| Age | Commit message (Collapse) | Author |
|---|
|
|
|
* 2.x:
(#13974) Add predicate functions for interface facts
|
|
If one wishes to test if a host has a particular IP address (such as a floating
virtual address) or has an interface on a particular network (such as a
secondary management network), the facts that provide this information are
difficult to use within Puppet.
This patch addresses these needs by implementing functions
‘has_ip_address(value)’ and ‘has_ip_network(value)’. These functions look
through all interfaces for ipaddress_<interface> and network_<interface>
(respectively) having the requested <value>.
These functions are implemented on top of a lower-level predicate
function, ‘has_interface_with(kind, value)’, which iterates through the
interfaces in the ‘interfaces’ fact and checks the facts <kind>_<interface>
looking for <value>.
Additionally, the existence of a particular named interface can be checked for
by calling with only a single argument: has_interface_with(interface).
A Boolean is returned in all cases.
|
|
|
|
|
|
* 2.5.x:
(maint) Fix spec failures resulting from Facter API changes
|
|
This reverts commit 9e8c60a8b73fd96393b08d690c7197e62aae623e.
This was an error on my part. 3.1.x descends from 3.0.x _and_ 2.5.x, but 3.0.x does
not descend from 2.5.x. I should not have merged 2.5.x into 3.0.x,
instead I should have merged 2.5.x into 3.1.x skipping over the 3.0.x
merge up.
I'm slowly starting to understand the implications of semver on our
branching strategy... =)
|
|
This reverts commit c8c7afc7a00aaeeddea6514d9fe9508513e53a73, reversing
changes made to 03ec16e291a70ac5ac412be36ae3b86a771b98af.
This was a mistake on my part. 2.5 is a minor release and minor
releases should never be merged into patch level branches. 2.5.x should
have been merged into 3.1.x instead.
|
|
Without this patch stdlib tests fail against Facter 2.x and master but
not 1.6.x.
This patch fixes the problem by initializing the example group
differently depending on the version of Facter integrating into the
system. The adjusted methods are:
1.x - Facter.collection.loader.load
2.x - Facter.collection.load
The collection actually implements the load method in both version, it's
simply marked as private in 1.x.
|
|
* 2.5.x:
Update Modulefile, CHANGELOG for 2.5.0
Explicitly load functions used by ensure_resource
re-formatting
Add better docs about duplicate resource failures
Handle undef for parameter argument
Add function ensure_resource and defined_with_params
Revert "Revert "Merge branch 'haus-add_pe_facts_to_stdlib' into 2.4.x""
Revert "Merge branch 'haus-add_pe_facts_to_stdlib' into 2.4.x"
Prevent undefined method `split' for nil:NilClass with pe_foo_version facts
(maint) Clear all facts before each example
Add spec tests for pe_version facts
Add PE facts to stdlib
Conflicts:
CHANGELOG
Modulefile
spec/spec_helper.rb
|
|
This commit refactors to ensure 80 character lines.
|
|
This commit adds better handling of the case where
undef is passed as the parameter value.
This works by converting '' into []
|
|
This commit adds 2 new functions with unit tests.
defined_with_params works similarily to puppet's defined
function, except it allows you to also specify a hash of
params. defined_with_params will return true if a resource
also exists that matches the specified type/title (just like
with defined) as well as all of the specified params.
ensure_resource is a function that basically combines defined_with_params
with create_resources to conditionally create resources only if the
specified resource (title, type, params) does not already exist.
These functions are created to serve as an alternative to using
defined as follows:
if ! defined(Package['some_package']) {
package { 'some_package': ensure => present,
}
The issue with this usage is that there is no guarentee about
what parameters were set in the previous definition of the package
that made its way into the catalog.
ensure_resource could be used instead, as:
ensure_resource('package', 'some_package', { 'ensure' => 'present' })
This will creat the package resources only if another resource does
not exist with the specified parameters.
|
|
This reverts commit d6d23b495cda0e154b4e73982acc43e586564c0e.
This backwards-compatible additional functionality is targeted at the
next minor release. There are already backwards-incompatible changes in
the master branch so we need to establish a new minor branch.
|
|
This reverts commit 74e6411157b8df1af9a24c17971e3236f3096529, reversing
changes made to 417d219aa6e42f2a16af42c98aa063fc1d9d2ecd.
Here's why:
Actually... I just screwed this up.
I merged this new fact into 2.4.x but it's not fixing any bug. It's adding a
new fact, so this should go into master and we should release 2.5 since this is
new, backwards-compatible functionality.
|
|
Without this patch example groups must explicitly call `Facter.clear` to
clear any cached values between examples. This is a problem because
this behavior is not the concern of the example groups, the behavior is
the concern of the spec_helper or whatever facility we have in place to
initialize the system for testing.
This patch fixes the problem by duplicating the logic in the Facter
spec_helper to ensure facts are cleared out before each example.
This patch requires the example groups to explicitly load the facts they
require if the fact name does not match the filename.
|
|
This commit adds some basic spec tests for the pe_version facts. There are
basic postitive and negative cases.
|
|
* 2.4.x:
(Maint) Fix mis-use of rvalue functions as statements
Add .rspec file to repo root
|
|
* 2.3.x:
(Maint) Fix mis-use of rvalue functions as statements
Add .rspec file to repo root
|
|
* 2.2.x:
(Maint) Fix mis-use of rvalue functions as statements
Add .rspec file to repo root
|
|
* 2.1.x:
(Maint) Fix mis-use of rvalue functions as statements
Add .rspec file to repo root
Conflicts:
spec/unit/puppet/parser/functions/getvar_spec.rb
spec/unit/puppet/parser/functions/has_key_spec.rb
spec/unit/puppet/parser/functions/merge_spec.rb
|
|
Without this patch applied the spec tests are invalid because they call
rvalue functions as if they were statements. This is a problem because
Puppet 2.7.x currently throws an exception if a rvalue function is
invoked as if it were a statement function. This exception from Puppet
is causing tests to fail.
This patch fixes the problem by changing the tests to assign the return
value of the functions to a variable. This fixes the problem by
invoking the functions properly.
Paired-with: Andrew Parker <andy@puppetlabs.com>
|
|
This reverts commit 1e0983362464e8f2832239b09cdbc9175a51e6ec.
|
|
This reverts commit 42ddd7fe54f37b84e34b4a005de2249e53f07469, reversing
changes made to 53243605b28fc31618d079155c86b37b4e88a6ca.
|
|
Add function ensure_resource and defined_with_params
|
|
This commit adds a new parameter called "match"
to the file_line resource type, and support for
this new parameter to the corresponding ruby
provider.
This parameter is optional; file_line should work
just as before if you do not specify this parameter...
so this change should be backwards-compatible.
If you do specify the parameter, it is treated
as a regular expression that should be used when
looking through the file for a line. This allows
you to do things like find a line that begins with
a certain prefix (e.g., "foo=.*"), and *replace*
the existing line with the line you specify in your
"line" parameter. Without this capability, if you
already had a line "foo=bar" in your file and your
"line" parameter was set to "foo=baz", you'd end up
with *both* lines in the final file. In many cases
this is undesirable.
|
|
* 2.4.x:
(#15872) Add to_bytes function
|
|
Converts a string like "2 MB" to the value in bytes. Useful for
comparisons on facts that return a human readable number instead of
machine readable.
|
|
This commit refactors to ensure 80 character lines.
|
|
This commit adds better handling of the case where
undef is passed as the parameter value.
This works by converting '' into []
|
|
This commit adds 2 new functions with unit tests.
defined_with_params works similarily to puppet's defined
function, except it allows you to also specify a hash of
params. defined_with_params will return true if a resource
also exists that matches the specified type/title (just like
with defined) as well as all of the specified params.
ensure_resource is a function that basically combines defined_with_params
with create_resources to conditionally create resources only if the
specified resource (title, type, params) does not already exist.
These functions are created to serve as an alternative to using
defined as follows:
if ! defined(Package['some_package']) {
package { 'some_package': ensure => present,
}
The issue with this usage is that there is no guarentee about
what parameters were set in the previous definition of the package
that made its way into the catalog.
ensure_resource could be used instead, as:
ensure_resource('package', 'some_package', { 'ensure' => 'present' })
This will creat the package resources only if another resource does
not exist with the specified parameters.
|
|
* 2.4.x:
(Maint) use PuppetlabsSpec::PuppetInternals.scope (master)
Disable tests that fail on 2.6.x due to #15912
|
|
This patch is the same approach as the one that want into 2.3.x. It
covers the functions in master that do not exist in 2.3.x.
Without this patch all of the spec tests for parser functions in stdlib
would instantiate their own scope instances. This is a problem because
the standard library is tightly coupled with the internal behavior of
Puppet. Tight coupling like this creates failures when we change the
internal behavior of Puppet. This is exactly what happened recently
when we changed the method signature for the initializer of
Puppet::Parser::Scope instances.
This patch fixes the problem by creating scope instances using the
puppet labs spec helper. The specific method that provides scope
instances in Puppet-version-independent way is something like this:
let(:scope) { PuppetlabsSpec::PuppetInternals.scope }
This patch simply implements this across the board.
Paired-with: Andrew Parker <andy@puppetlabs.com>
|
|
* 2.3.x:
Disable tests that fail on 2.6.x due to #15912
|
|
* 2.2.x:
Disable tests that fail on 2.6.x due to #15912
|
|
In Puppet 2.6.x there is a bug where a function may be incorrectly detected as
an rvalue when it is not, or not detected when it is. This means that in tests
the correct syntax for calling a function will be rejected. This disables
those tests on 2.6.x, as there is no straightforward way to write them to be
compatible with both 2.6.x and newer versions of Puppet.
|
|
* 2.4.x:
Make sure functions are loaded for each test
Use rvalue functions correctly
(#2157) Make facts_dot_d compatible with external facts
Conflicts:
lib/facter/facter_dot_d.rb
|
|
* 2.3.x:
Make sure functions are loaded for each test
Use rvalue functions correctly
(Maint) Don't mock with mocha
(Maint) Fix up the get_module_path parser function
(Maint) use PuppetlabsSpec::PuppetSeams.parser_scope (2.3.x)
(Maint) Rename PuppetlabsSpec::Puppet{Seams,Internals}
(Maint) use PuppetlabsSpec::PuppetSeams.parser_scope
(Maint) Fix interpreter lines
Update CHANGELOG, Modulefile for 2.3.3
fix regression in #11017 properly
Fix spec tests using the new spec_helper
Update CHANGELOG for 2.3.2 release
Make file_line default to ensure => present
Memoize file_line spec instance variables
Fix spec tests using the new spec_helper
Revert "Merge remote-tracking branch 'eshamow/tickets/bug/13595_restrict_initialize_everything_for_tests' into 2.2.x"
(#13595) initialize_everything_for_tests couples modules Puppet ver
|
|
The test_helper code in Puppet now resets function state between each test.
This patch fixes two spec files where the function was not actually loaded in
the tests, causing them to fail.
|
|
* 2.2.x:
Use rvalue functions correctly
|
|
A bug fix in Puppet exposed that several tests were using rvalue functions
incorrectly (this was not properly checked by puppet before). This fixes those
tests.
|
|
This patch is the same approach as the one that want into 2.3.x. It
covers the functions in master that do not exist in 2.3.x.
Without this patch all of the spec tests for parser functions in stdlib
would instantiate their own scope instances. This is a problem because
the standard library is tightly coupled with the internal behavior of
Puppet. Tight coupling like this creates failures when we change the
internal behavior of Puppet. This is exactly what happened recently
when we changed the method signature for the initializer of
Puppet::Parser::Scope instances.
This patch fixes the problem by creating scope instances using the
puppet labs spec helper. The specific method that provides scope
instances in Puppet-version-independent way is something like this:
let(:scope) { PuppetlabsSpec::PuppetInternals.scope }
This patch simply implements this across the board.
Paired-with: Andrew Parker <andy@puppetlabs.com>
|
|
* 2.3.x:
(Maint) Don't mock with mocha
(Maint) Fix up the get_module_path parser function
(Maint) use PuppetlabsSpec::PuppetSeams.parser_scope (2.3.x)
(Maint) Rename PuppetlabsSpec::Puppet{Seams,Internals}
(Maint) use PuppetlabsSpec::PuppetSeams.parser_scope
(Maint) Fix interpreter lines
Conflicts:
spec/spec_helper.rb
spec/unit/puppet/parser/functions/get_module_path_spec.rb
|
|
Without this patch applied the stdlib module has load-order issues with mocha
and rspec-puppet. The root cause has yet to be determined, but we've narrowed
it down to this description:
"If any rspec-puppet example groups run before parser function example groups
and the parser function example groups use mock() then you'll get this error:"
You can exercise this explicitly with:
rspec -fd spec/unit/puppet/{provider,type,parser}
This will ensure rspec runs all of the provider and type spec tests, which are
rspec-puppet ones, before the parser function specs are run. I should also
note we empted out the test in the file_line provider to be nothing except an
empty describe block and this was still sufficient to trigger the load order
error described here.
Failures:
1) function_get_module_path when locating a module should be able to find module paths from the modulepath setting
Failure/Error: mod = mock("Puppet::Module")
NoMethodError:
undefined method `mock' for #<RSpec::Core::ExampleGroup::Nested_14::Nested_1:0x107b946c0>
# ./spec/unit/puppet/parser/functions/get_module_path_spec.rb:21
# ./spec/unit/puppet/parser/functions/get_module_path_spec.rb:29
2) function_get_module_path when locating a module should be able to find module paths when the modulepath is a list
Failure/Error: mod = mock("Puppet::Module")
NoMethodError:
undefined method `mock' for #<RSpec::Core::ExampleGroup::Nested_14::Nested_1:0x107b81ea8>
# ./spec/unit/puppet/parser/functions/get_module_path_spec.rb:21
# ./spec/unit/puppet/parser/functions/get_module_path_spec.rb:34
3) function_get_module_path when locating a module should respect the environment
Failure/Error: mod = mock("Puppet::Module")
NoMethodError:
undefined method `mock' for #<RSpec::Core::ExampleGroup::Nested_14::Nested_1:0x107b6e808>
# ./spec/unit/puppet/parser/functions/get_module_path_spec.rb:21
# ./spec/unit/puppet/parser/functions/get_module_path_spec.rb:40
Finished in 1.53 seconds
326 examples, 3 failures, 1 pending
Paired-with: Andrew Parker <andy@puppetlabs.com>
|
|
This patch switches the spec tests for the get_module_path function to
use mock objects. The underlying Puppet::Module.find method has
reasonable test coverage inside of Puppet core so we might as well break
the tight dependency while we're fixing up the specs to use the new
parser scope.
The behavior of the parser function itself should still have complete
coverage even though the tests have switched to mock the implementation
inside of Puppet.
|
|
This patch is the same approach as the one that want into 2.2.x. It
covers the functions in 2.3.x that do not exist in 2.2.x.
Without this patch all of the spec tests for parser functions in stdlib
would instantiate their own scope instances. This is a problem because
the standard library is tightly coupled with the internal behavior of
Puppet. Tight coupling like this creates failures when we change the
internal behavior of Puppet. This is exactly what happened recently
when we changed the method signature for the initializer of
Puppet::Parser::Scope instances.
This patch fixes the problem by creating scope instances using the
puppet labs spec helper. The specific method that provides scope
instances in Puppet-version-independent way is something like this:
let(:scope) { PuppetlabsSpec::PuppetInternals.scope }
This patch simply implements this across the board.
|
|
* 2.2.x:
(Maint) Rename PuppetlabsSpec::Puppet{Seams,Internals}
(Maint) use PuppetlabsSpec::PuppetSeams.parser_scope
(Maint) Fix interpreter lines
|
|
The module PuppetlabsSpec::PuppetSeams has been renamed in the
puppetlabs_spec_helper gem to PuppetlabsSpec::PuppetInternals.
The method to obtain a scope object has also changed slightly. Without
this patch the spec tests will fail because the stdlib module is not
aligned with the spec helper gem. This patch fixes the problem by
matching up messages with their receivers in the spec helper library.
Paired-with: Andrew Parker <andy@puppetlabs.com>
|
|
Without this patch all of the spec tests for parser functions in stdlib
would instantiate their own scope instances. This is a problem because
the standard library is tightly coupled with the internal behavior of
Puppet. Tight coupling like this creates failures when we change the
internal behavior of Puppet. This is exactly what happened recently
when we changed the method signature for the initializer of
Puppet::Parser::Scope instances.
This patch fixes the problem by creating scope instances using the
puppet labs spec helper. The specific method that provides scope
instances in Puppet-version-independent way is something like this:
let(:scope) { PuppetlabsSpec::PuppetSeams.parser_scope }
This patch simply implements this across the board.
|
|
This time around I actually know why I'm doing this thanks to the
reminder from Nick Lewis.
Ruby will replace itself in memory with the executable listed in the
interpreter line if the string "ruby" is not in there.
Since /usr/bin/env rspec doesn't contain the substring "ruby", you can't
actually run ruby -W1 or whatever on the file.
This patch fixes the problem by making sure "ruby" is present,
preventing ruby from replacing itself in memory.
|
