1 files changed, 171 insertions, 0 deletions
diff --git a/share/provision/files/ipredator/etc/ferm/ferm.conf b/share/provision/files/ipredator/etc/ferm/ferm.conf
new file mode 100644
index 0000000..d7b97a3
--- /dev/null
+++ b/share/provision/files/ipredator/etc/ferm/ferm.conf
@@ -0,0 +1,171 @@
+# -*- shell-script -*-
+#
+#  Configuration file for ferm(1).
+#
+#  V: 0.1
+#
+#  ferm manual: http://ferm.foo-projects.org/download/2.2/ferm.html
+#  Blog post:   https://blog.ipredator.se/linux-firewall-howto.html
+#
+
+# Really make sure that these modules exist and are loaded.
+@hook pre "/sbin/modprobe nf_conntrack_ftp";
+@hook pre "/sbin/modprobe nfnetlink_log";
+
+# Network interfaces.
+#@def $DEV_LAN = eth0;
+@def $DEV_LAN = ens3;
+@def $DEV_LOOPBACK = lo0;
+@def $DEV_VPN = tun0;
+
+# Network definition for the loopback device. This is needed to allow
+# DNS resolution on Ubuntu Linux where the local resolver is bound
+# to 127.0.1.1 - as opposed to the default 127.0.0.1.
+@def $NET_LOOPBACK = 127.0.0.0/8;
+
+# Common application ports.
+@def $PORT_DNS = 53;
+@def $PORT_FTP = ( 20 21 );
+@def $PORT_NTP = 123;
+@def $PORT_SSH = 22;
+@def $PORT_WEB = ( 80 443 );
+
+# The ports we allow OpenVPN to connect to. IPredator allows you
+# to connect on _any_ port. Simply add more ports if desired but
+# stick to only those that you really need.
+@def $PORT_OPENVPN = (1194 1234 1337 2342 5060);
+
+# Public DNS servers and those that are only reachable via VPN.
+# DNS servers are specified in the outbound DNS rules to prevent DNS leaks
+# (https://www.dnsleaktest.com/). The public DNS servers configured on your
+# system should be the IPredator ones (https://www.ipredator.se/page/services#service_dns),
+# but you need to verify this.
+#
+@def $IP_DNS_IPR_PUBLIC = (194.132.32.32/32 46.246.46.246/32);
+
+# Add your ISP name server to this object if you want to restrict 
+# which DNS servers can be queried.
+@def $IP_DNS_PUBLIC = 0.0.0.0/0;
+
+# DNS server available within the VPN.
+@def $IP_DNS_VPN = ( 46.246.46.46/32 194.132.32.23/32 );
+
+# Make sure to use the proper VPN interface (e.g. tun0 in this case).
+# Note: You cannot reference $DEV_VPN here, substition does not take
+#       place for commands passed to a sub shell.
+@def $VPN_ACTIVE = `ip link show tun0 >/dev/null 2>/dev/null && echo 1 || echo`;
+
+# VPN interface conditional. If true the following rules are loaded.
+@if $VPN_ACTIVE {
+    domain ip {
+        table filter {
+            chain OUTPUT {
+                # Default allowed outbound services on the VPN interface.
+                # If you need more simply add your rules here.
+                outerface $DEV_VPN {
+                    proto (tcp udp) daddr ( $IP_DNS_VPN $IP_DNS_IPR_PUBLIC ) dport $PORT_DNS ACCEPT;
+                    proto tcp dport $PORT_FTP ACCEPT;
+                    proto udp dport $PORT_NTP ACCEPT;
+                    proto tcp dport $PORT_SSH ACCEPT;
+                    proto tcp dport $PORT_WEB ACCEPT;
+                }
+            }
+        }
+    }
+}
+
+# The main IPv4 rule set.
+domain ip {
+    table filter {
+        chain INPUT {
+            # The default policy for the chain. Usually ACCEPT or DROP or REJECT.
+            policy DROP;
+
+            # Connection tracking.
+            mod state state INVALID DROP;
+            mod state state (ESTABLISHED RELATED) ACCEPT;
+
+            # Allow local traffic to loopback interface.
+            daddr $NET_LOOPBACK ACCEPT;
+ 
+            # Allow inbound SSH on your LAN interface _only_.
+            interface $DEV_LAN {
+                proto tcp dport $PORT_SSH ACCEPT;
+            }
+
+            # Respond to ping ... makes debugging easier.
+            proto icmp icmp-type echo-request ACCEPT;
+
+            # Log dropped packets.
+            NFLOG nflog-group 1;
+            DROP;
+        }
+
+        chain OUTPUT {
+            policy DROP;
+
+            # Connection tracking.
+            mod state state INVALID DROP;
+            mod state state (ESTABLISHED RELATED) ACCEPT;
+
+            # Allow local traffic from the loopback interface.
+            saddr $NET_LOOPBACK ACCEPT;
+  
+            # Respond to ping.
+            proto icmp icmp-type echo-request ACCEPT;
+
+            # Allowed services on the LAN interface.
+            outerface $DEV_LAN {
+                proto (tcp udp) daddr $IP_DNS_PUBLIC dport $PORT_DNS ACCEPT;
+                proto udp dport $PORT_NTP ACCEPT;
+                proto (tcp udp) dport $PORT_OPENVPN ACCEPT;
+                proto tcp dport $PORT_SSH ACCEPT;
+            }
+
+            # Log dropped packets.
+            NFLOG nflog-group 1;
+            DROP;
+        }
+
+        chain FORWARD {
+            policy DROP;
+
+            # If you use your machine to route traffic eg. 
+            # from a VM you have to add rules here!
+
+            # Log dropped packets.
+            NFLOG nflog-group 1;
+            DROP;
+        }
+    }
+}
+
+# IPv6 is generally disabled, communication on the loopback device is allowed.
+domain ip6 {
+    table filter {
+        chain INPUT {
+            policy DROP;
+
+            # Allow local traffic.
+            interface $DEV_LOOPBACK ACCEPT;
+
+            # Log dropped packets.
+            NFLOG nflog-group 1;
+            DROP;
+        }
+        chain OUTPUT {
+            policy DROP;
+
+            # Log dropped packets.
+            NFLOG nflog-group 1;
+            DROP;
+        }
+        chain FORWARD {
+            policy DROP;
+
+            # Log dropped packets.
+            NFLOG nflog-group 1;
+            DROP;
+        }
+    }
+}