Merge branch 'fix_lookupvar' into 'master'

Adjust variable lookup in templates to silence deprecation warnings, fixes #1

See merge request !12

1 files changed, 23 insertions, 23 deletions

diff --git a/templates/sshd_config/Gentoo.erb b/templates/sshd_config/Gentoo.erb
index ac6ae51..022a26e 100644
--- a/templates/sshd_config/Gentoo.erb
+++ b/templates/sshd_config/Gentoo.erb
@@ -10,11 +10,11 @@
 # possible, but leave them commented.  Uncommented options change a
 # default value.
 
-<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%>
+<% unless (s=scope.lookupvar('::sshd::head_additional_options')).empty? -%>
 <%= s %>
 <% end -%>
 
-<% scope.lookupvar('sshd::ports').to_a.each do |port| -%>
+<% scope.lookupvar('::sshd::ports').to_a.each do |port| -%>
 <% if port == 'off' -%>
 #Port -- disabled by puppet
 <% else -%>
@@ -23,7 +23,7 @@ Port <%= port %>
 <% end -%>
 
 # Use these options to restrict which interfaces/protocols sshd will bind to
-<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%>
+<% scope.lookupvar('::sshd::listen_address').to_a.each do |address| -%>
 ListenAddress <%= address %>
 <% end -%>
 #AddressFamily any
@@ -51,39 +51,39 @@ Protocol 2
 # Authentication:
 
 #LoginGraceTime 2m
-PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %>
+PermitRootLogin <%= scope.lookupvar('::sshd::permit_root_login') %>
 
-StrictModes <%= scope.lookupvar('sshd::strict_modes') %>
+StrictModes <%= scope.lookupvar('::sshd::strict_modes') %>
 
 #MaxAuthTries 6
 
-RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %>
+RSAAuthentication <%= scope.lookupvar('::sshd::rsa_authentication') %>
 
-PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %>
+PubkeyAuthentication <%= scope.lookupvar('::sshd::pubkey_authentication') %>
 
-AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %>
+AuthorizedKeysFile <%= scope.lookupvar('::sshd::authorized_keys_file') %>
 
 # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %>
+RhostsRSAAuthentication <%= scope.lookupvar('::sshd::rhosts_rsa_authentication') %>
 
 # similar for protocol version 2
-HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %>
+HostbasedAuthentication <%= scope.lookupvar('::sshd::hostbased_authentication') %>
 
 # Change to yes if you don't trust ~/.ssh/known_hosts for
 # RhostsRSAAuthentication and HostbasedAuthentication
 #IgnoreUserKnownHosts no
 
 # Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %>
+IgnoreRhosts <%= scope.lookupvar('::sshd::ignore_rhosts') %>
 
 # To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %>
+PasswordAuthentication <%= scope.lookupvar('::sshd::password_authentication') %>
 
 # To enable empty passwords, change to yes (NOT RECOMMENDED)
-PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %>
+PermitEmptyPasswords <%= scope.lookupvar('::sshd::permit_empty_passwords') %>
 
 # Change to no to disable s/key passwords
-ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %>
+ChallengeResponseAuthentication <%= scope.lookupvar('::sshd::challenge_response_authentication') %>
 
 # Kerberos options
 #KerberosAuthentication no
@@ -106,15 +106,15 @@ ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_au
 # If you just want the PAM account and session checks to run without
 # PAM authentication, then enable this but set PasswordAuthentication
 # and ChallengeResponseAuthentication to 'no'.
-UsePAM <%= scope.lookupvar('sshd::use_pam') %>
+UsePAM <%= scope.lookupvar('::sshd::use_pam') %>
 
-AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %>
+AllowTcpForwarding <%= scope.lookupvar('::sshd::tcp_forwarding') %>
 
 #GatewayPorts no
-X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %>
+X11Forwarding <%= scope.lookupvar('::sshd::x11_forwarding') %>
 #X11DisplayOffset 10
 #X11UseLocalhost yes
-PrintMotd <%= scope.lookupvar('sshd::print_motd') %>
+PrintMotd <%= scope.lookupvar('::sshd::print_motd') %>
 #PrintLastLog yes
 #TCPKeepAlive yes
 #UseLogin no
@@ -132,7 +132,7 @@ PrintMotd <%= scope.lookupvar('sshd::print_motd') %>
 #Banner /some/path
 
 # override default of no subsystems
-Subsystem      sftp    <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/lib/misc/sftp-server' : s %>
+Subsystem      sftp    <%= (s=scope.lookupvar('::sshd::sftp_subsystem')).empty? ? '/usr/lib/misc/sftp-server' : s %>
 
 # Example of overriding settings on a per-user basis
 #Match User anoncvs
@@ -140,14 +140,14 @@ Subsystem      sftp    <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ?
 #	AllowTcpForwarding no
 #	ForceCommand cvs server
 
-<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%>
+<% unless (s=scope.lookupvar('::sshd::allowed_users')).empty? -%>
 AllowUsers <%= s %>
 <% end -%>
-<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%>
+<% unless (s=scope.lookupvar('::sshd::allowed_groups')).empty? -%>
 AllowGroups <%= s %>
 <%- end -%>
 
-<% if scope.lookupvar('sshd::hardened') == 'yes' -%>
+<% if scope.lookupvar('::sshd::hardened') == 'yes' -%>
 <% if (scope.function_versioncmp([scope.lookupvar('::ssh_version'),'6.5'])) >= 0 -%>
 KexAlgorithms curve25519-sha256@libssh.org
 Ciphers chacha20-poly1305@openssh.com,aes256-gcm@openssh.com,aes256-ctr
@@ -158,7 +158,7 @@ MACs hmac-sha1
 <% end -%>
 <% end -%>
 
-<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%>
+<% unless (s=scope.lookupvar('::sshd::tail_additional_options')).empty? -%>
 <%= s %>
 <% end -%>