diff options
Diffstat (limited to 'app')
-rwxr-xr-x | app/cdr/k9copy/k9copy.SlackBuild | 6 | ||||
-rw-r--r-- | app/doc/xmltoman/slack-required | 4 | ||||
-rw-r--r-- | app/doc/xmltoman/xmltoman.SlackBuild | 153 | ||||
-rw-r--r-- | app/text/gnome-doc-utils/gnome-doc-utils.SlackBuild | 149 | ||||
-rw-r--r-- | app/text/rarian/rarian.SlackBuild | 149 |
5 files changed, 459 insertions, 2 deletions
diff --git a/app/cdr/k9copy/k9copy.SlackBuild b/app/cdr/k9copy/k9copy.SlackBuild index a5fa322f..e47f64ca 100755 --- a/app/cdr/k9copy/k9copy.SlackBuild +++ b/app/cdr/k9copy/k9copy.SlackBuild @@ -39,7 +39,7 @@ TMP=${TMP:=/tmp} PKG=${PKG:=$TMP/package-$PKG_NAME} REPOS=${REPOS:=$TMP} PREFIX=${PREFIX:=/usr} -PKG_SRC="$TMP/$SRC_NAME-$SRC_VERSION" +PKG_WORK="$TMP/$SRC_NAME" CONF_OPTIONS=${CONF_OPTIONS:=""} NUMJOBS=${NUMJOBS:="-j7"} @@ -73,6 +73,7 @@ rm -rf "$PKG" 2> /dev/null mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR mkdir -p "$PKG" || exit $ERROR_MKDIR mkdir -p "$REPOS" || exit $ERROR_MKDIR +mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR # Dowload source if necessary SRC="$SRC_NAME-$VERSION.tar.gz" @@ -84,8 +85,9 @@ fi # Untar -cd "$TMP" +cd "$PKG_WORK" tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR +PKG_SRC=`ls -l | awk '/^d/ { print $8 }'` cd "$PKG_SRC" # Configure diff --git a/app/doc/xmltoman/slack-required b/app/doc/xmltoman/slack-required new file mode 100644 index 00000000..3514efa9 --- /dev/null +++ b/app/doc/xmltoman/slack-required @@ -0,0 +1,4 @@ +# Dependency list to xmltoman +# +# dependency [condition] [version]] +perl diff --git a/app/doc/xmltoman/xmltoman.SlackBuild b/app/doc/xmltoman/xmltoman.SlackBuild new file mode 100644 index 00000000..fc55200e --- /dev/null +++ b/app/doc/xmltoman/xmltoman.SlackBuild @@ -0,0 +1,153 @@ +#!/bin/bash +# +# xmltoman.SlackBuild is free software; you can redistribute +# it and/or modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of the License, +# or any later version. +# +# xmltoman.SlackBuild is distributed in the hope that it will +# be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +# Public License for more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., 59 Temple +# Place - Suite 330, Boston, MA 02111-1307, USA +# +# slackbuild for xmltoman, by Rudson R. Alves +# requires: perl +# tested: xmltoman-0.3 +# + +# Look for slackbuildrc +if [ -f ~/.slackbuildrc ]; then + source ~/.slackbuildrc +elif [ -f /etc/slackbuildrc ]; then + source /etc/slackbuildrc +fi + +# Set variables +CWD="$(pwd)" +SRC_NAME="xmltoman" +PKG_NAME="xmltoman" +ARCH=${ARCH:=i486} +SRC_VERSION=${VERSION:=0.3} +PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')" +BUILD=${BUILD:=1rra} +SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME +TMP=${TMP:=/tmp} +PKG=${PKG:=$TMP/package-$PKG_NAME} +REPOS=${REPOS:=$TMP} +PREFIX=${PREFIX:=/usr} +PKG_SRC="$TMP/$SRC_NAME-$SRC_VERSION" +CONF_OPTIONS=${CONF_OPTIONS:=""} +NUMJOBS=${NUMJOBS:="-j7"} + +# Set system libraries' path and optmization flags based on $ARCH +LIBDIR="$PREFIX/lib" + +if [ "$ARCH" = "i386" ]; then + SLKCFLAGS="-O2 -march=i386 -mcpu=i686" +elif [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mcpu=i686" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2" + LIBDIR="$PREFIX/lib64" +fi + +# Set error codes (used by createpkg) +ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 +ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 +ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 +ERROR_PATCH=40; ERROR_VCS=41; ERROR_MKDIR=42 + +# Clean up any leftovers of previous builds +rm -rf "$PKG_SRC" 2> /dev/null +rm -rf "$PKG" 2> /dev/null + +# Create directories if necessary +mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR +mkdir -p "$PKG" || exit $ERROR_MKDIR +mkdir -p "$REPOS" || exit $ERROR_MKDIR + +# Dowload source if necessary +SRC="${SRC_NAME}_$VERSION.orig.tar.gz" +URL="http://ftp.debian.org/debian/pool/main/x/xmltoman/$SRC" + +if [ ! -s "$SRC_DIR/$SRC" ] || ! "$SRC_DIR/$SRC" 2> /dev/null; then + wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET +fi + + +# Untar +cd "$TMP" +tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR +cd "$PKG_SRC" + +# Patch source +patches="http://ftp.debian.org/debian/pool/main/x/xmltoman/xmltoman_0.3-1.diff.gz + $PKG_NAME.diff $PKG_NAME-$PKG_VERSION.diff + $PKG_NAME-$PKG_VERSION-$ARCH.diff $PKG_NAME-$ARCH.diff" +for patch in $patches; do + if [ -f "$CWD/$patch" ]; then + patch -Np[[NUMBER OF PREFIX SLASHES TO STRIP]] < "$CWD/$patch" || exit $ERROR_PATCH + elif [ -f "$CWD/patches/$patch" ]; then + patch -Np[[NUMBER OF PREFIX SLASHES TO STRIP]] < "$CWD/patches/$patch" || exit $ERROR_PATCH + fi +done + +# Buils package +make PREFIX=$PREFIX + +# Install package +make install PREFIX=$PKG/usr + +# Strip binaries +( cd "$PKG" + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null +) + +# Install documentation +DOCS="NEWS TODO README AUTHORS INSTALL ChangeLog MAINTAINERS COPYING readme.*" +mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR +cp -a $DOCS "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" + +# Add package description (slack-desc) +mkdir -p "$PKG/install" || exit $ERROR_MKDIR +cat << EODESC > "$PKG/install/slack-desc" +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-----------------------------------------------------| +xmltoman: xmltoman by Slack.Sarava +xmltoman: +xmltoman: xmltoman and xmlmantohtml are two small scripts to convert xml to +xmltoman: man pages in groff format or html. It features the usual man page +xmltoman: items such a "description", "options", "see also" etc. +xmltoman: +xmltoman: +xmltoman: +xmltoman: +xmltoman: +xmltoman: +EODESC + +# Build the package +cd "$PKG" +makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG + +# Delete source and build directories if requested +if [ "$CLEANUP" == "yes" ]; then + rm -rf "$PKG_SRC" "$PKG" +fi diff --git a/app/text/gnome-doc-utils/gnome-doc-utils.SlackBuild b/app/text/gnome-doc-utils/gnome-doc-utils.SlackBuild new file mode 100644 index 00000000..5a75d5f3 --- /dev/null +++ b/app/text/gnome-doc-utils/gnome-doc-utils.SlackBuild @@ -0,0 +1,149 @@ +#!/bin/bash +# +# gnome-doc-utils.SlackBuild is free software; you can redistribute +# it and/or modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of the License, +# or any later version. +# +# gnome-doc-utils.SlackBuild is distributed in the hope that it will +# be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +# Public License for more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., 59 Temple +# Place - Suite 330, Boston, MA 02111-1307, USA +# +# slackbuild for gnome-doc-utils, by Rudson R. Alves +# requires: +# tested: gnome-doc-utils-0.12.0 +# + +# Look for slackbuildrc +if [ -f ~/.slackbuildrc ]; then + source ~/.slackbuildrc +elif [ -f /etc/slackbuildrc ]; then + source /etc/slackbuildrc +fi + +# Set variables +CWD="$(pwd)" +SRC_NAME="gnome-doc-utils" +PKG_NAME="gnome-doc-utils" +ARCH=${ARCH:=i486} +SRC_VERSION=${VERSION:=0.12.0} +PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')" +BUILD=${BUILD:=1rra} +SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME +TMP=${TMP:=/tmp} +PKG=${PKG:=$TMP/package-$PKG_NAME} +REPOS=${REPOS:=$TMP} +PREFIX=${PREFIX:=/usr} +PKG_WORK="$TMP/$SRC_NAME" +CONF_OPTIONS=${CONF_OPTIONS:=""} +NUMJOBS=${NUMJOBS:="-j7"} + +# Set system libraries' path and optmization flags based on $ARCH +LIBDIR="$PREFIX/lib" + +if [ "$ARCH" = "i386" ]; then + SLKCFLAGS="-O2 -march=i386 -mcpu=i686" +elif [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mcpu=i686" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2" + LIBDIR="$PREFIX/lib64" +fi + +# Set error codes (used by createpkg) +ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 +ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 +ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 +ERROR_PATCH=40; ERROR_VCS=41; ERROR_MKDIR=42 + +# Clean up any leftovers of previous builds +rm -rf "$PKG_SRC" 2> /dev/null +rm -rf "$PKG" 2> /dev/null + +# Create directories if necessary +mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR +mkdir -p "$PKG" || exit $ERROR_MKDIR +mkdir -p "$REPOS" || exit $ERROR_MKDIR +mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR + +# Dowload source if necessary +SRC="$SRC_NAME-$VERSION.tar.bz2" +URL="http://ftp.acc.umu.se/pub/gnome/sources/gnome-doc-utils/0.12/$SRC" + +if [ ! -s "$SRC_DIR/$SRC" ] || ! bunzip2 -t "$SRC_DIR/$SRC" 2> /dev/null; then + wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET +fi + + +# Untar +cd "$PKG_WORK" +tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR +PKG_SRC=`ls -l | awk '/^d/ { print $8 }'` +cd "$PKG_SRC" + +# Configure +CFLAGS="$SLKCFLAGS" \ + CXXFLAGS="$SLKCFLAGS" \ + ./configure \ + --prefix="$PREFIX" --libdir="$LIBDIR" $CONF_OPTIONS || exit $ERROR_CONF + +# Compile +make $NUMJOBS || exit $ERROR_MAKE + +# Install +make install DESTDIR="$PKG" || exit $ERROR_INSTALL + +# Strip binaries +( cd "$PKG" + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null +) + +# Install documentation +DOCS="AUTHORS COPYING COPYING.GPL COPYING.LGPL ChangeLog INSTALL NEWS README" +mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR +cp -a $DOCS "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" + +# Add package description (slack-desc) +mkdir -p "$PKG/install" || exit $ERROR_MKDIR +cat << EODESC > "$PKG/install/slack-desc" +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler----------------------------------------------| +gnome-doc-utils: gnome-doc-utils by Slack.Sarava +gnome-doc-utils: +gnome-doc-utils: gnome-doc-utils is a collection of documentation utilities for +gnome-doc-utils: the Gnome project. Notably, it contains utilities for +gnome-doc-utils: building documentation and all auxiliary files in your source +gnome-doc-utils: tree, and it contains the DocBook XSLT stylesheets that were +gnome-doc-utils: once distributed with Yelp. Starting with Gnome 2.8, Yelp +gnome-doc-utils: will require gnome-doc-utils for the XSLT. +gnome-doc-utils: +gnome-doc-utils: +gnome-doc-utils: +EODESC + +# Build the package +cd "$PKG" +makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG + +# Delete source and build directories if requested +if [ "$CLEANUP" == "yes" ]; then + rm -rf "$PKG_SRC" "$PKG" +fi diff --git a/app/text/rarian/rarian.SlackBuild b/app/text/rarian/rarian.SlackBuild new file mode 100644 index 00000000..e1518247 --- /dev/null +++ b/app/text/rarian/rarian.SlackBuild @@ -0,0 +1,149 @@ +#!/bin/bash +# +# rarian.SlackBuild is free software; you can redistribute +# it and/or modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of the License, +# or any later version. +# +# rarian.SlackBuild is distributed in the hope that it will +# be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +# Public License for more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., 59 Temple +# Place - Suite 330, Boston, MA 02111-1307, USA +# +# slackbuild for rarian, by Rudson R. Alves +# requires: +# tested: rarian-0.6.0 +# + +# Look for slackbuildrc +if [ -f ~/.slackbuildrc ]; then + source ~/.slackbuildrc +elif [ -f /etc/slackbuildrc ]; then + source /etc/slackbuildrc +fi + +# Set variables +CWD="$(pwd)" +SRC_NAME="rarian" +PKG_NAME="rarian" +ARCH=${ARCH:=i486} +SRC_VERSION=${VERSION:=0.6.0} +PKG_VERSION="$(echo "$SRC_VERSION" | tr '[[:blank:]-]' '_')" +BUILD=${BUILD:=1rra} +SRC_DIR=${SRC_DIR:=$CWD}/$PKG_NAME +TMP=${TMP:=/tmp} +PKG=${PKG:=$TMP/package-$PKG_NAME} +REPOS=${REPOS:=$TMP} +PREFIX=${PREFIX:=/usr} +PKG_WORK="$TMP/$SRC_NAME" +CONF_OPTIONS=${CONF_OPTIONS:="--sysconfdir=/etc --localstatedir=/var --disable-static --program-prefix= --program-suffix= --build=$ARCH-slackware-linux"} +NUMJOBS=${NUMJOBS:="-j7"} + +# Set system libraries' path and optmization flags based on $ARCH +LIBDIR="$PREFIX/lib" + +if [ "$ARCH" = "i386" ]; then + SLKCFLAGS="-O2 -march=i386 -mcpu=i686" +elif [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mcpu=i686" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2" + LIBDIR="$PREFIX/lib64" +fi + +# Set error codes (used by createpkg) +ERROR_WGET=31; ERROR_MAKE=32; ERROR_INSTALL=33 +ERROR_MD5=34; ERROR_CONF=35; ERROR_HELP=36 +ERROR_TAR=37; ERROR_MKPKG=38; ERROR_GPG=39 +ERROR_PATCH=40; ERROR_VCS=41; ERROR_MKDIR=42 + +# Clean up any leftovers of previous builds +rm -rf "$PKG_SRC" 2> /dev/null +rm -rf "$PKG" 2> /dev/null + +# Create directories if necessary +mkdir -p "$SRC_DIR" || exit $ERROR_MKDIR +mkdir -p "$PKG" || exit $ERROR_MKDIR +mkdir -p "$REPOS" || exit $ERROR_MKDIR +mkdir -p "$PKG_WORK" || exit $ERROR_MKDIR + +# Dowload source if necessary +SRC="$SRC_NAME-$VERSION.tar.bz2" +URL="http://ftp.acc.umu.se/pub/gnome/sources/rarian/0.6/$SRC" + +if [ ! -s "$SRC_DIR/$SRC" ] || ! bunzip2 -t "$SRC_DIR/$SRC" 2> /dev/null; then + wget "$URL" -O "$SRC_DIR/$SRC" || exit $ERROR_WGET +fi + + +# Untar +cd "$PKG_WORK" +tar --no-same-owner --no-same-permissions -xvf "$SRC_DIR/$SRC" || exit $ERROR_TAR +PKG_SRC=`ls -l | awk '/^d/ { print $8 }'` +cd "$PKG_SRC" + +# Configure +CFLAGS="$SLKCFLAGS" \ + CXXFLAGS="$SLKCFLAGS" \ + ./configure \ + --prefix="$PREFIX" --libdir="$LIBDIR" $CONF_OPTIONS || exit $ERROR_CONF + +# Compile +make $NUMJOBS || exit $ERROR_MAKE + +# Install +make install DESTDIR="$PKG" || exit $ERROR_INSTALL + +# Strip binaries +( cd "$PKG" + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null +) + +# Install documentation +DOCS="AUTHORS COPYING COPYING.LIB COPYING.UTILS ChangeLog INSTALL NEWS README TODO" +mkdir -p "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" || exit $ERROR_MKDIR +cp -a $DOCS "$PKG/usr/doc/$PKG_NAME-$PKG_VERSION" + +# Add package description (slack-desc) +mkdir -p "$PKG/install" || exit $ERROR_MKDIR +cat << EODESC > "$PKG/install/slack-desc" +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler-------------------------------------------------------| +rarian: rarian by Slack.Sarava +rarian: +rarian: Rarian is designed to be a replacement for scrollkeeper. It is +rarian: currently undergoing heavy development. As of writing, rarian can be +rarian: installed in place of scrollkeeper and everything will work okay (as +rarian: far as my testing indicates) +rarian: +rarian: +rarian: +rarian: +rarian: +EODESC + +# Build the package +cd "$PKG" +makepkg -l y -c n "$REPOS/$PKG_NAME-$PKG_VERSION-$ARCH-$BUILD.tgz" || exit $ERROR_MKPKG + +# Delete source and build directories if requested +if [ "$CLEANUP" == "yes" ]; then + rm -rf "$PKG_SRC" "$PKG" +fi |