#
+
+### Section 1: Global Environment
+#
+# The directives in this section affect the overall operation of Apache,
+# such as the number of concurrent requests it can handle or where it
+# can find its configuration files.
+#
+
+#
+# ServerType is either inetd, or standalone.  Inetd mode is only supported on
+# Unix platforms.
+#
+ServerType standalone
+
+# ServerTokens directive
+ServerTokens ProductOnly
+
+#
+# ServerRoot: The top of the directory tree under which the server's
+# configuration, error, and log files are kept.
+#
+# NOTE!  If you intend to place this on an NFS (or otherwise network)
+# mounted filesystem then please read the LockFile documentation
+# (available at <URL:http://www.apache.org/docs/mod/core.html#lockfile>);
+# you will save yourself a lot of trouble.
+#
+ServerRoot "/usr"
+
+#
+# The LockFile directive sets the path to the lockfile used when Apache
+# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or
+# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at
+# its default value. The main reason for changing it is if the logs
+# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL
+# DISK. The PID of the main server process is automatically appended to
+# the filename. 
+#
+#LockFile /var/run/httpd.lock
+
+#
+# PidFile: The file in which the server should record its process
+# identification number when it starts.
+#
+PidFile /var/run/httpd.pid
+
+#
+# ScoreBoardFile: File used to store internal server process information.
+# Not all architectures require this.  But if yours does (you'll know because
+# this file will be  created when you run Apache) then you *must* ensure that
+# no two invocations of Apache share the same scoreboard file.
+#
+ScoreBoardFile /var/run/httpd.scoreboard
+
+#
+# In the standard configuration, the server will process httpd.conf (this 
+# file, specified by the -f command line option), srm.conf, and access.conf 
+# in that order.  The latter two files are now distributed empty, as it is 
+# recommended that all directives be kept in a single file for simplicity.  
+# The commented-out values below are the built-in defaults.  You can have the 
+# server ignore these files altogether by using "/dev/null" (for Unix) or
+# "nul" (for Win32) for the arguments to the directives.
+#
+#ResourceConfig /etc/apache/srm.conf
+#AccessConfig /etc/apache/access.conf
+
+#
+# Timeout: The number of seconds before receives and sends time out.
+#
+Timeout 300
+
+#
+# KeepAlive: Whether or not to allow persistent connections (more than
+# one request per connection). Set to "Off" to deactivate.
+#
+KeepAlive On
+
+#
+# MaxKeepAliveRequests: The maximum number of requests to allow
+# during a persistent connection. Set to 0 to allow an unlimited amount.
+# We recommend you leave this number high, for maximum performance.
+#
+MaxKeepAliveRequests 100
+
+#
+# KeepAliveTimeout: Number of seconds to wait for the next request from the
+# same client on the same connection.
+#
+KeepAliveTimeout 2
+
+#
+# Server-pool size regulation.  Rather than making you guess how many
+# server processes you need, Apache dynamically adapts to the load it
+# sees --- that is, it tries to maintain enough server processes to
+# handle the current load, plus a few spare servers to handle transient
+# load spikes (e.g., multiple simultaneous requests from a single
+# Netscape browser).
+#
+# It does this by periodically checking how many servers are waiting
+# for a request.  If there are fewer than MinSpareServers, it creates
+# a new spare.  If there are more than MaxSpareServers, some of the
+# spares die off.  The default values are probably OK for most sites.
+#
+MinSpareServers 5
+MaxSpareServers 10
+
+#
+# Number of servers to start initially --- should be a reasonable ballpark
+# figure.
+#
+StartServers 5
+
+#
+# Limit on total number of servers running, i.e., limit on the number
+# of clients who can simultaneously connect --- if this limit is ever
+# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
+# It is intended mainly as a brake to keep a runaway server from taking
+# the system with it as it spirals down...
+#
+MaxClients 150
+
+#
+# MaxRequestsPerChild: the number of requests each child process is
+# allowed to process before the child dies.  The child will exit so
+# as to avoid problems after prolonged use when Apache (and maybe the
+# libraries it uses) leak memory or other resources.  On most systems, this
+# isn't really needed, but a few (such as Solaris) do have notable leaks
+# in the libraries. For these platforms, set to something like 10000
+# or so; a setting of 0 means unlimited.
+#
+# NOTE: This value does not include keepalive requests after the initial
+#       request per connection. For example, if a child process handles
+#       an initial request and 10 subsequent "keptalive" requests, it
+#       would only count as 1 request towards this limit.
+#
+MaxRequestsPerChild 0
+
+#
+# Listen: Allows you to bind Apache to specific IP addresses and/or
+# ports, instead of the default. See also the <VirtualHost>
+# directive.
+#
+#Listen 3000
+#Listen 12.34.56.78:80
+
+#
+# BindAddress: You can support virtual hosts with this option. This directive
+# is used to tell the server which IP address to listen to. It can either
+# contain "*", an IP address, or a fully qualified Internet domain name.
+# See also the <VirtualHost> and Listen directives.
+#
+#BindAddress *
+
+#
+# Dynamic Shared Object (DSO) Support
+#
+# To be able to use the functionality of a module which was built as a DSO you
+# have to place corresponding `LoadModule' lines at this location so the
+# directives contained in it are actually available _before_ they are used.
+# Please read the file http://httpd.apache.org/docs/dso.html for more
+# details about the DSO mechanism and run `httpd -l' for the list of already
+# built-in (statically linked and thus always available) modules in your httpd
+# binary.
+#
+# Note: The order in which modules are loaded is important.  Don't change
+# the order below without expert advice.
+#
+# Example:
+# LoadModule foo_module libexec/mod_foo.so
+LoadModule vhost_alias_module libexec/apache/mod_vhost_alias.so
+#LoadModule env_module         libexec/apache/mod_env.so
+LoadModule define_module      libexec/apache/mod_define.so
+LoadModule config_log_module  libexec/apache/mod_log_config.so
+LoadModule mime_magic_module  libexec/apache/mod_mime_magic.so
+LoadModule mime_module        libexec/apache/mod_mime.so
+LoadModule negotiation_module libexec/apache/mod_negotiation.so
+#LoadModule status_module      libexec/apache/mod_status.so
+#LoadModule info_module        libexec/apache/mod_info.so
+LoadModule includes_module    libexec/apache/mod_include.so
+LoadModule autoindex_module   libexec/apache/mod_autoindex.so
+LoadModule dir_module         libexec/apache/mod_dir.so
+LoadModule cgi_module         libexec/apache/mod_cgi.so
+#LoadModule asis_module        libexec/apache/mod_asis.so
+#LoadModule imap_module        libexec/apache/mod_imap.so
+#LoadModule action_module      libexec/apache/mod_actions.so
+#LoadModule speling_module     libexec/apache/mod_speling.so
+#LoadModule userdir_module     libexec/apache/mod_userdir.so
+LoadModule alias_module       libexec/apache/mod_alias.so
+LoadModule rewrite_module     libexec/apache/mod_rewrite.so
+LoadModule access_module      libexec/apache/mod_access.so
+LoadModule auth_module        libexec/apache/mod_auth.so
+LoadModule anon_auth_module   libexec/apache/mod_auth_anon.so
+#LoadModule dbm_auth_module    libexec/apache/mod_auth_dbm.so
+#LoadModule digest_module      libexec/apache/mod_digest.so
+LoadModule proxy_module       libexec/apache/libproxy.so
+LoadModule cern_meta_module   libexec/apache/mod_cern_meta.so
+LoadModule expires_module     libexec/apache/mod_expires.so
+LoadModule headers_module     libexec/apache/mod_headers.so
+#LoadModule usertrack_module   libexec/apache/mod_usertrack.so
+#LoadModule log_forensic_module libexec/apache/mod_log_forensic.so
+#LoadModule unique_id_module   libexec/apache/mod_unique_id.so
+LoadModule setenvif_module    libexec/apache/mod_setenvif.so
+
+#  Reconstruction of the complete module list from all available modules
+#  (static and shared ones) to achieve correct module execution order.
+#  [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO]
+ClearModuleList
+AddModule mod_vhost_alias.c
+#AddModule mod_env.c
+AddModule mod_define.c
+AddModule mod_log_config.c
+AddModule mod_mime_magic.c
+AddModule mod_mime.c
+AddModule mod_negotiation.c
+#AddModule mod_status.c
+#AddModule mod_info.c
+AddModule mod_include.c
+AddModule mod_autoindex.c
+AddModule mod_dir.c
+AddModule mod_cgi.c
+#AddModule mod_asis.c
+#AddModule mod_imap.c
+#AddModule mod_actions.c
+#AddModule mod_speling.c
+#AddModule mod_userdir.c
+AddModule mod_alias.c
+AddModule mod_rewrite.c
+AddModule mod_access.c
+AddModule mod_auth.c
+AddModule mod_auth_anon.c
+#AddModule mod_auth_dbm.c
+#AddModule mod_digest.c
+AddModule mod_proxy.c
+AddModule mod_cern_meta.c
+AddModule mod_expires.c
+AddModule mod_headers.c
+#AddModule mod_usertrack.c
+#AddModule mod_log_forensic.c
+#AddModule mod_unique_id.c
+AddModule mod_so.c
+AddModule mod_setenvif.c
+
+#
+# ExtendedStatus controls whether Apache will generate "full" status
+# information (ExtendedStatus On) or just basic information (ExtendedStatus
+# Off) when the "server-status" handler is called. The default is Off.
+#
+#ExtendedStatus On
+
+### Section 2: 'Main' server configuration
+#
+# The directives in this section set up the values used by the 'main'
+# server, which responds to any requests that aren't handled by a
+# <VirtualHost> definition.  These values also provide defaults for
+# any <VirtualHost> containers you may define later in the file.
+#
+# All of these directives may appear inside <VirtualHost> containers,
+# in which case these default settings will be overridden for the
+# virtual host being defined.
+#
+
+#
+# If your ServerType directive (set earlier in the 'Global Environment'
+# section) is set to "inetd", the next few directives don't have any
+# effect since their settings are defined by the inetd configuration.
+# Skip ahead to the ServerAdmin directive.
+#
+
+#
+# Port: The port to which the standalone server listens. For
+# ports < 1023, you will need httpd to be run as root initially.
+#
+Port 80
+
+#
+# If you wish httpd to run as a different user or group, you must run
+# httpd as root initially and it will switch.  
+#
+# User/Group: The name (or #number) of the user/group to run httpd as.
+#  . On SCO (ODT 3) use "User nouser" and "Group nogroup".
+#  . On HPUX you may not be able to use shared memory as nobody, and the
+#    suggested workaround is to create a user www and use that user.
+#  NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET)
+#  when the value of (unsigned)Group is above 60000; 
+#  don't use Group "#-1" on these systems!
+#
+User nobody
+Group nobody
+
+#
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed.  This address appears on some server-generated pages, such
+# as error documents.
+#
+ServerAdmin root@midas.slackware.lan
+
+#
+# ServerName allows you to set a host name which is sent back to clients for
+# your server if it's different than the one the program would get (i.e., use
+# "www" instead of the host's real name).
+#
+# Note: You cannot just invent host names and hope they work. The name you 
+# define here must be a valid DNS name for your host. If you don't understand
+# this, ask your network administrator.
+# If your host doesn't have a registered DNS name, enter its IP address here.
+# You will have to access it by its address (e.g., http://123.45.67.89/)
+# anyway, and this will make redirections work in a sensible way.
+#
+# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your 
+# machine always knows itself by this address. If you use Apache strictly for 
+# local testing and development, you may use 127.0.0.1 as the server name.
+#
+#ServerName www.example.com
+
+#
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+#
+DocumentRoot "/var/www/htdocs"
+
+#
+# Each directory to which Apache has access, can be configured with respect
+# to which services and features are allowed and/or disabled in that
+# directory (and its subdirectories). 
+#
+# First, we configure the "default" to be a very restrictive set of 
+# permissions.  
+#
+<Directory />
+    Options FollowSymLinks
+    AllowOverride None
+</Directory>
+
+#
+# Note that from this point forward you must specifically allow
+# particular features to be enabled - so if something's not working as
+# you might expect, make sure that you have specifically enabled it
+# below.
+#
+
+#
+# This should be changed to whatever you set DocumentRoot to.
+#
+<Directory "/var/www/htdocs">
+
+#
+# This may also be "None", "All", or any combination of "Indexes",
+# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
+#
+# Note that "MultiViews" must be named *explicitly* --- "Options All"
+# doesn't give it to you.
+#
+    Options Indexes FollowSymLinks MultiViews
+
+#
+# This controls which options the .htaccess files in directories can
+# override. Can also be "All", or any combination of "Options", "FileInfo", 
+# "AuthConfig", and "Limit"
+#
+    AllowOverride None
+
+#
+# Controls who can get stuff from this server.
+#
+    Order allow,deny
+    Allow from all
+</Directory>
+
+#
+# UserDir: The name of the directory which is appended onto a user's home
+# directory if a ~user request is received.
+#
+<IfModule mod_userdir.c>
+    UserDir public_html
+</IfModule>
+
+#
+# Control access to UserDir directories.  The following is an example
+# for a site where these directories are restricted to read-only.
+#
+#<Directory /home/*/public_html>
+#    AllowOverride FileInfo AuthConfig Limit
+#    Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
+#    <Limit GET POST OPTIONS PROPFIND>
+#        Order allow,deny
+#        Allow from all
+#    </Limit>
+#    <LimitExcept GET POST OPTIONS PROPFIND>
+#        Order deny,allow
+#        Deny from all
+#    </LimitExcept>
+#</Directory>
+
+#
+# DirectoryIndex: Name of the file or files to use as a pre-written HTML
+# directory index.  Separate multiple entries with spaces.
+#
+<IfModule mod_dir.c>
+    DirectoryIndex index.html
+</IfModule>
+
+#
+# AccessFileName: The name of the file to look for in each directory
+# for access control information.
+#
+AccessFileName .htaccess
+
+#
+# The following lines prevent .htaccess files from being viewed by
+# Web clients.  Since .htaccess files often contain authorization
+# information, access is disallowed for security reasons.  Comment
+# these lines out if you want Web visitors to see the contents of
+# .htaccess files.  If you change the AccessFileName directive above,
+# be sure to make the corresponding changes here.
+#
+# Also, folks tend to use names such as .htpasswd for password
+# files, so this will protect those as well.
+#
+<Files ~ "^\.ht">
+    Order allow,deny
+    Deny from all
+    Satisfy All
+</Files>
+
+#
+# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
+# document that was negotiated on the basis of content. This asks proxy
+# servers not to cache the document. Uncommenting the following line disables
+# this behavior, and proxies will be allowed to cache the documents.
+#
+#CacheNegotiatedDocs
+
+#
+# UseCanonicalName:  (new for 1.3)  With this setting turned on, whenever
+# Apache needs to construct a self-referencing URL (a URL that refers back
+# to the server the response is coming from) it will use ServerName and
+# Port to form a "canonical" name.  With this setting off, Apache will
+# use the hostname:port that the client supplied, when possible.  This
+# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
+#
+UseCanonicalName On
+
+#
+# TypesConfig describes where the mime.types file (or equivalent) is
+# to be found.
+#
+<IfModule mod_mime.c>
+    TypesConfig /etc/apache/mime.types
+</IfModule>
+
+#
+# DefaultType is the default MIME type the server will use for a document
+# if it cannot otherwise determine one, such as from filename extensions.
+# If your server contains mostly text or HTML documents, "text/plain" is
+# a good value.  If most of your content is binary, such as applications
+# or images, you may want to use "application/octet-stream" instead to
+# keep browsers from trying to display binary files as though they are
+# text.
+#
+DefaultType text/plain
+
+#
+# The mod_mime_magic module allows the server to use various hints from the
+# contents of the file itself to determine its type.  The MIMEMagicFile
+# directive tells the module where the hint definitions are located.
+# mod_mime_magic is not part of the default server (you have to add
+# it yourself with a LoadModule [see the DSO paragraph in the 'Global
+# Environment' section], or recompile the server and include mod_mime_magic
+# as part of the configuration), so it's enclosed in an <IfModule> container.
+# This means that the MIMEMagicFile directive will only be processed if the
+# module is part of the server.
+#
+<IfModule mod_mime_magic.c>
+    MIMEMagicFile /etc/apache/magic
+</IfModule>
+
+#
+# HostnameLookups: Log the names of clients or just their IP addresses
+# e.g., www.apache.org (on) or 204.62.129.132 (off).
+# The default is off because it'd be overall better for the net if people
+# had to knowingly turn this feature on, since enabling it means that
+# each client request will result in AT LEAST one lookup request to the
+# nameserver.
+#
+HostnameLookups Off
+
+#
+# ErrorLog: The location of the error log file.
+# If you do not specify an ErrorLog directive within a <VirtualHost>
+# container, error messages relating to that virtual host will be
+# logged here.  If you *do* define an error logfile for a <VirtualHost>
+# container, that host's errors will be logged there and not here.
+#
+ErrorLog "| /usr/bin/error-log.sh /var/log/apache/error_log"
+
+#
+# LogLevel: Control the number of messages logged to the error_log.
+# Possible values include: debug, info, notice, warn, error, crit,
+# alert, emerg.
+#
+LogLevel warn
+
+#
+# The following directives define some format nicknames for use with
+# a CustomLog directive (see below).
+#
+LogFormat "%l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
+LogFormat "%l %u %t \"%r\" %>s %b" common
+LogFormat "%{Referer}i -> %U" referer
+LogFormat "%{User-agent}i" agent
+
+#
+# The location and format of the access logfile (Common Logfile Format).
+# If you do not define any access logfiles within a <VirtualHost>
+# container, they will be logged here.  Contrariwise, if you *do*
+# define per-<VirtualHost> access logfiles, transactions will be
+# logged therein and *not* in this file.
+#
+CustomLog /var/log/apache/access_log common
+
+#
+# If you would like to have agent and referer logfiles, uncomment the
+# following directives.
+#
+#CustomLog /var/log/apache/referer_log referer
+#CustomLog /var/log/apache/agent_log agent
+
+#
+# If you prefer a single logfile with access, agent, and referer information
+# (Combined Logfile Format) you can use the following directive.
+#
+#CustomLog /var/log/apache/access_log combined
+
+#
+# Optionally add a line containing the server version and virtual host
+# name to server-generated pages (error documents, FTP directory listings,
+# mod_status and mod_info output etc., but not CGI generated documents).
+# Set to "EMail" to also include a mailto: link to the ServerAdmin.
+# Set to one of:  On | Off | EMail
+#
+ServerSignature Off
+
+# EBCDIC configuration:
+# (only for mainframes using the EBCDIC codeset, currently one of:
+# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!!
+# The following default configuration assumes that "text files"
+# are stored in EBCDIC (so that you can operate on them using the
+# normal POSIX tools like grep and sort) while "binary files" are
+# stored with identical octets as on an ASCII machine.
+#
+# The directives are evaluated in configuration file order, with
+# the EBCDICConvert directives applied before EBCDICConvertByType.
+#
+# If you want to have ASCII HTML documents and EBCDIC HTML documents
+# at the same time, you can use the file extension to force
+# conversion off for the ASCII documents:
+# > AddType       text/html .ahtml
+# > EBCDICConvert Off=InOut .ahtml
+#
+# EBCDICConvertByType  On=InOut text/* message/* multipart/*
+# EBCDICConvertByType  On=In    application/x-www-form-urlencoded
+# EBCDICConvertByType  On=InOut application/postscript model/vrml
+# EBCDICConvertByType Off=InOut */*
+
+
+#
+# Aliases: Add here as many aliases as you need (with no limit). The format is 
+# Alias fakename realname
+#
+<IfModule mod_alias.c>
+
+    #
+    # Note that if you include a trailing / on fakename then the server will
+    # require it to be present in the URL.  So "/icons" isn't aliased in this
+    # example, only "/icons/".  If the fakename is slash-terminated, then the 
+    # realname must also be slash terminated, and if the fakename omits the 
+    # trailing slash, the realname must also omit it.
+    #
+    Alias /icons/ "/var/www/icons/"
+
+    <Directory "/var/www/icons">
+        Options Indexes MultiViews
+        AllowOverride None
+        Order allow,deny
+        Allow from all
+    </Directory>
+
+    # This Alias will project the on-line documentation tree under /manual/
+    # even if you change the DocumentRoot. Comment it if you don't want to 
+    # provide access to the on-line documentation.
+    #
+    Alias /manual/ "/var/www/htdocs/manual/"
+
+    <Directory "/var/www/htdocs/manual">
+        Options Indexes FollowSymlinks MultiViews
+        AllowOverride None
+        Order allow,deny
+        Allow from all
+    </Directory>
+
+    #
+    # ScriptAlias: This controls which directories contain server scripts.
+    # ScriptAliases are essentially the same as Aliases, except that
+    # documents in the realname directory are treated as applications and
+    # run by the server when requested rather than as documents sent to the client.
+    # The same rules about trailing "/" apply to ScriptAlias directives as to
+    # Alias.
+    #
+    ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"
+
+    #
+    # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased
+    # CGI directory exists, if you have that configured.
+    #
+    <Directory "/var/www/cgi-bin">
+        AllowOverride None
+        Options None
+        Order allow,deny
+        Allow from all
+    </Directory>
+
+</IfModule>
+# End of aliases.
+
+#
+# Redirect allows you to tell clients about documents which used to exist in
+# your server's namespace, but do not anymore. This allows you to tell the
+# clients where to look for the relocated document.
+# Format: Redirect old-URI new-URL
+#
+
+#
+# Directives controlling the display of server-generated directory listings.
+#
+<IfModule mod_autoindex.c>
+
+    #
+    # FancyIndexing is whether you want fancy directory indexing or standard
+    #
+    IndexOptions FancyIndexing
+
+    #
+    # AddIcon* directives tell the server which icon to show for different
+    # files or filename extensions.  These are only displayed for
+    # FancyIndexed directories.
+    #
+    AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
+
+    AddIconByType (TXT,/icons/text.gif) text/*
+    AddIconByType (IMG,/icons/image2.gif) image/*
+    AddIconByType (SND,/icons/sound2.gif) audio/*
+    AddIconByType (VID,/icons/movie.gif) video/*
+
+    AddIcon /icons/binary.gif .bin .exe
+    AddIcon /icons/binhex.gif .hqx
+    AddIcon /icons/tar.gif .tar
+    AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
+    AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
+    AddIcon /icons/a.gif .ps .ai .eps
+    AddIcon /icons/layout.gif .html .shtml .htm .pdf
+    AddIcon /icons/text.gif .txt
+    AddIcon /icons/c.gif .c
+    AddIcon /icons/p.gif .pl .py
+    AddIcon /icons/f.gif .for
+    AddIcon /icons/dvi.gif .dvi
+    AddIcon /icons/uuencoded.gif .uu
+    AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
+    AddIcon /icons/tex.gif .tex
+    AddIcon /icons/bomb.gif core
+
+    AddIcon /icons/back.gif ..
+    AddIcon /icons/hand.right.gif README
+    AddIcon /icons/folder.gif ^^DIRECTORY^^
+    AddIcon /icons/blank.gif ^^BLANKICON^^
+
+    #
+    # DefaultIcon is which icon to show for files which do not have an icon
+    # explicitly set.
+    #
+    DefaultIcon /icons/unknown.gif
+
+    #
+    # AddDescription allows you to place a short description after a file in
+    # server-generated indexes.  These are only displayed for FancyIndexed
+    # directories.
+    # Format: AddDescription "description" filename
+    #
+    #AddDescription "GZIP compressed document" .gz
+    #AddDescription "tar archive" .tar
+    #AddDescription "GZIP compressed tar archive" .tgz
+
+    #
+    # ReadmeName is the name of the README file the server will look for by
+    # default, and append to directory listings.
+    #
+    # HeaderName is the name of a file which should be prepended to
+    # directory indexes. 
+    #
+    ReadmeName README.html
+    HeaderName HEADER.html
+
+    #
+    # IndexIgnore is a set of filenames which directory indexing should ignore
+    # and not include in the listing.  Shell-style wildcarding is permitted.
+    #
+    IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
+
+</IfModule>
+# End of indexing directives.
+
+#
+# Document types.
+#
+<IfModule mod_mime.c>
+
+    #
+    # AddLanguage allows you to specify the language of a document. You can
+    # then use content negotiation to give a browser a file in a language
+    # it can understand.  
+    #
+    # Note 1: The suffix does not have to be the same as the language 
+    # keyword --- those with documents in Polish (whose net-standard 
+    # language code is pl) may wish to use "AddLanguage pl .po" to 
+    # avoid the ambiguity with the common suffix for perl scripts.
+    #
+    # Note 2: The example entries below illustrate that in quite
+    # some cases the two character 'Language' abbreviation is not
+    # identical to the two character 'Country' code for its country,
+    # E.g. 'Danmark/dk' versus 'Danish/da'.
+    #
+    # Note 3: In the case of 'ltz' we violate the RFC by using a three char 
+    # specifier. But there is 'work in progress' to fix this and get 
+    # the reference data for rfc1766 cleaned up.
+    #
+    # Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
+    # French (fr) - German (de) - Greek-Modern (el)
+    # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn)
+    # Portugese (pt) - Luxembourgeois* (ltz)
+    # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs)
+    # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
+    # Russian (ru)
+    #
+    AddLanguage da .dk
+    AddLanguage nl .nl
+    AddLanguage en .en
+    AddLanguage et .ee
+    AddLanguage fr .fr
+    AddLanguage de .de
+    AddLanguage el .el
+    AddLanguage he .he
+    AddCharset ISO-8859-8 .iso8859-8
+    AddLanguage it .it
+    AddLanguage ja .ja
+    AddCharset ISO-2022-JP .jis
+    AddLanguage kr .kr
+    AddCharset ISO-2022-KR .iso-kr
+    AddLanguage nn .nn
+    AddLanguage no .no
+    AddLanguage pl .po
+    AddCharset ISO-8859-2 .iso-pl
+    AddLanguage pt .pt
+    AddLanguage pt-br .pt-br
+    AddLanguage ltz .lu
+    AddLanguage ca .ca
+    AddLanguage es .es
+    AddLanguage sv .sv
+    AddLanguage cs .cz .cs
+    AddLanguage ru .ru
+    AddLanguage zh-TW .zh-tw
+    AddCharset Big5         .Big5    .big5
+    AddCharset WINDOWS-1251 .cp-1251
+    AddCharset CP866        .cp866
+    AddCharset ISO-8859-5   .iso-ru
+    AddCharset KOI8-R       .koi8-r
+    AddCharset UCS-2        .ucs2
+    AddCharset UCS-4        .ucs4
+    AddCharset UTF-8        .utf8
+
+    # LanguagePriority allows you to give precedence to some languages
+    # in case of a tie during content negotiation.
+    #
+    # Just list the languages in decreasing order of preference. We have
+    # more or less alphabetized them here. You probably want to change this.
+    #
+    <IfModule mod_negotiation.c>
+        LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw
+    </IfModule>
+
+    #
+    # AddType allows you to tweak mime.types without actually editing it, or to
+    # make certain files to be certain types.
+    #
+    AddType application/x-tar .tgz
+
+    #
+    # AddEncoding allows you to have certain browsers uncompress
+    # information on the fly. Note: Not all browsers support this.
+    # Despite the name similarity, the following Add* directives have nothing
+    # to do with the FancyIndexing customization directives above.
+    #
+    AddEncoding x-compress .Z
+    AddEncoding x-gzip .gz .tgz
+    #
+    # If the AddEncoding directives above are commented-out, then you
+    # probably should define those extensions to indicate media types:
+    #
+    #AddType application/x-compress .Z
+    #AddType application/x-gzip .gz .tgz
+
+    #
+    # AddHandler allows you to map certain file extensions to "handlers",
+    # actions unrelated to filetype. These can be either built into the server
+    # or added with the Action command (see below)
+    #
+    # If you want to use server side includes, or CGI outside
+    # ScriptAliased directories, uncomment the following lines.
+    #
+    # To use CGI scripts:
+    #
+    #AddHandler cgi-script .cgi
+
+    #
+    # To use server-parsed HTML files
+    #
+    #AddType text/html .shtml
+    #AddHandler server-parsed .shtml
+
+    #
+    # Uncomment the following line to enable Apache's send-asis HTTP file
+    # feature
+    #
+    #AddHandler send-as-is asis
+
+    #
+    # If you wish to use server-parsed imagemap files, use
+    #
+    #AddHandler imap-file map
+
+    #
+    # To enable type maps, you might want to use
+    #
+    #AddHandler type-map var
+
+</IfModule>
+# End of document types.
+
+#
+# Action lets you define media types that will execute a script whenever
+# a matching file is called. This eliminates the need for repeated URL
+# pathnames for oft-used CGI file processors.
+# Format: Action media/type /cgi-script/location
+# Format: Action handler-name /cgi-script/location
+#
+
+#
+# MetaDir: specifies the name of the directory in which Apache can find
+# meta information files. These files contain additional HTTP headers
+# to include when sending the document
+#
+#MetaDir .web
+
+#
+# MetaSuffix: specifies the file name suffix for the file containing the
+# meta information.
+#
+#MetaSuffix .meta
+
+#
+# Customizable error response (Apache style)
+#  these come in three flavors
+#
+#    1) plain text
+ErrorDocument 500 /missing.html
+#  n.b.  the single leading (") marks it as text, it does not get output
+#
+#    2) local redirects
+ErrorDocument 404 /missing.html
+#  to redirect to local URL /missing.html
+#ErrorDocument 404 /cgi-bin/missing_handler.pl
+#  N.B.: You can redirect to a script or a document using server-side-includes.
+#
+#    3) external redirects
+ErrorDocument 402 /missing.html
+#  N.B.: Many of the environment variables associated with the original
+#  request will *not* be available to such a script.
+
+#
+# Customize behaviour based on the browser
+#
+<IfModule mod_setenvif.c>
+
+    #
+    # The following directives modify normal HTTP response behavior.
+    # The first directive disables keepalive for Netscape 2.x and browsers that
+    # spoof it. There are known problems with these browser implementations.
+    # The second directive is for Microsoft Internet Explorer 4.0b2
+    # which has a broken HTTP/1.1 implementation and does not properly
+    # support keepalive when it is used on 301 or 302 (redirect) responses.
+    #
+    BrowserMatch "Mozilla/2" nokeepalive
+    BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
+
+    #
+    # The following directive disables HTTP/1.1 responses to browsers which
+    # are in violation of the HTTP/1.0 spec by not being able to grok a
+    # basic 1.1 response.
+    #
+    BrowserMatch "RealPlayer 4\.0" force-response-1.0
+    BrowserMatch "Java/1\.0" force-response-1.0
+    BrowserMatch "JDK/1\.0" force-response-1.0
+
+</IfModule>
+# End of browser customization directives
+
+#
+# Allow server status reports, with the URL of http://servername/server-status
+# Change the ".example.com" to match your domain to enable.
+#
+#<Location /server-status>
+#    SetHandler server-status
+#    Order deny,allow
+#    Deny from all
+#    Allow from .example.com
+#</Location>
+
+#
+# Allow remote server configuration reports, with the URL of
+# http://servername/server-info (requires that mod_info.c be loaded).
+# Change the ".example.com" to match your domain to enable.
+#
+#<Location /server-info>
+#    SetHandler server-info
+#    Order deny,allow
+#    Deny from all
+#    Allow from .example.com
+#</Location>
+
+#
+# There have been reports of people trying to abuse an old bug from pre-1.1
+# days.  This bug involved a CGI script distributed as a part of Apache.
+# By uncommenting these lines you can redirect these attacks to a logging 
+# script on phf.apache.org.  Or, you can record them yourself, using the script
+# support/phf_abuse_log.cgi.
+#
+#<Location /cgi-bin/phf*>
+#    Deny from all
+#    ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
+#</Location>
+
+### Section 3: Virtual Hosts
+#
+# VirtualHost: If you want to maintain multiple domains/hostnames on your
+# machine you can setup VirtualHost containers for them. Most configurations
+# use only name-based virtual hosts so the server doesn't need to worry about
+# IP addresses. This is indicated by the asterisks in the directives below.
+#
+# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
+# for further details before you try to setup virtual hosts.
+#
+# You may use the command line option '-S' to verify your virtual host
+# configuration.
+
+#
+# Use name-based virtual hosting.
+#
+#NameVirtualHost *:80
+
+#
+# VirtualHost example:
+# Almost any Apache directive may go into a VirtualHost container.
+# The first VirtualHost section is used for requests without a known
+# server name.
+#
+#<VirtualHost *:80>
+#    ServerAdmin webmaster@dummy-host.example.com
+#    DocumentRoot /www/docs/dummy-host.example.com
+#    ServerName dummy-host.example.com
+#    ErrorLog logs/dummy-host.example.com-error_log
+#    CustomLog logs/dummy-host.example.com-access_log common
+#</VirtualHost>
+
+# By default, all external Apache modules are disabled.  To enable a particular
+# module for Apache, make sure the necessary packages are installed.  Then
+# uncomment the appropriate Include line below, save the file, and restart
+# Apache.  Note that some modules may need additional configuration steps.  For
+# example, mod_ssl requires a site certificate which you may need to generate.
+#
+# Lastly, if you remove a module package, be sure to edit this file and comment
+# out the appropriate Include line.
+
+# ==> mod_php configuration settings <==
+#
+# PACKAGES REQUIRED:  openssl-solibs (A series) and/or openssl (N series),
+#                     mysql (AP series), gmp (L series), mhash (L series),
+#                     and apache (N series)
+#
+#Include /etc/apache/mod_php.conf
+
+# ==> mod_ssl configuration settings <==
+#
+# PACKAGES REQUIRED:  apache (N series) and openssl (N series)
+#
+#Include /etc/apache/mod_ssl.conf
+
+#NameVirtualHost VSERVER_IP
+
+Include /etc/apache/vhosts
diff --git a/templates/vserver-legacy.d/etc/apache/php.ini b/templates/vserver-legacy.d/etc/apache/php.ini
new file mode 100644
index 0000000..e6cddef
--- /dev/null
+++ b/templates/vserver-legacy.d/etc/apache/php.ini
@@ -0,0 +1,1122 @@
+[PHP]
+
+;;;;;;;;;;;;;;;;;;;
+; About this file ;
+;;;;;;;;;;;;;;;;;;;
+;
+; This is the recommended, PHP 4-style version of the php.ini-dist file.  It
+; sets some non standard settings, that make PHP more efficient, more secure,
+; and encourage cleaner coding.
+; The price is that with these settings, PHP may be incompatible with some
+; applications, and sometimes, more difficult to develop with.  Using this
+; file is warmly recommended for production sites.  As all of the changes from
+; the standard settings are thoroughly documented, you can go over each one,
+; and decide whether you want to use it or not.
+;
+; For general information about the php.ini file, please consult the php.ini-dist
+; file, included in your PHP distribution.
+;
+; This file is different from the php.ini-dist file in the fact that it features
+; different values for several directives, in order to improve performance, while
+; possibly breaking compatibility with the standard out-of-the-box behavior of
+; PHP 3.  Please make sure you read what's different, and modify your scripts
+; accordingly, if you decide to use this file instead.
+;
+; - register_globals = Off         [Security, Performance]
+;     Global variables are no longer registered for input data (POST, GET, cookies,
+;     environment and other server variables).  Instead of using $foo, you must use
+;     you can use $_REQUEST["foo"] (includes any variable that arrives through the
+;     request, namely, POST, GET and cookie variables), or use one of the specific
+;     $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending
+;     on where the input originates.  Also, you can look at the
+;     import_request_variables() function.
+;     Note that register_globals is going to be depracated (i.e., turned off by
+;     default) in the next version of PHP, because it often leads to security bugs.
+;     Read http://php.net/manual/en/security.registerglobals.php for further
+;     information.
+; - display_errors = Off           [Security]
+;     With this directive set to off, errors that occur during the execution of
+;     scripts will no longer be displayed as a part of the script output, and thus,
+;     will no longer be exposed to remote users.  With some errors, the error message
+;     content may expose information about your script, web server, or database
+;     server that may be exploitable for hacking.  Production sites should have this
+;     directive set to off.
+; - log_errors = On                [Security]
+;     This directive complements the above one.  Any errors that occur during the
+;     execution of your script will be logged (typically, to your server's error log,
+;     but can be configured in several ways).  Along with setting display_errors to off,
+;     this setup gives you the ability to fully understand what may have gone wrong,
+;     without exposing any sensitive information to remote users.
+; - output_buffering = 4096        [Performance]
+;     Set a 4KB output buffer.  Enabling output buffering typically results in less
+;     writes, and sometimes less packets sent on the wire, which can often lead to
+;     better performance.  The gain this directive actually yields greatly depends
+;     on which Web server you're working with, and what kind of scripts you're using.
+; - register_argc_argv = Off       [Performance]
+;     Disables registration of the somewhat redundant $argv and $argc global
+;     variables.
+; - magic_quotes_gpc = Off         [Performance]
+;     Input data is no longer escaped with slashes so that it can be sent into
+;     SQL databases without further manipulation.  Instead, you should use the
+;     function addslashes() on each input element you wish to send to a database.
+; - variables_order = "GPCS"       [Performance]
+;     The environment variables are not hashed into the $HTTP_ENV_VARS[].  To access
+;     environment variables, you can use getenv() instead.
+; - error_reporting = E_ALL        [Code Cleanliness, Security(?)]
+;     By default, PHP surpresses errors of type E_NOTICE.  These error messages
+;     are emitted for non-critical errors, but that could be a symptom of a bigger
+;     problem.  Most notably, this will cause error messages about the use
+;     of uninitialized variables to be displayed.
+; - allow_call_time_pass_reference = Off     [Code cleanliness]
+;     It's not possible to decide to force a variable to be passed by reference
+;     when calling a function.  The PHP 4 style to do this is by making the
+;     function require the relevant argument by reference.
+
+
+;;;;;;;;;;;;;;;;;;;;
+; Language Options ;
+;;;;;;;;;;;;;;;;;;;;
+
+; Enable the PHP scripting language engine under Apache.
+engine = On
+
+; Allow the <? tag.  Otherwise, only <?php and <script> tags are recognized.  
+; NOTE: Using short tags should be avoided when developing applications or
+; libraries that are meant for redistribution, or deployment on PHP
+; servers which are not under your control, because short tags may not
+; be supported on the target server. For portable, redistributable code,
+; be sure not to use short tags.
+short_open_tag = On
+
+; Allow ASP-style <% %> tags.
+asp_tags = Off
+
+; The number of significant digits displayed in floating point numbers.
+precision    =  14
+
+; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
+y2k_compliance = On
+
+; Output buffering allows you to send header lines (including cookies) even
+; after you send body content, at the price of slowing PHP's output layer a
+; bit.  You can enable output buffering during runtime by calling the output
+; buffering functions.  You can also enable output buffering for all files by
+; setting this directive to On.  If you wish to limit the size of the buffer
+; to a certain size - you can use a maximum number of bytes instead of 'On', as
+; a value for this directive (e.g., output_buffering=4096).
+output_buffering = 4096
+
+; You can redirect all of the output of your scripts to a function.  For
+; example, if you set output_handler to "mb_output_handler", character
+; encoding will be transparently converted to the specified encoding.
+; Setting any output handler automatically turns on output buffering.
+; Note: People who wrote portable scripts should not depend on this ini
+;       directive. Instead, explicitly set the output handler using ob_start().
+;       Using this ini directive may cause problems unless you know what script 
+;       is doing.
+; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
+;       and you cannot use both "ob_gzhandler" and "zlib.output_compression". 
+;output_handler =
+
+; Transparent output compression using the zlib library
+; Valid values for this option are 'off', 'on', or a specific buffer size
+; to be used for compression (default is 4KB)
+; Note: Resulting chunk size may vary due to nature of compression. PHP 
+;       outputs chunks that are few handreds bytes each as a result of compression. 
+;       If you want larger chunk size for better performence, enable output_buffering 
+;       also. 
+; Note: output_handler must be empty if this is set 'On' !!!!
+;       Instead you must use zlib.output_handler.
+zlib.output_compression = Off
+
+; You cannot specify additional output handlers if zlib.output_compression
+; is activated here. This setting does the same as output_handler but in
+; a different order.
+;zlib.output_handler =
+
+; Implicit flush tells PHP to tell the output layer to flush itself
+; automatically after every output block.  This is equivalent to calling the
+; PHP function flush() after each and every call to print() or echo() and each
+; and every HTML block.  Turning this option on has serious performance
+; implications and is generally recommended for debugging purposes only.
+implicit_flush = Off
+
+; The unserialize callback function will be called (with the undefined class'
+; name as parameter), if the unserializer finds an undefined class
+; which should be instanciated.
+; A warning appears if the specified function is not defined, or if the
+; function doesn't include/implement the missing class.
+; So only set this entry, if you really want to implement such a 
+; callback-function.
+unserialize_callback_func=
+
+; When floats & doubles are serialized store serialize_precision significant
+; digits after the floating point. The default value ensures that when floats
+; are decoded with unserialize, the data will remain the same.
+serialize_precision = 100
+
+; Whether to enable the ability to force arguments to be passed by reference
+; at function call time.  This method is deprecated and is likely to be
+; unsupported in future versions of PHP/Zend.  The encouraged method of
+; specifying which arguments should be passed by reference is in the function
+; declaration.  You're encouraged to try and turn this option Off and make
+; sure your scripts work properly with it in order to ensure they will work
+; with future versions of the language (you will receive a warning each time
+; you use this feature, and the argument will be passed by value instead of by
+; reference).
+allow_call_time_pass_reference = Off
+
+;
+; Safe Mode
+;
+safe_mode = Off
+
+; By default, Safe Mode does a UID compare check when
+; opening files. If you want to relax this to a GID compare,
+; then turn on safe_mode_gid.
+safe_mode_gid = Off
+
+; When safe_mode is on, UID/GID checks are bypassed when
+; including files from this directory and its subdirectories.
+; (directory must also be in include_path or full path must
+; be used when including)
+safe_mode_include_dir =								
+
+; When safe_mode is on, only executables located in the safe_mode_exec_dir
+; will be allowed to be executed via the exec family of functions.
+safe_mode_exec_dir =
+
+; Setting certain environment variables may be a potential security breach.
+; This directive contains a comma-delimited list of prefixes.  In Safe Mode,
+; the user may only alter environment variables whose names begin with the
+; prefixes supplied here.  By default, users will only be able to set
+; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
+;
+; Note:  If this directive is empty, PHP will let the user modify ANY
+; environment variable!
+safe_mode_allowed_env_vars = PHP_
+
+; This directive contains a comma-delimited list of environment variables that
+; the end user won't be able to change using putenv().  These variables will be
+; protected even if safe_mode_allowed_env_vars is set to allow to change them.
+safe_mode_protected_env_vars = LD_LIBRARY_PATH
+
+; open_basedir, if set, limits all file operations to the defined directory
+; and below.  This directive makes most sense if used in a per-directory
+; or per-virtualhost web server configuration file. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+;open_basedir =
+
+; This directive allows you to disable certain functions for security reasons.
+; It receives a comma-delimited list of function names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+disable_functions =
+
+; This directive allows you to disable certain classes for security reasons.
+; It receives a comma-delimited list of class names. This directive is
+; *NOT* affected by whether Safe Mode is turned On or Off.
+disable_classes =
+
+; Colors for Syntax Highlighting mode.  Anything that's acceptable in
+; <font color="??????"> would work.
+;highlight.string  = #DD0000
+;highlight.comment = #FF9900
+;highlight.keyword = #007700
+;highlight.bg      = #FFFFFF
+;highlight.default = #0000BB
+;highlight.html    = #000000
+
+
+;
+; Misc
+;
+; Decides whether PHP may expose the fact that it is installed on the server
+; (e.g. by adding its signature to the Web server header).  It is no security
+; threat in any way, but it makes it possible to determine whether you use PHP
+; on your server or not.
+expose_php = On
+
+
+;;;;;;;;;;;;;;;;;;;
+; Resource Limits ;
+;;;;;;;;;;;;;;;;;;;
+
+max_execution_time = 30     ; Maximum execution time of each script, in seconds
+max_input_time = 60	; Maximum amount of time each script may spend parsing request data
+memory_limit = 8M      ; Maximum amount of memory a script may consume (8MB)
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+; Error handling and logging ;
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; error_reporting is a bit-field.  Or each number up to get desired error
+; reporting level
+; E_ALL             - All errors and warnings
+; E_ERROR           - fatal run-time errors
+; E_WARNING         - run-time warnings (non-fatal errors)
+; E_PARSE           - compile-time parse errors
+; E_NOTICE          - run-time notices (these are warnings which often result
+;                     from a bug in your code, but it's possible that it was
+;                     intentional (e.g., using an uninitialized variable and
+;                     relying on the fact it's automatically initialized to an
+;                     empty string)
+; E_CORE_ERROR      - fatal errors that occur during PHP's initial startup
+; E_CORE_WARNING    - warnings (non-fatal errors) that occur during PHP's
+;                     initial startup
+; E_COMPILE_ERROR   - fatal compile-time errors
+; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
+; E_USER_ERROR      - user-generated error message
+; E_USER_WARNING    - user-generated warning message
+; E_USER_NOTICE     - user-generated notice message
+;
+; Examples:
+;
+;   - Show all errors, except for notices
+;
+;error_reporting = E_ALL & ~E_NOTICE
+;
+;   - Show only errors
+;
+;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR
+;
+;   - Show all errors
+;
+error_reporting  =  E_ALL
+
+; Print out errors (as a part of the output).  For production web sites,
+; you're strongly encouraged to turn this feature off, and use error logging
+; instead (see below).  Keeping display_errors enabled on a production web site
+; may reveal security information to end users, such as file paths on your Web
+; server, your database schema or other information.
+display_errors = Off
+
+; Even when display_errors is on, errors that occur during PHP's startup
+; sequence are not displayed.  It's strongly recommended to keep
+; display_startup_errors off, except for when debugging.
+display_startup_errors = Off
+
+; Log errors into a log file (server-specific log, stderr, or error_log (below))
+; As stated above, you're strongly advised to use error logging in place of
+; error displaying on production web sites.
+log_errors = On
+
+; Set maximum length of log_errors. In error_log information about the source is
+; added. The default is 1024 and 0 allows to not apply any maximum length at all.
+log_errors_max_len = 1024
+
+; Do not log repeated messages. Repeated errors must occur in same file on same
+; line until ignore_repeated_source is set true.
+ignore_repeated_errors = Off
+
+; Ignore source of message when ignoring repeated messages. When this setting 
+; is On you will not log errors with repeated messages from different files or
+; sourcelines.
+ignore_repeated_source = Off
+
+; If this parameter is set to Off, then memory leaks will not be shown (on
+; stdout or in the log). This has only effect in a debug compile, and if 
+; error reporting includes E_WARNING in the allowed list
+report_memleaks = On
+
+; Store the last error/warning message in $php_errormsg (boolean).
+track_errors = Off
+
+; Disable the inclusion of HTML tags in error messages.
+;html_errors = Off
+
+; If html_errors is set On PHP produces clickable error messages that direct 
+; to a page describing the error or function causing the error in detail.
+; You can download a copy of the PHP manual from http://www.php.net/docs.php 
+; and change docref_root to the base URL of your local copy including the
+; leading '/'. You must also specify the file extension being used including 
+; the dot.
+;docref_root = "/phpmanual/"
+;docref_ext = .html
+  
+; String to output before an error message.
+;error_prepend_string = "<font color=ff0000>"
+
+; String to output after an error message.
+;error_append_string = "</font>"
+
+; Log errors to specified file.
+;error_log = filename
+
+; Log errors to syslog (Event Log on NT, not valid in Windows 95).
+;error_log = syslog
+
+
+;;;;;;;;;;;;;;;;;
+; Data Handling ;
+;;;;;;;;;;;;;;;;;
+;
+; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
+
+; The separator used in PHP generated URLs to separate arguments.
+; Default is "&". 
+;arg_separator.output = "&amp;"
+
+; List of separator(s) used by PHP to parse input URLs into variables.
+; Default is "&". 
+; NOTE: Every character in this directive is considered as separator!
+;arg_separator.input = ";&"
+
+; This directive describes the order in which PHP registers GET, POST, Cookie,
+; Environment and Built-in variables (G, P, C, E & S respectively, often
+; referred to as EGPCS or GPC).  Registration is done from left to right, newer
+; values override older values.
+variables_order = "GPCS"
+
+; Whether or not to register the EGPCS variables as global variables.  You may
+; want to turn this off if you don't want to clutter your scripts' global scope
+; with user data.  This makes most sense when coupled with track_vars - in which
+; case you can access all of the GPC variables through the $HTTP_*_VARS[],
+; variables.
+;
+; You should do your best to write your scripts so that they do not require
+; register_globals to be on;  Using form variables as globals can easily lead
+; to possible security problems, if the code is not very well thought of.
+register_globals = Off
+
+; This directive tells PHP whether to declare the argv&argc variables (that
+; would contain the GET information).  If you don't use these variables, you
+; should turn it off for increased performance.
+register_argc_argv = Off
+
+; Maximum size of POST data that PHP will accept.
+post_max_size = 8M
+
+; This directive is deprecated.  Use variables_order instead.
+gpc_order = "GPC"
+
+; Magic quotes
+;
+
+; Magic quotes for incoming GET/POST/Cookie data.
+magic_quotes_gpc = Off
+
+; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
+magic_quotes_runtime = Off    
+
+; Use Sybase-style magic quotes (escape ' with '' instead of \').
+magic_quotes_sybase = Off
+
+; Automatically add files before or after any PHP document.
+auto_prepend_file =
+auto_append_file =
+
+; As of 4.0b4, PHP always outputs a character encoding by default in
+; the Content-type: header.  To disable sending of the charset, simply
+; set it to be empty.
+;
+; PHP's built-in default is text/html
+default_mimetype = "text/html"
+;default_charset = "iso-8859-1"
+
+; Always populate the $HTTP_RAW_POST_DATA variable.                               
+;always_populate_raw_post_data = On
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;
+; Paths and Directories ;
+;;;;;;;;;;;;;;;;;;;;;;;;;
+
+; UNIX: "/path1:/path2"  
+;include_path = ".:/php/includes"
+;
+; Windows: "\path1;\path2"
+;include_path = ".;c:\php\includes"
+
+; The root of the PHP pages, used only if nonempty.
+; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
+; if you are running php as a CGI under any web server (other than IIS)
+; see documentation for security issues.  The alternate is to use the
+; cgi.force_redirect configuration below
+doc_root =
+
+; The directory under which PHP opens the script using /~usernamem used only
+; if nonempty.
+user_dir =
+
+; Directory in which the loadable extensions (modules) reside.
+; extension_dir = "./"
+extension_dir = "/usr/lib/php/extensions/"
+
+; Whether or not to enable the dl() function.  The dl() function does NOT work
+; properly in multithreaded servers, such as IIS or Zeus, and is automatically
+; disabled on them.
+enable_dl = On
+
+; cgi.force_redirect is necessary to provide security running PHP as a CGI under
+; most web servers.  Left undefined, PHP turns this on by default.  You can
+; turn it off here AT YOUR OWN RISK
+; **You CAN safely turn this off for IIS, in fact, you MUST.**
+; cgi.force_redirect = 1
+
+; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
+; every request.
+; cgi.nph = 1
+
+; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape 
+; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
+; will look for to know it is OK to continue execution.  Setting this variable MAY
+; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
+; cgi.redirect_status_env = ;
+
+; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI.  PHP's
+; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
+; what PATH_INFO is.  For more information on PATH_INFO, see the cgi specs.  Setting
+; this to 1 will cause PHP CGI to fix it's paths to conform to the spec.  A setting
+; of zero causes PHP to behave as before.  Default is zero.  You should fix your scripts
+; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
+; cgi.fix_pathinfo=1
+
+; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
+; security tokens of the calling client.  This allows IIS to define the
+; security context that the request runs under.  mod_fastcgi under Apache
+; does not currently support this feature (03/17/2002)
+; Set to 1 if running under IIS.  Default is zero.
+; fastcgi.impersonate = 1;
+
+; Disable logging through FastCGI connection
+; fastcgi.log = 0
+
+; cgi.rfc2616_headers configuration option tells PHP what type of headers to
+; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
+; is supported by Apache. When this option is set to 1 PHP will send
+; RFC2616 compliant header.
+; Default is zero.
+;cgi.rfc2616_headers = 0 
+
+
+;;;;;;;;;;;;;;;;
+; File Uploads ;
+;;;;;;;;;;;;;;;;
+
+; Whether to allow HTTP file uploads.
+file_uploads = On
+
+; Temporary directory for HTTP uploaded files (will use system default if not
+; specified).
+;upload_tmp_dir =
+
+; Maximum allowed size for uploaded files.
+upload_max_filesize = 10M
+
+
+;;;;;;;;;;;;;;;;;;
+; Fopen wrappers ;
+;;;;;;;;;;;;;;;;;;
+
+; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
+allow_url_fopen = On
+
+; Define the anonymous ftp password (your email address)
+;from="john@doe.com"
+
+; Define the user agent for php to send
+;user_agent="PHP"
+
+; Default timeout for socket based streams (seconds)
+default_socket_timeout = 60
+
+; If your scripts have to deal with files from Macintosh systems,
+; or you are running on a Mac and need to deal with files from
+; unix or win32 systems, setting this flag will cause PHP to
+; automatically detect the EOL character in those files so that
+; fgets() and file() will work regardless of the source of the file.
+; auto_detect_line_endings = Off
+
+
+;;;;;;;;;;;;;;;;;;;;;;
+; Dynamic Extensions ;
+;;;;;;;;;;;;;;;;;;;;;;
+;
+; If you wish to have an extension loaded automatically, use the following
+; syntax:
+;
+;   extension=modulename.extension
+;
+; For example, on Windows:
+;
+;   extension=msql.dll
+;
+; ... or under UNIX:
+;
+;   extension=msql.so
+;
+; Note that it should be the name of the module only; no directory information 
+; needs to go here.  Specify the location of the extension with the
+; extension_dir directive above.
+;
+; Load the MySQL module by default.  Comment this out if you don't use MySQL.
+extension=mysql.so
+
+; Load the gettext extension by default.  Comment this out if you don't have the
+; gettext shared library installed.
+extension=gettext.so
+
+;Windows Extensions
+;Note that MySQL and ODBC support is now built in, so no dll is needed for it.
+;
+;extension=php_mbstring.dll
+;extension=php_bz2.dll
+;extension=php_cpdf.dll
+;extension=php_crack.dll
+;extension=php_curl.dll
+;extension=php_db.dll
+;extension=php_dba.dll
+;extension=php_dbase.dll
+;extension=php_dbx.dll
+;extension=php_domxml.dll
+;extension=php_exif.dll
+;extension=php_fdf.dll
+;extension=php_filepro.dll
+;extension=php_gd2.dll
+;extension=php_gettext.dll
+;extension=php_hyperwave.dll
+;extension=php_iconv.dll
+;extension=php_ifx.dll
+;extension=php_iisfunc.dll
+;extension=php_imap.dll
+;extension=php_interbase.dll
+;extension=php_java.dll
+;extension=php_ldap.dll
+;extension=php_mcrypt.dll
+;extension=php_mhash.dll
+;extension=php_mime_magic.dll
+;extension=php_ming.dll
+;extension=php_mssql.dll
+;extension=php_msql.dll
+;extension=php_oci8.dll
+;extension=php_openssl.dll
+;extension=php_oracle.dll
+;extension=php_pdf.dll
+;extension=php_pgsql.dll
+;extension=php_printer.dll
+;extension=php_shmop.dll
+;extension=php_snmp.dll
+;extension=php_sockets.dll
+;extension=php_sybase_ct.dll
+;extension=php_w32api.dll
+;extension=php_xmlrpc.dll
+;extension=php_xslt.dll
+;extension=php_yaz.dll
+;extension=php_zip.dll
+
+
+;;;;;;;;;;;;;;;;;;;
+; Module Settings ;
+;;;;;;;;;;;;;;;;;;;
+
+[Syslog]
+; Whether or not to define the various syslog variables (e.g. $LOG_PID,
+; $LOG_CRON, etc.).  Turning it off is a good idea performance-wise.  In
+; runtime, you can define these variables by calling define_syslog_variables().
+define_syslog_variables  = Off
+
+[mail function]
+; For Win32 only.
+SMTP = localhost
+smtp_port = 25
+
+; For Win32 only.
+;sendmail_from = me@example.com
+
+; For Unix only.  You may supply arguments as well (default: "sendmail -t -i").
+;sendmail_path =
+
+[Java]
+;java.class.path = .\php_java.jar
+;java.home = c:\jdk
+;java.library = c:\jdk\jre\bin\hotspot\jvm.dll 
+;java.library.path = .\
+
+[SQL]
+sql.safe_mode = Off
+
+[ODBC]
+;odbc.default_db    =  Not yet implemented
+;odbc.default_user  =  Not yet implemented
+;odbc.default_pw    =  Not yet implemented
+
+; Allow or prevent persistent links.
+odbc.allow_persistent = On
+
+; Check that a connection is still valid before reuse.
+odbc.check_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+odbc.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+odbc.max_links = -1  
+
+; Handling of LONG fields.  Returns number of bytes to variables.  0 means
+; passthru.
+odbc.defaultlrl = 4096  
+
+; Handling of binary data.  0 means passthru, 1 return as is, 2 convert to char.
+; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
+; of uodbc.defaultlrl and uodbc.defaultbinmode
+odbc.defaultbinmode = 1  
+
+[MySQL]
+; Allow or prevent persistent links.
+mysql.allow_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+mysql.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+mysql.max_links = -1
+
+; Default port number for mysql_connect().  If unset, mysql_connect() will use
+; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
+; compile-time value defined MYSQL_PORT (in that order).  Win32 will only look
+; at MYSQL_PORT.
+mysql.default_port =
+
+; Default socket name for local MySQL connects.  If empty, uses the built-in
+; MySQL defaults.
+mysql.default_socket =
+
+; Default host for mysql_connect() (doesn't apply in safe mode).
+mysql.default_host =
+
+; Default user for mysql_connect() (doesn't apply in safe mode).
+mysql.default_user =
+
+; Default password for mysql_connect() (doesn't apply in safe mode).
+; Note that this is generally a *bad* idea to store passwords in this file.
+; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
+; and reveal this password!  And of course, any users with read access to this
+; file will be able to reveal the password as well.
+mysql.default_password =
+
+; Maximum time (in seconds) for connect timeout. -1 means no limit
+mysql.connect_timeout = 60
+
+; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
+; SQL-Errors will be displayed.
+mysql.trace_mode = Off
+
+[mSQL]
+; Allow or prevent persistent links.
+msql.allow_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+msql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent).  -1 means no limit.
+msql.max_links = -1
+
+[PostgresSQL]
+; Allow or prevent persistent links.
+pgsql.allow_persistent = On
+
+; Detect broken persistent links always with pg_pconnect(). 
+; Auto reset feature requires a little overheads.
+pgsql.auto_reset_persistent = Off
+
+; Maximum number of persistent links.  -1 means no limit.
+pgsql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent).  -1 means no limit.
+pgsql.max_links = -1
+
+; Ignore PostgreSQL backends Notice message or not.
+; Notice message logging require a little overheads.
+pgsql.ignore_notice = 0
+
+; Log PostgreSQL backends Noitce message or not.
+; Unless pgsql.ignore_notice=0, module cannot log notice message.
+pgsql.log_notice = 0
+
+[Sybase]
+; Allow or prevent persistent links.
+sybase.allow_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+sybase.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+sybase.max_links = -1
+
+;sybase.interface_file = "/usr/sybase/interfaces"
+
+; Minimum error severity to display.
+sybase.min_error_severity = 10
+
+; Minimum message severity to display.
+sybase.min_message_severity = 10
+
+; Compatability mode with old versions of PHP 3.0.
+; If on, this will cause PHP to automatically assign types to results according
+; to their Sybase type, instead of treating them all as strings.  This
+; compatibility mode will probably not stay around forever, so try applying
+; whatever necessary changes to your code, and turn it off.
+sybase.compatability_mode = Off
+
+[Sybase-CT]
+; Allow or prevent persistent links.
+sybct.allow_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+sybct.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+sybct.max_links = -1
+
+; Minimum server message severity to display.
+sybct.min_server_severity = 10
+
+; Minimum client message severity to display.
+sybct.min_client_severity = 10
+
+[dbx]
+; returned column names can be converted for compatibility reasons
+; possible values for dbx.colnames_case are
+; "unchanged" (default, if not set)
+; "lowercase"
+; "uppercase"
+; the recommended default is either upper- or lowercase, but
+; unchanged is currently set for backwards compatibility
+dbx.colnames_case = "lowercase"
+
+[bcmath]
+; Number of decimal digits for all bcmath functions.
+bcmath.scale = 0
+
+[browscap]
+;browscap = extra/browscap.ini
+
+[Informix]
+; Default host for ifx_connect() (doesn't apply in safe mode).
+ifx.default_host =
+
+; Default user for ifx_connect() (doesn't apply in safe mode).
+ifx.default_user =
+
+; Default password for ifx_connect() (doesn't apply in safe mode).
+ifx.default_password =
+
+; Allow or prevent persistent links.
+ifx.allow_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+ifx.max_persistent = -1
+
+; Maximum number of links (persistent + non-persistent).  -1 means no limit.
+ifx.max_links = -1
+
+; If on, select statements return the contents of a text blob instead of its id.
+ifx.textasvarchar = 0
+
+; If on, select statements return the contents of a byte blob instead of its id.
+ifx.byteasvarchar = 0
+
+; Trailing blanks are stripped from fixed-length char columns.  May help the
+; life of Informix SE users.
+ifx.charasvarchar = 0
+
+; If on, the contents of text and byte blobs are dumped to a file instead of
+; keeping them in memory.
+ifx.blobinfile = 0
+
+; NULL's are returned as empty strings, unless this is set to 1.  In that case,
+; NULL's are returned as string 'NULL'.
+ifx.nullformat = 0
+
+[Session]
+; Handler used to store/retrieve data.
+session.save_handler = files
+
+; Argument passed to save_handler.  In the case of files, this is the path
+; where data files are stored. Note: Windows users have to change this 
+; variable in order to use PHP's session functions.
+;session.save_path = /tmp
+
+; Whether to use cookies.
+session.use_cookies = 1
+
+; This option enables administrators to make their users invulnerable to 
+; attacks which involve passing session ids in URLs; defaults to 0.
+; session.use_only_cookies = 1
+
+; Name of the session (used as cookie name).
+session.name = PHPSESSID
+
+; Initialize session on request startup.
+session.auto_start = 0
+
+; Lifetime in seconds of cookie or, if 0, until browser is restarted.
+session.cookie_lifetime = 0
+
+; The path for which the cookie is valid.
+session.cookie_path = /
+
+; The domain for which the cookie is valid.
+session.cookie_domain =
+
+; Handler used to serialize data.  php is the standard serializer of PHP.
+session.serialize_handler = php
+
+; Define the probability that the 'garbage collection' process is started
+; on every session initialization.
+; The probability is calculated by using gc_probability/gc_divisor,
+; e.g. 1/100 means there is a 1% chance that the GC process starts
+; on each request.
+
+session.gc_probability = 1
+session.gc_divisor     = 1000
+
+; After this number of seconds, stored data will be seen as 'garbage' and
+; cleaned up by the garbage collection process.
+session.gc_maxlifetime = 1440
+
+; PHP 4.2 and less have an undocumented feature/bug that allows you to
+; to initialize a session variable in the global scope, albeit register_globals
+; is disabled.  PHP 4.3 and later will warn you, if this feature is used.
+; You can disable the feature and the warning separately. At this time,
+; the warning is only displayed, if bug_compat_42 is enabled.
+
+session.bug_compat_42 = 0
+session.bug_compat_warn = 1
+
+; Check HTTP Referer to invalidate externally stored URLs containing ids.
+; HTTP_REFERER has to contain this substring for the session to be
+; considered as valid.
+session.referer_check =
+
+; How many bytes to read from the file.
+session.entropy_length = 0
+
+; Specified here to create the session id.
+session.entropy_file =
+
+;session.entropy_length = 16
+
+;session.entropy_file = /dev/urandom
+
+; Set to {nocache,private,public,} to determine HTTP caching aspects.
+; or leave this empty to avoid sending anti-caching headers.
+session.cache_limiter = nocache
+
+; Document expires after n minutes.
+session.cache_expire = 180
+
+; trans sid support is disabled by default.
+; Use of trans sid may risk your users security.
+; Use this option with caution.
+; - User may send URL contains active session ID
+;   to other person via. email/irc/etc.
+; - URL that contains active session ID may be stored
+;   in publically accessible computer. 
+; - User may access your site with the same session ID
+;   always using URL stored in browser's history or bookmarks.
+session.use_trans_sid = 0
+
+; The URL rewriter will look for URLs in a defined set of HTML tags.
+; form/fieldset are special; if you include them here, the rewriter will
+; add a hidden <input> field with the info which is otherwise appended
+; to URLs.  If you want XHTML conformity, remove the form entry.
+; Note that all valid entries require a "=", even if no value follows.
+url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
+
+[MSSQL]
+; Allow or prevent persistent links.
+mssql.allow_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+mssql.max_persistent = -1
+
+; Maximum number of links (persistent+non persistent).  -1 means no limit.
+mssql.max_links = -1
+
+; Minimum error severity to display.
+mssql.min_error_severity = 10
+
+; Minimum message severity to display.
+mssql.min_message_severity = 10
+
+; Compatability mode with old versions of PHP 3.0.
+mssql.compatability_mode = Off
+
+; Connect timeout
+;mssql.connect_timeout = 5
+
+; Query timeout
+;mssql.timeout = 60
+
+; Valid range 0 - 2147483647.  Default = 4096.
+;mssql.textlimit = 4096
+
+; Valid range 0 - 2147483647.  Default = 4096.
+;mssql.textsize = 4096
+
+; Limits the number of records in each batch.  0 = all records in one batch.
+;mssql.batchsize = 0
+
+; Specify how datetime and datetim4 columns are returned
+; On => Returns data converted to SQL server settings
+; Off => Returns values as YYYY-MM-DD hh:mm:ss
+;mssql.datetimeconvert = On
+
+; Use NT authentication when connecting to the server
+mssql.secure_connection = Off
+
+; Specify max number of processes. Default = 25
+;mssql.max_procs = 25
+
+[Assertion]
+; Assert(expr); active by default.
+;assert.active = On
+
+; Issue a PHP warning for each failed assertion.
+;assert.warning = On
+
+; Don't bail out by default.
+;assert.bail = Off
+
+; User-function to be called if an assertion fails.
+;assert.callback = 0
+
+; Eval the expression with current error_reporting().  Set to true if you want
+; error_reporting(0) around the eval().
+;assert.quiet_eval = 0
+
+[Ingres II]
+; Allow or prevent persistent links.
+ingres.allow_persistent = On
+
+; Maximum number of persistent links.  -1 means no limit.
+ingres.max_persistent = -1
+
+; Maximum number of links, including persistents.  -1 means no limit.
+ingres.max_links = -1
+
+; Default database (format: [node_id::]dbname[/srv_class]).
+ingres.default_database =
+
+; Default user.
+ingres.default_user =
+
+; Default password.
+ingres.default_password =
+
+[Verisign Payflow Pro]
+; Default Payflow Pro server.
+pfpro.defaulthost = "test-payflow.verisign.com"
+
+; Default port to connect to.
+pfpro.defaultport = 443
+
+; Default timeout in seconds.
+pfpro.defaulttimeout = 30
+
+; Default proxy IP address (if required).
+;pfpro.proxyaddress =
+
+; Default proxy port.
+;pfpro.proxyport =
+
+; Default proxy logon.
+;pfpro.proxylogon =
+
+; Default proxy password.
+;pfpro.proxypassword =
+
+[com]
+; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
+;com.typelib_file = 
+; allow Distributed-COM calls
+;com.allow_dcom = true
+; autoregister constants of a components typlib on com_load()
+;com.autoregister_typelib = true
+; register constants casesensitive
+;com.autoregister_casesensitive = false
+; show warnings on duplicate constat registrations
+;com.autoregister_verbose = true
+
+[Printer]
+;printer.default_printer = ""
+
+[mbstring]
+; language for internal character representation.
+;mbstring.language = Japanese
+
+; internal/script encoding.
+; Some encoding cannot work as internal encoding.
+; (e.g. SJIS, BIG5, ISO-2022-*)
+;mbstring.internal_encoding = EUC-JP
+
+; http input encoding.
+;mbstring.http_input = auto
+
+; http output encoding. mb_output_handler must be
+; registered as output buffer to function
+;mbstring.http_output = SJIS
+
+; enable automatic encoding translation accoding to 
+; mbstring.internal_encoding setting. Input chars are
+; converted to internal encoding by setting this to On.
+; Note: Do _not_ use automatic encoding translation for
+;       portable libs/applications.
+;mbstring.encoding_translation = Off
+
+; automatic encoding detection order.
+; auto means 
+;mbstring.detect_order = auto
+
+; substitute_character used when character cannot be converted
+; one from another
+;mbstring.substitute_character = none;
+
+; overload(replace) single byte functions by mbstring functions.
+; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
+; etc. Possible values are 0,1,2,4 or combination of them.
+; For example, 7 for overload everything.
+; 0: No overload
+; 1: Overload mail() function
+; 2: Overload str*() functions
+; 4: Overload ereg*() functions
+;mbstring.func_overload = 0
+
+[FrontBase]
+;fbsql.allow_persistent = On
+;fbsql.autocommit = On
+;fbsql.default_database = 
+;fbsql.default_database_password =
+;fbsql.default_host =
+;fbsql.default_password =
+;fbsql.default_user = "_SYSTEM"
+;fbsql.generate_warnings = Off
+;fbsql.max_connections = 128
+;fbsql.max_links = 128
+;fbsql.max_persistent = -1
+;fbsql.max_results = 128
+;fbsql.batchSize = 1000
+
+[Crack]
+; Modify the setting below to match the directory location of the cracklib
+; dictionary files.  Include the base filename, but not the file extension.
+; crack.default_dictionary = "c:\php\lib\cracklib_dict"
+
+[exif]
+; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. 
+; With mbstring support this will automatically be converted into the encoding
+; given by corresponding encode setting. When empty mbstring.internal_encoding 
+; is used. For the decode settings you can distinguish between motorola and 
+; intel byte order. A decode setting cannot be empty.
+;exif.encode_unicode = ISO-8859-15
+;exif.decode_unicode_motorola = UCS-2BE
+;exif.decode_unicode_intel    = UCS-2LE
+;exif.encode_jis = 
+;exif.decode_jis_motorola = JIS
+;exif.decode_jis_intel    = JIS
+
+; Local Variables:
+; tab-width: 4
+; End:
diff --git a/templates/vserver-legacy.d/etc/apache/vhosts b/templates/vserver-legacy.d/etc/apache/vhosts
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/templates/vserver-legacy.d/etc/apache/vhosts