From ac6e09ecde7b78acecb7eb357a2e559824f4cbe3 Mon Sep 17 00:00:00 2001 From: Jerome Charaoui Date: Thu, 7 May 2015 11:34:07 -0400 Subject: Adjust variable lookup in templates to silence deprecation warnings, fixes #1 --- templates/sshd_config/CentOS_6.erb | 46 ++++++++++++------------ templates/sshd_config/CentOS_7.erb | 48 ++++++++++++------------- templates/sshd_config/Debian_jessie.erb | 60 ++++++++++++++++---------------- templates/sshd_config/Debian_sid.erb | 60 ++++++++++++++++---------------- templates/sshd_config/Debian_squeeze.erb | 60 ++++++++++++++++---------------- templates/sshd_config/Debian_wheezy.erb | 60 ++++++++++++++++---------------- templates/sshd_config/FreeBSD.erb | 56 ++++++++++++++--------------- templates/sshd_config/Gentoo.erb | 46 ++++++++++++------------ templates/sshd_config/OpenBSD.erb | 44 +++++++++++------------ templates/sshd_config/Ubuntu.erb | 60 ++++++++++++++++---------------- templates/sshd_config/Ubuntu_lucid.erb | 50 +++++++++++++------------- 11 files changed, 295 insertions(+), 295 deletions(-) (limited to 'templates/sshd_config') diff --git a/templates/sshd_config/CentOS_6.erb b/templates/sshd_config/CentOS_6.erb index 4c1e28a..4593a91 100644 --- a/templates/sshd_config/CentOS_6.erb +++ b/templates/sshd_config/CentOS_6.erb @@ -10,11 +10,11 @@ # possible, but leave them commented. Uncommented options change a # default value. -<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> <%= s %> <% end -%> -<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> <% if port == 'off' -%> #Port -- disabled by puppet <% else -%> @@ -23,7 +23,7 @@ Port <%= port %> <% end -%> # Use these options to restrict which interfaces/protocols sshd will bind to -<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> ListenAddress <%= address %> <% end -%> @@ -51,39 +51,39 @@ SyslogFacility AUTHPRIV # Authentication: #LoginGraceTime 2m -PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> -StrictModes <%= scope.lookupvar('sshd::strict_modes') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> #MaxAuthTries 6 -RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> -PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> -AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> #AuthorizedKeysCommand none #AuthorizedKeysCommandRunAs nobody # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> # similar for protocol version 2 -HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files -IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %> +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> # To disable tunneled clear text passwords, change to no here! -PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> # To enable empty passwords, change to yes (NOT RECOMMENDED) -PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> # Change to no to disable s/key passwords -ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> # Kerberos options #KerberosAuthentication no @@ -106,7 +106,7 @@ ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_au # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. #UsePAM no -UsePAM <%= scope.lookupvar('sshd::use_pam') %> +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> # Accept locale-related environment variables AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES @@ -115,13 +115,13 @@ AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE AcceptEnv XMODIFIERS #AllowAgentForwarding yes -AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> #GatewayPorts no #X11Forwarding no -X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> #X11DisplayOffset 10 #X11UseLocalhost yes -PrintMotd <%= scope.lookupvar('sshd::print_motd') %> +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> #PrintLastLog yes #TCPKeepAlive yes #UseLogin no @@ -141,16 +141,16 @@ PrintMotd <%= scope.lookupvar('sshd::print_motd') %> #Banner /some/path # override default of no subsystems -Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/libexec/openssh/sftp-server' : s %> +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/libexec/openssh/sftp-server' : s %> -<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> AllowUsers <%= s %> <% end -%> -<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> AllowGroups <%= s %> <%- end -%> -<% if scope.lookupvar('sshd::hardened') == 'yes' -%> +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> <% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> KexAlgorithms curve25519-sha256@libssh.org Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr @@ -167,6 +167,6 @@ MACs hmac-sha1 # AllowTcpForwarding no # ForceCommand cvs server # -<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> <%= s %> <% end -%> diff --git a/templates/sshd_config/CentOS_7.erb b/templates/sshd_config/CentOS_7.erb index 5acef6d..f55fb9d 100644 --- a/templates/sshd_config/CentOS_7.erb +++ b/templates/sshd_config/CentOS_7.erb @@ -10,7 +10,7 @@ # possible, but leave them commented. Uncommented options change a # default value. -<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> <%= s %> <% end -%> @@ -18,14 +18,14 @@ # SELinux about this change. # semanage port -a -t ssh_port_t -p tcp #PORTNUMBER # -<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> <% if port == 'off' -%> #Port -- disabled by puppet <% else -%> Port <%= port %> <% end -%> <% end -%> -<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> ListenAddress <%= address %> <% end -%> @@ -35,7 +35,7 @@ ListenAddress <%= address %> # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 -<% scope.lookupvar('sshd::hostkey_type').to_a.each do |hostkey_type| -%> +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key <% end -%> @@ -55,39 +55,39 @@ SyslogFacility AUTHPRIV # Authentication: #LoginGraceTime 2m -PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> -StrictModes <%= scope.lookupvar('sshd::strict_modes') %> +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> #MaxAuthTries 6 #MaxSessions 10 -RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> -PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> -AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> #AuthorizedPrincipalsFile none #AuthorizedKeysCommand none #AuthorizedKeysCommandRunAs nobody # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> # similar for protocol version 2 -HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files -IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %> +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> # To disable tunneled clear text passwords, change to no here! -PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> # To enable empty passwords, change to yes (NOT RECOMMENDED) -PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> # Change to no to disable s/key passwords -ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> # Kerberos options #KerberosAuthentication no @@ -114,16 +114,16 @@ GSSAPICleanupCredentials yes # WARNING: 'UsePAM no' is not supported in Red Hat Enterprise Linux and may cause several # problems. #UsePAM no -UsePAM <%= scope.lookupvar('sshd::use_pam') %> +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> #AllowAgentForwarding yes -AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> #GatewayPorts no #X11Forwarding no -X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> #X11DisplayOffset 10 #X11UseLocalhost yes -PrintMotd <%= scope.lookupvar('sshd::print_motd') %> +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> #PrintLastLog yes #TCPKeepAlive yes #UseLogin no @@ -151,12 +151,12 @@ AcceptEnv XMODIFIERS # override default of no subsystems -Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/libexec/openssh/sftp-server' : s %> +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/libexec/openssh/sftp-server' : s %> -<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> AllowUsers <%= s %> <% end -%> -<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> AllowGroups <%= s %> <%- end -%> @@ -164,7 +164,7 @@ AllowGroups <%= s %> #Host *.local # CheckHostIP no -<% if scope.lookupvar('sshd::hardened') == 'yes' -%> +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> <% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> KexAlgorithms curve25519-sha256@libssh.org Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr @@ -181,6 +181,6 @@ MACs hmac-sha1 # AllowTcpForwarding no # ForceCommand cvs server -<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> <%= s %> <% end -%> diff --git a/templates/sshd_config/Debian_jessie.erb b/templates/sshd_config/Debian_jessie.erb index 0138acf..0f39252 100644 --- a/templates/sshd_config/Debian_jessie.erb +++ b/templates/sshd_config/Debian_jessie.erb @@ -3,12 +3,12 @@ # Package generated configuration file # See the sshd_config(5) manpage for details -<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> <%= s %> <% end -%> # What ports, IPs and protocols we listen for -<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> <% if port == 'off' -%> #Port -- disabled by puppet <% else -%> @@ -17,12 +17,12 @@ Port <%= port %> <% end -%> # Use these options to restrict which interfaces/protocols sshd will bind to -<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> ListenAddress <%= address %> <% end -%> Protocol 2 # HostKeys for protocol version 2 -<% scope.lookupvar('sshd::hostkey_type').to_a.each do |hostkey_type| -%> +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key <% end -%> #Privilege Separation is turned on for security @@ -38,45 +38,45 @@ LogLevel INFO # Authentication: LoginGraceTime 120 -PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> -StrictModes <%= scope.lookupvar('sshd::strict_modes') %> +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> -RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> -PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> -AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> # Don't read the user's ~/.rhosts and ~/.shosts files -IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %> +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> # For this to work you will also need host keys in /etc/ssh_known_hosts -RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> # similar for protocol version 2 -HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) -PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) -ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> # Change to no to disable tunnelled clear text passwords -PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> # Kerberos options -KerberosAuthentication <%= scope.lookupvar('sshd::kerberos_authentication') %> +KerberosAuthentication <%= scope.lookupvar('::sshd::kerberos_authentication') %> #KerberosGetAFSToken no -KerberosOrLocalPasswd <%= scope.lookupvar('sshd::kerberos_orlocalpasswd') %> -KerberosTicketCleanup <%= scope.lookupvar('sshd::kerberos_ticketcleanup') %> +KerberosOrLocalPasswd <%= scope.lookupvar('::sshd::kerberos_orlocalpasswd') %> +KerberosTicketCleanup <%= scope.lookupvar('::sshd::kerberos_ticketcleanup') %> # GSSAPI options -GSSAPIAuthentication <%= scope.lookupvar('sshd::gssapi_authentication') %> -GSSAPICleanupCredentials <%= scope.lookupvar('sshd::gssapi_cleanupcredentials') %> +GSSAPIAuthentication <%= scope.lookupvar('::sshd::gssapi_authentication') %> +GSSAPICleanupCredentials <%= scope.lookupvar('::sshd::gssapi_cleanupcredentials') %> -X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> X11DisplayOffset 10 -PrintMotd <%= scope.lookupvar('sshd::print_motd') %> +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> PrintLastLog yes TCPKeepAlive yes #UseLogin no @@ -87,7 +87,7 @@ TCPKeepAlive yes # Allow client to pass locale environment variables AcceptEnv LANG LC_* -Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will @@ -98,25 +98,25 @@ Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. -UsePAM <%= scope.lookupvar('sshd::use_pam') %> +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> -AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> -AllowAgentForwarding <%= scope.lookupvar('sshd::agent_forwarding') %> +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> -<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> AllowUsers <%= s %> <% end -%> -<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> AllowGroups <%= s %> <%- end -%> -<% if scope.lookupvar('sshd::hardened') == 'yes' -%> +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> KexAlgorithms curve25519-sha256@libssh.org Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com <% end -%> -<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> <%= s %> <% end -%> diff --git a/templates/sshd_config/Debian_sid.erb b/templates/sshd_config/Debian_sid.erb index 0138acf..0f39252 100644 --- a/templates/sshd_config/Debian_sid.erb +++ b/templates/sshd_config/Debian_sid.erb @@ -3,12 +3,12 @@ # Package generated configuration file # See the sshd_config(5) manpage for details -<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> <%= s %> <% end -%> # What ports, IPs and protocols we listen for -<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> <% if port == 'off' -%> #Port -- disabled by puppet <% else -%> @@ -17,12 +17,12 @@ Port <%= port %> <% end -%> # Use these options to restrict which interfaces/protocols sshd will bind to -<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> ListenAddress <%= address %> <% end -%> Protocol 2 # HostKeys for protocol version 2 -<% scope.lookupvar('sshd::hostkey_type').to_a.each do |hostkey_type| -%> +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key <% end -%> #Privilege Separation is turned on for security @@ -38,45 +38,45 @@ LogLevel INFO # Authentication: LoginGraceTime 120 -PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> -StrictModes <%= scope.lookupvar('sshd::strict_modes') %> +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> -RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> -PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> -AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> # Don't read the user's ~/.rhosts and ~/.shosts files -IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %> +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> # For this to work you will also need host keys in /etc/ssh_known_hosts -RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> # similar for protocol version 2 -HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) -PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) -ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> # Change to no to disable tunnelled clear text passwords -PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> # Kerberos options -KerberosAuthentication <%= scope.lookupvar('sshd::kerberos_authentication') %> +KerberosAuthentication <%= scope.lookupvar('::sshd::kerberos_authentication') %> #KerberosGetAFSToken no -KerberosOrLocalPasswd <%= scope.lookupvar('sshd::kerberos_orlocalpasswd') %> -KerberosTicketCleanup <%= scope.lookupvar('sshd::kerberos_ticketcleanup') %> +KerberosOrLocalPasswd <%= scope.lookupvar('::sshd::kerberos_orlocalpasswd') %> +KerberosTicketCleanup <%= scope.lookupvar('::sshd::kerberos_ticketcleanup') %> # GSSAPI options -GSSAPIAuthentication <%= scope.lookupvar('sshd::gssapi_authentication') %> -GSSAPICleanupCredentials <%= scope.lookupvar('sshd::gssapi_cleanupcredentials') %> +GSSAPIAuthentication <%= scope.lookupvar('::sshd::gssapi_authentication') %> +GSSAPICleanupCredentials <%= scope.lookupvar('::sshd::gssapi_cleanupcredentials') %> -X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> X11DisplayOffset 10 -PrintMotd <%= scope.lookupvar('sshd::print_motd') %> +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> PrintLastLog yes TCPKeepAlive yes #UseLogin no @@ -87,7 +87,7 @@ TCPKeepAlive yes # Allow client to pass locale environment variables AcceptEnv LANG LC_* -Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will @@ -98,25 +98,25 @@ Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. -UsePAM <%= scope.lookupvar('sshd::use_pam') %> +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> -AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> -AllowAgentForwarding <%= scope.lookupvar('sshd::agent_forwarding') %> +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> -<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> AllowUsers <%= s %> <% end -%> -<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> AllowGroups <%= s %> <%- end -%> -<% if scope.lookupvar('sshd::hardened') == 'yes' -%> +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> KexAlgorithms curve25519-sha256@libssh.org Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr MACs hmac-sha2-512-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-ripemd160-etm@openssh.com,umac-128-etm@openssh.com,hmac-sha2-512,hmac-sha2-256,hmac-ripemd160,umac-128@openssh.com <% end -%> -<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> <%= s %> <% end -%> diff --git a/templates/sshd_config/Debian_squeeze.erb b/templates/sshd_config/Debian_squeeze.erb index d42fac1..5845a3d 100644 --- a/templates/sshd_config/Debian_squeeze.erb +++ b/templates/sshd_config/Debian_squeeze.erb @@ -3,12 +3,12 @@ # Package generated configuration file # See the sshd(8) manpage for details -<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> <%= s %> <% end -%> # What ports, IPs and protocols we listen for -<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> <% if port == 'off' -%> #Port -- disabled by puppet <% else -%> @@ -17,12 +17,12 @@ Port <%= port %> <% end -%> # Use these options to restrict which interfaces/protocols sshd will bind to -<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> ListenAddress <%= address %> <% end -%> Protocol 2 # HostKeys for protocol version 2 -<% scope.lookupvar('sshd::hostkey_type').to_a.each do |hostkey_type| -%> +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key <% end -%> @@ -39,47 +39,47 @@ LogLevel INFO # Authentication: LoginGraceTime 120 -PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> -StrictModes <%= scope.lookupvar('sshd::strict_modes') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> -RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> -PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> -AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> # Don't read the user's ~/.rhosts and ~/.shosts files -IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %> +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> # For this to work you will also need host keys in /etc/ssh_known_hosts -RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> # similar for protocol version 2 -HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) -PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) -ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> # To disable tunneled clear text passwords, change to no here! -PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> # Kerberos options -KerberosAuthentication <%= scope.lookupvar('sshd::kerberos_authentication') %> -KerberosOrLocalPasswd <%= scope.lookupvar('sshd::kerberos_orlocalpasswd') %> -KerberosTicketCleanup <%= scope.lookupvar('sshd::kerberos_ticketcleanup') %> +KerberosAuthentication <%= scope.lookupvar('::sshd::kerberos_authentication') %> +KerberosOrLocalPasswd <%= scope.lookupvar('::sshd::kerberos_orlocalpasswd') %> +KerberosTicketCleanup <%= scope.lookupvar('::sshd::kerberos_ticketcleanup') %> # GSSAPI options -GSSAPIAuthentication <%= scope.lookupvar('sshd::gssapi_authentication') %> -GSSAPICleanupCredentials <%= scope.lookupvar('sshd::gssapi_cleanupcredentials') %> +GSSAPIAuthentication <%= scope.lookupvar('::sshd::gssapi_authentication') %> +GSSAPICleanupCredentials <%= scope.lookupvar('::sshd::gssapi_cleanupcredentials') %> -X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> X11DisplayOffset 10 -PrintMotd <%= scope.lookupvar('sshd::print_motd') %> +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> PrintLastLog yes TCPKeepAlive yes @@ -91,7 +91,7 @@ TCPKeepAlive yes # Allow client to pass locale environment variables AcceptEnv LANG LC_* -Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will @@ -102,24 +102,24 @@ Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. -UsePAM <%= scope.lookupvar('sshd::use_pam') %> +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> -AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> -AllowAgentForwarding <%= scope.lookupvar('sshd::agent_forwarding') %> +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> -<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> AllowUsers <%= s %> <% end -%> -<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> AllowGroups <%= s %> <%- end -%> -<% if scope.lookupvar('sshd::hardened') == 'yes' -%> +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> Ciphers aes256-ctr MACs hmac-sha1 <% end -%> -<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> <%= s %> <% end -%> diff --git a/templates/sshd_config/Debian_wheezy.erb b/templates/sshd_config/Debian_wheezy.erb index 961b26d..bfa6ea8 100644 --- a/templates/sshd_config/Debian_wheezy.erb +++ b/templates/sshd_config/Debian_wheezy.erb @@ -3,12 +3,12 @@ # Package generated configuration file # See the sshd(8) manpage for details -<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> <%= s %> <% end -%> # What ports, IPs and protocols we listen for -<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> <% if port == 'off' -%> #Port -- disabled by puppet <% else -%> @@ -17,12 +17,12 @@ Port <%= port %> <% end -%> # Use these options to restrict which interfaces/protocols sshd will bind to -<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> ListenAddress <%= address %> <% end -%> Protocol 2 # HostKeys for protocol version 2 -<% scope.lookupvar('sshd::hostkey_type').to_a.each do |hostkey_type| -%> +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key <% end -%> #Privilege Separation is turned on for security @@ -38,47 +38,47 @@ LogLevel INFO # Authentication: LoginGraceTime 600 -PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> -StrictModes <%= scope.lookupvar('sshd::strict_modes') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> -RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> -PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> -AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> # Don't read the user's ~/.rhosts and ~/.shosts files -IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %> +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> # For this to work you will also need host keys in /etc/ssh_known_hosts -RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> # similar for protocol version 2 -HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) -PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) -ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> # To disable tunneled clear text passwords, change to no here! -PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> # Kerberos options -KerberosAuthentication <%= scope.lookupvar('sshd::kerberos_authentication') %> -KerberosOrLocalPasswd <%= scope.lookupvar('sshd::kerberos_orlocalpasswd') %> -KerberosTicketCleanup <%= scope.lookupvar('sshd::kerberos_ticketcleanup') %> +KerberosAuthentication <%= scope.lookupvar('::sshd::kerberos_authentication') %> +KerberosOrLocalPasswd <%= scope.lookupvar('::sshd::kerberos_orlocalpasswd') %> +KerberosTicketCleanup <%= scope.lookupvar('::sshd::kerberos_ticketcleanup') %> # GSSAPI options -GSSAPIAuthentication <%= scope.lookupvar('sshd::gssapi_authentication') %> -GSSAPICleanupCredentials <%= scope.lookupvar('sshd::gssapi_cleanupcredentials') %> +GSSAPIAuthentication <%= scope.lookupvar('::sshd::gssapi_authentication') %> +GSSAPICleanupCredentials <%= scope.lookupvar('::sshd::gssapi_cleanupcredentials') %> -X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> X11DisplayOffset 10 -PrintMotd <%= scope.lookupvar('sshd::print_motd') %> +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> PrintLastLog yes TCPKeepAlive yes @@ -90,7 +90,7 @@ TCPKeepAlive yes # Allow client to pass locale environment variables AcceptEnv LANG LC_* -Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will @@ -101,20 +101,20 @@ Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. -UsePAM <%= scope.lookupvar('sshd::use_pam') %> +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> -AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> -AllowAgentForwarding <%= scope.lookupvar('sshd::agent_forwarding') %> +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> -<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> AllowUsers <%= s %> <% end -%> -<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> AllowGroups <%= s %> <%- end -%> -<% if scope.lookupvar('sshd::hardened') == 'yes' -%> +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> <% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> KexAlgorithms curve25519-sha256@libssh.org Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr @@ -125,6 +125,6 @@ MACs hmac-sha1 <% end -%> <% end -%> -<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> <%= s %> <% end -%> diff --git a/templates/sshd_config/FreeBSD.erb b/templates/sshd_config/FreeBSD.erb index 91b5e77..5298ade 100644 --- a/templates/sshd_config/FreeBSD.erb +++ b/templates/sshd_config/FreeBSD.erb @@ -16,12 +16,12 @@ #VersionAddendum FreeBSD-20100308 -<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> <%= s %> <% end -%> # What ports, IPs and protocols we listen for -<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> <% if port == 'off' -%> #Port -- disabled by puppet <% else -%> @@ -30,7 +30,7 @@ Port <%= port %> <% end -%> #AddressFamily any -<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> ListenAddress <%= address %> <% end -%> @@ -40,7 +40,7 @@ Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 -<% scope.lookupvar('sshd::hostkey_type').to_a.each do |hostkey_type| -%> +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key <% end -%> @@ -56,24 +56,24 @@ LogLevel INFO # Authentication: LoginGraceTime 600 -PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> -StrictModes <%= scope.lookupvar('sshd::strict_modes') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> #MaxAuthTries 6 #MaxSessions 10 -RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> -PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> -AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> # similar for protocol version 2 -HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication @@ -82,21 +82,21 @@ HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> #IgnoreRhosts yes # Change to yes to enable built-in password authentication. -PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> -PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> # Change to no to disable PAM authentication -ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> # Kerberos options -KerberosAuthentication <%= scope.lookupvar('sshd::kerberos_authentication') %> -KerberosOrLocalPasswd <%= scope.lookupvar('sshd::kerberos_orlocalpasswd') %> -KerberosTicketCleanup <%= scope.lookupvar('sshd::kerberos_ticketcleanup') %> +KerberosAuthentication <%= scope.lookupvar('::sshd::kerberos_authentication') %> +KerberosOrLocalPasswd <%= scope.lookupvar('::sshd::kerberos_orlocalpasswd') %> +KerberosTicketCleanup <%= scope.lookupvar('::sshd::kerberos_ticketcleanup') %> # GSSAPI options -GSSAPIAuthentication <%= scope.lookupvar('sshd::gssapi_authentication') %> -GSSAPICleanupCredentials <%= scope.lookupvar('sshd::gssapi_cleanupcredentials') %> +GSSAPIAuthentication <%= scope.lookupvar('::sshd::gssapi_authentication') %> +GSSAPICleanupCredentials <%= scope.lookupvar('::sshd::gssapi_cleanupcredentials') %> # Set this to 'no' to disable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will @@ -107,14 +107,14 @@ GSSAPICleanupCredentials <%= scope.lookupvar('sshd::gssapi_cleanupcredentials') # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. -UsePAM <%= scope.lookupvar('sshd::use_pam') %> +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> -AllowAgentForwarding <%= scope.lookupvar('sshd::agent_forwarding') %> +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> -AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> #GatewayPorts no -X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> X11DisplayOffset 10 #X11UseLocalhost yes @@ -137,7 +137,7 @@ TCPKeepAlive yes #Banner none # override default of no subsystems -Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/libexec/sftp-server' : s %> +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/libexec/sftp-server' : s %> # Example of overriding settings on a per-user basis #Match User anoncvs @@ -145,14 +145,14 @@ Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? # AllowTcpForwarding no # ForceCommand cvs server -<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> AllowUsers <%= s %> <% end -%> -<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> AllowGroups <%= s %> <%- end -%> -<% if scope.lookupvar('sshd::hardened') == 'yes' -%> +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> <% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> KexAlgorithms curve25519-sha256@libssh.org Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr @@ -163,6 +163,6 @@ MACs hmac-sha1 <% end -%> <% end -%> -<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> <%= s %> <% end -%> diff --git a/templates/sshd_config/Gentoo.erb b/templates/sshd_config/Gentoo.erb index ac6ae51..022a26e 100644 --- a/templates/sshd_config/Gentoo.erb +++ b/templates/sshd_config/Gentoo.erb @@ -10,11 +10,11 @@ # possible, but leave them commented. Uncommented options change a # default value. -<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> <%= s %> <% end -%> -<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> <% if port == 'off' -%> #Port -- disabled by puppet <% else -%> @@ -23,7 +23,7 @@ Port <%= port %> <% end -%> # Use these options to restrict which interfaces/protocols sshd will bind to -<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> ListenAddress <%= address %> <% end -%> #AddressFamily any @@ -51,39 +51,39 @@ Protocol 2 # Authentication: #LoginGraceTime 2m -PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> -StrictModes <%= scope.lookupvar('sshd::strict_modes') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> #MaxAuthTries 6 -RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> -PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> -AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> # similar for protocol version 2 -HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files -IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %> +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> # To disable tunneled clear text passwords, change to no here! -PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> # To enable empty passwords, change to yes (NOT RECOMMENDED) -PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> # Change to no to disable s/key passwords -ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> # Kerberos options #KerberosAuthentication no @@ -106,15 +106,15 @@ ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_au # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. -UsePAM <%= scope.lookupvar('sshd::use_pam') %> +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> -AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> #GatewayPorts no -X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> #X11DisplayOffset 10 #X11UseLocalhost yes -PrintMotd <%= scope.lookupvar('sshd::print_motd') %> +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> #PrintLastLog yes #TCPKeepAlive yes #UseLogin no @@ -132,7 +132,7 @@ PrintMotd <%= scope.lookupvar('sshd::print_motd') %> #Banner /some/path # override default of no subsystems -Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/lib/misc/sftp-server' : s %> +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/misc/sftp-server' : s %> # Example of overriding settings on a per-user basis #Match User anoncvs @@ -140,14 +140,14 @@ Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? # AllowTcpForwarding no # ForceCommand cvs server -<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> AllowUsers <%= s %> <% end -%> -<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> AllowGroups <%= s %> <%- end -%> -<% if scope.lookupvar('sshd::hardened') == 'yes' -%> +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> <% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> KexAlgorithms curve25519-sha256@libssh.org Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr @@ -158,7 +158,7 @@ MACs hmac-sha1 <% end -%> <% end -%> -<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> <%= s %> <% end -%> diff --git a/templates/sshd_config/OpenBSD.erb b/templates/sshd_config/OpenBSD.erb index cc1c2b9..db73030 100644 --- a/templates/sshd_config/OpenBSD.erb +++ b/templates/sshd_config/OpenBSD.erb @@ -8,11 +8,11 @@ # possible, but leave them commented. Uncommented options change a # default value. -<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> <%= s %> <% end -%> -<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> <% if port == 'off' -%> #Port -- disabled by puppet <% else -%> @@ -21,7 +21,7 @@ Port <%= port %> <% end -%> # Use these options to restrict which interfaces/protocols sshd will bind to -<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> ListenAddress <%= address %> <% end -%> #Protocol 2,1 @@ -45,39 +45,39 @@ ListenAddress <%= address %> # Authentication: #LoginGraceTime 2m -PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> -StrictModes <%= scope.lookupvar('sshd::strict_modes') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> #MaxAuthTries 6 -RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> -PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> -AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> # similar for protocol version 2 -HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files -IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %> +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> # To disable tunneled clear text passwords, change to no here! -PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> # To enable empty passwords, change to yes (NOT RECOMMENDED) -PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> # Change to no to disable s/key passwords -ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> # Kerberos options #KerberosAuthentication no @@ -89,13 +89,13 @@ ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_au #GSSAPIAuthentication no #GSSAPICleanupCredentials yes -AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> #GatewayPorts no -X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> #X11DisplayOffset 10 #X11UseLocalhost yes -PrintMotd <%= scope.lookupvar('sshd::print_motd') %> +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> #PrintLastLog yes #TCPKeepAlive yes #UseLogin no @@ -113,12 +113,12 @@ PrintMotd <%= scope.lookupvar('sshd::print_motd') %> #Banner /some/path # override default of no subsystems -Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/libexec/sftp-server' : s %> +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/libexec/sftp-server' : s %> -<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> AllowUsers <%= s %> <% end -%> -<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> AllowGroups <%= s %> <%- end -%> @@ -128,7 +128,7 @@ AllowGroups <%= s %> # AllowTcpForwarding no # ForceCommand cvs server -<% if scope.lookupvar('sshd::hardened') == 'yes' -%> +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> <% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> KexAlgorithms curve25519-sha256@libssh.org Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr @@ -139,6 +139,6 @@ MACs hmac-sha1 <% end -%> <% end -%> -<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> <%= s %> <% end -%> diff --git a/templates/sshd_config/Ubuntu.erb b/templates/sshd_config/Ubuntu.erb index 29c1bf9..c71e00b 100644 --- a/templates/sshd_config/Ubuntu.erb +++ b/templates/sshd_config/Ubuntu.erb @@ -3,12 +3,12 @@ # Package generated configuration file # See the sshd(8) manpage for details -<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> <%= s %> <% end -%> # What ports, IPs and protocols we listen for -<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> <% if port == 'off' -%> #Port -- disabled by puppet <% else -%> @@ -17,12 +17,12 @@ Port <%= port %> <% end -%> # Use these options to restrict which interfaces/protocols sshd will bind to -<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> ListenAddress <%= address %> <% end -%> Protocol 2 # HostKeys for protocol version 2 -<% scope.lookupvar('sshd::hostkey_type').to_a.each do |hostkey_type| -%> +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key <% end -%> @@ -39,47 +39,47 @@ LogLevel INFO # Authentication: LoginGraceTime 120 -PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> -StrictModes <%= scope.lookupvar('sshd::strict_modes') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> -RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> -PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> -AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> # Don't read the user's ~/.rhosts and ~/.shosts files -IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %> +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> # For this to work you will also need host keys in /etc/ssh_known_hosts -RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> # similar for protocol version 2 -HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) -PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) -ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> # To disable tunneled clear text passwords, change to no here! -PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> # Kerberos options -KerberosAuthentication <%= scope.lookupvar('sshd::kerberos_authentication') %> -KerberosOrLocalPasswd <%= scope.lookupvar('sshd::kerberos_orlocalpasswd') %> -KerberosTicketCleanup <%= scope.lookupvar('sshd::kerberos_ticketcleanup') %> +KerberosAuthentication <%= scope.lookupvar('::sshd::kerberos_authentication') %> +KerberosOrLocalPasswd <%= scope.lookupvar('::sshd::kerberos_orlocalpasswd') %> +KerberosTicketCleanup <%= scope.lookupvar('::sshd::kerberos_ticketcleanup') %> # GSSAPI options -GSSAPIAuthentication <%= scope.lookupvar('sshd::gssapi_authentication') %> -GSSAPICleanupCredentials <%= scope.lookupvar('sshd::gssapi_cleanupcredentials') %> +GSSAPIAuthentication <%= scope.lookupvar('::sshd::gssapi_authentication') %> +GSSAPICleanupCredentials <%= scope.lookupvar('::sshd::gssapi_cleanupcredentials') %> -X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> X11DisplayOffset 10 -PrintMotd <%= scope.lookupvar('sshd::print_motd') %> +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> PrintLastLog yes TCPKeepAlive yes @@ -91,7 +91,7 @@ TCPKeepAlive yes # Allow client to pass locale environment variables AcceptEnv LANG LC_* -Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will @@ -102,20 +102,20 @@ Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. -UsePAM <%= scope.lookupvar('sshd::use_pam') %> +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> -AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> -AllowAgentForwarding <%= scope.lookupvar('sshd::agent_forwarding') %> +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> -<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> AllowUsers <%= s %> <% end -%> -<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> AllowGroups <%= s %> <%- end -%> -<% if scope.lookupvar('sshd::hardened') == 'yes' -%> +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> <% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> KexAlgorithms curve25519-sha256@libssh.org Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr @@ -126,6 +126,6 @@ MACs hmac-sha1 <% end -%> <% end -%> -<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> <%= s %> <% end -%> diff --git a/templates/sshd_config/Ubuntu_lucid.erb b/templates/sshd_config/Ubuntu_lucid.erb index 550243f..7544f00 100644 --- a/templates/sshd_config/Ubuntu_lucid.erb +++ b/templates/sshd_config/Ubuntu_lucid.erb @@ -1,12 +1,12 @@ # Package generated configuration file # See the sshd(8) manpage for details -<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%> <%= s %> <% end -%> # What ports, IPs and protocols we listen for -<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> +<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%> <% if port == 'off' -%> #Port -- disabled by puppet <% else -%> @@ -15,12 +15,12 @@ Port <%= port %> <% end -%> # Use these options to restrict which interfaces/protocols sshd will bind to -<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> +<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%> ListenAddress <%= address %> <% end -%> Protocol 2 # HostKeys for protocol version 2 -<% scope.lookupvar('sshd::hostkey_type').to_a.each do |hostkey_type| -%> +<% scope.lookupvar('::sshd::hostkey_type').to_a.each do |hostkey_type| -%> HostKey /etc/ssh/ssh_host_<%=hostkey_type %>_key <% end -%> @@ -41,36 +41,36 @@ LogLevel INFO # Authentication: LoginGraceTime 600 -PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> +PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %> -StrictModes <%= scope.lookupvar('sshd::strict_modes') %> +StrictModes <%= scope.lookupvar('::sshd::strict_modes') %> -RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> +RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %> -PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %> -AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> +AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %> # For this to work you will also need host keys in /etc/ssh_known_hosts -RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> +RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %> # Don't read the user's ~/.rhosts and ~/.shosts files -IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %> +IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %> # similar for protocol version 2 -HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> +HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %> # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) -PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> +PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %> # Change to no to disable s/key passwords -ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> +ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %> # To disable tunneled clear text passwords, change to no here! -PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> +PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %> # To change Kerberos options #KerberosAuthentication no @@ -81,7 +81,7 @@ PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> # Kerberos TGT Passing does only work with the AFS kaserver #KerberosTgtPassing yes -X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> +X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %> X11DisplayOffset 10 KeepAlive yes #UseLogin no @@ -90,7 +90,7 @@ KeepAlive yes #Banner /etc/issue.net #ReverseMappingCheck yes -Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> +Subsystem sftp <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/openssh/sftp-server' : s %> # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will @@ -101,24 +101,24 @@ Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. -UsePAM <%= scope.lookupvar('sshd::use_pam') %> +UsePAM <%= scope.lookupvar('::sshd::use_pam') %> HostbasedUsesNameFromPacketOnly yes -AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> +AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %> -AllowAgentForwarding <%= scope.lookupvar('sshd::agent_forwarding') %> +AllowAgentForwarding <%= scope.lookupvar('::sshd::agent_forwarding') %> -<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%> AllowUsers <%= s %> <% end -%> -<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%> AllowGroups <%= s %> <%- end -%> -PrintMotd <%= scope.lookupvar('sshd::print_motd') %> +PrintMotd <%= scope.lookupvar('::sshd::print_motd') %> -<% if scope.lookupvar('sshd::hardened') == 'yes' -%> +<% if scope.lookupvar('::sshd::hardened') == 'yes' -%> <% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%> KexAlgorithms curve25519-sha256@libssh.org Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr @@ -129,6 +129,6 @@ MACs hmac-sha1 <% end -%> <% end -%> -<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> +<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%> <%= s %> <% end -%> -- cgit v1.2.3