diff options
Diffstat (limited to 'share/drupal8')
| -rw-r--r-- | share/drupal8/Makefile | 15 | ||||
| -rw-r--r-- | share/drupal8/default.services.yml | 174 | ||||
| -rw-r--r-- | share/drupal8/default.settings.php | 785 | ||||
| -rw-r--r-- | share/drupal8/development.services.yml | 9 | ||||
| -rw-r--r-- | share/drupal8/example.settings.local.php | 115 | ||||
| -rw-r--r-- | share/drupal8/example.sites.php | 55 |
6 files changed, 1147 insertions, 6 deletions
diff --git a/share/drupal8/Makefile b/share/drupal8/Makefile index dec93d3..3b005a9 100644 --- a/share/drupal8/Makefile +++ b/share/drupal8/Makefile @@ -8,7 +8,8 @@ PROJECT = drupal ENV = dev DATE = $(shell date +%Y%m%d) CWD = $(shell pwd) -DESTDIR ?= vendor +#DESTDIR ?= vendor +DESTDIR ?= /var/www/data DRUPAL = $(DESTDIR)/drupal-$(CORE) DRUSH = drush -r $(DRUPAL) -l $(PROJECT) @@ -18,9 +19,10 @@ production: submodules post_receive drush settings ownership # Setup a development environment #develop: submodules vagrant develop: submodules kvmx - rm -rf $(DRUPAL)/sites/default - ln -s $(PROJECT) $(DRUPAL)/sites/default - vagrant ssh -c "$(DRUSH) pm-enable devel -y" + #rm -rf $(DRUPAL)/sites/default + #ln -s $(PROJECT) $(DRUPAL)/sites/default + #vagrant ssh -c "$(DRUSH) pm-enable devel -y" + kvmx ssh "$(DRUSH) pm-enable devel -y" # Install the platform platform: drupal drush settings symlinks initdb cache @@ -40,6 +42,7 @@ vagrant: # Setup the virtual machine using kvmx kvmx: kvmx up + kvmx provision # Download drupal, setup folder structure and config file # @@ -49,7 +52,7 @@ drupal: #rm -rf $(DESTDIR)/drupal-$(CORE)* && drush pm-download -y -v drupal-$(CORE) --destination=/tmp/drupal && mv /tmp/drupal/drupal-$(CORE).* $(DESTDIR)/ #drush pm-download -y -v drupal-$(CORE) --destination=$(DESTDIR) #( cd $(DRUPAL)/.. && ln -s drupal-$(CORE).* drupal-$(CORE) ) - BASE=$(DESTDIR) drupal download 8 + BASE=$(DESTDIR) drupal download $(CORE) # Make the needed symlinks symlinks: @@ -144,7 +147,7 @@ upgrade-modules: # Upgrade drupal upgrade-drupal: - BASE=$(DESTDIR) drupal upgrade $(OLD) $(NEW) + BASE=$(DESTDIR) drupal upgrade $(CORE) # Configure update hook on remote host post_receive: diff --git a/share/drupal8/default.services.yml b/share/drupal8/default.services.yml new file mode 100644 index 0000000..e1bbbc7 --- /dev/null +++ b/share/drupal8/default.services.yml @@ -0,0 +1,174 @@ +parameters: + session.storage.options: + # Default ini options for sessions. + # + # Some distributions of Linux (most notably Debian) ship their PHP + # installations with garbage collection (gc) disabled. Since Drupal depends + # on PHP's garbage collection for clearing sessions, ensure that garbage + # collection occurs by using the most common settings. + # @default 1 + gc_probability: 1 + # @default 100 + gc_divisor: 100 + # + # Set session lifetime (in seconds), i.e. the time from the user's last + # visit to the active session may be deleted by the session garbage + # collector. When a session is deleted, authenticated users are logged out, + # and the contents of the user's $_SESSION variable is discarded. + # @default 200000 + gc_maxlifetime: 200000 + # + # Set session cookie lifetime (in seconds), i.e. the time from the session + # is created to the cookie expires, i.e. when the browser is expected to + # discard the cookie. The value 0 means "until the browser is closed". + # @default 2000000 + cookie_lifetime: 2000000 + # + # Drupal automatically generates a unique session cookie name based on the + # full domain name used to access the site. This mechanism is sufficient + # for most use-cases, including multi-site deployments. However, if it is + # desired that a session can be reused across different subdomains, the + # cookie domain needs to be set to the shared base domain. Doing so assures + # that users remain logged in as they cross between various subdomains. + # To maximize compatibility and normalize the behavior across user agents, + # the cookie domain should start with a dot. + # + # @default none + # cookie_domain: '.example.com' + # + twig.config: + # Twig debugging: + # + # When debugging is enabled: + # - The markup of each Twig template is surrounded by HTML comments that + # contain theming information, such as template file name suggestions. + # - Note that this debugging markup will cause automated tests that directly + # check rendered HTML to fail. When running automated tests, 'debug' + # should be set to FALSE. + # - The dump() function can be used in Twig templates to output information + # about template variables. + # - Twig templates are automatically recompiled whenever the source code + # changes (see auto_reload below). + # + # For more information about debugging Twig templates, see + # https://www.drupal.org/node/1906392. + # + # Not recommended in production environments + # @default false + debug: false + # Twig auto-reload: + # + # Automatically recompile Twig templates whenever the source code changes. + # If you don't provide a value for auto_reload, it will be determined + # based on the value of debug. + # + # Not recommended in production environments + # @default null + auto_reload: null + # Twig cache: + # + # By default, Twig templates will be compiled and stored in the filesystem + # to increase performance. Disabling the Twig cache will recompile the + # templates from source each time they are used. In most cases the + # auto_reload setting above should be enabled rather than disabling the + # Twig cache. + # + # Not recommended in production environments + # @default true + cache: true + renderer.config: + # Renderer required cache contexts: + # + # The Renderer will automatically associate these cache contexts with every + # render array, hence varying every render array by these cache contexts. + # + # @default ['languages:language_interface', 'theme', 'user.permissions'] + required_cache_contexts: ['languages:language_interface', 'theme', 'user.permissions'] + # Renderer automatic placeholdering conditions: + # + # Drupal allows portions of the page to be automatically deferred when + # rendering to improve cache performance. That is especially helpful for + # cache contexts that vary widely, such as the active user. On some sites + # those may be different, however, such as sites with only a handful of + # users. If you know what the high-cardinality cache contexts are for your + # site, specify those here. If you're not sure, the defaults are fairly safe + # in general. + # + # For more information about rendering optimizations see + # https://www.drupal.org/developing/api/8/render/arrays/cacheability#optimizing + auto_placeholder_conditions: + # Max-age at or below which caching is not considered worthwhile. + # + # Disable by setting to -1. + # + # @default 0 + max-age: 0 + # Cache contexts with a high cardinality. + # + # Disable by setting to []. + # + # @default ['session', 'user'] + contexts: ['session', 'user'] + # Tags with a high invalidation frequency. + # + # Disable by setting to []. + # + # @default [] + tags: [] + # Cacheability debugging: + # + # Responses with cacheability metadata (CacheableResponseInterface instances) + # get X-Drupal-Cache-Tags and X-Drupal-Cache-Contexts headers. + # + # For more information about debugging cacheable responses, see + # https://www.drupal.org/developing/api/8/response/cacheable-response-interface + # + # Not recommended in production environments + # @default false + http.response.debug_cacheability_headers: false + factory.keyvalue: + {} + # Default key/value storage service to use. + # @default keyvalue.database + # default: keyvalue.database + # Collection-specific overrides. + # state: keyvalue.database + factory.keyvalue.expirable: + {} + # Default key/value expirable storage service to use. + # @default keyvalue.database.expirable + # default: keyvalue.database.expirable + # Allowed protocols for URL generation. + filter_protocols: + - http + - https + - ftp + - news + - nntp + - tel + - telnet + - mailto + - irc + - ssh + - sftp + - webcal + - rtsp + + # Configure Cross-Site HTTP requests (CORS). + # Read https://developer.mozilla.org/en-US/docs/Web/HTTP/Access_control_CORS + # for more information about the topic in general. + # Note: By default the configuration is disabled. + cors.config: + enabled: false + # Specify allowed headers, like 'x-allowed-header'. + allowedHeaders: [] + # Specify allowed request methods, specify ['*'] to allow all possible ones. + allowedMethods: [] + # Configure requests allowed from specific origins. + allowedOrigins: ['*'] + # Sets the Access-Control-Expose-Headers header. + exposedHeaders: false + # Sets the Access-Control-Max-Age header. + maxAge: false + # Sets the Access-Control-Allow-Credentials header. + supportsCredentials: false diff --git a/share/drupal8/default.settings.php b/share/drupal8/default.settings.php new file mode 100644 index 0000000..c7dd194 --- /dev/null +++ b/share/drupal8/default.settings.php @@ -0,0 +1,785 @@ +<?php + +/** + * @file + * Drupal site-specific configuration file. + * + * IMPORTANT NOTE: + * This file may have been set to read-only by the Drupal installation program. + * If you make changes to this file, be sure to protect it again after making + * your modifications. Failure to remove write permissions to this file is a + * security risk. + * + * In order to use the selection rules below the multisite aliasing file named + * sites/sites.php must be present. Its optional settings will be loaded, and + * the aliases in the array $sites will override the default directory rules + * below. See sites/example.sites.php for more information about aliases. + * + * The configuration directory will be discovered by stripping the website's + * hostname from left to right and pathname from right to left. The first + * configuration file found will be used and any others will be ignored. If no + * other configuration file is found then the default configuration file at + * 'sites/default' will be used. + * + * For example, for a fictitious site installed at + * https://www.drupal.org:8080/mysite/test/, the 'settings.php' file is searched + * for in the following directories: + * + * - sites/8080.www.drupal.org.mysite.test + * - sites/www.drupal.org.mysite.test + * - sites/drupal.org.mysite.test + * - sites/org.mysite.test + * + * - sites/8080.www.drupal.org.mysite + * - sites/www.drupal.org.mysite + * - sites/drupal.org.mysite + * - sites/org.mysite + * + * - sites/8080.www.drupal.org + * - sites/www.drupal.org + * - sites/drupal.org + * - sites/org + * + * - sites/default + * + * Note that if you are installing on a non-standard port number, prefix the + * hostname with that number. For example, + * https://www.drupal.org:8080/mysite/test/ could be loaded from + * sites/8080.www.drupal.org.mysite.test/. + * + * @see example.sites.php + * @see \Drupal\Core\DrupalKernel::getSitePath() + * + * In addition to customizing application settings through variables in + * settings.php, you can create a services.yml file in the same directory to + * register custom, site-specific service definitions and/or swap out default + * implementations with custom ones. + */ + +/** + * Database settings: + * + * The $databases array specifies the database connection or + * connections that Drupal may use. Drupal is able to connect + * to multiple databases, including multiple types of databases, + * during the same request. + * + * One example of the simplest connection array is shown below. To use the + * sample settings, copy and uncomment the code below between the @code and + * @endcode lines and paste it after the $databases declaration. You will need + * to replace the database username and password and possibly the host and port + * with the appropriate credentials for your database system. + * + * The next section describes how to customize the $databases array for more + * specific needs. + * + * @code + * $databases['default']['default'] = array ( + * 'database' => 'databasename', + * 'username' => 'sqlusername', + * 'password' => 'sqlpassword', + * 'host' => 'localhost', + * 'port' => '3306', + * 'driver' => 'mysql', + * 'prefix' => '', + * 'collation' => 'utf8mb4_general_ci', + * ); + * @endcode + */ +$databases = array(); + +/** + * Customizing database settings. + * + * Many of the values of the $databases array can be customized for your + * particular database system. Refer to the sample in the section above as a + * starting point. + * + * The "driver" property indicates what Drupal database driver the + * connection should use. This is usually the same as the name of the + * database type, such as mysql or sqlite, but not always. The other + * properties will vary depending on the driver. For SQLite, you must + * specify a database file name in a directory that is writable by the + * webserver. For most other drivers, you must specify a + * username, password, host, and database name. + * + * Transaction support is enabled by default for all drivers that support it, + * including MySQL. To explicitly disable it, set the 'transactions' key to + * FALSE. + * Note that some configurations of MySQL, such as the MyISAM engine, don't + * support it and will proceed silently even if enabled. If you experience + * transaction related crashes with such configuration, set the 'transactions' + * key to FALSE. + * + * For each database, you may optionally specify multiple "target" databases. + * A target database allows Drupal to try to send certain queries to a + * different database if it can but fall back to the default connection if not. + * That is useful for primary/replica replication, as Drupal may try to connect + * to a replica server when appropriate and if one is not available will simply + * fall back to the single primary server (The terms primary/replica are + * traditionally referred to as master/slave in database server documentation). + * + * The general format for the $databases array is as follows: + * @code + * $databases['default']['default'] = $info_array; + * $databases['default']['replica'][] = $info_array; + * $databases['default']['replica'][] = $info_array; + * $databases['extra']['default'] = $info_array; + * @endcode + * + * In the above example, $info_array is an array of settings described above. + * The first line sets a "default" database that has one primary database + * (the second level default). The second and third lines create an array + * of potential replica databases. Drupal will select one at random for a given + * request as needed. The fourth line creates a new database with a name of + * "extra". + * + * You can optionally set prefixes for some or all database table names + * by using the 'prefix' setting. If a prefix is specified, the table + * name will be prepended with its value. Be sure to use valid database + * characters only, usually alphanumeric and underscore. If no prefixes + * are desired, leave it as an empty string ''. + * + * To have all database names prefixed, set 'prefix' as a string: + * @code + * 'prefix' => 'main_', + * @endcode + * + * Per-table prefixes are deprecated as of Drupal 8.2, and will be removed in + * Drupal 9.0. After that, only a single prefix for all tables will be + * supported. + * + * To provide prefixes for specific tables, set 'prefix' as an array. + * The array's keys are the table names and the values are the prefixes. + * The 'default' element is mandatory and holds the prefix for any tables + * not specified elsewhere in the array. Example: + * @code + * 'prefix' => array( + * 'default' => 'main_', + * 'users' => 'shared_', + * 'sessions' => 'shared_', + * 'role' => 'shared_', + * 'authmap' => 'shared_', + * ), + * @endcode + * You can also use a reference to a schema/database as a prefix. This may be + * useful if your Drupal installation exists in a schema that is not the default + * or you want to access several databases from the same code base at the same + * time. + * Example: + * @code + * 'prefix' => array( + * 'default' => 'main.', + * 'users' => 'shared.', + * 'sessions' => 'shared.', + * 'role' => 'shared.', + * 'authmap' => 'shared.', + * ); + * @endcode + * NOTE: MySQL and SQLite's definition of a schema is a database. + * + * Advanced users can add or override initial commands to execute when + * connecting to the database server, as well as PDO connection settings. For + * example, to enable MySQL SELECT queries to exceed the max_join_size system + * variable, and to reduce the database connection timeout to 5 seconds: + * @code + * $databases['default']['default'] = array( + * 'init_commands' => array( + * 'big_selects' => 'SET SQL_BIG_SELECTS=1', + * ), + * 'pdo' => array( + * PDO::ATTR_TIMEOUT => 5, + * ), + * ); + * @endcode + * + * WARNING: The above defaults are designed for database portability. Changing + * them may cause unexpected behavior, including potential data loss. See + * https://www.drupal.org/developing/api/database/configuration for more + * information on these defaults and the potential issues. + * + * More details can be found in the constructor methods for each driver: + * - \Drupal\Core\Database\Driver\mysql\Connection::__construct() + * - \Drupal\Core\Database\Driver\pgsql\Connection::__construct() + * - \Drupal\Core\Database\Driver\sqlite\Connection::__construct() + * + * Sample Database configuration format for PostgreSQL (pgsql): + * @code + * $databases['default']['default'] = array( + * 'driver' => 'pgsql', + * 'database' => 'databasename', + * 'username' => 'sqlusername', + * 'password' => 'sqlpassword', + * 'host' => 'localhost', + * 'prefix' => '', + * ); + * @endcode + * + * Sample Database configuration format for SQLite (sqlite): + * @code + * $databases['default']['default'] = array( + * 'driver' => 'sqlite', + * 'database' => '/path/to/databasefilename', + * ); + * @endcode + */ + +/** + * Location of the site configuration files. + * + * The $config_directories array specifies the location of file system + * directories used for configuration data. On install, the "sync" directory is + * created. This is used for configuration imports. The "active" directory is + * not created by default since the default storage for active configuration is + * the database rather than the file system. (This can be changed. See "Active + * configuration settings" below). + * + * The default location for the "sync" directory is inside a randomly-named + * directory in the public files path. The setting below allows you to override + * the "sync" location. + * + * If you use files for the "active" configuration, you can tell the + * Configuration system where this directory is located by adding an entry with + * array key CONFIG_ACTIVE_DIRECTORY. + * + * Example: + * @code + * $config_directories = array( + * CONFIG_SYNC_DIRECTORY => '/directory/outside/webroot', + * ); + * @endcode + */ +$config_directories = array(); + +/** + * Settings: + * + * $settings contains environment-specific configuration, such as the files + * directory and reverse proxy address, and temporary configuration, such as + * security overrides. + * + * @see \Drupal\Core\Site\Settings::get() + */ + +/** + * The active installation profile. + * + * Changing this after installation is not recommended as it changes which + * directories are scanned during extension discovery. If this is set prior to + * installation this value will be rewritten according to the profile selected + * by the user. + * + * @see install_select_profile() + * + * @deprecated in Drupal 8.3.0 and will be removed before Drupal 9.0.0. The + * install profile is written to the core.extension configuration. If a + * service requires the install profile use the 'install_profile' container + * parameter. Functional code can use \Drupal::installProfile(). + */ +# $settings['install_profile'] = ''; + +/** + * Salt for one-time login links, cancel links, form tokens, etc. + * + * This variable will be set to a random value by the installer. All one-time + * login links will be invalidated if the value is changed. Note that if your + * site is deployed on a cluster of web servers, you must ensure that this + * variable has the same value on each server. + * + * For enhanced security, you may set this variable to the contents of a file + * outside your document root; you should also ensure that this file is not + * stored with backups of your database. + * + * Example: + * @code + * $settings['hash_salt'] = file_get_contents('/home/example/salt.txt'); + * @endcode + */ +$settings['hash_salt'] = ''; + +/** + * Deployment identifier. + * + * Drupal's dependency injection container will be automatically invalidated and + * rebuilt when the Drupal core version changes. When updating contributed or + * custom code that changes the container, changing this identifier will also + * allow the container to be invalidated as soon as code is deployed. + */ +# $settings['deployment_identifier'] = \Drupal::VERSION; + +/** + * Access control for update.php script. + * + * If you are updating your Drupal installation using the update.php script but + * are not logged in using either an account with the "Administer software + * updates" permission or the site maintenance account (the account that was + * created during installation), you will need to modify the access check + * statement below. Change the FALSE to a TRUE to disable the access check. + * After finishing the upgrade, be sure to open this file again and change the + * TRUE back to a FALSE! + */ +$settings['update_free_access'] = FALSE; + +/** + * External access proxy settings: + * + * If your site must access the Internet via a web proxy then you can enter the + * proxy settings here. Set the full URL of the proxy, including the port, in + * variables: + * - $settings['http_client_config']['proxy']['http']: The proxy URL for HTTP + * requests. + * - $settings['http_client_config']['proxy']['https']: The proxy URL for HTTPS + * requests. + * You can pass in the user name and password for basic authentication in the + * URLs in these settings. + * + * You can also define an array of host names that can be accessed directly, + * bypassing the proxy, in $settings['http_client_config']['proxy']['no']. + */ +# $settings['http_client_config']['proxy']['http'] = 'http://proxy_user:proxy_pass@example.com:8080'; +# $settings['http_client_config']['proxy']['https'] = 'http://proxy_user:proxy_pass@example.com:8080'; +# $settings['http_client_config']['proxy']['no'] = ['127.0.0.1', 'localhost']; + +/** + * Reverse Proxy Configuration: + * + * Reverse proxy servers are often used to enhance the performance + * of heavily visited sites and may also provide other site caching, + * security, or encryption benefits. In an environment where Drupal + * is behind a reverse proxy, the real IP address of the client should + * be determined such that the correct client IP address is available + * to Drupal's logging, statistics, and access management systems. In + * the most simple scenario, the proxy server will add an + * X-Forwarded-For header to the request that contains the client IP + * address. However, HTTP headers are vulnerable to spoofing, where a + * malicious client could bypass restrictions by setting the + * X-Forwarded-For header directly. Therefore, Drupal's proxy + * configuration requires the IP addresses of all remote proxies to be + * specified in $settings['reverse_proxy_addresses'] to work correctly. + * + * Enable this setting to get Drupal to determine the client IP from + * the X-Forwarded-For header (or $settings['reverse_proxy_header'] if set). + * If you are unsure about this setting, do not have a reverse proxy, + * or Drupal operates in a shared hosting environment, this setting + * should remain commented out. + * + * In order for this setting to be used you must specify every possible + * reverse proxy IP address in $settings['reverse_proxy_addresses']. + * If a complete list of reverse proxies is not available in your + * environment (for example, if you use a CDN) you may set the + * $_SERVER['REMOTE_ADDR'] variable directly in settings.php. + * Be aware, however, that it is likely that this would allow IP + * address spoofing unless more advanced precautions are taken. + */ +# $settings['reverse_proxy'] = TRUE; + +/** + * Specify every reverse proxy IP address in your environment. + * This setting is required if $settings['reverse_proxy'] is TRUE. + */ +# $settings['reverse_proxy_addresses'] = array('a.b.c.d', ...); + +/** + * Set this value if your proxy server sends the client IP in a header + * other than X-Forwarded-For. + */ +# $settings['reverse_proxy_header'] = 'X_CLUSTER_CLIENT_IP'; + +/** + * Set this value if your proxy server sends the client protocol in a header + * other than X-Forwarded-Proto. + */ +# $settings['reverse_proxy_proto_header'] = 'X_FORWARDED_PROTO'; + +/** + * Set this value if your proxy server sends the client protocol in a header + * other than X-Forwarded-Host. + */ +# $settings['reverse_proxy_host_header'] = 'X_FORWARDED_HOST'; + +/** + * Set this value if your proxy server sends the client protocol in a header + * other than X-Forwarded-Port. + */ +# $settings['reverse_proxy_port_header'] = 'X_FORWARDED_PORT'; + +/** + * Set this value if your proxy server sends the client protocol in a header + * other than Forwarded. + */ +# $settings['reverse_proxy_forwarded_header'] = 'FORWARDED'; + +/** + * Page caching: + * + * By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page + * views. This tells a HTTP proxy that it may return a page from its local + * cache without contacting the web server, if the user sends the same Cookie + * header as the user who originally requested the cached page. Without "Vary: + * Cookie", authenticated users would also be served the anonymous page from + * the cache. If the site has mostly anonymous users except a few known + * editors/administrators, the Vary header can be omitted. This allows for + * better caching in HTTP proxies (including reverse proxies), i.e. even if + * clients send different cookies, they still get content served from the cache. + * However, authenticated users should access the site directly (i.e. not use an + * HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid + * getting cached pages from the proxy. + */ +# $settings['omit_vary_cookie'] = TRUE; + + +/** + * Cache TTL for client error (4xx) responses. + * + * Items cached per-URL tend to result in a large number of cache items, and + * this can be problematic on 404 pages which by their nature are unbounded. A + * fixed TTL can be set for these items, defaulting to one hour, so that cache + * backends which do not support LRU can purge older entries. To disable caching + * of client error responses set the value to 0. Currently applies only to + * page_cache module. + */ +# $settings['cache_ttl_4xx'] = 3600; + +/** + * Expiration of cached forms. + * + * Drupal's Form API stores details of forms in a cache and these entries are + * kept for at least 6 hours by default. Expired entries are cleared by cron. + * + * @see \Drupal\Core\Form\FormCache::setCache() + */ +# $settings['form_cache_expiration'] = 21600; + +/** + * Class Loader. + * + * If the APC extension is detected, the Symfony APC class loader is used for + * performance reasons. Detection can be prevented by setting + * class_loader_auto_detect to false, as in the example below. + */ +# $settings['class_loader_auto_detect'] = FALSE; + +/* + * If the APC extension is not detected, either because APC is missing or + * because auto-detection has been disabled, auto-loading falls back to + * Composer's ClassLoader, which is good for development as it does not break + * when code is moved in the file system. You can also decorate the base class + * loader with another cached solution than the Symfony APC class loader, as + * all production sites should have a cached class loader of some sort enabled. + * + * To do so, you may decorate and replace the local $class_loader variable. For + * example, to use Symfony's APC class loader without automatic detection, + * uncomment the code below. + */ +/* +if ($settings['hash_salt']) { + $prefix = 'drupal.' . hash('sha256', 'drupal.' . $settings['hash_salt']); + $apc_loader = new \Symfony\Component\ClassLoader\ApcClassLoader($prefix, $class_loader); + unset($prefix); + $class_loader->unregister(); + $apc_loader->register(); + $class_loader = $apc_loader; +} +*/ + +/** + * Authorized file system operations: + * + * The Update Manager module included with Drupal provides a mechanism for + * site administrators to securely install missing updates for the site + * directly through the web user interface. On securely-configured servers, + * the Update manager will require the administrator to provide SSH or FTP + * credentials before allowing the installation to proceed; this allows the + * site to update the new files as the user who owns all the Drupal files, + * instead of as the user the webserver is running as. On servers where the + * webserver user is itself the owner of the Drupal files, the administrator + * will not be prompted for SSH or FTP credentials (note that these server + * setups are common on shared hosting, but are inherently insecure). + * + * Some sites might wish to disable the above functionality, and only update + * the code directly via SSH or FTP themselves. This setting completely + * disables all functionality related to these authorized file operations. + * + * @see https://www.drupal.org/node/244924 + * + * Remove the leading hash signs to disable. + */ +# $settings['allow_authorize_operations'] = FALSE; + +/** + * Default mode for directories and files written by Drupal. + * + * Value should be in PHP Octal Notation, with leading zero. + */ +# $settings['file_chmod_directory'] = 0775; +# $settings['file_chmod_file'] = 0664; + +/** + * Public file base URL: + * + * An alternative base URL to be used for serving public files. This must + * include any leading directory path. + * + * A different value from the domain used by Drupal to be used for accessing + * public files. This can be used for a simple CDN integration, or to improve + * security by serving user-uploaded files from a different domain or subdomain + * pointing to the same server. Do not include a trailing slash. + */ +# $settings['file_public_base_url'] = 'http://downloads.example.com/files'; + +/** + * Public file path: + * + * A local file system path where public files will be stored. This directory + * must exist and be writable by Drupal. This directory must be relative to + * the Drupal installation directory and be accessible over the web. + */ +# $settings['file_public_path'] = 'sites/default/files'; + +/** + * Private file path: + * + * A local file system path where private files will be stored. This directory + * must be absolute, outside of the Drupal installation directory and not + * accessible over the web. + * + * Note: Caches need to be cleared when this value is changed to make the + * private:// stream wrapper available to the system. + * + * See https://www.drupal.org/documentation/modules/file for more information + * about securing private files. + */ +# $settings['file_private_path'] = ''; + +/** + * Session write interval: + * + * Set the minimum interval between each session write to database. + * For performance reasons it defaults to 180. + */ +# $settings['session_write_interval'] = 180; + +/** + * String overrides: + * + * To override specific strings on your site with or without enabling the Locale + * module, add an entry to this list. This functionality allows you to change + * a small number of your site's default English language interface strings. + * + * Remove the leading hash signs to enable. + * + * The "en" part of the variable name, is dynamic and can be any langcode of + * any added language. (eg locale_custom_strings_de for german). + */ +# $settings['locale_custom_strings_en'][''] = array( +# 'forum' => 'Discussion board', +# '@count min' => '@count minutes', +# ); + +/** + * A custom theme for the offline page: + * + * This applies when the site is explicitly set to maintenance mode through the + * administration page or when the database is inactive due to an error. + * The template file should also be copied into the theme. It is located inside + * 'core/modules/system/templates/maintenance-page.html.twig'. + * + * Note: This setting does not apply to installation and update pages. + */ +# $settings['maintenance_theme'] = 'bartik'; + +/** + * PHP settings: + * + * To see what PHP settings are possible, including whether they can be set at + * runtime (by using ini_set()), read the PHP documentation: + * http://php.net/manual/ini.list.php + * See \Drupal\Core\DrupalKernel::bootEnvironment() for required runtime + * settings and the .htaccess file for non-runtime settings. + * Settings defined there should not be duplicated here so as to avoid conflict + * issues. + */ + +/** + * If you encounter a situation where users post a large amount of text, and + * the result is stripped out upon viewing but can still be edited, Drupal's + * output filter may not have sufficient memory to process it. If you + * experience this issue, you may wish to uncomment the following two lines + * and increase the limits of these variables. For more information, see + * http://php.net/manual/pcre.configuration.php. + */ +# ini_set('pcre.backtrack_limit', 200000); +# ini_set('pcre.recursion_limit', 200000); + +/** + * Active configuration settings. + * + * By default, the active configuration is stored in the database in the + * {config} table. To use a different storage mechanism for the active + * configuration, do the following prior to installing: + * - Create an "active" directory and declare its path in $config_directories + * as explained under the 'Location of the site configuration files' section + * above in this file. To enhance security, you can declare a path that is + * outside your document root. + * - Override the 'bootstrap_config_storage' setting here. It must be set to a + * callable that returns an object that implements + * \Drupal\Core\Config\StorageInterface. + * - Override the service definition 'config.storage.active'. Put this + * override in a services.yml file in the same directory as settings.php + * (definitions in this file will override service definition defaults). + */ +# $settings['bootstrap_config_storage'] = array('Drupal\Core\Config\BootstrapConfigStorageFactory', 'getFileStorage'); + +/** + * Configuration overrides. + * + * To globally override specific configuration values for this site, + * set them here. You usually don't need to use this feature. This is + * useful in a configuration file for a vhost or directory, rather than + * the default settings.php. + * + * Note that any values you provide in these variable overrides will not be + * viewable from the Drupal administration interface. The administration + * interface displays the values stored in configuration so that you can stage + * changes to other environments that don't have the overrides. + * + * There are particular configuration values that are risky to override. For + * example, overriding the list of installed modules in 'core.extension' is not + * supported as module install or uninstall has not occurred. Other examples + * include field storage configuration, because it has effects on database + * structure, and 'core.menu.static_menu_link_overrides' since this is cached in + * a way that is not config override aware. Also, note that changing + * configuration values in settings.php will not fire any of the configuration + * change events. + */ +# $config['system.file']['path']['temporary'] = '/tmp'; +# $config['system.site']['name'] = 'My Drupal site'; +# $config['system.theme']['default'] = 'stark'; +# $config['user.settings']['anonymous'] = 'Visitor'; + +/** + * Fast 404 pages: + * + * Drupal can generate fully themed 404 pages. However, some of these responses + * are for images or other resource files that are not displayed to the user. + * This can waste bandwidth, and also generate server load. + * + * The options below return a simple, fast 404 page for URLs matching a + * specific pattern: + * - $config['system.performance']['fast_404']['exclude_paths']: A regular + * expression to match paths to exclude, such as images generated by image + * styles, or dynamically-resized images. The default pattern provided below + * also excludes the private file system. If you need to add more paths, you + * can add '|path' to the expression. + * - $config['system.performance']['fast_404']['paths']: A regular expression to + * match paths that should return a simple 404 page, rather than the fully + * themed 404 page. If you don't have any aliases ending in htm or html you + * can add '|s?html?' to the expression. + * - $config['system.performance']['fast_404']['html']: The html to return for + * simple 404 pages. + * + * Remove the leading hash signs if you would like to alter this functionality. + */ +# $config['system.performance']['fast_404']['exclude_paths'] = '/\/(?:styles)|(?:system\/files)\//'; +# $config['system.performance']['fast_404']['paths'] = '/\.(?:txt|png|gif|jpe?g|css|js|ico|swf|flv|cgi|bat|pl|dll|exe|asp)$/i'; +# $config['system.performance']['fast_404']['html'] = '<!DOCTYPE html><html><head><title>404 Not Found</title></head><body><h1>Not Found</h1><p>The requested URL "@path" was not found on this server.</p></body></html>'; + +/** + * Load services definition file. + */ +$settings['container_yamls'][] = $app_root . '/' . $site_path . '/services.yml'; + +/** + * Override the default service container class. + * + * This is useful for example to trace the service container for performance + * tracking purposes, for testing a service container with an error condition or + * to test a service container that throws an exception. + */ +# $settings['container_base_class'] = '\Drupal\Core\DependencyInjection\Container'; + +/** + * Override the default yaml parser class. + * + * Provide a fully qualified class name here if you would like to provide an + * alternate implementation YAML parser. The class must implement the + * \Drupal\Component\Serialization\SerializationInterface interface. + */ +# $settings['yaml_parser_class'] = NULL; + +/** + * Trusted host configuration. + * + * Drupal core can use the Symfony trusted host mechanism to prevent HTTP Host + * header spoofing. + * + * To enable the trusted host mechanism, you enable your allowable hosts + * in $settings['trusted_host_patterns']. This should be an array of regular + * expression patterns, without delimiters, representing the hosts you would + * like to allow. + * + * For example: + * @code + * $settings['trusted_host_patterns'] = array( + * '^www\.example\.com$', + * ); + * @endcode + * will allow the site to only run from www.example.com. + * + * If you are running multisite, or if you are running your site from + * different domain names (eg, you don't redirect http://www.example.com to + * http://example.com), you should specify all of the host patterns that are + * allowed by your site. + * + * For example: + * @code + * $settings['trusted_host_patterns'] = array( + * '^example\.com$', + * '^.+\.example\.com$', + * '^example\.org$', + * '^.+\.example\.org$', + * ); + * @endcode + * will allow the site to run off of all variants of example.com and + * example.org, with all subdomains included. + */ + +/** + * The default list of directories that will be ignored by Drupal's file API. + * + * By default ignore node_modules and bower_components folders to avoid issues + * with common frontend tools and recursive scanning of directories looking for + * extensions. + * + * @see file_scan_directory() + * @see \Drupal\Core\Extension\ExtensionDiscovery::scanDirectory() + */ +$settings['file_scan_ignore_directories'] = [ + 'node_modules', + 'bower_components', +]; + +/** + * The default number of entities to update in a batch process. + * + * This is used by update and post-update functions that need to go through and + * change all the entities on a site, so it is useful to increase this number + * if your hosting configuration (i.e. RAM allocation, CPU speed) allows for a + * larger number of entities to be processed in a single batch run. + */ +$settings['entity_update_batch_size'] = 50; + +/** + * Load local development override configuration, if available. + * + * Use settings.local.php to override variables on secondary (staging, + * development, etc) installations of this site. Typically used to disable + * caching, JavaScript/CSS compression, re-routing of outgoing emails, and + * other things that should not happen on development and testing sites. + * + * Keep this code block at the end of this file to take full effect. + */ +# +# if (file_exists($app_root . '/' . $site_path . '/settings.local.php')) { +# include $app_root . '/' . $site_path . '/settings.local.php'; +# } diff --git a/share/drupal8/development.services.yml b/share/drupal8/development.services.yml new file mode 100644 index 0000000..d2857c6 --- /dev/null +++ b/share/drupal8/development.services.yml @@ -0,0 +1,9 @@ +# Local development services. +# +# To activate this feature, follow the instructions at the top of the +# 'example.settings.local.php' file, which sits next to this file. +parameters: + http.response.debug_cacheability_headers: true +services: + cache.backend.null: + class: Drupal\Core\Cache\NullBackendFactory diff --git a/share/drupal8/example.settings.local.php b/share/drupal8/example.settings.local.php new file mode 100644 index 0000000..b1f73dd --- /dev/null +++ b/share/drupal8/example.settings.local.php @@ -0,0 +1,115 @@ +<?php + +/** + * @file + * Local development override configuration feature. + * + * To activate this feature, copy and rename it such that its path plus + * filename is 'sites/default/settings.local.php'. Then, go to the bottom of + * 'sites/default/settings.php' and uncomment the commented lines that mention + * 'settings.local.php'. + * + * If you are using a site name in the path, such as 'sites/example.com', copy + * this file to 'sites/example.com/settings.local.php', and uncomment the lines + * at the bottom of 'sites/example.com/settings.php'. + */ + +/** + * Assertions. + * + * The Drupal project primarily uses runtime assertions to enforce the + * expectations of the API by failing when incorrect calls are made by code + * under development. + * + * @see http://php.net/assert + * @see https://www.drupal.org/node/2492225 + * + * If you are using PHP 7.0 it is strongly recommended that you set + * zend.assertions=1 in the PHP.ini file (It cannot be changed from .htaccess + * or runtime) on development machines and to 0 in production. + * + * @see https://wiki.php.net/rfc/expectations + */ +assert_options(ASSERT_ACTIVE, TRUE); +\Drupal\Component\Assertion\Handle::register(); + +/** + * Enable local development services. + */ +$settings['container_yamls'][] = DRUPAL_ROOT . '/sites/development.services.yml'; + +/** + * Show all error messages, with backtrace information. + * + * In case the error level could not be fetched from the database, as for + * example the database connection failed, we rely only on this value. + */ +$config['system.logging']['error_level'] = 'verbose'; + +/** + * Disable CSS and JS aggregation. + */ +$config['system.performance']['css']['preprocess'] = FALSE; +$config['system.performance']['js']['preprocess'] = FALSE; + +/** + * Disable the render cache (this includes the page cache). + * + * Note: you should test with the render cache enabled, to ensure the correct + * cacheability metadata is present. However, in the early stages of + * development, you may want to disable it. + * + * This setting disables the render cache by using the Null cache back-end + * defined by the development.services.yml file above. + * + * Do not use this setting until after the site is installed. + */ +# $settings['cache']['bins']['render'] = 'cache.backend.null'; + +/** + * Disable caching for migrations. + * + * Uncomment the code below to only store migrations in memory and not in the + * database. This makes it easier to develop custom migrations. + */ +# $settings['cache']['bins']['discovery_migration'] = 'cache.backend.memory'; + +/** + * Disable Dynamic Page Cache. + * + * Note: you should test with Dynamic Page Cache enabled, to ensure the correct + * cacheability metadata is present (and hence the expected behavior). However, + * in the early stages of development, you may want to disable it. + */ +# $settings['cache']['bins']['dynamic_page_cache'] = 'cache.backend.null'; + +/** + * Allow test modules and themes to be installed. + * + * Drupal ignores test modules and themes by default for performance reasons. + * During development it can be useful to install test extensions for debugging + * purposes. + */ +$settings['extension_discovery_scan_tests'] = TRUE; + +/** + * Enable access to rebuild.php. + * + * This setting can be enabled to allow Drupal's php and database cached + * storage to be cleared via the rebuild.php page. Access to this page can also + * be gained by generating a query string from rebuild_token_calculator.sh and + * using these parameters in a request to rebuild.php. + */ +$settings['rebuild_access'] = TRUE; + +/** + * Skip file system permissions hardening. + * + * The system module will periodically check the permissions of your site's + * site directory to ensure that it is not writable by the website user. For + * sites that are managed with a version control system, this can cause problems + * when files in that directory such as settings.php are updated, because the + * user pulling in the changes won't have permissions to modify files in the + * directory. + */ +$settings['skip_permissions_hardening'] = TRUE; diff --git a/share/drupal8/example.sites.php b/share/drupal8/example.sites.php new file mode 100644 index 0000000..60afae7 --- /dev/null +++ b/share/drupal8/example.sites.php @@ -0,0 +1,55 @@ +<?php + +/** + * @file + * Configuration file for multi-site support and directory aliasing feature. + * + * This file is required for multi-site support and also allows you to define a + * set of aliases that map hostnames, ports, and pathnames to configuration + * directories in the sites directory. These aliases are loaded prior to + * scanning for directories, and they are exempt from the normal discovery + * rules. See default.settings.php to view how Drupal discovers the + * configuration directory when no alias is found. + * + * Aliases are useful on development servers, where the domain name may not be + * the same as the domain of the live server. Since Drupal stores file paths in + * the database (files, system table, etc.) this will ensure the paths are + * correct when the site is deployed to a live server. + * + * To activate this feature, copy and rename it such that its path plus + * filename is 'sites/sites.php'. + * + * Aliases are defined in an associative array named $sites. The array is + * written in the format: '<port>.<domain>.<path>' => 'directory'. As an + * example, to map https://www.drupal.org:8080/mysite/test to the configuration + * directory sites/example.com, the array should be defined as: + * @code + * $sites = array( + * '8080.www.drupal.org.mysite.test' => 'example.com', + * ); + * @endcode + * The URL, https://www.drupal.org:8080/mysite/test/, could be a symbolic link + * or an Apache Alias directive that points to the Drupal root containing + * index.php. An alias could also be created for a subdomain. See the + * @link https://www.drupal.org/documentation/install online Drupal installation guide @endlink + * for more information on setting up domains, subdomains, and subdirectories. + * + * The following examples look for a site configuration in sites/example.com: + * @code + * URL: http://dev.drupal.org + * $sites['dev.drupal.org'] = 'example.com'; + * + * URL: http://localhost/example + * $sites['localhost.example'] = 'example.com'; + * + * URL: http://localhost:8080/example + * $sites['8080.localhost.example'] = 'example.com'; + * + * URL: https://www.drupal.org:8080/mysite/test/ + * $sites['8080.www.drupal.org.mysite.test'] = 'example.com'; + * @endcode + * + * @see default.settings.php + * @see \Drupal\Core\DrupalKernel::getSitePath() + * @see https://www.drupal.org/documentation/install/multi-site + */ |