move to os release number on centos for selection

1 files changed, 0 insertions, 166 deletions

diff --git a/templates/sshd_config/CentOS.erb b/templates/sshd_config/CentOS.erb
deleted file mode 100644
index 47cb077..0000000
--- a/templates/sshd_config/CentOS.erb
+++ /dev/null
@@ -1,166 +0,0 @@
-#	$OpenBSD: sshd_config,v 1.73 2005/12/06 22:38:28 reyk Exp $
-
-# This is the sshd server system-wide configuration file.  See
-# sshd_config(5) for more information.
-
-# This sshd was compiled with PATH=/usr/local/bin:/bin:/usr/bin
-
-# The strategy used for options in the default sshd_config shipped with
-# OpenSSH is to specify options with their default value where
-# possible, but leave them commented.  Uncommented options change a
-# default value.
-
-<% unless (s=scope.lookupvar('sshd::head_additional_options')).empty? -%>
-<%= s %>
-<% end -%>
-
-<% scope.lookupvar('sshd::ports').to_a.each do |port| -%>
-<% if port == 'off' -%>
-#Port -- disabled by puppet
-<% else -%>
-Port <%= port %>
-<% end -%>
-<% end -%>
-
-# Use these options to restrict which interfaces/protocols sshd will bind to
-<% scope.lookupvar('sshd::listen_address').to_a.each do |address| -%>
-ListenAddress <%= address %>
-<% end -%>
-
-# Disable legacy (protocol version 1) support in the server for new
-# installations. In future the default will change to require explicit
-# activation of protocol 1
-Protocol 2
-
-# HostKey for protocol version 1
-#HostKey /etc/ssh/ssh_host_key
-# HostKeys for protocol version 2
-#HostKey /etc/ssh/ssh_host_rsa_key
-#HostKey /etc/ssh/ssh_host_dsa_key
-
-# Lifetime and size of ephemeral version 1 server key
-#KeyRegenerationInterval 1h
-#ServerKeyBits 1024
-
-# Logging
-# obsoletes QuietMode and FascistLogging
-#SyslogFacility AUTH
-SyslogFacility AUTHPRIV
-#LogLevel INFO
-
-# Authentication:
-
-#LoginGraceTime 2m
-PermitRootLogin <%= scope.lookupvar('sshd::permit_root_login') %>
-
-StrictModes <%= scope.lookupvar('sshd::strict_modes') %>
-
-#MaxAuthTries 6
-
-RSAAuthentication <%= scope.lookupvar('sshd::rsa_authentication') %>
-PubkeyAuthentication <%= scope.lookupvar('sshd::pubkey_authentication') %>
-AuthorizedKeysFile <%= scope.lookupvar('sshd::authorized_keys_file') %>
-#AuthorizedKeysCommand none
-#AuthorizedKeysCommandRunAs nobody
-
-# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
-RhostsRSAAuthentication <%= scope.lookupvar('sshd::rhosts_rsa_authentication') %>
-
-# similar for protocol version 2
-HostbasedAuthentication <%= scope.lookupvar('sshd::hostbased_authentication') %>
-
-# Change to yes if you don't trust ~/.ssh/known_hosts for
-# RhostsRSAAuthentication and HostbasedAuthentication
-#IgnoreUserKnownHosts no
-
-# Don't read the user's ~/.rhosts and ~/.shosts files
-IgnoreRhosts <%= scope.lookupvar('sshd::ignore_rhosts') %>
-
-# To disable tunneled clear text passwords, change to no here!
-PasswordAuthentication <%= scope.lookupvar('sshd::password_authentication') %>
-
-# To enable empty passwords, change to yes (NOT RECOMMENDED)
-PermitEmptyPasswords <%= scope.lookupvar('sshd::permit_empty_passwords') %>
-
-# Change to no to disable s/key passwords
-ChallengeResponseAuthentication <%= scope.lookupvar('sshd::challenge_response_authentication') %>
-
-# Kerberos options
-#KerberosAuthentication no
-#KerberosOrLocalPasswd yes
-#KerberosTicketCleanup yes
-#KerberosGetAFSToken no
-#KerberosUseKuserok yes
-
-# GSSAPI options
-#GSSAPIAuthentication no
-#GSSAPICleanupCredentials yes
-
-# Set this to 'yes' to enable PAM authentication, account processing, 
-# and session processing. If this is enabled, PAM authentication will 
-# be allowed through the ChallengeResponseAuthentication and
-# PasswordAuthentication.  Depending on your PAM configuration,
-# PAM authentication via ChallengeResponseAuthentication may bypass
-# the setting of "PermitRootLogin without-password".
-# If you just want the PAM account and session checks to run without
-# PAM authentication, then enable this but set PasswordAuthentication
-# and ChallengeResponseAuthentication to 'no'.
-#UsePAM no
-UsePAM <%= scope.lookupvar('sshd::use_pam') %>
-
-# Accept locale-related environment variables
-AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
-AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
-AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
-AcceptEnv XMODIFIERS
-
-#AllowAgentForwarding yes
-AllowTcpForwarding <%= scope.lookupvar('sshd::tcp_forwarding') %>
-#GatewayPorts no
-#X11Forwarding no
-X11Forwarding <%= scope.lookupvar('sshd::x11_forwarding') %>
-#X11DisplayOffset 10
-#X11UseLocalhost yes
-PrintMotd <%= scope.lookupvar('sshd::print_motd') %>
-#PrintLastLog yes
-#TCPKeepAlive yes
-#UseLogin no
-#UsePrivilegeSeparation yes
-#PermitUserEnvironment no
-#Compression delayed
-#ClientAliveInterval 0
-#ClientAliveCountMax 3
-#ShowPatchLevel no
-#UseDNS yes
-#PidFile /var/run/sshd.pid
-#MaxStartups 10:30:100
-#PermitTunnel no
-#ChrootDirectory none
-
-# no default banner path
-#Banner /some/path
-
-# override default of no subsystems
-Subsystem      sftp    <%= (s=scope.lookupvar('sshd::sftp_subsystem')).empty? ? '/usr/libexec/openssh/sftp-server' : s %> 
-
-<% unless (s=scope.lookupvar('sshd::allowed_users')).empty? -%>
-AllowUsers <%= s %>
-<% end -%>
-<% unless (s=scope.lookupvar('sshd::allowed_groups')).empty? -%>
-AllowGroups <%= s %>
-<%- end -%>
-
-<% if scope.lookupvar('sshd::hardened_ssl') == 'yes' -%>
-Ciphers aes256-ctr
-MACs hmac-sha1
-<% end -%>
-
-# Example of overriding settings on a per-user basis
-#Match User anoncvs
-#      X11Forwarding no
-#      AllowTcpForwarding no
-#      ForceCommand cvs server
-#
-<% unless (s=scope.lookupvar('sshd::tail_additional_options')).empty? -%>
-<%= s %>
-<% end -%>