From 1f6f5689309ff1d7b57cdc3306de59d1de36af39 Mon Sep 17 00:00:00 2001 From: mh Date: Fri, 15 Aug 2014 10:22:40 +0200 Subject: move to os release number on centos for selection --- templates/sshd_config/CentOS.erb | 166 ------------------------------ templates/sshd_config/CentOS_5.erb | 1 + templates/sshd_config/CentOS_6.erb | 166 ++++++++++++++++++++++++++++++ templates/sshd_config/CentOS_7.erb | 180 +++++++++++++++++++++++++++++++++ templates/sshd_config/CentOS_Final.erb | 1 - 5 files changed, 347 insertions(+), 167 deletions(-) delete mode 100644 templates/sshd_config/CentOS.erb create mode 120000 templates/sshd_config/CentOS_5.erb create mode 100644 templates/sshd_config/CentOS_6.erb create mode 100644 templates/sshd_config/CentOS_7.erb delete mode 120000 templates/sshd_config/CentOS_Final.erb (limited to 'templates/sshd_config') diff --git a/templates/sshd_config/CentOS.erb b/templates/sshd_config/CentOS.erb deleted file mode 100644 index 47cb077..0000000 --- a/templates/sshd_config/CentOS.erb +++ /dev/null @@ -1,166 +0,0 @@ -# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ - -# This is the sshd server system-wide configuration file. See -# sshd_config(5) for more information. - -# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin - -# The strategy used for options in the default sshd_config shipped with -# OpenSSH is to specify options with their default value where -# possible, but leave them commented. Uncommented options change a -# default value. - -<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> -<%= s %> -<% end -%> - -<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> -<% if port == 'off' -%> -#Port -- disabled by puppet -<% else -%> -Port <%= port %> -<% end -%> -<% end -%> - -# Use these options to restrict which interfaces/protocols sshd will bind to -<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> -ListenAddress <%= address %> -<% end -%> - -# Disable legacy (protocol version 1) support in the server for new -# installations. In future the default will change to require explicit -# activation of protocol 1 -Protocol 2 - -# HostKey for protocol version 1 -#HostKey /etc/ssh/ssh_host_key -# HostKeys for protocol version 2 -#HostKey /etc/ssh/ssh_host_rsa_key -#HostKey /etc/ssh/ssh_host_dsa_key - -# Lifetime and size of ephemeral version 1 server key -#KeyRegenerationInterval 1h -#ServerKeyBits 1024 - -# Logging -# obsoletes QuietMode and FascistLogging -#SyslogFacility AUTH -SyslogFacility AUTHPRIV -#LogLevel INFO - -# Authentication: - -#LoginGraceTime 2m -PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> - -StrictModes <%= scope.lookupvar('sshd::strict_modes') %> - -#MaxAuthTries 6 - -RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> -PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> -AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> -#AuthorizedKeysCommand none -#AuthorizedKeysCommandRunAs nobody - -# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts -RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> - -# similar for protocol version 2 -HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> - -# Change to yes if you don't trust ~/.ssh/known_hosts for -# RhostsRSAAuthentication and HostbasedAuthentication -#IgnoreUserKnownHosts no - -# Don't read the user's ~/.rhosts and ~/.shosts files -IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %> - -# To disable tunneled clear text passwords, change to no here! -PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> - -# To enable empty passwords, change to yes (NOT RECOMMENDED) -PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> - -# Change to no to disable s/key passwords -ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> - -# Kerberos options -#KerberosAuthentication no -#KerberosOrLocalPasswd yes -#KerberosTicketCleanup yes -#KerberosGetAFSToken no -#KerberosUseKuserok yes - -# GSSAPI options -#GSSAPIAuthentication no -#GSSAPICleanupCredentials yes - -# Set this to 'yes' to enable PAM authentication, account processing, -# and session processing. If this is enabled, PAM authentication will -# be allowed through the ChallengeResponseAuthentication and -# PasswordAuthentication. Depending on your PAM configuration, -# PAM authentication via ChallengeResponseAuthentication may bypass -# the setting of "PermitRootLogin without-password". -# If you just want the PAM account and session checks to run without -# PAM authentication, then enable this but set PasswordAuthentication -# and ChallengeResponseAuthentication to 'no'. -#UsePAM no -UsePAM <%= scope.lookupvar('sshd::use_pam') %> - -# Accept locale-related environment variables -AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES -AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT -AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE -AcceptEnv XMODIFIERS - -#AllowAgentForwarding yes -AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> -#GatewayPorts no -#X11Forwarding no -X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> -#X11DisplayOffset 10 -#X11UseLocalhost yes -PrintMotd <%= scope.lookupvar('sshd::print_motd') %> -#PrintLastLog yes -#TCPKeepAlive yes -#UseLogin no -#UsePrivilegeSeparation yes -#PermitUserEnvironment no -#Compression delayed -#ClientAliveInterval 0 -#ClientAliveCountMax 3 -#ShowPatchLevel no -#UseDNS yes -#PidFile /var/run/sshd.pid -#MaxStartups 10:30:100 -#PermitTunnel no -#ChrootDirectory none - -# no default banner path -#Banner /some/path - -# override default of no subsystems -Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/libexec/openssh/sftp-server' : s %> - -<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> -AllowUsers <%= s %> -<% end -%> -<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> -AllowGroups <%= s %> -<%- end -%> - -<% if scope.lookupvar('sshd::hardened_ssl') == 'yes' -%> -Ciphers aes256-ctr -MACs hmac-sha1 -<% end -%> - -# Example of overriding settings on a per-user basis -#Match User anoncvs -# X11Forwarding no -# AllowTcpForwarding no -# ForceCommand cvs server -# -<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> -<%= s %> -<% end -%> diff --git a/templates/sshd_config/CentOS_5.erb b/templates/sshd_config/CentOS_5.erb new file mode 120000 index 0000000..71b767a --- /dev/null +++ b/templates/sshd_config/CentOS_5.erb @@ -0,0 +1 @@ +CentOS_6.erb \ No newline at end of file diff --git a/templates/sshd_config/CentOS_6.erb b/templates/sshd_config/CentOS_6.erb new file mode 100644 index 0000000..47cb077 --- /dev/null +++ b/templates/sshd_config/CentOS_6.erb @@ -0,0 +1,166 @@ +# $OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $ + +# This is the sshd server system-wide configuration file. See +# sshd_config(5) for more information. + +# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin + +# The strategy used for options in the default sshd_config shipped with +# OpenSSH is to specify options with their default value where +# possible, but leave them commented. Uncommented options change a +# default value. + +<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> +<%= s %> +<% end -%> + +<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> +<% if port == 'off' -%> +#Port -- disabled by puppet +<% else -%> +Port <%= port %> +<% end -%> +<% end -%> + +# Use these options to restrict which interfaces/protocols sshd will bind to +<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> +ListenAddress <%= address %> +<% end -%> + +# Disable legacy (protocol version 1) support in the server for new +# installations. In future the default will change to require explicit +# activation of protocol 1 +Protocol 2 + +# HostKey for protocol version 1 +#HostKey /etc/ssh/ssh_host_key +# HostKeys for protocol version 2 +#HostKey /etc/ssh/ssh_host_rsa_key +#HostKey /etc/ssh/ssh_host_dsa_key + +# Lifetime and size of ephemeral version 1 server key +#KeyRegenerationInterval 1h +#ServerKeyBits 1024 + +# Logging +# obsoletes QuietMode and FascistLogging +#SyslogFacility AUTH +SyslogFacility AUTHPRIV +#LogLevel INFO + +# Authentication: + +#LoginGraceTime 2m +PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> + +StrictModes <%= scope.lookupvar('sshd::strict_modes') %> + +#MaxAuthTries 6 + +RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> +AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> +#AuthorizedKeysCommand none +#AuthorizedKeysCommandRunAs nobody + +# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts +RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> + +# similar for protocol version 2 +HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> + +# Change to yes if you don't trust ~/.ssh/known_hosts for +# RhostsRSAAuthentication and HostbasedAuthentication +#IgnoreUserKnownHosts no + +# Don't read the user's ~/.rhosts and ~/.shosts files +IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %> + +# To disable tunneled clear text passwords, change to no here! +PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> + +# To enable empty passwords, change to yes (NOT RECOMMENDED) +PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> + +# Change to no to disable s/key passwords +ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> + +# Kerberos options +#KerberosAuthentication no +#KerberosOrLocalPasswd yes +#KerberosTicketCleanup yes +#KerberosGetAFSToken no +#KerberosUseKuserok yes + +# GSSAPI options +#GSSAPIAuthentication no +#GSSAPICleanupCredentials yes + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +#UsePAM no +UsePAM <%= scope.lookupvar('sshd::use_pam') %> + +# Accept locale-related environment variables +AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES +AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT +AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE +AcceptEnv XMODIFIERS + +#AllowAgentForwarding yes +AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> +#GatewayPorts no +#X11Forwarding no +X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> +#X11DisplayOffset 10 +#X11UseLocalhost yes +PrintMotd <%= scope.lookupvar('sshd::print_motd') %> +#PrintLastLog yes +#TCPKeepAlive yes +#UseLogin no +#UsePrivilegeSeparation yes +#PermitUserEnvironment no +#Compression delayed +#ClientAliveInterval 0 +#ClientAliveCountMax 3 +#ShowPatchLevel no +#UseDNS yes +#PidFile /var/run/sshd.pid +#MaxStartups 10:30:100 +#PermitTunnel no +#ChrootDirectory none + +# no default banner path +#Banner /some/path + +# override default of no subsystems +Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/libexec/openssh/sftp-server' : s %> + +<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> +AllowUsers <%= s %> +<% end -%> +<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> +AllowGroups <%= s %> +<%- end -%> + +<% if scope.lookupvar('sshd::hardened_ssl') == 'yes' -%> +Ciphers aes256-ctr +MACs hmac-sha1 +<% end -%> + +# Example of overriding settings on a per-user basis +#Match User anoncvs +# X11Forwarding no +# AllowTcpForwarding no +# ForceCommand cvs server +# +<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> +<%= s %> +<% end -%> diff --git a/templates/sshd_config/CentOS_7.erb b/templates/sshd_config/CentOS_7.erb new file mode 100644 index 0000000..1a2e339 --- /dev/null +++ b/templates/sshd_config/CentOS_7.erb @@ -0,0 +1,180 @@ +# $OpenBSD: sshd_config,v 1.90 2013/05/16 04:09:14 dtucker Exp $ + +# This is the sshd server system-wide configuration file. See +# sshd_config(5) for more information. + +# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin + +# The strategy used for options in the default sshd_config shipped with +# OpenSSH is to specify options with their default value where +# possible, but leave them commented. Uncommented options change a +# default value. + +<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%> +<%= s %> +<% end -%> + +# If you want to change the port on a SELinux system, you have to tell +# SELinux about this change. +# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER +# +<% scope.lookupvar('sshd::ports').to_a.each do |port| -%> +<% if port == 'off' -%> +#Port -- disabled by puppet +<% else -%> +Port <%= port %> +<% end -%> +<% end -%> +<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%> +ListenAddress <%= address %> +<% end -%> + +# The default requires explicit activation of protocol 1 +#Protocol 2 + +# HostKey for protocol version 1 +#HostKey /etc/ssh/ssh_host_key +# HostKeys for protocol version 2 +HostKey /etc/ssh/ssh_host_rsa_key +#HostKey /etc/ssh/ssh_host_dsa_key +HostKey /etc/ssh/ssh_host_ecdsa_key + +# Lifetime and size of ephemeral version 1 server key +#KeyRegenerationInterval 1h +#ServerKeyBits 1024 + +# Ciphers and keying +#RekeyLimit default none + +# Logging +# obsoletes QuietMode and FascistLogging +#SyslogFacility AUTH +SyslogFacility AUTHPRIV +#LogLevel INFO + +# Authentication: + +#LoginGraceTime 2m +PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %> +StrictModes <%= scope.lookupvar('sshd::strict_modes') %> +#MaxAuthTries 6 +#MaxSessions 10 + +RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %> +PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %> +AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %> +#AuthorizedPrincipalsFile none +#AuthorizedKeysCommand none +#AuthorizedKeysCommandRunAs nobody + +# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts +RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %> + +# similar for protocol version 2 +HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %> + +# Change to yes if you don't trust ~/.ssh/known_hosts for +# RhostsRSAAuthentication and HostbasedAuthentication +#IgnoreUserKnownHosts no + +# Don't read the user's ~/.rhosts and ~/.shosts files +IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %> + +# To disable tunneled clear text passwords, change to no here! +PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %> + +# To enable empty passwords, change to yes (NOT RECOMMENDED) +PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %> + +# Change to no to disable s/key passwords +ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %> + +# Kerberos options +#KerberosAuthentication no +#KerberosOrLocalPasswd yes +#KerberosTicketCleanup yes +#KerberosGetAFSToken no +#KerberosUseKuserok yes + +# GSSAPI options +GSSAPIAuthentication no +GSSAPICleanupCredentials yes +#GSSAPIStrictAcceptorCheck yes +#GSSAPIKeyExchange no + +# Set this to 'yes' to enable PAM authentication, account processing, +# and session processing. If this is enabled, PAM authentication will +# be allowed through the ChallengeResponseAuthentication and +# PasswordAuthentication. Depending on your PAM configuration, +# PAM authentication via ChallengeResponseAuthentication may bypass +# the setting of "PermitRootLogin without-password". +# If you just want the PAM account and session checks to run without +# PAM authentication, then enable this but set PasswordAuthentication +# and ChallengeResponseAuthentication to 'no'. +# WARNING: 'UsePAM no' is not supported in Red Hat Enterprise Linux and may cause several +# problems. +#UsePAM no +UsePAM <%= scope.lookupvar('sshd::use_pam') %> + +#AllowAgentForwarding yes +AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %> +#GatewayPorts no +#X11Forwarding no +X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %> +#X11DisplayOffset 10 +#X11UseLocalhost yes +PrintMotd <%= scope.lookupvar('sshd::print_motd') %> +#PrintLastLog yes +#TCPKeepAlive yes +#UseLogin no +UsePrivilegeSeparation sandbox # Default for new installations. +#PermitUserEnvironment no +#Compression delayed +#ClientAliveInterval 0 +#ClientAliveCountMax 3 +#ShowPatchLevel no +#UseDNS yes +#PidFile /var/run/sshd.pid +#MaxStartups 10:30:100 +#PermitTunnel no +#ChrootDirectory none +#VersionAddendum none + +# no default banner path +#Banner none + +# Accept locale-related environment variables +AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES +AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT +AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE +AcceptEnv XMODIFIERS + + +# override default of no subsystems +Subsystem sftp <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/libexec/openssh/sftp-server' : s %> + +<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%> +AllowUsers <%= s %> +<% end -%> +<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%> +AllowGroups <%= s %> +<%- end -%> + +# Uncomment this if you want to use .local domain +#Host *.local +# CheckHostIP no + +<% if scope.lookupvar('sshd::hardened_ssl') == 'yes' -%> +Ciphers aes256-ctr +MACs hmac-sha1 +<% end -%> + +# Example of overriding settings on a per-user basis +#Match User anoncvs +# X11Forwarding no +# AllowTcpForwarding no +# ForceCommand cvs server + +<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%> +<%= s %> +<% end -%> diff --git a/templates/sshd_config/CentOS_Final.erb b/templates/sshd_config/CentOS_Final.erb deleted file mode 120000 index 03246aa..0000000 --- a/templates/sshd_config/CentOS_Final.erb +++ /dev/null @@ -1 +0,0 @@ -CentOS.erb \ No newline at end of file -- cgit v1.2.3