From ef36071860a87c41cc3f930bedf4a6f6efc8cab5 Mon Sep 17 00:00:00 2001 From: varac Date: Fri, 14 Aug 2015 12:00:20 +0200 Subject: renamed README -> README.md --- README | 213 -------------------------------------------------------------- README.md | 213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 213 insertions(+), 213 deletions(-) delete mode 100644 README create mode 100644 README.md diff --git a/README b/README deleted file mode 100644 index 86e1d7b..0000000 --- a/README +++ /dev/null @@ -1,213 +0,0 @@ -= Postfix Puppet module - -This module will help install and configure postfix. - -A couple of classes will preconfigure postfix for common needs. - -This module needs: - -- the concat module: git://labs.riseup.net/shared-concat - -!! Upgrade Notice (01/2013) !! - -This module now uses parameterized classes, where it used global variables -before. So please whatch out before pulling, you need to change the -class declarations in your manifest ! - -Deprecation notice ------------------- - -It used to be that one could drop header checks snippets into the -following source directories: - - "puppet:///modules/site-postfix/${fqdn}/header_checks.d" - "puppet:///modules/site-postfix/header_checks.d" - "puppet:///files/etc/postfix/header_checks.d" - "puppet:///modules/postfix/header_checks.d" - -... and TLS policy snippets into those: - - "puppet:///modules/site-postfix/${fqdn}/tls_policy.d" - "puppet:///modules/site-postfix/tls_policy.d" - "puppet:///modules/postfix/tls_policy.d" - -This is not supported anymore. - -Every such snippet much now be configured using the (respectively) -postfix::header_checks_snippet and postfix::tlspolicy_snippet defines. - -Note: You will need to set a global Exec { path => '...' } to a proper pathing -in your manifests, or you will experience some issues such as: - -err: Failed to apply catalog: Parameter unless failed: 'test "x$(postconf -h relay_domains)" == 'xlocalhost host.foo.com'' is not qualified and no path was specified. Please qualify the command or specify a path. - -See: http://www.puppetcookbook.com/posts/set-global-exec-path.html for more -information about how to do this - -Postfix class configuration parameters --------------------------------------- - - * use_amavisd => 'yes' - to include postfix::amavis - - * anon_sasl => 'yes' - to hide the originating IP in email - relayed for an authenticated SASL client; this needs Postfix - 2.3 or later to work; beware! Postfix logs the header replacement - has been done, which means that you are storing this information, - unless you are anonymizing your logs. - - * manage_header_checks => 'yes' - to manage header checks (see - postfix::header_checks for details) - - * manage_transport_regexp => 'yes' - to manage header checks (see - postfix::transport_regexp for details) - - * manage_virtual_regexp => 'yes' - to manage header checks (see - postfix::virtual_regexp for details) - - * manage_tls_policy => 'yes - to manage TLS policy (see - postfix::tlspolicy for details) - - * inet_interfaces: by default, postfix will bind to all interfaces, but - sometimes you don't want that. To bind to specific interfaces, use the - 'inet_interfaces' parameter and set it to exactly what would be in the - main.cf file. - - * myorigin: some hosts have weird-looking host names (dedicated servers and VPSes). To - set the server's domain of origin, set the 'myorigin' parameter - - * smtp_listen: address on which the smtp service will listen (Default: 127.0.0.1) - - * root_mail_recipient: who will receive root's emails (Default: 'nobody') - - * tls_fingerprint_digest: fingerprint digest for tls policy class (Default: 'sha1') - - * use_dovecot_lda: include dovecot declaration at master.cf - - * use_schleuder: whether to include schleuder portion at master.cf - - * use_sympa: whether to include sympa portion at master.cf - - * use_firma: whether to include firma portion at master.cf - - * use_mlmmj: whether to include mlmmj portion at master.cf - - * use_submission: set to "yes" to enable submission section at master.cf - - * use_smtps: set to "yes" to enable smtps section at master.cf - - * mastercf_tail: set this for additional content to be added at the end of master.cf - -== Examples: - - class { 'postfix': } - - class { 'postfix': anon_sasl => 'yes', myorigin => 'foo.bar.tz' } - - postfix::config { "relay_domains": value => "localhost host.foo.com" } - - -Convience classes -================= - -postfix::config ---------------- -this can be used to pass arbitrary postfix configurations by passing the $name -to postconf to add/alter/remove options in main.cf - -Parameters: -- *name*: name of the parameter. -- *ensure*: present/absent. defaults to present. -- *value*: value of the parameter. -- *nonstandard*: inform postfix::config that this parameter is not recognized - by the "postconf" command. defaults to false. - -Requires: -- Class["postfix"] - -Example usage: - - postfix::config { - "smtp_use_tls" => "yes"; - "smtp_sasl_auth_enable" => "yes"; - "smtp_sasl_password_maps" => "hash:/etc/postfix/my_sasl_passwords"; - "relayhost" => "[mail.example.com]:587"; - } - - -postfix::disable ----------------- -If you include this class, the postfix package will be removed and the service -stopped. - - -postfix::hash -------------- -This can be used to create postfix hashed "map" files. It will create "${name}", -and then build "${name}.db" using the "postmap" command. The map file can then -be referred to using postfix::config. - -Parameters: -- *name*: the name of the map file. -- *ensure*: present/absent, defaults to present. -- *source*: file source. - -Requires: -- Class["postfix"] - -Example usage: - - postfix::hash { "/etc/postfix/virtual": - ensure => present, - } - postfix::config { "virtual_alias_maps": - value => "hash:/etc/postfix/virtual" - } - - -postfix::virtual ----------------- -Manages content of the /etc/postfix/virtual map - -Parameters: -- *name*: name of address postfix will lookup. See virtual(8). -- *destination*: where the emails will be delivered to. See virtual(8). -- *ensure*: present/absent, defaults to present. - -Requires: -- Class["postfix"] -- Postfix::Hash["/etc/postfix/virtual"] -- Postfix::Config["virtual_alias_maps"] -- common::line (from module common) - -Example usage: - - postfix::hash { "/etc/postfix/virtual": - ensure => present, - } - postfix::config { "virtual_alias_maps": - value => "hash:/etc/postfix/virtual" - } - postfix::virtual { "user@example.com": - ensure => present, - destination => "root", - } - -postfix::mailalias ------------------- -Wrapper around Puppet mailalias resource, provides newaliases executable. - -Parameters: -- *name*: the name of the alias. -- *ensure*: present/absent, defaults to present. -- *recipient*: recipient of the alias. - -Requires: -- Class["postfix"] - -Example usage: - - postfix::mailalias { "postmaster": - ensure => present, - recipient => 'foo' - } - diff --git a/README.md b/README.md new file mode 100644 index 0000000..86e1d7b --- /dev/null +++ b/README.md @@ -0,0 +1,213 @@ += Postfix Puppet module + +This module will help install and configure postfix. + +A couple of classes will preconfigure postfix for common needs. + +This module needs: + +- the concat module: git://labs.riseup.net/shared-concat + +!! Upgrade Notice (01/2013) !! + +This module now uses parameterized classes, where it used global variables +before. So please whatch out before pulling, you need to change the +class declarations in your manifest ! + +Deprecation notice +------------------ + +It used to be that one could drop header checks snippets into the +following source directories: + + "puppet:///modules/site-postfix/${fqdn}/header_checks.d" + "puppet:///modules/site-postfix/header_checks.d" + "puppet:///files/etc/postfix/header_checks.d" + "puppet:///modules/postfix/header_checks.d" + +... and TLS policy snippets into those: + + "puppet:///modules/site-postfix/${fqdn}/tls_policy.d" + "puppet:///modules/site-postfix/tls_policy.d" + "puppet:///modules/postfix/tls_policy.d" + +This is not supported anymore. + +Every such snippet much now be configured using the (respectively) +postfix::header_checks_snippet and postfix::tlspolicy_snippet defines. + +Note: You will need to set a global Exec { path => '...' } to a proper pathing +in your manifests, or you will experience some issues such as: + +err: Failed to apply catalog: Parameter unless failed: 'test "x$(postconf -h relay_domains)" == 'xlocalhost host.foo.com'' is not qualified and no path was specified. Please qualify the command or specify a path. + +See: http://www.puppetcookbook.com/posts/set-global-exec-path.html for more +information about how to do this + +Postfix class configuration parameters +-------------------------------------- + + * use_amavisd => 'yes' - to include postfix::amavis + + * anon_sasl => 'yes' - to hide the originating IP in email + relayed for an authenticated SASL client; this needs Postfix + 2.3 or later to work; beware! Postfix logs the header replacement + has been done, which means that you are storing this information, + unless you are anonymizing your logs. + + * manage_header_checks => 'yes' - to manage header checks (see + postfix::header_checks for details) + + * manage_transport_regexp => 'yes' - to manage header checks (see + postfix::transport_regexp for details) + + * manage_virtual_regexp => 'yes' - to manage header checks (see + postfix::virtual_regexp for details) + + * manage_tls_policy => 'yes - to manage TLS policy (see + postfix::tlspolicy for details) + + * inet_interfaces: by default, postfix will bind to all interfaces, but + sometimes you don't want that. To bind to specific interfaces, use the + 'inet_interfaces' parameter and set it to exactly what would be in the + main.cf file. + + * myorigin: some hosts have weird-looking host names (dedicated servers and VPSes). To + set the server's domain of origin, set the 'myorigin' parameter + + * smtp_listen: address on which the smtp service will listen (Default: 127.0.0.1) + + * root_mail_recipient: who will receive root's emails (Default: 'nobody') + + * tls_fingerprint_digest: fingerprint digest for tls policy class (Default: 'sha1') + + * use_dovecot_lda: include dovecot declaration at master.cf + + * use_schleuder: whether to include schleuder portion at master.cf + + * use_sympa: whether to include sympa portion at master.cf + + * use_firma: whether to include firma portion at master.cf + + * use_mlmmj: whether to include mlmmj portion at master.cf + + * use_submission: set to "yes" to enable submission section at master.cf + + * use_smtps: set to "yes" to enable smtps section at master.cf + + * mastercf_tail: set this for additional content to be added at the end of master.cf + +== Examples: + + class { 'postfix': } + + class { 'postfix': anon_sasl => 'yes', myorigin => 'foo.bar.tz' } + + postfix::config { "relay_domains": value => "localhost host.foo.com" } + + +Convience classes +================= + +postfix::config +--------------- +this can be used to pass arbitrary postfix configurations by passing the $name +to postconf to add/alter/remove options in main.cf + +Parameters: +- *name*: name of the parameter. +- *ensure*: present/absent. defaults to present. +- *value*: value of the parameter. +- *nonstandard*: inform postfix::config that this parameter is not recognized + by the "postconf" command. defaults to false. + +Requires: +- Class["postfix"] + +Example usage: + + postfix::config { + "smtp_use_tls" => "yes"; + "smtp_sasl_auth_enable" => "yes"; + "smtp_sasl_password_maps" => "hash:/etc/postfix/my_sasl_passwords"; + "relayhost" => "[mail.example.com]:587"; + } + + +postfix::disable +---------------- +If you include this class, the postfix package will be removed and the service +stopped. + + +postfix::hash +------------- +This can be used to create postfix hashed "map" files. It will create "${name}", +and then build "${name}.db" using the "postmap" command. The map file can then +be referred to using postfix::config. + +Parameters: +- *name*: the name of the map file. +- *ensure*: present/absent, defaults to present. +- *source*: file source. + +Requires: +- Class["postfix"] + +Example usage: + + postfix::hash { "/etc/postfix/virtual": + ensure => present, + } + postfix::config { "virtual_alias_maps": + value => "hash:/etc/postfix/virtual" + } + + +postfix::virtual +---------------- +Manages content of the /etc/postfix/virtual map + +Parameters: +- *name*: name of address postfix will lookup. See virtual(8). +- *destination*: where the emails will be delivered to. See virtual(8). +- *ensure*: present/absent, defaults to present. + +Requires: +- Class["postfix"] +- Postfix::Hash["/etc/postfix/virtual"] +- Postfix::Config["virtual_alias_maps"] +- common::line (from module common) + +Example usage: + + postfix::hash { "/etc/postfix/virtual": + ensure => present, + } + postfix::config { "virtual_alias_maps": + value => "hash:/etc/postfix/virtual" + } + postfix::virtual { "user@example.com": + ensure => present, + destination => "root", + } + +postfix::mailalias +------------------ +Wrapper around Puppet mailalias resource, provides newaliases executable. + +Parameters: +- *name*: the name of the alias. +- *ensure*: present/absent, defaults to present. +- *recipient*: recipient of the alias. + +Requires: +- Class["postfix"] + +Example usage: + + postfix::mailalias { "postmaster": + ensure => present, + recipient => 'foo' + } + -- cgit v1.2.3