diff options
Diffstat (limited to 'files')
| -rw-r--r-- | files/gitolite.rc.squeeze | 235 |
1 files changed, 0 insertions, 235 deletions
diff --git a/files/gitolite.rc.squeeze b/files/gitolite.rc.squeeze deleted file mode 100644 index 141d2b9..0000000 --- a/files/gitolite.rc.squeeze +++ /dev/null @@ -1,235 +0,0 @@ -# paths and configuration variables for gitolite - -$GL_PACKAGE_CONF="/etc/gitolite"; -$GL_PACKAGE_HOOKS="/usr/share/gitolite/hooks"; - -# please read comments before editing - -# this file is meant to be pulled into a perl program using "do" or "require". - -# You do NOT need to know perl to edit the paths; it should be fairly -# self-explanatory and easy to maintain perl syntax :-) - -# -------------------------------------- -# Do not uncomment these values unless you know what you're doing -# $GL_PACKAGE_CONF = ""; -# $GL_PACKAGE_HOOKS = ""; - -# -------------------------------------- - -# -------------------------------------- - -# this is where the repos go. If you provide a relative path (not starting -# with "/"), it's relative to your $HOME. You may want to put in something -# like "/bigdisk" or whatever if your $HOME is too small for the repos, for -# example - -$REPO_BASE="repositories"; - -# the default umask for repositories is 0077; change this if you run stuff -# like gitweb and find it can't read the repos. Please note the syntax; the -# leading 0 is required - -# $REPO_UMASK = 0077; # gets you 'rwx------' -# $REPO_UMASK = 0027; # gets you 'rwxr-x---' -$REPO_UMASK = 0022; # gets you 'rwxr-xr-x' - -# part of the setup of gitweb is a variable called $projects_list (please see -# gitweb documentation for more on this). Set this to the same value: - -$PROJECTS_LIST = $ENV{HOME} . "/projects.list"; - -# -------------------------------------- - -# I see no reason anyone may want to change the gitolite admin directory, but -# feel free to do so. However, please note that it *must* be an *absolute* -# path (i.e., starting with a "/" character) - -# gitolite admin directory, files, etc - -$GL_ADMINDIR=$ENV{HOME} . "/.gitolite"; - -# -------------------------------------- - -# templates for location of the log files and format of their names - -# I prefer this template (note the %y and %m placeholders) -# it produces files like `~/.gitolite/logs/gitolite-2009-09.log` - -$GL_LOGT="$GL_ADMINDIR/logs/gitolite-%y-%m.log"; - -# other choices are below, or you can make your own -- but PLEASE MAKE SURE -# the directory exists and is writable; gitolite won't do that for you (unless -# it is the default, which is "$GL_ADMINDIR/logs") - -# $GL_LOGT="$GL_ADMINDIR/logs/gitolite-%y-%m-%d.log"; -# $GL_LOGT="$GL_ADMINDIR/logs/gitolite-%y.log"; - -# -------------------------------------- - -# Please DO NOT change these three paths - -$GL_CONF="$GL_ADMINDIR/conf/gitolite.conf"; -$GL_KEYDIR="$GL_ADMINDIR/keydir"; -$GL_CONF_COMPILED="$GL_ADMINDIR/conf/gitolite.conf-compiled.pm"; - -# -------------------------------------- - -# if git on your server is on a standard path (that is -# ssh git@server git --version -# works), leave this setting as is. Otherwise, choose one of the -# alternatives, or write your own - -$GIT_PATH=""; -# $GIT_PATH="/opt/bin/"; - -# -------------------------------------- - -# ---------------------------------------------------------------------- -# BIG CONFIG SETTINGS - -# Please read doc/big-config.mkd for details - -$GL_BIG_CONFIG = 0; -$GL_NO_DAEMON_NO_GITWEB = 0; -$GL_NO_CREATE_REPOS = 0; -$GL_NO_SETUP_AUTHKEYS = 0; - -# ---------------------------------------------------------------------- -# SECURITY SENSITIVE SETTINGS -# -# Settings below this point may have security implications. That -# usually means that I have not thought hard enough about all the -# possible ways to crack security if these settings are enabled. - -# Please see details on each setting for specifics, if any. -# ---------------------------------------------------------------------- - - - -# -------------------------------------- -# ALLOW REPO ADMIN TO SET GITCONFIG KEYS -# -# Gitolite allows you to set git repo options using the "config" keyword; see -# conf/example.conf for details and syntax. -# -# However, if you are in an installation where the repo admin does not (and -# should not) have shell access to the server, then allowing him to set -# arbitrary repo config options *may* be a security risk -- some config -# settings may allow executing arbitrary commands. -# -# You have 3 choices. By default $GL_GITCONFIG_KEYS is left empty, which -# completely disables this feature (meaning you cannot set git configs from -# the repo config). - -$GL_GITCONFIG_KEYS = ""; - -# The second choice is to give it a space separated list of settings you -# consider safe. (These are actually treated as a set of regular expression -# patterns, and any one of them must match). For example: -# $GL_GITCONFIG_KEYS = "core\.logAllRefUpdates core\..*compression"; -# allows repo admins to set one of those 3 config keys (yes, that second -# pattern matches two settings from "man git-config", if you look) -# -# The third choice (which you may have guessed already if you're familiar with -# regular expressions) is to allow anything and everything: -# $GL_GITCONFIG_KEYS = ".*"; - -# -------------------------------------- -# EXTERNAL COMMAND HELPER -- HTPASSWD - -# security note: runs an external command (htpasswd) with specific arguments, -# including a user-chosen "password". - -# if you want to enable the "htpasswd" command, give this the absolute path to -# whatever file apache (etc) expect to find the passwords in. - -$HTPASSWD_FILE = ""; - -# Look in doc/3 ("easier to link gitweb authorisation with gitolite" section) -# for more details on using this feature. - -# -------------------------------------- -# EXTERNAL COMMAND HELPER -- RSYNC - -# security note: runs an external command (rsync) with specific arguments, all -# presumably filled in correctly by the client-side rsync. - -# base path of all the files that are accessible via rsync. Must be an -# absolute path. Leave it undefined or set to the empty string to disable the -# rsync helper. - -$RSYNC_BASE = ""; - -# $RSYNC_BASE = "/home/git/up-down"; -# $RSYNC_BASE = "/tmp/up-down"; - -# -------------------------------------- -# EXTERNAL COMMAND HELPER -- SVNSERVE - -# security note: runs an external command (svnserve) with specific arguments, -# as specified below. %u is substituted with the username. - -# This setting allows launching svnserve when requested by the ssh client. -# This allows using the same SSH setup (hostname/username/public key) for both -# SVN and git access. Leave it undefined or set to the empty string to disable -# svnserve access. - -$SVNSERVE = ""; -# $SVNSERVE = "/usr/bin/svnserve -r /var/svn/ -t --tunnel-user=%u"; - -# -------------------------------------- -# ALLOW REPO CONFIG TO USE WILDCARDS - -# security note: this used to in a separate "wildrepos" branch. You can -# create repositories based on wild cards, give "ownership" to the specific -# user who created it, allow him/her to hand out R and RW permissions to other -# users to collaborate, etc. This is powerful stuff, and I've made it as -# secure as I can, but it hasn't had the kind of rigorous line-by-line -# analysis that the old "master" branch had. - -# This has now been rolled into master, with all the functionality gated by -# this variable. Set this to 1 if you want to enable the wildrepos features. -# Please see doc/4-wildcard-repositories.mkd for details. - -$GL_WILDREPOS = 0; - -# -------------------------------------- -# DEFAULT WILDCARD PERMISSIONS - -# If set, this value will be used as the default user-level permission rule of -# new wildcard repositories. The user can change this value with the setperms command -# as desired after repository creation; it is only a default. Note that @all can be -# used here but is special; no other groups can be used in user-level permissions. - -# $GL_WILDREPOS_DEFPERMS = 'R = @all'; - -# -------------------------------------- -# HOOK CHAINING - -# by default, the update hook in every repo chains to "update.secondary". -# Similarly, the post-update hook in the admin repo chains to -# "post-update.secondary". If you're fine with the defaults, there's no need -# to do anything here. However, if you want to use different names or paths, -# change these variables - -# $UPDATE_CHAINS_TO = "hooks/update.secondary"; -# $ADMIN_POST_UPDATE_CHAINS_TO = "hooks/post-update.secondary"; - -# -------------------------------------- -# ADMIN DEFINED COMMANDS - -# WARNING: Use this feature only if (a) you really really know what you're -# doing or (b) you really don't care too much about security. Please read -# doc/admin-defined-commands.mkd for details. - -# $GL_ADC_PATH = ""; - -# -------------------------------------- -# per perl rules, this should be the last line in such a file: -1; - -# Local variables: -# mode: perl -# End: -# vim: set syn=perl: |