From 0d6bcb2b7d08e3a41481372c1ae0d11868d88b1b Mon Sep 17 00:00:00 2001 From: Silvio Rhatto Date: Sat, 7 Oct 2017 19:32:06 -0300 Subject: New repo layout with git migration --- .../templates/vserver/files/etc/apache/httpd.conf | 1046 ------------------ .../0.6/templates/vserver/files/etc/apache/php.ini | 1122 -------------------- tags/0.6/templates/vserver/files/etc/apache/vhosts | 0 3 files changed, 2168 deletions(-) delete mode 100644 tags/0.6/templates/vserver/files/etc/apache/httpd.conf delete mode 100644 tags/0.6/templates/vserver/files/etc/apache/php.ini delete mode 100644 tags/0.6/templates/vserver/files/etc/apache/vhosts (limited to 'tags/0.6/templates/vserver/files/etc/apache') diff --git a/tags/0.6/templates/vserver/files/etc/apache/httpd.conf b/tags/0.6/templates/vserver/files/etc/apache/httpd.conf deleted file mode 100644 index 7b7115d..0000000 --- a/tags/0.6/templates/vserver/files/etc/apache/httpd.conf +++ /dev/null @@ -1,1046 +0,0 @@ -## -## httpd.conf -- Apache HTTP server configuration file -## - -# -# Based upon the NCSA server configuration files originally by Rob McCool. -# -# This is the main Apache server configuration file. It contains the -# configuration directives that give the server its instructions. -# See for detailed information about -# the directives. -# -# Do NOT simply read the instructions in here without understanding -# what they do. They're here only as hints or reminders. If you are unsure -# consult the online docs. You have been warned. -# -# After this file is processed, the server will look for and process -# /etc/apache/srm.conf and then /etc/apache/access.conf -# unless you have overridden these with ResourceConfig and/or -# AccessConfig directives here. -# -# The configuration directives are grouped into three basic sections: -# 1. Directives that control the operation of the Apache server process as a -# whole (the 'global environment'). -# 2. Directives that define the parameters of the 'main' or 'default' server, -# which responds to requests that aren't handled by a virtual host. -# These directives also provide default values for the settings -# of all virtual hosts. -# 3. Settings for virtual hosts, which allow Web requests to be sent to -# different IP addresses or hostnames and have them handled by the -# same Apache server process. -# -# Configuration and logfile names: If the filenames you specify for many -# of the server's control files begin with "/" (or "drive:/" for Win32), the -# server will use that explicit path. If the filenames do *not* begin -# with "/", the value of ServerRoot is prepended -- so "logs/foo.log" -# with ServerRoot set to "/usr/local/apache" will be interpreted by the -# server as "/usr/local/apache/logs/foo.log". -# - -### Section 1: Global Environment -# -# The directives in this section affect the overall operation of Apache, -# such as the number of concurrent requests it can handle or where it -# can find its configuration files. -# - -# -# ServerType is either inetd, or standalone. Inetd mode is only supported on -# Unix platforms. -# -ServerType standalone - -# ServerTokens directive -ServerTokens ProductOnly - -# -# ServerRoot: The top of the directory tree under which the server's -# configuration, error, and log files are kept. -# -# NOTE! If you intend to place this on an NFS (or otherwise network) -# mounted filesystem then please read the LockFile documentation -# (available at ); -# you will save yourself a lot of trouble. -# -ServerRoot "/usr" - -# -# The LockFile directive sets the path to the lockfile used when Apache -# is compiled with either USE_FCNTL_SERIALIZED_ACCEPT or -# USE_FLOCK_SERIALIZED_ACCEPT. This directive should normally be left at -# its default value. The main reason for changing it is if the logs -# directory is NFS mounted, since the lockfile MUST BE STORED ON A LOCAL -# DISK. The PID of the main server process is automatically appended to -# the filename. -# -#LockFile /var/run/httpd.lock - -# -# PidFile: The file in which the server should record its process -# identification number when it starts. -# -PidFile /var/run/httpd.pid - -# -# ScoreBoardFile: File used to store internal server process information. -# Not all architectures require this. But if yours does (you'll know because -# this file will be created when you run Apache) then you *must* ensure that -# no two invocations of Apache share the same scoreboard file. -# -ScoreBoardFile /var/run/httpd.scoreboard - -# -# In the standard configuration, the server will process httpd.conf (this -# file, specified by the -f command line option), srm.conf, and access.conf -# in that order. The latter two files are now distributed empty, as it is -# recommended that all directives be kept in a single file for simplicity. -# The commented-out values below are the built-in defaults. You can have the -# server ignore these files altogether by using "/dev/null" (for Unix) or -# "nul" (for Win32) for the arguments to the directives. -# -#ResourceConfig /etc/apache/srm.conf -#AccessConfig /etc/apache/access.conf - -# -# Timeout: The number of seconds before receives and sends time out. -# -Timeout 300 - -# -# KeepAlive: Whether or not to allow persistent connections (more than -# one request per connection). Set to "Off" to deactivate. -# -KeepAlive On - -# -# MaxKeepAliveRequests: The maximum number of requests to allow -# during a persistent connection. Set to 0 to allow an unlimited amount. -# We recommend you leave this number high, for maximum performance. -# -MaxKeepAliveRequests 100 - -# -# KeepAliveTimeout: Number of seconds to wait for the next request from the -# same client on the same connection. -# -KeepAliveTimeout 2 - -# -# Server-pool size regulation. Rather than making you guess how many -# server processes you need, Apache dynamically adapts to the load it -# sees --- that is, it tries to maintain enough server processes to -# handle the current load, plus a few spare servers to handle transient -# load spikes (e.g., multiple simultaneous requests from a single -# Netscape browser). -# -# It does this by periodically checking how many servers are waiting -# for a request. If there are fewer than MinSpareServers, it creates -# a new spare. If there are more than MaxSpareServers, some of the -# spares die off. The default values are probably OK for most sites. -# -MinSpareServers 5 -MaxSpareServers 10 - -# -# Number of servers to start initially --- should be a reasonable ballpark -# figure. -# -StartServers 5 - -# -# Limit on total number of servers running, i.e., limit on the number -# of clients who can simultaneously connect --- if this limit is ever -# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. -# It is intended mainly as a brake to keep a runaway server from taking -# the system with it as it spirals down... -# -MaxClients 150 - -# -# MaxRequestsPerChild: the number of requests each child process is -# allowed to process before the child dies. The child will exit so -# as to avoid problems after prolonged use when Apache (and maybe the -# libraries it uses) leak memory or other resources. On most systems, this -# isn't really needed, but a few (such as Solaris) do have notable leaks -# in the libraries. For these platforms, set to something like 10000 -# or so; a setting of 0 means unlimited. -# -# NOTE: This value does not include keepalive requests after the initial -# request per connection. For example, if a child process handles -# an initial request and 10 subsequent "keptalive" requests, it -# would only count as 1 request towards this limit. -# -MaxRequestsPerChild 0 - -# -# Listen: Allows you to bind Apache to specific IP addresses and/or -# ports, instead of the default. See also the -# directive. -# -#Listen 3000 -#Listen 12.34.56.78:80 - -# -# BindAddress: You can support virtual hosts with this option. This directive -# is used to tell the server which IP address to listen to. It can either -# contain "*", an IP address, or a fully qualified Internet domain name. -# See also the and Listen directives. -# -#BindAddress * - -# -# Dynamic Shared Object (DSO) Support -# -# To be able to use the functionality of a module which was built as a DSO you -# have to place corresponding `LoadModule' lines at this location so the -# directives contained in it are actually available _before_ they are used. -# Please read the file http://httpd.apache.org/docs/dso.html for more -# details about the DSO mechanism and run `httpd -l' for the list of already -# built-in (statically linked and thus always available) modules in your httpd -# binary. -# -# Note: The order in which modules are loaded is important. Don't change -# the order below without expert advice. -# -# Example: -# LoadModule foo_module libexec/mod_foo.so -LoadModule vhost_alias_module libexec/apache/mod_vhost_alias.so -#LoadModule env_module libexec/apache/mod_env.so -LoadModule define_module libexec/apache/mod_define.so -LoadModule config_log_module libexec/apache/mod_log_config.so -LoadModule mime_magic_module libexec/apache/mod_mime_magic.so -LoadModule mime_module libexec/apache/mod_mime.so -LoadModule negotiation_module libexec/apache/mod_negotiation.so -#LoadModule status_module libexec/apache/mod_status.so -#LoadModule info_module libexec/apache/mod_info.so -LoadModule includes_module libexec/apache/mod_include.so -LoadModule autoindex_module libexec/apache/mod_autoindex.so -LoadModule dir_module libexec/apache/mod_dir.so -LoadModule cgi_module libexec/apache/mod_cgi.so -#LoadModule asis_module libexec/apache/mod_asis.so -#LoadModule imap_module libexec/apache/mod_imap.so -#LoadModule action_module libexec/apache/mod_actions.so -#LoadModule speling_module libexec/apache/mod_speling.so -#LoadModule userdir_module libexec/apache/mod_userdir.so -LoadModule alias_module libexec/apache/mod_alias.so -LoadModule rewrite_module libexec/apache/mod_rewrite.so -LoadModule access_module libexec/apache/mod_access.so -LoadModule auth_module libexec/apache/mod_auth.so -LoadModule anon_auth_module libexec/apache/mod_auth_anon.so -#LoadModule dbm_auth_module libexec/apache/mod_auth_dbm.so -#LoadModule digest_module libexec/apache/mod_digest.so -LoadModule proxy_module libexec/apache/libproxy.so -LoadModule cern_meta_module libexec/apache/mod_cern_meta.so -LoadModule expires_module libexec/apache/mod_expires.so -LoadModule headers_module libexec/apache/mod_headers.so -#LoadModule usertrack_module libexec/apache/mod_usertrack.so -#LoadModule log_forensic_module libexec/apache/mod_log_forensic.so -#LoadModule unique_id_module libexec/apache/mod_unique_id.so -LoadModule setenvif_module libexec/apache/mod_setenvif.so - -# Reconstruction of the complete module list from all available modules -# (static and shared ones) to achieve correct module execution order. -# [WHENEVER YOU CHANGE THE LOADMODULE SECTION ABOVE UPDATE THIS, TOO] -ClearModuleList -AddModule mod_vhost_alias.c -#AddModule mod_env.c -AddModule mod_define.c -AddModule mod_log_config.c -AddModule mod_mime_magic.c -AddModule mod_mime.c -AddModule mod_negotiation.c -#AddModule mod_status.c -#AddModule mod_info.c -AddModule mod_include.c -AddModule mod_autoindex.c -AddModule mod_dir.c -AddModule mod_cgi.c -#AddModule mod_asis.c -#AddModule mod_imap.c -#AddModule mod_actions.c -#AddModule mod_speling.c -#AddModule mod_userdir.c -AddModule mod_alias.c -AddModule mod_rewrite.c -AddModule mod_access.c -AddModule mod_auth.c -AddModule mod_auth_anon.c -#AddModule mod_auth_dbm.c -#AddModule mod_digest.c -AddModule mod_proxy.c -AddModule mod_cern_meta.c -AddModule mod_expires.c -AddModule mod_headers.c -#AddModule mod_usertrack.c -#AddModule mod_log_forensic.c -#AddModule mod_unique_id.c -AddModule mod_so.c -AddModule mod_setenvif.c - -# -# ExtendedStatus controls whether Apache will generate "full" status -# information (ExtendedStatus On) or just basic information (ExtendedStatus -# Off) when the "server-status" handler is called. The default is Off. -# -#ExtendedStatus On - -### Section 2: 'Main' server configuration -# -# The directives in this section set up the values used by the 'main' -# server, which responds to any requests that aren't handled by a -# definition. These values also provide defaults for -# any containers you may define later in the file. -# -# All of these directives may appear inside containers, -# in which case these default settings will be overridden for the -# virtual host being defined. -# - -# -# If your ServerType directive (set earlier in the 'Global Environment' -# section) is set to "inetd", the next few directives don't have any -# effect since their settings are defined by the inetd configuration. -# Skip ahead to the ServerAdmin directive. -# - -# -# Port: The port to which the standalone server listens. For -# ports < 1023, you will need httpd to be run as root initially. -# -Port 80 - -# -# If you wish httpd to run as a different user or group, you must run -# httpd as root initially and it will switch. -# -# User/Group: The name (or #number) of the user/group to run httpd as. -# . On SCO (ODT 3) use "User nouser" and "Group nogroup". -# . On HPUX you may not be able to use shared memory as nobody, and the -# suggested workaround is to create a user www and use that user. -# NOTE that some kernels refuse to setgid(Group) or semctl(IPC_SET) -# when the value of (unsigned)Group is above 60000; -# don't use Group "#-1" on these systems! -# -User nobody -Group nobody - -# -# ServerAdmin: Your address, where problems with the server should be -# e-mailed. This address appears on some server-generated pages, such -# as error documents. -# -ServerAdmin root@midas.slackware.lan - -# -# ServerName allows you to set a host name which is sent back to clients for -# your server if it's different than the one the program would get (i.e., use -# "www" instead of the host's real name). -# -# Note: You cannot just invent host names and hope they work. The name you -# define here must be a valid DNS name for your host. If you don't understand -# this, ask your network administrator. -# If your host doesn't have a registered DNS name, enter its IP address here. -# You will have to access it by its address (e.g., http://123.45.67.89/) -# anyway, and this will make redirections work in a sensible way. -# -# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your -# machine always knows itself by this address. If you use Apache strictly for -# local testing and development, you may use 127.0.0.1 as the server name. -# -#ServerName www.example.com - -# -# DocumentRoot: The directory out of which you will serve your -# documents. By default, all requests are taken from this directory, but -# symbolic links and aliases may be used to point to other locations. -# -DocumentRoot "/var/www/htdocs" - -# -# Each directory to which Apache has access, can be configured with respect -# to which services and features are allowed and/or disabled in that -# directory (and its subdirectories). -# -# First, we configure the "default" to be a very restrictive set of -# permissions. -# - - Options FollowSymLinks - AllowOverride None - - -# -# Note that from this point forward you must specifically allow -# particular features to be enabled - so if something's not working as -# you might expect, make sure that you have specifically enabled it -# below. -# - -# -# This should be changed to whatever you set DocumentRoot to. -# - - -# -# This may also be "None", "All", or any combination of "Indexes", -# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews". -# -# Note that "MultiViews" must be named *explicitly* --- "Options All" -# doesn't give it to you. -# - Options Indexes FollowSymLinks MultiViews - -# -# This controls which options the .htaccess files in directories can -# override. Can also be "All", or any combination of "Options", "FileInfo", -# "AuthConfig", and "Limit" -# - AllowOverride None - -# -# Controls who can get stuff from this server. -# - Order allow,deny - Allow from all - - -# -# UserDir: The name of the directory which is appended onto a user's home -# directory if a ~user request is received. -# - - UserDir public_html - - -# -# Control access to UserDir directories. The following is an example -# for a site where these directories are restricted to read-only. -# -# -# AllowOverride FileInfo AuthConfig Limit -# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec -# -# Order allow,deny -# Allow from all -# -# -# Order deny,allow -# Deny from all -# -# - -# -# DirectoryIndex: Name of the file or files to use as a pre-written HTML -# directory index. Separate multiple entries with spaces. -# - - DirectoryIndex index.html - - -# -# AccessFileName: The name of the file to look for in each directory -# for access control information. -# -AccessFileName .htaccess - -# -# The following lines prevent .htaccess files from being viewed by -# Web clients. Since .htaccess files often contain authorization -# information, access is disallowed for security reasons. Comment -# these lines out if you want Web visitors to see the contents of -# .htaccess files. If you change the AccessFileName directive above, -# be sure to make the corresponding changes here. -# -# Also, folks tend to use names such as .htpasswd for password -# files, so this will protect those as well. -# - - Order allow,deny - Deny from all - Satisfy All - - -# -# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each -# document that was negotiated on the basis of content. This asks proxy -# servers not to cache the document. Uncommenting the following line disables -# this behavior, and proxies will be allowed to cache the documents. -# -#CacheNegotiatedDocs - -# -# UseCanonicalName: (new for 1.3) With this setting turned on, whenever -# Apache needs to construct a self-referencing URL (a URL that refers back -# to the server the response is coming from) it will use ServerName and -# Port to form a "canonical" name. With this setting off, Apache will -# use the hostname:port that the client supplied, when possible. This -# also affects SERVER_NAME and SERVER_PORT in CGI scripts. -# -UseCanonicalName On - -# -# TypesConfig describes where the mime.types file (or equivalent) is -# to be found. -# - - TypesConfig /etc/apache/mime.types - - -# -# DefaultType is the default MIME type the server will use for a document -# if it cannot otherwise determine one, such as from filename extensions. -# If your server contains mostly text or HTML documents, "text/plain" is -# a good value. If most of your content is binary, such as applications -# or images, you may want to use "application/octet-stream" instead to -# keep browsers from trying to display binary files as though they are -# text. -# -DefaultType text/plain - -# -# The mod_mime_magic module allows the server to use various hints from the -# contents of the file itself to determine its type. The MIMEMagicFile -# directive tells the module where the hint definitions are located. -# mod_mime_magic is not part of the default server (you have to add -# it yourself with a LoadModule [see the DSO paragraph in the 'Global -# Environment' section], or recompile the server and include mod_mime_magic -# as part of the configuration), so it's enclosed in an container. -# This means that the MIMEMagicFile directive will only be processed if the -# module is part of the server. -# - - MIMEMagicFile /etc/apache/magic - - -# -# HostnameLookups: Log the names of clients or just their IP addresses -# e.g., www.apache.org (on) or 204.62.129.132 (off). -# The default is off because it'd be overall better for the net if people -# had to knowingly turn this feature on, since enabling it means that -# each client request will result in AT LEAST one lookup request to the -# nameserver. -# -HostnameLookups Off - -# -# ErrorLog: The location of the error log file. -# If you do not specify an ErrorLog directive within a -# container, error messages relating to that virtual host will be -# logged here. If you *do* define an error logfile for a -# container, that host's errors will be logged there and not here. -# -ErrorLog "| /usr/bin/error-log.sh /var/log/apache/error_log" - -# -# LogLevel: Control the number of messages logged to the error_log. -# Possible values include: debug, info, notice, warn, error, crit, -# alert, emerg. -# -LogLevel warn - -# -# The following directives define some format nicknames for use with -# a CustomLog directive (see below). -# -LogFormat "%l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined -LogFormat "%l %u %t \"%r\" %>s %b" common -LogFormat "%{Referer}i -> %U" referer -LogFormat "%{User-agent}i" agent - -# -# The location and format of the access logfile (Common Logfile Format). -# If you do not define any access logfiles within a -# container, they will be logged here. Contrariwise, if you *do* -# define per- access logfiles, transactions will be -# logged therein and *not* in this file. -# -CustomLog /var/log/apache/access_log common - -# -# If you would like to have agent and referer logfiles, uncomment the -# following directives. -# -#CustomLog /var/log/apache/referer_log referer -#CustomLog /var/log/apache/agent_log agent - -# -# If you prefer a single logfile with access, agent, and referer information -# (Combined Logfile Format) you can use the following directive. -# -#CustomLog /var/log/apache/access_log combined - -# -# Optionally add a line containing the server version and virtual host -# name to server-generated pages (error documents, FTP directory listings, -# mod_status and mod_info output etc., but not CGI generated documents). -# Set to "EMail" to also include a mailto: link to the ServerAdmin. -# Set to one of: On | Off | EMail -# -ServerSignature Off - -# EBCDIC configuration: -# (only for mainframes using the EBCDIC codeset, currently one of: -# Fujitsu-Siemens' BS2000/OSD, IBM's OS/390 and IBM's TPF)!! -# The following default configuration assumes that "text files" -# are stored in EBCDIC (so that you can operate on them using the -# normal POSIX tools like grep and sort) while "binary files" are -# stored with identical octets as on an ASCII machine. -# -# The directives are evaluated in configuration file order, with -# the EBCDICConvert directives applied before EBCDICConvertByType. -# -# If you want to have ASCII HTML documents and EBCDIC HTML documents -# at the same time, you can use the file extension to force -# conversion off for the ASCII documents: -# > AddType text/html .ahtml -# > EBCDICConvert Off=InOut .ahtml -# -# EBCDICConvertByType On=InOut text/* message/* multipart/* -# EBCDICConvertByType On=In application/x-www-form-urlencoded -# EBCDICConvertByType On=InOut application/postscript model/vrml -# EBCDICConvertByType Off=InOut */* - - -# -# Aliases: Add here as many aliases as you need (with no limit). The format is -# Alias fakename realname -# - - - # - # Note that if you include a trailing / on fakename then the server will - # require it to be present in the URL. So "/icons" isn't aliased in this - # example, only "/icons/". If the fakename is slash-terminated, then the - # realname must also be slash terminated, and if the fakename omits the - # trailing slash, the realname must also omit it. - # - Alias /icons/ "/var/www/icons/" - - - Options Indexes MultiViews - AllowOverride None - Order allow,deny - Allow from all - - - # This Alias will project the on-line documentation tree under /manual/ - # even if you change the DocumentRoot. Comment it if you don't want to - # provide access to the on-line documentation. - # - Alias /manual/ "/var/www/htdocs/manual/" - - - Options Indexes FollowSymlinks MultiViews - AllowOverride None - Order allow,deny - Allow from all - - - # - # ScriptAlias: This controls which directories contain server scripts. - # ScriptAliases are essentially the same as Aliases, except that - # documents in the realname directory are treated as applications and - # run by the server when requested rather than as documents sent to the client. - # The same rules about trailing "/" apply to ScriptAlias directives as to - # Alias. - # - ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" - - # - # "/var/www/cgi-bin" should be changed to whatever your ScriptAliased - # CGI directory exists, if you have that configured. - # - - AllowOverride None - Options None - Order allow,deny - Allow from all - - - -# End of aliases. - -# -# Redirect allows you to tell clients about documents which used to exist in -# your server's namespace, but do not anymore. This allows you to tell the -# clients where to look for the relocated document. -# Format: Redirect old-URI new-URL -# - -# -# Directives controlling the display of server-generated directory listings. -# - - - # - # FancyIndexing is whether you want fancy directory indexing or standard - # - IndexOptions FancyIndexing - - # - # AddIcon* directives tell the server which icon to show for different - # files or filename extensions. These are only displayed for - # FancyIndexed directories. - # - AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip - - AddIconByType (TXT,/icons/text.gif) text/* - AddIconByType (IMG,/icons/image2.gif) image/* - AddIconByType (SND,/icons/sound2.gif) audio/* - AddIconByType (VID,/icons/movie.gif) video/* - - AddIcon /icons/binary.gif .bin .exe - AddIcon /icons/binhex.gif .hqx - AddIcon /icons/tar.gif .tar - AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv - AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip - AddIcon /icons/a.gif .ps .ai .eps - AddIcon /icons/layout.gif .html .shtml .htm .pdf - AddIcon /icons/text.gif .txt - AddIcon /icons/c.gif .c - AddIcon /icons/p.gif .pl .py - AddIcon /icons/f.gif .for - AddIcon /icons/dvi.gif .dvi - AddIcon /icons/uuencoded.gif .uu - AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl - AddIcon /icons/tex.gif .tex - AddIcon /icons/bomb.gif core - - AddIcon /icons/back.gif .. - AddIcon /icons/hand.right.gif README - AddIcon /icons/folder.gif ^^DIRECTORY^^ - AddIcon /icons/blank.gif ^^BLANKICON^^ - - # - # DefaultIcon is which icon to show for files which do not have an icon - # explicitly set. - # - DefaultIcon /icons/unknown.gif - - # - # AddDescription allows you to place a short description after a file in - # server-generated indexes. These are only displayed for FancyIndexed - # directories. - # Format: AddDescription "description" filename - # - #AddDescription "GZIP compressed document" .gz - #AddDescription "tar archive" .tar - #AddDescription "GZIP compressed tar archive" .tgz - - # - # ReadmeName is the name of the README file the server will look for by - # default, and append to directory listings. - # - # HeaderName is the name of a file which should be prepended to - # directory indexes. - # - ReadmeName README.html - HeaderName HEADER.html - - # - # IndexIgnore is a set of filenames which directory indexing should ignore - # and not include in the listing. Shell-style wildcarding is permitted. - # - IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t - - -# End of indexing directives. - -# -# Document types. -# - - - # - # AddLanguage allows you to specify the language of a document. You can - # then use content negotiation to give a browser a file in a language - # it can understand. - # - # Note 1: The suffix does not have to be the same as the language - # keyword --- those with documents in Polish (whose net-standard - # language code is pl) may wish to use "AddLanguage pl .po" to - # avoid the ambiguity with the common suffix for perl scripts. - # - # Note 2: The example entries below illustrate that in quite - # some cases the two character 'Language' abbreviation is not - # identical to the two character 'Country' code for its country, - # E.g. 'Danmark/dk' versus 'Danish/da'. - # - # Note 3: In the case of 'ltz' we violate the RFC by using a three char - # specifier. But there is 'work in progress' to fix this and get - # the reference data for rfc1766 cleaned up. - # - # Danish (da) - Dutch (nl) - English (en) - Estonian (ee) - # French (fr) - German (de) - Greek-Modern (el) - # Italian (it) - Korean (kr) - Norwegian (no) - Norwegian Nynorsk (nn) - # Portugese (pt) - Luxembourgeois* (ltz) - # Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cs) - # Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) - # Russian (ru) - # - AddLanguage da .dk - AddLanguage nl .nl - AddLanguage en .en - AddLanguage et .ee - AddLanguage fr .fr - AddLanguage de .de - AddLanguage el .el - AddLanguage he .he - AddCharset ISO-8859-8 .iso8859-8 - AddLanguage it .it - AddLanguage ja .ja - AddCharset ISO-2022-JP .jis - AddLanguage kr .kr - AddCharset ISO-2022-KR .iso-kr - AddLanguage nn .nn - AddLanguage no .no - AddLanguage pl .po - AddCharset ISO-8859-2 .iso-pl - AddLanguage pt .pt - AddLanguage pt-br .pt-br - AddLanguage ltz .lu - AddLanguage ca .ca - AddLanguage es .es - AddLanguage sv .sv - AddLanguage cs .cz .cs - AddLanguage ru .ru - AddLanguage zh-TW .zh-tw - AddCharset Big5 .Big5 .big5 - AddCharset WINDOWS-1251 .cp-1251 - AddCharset CP866 .cp866 - AddCharset ISO-8859-5 .iso-ru - AddCharset KOI8-R .koi8-r - AddCharset UCS-2 .ucs2 - AddCharset UCS-4 .ucs4 - AddCharset UTF-8 .utf8 - - # LanguagePriority allows you to give precedence to some languages - # in case of a tie during content negotiation. - # - # Just list the languages in decreasing order of preference. We have - # more or less alphabetized them here. You probably want to change this. - # - - LanguagePriority en da nl et fr de el it ja kr no pl pt pt-br ru ltz ca es sv tw - - - # - # AddType allows you to tweak mime.types without actually editing it, or to - # make certain files to be certain types. - # - AddType application/x-tar .tgz - - # - # AddEncoding allows you to have certain browsers uncompress - # information on the fly. Note: Not all browsers support this. - # Despite the name similarity, the following Add* directives have nothing - # to do with the FancyIndexing customization directives above. - # - AddEncoding x-compress .Z - AddEncoding x-gzip .gz .tgz - # - # If the AddEncoding directives above are commented-out, then you - # probably should define those extensions to indicate media types: - # - #AddType application/x-compress .Z - #AddType application/x-gzip .gz .tgz - - # - # AddHandler allows you to map certain file extensions to "handlers", - # actions unrelated to filetype. These can be either built into the server - # or added with the Action command (see below) - # - # If you want to use server side includes, or CGI outside - # ScriptAliased directories, uncomment the following lines. - # - # To use CGI scripts: - # - #AddHandler cgi-script .cgi - - # - # To use server-parsed HTML files - # - #AddType text/html .shtml - #AddHandler server-parsed .shtml - - # - # Uncomment the following line to enable Apache's send-asis HTTP file - # feature - # - #AddHandler send-as-is asis - - # - # If you wish to use server-parsed imagemap files, use - # - #AddHandler imap-file map - - # - # To enable type maps, you might want to use - # - #AddHandler type-map var - - -# End of document types. - -# -# Action lets you define media types that will execute a script whenever -# a matching file is called. This eliminates the need for repeated URL -# pathnames for oft-used CGI file processors. -# Format: Action media/type /cgi-script/location -# Format: Action handler-name /cgi-script/location -# - -# -# MetaDir: specifies the name of the directory in which Apache can find -# meta information files. These files contain additional HTTP headers -# to include when sending the document -# -#MetaDir .web - -# -# MetaSuffix: specifies the file name suffix for the file containing the -# meta information. -# -#MetaSuffix .meta - -# -# Customizable error response (Apache style) -# these come in three flavors -# -# 1) plain text -ErrorDocument 500 /missing.html -# n.b. the single leading (") marks it as text, it does not get output -# -# 2) local redirects -ErrorDocument 404 /missing.html -# to redirect to local URL /missing.html -#ErrorDocument 404 /cgi-bin/missing_handler.pl -# N.B.: You can redirect to a script or a document using server-side-includes. -# -# 3) external redirects -ErrorDocument 402 /missing.html -# N.B.: Many of the environment variables associated with the original -# request will *not* be available to such a script. - -# -# Customize behaviour based on the browser -# - - - # - # The following directives modify normal HTTP response behavior. - # The first directive disables keepalive for Netscape 2.x and browsers that - # spoof it. There are known problems with these browser implementations. - # The second directive is for Microsoft Internet Explorer 4.0b2 - # which has a broken HTTP/1.1 implementation and does not properly - # support keepalive when it is used on 301 or 302 (redirect) responses. - # - BrowserMatch "Mozilla/2" nokeepalive - BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 - - # - # The following directive disables HTTP/1.1 responses to browsers which - # are in violation of the HTTP/1.0 spec by not being able to grok a - # basic 1.1 response. - # - BrowserMatch "RealPlayer 4\.0" force-response-1.0 - BrowserMatch "Java/1\.0" force-response-1.0 - BrowserMatch "JDK/1\.0" force-response-1.0 - - -# End of browser customization directives - -# -# Allow server status reports, with the URL of http://servername/server-status -# Change the ".example.com" to match your domain to enable. -# -# -# SetHandler server-status -# Order deny,allow -# Deny from all -# Allow from .example.com -# - -# -# Allow remote server configuration reports, with the URL of -# http://servername/server-info (requires that mod_info.c be loaded). -# Change the ".example.com" to match your domain to enable. -# -# -# SetHandler server-info -# Order deny,allow -# Deny from all -# Allow from .example.com -# - -# -# There have been reports of people trying to abuse an old bug from pre-1.1 -# days. This bug involved a CGI script distributed as a part of Apache. -# By uncommenting these lines you can redirect these attacks to a logging -# script on phf.apache.org. Or, you can record them yourself, using the script -# support/phf_abuse_log.cgi. -# -# -# Deny from all -# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi -# - -### Section 3: Virtual Hosts -# -# VirtualHost: If you want to maintain multiple domains/hostnames on your -# machine you can setup VirtualHost containers for them. Most configurations -# use only name-based virtual hosts so the server doesn't need to worry about -# IP addresses. This is indicated by the asterisks in the directives below. -# -# Please see the documentation at -# for further details before you try to setup virtual hosts. -# -# You may use the command line option '-S' to verify your virtual host -# configuration. - -# -# Use name-based virtual hosting. -# -#NameVirtualHost *:80 - -# -# VirtualHost example: -# Almost any Apache directive may go into a VirtualHost container. -# The first VirtualHost section is used for requests without a known -# server name. -# -# -# ServerAdmin webmaster@dummy-host.example.com -# DocumentRoot /www/docs/dummy-host.example.com -# ServerName dummy-host.example.com -# ErrorLog logs/dummy-host.example.com-error_log -# CustomLog logs/dummy-host.example.com-access_log common -# - -# By default, all external Apache modules are disabled. To enable a particular -# module for Apache, make sure the necessary packages are installed. Then -# uncomment the appropriate Include line below, save the file, and restart -# Apache. Note that some modules may need additional configuration steps. For -# example, mod_ssl requires a site certificate which you may need to generate. -# -# Lastly, if you remove a module package, be sure to edit this file and comment -# out the appropriate Include line. - -# ==> mod_php configuration settings <== -# -# PACKAGES REQUIRED: openssl-solibs (A series) and/or openssl (N series), -# mysql (AP series), gmp (L series), mhash (L series), -# and apache (N series) -# -#Include /etc/apache/mod_php.conf - -# ==> mod_ssl configuration settings <== -# -# PACKAGES REQUIRED: apache (N series) and openssl (N series) -# -#Include /etc/apache/mod_ssl.conf - -#NameVirtualHost VSERVER_IP - -Include /etc/apache/vhosts diff --git a/tags/0.6/templates/vserver/files/etc/apache/php.ini b/tags/0.6/templates/vserver/files/etc/apache/php.ini deleted file mode 100644 index e6cddef..0000000 --- a/tags/0.6/templates/vserver/files/etc/apache/php.ini +++ /dev/null @@ -1,1122 +0,0 @@ -[PHP] - -;;;;;;;;;;;;;;;;;;; -; About this file ; -;;;;;;;;;;;;;;;;;;; -; -; This is the recommended, PHP 4-style version of the php.ini-dist file. It -; sets some non standard settings, that make PHP more efficient, more secure, -; and encourage cleaner coding. -; The price is that with these settings, PHP may be incompatible with some -; applications, and sometimes, more difficult to develop with. Using this -; file is warmly recommended for production sites. As all of the changes from -; the standard settings are thoroughly documented, you can go over each one, -; and decide whether you want to use it or not. -; -; For general information about the php.ini file, please consult the php.ini-dist -; file, included in your PHP distribution. -; -; This file is different from the php.ini-dist file in the fact that it features -; different values for several directives, in order to improve performance, while -; possibly breaking compatibility with the standard out-of-the-box behavior of -; PHP 3. Please make sure you read what's different, and modify your scripts -; accordingly, if you decide to use this file instead. -; -; - register_globals = Off [Security, Performance] -; Global variables are no longer registered for input data (POST, GET, cookies, -; environment and other server variables). Instead of using $foo, you must use -; you can use $_REQUEST["foo"] (includes any variable that arrives through the -; request, namely, POST, GET and cookie variables), or use one of the specific -; $_GET["foo"], $_POST["foo"], $_COOKIE["foo"] or $_FILES["foo"], depending -; on where the input originates. Also, you can look at the -; import_request_variables() function. -; Note that register_globals is going to be depracated (i.e., turned off by -; default) in the next version of PHP, because it often leads to security bugs. -; Read http://php.net/manual/en/security.registerglobals.php for further -; information. -; - display_errors = Off [Security] -; With this directive set to off, errors that occur during the execution of -; scripts will no longer be displayed as a part of the script output, and thus, -; will no longer be exposed to remote users. With some errors, the error message -; content may expose information about your script, web server, or database -; server that may be exploitable for hacking. Production sites should have this -; directive set to off. -; - log_errors = On [Security] -; This directive complements the above one. Any errors that occur during the -; execution of your script will be logged (typically, to your server's error log, -; but can be configured in several ways). Along with setting display_errors to off, -; this setup gives you the ability to fully understand what may have gone wrong, -; without exposing any sensitive information to remote users. -; - output_buffering = 4096 [Performance] -; Set a 4KB output buffer. Enabling output buffering typically results in less -; writes, and sometimes less packets sent on the wire, which can often lead to -; better performance. The gain this directive actually yields greatly depends -; on which Web server you're working with, and what kind of scripts you're using. -; - register_argc_argv = Off [Performance] -; Disables registration of the somewhat redundant $argv and $argc global -; variables. -; - magic_quotes_gpc = Off [Performance] -; Input data is no longer escaped with slashes so that it can be sent into -; SQL databases without further manipulation. Instead, you should use the -; function addslashes() on each input element you wish to send to a database. -; - variables_order = "GPCS" [Performance] -; The environment variables are not hashed into the $HTTP_ENV_VARS[]. To access -; environment variables, you can use getenv() instead. -; - error_reporting = E_ALL [Code Cleanliness, Security(?)] -; By default, PHP surpresses errors of type E_NOTICE. These error messages -; are emitted for non-critical errors, but that could be a symptom of a bigger -; problem. Most notably, this will cause error messages about the use -; of uninitialized variables to be displayed. -; - allow_call_time_pass_reference = Off [Code cleanliness] -; It's not possible to decide to force a variable to be passed by reference -; when calling a function. The PHP 4 style to do this is by making the -; function require the relevant argument by reference. - - -;;;;;;;;;;;;;;;;;;;; -; Language Options ; -;;;;;;;;;;;;;;;;;;;; - -; Enable the PHP scripting language engine under Apache. -engine = On - -; Allow the tags are recognized. -; NOTE: Using short tags should be avoided when developing applications or -; libraries that are meant for redistribution, or deployment on PHP -; servers which are not under your control, because short tags may not -; be supported on the target server. For portable, redistributable code, -; be sure not to use short tags. -short_open_tag = On - -; Allow ASP-style <% %> tags. -asp_tags = Off - -; The number of significant digits displayed in floating point numbers. -precision = 14 - -; Enforce year 2000 compliance (will cause problems with non-compliant browsers) -y2k_compliance = On - -; Output buffering allows you to send header lines (including cookies) even -; after you send body content, at the price of slowing PHP's output layer a -; bit. You can enable output buffering during runtime by calling the output -; buffering functions. You can also enable output buffering for all files by -; setting this directive to On. If you wish to limit the size of the buffer -; to a certain size - you can use a maximum number of bytes instead of 'On', as -; a value for this directive (e.g., output_buffering=4096). -output_buffering = 4096 - -; You can redirect all of the output of your scripts to a function. For -; example, if you set output_handler to "mb_output_handler", character -; encoding will be transparently converted to the specified encoding. -; Setting any output handler automatically turns on output buffering. -; Note: People who wrote portable scripts should not depend on this ini -; directive. Instead, explicitly set the output handler using ob_start(). -; Using this ini directive may cause problems unless you know what script -; is doing. -; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler" -; and you cannot use both "ob_gzhandler" and "zlib.output_compression". -;output_handler = - -; Transparent output compression using the zlib library -; Valid values for this option are 'off', 'on', or a specific buffer size -; to be used for compression (default is 4KB) -; Note: Resulting chunk size may vary due to nature of compression. PHP -; outputs chunks that are few handreds bytes each as a result of compression. -; If you want larger chunk size for better performence, enable output_buffering -; also. -; Note: output_handler must be empty if this is set 'On' !!!! -; Instead you must use zlib.output_handler. -zlib.output_compression = Off - -; You cannot specify additional output handlers if zlib.output_compression -; is activated here. This setting does the same as output_handler but in -; a different order. -;zlib.output_handler = - -; Implicit flush tells PHP to tell the output layer to flush itself -; automatically after every output block. This is equivalent to calling the -; PHP function flush() after each and every call to print() or echo() and each -; and every HTML block. Turning this option on has serious performance -; implications and is generally recommended for debugging purposes only. -implicit_flush = Off - -; The unserialize callback function will be called (with the undefined class' -; name as parameter), if the unserializer finds an undefined class -; which should be instanciated. -; A warning appears if the specified function is not defined, or if the -; function doesn't include/implement the missing class. -; So only set this entry, if you really want to implement such a -; callback-function. -unserialize_callback_func= - -; When floats & doubles are serialized store serialize_precision significant -; digits after the floating point. The default value ensures that when floats -; are decoded with unserialize, the data will remain the same. -serialize_precision = 100 - -; Whether to enable the ability to force arguments to be passed by reference -; at function call time. This method is deprecated and is likely to be -; unsupported in future versions of PHP/Zend. The encouraged method of -; specifying which arguments should be passed by reference is in the function -; declaration. You're encouraged to try and turn this option Off and make -; sure your scripts work properly with it in order to ensure they will work -; with future versions of the language (you will receive a warning each time -; you use this feature, and the argument will be passed by value instead of by -; reference). -allow_call_time_pass_reference = Off - -; -; Safe Mode -; -safe_mode = Off - -; By default, Safe Mode does a UID compare check when -; opening files. If you want to relax this to a GID compare, -; then turn on safe_mode_gid. -safe_mode_gid = Off - -; When safe_mode is on, UID/GID checks are bypassed when -; including files from this directory and its subdirectories. -; (directory must also be in include_path or full path must -; be used when including) -safe_mode_include_dir = - -; When safe_mode is on, only executables located in the safe_mode_exec_dir -; will be allowed to be executed via the exec family of functions. -safe_mode_exec_dir = - -; Setting certain environment variables may be a potential security breach. -; This directive contains a comma-delimited list of prefixes. In Safe Mode, -; the user may only alter environment variables whose names begin with the -; prefixes supplied here. By default, users will only be able to set -; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR). -; -; Note: If this directive is empty, PHP will let the user modify ANY -; environment variable! -safe_mode_allowed_env_vars = PHP_ - -; This directive contains a comma-delimited list of environment variables that -; the end user won't be able to change using putenv(). These variables will be -; protected even if safe_mode_allowed_env_vars is set to allow to change them. -safe_mode_protected_env_vars = LD_LIBRARY_PATH - -; open_basedir, if set, limits all file operations to the defined directory -; and below. This directive makes most sense if used in a per-directory -; or per-virtualhost web server configuration file. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -;open_basedir = - -; This directive allows you to disable certain functions for security reasons. -; It receives a comma-delimited list of function names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -disable_functions = - -; This directive allows you to disable certain classes for security reasons. -; It receives a comma-delimited list of class names. This directive is -; *NOT* affected by whether Safe Mode is turned On or Off. -disable_classes = - -; Colors for Syntax Highlighting mode. Anything that's acceptable in -; would work. -;highlight.string = #DD0000 -;highlight.comment = #FF9900 -;highlight.keyword = #007700 -;highlight.bg = #FFFFFF -;highlight.default = #0000BB -;highlight.html = #000000 - - -; -; Misc -; -; Decides whether PHP may expose the fact that it is installed on the server -; (e.g. by adding its signature to the Web server header). It is no security -; threat in any way, but it makes it possible to determine whether you use PHP -; on your server or not. -expose_php = On - - -;;;;;;;;;;;;;;;;;;; -; Resource Limits ; -;;;;;;;;;;;;;;;;;;; - -max_execution_time = 30 ; Maximum execution time of each script, in seconds -max_input_time = 60 ; Maximum amount of time each script may spend parsing request data -memory_limit = 8M ; Maximum amount of memory a script may consume (8MB) - - -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -; Error handling and logging ; -;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; - -; error_reporting is a bit-field. Or each number up to get desired error -; reporting level -; E_ALL - All errors and warnings -; E_ERROR - fatal run-time errors -; E_WARNING - run-time warnings (non-fatal errors) -; E_PARSE - compile-time parse errors -; E_NOTICE - run-time notices (these are warnings which often result -; from a bug in your code, but it's possible that it was -; intentional (e.g., using an uninitialized variable and -; relying on the fact it's automatically initialized to an -; empty string) -; E_CORE_ERROR - fatal errors that occur during PHP's initial startup -; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's -; initial startup -; E_COMPILE_ERROR - fatal compile-time errors -; E_COMPILE_WARNING - compile-time warnings (non-fatal errors) -; E_USER_ERROR - user-generated error message -; E_USER_WARNING - user-generated warning message -; E_USER_NOTICE - user-generated notice message -; -; Examples: -; -; - Show all errors, except for notices -; -;error_reporting = E_ALL & ~E_NOTICE -; -; - Show only errors -; -;error_reporting = E_COMPILE_ERROR|E_ERROR|E_CORE_ERROR -; -; - Show all errors -; -error_reporting = E_ALL - -; Print out errors (as a part of the output). For production web sites, -; you're strongly encouraged to turn this feature off, and use error logging -; instead (see below). Keeping display_errors enabled on a production web site -; may reveal security information to end users, such as file paths on your Web -; server, your database schema or other information. -display_errors = Off - -; Even when display_errors is on, errors that occur during PHP's startup -; sequence are not displayed. It's strongly recommended to keep -; display_startup_errors off, except for when debugging. -display_startup_errors = Off - -; Log errors into a log file (server-specific log, stderr, or error_log (below)) -; As stated above, you're strongly advised to use error logging in place of -; error displaying on production web sites. -log_errors = On - -; Set maximum length of log_errors. In error_log information about the source is -; added. The default is 1024 and 0 allows to not apply any maximum length at all. -log_errors_max_len = 1024 - -; Do not log repeated messages. Repeated errors must occur in same file on same -; line until ignore_repeated_source is set true. -ignore_repeated_errors = Off - -; Ignore source of message when ignoring repeated messages. When this setting -; is On you will not log errors with repeated messages from different files or -; sourcelines. -ignore_repeated_source = Off - -; If this parameter is set to Off, then memory leaks will not be shown (on -; stdout or in the log). This has only effect in a debug compile, and if -; error reporting includes E_WARNING in the allowed list -report_memleaks = On - -; Store the last error/warning message in $php_errormsg (boolean). -track_errors = Off - -; Disable the inclusion of HTML tags in error messages. -;html_errors = Off - -; If html_errors is set On PHP produces clickable error messages that direct -; to a page describing the error or function causing the error in detail. -; You can download a copy of the PHP manual from http://www.php.net/docs.php -; and change docref_root to the base URL of your local copy including the -; leading '/'. You must also specify the file extension being used including -; the dot. -;docref_root = "/phpmanual/" -;docref_ext = .html - -; String to output before an error message. -;error_prepend_string = "" - -; String to output after an error message. -;error_append_string = "" - -; Log errors to specified file. -;error_log = filename - -; Log errors to syslog (Event Log on NT, not valid in Windows 95). -;error_log = syslog - - -;;;;;;;;;;;;;;;;; -; Data Handling ; -;;;;;;;;;;;;;;;;; -; -; Note - track_vars is ALWAYS enabled as of PHP 4.0.3 - -; The separator used in PHP generated URLs to separate arguments. -; Default is "&". -;arg_separator.output = "&" - -; List of separator(s) used by PHP to parse input URLs into variables. -; Default is "&". -; NOTE: Every character in this directive is considered as separator! -;arg_separator.input = ";&" - -; This directive describes the order in which PHP registers GET, POST, Cookie, -; Environment and Built-in variables (G, P, C, E & S respectively, often -; referred to as EGPCS or GPC). Registration is done from left to right, newer -; values override older values. -variables_order = "GPCS" - -; Whether or not to register the EGPCS variables as global variables. You may -; want to turn this off if you don't want to clutter your scripts' global scope -; with user data. This makes most sense when coupled with track_vars - in which -; case you can access all of the GPC variables through the $HTTP_*_VARS[], -; variables. -; -; You should do your best to write your scripts so that they do not require -; register_globals to be on; Using form variables as globals can easily lead -; to possible security problems, if the code is not very well thought of. -register_globals = Off - -; This directive tells PHP whether to declare the argv&argc variables (that -; would contain the GET information). If you don't use these variables, you -; should turn it off for increased performance. -register_argc_argv = Off - -; Maximum size of POST data that PHP will accept. -post_max_size = 8M - -; This directive is deprecated. Use variables_order instead. -gpc_order = "GPC" - -; Magic quotes -; - -; Magic quotes for incoming GET/POST/Cookie data. -magic_quotes_gpc = Off - -; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc. -magic_quotes_runtime = Off - -; Use Sybase-style magic quotes (escape ' with '' instead of \'). -magic_quotes_sybase = Off - -; Automatically add files before or after any PHP document. -auto_prepend_file = -auto_append_file = - -; As of 4.0b4, PHP always outputs a character encoding by default in -; the Content-type: header. To disable sending of the charset, simply -; set it to be empty. -; -; PHP's built-in default is text/html -default_mimetype = "text/html" -;default_charset = "iso-8859-1" - -; Always populate the $HTTP_RAW_POST_DATA variable. -;always_populate_raw_post_data = On - - -;;;;;;;;;;;;;;;;;;;;;;;;; -; Paths and Directories ; -;;;;;;;;;;;;;;;;;;;;;;;;; - -; UNIX: "/path1:/path2" -;include_path = ".:/php/includes" -; -; Windows: "\path1;\path2" -;include_path = ".;c:\php\includes" - -; The root of the PHP pages, used only if nonempty. -; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root -; if you are running php as a CGI under any web server (other than IIS) -; see documentation for security issues. The alternate is to use the -; cgi.force_redirect configuration below -doc_root = - -; The directory under which PHP opens the script using /~usernamem used only -; if nonempty. -user_dir = - -; Directory in which the loadable extensions (modules) reside. -; extension_dir = "./" -extension_dir = "/usr/lib/php/extensions/" - -; Whether or not to enable the dl() function. The dl() function does NOT work -; properly in multithreaded servers, such as IIS or Zeus, and is automatically -; disabled on them. -enable_dl = On - -; cgi.force_redirect is necessary to provide security running PHP as a CGI under -; most web servers. Left undefined, PHP turns this on by default. You can -; turn it off here AT YOUR OWN RISK -; **You CAN safely turn this off for IIS, in fact, you MUST.** -; cgi.force_redirect = 1 - -; if cgi.nph is enabled it will force cgi to always sent Status: 200 with -; every request. -; cgi.nph = 1 - -; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape -; (iPlanet) web servers, you MAY need to set an environment variable name that PHP -; will look for to know it is OK to continue execution. Setting this variable MAY -; cause security issues, KNOW WHAT YOU ARE DOING FIRST. -; cgi.redirect_status_env = ; - -; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's -; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok -; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting -; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting -; of zero causes PHP to behave as before. Default is zero. You should fix your scripts -; to use SCRIPT_FILENAME rather than PATH_TRANSLATED. -; cgi.fix_pathinfo=1 - -; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate -; security tokens of the calling client. This allows IIS to define the -; security context that the request runs under. mod_fastcgi under Apache -; does not currently support this feature (03/17/2002) -; Set to 1 if running under IIS. Default is zero. -; fastcgi.impersonate = 1; - -; Disable logging through FastCGI connection -; fastcgi.log = 0 - -; cgi.rfc2616_headers configuration option tells PHP what type of headers to -; use when sending HTTP response code. If it's set 0 PHP sends Status: header that -; is supported by Apache. When this option is set to 1 PHP will send -; RFC2616 compliant header. -; Default is zero. -;cgi.rfc2616_headers = 0 - - -;;;;;;;;;;;;;;;; -; File Uploads ; -;;;;;;;;;;;;;;;; - -; Whether to allow HTTP file uploads. -file_uploads = On - -; Temporary directory for HTTP uploaded files (will use system default if not -; specified). -;upload_tmp_dir = - -; Maximum allowed size for uploaded files. -upload_max_filesize = 10M - - -;;;;;;;;;;;;;;;;;; -; Fopen wrappers ; -;;;;;;;;;;;;;;;;;; - -; Whether to allow the treatment of URLs (like http:// or ftp://) as files. -allow_url_fopen = On - -; Define the anonymous ftp password (your email address) -;from="john@doe.com" - -; Define the user agent for php to send -;user_agent="PHP" - -; Default timeout for socket based streams (seconds) -default_socket_timeout = 60 - -; If your scripts have to deal with files from Macintosh systems, -; or you are running on a Mac and need to deal with files from -; unix or win32 systems, setting this flag will cause PHP to -; automatically detect the EOL character in those files so that -; fgets() and file() will work regardless of the source of the file. -; auto_detect_line_endings = Off - - -;;;;;;;;;;;;;;;;;;;;;; -; Dynamic Extensions ; -;;;;;;;;;;;;;;;;;;;;;; -; -; If you wish to have an extension loaded automatically, use the following -; syntax: -; -; extension=modulename.extension -; -; For example, on Windows: -; -; extension=msql.dll -; -; ... or under UNIX: -; -; extension=msql.so -; -; Note that it should be the name of the module only; no directory information -; needs to go here. Specify the location of the extension with the -; extension_dir directive above. -; -; Load the MySQL module by default. Comment this out if you don't use MySQL. -extension=mysql.so - -; Load the gettext extension by default. Comment this out if you don't have the -; gettext shared library installed. -extension=gettext.so - -;Windows Extensions -;Note that MySQL and ODBC support is now built in, so no dll is needed for it. -; -;extension=php_mbstring.dll -;extension=php_bz2.dll -;extension=php_cpdf.dll -;extension=php_crack.dll -;extension=php_curl.dll -;extension=php_db.dll -;extension=php_dba.dll -;extension=php_dbase.dll -;extension=php_dbx.dll -;extension=php_domxml.dll -;extension=php_exif.dll -;extension=php_fdf.dll -;extension=php_filepro.dll -;extension=php_gd2.dll -;extension=php_gettext.dll -;extension=php_hyperwave.dll -;extension=php_iconv.dll -;extension=php_ifx.dll -;extension=php_iisfunc.dll -;extension=php_imap.dll -;extension=php_interbase.dll -;extension=php_java.dll -;extension=php_ldap.dll -;extension=php_mcrypt.dll -;extension=php_mhash.dll -;extension=php_mime_magic.dll -;extension=php_ming.dll -;extension=php_mssql.dll -;extension=php_msql.dll -;extension=php_oci8.dll -;extension=php_openssl.dll -;extension=php_oracle.dll -;extension=php_pdf.dll -;extension=php_pgsql.dll -;extension=php_printer.dll -;extension=php_shmop.dll -;extension=php_snmp.dll -;extension=php_sockets.dll -;extension=php_sybase_ct.dll -;extension=php_w32api.dll -;extension=php_xmlrpc.dll -;extension=php_xslt.dll -;extension=php_yaz.dll -;extension=php_zip.dll - - -;;;;;;;;;;;;;;;;;;; -; Module Settings ; -;;;;;;;;;;;;;;;;;;; - -[Syslog] -; Whether or not to define the various syslog variables (e.g. $LOG_PID, -; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In -; runtime, you can define these variables by calling define_syslog_variables(). -define_syslog_variables = Off - -[mail function] -; For Win32 only. -SMTP = localhost -smtp_port = 25 - -; For Win32 only. -;sendmail_from = me@example.com - -; For Unix only. You may supply arguments as well (default: "sendmail -t -i"). -;sendmail_path = - -[Java] -;java.class.path = .\php_java.jar -;java.home = c:\jdk -;java.library = c:\jdk\jre\bin\hotspot\jvm.dll -;java.library.path = .\ - -[SQL] -sql.safe_mode = Off - -[ODBC] -;odbc.default_db = Not yet implemented -;odbc.default_user = Not yet implemented -;odbc.default_pw = Not yet implemented - -; Allow or prevent persistent links. -odbc.allow_persistent = On - -; Check that a connection is still valid before reuse. -odbc.check_persistent = On - -; Maximum number of persistent links. -1 means no limit. -odbc.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -odbc.max_links = -1 - -; Handling of LONG fields. Returns number of bytes to variables. 0 means -; passthru. -odbc.defaultlrl = 4096 - -; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char. -; See the documentation on odbc_binmode and odbc_longreadlen for an explanation -; of uodbc.defaultlrl and uodbc.defaultbinmode -odbc.defaultbinmode = 1 - -[MySQL] -; Allow or prevent persistent links. -mysql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mysql.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -mysql.max_links = -1 - -; Default port number for mysql_connect(). If unset, mysql_connect() will use -; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the -; compile-time value defined MYSQL_PORT (in that order). Win32 will only look -; at MYSQL_PORT. -mysql.default_port = - -; Default socket name for local MySQL connects. If empty, uses the built-in -; MySQL defaults. -mysql.default_socket = - -; Default host for mysql_connect() (doesn't apply in safe mode). -mysql.default_host = - -; Default user for mysql_connect() (doesn't apply in safe mode). -mysql.default_user = - -; Default password for mysql_connect() (doesn't apply in safe mode). -; Note that this is generally a *bad* idea to store passwords in this file. -; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password") -; and reveal this password! And of course, any users with read access to this -; file will be able to reveal the password as well. -mysql.default_password = - -; Maximum time (in seconds) for connect timeout. -1 means no limit -mysql.connect_timeout = 60 - -; Trace mode. When trace_mode is active (=On), warnings for table/index scans and -; SQL-Errors will be displayed. -mysql.trace_mode = Off - -[mSQL] -; Allow or prevent persistent links. -msql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -msql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -msql.max_links = -1 - -[PostgresSQL] -; Allow or prevent persistent links. -pgsql.allow_persistent = On - -; Detect broken persistent links always with pg_pconnect(). -; Auto reset feature requires a little overheads. -pgsql.auto_reset_persistent = Off - -; Maximum number of persistent links. -1 means no limit. -pgsql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -pgsql.max_links = -1 - -; Ignore PostgreSQL backends Notice message or not. -; Notice message logging require a little overheads. -pgsql.ignore_notice = 0 - -; Log PostgreSQL backends Noitce message or not. -; Unless pgsql.ignore_notice=0, module cannot log notice message. -pgsql.log_notice = 0 - -[Sybase] -; Allow or prevent persistent links. -sybase.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -sybase.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -sybase.max_links = -1 - -;sybase.interface_file = "/usr/sybase/interfaces" - -; Minimum error severity to display. -sybase.min_error_severity = 10 - -; Minimum message severity to display. -sybase.min_message_severity = 10 - -; Compatability mode with old versions of PHP 3.0. -; If on, this will cause PHP to automatically assign types to results according -; to their Sybase type, instead of treating them all as strings. This -; compatibility mode will probably not stay around forever, so try applying -; whatever necessary changes to your code, and turn it off. -sybase.compatability_mode = Off - -[Sybase-CT] -; Allow or prevent persistent links. -sybct.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -sybct.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -sybct.max_links = -1 - -; Minimum server message severity to display. -sybct.min_server_severity = 10 - -; Minimum client message severity to display. -sybct.min_client_severity = 10 - -[dbx] -; returned column names can be converted for compatibility reasons -; possible values for dbx.colnames_case are -; "unchanged" (default, if not set) -; "lowercase" -; "uppercase" -; the recommended default is either upper- or lowercase, but -; unchanged is currently set for backwards compatibility -dbx.colnames_case = "lowercase" - -[bcmath] -; Number of decimal digits for all bcmath functions. -bcmath.scale = 0 - -[browscap] -;browscap = extra/browscap.ini - -[Informix] -; Default host for ifx_connect() (doesn't apply in safe mode). -ifx.default_host = - -; Default user for ifx_connect() (doesn't apply in safe mode). -ifx.default_user = - -; Default password for ifx_connect() (doesn't apply in safe mode). -ifx.default_password = - -; Allow or prevent persistent links. -ifx.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -ifx.max_persistent = -1 - -; Maximum number of links (persistent + non-persistent). -1 means no limit. -ifx.max_links = -1 - -; If on, select statements return the contents of a text blob instead of its id. -ifx.textasvarchar = 0 - -; If on, select statements return the contents of a byte blob instead of its id. -ifx.byteasvarchar = 0 - -; Trailing blanks are stripped from fixed-length char columns. May help the -; life of Informix SE users. -ifx.charasvarchar = 0 - -; If on, the contents of text and byte blobs are dumped to a file instead of -; keeping them in memory. -ifx.blobinfile = 0 - -; NULL's are returned as empty strings, unless this is set to 1. In that case, -; NULL's are returned as string 'NULL'. -ifx.nullformat = 0 - -[Session] -; Handler used to store/retrieve data. -session.save_handler = files - -; Argument passed to save_handler. In the case of files, this is the path -; where data files are stored. Note: Windows users have to change this -; variable in order to use PHP's session functions. -;session.save_path = /tmp - -; Whether to use cookies. -session.use_cookies = 1 - -; This option enables administrators to make their users invulnerable to -; attacks which involve passing session ids in URLs; defaults to 0. -; session.use_only_cookies = 1 - -; Name of the session (used as cookie name). -session.name = PHPSESSID - -; Initialize session on request startup. -session.auto_start = 0 - -; Lifetime in seconds of cookie or, if 0, until browser is restarted. -session.cookie_lifetime = 0 - -; The path for which the cookie is valid. -session.cookie_path = / - -; The domain for which the cookie is valid. -session.cookie_domain = - -; Handler used to serialize data. php is the standard serializer of PHP. -session.serialize_handler = php - -; Define the probability that the 'garbage collection' process is started -; on every session initialization. -; The probability is calculated by using gc_probability/gc_divisor, -; e.g. 1/100 means there is a 1% chance that the GC process starts -; on each request. - -session.gc_probability = 1 -session.gc_divisor = 1000 - -; After this number of seconds, stored data will be seen as 'garbage' and -; cleaned up by the garbage collection process. -session.gc_maxlifetime = 1440 - -; PHP 4.2 and less have an undocumented feature/bug that allows you to -; to initialize a session variable in the global scope, albeit register_globals -; is disabled. PHP 4.3 and later will warn you, if this feature is used. -; You can disable the feature and the warning separately. At this time, -; the warning is only displayed, if bug_compat_42 is enabled. - -session.bug_compat_42 = 0 -session.bug_compat_warn = 1 - -; Check HTTP Referer to invalidate externally stored URLs containing ids. -; HTTP_REFERER has to contain this substring for the session to be -; considered as valid. -session.referer_check = - -; How many bytes to read from the file. -session.entropy_length = 0 - -; Specified here to create the session id. -session.entropy_file = - -;session.entropy_length = 16 - -;session.entropy_file = /dev/urandom - -; Set to {nocache,private,public,} to determine HTTP caching aspects. -; or leave this empty to avoid sending anti-caching headers. -session.cache_limiter = nocache - -; Document expires after n minutes. -session.cache_expire = 180 - -; trans sid support is disabled by default. -; Use of trans sid may risk your users security. -; Use this option with caution. -; - User may send URL contains active session ID -; to other person via. email/irc/etc. -; - URL that contains active session ID may be stored -; in publically accessible computer. -; - User may access your site with the same session ID -; always using URL stored in browser's history or bookmarks. -session.use_trans_sid = 0 - -; The URL rewriter will look for URLs in a defined set of HTML tags. -; form/fieldset are special; if you include them here, the rewriter will -; add a hidden field with the info which is otherwise appended -; to URLs. If you want XHTML conformity, remove the form entry. -; Note that all valid entries require a "=", even if no value follows. -url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry" - -[MSSQL] -; Allow or prevent persistent links. -mssql.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -mssql.max_persistent = -1 - -; Maximum number of links (persistent+non persistent). -1 means no limit. -mssql.max_links = -1 - -; Minimum error severity to display. -mssql.min_error_severity = 10 - -; Minimum message severity to display. -mssql.min_message_severity = 10 - -; Compatability mode with old versions of PHP 3.0. -mssql.compatability_mode = Off - -; Connect timeout -;mssql.connect_timeout = 5 - -; Query timeout -;mssql.timeout = 60 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textlimit = 4096 - -; Valid range 0 - 2147483647. Default = 4096. -;mssql.textsize = 4096 - -; Limits the number of records in each batch. 0 = all records in one batch. -;mssql.batchsize = 0 - -; Specify how datetime and datetim4 columns are returned -; On => Returns data converted to SQL server settings -; Off => Returns values as YYYY-MM-DD hh:mm:ss -;mssql.datetimeconvert = On - -; Use NT authentication when connecting to the server -mssql.secure_connection = Off - -; Specify max number of processes. Default = 25 -;mssql.max_procs = 25 - -[Assertion] -; Assert(expr); active by default. -;assert.active = On - -; Issue a PHP warning for each failed assertion. -;assert.warning = On - -; Don't bail out by default. -;assert.bail = Off - -; User-function to be called if an assertion fails. -;assert.callback = 0 - -; Eval the expression with current error_reporting(). Set to true if you want -; error_reporting(0) around the eval(). -;assert.quiet_eval = 0 - -[Ingres II] -; Allow or prevent persistent links. -ingres.allow_persistent = On - -; Maximum number of persistent links. -1 means no limit. -ingres.max_persistent = -1 - -; Maximum number of links, including persistents. -1 means no limit. -ingres.max_links = -1 - -; Default database (format: [node_id::]dbname[/srv_class]). -ingres.default_database = - -; Default user. -ingres.default_user = - -; Default password. -ingres.default_password = - -[Verisign Payflow Pro] -; Default Payflow Pro server. -pfpro.defaulthost = "test-payflow.verisign.com" - -; Default port to connect to. -pfpro.defaultport = 443 - -; Default timeout in seconds. -pfpro.defaulttimeout = 30 - -; Default proxy IP address (if required). -;pfpro.proxyaddress = - -; Default proxy port. -;pfpro.proxyport = - -; Default proxy logon. -;pfpro.proxylogon = - -; Default proxy password. -;pfpro.proxypassword = - -[com] -; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs -;com.typelib_file = -; allow Distributed-COM calls -;com.allow_dcom = true -; autoregister constants of a components typlib on com_load() -;com.autoregister_typelib = true -; register constants casesensitive -;com.autoregister_casesensitive = false -; show warnings on duplicate constat registrations -;com.autoregister_verbose = true - -[Printer] -;printer.default_printer = "" - -[mbstring] -; language for internal character representation. -;mbstring.language = Japanese - -; internal/script encoding. -; Some encoding cannot work as internal encoding. -; (e.g. SJIS, BIG5, ISO-2022-*) -;mbstring.internal_encoding = EUC-JP - -; http input encoding. -;mbstring.http_input = auto - -; http output encoding. mb_output_handler must be -; registered as output buffer to function -;mbstring.http_output = SJIS - -; enable automatic encoding translation accoding to -; mbstring.internal_encoding setting. Input chars are -; converted to internal encoding by setting this to On. -; Note: Do _not_ use automatic encoding translation for -; portable libs/applications. -;mbstring.encoding_translation = Off - -; automatic encoding detection order. -; auto means -;mbstring.detect_order = auto - -; substitute_character used when character cannot be converted -; one from another -;mbstring.substitute_character = none; - -; overload(replace) single byte functions by mbstring functions. -; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(), -; etc. Possible values are 0,1,2,4 or combination of them. -; For example, 7 for overload everything. -; 0: No overload -; 1: Overload mail() function -; 2: Overload str*() functions -; 4: Overload ereg*() functions -;mbstring.func_overload = 0 - -[FrontBase] -;fbsql.allow_persistent = On -;fbsql.autocommit = On -;fbsql.default_database = -;fbsql.default_database_password = -;fbsql.default_host = -;fbsql.default_password = -;fbsql.default_user = "_SYSTEM" -;fbsql.generate_warnings = Off -;fbsql.max_connections = 128 -;fbsql.max_links = 128 -;fbsql.max_persistent = -1 -;fbsql.max_results = 128 -;fbsql.batchSize = 1000 - -[Crack] -; Modify the setting below to match the directory location of the cracklib -; dictionary files. Include the base filename, but not the file extension. -; crack.default_dictionary = "c:\php\lib\cracklib_dict" - -[exif] -; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS. -; With mbstring support this will automatically be converted into the encoding -; given by corresponding encode setting. When empty mbstring.internal_encoding -; is used. For the decode settings you can distinguish between motorola and -; intel byte order. A decode setting cannot be empty. -;exif.encode_unicode = ISO-8859-15 -;exif.decode_unicode_motorola = UCS-2BE -;exif.decode_unicode_intel = UCS-2LE -;exif.encode_jis = -;exif.decode_jis_motorola = JIS -;exif.decode_jis_intel = JIS - -; Local Variables: -; tab-width: 4 -; End: diff --git a/tags/0.6/templates/vserver/files/etc/apache/vhosts b/tags/0.6/templates/vserver/files/etc/apache/vhosts deleted file mode 100644 index e69de29..0000000 -- cgit v1.2.3