Adding Ubuntu_lucid.erb

1 files changed, 192 insertions, 0 deletions

diff --git a/templates/sshd_config/Ubuntu_lucid.erb b/templates/sshd_config/Ubuntu_lucid.erb
new file mode 100644
index 0000000..5f7afb4
--- /dev/null
+++ b/templates/sshd_config/Ubuntu_lucid.erb
@@ -0,0 +1,192 @@
+# Package generated configuration file
+# See the sshd(8) manpage for details
+
+<%- unless sshd_head_additional_options.to_s.empty? then %>
+<%= sshd_head_additional_options %>
+<%- end %>
+
+# What ports, IPs and protocols we listen for
+<%- unless sshd_port.to_s.empty? then -%>
+<%- if sshd_port.to_s == 'off' then -%>
+#Port -- disabled by puppet
+<% else -%>
+Port <%= sshd_port -%>
+<% end -%>
+<%- else -%>
+Port 22
+<%- end -%>
+
+# Use these options to restrict which interfaces/protocols sshd will bind to
+<% for address in sshd_listen_address -%>
+ListenAddress <%= address %>
+<% end -%>
+Protocol 2
+# HostKeys for protocol version 2
+HostKey /etc/ssh/ssh_host_rsa_key
+HostKey /etc/ssh/ssh_host_dsa_key
+#Privilege Separation is turned on for security
+UsePrivilegeSeparation yes
+
+# ...but breaks Pam auth via kbdint, so we have to turn it off
+# Use PAM authentication via keyboard-interactive so PAM modules can
+# properly interface with the user (off due to PrivSep)
+#PAMAuthenticationViaKbdInt no
+# Lifetime and size of ephemeral version 1 server key
+KeyRegenerationInterval 3600
+ServerKeyBits 768
+
+# Logging
+SyslogFacility AUTH
+LogLevel INFO
+
+# Authentication:
+LoginGraceTime 600
+<%- unless sshd_permit_root_login.to_s.empty? then -%>
+PermitRootLogin <%= sshd_permit_root_login -%>
+<%- else -%>
+PermitRootLogin without-password
+<%- end -%>
+
+<%- if sshd_strict_modes.to_s == 'yes' then -%>
+StrictModes yes
+<%- else -%>
+StrictModes no
+<%- end -%>
+
+<%- if sshd_rsa_authentication.to_s == 'yes' then -%>
+RSAAuthentication yes
+<%- else -%>
+RSAAuthentication no
+<%- end -%>
+
+<%- if sshd_pubkey_authentication.to_s == 'yes' then -%>
+PubkeyAuthentication yes
+<%- else -%>
+PubkeyAuthentication no
+<%- end -%>
+
+<%- unless sshd_authorized_keys_file.to_s.empty? then -%>
+AuthorizedKeysFile <%= sshd_authorized_keys_file %>
+<%- else -%>
+AuthorizedKeysFile %h/.ssh/authorized_keys
+<%- end -%>
+
+# For this to work you will also need host keys in /etc/ssh_known_hosts
+<%- if sshd_rhosts_rsa_authentication.to_s == 'yes' then -%>
+RhostsRSAAuthentication yes
+<%- else -%>
+RhostsRSAAuthentication no
+<% end -%>
+
+# Don't read the user's ~/.rhosts and ~/.shosts files
+<%- if sshd_ignore_rhosts.to_s == 'yes' then -%>
+IgnoreRhosts yes
+<%- else -%>
+IgnoreRhosts no
+<% end -%>
+
+# similar for protocol version 2
+<%- if sshd_hostbased_authentication.to_s == 'yes' then -%>
+HostbasedAuthentication yes
+<%- else -%>
+HostbasedAuthentication no
+<% end -%>
+
+# Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication
+#IgnoreUserKnownHosts yes
+
+# To enable empty passwords, change to yes (NOT RECOMMENDED)
+<%- if sshd_permit_empty_passwords.to_s == 'yes' then -%>
+PermitEmptyPasswords yes
+<% else -%>
+PermitEmptyPasswords no
+<% end -%>
+
+# Change to no to disable s/key passwords
+<%- if sshd_challenge_response_authentication.to_s == 'yes' then -%>
+ChallengeResponseAuthentication yes
+<%- else -%>
+ChallengeResponseAuthentication no
+<%- end -%>
+
+# To disable tunneled clear text passwords, change to no here!
+<%- if sshd_password_authentication.to_s == 'yes' then -%>
+PasswordAuthentication yes
+<%- else -%>
+PasswordAuthentication no
+<%- end -%>
+
+# To change Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#AFSTokenPassing no
+#KerberosTicketCleanup no
+
+# Kerberos TGT Passing does only work with the AFS kaserver
+#KerberosTgtPassing yes
+
+<%- if sshd_x11_forwarding.to_s == 'yes' then -%>
+X11Forwarding yes
+<%- else -%>
+X11Forwarding no
+<%- end -%>
+X11DisplayOffset 10
+KeepAlive yes
+#UseLogin no
+
+#MaxStartups 10:30:60
+#Banner /etc/issue.net
+#ReverseMappingCheck yes
+
+<%- if sshd_sftp_subsystem.to_s.empty? then %>
+Subsystem	sftp	/usr/lib/openssh/sftp-server
+<%- else %>
+Subsystem      sftp    <%= sshd_sftp_subsystem %>
+<%- end %>
+
+# Set this to 'yes' to enable PAM authentication, account processing, 
+# and session processing. If this is enabled, PAM authentication will 
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+<%- if sshd_use_pam.to_s == 'yes' then -%>
+UsePAM yes
+<%- else -%>
+UsePAM no
+<%- end -%>
+
+HostbasedUsesNameFromPacketOnly yes
+
+<%- if sshd_tcp_forwarding.to_s == 'yes' then -%>
+AllowTcpForwarding yes
+<%- else -%>
+AllowTcpForwarding no
+<%- end -%>
+
+<%- if sshd_agent_forwarding.to_s == 'yes' then -%>
+AllowAgentForwarding yes
+<%- else -%>
+AllowAgentForwarding no
+<%- end -%>
+
+ChallengeResponseAuthentication no
+
+<%- unless sshd_allowed_users.to_s.empty? then -%>
+AllowUsers <%= sshd_allowed_users -%>
+<%- end -%>
+<%- unless sshd_allowed_groups.to_s.empty? then %>
+AllowGroups <%= sshd_allowed_groups %>
+<%- end %>
+
+<%- if sshd_print_motd.to_s == 'no' then -%>
+PrintMotd no
+<%- end -%>
+
+<%- unless sshd_tail_additional_options.to_s.empty? then %>
+<%= sshd_tail_additional_options %>
+<%- end %>
+