Merge branch 'master' of https://gitlab.com/shared-puppet-modules-group/sshd

Conflicts:
	README
	templates/sshd_config/CentOS.erb
	templates/sshd_config/CentOS_Final.erb
	templates/sshd_config/Debian_etch.erb
	templates/sshd_config/Debian_jessie.erb
	templates/sshd_config/Debian_sid.erb
	templates/sshd_config/Debian_squeeze.erb
	templates/sshd_config/Debian_wheezy.erb
	templates/sshd_config/Ubuntu_trusty.erb

1 files changed, 0 insertions, 246 deletions

diff --git a/README b/README
deleted file mode 100644
index a5a00af..0000000
--- a/README
+++ /dev/null
@@ -1,246 +0,0 @@
-Introduction
-============
-
-This puppet module manages OpenSSH configuration and services.
-
-!! Upgrade Notice (01/2013) !!
-
-This module now uses parameterized classes, where it used global variables
-before. So please whatch out before pulling, you need to change the 
-class declarations in your manifest !
-
-
-Dependencies
-------------
-
-This module requires puppet => 2.6, and the following modules are required
-pre-dependencies:
-
-- shared-common: git://labs.riseup.net/shared-common
-- shared-lsb: git://labs.riseup.net/shared-lsb
-
-OpenSSH Server
-==============
-
-On a node where you wish to have an openssh server installed, you should
-'include sshd' on that node. If you need to configure any aspects of
-sshd_config, set the variables before the include. See 'Configurable Variables'
-below for what you can set.
-
-Nagios
-------
-
-To have nagios checks setup automatically for sshd services, simply set
-manage_nagios to true for that class. If you want to disable ssh
-nagios checking for a particular node (such as when ssh is firewalled), then you
-can set the class parameter nagios_check_ssh to false and that node will not bei
-monitored.  
-
-Nagios will automatically check the ports defined in $sshd::ports, and the
-hostname specified by $nagios_check_ssh_hostname.
-
-NOTE: this requires that you are using the shared-nagios puppet module which
-supports the nagios native types via nagios::service:
-git://labs.riseup.net/shared-nagios
-
-Firewall
---------
-
-If you wish to have firewall rules setup automatically for you, using shorewall,
-you will need to set: $use_shorewall = true. The $sshd_ports that you have
-specified will automatically be used.
-
-NOTE: This requires that you are using the shared-shorewall puppet module:
-git://labs.riseup.net/shared-shorewall
-
-
-Configurable variables
-----------------------
-
-Configuration of sshd is strict, and may not fit all needs, however there are a
-number of variables that you can consider configuring. The defaults are set to
-the distribution shipped sshd_config file defaults. 
-
-To set any of these variables, simply set them as variables in your manifests,
-before the class is included, for example:
-
- $sshd_listen_address = ['10.0.0.1 192.168.0.1']
- $sshd_use_pam = yes
- include sshd
-
-If you need to install a version of the ssh daemon or client package other than
-the default one that would be installed by 'ensure => installed', then you can
-set the following variables:
-
- $sshd_ensure_version = "1:5.2p2-6"
- $ssh_ensure_version = "1:5.2p2-6"
-
-The following is a list of the currently available variables:
-
- $sshd_listen_address
-    specify the addresses sshd should listen on set this to ['10.0.0.1
-    192.168.0.1'] to have it listen on both addresses, or leave it unset to
-    listen on all Default: empty -> results in listening on 0.0.0.0
-
- $sshd_allowed_users
-    list of usernames separated by spaces.  set this for example to "foobar
-    root" to ensure that only user foobar and root might login.  Default: empty
-    -> no restriction is set
-
- $sshd_allowed_groups 
-    list of groups separated by spaces. set this for example to "wheel sftponly"
-    to ensure that only users in the groups wheel and sftponly might login.
-    Default: empty -> no restriction is set Note: This is set after
-    sshd_allowed_users, take care of the behaviour if you use these 2 options
-    together.
- 
- $sshd_use_pam
-    if you want to use pam or not for authenticaton. Values: no or yes; Default:
-    no
-
- $sshd_permit_root_login
-    If you want to allow root logins or not. Valid values: yes, no,
-    without-password, forced-commands-only; Default: without-password
-
- $sshd_password_authentication 
-    If you want to enable password authentication or not. Valid values: yes or
-    no; Default: no
-
- $sshd_kerberos_authentication 
-    If you want the password that is provided by the user to be validated
-    through the Kerberos KDC. To use this option the server needs a Kerberos
-    servtab which allows the verification of the KDC's identity. Valid values:
-    yes or no; Default: no
-
- $sshd_kerberos_orlocalpasswd  
-    If password authentication through Kerberos fails, then the password will be
-    validated via any additional local mechanism.  Valid values: yes or no;
-    Default: yes
-
- $sshd_kerberos_ticketcleanup
-    Destroy the user's ticket cache file on logout?  Valid values: yes or no;
-    Default: yes
-
- $sshd_gssapi_authentication
-    Authenticate users based on GSSAPI? Valid values: yes or no; Default: no
-
- $sshd_gssapi_cleanupcredentials
-    Destroy user's credential cache on logout? Valid values: yes or no; Default:
-    yes
-
- $sshd_challenge_response_authentication
-    If you want to enable ChallengeResponseAuthentication or not When disabled,
-    s/key passowords are disabled Valid values: yes or no; Default: no
- 
- $sshd_tcp_forwarding
-    If you want to enable TcpForwarding. Valid Values: yes or no; Default: no
-
- $sshd_x11_forwarding
-    If you want to enable x11 forwarding. Valid Values: yes or no; Default: no
-
- $sshd_agent_forwarding	
-    If you want to allow ssh-agent forwarding. Valid Values: yes or no; Default:
-    no
-
- $sshd_pubkey_authentication
-    If you want to enable public key authentication. Valid Values: yes or no;
-    Default: yes
-
- $sshd_rsa_authentication 
-    If you want to enable RSA Authentication. Valid Values: yes or no; Default:
-    no
-				
- $sshd_rhosts_rsa_authentication
-    If you want to enable rhosts RSA Authentication. Valid Values: yes or no;
-    Default: no
-
- $sshd_hostbased_authentication 
-    If you want to enable HostbasedAuthentication. Valid Values: yes or no;
-    Default: no
-				
- $sshd_strict_modes		
-    If you want to set StrictModes (check file modes/ownership before accepting
-    login). Valid Values: yes or no; Default: yes
-
- $sshd_permit_empty_passwords
-    If you want enable PermitEmptyPasswords to allow empty passwords. Valid
-    Values: yes or no; Default: no
-
- $sshd_port   
-    Deprecated, use sshd_ports instead.
-
- $sshd_ports
-    If you want to specify a list of ports other than the default 22; Default:
-    [22]
-
- $sshd_authorized_keys_file
-    Set this to the location of the AuthorizedKeysFile
-    (e.g. /etc/ssh/authorized_keys/%u). Default: AuthorizedKeysFile
-    %h/.ssh/authorized_keys
-
- $sshd_hardened_ssl
-    Use only strong SSL ciphers and MAC.
-    Values: no or yes; Default: no.
-
- $sshd_print_motd
-    Show the Message of the day when a user logs in.
-
- $sshd_sftp_subsystem
-    Set a different sftp-subystem than the default one. Might be interesting for
-    sftponly usage. Default: empty -> no change of the default
-
- $sshd_head_additional_options  
-    Set this to any additional sshd_options which aren't listed above. Anything
-    set here will be added to the beginning of the sshd_config file. This option
-    might be useful to define complicated Match Blocks. This string is going to
-    be included, like it is defined. So take care! Default: empty -> not added.
-
- $sshd_tail_additional_options  
-
-    Set this to any additional sshd_options which aren't listed above. Anything
-    set here will be added to the end of the sshd_config file. This option might
-    be useful to define complicated Match Blocks. This string is going to be
-    included, like it is defined. So take care! Default: empty -> not added.
-
- $sshd_shared_ip
-    Whether the server uses a shared network IP address. If it does, then we
-    don't want it to export an rsa key for its IP address.
-    Values: no or yes; Default: no
-
-
-Defines and functions
----------------------
-
-Deploy authorized_keys file with the define sshd::ssh_authorized_key.
-
-Generate a public/private keypair with the ssh_keygen function. For example, the
-following will generate ssh keys and put the different parts of the key into
-variables:
-
-$ssh_keys = ssh_keygen("${$ssh_key_basepath}/backup/keys/${::fqdn}/${backup_host}")
-$public_key = split($ssh_keys[1],' ')
-$sshkey_type => $public_key[0]
-$sshkey => $public_key[1]
-
-
-Client
-======
-
-On a node where you wish to have the ssh client managed, you can do 'include
-sshd::client' in the node definition. This will install the appropriate package.
-
-
-License
-=======
-
-# Copyright 2008-2011, Riseup Labs micah@riseup.net
-# Copyright 2008, admin(at)immerda.ch
-# Copyright 2008, Puzzle ITC GmbH
-# Marcel Haerry haerry+puppet(at)puzzle.ch
-# Simon Josi josi+puppet(at)puzzle.ch
-#
-# This program is free software; you can redistribute 
-# it and/or modify it under the terms of the GNU 
-# General Public License version 3 as published by 
-# the Free Software Foundation.
-#