diff options
| -rw-r--r-- | LICENSE | 661 | ||||
| -rw-r--r-- | files/motion.conf | 637 | ||||
| -rw-r--r-- | manifests/init.pp | 21 |
3 files changed, 1319 insertions, 0 deletions
@@ -0,0 +1,661 @@ + GNU AFFERO GENERAL PUBLIC LICENSE + Version 3, 19 November 2007 + + Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/> + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The GNU Affero General Public License is a free, copyleft license for +software and other kinds of works, specifically designed to ensure +cooperation with the community in the case of network server software. + + The licenses for most software and other practical works are designed +to take away your freedom to share and change the works. By contrast, +our General Public Licenses are intended to guarantee your freedom to +share and change all versions of a program--to make sure it remains free +software for all its users. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +them if you wish), that you receive source code or can get it if you +want it, that you can change the software or use pieces of it in new +free programs, and that you know you can do these things. + + Developers that use our General Public Licenses protect your rights +with two steps: (1) assert copyright on the software, and (2) offer +you this License which gives you legal permission to copy, distribute +and/or modify the software. + + A secondary benefit of defending all users' freedom is that +improvements made in alternate versions of the program, if they +receive widespread use, become available for other developers to +incorporate. Many developers of free software are heartened and +encouraged by the resulting cooperation. However, in the case of +software used on network servers, this result may fail to come about. +The GNU General Public License permits making a modified version and +letting the public access it on a server without ever releasing its +source code to the public. + + The GNU Affero General Public License is designed specifically to +ensure that, in such cases, the modified source code becomes available +to the community. It requires the operator of a network server to +provide the source code of the modified version running there to the +users of that server. Therefore, public use of a modified version, on +a publicly accessible server, gives the public access to the source +code of the modified version. + + An older license, called the Affero General Public License and +published by Affero, was designed to accomplish similar goals. This is +a different license, not a version of the Affero GPL, but Affero has +released a new version of the Affero GPL which permits relicensing under +this license. + + The precise terms and conditions for copying, distribution and +modification follow. + + TERMS AND CONDITIONS + + 0. Definitions. + + "This License" refers to version 3 of the GNU Affero General Public License. + + "Copyright" also means copyright-like laws that apply to other kinds of +works, such as semiconductor masks. + + "The Program" refers to any copyrightable work licensed under this +License. Each licensee is addressed as "you". "Licensees" and +"recipients" may be individuals or organizations. + + To "modify" a work means to copy from or adapt all or part of the work +in a fashion requiring copyright permission, other than the making of an +exact copy. The resulting work is called a "modified version" of the +earlier work or a work "based on" the earlier work. + + A "covered work" means either the unmodified Program or a work based +on the Program. + + To "propagate" a work means to do anything with it that, without +permission, would make you directly or secondarily liable for +infringement under applicable copyright law, except executing it on a +computer or modifying a private copy. Propagation includes copying, +distribution (with or without modification), making available to the +public, and in some countries other activities as well. + + To "convey" a work means any kind of propagation that enables other +parties to make or receive copies. Mere interaction with a user through +a computer network, with no transfer of a copy, is not conveying. + + An interactive user interface displays "Appropriate Legal Notices" +to the extent that it includes a convenient and prominently visible +feature that (1) displays an appropriate copyright notice, and (2) +tells the user that there is no warranty for the work (except to the +extent that warranties are provided), that licensees may convey the +work under this License, and how to view a copy of this License. If +the interface presents a list of user commands or options, such as a +menu, a prominent item in the list meets this criterion. + + 1. Source Code. + + The "source code" for a work means the preferred form of the work +for making modifications to it. "Object code" means any non-source +form of a work. + + A "Standard Interface" means an interface that either is an official +standard defined by a recognized standards body, or, in the case of +interfaces specified for a particular programming language, one that +is widely used among developers working in that language. + + The "System Libraries" of an executable work include anything, other +than the work as a whole, that (a) is included in the normal form of +packaging a Major Component, but which is not part of that Major +Component, and (b) serves only to enable use of the work with that +Major Component, or to implement a Standard Interface for which an +implementation is available to the public in source code form. A +"Major Component", in this context, means a major essential component +(kernel, window system, and so on) of the specific operating system +(if any) on which the executable work runs, or a compiler used to +produce the work, or an object code interpreter used to run it. + + The "Corresponding Source" for a work in object code form means all +the source code needed to generate, install, and (for an executable +work) run the object code and to modify the work, including scripts to +control those activities. However, it does not include the work's +System Libraries, or general-purpose tools or generally available free +programs which are used unmodified in performing those activities but +which are not part of the work. For example, Corresponding Source +includes interface definition files associated with source files for +the work, and the source code for shared libraries and dynamically +linked subprograms that the work is specifically designed to require, +such as by intimate data communication or control flow between those +subprograms and other parts of the work. + + The Corresponding Source need not include anything that users +can regenerate automatically from other parts of the Corresponding +Source. + + The Corresponding Source for a work in source code form is that +same work. + + 2. Basic Permissions. + + All rights granted under this License are granted for the term of +copyright on the Program, and are irrevocable provided the stated +conditions are met. This License explicitly affirms your unlimited +permission to run the unmodified Program. The output from running a +covered work is covered by this License only if the output, given its +content, constitutes a covered work. This License acknowledges your +rights of fair use or other equivalent, as provided by copyright law. + + You may make, run and propagate covered works that you do not +convey, without conditions so long as your license otherwise remains +in force. You may convey covered works to others for the sole purpose +of having them make modifications exclusively for you, or provide you +with facilities for running those works, provided that you comply with +the terms of this License in conveying all material for which you do +not control copyright. Those thus making or running the covered works +for you must do so exclusively on your behalf, under your direction +and control, on terms that prohibit them from making any copies of +your copyrighted material outside their relationship with you. + + Conveying under any other circumstances is permitted solely under +the conditions stated below. Sublicensing is not allowed; section 10 +makes it unnecessary. + + 3. Protecting Users' Legal Rights From Anti-Circumvention Law. + + No covered work shall be deemed part of an effective technological +measure under any applicable law fulfilling obligations under article +11 of the WIPO copyright treaty adopted on 20 December 1996, or +similar laws prohibiting or restricting circumvention of such +measures. + + When you convey a covered work, you waive any legal power to forbid +circumvention of technological measures to the extent such circumvention +is effected by exercising rights under this License with respect to +the covered work, and you disclaim any intention to limit operation or +modification of the work as a means of enforcing, against the work's +users, your or third parties' legal rights to forbid circumvention of +technological measures. + + 4. Conveying Verbatim Copies. + + You may convey verbatim copies of the Program's source code as you +receive it, in any medium, provided that you conspicuously and +appropriately publish on each copy an appropriate copyright notice; +keep intact all notices stating that this License and any +non-permissive terms added in accord with section 7 apply to the code; +keep intact all notices of the absence of any warranty; and give all +recipients a copy of this License along with the Program. + + You may charge any price or no price for each copy that you convey, +and you may offer support or warranty protection for a fee. + + 5. Conveying Modified Source Versions. + + You may convey a work based on the Program, or the modifications to +produce it from the Program, in the form of source code under the +terms of section 4, provided that you also meet all of these conditions: + + a) The work must carry prominent notices stating that you modified + it, and giving a relevant date. + + b) The work must carry prominent notices stating that it is + released under this License and any conditions added under section + 7. This requirement modifies the requirement in section 4 to + "keep intact all notices". + + c) You must license the entire work, as a whole, under this + License to anyone who comes into possession of a copy. This + License will therefore apply, along with any applicable section 7 + additional terms, to the whole of the work, and all its parts, + regardless of how they are packaged. This License gives no + permission to license the work in any other way, but it does not + invalidate such permission if you have separately received it. + + d) If the work has interactive user interfaces, each must display + Appropriate Legal Notices; however, if the Program has interactive + interfaces that do not display Appropriate Legal Notices, your + work need not make them do so. + + A compilation of a covered work with other separate and independent +works, which are not by their nature extensions of the covered work, +and which are not combined with it such as to form a larger program, +in or on a volume of a storage or distribution medium, is called an +"aggregate" if the compilation and its resulting copyright are not +used to limit the access or legal rights of the compilation's users +beyond what the individual works permit. Inclusion of a covered work +in an aggregate does not cause this License to apply to the other +parts of the aggregate. + + 6. Conveying Non-Source Forms. + + You may convey a covered work in object code form under the terms +of sections 4 and 5, provided that you also convey the +machine-readable Corresponding Source under the terms of this License, +in one of these ways: + + a) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by the + Corresponding Source fixed on a durable physical medium + customarily used for software interchange. + + b) Convey the object code in, or embodied in, a physical product + (including a physical distribution medium), accompanied by a + written offer, valid for at least three years and valid for as + long as you offer spare parts or customer support for that product + model, to give anyone who possesses the object code either (1) a + copy of the Corresponding Source for all the software in the + product that is covered by this License, on a durable physical + medium customarily used for software interchange, for a price no + more than your reasonable cost of physically performing this + conveying of source, or (2) access to copy the + Corresponding Source from a network server at no charge. + + c) Convey individual copies of the object code with a copy of the + written offer to provide the Corresponding Source. This + alternative is allowed only occasionally and noncommercially, and + only if you received the object code with such an offer, in accord + with subsection 6b. + + d) Convey the object code by offering access from a designated + place (gratis or for a charge), and offer equivalent access to the + Corresponding Source in the same way through the same place at no + further charge. You need not require recipients to copy the + Corresponding Source along with the object code. If the place to + copy the object code is a network server, the Corresponding Source + may be on a different server (operated by you or a third party) + that supports equivalent copying facilities, provided you maintain + clear directions next to the object code saying where to find the + Corresponding Source. Regardless of what server hosts the + Corresponding Source, you remain obligated to ensure that it is + available for as long as needed to satisfy these requirements. + + e) Convey the object code using peer-to-peer transmission, provided + you inform other peers where the object code and Corresponding + Source of the work are being offered to the general public at no + charge under subsection 6d. + + A separable portion of the object code, whose source code is excluded +from the Corresponding Source as a System Library, need not be +included in conveying the object code work. + + A "User Product" is either (1) a "consumer product", which means any +tangible personal property which is normally used for personal, family, +or household purposes, or (2) anything designed or sold for incorporation +into a dwelling. In determining whether a product is a consumer product, +doubtful cases shall be resolved in favor of coverage. For a particular +product received by a particular user, "normally used" refers to a +typical or common use of that class of product, regardless of the status +of the particular user or of the way in which the particular user +actually uses, or expects or is expected to use, the product. A product +is a consumer product regardless of whether the product has substantial +commercial, industrial or non-consumer uses, unless such uses represent +the only significant mode of use of the product. + + "Installation Information" for a User Product means any methods, +procedures, authorization keys, or other information required to install +and execute modified versions of a covered work in that User Product from +a modified version of its Corresponding Source. The information must +suffice to ensure that the continued functioning of the modified object +code is in no case prevented or interfered with solely because +modification has been made. + + If you convey an object code work under this section in, or with, or +specifically for use in, a User Product, and the conveying occurs as +part of a transaction in which the right of possession and use of the +User Product is transferred to the recipient in perpetuity or for a +fixed term (regardless of how the transaction is characterized), the +Corresponding Source conveyed under this section must be accompanied +by the Installation Information. But this requirement does not apply +if neither you nor any third party retains the ability to install +modified object code on the User Product (for example, the work has +been installed in ROM). + + The requirement to provide Installation Information does not include a +requirement to continue to provide support service, warranty, or updates +for a work that has been modified or installed by the recipient, or for +the User Product in which it has been modified or installed. Access to a +network may be denied when the modification itself materially and +adversely affects the operation of the network or violates the rules and +protocols for communication across the network. + + Corresponding Source conveyed, and Installation Information provided, +in accord with this section must be in a format that is publicly +documented (and with an implementation available to the public in +source code form), and must require no special password or key for +unpacking, reading or copying. + + 7. Additional Terms. + + "Additional permissions" are terms that supplement the terms of this +License by making exceptions from one or more of its conditions. +Additional permissions that are applicable to the entire Program shall +be treated as though they were included in this License, to the extent +that they are valid under applicable law. If additional permissions +apply only to part of the Program, that part may be used separately +under those permissions, but the entire Program remains governed by +this License without regard to the additional permissions. + + When you convey a copy of a covered work, you may at your option +remove any additional permissions from that copy, or from any part of +it. (Additional permissions may be written to require their own +removal in certain cases when you modify the work.) You may place +additional permissions on material, added by you to a covered work, +for which you have or can give appropriate copyright permission. + + Notwithstanding any other provision of this License, for material you +add to a covered work, you may (if authorized by the copyright holders of +that material) supplement the terms of this License with terms: + + a) Disclaiming warranty or limiting liability differently from the + terms of sections 15 and 16 of this License; or + + b) Requiring preservation of specified reasonable legal notices or + author attributions in that material or in the Appropriate Legal + Notices displayed by works containing it; or + + c) Prohibiting misrepresentation of the origin of that material, or + requiring that modified versions of such material be marked in + reasonable ways as different from the original version; or + + d) Limiting the use for publicity purposes of names of licensors or + authors of the material; or + + e) Declining to grant rights under trademark law for use of some + trade names, trademarks, or service marks; or + + f) Requiring indemnification of licensors and authors of that + material by anyone who conveys the material (or modified versions of + it) with contractual assumptions of liability to the recipient, for + any liability that these contractual assumptions directly impose on + those licensors and authors. + + All other non-permissive additional terms are considered "further +restrictions" within the meaning of section 10. If the Program as you +received it, or any part of it, contains a notice stating that it is +governed by this License along with a term that is a further +restriction, you may remove that term. If a license document contains +a further restriction but permits relicensing or conveying under this +License, you may add to a covered work material governed by the terms +of that license document, provided that the further restriction does +not survive such relicensing or conveying. + + If you add terms to a covered work in accord with this section, you +must place, in the relevant source files, a statement of the +additional terms that apply to those files, or a notice indicating +where to find the applicable terms. + + Additional terms, permissive or non-permissive, may be stated in the +form of a separately written license, or stated as exceptions; +the above requirements apply either way. + + 8. Termination. + + You may not propagate or modify a covered work except as expressly +provided under this License. Any attempt otherwise to propagate or +modify it is void, and will automatically terminate your rights under +this License (including any patent licenses granted under the third +paragraph of section 11). + + However, if you cease all violation of this License, then your +license from a particular copyright holder is reinstated (a) +provisionally, unless and until the copyright holder explicitly and +finally terminates your license, and (b) permanently, if the copyright +holder fails to notify you of the violation by some reasonable means +prior to 60 days after the cessation. + + Moreover, your license from a particular copyright holder is +reinstated permanently if the copyright holder notifies you of the +violation by some reasonable means, this is the first time you have +received notice of violation of this License (for any work) from that +copyright holder, and you cure the violation prior to 30 days after +your receipt of the notice. + + Termination of your rights under this section does not terminate the +licenses of parties who have received copies or rights from you under +this License. If your rights have been terminated and not permanently +reinstated, you do not qualify to receive new licenses for the same +material under section 10. + + 9. Acceptance Not Required for Having Copies. + + You are not required to accept this License in order to receive or +run a copy of the Program. Ancillary propagation of a covered work +occurring solely as a consequence of using peer-to-peer transmission +to receive a copy likewise does not require acceptance. However, +nothing other than this License grants you permission to propagate or +modify any covered work. These actions infringe copyright if you do +not accept this License. Therefore, by modifying or propagating a +covered work, you indicate your acceptance of this License to do so. + + 10. Automatic Licensing of Downstream Recipients. + + Each time you convey a covered work, the recipient automatically +receives a license from the original licensors, to run, modify and +propagate that work, subject to this License. You are not responsible +for enforcing compliance by third parties with this License. + + An "entity transaction" is a transaction transferring control of an +organization, or substantially all assets of one, or subdividing an +organization, or merging organizations. If propagation of a covered +work results from an entity transaction, each party to that +transaction who receives a copy of the work also receives whatever +licenses to the work the party's predecessor in interest had or could +give under the previous paragraph, plus a right to possession of the +Corresponding Source of the work from the predecessor in interest, if +the predecessor has it or can get it with reasonable efforts. + + You may not impose any further restrictions on the exercise of the +rights granted or affirmed under this License. For example, you may +not impose a license fee, royalty, or other charge for exercise of +rights granted under this License, and you may not initiate litigation +(including a cross-claim or counterclaim in a lawsuit) alleging that +any patent claim is infringed by making, using, selling, offering for +sale, or importing the Program or any portion of it. + + 11. Patents. + + A "contributor" is a copyright holder who authorizes use under this +License of the Program or a work on which the Program is based. The +work thus licensed is called the contributor's "contributor version". + + A contributor's "essential patent claims" are all patent claims +owned or controlled by the contributor, whether already acquired or +hereafter acquired, that would be infringed by some manner, permitted +by this License, of making, using, or selling its contributor version, +but do not include claims that would be infringed only as a +consequence of further modification of the contributor version. For +purposes of this definition, "control" includes the right to grant +patent sublicenses in a manner consistent with the requirements of +this License. + + Each contributor grants you a non-exclusive, worldwide, royalty-free +patent license under the contributor's essential patent claims, to +make, use, sell, offer for sale, import and otherwise run, modify and +propagate the contents of its contributor version. + + In the following three paragraphs, a "patent license" is any express +agreement or commitment, however denominated, not to enforce a patent +(such as an express permission to practice a patent or covenant not to +sue for patent infringement). To "grant" such a patent license to a +party means to make such an agreement or commitment not to enforce a +patent against the party. + + If you convey a covered work, knowingly relying on a patent license, +and the Corresponding Source of the work is not available for anyone +to copy, free of charge and under the terms of this License, through a +publicly available network server or other readily accessible means, +then you must either (1) cause the Corresponding Source to be so +available, or (2) arrange to deprive yourself of the benefit of the +patent license for this particular work, or (3) arrange, in a manner +consistent with the requirements of this License, to extend the patent +license to downstream recipients. "Knowingly relying" means you have +actual knowledge that, but for the patent license, your conveying the +covered work in a country, or your recipient's use of the covered work +in a country, would infringe one or more identifiable patents in that +country that you have reason to believe are valid. + + If, pursuant to or in connection with a single transaction or +arrangement, you convey, or propagate by procuring conveyance of, a +covered work, and grant a patent license to some of the parties +receiving the covered work authorizing them to use, propagate, modify +or convey a specific copy of the covered work, then the patent license +you grant is automatically extended to all recipients of the covered +work and works based on it. + + A patent license is "discriminatory" if it does not include within +the scope of its coverage, prohibits the exercise of, or is +conditioned on the non-exercise of one or more of the rights that are +specifically granted under this License. You may not convey a covered +work if you are a party to an arrangement with a third party that is +in the business of distributing software, under which you make payment +to the third party based on the extent of your activity of conveying +the work, and under which the third party grants, to any of the +parties who would receive the covered work from you, a discriminatory +patent license (a) in connection with copies of the covered work +conveyed by you (or copies made from those copies), or (b) primarily +for and in connection with specific products or compilations that +contain the covered work, unless you entered into that arrangement, +or that patent license was granted, prior to 28 March 2007. + + Nothing in this License shall be construed as excluding or limiting +any implied license or other defenses to infringement that may +otherwise be available to you under applicable patent law. + + 12. No Surrender of Others' Freedom. + + If conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot convey a +covered work so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you may +not convey it at all. For example, if you agree to terms that obligate you +to collect a royalty for further conveying from those to whom you convey +the Program, the only way you could satisfy both those terms and this +License would be to refrain entirely from conveying the Program. + + 13. Remote Network Interaction; Use with the GNU General Public License. + + Notwithstanding any other provision of this License, if you modify the +Program, your modified version must prominently offer all users +interacting with it remotely through a computer network (if your version +supports such interaction) an opportunity to receive the Corresponding +Source of your version by providing access to the Corresponding Source +from a network server at no charge, through some standard or customary +means of facilitating copying of software. This Corresponding Source +shall include the Corresponding Source for any work covered by version 3 +of the GNU General Public License that is incorporated pursuant to the +following paragraph. + + Notwithstanding any other provision of this License, you have +permission to link or combine any covered work with a work licensed +under version 3 of the GNU General Public License into a single +combined work, and to convey the resulting work. The terms of this +License will continue to apply to the part which is the covered work, +but the work with which it is combined will remain governed by version +3 of the GNU General Public License. + + 14. Revised Versions of this License. + + The Free Software Foundation may publish revised and/or new versions of +the GNU Affero General Public License from time to time. Such new versions +will be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + + Each version is given a distinguishing version number. If the +Program specifies that a certain numbered version of the GNU Affero General +Public License "or any later version" applies to it, you have the +option of following the terms and conditions either of that numbered +version or of any later version published by the Free Software +Foundation. If the Program does not specify a version number of the +GNU Affero General Public License, you may choose any version ever published +by the Free Software Foundation. + + If the Program specifies that a proxy can decide which future +versions of the GNU Affero General Public License can be used, that proxy's +public statement of acceptance of a version permanently authorizes you +to choose that version for the Program. + + Later license versions may give you additional or different +permissions. However, no additional obligations are imposed on any +author or copyright holder as a result of your choosing to follow a +later version. + + 15. Disclaimer of Warranty. + + THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY +APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT +HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY +OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, +THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM +IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF +ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. Limitation of Liability. + + IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS +THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY +GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE +USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF +DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD +PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), +EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF +SUCH DAMAGES. + + 17. Interpretation of Sections 15 and 16. + + If the disclaimer of warranty and limitation of liability provided +above cannot be given local legal effect according to their terms, +reviewing courts shall apply local law that most closely approximates +an absolute waiver of all civil liability in connection with the +Program, unless a warranty or assumption of liability accompanies a +copy of the Program in return for a fee. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +state the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + <one line to give the program's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU Affero General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU Affero General Public License for more details. + + You should have received a copy of the GNU Affero General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. + +Also add information on how to contact you by electronic and paper mail. + + If your software can interact with users remotely through a computer +network, you should also make sure that it provides a way for users to +get its source. For example, if your program is a web application, its +interface could display a "Source" link that leads users to an archive +of the code. There are many ways you could offer source, and different +solutions will be better for different programs; see section 13 for the +specific requirements. + + You should also get your employer (if you work as a programmer) or school, +if any, to sign a "copyright disclaimer" for the program, if necessary. +For more information on this, and how to apply and follow the GNU AGPL, see +<http://www.gnu.org/licenses/>. diff --git a/files/motion.conf b/files/motion.conf new file mode 100644 index 0000000..6781839 --- /dev/null +++ b/files/motion.conf @@ -0,0 +1,637 @@ +# Rename this distribution example file to motion.conf +# +# This config file was generated by motion 3.2.12 + + +############################################################ +# Daemon +############################################################ + +# Start in daemon (background) mode and release terminal (default: off) +daemon on + +# File to store the process ID, also called pid file. (default: not defined) +process_id_file /var/run/motion/motion.pid + +############################################################ +# Basic Setup Mode +############################################################ + +# Start in Setup-Mode, daemon disabled. (default: off) +setup_mode off + +########################################################### +# Capture device options +############################################################ + +# Videodevice to be used for capturing (default /dev/video0) +# for FreeBSD default is /dev/bktr0 +videodevice /dev/video0 + +# v4l2_palette allows to choose preferable palette to be use by motion +# to capture from those supported by your videodevice. (default: 8) +# E.g. if your videodevice supports both V4L2_PIX_FMT_SBGGR8 and +# V4L2_PIX_FMT_MJPEG then motion will by default use V4L2_PIX_FMT_MJPEG. +# Setting v4l2_palette to 1 forces motion to use V4L2_PIX_FMT_SBGGR8 +# instead. +# +# Values : +# V4L2_PIX_FMT_SN9C10X : 0 'S910' +# V4L2_PIX_FMT_SBGGR8 : 1 'BA81' +# V4L2_PIX_FMT_MJPEG : 2 'MJPEG' +# V4L2_PIX_FMT_JPEG : 3 'JPEG' +# V4L2_PIX_FMT_RGB24 : 4 'RGB3' +# V4L2_PIX_FMT_UYVY : 5 'UYVY' +# V4L2_PIX_FMT_YUYV : 6 'YUYV' +# V4L2_PIX_FMT_YUV422P : 7 '422P' +# V4L2_PIX_FMT_YUV420 : 8 'YU12' +v4l2_palette 8 + +# Tuner device to be used for capturing using tuner as source (default /dev/tuner0) +# This is ONLY used for FreeBSD. Leave it commented out for Linux +; tunerdevice /dev/tuner0 + +# The video input to be used (default: 8) +# Should normally be set to 0 or 1 for video/TV cards, and 8 for USB cameras +input 8 + +# The video norm to use (only for video capture and TV tuner cards) +# Values: 0 (PAL), 1 (NTSC), 2 (SECAM), 3 (PAL NC no colour). Default: 0 (PAL) +norm 0 + +# The frequency to set the tuner to (kHz) (only for TV tuner cards) (default: 0) +frequency 0 + +# Rotate image this number of degrees. The rotation affects all saved images as +# well as mpeg movies. Valid values: 0 (default = no rotation), 90, 180 and 270. +rotate 0 + +# Image width (pixels). Valid range: Camera dependent, default: 352 +width 320 + +# Image height (pixels). Valid range: Camera dependent, default: 288 +height 240 + +# Maximum number of frames to be captured per second. +# Valid range: 2-100. Default: 100 (almost no limit). +framerate 2 + +# Minimum time in seconds between capturing picture frames from the camera. +# Default: 0 = disabled - the capture rate is given by the camera framerate. +# This option is used when you want to capture images at a rate lower than 2 per second. +minimum_frame_time 0 + +# URL to use if you are using a network camera, size will be autodetected (incl http:// ftp:// or file:///) +# Must be a URL that returns single jpeg pictures or a raw mjpeg stream. Default: Not defined +; netcam_url value + +# Username and password for network camera (only if required). Default: not defined +# Syntax is user:password +; netcam_userpass value + +# The setting for keep-alive of network socket, should improve performance on compatible net cameras. +# 1.0: The historical implementation using HTTP/1.0, closing the socket after each http request. +# keep_alive: Use HTTP/1.0 requests with keep alive header to reuse the same connection. +# 1.1: Use HTTP/1.1 requests that support keep alive as default. +# Default: 1.0 +; netcam_http 1.0 + +# URL to use for a netcam proxy server, if required, e.g. "http://myproxy". +# If a port number other than 80 is needed, use "http://myproxy:1234". +# Default: not defined +; netcam_proxy value + +# Set less strict jpeg checks for network cameras with a poor/buggy firmware. +# Default: off +netcam_tolerant_check off + +# Let motion regulate the brightness of a video device (default: off). +# The auto_brightness feature uses the brightness option as its target value. +# If brightness is zero auto_brightness will adjust to average brightness value 128. +# Only recommended for cameras without auto brightness +auto_brightness off + +# Set the initial brightness of a video device. +# If auto_brightness is enabled, this value defines the average brightness level +# which Motion will try and adjust to. +# Valid range 0-255, default 0 = disabled +brightness 0 + +# Set the contrast of a video device. +# Valid range 0-255, default 0 = disabled +contrast 0 + +# Set the saturation of a video device. +# Valid range 0-255, default 0 = disabled +saturation 0 + +# Set the hue of a video device (NTSC feature). +# Valid range 0-255, default 0 = disabled +hue 0 + + +############################################################ +# Round Robin (multiple inputs on same video device name) +############################################################ + +# Number of frames to capture in each roundrobin step (default: 1) +roundrobin_frames 1 + +# Number of frames to skip before each roundrobin step (default: 1) +roundrobin_skip 1 + +# Try to filter out noise generated by roundrobin (default: off) +switchfilter off + + +############################################################ +# Motion Detection Settings: +############################################################ + +# Threshold for number of changed pixels in an image that +# triggers motion detection (default: 1500) +threshold 1500 + +# Automatically tune the threshold down if possible (default: off) +threshold_tune off + +# Noise threshold for the motion detection (default: 32) +noise_level 32 + +# Automatically tune the noise threshold (default: on) +noise_tune on + +# Despeckle motion image using (e)rode or (d)ilate or (l)abel (Default: not defined) +# Recommended value is EedDl. Any combination (and number of) of E, e, d, and D is valid. +# (l)abeling must only be used once and the 'l' must be the last letter. +# Comment out to disable +despeckle EedDl + +# Detect motion in predefined areas (1 - 9). Areas are numbered like that: 1 2 3 +# A script (on_area_detected) is started immediately when motion is 4 5 6 +# detected in one of the given areas, but only once during an event. 7 8 9 +# One or more areas can be specified with this option. (Default: not defined) +; area_detect value + +# PGM file to use as a sensitivity mask. +# Full path name to. (Default: not defined) +; mask_file value + +# Dynamically create a mask file during operation (default: 0) +# Adjust speed of mask changes from 0 (off) to 10 (fast) +smart_mask_speed 0 + +# Ignore sudden massive light intensity changes given as a percentage of the picture +# area that changed intensity. Valid range: 0 - 100 , default: 0 = disabled +lightswitch 0 + +# Picture frames must contain motion at least the specified number of frames +# in a row before they are detected as true motion. At the default of 1, all +# motion is detected. Valid range: 1 to thousands, recommended 1-5 +minimum_motion_frames 1 + +# Specifies the number of pre-captured (buffered) pictures from before motion +# was detected that will be output at motion detection. +# Recommended range: 0 to 5 (default: 0) +# Do not use large values! Large values will cause Motion to skip video frames and +# cause unsmooth mpegs. To smooth mpegs use larger values of post_capture instead. +pre_capture 0 + +# Number of frames to capture after motion is no longer detected (default: 0) +post_capture 0 + +# Gap is the seconds of no motion detection that triggers the end of an event +# An event is defined as a series of motion images taken within a short timeframe. +# Recommended value is 60 seconds (Default). The value 0 is allowed and disables +# events causing all Motion to be written to one single mpeg file and no pre_capture. +gap 60 + +# Maximum length in seconds of an mpeg movie +# When value is exceeded a new mpeg file is created. (Default: 0 = infinite) +max_mpeg_time 0 + +# Always save images even if there was no motion (default: off) +output_all off + + +############################################################ +# Image File Output +############################################################ + +# Output 'normal' pictures when motion is detected (default: on) +# Valid values: on, off, first, best, center +# When set to 'first', only the first picture of an event is saved. +# Picture with most motion of an event is saved when set to 'best'. +# Picture with motion nearest center of picture is saved when set to 'center'. +# Can be used as preview shot for the corresponding movie. +output_normal on + +# Output pictures with only the pixels moving object (ghost images) (default: off) +output_motion off + +# The quality (in percent) to be used by the jpeg compression (default: 75) +quality 75 + +# Output ppm images instead of jpeg (default: off) +ppm off + + +############################################################ +# FFMPEG related options +# Film (mpeg) file output, and deinterlacing of the video input +# The options movie_filename and timelapse_filename are also used +# by the ffmpeg feature +############################################################ + +# Use ffmpeg to encode mpeg movies in realtime (default: off) +ffmpeg_cap_new on + +# Use ffmpeg to make movies with only the pixels moving +# object (ghost images) (default: off) +ffmpeg_cap_motion off + +# Use ffmpeg to encode a timelapse movie +# Default value 0 = off - else save frame every Nth second +ffmpeg_timelapse 0 + +# The file rollover mode of the timelapse video +# Valid values: hourly, daily (default), weekly-sunday, weekly-monday, monthly, manual +ffmpeg_timelapse_mode daily + +# Bitrate to be used by the ffmpeg encoder (default: 400000) +# This option is ignored if ffmpeg_variable_bitrate is not 0 (disabled) +ffmpeg_bps 500000 + +# Enables and defines variable bitrate for the ffmpeg encoder. +# ffmpeg_bps is ignored if variable bitrate is enabled. +# Valid values: 0 (default) = fixed bitrate defined by ffmpeg_bps, +# or the range 2 - 31 where 2 means best quality and 31 is worst. +ffmpeg_variable_bitrate 0 + +# Codec to used by ffmpeg for the video compression. +# Timelapse mpegs are always made in mpeg1 format independent from this option. +# Supported formats are: mpeg1 (ffmpeg-0.4.8 only), mpeg4 (default), and msmpeg4. +# mpeg1 - gives you files with extension .mpg +# mpeg4 or msmpeg4 - gives you files with extension .avi +# msmpeg4 is recommended for use with Windows Media Player because +# it requires no installation of codec on the Windows client. +# swf - gives you a flash film with extension .swf +# flv - gives you a flash video with extension .flv +# ffv1 - FF video codec 1 for Lossless Encoding ( experimental ) +# mov - QuickTime ( testing ) +ffmpeg_video_codec swf + +# Use ffmpeg to deinterlace video. Necessary if you use an analog camera +# and see horizontal combing on moving objects in video or pictures. +# (default: off) +ffmpeg_deinterlace off + + +############################################################ +# Snapshots (Traditional Periodic Webcam File Output) +############################################################ + +# Make automated snapshot every N seconds (default: 0 = disabled) +snapshot_interval 0 + + +############################################################ +# Text Display +# %Y = year, %m = month, %d = date, +# %H = hour, %M = minute, %S = second, %T = HH:MM:SS, +# %v = event, %q = frame number, %t = thread (camera) number, +# %D = changed pixels, %N = noise level, \n = new line, +# %i and %J = width and height of motion area, +# %K and %L = X and Y coordinates of motion center +# %C = value defined by text_event - do not use with text_event! +# You can put quotation marks around the text to allow +# leading spaces +############################################################ + +# Locate and draw a box around the moving object. +# Valid values: on, off and preview (default: off) +# Set to 'preview' will only draw a box in preview_shot pictures. +locate off + +# Draws the timestamp using same options as C function strftime(3) +# Default: %Y-%m-%d\n%T = date in ISO format and time in 24 hour clock +# Text is placed in lower right corner +text_right %Y-%m-%d\n%T-%q + +# Draw a user defined text on the images using same options as C function strftime(3) +# Default: Not defined = no text +# Text is placed in lower left corner +; text_left CAMERA %t + +# Draw the number of changed pixed on the images (default: off) +# Will normally be set to off except when you setup and adjust the motion settings +# Text is placed in upper right corner +text_changes off + +# This option defines the value of the special event conversion specifier %C +# You can use any conversion specifier in this option except %C. Date and time +# values are from the timestamp of the first image in the current event. +# Default: %Y%m%d%H%M%S +# The idea is that %C can be used filenames and text_left/right for creating +# a unique identifier for each event. +text_event %Y%m%d%H%M%S + +# Draw characters at twice normal size on images. (default: off) +text_double off + + +############################################################ +# Target Directories and filenames For Images And Films +# For the options snapshot_, jpeg_, mpeg_ and timelapse_filename +# you can use conversion specifiers +# %Y = year, %m = month, %d = date, +# %H = hour, %M = minute, %S = second, +# %v = event, %q = frame number, %t = thread (camera) number, +# %D = changed pixels, %N = noise level, +# %i and %J = width and height of motion area, +# %K and %L = X and Y coordinates of motion center +# %C = value defined by text_event +# Quotation marks round string are allowed. +############################################################ + +# Target base directory for pictures and films +# Recommended to use absolute path. (Default: current working directory) +target_dir /tmp/motion + +# File path for snapshots (jpeg or ppm) relative to target_dir +# Default: %v-%Y%m%d%H%M%S-snapshot +# Default value is equivalent to legacy oldlayout option +# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-snapshot +# File extension .jpg or .ppm is automatically added so do not include this. +# Note: A symbolic link called lastsnap.jpg created in the target_dir will always +# point to the latest snapshot, unless snapshot_filename is exactly 'lastsnap' +snapshot_filename %v-%Y%m%d%H%M%S-snapshot + +# File path for motion triggered images (jpeg or ppm) relative to target_dir +# Default: %v-%Y%m%d%H%M%S-%q +# Default value is equivalent to legacy oldlayout option +# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H/%M/%S-%q +# File extension .jpg or .ppm is automatically added so do not include this +# Set to 'preview' together with best-preview feature enables special naming +# convention for preview shots. See motion guide for details +jpeg_filename %v-%Y%m%d%H%M%S-%q + +# File path for motion triggered ffmpeg films (mpeg) relative to target_dir +# Default: %v-%Y%m%d%H%M%S +# Default value is equivalent to legacy oldlayout option +# For Motion 3.0 compatible mode choose: %Y/%m/%d/%H%M%S +# File extension .mpg or .avi is automatically added so do not include this +# This option was previously called ffmpeg_filename +movie_filename %v-%Y%m%d%H%M%S + +# File path for timelapse mpegs relative to target_dir +# Default: %Y%m%d-timelapse +# Default value is near equivalent to legacy oldlayout option +# For Motion 3.0 compatible mode choose: %Y/%m/%d-timelapse +# File extension .mpg is automatically added so do not include this +timelapse_filename %Y%m%d-timelapse + + +############################################################ +# Live Webcam Server +############################################################ + +# The mini-http server listens to this port for requests (default: 0 = disabled) +webcam_port 8081 + +# Quality of the jpeg (in percent) images produced (default: 50) +webcam_quality 50 + +# Output frames at 1 fps when no motion is detected and increase to the +# rate given by webcam_maxrate when motion is detected (default: off) +webcam_motion off + +# Maximum framerate for webcam streams (default: 1) +webcam_maxrate 1 + +# Restrict webcam connections to localhost only (default: on) +webcam_localhost on + +# Limits the number of images per connection (default: 0 = unlimited) +# Number can be defined by multiplying actual webcam rate by desired number of seconds +# Actual webcam rate is the smallest of the numbers framerate and webcam_maxrate +webcam_limit 0 + + +############################################################ +# HTTP Based Control +############################################################ + +# TCP/IP port for the http server to listen on (default: 0 = disabled) +control_port 8080 + +# Restrict control connections to localhost only (default: on) +control_localhost on + +# Output for http server, select off to choose raw text plain (default: on) +control_html_output on + +# Authentication for the http based control. Syntax username:password +# Default: not defined (Disabled) +; control_authentication username:password + + +############################################################ +# Tracking (Pan/Tilt) +############################################################ + +# Type of tracker (0=none (default), 1=stepper, 2=iomojo, 3=pwc, 4=generic, 5=uvcvideo) +# The generic type enables the definition of motion center and motion size to +# be used with the conversion specifiers for options like on_motion_detected +track_type 0 + +# Enable auto tracking (default: off) +track_auto off + +# Serial port of motor (default: none) +; track_port value + +# Motor number for x-axis (default: 0) +track_motorx 0 + +# Motor number for y-axis (default: 0) +track_motory 0 + +# Maximum value on x-axis (default: 0) +track_maxx 0 + +# Maximum value on y-axis (default: 0) +track_maxy 0 + +# ID of an iomojo camera if used (default: 0) +track_iomojo_id 0 + +# Angle in degrees the camera moves per step on the X-axis +# with auto-track (default: 10) +# Currently only used with pwc type cameras +track_step_angle_x 10 + +# Angle in degrees the camera moves per step on the Y-axis +# with auto-track (default: 10) +# Currently only used with pwc type cameras +track_step_angle_y 10 + +# Delay to wait for after tracking movement as number +# of picture frames (default: 10) +track_move_wait 10 + +# Speed to set the motor to (stepper motor option) (default: 255) +track_speed 255 + +# Number of steps to make (stepper motor option) (default: 40) +track_stepsize 40 + + +############################################################ +# External Commands, Warnings and Logging: +# You can use conversion specifiers for the on_xxxx commands +# %Y = year, %m = month, %d = date, +# %H = hour, %M = minute, %S = second, +# %v = event, %q = frame number, %t = thread (camera) number, +# %D = changed pixels, %N = noise level, +# %i and %J = width and height of motion area, +# %K and %L = X and Y coordinates of motion center +# %C = value defined by text_event +# %f = filename with full path +# %n = number indicating filetype +# Both %f and %n are only defined for on_picture_save, +# on_movie_start and on_movie_end +# Quotation marks round string are allowed. +############################################################ + +# Do not sound beeps when detecting motion (default: on) +# Note: Motion never beeps when running in daemon mode. +quiet on + +# Command to be executed when an event starts. (default: none) +# An event starts at first motion detected after a period of no motion defined by gap +; on_event_start value + +# Command to be executed when an event ends after a period of no motion +# (default: none). The period of no motion is defined by option gap. +; on_event_end value + +# Command to be executed when a picture (.ppm|.jpg) is saved (default: none) +# To give the filename as an argument to a command append it with %f +; on_picture_save value + +# Command to be executed when a motion frame is detected (default: none) +; on_motion_detected value + +# Command to be executed when motion in a predefined area is detected +# Check option 'area_detect'. (default: none) +; on_area_detected value + +# Command to be executed when a movie file (.mpg|.avi) is created. (default: none) +# To give the filename as an argument to a command append it with %f +; on_movie_start value + +# Command to be executed when a movie file (.mpg|.avi) is closed. (default: none) +# To give the filename as an argument to a command append it with %f +; on_movie_end value + +# Command to be executed when a camera can't be opened or if it is lost +# NOTE: There is situations when motion doesn't detect a lost camera! +# It depends on the driver, some drivers don't detect a lost camera at all +# Some hang the motion thread. Some even hang the PC! (default: none) +; on_camera_lost value + +############################################################ +# Common Options For MySQL and PostgreSQL database features. +# Options require the MySQL/PostgreSQL options to be active also. +############################################################ + +# Log to the database when creating motion triggered image file (default: on) +sql_log_image on + +# Log to the database when creating a snapshot image file (default: on) +sql_log_snapshot on + +# Log to the database when creating motion triggered mpeg file (default: off) +sql_log_mpeg off + +# Log to the database when creating timelapse mpeg file (default: off) +sql_log_timelapse off + +# SQL query string that is sent to the database +# Use same conversion specifiers has for text features +# Additional special conversion specifiers are +# %n = the number representing the file_type +# %f = filename with full path +# Default value: +# insert into security(camera, filename, frame, file_type, time_stamp, text_event) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C') +sql_query insert into security(camera, filename, frame, file_type, time_stamp, event_time_stamp) values('%t', '%f', '%q', '%n', '%Y-%m-%d %T', '%C') + + +############################################################ +# Database Options For MySQL +############################################################ + +# Mysql database to log to (default: not defined) +; mysql_db value + +# The host on which the database is located (default: localhost) +; mysql_host value + +# User account name for MySQL database (default: not defined) +; mysql_user value + +# User password for MySQL database (default: not defined) +; mysql_password value + + +############################################################ +# Database Options For PostgreSQL +############################################################ + +# PostgreSQL database to log to (default: not defined) +; pgsql_db value + +# The host on which the database is located (default: localhost) +; pgsql_host value + +# User account name for PostgreSQL database (default: not defined) +; pgsql_user value + +# User password for PostgreSQL database (default: not defined) +; pgsql_password value + +# Port on which the PostgreSQL database is located (default: 5432) +; pgsql_port 5432 + + +############################################################ +# Video Loopback Device (vloopback project) +############################################################ + +# Output images to a video4linux loopback device +# The value '-' means next available (default: not defined) +; video_pipe value + +# Output motion images to a video4linux loopback device +# The value '-' means next available (default: not defined) +; motion_video_pipe value + + +############################################################## +# Thread config files - One for each camera. +# Except if only one camera - You only need this config file. +# If you have more than one camera you MUST define one thread +# config file for each camera in addition to this config file. +############################################################## + +# Remember: If you have more than one camera you must have one +# thread file for each camera. E.g. 2 cameras requires 3 files: +# This motion.conf file AND thread1.conf and thread2.conf. +# Only put the options that are unique to each camera in the +# thread config files. +; thread /usr/local/etc/thread1.conf +; thread /usr/local/etc/thread2.conf +; thread /usr/local/etc/thread3.conf +; thread /usr/local/etc/thread4.conf + diff --git a/manifests/init.pp b/manifests/init.pp new file mode 100644 index 0000000..5b44507 --- /dev/null +++ b/manifests/init.pp @@ -0,0 +1,21 @@ +class motion { + package { 'motion': + ensure => installed, + } + + service { 'motion': + ensure => 'running', + enable => true, + } + + file{'/etc/motion/motion.conf': + source => [ "puppet:///modules/site-motion/${fqdn}/motion.conf", + "puppet:///modules/site-motion/motion.conf", + "puppet:///modules/motion/motion.conf" ], + require => Package['motion'], + notify => Service['motion'], + owner => root, + group => motion, + mode => 0640; + } +} |