aboutsummaryrefslogtreecommitdiff
path: root/manifests
diff options
context:
space:
mode:
Diffstat (limited to 'manifests')
-rw-r--r--manifests/defines/concatenated_file.pp123
-rw-r--r--manifests/defines/config_file.pp55
-rw-r--r--manifests/defines/line.pp54
-rw-r--r--manifests/defines/link.pp12
-rw-r--r--manifests/defines/module_dir.pp50
-rw-r--r--manifests/defines/module_file.pp47
-rw-r--r--manifests/defines/replace.pp40
-rw-r--r--manifests/init.pp6
-rw-r--r--manifests/module_dir.pp34
-rw-r--r--manifests/module_file.pp37
-rw-r--r--manifests/moduledir.pp27
-rw-r--r--manifests/moduledir/common.pp3
-rw-r--r--manifests/moduledir/common/cf.pp4
13 files changed, 88 insertions, 404 deletions
diff --git a/manifests/defines/concatenated_file.pp b/manifests/defines/concatenated_file.pp
deleted file mode 100644
index 5f1c275..0000000
--- a/manifests/defines/concatenated_file.pp
+++ /dev/null
@@ -1,123 +0,0 @@
-# common/manifests/defines/concatenated_file.pp -- create a file from snippets
-# stored in a directory
-#
-# Copyright (C) 2007 David Schmitt <david@schmitt.edv-bus.at>
-# See LICENSE for the full license granted to you.
-
-# TODO:
-# * create the directory in _part too
-
-# This resource collects file snippets from a directory ($dir) and concatenates
-# them in lexical order of their names into a new file ($name). This can be
-# used to collect information from disparate sources, when the target file
-# format doesn't allow includes.
-#
-# concatenated_file_part can be used to easily configure content for this.
-#
-# If no $dir is specified, the target name with '.d' appended will be used.
-#
-# The $dir is purged by puppet and will only contain explicitely configured
-# files. This can be overridden by defining the directory before the
-# concatenated_file.
-#
-# Depend on File[$name] to change if and only if its contents change. Notify
-# Exec["concat_${name}"] if you want to force an update.
-#
-# Usage:
-# concatenated_file { "/etc/some.conf":
-# dir => "/etc/some.conf.d",
-# }
-define concatenated_file (
- $ensure = 'present',
- # where the snippets are located
- $dir = '',
- # a file with content to prepend
- $header = '',
- # a file with content to append
- $footer = '',
- # default permissions for the target file
- $mode = 0644, $owner = root, $group = 0
- )
-{
- include common::moduledir::common::cf
-
- $dir_real = $dir ? { '' => "${name}.d", default => $dir }
-
- $tmp_file_name = regsubst($dir_real, '/', '_', 'G')
- $tmp_file = "${common::moduledir::module_dir_path}/${tmp_file_name}"
-
- if defined(File[$dir_real]) {
- debug("${dir_real} already defined")
- } else {
- file {
- $dir_real:
- ensure => $ensure ? {
- 'present' => directory,
- default => $ensure
- },
- source => "puppet:///modules/common/empty",
- checksum => mtime,
- ignore => '.ignore',
- recurse => true, purge => true, force => true,
- mode => $mode, owner => $owner, group => $group,
- notify => Exec["concat_${name}"];
- }
- }
-
- file {
- $tmp_file:
- ensure => $ensure, checksum => md5,
- mode => $mode, owner => $owner, group => $group;
- # decouple the actual file from the generation process by using a
- # temporary file and puppet's source mechanism. This ensures that events
- # for notify/subscribe will only be generated when there is an actual
- # change.
- $name:
- ensure => $ensure, checksum => md5,
- source => $tmp_file,
- mode => $mode, owner => $owner, group => $group,
- require => File[$tmp_file];
- }
-
- if $ensure == 'present' {
- # if there is a header or footer file, add it
- $additional_cmd = $header ? {
- '' => $footer ? {
- '' => '',
- default => "| cat - '${footer}' "
- },
- default => $footer ? {
- '' => "| cat '${header}' - ",
- default => "| cat '${header}' - '${footer}' "
- }
- }
-
- # use >| to force clobbering the target file
- exec { "concat_${name}":
- command => "/usr/bin/find ${dir_real} -maxdepth 1 -type f ! -name '*puppettmp' -print0 | sort -z | xargs -0 cat ${additional_cmd} >| ${tmp_file}",
- subscribe => [ File[$dir_real] ],
- before => File[$tmp_file],
- alias => [ "concat_${dir_real}"],
- loglevel => info
- }
- }
-}
-
-
-# Add a snippet called $name to the concatenated_file at $dir.
-# The file can be referenced as File["cf_part_${name}"]
-define concatenated_file_part (
- $dir, $content = '', $ensure = present,
- $mode = 0644, $owner = root, $group = 0
- )
-{
-
- file { "${dir}/${name}":
- ensure => $ensure, content => $content,
- mode => $mode, owner => $owner, group => $group,
- alias => "cf_part_${name}",
- notify => Exec["concat_${dir}"],
- }
-
-}
-
diff --git a/manifests/defines/config_file.pp b/manifests/defines/config_file.pp
deleted file mode 100644
index 2be2460..0000000
--- a/manifests/defines/config_file.pp
+++ /dev/null
@@ -1,55 +0,0 @@
-# common/manifests/defines/config_file.pp -- create a config file with default permissions
-# Copyright (C) 2007 David Schmitt <david@schmitt.edv-bus.at>
-# See LICENSE for the full license granted to you.
-
-# A simple wrapper to give all configuration files common defaults.
-#
-# Usage:
-# config_file { filename:
-# content => "....\n",
-# }
-#
-# Examples:
-#
-# To create the file /etc/vservers/${vs_name}/context with specific
-# content:
-#
-# config_file { "/etc/vservers/${vs_name}/context":
-# content => "${context}\n",
-# notify => Exec["vs_restart_${vs_name}"],
-# require => Exec["vs_create_${vs_name}"];
-# }
-#
-# To create the file /etc/apache2/sites-available/munin-stats with the
-# content pulled from a template:
-#
-# config_file { "/etc/apache2/sites-available/munin-stats":
-# content => template("apache/munin-stats"),
-# require => Package["apache2"],
-# notify => Exec["reload-apache2"]
-# }
-
-define config_file ($content = '', $source = '', $ensure = 'present') {
- file { $name:
- ensure => $ensure,
- # keep old versions on the server
- backup => puppet,
- # default permissions for config files
- mode => 0644, owner => root, group => 0,
- # really detect changes to this file
- checksum => md5,
- }
-
- case $source {
- '': { }
- default: { File[$name] { source => $source } }
- }
-
- case $content {
- '': { }
- default: { File[$name] { content => $content } }
- }
-
-}
-
-
diff --git a/manifests/defines/line.pp b/manifests/defines/line.pp
deleted file mode 100644
index 44c52a0..0000000
--- a/manifests/defines/line.pp
+++ /dev/null
@@ -1,54 +0,0 @@
-# common/manifests/defines/line.pp -- a trivial mechanism to ensure a line exists in a file
-# Copyright (C) 2007 David Schmitt <david@schmitt.edv-bus.at>
-# See LICENSE for the full license granted to you.
-
-# Ensures that a specific line is present or absent in a file. This can
-# be very brittle, since even small changes can throw this off.
-#
-# If the line is not present yet, it will be appended to the file.
-#
-# The name of the define is not used. Just keep it (globally) unique and
-# descriptive.
-#
-# Use this only for very trivial stuff. Usually replacing the whole file
-# is a more stable solution with less maintenance headaches afterwards.
-#
-# Usage:
-# line { description:
-# file => "filename",
-# line => "content",
-# ensure => {absent,*present*}
-# }
-#
-# Example:
-# The following ensures that the line "allow ^$munin_host$" exists in
-# /etc/munin/munin-node.conf, and if there are any changes notify the
-# service for a restart
-#
-# line {
-# allow_munin_host:
-# file => "/etc/munin/munin-node.conf",
-# line => "allow ^$munin_host$",
-# ensure => present,
-# notify => Service[munin-node],
-# require => Package[munin-node];
-# }
-#
-# Code with fixes gathered at
-# http://reductivelabs.com/trac/puppet/wiki/Recipes/SimpleText
-define line($file, $line, $ensure = 'present') {
- case $ensure {
- default : { err ( "unknown ensure value '${ensure}'" ) }
- present: {
- exec { "echo '${line}' >> '${file}'":
- unless => "grep -qFx '${line}' '${file}'"
- }
- }
- absent: {
- $subst_line = regsubst($line,'(/|\.)','\\\1','G')
- exec { "sed -i '/${subst_line}/d' '${file}'":
- onlyif => "grep -qFx '${line}' '${file}'"
- }
- }
- }
-}
diff --git a/manifests/defines/link.pp b/manifests/defines/link.pp
deleted file mode 100644
index e8e4a9f..0000000
--- a/manifests/defines/link.pp
+++ /dev/null
@@ -1,12 +0,0 @@
-# common/manifests/defines/link.pp -- create a link
-#
-# Copyleft (C) 2009 immerdaadmin <admin@immerda.ch>
-# See LICENSE for the full license granted to you.
-
-# Usage:
-# link { "/usr/bin/convert": target => "/usr/local/bin/convert" }
-# e.g. equivalent to bash# ln -s /usr/bin/convert /usr/local/bin/convert
-
-define link($target = absent) {
- file{$name: ensure => $target; }
-}
diff --git a/manifests/defines/module_dir.pp b/manifests/defines/module_dir.pp
deleted file mode 100644
index 227fe71..0000000
--- a/manifests/defines/module_dir.pp
+++ /dev/null
@@ -1,50 +0,0 @@
-# common/manifests/defines/modules_dir.pp -- create a default directory
-# for storing module specific information
-#
-# Copyright (C) 2007 David Schmitt <david@schmitt.edv-bus.at>
-# See LICENSE for the full license granted to you.
-
-# A module_dir is a storage place for all the stuff a module might want to
-# store. According to the FHS, this should go to /var/lib. Since this is a part
-# of puppet, the full path is /var/lib/puppet/modules/${name}. Every module
-# should # prefix its module_dirs with its name.
-#
-# By default, the module_dir is loaded from "puppet:///${name}/module_dir". If
-# that doesn't exist an empty directory is taken as source. The directory is
-# purged so that modules do not have to worry about removing cruft.
-#
-# Usage:
-# include common::moduledir
-# module_dir { ["common", "common/dir1", "common/dir2" ]: }
-#
-# You may refer to a file in module_dir by using :
-# file { "${common::moduledir::module_dir_path}/somedir/somefile": }
-
-define module_dir (
- $mode = 0644, $owner = root, $group = 0
- )
-{
- include common::moduledir
- $dir = "${common::moduledir::module_dir_path}/${name}"
- if defined(File[$dir]) {
- debug("${dir} already defined")
- } else {
- file {
- $dir:
- source => [ "puppet:///modules/${name}/modules_dir", "puppet:///modules/common/empty"],
- checksum => mtime,
- # ignore the placeholder
- ignore => '.ignore',
- recurse => true, purge => true, force => true,
- mode => $mode, owner => $owner, group => $group;
- }
- }
-}
-
-# alias for compatibility
-define modules_dir (
- $mode = 0644, $owner = root, $group = 0
- )
-{
- module_dir { $name: mode => $mode, owner => $owner, group => $group }
-}
diff --git a/manifests/defines/module_file.pp b/manifests/defines/module_file.pp
deleted file mode 100644
index 5977b2d..0000000
--- a/manifests/defines/module_file.pp
+++ /dev/null
@@ -1,47 +0,0 @@
-# common/manifests/defines/modules_file.pp -- use a modules_dir to store module
-# specific files
-#
-# Copyright (C) 2007 David Schmitt <david@schmitt.edv-bus.at>
-# See LICENSE for the full license granted to you.
-
-# Put a file into module-local storage.
-#
-# Usage:
-# modules_file { "module/file":
-# source => "puppet:///...",
-# mode => 644, # default
-# owner => root, # default
-# group => 0, # default
-# }
-define module_file (
- $source,
- $ensure = present,
- $m_alias = undef,
- $mode = 0644, $owner = root, $group = 0
- )
-{
- include common::moduledir
- file {
- "${common::moduledir::module_dir_path}/${name}":
- source => $source,
- ensure => $ensure,
- alias => $m_alias,
- mode => $mode, owner => $owner, group => $group;
- }
-}
-
-# alias for compatibility
-define modules_file (
- $source,
- $ensure = present,
- $m_alias = undef,
- $mode = 0644, $owner = root, $group = 0
- )
-{
- module_file { $name:
- source => $source,
- ensure => $ensure,
- alias => $m_alias,
- mode => $mode, owner => $owner, group => $group
- }
-}
diff --git a/manifests/defines/replace.pp b/manifests/defines/replace.pp
deleted file mode 100644
index dd8db4d..0000000
--- a/manifests/defines/replace.pp
+++ /dev/null
@@ -1,40 +0,0 @@
-# common/manifests/defines/replace.pp -- replace a pattern in a file with a string
-# Copyright (C) 2007 David Schmitt <david@schmitt.edv-bus.at>
-# See LICENSE for the full license granted to you.
-
-# A hack to replace all occurrences of a regular expression in a file with a
-# specified string. Sometimes it can be less effort to replace only a single
-# value in a huge config file instead of creating a template out of it. Still,
-# creating a template is often better than this hack.
-#
-# This define uses perl regular expressions.
-#
-# Use this only for very trivial stuff. Usually replacing the whole file is a
-# more stable solution with less maintenance headaches afterwards.
-#
-# Usage:
-#
-# replace { description:
-# file => "filename",
-# pattern => "regexp",
-# replacement => "replacement"
-#
-# Example:
-# To replace the current port in /etc/munin/munin-node.conf
-# with a new port, but only disturbing the file when needed:
-#
-# replace { set_munin_node_port:
-# file => "/etc/munin/munin-node.conf",
-# pattern => "^port (?!$port)[0-9]*",
-# replacement => "port $port"
-# }
-
-define replace($file, $pattern, $replacement) {
- $pattern_no_slashes = slash_escape($pattern)
- $replacement_no_slashes = slash_escape($replacement)
- exec { "replace_${pattern}_${file}":
- command => "/usr/bin/perl -pi -e 's/${pattern_no_slashes}/${replacement_no_slashes}/' '${file}'",
- onlyif => "/usr/bin/perl -ne 'BEGIN { \$ret = 1; } \$ret = 0 if /${pattern_no_slashes}/ && ! /\\Q${replacement_no_slashes}\\E/; END { exit \$ret; }' '${file}'",
- alias => "exec_$name",
- }
-}
diff --git a/manifests/init.pp b/manifests/init.pp
deleted file mode 100644
index 3a9faf5..0000000
--- a/manifests/init.pp
+++ /dev/null
@@ -1,6 +0,0 @@
-# common/manifests/init.pp - Define common infrastructure for modules
-# Copyright (C) 2007 David Schmitt <david@schmitt.edv-bus.at>
-# See LICENSE for the full license granted to you.
-
-import "defines/*.pp"
-
diff --git a/manifests/module_dir.pp b/manifests/module_dir.pp
new file mode 100644
index 0000000..2420da9
--- /dev/null
+++ b/manifests/module_dir.pp
@@ -0,0 +1,34 @@
+# common/manifests/modules_dir.pp -- create a default directory
+# for storing module specific information
+#
+# Copyright (C) 2007 David Schmitt <david@schmitt.edv-bus.at>
+# See LICENSE for the full license granted to you.
+
+# A module_dir is a storage place for all the stuff a module might want to
+# store. According to the FHS, this should go to /var/lib. Since this is a part
+# of puppet, the full path is /var/lib/puppet/modules/${name}. Every module
+# should # prefix its module_dirs with its name.
+#
+# Usage:
+# include common::moduledir
+# module_dir { ["common", "common/dir1", "common/dir2" ]: }
+#
+# You may refer to a file in module_dir by using :
+# file { "${common::moduledir::module_dir_path}/somedir/somefile": }
+define common::module_dir(
+ $owner = root,
+ $group = 0,
+ $mode = 0644
+) {
+ include common::moduledir
+ file {
+ "${common::moduledir::module_dir_path}/${name}":
+ ensure => directory,
+ recurse => true,
+ purge => true,
+ force => true,
+ owner => $owner,
+ group => $group,
+ mode => $mode;
+ }
+}
diff --git a/manifests/module_file.pp b/manifests/module_file.pp
new file mode 100644
index 0000000..c1070bc
--- /dev/null
+++ b/manifests/module_file.pp
@@ -0,0 +1,37 @@
+# common/manifests/module_file.pp -- use a modules_dir to store module
+# specific files
+#
+# Copyright (C) 2007 David Schmitt <david@schmitt.edv-bus.at>
+# See LICENSE for the full license granted to you.
+
+# Put a file into module-local storage.
+#
+# Usage:
+# common::module_file { "module/file":
+# source => "puppet:///...",
+# mode => 644, # default
+# owner => root, # default
+# group => 0, # default
+# }
+define common::module_file (
+ $ensure = present,
+ $source = undef,
+ $owner = root,
+ $group = 0,
+ $mode = 0644
+){
+ include common::moduledir
+ file {
+ "${common::moduledir::module_dir_path}/${name}":
+ ensure => $ensure,
+ }
+
+ if $ensure != 'absent' {
+ File["${common::moduledir::module_dir_path}/${name}"]{
+ source => $source,
+ owner => $owner,
+ group => $group,
+ mode => $mode,
+ }
+ }
+}
diff --git a/manifests/moduledir.pp b/manifests/moduledir.pp
index df83e60..f779085 100644
--- a/manifests/moduledir.pp
+++ b/manifests/moduledir.pp
@@ -1,15 +1,18 @@
+# setup root for module_dirs
class common::moduledir {
- # Use this variable to reference the base path. Thus you are safe from any
- # changes.
- $module_dir_path = '/var/lib/puppet/modules'
+ # Use this variable to reference the base path. Thus you are safe from any
+ # changes.
+ $module_dir_path = '/var/lib/puppet/modules'
- # Module programmers can use /var/lib/puppet/modules/$modulename to save
- # module-local data, e.g. for constructing config files
- file{$module_dir_path:
- ensure => directory,
- source => "puppet:///modules/common/modules/",
- ignore => '.ignore',
- recurse => true, purge => true, force => true,
- mode => 0755, owner => root, group => 0;
- }
+ # Module programmers can use /var/lib/puppet/modules/$modulename to save
+ # module-local data, e.g. for constructing config files
+ file{$module_dir_path:
+ ensure => directory,
+ recurse => true,
+ purge => true,
+ force => true,
+ owner => root,
+ group => 0,
+ mode => '0755';
+ }
}
diff --git a/manifests/moduledir/common.pp b/manifests/moduledir/common.pp
index c615f84..e74c601 100644
--- a/manifests/moduledir/common.pp
+++ b/manifests/moduledir/common.pp
@@ -1,3 +1,4 @@
+# setup a common dir
class common::moduledir::common{
- module_dir{'common': }
+ common::module_dir{'common': }
}
diff --git a/manifests/moduledir/common/cf.pp b/manifests/moduledir/common/cf.pp
deleted file mode 100644
index b3c089b..0000000
--- a/manifests/moduledir/common/cf.pp
+++ /dev/null
@@ -1,4 +0,0 @@
-class common::moduledir::common::cf {
- include ::common::moduledir::common
- module_dir{'common/cf': }
-}