diff options
Diffstat (limited to 'libs')
-rwxr-xr-x | libs/libdc1394/libdc1394.SlackBuild | 118 | ||||
-rw-r--r-- | libs/libdc1394/slack-required | 1 | ||||
-rwxr-xr-x | libs/libevent/libevent.SlackBuild | 111 | ||||
-rwxr-xr-x | libs/libexif-gtk/libexif-gtk.SlackBuild | 124 | ||||
-rwxr-xr-x | libs/libgc/libgc.SlackBuild | 118 | ||||
-rwxr-xr-x | libs/media/cmt/cmt.SlackBuild | 131 | ||||
-rw-r--r-- | libs/media/cmt/slack-required | 1 |
7 files changed, 0 insertions, 604 deletions
diff --git a/libs/libdc1394/libdc1394.SlackBuild b/libs/libdc1394/libdc1394.SlackBuild deleted file mode 100755 index b8ea1dd6..00000000 --- a/libs/libdc1394/libdc1394.SlackBuild +++ /dev/null @@ -1,118 +0,0 @@ -#!/bin/bash -# -# slackbuild script for pwlib -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libdc1394 are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap -# else -# echo Sleeping 3 seconds... -# sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libdc1394" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=1.2.1} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://ufpr.dl.sourceforge.net/sourceforge/libdc1394/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR --with-docdir=/usr/doc/$PACKAGE-$VERSION -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libdc1394: libdc1394 (Libdc1394 is a library for control of 1394 cameras) -libdc1394: -libdc1394: libdc1394 is a library that is intended to provide a high level -libdc1394: programming interface for application developers who wish to control -libdc1394: IEEE 1394 based cameras that conform to the 1394-based Digital Camera -libdc1394: Specification (found at http://www.1394ta.org/). -libdc1394: -libdc1394: -libdc1394: -libdc1394: http://damien.douxchamps.net/ieee1394/libdc1394/ -libdc1394: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in AUTHORS COPYING ChangeLog INSTALL NEWS README;do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libdc1394/slack-required b/libs/libdc1394/slack-required deleted file mode 100644 index 8bc743d3..00000000 --- a/libs/libdc1394/slack-required +++ /dev/null @@ -1 +0,0 @@ -libraw1394 diff --git a/libs/libevent/libevent.SlackBuild b/libs/libevent/libevent.SlackBuild deleted file mode 100755 index 75d7b4b8..00000000 --- a/libs/libevent/libevent.SlackBuild +++ /dev/null @@ -1,111 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libevent -# by rhatto at riseup.net -# - -# TODO: check package signature - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libevent" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=1.1b} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://www.monkey.org/~provos/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libevent: libevent (Event notification library) -libevent: -libevent: The libevent API provides a mechanism to execute a callback function -libevent: when a specific event occurs on a file descriptor or after a timeout -libevent: has been reached. Furthermore, libevent also support callbacks due -libevent: to signals or regular timeouts. -libevent: -libevent: -libevent: -libevent: -libevent: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in README; do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -# could not find package licence -echo "Libevent has been released under a 3-clause BSD license." > usr/doc/$PACKAGE-$VERSION/LICENSE - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libexif-gtk/libexif-gtk.SlackBuild b/libs/libexif-gtk/libexif-gtk.SlackBuild deleted file mode 100755 index f4ec012d..00000000 --- a/libs/libexif-gtk/libexif-gtk.SlackBuild +++ /dev/null @@ -1,124 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libexif-gtk -# by rhatto at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libexif-gtk are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap -# else -# echo Sleeping 3 seconds... -# sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="libexif-gtk" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=0.3.5} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - export LDFLAGS="-L/lib64 -L/usr/lib64" - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -# ------- error codes for createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 -ERROR_PATCH=40 - -RTOOL="wget" -PACKAGE_EXT="bz2" -SRC="$PACKAGE-$VERSION.tar.$PACKAGE_EXT" -URL="http://easynews.dl.sourceforge.net/sourceforge/libexif/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf $SRC_DIR/$SRC || exit $ERROR_TAR -cd $PACKAGE-$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff || exit $ERROR_PATCH -fi - -# see http://blog.gmane.org/gmane.comp.graphics.libexif.devel/month=20060101 -export CFLAGS="-I/usr/include/libexif/" - -./configure --prefix=/usr --libdir=$LIBDIR || exit $ERROR_CONF -make || exit $ERROR_MAKE -make DESTDIR=$TMP/package-$PACKAGE install || exit $ERROR_INSTALL - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libexif-gtk: libexif-gtk (library to read and write EXIF data) -libexif-gtk: -libexif-gtk: Libexif reads and writes EXIF metainformation from and to image -libexif-gtk: files. -libexif-gtk: -libexif-gtk: -libexif-gtk: -libexif-gtk: -libexif-gtk: -libexif-gtk: -libexif-gtk: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -DOCS="ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL NEWS README" - -for file in $DOCS; do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/libgc/libgc.SlackBuild b/libs/libgc/libgc.SlackBuild deleted file mode 100755 index c31d8281..00000000 --- a/libs/libgc/libgc.SlackBuild +++ /dev/null @@ -1,118 +0,0 @@ -#!/bin/bash -# -# slackbuild script for libgc -# by rafael at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building libgc are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap -# else -# echo Sleeping 3 seconds... -# sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="gc" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=6.8} -BUILD=${BUILD:=1rd} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -RTOOL="wget" -PACKAGE_EXT="gz" -SRC="$PACKAGE$VERSION.tar.$PACKAGE_EXT" -URL="http://www.hpl.hp.com/personal/Hans_Boehm/gc/gc_source/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$PACKAGE_EXT" == "bz2" ]; then - tarflag="j" -else - tarflag="z" -fi - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf$tarflag $SRC_DIR/$SRC -cd $PACKAGE$VERSION - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -./configure --prefix=/usr --sysconfdir=/etc --libdir=$LIBDIR --with-docdir=/usr/doc/$PACKAGE-$VERSION -make || exit 32 -make DESTDIR=$TMP/package-$PACKAGE install - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -libgc: libgc (libgc is portable garbage colector library) -libgc: -libgc: The Boehm-Demers-Weiser conservative garbage collector can be used as -libgc: a garbage collecting replacement for C malloc or C++ new. It allows -libgc: you to allocate memory basically as you normally would, without -libgc: explicitly deallocating memory that is no longer useful. The -libgc: collector automatically recycles memory when it determines that it -libgc: can no longer be otherwise accessed. -libgc: -libgc: http://www.hpl.hp.com/personal/Hans_Boehm/gc/ -libgc: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -for file in README;do - cp $CWD/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/lib$PACKAGE-$VERSION-$ARCH-$BUILD.tgz - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/media/cmt/cmt.SlackBuild b/libs/media/cmt/cmt.SlackBuild deleted file mode 100755 index 8e69e4a2..00000000 --- a/libs/media/cmt/cmt.SlackBuild +++ /dev/null @@ -1,131 +0,0 @@ -#!/bin/bash -# -# slackbuild script for cmt -# by rhatto at riseup.net -# - -if [ -s "slack-required" ]; then - echo Recomended and required packages for building cmt are: - cat slack-required | sed -e 's/^/\t/' - if [ "$INTERACT" != "no" ]; then - echo If you dont have those installed, press Ctrl-C. Otherwise, hit ENTER. - read crap -# else -# echo Sleeping 3 seconds... -# sleep 3 - fi -fi - -CWD="`pwd`" - -if [ -f ~/.slackbuildrc ]; then - source ~/.slackbuildrc -elif [ -f /etc/slackbuildrc ]; then - source /etc/slackbuildrc -fi - -# default settings -PACKAGE="cmt" -ARCH=${ARCH:=i486} -VERSION=${VERSION:=1.15} -BUILD=${BUILD:=1rha} -SRC_DIR=${SRC:=$CWD} -TMP=${TMP:=/tmp} -REPOS=${REPOS:=$TMP} - -if [ "$ARCH" == "x86_64" ]; then - export LDFLAGS="-L/lib64 -L/usr/lib64" - LIBDIR=/usr/lib64 -else - LIBDIR=/usr/lib -fi - -# ------- error codes for createpkg -------------- -ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 -ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 -ERROR_TAR=37; ERROR_MKPKG=38 - -RTOOL="wget" -PACKAGE_EXT="tgz" -SRC="$PACKAGE"_src_"$VERSION.$PACKAGE_EXT" -URL="http://www.ladspa.org/download/$SRC" - -SRC_DIR="$SRC_DIR/$PACKAGE" -mkdir -p $SRC_DIR - -if [ "$RTOOL" == "wget" ] && [ ! -f "$SRC_DIR/$SRC" ]; then - wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET -fi - -TMP="$TMP/$PACKAGE" -rm -rf $TMP -mkdir -p $TMP -cd $TMP - -tar xvf $SRC_DIR/$SRC || exit $ERROR_TAR -cd $PACKAGE - -if [ -f "$CWD/$PACKAGE-$VERSION.diff" ]; then - patch -p1 < $CWD/$PACKAGE-$VERSION.diff -fi - -cd src - -sed -e 's/\/usr\/local\/lib\/ladspa\//\/usr\/lib\/ladspa\//' makefile > makefile.tmp || exit $ERROR_CONF - -echo "PREFIX = $TMP/package-$PACKAGE" >> makefile.tmp || exit $ERROR_CONF - -sed -e 's/cp $(PLUGIN_LIB) $(INSTALL_PLUGINS_DIR)/cp $(PLUGIN_LIB) $(PREFIX)\/$(INSTALL_PLUGINS_DIR)/g' \ - makefile.tmp > makefile || exit $ERROR_CONF - -mkdir -p $TMP/package-$PACKAGE/usr/lib/ladspa - -make || exit $ERROR_MAKE -make install || exit $ERROR_INSTALL -cd .. - -CWD="`pwd`" - -cd $TMP/package-$PACKAGE - -find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null -find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null - -mkdir install -cat << EOF > install/slack-desc -# HOW TO EDIT THIS FILE: -# The "handy ruler" below makes it easier to edit a package description. Line -# up the first '|' above the ':' following the base package name, and the '|' -# on the right side marks the last column you can put a character in. You must -# make exactly 11 lines for the formatting to be correct. It's also -# customary to leave one space after the ':'. - - |-----handy-ruler-----------------------------------------------------| -cmt: cmt (ladspa plugin package) -cmt: -cmt: The Computer Music Toolkit (CMT) is a collection of LADSPA plugins -cmt: for use with software synthesis and recording packages on Linux. -cmt: -cmt: -cmt: -cmt: -cmt: -cmt: -cmt: -EOF - -# docs -mkdir -p usr/doc/$PACKAGE-$VERSION - -DOCS="COPYING *html" - -for file in $DOCS; do - cp $CWD/docs/$file* usr/doc/$PACKAGE-$VERSION/ -done - -makepkg -c y -l y $REPOS/$PACKAGE-$VERSION-$ARCH-$BUILD.tgz || exit $ERROR_MKPKG - -if [ "$CLEANUP" == "yes" ]; then - rm -rf $TMP -fi - diff --git a/libs/media/cmt/slack-required b/libs/media/cmt/slack-required deleted file mode 100644 index 6c92f463..00000000 --- a/libs/media/cmt/slack-required +++ /dev/null @@ -1 +0,0 @@ -ladspa |