| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This brings no behaviour change yet, but will allow to set class parameters'
default value depending on system facts.
|
|
|
|
|
|
Signed-off-by: Gabriel Filion <lelutin@gmail.com>
+ more linting by intrigeri.
Conflicts:
manifests/apticron.pp
manifests/cron/dist_upgrade.pp
manifests/cron/download.pp
manifests/dist_upgrade/initiator.pp
manifests/init.pp
manifests/listchanges.pp
manifests/preferences.pp
manifests/preseeded_package.pp
manifests/proxy_client.pp
manifests/unattended_upgrades.pp
manifests/update.pp
|
|
Have the codename class parameter default to $::lsbdistcodename, and derive
$release from it.
|
|
|
|
Conflicts:
README
manifests/cron/dist_upgrade.pp
manifests/cron/download.pp
manifests/init.pp
manifests/preferences.pp
|
|
|
|
|
|
|
|
because the module
looks for a template based on the $lsbdistcodename, so you get this error:
Could not find template 'apt/Debian/preferences_n/a.erb'
The slash in 'n/a' appears to be a path (confusing!)
So I've set an error message when 'n/a' is encountered, encouraging the user to set the $lsbdistcodename.
I was not confident in the idea of pointing any occurrence of 'n/a' to the sid
templates, as I could imagine a case where this might occur on a non-sid system
where the lsbdistcodename isn't properly detected
|
|
up-to-date than cdn.debian.net
|
|
|
|
ac166366d7baa45b74e09974289d9fb2dad38e67
What happened here was the $codename = $::lsbdistcodename was removed from
init.pp and replaced with just $::lsbdistcodename whereever $codename was
used. Then in the sources.list.erb and preferences files things were changed
like this:
<pre>+### Debian current: <%= codename = scope.lookupvar('::lsbdistcodename') %>
...
-deb <%= debian_url %> <%= codename %> <%= repos %>
...
+deb <%= debian_url=scope.lookupvar('apt::debian_url') %> <%= codename %> <%= repos=scope.lookupvar('apt::repos') %>
</pre>
This meant that the codename was always set to lsbdistcodename, and you because
in newer puppet versions you cannot assign a value to a top-level facter
variable, it is not possible to change this.
Because we cannot change $lsbdistcodename, we have to fix this by allowing the
user to pass a different, non-top-level scoped variable to the class as a
parameter, which defaults to $::lsbdistcodename, so that upgrades can be
triggered.
This is documented in the README in an upgrade notice
|
|
Since Debian Squeeze, apt supports a .d directory for preferences
(pinning). Simplify management by just placing files inside this .d
directory.
This removes the need for concat and concat::fragment resources, so
removes the dependency on the concat module. It also removes the need
for a moduledir that was needed for the concat module magic, so we also
get rid of the dependency on the common module.
Signed-off-by: Gabriel Filion <lelutin@gmail.com>
|
|
This define doesn't add much of a shortcut and imposes a dependency on
the "common" module. We'll be better off with the small repetition but
less tightly coupled modules.
Sadly, the "common" module is still required, but that is going to be
the focus of the commit that follows this one.
Signed-off-by: Gabriel Filion <lelutin@gmail.com>
|
|
|
|
|
|
|
|
In newer puppet releases the old way to name class/modules with a -,
won't anymore be supported.
Conflicts:
manifests/unattended_upgrades.pp
|
|
|
|
In newer puppet releases the old way to name class/modules with a -,
won't anymore be supported.
|
|
|
|
sources_list doesn't currently force puppet to run 'apt-get update'
after creating/modifying/removing files in sources.list.d.
Signed-off-by: Gabriel Filion <lelutin@gmail.com>
|
|
The .d directories are only managed by the main 'apt' class. However,
both 'sources_list' and 'apt_conf' defines depend on those directories.
So in practice, the defines have an implicit need for those directories
to be somehow managed.
Let's turn this into an explicit relation, and include the directories
in the defines.
This makes it possible to use both defines without having to include the
main 'apt' class. (maybe when using puppet apply?)
Signed-off-by: Gabriel Filion <lelutin@gmail.com>
|
|
This reverts commit 3c0499b78d1f671fcce13127ef14b1b662a48c5a.
This was already provided by sources_list.pp.
|
|
|
|
Move this Exec to a dedicated class that is not included by default i.e. we
default not to "apt-get update" on every Puppet run.
We now make use of this class in the apt::upgrade_package define to make sure
APT indexes are up-to-date before attempting package upgrades.
One may now use the following to ensure current packages are installed by
Package resources:
include apt::update
Package { require => Exec[apt_updated] }
|
|
|
|
Lenny's APT does not support pinning like this:
Pin: release o=Debian,n=<%= codename %>
We therefore switched (in commit ef2ebdffd) to:
Pin: release o=Debian,a=<%= release %>
With such a pinning setup, when Squeeze is released, systems using this module
with $apt_use_next_release set to true would immediately switch to prefer
packages from Squeeze. If an automated upgrade process is setup, they would be
automatically upgraded to Squeeze.
This does not sound safe to me, so let's use the release version number as an
additional selection criterion to prevent upgrades to Squeeze to happen behind
our back:
Pin: release o=Debian,a=<%= release %>,v=<%= release_version %>*
Note that the trailing '*' is intentional and necessary to match stable
point-releases.
|
|
|
|
the alias metaparameter.
the reason for this change was because the Exec override was not able to find the exec through its alias
|
|
|
|
The CDN checks your IP and uses the Max-Mind geoIP DB to determine your location and then uses your local country Debian Mirror, or if your local country doesn't have a debian mirror, it uses the local continent. It automatically checks and prunes dead mirrors. the technology for the Debian CDN setup is still improving, I believe that ASN-number associations are the next step to attempt to make more informed, finer-grained choices.
This is more useful than using ftp.debian.org because that is just a round-robin DNS entry that could get you any mirror anywhere.
|
|
Before you only had the choice of setting a 03clean apt configuration for either
all hosts, or every single host. Setting it to have the recommended settings for
vservers for all hosts meant that you were setting it for non-vservers as well
as vservers. The other option you had was to set it per host. This was a bit
annoying if you have any more than one vserver because you would need to create
a 03clean for every single vserver guest.
This change auto-detects if the node is a vserver, and if it is it automatically
installs the 03clean_vserver file, with the recommended DSelect::Clean settings,
and allows you to override this for all of your vservers, or for specific hosts.
|
|
|
|
A bunch of painlessly merged commits.
Conflicts:
manifests/init.pp
|
|
Conflicts:
manifests/init.pp
|
|
One more painless merge commit.
Conflicts:
manifests/init.pp
|
|
Going on merging immerda changes.
Incompatible change: I do prefer my own generic apt/preferences template to
shipping a static file that only supports Lenny. My own template supports
security, backports, volatile, next release etc.
Conflicts:
files/preferences
manifests/init.pp
manifests/preferences.pp
|
|
(Starting to merge changes from immerda.)
Conflicts:
manifests/default_sources_list.pp
manifests/init.pp
|
|
Let's set refreshonly on the 'update_apt' Exec (aliased to 'apt_updated')
instead of removing it for backward compatibility: it may be in use at some
places to trigger updates.
|
|
Conflicts:
README
manifests/custom_sources.pp
manifests/default_preferences.pp
manifests/init.pp
manifests/unattended_upgrades.pp
templates/Debian/sources.list.volatile.erb
|
|
Add a file resource on the apt/sources.list.d directory to ensure that
it is created as a directory and watch it for modifications to
automatically refresh the apt cache.
Signed-off-by: Gabriel Filion <lelutin@gmail.com>
|
|
Unattended upgrades are not always necessary. Including the
apt::unattended_upgrades class through the main apt class is not
appropriate. It is better to make nodes include the
apt::unattended_upgrades class explicitly.
Remove the $apt_unattended_upgrades variable along with the include in
the 'apt' class.
Signed-off-by: Gabriel Filion <lelutin@gmail.com>
|
|
Currently, setting the $custom_preferences variable to false fails
because of the /etc/apt/preferences concatenated_file being re-defined.
Fix this by setting dependencies on the resource only when we expect to
create the /etc/apt/preferences file. Also, since there is no "ensure"
parameter to concatenated_file, use a simple file resource to ensure
that it is removed.
Signed-off-by: Gabriel Filion <lelutin@gmail.com>
|
|
Currently, it's either we use the default source that's hardcoded in the
sources.list template or we redefine entirely this template.
Make it easier to just change the URL of the apt source while using the
rest of the default template by adding a $main_apt_source variable.
Signed-off-by: Gabriel Filion <lelutin@gmail.com>
|
|
This variable was deprecated in favor of using a list of file sources.
to change the value of the 'clean' property, you can either define a
file '03clean' in a site-apt module, or a per-host '$fqdn/03clean' file
in the same site-apt module.
Also, move the moduledir stuff below nearer to where it's actually used.
Signed-off-by: Gabriel Filion <lelutin@gmail.com>
|
|
remove the use of _snippet in names (except for preferences_snippet) so
that they represent directly a resource name.
rename custom_sources_template to sources_list.
modify sources_list to make it more flexible (gives the opportunity to
provide sources or content). this changes its behaviour in that the name
is now the name of the file in sources.list.d
rename proxy-client to proxy_client to use the same standard for its
name as the other classes.
Signed-off-by: Gabriel Filion <lelutin@gmail.com>
|
