From 686968381969b01ee6623d7f758bbf10e547aef9 Mon Sep 17 00:00:00 2001
From: Silvio Rhatto <rhatto@riseup.net>
Date: Thu, 7 Feb 2013 15:18:25 -0200
Subject: Adding system-wide drushrc

---
 files/drushrc.php | 346 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 346 insertions(+)
 create mode 100644 files/drushrc.php

(limited to 'files')

diff --git a/files/drushrc.php b/files/drushrc.php
new file mode 100644
index 0000000..4127ee8
--- /dev/null
+++ b/files/drushrc.php
@@ -0,0 +1,346 @@
+<?php
+
+/**
+ * Examples of valid statements for a Drush runtime config (drushrc) file.
+ * Use this file to cut down on typing out lengthy and repetitive command line
+ * options in the Drush commands you use and to avoid mistakes.
+ *
+ * Rename this file to drushrc.php and optionally copy it to one of the places
+ * listed below in order of precedence:
+ *
+ * 1.  Drupal site folder (e.g. sites/{default|example.com}/drushrc.php).
+ * 2.  Drupal /drush and sites/all/drush folders.
+ * 3.  In any location, as specified by the --config (-c) option.
+ * 4.  User's .drush folder (i.e. ~/.drush/drushrc.php).
+ * 5.  System wide configuration folder (e.g. /etc/drush/drushrc.php).
+ * 6.  Drush installation folder.
+ *
+ * If a configuration file is found in any of the above locations, it will be
+ * loaded and merged with other configuration files in the search list.
+ *
+ * If you have some configuration options that are specific to a particular
+ * version of Drush, then you may place them in a file called drush5rc.php.
+ * The version-specific file is loaded in addition to, and after, the general-
+ * purpose drushrc file.  Version-specific configuration files can be placed
+ * in any of the locations specified above.
+ *
+ * IMPORTANT NOTE regarding configuration file on Windows:
+ *
+ * For Windows 7, Windows Vista, Windows Server 2008 and later versions is the
+ * system window configuration folder C:\ProgramData\Drush.  For previous
+ * versions of Windows is the folder C:\Documents and Settings\All Users\Drush.
+ *
+ * IMPORTANT NOTE on configuration file loading:
+ *
+ * At its core, Drush works by "bootstrapping" the Drupal environment in very
+ * much the same way that is done during a normal page request from the web
+ * server, so most Drush commands run in the context of a fully-initialized
+ * website.
+ *
+ * Configuration files are loaded in the reverse order they are shown above. All
+ * configuration files are loaded in the first bootstrapping phase, but
+ * a configuration file in a specific Drupal site folder other than the default
+ * (eg, sites/example.com/drushrc.php) will not be loaded unless a specific
+ * Drupal site is selected.  However, it _will_ be loaded if a site is selected
+ * (either via the current working directory or by use of the --uri option),
+ * even if the Drush command being run does not bootstrap to the Drupal Site
+ * phase.
+ *
+ * IMPORTANT NOTE for users upgrading from Drush 4:
+ *
+ * Drush 5 no longer looks for aliases, configs or command files in the Drupal
+ * root folder, so if you previously used drushrc.php files in the Drupal root
+ * you will need to move the file to /drush or /sites/all/drush/drushrc.php.
+ *
+ * The Drush commands 'rsync' and 'sql-sync' are special cases.  These commands
+ * will load the configuration file for the site specified by the source
+ * parameter; however, they do not load the configuration file for the site
+ * specified by the destination parameter, nor do they load configuration files
+ * for remote sites.
+ *
+ * See `drush topic docs-bootstrap` for more information on how bootstrapping
+ * affects the loading of Drush configuration files.
+ */
+
+// Specify a particular multisite.
+# $options['l'] = 'http://example.com/subir';
+
+// Specify your Drupal core base directory (useful if you use symlinks).
+# $options['r'] = '/home/USER/workspace/drupal-6';
+
+/**
+ * Useful shell aliases:
+ *
+ * Drush shell aliases act similar to git aliases.  For best results, define
+ * aliases in one of the drushrc file locations between #3 through #6 above.
+ * More information on shell aliases can be found via:
+ * `drush topic docs-shell-aliases` on the command line.
+ *
+ * @see https://git.wiki.kernel.org/index.php/Aliases#Advanced
+ */
+# $options['shell-aliases']['pull'] = '!git pull'; // We've all done it.
+# $options['shell-aliases']['pulldb'] = '!git pull && drush updatedb';
+# $options['shell-aliases']['noncore'] = 'pm-list --no-core';
+# $options['shell-aliases']['wipe'] = 'cache-clear all';
+# $options['shell-aliases']['unsuck'] = 'pm-disable -y overlay,dashboard';
+# $options['shell-aliases']['offline'] = 'variable-set -y --always-set maintenance_mode 1';
+# $options['shell-aliases']['online'] = 'variable-delete -y --exact maintenance_mode';
+# $options['shell-aliases']['dis-all'] = '!drush -y dis $(drush pml --status=enabled --type=module --no-core --pipe)';
+# $options['shell-aliases']['self-alias'] = 'site-alias @self --with-db --alias-name=new';
+
+// Add a 'pm-clone' to simplify git cloning from drupal.org.
+# $options['shell-aliases']['pm-clone'] = 'pm-download --gitusername=YOURUSERNAME --package-handler=git_drupalorg';
+
+// You can create a local cache of all projects checked out using
+// --package-handler=git_drupalorg; this can be faster for repeated
+// downloads, but can be dangerous. See: http://randyfay.com/node/119
+# $options['cache'] = TRUE;
+
+/**
+ * Historical (deprecated) aliases:
+ *
+ * The following aliases were supported in Drush 4, but removed in Drush 5.  To
+ * keep using them, uncomment the following lines or copy them to your drushrc
+ * file.
+ */
+# $options['shell-aliases']['script'] = 'php-script';
+# $options['shell-aliases']['sync'] = 'core-rsync';
+# $options['shell-aliases']['installsite'] = 'site-install';
+# $options['shell-aliases']['is'] = 'site-install';
+# $options['shell-aliases']['wd'] = 'watchdog-delete';
+# $options['shell-aliases']['enable'] = 'pm-enable';
+# $options['shell-aliases']['disable'] = 'pm-disable';
+# $options['shell-aliases']['uninstall'] = 'pm-uninstall';
+# $options['shell-aliases']['sm'] = 'pm-list';
+# $options['shell-aliases']['refresh'] = 'pm-refresh';
+# $options['shell-aliases']['updatecode'] = 'pm-updatecode';
+# $options['shell-aliases']['update'] = 'pm-update';
+# $options['shell-aliases']['download'] = 'pm-download';
+
+// Load a drushrc.php configuration file from the current working directory.
+# $options['config'][] = '.';
+
+/**
+ * Enable logging and periodic upload of anonymized usage statistics. The Drush
+ * maintainers use this data to learn which commands and options are most
+ * See the usage-show and usage-send commands.
+ */
+# $options['drush_usage_log'] = TRUE;
+# $options['drush_usage_send'] = TRUE;
+
+/**
+ * By default, Drush will download projects compatible with the current
+ * version of Drupal, or, if no Drupal site is specified, then the Drupal-7
+ * version of the project is downloaded.  Set default-major to select a
+ * different default version.
+ */
+# $options['default-major'] = 6;
+
+// Clone extensions (modules, themes, etc.) from drupal.org via 'pm-download'.
+# $options['package-handler'] = 'git_drupalorg';
+
+/**
+ * Specify folders to search for Drush command files (*.drush.inc).  These
+ * values are always merged with include paths defined on the command line or
+ * in other configuration files.  On the command line, paths may be separated
+ * by a colon (:) on Unix-based systems or a semi-colon (;) on Windows.
+ */
+# $options['include'] = array('/path/to/commands','/path2/to/more/commands');
+
+/**
+ * Specify the modules to ignore when searching for command files (*.drush.inc)
+ * inside a Drupal site.
+ */
+# $options['ignored-modules'] = array('module1', 'module2');
+
+/**
+ * Specify the folders to search for Drush alias files (*.alias.drushrc.php and
+ * *.aliases.drushrc.php).  These values are always merged with alias paths
+ *  defined on the command line or in other configuration files.  On the command
+ * line, paths may be separated by a colon (:) on Unix-based systems or a
+ * semi-colon (;) on Windows.
+ */
+# $options['alias-path'] = array('/path/to/aliases','/path2/to/more/aliases');
+
+/**
+ * Specify the folder where 'sql-sync' should store persistent dump files.
+ * Keeping the dump files around improves the performance of rsync when the
+ * database is rsync'ed to a remote system.  If a dump directory is not
+ * specified, then 'sql-sync' will store dumps in temporary files.
+ */
+# $options['dump-dir'] = '/path/to/dumpdir';
+
+/**
+ * Specify the filename and path where 'sql-dump' should store backups of
+ * database dumps.  The default is to dump to STDOUT, however if this option is
+ * set in a drushrc.php file, the default behaviour can be achieved by
+ * specifying a value of FALSE ("--result-file=0" on the command line).  Two
+ * substitution tokens are available: @DATABASE is replaced with the name of the
+ * database being dumped, and @DATE is replaced with the current time and date
+ * of the dump of the form: YYYYMMDD_HHMMSS.  A value of TRUE ("--result-file=1"
+ * on the command line) will cause 'sql-dump' to use the same temporary backup
+ * location as 'pm-updatecode'.
+ */
+# $options['result-file'] = TRUE;
+# $options['result-file'] = '/path/to/backup/dir/@DATABASE_@DATE.sql';
+
+
+// Enable verbose mode.
+# $options['v'] = 1;
+
+// Show database passwords in 'status' and 'sql-conf' commands.
+# $options['show-passwords'] = 1;
+
+/**
+ * Specify the logging level for PHP notices.  Defaults to "notice".  Set to
+ * "warning" when doing Drush development.  Also make sure that error_reporting
+ * is set to E_ALL in your php configuration file.  See `drush status` for the
+ * path to your php.ini file.
+ */
+# $options['php-notices'] = 'warning';
+
+/**
+ * Specify options to pass to ssh in backend invoke.  The default is to prohibit
+ * password authentication, and is included here, so you may add additional
+ * parameters without losing the default configuration.
+ */
+# $options['ssh-options'] = '-o PasswordAuthentication=no';
+
+// Set 'remote-os' to 'Windows' to make Drush use Windows shell escape rules
+// for remote sites that do not have an 'os' item set.
+# $options['remote-os'] = 'Linux';
+
+// By default, unknown options are disallowed and result in an error.  Change
+// them to issue only a warning and let command proceed.
+# $options['strict'] = FALSE;
+
+/**
+ * Drush requires at least rsync version 2.6.4 for some functions to work
+ * correctly.  rsync version 2.6.8 or earlier may give the following error
+ * message: "--remove-source-files: unknown option".  To fix this, set
+ * $options['rsync-version'] = '2.6.8'; (replace with the lowest version of
+ * rsync installed on any system you are using with Drush).  Note that this
+ * option can also be set in a site alias, which is the preferred solution if
+ * newer versions of rsync are available on some of the systems you use.
+ * See: http://drupal.org/node/955092
+ */
+# $options['rsync-version'] = '2.6.9';
+
+/**
+ * The output charset suitable to pass to the iconv PHP function's out_charset
+ * parameter.
+ *
+ * Drush will convert its output from UTF-8 to the charset specified here.  It
+ * is possible to use //TRANSLIT and //IGNORE charset name suffixes (see iconv
+ * documentation).  If not defined, conversion will not be performed.
+ */
+# $options['output_charset'] = 'ISO-8859-1';
+# $options['output_charset'] = 'KOI8-R//IGNORE';
+# $options['output_charset'] = 'ISO-8859-1//TRANSLIT';
+
+/**
+ * Multiple-site execution options:
+ *
+ * Some drush commands such as 'sql-sync' are intended for or capable of being
+ * executed on multiple sites or server environments and will pass along the
+ * options specified here to all instances of the command being executed.
+ */
+
+/**
+ * By default, Drush will prepend the name of the site to the output of any
+ * multiple-site command execution.  To disable this behavior, set the
+ * "--no-label" option.
+ */
+# $options['no-label'] = TRUE;
+
+/**
+ * An explicit list of tables which should be included in sql-dump and sql-sync.
+ */
+# $options['tables']['common'] = array('user', 'permissions', 'role_permission', 'role');
+
+/**
+ * List of tables whose *data* is skipped by the 'sql-dump' and 'sql-sync'
+ * commands when the "--structure-tables-key=common" option is provided.
+ * You may add specific tables to the existing array or add a new element.
+ */
+# $options['structure-tables']['common'] = array('cache', 'cache_filter', 'cache_menu', 'cache_page', 'history', 'sessions', 'watchdog');
+
+/**
+ * List of tables to be omitted entirely from SQL dumps made by the 'sql-dump'
+ * and 'sql-sync' commands when the "--skip-tables-key=common" option is
+ * provided on the command line.  This is useful if your database contains
+ * non-Drupal tables used by some other application or during a migration for
+ * example.  You may add new tables to the existing array or add a new element.
+ */
+# $options['skip-tables']['common'] = array('migration_data1', 'migration_data2');
+
+/**
+ * Override specific entries in Drupal's 'variable' table or settings.php
+ */
+# $options['variables']['site_name'] = 'My Drupal site';
+# $options['variables']['theme_default'] = 'minnelli';
+# $options['variables']['anonymous'] = 'Visitor';
+
+/**
+ * Command-specific execution options:
+ *
+ * Most execution options can be shared between multiple Drush commands; these
+ * are specified as top-level elements of the $options array in the prior
+ * examples above.  On the other hand, other options are command-specific, and,
+ * in some cases, a shared option needs a different configuration depending on
+ * which command is being executing.
+ *
+ * To define options that are only applicable to certain commands, make an entry
+ * in the $command-specific array as shown below.  The name of the command may
+ * be either the command's full name or any of the command's aliases.
+ *
+ * Options defined here will be overridden by options of the same name on the
+ * command line.  Unary flags such as "--verbose" are overridden via special
+ * "--no-xxx" options (e.g. "--no-verbose").
+ *
+ * Limitation: If 'verbose' is set in a command-specific option, it must be
+ * cleared by '--no-verbose', not '--no-v', and visa-versa.
+ */
+
+// Ensure all rsync commands use verbose output.
+# $command_specific['rsync'] = array('verbose' => TRUE);
+
+// CVS credentials for module dowlnoads.
+# $command_specific['dl'] = array('cvscredentials' => 'user:pass');
+
+// Additional folders to search for scripts.
+// Separate by : (Unix-based systems) or ; (Windows).
+# $command_specific['script']['script-path'] = 'sites/all/scripts:profiles/myprofile/scripts';
+
+// Always show release notes when running pm-update or pm-updatecode.
+# $command_specific['pm-update'] = array('notes' => TRUE);
+# $command_specific['pm-updatecode'] = array('notes' => TRUE);
+
+// Set a predetermined username and password when using site-install.
+# $command_specific['site-install'] = array('account-name' => 'alice', 'account-pass' => 'secret');
+
+/**
+ * List of Drush commands or aliases that should override built-in shell
+ * functions and commands; otherwise, built-ins override Drush commands. Default
+ * is 'help,dd,sa'.  Warning: bad things can happen if you put the wrong thing
+ * here (e.g. eval, grep), so be cautious.  If a Drush command overrides a
+ * built-in command (e.g. bash help), then you can use the `builtin` operator
+ * to run the built-in version (e.g. `builtin help` to show bash help instead of
+ * Drush help.) If a Drush command overrides a shell command (e.g. grep), then
+ * you can use the regular shell command by typing in the full path to the
+ * command (e.g. /bin/grep).
+ */
+# $command_specific['core-cli'] = array('override' => 'help,dd,sa');
+
+/**
+ * Load a drushrc file from the 'drush' folder at the root of the current
+ * git repository.  Example script below by grayside.  Customize as desired.
+ * @see: http://grayside.org/node/93.
+ */
+#exec('git rev-parse --show-toplevel 2> /dev/null', $output);
+#if (!empty($output)) {
+#  $repo = $output[0];
+#  $options['config'] = $repo . '/drush/drushrc.php';
+#  $options['include'] = $repo . '/drush/commands';
+#  $options['alias-path'] = $repo . '/drush/aliases';
+#}
-- 
cgit v1.2.3