aboutsummaryrefslogtreecommitdiff
path: root/templates/sshd_config/Gentoo.erb
diff options
context:
space:
mode:
Diffstat (limited to 'templates/sshd_config/Gentoo.erb')
-rw-r--r--templates/sshd_config/Gentoo.erb136
1 files changed, 38 insertions, 98 deletions
diff --git a/templates/sshd_config/Gentoo.erb b/templates/sshd_config/Gentoo.erb
index 8581804..1cb4522 100644
--- a/templates/sshd_config/Gentoo.erb
+++ b/templates/sshd_config/Gentoo.erb
@@ -10,20 +10,20 @@
# possible, but leave them commented. Uncommented options change a
# default value.
-<%- unless sshd_head_additional_options.to_s.empty? then %>
-<%= sshd_head_additional_options %>
-<%- end %>
+<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%>
+<%= s %>
+<% end -%>
-<%- sshd_ports.each do |port| -%>
-<%- if port.to_s == 'off' then -%>
+<% scope.lookupvar('sshd::ports').to_a.each do |port| -%>
+<% if port == 'off' -%>
#Port -- disabled by puppet
<% else -%>
Port <%= port %>
<% end -%>
-<%- end -%>
+<% end -%>
# Use these options to restrict which interfaces/protocols sshd will bind to
-<% for address in sshd_listen_address -%>
+<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%>
ListenAddress <%= address %>
<% end -%>
#AddressFamily any
@@ -51,84 +51,39 @@ Protocol 2
# Authentication:
#LoginGraceTime 2m
-PermitRootLogin without-password
-
-<%- if sshd_strict_modes.to_s == 'yes' then %>
-StrictModes yes
-<%- else %>
-StrictModes no
-<%- end %>
-
-<%- unless sshd_permit_root_login.to_s.empty? then %>
-PermitRootLogin <%= sshd_permit_root_login %>
-<%- else %>
-PermitRootLogin without-password
-<%- end %>
+PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %>
+
+StrictModes <%= scope.lookupvar('sshd::strict_modes') %>
+
#MaxAuthTries 6
-<%- if sshd_rsa_authentication.to_s == 'yes' then %>
-RSAAuthentication yes
-<%- else %>
-RSAAuthentication no
-<%- end %>
+RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %>
-<%- if sshd_pubkey_authentication.to_s == 'yes' then %>
-PubkeyAuthentication yes
-<%- else %>
-PubkeyAuthentication no
-<%- end %>
+PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %>
-<%- unless sshd_authorized_keys_file.to_s.empty? then %>
-AuthorizedKeysFile <%= sshd_authorized_keys_file %>
-<%- else %>
-AuthorizedKeysFile %h/.ssh/authorized_keys
-<%- end %>
+AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %>
# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-<%- if sshd_rhosts_rsa_authentication.to_s == 'yes' then %>
-RhostsRSAAuthentication yes
-<%- else %>
-RhostsRSAAuthentication no
-<% end -%>
+RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %>
# similar for protocol version 2
-<%- if sshd_hostbased_authentication.to_s == 'yes' then %>
-HostbasedAuthentication yes
-<%- else %>
-HostbasedAuthentication no
-<% end -%>
+HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %>
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
-<%- if sshd_ignore_rhosts.to_s == 'yes' then %>
-IgnoreRhosts yes
-<%- else %>
-IgnoreRhosts no
-<% end -%>
+IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %>
# To disable tunneled clear text passwords, change to no here!
-<%- if sshd_password_authentication.to_s == 'yes' then %>
-PasswordAuthentication yes
-<%- else %>
-PasswordAuthentication no
-<%- end %>
+PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %>
# To enable empty passwords, change to yes (NOT RECOMMENDED)
-<%- if sshd_permit_empty_passwords.to_s == 'yes' then %>
-PermitEmptyPasswords yes
-<% else -%>
-PermitEmptyPasswords no
-<% end -%>
+PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %>
# Change to no to disable s/key passwords
-<%- if sshd_challenge_response_authentication.to_s == 'yes' then %>
-ChallengeResponseAuthentication yes
-<%- else %>
-ChallengeResponseAuthentication no
-<%- end %>
+ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %>
# Kerberos options
#KerberosAuthentication no
@@ -151,27 +106,15 @@ ChallengeResponseAuthentication no
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
-<%- if sshd_use_pam.to_s == 'yes' then %>
-UsePAM yes
-<%- else %>
-UsePAM no
-<%- end %>
-
-<%- if sshd_tcp_forwarding.to_s == 'yes' then %>
-AllowTcpForwarding yes
-<%- else %>
-AllowTcpForwarding no
-<%- end %>
+UsePAM <%= scope.lookupvar('sshd::use_pam') %>
+
+AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %>
#GatewayPorts no
-<%- if sshd_x11_forwarding.to_s == 'yes' then %>
-X11Forwarding yes
-<%- else %>
-X11Forwarding no
-<%- end %>
+X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %>
#X11DisplayOffset 10
#X11UseLocalhost yes
-PrintMotd <%= sshd_print_motd %>
+PrintMotd <%= scope.lookupvar('sshd::print_motd') %>
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
@@ -189,11 +132,7 @@ PrintMotd <%= sshd_print_motd %>
#Banner /some/path
# override default of no subsystems
-<%- if sshd_sftp_subsystem.to_s.empty? then %>
-Subsystem sftp /usr/lib/misc/sftp-server
-<%- else %>
-Subsystem sftp <%= sshd_sftp_subsystem %>
-<%- end %>
+Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/lib/misc/sftp-server' : s %>
# Example of overriding settings on a per-user basis
#Match User anoncvs
@@ -201,18 +140,19 @@ Subsystem sftp <%= sshd_sftp_subsystem %>
# AllowTcpForwarding no
# ForceCommand cvs server
-<%- unless sshd_allowed_users.to_s.empty? then %>
-AllowUsers <%= sshd_allowed_users %>
-<%- end %>
-<%- unless sshd_allowed_groups.to_s.empty? then %>
-AllowGroups <%= sshd_allowed_groups %>
-<%- end %>
+<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%>
+AllowUsers <%= s %>
+<% end -%>
+<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%>
+AllowGroups <%= s %>
+<%- end -%>
-<%- if sshd_hardened_ssl.to_s == 'yes' then -%>
+<% if scope.lookupvar('sshd::hardened_ssl') == 'yes' -%>
Ciphers aes256-ctr
MACs hmac-sha1
-<%- end -%>
+<% end -%>
+
+<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%>
+<%= s %>
+<% end -%>
-<%- unless sshd_tail_additional_options.to_s.empty? then %>
-<%= sshd_tail_additional_options %>
-<%- end %>