Removes templates

11 files changed, 0 insertions, 353 deletions

diff --git a/templates/puppet/auth.conf.erb b/templates/puppet/auth.conf.erb
deleted file mode 100644
index 96f078c..0000000
--- a/templates/puppet/auth.conf.erb
+++ /dev/null
@@ -1,120 +0,0 @@
-# This is the default auth.conf file, which implements the default rules
-# used by the puppet master. (That is, the rules below will still apply
-# even if this file is deleted.)
-#
-# The ACLs are evaluated in top-down order. More specific stanzas should
-# be towards the top of the file and more general ones at the bottom;
-# otherwise, the general rules may "steal" requests that should be
-# governed by the specific rules.
-#
-# See http://docs.puppetlabs.com/guides/rest_auth_conf.html for a more complete
-# description of auth.conf's behavior.
-#
-# Supported syntax:
-# Each stanza in auth.conf starts with a path to match, followed
-# by optional modifiers, and finally, a series of allow or deny
-# directives.
-#
-# Example Stanza
-# ---------------------------------
-# path /path/to/resource     # simple prefix match
-# # path ~ regex             # alternately, regex match
-# [environment envlist]
-# [method methodlist]
-# [auth[enthicated] {yes|no|on|off|any}]
-# allow [host|backreference|*|regex]
-# deny [host|backreference|*|regex]
-# allow_ip [ip|cidr|ip_wildcard|*]
-# deny_ip [ip|cidr|ip_wildcard|*]
-#
-# The path match can either be a simple prefix match or a regular
-# expression. `path /file` would match both `/file_metadata` and
-# `/file_content`. Regex matches allow the use of backreferences
-# in the allow/deny directives.
-#
-# The regex syntax is the same as for Ruby regex, and captures backreferences
-# for use in the `allow` and `deny` lines of that stanza
-#
-# Examples:
-#
-# path ~ ^/path/to/resource    # Equivalent to `path /path/to/resource`.
-# allow *                      # Allow all authenticated nodes (since auth
-#                              # defaults to `yes`).
-#
-# path ~ ^/catalog/([^/]+)$    # Permit nodes to access their own catalog (by
-# allow $1                     # certname), but not any other node's catalog.
-#
-# path ~ ^/file_(metadata|content)/extra_files/  # Only allow certain nodes to
-# auth yes                                       # access the "extra_files"
-# allow /^(.+)\.example\.com$/                   # mount point; note this must
-# allow_ip 192.168.100.0/24                      # go ABOVE the "/file" rule,
-#                                                # since it is more specific.
-#
-# environment:: restrict an ACL to a comma-separated list of environments
-# method:: restrict an ACL to a comma-separated list of HTTP methods
-# auth:: restrict an ACL to an authenticated or unauthenticated request
-# the default when unspecified is to restrict the ACL to authenticated requests
-# (ie exactly as if auth yes was present).
-#
-
-### Authenticated ACLs - these rules apply only when the client
-### has a valid certificate and is thus authenticated
-
-# allow nodes to retrieve their own catalog
-path ~ ^/catalog/([^/]+)$
-method find
-allow $1
-
-# allow nodes to retrieve their own node definition
-path ~ ^/node/([^/]+)$
-method find
-allow $1
-
-# allow all nodes to access the certificates services
-path /certificate_revocation_list/ca
-method find
-allow *
-
-# allow all nodes to store their own reports
-path ~ ^/report/([^/]+)$
-method save
-allow $1
-
-# Allow all nodes to access all file services; this is necessary for
-# pluginsync, file serving from modules, and file serving from custom
-# mount points (see fileserver.conf). Note that the `/file` prefix matches
-# requests to both the file_metadata and file_content paths. See "Examples"
-# above if you need more granular access control for custom mount points.
-path /file
-allow *
-
-### Unauthenticated ACLs, for clients without valid certificates; authenticated
-### clients can also access these paths, though they rarely need to.
-
-# allow access to the CA certificate; unauthenticated nodes need this
-# in order to validate the puppet master's certificate
-path /certificate/ca
-auth any
-method find
-allow *
-
-# allow nodes to retrieve the certificate they requested earlier
-path /certificate/
-auth any
-method find
-allow *
-
-# allow nodes to request a new certificate
-path /certificate_request
-auth any
-method find, save
-allow *
-
-path /v2.0/environments
-method find
-allow *
-
-# deny everything else; this ACL is not strictly necessary, but
-# illustrates the default policy.
-path /
-auth any
diff --git a/templates/puppet/fileserver.conf.erb b/templates/puppet/fileserver.conf.erb
deleted file mode 100644
index e4d6e0a..0000000
--- a/templates/puppet/fileserver.conf.erb
+++ /dev/null
@@ -1,21 +0,0 @@
-# See http://docs.puppetlabs.com/guides/file_serving.html
-
-# Files
-[files]
-  path /etc/puppet/files
-  allow *.<%= base_domain %>
-
-# SSL keys
-[ssl]
-  path /etc/puppet/keys/ssl
-  deny *
-
-# SSH keys
-[ssh]
-  path /etc/puppet/keys/ssh/%h
-  allow *
-
-# Public keys
-[pubkeys]
-  path /etc/puppet/keys/public
-  allow *
diff --git a/templates/puppet/master.pp.erb b/templates/puppet/master.pp.erb
deleted file mode 100644
index 5865723..0000000
--- a/templates/puppet/master.pp.erb
+++ /dev/null
@@ -1,10 +0,0 @@
-node '<%= hostname %>-master.<%= domain %>' {
-  $main_master    = true
-  include nodo::master
-
-  # encrypted data remote backup
-  #backup::rdiff { "other-host":
-  #  port   => "10102",
-  #}
-
-}
diff --git a/templates/puppet/nodes.pp.erb b/templates/puppet/nodes.pp.erb
deleted file mode 100644
index 4acddc6..0000000
--- a/templates/puppet/nodes.pp.erb
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# Node definitions.
-#
-
-<%- if first_nodes == 'present' then -%>
-import "nodes/<%= first_hostname %>.pp"
-import "nodes/<%= first_hostname %>-master.pp"
-import "nodes/<%= first_hostname %>-proxy.pp"
-import "nodes/<%= first_hostname %>-web.pp"
-import "nodes/<%= first_hostname %>-storage.pp"
-import "nodes/<%= first_hostname %>-test.pp"
-<%- else -%>
-#import "nodes/example.pp"
-<%- end -%>
diff --git a/templates/puppet/proxy.pp.erb b/templates/puppet/proxy.pp.erb
deleted file mode 100644
index 908c2ec..0000000
--- a/templates/puppet/proxy.pp.erb
+++ /dev/null
@@ -1,53 +0,0 @@
-node '<%= hostname %>-proxy.<%= domain %>' {
-  #$mail_delivery = 'tunnel'
-  #$mail_hostname = 'mail'
-  #$mail_ssh_port = '2202'
-
-  include nodo::proxy
-
-  # encrypted data remote backup
-  #backup::rdiff { "other-host":
-  #  port   => "10102",
-  #}
-
-  # reference to admin vserver
-  host { "<%= hostname %>-master":
-    ensure       => present,
-    ip           => "192.168.0.2",
-    host_aliases => [ "<%= hostname %>-master.<%= domain %>", "puppet", "admin" ],
-    notify       => Service["nginx"],
-  }
-
-  # reference to proxy vserver
-  #host { "<%= hostname %>-proxy":
-  #  ensure       => present,
-  #  ip           => "192.168.0.3",
-  #  host_aliases => [ "<%= hostname %>-proxy.<%= domain %>", "<%= hostname %>-proxy" ],
-  #  notify       => Service["nginx"],
-  #}
-
-  # reference to web vserver
-  host { "<%= hostname %>-web":
-    ensure       => present,
-    ip           => "192.168.0.4",
-    host_aliases => [ "<%= hostname %>-web.<%= domain %>", "<%= hostname %>-web", "weblocal" ],
-    notify       => Service["nginx"],
-  }
-
-  # reference to storage vserver
-  host { "<%= hostname %>-storage":
-    ensure       => present,
-    ip           => "192.168.0.5",
-    host_aliases => [ "<%= hostname %>-storage.<%= domain %>", "<%= hostname %>-storage" ],
-    notify       => Service["nginx"],
-  }
-
-  # reference to test vserver
-  host { "<%= hostname %>-test":
-    ensure       => present,
-    ip           => "192.168.0.6",
-    host_aliases => [ "<%= hostname %>-test.<%= domain %>", "<%= hostname %>-test" ],
-    notify       => Service["nginx"],
-  }
-
-}
diff --git a/templates/puppet/puppet.conf.erb b/templates/puppet/puppet.conf.erb
deleted file mode 100644
index e2751ca..0000000
--- a/templates/puppet/puppet.conf.erb
+++ /dev/null
@@ -1,30 +0,0 @@
-[main]
-logdir                   = /var/log/puppet
-vardir                   = /var/lib/puppetmaster
-ssldir                   = $vardir/ssl
-rundir                   = /var/run/puppet
-factpath                 = $vardir/lib/facter
-pluginsync               = true
-
-[master]
-templatedir              = $vardir/templates
-masterport               = 8140
-autosign                 = false
-storeconfigs             = true
-dbadapter                = sqlite3
-#dbadapter                = mysql
-#dbserver                 = localhost
-#dbuser                   = puppet
-#dbpassword               = <%= db_password %>
-dbconnections            = 15
-certname                 = puppet.<%= base_domain %>
-ssl_client_header        = SSL_CLIENT_S_DN
-ssl_client_verify_header = SSL_CLIENT_VERIFY
-
-[agent]
-server                   = puppet.<%= base_domain %>
-vardir                   = /var/lib/puppet
-ssldir                   = $vardir/ssl
-runinterval              = 7200
-puppetport               = 8139
-configtimeout            = 300
diff --git a/templates/puppet/server.pp.erb b/templates/puppet/server.pp.erb
deleted file mode 100644
index fcd21e0..0000000
--- a/templates/puppet/server.pp.erb
+++ /dev/null
@@ -1,41 +0,0 @@
-node '<%= hostname %>.<%= domain %>' {
-  #$mail_delivery          = 'tunnel'
-  #$mail_hostname          = 'mail'
-  #$mail_ssh_port          = '2202'
-  $shorewall_dmz          = true
-  $resolvconf_nameservers = $opendns_nameservers
-  $has_ups                = false
-  include nodo::server
-
-  #
-  # Linux-VServers
-  #
-  #nodo::vserver::instance { "<%= hostname %>-master":
-  #  context      => '2',
-  #  puppetmaster => true,
-  #}
-
-  #nodo::vserver::instance { "<%= hostname %>-proxy":
-  #  context => '3',
-  #  proxy   => true,
-  #}
-
-  #nodo::vserver::instance { "<%= hostname %>-web":
-  #  context => '4',
-  #  gitd    => true,
-  #}
-
-  #nodo::vserver::instance { "<%= hostname %>-storage":
-  #  context      => '5',
-  #}
-
-  #nodo::vserver::instance { "<%= hostname %>-test":
-  #  context => '6',
-  #  memory_limit => 500,
-  #}
-
-  # encrypted data remote backup
-  #backup::rdiff { "other-host":
-  #  port   => "10105",
-  #}
-}
diff --git a/templates/puppet/storage.pp.erb b/templates/puppet/storage.pp.erb
deleted file mode 100644
index be93335..0000000
--- a/templates/puppet/storage.pp.erb
+++ /dev/null
@@ -1,13 +0,0 @@
-node '<%= hostname %>-storage.<%= domain %>' {
-  #$mail_delivery          = 'tunnel'
-  #$mail_hostname          = 'mail'
-  #$mail_ssh_port          = '2202'
-
-  include nodo::storage
-
-  # encrypted data remote backup
-  #backup::rdiff { "other-host":
-  #  port   => "10102",
-  #}
-
-}
diff --git a/templates/puppet/test.pp.erb b/templates/puppet/test.pp.erb
deleted file mode 100644
index 816eca9..0000000
--- a/templates/puppet/test.pp.erb
+++ /dev/null
@@ -1,13 +0,0 @@
-node '<%= hostname %>-test.<%= domain %>' {
-  #$mail_delivery          = 'tunnel'
-  #$mail_hostname          = 'mail'
-  #$mail_ssh_port          = '2202'
-
-  include nodo::test
-
-  # encrypted data remote backup
-  #backup::rdiff { "other-host":
-  #  port   => "10102",
-  #}
-
-}
diff --git a/templates/puppet/users.pp.erb b/templates/puppet/users.pp.erb
deleted file mode 100644
index 3b7c857..0000000
--- a/templates/puppet/users.pp.erb
+++ /dev/null
@@ -1,25 +0,0 @@
-class users::virtual inherits user {
-  # define custom users here
-}
-
-class users::backup inherits user {
-  # define third-party hosted backup users here
-}
-
-class users::admin inherits user {
-  # root user and password
-  user::manage { "root":
-    tag      => "admin",
-    homedir  => '/root',
-    password => '<%= root_password %>',
-  }
-
-  # first user config
-  user::manage { "<%= first_user %>":
-    tag      => "admin",
-    groups   => [ "sudo", ],
-    password => '<%= first_user_password %>',
-    sshkey   => [ "<%= first_user_sshkey %>" ],
-  }
-
-}
diff --git a/templates/puppet/web.pp.erb b/templates/puppet/web.pp.erb
deleted file mode 100644
index afc328b..0000000
--- a/templates/puppet/web.pp.erb
+++ /dev/null
@@ -1,13 +0,0 @@
-node '<%= hostname %>-web.<%= domain %>' {
-  #$mail_delivery          = 'tunnel'
-  #$mail_hostname          = 'mail'
-  #$mail_ssh_port          = '2202'
-
-  include nodo::web
-
-  # encrypted data remote backup
-  #backup::rdiff { "other-host":
-  #  port   => "10102",
-  #}
-
-}