| Age | Commit message (Collapse) | Author |
|---|
|
(#13205) Rotate array/string randomley based on fqdn, fqdn_rotate()
|
|
* 2.2.x:
(#13494) Specify the behavior of zero padded strings
Update CHANGELOG, Modulefile for 2.1.3
Conflicts:
CHANGELOG
Modulefile
|
|
Without this patch the specified behavior of strings that are numeric
only and zero padded is unclear and untested in the spec tests. This is
a problem because it's not clear that range('00', '10') will actually
return [ "0", "1", ..., "10" ] instead of [ "00", "01", ..., "10" ]
This patch addresses the issue by providing explicit test coverage. If
the string conversion behavior of puppet changes, this test will begin
to fail.
|
|
|
|
Without this patch, the previous change set to the
validate_absolute_path() parser function contains Puppet 2.6
incompatible changes. stdlib 2.x is compatible with Puppet 2.6. These
changes are a problem because we cannot introduce backwards incompatible
changes in a minor release.
This patch fixes the problem by back porting the implementation of the
`Puppet::Util.absolute_path?` from 2.7.x to the function block itself.
The function block tests to see if `Puppet::Util.absolute_path?` will
respond and if not, falls back to the inline back ported implementation.
The spec tests have been updated to simulate the behavior of Puppet 2.6
even when running with Puppet 2.7.
|
|
I've seen a number of times the following error displayed to the end
user:
validate_re(): "" does not match "^true$|^false$" at /p/t/f.pp:40
This is an absolutely horrific error message. I'm to blame for it.
Users stumble over this quite often and they shouldn't have to go read
the code to sort out what's happening.
This patch makes an effort to fix the problem by adding a third,
optional, argument to validate_re(). This third argument will be the
message thrown back in the exception which will be displayed to the end
user.
This sets the stage for nicer error messages coming from modules we
write.
This patch is backwards compatible but is a new feature.
|
|
This patch adds a new function to validate if a string is an absolute
filesystem path or not.
The intent of this is to make this functionality generic and reusable.
Josh left a comment in another pull request I had:
If node_installdir or $node_vardir is not defined, then we should
raise an error, otherwise we may create a scheduled task to an
untrusted directory.
One solution to this comment is to validate the Puppet variable is an
absolute path.
Examples of this function look like:
function_validate_absolute_path
Using Puppet::Parser::Scope.new
Garbage inputs
validate_absolute_path(nil) should fail
validate_absolute_path([nil]) should fail
validate_absolute_path({"foo"=>"bar"}) should fail
validate_absolute_path({}) should fail
validate_absolute_path("") should fail
relative paths
validate_absolute_path("relative1") should fail
validate_absolute_path(".") should fail
validate_absolute_path("..") should fail
validate_absolute_path("./foo") should fail
validate_absolute_path("../foo") should fail
validate_absolute_path("etc/puppetlabs/puppet") should fail
validate_absolute_path("opt/puppet/bin") should fail
absolute paths
validate_absolute_path("C:/") should not fail
validate_absolute_path("C:\\") should not fail
validate_absolute_path("C:\\WINDOWS\\System32") should not fail
validate_absolute_path("C:/windows/system32") should not fail
validate_absolute_path("X:/foo/bar") should not fail
validate_absolute_path("X:\\foo\\bar") should not fail
validate_absolute_path("/var/tmp") should not fail
validate_absolute_path("/var/lib/puppet") should not fail
validate_absolute_path("/var/opt/../lib/puppet") should not fail
validate_absolute_path("C:\\Program Files (x86)\\Puppet Labs\\Puppet Enterprise") should not fail
validate_absolute_path("C:/Program Files (x86)/Puppet Labs/Puppet Enterprise") should not fail
Finished in 0.05637 seconds
23 examples, 0 failures
|
|
jeffmccune/ticket/2.3.x/12357_add_puppet_settings_facts
(#12357) Make facter_dot_d look in Puppet[:confdir]/facts.d
|
|
Without this patch the PE modules don't have a way to identify a
filesystem path where it's OK to place variable data related to managing
the target node. This is a problem when a module like pe_compliance
needs to write a wrapper script to the node's filesystem.
This patch addresses the problem by exposing the node's Puppet[:vardir]
setting as a Facter fact.
This fact value will be set to `nil` if Puppet is not loaded into
memory. If Puppet is loaded, e.g. using `facter --puppet` or using
`puppet agent` or `puppet apply` then the fact will automatically set
the value to Puppet[:vardir]
The value of this setting is subject to Puppet's run_mode.
This patch implements a new utility method in the standard library
module named `Facter::Util::PuppetSettings.with_puppet`. The method
accepts a block and will only invoke the block if the Puppet library is
loaded into the Ruby process. If Puppet is not loaded, the method
always returns nil. This makes it easy to define Facter facts that only
give values if Puppet is loaded in memory.
|
|
Without this patch the root_home fact fails on windows. This patch
fixes the problem by only calling methods on the object returned by the
`getent passwd root` command if the object evaluates to true.
Because there is no root account on Windows the code block simply
returns `nil` which makes the Facter fact undefined on Windows
platforms.
The root cause of the failure is that we always expected the command to
succeed and return something useful, and it may not on all supported
platforms.
|
|
This function is used to validate a string is less than a maximum length. The
string, or array of strings, is passed as the first argument to the function.
The maximum length of the string is passed as the second argument.
It is useful to validate, for example, that Puppet is not sending a username
to a downstream system that the system cannot cope with, but that might not
cause an error message - for example, MySQL will not accept a username of
more than 16 characters. This enables a Puppet administrator to validate
the data that it may have been passed from upstream through, for example,
Hiera.
|
|
* Implement a simple destroy method.
* Add tests for it
* Refactor code, so file is actually read only once. However, due
to the nature how provider tests are run, we need to ensure that
the file is read before we open it to write it.
|
|
* 2.2.x:
Check according to rfc1035
Add additional domain name tests
(maint) Memoize scope in domain_name spec
|
|
Without this patch some valid domain names are not covered in the spec
tests as Stig Sandbeck Mathisen <ssm@debian.org> points out. This patch
adds spec tests for the domains "." and "x.com" which are both valid.
|
|
This is an opportunity improvement since I'm in the code. Get rid of
instance variables in the spec test and replace them with a memo let
method block.
|
|
* 2.2.x:
(#11901) Fix sort order error in tests for 'keys' and 'values'
|
|
Between Ruby 1.8.7 p352 and p357 the way arrays were returned when using
keys and values in Ruby changed, and due to assumption about the
ordering our tests are now failing.
This patch fixes the issue by using the =~ operator matcher in rspec.
This matcher is implemented as RSpec::Matchers::MatchArray and performs
multiset equality matching of arrays. Order doesn't matter, but
duplicate values do.
This patch also switches @scope instance variables to memoized let
methods for clarity in the code.
Original Author: Ken Barber
Reviewed-by: Nick Lewis
This commit closes GH-29
|
|
* 2.2.x:
(#11873) time function spec failure on Fixnum matcher
|
|
The rspec code for the time function was trying to match the type to be a
'Fixnum'. Ruby will sometimes make this a 'Bignum' depending on its internals
and we can't rely on this to be true all the time.
This patch just makes sure the type is an integer instead.
|
|
OS X 10.7 introduced salted-SHA512 password hashes as opposed to the
older LANMAN + SHA1 hashes. To assist in generating properly-formatted
password hashes, this commit adds the str2saltedsha512() function which
accepts a single string argument (the password) and returns a
salted-SHA512 password hash which can be fed as the password attribute
of a user resource in OS X 10.7.
Spec tests are also added to ensure that functionality isn't broken with
future commits.
|
|
This commit adds a new function called get_module_path.
get_module_path returns the absolute path of a specified module. The
code and functionality is very similar to how templates and files
are detected inside of modules.
the function has been tested against puppet 2.6.10 and 2.7.x
|
|
kbarber/issue/master/8925-user_ssl_certs"
This reverts commit 14852e0259e1e43371dbcb2675e00c6d6e614f05, reversing
changes made to a95dccd464b55945feb8bcf7483f777c25164115.
This is to fix the broken build (failing tests) as per #8925 and #10007
|
|
(#8925) Added new function called 'get_certificate' for retrieving
|
|
Without this patch applied, the stdlib module does not provide a
root_home fact. This fact is necessary to easily determine the root
account home directory on platforms Puppet is supported on.
The major variations this fact address are:
---
solaris: /
linux: /root
macosx: /var/root
Spec tests using rspec have been provided as well to cover these three
general cases. Windows tests are marked as pending.
|
|
certificates from a CA (or locally).
This function works by either obtaining the file locally
or remotely based on Puppets configuration.
Also added get_pubkey which wraps get_certificate and extracts the
public key.
|
|
Closes pull request #12
Reviewed-by: Jeff McCune
Verified all spec tests pass using rspec **/*_spec.rb
* issue/master/8797_puppetlabs-functions_merge: (164 commits)
* Moved kwalify to puppetlabs-kwalify project * Re-arranged tests in line with puppetlabs-stdlib
Prep for stdlib merge * Renamed load_yaml & load_json to parseyaml & parsejson * Renamed is_valid_* functions and remove the 'valid_'
Fix some ruby 1.9.2 issues.
(#3) Provide documentation for remaining functions.
(#3) Apply missing documentation to more functions.
Remove rand.
Some improvements to values_at tests.
(#1) provide some more detailed tests for a number of functions.
Removed date stub since this functinality is available in strftime anyway.
(#2) fix is_string finally so it also makes sure numbers return false.
(#2) unstub is_valid_domain_name
Added doc strings for first five functions
Removed join_with_prefix.
(#2) unstub is_valid_mac_address.
Allow sort for strings.
Count functionality overlaps with size - so removing it.
Removed crontab functions instead of unstubbing them.
Removed load_variables. load_yaml is sufficient to solve this problem on its own.
Remove is_valid_netmask instead of unstubbing. Doesn't seem like a sensible function on its own.
(#2) unstub is_numeric function.
...
|
|
It was decided that maintaining puppetlabs-functions and
puppetlabs-stdlib was duplication as both are trying to
achieve the same goal.
This patch provides a merge of the puppetlabs-functions
into the puppetlabs-stdlib repository, with history
preservation.
The following conflicts were found and resolved:
* LICENSE file from functions was used as it aligns with
ASL usage instructions and contains relevant copyright
information:
http://www.apache.org/licenses/LICENSE-2.0.html
* Used spec_helper.rb from functions - this is what
Puppet core uses and doesn't break tests.
* Merged .gitignore and spec.opts options.
|
|
* Re-arranged tests in line with puppetlabs-stdlib
|
|
* Renamed load_yaml & load_json to parseyaml & parsejson
* Renamed is_valid_* functions and remove the 'valid_'
|
|
Without this patch the resource whole_line would be included in the
stable stdlib module shipping in PE 1.2. Ideally the name will be
stable and unchanging in the future.
There was quite a bit of concern over whole_line being an unwise name.
file_line appears to be the most suitable name and least likely to need
another rename in the future.
|
|
* refactor/master/8665_whole_line:
(#8665) Change type from append_line to whole_line
|
|
The accounts module is making use of validate_array() and
validate_string() which do not exist int he stdlib module without this
patch.
This patch adds the two functions to the stdlib with unit tests.
Reviewed-by: Dan Bode
|
|
|
|
In Puppet, it is not possible to reassign hash
values.
This function allows a reasonable way to perform
hash munging in Puppet.
Reviewed-by: Jeff McCune
|
|
It is difficult to use existance of keys in a hash
as a boolean condition in Puppet (see #8705)
This function provides a working solution until
the underlying issue in Puppet can be resolved.
Reviewed-by: Jeff McCune
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
own.
|
|
function on its own.
|
