aboutsummaryrefslogtreecommitdiff
path: root/templates/sshd_config/CentOS.erb
diff options
context:
space:
mode:
Diffstat (limited to 'templates/sshd_config/CentOS.erb')
-rw-r--r--templates/sshd_config/CentOS.erb192
1 files changed, 192 insertions, 0 deletions
diff --git a/templates/sshd_config/CentOS.erb b/templates/sshd_config/CentOS.erb
new file mode 100644
index 0000000..6a16d77
--- /dev/null
+++ b/templates/sshd_config/CentOS.erb
@@ -0,0 +1,192 @@
+# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
+
+# This is the sshd server system-wide configuration file. See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented. Uncommented options change a
+# default value.
+
+<%- unless real_sshd_port.to_s.empty? then %>
+Port <%= real_sshd_port %>
+<%- else %>
+Port 22
+<%- end %>
+
+# Use these options to restrict which interfaces/protocols sshd will bind to
+<% for address in real_sshd_listen_address -%>
+ListenAddress <%= address %>
+<% end -%>
+#AddressFamily any
+#Protocol 2,1
+Protocol 2
+# HostKey for protocol version 1
+#HostKey /etc/ssh/ssh_host_key
+# HostKeys for protocol version 2
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_dsa_key
+
+# Lifetime and size of ephemeral version 1 server key
+#KeyRegenerationInterval 1h
+#ServerKeyBits 768
+
+# Logging
+# obsoletes QuietMode and FascistLogging
+#SyslogFacility AUTH
+SyslogFacility AUTHPRIV
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+<%- unless real_sshd_permit_root_login.to_s.empty? then %>
+PermitRootLogin <%= real_sshd_permit_root_login %>
+<%- else %>
+PermitRootLogin without-password
+<%- end %>
+
+<%- if real_sshd_strict_modes.to_s == 'yes' then %>
+StrictModes yes
+<%- else %>
+StrictModes no
+<%- end %>
+
+#MaxAuthTries 6
+
+<%- if real_sshd_rsa_authentication.to_s == 'yes' then %>
+RSAAuthentication yes
+<%- else %>
+RSAAuthentication no
+<%- end %>
+
+<%- if real_sshd_pubkey_authentication.to_s == 'yes' then %>
+PubkeyAuthentication yes
+<%- else %>
+PubkeyAuthentication no
+<%- end %>
+
+<%- unless real_sshd_authorized_keys_file.to_s.empty? then %>
+AuthorizedKeysFile <%= real_sshd_authorized_keys_file %>
+<%- else %>
+AuthorizedKeysFile %h/.ssh/authorized_keys
+<%- end %>
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+<%- if real_sshd_rhosts_rsa_authentication.to_s == 'yes' then %>
+RhostsRSAAuthentication yes
+<%- else %>
+RhostsRSAAuthentication no
+<% end -%>
+
+# similar for protocol version 2
+<%- if real_sshd_hostbased_authentication.to_s == 'yes' then %>
+HostbasedAuthentication yes
+<%- else %>
+HostbasedAuthentication no
+<% end -%>
+
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# RhostsRSAAuthentication and HostbasedAuthentication
+#IgnoreUserKnownHosts no
+
+# Don't read the user's ~/.rhosts and ~/.shosts files
+<%- if real_sshd_ignore_rhosts.to_s == 'yes' then %>
+IgnoreRhosts yes
+<%- else %>
+IgnoreRhosts no
+<% end -%>
+
+# To disable tunneled clear text passwords, change to no here!
+<%- if real_sshd_password_authentication.to_s == 'yes' then %>
+PasswordAuthentication yes
+<%- else %>
+PasswordAuthentication no
+<%- end %>
+
+# To enable empty passwords, change to yes (NOT RECOMMENDED)
+<%- if real_sshd_permit_empty_passwords.to_s == 'yes' then %>
+PermitEmptyPasswords yes
+<% else -%>
+PermitEmptyPasswords no
+<% end -%>
+
+# Change to no to disable s/key passwords
+<%- if real_sshd_challenge_response_authentication.to_s == 'yes' then %>
+ChallengeResponseAuthentication yes
+<%- else %>
+ChallengeResponseAuthentication no
+<%- end %>
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+GSSAPIAuthentication yes
+#GSSAPICleanupCredentials yes
+GSSAPICleanupCredentials yes
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication mechanism.
+# Depending on your PAM configuration, this may bypass the setting of
+# PasswordAuthentication, PermitEmptyPasswords, and
+# "PermitRootLogin without-password". If you just want the PAM account and
+# session checks to run without PAM authentication, then enable this but set
+# ChallengeResponseAuthentication=no
+#UsePAM no
+<%- if real_sshd_use_pam.to_s == 'yes' then %>
+UsePAM yes
+<%- else %>
+UsePAM no
+<%- end %>
+
+# Accept locale-related environment variables
+AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+AcceptEnv LC_IDENTIFICATION LC_ALL
+
+<%- if real_sshd_tcp_forwarding.to_s == 'yes' then %>
+AllowTcpForwarding yes
+<%- else %>
+AllowTcpForwarding no
+<%- end %>
+
+#GatewayPorts no
+#X11Forwarding no
+<%- if real_sshd_x11_forwarding.to_s == 'yes' then %>
+X11Forwarding yes
+<%- else %>
+X11Forwarding no
+<%- end %>
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#UseLogin no
+#UsePrivilegeSeparation yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#ShowPatchLevel no
+#UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10
+#PermitTunnel no
+
+# no default banner path
+#Banner /some/path
+
+# override default of no subsystems
+Subsystem sftp /usr/libexec/openssh/sftp-server
+<%- unless real_sshd_allowed_users.to_s.empty? then %>
+AllowUsers <%= real_sshd_allowed_users %>
+<%- end %>