diff options
Diffstat (limited to 'modules/ripit')
| -rw-r--r-- | modules/ripit/ripit.dot/config.link | 722 |
1 files changed, 722 insertions, 0 deletions
diff --git a/modules/ripit/ripit.dot/config.link b/modules/ripit/ripit.dot/config.link new file mode 100644 index 0000000..6e4b886 --- /dev/null +++ b/modules/ripit/ripit.dot/config.link @@ -0,0 +1,722 @@ + +##### +# +# RipIT 3.8.0 configuration file. +# +# For further information on ripit configuration / parameters +# and examples see the manpage or the README provided with ripit +# or type ripit --help . + + +##### +# +# Ripping device & path. +# + +# cddevice: Define ripping device if other than /dev/cdrom. +# Default: /dev/cdrom + +cddevice=/dev/cdrom + +# scsidevice: Device name for special devices if the non ripping +# commands should be executed on a different device node. This might +# be useful for some old SCSI devices. If not set the cddevice will +# be used. +# Example: /dev/sr18 +# Default: not set + +scsidevice= + +# output: Path for audio files. If not set, $HOME will be used. +# Default: not set + +output=/var/cache/media/incoming + +# directory permissions: Permissions for directories. +# Default: 0755 + +dpermission=0755 + +# file permissions: Permissions for sound and log files. +# If not set, uses the default system settings. +# Default: not set + +fpermission= + + +##### +# +# Ripping options. +# + +# ripper: select CD ripper +# 0 - dagrab +# 1 - cdparanoia +# 2 - cdda2wav +# 3 - tosha +# 4 - cdd +# Default: cdparanoia + +ripper=1 + +# ripopt: User definable options for the CD ripper. +# Default: not set + +ripopt= + +# span: Rip only part of a single track or the merged track-interval. +# Possible values: any in the format hh:mm:ss.ff-hh:mm:ss.ff +# Example: rip first 30s of each track: 0-30 +# Default: not set + +span= + +# paranoia: Turn "paranoia" on or off for dagrab and cdparanoia. +# Possible values: 0 - no paranoia, 1 - use paranoia +# 2 - switch paranoia off if ripping fails on one +# track and retry this track without paranoia +# Default: 1 - use paranoia + +paranoia=1 + +# ghost: Analyze the wavs for possible gaps, split the wav into +# chunks of sound and delete blank tracks. +# Possible values: 0 - off, 1 - on +# Default: off + +ghost=0 + +# prepend: Enlarge the the chunk of sound by a number of +# seconds at the beginning (if possible). +# Possible values: any positive number and zero; precision in +# tenths of seconds. Be aware of low numbers. +# Default: 2.0 + +prepend=2 + +# extend: Enlarge the the chunk of sound by a number of +# seconds at the end (if possible). +# Possible values: any positive number and zero; precision in +# tenths of seconds. Be aware of low numbers. +# Default: 2.0 + +extend=2 + +# resume: Resume a previously started session. +# Possible values: 0 - off, 1 - on +# Default: off + +resume=0 + +# overwrite: Default behaviour of Ripit is not to overwrite existing +# directories, a suffix will be added if directory name exists. +# Use option overwrite to prevent this and either overwrite a previous +# rip or force Ripit to quit or even eject the disc. If ejection is +# chosen, the disc will be ejected even if option eject has not been +# switched on. +# Possible values: n - off, y - on, +# q - quit, e - quit and force ejection +# Default: off + +overwrite=n + + +##### +# +# Encoding options +# + +# encode: Encode the wavs. +# Possible values: 0 - off, 1 - on +# Default: on + +encode=1 + +# coder: Select encoders for audio files: +# 0 - Lame (mp3) +# 1 - Oggenc (ogg) +# 2 - Flac (flac) +# 3 - Faac (m4a) +# 4 - mp4als (als) +# 5 - Musepack (mpc) +# Multiple encoders can be selected by giving a comma-separated list +# Example: coder=0,0,1,2 encodes CD twice to mp3, ogg and flac files +# Default: Lame + +coder=0 + +### +# +# lame (mp3) encoder options +# + +# qualame: Sets audio quality for lame encoder in cbr (lame-option -q) +# and vbr (lame-option -V) mode, comma separated list. +# Possible values: 0...9, off +# 0: higest quality +# 9: lowest quality +# Can be set to "off" if all options are passed to --lameopt. +# Example: qualame=off,off +# Note: default value is the same for cbr and vbr, +# although vbr-default should be 4. +# Default: 5 + +qualame=5 + +# lameopt: Additional options for lame encoder, comma separated list. +# Example: lameopt=-b 128,--preset extreme +# Default: not set + +lameopt= + +# vbrmode: Enable variable bitrate for lame encoder. +# Possible values: "old" or "new" +# Default: not set + +vbrmode= + +# bitrate: Sets bitrate for lame encoder. +# Possible values: 32...320, off +# Should be set to "off" if vbr is used +# Default: 128 + +bitrate=128 + +# maxrate: Sets maximum bitrate for lame (when using vbr) and oggenc. +# Possible values: 0 - off, 32...320 +# Default: 0 + +maxrate=0 + +# preset: Use lame presets. To set the "fast" switch, use --vbrmode new. +# Possible values: medium, standard, extreme, insane +# +# medium: 160kbps +# standard: 192kbps +# extreme: 256kbps +# insane: 320kbps +# +# Default: not set + +preset=extreme + +### +# +# oggenc (ogg) encoder options +# + +# qualoggenc: Sets audio quality for oggenc. +# Possible values: 1..10, off +# 1: lowest quality +# 10: highest quality +# Can be set to "off" +# Default: 3 + +qualoggenc=7 + +# oggencopt: Additional options for oggenc, comma separated list. +# Default: not set + +oggencopt= + +### +# +# flac (lossless) encoder options +# + +# quaflac: Sets audio compression for flac encoder +# Possible values: 0...8, off +# 0: lowest compression +# 8: highest compression +# Can be set to "off" +# Default: 5 + +quaflac=5 + +# flacopt: Additional options for flac encoder, comma separated list. +# Default: not set + +flacopt= + +### +# +# faac (m4a) encoder options +# + +# quafaac: Sets audio quality for faac encoder +# Possible values: 10...500, off +# 10: lowest quality +# 500: highest quality +# Can be set to "off" +# Default: 100 + +quafaac=100 + +# faacopt: Additional options for faac encoder, comma separated list. +# Default: not set + +faacopt= + +### +# +# mp4als (als) encoder options +# + +# quamp4als: Would set compression level for mp4als, but mp4als does not +# accept any options (?). +# Default: 0 + +quamp4als=0 + +# mp4alsopt: Additional options for mp4als encoder, none are accepted, +# comma separated list. +# Default: not set + +mp4alsopt= + +### +# +# Musepack (mpc) encoder options +# + +# musenc: The encoder name on the command line +# Possible values: any +# Example: musenc=mppenc for older versions +# Default: mpcenc + +musenc=mpcenc + +# quamuse: Sets audio quality for Musepack encoder +# Possible values: 0...10, off +# 0: lowest quality +# 10: highest quality +# Can be set to "off" +# Default: 5 + +quamuse=5 + +# museopt: Additional options for Musepack encoder, +# comma separated list. +# Default: not set + +museopt= + + +##### +# +# Trackname and directory template +# + +# dirtemplate: Template for directory structure +# The template can be created using any legal +# character, including slashes (/) for multi-level +# directory-trees, and the following variables: +# $album +# $artist +# $iletter +# $genre +# $quality +# $suffix +# $trackname +# $tracknum +# $year +# $trackno +# +# The variable $iletter is the initial letter of +# the artist variable, the $quality is the quality +# according to the encoding format defined by $suffix. +# The variable $quality reflects the encoder options, +# not the arguments of option --quality which may be set +# to off. The variable $trackno is the total number of tracks +# of the release. +# +# dirtemplate is an array, for each encoder a different +# dirtemplate may be defined (i. e. for each encoder state +# a line starting with dirtemplate=...). +# +# Example: +# dirtemplate="$suffix/hard_path/$iletter/$artist/$year - $album" +# +# The double quotes (") are mandatory! +# Default: "$artist - $album" + +dirtemplate="$artist - $album" + +# tracktemplate: Template for track names +# "tracktemplate" is used similarly to "dirtemplate" +# Default: "$tracknum $trackname" + +tracktemplate="$tracknum $trackname" + +# infolog: Log certain operations to file +# (e.g. system calls, creation of dirs/files) +# Possible values: filename (full path, no ~ here!) +# Default: not set + +infolog= + +# lowercase: Convert filenames to lowercase +# Possible values: 0 - off, 1 - on +# Default: off + +lowercase=0 + +# uppercasefirst: Convert filenames and tags to uppercase first, +# not recommended. To be used on the command line only if CDDB entry +# is in uppercase. +# Possible values: 0 - off, 1 - on +# Default: off + +uppercasefirst=0 + +# underscore: Replace blanks in filenames with underscores +# Possible values: 0 - off, 1 - on +# Default: off + +underscore=0 + +# chars: Exclude special characters in file names and path. +# Note: following characters will always be purged: +# ; > < " and \015 . +# Side note: if calling this option on the command line without +# argument, following characters will be purged: |\:*?$ plus +# blanks and periods at beginning and end of file names and directories. +# This is identical to the word NTFS passed as argument to the command +# line or stated here in the config file. The word HFS will purge colons +# only plus blanks and periods at beginning of file names and +# directories. +# +# No need to escape the special characters here in the config file. +# Possible values: HFS, NTFS, none, any (?) +# Default: not set + +chars= + +# playlist: Create m3u playlist with or without the full path +# in the filename. +# Possible values: 0 - off, + 1 - on with full path +# 2 - on with no path (filename only) +# Default: on (with full path) + +playlist=1 + + +##### +# +# Audio file tagging +# + +# year-tag: State a year (mp3, m4a) or a date (ogg, flac) tag. +# Possible values: integer +# Default: not set + +year= + +# comment-tag: State a comment (mp3, m4a, mpc) or a +# description (ogg, flac) tag. To write the cddbid used for freedb +# or the MusicBrainz discid into the comment, use the word "cddbid" +# or "discid". +# Possible values: discid, cddbid or any string +# Default: not set + +comment= + +# utftag: Use Lame-tags in UTF-8 or convert them +# (but not the filenames) from Unicode to ISO8859-1. +# Use when your mp3-audio player doesn't support Unicode tags. +# Recommended with Lame. +# Possible values: 0 - off, 1 - on +# Default: on + +utftag=1 + + +##### +# +# CDDB options +# + +# mb: Access MusicBrainz DB via WebService::MusicBrainz module instead +# of the http protocol (see below). +# Possible values: 0 - off, 1 - on +# Default: off + +mb=0 + +# CDDBHOST: Specifies the CDDB server +# Possible values: freedb.org, freedb2.org or musicbrainz.org +# Note: Full name of the server used is $mirror.$CDDBHOST, except for +# freedb2.org (no mirror) and musicbrainz.org has freedb as default +# mirror. +# E.g. default server is freedb.freedb.org +# Default: freedb.org + +CDDBHOST=freedb.org + +# mirror: Selects freedb mirror +# Possible values: "freedb" or any freedb mirrors +# See www.freedb.org for mirror list +# Note: Full name of the server used is $mirror.$CDDBHOST +# E.g., default server is freedb.freedb.org +# Default: freedb + +mirror=freedb + +# transfer: Set transfer mode for cddb queries +# Possible values: cddb, http +# Note: CDDB servers freedb2.org and musicbrainz.org may need transfer +# mode http. +# Default: cddb + +transfer=cddb + +# proto: Set CDDP protocol level +# Possible values: 5, 6 +# Protocol level 6 supports Unicode (UTF-8) +# Default: 6 + +proto=6 + +# proxy: Address of http-proxy, if needed +# Default: not set + +proxy= + +# mailad: Mail address for cddb submissions +# Valid user email address for submitting cddb entries +# Default: not set + +mailad= + +# archive: Read and save cddb data on local machine +# Possible values: 0 - off, 1 - on +# Default: off + +archive=0 + +# submission: Submit new or edited cddb entries to +# freeCDDB +# Possible values: 0 - off, 1 - on +# Default: on + +submission=1 + +# interaction: Turns on or off user interaction in cddb dialog +# Possible values: 0 - off, 1 - on +# Default: on + +interaction=1 + + +##### +# +# LCD options +# + +# lcd: Use lcdproc to display status on LCD +# Possible values: 0 - off, 1 - on +# Default: off + +lcd=0 + +# lcdhost: Specify the lcdproc host +# Default: localhost + +lcdhost=localhost + +# lcdport: Specify port number for localhost +# Default: 13666 + +lcdport=13666 + + +##### +# +# Distributed ripping options +# + +# sshlist: Comma separated list of remote machines ripit shall use +# for encoding. The output path must be the same for all machines. +# Specify the login (login@machine) only if not the +# same for the remote machine. Else just state the +# machine names. +# Default: not set + +sshlist= + +# scp: Copy files to encode to the remote machine. +# Use if the fs can not be accessed on the remote machines +# Possible values: 0 - off, 1 - on +# Default: off + +scp=0 + +# local: Turn off encoding on local machine, e.g. use only remote +# machines. +# Possible values: 0 - off, 1 - on +# Example: local=0 (off) turns off encoding on the +# local machine +# Default: on + +local=1 + + +##### +# +# Misc. options +# + +# verbosity: Run silent (do not output comments, status etc.) (0), with +# minimal (1), normal without encoder msgs (2), normal (3), verbose (4) +# or extremely verbose (5). +# Possible values: 0...5 +# Default: 3 - normal + +verbose=3 + +# eject: Eject cd after finishing encoding. +# Possible values: 0 - off, 1 - on +# Default: off + +eject=0 + +# ejectcmd: Command used to eject and close CD tray. +# Possible values: string +# Example: /usr/sbin/cdcontrol for FreeBSD +# Default: eject + +ejectcmd=eject + +# ejectopt: Options to command used to eject or close CD. +# Possible values: string or "{cddev}" to design the CD +# device. +# Note: Don't use options -t / close or eject, +# RipIT knows when to eject or load the tray +# Default: {cddev} + +ejectopt={cddev} + +# quitnodb: Give up CD if no CDDB entry found. +# Useful if option --loop or --nointeraction are on. +# Default behaviour is to let operator enter data or to use default +# artist, album and track names. +# Possible values: 0 - off, 1 - on +# Default: off + +quitnodb=0 + +# execmd: Execute a command when done with ripping. Quote the command +# if needed. +# Possible values: none - off, string - on +# Example: execmd="get_cover -a \"$artist\" -r \"$album\"" +# Default: off + +execmd= + +# book: Create an audiobook, i. e. merge all tracks into one single +# file, option --ghost will be switched off and file suffix will be +# m4b. Make sure to use encoder faac, ripit will not check that. +# A chapter file will be written for chapter marks. +# Possible values: 0 - off, 1 - on +# Default: off + +book=0 + +# loop: Continue with a new CD when the previous one is done. +# Option --eject will be forced. To start ripping process immediately +# after ejection of previous disc, use experimental argument 2. Ripit +# will restart as child process, one might see the prompt and it will +# be necessary to manually terminate the process! Do not use! +# Possible values: 0 - off, 1 - on, 2 - immediate restart, experimental +# Default: off + +loop=0 + +# halt: Powers off machine after finishing encoding +# Possible values: 0 - off, 1 - on +# Default: off + +halt=0 + +# nice: Sets "nice" value for the encoding process +# Possible values: 0..19 for normal users, +# -20..19 for user "root" +# Default: 0 + +nice=0 + +# nicerip: Sets "nice" value for the ripping process +# Possible values: 0..19 for normal users, +# -20..19 for user "root" +# Default: 0 + +nicerip=0 + +# threads: Comma separated list of numbers giving maximum +# of allowed encoder processes to run at the same time +# (on each machine when using sshlist). +# Possible values: comma separated integers +# Default: 1 + +threads=1 + +# md5sum: Create file with md5sums for each type of sound files. +# Possible values: 0 - off, 1 - on +# Default: off + +md5sum=0 + +# wav: Don't delete wave-files after encoding. +# Possible values: 0 - off, 1 - on +# Default: off + +wav=0 + +# normalize: Normalizes the wave-files to a given dB-value +# (default: -12dB) +# See http://normalize.nongnu.org for details. +# Possible values: 0 - off, 1 - on +# Default: off + +normalize=0 + +# normcmd: Command to be used to normalize. +# Possible values: string +# Example: normalize-audio (when using Debian) +# Upstream default: normalize + +# We are running Debian so set to normalize-audio +normcmd=normalize-audio + +# normopt: Options to pass to normalize +# Possible values: -a -nndB : Normalize to -nn dB, default is -12dB, +# Value range: All values <= 0dB +# Example : normalize -a -20dB *.wav +# -b : Batch mode - loudness differences +# between individual tracks of a CD are +# maintained +# -m : Mix mode - all track are normalized to +# the same loudness +# -v : Verbose operation +# -q : Quiet operation +# For further options see normalize documentation. +# Default: -b +# The -v option will be added by default according to RipITs verbosity + +normopt=-b + +# cdtoc: Create a toc file to burn the wavs with +# cd-text using cdrdao or cdrecord (in dao mode). +# Possible values: 0 - off, 1 - on +# Default: off + +cdtoc=0 + +# inf: Create inf files to burn the wavs with +# cd-text using wodim or cdrecord (in dao mode). +# Possible values: 0 - off, 1 - on +# Default: off + +inf=0 + |