#	$OpenBSD: sshd_config,v 1.81 2009/10/08 14:03:41 markus Exp $
#	$FreeBSD: src/crypto/openssh/sshd_config,v 1.49.2.2.2.1 2010/06/14 02:09:06 kensmith Exp $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.

# Note that some of FreeBSD's defaults differ from OpenBSD's, and
# FreeBSD has a few additional options.

#VersionAddendum FreeBSD-20100308

<%- unless sshd_head_additional_options.to_s.empty? then %>
<%= sshd_head_additional_options %>
<%- end %>

# What ports, IPs and protocols we listen for
<%- sshd_ports.each do |port| -%>
<%- if port.to_s == 'off' then -%>
#Port -- disabled by puppet
<% else -%>
Port <%= port %>
<% end -%>
<%- end -%>

#AddressFamily any
<% for address in sshd_listen_address -%>
ListenAddress <%= address %>
<% end -%>

# The default requires explicit activation of protocol 1
Protocol 2

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
HostKey /etc/ssh/ssh_host_rsa_key
HostKey /etc/ssh/ssh_host_dsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024

# Logging
# obsoletes QuietMode and FascistLogging
SyslogFacility AUTH
LogLevel INFO

# Authentication:

LoginGraceTime 600
<%- unless sshd_permit_root_login.to_s.empty? then -%>
PermitRootLogin <%= sshd_permit_root_login -%>
<%- else -%>
PermitRootLogin without-password
<%- end -%>

<%- if sshd_strict_modes.to_s == 'yes' then -%>
StrictModes yes
<%- else -%>
StrictModes no
<%- end -%>

#MaxAuthTries 6
#MaxSessions 10

<%- if sshd_rsa_authentication.to_s == 'yes' then -%>
RSAAuthentication yes
<%- else -%>
RSAAuthentication no
<%- end -%>

<%- if sshd_pubkey_authentication.to_s == 'yes' then -%>
PubkeyAuthentication yes
<%- else -%>
PubkeyAuthentication no
<%- end -%>

<%- unless sshd_authorized_keys_file.to_s.empty? then -%>
AuthorizedKeysFile <%= sshd_authorized_keys_file %>
<%- else -%>
AuthorizedKeysFile %h/.ssh/authorized_keys
<%- end -%>

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
<%- if sshd_rhosts_rsa_authentication.to_s == 'yes' then -%>
RhostsRSAAuthentication yes
<%- else -%>
RhostsRSAAuthentication no
<% end -%>

# similar for protocol version 2
<%- if sshd_hostbased_authentication.to_s == 'yes' then -%>
HostbasedAuthentication yes
<%- else -%>
HostbasedAuthentication no
<% end -%>

# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# Change to yes to enable built-in password authentication.
<%- if sshd_password_authentication.to_s == 'yes' then -%>
PasswordAuthentication yes
<%- else -%>
PasswordAuthentication no
<%- end -%>

<%- if sshd_permit_empty_passwords.to_s == 'yes' then -%>
PermitEmptyPasswords yes
<% else -%>
PermitEmptyPasswords no
<% end -%>

# Change to no to disable PAM authentication
<%- if sshd_challenge_response_authentication.to_s == 'yes' then -%>
ChallengeResponseAuthentication yes
<%- else -%>
ChallengeResponseAuthentication no
<%- end -%>

# Kerberos options
<%- if sshd_kerberos_authentication.to_s == 'yes' then -%>
KerberosAuthentication yes
<%- else -%>
KerberosAuthentication no
<%- end -%>
<%- if sshd_kerberos_orlocalpasswd.to_s == 'yes' then -%>
KerberosOrLocalPasswd yes
<%- else -%>
KerberosOrLocalPasswd no
<%- end -%>
<%- if sshd_kerberos_ticketcleanup.to_s == 'yes' then -%>
KerberosTicketCleanup yes
<%- else -%>
KerberosTicketCleanup no
<%- end -%>

# GSSAPI options
<%- if sshd_gssapi_authentication.to_s == 'yes' then -%>
GSSAPIAuthentication yes
<%- else -%>
GSSAPIAuthentication no
<%- end -%>
<%- if sshd_gssapi_authentication.to_s == 'yes' then -%>
GSSAPICleanupCredentials yes
<%- else -%>
GSSAPICleanupCredentials yes
<%- end -%>

# Set this to 'no' to disable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will 
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
<%- if sshd_use_pam.to_s == 'yes' then -%>
UsePAM yes
<%- else -%>
UsePAM no
<%- end -%>

<%- if sshd_agent_forwarding.to_s == 'yes' then -%>
AllowAgentForwarding yes
<%- else -%>
AllowAgentForwarding no
<%- end -%>

<%- if sshd_tcp_forwarding.to_s == 'yes' then -%>
AllowTcpForwarding yes
<%- else -%>
AllowTcpForwarding no
<%- end -%>

#GatewayPorts no
<%- if sshd_x11_forwarding.to_s == 'yes' then -%>
X11Forwarding yes
<%- else -%>
X11Forwarding no
<%- end -%>

X11DisplayOffset 10
#X11UseLocalhost yes
PrintMotd <%= sshd_print_motd %>
#PrintLastLog yes
TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS yes
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
#ChrootDirectory none

# no default banner path
#Banner none

# override default of no subsystems
<%- if sshd_sftp_subsystem.to_s.empty? then %>
Subsystem	sftp	/usr/libexec/sftp-server
<%- else %>
Subsystem      sftp    <%= sshd_sftp_subsystem %>
<%- end %>

# Example of overriding settings on a per-user basis
#Match User anoncvs
#	X11Forwarding no
#	AllowTcpForwarding no
#	ForceCommand cvs server

<%- unless sshd_allowed_users.to_s.empty? then -%>
AllowUsers <%= sshd_allowed_users -%>
<%- end -%>

<%- unless sshd_allowed_groups.to_s.empty? then %>
AllowGroups <%= sshd_allowed_groups %>
<%- end %>

<%- if sshd_hardened_ssl.to_s == 'yes' then -%>
Ciphers aes256-ctr
MACs hmac-sha1
<%- end -%>

<%- unless sshd_tail_additional_options.to_s.empty? then %>
<%= sshd_tail_additional_options %>
<%- end %>