aboutsummaryrefslogtreecommitdiff
path: root/templates
diff options
context:
space:
mode:
Diffstat (limited to 'templates')
-rw-r--r--templates/sshd_config/CentOS.erb (renamed from templates/sshd_config/CentOS_normal.erb)86
-rw-r--r--templates/sshd_config/Debian_etch.erb163
-rw-r--r--templates/sshd_config/Debian_lenny.erb169
-rw-r--r--templates/sshd_config/Debian_normal.erb102
-rw-r--r--templates/sshd_config/Gentoo.erb (renamed from templates/sshd_config/Gentoo_normal.erb)83
-rw-r--r--templates/sshd_config/OpenBSD.erb (renamed from templates/sshd_config/OpenBSD_normal.erb)83
6 files changed, 543 insertions, 143 deletions
diff --git a/templates/sshd_config/CentOS_normal.erb b/templates/sshd_config/CentOS.erb
index a14120f..6a16d77 100644
--- a/templates/sshd_config/CentOS_normal.erb
+++ b/templates/sshd_config/CentOS.erb
@@ -10,13 +10,19 @@
# possible, but leave them commented. Uncommented options change a
# default value.
-#Port 22
+<%- unless real_sshd_port.to_s.empty? then %>
+Port <%= real_sshd_port %>
+<%- else %>
+Port 22
+<%- end %>
+
+# Use these options to restrict which interfaces/protocols sshd will bind to
+<% for address in real_sshd_listen_address -%>
+ListenAddress <%= address %>
+<% end -%>
+#AddressFamily any
#Protocol 2,1
Protocol 2
-#AddressFamily any
-#ListenAddress 0.0.0.0
-#ListenAddress ::
-
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
@@ -41,22 +47,57 @@ PermitRootLogin <%= real_sshd_permit_root_login %>
<%- else %>
PermitRootLogin without-password
<%- end %>
-#StrictModes yes
+
+<%- if real_sshd_strict_modes.to_s == 'yes' then %>
+StrictModes yes
+<%- else %>
+StrictModes no
+<%- end %>
+
#MaxAuthTries 6
-#RSAAuthentication yes
-#PubkeyAuthentication yes
-#AuthorizedKeysFile .ssh/authorized_keys
+<%- if real_sshd_rsa_authentication.to_s == 'yes' then %>
+RSAAuthentication yes
+<%- else %>
+RSAAuthentication no
+<%- end %>
+
+<%- if real_sshd_pubkey_authentication.to_s == 'yes' then %>
+PubkeyAuthentication yes
+<%- else %>
+PubkeyAuthentication no
+<%- end %>
+
+<%- unless real_sshd_authorized_keys_file.to_s.empty? then %>
+AuthorizedKeysFile <%= real_sshd_authorized_keys_file %>
+<%- else %>
+AuthorizedKeysFile %h/.ssh/authorized_keys
+<%- end %>
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#RhostsRSAAuthentication no
+<%- if real_sshd_rhosts_rsa_authentication.to_s == 'yes' then %>
+RhostsRSAAuthentication yes
+<%- else %>
+RhostsRSAAuthentication no
+<% end -%>
+
# similar for protocol version 2
-#HostbasedAuthentication no
+<%- if real_sshd_hostbased_authentication.to_s == 'yes' then %>
+HostbasedAuthentication yes
+<%- else %>
+HostbasedAuthentication no
+<% end -%>
+
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
+
# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
+<%- if real_sshd_ignore_rhosts.to_s == 'yes' then %>
+IgnoreRhosts yes
+<%- else %>
+IgnoreRhosts no
+<% end -%>
# To disable tunneled clear text passwords, change to no here!
<%- if real_sshd_password_authentication.to_s == 'yes' then %>
@@ -64,11 +105,20 @@ PasswordAuthentication yes
<%- else %>
PasswordAuthentication no
<%- end %>
-#PermitEmptyPasswords no
+
+# To enable empty passwords, change to yes (NOT RECOMMENDED)
+<%- if real_sshd_permit_empty_passwords.to_s == 'yes' then %>
+PermitEmptyPasswords yes
+<% else -%>
+PermitEmptyPasswords no
+<% end -%>
# Change to no to disable s/key passwords
-#ChallengeResponseAuthentication yes
+<%- if real_sshd_challenge_response_authentication.to_s == 'yes' then %>
+ChallengeResponseAuthentication yes
+<%- else %>
ChallengeResponseAuthentication no
+<%- end %>
# Kerberos options
#KerberosAuthentication no
@@ -101,7 +151,13 @@ UsePAM no
AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
AcceptEnv LC_IDENTIFICATION LC_ALL
-#AllowTcpForwarding yes
+
+<%- if real_sshd_tcp_forwarding.to_s == 'yes' then %>
+AllowTcpForwarding yes
+<%- else %>
+AllowTcpForwarding no
+<%- end %>
+
#GatewayPorts no
#X11Forwarding no
<%- if real_sshd_x11_forwarding.to_s == 'yes' then %>
diff --git a/templates/sshd_config/Debian_etch.erb b/templates/sshd_config/Debian_etch.erb
new file mode 100644
index 0000000..09be201
--- /dev/null
+++ b/templates/sshd_config/Debian_etch.erb
@@ -0,0 +1,163 @@
+# Package generated configuration file
+# See the sshd(8) manpage for details
+
+# What ports, IPs and protocols we listen for
+<%- unless real_sshd_port.to_s.empty? then -%>
+Port <%= real_sshd_port -%>
+<%- else -%>
+Port 22
+<%- end -%>
+
+# Use these options to restrict which interfaces/protocols sshd will bind to
+<% for address in real_sshd_listen_address -%>
+ListenAddress <%= address %>
+<% end -%>
+Protocol 2
+# HostKeys for protocol version 2
+HostKey /etc/ssh/ssh_host_rsa_key
+HostKey /etc/ssh/ssh_host_dsa_key
+#Privilege Separation is turned on for security
+UsePrivilegeSeparation yes
+
+# ...but breaks Pam auth via kbdint, so we have to turn it off
+# Use PAM authentication via keyboard-interactive so PAM modules can
+# properly interface with the user (off due to PrivSep)
+#PAMAuthenticationViaKbdInt no
+# Lifetime and size of ephemeral version 1 server key
+KeyRegenerationInterval 3600
+ServerKeyBits 768
+
+# Logging
+SyslogFacility AUTH
+LogLevel INFO
+
+# Authentication:
+LoginGraceTime 600
+<%- unless real_sshd_permit_root_login.to_s.empty? then -%>
+PermitRootLogin <%= real_sshd_permit_root_login -%>
+<%- else -%>
+PermitRootLogin without-password
+<%- end -%>
+
+<%- if real_sshd_strict_modes.to_s == 'yes' then -%>
+StrictModes yes
+<%- else -%>
+StrictModes no
+<%- end -%>
+
+<%- if real_sshd_rsa_authentication.to_s == 'yes' then -%>
+RSAAuthentication yes
+<%- else -%>
+RSAAuthentication no
+<%- end -%>
+
+<%- if real_sshd_pubkey_authentication.to_s == 'yes' then -%>
+PubkeyAuthentication yes
+<%- else -%>
+PubkeyAuthentication no
+<%- end -%>
+
+<%- unless real_sshd_authorized_keys_file.to_s.empty? then -%>
+AuthorizedKeysFile <%= real_sshd_authorized_keys_file %>
+<%- else -%>
+AuthorizedKeysFile %h/.ssh/authorized_keys
+<%- end -%>
+
+# For this to work you will also need host keys in /etc/ssh_known_hosts
+<%- if real_sshd_rhosts_rsa_authentication.to_s == 'yes' then -%>
+RhostsRSAAuthentication yes
+<%- else -%>
+RhostsRSAAuthentication no
+<% end -%>
+
+# Don't read the user's ~/.rhosts and ~/.shosts files
+<%- if real_sshd_ignore_rhosts.to_s == 'yes' then -%>
+IgnoreRhosts yes
+<%- else -%>
+IgnoreRhosts no
+<% end -%>
+
+# similar for protocol version 2
+<%- if real_sshd_hostbased_authentication.to_s == 'yes' then -%>
+HostbasedAuthentication yes
+<%- else -%>
+HostbasedAuthentication no
+<% end -%>
+
+# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
+#IgnoreUserKnownHosts yes
+
+# To enable empty passwords, change to yes (NOT RECOMMENDED)
+<%- if real_sshd_permit_empty_passwords.to_s == 'yes' then -%>
+PermitEmptyPasswords yes
+<% else -%>
+PermitEmptyPasswords no
+<% end -%>
+
+# Change to no to disable s/key passwords
+<%- if real_sshd_challenge_response_authentication.to_s == 'yes' then -%>
+ChallengeResponseAuthentication yes
+<%- else -%>
+ChallengeResponseAuthentication no
+<%- end -%>
+
+# To disable tunneled clear text passwords, change to no here!
+<%- if real_sshd_password_authentication.to_s == 'yes' then -%>
+PasswordAuthentication yes
+<%- else -%>
+PasswordAuthentication no
+<%- end -%>
+
+# To change Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#AFSTokenPassing no
+#KerberosTicketCleanup no
+
+# Kerberos TGT Passing does only work with the AFS kaserver
+#KerberosTgtPassing yes
+
+<%- if real_sshd_x11_forwarding.to_s == 'yes' then -%>
+X11Forwarding yes
+<%- else -%>
+X11Forwarding no
+<%- end -%>
+X11DisplayOffset 10
+KeepAlive yes
+#UseLogin no
+
+#MaxStartups 10:30:60
+#Banner /etc/issue.net
+#ReverseMappingCheck yes
+
+#Subsystem sftp /usr/lib/sftp-server
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication. Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+<%- if real_sshd_use_pam.to_s == 'yes' then -%>
+UsePAM yes
+<%- else -%>
+UsePAM no
+<%- end -%>
+
+HostbasedUsesNameFromPacketOnly yes
+
+<%- if real_sshd_tcp_forwarding.to_s == 'yes' then -%>
+AllowTcpForwarding yes
+<%- else -%>
+AllowTcpForwarding no
+<%- end -%>
+
+ChallengeResponseAuthentication no
+
+<%- unless real_sshd_allowed_users.to_s.empty? then -%>
+AllowUsers <%= real_sshd_allowed_users -%>
+<%- end -%>
+
diff --git a/templates/sshd_config/Debian_lenny.erb b/templates/sshd_config/Debian_lenny.erb
new file mode 100644
index 0000000..bb39736
--- /dev/null
+++ b/templates/sshd_config/Debian_lenny.erb
@@ -0,0 +1,169 @@
+# Package generated configuration file
+# See the sshd(8) manpage for details
+
+# What ports, IPs and protocols we listen for
+<%- unless real_sshd_port.to_s.empty? then -%>
+Port <%= real_sshd_port -%>
+<%- else -%>
+Port 22
+<%- end -%>
+
+# Use these options to restrict which interfaces/protocols sshd will bind to
+<% for address in real_sshd_listen_address -%>
+ListenAddress <%= address %>
+<% end -%>
+Protocol 2
+# HostKeys for protocol version 2
+HostKey /etc/ssh/ssh_host_rsa_key
+HostKey /etc/ssh/ssh_host_dsa_key
+#Privilege Separation is turned on for security
+UsePrivilegeSeparation yes
+
+# ...but breaks Pam auth via kbdint, so we have to turn it off
+# Use PAM authentication via keyboard-interactive so PAM modules can
+# properly interface with the user (off due to PrivSep)
+#PAMAuthenticationViaKbdInt no
+# Lifetime and size of ephemeral version 1 server key
+KeyRegenerationInterval 3600
+ServerKeyBits 768
+
+# Logging
+SyslogFacility AUTH
+LogLevel INFO
+
+# Authentication:
+LoginGraceTime 600
+<%- unless real_sshd_permit_root_login.to_s.empty? then -%>
+PermitRootLogin <%= real_sshd_permit_root_login -%>
+<%- else -%>
+PermitRootLogin without-password
+<%- end -%>
+
+<%- if real_sshd_strict_modes.to_s == 'yes' then -%>
+StrictModes yes
+<%- else -%>
+StrictModes no
+<%- end -%>
+
+<%- if real_sshd_rsa_authentication.to_s == 'yes' then -%>
+RSAAuthentication yes
+<%- else -%>
+RSAAuthentication no
+<%- end -%>
+
+<%- if real_sshd_pubkey_authentication.to_s == 'yes' then -%>
+PubkeyAuthentication yes
+<%- else -%>
+PubkeyAuthentication no
+<%- end -%>
+
+<%- unless real_sshd_authorized_keys_file.to_s.empty? then -%>
+AuthorizedKeysFile <%= real_sshd_authorized_keys_file %>
+<%- else -%>
+AuthorizedKeysFile %h/.ssh/authorized_keys
+<%- end -%>
+
+# For this to work you will also need host keys in /etc/ssh_known_hosts
+<%- if real_sshd_rhosts_rsa_authentication.to_s == 'yes' then -%>
+RhostsRSAAuthentication yes
+<%- else -%>
+RhostsRSAAuthentication no
+<% end -%>
+
+# Don't read the user's ~/.rhosts and ~/.shosts files
+<%- if real_sshd_ignore_rhosts.to_s == 'yes' then -%>
+IgnoreRhosts yes
+<%- else -%>
+IgnoreRhosts no
+<% end -%>
+
+# similar for protocol version 2
+<%- if real_sshd_hostbased_authentication.to_s == 'yes' then -%>
+HostbasedAuthentication yes
+<%- else -%>
+HostbasedAuthentication no
+<% end -%>
+
+# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
+#IgnoreUserKnownHosts yes
+
+# To enable empty passwords, change to yes (NOT RECOMMENDED)
+<%- if real_sshd_permit_empty_passwords.to_s == 'yes' then -%>
+PermitEmptyPasswords yes
+<% else -%>
+PermitEmptyPasswords no
+<% end -%>
+
+# Change to no to disable s/key passwords
+<%- if real_sshd_challenge_response_authentication.to_s == 'yes' then -%>
+ChallengeResponseAuthentication yes
+<%- else -%>
+ChallengeResponseAuthentication no
+<%- end -%>
+
+# To disable tunneled clear text passwords, change to no here!
+<%- if real_sshd_password_authentication.to_s == 'yes' then -%>
+PasswordAuthentication yes
+<%- else -%>
+PasswordAuthentication no
+<%- end -%>
+
+# To change Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#AFSTokenPassing no
+#KerberosTicketCleanup no
+
+# Kerberos TGT Passing does only work with the AFS kaserver
+#KerberosTgtPassing yes
+
+<%- if real_sshd_x11_forwarding.to_s == 'yes' then -%>
+X11Forwarding yes
+<%- else -%>
+X11Forwarding no
+<%- end -%>
+X11DisplayOffset 10
+KeepAlive yes
+#UseLogin no
+
+#MaxStartups 10:30:60
+#Banner /etc/issue.net
+#ReverseMappingCheck yes
+
+#Subsystem sftp /usr/lib/sftp-server
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication. Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+<%- if real_sshd_use_pam.to_s == 'yes' then -%>
+UsePAM yes
+<%- else -%>
+UsePAM no
+<%- end -%>
+
+HostbasedUsesNameFromPacketOnly yes
+
+<%- if real_sshd_tcp_forwarding.to_s == 'yes' then -%>
+AllowTcpForwarding yes
+<%- else -%>
+AllowTcpForwarding no
+<%- end -%>
+
+<%- if real_sshd_agent_forwarding.to_s == 'yes' then -%>
+AllowAgentForwarding yes
+<%- else -%>
+AllowAgentForwarding no
+<%- end -%>
+
+ChallengeResponseAuthentication no
+
+<%- unless real_sshd_allowed_users.to_s.empty? then -%>
+AllowUsers <%= real_sshd_allowed_users -%>
+<%- end -%>
+
diff --git a/templates/sshd_config/Debian_normal.erb b/templates/sshd_config/Debian_normal.erb
deleted file mode 100644
index 70c1a34..0000000
--- a/templates/sshd_config/Debian_normal.erb
+++ /dev/null
@@ -1,102 +0,0 @@
-# Package generated configuration file
-# See the sshd(8) manpage for defails
-
-# What ports, IPs and protocols we listen for
-# Port 22
-# Use these options to restrict which interfaces/protocols sshd will bind to
-#ListenAddress ::
-#ListenAddress 0.0.0.0
-Protocol 2
-# HostKeys for protocol version 2
-HostKey /etc/ssh/ssh_host_rsa_key
-HostKey /etc/ssh/ssh_host_dsa_key
-#Privilege Separation is turned on for security
-UsePrivilegeSeparation yes
-
-# ...but breaks Pam auth via kbdint, so we have to turn it off
-# Use PAM authentication via keyboard-interactive so PAM modules can
-# properly interface with the user (off due to PrivSep)
-#PAMAuthenticationViaKbdInt no
-# Lifetime and size of ephemeral version 1 server key
-KeyRegenerationInterval 3600
-ServerKeyBits 768
-
-# Logging
-SyslogFacility AUTH
-LogLevel INFO
-
-# Authentication:
-LoginGraceTime 600
-<%- unless real_sshd_permit_root_login.to_s.empty? then %>
-PermitRootLogin <%= real_sshd_permit_root_login %>
-<%- else %>
-PermitRootLogin without-password
-<%- end %>
-StrictModes yes
-
-RSAAuthentication yes
-PubkeyAuthentication yes
-#AuthorizedKeysFile %h/.ssh/authorized_keys
-
-# rhosts authentication should not be used
-#RhostsAuthentication no
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts yes
-# For this to work you will also need host keys in /etc/ssh_known_hosts
-RhostsRSAAuthentication no
-# similar for protocol version 2
-HostbasedAuthentication no
-# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
-#IgnoreUserKnownHosts yes
-
-# To enable empty passwords, change to yes (NOT RECOMMENDED)
-PermitEmptyPasswords no
-
-# Uncomment to disable s/key passwords
-#ChallengeResponseAuthentication no
-
-# To disable tunneled clear text passwords, change to no here!
-<%- if real_sshd_password_authentication.to_s == 'yes' then %>
-PasswordAuthentication yes
-<%- else %>
-PasswordAuthentication no
-<%- end %>
-
-# To change Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#AFSTokenPassing no
-#KerberosTicketCleanup no
-
-# Kerberos TGT Passing does only work with the AFS kaserver
-#KerberosTgtPassing yes
-
-<%- if real_sshd_x11_forwarding.to_s == 'yes' then %>
-X11Forwarding yes
-<%- else %>
-X11Forwarding no
-<%- end %>
-X11DisplayOffset 10
-KeepAlive yes
-#UseLogin no
-
-#MaxStartups 10:30:60
-#Banner /etc/issue.net
-#ReverseMappingCheck yes
-
-#Subsystem sftp /usr/lib/sftp-server
-
-<%- if real_sshd_use_pam.to_s == 'yes' then %>
-UsePAM yes
-<%- else %>
-UsePAM no
-<%- end %>
-
-HostbasedUsesNameFromPacketOnly yes
-AllowTcpForwarding yes
-
-ChallengeResponseAuthentication no
-
-<%- unless real_sshd_allowed_users.to_s.empty? then %>
-AllowUsers <%= real_sshd_allowed_users %>
-<%- end %>
diff --git a/templates/sshd_config/Gentoo_normal.erb b/templates/sshd_config/Gentoo.erb
index aa98ae8..1b9b98e 100644
--- a/templates/sshd_config/Gentoo_normal.erb
+++ b/templates/sshd_config/Gentoo.erb
@@ -10,10 +10,17 @@
# possible, but leave them commented. Uncommented options change a
# default value.
-#Port 22
+<%- unless real_sshd_port.to_s.empty? then %>
+Port <%= real_sshd_port %>
+<%- else %>
+Port 22
+<%- end %>
+
+# Use these options to restrict which interfaces/protocols sshd will bind to
+<% for address in real_sshd_listen_address -%>
+ListenAddress <%= address %>
+<% end -%>
#AddressFamily any
-#ListenAddress 0.0.0.0
-#ListenAddress ::
# Disable legacy (protocol version 1) support in the server for new
# installations. In future the default will change to require explicit
@@ -39,7 +46,13 @@ Protocol 2
#LoginGraceTime 2m
PermitRootLogin without-password
-#StrictModes yes
+
+<%- if real_sshd_strict_modes.to_s == 'yes' then %>
+StrictModes yes
+<%- else %>
+StrictModes no
+<%- end %>
+
<%- unless real_sshd_permit_root_login.to_s.empty? then %>
PermitRootLogin <%= real_sshd_permit_root_login %>
<%- else %>
@@ -47,19 +60,48 @@ PermitRootLogin without-password
<%- end %>
#MaxAuthTries 6
-#RSAAuthentication yes
-#PubkeyAuthentication yes
-#AuthorizedKeysFile .ssh/authorized_keys
+<%- if real_sshd_rsa_authentication.to_s == 'yes' then %>
+RSAAuthentication yes
+<%- else %>
+RSAAuthentication no
+<%- end %>
+
+<%- if real_sshd_pubkey_authentication.to_s == 'yes' then %>
+PubkeyAuthentication yes
+<%- else %>
+PubkeyAuthentication no
+<%- end %>
+
+<%- unless real_sshd_authorized_keys_file.to_s.empty? then %>
+AuthorizedKeysFile <%= real_sshd_authorized_keys_file %>
+<%- else %>
+AuthorizedKeysFile %h/.ssh/authorized_keys
+<%- end %>
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#RhostsRSAAuthentication no
+<%- if real_sshd_rhosts_rsa_authentication.to_s == 'yes' then %>
+RhostsRSAAuthentication yes
+<%- else %>
+RhostsRSAAuthentication no
+<% end -%>
+
# similar for protocol version 2
-#HostbasedAuthentication no
+<%- if real_sshd_hostbased_authentication.to_s == 'yes' then %>
+HostbasedAuthentication yes
+<%- else %>
+HostbasedAuthentication no
+<% end -%>
+
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
+
# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
+<%- if real_sshd_ignore_rhosts.to_s == 'yes' then %>
+IgnoreRhosts yes
+<%- else %>
+IgnoreRhosts no
+<% end -%>
# To disable tunneled clear text passwords, change to no here!
<%- if real_sshd_password_authentication.to_s == 'yes' then %>
@@ -67,10 +109,20 @@ PasswordAuthentication yes
<%- else %>
PasswordAuthentication no
<%- end %>
-#PermitEmptyPasswords no
+
+# To enable empty passwords, change to yes (NOT RECOMMENDED)
+<%- if real_sshd_permit_empty_passwords.to_s == 'yes' then %>
+PermitEmptyPasswords yes
+<% else -%>
+PermitEmptyPasswords no
+<% end -%>
# Change to no to disable s/key passwords
-#ChallengeResponseAuthentication yes
+<%- if real_sshd_challenge_response_authentication.to_s == 'yes' then %>
+ChallengeResponseAuthentication yes
+<%- else %>
+ChallengeResponseAuthentication no
+<%- end %>
# Kerberos options
#KerberosAuthentication no
@@ -99,7 +151,12 @@ UsePAM yes
UsePAM no
<%- end %>
-#AllowTcpForwarding yes
+<%- if real_sshd_tcp_forwarding.to_s == 'yes' then %>
+AllowTcpForwarding yes
+<%- else %>
+AllowTcpForwarding no
+<%- end %>
+
#GatewayPorts no
<%- if real_sshd_x11_forwarding.to_s == 'yes' then %>
X11Forwarding yes
diff --git a/templates/sshd_config/OpenBSD_normal.erb b/templates/sshd_config/OpenBSD.erb
index 0b84d25..32f6780 100644
--- a/templates/sshd_config/OpenBSD_normal.erb
+++ b/templates/sshd_config/OpenBSD.erb
@@ -8,11 +8,18 @@
# possible, but leave them commented. Uncommented options change a
# default value.
-#Port 22
+<%- unless real_sshd_port.to_s.empty? then %>
+Port <%= real_sshd_port %>
+<%- else %>
+Port 22
+<%- end %>
+
+# Use these options to restrict which interfaces/protocols sshd will bind to
+<% for address in real_sshd_listen_address -%>
+ListenAddress <%= address %>
+<% end -%>
#Protocol 2,1
#AddressFamily any
-#ListenAddress 0.0.0.0
-#ListenAddress ::
# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
@@ -37,22 +44,57 @@ PermitRootLogin <%= real_sshd_permit_root_login %>
<%- else %>
PermitRootLogin without-password
<%- end %>
-#StrictModes yes
+
+<%- if real_sshd_strict_modes.to_s == 'yes' then %>
+StrictModes yes
+<%- else %>
+StrictModes no
+<%- end %>
+
#MaxAuthTries 6
-#RSAAuthentication yes
-#PubkeyAuthentication yes
-#AuthorizedKeysFile .ssh/authorized_keys
+<%- if real_sshd_rsa_authentication.to_s == 'yes' then %>
+RSAAuthentication yes
+<%- else %>
+RSAAuthentication no
+<%- end %>
+
+<%- if real_sshd_pubkey_authentication.to_s == 'yes' then %>
+PubkeyAuthentication yes
+<%- else %>
+PubkeyAuthentication no
+<%- end %>
+
+<%- unless real_sshd_authorized_keys_file.to_s.empty? then %>
+AuthorizedKeysFile <%= real_sshd_authorized_keys_file %>
+<%- else %>
+AuthorizedKeysFile %h/.ssh/authorized_keys
+<%- end %>
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-#RhostsRSAAuthentication no
+<%- if real_sshd_rhosts_rsa_authentication.to_s == 'yes' then %>
+RhostsRSAAuthentication yes
+<%- else %>
+RhostsRSAAuthentication no
+<% end -%>
+
# similar for protocol version 2
-#HostbasedAuthentication no
+<%- if real_sshd_hostbased_authentication.to_s == 'yes' then %>
+HostbasedAuthentication yes
+<%- else %>
+HostbasedAuthentication no
+<% end -%>
+
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
+
# Don't read the user's ~/.rhosts and ~/.shosts files
-#IgnoreRhosts yes
+<%- if real_sshd_ignore_rhosts.to_s == 'yes' then %>
+IgnoreRhosts yes
+<%- else %>
+IgnoreRhosts no
+<% end -%>
# To disable tunneled clear text passwords, change to no here!
<%- if real_sshd_password_authentication.to_s == 'yes' then %>
@@ -60,10 +102,20 @@ PasswordAuthentication yes
<%- else %>
PasswordAuthentication no
<%- end %>
-#PermitEmptyPasswords no
+
+# To enable empty passwords, change to yes (NOT RECOMMENDED)
+<%- if real_sshd_permit_empty_passwords.to_s == 'yes' then %>
+PermitEmptyPasswords yes
+<% else -%>
+PermitEmptyPasswords no
+<% end -%>
# Change to no to disable s/key passwords
-#ChallengeResponseAuthentication yes
+<%- if real_sshd_challenge_response_authentication.to_s == 'yes' then %>
+ChallengeResponseAuthentication yes
+<%- else %>
+ChallengeResponseAuthentication no
+<%- end %>
# Kerberos options
#KerberosAuthentication no
@@ -75,7 +127,12 @@ PasswordAuthentication no
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
-#AllowTcpForwarding yes
+<%- if real_sshd_tcp_forwarding.to_s == 'yes' then %>
+AllowTcpForwarding yes
+<%- else %>
+AllowTcpForwarding no
+<%- end %>
+
#GatewayPorts no
<%- if real_sshd_x11_forwarding.to_s == 'yes' then %>
X11Forwarding yes